This is a port of GNU diffutils 3.3 to MSDOS/DJGPP.

  This package contains the GNU diff, diff3, sdiff, and cmp utilities.
  Their features are a superset of the Unix features and they are significantly
  faster.

1.:     DJGPP specific changes.
        =======================

      - The port will honor the DOS environment variables TMP and TEMP if
        TMPDIR is not set or not accessible.
      - The port will select at run time the pattern to be used when temp
        file name are created.  If LFN support is available then the standard
        pattern, this is "sdiffXXXXXX" will be used.  IF only SFN support is
        available then "dfXXXXXX" will be used.
      - This port will strip the extension from argv[0].


        All the changes done to the original distribution are documented in the
        diffs file and located together with all the files needed to configure
        the package (config.bat, config.sed, config.site, etc.) in the /djgpp
        directory.  There exist a /ms subdir that contains files to configure
        and build the package.  This is part of the original FSF diffutils
        source distribution. I have never inspected nor used those files, so I
        will not be able answer questions if you decide to use it.

        This port no longer supports neither DJGPP 2.03 nor DJGPP 2.04.  This
        port has been configured using DJGPP 2.05.  It has been configured to
        be build in the "_build.205" directory.

        The port has been configured and compiled on WinXP SP3.  There is no
        guarantee that this may be possible with any other DOS-like OS.  Due
        to the use of long file names it will not be possible to configure and
        compile without LFN support.

        The DJGPP 2.05 version of the port has been compiled using gcc510 and
        bnu225br2.

        As usual, all djgpp specific files (config.bat, diffs, README files,
        etc.) are located in the /djgpp directory.

        For further information about GNU diffutils please read the info docs and NEWS file.


2.:     Installing the binary package.
        ==============================

2.1.:   Copy the binary distribution into the top DJGPP installation directory
        and unzip it running one of the following commands:
          unzip32 dif33br3.zip      or
          djtarx dif33br3.zip       or
          pkunzip -d dif33br3.zip

2.2.:   If there is no entry for the gzip info docs in your dir file, located
        info directory, create one running the command:
          install-info --info-dir=/dev/env/DJDIR/info /dev/env/DJDIR/info/diffutils.info


3.:     Building the binaries from sources.
        ===================================

3.1.:   Create a temporary directory and copy the source package into the
        directory.  If you download the source distribution from one of the
        DJGPP sites, just unzip it preserving the directory structure
        running *ONE* of the following commands:
          unzip32 dif33sr3.zip      or
          djtarx dif33sr3.zip       or
          pkunzip -d dif33sr3.zip

3.2.:   To build the binaries you will need the following binary packages:
          djdev205.zip (or a later but NOT a prior version)
          bsh205bbr3.zip (or a later but NOT a prior version)
          gccNNNb.zip, gppNNN.zip, bnuNNNb.zip, makNNNb.zip, filNNNb.zip,
          shlNNNb.zip, txtNNNb.zip, txiNNNb.zip, grepNNNb.zip, sedNNNb.zip,
          mktmpNNb.zip and gwkNNNb.zip.

        If you want to configure and compile this packages with NLS support
        enabled you must install licvNNNb.zip, lunsNNNb.zip and gtxNNNNb.zip.

        If you want to run the check you will need also:
          difNNNb.zip and mktmpNNNb.zip

        NNN represents the latest version number of the binary packages.  All
        this packages can be found in the /v2gnu directory of any
        ftp.delorie.com mirror.
        You will need bsh205bbr3.zip or later and *NOT* a prior version or
        the build will fail.  The same applies to djdev205.zip.

3.3.:   The package has been configured for DJGPP 2.05.  There is a separate
        build directory under the top srcdir (aka diffutils-3.3).  To build
        the binaries cd into _build.205 directory.  If for some reason you want
        to reconfigure the package cd into the build directory and run the
        following commands:
          del config.cache
          make clean
          ..\djgpp\config ./..

        Please note that you *MUST* delete the config.cache file in the /djgpp
        directory or you will not really reconfigure the sources because the
        configuration informations will be read from the cache file instead
        of being newly computed.

        config.bat, among other things, will start the configure script passing
        to it a couple of arguments.  You can control these argument passing the
        following command line arguments to config.bat:
          nls or no-nls, default no-nls.  No NLS support.
          cache or no-cache, default cache.
          dep or no-dep, default no-dep.  No dependency tracking.
          silent or no-silent, default silent.  Controls the verbosity of the
                                                build process.
        All other configure specific options are not set by config.bat so their
        values are left as they are.  If no arguments are passed to config.bat
        then the default values are used.


        To build the programs in a directory other than where the sources are,
        you must add the parameter that specifies the source directory,
        e.g:
          x:\src\gnu\diffutils-3.3\djgpp\config x:/src/gnu/diffutils-3.3

        Lets assume you want to build the binaries in a directory placed on a
        different drive (z:\build in this case) from where the sources are,
        then you will run the following commands:
          z:
          md \build
          cd \build
          x:\src\gnu\diffutils-3.3\djgpp\config x:/src/gnu/diffutils-3.3

        The order of the options and the srcdir option does not matter.  You
        *MUST* use forward slashes to specify the source directory.

        The batch file will set same environment variables, make MSDOS specific
        modifications to the Makefile.in's and supply all other needed options
        to the configure script.

3.4.:   To compile the package run from the directory where you have configured
        the sources the command:
          make

3.5.:   Now you can run the tests if you like.  From the top srcdir run the
        command:
          make check

        No test should fail.

3.6.:   To install the binaries, and info docs run the following command from
        the top srcdir:
          make install

        This will install the products into your DJGPP installation tree given
        by the default prefix "/dev/env/DJDIR".  If you prefer to install them
        into some other directory you will have to set prefix to the appropriate
        value:
          make install prefix=z:/some/other/place



        Send GNU diffutils specific bug reports to <bug-diffutils@gnu.org>.
        Send suggestions and bug reports concerning the DJGPP port to
        comp.os.msdos.djgpp or <djgpp@delorie.com>.

Enjoy.

          Guerrero, Juan Manuel <juan.guerrero@gmx.de>
