# Chinese Simplified translation about texinfo.
# Copyright (C) 2002 Free Software Foundation, Inc.
# This file is distributed under the same license as the texinfo package.
# Wang Li <charles@linux.net.cn>, 2002.
# Ji ZhengYu <zhengyuji@gmail.com>, 2008
msgid ""
msgstr ""
"Project-Id-Version: texinfo 4.12.94\n"
"Report-Msgid-Bugs-To: bug-texinfo@gnu.org\n"
"POT-Creation-Date: 2008-09-18 20:38+0200\n"
"PO-Revision-Date: 2008-08-17 12:56中国标准时间\n"
"Last-Translator: Ji ZhengYu <zhengyuji@gmail.com>\n"
"Language-Team: Chinese (simplified) <translation-team-zh-cn@lists."
"sourceforge.net>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: gnulib/lib/error.c:125
msgid "Unknown system error"
msgstr "未知的系统错误"

#: gnulib/lib/getopt.c:526 gnulib/lib/getopt.c:542
#, c-format
msgid "%s: option `%s' is ambiguous\n"
msgstr "%s：选项“%s”含义不明确\n"

#: gnulib/lib/getopt.c:575 gnulib/lib/getopt.c:579
#, c-format
msgid "%s: option `--%s' doesn't allow an argument\n"
msgstr "%s：选项“--%s”不接受参数\n"

#: gnulib/lib/getopt.c:588 gnulib/lib/getopt.c:593
#, c-format
msgid "%s: option `%c%s' doesn't allow an argument\n"
msgstr "%s：选项“%c%s”不接受参数\n"

#: gnulib/lib/getopt.c:636 gnulib/lib/getopt.c:655 gnulib/lib/getopt.c:971
#: gnulib/lib/getopt.c:990
#, c-format
msgid "%s: option `%s' requires an argument\n"
msgstr "%s：选项“%s”需要一个参数\n"

#: gnulib/lib/getopt.c:693 gnulib/lib/getopt.c:696
#, c-format
msgid "%s: unrecognized option `--%s'\n"
msgstr "%s：不能识别的选项“--%s”\n"

#: gnulib/lib/getopt.c:704 gnulib/lib/getopt.c:707
#, c-format
msgid "%s: unrecognized option `%c%s'\n"
msgstr "%s：不能识别的选项“%c%s”\n"

#: gnulib/lib/getopt.c:759 gnulib/lib/getopt.c:762
#, c-format
msgid "%s: illegal option -- %c\n"
msgstr "%s：非法选项 -- %c\n"

#: gnulib/lib/getopt.c:768 gnulib/lib/getopt.c:771
#, c-format
msgid "%s: invalid option -- %c\n"
msgstr "%s：无效选项 -- %c\n"

#: gnulib/lib/getopt.c:823 gnulib/lib/getopt.c:839 gnulib/lib/getopt.c:1043
#: gnulib/lib/getopt.c:1061
#, c-format
msgid "%s: option requires an argument -- %c\n"
msgstr "%s：选项需要一个参数 -- %c\n"

#: gnulib/lib/getopt.c:892 gnulib/lib/getopt.c:908
#, c-format
msgid "%s: option `-W %s' is ambiguous\n"
msgstr "%s：选项“-W %s”的含义不清\n"

#: gnulib/lib/getopt.c:932 gnulib/lib/getopt.c:950
#, c-format
msgid "%s: option `-W %s' doesn't allow an argument\n"
msgstr "%s：选项“-W %s”不接受参数\n"

#: gnulib/lib/xalloc-die.c:34 gnulib/lib/xsetenv.c:37
#, c-format
msgid "memory exhausted"
msgstr "虚拟内存耗尽"

#: info/echo-area.c:283 info/session.c:966
msgid "Move forward a character"
msgstr "向前移动一个字符"

#: info/echo-area.c:295 info/session.c:993
msgid "Move backward a character"
msgstr "向后移动一个字符"

#: info/echo-area.c:307
msgid "Move to the start of this line"
msgstr "移动到本行的开头"

#: info/echo-area.c:312
msgid "Move to the end of this line"
msgstr "移动到本行的末尾"

#: info/echo-area.c:320 info/session.c:1025
msgid "Move forward a word"
msgstr "向前移动一个单词"

#: info/echo-area.c:360 info/session.c:1049
msgid "Move backward a word"
msgstr "向后移动一个单词"

#: info/echo-area.c:400
msgid "Delete the character under the cursor"
msgstr "删除光标位置的字符"

#: info/echo-area.c:430
msgid "Delete the character behind the cursor"
msgstr "删除光标之后的字符"

#: info/echo-area.c:451
msgid "Cancel or quit operation"
msgstr "取消或退出操作"

#: info/echo-area.c:466
msgid "Accept (or force completion of) this line"
msgstr "接受(或强制完成)本行"

#: info/echo-area.c:471
msgid "Insert next character verbatim"
msgstr "原样插入下一个字符"

#: info/echo-area.c:479
msgid "Insert this character"
msgstr "插入该字符"

#: info/echo-area.c:498
msgid "Insert a TAB character"
msgstr "插入一个 tab 字符"

#: info/echo-area.c:505
msgid "Transpose characters at point"
msgstr "变换光标处字符的次序"

#: info/echo-area.c:556
msgid "Yank back the contents of the last kill"
msgstr "粘贴最后一次剪切的内容"

#: info/echo-area.c:563
msgid "Kill ring is empty"
msgstr "剪贴簿为空"

#: info/echo-area.c:576
msgid "Yank back a previous kill"
msgstr "粘贴上次剪切"

#: info/echo-area.c:609
msgid "Kill to the end of the line"
msgstr "剪切至本行末尾"

#: info/echo-area.c:622
msgid "Kill to the beginning of the line"
msgstr "剪切至本行开头"

#: info/echo-area.c:634
msgid "Kill the word following the cursor"
msgstr "剪切光标之后的单词"

#: info/echo-area.c:654
msgid "Kill the word preceding the cursor"
msgstr "剪切光标之前的单词"

#: info/echo-area.c:870 info/echo-area.c:926
msgid "No completions"
msgstr "没有补齐"

#: info/echo-area.c:872
msgid "Not complete"
msgstr "未补齐"

#: info/echo-area.c:913
msgid "List possible completions"
msgstr "列举可能的补齐"

#: info/echo-area.c:930
msgid "Sole completion"
msgstr "唯一的补齐"

#: info/echo-area.c:939
msgid "One completion:\n"
msgstr "一个补齐：\n"

#: info/echo-area.c:940
#, c-format
msgid "%d completions:\n"
msgstr "%d 个补齐：\n"

#: info/echo-area.c:1087
msgid "Insert completion"
msgstr "插入补齐"

#: info/echo-area.c:1222
msgid "Building completions..."
msgstr "正在创建补齐..."

#: info/echo-area.c:1342
msgid "Scroll the completions window"
msgstr "滚动补齐窗口"

#: info/footnotes.c:212
msgid "Footnotes could not be displayed"
msgstr "无法显示脚注"

#: info/footnotes.c:238
msgid "Show the footnotes associated with this node in another window"
msgstr "在另一个窗口中显示于该节点相关的脚注"

#: info/footnotes.h:26
msgid "---------- Footnotes ----------"
msgstr "---------- 脚注 ----------"

#: info/indices.c:171
msgid "Look up a string in the index for this file"
msgstr "在本文件的索引中搜索字符串"

#: info/indices.c:198
msgid "Finding index entries..."
msgstr "正在搜索索引条目..."

#: info/indices.c:206
msgid "No indices found."
msgstr "未找到索引。"

#: info/indices.c:216
msgid "Index entry: "
msgstr "索引条目："

#: info/indices.c:324
msgid ""
"Go to the next matching index item from the last `\\[index-search]' command"
msgstr "从最后一个“\\[index-search]”命令转移到下一个匹配的索引项目"

#: info/indices.c:334
msgid "No previous index search string."
msgstr "没有上一个索引搜索字符串。"

#: info/indices.c:341
msgid "No index entries."
msgstr "没有索引条目。"

#: info/indices.c:374
#, c-format
msgid "No %sindex entries containing `%s'."
msgstr "没有 %s索引条目含有“%s”。"

#: info/indices.c:375
msgid "more "
msgstr "更多 "

#: info/indices.c:385
msgid "CAN'T SEE THIS"
msgstr "看不到这个"

#: info/indices.c:421
#, c-format
msgid "Found `%s' in %s. (`\\[next-index-match]' tries to find next.)"
msgstr "在 %2$s 中找到“%1$s”。(“\\[next-index-match]”将试图寻找下一个匹配。)"

#: info/indices.c:549
#, c-format
msgid "Scanning indices of `%s'..."
msgstr "正在搜索“%s”的索引..."

#: info/indices.c:604
#, c-format
msgid "No available info files have `%s' in their indices."
msgstr "在可用的 info 文件的索引中均不含有“%s”。"

#: info/indices.c:630
msgid "Grovel all known info file's indices for a string and build a menu"
msgstr "整理所有已知 info 文件含有被查询字符串的索引并建立一个菜单"

#: info/indices.c:634
msgid "Index apropos: "
msgstr "索引含有："

#: info/indices.c:662
#, c-format
msgid ""
"\n"
"* Menu: Nodes whose indices contain `%s':\n"
msgstr ""
"\n"
"* 菜单：其索引含有“%s”的节点：\n"

#: info/info.c:275 info/infokey.c:899
#, c-format
msgid "Try --help for more information.\n"
msgstr "尝试 --更多的求助信息。\n"

#: info/info.c:294 info/infokey.c:145 install-info/install-info.c:2101
#: makeinfo/makeinfo.c:802 util/texindex.c:295
#, c-format
msgid ""
"Copyright (C) %s Free Software Foundation, Inc.\n"
"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
"html>\n"
"This is free software: you are free to change and redistribute it.\n"
"There is NO WARRANTY, to the extent permitted by law.\n"
msgstr ""
"Copyright (C) %s Free Software Foundation, Inc.\n"
"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
"html>\n"
"This is free software: you are free to change and redistribute it.\n"
"There is NO WARRANTY, to the extent permitted by law.\n"

#: info/info.c:506
#, c-format
msgid "no index entries found for `%s'\n"
msgstr "找不到含有“%s”的索引\n"

#: info/info.c:600
#, c-format
msgid ""
"Usage: %s [OPTION]... [MENU-ITEM...]\n"
"\n"
"Read documentation in Info format.\n"
msgstr ""
"用法: %s [OPTION]... [MENU-ITEM...]\n"
"\n"
"以 Info 格式阅读文档。\n"

#: info/info.c:606
msgid ""
"Options:\n"
"  -k, --apropos=STRING         look up STRING in all indices of all "
"manuals.\n"
"  -d, --directory=DIR          add DIR to INFOPATH.\n"
"      --dribble=FILENAME       remember user keystrokes in FILENAME.\n"
"  -f, --file=FILENAME          specify Info file to visit."
msgstr ""
"选项:\n"
"  -k, --apropos=STRING         在所有手册页的索引中查找 STRING。\n"
"  -d, --directory=DIR          将 DIR 添加至 INFOPATH。\n"
"      --dribble=FILENAME       将用户的击键条目在 FILENAME 中。\n"
"  -f, --file=FILENAME          指定想浏览的 Info 文件。"

#: info/info.c:613
msgid ""
"  -h, --help                   display this help and exit.\n"
"      --index-search=STRING    go to node pointed by index entry STRING.\n"
"  -n, --node=NODENAME          specify nodes in first visited Info file.\n"
"  -o, --output=FILENAME        output selected nodes to FILENAME."
msgstr ""
"  -h, --help                   显示此帮助并退出。\n"
"      --index-search=STRING    跳转至索引条目 STRING 所指的节点。\n"
"  -n, --node=NODENAME          在首个浏览过的 Info 文件中指定节点。\n"
"  -o, --output=FILENAME        将选中的节点全输出至 FILENAME。"

#: info/info.c:619
msgid ""
"  -R, --raw-escapes            output \"raw\" ANSI escapes (default).\n"
"      --no-raw-escapes         output escapes as literal text.\n"
"      --restore=FILENAME       read initial keystrokes from FILENAME.\n"
"  -O, --show-options, --usage  go to command-line options node."
msgstr ""
"  -R, --raw-escapes            输出“原始”的 ANSI 转义符(默认)。\n"
"      --no-raw-escapes         将转义符输出为普通文本。\n"
"      --restore=FILENAME       从 FILENAME 中读取初始击键条目。\n"
"  -O, --show-options, --usage  跳转至命令行选项节点。"

#: info/info.c:626
#, fuzzy
msgid "  -b, --speech-friendly        be friendly to speech synthesizers."
msgstr "  -b, --speech-friendly        对发音器友好。"

#: info/info.c:630
msgid ""
"      --subnodes               recursively output menu items.\n"
"      --vi-keys                use vi-like and less-like key bindings.\n"
"      --version                display version information and exit.\n"
"  -w, --where, --location      print physical location of Info file."
msgstr ""
"      --subnodes               递归输出菜单项。\n"
"      --vi-keys                使用类似于 vi 和 less 的按键绑定。\n"
"      --version                显示版本信息并退出。\n"
"  -w, --where, --location      打印 Info 文件在系统中的位置。"

#: info/info.c:636
msgid ""
"\n"
"The first non-option argument, if present, is the menu entry to start from;\n"
"it is searched for in all `dir' files along INFOPATH.\n"
"If it is not present, info merges all `dir' files and shows the result.\n"
"Any remaining arguments are treated as the names of menu\n"
"items relative to the initial node visited."
msgstr ""
"\n"
"如果存在第一个非选项参数，它将是个用于起始的菜单条目；\n"
"所有在 INFOPATH 变量后跟着的“dir”文件都会搜索此条目。\n"
"如果不存在此参数，info 合并所有“dir”文件并显示结果。\n"
"任何后续参数都被认为是与初始浏览\n"
"节点有关的菜单项名称。"

#: info/info.c:643
msgid ""
"\n"
"For a summary of key bindings, type h within Info."
msgstr ""
"\n"
"在帮助信息中按 h 获取有关按键绑定的内容。"

#: info/info.c:646
msgid ""
"\n"
"Examples:\n"
"  info                       show top-level dir menu\n"
"  info info                  show the general manual for Info readers\n"
"  info info-stnd             show the manual specific to this Info program\n"
"  info emacs                 start at emacs node from top-level dir\n"
"  info emacs buffers         start at buffers node within emacs manual\n"
"  info --show-options emacs  start at node with emacs' command line options\n"
"  info --subnodes -o out.txt emacs  dump entire manual to out.txt\n"
"  info -f ./foo.info         show file ./foo.info, not searching dir"
msgstr ""
"\n"
"范例:\n"
"  info                       显示顶级目录菜单\n"
"  info info                  显示 Info readers 的普通手册\n"
"  info info-stnd             显示此 Info 程序特定手册\n"
"  info emacs                 从顶级目录浏览 emacs 节点\n"
"  info emacs buffers         在 emacs 手册页中浏览 buffers 节点\n"
"  info --show-options emacs  浏览与 emacs 的命令行选项有关的节点\n"
"  info --subnodes -o out.txt emacs  将整个手册页输出至 out.txt\n"
"  info -f ./foo.info         显示文件 ./foo.info，而不是查找目录"

#: info/info.c:657 info/infokey.c:918 makeinfo/makeinfo.c:475
#: util/texindex.c:259
msgid ""
"\n"
"Email bug reports to bug-texinfo@gnu.org,\n"
"general questions and discussion to help-texinfo@gnu.org.\n"
"Texinfo home page: http://www.gnu.org/software/texinfo/"
msgstr ""
"\n"
"请将错误报告发送到 bug-texinfo@gnu.org，\n"
"一般的问题和讨论请发送到 help-texinfo@gnu.org。\n"
"Texinfo 主页：http://www.gnu.org/software/texinfo/"

#: info/info.c:691
#, c-format
msgid "Cannot find node `%s'."
msgstr "无法找到节点“%s”。"

#: info/info.c:692
#, c-format
msgid "Cannot find node `(%s)%s'."
msgstr "无法找到节点“(%s)%s”。"

#: info/info.c:693
msgid "Cannot find a window!"
msgstr "无法找到一个窗口！"

#: info/info.c:694
msgid "Point doesn't appear within this window's node!"
msgstr "光标没有出现在该窗口的节点之中！"

#: info/info.c:695
msgid "Cannot delete the last window."
msgstr "无法删除最后的窗口。"

#: info/info.c:696
msgid "No menu in this node."
msgstr "该节点中没有菜单。"

#: info/info.c:697
msgid "No footnotes in this node."
msgstr "该节点中没有脚注。"

#: info/info.c:698
msgid "No cross references in this node."
msgstr "该节点中没有交叉引用。"

#: info/info.c:699
#, c-format
msgid "No `%s' pointer for this node."
msgstr "该节点中没有“%s”指针"

#: info/info.c:700
#, c-format
msgid "Unknown Info command `%c'; try `?' for help."
msgstr "未知的 Info 命令“%c”；请以“?”获得帮助。"

#: info/info.c:701
#, c-format
msgid "Terminal type `%s' is not smart enough to run Info."
msgstr "终端类型“%s”的能力不足以支持 Info 的运行。"

#: info/info.c:702
msgid "You are already at the last page of this node."
msgstr "您已经在该节点的最后一个页面中了。"

#: info/info.c:703
msgid "You are already at the first page of this node."
msgstr "您已经在该节点的第一页中了。"

#: info/info.c:704
msgid "Only one window."
msgstr "只有一个窗口。"

#: info/info.c:705
msgid "Resulting window would be too small."
msgstr "结果窗口将会太小。"

#: info/info.c:706
msgid "Not enough room for a help window, please delete a window."
msgstr "没有足够的空间用于求助窗口，请删除一个窗口。"

#: info/infodoc.c:45
msgid "Basic Info command keys\n"
msgstr "基本 Info 命令按键\n"

#: info/infodoc.c:47
msgid "\\%-10[quit-help]  Close this help window.\n"
msgstr "\\%-10[quit-help]  关闭此帮助窗口。\n"

#: info/infodoc.c:48
msgid "\\%-10[quit]  Quit Info altogether.\n"
msgstr "\\%-10[quit]  一并退出 Info。\n"

#: info/infodoc.c:49
msgid "\\%-10[get-info-help-node]  Invoke the Info tutorial.\n"
msgstr "\\%-10[get-info-help-node]  调用 Info 教程。\n"

#: info/infodoc.c:51
msgid "\\%-10[prev-line]  Move up one line.\n"
msgstr "\\%-10[prev-line]  向上移动一行。\n"

#: info/infodoc.c:52
msgid "\\%-10[next-line]  Move down one line.\n"
msgstr "\\%-10[next-line]  向下移动一行。\n"

#: info/infodoc.c:53
msgid "\\%-10[scroll-backward]  Scroll backward one screenful.\n"
msgstr "\\%-10[scroll-backward]  向后滚动一页。\n"

#: info/infodoc.c:54
msgid "\\%-10[scroll-forward]  Scroll forward one screenful.\n"
msgstr "\\%-10[scroll-forward]  向前滚动一页。\n"

#: info/infodoc.c:55
msgid "\\%-10[beginning-of-node]  Go to the beginning of this node.\n"
msgstr "\\%-10[beginning-of-node]  移动到本节点的开头。\n"

#: info/infodoc.c:56
msgid "\\%-10[end-of-node]  Go to the end of this node.\n"
msgstr "\\%-10[end-of-node]  移动到本节点的末尾。\n"

#: info/infodoc.c:58
msgid "\\%-10[move-to-next-xref]  Skip to the next hypertext link.\n"
msgstr "\\%-10[move-to-next-xref]  跳转到下一个超文本连接。\n"

#: info/infodoc.c:59
msgid ""
"\\%-10[select-reference-this-line]  Follow the hypertext link under the "
"cursor.\n"
msgstr "\\%-10[select-reference-this-line]  跟随光标下的超文本连接。\n"

#: info/infodoc.c:60
msgid "\\%-10[history-node]  Go back to the last node seen in this window.\n"
msgstr "\\%-10[history-node]  移动到本窗口的最后阅读过的节点。\n"

#: info/infodoc.c:62
msgid "\\%-10[global-prev-node]  Go to the previous node in the document.\n"
msgstr "\\%-10[global-prev-node]  移动到本文档的上一个节点。\n"

#: info/infodoc.c:63
msgid "\\%-10[global-next-node]  Go to the next node in the document.\n"
msgstr "\\%-10[global-next-node]  移动到本文档的下一个节点。\n"

#: info/infodoc.c:64
msgid "\\%-10[prev-node]  Go to the previous node on this level.\n"
msgstr "\\%-10[prev-node]  移动到同级的上一个节点。\n"

#: info/infodoc.c:65
msgid "\\%-10[next-node]  Go to the next node on this level.\n"
msgstr "\\%-10[next-node]  移动到同级的下一个节点。\n"

#: info/infodoc.c:66
msgid "\\%-10[up-node]  Go up one level.\n"
msgstr "\\%-10[up-node]  上移一层。\n"

#: info/infodoc.c:67
msgid "\\%-10[top-node]  Go to the top node of this document.\n"
msgstr "\\%-10[top-node]  移到此文档的顶层节点。\n"

#: info/infodoc.c:68
msgid "\\%-10[dir-node]  Go to the main `directory' node.\n"
msgstr "\\%-10[dir-node]  移动到主“目录”节点。\n"

#: info/infodoc.c:70
msgid "1...9       Pick the first...ninth item in this node's menu.\n"
msgstr "1...9\t\t选取节点菜单中的第一至第九个项目。\n"

#: info/infodoc.c:71
msgid "\\%-10[last-menu-item]  Pick the last item in this node's menu.\n"
msgstr "\\%-10[last-menu-item]  选取节点菜单的最后一个项目。\n"

#: info/infodoc.c:72
msgid "\\%-10[menu-item]  Pick a menu item specified by name.\n"
msgstr "\\%-10[menu-item]  选取由名称指定的菜单项目。\n"

#: info/infodoc.c:73
#, fuzzy
msgid "\\%-10[xref-item]  Follow a cross reference specified by name.\n"
msgstr "\\%-10[xref-item]  跟随由名称指定的交叉引用。\n"

#: info/infodoc.c:74
msgid "\\%-10[goto-node]  Go to a node specified by name.\n"
msgstr "\\%-10[goto-node]  移动到由名字指定的节点。\n"

#: info/infodoc.c:76
msgid "\\%-10[search]  Search forward for a specified string.\n"
msgstr "\\%-10[search]  向前搜索指定的字符串。\n"

#: info/infodoc.c:77
msgid "\\%-10[search-previous]  Search for previous occurrence.\n"
msgstr "\\%-10[search-previous]  查找上一个出现点。\n"

#: info/infodoc.c:78
msgid "\\%-10[search-next]  Search for next occurrence.\n"
msgstr "\\%-10[search-next]  查找下一个出现点。\n"

#: info/infodoc.c:79
msgid ""
"\\%-10[index-search]  Search for a specified string in the index, and\n"
"              select the node referenced by the first entry found.\n"
msgstr ""
"\\%-10[index-search]  在索引条目中搜索指定的字符串，\n"
"              并选择第一个找到的条目所引用的节点。\n"

#: info/infodoc.c:81
msgid "\\%-10[abort-key]  Cancel the current operation.\n"
msgstr "\\%-10[abort-key]  取消当前操作。\n"

#: info/infodoc.c:89
msgid ""
"Basic Commands in Info Windows\n"
"******************************\n"
msgstr ""
"Info 窗口中的基本命令\n"
"******************************\n"

#: info/infodoc.c:92
#, c-format
msgid "  %-10s  Quit this help.\n"
msgstr "  %-10s  退出本求助。\n"

#: info/infodoc.c:93
#, c-format
msgid "  %-10s  Quit Info altogether.\n"
msgstr "  %-10s  一并退出 Info。\n"

#: info/infodoc.c:94
#, c-format
msgid "  %-10s  Invoke the Info tutorial.\n"
msgstr "  %-10s  调用 Info 教程。\n"

#: info/infodoc.c:98
#, c-format
msgid "  %-10s  Move to the `next' node of this node.\n"
msgstr "  %-10s  移动到本节点的“下一个”节点。\n"

#: info/infodoc.c:99
#, c-format
msgid "  %-10s  Move to the `previous' node of this node.\n"
msgstr "  %-10s  移动到本节点的“上一个”节点。\n"

#: info/infodoc.c:100
#, c-format
msgid "  %-10s  Move `up' from this node.\n"
msgstr "  %-10s  移动到本节点的“上层”节点。\n"

#: info/infodoc.c:101
#, c-format
msgid ""
"  %-10s  Pick menu item specified by name.\n"
"              Picking a menu item causes another node to be selected.\n"
msgstr ""
"  %-10s  选取由名称指定的菜单项目。\n"
"              选取一个菜单项目导致选中另一个节点。\n"

#: info/infodoc.c:103
#, c-format
msgid "  %-10s  Follow a cross reference.  Reads name of reference.\n"
msgstr "  %-10s  跟随交叉引用。读取引用的名称。\n"

#: info/infodoc.c:104
#, c-format
msgid "  %-10s  Move to the last node seen in this window.\n"
msgstr "  %-10s  移动到本窗口中的最后一个可见的节点。\n"

#: info/infodoc.c:105
#, c-format
msgid "  %-10s  Skip to next hypertext link within this node.\n"
msgstr "  %-10s  跳转到本节点中的下一个超文本连接。\n"

#: info/infodoc.c:106
#, c-format
msgid "  %-10s  Follow the hypertext link under cursor.\n"
msgstr "  %-10s  跟随光标位置的超文本连接。\n"

#: info/infodoc.c:107
#, c-format
msgid "  %-10s  Move to the `directory' node.  Equivalent to `g (DIR)'.\n"
msgstr "  %-10s  移动到“directory”节点。等价于“g (DIR)”。\n"

#: info/infodoc.c:108
#, c-format
msgid "  %-10s  Move to the Top node.  Equivalent to `g Top'.\n"
msgstr "  %-10s  移动到顶层节点。等价于“g Top”。\n"

#: info/infodoc.c:110
msgid ""
"Moving within a node:\n"
"---------------------\n"
msgstr ""
"在一个节点中移动：\n"
"---------------------\n"

#: info/infodoc.c:112
#, c-format
msgid "  %-10s  Scroll forward a page.\n"
msgstr "  %-10s  向前滚动一页。\n"

#: info/infodoc.c:113
#, c-format
msgid "  %-10s  Scroll backward a page.\n"
msgstr "  %-10s  向后滚动一页。\n"

#: info/infodoc.c:114
#, c-format
msgid "  %-10s  Go to the beginning of this node.\n"
msgstr "  %-10s  转移到本节点的开头。\n"

#: info/infodoc.c:115
#, c-format
msgid "  %-10s  Go to the end of this node.\n"
msgstr "  %-10s  转移到本节点的末尾。\n"

#: info/infodoc.c:116
#, c-format
msgid "  %-10s  Scroll forward 1 line.\n"
msgstr "  %-10s  向前滚动一行。\n"

#: info/infodoc.c:117
#, c-format
msgid "  %-10s  Scroll backward 1 line.\n"
msgstr "  %-10s  向后滚动一行。\n"

#: info/infodoc.c:119
msgid ""
"Other commands:\n"
"---------------\n"
msgstr ""
"其它命令：\n"
"---------------\n"

#: info/infodoc.c:121
#, c-format
msgid "  %-10s  Pick first...ninth item in node's menu.\n"
msgstr "  %-10s  选取节点菜单中的第一至第九个项目。\n"

#: info/infodoc.c:122
#, c-format
msgid "  %-10s  Pick last item in node's menu.\n"
msgstr "  %-10s  选取节点菜单中的最后一个项目。\n"

#: info/infodoc.c:125
#, c-format
msgid ""
"  %-10s  Search for a specified string in the index entries of this Info\n"
"              file, and select the node referenced by the first entry "
"found.\n"
msgstr ""
"  %-10s  在本 Info 文件的索引条目中搜索指定的字符串，\n"
"              并选择第一个找到的条目所引用的节点。\n"

#: info/infodoc.c:127
#, c-format
msgid ""
"  %-10s  Move to node specified by name.\n"
"              You may include a filename as well, as in (FILENAME)NODENAME.\n"
msgstr ""
"  %-10s   移动到由名字指定的节点。\n"
"              您也可在 (FILENAME)NODENAME 中包含文件名。\n"

#: info/infodoc.c:129
#, c-format
msgid ""
"  %-10s  Search forward for a specified string,\n"
"              and select the node in which the next occurrence is found.\n"
msgstr ""
"  %-10s    向前搜索指定的字符串，\n"
"              并选择所找到的下一个实例所在的节点。\n"

#: info/infodoc.c:131
#, c-format
msgid ""
"  %-10s  Search backward for a specified string,\n"
"              and select the node in which the next occurrence is found.\n"
msgstr ""
"  %-10s    向后搜索指定的字符串，\n"
"              并选择所找到的下一个实例所在的节点。\n"

#: info/infodoc.c:312
msgid "The current search path is:\n"
msgstr "当前搜索路径为：\n"

#: info/infodoc.c:316
msgid ""
"Commands available in Info windows:\n"
"\n"
msgstr ""
"Info 窗口中可用的命令：\n"
"\n"

#: info/infodoc.c:320
msgid ""
"Commands available in the echo area:\n"
"\n"
msgstr ""
"回显区中可用的命令：\n"
"\n"

#: info/infodoc.c:343
#, c-format
msgid ""
"The following commands can only be invoked via %s:\n"
"\n"
msgstr ""
"以下命令只能通过 %s 调用：\n"
"\n"

#: info/infodoc.c:347
msgid ""
"The following commands cannot be invoked at all:\n"
"\n"
msgstr ""
"以下命令根本无法调用：\n"
"\n"

#: info/infodoc.c:477
msgid "Display help message"
msgstr "显示求助消息"

#: info/infodoc.c:495
msgid "Visit Info node `(info)Help'"
msgstr "访问 Info 节点“(info)Help”"

#: info/infodoc.c:633
msgid "Print documentation for KEY"
msgstr "打印关于 KEY 的文档"

#: info/infodoc.c:645
#, c-format
msgid "Describe key: %s"
msgstr "说明按键：%s"

#: info/infodoc.c:656
#, c-format
msgid "ESC %s is undefined."
msgstr "ESC %s 未定义。"

#: info/infodoc.c:672 info/infodoc.c:701
#, c-format
msgid "%s is undefined."
msgstr "%s 未定义。"

#: info/infodoc.c:722
#, c-format
msgid "%s is defined to %s."
msgstr "%s 被定义为 %s。"

#: info/infodoc.c:1146
msgid "Show what to type to execute a given command"
msgstr "显示执行给定命令所需的按键"

#: info/infodoc.c:1150
msgid "Where is command: "
msgstr "命令为:"

#: info/infodoc.c:1172
#, c-format
msgid "`%s' is not on any keys"
msgstr "“%s”未绑定到任何按键"

#: info/infodoc.c:1179
#, c-format
msgid "%s can only be invoked via %s."
msgstr "%s 不能通过 %s 调用。"

#: info/infodoc.c:1183
#, c-format
msgid "%s can be invoked via %s."
msgstr "%s 可以通过 %s 调用。"

#: info/infodoc.c:1188
#, c-format
msgid "There is no function named `%s'"
msgstr "没有名为“%s”的函数"

#: info/infodoc.c:96
msgid ""
"Selecting other nodes:\n"
"----------------------\n"
msgstr ""
"选择其它节点：\n"
"----------------------\n"

#: info/infokey.c:170
msgid "incorrect number of arguments"
msgstr "错误的参数数"

#: info/infokey.c:201
#, c-format
msgid "cannot open input file `%s'"
msgstr "无法打开输入文件“%s”"

#: info/infokey.c:215
#, c-format
msgid "cannot create output file `%s'"
msgstr "无法创建输出文件“%s”"

#: info/infokey.c:226
#, c-format
msgid "error writing to `%s'"
msgstr "写入“%s”时出错"

#: info/infokey.c:232
#, c-format
msgid "error closing output file `%s'"
msgstr "关闭输出文件“%s”时出错"

#: info/infokey.c:450
msgid "key sequence too long"
msgstr "按键序列过长"

#: info/infokey.c:529
msgid "missing key sequence"
msgstr "遗漏按键序列"

#: info/infokey.c:610
msgid "NUL character (\\000) not permitted"
msgstr "不允许的空字符 (\\\\000)"

#: info/infokey.c:641
#, c-format
msgid "NUL character (^%c) not permitted"
msgstr "不允许的空字符 (^%c)"

#: info/infokey.c:665
msgid "missing action name"
msgstr "遗漏动作名称"

#: info/infokey.c:681 info/infokey.c:756
msgid "section too long"
msgstr "节太长"

#: info/infokey.c:688
#, c-format
msgid "unknown action `%s'"
msgstr "未知的动作“%s”"

#: info/infokey.c:698
msgid "action name too long"
msgstr "动作名过长"

#: info/infokey.c:712
#, c-format
msgid "extra characters following action `%s'"
msgstr "动作“%s”之后出现额外的字符"

#: info/infokey.c:723
msgid "missing variable name"
msgstr "遗漏变量名"

#: info/infokey.c:733
msgid "missing `=' immediately after variable name"
msgstr "变量名之后遗漏了“=”"

#: info/infokey.c:741
msgid "variable name too long"
msgstr "变量名过长"

#: info/infokey.c:765
msgid "value too long"
msgstr "值过长"

#: info/infokey.c:890
#, c-format
msgid "\"%s\", line %u: "
msgstr "“%s”，行 %u："

#: info/infokey.c:906
#, c-format
msgid ""
"Usage: %s [OPTION]... [INPUT-FILE]\n"
"\n"
"Compile infokey source file to infokey file.  Reads INPUT-FILE (default\n"
"$HOME/.infokey) and writes compiled key file to (by default) $HOME/.info.\n"
"\n"
"Options:\n"
"  --output FILE        output to FILE instead of $HOME/.info\n"
"  --help               display this help and exit.\n"
"  --version            display version information and exit.\n"
msgstr ""
"用法：%s [选项]... [输入文件]\n"
"\n"
"将 infokey 源文件编译为 infokey 文件。读取输入文件(默认为\n"
"$HOME/.infokey) 并将编译完成的键文件写入到 (默认为) $HOME/.info。\n"
"\n"
"选项：\n"
"  --output FILE        输出到文件 FILE 而不是 $HOME/.info 中。\n"
"  --help               显示该求助信息并退出。\n"
"  --version            显示版本信息并退出。\n"

#: info/infomap.c:955
#, c-format
msgid "Ignoring invalid infokey file `%s' - too small"
msgstr "忽略非法的 infokey 文件“%s” - 太小"

#: info/infomap.c:958
#, c-format
msgid "Ignoring invalid infokey file `%s' - too big"
msgstr "忽略非法的 infokey 文件“%s” - 太大"

#: info/infomap.c:971
#, c-format
msgid "Error reading infokey file `%s' - short read"
msgstr "读入 infokey 文件“%s”时出错 - 读入中断"

#: info/infomap.c:990
#, c-format
msgid ""
"Invalid infokey file `%s' (bad magic numbers) -- run infokey to update it"
msgstr "非法的 infokey 文件“%s” (错误的 magic 编号) -- 运行 infokey 以便更新"

#: info/infomap.c:999
#, c-format
msgid "Your infokey file `%s' is out of date -- run infokey to update it"
msgstr "您的 infokey 文件“%s” 过时了 -- 运行 infokey 以便更新"

#: info/infomap.c:1015
#, c-format
msgid ""
"Invalid infokey file `%s' (bad section length) -- run infokey to update it"
msgstr "非法的 infokey 文件“%s” (错误的节长度) -- 运行 infokey 以便更新"

#: info/infomap.c:1036
#, c-format
msgid ""
"Invalid infokey file `%s' (bad section code) -- run infokey to update it"
msgstr "非法的 infokey 文件“%s” (错误的节编码) -- 运行 infokey 以便更新"

#: info/infomap.c:1171
msgid "Bad data in infokey file -- some key bindings ignored"
msgstr "infokey 文件中的错误数据 -- 忽略某些按键绑定"

#: info/infomap.c:1221
msgid "Bad data in infokey file -- some var settings ignored"
msgstr "infokey 文件中的错误数据 -- 忽略某些变量设置"

#: info/m-x.c:68
msgid "Read the name of an Info command and describe it"
msgstr "读取 Info 命令名称并说明它"

#: info/m-x.c:72
msgid "Describe command: "
msgstr "说明命令："

#: info/m-x.c:95
msgid "Read a command name in the echo area and execute it"
msgstr "在回显区读入命令名并执行它"

#: info/m-x.c:139
msgid "Cannot execute an `echo-area' command here."
msgstr "无法在这里运行“回显区”命令。"

#: info/m-x.c:153
#, c-format
msgid "Undefined command: %s"
msgstr "未定义的命令: %s"

#: info/m-x.c:159
msgid "Set the height of the displayed window"
msgstr "设定显示窗口的高度"

#: info/m-x.c:172
#, c-format
msgid "Set screen height to (%d): "
msgstr "将屏幕高度设置为 (%d)："

#: info/makedoc.c:166 info/makedoc.c:174
#, c-format
msgid ""
"   Source files groveled to make this file include:\n"
"\n"
msgstr ""
"   整理源文件以使本文件包括：\n"
"\n"

#: info/makedoc.c:556
#, c-format
msgid "Couldn't manipulate the file %s.\n"
msgstr "无法操作文件 %s。\n"

#: info/nodemenu.c:30
msgid ""
"\n"
"* Menu:\n"
"  (File)Node                        Lines   Size   Containing File\n"
"  ----------                        -----   ----   ---------------"
msgstr ""
"\n"
"* 菜单：\n"
"  (文件)节点                         行      大小    含有文件\n"
"  ----------                        -----   ----   ---------------"

#: info/nodemenu.c:201
msgid ""
"Here is the menu of nodes you have recently visited.\n"
"Select one from this menu, or use `\\[history-node]' in another window.\n"
msgstr ""
"这里是您最近访问节点的菜单。\n"
"从菜单中选择一个，或在其它窗口中使用“\\[history-node]”。\n"

#: info/nodemenu.c:223
msgid "Make a window containing a menu of all of the currently visited nodes"
msgstr "使一个窗口含有一个包括所有当前访问节点的菜单"

#: info/nodemenu.c:303
msgid "Select a node which has been previously visited in a visible window"
msgstr "选择一个已经在可见的窗口中访问的节点"

#: info/nodemenu.c:316
msgid "Select visited node: "
msgstr "选择已访问的节点："

#: info/nodemenu.c:336 info/session.c:2578
#, c-format
msgid "The reference disappeared! (%s)."
msgstr "引用消失了！(%s)。"

#: info/search.c:166
#, c-format
msgid "regexp error: %s"
msgstr "正则表达式错误: %s"

#: info/session.c:164
#, c-format
msgid ""
"Welcome to Info version %s. Type \\[get-help-window] for help, \\[menu-item] "
"for menu item."
msgstr ""
"欢迎使用 Info %s 版。输入 \\[get-help-window] 以获得帮助，\\[menu-item] 将得"
"到菜单。"

#: info/session.c:625
msgid "Move down to the next line"
msgstr "向下移动到下一行"

#: info/session.c:661
msgid "Move up to the previous line"
msgstr "向上移动到上一行"

#: info/session.c:931
msgid "Move to the end of the line"
msgstr "移动到行的末尾"

#: info/session.c:942
msgid "Move to the start of the line"
msgstr "移动到行的开头"

#: info/session.c:1142
msgid "Next"
msgstr "下一个"

#: info/session.c:1158 info/session.c:1283
msgid "No more nodes within this document."
msgstr "本文档中没有更多的节点。"

#: info/session.c:1309
msgid "No `Prev' for this node."
msgstr "本节点没有“上一个”。"

#: info/session.c:1329
msgid "No `Prev' or `Up' for this node within this document."
msgstr "在本文档中没有本节点的“上一个”或“上层”节点。"

#: info/session.c:1391
msgid "Move forwards or down through node structure"
msgstr "在节点结构中向前或向下层移动"

#: info/session.c:1407
msgid "Move backwards or up through node structure"
msgstr "在节点结构中向后或向上层移动"

#: info/session.c:1508
msgid "Scroll forward in this window"
msgstr "在本窗口中向前滚动"

#: info/session.c:1516
msgid "Scroll forward in this window and set default window size"
msgstr "在本窗口中向前滚动并设置为默认窗口大小"

#: info/session.c:1524
msgid "Scroll forward in this window staying within node"
msgstr "在本窗口中向前滚动(不穿越节点)"

#: info/session.c:1532
msgid ""
"Scroll forward in this window staying within node and set default window size"
msgstr "在本窗口中向前滚动(不穿越节点)并设置默认窗口大小"

#: info/session.c:1540
msgid "Scroll backward in this window"
msgstr "在本窗口中向后滚动"

#: info/session.c:1548
msgid "Scroll backward in this window and set default window size"
msgstr "在本窗口中向后滚动并设置为默认窗口大小"

#: info/session.c:1557
msgid "Scroll backward in this window staying within node"
msgstr "在本窗口中向后滚动(不穿越节点)"

#: info/session.c:1565
msgid ""
"Scroll backward in this window staying within node and set default window "
"size"
msgstr "在本窗口中向后滚动(不穿越节点)并设置为默认窗口大小"

#: info/session.c:1573
msgid "Move to the start of this node"
msgstr "移动到本节点的开头"

#: info/session.c:1580
msgid "Move to the end of this node"
msgstr "移动到本节点的末尾"

#: info/session.c:1587
msgid "Scroll down by lines"
msgstr "按行向下滚动"

#: info/session.c:1604
msgid "Scroll up by lines"
msgstr "按行向上滚动"

#: info/session.c:1622
msgid "Scroll down by half screen size"
msgstr "向下滚动半个屏幕"

#: info/session.c:1648
msgid "Scroll up by half screen size"
msgstr "向上滚动半个屏幕"

#: info/session.c:1677
msgid "Select the next window"
msgstr "选择下一个窗口"

#: info/session.c:1716
msgid "Select the previous window"
msgstr "选择上一个窗口"

#: info/session.c:1767
msgid "Split the current window"
msgstr "拆分当前窗口"

#: info/session.c:1848
msgid "Delete the current window"
msgstr "删除当前窗口"

#: info/session.c:1856
msgid "Cannot delete a permanent window"
msgstr "无法删除永久窗口"

#: info/session.c:1888
msgid "Delete all other windows"
msgstr "删除所有其它窗口"

#: info/session.c:1934
msgid "Scroll the other window"
msgstr "滚动其它窗口"

#: info/session.c:1955
msgid "Scroll the other window backward"
msgstr "向后滚动其它窗口"

#: info/session.c:1961
msgid "Grow (or shrink) this window"
msgstr "扩大(或缩小)本窗口"

#: info/session.c:1972
msgid "Divide the available screen space among the visible windows"
msgstr "在可见的窗口间分配可用的屏幕空间"

#: info/session.c:1979
msgid "Toggle the state of line wrapping in the current window"
msgstr "在当前窗口中切换行卷绕状态"

#: info/session.c:1986
msgid "Toggle the usage of regular expressions in searches"
msgstr "切换查寻时正则表达式的用法"

#: info/session.c:1990
msgid "Using regular expressions for searches."
msgstr "使用正则表达式来查寻"

#: info/session.c:1991
msgid "Using literal strings for searches."
msgstr "使用普通字符串来查寻"

#: info/session.c:2162
msgid "Select the Next node"
msgstr "选择下一个节点"

#: info/session.c:2170
msgid "Select the Prev node"
msgstr "选择上一个节点"

#: info/session.c:2178
msgid "Select the Up node"
msgstr "选择上层节点"

#: info/session.c:2185
msgid "Select the last node in this file"
msgstr "选择本文件的最后一个节点"

#: info/session.c:2212 info/session.c:2245
msgid "This window has no additional nodes"
msgstr "该窗口没有附加节点"

#: info/session.c:2218
msgid "Select the first node in this file"
msgstr "选择本文件的第一个节点"

#: info/session.c:2252
msgid "Select the last item in this node's menu"
msgstr "选择本节点菜单中的最后一项"

#: info/session.c:2258
msgid "Select this menu item"
msgstr "选择本菜单项目"

#: info/session.c:2291
#, c-format
msgid "There aren't %d items in this menu."
msgstr "本菜单中没有第 %d 个项目。"

#: info/session.c:2485 info/session.c:2486
#, c-format
msgid "Menu item (%s): "
msgstr "菜单项 (%s)："

#: info/session.c:2489
msgid "Menu item: "
msgstr "菜单项："

#: info/session.c:2496 info/session.c:2497
#, c-format
msgid "Follow xref (%s): "
msgstr "跟随交叉引用 (%s)："

#: info/session.c:2500
msgid "Follow xref: "
msgstr "跟随交叉引用："

#: info/session.c:2629
msgid "Read a menu item and select its node"
msgstr "读取菜单项并选择它的节点"

#: info/session.c:2637
msgid "Read a footnote or cross reference and select its node"
msgstr "读取脚注或交叉引用并选择它的节点"

#: info/session.c:2643
msgid "Move to the start of this node's menu"
msgstr "移动到本节点菜单的开头"

#: info/session.c:2667
msgid "Visit as many menu items at once as possible"
msgstr "立刻访问尽可能多的菜单项"

#: info/session.c:2695
msgid "Read a node name and select it"
msgstr "读取节点名并选择它"

#: info/session.c:2750 info/session.c:2755
msgid "Goto node: "
msgstr "转到节点："

#: info/session.c:2819
#, c-format
msgid "No menu in node `%s'."
msgstr "节点“%s”中没有菜单。"

#: info/session.c:2865
#, c-format
msgid "No menu item `%s' in node `%s'."
msgstr "节点“%2$s”中没有菜单项“%1$s”。"

#: info/session.c:2895
#, c-format
msgid "Unable to find node referenced by `%s' in `%s'."
msgstr "无法在“%2$s”中找到由“%1$s”引用的节点。"

#: info/session.c:2945
msgid "Read a list of menus starting from dir and follow them"
msgstr "读取自 dir 开始的菜单的列表并跟随它们"

#: info/session.c:2947
msgid "Follow menus: "
msgstr "跟随菜单："

#: info/session.c:3140
msgid "Find the node describing program invocation"
msgstr "寻找说明程序调用的节点"

#: info/session.c:3142
#, c-format
msgid "Find Invocation node of [%s]: "
msgstr "寻找 [%s] 的调用节点："

#: info/session.c:3180
msgid "Read a manpage reference and select it"
msgstr "读取一个 man 手册的引用并选择它"

#: info/session.c:3184
msgid "Get Manpage: "
msgstr "获取 man 手册："

#: info/session.c:3214
msgid "Select the node `Top' in this file"
msgstr "选择本文件中的“顶”节点"

#: info/session.c:3220
msgid "Select the node `(dir)'"
msgstr "选择节点“(dir)”"

#: info/session.c:3237 info/session.c:3239
#, c-format
msgid "Kill node (%s): "
msgstr "删除节点 (%s)："

#: info/session.c:3291
#, c-format
msgid "Cannot kill node `%s'"
msgstr "无法删除节点“%s”"

#: info/session.c:3301
msgid "Cannot kill the last node"
msgstr "无法删除最后的节点"

#: info/session.c:3387
msgid "Select the most recently selected node"
msgstr "选择最近选择的节点"

#: info/session.c:3393
msgid "Kill this node"
msgstr "删除本节点"

#: info/session.c:3401
msgid "Read the name of a file and select it"
msgstr "读取文件名并选择它"

#: info/session.c:3405
msgid "Find file: "
msgstr "寻找文件："

#: info/session.c:3422
#, c-format
msgid "Cannot find `%s'."
msgstr "无法寻找“%s”。"

#: info/session.c:3465 info/session.c:3583
#, c-format
msgid "Could not create output file `%s'."
msgstr "无法创建输出文件“%s”。"

#: info/session.c:3479 info/session.c:3601 info/session.c:3661
msgid "Done."
msgstr "完成。"

#: info/session.c:3534
#, c-format
msgid "Writing node %s..."
msgstr "正在写入节点 %s..."

#: info/session.c:3610
msgid "Pipe the contents of this node through INFO_PRINT_COMMAND"
msgstr "通过管道将本节点的内容输出到 INFO_PRINT_COMMAND"

#: info/session.c:3645
#, c-format
msgid "Cannot open pipe to `%s'."
msgstr "无法打开到“%s”的管道。"

#: info/session.c:3651
#, c-format
msgid "Printing node %s..."
msgstr "正在打印节点 %s..."

#: info/session.c:3900
msgid "Search continued from the end of the document."
msgstr "从文档底部继续查寻。"

#: info/session.c:3905
msgid "Search continued from the beginning of the document."
msgstr "从此文档的开头继续查找。"

#: info/session.c:3922
#, c-format
msgid "Searching subfile %s ..."
msgstr "正在搜索子文件 %s ..."

#: info/session.c:3979
msgid "Read a string and search for it case-sensitively"
msgstr "读取一个字符串并以大小写敏感的方式搜索它"

#: info/session.c:3986
msgid "Read a string and search for it"
msgstr "读取一个字符串并搜索它"

#: info/session.c:3994
msgid "Read a string and search backward for it"
msgstr "读取一个字符串并向后搜索它"

#: info/session.c:4030 info/session.c:4036
#, c-format
msgid "%s%s%s [%s]: "
msgstr "%s%s%s [%s]: "

#: info/session.c:4031 info/session.c:4037
msgid "Regexp search"
msgstr "正则表达式查找"

#: info/session.c:4032 info/session.c:4038
msgid " case-sensitively"
msgstr "大小写敏感"

#: info/session.c:4033 info/session.c:4039
msgid " backward"
msgstr "向后搜索"

#: info/session.c:4037
msgid "Search"
msgstr "搜索"

#: info/session.c:4079
msgid "Search failed."
msgstr "搜索失败。"

#: info/session.c:4097
msgid "Repeat last search in the same direction"
msgstr "以相同的方向重复最后的搜索"

#: info/session.c:4100 info/session.c:4110
msgid "No previous search string"
msgstr "没有上次搜索字符串"

#: info/session.c:4107
msgid "Repeat last search in the reverse direction"
msgstr "以相反的方向重复最后的搜索"

#: info/session.c:4126 info/session.c:4132
msgid "Search interactively for a string as you type it"
msgstr "在你输入的同时交互式地搜索字符串"

#: info/session.c:4212
msgid "Regexp I-search backward: "
msgstr "向后增量搜索正则表达式: "

#: info/session.c:4213
msgid "I-search backward: "
msgstr "向后增量搜索："

#: info/session.c:4215
msgid "Regexp I-search: "
msgstr "增量搜索正则表达式: "

#: info/session.c:4216
msgid "I-search: "
msgstr "增量搜索："

#: info/session.c:4241 info/session.c:4243
msgid "Failing "
msgstr "失败 "

#: info/session.c:4734
msgid "Move to the previous cross reference"
msgstr "移动到上一个交叉引用"

#: info/session.c:4752
msgid "Move to the next cross reference"
msgstr "移动到下一个交叉引用"

#: info/session.c:4774
msgid "Select reference or menu item appearing on this line"
msgstr "选择出现在本行中的引用或菜单项"

#: info/session.c:4797
msgid "Cancel current operation"
msgstr "取消当前操作"

#: info/session.c:4804
msgid "Quit"
msgstr "退出"

#: info/session.c:4813
msgid "Move the cursor to a specific line of the window"
msgstr "将光标移动到窗口的指定行"

#: info/session.c:4845
msgid "Redraw the display"
msgstr "重画显示"

#: info/session.c:4882
msgid "Quit using Info"
msgstr "退出 Info"

#: info/session.c:4895
msgid "Run command bound to this key's lowercase variant"
msgstr "运行到绑定到本按键的小写版本的命令"

#: info/session.c:4906
#, c-format
msgid "Unknown command (%s)."
msgstr "未知的命令 (%s)。"

#: info/session.c:4909
#, c-format
msgid "\"%s\" is invalid"
msgstr "“%s”为非法"

#: info/session.c:4910
#, c-format
msgid "`%s' is invalid"
msgstr "“%s”是无效的"

#: info/session.c:5125
msgid "Add this digit to the current numeric argument"
msgstr "将本数字添加到当前数值参数中"

#: info/session.c:5134
msgid "Start (or multiply by 4) the current numeric argument"
msgstr "开启(或乘以 4)当前数值参数"

#: info/session.c:5149
msgid "Internally used by \\[universal-argument]"
msgstr "由 \\[universal-argument] 内部使用"

#: info/tilde.c:336
#, c-format
msgid "readline: Out of virtual memory!\n"
msgstr "readline：虚拟内存耗尽！\n"

#: info/variables.c:37
msgid "When \"On\", footnotes appear and disappear automatically"
msgstr "在“开”时，脚注将自动出现或消失"

#: info/variables.c:41
msgid "When \"On\", creating or deleting a window resizes other windows"
msgstr "在“开”时，创建或删除窗口时改变其它窗口的大小"

#: info/variables.c:45
msgid "When \"On\", flash the screen instead of ringing the bell"
msgstr "在“开”时，将刷新屏幕而不是鸣笛"

#: info/variables.c:49
msgid "When \"On\", errors cause the bell to ring"
msgstr "在“开”时，出错时将鸣笛"

#: info/variables.c:53
msgid "When \"On\", Info garbage collects files which had to be uncompressed"
msgstr "在“开”时，Info 垃圾收集那些必须解压缩的文件"

#: info/variables.c:56
msgid "When \"On\", the portion of the matched search string is highlighted"
msgstr "在“开”时，搜索字符串的匹配部分将被突出显示"

#: info/variables.c:60
msgid "Controls what happens when scrolling is requested at the end of a node"
msgstr "控制在节点末尾时出现滚动请求将发生什么"

#: info/variables.c:65
msgid "Same as scroll-behaviour"
msgstr "等同于滚动行为"

#: info/variables.c:69
msgid "The number lines to scroll when the cursor moves out of the window"
msgstr "当光标移出窗口是所滚动的行数"

#: info/variables.c:73
msgid "Controls whether scroll-behavior affects cursor movement commands"
msgstr "控制滚动行为是否影响光标移动命令"

#: info/variables.c:77
msgid "When \"On\", Info accepts and displays ISO Latin characters"
msgstr "在“开”时，Info 接受并显示 ISO 拉丁字符"

#: info/variables.c:81
msgid ""
"What to do when a scrolling command is issued at the end of the last node"
msgstr "控制在最后一个节点的末尾出现滚动请求时将发生什么"

#: info/variables.c:88
msgid "Explain the use of a variable"
msgstr "解释变量的用法"

#: info/variables.c:94
msgid "Describe variable: "
msgstr "说明变量："

#: info/variables.c:113
msgid "Set the value of an Info variable"
msgstr "设定 Info 变量的值"

#: info/variables.c:119
msgid "Set variable: "
msgstr "设定变量："

#: info/variables.c:137
#, c-format
msgid "Set %s to value (%d): "
msgstr "将 %s 设定为值 (%d)："

#: info/variables.c:178
#, c-format
msgid "Set %s to value (%s): "
msgstr "将 %s 设定为值 (%s)："

#: info/window.c:1026
msgid "--*** Tags out of Date ***"
msgstr "--*** 标记过期 ***"

#: info/window.c:1037
msgid "-----Info: (), lines ----, "
msgstr "-----Info：()，行 ----，"

#: info/window.c:1044
#, c-format
msgid "-%s---Info: %s, %d lines --%s--"
msgstr "-%s---Info：%s，%d 行 --%s--"

#: info/window.c:1048
#, c-format
msgid "-%s%s-Info: (%s)%s, %d lines --%s--"
msgstr "-%s%s-Info：(%s)%s，%d 行 --%s--"

#: info/window.c:1055
#, c-format
msgid " Subfile: %s"
msgstr " 子文件：%s"

#: install-info/install-info.c:221
#, c-format
msgid "%s: warning: "
msgstr "%s：警告："

#: install-info/install-info.c:270
#, c-format
msgid " for %s"
msgstr " %s"

#: install-info/install-info.c:500
#, c-format
msgid "\tTry `%s --help' for a complete list of options.\n"
msgstr "\t试用“%s --help”以获得选项的完整列表。\n"

#: install-info/install-info.c:508
#, c-format
msgid "Usage: %s [OPTION]... [INFO-FILE [DIR-FILE]]\n"
msgstr "用法: %s [OPTION]... [INFO-FILE [DIR-FILE]]\n"

#: install-info/install-info.c:510
msgid "Add or remove entries in INFO-FILE from the Info directory DIR-FILE."
msgstr "从 Info 目录 DIR-FILE 的 INFO-FILE 文件中添加或移除条目。"

#: install-info/install-info.c:513
msgid ""
"Options:\n"
" --debug             report what is being done.\n"
" --delete            delete existing entries for INFO-FILE from DIR-FILE;\n"
"                      don't insert any new entries.\n"
" --description=TEXT  the description of the entry is TEXT; used with\n"
"                      the --name option to become synonymous with the\n"
"                      --entry option.\n"
" --dir-file=NAME     specify file name of Info directory file;\n"
"                      equivalent to using the DIR-FILE argument.\n"
" --dry-run           same as --test."
msgstr ""
"选项:\n"
" --debug             报告正在处理的事。\n"
" --delete            从 DIR-FILE 中删除存在的 INFO-FILE 条目；\n"
"                      不插入任何新的条目。\n"
" --description=TEXT  条目的说明为 TEXT；与 --name 选项\n"
"                      同用跟与 --entry 选项同用\n"
"                      是一样的。\n"
" --dir-file=NAME     指定 Info 目录文件的文件名；\n"
"                      等同于使用 DIR-FILE 参数。\n"
" --dry-run           等同于 --test。"

#: install-info/install-info.c:525
msgid ""
" --entry=TEXT        insert TEXT as an Info directory entry.\n"
"                      TEXT is written as an Info menu item line followed\n"
"                       by zero or more extra lines starting with "
"whitespace.\n"
"                      If you specify more than one entry, all are added.\n"
"                      If you don't specify any entries, they are determined\n"
"                       from information in the Info file itself.\n"
"                      When removing, TEXT specifies the entry to remove.\n"
"                      TEXT is only removed as a last resort, if the\n"
"                      entry as determined from the Info file is not "
"present,\n"
"                      and the basename of the Info file isn't found either."
msgstr ""
" --entry=TEXT        插入 TEXT 作为一个 Info 目录条目。\n"
"                      所写入的 TEXT 要作为一个 Info 菜单项后跟\n"
"                       0 个或多个以空格开始的行。\n"
"                      如果您指定一个以上的条目，将添加所有条目。\n"
"                      如果您未指定任何条目，它们由来自 Info 文件\n"
"                       自身的信息决定。\n"
"                      删除时， TEXT 指定了要删除的条目。\n"
"                      仅当 Info 文件中作为删除定义的条目不存在，\n"
"                      并且还找不到 Info 文件的目录名，\n"
"\t\t\t那 TEXT 才会作为最后的删除手段。"

#: install-info/install-info.c:537
msgid ""
" --help              display this help and exit.\n"
" --info-dir=DIR      same as --dir-file=DIR/dir.\n"
" --info-file=FILE    specify Info file to install in the directory;\n"
"                      equivalent to using the INFO-FILE argument.\n"
" --item=TEXT         same as --entry=TEXT.\n"
" --keep-old          do not replace entries, or remove empty sections.\n"
" --menuentry=TEXT    same as --name=TEXT.\n"
" --name=TEXT         the name of the entry is TEXT; used with --description\n"
"                      to become synonymous with the --entry option.\n"
" --no-indent         do not format new entries in the DIR file.\n"
" --quiet             suppress warnings."
msgstr ""
" --help              显示此帮助并退出。\n"
" --info-dir=DIR      等同于 --dir-file=DIR/dir。\n"
" --info-file=FILE    在目录中指定要安装的 Info 文件；\n"
"                      等同于使用 INFO-FILE 参数。\n"
" --item=TEXT         等同于 --entry=TEXT。\n"
" --keep-old          不要替换条目，或是删除空白字段。\n"
" --menuentry=TEXT    等同于 --name=TEXT。\n"
" --name=TEXT         条目名为 TEXT；与 --description 同用\n"
"                      跟与 --entry 选项同用是一样的。\n"
" --no-indent         不要在 DIR 文件中格式化新的条目。\n"
" --quiet             不要输出警告。"

#: install-info/install-info.c:550
msgid ""
" --regex=R           put this file's entries in all sections that match the\n"
"                      regular expression R (ignoring case).\n"
" --remove            same as --delete.\n"
" --remove-exactly    only remove if the info file name matches exactly;\n"
"                      suffixes such as .info and .gz are not ignored.\n"
" --section=SEC       put entries in section SEC of the directory.\n"
"                      If you specify more than one section, all the entries\n"
"                       are added in each of the sections.\n"
"                      If you don't specify any sections, they are "
"determined\n"
"                       from information in the Info file itself.\n"
" --section R SEC     equivalent to --regex=R --section=SEC --add-once."
msgstr ""
" --regex=R           将此文件的条目放入所有匹配正则表达式\n"
"\t\t\t R(忽略大小写)的字段。\n"
" --remove            等同于 --delete。\n"
" --remove-exactly    仅当完全匹配 info 文件名时才删除；\n"
"                      不要忽略类似 .info 和 .gz 这样的后缀。\n"
" --section=SEC       将条目放入目录的 SEC 字段。\n"
"                      如果您指定一个以上的字段，所有的条目将被添加至\n"
"                       每个字段。\n"
"                      如果您未指定任何字段，它们将由 Info 文件\n"
"                       自身的信息来决定。\n"
" --section R SEC     等同于 --regex=R --section=SEC --add-once。"

#: install-info/install-info.c:563
msgid ""
" --silent            suppress warnings.\n"
" --test              suppress updating of DIR-FILE.\n"
" --version           display version information and exit."
msgstr ""
" --silent            不输出警告。\n"
" --test              不更新 DIR-FILE。\n"
" --version           显示版本信息并退出。"

#: install-info/install-info.c:570
msgid ""
"Email bug reports to bug-texinfo@gnu.org,\n"
"general questions and discussion to help-texinfo@gnu.org.\n"
"Texinfo home page: http://www.gnu.org/software/texinfo/"
msgstr ""
"请将错误报告发送到 bug-texinfo@gnu.org，\n"
"一般的问题和讨论请发送到 help-texinfo@gnu.org。\n"
"Texinfo 主页：http://www.gnu.org/software/texinfo/"

#: install-info/install-info.c:597
#, c-format
msgid ""
"This is the file .../info/dir, which contains the\n"
"topmost node of the Info hierarchy, called (dir)Top.\n"
"The first time you invoke Info you start off looking at this node.\n"
"\n"
"%s\tThis is the top of the INFO tree\n"
"\n"
"  This (the Directory node) gives a menu of major topics.\n"
"  Typing \"q\" exits, \"?\" lists all Info commands, \"d\" returns here,\n"
"  \"h\" gives a primer for first-timers,\n"
"  \"mEmacs<Return>\" visits the Emacs manual, etc.\n"
"\n"
"  In Emacs, you can click mouse button 2 on a menu item or cross reference\n"
"  to select it.\n"
"\n"
"%s\n"
msgstr ""
"这是文件 .../info/dir，它含有 Info 层次\n"
"结构的最顶层节点，称为 (dir)Top。\n"
"您第一次调用 Info 您将从该节点开始。\n"
"\n"
"%s\t这是 INFO 树的顶\n"
"\n"
"  这里 (the Directory node) 给出了主要主题的菜单。\n"
"  输入“q”将退出，输入“?”将列举所有 Info 命令，输入\n"
"  “d”将返回这里。输入“h”将给初次使用的用户一个摘要，\n"
"  输入“mEmacs<Return>”将访问 Emacs 手册，等等。\n"
"\n"
"  在 Emacs中，您可以在菜单项目或交叉引用上点击鼠标右键以\n"
"  选择它。\n"
"\n"
"%s\n"

#: install-info/install-info.c:622
#, c-format
msgid "%s: could not read (%s) and could not create (%s)\n"
msgstr "%s：即无法读入 (%s) 也无法创建 (%s)\n"

#: install-info/install-info.c:715
#, c-format
msgid "%s: empty file"
msgstr "%s：空文件"

#: install-info/install-info.c:1046 install-info/install-info.c:1086
msgid "START-INFO-DIR-ENTRY without matching END-INFO-DIR-ENTRY"
msgstr "START-INFO-DIR-ENTRY 没有匹配的 END-INFO-DIR-ENTRY"

#: install-info/install-info.c:1081
msgid "END-INFO-DIR-ENTRY without matching START-INFO-DIR-ENTRY"
msgstr "END-INFO-DIR-ENTRY 没有匹配的 START-INFO-DIR-ENTRY"

#: install-info/install-info.c:1946 install-info/install-info.c:1956
#, c-format
msgid "%s: already have dir file: %s\n"
msgstr "%s: 已经存在了 dir 文件: %s\n"

#: install-info/install-info.c:2036
#, c-format
msgid "%s: Specify the Info file only once.\n"
msgstr "%s：Info 文件只应该指定一次。\n"

#: install-info/install-info.c:2069
#, c-format
msgid "Extra regular expression specified, ignoring `%s'"
msgstr "指定了额外的正则表达式，忽略 “%s”"

#: install-info/install-info.c:2081
#, c-format
msgid "Error in regular expression `%s': %s"
msgstr "正则表达式“%s”中存在错误: %s"

#: install-info/install-info.c:2139
#, c-format
msgid "excess command line argument `%s'"
msgstr "多余的命令行参数“%s”"

#: install-info/install-info.c:2143
msgid "No input file specified; try --help for more information."
msgstr "没有指定输出文件；试用 --help 以获得更多信息。"

#: install-info/install-info.c:2146
msgid "No dir file specified; try --help for more information."
msgstr "没有指定目录文件；试用 --help 以获得更多信息。"

#: install-info/install-info.c:2288
#, c-format
msgid "no info dir entry in `%s'"
msgstr "“%s”中没有 info 目录条目"

#: install-info/install-info.c:2536
#, c-format
msgid "no entries found for `%s'; nothing deleted"
msgstr "找不到关于“%s”的条目；未删除"

#: lib/xexit.c:54
msgid "ferror on stdout\n"
msgstr "标准输出上 ferror 错误\n"

#: lib/xexit.c:59
msgid "fflush error on stdout\n"
msgstr "标准输出上 fflush 错误\n"

#: makeinfo/cmds.c:582 makeinfo/cmds.c:604
#, c-format
msgid "arguments to @%s ignored"
msgstr "@%s 的参数被忽略了"

#: makeinfo/cmds.c:779
msgid "January"
msgstr "一月"

#: makeinfo/cmds.c:779
msgid "February"
msgstr "二月"

#: makeinfo/cmds.c:779
msgid "March"
msgstr "三月"

#: makeinfo/cmds.c:779
msgid "April"
msgstr "四月"

#: makeinfo/cmds.c:779
msgid "May"
msgstr "五月"

#: makeinfo/cmds.c:780
msgid "June"
msgstr "六月"

#: makeinfo/cmds.c:780
msgid "July"
msgstr "七月"

#: makeinfo/cmds.c:780
msgid "August"
msgstr "八月"

#: makeinfo/cmds.c:780
msgid "September"
msgstr "九月"

#: makeinfo/cmds.c:780
msgid "October"
msgstr "十月"

#: makeinfo/cmds.c:781
msgid "November"
msgstr "十一月"

#: makeinfo/cmds.c:781
msgid "December"
msgstr "十二月"

#: makeinfo/cmds.c:1131
#, c-format
msgid "unlikely character %c in @var"
msgstr "@var 中不可靠的字符 %c"

#: makeinfo/cmds.c:1174
msgid "@sc argument all uppercase, thus no effect"
msgstr "@sc 的参数全部为大写，因此无效"

#: makeinfo/cmds.c:1229
#, c-format
msgid "`{' expected, but saw `%c'"
msgstr "应为“{”，但看到了“%c”"

#: makeinfo/cmds.c:1269
msgid "end of file inside verb block"
msgstr "文件在原文块中结束"

#: makeinfo/cmds.c:1277
#, c-format
msgid "`}' expected, but saw `%c'"
msgstr "应为“}”，但看到了“%c”"

#: makeinfo/cmds.c:1308
msgid ""
"@strong{Note...} produces a spurious cross-reference in Info; reword to "
"avoid that"
msgstr "@strong{Note...} 在 Info 中形成了一个假的交叉引用；可通过重写避免此事"

#: makeinfo/cmds.c:1504
#, c-format
msgid "%c%s is obsolete"
msgstr "%c%s 已过时"

#: makeinfo/cmds.c:1612
#, c-format
msgid "@sp requires a positive numeric argument, not `%s'"
msgstr "@sp 需要正数参数，而不是“%s”"

#: makeinfo/cmds.c:2023 makeinfo/footnote.c:81
#, c-format
msgid "Bad argument to %c%s"
msgstr "%c%s 的错误参数"

#: makeinfo/cmds.c:2033 makeinfo/makeinfo.c:4317
msgid "asis"
msgstr "asis"

#: makeinfo/cmds.c:2035 makeinfo/cmds.c:2065 makeinfo/makeinfo.c:4319
msgid "none"
msgstr "none"

#: makeinfo/cmds.c:2049
#, c-format
msgid "Bad argument to @%s"
msgstr "@%s 的参数错误"

#: makeinfo/cmds.c:2063
msgid "insert"
msgstr "插入"

#: makeinfo/cmds.c:2079
#, c-format
msgid "Bad argument to @%s: %s"
msgstr "@%s 的错误参数: %s"

#: makeinfo/cmds.c:2162
#, c-format
msgid "Expected @%s on or off, not `%s'"
msgstr "应当 @%s 开启或关闭，而不是“%s”"

#: makeinfo/cmds.c:2182
#, c-format
msgid "Only @%s 10 or 11 is supported, not `%s'"
msgstr "仅支持 @%s 10 或 11，而不是“%s”"

#: makeinfo/defun.c:83
msgid "Missing `}' in @def arg"
msgstr "@def 的参数遗漏了“}”"

#: makeinfo/defun.c:711
#, c-format
msgid "Must be in `@%s' environment to use `@%s'"
msgstr "必须在“@%s”环境变量中使用“@%s”"

#: makeinfo/files.c:434
#, c-format
msgid "%s: getwd: %s, %s\n"
msgstr "%s：getwd：%s，%s\n"

#: makeinfo/files.c:637
#, c-format
msgid "`%s' omitted before output filename"
msgstr "在输出文件名前遗漏了“%s”"

#: makeinfo/files.c:645
#, c-format
msgid "`%s' omitted since writing to stdout"
msgstr "写入标准输出前遗漏了“%s”"

#: makeinfo/files.c:693
msgid "Output buffer not empty."
msgstr "输出缓冲区非空。"

#: makeinfo/float.c:181
#, c-format
msgid "Requested float type `%s' not previously used"
msgstr "所要的浮点类型“%s”不是上次所用的"

#: makeinfo/float.c:376 makeinfo/float.c:382 makeinfo/index.c:959
#: makeinfo/index.c:965
msgid "See "
msgstr "参阅 "

#: makeinfo/footnote.c:149
#, c-format
msgid "`%c%s' needs an argument `{...}', not just `%s'"
msgstr "“%c%s”需要参数“{...}”，而不仅仅是“%s”"

#: makeinfo/footnote.c:164
#, c-format
msgid "No closing brace for footnote `%s'"
msgstr "脚注“%s”没有闭合花括号"

#: makeinfo/footnote.c:197
msgid "Footnote defined without parent node"
msgstr "定义的脚注没有父节点"

#: makeinfo/footnote.c:209
msgid "Footnotes inside footnotes are not allowed"
msgstr "脚注内的脚注是不允许的"

#: makeinfo/footnote.c:301 makeinfo/index.c:187
msgid "Footnotes"
msgstr "脚注"

#: makeinfo/html.c:91
#, c-format
msgid "%s: could not open --css-file: %s"
msgstr "%s: 无法打开 --css-file: %s"

#: makeinfo/html.c:180
#, c-format
msgid "%s:%d: --css-file ended in comment"
msgstr "%s:%d: --css-file 以注释结尾"

#: makeinfo/html.c:426
msgid "[unexpected] no html tag to pop"
msgstr "[未预料到的] 无 html 标记弹出 "

#: makeinfo/html.c:800
#, c-format
msgid "[unexpected] invalid node name: `%s'"
msgstr "[未预料到的] 无效的节点名称: “%s”"

#: makeinfo/index.c:167
#, c-format
msgid "Unknown index `%s'"
msgstr "未知的索引“%s”"

#: makeinfo/index.c:232
#, c-format
msgid "Info cannot handle `:' in index entry `%s'"
msgstr "Info 无法处理索引条目“%s”中的“:”"

#: makeinfo/index.c:410
#, c-format
msgid "Index `%s' already exists"
msgstr "索引“%s”已经存在"

#: makeinfo/index.c:453
#, c-format
msgid "Unknown index `%s' and/or `%s' in @synindex"
msgstr "@synindex 中的未知索引“%s”和/或“%s”"

#: makeinfo/index.c:676
msgid "(line )"
msgstr "(行 )"

#: makeinfo/index.c:684
#, c-format
msgid "(line %*d)"
msgstr "(行 %*d)"

#: makeinfo/index.c:765
#, c-format
msgid "Unknown index `%s' in @printindex"
msgstr "@printindex 中的未知索引“%s”"

#: makeinfo/index.c:834
#, c-format
msgid "Entry for index `%s' outside of any node"
msgstr "关于索引“%s”的条目超出了所有节点"

#: makeinfo/index.c:837 makeinfo/index.c:873
msgid "(outside of any node)"
msgstr "(超出任何节点)"

#: makeinfo/insertion.c:161
#, fuzzy
msgid "@item not allowed in argument to @itemize"
msgstr "参数中不允许 @item 改为 @itemize"

#: makeinfo/insertion.c:242
msgid "Broken-Type in insertion_type_pname"
msgstr "insertion_type_pname 中的错误类型"

#: makeinfo/insertion.c:338
msgid "Enumeration stack overflow"
msgstr "枚举栈溢出"

#: makeinfo/insertion.c:370
#, c-format
msgid "lettering overflow, restarting at %c"
msgstr "字符编号溢出，从 %c 重新开始"

#: makeinfo/insertion.c:639
#, c-format
msgid "%s requires an argument: the formatter for %citem"
msgstr "%s 需要一个参数: %citem 的格式化参数"

#: makeinfo/insertion.c:727
#, c-format
msgid "%cfloat environments cannot be nested"
msgstr "%cfloat 环境变量不能嵌套"

#: makeinfo/insertion.c:981
#, c-format
msgid "`@end' expected `%s', but saw `%s'"
msgstr "“@end”需要“%s”，但看到“%s”"

#: makeinfo/insertion.c:1349
#, c-format
msgid "No matching `%cend %s'"
msgstr "没有匹配的“%cend %s”"

#: makeinfo/insertion.c:1618
#, c-format
msgid "%s requires letter or digit"
msgstr "%s 需要字母或数字"

#: makeinfo/insertion.c:1718
msgid "end of file inside verbatim block"
msgstr "文件在原文块中结束"

#: makeinfo/insertion.c:1942
#, c-format
msgid "@%s not meaningful outside `@float' environment"
msgstr "“@float”环境变量外的 @%s 是没有意义的"

#: makeinfo/insertion.c:1978
msgid "@menu seen before first @node, creating `Top' node"
msgstr "在第一个节点之前遇到 @menu，正在创建“顶”节点"

#: makeinfo/insertion.c:1979
msgid ""
"perhaps your @top node should be wrapped in @ifnottex rather than @ifinfo?"
msgstr "您的 @top 节点可能应该包含在 @ifnottex 而不是 @ifinfo 中？"

#: makeinfo/insertion.c:1991
msgid "@detailmenu seen before first node, creating `Top' node"
msgstr "在第一个节点之前遇到 @detailmenu，正在创建“顶”节点"

#: makeinfo/insertion.c:2047
#, c-format
msgid "@%s not meaningful outside `@titlepage' and `@quotation' environments"
msgstr "在“@titlepage”和“@quotation”环境变量外 @%s 无意义"

#: makeinfo/insertion.c:2061
#, c-format
msgid "@%s not meaningful outside `@titlepage' environment"
msgstr "“@titlepage”环境变量外的 @%s 是没有意义的"

#: makeinfo/insertion.c:2092
#, c-format
msgid "Unmatched `%c%s'"
msgstr "未匹配的“%c%s”"

#: makeinfo/insertion.c:2097
#, c-format
msgid "`%c%s' needs something after it"
msgstr "“%c%s”之后需要有些什么"

#: makeinfo/insertion.c:2103
#, c-format
msgid "Bad argument `%s' to `@%s', using `%s'"
msgstr "“%s”的错误参数“@%s”，使用“%s”"

#: makeinfo/insertion.c:2200
#, c-format
msgid "@%s not meaningful inside `@%s' block"
msgstr "在“@%2$s”块中“@%1$s”是没有意义的"

#: makeinfo/insertion.c:2209
#, c-format
msgid "@itemx not meaningful inside `%s' block"
msgstr "在“%s”块中 @itemx 是没有意义的"

#: makeinfo/insertion.c:2383
#, c-format
msgid "%c%s found outside of an insertion block"
msgstr "在插入块之外发现了 %c%s"

#: makeinfo/lang.c:1218
#, c-format
msgid "no default territory known for language `%s'"
msgstr "语言“%s”无已知的默认地区"

#: makeinfo/lang.c:1281
#, c-format
msgid "%s is not a valid ISO 639 language code"
msgstr "%s 在 ISO 639 语言编码中是无效的"

#: makeinfo/lang.c:1399
#, c-format
msgid "unrecognized encoding name `%s'"
msgstr "不能识别的编码名称“%s”"

#: makeinfo/lang.c:1407
#, c-format
msgid "sorry, encoding `%s' not supported"
msgstr "抱歉，不支持编码“%s”"

#: makeinfo/lang.c:1492
#, c-format
msgid "invalid encoded character `%s'"
msgstr "无效的编码字符“%s”"

#: makeinfo/lang.c:1800
#, c-format
msgid "%c%s expects `i' or `j' as argument, not `%c'"
msgstr "%c%s 的参数应为“i”或“j”，而不是“%c”"

#: makeinfo/lang.c:1804
#, c-format
msgid "%c%s expects a single character `i' or `j' as argument"
msgstr "%c%s 需要以单个字符“i”或“j”为参数"

#: makeinfo/macro.c:128
#, c-format
msgid "macro `%s' previously defined"
msgstr "宏“%s”已在前面定义"

#: makeinfo/macro.c:132
#, c-format
msgid "here is the previous definition of `%s'"
msgstr "这里是“%s”前面的定义"

#: makeinfo/macro.c:359
#, c-format
msgid "\\ in macro expansion followed by `%s' instead of parameter name"
msgstr "\\ 以带有“%s”的宏展开式代替参数名称"

#: makeinfo/macro.c:401
#, c-format
msgid "Macro `%s' called on line %d with too many args"
msgstr "在第 %2$d 行中以过多的参数调用宏“%1$s”"

#: makeinfo/macro.c:580
#, c-format
msgid "%cend macro not found"
msgstr "找不到宏 %cend"

#: makeinfo/macro.c:591
msgid "@allow-recursion is deprecated; please use @rmacro instead"
msgstr "不赞成使用 @allow-recursion；请使用 @rmacro 代替 "

#: makeinfo/macro.c:606
msgid "@quote-arg is deprecated; arguments are quoted by default"
msgstr "不赞成使用 @quote-arg；参数是默认引用的"

#: makeinfo/macro.c:649
#, c-format
msgid "mismatched @end %s with @%s"
msgstr "@end %s 和 @%s 不匹配"

#: makeinfo/makeinfo.c:188
#, c-format
msgid "Too many errors!  Gave up.\n"
msgstr "过多的错误！放弃。\n"

#: makeinfo/makeinfo.c:306
#, c-format
msgid "%s:%d: warning: "
msgstr "%s：%d：警告："

#: makeinfo/makeinfo.c:325 makeinfo/makeinfo.c:2340
#, c-format
msgid "Misplaced %c"
msgstr "错误放置的 %c"

#: makeinfo/makeinfo.c:344
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr "试用“%s --help”以获取更多信息。\n"

#: makeinfo/makeinfo.c:347
#, c-format
msgid "Usage: %s [OPTION]... TEXINFO-FILE...\n"
msgstr "用法：%s [选项]... TEXINFO-文件...\n"

#: makeinfo/makeinfo.c:350
msgid ""
"Translate Texinfo source documentation to various other formats, by default\n"
"Info files suitable for reading online with Emacs or standalone GNU Info.\n"
msgstr ""
"将 Texinfo 源文件转换为其它各种格式，默认转换为适于\n"
"由 Emacs 或独立 GNU Info 在线浏览的 Info 文件。\n"

#: makeinfo/makeinfo.c:354
#, c-format
msgid ""
"General options:\n"
"      --error-limit=NUM       quit after NUM errors (default %d).\n"
"      --document-language=STR locale to use in translating Texinfo keywords\n"
"                                for the output document (default C).\n"
"      --force                 preserve output even if errors.\n"
"      --help                  display this help and exit.\n"
"      --no-validate           suppress node cross-reference validation.\n"
"      --no-warn               suppress warnings (but not errors).\n"
"  -v, --verbose               explain what is being done.\n"
"      --version               display version information and exit.\n"
msgstr ""
"通用选项：\n"
"      --error-limit=NUM       在 NUM 个错误后退出 (默认为 %d)。\n"
"      --document-language=STR 为输出的文档翻译 Texinfo 关键字时所用\n"
"                               的地区代码(默认为 C)。\n"
"      --force                 即使出现错误也保留输出文件。\n"
"      --help                  显示该求助信息并退出。\n"
"      --no-validate           不进行交叉引用检查。\n"
"      --no-warn               不输出警告 (不涉及错误)。\n"
"  -v, --verbose               解释都做了些什么。\n"
"      --version               显示版本信息并退出。\n"

#: makeinfo/makeinfo.c:369
#, no-wrap
msgid ""
"Output format selection (default is to produce Info):\n"
"      --docbook               output Docbook XML rather than Info.\n"
"      --html                  output HTML rather than Info.\n"
"      --xml                   output Texinfo XML rather than Info.\n"
"      --plaintext             output plain text rather than Info.\n"
msgstr ""
"输出格式选择 (默认生成 Info 文件)：\n"
"      --docbook             输出 DocBook 而不是 Info。\n"
"      --html                输出 HTML 而不是 Info。\n"
"      --xml                 输出 XML (TexinfoML) 而不是 Info。\n"
"      --plaintext           输出普通文本而不是 Info。\n"

#: makeinfo/makeinfo.c:377
msgid ""
"General output options:\n"
"  -E, --macro-expand=FILE     output macro-expanded source to FILE,\n"
"                                ignoring any @setfilename.\n"
"      --no-headers            suppress node separators, Node: lines, and "
"menus\n"
"                                from Info output (thus producing plain "
"text)\n"
"                                or from HTML (thus producing shorter "
"output);\n"
"                                also, write to standard output by default.\n"
"      --no-split              suppress the splitting of Info or HTML "
"output,\n"
"                                generate only one output file.\n"
"      --number-sections       output chapter and sectioning numbers.\n"
"  -o, --output=FILE           output to FILE (or directory if split HTML).\n"
msgstr ""
"通用输出选项：\n"
"  -E, --macro-expand FILE   将宏扩展源输出到文件 FILE。\n"
"                            忽略所有 @setfilename。\n"
"      --no-headers          不在 Info 输出或 HTML 输出中生成节点分隔符，\n"
"                              节点：行，和菜单。从而生成普通文本(Info\n"
"                              输出)或较短的输出(HTML 输出)；\n"
"                              此外, 默认输出到标准输出。\n"
"      --no-split            不是生成分割的 Info 或 HTML 输出，\n"
"                            而是生成单个输出文件。\n"
"      --number-sections     输出章节编号。\n"
"  -o, --output=FILE         输出到文件 FILE (如果是分割的 HTML 则为目录)。\n"

#: makeinfo/makeinfo.c:391
#, c-format
msgid ""
"Options for Info and plain text:\n"
"      --disable-encoding      do not output accented and special characters\n"
"                                in Info output based on @documentencoding.\n"
"      --enable-encoding       override --disable-encoding (default).\n"
"      --fill-column=NUM       break Info lines at NUM characters (default %"
"d).\n"
"      --footnote-style=STYLE  output footnotes in Info according to STYLE:\n"
"                                `separate' to put them in their own node;\n"
"                                `end' to put them at the end of the node, "
"in\n"
"                                which they are defined (this is the "
"default).\n"
"      --paragraph-indent=VAL  indent Info paragraphs by VAL spaces (default %"
"d).\n"
"                                If VAL is `none', do not indent; if VAL is\n"
"                                `asis', preserve existing indentation.\n"
"      --split-size=NUM        split Info files at size NUM (default %d).\n"
msgstr ""
"Info 和普通文本选项：\n"
"      --disable-encoding      不要根据 @documentencoding 输出 Info 输出中的\n"
"                                重音和特殊字符。\n"
"      --enable-encoding       覆盖 --disable-encoding 设置(默认)。\n"
"      --fill-column=NUM       在第 NUM 个字符处切分 Info 行 (默认为 %d)。\n"
"      --footnote-style=STYLE  根据 STYLE 输出 Info 中的脚注：\n"
"                                “separate”将脚注置于独立的节点；\n"
"                                “end”将脚注置于定义它的节点的末尾(默认)。\n"
"      --paragraph-indent=VAL  将 Info 段对齐到 VAL 个空格 (默认为 %d).\n"
"                                如果 VAL 为“none”，则不对齐；如果 VAL 为\n"
"                                “asis”，保留现有的对齐。\n"
"      --split-size=NUM        在大小 NUM 的时候拆分 Info 文件 (默认为 %d)。\n"

#: makeinfo/makeinfo.c:409
msgid ""
"Options for HTML:\n"
"      --css-include=FILE      include FILE in HTML <style> output;\n"
"                                read stdin if FILE is -.\n"
"      --css-ref=URL           generate reference to a CSS file.\n"
"      --internal-links=FILE   produce list of internal links in FILE.\n"
"      --transliterate-file-names\n"
"                              produce file names in ASCII transliteration.\n"
msgstr ""
"HTML 选项:\n"
"      --css-include=FILE      在 HTML <style> 输出中包含 FILE；\n"
"                                如果 FILE 是 - 将从标准输入读取内容。\n"
"      --css-ref=URL           生成一个 CSS 文件的参考。\n"
"      --internal-links=FILE   生成 FILE 中内部连接列表。\n"
"      --transliterate-file-names\n"
"                              以 ASCII 字义生成文件名。\n"

#: makeinfo/makeinfo.c:419
#, c-format
msgid ""
"Options for XML and Docbook:\n"
"      --output-indent=VAL     indent XML elements by VAL spaces (default %"
"d).\n"
"                                If VAL is 0, ignorable whitespace is "
"dropped.\n"
msgstr ""
"XML 和 Docbook 选项:\n"
"      --output-indent=VAL     用 VAL 个空格缩进 XML 元素(默认 %d)。\n"
"                                如果 VAL 为 0，将丢弃可忽略的空格。\n"

#: makeinfo/makeinfo.c:426
msgid ""
"Input file options:\n"
"      --commands-in-node-names  allow @ commands in node names.\n"
"  -D VAR                        define the variable VAR, as with @set.\n"
"  -I DIR                        append DIR to the @include search path.\n"
"  -P DIR                        prepend DIR to the @include search path.\n"
"  -U VAR                        undefine the variable VAR, as with @clear.\n"
msgstr ""
"输入文件选项：\n"
"      --commands-in-node-names   允许在节点名中使用 @ 命令。\n"
"  -D VAR                         定义变量 VAR，就象 @set。\n"
"  -I DIR                         将 DIR 附加到 @include 搜索路径之后。\n"
"  -P DIR                         将 DIR 追加到 @include 搜索路径之前。\n"
"  -U VAR                         取消变量 VAR 的定义，就象 @clear。\n"

#: makeinfo/makeinfo.c:435
msgid ""
"Conditional processing in input:\n"
"  --ifdocbook       process @ifdocbook and @docbook even if\n"
"                      not generating Docbook.\n"
"  --ifhtml          process @ifhtml and @html even if not generating HTML.\n"
"  --ifinfo          process @ifinfo even if not generating Info.\n"
"  --ifplaintext     process @ifplaintext even if not generating plain text.\n"
"  --iftex           process @iftex and @tex; implies --no-split.\n"
"  --ifxml           process @ifxml and @xml.\n"
"  --no-ifdocbook    do not process @ifdocbook and @docbook text.\n"
"  --no-ifhtml       do not process @ifhtml and @html text.\n"
"  --no-ifinfo       do not process @ifinfo text.\n"
"  --no-ifplaintext  do not process @ifplaintext text.\n"
"  --no-iftex        do not process @iftex and @tex text.\n"
"  --no-ifxml        do not process @ifxml and @xml text.\n"
"\n"
"  Also, for the --no-ifFORMAT options, do process @ifnotFORMAT text.\n"
msgstr ""
"输入中的条件处理：\n"
"  --ifdocbook       即使不生成 Docbook \n"
"                     也处理 @ifdocbook 和 @docbook。\n"
"  --ifhtml          即使不是生成 HTML 也处理 @ifhtml 和 @html。\n"
"  --ifinfo          即使不是生成 Info 也处理 @ifinfo。\n"
"  --ifplaintext     即使不是生成普通文本也处理 @ifplaintext。\n"
"  --iftex           处理 @iftex 和 @tex；隐含 --no-split。\n"
"  --no-ifhtml       不要处理 @ifhtml 和 @html 文本。\n"
"  --no-ifinfo       不要处理 @ifinfo 文本。\n"
"  --no-ifplaintext  不要处理 @ifplaintext 文本。\n"
"  --no-iftex        不要处理 @iftex 和 @tex 文本。\n"

#: makeinfo/makeinfo.c:454
msgid ""
"  The defaults for the @if... conditionals depend on the output format:\n"
"  if generating HTML, --ifhtml is on and the others are off;\n"
"  if generating Info, --ifinfo is on and the others are off;\n"
"  if generating plain text, --ifplaintext is on and the others are off;\n"
"  if generating XML, --ifxml is on and the others are off.\n"
msgstr ""
"  @if... 条件的默认值倚赖于输出格式：\n"
"  如果生成 HTML，则 --ifhtml 默认开启而其它的默认关闭；\n"
"  如果生成 Info，则 --ifinfo 默认开启而其它的默认关闭；\n"
"  如果生成普通文本，则 --ifplaintext 默认开启而其它默认关闭；\n"
"  如果生成 XML，则 --ifxml 默认开启而其它默认关闭。\n"

#: makeinfo/makeinfo.c:462
msgid ""
"Examples:\n"
"  makeinfo foo.texi                      write Info to foo's @setfilename\n"
"  makeinfo --html foo.texi               write HTML to @setfilename\n"
"  makeinfo --xml foo.texi                write Texinfo XML to @setfilename\n"
"  makeinfo --docbook foo.texi            write DocBook XML to @setfilename\n"
"  makeinfo --no-headers foo.texi         write plain text to standard "
"output\n"
"\n"
"  makeinfo --html --no-headers foo.texi  write html without node lines, "
"menus\n"
"  makeinfo --number-sections foo.texi    write Info with numbered sections\n"
"  makeinfo --no-split foo.texi           write one Info file however big\n"
msgstr ""
"示例：\n"
"  makeinfo foo.texi                     将 Info 写入到 foo 的 @setfilename\n"
"  makeinfo --html foo.texi              将 HTML 写入到 @setfilename\n"
"  makeinfo --xml foo.texi               将 Texinfo XML 写入到 @setfilename\n"
"  makeinfo --docbook foo.texi           将 DocBook XML 写入到 @setfilename\n"
"  makeinfo --no-headers foo.texi        将普通文本写入到标准输出\n"
"\n"
"  makeinfo --html --no-headers foo.texi 输出 html 而不输出节点行和菜单\n"
"  makeinfo --number-sections foo.texi   输出带有编号的节的 Info\n"
"  makeinfo --no-split foo.texi          输出单个 Info 文件而不论大小\n"

#: makeinfo/makeinfo.c:622
#, c-format
msgid "%s: Ignoring unrecognized TEXINFO_OUTPUT_FORMAT value `%s'.\n"
msgstr "%s: 忽略不可辨认的 TEXINFO_OUTPUT_FORMAT 值“%s”。\n"

#: makeinfo/makeinfo.c:670 makeinfo/makeinfo.c:696 makeinfo/makeinfo.c:720
#: makeinfo/makeinfo.c:780
#, c-format
msgid "%s: %s arg must be numeric, not `%s'.\n"
msgstr "%s：%s 参数必须为数值，而不是“%s”。\n"

#: makeinfo/makeinfo.c:683
#, c-format
msgid "%s: could not open macro expansion output `%s'"
msgstr "%s: 无法打开宏扩展输出“%s”"

#: makeinfo/makeinfo.c:688
#, c-format
msgid "%s: ignoring second macro expansion output `%s'.\n"
msgstr "%s: 无法打开宏扩展输出“%s”\n"

#: makeinfo/makeinfo.c:733
#, c-format
msgid "%s: could not open internal links output `%s'"
msgstr "%s: 无法打开宏扩展输出“%s”"

#: makeinfo/makeinfo.c:738
#, c-format
msgid "%s: ignoring second internal links output `%s'.\n"
msgstr "%s: 忽略二次内部连接输出“%s”。\n"

#: makeinfo/makeinfo.c:751
#, c-format
msgid "%s: --paragraph-indent arg must be numeric/`none'/`asis', not `%s'.\n"
msgstr "%s：--paragraph-indent 的参数必须为数值/“none”/“asis”，而不是“%s”。\n"

#: makeinfo/makeinfo.c:769
#, c-format
msgid "%s: --footnote-style arg must be `separate' or `end', not `%s'.\n"
msgstr "%s：--footnote-style 的参数必须为“separate”或“end”，而不是“%s”。\n"

#: makeinfo/makeinfo.c:844
#, c-format
msgid "%s: missing file argument.\n"
msgstr "%s：遗漏文件参数。\n"

#: makeinfo/makeinfo.c:1041 makeinfo/makeinfo.c:4166
#, c-format
msgid "Multiline command %c%s used improperly"
msgstr "使用了不合适的多行命令 %c%s"

#: makeinfo/makeinfo.c:1044
#, c-format
msgid "Expected `%s'"
msgstr "应为“%s”"

#: makeinfo/makeinfo.c:1521
#, c-format
msgid "Can't create directory `%s': %s"
msgstr "无法创建目录“%s”：%s"

#: makeinfo/makeinfo.c:1567
#, c-format
msgid "No `%s' found in `%s'"
msgstr "在“%2$s”中找不到“%1$s”"

#: makeinfo/makeinfo.c:1647
#, c-format
msgid "%s: Skipping macro expansion to stdout as Info output is going there.\n"
msgstr "%s: 跳过展开至标准输出的宏，由于 Info 的输出要使用标准输出。\n"

#: makeinfo/makeinfo.c:1677
#, c-format
msgid "Making %s file `%s' from `%s'.\n"
msgstr "从“%3$s”创建 %1$s 文件“%2$s”。\n"

#: makeinfo/makeinfo.c:1744
#, c-format
msgid ""
"%s: Removing macro output file `%s' due to errors; use --force to preserve.\n"
msgstr "%s：由于错误删除宏输出文件“%s”；用 --force 保留宏输出。\n"

#: makeinfo/makeinfo.c:1799
#, c-format
msgid "%s: Removing output file `%s' due to errors; use --force to preserve.\n"
msgstr "%s：由于错误删除宏输出文件“%s”；用 --force 保留宏输出。\n"

#: makeinfo/makeinfo.c:1818
#, c-format
msgid ""
"%s: Removing internal links output file `%s' due to errors; use --force to "
"preserve.\n"
msgstr "%s：由于错误删除内部连接输出文件“%s”；用 --force 保留。\n"

#: makeinfo/makeinfo.c:2113
#, c-format
msgid "Unknown command `%s'"
msgstr "未知的命令“%s”"

#: makeinfo/makeinfo.c:2135
#, c-format
msgid "Use braces to give a command as an argument to @%s"
msgstr "使用花括号将一个命令用作 @%s 的参数"

#: makeinfo/makeinfo.c:2394
#, c-format
msgid "%c%s expected braces"
msgstr "%c%s 需要花括号"

#: makeinfo/makeinfo.c:2407
msgid "Unmatched }"
msgstr "不匹配的 }"

#: makeinfo/makeinfo.c:2455
msgid "NO_NAME!"
msgstr "无名字！"

#: makeinfo/makeinfo.c:2476
#, c-format
msgid "%c%s missing close brace"
msgstr "%c%s 遗漏闭合花括号"

#: makeinfo/makeinfo.c:3482
#, c-format
msgid "@image file `%s' (for HTML) not readable: %s"
msgstr "@image 文件“%s”(对 HTML)不可读：%s"

#: makeinfo/makeinfo.c:3488
#, c-format
msgid "No such file `%s'"
msgstr "没有那样的文件“%s”"

#: makeinfo/makeinfo.c:3624
#, c-format
msgid "@image file `%s' (for text) unreadable: %s"
msgstr "@image 文件“%s”(对文本)不可读：%s"

#: makeinfo/makeinfo.c:3633
msgid "@image missing filename argument"
msgstr "@image 遗漏文件名参数"

#: makeinfo/makeinfo.c:3851
#, c-format
msgid "undefined flag: %s"
msgstr "未定义的标识: %s"

#: makeinfo/makeinfo.c:3852
#, c-format
msgid "{No value for `%s'}"
msgstr "{没有“%s”的值}"

#: makeinfo/makeinfo.c:3904
#, c-format
msgid "%c%s requires a name"
msgstr "%c%s 需要一个名字"

#: makeinfo/makeinfo.c:4010
#, c-format
msgid "Reached eof before matching @end %s"
msgstr "文件在遇到匹配的 @end %s 前就结束了"

#: makeinfo/makeinfo.c:4258
#, c-format
msgid "`%.40s...' is too long for expansion; not expanded"
msgstr "“%.40s...”扩展起来太长；未扩展"

#: makeinfo/multi.c:116
msgid "Missing } in @multitable template"
msgstr "@multitable 模板中遗漏了 }"

#: makeinfo/multi.c:260
#, c-format
msgid "ignoring stray text `%s' after @multitable"
msgstr "忽略 @multitable 之后的过剩文本“%s”"

#: makeinfo/multi.c:400
#, c-format
msgid "Too many columns in multitable item (max %d)"
msgstr "在多列表格项目中含有太多的列 (最大为 %d)"

#: makeinfo/multi.c:563
#, c-format
msgid "[unexpected] cannot select column #%d in multitable"
msgstr "[未预料到的错误] 无法在多列表格中选择第 #%d 列"

#: makeinfo/multi.c:592
msgid "ignoring @tab outside of multitable"
msgstr "忽略多列表格外的 @tab"

#: makeinfo/multi.c:640
#, c-format
msgid "** Multicolumn output from last row:\n"
msgstr "** 最后一行的多列输出：\n"

#: makeinfo/multi.c:643
#, c-format
msgid "* column #%d: output = %s\n"
msgstr "* 列 #%d：输出 = %s\n"

#: makeinfo/node.c:279
#, c-format
msgid "Node `%s' previously defined at line %d"
msgstr "节点“%s”在前面的(第 %d 行)定义"

#: makeinfo/node.c:647
#, c-format
msgid "Formatting node %s...\n"
msgstr "正在格式化节点 %s...\n"

#: makeinfo/node.c:714
#, c-format
msgid "Node `%s' requires a sectioning command (e.g., %c%s)"
msgstr "节点“%s”需要一个段落命令 (例如：%c%s)"

#: makeinfo/node.c:878
#, c-format
msgid "No node name specified for `%c%s' command"
msgstr "没有为“%c%s”命令指定节名称"

#: makeinfo/node.c:919 makeinfo/node.c:1163
#, c-format
msgid "Anchor `%s' and node `%s' map to the same file name"
msgstr "Anchor“%s”和节点“%s”映射到同一个文件名"

#: makeinfo/node.c:922
msgid "This @anchor command ignored; references to it will not work"
msgstr "忽略该 @anchor 命令；对它的引用将无法工作"

#: makeinfo/node.c:924 makeinfo/node.c:1166
msgid "Rename this anchor or use the `--no-split' option"
msgstr "重命名 anchor 或使用“--no-split”选项"

#: makeinfo/node.c:954
#, c-format
msgid "Unexpected string at end of split-HTML file `%s'"
msgstr "在分立 HTML 文件“%s”的末尾的意外字符串"

#: makeinfo/node.c:1160
#, c-format
msgid "Anchors `%s' and `%s' map to the same file name"
msgstr "Anchor“%s”和“%s”映射到同一个文件名"

#: makeinfo/node.c:1165
msgid "@anchor command ignored; references to it will not work"
msgstr "忽略 @anchor 命令；对它的引用将不能工作"

#: makeinfo/node.c:1362
#, c-format
msgid "%s reference to nonexistent node `%s' (perhaps incorrect sectioning?)"
msgstr "%s 引用到不存在的节点“%s”(也许字段不正确？)"

#: makeinfo/node.c:1462
#, c-format
msgid "Next field of node `%s' not pointed to (perhaps incorrect sectioning?)"
msgstr "节点“%s”的下一个域没有指向(也许字段不正确？)"

#: makeinfo/node.c:1465
#, c-format
msgid "This node (%s) has the bad Prev"
msgstr "该节点 (%s) 含有错误的上一个"

#: makeinfo/node.c:1520
#, c-format
msgid "Prev field of node `%s' not pointed to"
msgstr "节点“%s”的上一个域没有指向"

#: makeinfo/node.c:1524
#, c-format
msgid "This node (%s) has the bad Next"
msgstr "该节点 (%s) 含有错误的下一个"

#: makeinfo/node.c:1536
#, c-format
msgid "`%s' has no Up field (perhaps incorrect sectioning?)"
msgstr "“%s”无 Up 字段(也许字段不正确？)"

#: makeinfo/node.c:1605
#, c-format
msgid "Node `%s' lacks menu item for `%s' despite being its Up target"
msgstr "尽管节点“%s”是“%s”的上层节点，但缺少相关的菜单项"

#: makeinfo/node.c:1637
#, c-format
msgid "unreferenced node `%s'"
msgstr "未引用的节点“%s”"

#: makeinfo/node.c:1727
#, c-format
msgid "Removing %s\n"
msgstr "删除 %s\n"

#: makeinfo/node.c:1731
#, c-format
msgid "Can't remove file `%s': %s"
msgstr "无法删除文件“%s”：%s"

#: makeinfo/sectioning.c:122
#, c-format
msgid "Appendix %c"
msgstr "附录 %c "

#: makeinfo/sectioning.c:467
#, c-format
msgid "Internal error (search_sectioning) `%s'!"
msgstr "内部错误 (search_sectioning) “%s”！"

#: makeinfo/sectioning.c:563
#, c-format
msgid "Internal error (search_sectioning) \"%s\"!"
msgstr "内部错误 (search_sectioning) “%s”！"

#: makeinfo/sectioning.c:624
#, c-format
msgid "%c%s is obsolete; use %c%s instead"
msgstr "%c%s 已过时；用 %c%s 代替"

#: makeinfo/sectioning.c:640
#, c-format
msgid "Node with %ctop as a section already exists"
msgstr "带有 %ctop 的节点作为一个节已经存在"

#: makeinfo/sectioning.c:648
#, c-format
msgid "Here is the %ctop node"
msgstr "这里是 %ctop 节点"

#: makeinfo/sectioning.c:664
#, c-format
msgid "%ctop used before %cnode, defaulting to %s"
msgstr "%ctop 在 %cnode 之前使用，默认为 %s"

#: makeinfo/xml.c:1669
#, c-format
msgid "@image file `%s' unreadable: %s"
msgstr "@image 文件“%s”不可读：%s"

#: makeinfo/xml.c:2014
msgid ""
"@headitem as the last item of @multitable produces invalid Docbook documents"
msgstr "作为 @multitable 的最后一个项目，@headitem 生成无效的 Docbook 文档"

#: makeinfo/xml.c:2150
#, fuzzy
msgid "of"
msgstr "的"

#: makeinfo/xml.c:2155
#, fuzzy
msgid "on"
msgstr "关于"

#: makeinfo/xref.c:127
msgid "First argument to cross-reference may not be empty"
msgstr "交叉引用的第一个参数不能为空"

#: makeinfo/xref.c:252
#, c-format
msgid "Empty file name for HTML cross reference in `%s'"
msgstr "为“%s”中的 HTML 交叉引用清空文件名"

#: makeinfo/xref.c:387
msgid "End of file reached while looking for `.' or `,'"
msgstr "查找“。”或“，”时遇到了文件结尾"

#: makeinfo/xref.c:390
#, c-format
msgid "`.' or `,' must follow @%s, not `%c'"
msgstr "“.”或“,”之后必须为 @%s，而不是“%c”"

#: makeinfo/xref.c:392
msgid "for cross-references in parentheses, use @pxref"
msgstr "要使用括号中的交叉引用，请使用 @pxref"

#: makeinfo/xref.c:435
msgid "First argument to @inforef may not be empty"
msgstr "@inforef 的第一个参数不能为空"

#: util/texindex.c:223
msgid "display this help and exit"
msgstr "显示该求助信息并退出"

#: util/texindex.c:225
msgid "send output to FILE"
msgstr "将输出送入 FILE"

#: util/texindex.c:227
msgid "display version information and exit"
msgstr "显示版本信息并退出"

#: util/texindex.c:237
#, c-format
msgid "Usage: %s [OPTION]... FILE...\n"
msgstr "用法：%s [选项]... 文件...\n"

#: util/texindex.c:238
#, c-format
msgid "Generate a sorted index for each TeX output FILE.\n"
msgstr "为每个 TeX 输出文件生成排序的索引。\n"

#: util/texindex.c:241
#, c-format
msgid "Usually FILE... is specified as `foo.%c%c' for a document `foo.texi'.\n"
msgstr "对于文档“foo.texi”，FILE... 通常为“foo.%c%c”的形式。\n"

#: util/texindex.c:243
#, c-format
msgid ""
"\n"
"Options:\n"
msgstr ""
"\n"
"选项：\n"

#: util/texindex.c:743
#, c-format
msgid "failure reopening %s"
msgstr "重新打开 %s 失败"

#: util/texindex.c:758 util/texindex.c:786
#, c-format
msgid "%s: not a texinfo index file"
msgstr "%s：不是 texinfo 索引文件"

#: util/texindex.c:993
#, c-format
msgid "No page number in %s"
msgstr "%s 中没有页码"

#: util/texindex.c:1066
#, c-format
msgid "entry %s follows an entry with a secondary name"
msgstr "条目 %s 出现在具有次要名称的条目之后"

#~ msgid ""
#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
#~ "There is NO warranty.  You may redistribute this software\n"
#~ "under the terms of the GNU General Public License.\n"
#~ "For more information about these matters, see the files named COPYING.\n"
#~ msgstr ""
#~ "版权所有 (C) %s 自由软件基金会。\n"
#~ "本软件没有任何担保。您可以按照通用\n"
#~ "公共许可证(GPL)的条款发行本软件。\n"
#~ "这方面的详情，请阅读名为 COPYING 的文件。\n"

#~ msgid ""
#~ "Usage: %s [OPTION]... [MENU-ITEM...]\n"
#~ "\n"
#~ "Read documentation in Info format.\n"
#~ "\n"
#~ "Options:\n"
#~ "      --apropos=STRING         look up STRING in all indices of all "
#~ "manuals.\n"
#~ "  -d, --directory=DIR          add DIR to INFOPATH.\n"
#~ "      --dribble=FILENAME       remember user keystrokes in FILENAME.\n"
#~ "  -f, --file=FILENAME          specify Info file to visit.\n"
#~ "  -h, --help                   display this help and exit.\n"
#~ "      --index-search=STRING    go to node pointed by index entry STRING.\n"
#~ "  -n, --node=NODENAME          specify nodes in first visited Info file.\n"
#~ "  -o, --output=FILENAME        output selected nodes to FILENAME.\n"
#~ "  -R, --raw-escapes            don't remove ANSI escapes from man pages.\n"
#~ "      --restore=FILENAME       read initial keystrokes from FILENAME.\n"
#~ "  -O, --show-options, --usage  go to command-line options node.\n"
#~ "%s      --subnodes               recursively output menu items.\n"
#~ "      --vi-keys                use vi-like and less-like key bindings.\n"
#~ "      --version                display version information and exit.\n"
#~ "\n"
#~ "The first non-option argument, if present, is the menu entry to start "
#~ "from;\n"
#~ "it is searched for in all `dir' files along INFOPATH.\n"
#~ "If it is not present, info merges all `dir' files and shows the result.\n"
#~ "Any remaining arguments are treated as the names of menu\n"
#~ "items relative to the initial node visited.\n"
#~ "\n"
#~ "Examples:\n"
#~ "  info                       show top-level dir menu\n"
#~ "  info emacs                 start at emacs node from top-level dir\n"
#~ "  info emacs buffers         start at buffers node within emacs manual\n"
#~ "  info --show-options emacs  start at node with emacs' command line "
#~ "options\n"
#~ "  info -f ./foo.info         show file ./foo.info, not searching dir\n"
#~ msgstr ""
#~ "用法：%s [选项]... [菜单项...]\n"
#~ "\n"
#~ "阅读 Info 格式的文档。\n"
#~ "\n"
#~ "选项：\n"
#~ "      --apropos=STRING         在所有手册的所有索引中搜索 STRING。\n"
#~ "  -d, --directory=DIR          将目录 DIR 添加到 INFOPATH 中。\n"
#~ "      --dribble=FILENAME       将用户的按键条目在文件 FILENAME 中。\n"
#~ "  -f, --file=FILENAME          指定要阅读的 Info 文件。\n"
#~ "  -h, --help                   显示该求助信息并退出。\n"
#~ "      --index-search=STRING    转移到索引条目 STRING 所指向的节点。\n"
#~ "  -n, --node=NODENAME          指定首先阅读的 Info 文件中的节点。\n"
#~ "  -o, --output=FILENAME        将选中的节点输出到文件 FILENAME 中。\n"
#~ "  -R, --raw-escapes            不要删除来自 man 页面的 ANSI 转义符。\n"
#~ "      --restore=FILENAME       从文件 FILENAME 中读取初始按键。\n"
#~ "  -O, --show-options, --usage  转移到命令行选项节点。\n"
#~ "%s      --subnodes               递归输出菜单条目。\n"
#~ "      --vi-keys                使用类 vi 和类 less 的按键绑定。\n"
#~ "      --version                显示版本信息并退出。\n"
#~ "\n"
#~ "如果存在非选项参数，则第一个非选项参数就是起点菜单条目；\n"
#~ "它是从 INFOPATH 中的“dir”文件中搜索而得的。\n"
#~ "如果搜索不到，info 就合并所有的“dir”文件并显示合并结果。\n"
#~ "所有剩余的参数均作为相对于阅读的初始节点的菜单项目名称。\n"
#~ "\n"
#~ "示例：\n"
#~ "  info                       显示顶层目录菜单\n"
#~ "  info emacs                 从顶层目录中的 emacs 节点开始\n"
#~ "  info emacs buffers         从 emacs 手册的 buffers 节点开始\n"
#~ "  info --show-options emacs  从 emacs 的命令行选项节点开始\n"
#~ "  info -f ./foo.info         显示文件 ./foo.info，而不是搜索目录\n"

#~ msgid ""
#~ "\\%-10[move-to-prev-xref]  Skip to previous hypertext link within this "
#~ "node.\n"
#~ msgstr "\\%-10[move-to-prev-xref]  跳转到本节点中的上一个超文本连接。\n"

#~ msgid ""
#~ "\\%-10[dir-node]  Move to the `directory' node.  Equivalent to `\\[goto-"
#~ "node] (DIR)'.\n"
#~ msgstr ""
#~ "\\%-10[dir-node]  移动到“directory”节点。等价于“\\[goto-node] (DIR)”。\n"

#~ msgid ""
#~ "\\%-10[top-node]  Move to the Top node.  Equivalent to `\\[goto-node] "
#~ "Top'.\n"
#~ msgstr "\\%-10[top-node]  移动到顶层节点。等价于“\\[goto-node] Top”。\n"

#~ msgid "\\%-10[scroll-forward]  Scroll forward 1 line.\n"
#~ msgstr "\\%-10[scroll-forward]  向前滚动一行。\n"

#~ msgid "\\%-10[scroll-backward]  Scroll backward 1 line.\n"
#~ msgstr "\\%-10[scroll-backward]  向后滚动一行。\n"

#~ msgid "\\%-10[menu-digit]  Pick first ... ninth item in node's menu.\n"
#~ msgstr "\\%-10[menu-digit]  选取节点菜单中的第一至第九个项目。\n"

#~ msgid ""
#~ "\\%-10[search-backward]  Search backward for a specified string\n"
#~ "              and select the node in which the previous occurrence is "
#~ "found.\n"
#~ msgstr ""
#~ "\\%-10[search-backward]  向后搜索指定的字符串\n"
#~ "              并选择所找到的上一个实例所在的节点。\n"

#~ msgid ""
#~ "              Picking a menu item causes another node to be selected.\n"
#~ msgstr "              选取一个菜单项目将选中另一个节点。\n"

#~ msgid ""
#~ "  %-10s  Search for a specified string in the index entries of this Info\n"
#~ msgstr "  %-10s  在本 Info 文件中的索引条目中搜索指定的字符串，\n"

#~ msgid ""
#~ "              file, and select the node referenced by the first entry "
#~ "found.\n"
#~ msgstr "              并选择第一个找到的条目所引用的节点。\n"

#~ msgid ""
#~ "              You may include a filename as well, as in (FILENAME)"
#~ "NODENAME.\n"
#~ msgstr "              您还可以同时给出文件名，形式为 (文件名)节点名。\n"

#~ msgid ""
#~ "              and select the node in which the next occurrence is found.\n"
#~ msgstr "              并选择找到的下一个实例所在的节点。\n"

#~ msgid "  %-10s  Search backward for a specified string\n"
#~ msgstr "  %-10s  向后搜索指定的字符串\n"

#~ msgid "--- Use `\\[history-node]' or `\\[kill-node]' to exit ---\n"
#~ msgstr "--- 用“\\[history-node]”或“\\[kill-node]”退出 ---\n"

#~ msgid "Following Next node..."
#~ msgstr "跟随下一个节点..."

#~ msgid "Selecting first menu item..."
#~ msgstr "选择第一个菜单项..."

#~ msgid "Selecting Next node..."
#~ msgstr "选择下一个节点..."

#~ msgid "Moving Up %d time(s), then Next."
#~ msgstr "向上移动 %d 次，而后后移。"

#~ msgid "Moving Prev in this window."
#~ msgstr "在本窗口中向上移动。"

#~ msgid "Moving Up in this window."
#~ msgstr "在本窗口中向上层移动"

#~ msgid "Moving to `Prev's last menu item."
#~ msgstr "移动到前一个的最后一个菜单项目。"

#~ msgid " "
#~ msgstr " "

#~ msgid "\"\" is invalid"
#~ msgstr "“”为非法"

#~ msgid "Function"
#~ msgstr "函数"

#~ msgid "Macro"
#~ msgstr "宏"

#~ msgid "Special Form"
#~ msgstr "特殊形式"

#~ msgid "Variable"
#~ msgstr "变量"

#~ msgid "User Option"
#~ msgstr "用户选项"

#~ msgid "Instance Variable"
#~ msgstr "实例变量"

#~ msgid "Method"
#~ msgstr "方法"

#~ msgid "Untitled"
#~ msgstr "无标题"

#~ msgid "%s is an invalid ISO code, using %c"
#~ msgstr "%s 是非法的 ISO 码，使用 %c"

#~ msgid "@quote-arg only useful for single-argument macros"
#~ msgstr "@quote-arg 只对单参数宏有用"

#~ msgid "Cannot specify more than one macro expansion output"
#~ msgstr "无法指定多个宏扩展输出"

#~ msgid "File exists, but is not a directory"
#~ msgstr "文件存在，但不是目录"

#~ msgid "This is %s, produced by makeinfo version %s from %s.\n"
#~ msgstr "这是 %s，由 makeinfo 版本 %s 从 %s 生成。\n"

#~ msgid "see "
#~ msgstr "参阅 "

#~ msgid "No `%s.png' or `.jpg', and no extension supplied"
#~ msgstr "不是“%s.png”或“.jpg”，而且没有给出扩展名"

#~ msgid "Node:"
#~ msgstr "节点："

#~ msgid "Next:"
#~ msgstr "下一个："

#~ msgid "Previous:"
#~ msgstr "上一个："

#~ msgid "Up:"
#~ msgstr "上层："

#~ msgid "Menu"
#~ msgstr "菜单"

#~ msgid "Cross"
#~ msgstr "交叉引用"

#~ msgid "Prev"
#~ msgstr "上一个"

#~ msgid "`%s' has no Up field"
#~ msgstr "“%s”没有上层域"

#~ msgid "Up"
#~ msgstr "上层"

#~ msgid "node `%s' has been referenced %d times"
#~ msgstr "节点“%s”已被引用了 %d 次"

#~ msgid "Table of Contents"
#~ msgstr "目录"

#~ msgid "Short Contents"
#~ msgstr "简短目录"

#~ msgid "%s: TOC should be here, but it was not found"
#~ msgstr "%s：目录应该在这里，但它并未出现"

#~ msgid ""
#~ "Usage: %s [OPTION]... [INFO-FILE [DIR-FILE]]\n"
#~ "\n"
#~ "Install or delete dir entries from INFO-FILE in the Info directory file\n"
#~ "DIR-FILE.\n"
#~ "\n"
#~ "Options:\n"
#~ " --delete          delete existing entries for INFO-FILE from DIR-FILE;\n"
#~ "                     don't insert any new entries.\n"
#~ " --dir-file=NAME   specify file name of Info directory file.\n"
#~ "                     This is equivalent to using the DIR-FILE argument.\n"
#~ " --entry=TEXT      insert TEXT as an Info directory entry.\n"
#~ "                     TEXT should have the form of an Info menu item line\n"
#~ "                     plus zero or more extra lines starting with "
#~ "whitespace.\n"
#~ "                     If you specify more than one entry, they are all "
#~ "added.\n"
#~ "                     If you don't specify any entries, they are "
#~ "determined\n"
#~ "                     from information in the Info file itself.\n"
#~ " --help            display this help and exit.\n"
#~ " --info-file=FILE  specify Info file to install in the directory.\n"
#~ "                     This is equivalent to using the INFO-FILE argument.\n"
#~ " --info-dir=DIR    same as --dir-file=DIR/dir.\n"
#~ " --item=TEXT       same as --entry TEXT.\n"
#~ "                     An Info directory entry is actually a menu item.\n"
#~ " --quiet           suppress warnings.\n"
#~ " --remove          same as --delete.\n"
#~ " --section=SEC     put this file's entries in section SEC of the "
#~ "directory.\n"
#~ "                     If you specify more than one section, all the "
#~ "entries\n"
#~ "                     are added in each of the sections.\n"
#~ "                     If you don't specify any sections, they are "
#~ "determined\n"
#~ "                     from information in the Info file itself.\n"
#~ " --version         display version information and exit.\n"
#~ msgstr ""
#~ "用法：%s [选项]... [INFO-文件 [DIR-文件]]\n"
#~ "\n"
#~ "将 INFO-文件中的目录条目安装到 Info 目录文件 DIR-文件中，或从中\n"
#~ "删除。\n"
#~ "\n"
#~ "选项：\n"
#~ " --delete          从 DIR-文件中删除关于 INFO-文件的现有条目；\n"
#~ "                     不删除任何新条目。\n"
#~ " --dir-file=NAME   指定 Info 目录文件的文件名。\n"
#~ "                     这等价于使用 DIR-文件参数。\n"
#~ " --entry=TEXT      将 TEXT 作为 Info 目录条目插入。\n"
#~ "                     TEXT 的形式应该是 Info 菜单项目\n"
#~ "                     行以及零个或多个以空白开头的行。\n"
#~ "                     如果您指明多个条目，将全部添加。\n"
#~ "                     如果您未指明任何条目，它们将从\n"
#~ "                     Info 文件自身的信息来判断。\n"
#~ " --help            显示本求助信息并退出。\n"
#~ " --info-file=FILE  指定要安装到目录中的 Info 文件。\n"
#~ "                     这等价于使用 INFO-文件参数。\n"
#~ " --info-dir=DIR    等同于 --dir-file=DIR/dir。\n"
#~ " --item=TEXT       等同于 --entry 文本。\n"
#~ "                     Info 目录条目实际上是菜单项目。\n"
#~ " --quiet           不要输出警告。\n"
#~ " --remove          等同于 --delete。\n"
#~ " --section=SEC     将该文件的条目存储到目录的节 SEC 中。\n"
#~ "                     如果您指明多于一个节，将加入各个\n"
#~ "                     节中的所有条目。\n"
#~ "                     如果您未指明任何节，将根据 Info\n"
#~ "                     文件自身的信息来判断它们。\n"
#~ " --version         显示版本信息并退出。\n"

#~ msgid "%s: Specify the Info directory only once.\n"
#~ msgstr "%s：Info 目录只应该指定一次。\n"

#~ msgid "menu item `%s' already exists, for file `%s'"
#~ msgstr "在文件“%2$s”中菜单项“%1$s”已存在"

#~ msgid "keep temporary files around after processing"
#~ msgstr "在处理之后保留临时文件"

#~ msgid "do not keep temporary files around after processing (default)"
#~ msgstr "在处理之后删除临时文件 (默认)"

#~ msgid "%s; for file `%s'.\n"
#~ msgstr "%s；文件“%s”。\n"
