| Top |
GInterface ╰── PhoshDBusDisplayConfig GObject ├── GDBusInterfaceSkeleton │ ╰── PhoshDBusDisplayConfigSkeleton │ ╰── PhoshMonitorManager ╰── GDBusProxy ╰── PhoshDBusDisplayConfigProxy
PhoshDBusDisplayConfigProxy implements GDBusInterface, GInitable, GAsyncInitable and PhoshDBusDisplayConfig.
PhoshDBusDisplayConfigSkeleton implements GDBusInterface and PhoshDBusDisplayConfig.
PhoshDBusDisplayConfig is implemented by PhoshDBusDisplayConfigProxy, PhoshDBusDisplayConfigSkeleton and PhoshMonitorManager.
GDBusInterfaceInfo *
phosh_dbus_display_config_interface_info
(void);
Gets a machine-readable description of the org.gnome.Mutter.DisplayConfig D-Bus interface.
guint phosh_dbus_display_config_override_properties (GObjectClass *klass,guint property_id_begin);
Overrides all GObject properties in the PhoshDBusDisplayConfig interface for a concrete class. The properties are overridden in the order they are defined.
klass |
The class structure for a GObject derived class. |
|
property_id_begin |
The property id to assign to the first overridden property. |
void phosh_dbus_display_config_complete_get_resources (PhoshDBusDisplayConfig *object,GDBusMethodInvocation *invocation,guint serial,GVariant *crtcs,GVariant *outputs,GVariant *modes,gint max_screen_width,gint max_screen_height);
Helper function used in service implementations to finish handling invocations of the GetResources()g_dbus_method_invocation_return_error() or similar.
This method will free invocation
, you cannot use it afterwards.
void phosh_dbus_display_config_complete_apply_configuration (PhoshDBusDisplayConfig *object,GDBusMethodInvocation *invocation);
Helper function used in service implementations to finish handling invocations of the ApplyConfiguration()g_dbus_method_invocation_return_error() or similar.
This method will free invocation
, you cannot use it afterwards.
void phosh_dbus_display_config_complete_change_backlight (PhoshDBusDisplayConfig *object,GDBusMethodInvocation *invocation,gint new_value);
Helper function used in service implementations to finish handling invocations of the ChangeBacklight()g_dbus_method_invocation_return_error() or similar.
This method will free invocation
, you cannot use it afterwards.
void phosh_dbus_display_config_complete_get_crtc_gamma (PhoshDBusDisplayConfig *object,GDBusMethodInvocation *invocation,GVariant *red,GVariant *green,GVariant *blue);
Helper function used in service implementations to finish handling invocations of the GetCrtcGamma()g_dbus_method_invocation_return_error() or similar.
This method will free invocation
, you cannot use it afterwards.
void phosh_dbus_display_config_complete_set_crtc_gamma (PhoshDBusDisplayConfig *object,GDBusMethodInvocation *invocation);
Helper function used in service implementations to finish handling invocations of the SetCrtcGamma()g_dbus_method_invocation_return_error() or similar.
This method will free invocation
, you cannot use it afterwards.
void phosh_dbus_display_config_complete_get_current_state (PhoshDBusDisplayConfig *object,GDBusMethodInvocation *invocation,guint serial,GVariant *monitors,GVariant *logical_monitors,GVariant *properties);
Helper function used in service implementations to finish handling invocations of the GetCurrentState()g_dbus_method_invocation_return_error() or similar.
This method will free invocation
, you cannot use it afterwards.
void phosh_dbus_display_config_complete_apply_monitors_config (PhoshDBusDisplayConfig *object,GDBusMethodInvocation *invocation);
Helper function used in service implementations to finish handling invocations of the ApplyMonitorsConfig()g_dbus_method_invocation_return_error() or similar.
This method will free invocation
, you cannot use it afterwards.
void
phosh_dbus_display_config_emit_monitors_changed
(PhoshDBusDisplayConfig *object);
Emits the "MonitorsChanged" D-Bus signal.
void phosh_dbus_display_config_call_get_resources (PhoshDBusDisplayConfig *proxy,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the GetResources()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call phosh_dbus_display_config_call_get_resources_finish() to get the result of the operation.
See phosh_dbus_display_config_call_get_resources_sync() for the synchronous, blocking version of this method.
proxy |
||
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean phosh_dbus_display_config_call_get_resources_finish (PhoshDBusDisplayConfig *proxy,guint *out_serial,GVariant **out_crtcs,GVariant **out_outputs,GVariant **out_modes,gint *out_max_screen_width,gint *out_max_screen_height,GAsyncResult *res,GError **error);
Finishes an operation started with phosh_dbus_display_config_call_get_resources().
proxy |
||
out_serial |
Return location for return parameter or |
[out][optional] |
out_crtcs |
Return location for return parameter or |
[out][optional] |
out_outputs |
Return location for return parameter or |
[out][optional] |
out_modes |
Return location for return parameter or |
[out][optional] |
out_max_screen_width |
Return location for return parameter or |
[out][optional] |
out_max_screen_height |
Return location for return parameter or |
[out][optional] |
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean phosh_dbus_display_config_call_get_resources_sync (PhoshDBusDisplayConfig *proxy,guint *out_serial,GVariant **out_crtcs,GVariant **out_outputs,GVariant **out_modes,gint *out_max_screen_width,gint *out_max_screen_height,GCancellable *cancellable,GError **error);
Synchronously invokes the GetResources()proxy
. The calling thread is blocked until a reply is received.
See phosh_dbus_display_config_call_get_resources() for the asynchronous version of this method.
proxy |
||
out_serial |
Return location for return parameter or |
[out][optional] |
out_crtcs |
Return location for return parameter or |
[out][optional] |
out_outputs |
Return location for return parameter or |
[out][optional] |
out_modes |
Return location for return parameter or |
[out][optional] |
out_max_screen_width |
Return location for return parameter or |
[out][optional] |
out_max_screen_height |
Return location for return parameter or |
[out][optional] |
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void phosh_dbus_display_config_call_apply_configuration (PhoshDBusDisplayConfig *proxy,guint arg_serial,gboolean arg_persistent,GVariant *arg_crtcs,GVariant *arg_outputs,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the ApplyConfiguration()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call phosh_dbus_display_config_call_apply_configuration_finish() to get the result of the operation.
See phosh_dbus_display_config_call_apply_configuration_sync() for the synchronous, blocking version of this method.
proxy |
||
arg_serial |
Argument to pass with the method invocation. |
|
arg_persistent |
Argument to pass with the method invocation. |
|
arg_crtcs |
Argument to pass with the method invocation. |
|
arg_outputs |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean phosh_dbus_display_config_call_apply_configuration_finish (PhoshDBusDisplayConfig *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with phosh_dbus_display_config_call_apply_configuration().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean phosh_dbus_display_config_call_apply_configuration_sync (PhoshDBusDisplayConfig *proxy,guint arg_serial,gboolean arg_persistent,GVariant *arg_crtcs,GVariant *arg_outputs,GCancellable *cancellable,GError **error);
Synchronously invokes the ApplyConfiguration()proxy
. The calling thread is blocked until a reply is received.
See phosh_dbus_display_config_call_apply_configuration() for the asynchronous version of this method.
proxy |
||
arg_serial |
Argument to pass with the method invocation. |
|
arg_persistent |
Argument to pass with the method invocation. |
|
arg_crtcs |
Argument to pass with the method invocation. |
|
arg_outputs |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void phosh_dbus_display_config_call_change_backlight (PhoshDBusDisplayConfig *proxy,guint arg_serial,guint arg_output,gint arg_value,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the ChangeBacklight()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call phosh_dbus_display_config_call_change_backlight_finish() to get the result of the operation.
See phosh_dbus_display_config_call_change_backlight_sync() for the synchronous, blocking version of this method.
proxy |
||
arg_serial |
Argument to pass with the method invocation. |
|
arg_output |
Argument to pass with the method invocation. |
|
arg_value |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean phosh_dbus_display_config_call_change_backlight_finish (PhoshDBusDisplayConfig *proxy,gint *out_new_value,GAsyncResult *res,GError **error);
Finishes an operation started with phosh_dbus_display_config_call_change_backlight().
proxy |
||
out_new_value |
Return location for return parameter or |
[out][optional] |
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean phosh_dbus_display_config_call_change_backlight_sync (PhoshDBusDisplayConfig *proxy,guint arg_serial,guint arg_output,gint arg_value,gint *out_new_value,GCancellable *cancellable,GError **error);
Synchronously invokes the ChangeBacklight()proxy
. The calling thread is blocked until a reply is received.
See phosh_dbus_display_config_call_change_backlight() for the asynchronous version of this method.
proxy |
||
arg_serial |
Argument to pass with the method invocation. |
|
arg_output |
Argument to pass with the method invocation. |
|
arg_value |
Argument to pass with the method invocation. |
|
out_new_value |
Return location for return parameter or |
[out][optional] |
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void phosh_dbus_display_config_call_get_crtc_gamma (PhoshDBusDisplayConfig *proxy,guint arg_serial,guint arg_crtc,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the GetCrtcGamma()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call phosh_dbus_display_config_call_get_crtc_gamma_finish() to get the result of the operation.
See phosh_dbus_display_config_call_get_crtc_gamma_sync() for the synchronous, blocking version of this method.
proxy |
||
arg_serial |
Argument to pass with the method invocation. |
|
arg_crtc |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean phosh_dbus_display_config_call_get_crtc_gamma_finish (PhoshDBusDisplayConfig *proxy,GVariant **out_red,GVariant **out_green,GVariant **out_blue,GAsyncResult *res,GError **error);
Finishes an operation started with phosh_dbus_display_config_call_get_crtc_gamma().
proxy |
||
out_red |
Return location for return parameter or |
[out][optional] |
out_green |
Return location for return parameter or |
[out][optional] |
out_blue |
Return location for return parameter or |
[out][optional] |
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean phosh_dbus_display_config_call_get_crtc_gamma_sync (PhoshDBusDisplayConfig *proxy,guint arg_serial,guint arg_crtc,GVariant **out_red,GVariant **out_green,GVariant **out_blue,GCancellable *cancellable,GError **error);
Synchronously invokes the GetCrtcGamma()proxy
. The calling thread is blocked until a reply is received.
See phosh_dbus_display_config_call_get_crtc_gamma() for the asynchronous version of this method.
proxy |
||
arg_serial |
Argument to pass with the method invocation. |
|
arg_crtc |
Argument to pass with the method invocation. |
|
out_red |
Return location for return parameter or |
[out][optional] |
out_green |
Return location for return parameter or |
[out][optional] |
out_blue |
Return location for return parameter or |
[out][optional] |
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void phosh_dbus_display_config_call_set_crtc_gamma (PhoshDBusDisplayConfig *proxy,guint arg_serial,guint arg_crtc,GVariant *arg_red,GVariant *arg_green,GVariant *arg_blue,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the SetCrtcGamma()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call phosh_dbus_display_config_call_set_crtc_gamma_finish() to get the result of the operation.
See phosh_dbus_display_config_call_set_crtc_gamma_sync() for the synchronous, blocking version of this method.
proxy |
||
arg_serial |
Argument to pass with the method invocation. |
|
arg_crtc |
Argument to pass with the method invocation. |
|
arg_red |
Argument to pass with the method invocation. |
|
arg_green |
Argument to pass with the method invocation. |
|
arg_blue |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean phosh_dbus_display_config_call_set_crtc_gamma_finish (PhoshDBusDisplayConfig *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with phosh_dbus_display_config_call_set_crtc_gamma().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean phosh_dbus_display_config_call_set_crtc_gamma_sync (PhoshDBusDisplayConfig *proxy,guint arg_serial,guint arg_crtc,GVariant *arg_red,GVariant *arg_green,GVariant *arg_blue,GCancellable *cancellable,GError **error);
Synchronously invokes the SetCrtcGamma()proxy
. The calling thread is blocked until a reply is received.
See phosh_dbus_display_config_call_set_crtc_gamma() for the asynchronous version of this method.
proxy |
||
arg_serial |
Argument to pass with the method invocation. |
|
arg_crtc |
Argument to pass with the method invocation. |
|
arg_red |
Argument to pass with the method invocation. |
|
arg_green |
Argument to pass with the method invocation. |
|
arg_blue |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void phosh_dbus_display_config_call_get_current_state (PhoshDBusDisplayConfig *proxy,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the GetCurrentState()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call phosh_dbus_display_config_call_get_current_state_finish() to get the result of the operation.
See phosh_dbus_display_config_call_get_current_state_sync() for the synchronous, blocking version of this method.
proxy |
||
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean phosh_dbus_display_config_call_get_current_state_finish (PhoshDBusDisplayConfig *proxy,guint *out_serial,GVariant **out_monitors,GVariant **out_logical_monitors,GVariant **out_properties,GAsyncResult *res,GError **error);
Finishes an operation started with phosh_dbus_display_config_call_get_current_state().
proxy |
||
out_serial |
Return location for return parameter or |
[out][optional] |
out_monitors |
Return location for return parameter or |
[out][optional] |
out_logical_monitors |
Return location for return parameter or |
[out][optional] |
out_properties |
Return location for return parameter or |
[out][optional] |
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean phosh_dbus_display_config_call_get_current_state_sync (PhoshDBusDisplayConfig *proxy,guint *out_serial,GVariant **out_monitors,GVariant **out_logical_monitors,GVariant **out_properties,GCancellable *cancellable,GError **error);
Synchronously invokes the GetCurrentState()proxy
. The calling thread is blocked until a reply is received.
See phosh_dbus_display_config_call_get_current_state() for the asynchronous version of this method.
proxy |
||
out_serial |
Return location for return parameter or |
[out][optional] |
out_monitors |
Return location for return parameter or |
[out][optional] |
out_logical_monitors |
Return location for return parameter or |
[out][optional] |
out_properties |
Return location for return parameter or |
[out][optional] |
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void phosh_dbus_display_config_call_apply_monitors_config (PhoshDBusDisplayConfig *proxy,guint arg_serial,guint arg_method,GVariant *arg_logical_monitors,GVariant *arg_properties,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the ApplyMonitorsConfig()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call phosh_dbus_display_config_call_apply_monitors_config_finish() to get the result of the operation.
See phosh_dbus_display_config_call_apply_monitors_config_sync() for the synchronous, blocking version of this method.
proxy |
||
arg_serial |
Argument to pass with the method invocation. |
|
arg_method |
Argument to pass with the method invocation. |
|
arg_logical_monitors |
Argument to pass with the method invocation. |
|
arg_properties |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean phosh_dbus_display_config_call_apply_monitors_config_finish (PhoshDBusDisplayConfig *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with phosh_dbus_display_config_call_apply_monitors_config().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean phosh_dbus_display_config_call_apply_monitors_config_sync (PhoshDBusDisplayConfig *proxy,guint arg_serial,guint arg_method,GVariant *arg_logical_monitors,GVariant *arg_properties,GCancellable *cancellable,GError **error);
Synchronously invokes the ApplyMonitorsConfig()proxy
. The calling thread is blocked until a reply is received.
See phosh_dbus_display_config_call_apply_monitors_config() for the asynchronous version of this method.
proxy |
||
arg_serial |
Argument to pass with the method invocation. |
|
arg_method |
Argument to pass with the method invocation. |
|
arg_logical_monitors |
Argument to pass with the method invocation. |
|
arg_properties |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
gint
phosh_dbus_display_config_get_power_save_mode
(PhoshDBusDisplayConfig *object);
Gets the value of the "PowerSaveMode" D-Bus property.
Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side.
[skip]
void phosh_dbus_display_config_set_power_save_mode (PhoshDBusDisplayConfig *object,gint value);
Sets the "PowerSaveMode" D-Bus property to value
.
Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side.
[skip]
gboolean
phosh_dbus_display_config_get_panel_orientation_managed
(PhoshDBusDisplayConfig *object);
Gets the value of the "PanelOrientationManaged" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
void phosh_dbus_display_config_set_panel_orientation_managed (PhoshDBusDisplayConfig *object,gboolean value);
Sets the "PanelOrientationManaged" D-Bus property to value
.
Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.
[skip]
void phosh_dbus_display_config_proxy_new (GDBusConnection *connection,GDBusProxyFlags flags,const gchar *name,const gchar *object_path,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously creates a proxy for the D-Bus interface org.gnome.Mutter.DisplayConfig. See g_dbus_proxy_new() for more details.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call phosh_dbus_display_config_proxy_new_finish() to get the result of the operation.
See phosh_dbus_display_config_proxy_new_sync() for the synchronous, blocking version of this constructor.
connection |
||
flags |
Flags from the GDBusProxyFlags enumeration. |
|
name |
A bus name (well-known or unique) or |
[nullable] |
object_path |
An object path. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied. |
|
user_data |
User data to pass to |
PhoshDBusDisplayConfig * phosh_dbus_display_config_proxy_new_finish (GAsyncResult *res,GError **error);
Finishes an operation started with phosh_dbus_display_config_proxy_new().
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
The constructed proxy object or NULL if error
is set.
[transfer full][type PhoshDBusDisplayConfigProxy]
PhoshDBusDisplayConfig * phosh_dbus_display_config_proxy_new_sync (GDBusConnection *connection,GDBusProxyFlags flags,const gchar *name,const gchar *object_path,GCancellable *cancellable,GError **error);
Synchronously creates a proxy for the D-Bus interface org.gnome.Mutter.DisplayConfig. See g_dbus_proxy_new_sync() for more details.
The calling thread is blocked until a reply is received.
See phosh_dbus_display_config_proxy_new() for the asynchronous version of this constructor.
connection |
||
flags |
Flags from the GDBusProxyFlags enumeration. |
|
name |
A bus name (well-known or unique) or |
[nullable] |
object_path |
An object path. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
The constructed proxy object or NULL if error
is set.
[transfer full][type PhoshDBusDisplayConfigProxy]
void phosh_dbus_display_config_proxy_new_for_bus (GBusType bus_type,GDBusProxyFlags flags,const gchar *name,const gchar *object_path,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Like phosh_dbus_display_config_proxy_new() but takes a GBusType instead of a GDBusConnection.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call phosh_dbus_display_config_proxy_new_for_bus_finish() to get the result of the operation.
See phosh_dbus_display_config_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.
bus_type |
A GBusType. |
|
flags |
Flags from the GDBusProxyFlags enumeration. |
|
name |
A bus name (well-known or unique). |
|
object_path |
An object path. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied. |
|
user_data |
User data to pass to |
PhoshDBusDisplayConfig * phosh_dbus_display_config_proxy_new_for_bus_finish (GAsyncResult *res,GError **error);
Finishes an operation started with phosh_dbus_display_config_proxy_new_for_bus().
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
The constructed proxy object or NULL if error
is set.
[transfer full][type PhoshDBusDisplayConfigProxy]
PhoshDBusDisplayConfig * phosh_dbus_display_config_proxy_new_for_bus_sync (GBusType bus_type,GDBusProxyFlags flags,const gchar *name,const gchar *object_path,GCancellable *cancellable,GError **error);
Like phosh_dbus_display_config_proxy_new_sync() but takes a GBusType instead of a GDBusConnection.
The calling thread is blocked until a reply is received.
See phosh_dbus_display_config_proxy_new_for_bus() for the asynchronous version of this constructor.
bus_type |
A GBusType. |
|
flags |
Flags from the GDBusProxyFlags enumeration. |
|
name |
A bus name (well-known or unique). |
|
object_path |
An object path. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
The constructed proxy object or NULL if error
is set.
[transfer full][type PhoshDBusDisplayConfigProxy]
PhoshDBusDisplayConfig *
phosh_dbus_display_config_skeleton_new
(void);
Creates a skeleton object for the D-Bus interface org.gnome.Mutter.DisplayConfig.
struct PhoshDBusDisplayConfigIface {
GTypeInterface parent_iface;
gboolean (*handle_apply_configuration) (
PhoshDBusDisplayConfig *object,
GDBusMethodInvocation *invocation,
guint arg_serial,
gboolean arg_persistent,
GVariant *arg_crtcs,
GVariant *arg_outputs);
gboolean (*handle_apply_monitors_config) (
PhoshDBusDisplayConfig *object,
GDBusMethodInvocation *invocation,
guint arg_serial,
guint arg_method,
GVariant *arg_logical_monitors,
GVariant *arg_properties);
gboolean (*handle_change_backlight) (
PhoshDBusDisplayConfig *object,
GDBusMethodInvocation *invocation,
guint arg_serial,
guint arg_output,
gint arg_value);
gboolean (*handle_get_crtc_gamma) (
PhoshDBusDisplayConfig *object,
GDBusMethodInvocation *invocation,
guint arg_serial,
guint arg_crtc);
gboolean (*handle_get_current_state) (
PhoshDBusDisplayConfig *object,
GDBusMethodInvocation *invocation);
gboolean (*handle_get_resources) (
PhoshDBusDisplayConfig *object,
GDBusMethodInvocation *invocation);
gboolean (*handle_set_crtc_gamma) (
PhoshDBusDisplayConfig *object,
GDBusMethodInvocation *invocation,
guint arg_serial,
guint arg_crtc,
GVariant *arg_red,
GVariant *arg_green,
GVariant *arg_blue);
gboolean (*get_panel_orientation_managed) (PhoshDBusDisplayConfig *object);
gint (*get_power_save_mode) (PhoshDBusDisplayConfig *object);
void (*monitors_changed) (
PhoshDBusDisplayConfig *object);
};
Virtual table for the D-Bus interface org.gnome.Mutter.DisplayConfig.
GTypeInterface |
The parent interface. |
|
Handler for the “handle-apply-configuration” signal. |
||
Handler for the “handle-apply-monitors-config” signal. |
||
Handler for the “handle-change-backlight” signal. |
||
Handler for the “handle-get-crtc-gamma” signal. |
||
Handler for the “handle-get-current-state” signal. |
||
Handler for the “handle-get-resources” signal. |
||
Handler for the “handle-set-crtc-gamma” signal. |
||
Getter for the “panel-orientation-managed” property. |
||
Getter for the “power-save-mode” property. |
||
Handler for the “monitors-changed” signal. |
struct PhoshDBusDisplayConfigProxy;
The PhoshDBusDisplayConfigProxy structure contains only private data and should only be accessed using the provided API.
struct PhoshDBusDisplayConfigProxyClass {
GDBusProxyClass parent_class;
};
Class structure for PhoshDBusDisplayConfigProxy.
struct PhoshDBusDisplayConfigSkeleton;
The PhoshDBusDisplayConfigSkeleton structure contains only private data and should only be accessed using the provided API.
struct PhoshDBusDisplayConfigSkeletonClass {
GDBusInterfaceSkeletonClass parent_class;
};
Class structure for PhoshDBusDisplayConfigSkeleton.
typedef struct _PhoshDBusDisplayConfig PhoshDBusDisplayConfig;
Abstract interface type for the D-Bus interface org.gnome.Mutter.DisplayConfig.
typedef struct _PhoshDBusDisplayConfigProxyPrivate PhoshDBusDisplayConfigProxyPrivate;
“panel-orientation-managed” property“panel-orientation-managed” gboolean
Represents the D-Bus property "PanelOrientationManaged".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: PhoshDBusDisplayConfig
Flags: Read / Write
Default value: FALSE
“power-save-mode” property “power-save-mode” int
Represents the D-Bus property "PowerSaveMode".
Since the D-Bus property for this GObject property is both readable and writable, it is meaningful to both read from it and write to it on both the service- and client-side.
Owner: PhoshDBusDisplayConfig
Flags: Read / Write
Default value: 0
“handle-apply-configuration” signalgboolean user_function (PhoshDBusDisplayConfig *object, GDBusMethodInvocation *invocation, guint arg_serial, gboolean arg_persistent, GVariant *arg_crtcs, GVariant *arg_outputs, gpointer user_data)
Signal emitted when a remote caller is invoking the ApplyConfiguration()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call phosh_dbus_display_config_complete_apply_configuration() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
||
invocation |
||
arg_serial |
Argument passed by remote caller. |
|
arg_persistent |
Argument passed by remote caller. |
|
arg_crtcs |
Argument passed by remote caller. |
|
arg_outputs |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last
“handle-apply-monitors-config” signalgboolean user_function (PhoshDBusDisplayConfig *object, GDBusMethodInvocation *invocation, guint arg_serial, guint arg_method, GVariant *arg_logical_monitors, GVariant *arg_properties, gpointer user_data)
Signal emitted when a remote caller is invoking the ApplyMonitorsConfig()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call phosh_dbus_display_config_complete_apply_monitors_config() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
||
invocation |
||
arg_serial |
Argument passed by remote caller. |
|
arg_method |
Argument passed by remote caller. |
|
arg_logical_monitors |
Argument passed by remote caller. |
|
arg_properties |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last
“handle-change-backlight” signalgboolean user_function (PhoshDBusDisplayConfig *object, GDBusMethodInvocation *invocation, guint arg_serial, guint arg_output, int arg_value, gpointer user_data)
Signal emitted when a remote caller is invoking the ChangeBacklight()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call phosh_dbus_display_config_complete_change_backlight() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
||
invocation |
||
arg_serial |
Argument passed by remote caller. |
|
arg_output |
Argument passed by remote caller. |
|
arg_value |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last
“handle-get-crtc-gamma” signalgboolean user_function (PhoshDBusDisplayConfig *object, GDBusMethodInvocation *invocation, guint arg_serial, guint arg_crtc, gpointer user_data)
Signal emitted when a remote caller is invoking the GetCrtcGamma()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call phosh_dbus_display_config_complete_get_crtc_gamma() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
||
invocation |
||
arg_serial |
Argument passed by remote caller. |
|
arg_crtc |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last
“handle-get-current-state” signalgboolean user_function (PhoshDBusDisplayConfig *object, GDBusMethodInvocation *invocation, gpointer user_data)
Signal emitted when a remote caller is invoking the GetCurrentState()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call phosh_dbus_display_config_complete_get_current_state() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last
“handle-get-resources” signalgboolean user_function (PhoshDBusDisplayConfig *object, GDBusMethodInvocation *invocation, gpointer user_data)
Signal emitted when a remote caller is invoking the GetResources()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call phosh_dbus_display_config_complete_get_resources() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last
“handle-set-crtc-gamma” signalgboolean user_function (PhoshDBusDisplayConfig *object, GDBusMethodInvocation *invocation, guint arg_serial, guint arg_crtc, GVariant *arg_red, GVariant *arg_green, GVariant *arg_blue, gpointer user_data)
Signal emitted when a remote caller is invoking the SetCrtcGamma()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call phosh_dbus_display_config_complete_set_crtc_gamma() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
||
invocation |
||
arg_serial |
Argument passed by remote caller. |
|
arg_crtc |
Argument passed by remote caller. |
|
arg_red |
Argument passed by remote caller. |
|
arg_green |
Argument passed by remote caller. |
|
arg_blue |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last
“monitors-changed” signalvoid user_function (PhoshDBusDisplayConfig *object, gpointer user_data)
On the client-side, this signal is emitted whenever the D-Bus signal "MonitorsChanged" is received.
On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
Flags: Run Last