 -----------------------------------------------------------------------
 Password Plugin for Roundcube
 -----------------------------------------------------------------------
 Plugin that adds a possibility to change user password using many
 methods (drivers) via Settings/Password tab.
 -----------------------------------------------------------------------
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 3 of the License, or
 (at your option) any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program. If not, see http://www.gnu.org/licenses/.

 @author Aleksander Machniak <alec@alec.pl>
 @author <see driver files for driver authors>
 -----------------------------------------------------------------------

 1.      Configuration
 2.      Drivers
 2.1.    Password Change Drivers
 2.1.1.  Database (sql)
 2.1.2.  Cyrus/SASL (sasl)
 2.1.3.  Poppassd/Courierpassd (poppassd)
 2.1.4.  LDAP (ldap)
 2.1.5.  DirectAdmin Control Panel (directadmin)
 2.1.6.  cPanel
 2.1.7.  XIMSS/Communigate (ximms)
 2.1.9.  hMailServer (hmail)
 2.1.10. PAM (pam)
 2.1.11. Chpasswd (chpasswd)
 2.1.12. LDAP - no PEAR (ldap_simple)
 2.1.13. XMail (xmail)
 2.1.14. Pw (pw_usermod)
 2.1.15. domainFACTORY (domainfactory)
 2.1.16. DBMail (dbmail)
 2.1.17. Expect (expect)
 2.1.18. Samba (smb)
 2.1.19. Vpopmail daemon (vpopmaild)
 2.1.20. Plesk (Plesk RPC-API)
 2.1.21. Kpasswd
 2.1.22. Modoboa
 2.1.23. LDAP - Password Modify Extended Operation (ldap_exop)
 2.1.24. TinyCP
 2.1.25. Mail-in-a-Box (miab)
 2.1.26. HTTP-API (httpapi)
 2.1.27. dovecot_passwdfile
 2.1.28. Mailcow
 2.1.29. LDAP Samba Active Directory (ldap_samba_ad)
 2.1.30. Stalwart
 2.2.    Password Strength Drivers
 2.2.1.  Zxcvbn
 2.2.2.  Have I been pwned? (pwned)
 3.      Driver API
 4.      Sudo setup


 1. Configuration
 ----------------

 Copy config.inc.php.dist to config.inc.php and set the options as described
 within the file.


 2. Drivers
 ----------


 2.1. Password Change Drivers
 ----------------------------

 Password plugin supports many password change mechanisms which are
 handled by included drivers. Just pass driver name in 'password_driver' option.


 2.1.1. Database (sql)
 ---------------------

 You can specify which database to connect by 'password_db_dsn' option and
 what SQL query to execute by 'password_query'. See config.inc.php.dist file for
 more info.

 Example implementations of an update_passwd function:

 - This is for use with LMS (http://lms.org.pl) database and postgres:

    CREATE OR REPLACE FUNCTION update_passwd(hash text, account text) RETURNS integer AS $$
    DECLARE
            res integer;
    BEGIN
        UPDATE passwd SET password = hash
        WHERE login = split_part(account, '@', 1)
            AND domainid = (SELECT id FROM domains WHERE name = split_part(account, '@', 2))
        RETURNING id INTO res;
        RETURN res;
    END;
    $$ LANGUAGE plpgsql SECURITY DEFINER;

 - This is for use with a SELECT update_passwd(%o,%P,%u) query
   Updates the password only when the old password matches the MD5 password
   in the database

    CREATE FUNCTION update_password (oldpass text, cryptpass text, user text) RETURNS text
        MODIFIES SQL DATA
    BEGIN
        DECLARE currentsalt varchar(20);
        DECLARE error text;
        SET error = 'incorrect current password';
        SELECT substring_index(substr(user.password,4),_latin1'$',1) INTO currentsalt FROM users WHERE username=user;
        SELECT '' INTO error FROM users WHERE username=user AND password=ENCRYPT(oldpass,currentsalt);
        UPDATE users SET password=cryptpass WHERE username=user AND password=ENCRYPT(oldpass,currentsalt);
        RETURN error;
    END

 Example SQL UPDATEs:

 - Plain text passwords:
    UPDATE users SET password=%p WHERE username=%u AND password=%o AND domain=%h LIMIT 1

 - Crypt text passwords:
    UPDATE users SET password=%P WHERE username=%u LIMIT 1

 - Use a MYSQL crypt function (*nix only) with random 8 character salt
    UPDATE users SET password=ENCRYPT(%p,concat(_utf8'$1$',right(md5(rand()),8),_utf8'$')) WHERE username=%u LIMIT 1

 - MD5 stored passwords:
    UPDATE users SET password=MD5(%p) WHERE username=%u AND password=MD5(%o) LIMIT 1


 2.1.2. Cyrus/SASL (sasl)
 ------------------------

 Cyrus SASL database authentication allows your Cyrus+Roundcube
 installation to host mail users without requiring a Unix Shell account!

 This driver only covers the "sasldb" case when using Cyrus SASL. Kerberos
 and PAM authentication mechanisms will require other techniques to enable
 user password manipulations.

 Cyrus SASL includes a shell utility called "saslpasswd" for manipulating
 user passwords in the "sasldb" database.  This plugin attempts to use
 this utility to perform password manipulations required by your webmail
 users without any administrative interaction. Unfortunately, this
 scheme requires that the "saslpasswd" utility be run as the "cyrus"
 user - kind of a security problem since we have chosen to SUID a small
 script which will allow this to happen.

 This driver is based on the Squirrelmail Change SASL Password Plugin.
 See http://www.squirrelmail.org/plugin_view.php?id=107 for details.

 Installation:

 Change into the helpers directory. Edit the chgsaslpasswd.c file as is
 documented within it.

 Compile the wrapper program:
    gcc -o chgsaslpasswd chgsaslpasswd.c

 Chown the compiled chgsaslpasswd binary to the cyrus user and group
 that your browser runs as, then chmod them to 4550.

 For example, if your cyrus user is 'cyrus' and the apache server group is
 'nobody' (I've been told Red Hat runs Apache as user 'apache'):

    chown cyrus:nobody chgsaslpasswd
    chmod 4550 chgsaslpasswd

 Stephen Carr has suggested users should try to run the scripts on a test
 account as the cyrus user eg;

    su cyrus -c "./chgsaslpasswd -p test_account"

 This will allow you to make sure that the script will work for your setup.
 Should the script not work, make sure that:
 1) the user the script runs as has access to the saslpasswd|saslpasswd2
   file and proper permissions
 2) make sure the user in the chgsaslpasswd.c file is set correctly.
   This could save you some headaches if you are the paranoid type.


 2.1.3. Poppassd/Courierpassd (poppassd)
 ---------------------------------------

 You can specify which host to connect to via 'password_pop_host' and
 what port via 'password_pop_port'. See config.inc.php.dist file for more info.


 2.1.4. LDAP (ldap)
 ------------------

 See config.inc.php.dist file. Requires PEAR::Net_LDAP2 package.


 2.1.5. DirectAdmin Control Panel (directadmin)
 ----------------------------------------------

 You can specify which host to connect to via 'password_directadmin_host' (don't
 forget to use tcp:// or ssl://) and what port via 'password_directadmin_port'.
 The password enforcement with plenty customization can be done directly by
 DirectAdmin, please see http://www.directadmin.com/features.php?id=910
 See config.inc.php.dist file for more info.


 2.1.6. cPanel
 -------------

 Specify the host to connect to via 'password_cpanel_host'. This driver
 comes with a minimal UAPI implementation and does not use the external xmlapi
 class.

 See config.inc.php.dist file for more info.


 2.1.7. XIMSS/Communigate (ximms)
 --------------------------------

 You can specify which host and port to connect to via 'password_ximss_host'
 and 'password_ximss_port'. See config.inc.php.dist file for more info.


 2.1.9. hMailServer (hmail)
 --------------------------

 Requires PHP COM (Windows only). For access to hMail server on remote host
 you'll need to define 'hmailserver_remote_dcom' and 'hmailserver_server'.
 See config.inc.php.dist file for more info.


 2.1.10. PAM (pam)
 -----------------

 This driver is for changing passwords of shell users authenticated with PAM.
 Requires PECL's PAM extension to be installed (http://pecl.php.net/package/PAM).


 2.1.11. Chpasswd (chpasswd)
 ---------------------------

 Driver that adds functionality to change the systems user password via
 the 'chpasswd' command. See config.inc.php.dist file.

 Attached wrapper script (helpers/chpass-wrapper.py) restricts password changes
 to uids >= 1000 and can deny requests based on a blacklist.


 2.1.12.  LDAP - no PEAR (ldap_simple)
 -------------------------------------

 It's rewritten ldap driver that doesn't require the Net_LDAP2 PEAR extension.
 It uses directly PHP's ldap module functions instead (as Roundcube does).

 This driver is fully compatible with the ldap driver, but
 does not require (or uses) the
    $config['password_ldap_force_replace'] variable.
 Other advantages:
    * Connects only once with the LDAP server when using the search user.
    * Does not read the DN, but only replaces the password within (that is
      why the 'force replace' is always used).


 2.1.13.  XMail (xmail)
 ----------------------

 Driver for XMail (www.xmailserver.org). See config.inc.php.dist file
 for configuration description.


 2.1.14.  Pw (pw_usermod)
 ------------------------

 Driver to change the systems user password via the 'pw usermod' command.
 See config.inc.php.dist file for configuration description.


 2.1.15.  domainFACTORY (domainfactory)
 -------------------------------------

 Driver for the hosting provider domainFACTORY (www.df.eu).
 No configuration options.


 2.1.16.  DBMail (dbmail)
 ------------------------

 Driver that adds functionality to change the users DBMail password.
 It only works with dbmail-users on the same host where Roundcube runs
 and requires shell access and gcc in order to compile the binary
 (see instructions in chgdbmailusers.c file).
 See config.inc.php.dist file for configuration description.

 Note: DBMail users can also use sql driver.


 2.1.17.  Expect (expect)
 ------------------------

 Driver to change user password via the 'expect' command.
 See config.inc.php.dist file for configuration description.


 2.1.18.  Samba (smb)
 --------------------

 Driver to change Samba user password via the 'smbpasswd' command.
 See config.inc.php.dist file for configuration description.


 2.1.19. Vpopmail daemon (vpopmaild)
 -------------------------------------

 Driver for the daemon of vpopmail. Vpopmail is used with qmail to
 enable virtual users that are saved in a database and not in /etc/passwd.

 Set $config['password_vpopmaild_host'] to the host where vpopmaild runs.

 Set $config['password_vpopmaild_port'] to the port of vpopmaild.

 Set $config['password_vpopmaild_timeout'] to the timeout used for the TCP
 connection to vpopmaild (You may want to set it higher on busy servers).


 2.1.20. Plesk (Plesk RPC-API)
 -----------------------------

 Driver for changing Passwords via Plesk RPC-API. This Driver also works with
 Parallels Plesk Automation (PPA).

 You need to allow the IP of the Roundcube-Server for RPC-Calls in the Panel.

 Set $config['password_plesk_host'] to the Hostname / IP where Plesk runs
 Set your Admin or RPC User: $config['password_plesk_user']
 Set the Password of the User: $config['password_plesk_pass']
 Set $config['password_plesk_rpc_port']  for the RPC-Port. Usually its 8443
 Set the RPC-Path in $config['password_plesk_rpc_path']. Normally this is: enterprise/control/agent.php.


 2.1.21. Kpasswd
 ---------------

 Driver to change the password in Kerberos environments via the 'kpasswd' command.
 See config.inc.php.dist file for configuration description.


 2.1.22. Modoboa
 ---------------

 Driver to change the password in Modoboa servers.
 See config.inc.php.dist file for configuration description.


 2.1.23. LDAP - Password Modify Extended Operation (ldap_exop)
 -------------------------------------------------------------

 Modified version of ldap_simple.
 Password is changed using ldap_exop_passwd operation.


 2.1.24 TinyCP
 -------------

 Download the TinyCPConnector.php file from your TinyCP Settings page and
 save it into the password/drivers folder. Update/resolve file permissions for
 www-data/apache.
 Set the password_tinycp_host, password_tinycp_port, password_tinycp_user, and
 password_tinycp_pass in plugin's config.inc.php file.


 2.1.25 Mail-in-a-Box (miab)
 ---------------------------
 Driver to change the password on Mail-in-a-Box servers.
 See config.inc.php.dist file for configuration description.


 2.1.26. HTTP-API (httpapi)
 --------------------------

 Driver to change the user's password via any HTTP/HTTPS POST/GET API in a
 generic manner. It passes any of the username, curpass and newpass variables
 to the configured POST or GET parameters at the configured URL.

 Any 4xx error code (except 404) is assumed to mean the password change failed.
 404 or any other non-2xx error code, or failure to connect, is assumed to be a
 connection error and is reported as such.

 A 2xx response is generally assumed to mean the password changed succeeded.
 Optionally, you can configure a regular expression to check the response as
 well to verify this.


 2.1.27. dovecot_passwdfile
 --------------------------

 Driver that adds functionality to change the passwords in dovecot 2 passwd-file files
 regarding https://doc.dovecot.org/configuration_manual/authentication/passwd_file.

 Set 'password_dovecot_passwdfile_path' to your dovecot passwd-file location and
 'password_algorithm' (and related options) to the algorithm you want the passwords
 stored in the file to be using.


 2.1.28 Mailcow
 ---------------------------

 Driver to change the password on Mailcow servers.
 See config.inc.php.dist file for configuration description.


 2.1.29. LDAP Samba Active Directory (ldap_samba_ad)
 ---------------------------------------------------

 Password change via LDAP unicodePwd attribute supported by Active Directory.
 Uses configuration for other LDAP drivers.


 2.1.30. Stalwart
 ---------------------------------------------------

 First generate Stalwart API token.
 Permissions required for the Stalwart API key:
  - Retrieve specific account information => On
  - Modify user account information       => On

 Then setup these Roundcube config key:

 $config['password_stalwart_api_host']  = 'https://mail.example.org/api'; // required
 $config['password_stalwart_api_token'] = 'deadbeef';                     // required


 2.2. Password Strength Drivers
 ------------------------------

 Password plugin supports many password strength checking mechanisms which are
 handled by included drivers. Just pass driver name in 'password_strength_driver' option.


 2.2.1. Zxcvbn
 -------------

 Driver to use the Zxcvbn library to check password strength. Requires zxcvbn-php library.
 The library is not distributed with Roundcube (see composer.json).
 Note: Required PHP's memory_limit >= 24M.


 2.2.2. Have I been pwned? (pwned)
 ---------------------------------

 Driver using "Have I been pwned?" (https://haveibeenpwned.com/Passwords) API to
 check that entered passwords aren't already compromised (i.e., commonly known).
 The check is performed locally, the actual password is *not* transmitted anywhere.

 Example configuration:

 $config['password_strength_driver'] = 'pwned';
 $config['password_minimum_score'] = 3;

 Maximum supported score for this driver is 3. See the driver implementation file for more documentation.


 3. Driver API
 -------------

 Driver file (<driver_name>.php) must define rcube_<driver_name>_password class. Drivers should
 provide one or both of a public save() or check_strength() method.

 All password changing drivers (used in config `password_driver` - the password driver) must have
 a save() method. The same driver can also contain a check_strength() method or a separate driver
 containing this method can be used in `password_strength_driver` (the strength driver). To enable
 strength checks ensure `password_check_strength` is set to true.

 The save() method, used for changing the password has three arguments:
 First - current password, second - new password, third - current username.
 This method should return PASSWORD_SUCCESS on success or any of PASSWORD_CONNECT_ERROR,
 PASSWORD_CRYPT_ERROR, PASSWORD_ERROR when driver was unable to change password.
 Extended result (as a hash-array with 'message' and 'code' items) can be returned
 too. See existing drivers in drivers/ directory for examples.

 Optionally a password driver can contain a compare() method which has three arguments:
 First - current password, second - test password, third - compare type.
 Compare type: PASSWORD_COMPARE_CURRENT - when comparing the test password with current password.
 PASSWORD_COMPARE_NEW - when comparing the current password with the test password.
 For PASSWORD_COMPARE_CURRENT it should return error text if user entered and real current password
 DO NOT MATCH. For PASSWORD_COMPARE_NEW it should return error text if user entered and real current
 password DO MATCH. Else it should return null (no error).

 The check_strength() method, used for checking password strength has one argument: new password.
 This method should return an array with tho elements:
   - Score: integer from 1 (week) to 5 (strong)
   - Reason for the score (optional)

 Optionally a strength driver can contain a strength_rules() method. This has no arguments
 and returns a string, or array of strings explaining the password strength rules.


 4. Sudo setup
 -------------

 Some drivers that execute system commands (like chpasswd) require use of sudo command.
 Here's a sample for CentOS 7:

 # cat <<END >/etc/sudoers.d/99-roundcubemail
 apache ALL=NOPASSWD:/usr/sbin/chpasswd
 Defaults:apache !requiretty
 <<END

 Note: on different systems the username (here 'apache') may be different, e.g. www.
 Note: on some systems the disabling tty line may not be needed.
