This is doc/gnat_rm.info, produced by makeinfo version 4.7 from
/gnu/gcc-4.12/gcc/ada/gnat_rm.texi.

INFO-DIR-SECTION GNU Ada tools
START-INFO-DIR-ENTRY
* GNAT Reference Manual: (gnat_rm).  Reference Manual for GNU Ada tools.
END-INFO-DIR-ENTRY

   Copyright (C) 1995-2004, Free Software Foundation

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.2 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "GNU Free Documentation License", with the
Front-Cover Texts being "GNAT Reference Manual", and with no Back-Cover
Texts. A copy of the license is included in the section entitled "GNU
Free Documentation License".


File: gnat_rm.info,  Node: Top,  Next: About This Guide,  Prev: (dir),  Up: (dir)

GNAT Reference Manual
*********************

GNAT Reference Manual

GNAT, The GNU Ada 95 Compiler
GCC version 4.1.2
AdaCore

* Menu:

* About This Guide::
* Implementation Defined Pragmas::
* Implementation Defined Attributes::
* Implementation Advice::
* Implementation Defined Characteristics::
* Intrinsic Subprograms::
* Representation Clauses and Pragmas::
* Standard Library Routines::
* The Implementation of Standard I/O::
* The GNAT Library::
* Interfacing to Other Languages::
* Specialized Needs Annexes::
* Implementation of Specific Ada Features::
* Project File Reference::
* Obsolescent Features::
* GNU Free Documentation License::
* Index::

 --- The Detailed Node Listing ---

About This Guide

* What This Reference Manual Contains::
* Related Information::

Implementation Defined Pragmas

* Pragma Abort_Defer::
* Pragma Ada_83::
* Pragma Ada_95::
* Pragma Ada_05::
* Pragma Annotate::
* Pragma Assert::
* Pragma Ast_Entry::
* Pragma C_Pass_By_Copy::
* Pragma Comment::
* Pragma Common_Object::
* Pragma Compile_Time_Warning::
* Pragma Complex_Representation::
* Pragma Component_Alignment::
* Pragma Convention_Identifier::
* Pragma CPP_Class::
* Pragma CPP_Constructor::
* Pragma CPP_Virtual::
* Pragma CPP_Vtable::
* Pragma Debug::
* Pragma Debug_Policy::
* Pragma Detect_Blocking::
* Pragma Elaboration_Checks::
* Pragma Eliminate::
* Pragma Export_Exception::
* Pragma Export_Function::
* Pragma Export_Object::
* Pragma Export_Procedure::
* Pragma Export_Value::
* Pragma Export_Valued_Procedure::
* Pragma Extend_System::
* Pragma External::
* Pragma External_Name_Casing::
* Pragma Finalize_Storage_Only::
* Pragma Float_Representation::
* Pragma Ident::
* Pragma Import_Exception::
* Pragma Import_Function::
* Pragma Import_Object::
* Pragma Import_Procedure::
* Pragma Import_Valued_Procedure::
* Pragma Initialize_Scalars::
* Pragma Inline_Always::
* Pragma Inline_Generic::
* Pragma Interface::
* Pragma Interface_Name::
* Pragma Interrupt_Handler::
* Pragma Interrupt_State::
* Pragma Keep_Names::
* Pragma License::
* Pragma Link_With::
* Pragma Linker_Alias::
* Pragma Linker_Constructor::
* Pragma Linker_Destructor::
* Pragma Linker_Section::
* Pragma Long_Float::
* Pragma Machine_Attribute::
* Pragma Main_Storage::
* Pragma No_Return::
* Pragma No_Strict_Aliasing ::
* Pragma Normalize_Scalars::
* Pragma Obsolescent::
* Pragma Passive::
* Pragma Persistent_BSS::
* Pragma Polling::
* Pragma Profile (Ravenscar)::
* Pragma Profile (Restricted)::
* Pragma Propagate_Exceptions::
* Pragma Psect_Object::
* Pragma Pure_Function::
* Pragma Restriction_Warnings::
* Pragma Source_File_Name::
* Pragma Source_File_Name_Project::
* Pragma Source_Reference::
* Pragma Stream_Convert::
* Pragma Style_Checks::
* Pragma Subtitle::
* Pragma Suppress_All::
* Pragma Suppress_Exception_Locations::
* Pragma Suppress_Initialization::
* Pragma Task_Info::
* Pragma Task_Name::
* Pragma Task_Storage::
* Pragma Thread_Body::
* Pragma Time_Slice::
* Pragma Title::
* Pragma Unchecked_Union::
* Pragma Unimplemented_Unit::
* Pragma Universal_Data::
* Pragma Unreferenced::
* Pragma Unreserve_All_Interrupts::
* Pragma Unsuppress::
* Pragma Use_VADS_Size::
* Pragma Validity_Checks::
* Pragma Volatile::
* Pragma Warnings::
* Pragma Weak_External::

Implementation Defined Attributes

* Abort_Signal::
* Address_Size::
* Asm_Input::
* Asm_Output::
* AST_Entry::
* Bit::
* Bit_Position::
* Code_Address::
* Default_Bit_Order::
* Elaborated::
* Elab_Body::
* Elab_Spec::
* Emax::
* Enum_Rep::
* Epsilon::
* Fixed_Value::
* Has_Access_Values::
* Has_Discriminants::
* Img::
* Integer_Value::
* Large::
* Machine_Size::
* Mantissa::
* Max_Interrupt_Priority::
* Max_Priority::
* Maximum_Alignment::
* Mechanism_Code::
* Null_Parameter::
* Object_Size::
* Passed_By_Reference::
* Range_Length::
* Safe_Emax::
* Safe_Large::
* Small::
* Storage_Unit::
* Target_Name::
* Tick::
* To_Address::
* Type_Class::
* UET_Address::
* Unconstrained_Array::
* Universal_Literal_String::
* Unrestricted_Access::
* VADS_Size::
* Value_Size::
* Wchar_T_Size::
* Word_Size::

The Implementation of Standard I/O

* Standard I/O Packages::
* FORM Strings::
* Direct_IO::
* Sequential_IO::
* Text_IO::
* Wide_Text_IO::
* Wide_Wide_Text_IO::
* Stream_IO::
* Shared Files::
* Open Modes::
* Operations on C Streams::
* Interfacing to C Streams::

The GNAT Library

* Ada.Characters.Latin_9 (a-chlat9.ads)::
* Ada.Characters.Wide_Latin_1 (a-cwila1.ads)::
* Ada.Characters.Wide_Latin_9 (a-cwila9.ads)::
* Ada.Characters.Wide_Wide_Latin_1 (a-czila1.ads)::
* Ada.Characters.Wide_Wide_Latin_9 (a-czila9.ads)::
* Ada.Command_Line.Remove (a-colire.ads)::
* Ada.Command_Line.Environment (a-colien.ads)::
* Ada.Direct_IO.C_Streams (a-diocst.ads)::
* Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads)::
* Ada.Exceptions.Traceback (a-exctra.ads)::
* Ada.Sequential_IO.C_Streams (a-siocst.ads)::
* Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads)::
* Ada.Strings.Unbounded.Text_IO (a-suteio.ads)::
* Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads)::
* Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads)::
* Ada.Text_IO.C_Streams (a-tiocst.ads)::
* Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads)::
* Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads)::
* GNAT.Array_Split (g-arrspl.ads)::
* GNAT.AWK (g-awk.ads)::
* GNAT.Bounded_Buffers (g-boubuf.ads)::
* GNAT.Bounded_Mailboxes (g-boumai.ads)::
* GNAT.Bubble_Sort (g-bubsor.ads)::
* GNAT.Bubble_Sort_A (g-busora.ads)::
* GNAT.Bubble_Sort_G (g-busorg.ads)::
* GNAT.Calendar (g-calend.ads)::
* GNAT.Calendar.Time_IO (g-catiio.ads)::
* GNAT.Case_Util (g-casuti.ads)::
* GNAT.CGI (g-cgi.ads)::
* GNAT.CGI.Cookie (g-cgicoo.ads)::
* GNAT.CGI.Debug (g-cgideb.ads)::
* GNAT.Command_Line (g-comlin.ads)::
* GNAT.Compiler_Version (g-comver.ads)::
* GNAT.Ctrl_C (g-ctrl_c.ads)::
* GNAT.CRC32 (g-crc32.ads)::
* GNAT.Current_Exception (g-curexc.ads)::
* GNAT.Debug_Pools (g-debpoo.ads)::
* GNAT.Debug_Utilities (g-debuti.ads)::
* GNAT.Directory_Operations (g-dirope.ads)::
* GNAT.Dynamic_HTables (g-dynhta.ads)::
* GNAT.Dynamic_Tables (g-dyntab.ads)::
* GNAT.Exception_Actions (g-excact.ads)::
* GNAT.Exception_Traces (g-exctra.ads)::
* GNAT.Exceptions (g-except.ads)::
* GNAT.Expect (g-expect.ads)::
* GNAT.Float_Control (g-flocon.ads)::
* GNAT.Heap_Sort (g-heasor.ads)::
* GNAT.Heap_Sort_A (g-hesora.ads)::
* GNAT.Heap_Sort_G (g-hesorg.ads)::
* GNAT.HTable (g-htable.ads)::
* GNAT.IO (g-io.ads)::
* GNAT.IO_Aux (g-io_aux.ads)::
* GNAT.Lock_Files (g-locfil.ads)::
* GNAT.MD5 (g-md5.ads)::
* GNAT.Memory_Dump (g-memdum.ads)::
* GNAT.Most_Recent_Exception (g-moreex.ads)::
* GNAT.OS_Lib (g-os_lib.ads)::
* GNAT.Perfect_Hash_Generators (g-pehage.ads)::
* GNAT.Regexp (g-regexp.ads)::
* GNAT.Registry (g-regist.ads)::
* GNAT.Regpat (g-regpat.ads)::
* GNAT.Secondary_Stack_Info (g-sestin.ads)::
* GNAT.Semaphores (g-semaph.ads)::
* GNAT.Signals (g-signal.ads)::
* GNAT.Sockets (g-socket.ads)::
* GNAT.Source_Info (g-souinf.ads)::
* GNAT.Spell_Checker (g-speche.ads)::
* GNAT.Spitbol.Patterns (g-spipat.ads)::
* GNAT.Spitbol (g-spitbo.ads)::
* GNAT.Spitbol.Table_Boolean (g-sptabo.ads)::
* GNAT.Spitbol.Table_Integer (g-sptain.ads)::
* GNAT.Spitbol.Table_VString (g-sptavs.ads)::
* GNAT.Strings (g-string.ads)::
* GNAT.String_Split (g-strspl.ads)::
* GNAT.Table (g-table.ads)::
* GNAT.Task_Lock (g-tasloc.ads)::
* GNAT.Threads (g-thread.ads)::
* GNAT.Traceback (g-traceb.ads)::
* GNAT.Traceback.Symbolic (g-trasym.ads)::
* GNAT.Wide_String_Split (g-wistsp.ads)::
* GNAT.Wide_Wide_String_Split (g-zistsp.ads)::
* Interfaces.C.Extensions (i-cexten.ads)::
* Interfaces.C.Streams (i-cstrea.ads)::
* Interfaces.CPP (i-cpp.ads)::
* Interfaces.Os2lib (i-os2lib.ads)::
* Interfaces.Os2lib.Errors (i-os2err.ads)::
* Interfaces.Os2lib.Synchronization (i-os2syn.ads)::
* Interfaces.Os2lib.Threads (i-os2thr.ads)::
* Interfaces.Packed_Decimal (i-pacdec.ads)::
* Interfaces.VxWorks (i-vxwork.ads)::
* Interfaces.VxWorks.IO (i-vxwoio.ads)::
* System.Address_Image (s-addima.ads)::
* System.Assertions (s-assert.ads)::
* System.Memory (s-memory.ads)::
* System.Partition_Interface (s-parint.ads)::
* System.Restrictions (s-restri.ads)::
* System.Rident (s-rident.ads)::
* System.Task_Info (s-tasinf.ads)::
* System.Wch_Cnv (s-wchcnv.ads)::
* System.Wch_Con (s-wchcon.ads)::

Text_IO

* Text_IO Stream Pointer Positioning::
* Text_IO Reading and Writing Non-Regular Files::
* Get_Immediate::
* Treating Text_IO Files as Streams::
* Text_IO Extensions::
* Text_IO Facilities for Unbounded Strings::

Wide_Text_IO

* Wide_Text_IO Stream Pointer Positioning::
* Wide_Text_IO Reading and Writing Non-Regular Files::

Wide_Wide_Text_IO

* Wide_Wide_Text_IO Stream Pointer Positioning::
* Wide_Wide_Text_IO Reading and Writing Non-Regular Files::

Interfacing to Other Languages

* Interfacing to C::
* Interfacing to C++::
* Interfacing to COBOL::
* Interfacing to Fortran::
* Interfacing to non-GNAT Ada code::

Specialized Needs Annexes

Implementation of Specific Ada Features
* Machine Code Insertions::
* GNAT Implementation of Tasking::
* GNAT Implementation of Shared Passive Packages::
* Code Generation for Array Aggregates::
* The Size of Discriminated Records with Default Discriminants::
* Strict Conformance to the Ada 95 Reference Manual::

Project File Reference

Obsolescent Features

GNU Free Documentation License

Index


File: gnat_rm.info,  Node: About This Guide,  Next: Implementation Defined Pragmas,  Prev: Top,  Up: Top

About This Guide
****************

This manual contains useful information in writing programs using the
GNAT compiler.  It includes information on implementation dependent
characteristics of GNAT, including all the information required by Annex
M of the standard.

Ada 95 is designed to be highly portable.  In general, a program will
have the same effect even when compiled by different compilers on
different platforms.  However, since Ada 95 is designed to be used in a
wide variety of applications, it also contains a number of system
dependent features to be used in interfacing to the external world.  

   Note: Any program that makes use of implementation-dependent features
may be non-portable.  You should follow good programming practice and
isolate and clearly document any sections of your program that make use
of these features in a non-portable manner.

* Menu:

* What This Reference Manual Contains::
* Conventions::
* Related Information::


File: gnat_rm.info,  Node: What This Reference Manual Contains,  Next: Conventions,  Up: About This Guide

What This Reference Manual Contains
===================================

This reference manual contains the following chapters:

   * *Note Implementation Defined Pragmas::, lists GNAT
     implementation-dependent pragmas, which can be used to extend and
     enhance the functionality of the compiler.

   * *Note Implementation Defined Attributes::, lists GNAT
     implementation-dependent attributes which can be used to extend and
     enhance the functionality of the compiler.

   * *Note Implementation Advice::, provides information on generally
     desirable behavior which are not requirements that all compilers
     must follow since it cannot be provided on all systems, or which
     may be undesirable on some systems.

   * *Note Implementation Defined Characteristics::, provides a guide to
     minimizing implementation dependent features.

   * *Note Intrinsic Subprograms::, describes the intrinsic subprograms
     implemented by GNAT, and how they can be imported into user
     application programs.

   * *Note Representation Clauses and Pragmas::, describes in detail the
     way that GNAT represents data, and in particular the exact set of
     representation clauses and pragmas that is accepted.

   * *Note Standard Library Routines::, provides a listing of packages
     and a brief description of the functionality that is provided by
     Ada's extensive set of standard library routines as implemented by
     GNAT.

   * *Note The Implementation of Standard I/O::, details how the GNAT
     implementation of the input-output facilities.

   * *Note The GNAT Library::, is a catalog of packages that complement
     the Ada predefined library.

   * *Note Interfacing to Other Languages::, describes how programs
     written in Ada using GNAT can be interfaced to other programming
     languages.

     *Note Specialized Needs Annexes::, describes the GNAT
     implementation of all of the specialized needs annexes.

   * *Note Implementation of Specific Ada Features::, discusses issues
     related to GNAT's implementation of machine code insertions,
     tasking, and several other features.

   * *Note Project File Reference::, presents the syntax and semantics
     of project files.

   * *Note Obsolescent Features:: documents implementation dependent
     features, including pragmas and attributes, which are considered
     obsolescent, since there are other preferred ways of achieving the
     same results. These obsolescent forms are retained for backwards
     compatibility.


This reference manual assumes that you are familiar with Ada 95
language, as described in the International Standard
ANSI/ISO/IEC-8652:1995, Jan 1995.


File: gnat_rm.info,  Node: Conventions,  Next: Related Information,  Prev: What This Reference Manual Contains,  Up: About This Guide

Conventions
===========

Following are examples of the typographical and graphic conventions used
in this guide:

   * `Functions', `utility program names', `standard names', and
     `classes'.

   * `Option flags'

   * `File Names', `button names', and `field names'.

   * `Variables'.

   * _Emphasis_.

   * [optional information or parameters]

   * Examples are described by text
          and then shown this way.

Commands that are entered by the user are preceded in this manual by the
characters `$ ' (dollar sign followed by space).  If your system uses
this sequence as a prompt, then the commands will appear exactly as you
see them in the manual.  If your system uses some other prompt, then
the command will appear with the `$' replaced by whatever prompt
character you are using.


File: gnat_rm.info,  Node: Related Information,  Prev: Conventions,  Up: About This Guide

Related Information
===================

See the following documents for further information on GNAT:

   * `GNAT User's Guide', which provides information on how to use the
     GNAT compiler system.

   * `Ada 95 Reference Manual', which contains all reference material
     for the Ada 95 programming language.

   * `Ada 95 Annotated Reference Manual', which is an annotated version
     of the standard reference manual cited above.  The annotations
     describe detailed aspects of the design decision, and in
     particular contain useful sections on Ada 83 compatibility.

   * `DEC Ada, Technical Overview and Comparison on DIGITAL Platforms',
     which contains specific information on compatibility between GNAT
     and DEC Ada 83 systems.

   * `DEC Ada, Language Reference Manual, part number AA-PYZAB-TK' which
     describes in detail the pragmas and attributes provided by the DEC
     Ada 83 compiler system.



File: gnat_rm.info,  Node: Implementation Defined Pragmas,  Next: Implementation Defined Attributes,  Prev: About This Guide,  Up: Top

1 Implementation Defined Pragmas
********************************

Ada 95 defines a set of pragmas that can be used to supply additional
information to the compiler.  These language defined pragmas are
implemented in GNAT and work as described in the Ada 95 Reference
Manual.

   In addition, Ada 95 allows implementations to define additional
pragmas whose meaning is defined by the implementation.  GNAT provides
a number of these implementation-dependent pragmas which can be used to
extend and enhance the functionality of the compiler.  This section of
the GNAT Reference Manual describes these additional pragmas.

   Note that any program using these pragmas may not be portable to
other compilers (although GNAT implements this set of pragmas on all
platforms).  Therefore if portability to other compilers is an important
consideration, the use of these pragmas should be minimized.

* Menu:

* Pragma Abort_Defer::
* Pragma Ada_83::
* Pragma Ada_95::
* Pragma Ada_05::
* Pragma Annotate::
* Pragma Assert::
* Pragma Ast_Entry::
* Pragma C_Pass_By_Copy::
* Pragma Comment::
* Pragma Common_Object::
* Pragma Compile_Time_Warning::
* Pragma Complex_Representation::
* Pragma Component_Alignment::
* Pragma Convention_Identifier::
* Pragma CPP_Class::
* Pragma CPP_Constructor::
* Pragma CPP_Virtual::
* Pragma CPP_Vtable::
* Pragma Debug::
* Pragma Debug_Policy::
* Pragma Detect_Blocking::
* Pragma Elaboration_Checks::
* Pragma Eliminate::
* Pragma Export_Exception::
* Pragma Export_Function::
* Pragma Export_Object::
* Pragma Export_Procedure::
* Pragma Export_Value::
* Pragma Export_Valued_Procedure::
* Pragma Extend_System::
* Pragma External::
* Pragma External_Name_Casing::
* Pragma Finalize_Storage_Only::
* Pragma Float_Representation::
* Pragma Ident::
* Pragma Import_Exception::
* Pragma Import_Function::
* Pragma Import_Object::
* Pragma Import_Procedure::
* Pragma Import_Valued_Procedure::
* Pragma Initialize_Scalars::
* Pragma Inline_Always::
* Pragma Inline_Generic::
* Pragma Interface::
* Pragma Interface_Name::
* Pragma Interrupt_Handler::
* Pragma Interrupt_State::
* Pragma Keep_Names::
* Pragma License::
* Pragma Link_With::
* Pragma Linker_Alias::
* Pragma Linker_Constructor::
* Pragma Linker_Destructor::
* Pragma Linker_Section::
* Pragma Long_Float::
* Pragma Machine_Attribute::
* Pragma Main_Storage::
* Pragma No_Return::
* Pragma No_Strict_Aliasing::
* Pragma Normalize_Scalars::
* Pragma Obsolescent::
* Pragma Passive::
* Pragma Persistent_BSS::
* Pragma Polling::
* Pragma Profile (Ravenscar)::
* Pragma Profile (Restricted)::
* Pragma Propagate_Exceptions::
* Pragma Psect_Object::
* Pragma Pure_Function::
* Pragma Restriction_Warnings::
* Pragma Source_File_Name::
* Pragma Source_File_Name_Project::
* Pragma Source_Reference::
* Pragma Stream_Convert::
* Pragma Style_Checks::
* Pragma Subtitle::
* Pragma Suppress_All::
* Pragma Suppress_Exception_Locations::
* Pragma Suppress_Initialization::
* Pragma Task_Info::
* Pragma Task_Name::
* Pragma Task_Storage::
* Pragma Thread_Body::
* Pragma Time_Slice::
* Pragma Title::
* Pragma Unchecked_Union::
* Pragma Unimplemented_Unit::
* Pragma Universal_Data::
* Pragma Unreferenced::
* Pragma Unreserve_All_Interrupts::
* Pragma Unsuppress::
* Pragma Use_VADS_Size::
* Pragma Validity_Checks::
* Pragma Volatile::
* Pragma Warnings::
* Pragma Weak_External::


File: gnat_rm.info,  Node: Pragma Abort_Defer,  Next: Pragma Ada_83,  Up: Implementation Defined Pragmas

Pragma Abort_Defer
==================

Syntax:
     pragma Abort_Defer;

This pragma must appear at the start of the statement sequence of a
handled sequence of statements (right after the `begin').  It has the
effect of deferring aborts for the sequence of statements (but not for
the declarations or handlers, if any, associated with this statement
sequence).


File: gnat_rm.info,  Node: Pragma Ada_83,  Next: Pragma Ada_95,  Prev: Pragma Abort_Defer,  Up: Implementation Defined Pragmas

Pragma Ada_83
=============

Syntax:
     pragma Ada_83;

A configuration pragma that establishes Ada 83 mode for the unit to
which it applies, regardless of the mode set by the command line
switches.  In Ada 83 mode, GNAT attempts to be as compatible with the
syntax and semantics of Ada 83, as defined in the original Ada 83
Reference Manual as possible.  In particular, the new Ada 95 keywords
are not recognized, optional package bodies are allowed, and generics
may name types with unknown discriminants without using the `(<>)'
notation.  In addition, some but not all of the additional restrictions
of Ada 83 are enforced.

   Ada 83 mode is intended for two purposes.  Firstly, it allows
existing legacy Ada 83 code to be compiled and adapted to GNAT with
less effort.  Secondly, it aids in keeping code backwards compatible
with Ada 83.  However, there is no guarantee that code that is
processed correctly by GNAT in Ada 83 mode will in fact compile and
execute with an Ada 83 compiler, since GNAT does not enforce all the
additional checks required by Ada 83.


File: gnat_rm.info,  Node: Pragma Ada_95,  Next: Pragma Ada_05,  Prev: Pragma Ada_83,  Up: Implementation Defined Pragmas

Pragma Ada_95
=============

Syntax:
     pragma Ada_95;

A configuration pragma that establishes Ada 95 mode for the unit to
which it applies, regardless of the mode set by the command line
switches.  This mode is set automatically for the `Ada' and `System'
packages and their children, so you need not specify it in these
contexts.  This pragma is useful when writing a reusable component that
itself uses Ada 95 features, but which is intended to be usable from
either Ada 83 or Ada 95 programs.


File: gnat_rm.info,  Node: Pragma Ada_05,  Next: Pragma Annotate,  Prev: Pragma Ada_95,  Up: Implementation Defined Pragmas

Pragma Ada_05
=============

Syntax:
     pragma Ada_05;

A configuration pragma that establishes Ada 2005 mode for the unit to
which it applies, regardless of the mode set by the command line
switches.  This mode is set automatically for the `Ada' and `System'
packages and their children, so you need not specify it in these
contexts.  This pragma is useful when writing a reusable component that
itself uses Ada 2005 features, but which is intended to be usable from
either Ada 83 or Ada 95 programs.


File: gnat_rm.info,  Node: Pragma Annotate,  Next: Pragma Assert,  Prev: Pragma Ada_05,  Up: Implementation Defined Pragmas

Pragma Annotate
===============

Syntax:
     pragma Annotate (IDENTIFIER {, ARG});

     ARG ::= NAME | EXPRESSION

This pragma is used to annotate programs.  IDENTIFIER identifies the
type of annotation.  GNAT verifies this is an identifier, but does not
otherwise analyze it.  The ARG argument can be either a string literal
or an expression.  String literals are assumed to be of type
`Standard.String'.  Names of entities are simply analyzed as entity
names.  All other expressions are analyzed as expressions, and must be
unambiguous.

   The analyzed pragma is retained in the tree, but not otherwise
processed by any part of the GNAT compiler.  This pragma is intended
for use by external tools, including ASIS.


File: gnat_rm.info,  Node: Pragma Assert,  Next: Pragma Ast_Entry,  Prev: Pragma Annotate,  Up: Implementation Defined Pragmas

Pragma Assert
=============

Syntax:
     pragma Assert (
       boolean_EXPRESSION
       [, static_string_EXPRESSION]);

The effect of this pragma depends on whether the corresponding command
line switch is set to activate assertions.  The pragma expands into code
equivalent to the following:

     if assertions-enabled then
        if not boolean_EXPRESSION then
           System.Assertions.Raise_Assert_Failure
             (string_EXPRESSION);
        end if;
     end if;

The string argument, if given, is the message that will be associated
with the exception occurrence if the exception is raised.  If no second
argument is given, the default message is `FILE:NNN', where FILE is the
name of the source file containing the assert, and NNN is the line
number of the assert.  A pragma is not a statement, so if a statement
sequence contains nothing but a pragma assert, then a null statement is
required in addition, as in:

     ...
     if J > 3 then
        pragma Assert (K > 3, "Bad value for K");
        null;
     end if;

Note that, as with the `if' statement to which it is equivalent, the
type of the expression is either `Standard.Boolean', or any type derived
from this standard type.

   If assertions are disabled (switch `-gnata' not used), then there is
no effect (and in particular, any side effects from the expression are
suppressed).  More precisely it is not quite true that the pragma has
no effect, since the expression is analyzed, and may cause types to be
frozen if they are mentioned here for the first time.

   If assertions are enabled, then the given expression is tested, and
if it is `False' then `System.Assertions.Raise_Assert_Failure' is called
which results in the raising of `Assert_Failure' with the given message.

   If the boolean expression has side effects, these side effects will
turn on and off with the setting of the assertions mode, resulting in
assertions that have an effect on the program.  You should generally
avoid side effects in the expression arguments of this pragma.  However,
the expressions are analyzed for semantic correctness whether or not
assertions are enabled, so turning assertions on and off cannot affect
the legality of a program.


File: gnat_rm.info,  Node: Pragma Ast_Entry,  Next: Pragma C_Pass_By_Copy,  Prev: Pragma Assert,  Up: Implementation Defined Pragmas

Pragma Ast_Entry
================

Syntax:
     pragma AST_Entry (entry_IDENTIFIER);

This pragma is implemented only in the OpenVMS implementation of GNAT.
The argument is the simple name of a single entry; at most one
`AST_Entry' pragma is allowed for any given entry.  This pragma must be
used in conjunction with the `AST_Entry' attribute, and is only allowed
after the entry declaration and in the same task type specification or
single task as the entry to which it applies.  This pragma specifies
that the given entry may be used to handle an OpenVMS asynchronous
system trap (`AST') resulting from an OpenVMS system service call.  The
pragma does not affect normal use of the entry.  For further details on
this pragma, see the DEC Ada Language Reference Manual, section 9.12a.


File: gnat_rm.info,  Node: Pragma C_Pass_By_Copy,  Next: Pragma Comment,  Prev: Pragma Ast_Entry,  Up: Implementation Defined Pragmas

Pragma C_Pass_By_Copy
=====================

Syntax:
     pragma C_Pass_By_Copy
       ([Max_Size =>] static_integer_EXPRESSION);

Normally the default mechanism for passing C convention records to C
convention subprograms is to pass them by reference, as suggested by RM
B.3(69).  Use the configuration pragma `C_Pass_By_Copy' to change this
default, by requiring that record formal parameters be passed by copy
if all of the following conditions are met:

   * The size of the record type does not exceed
     STATIC_INTEGER_EXPRESSION.

   * The record type has `Convention C'.

   * The formal parameter has this record type, and the subprogram has a
     foreign (non-Ada) convention.

If these conditions are met the argument is passed by copy, i.e. in a
manner consistent with what C expects if the corresponding formal in the
C prototype is a struct (rather than a pointer to a struct).

   You can also pass records by copy by specifying the convention
`C_Pass_By_Copy' for the record type, or by using the extended `Import'
and `Export' pragmas, which allow specification of passing mechanisms
on a parameter by parameter basis.


File: gnat_rm.info,  Node: Pragma Comment,  Next: Pragma Common_Object,  Prev: Pragma C_Pass_By_Copy,  Up: Implementation Defined Pragmas

Pragma Comment
==============

Syntax:

     pragma Comment (static_string_EXPRESSION);

This is almost identical in effect to pragma `Ident'.  It allows the
placement of a comment into the object file and hence into the
executable file if the operating system permits such usage.  The
difference is that `Comment', unlike `Ident', has no limitations on
placement of the pragma (it can be placed anywhere in the main source
unit), and if more than one pragma is used, all comments are retained.


File: gnat_rm.info,  Node: Pragma Common_Object,  Next: Pragma Compile_Time_Warning,  Prev: Pragma Comment,  Up: Implementation Defined Pragmas

Pragma Common_Object
====================

Syntax:

     pragma Common_Object (
          [Internal =>] local_NAME,
       [, [External =>] EXTERNAL_SYMBOL]
       [, [Size     =>] EXTERNAL_SYMBOL] );

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

This pragma enables the shared use of variables stored in overlaid
linker areas corresponding to the use of `COMMON' in Fortran.  The
single object LOCAL_NAME is assigned to the area designated by the
EXTERNAL argument.  You may define a record to correspond to a series
of fields.  The SIZE argument is syntax checked in GNAT, but otherwise
ignored.

   `Common_Object' is not supported on all platforms.  If no support is
available, then the code generator will issue a message indicating that
the necessary attribute for implementation of this pragma is not
available.


File: gnat_rm.info,  Node: Pragma Compile_Time_Warning,  Next: Pragma Complex_Representation,  Prev: Pragma Common_Object,  Up: Implementation Defined Pragmas

Pragma Compile_Time_Warning
===========================

Syntax:

     pragma Compile_Time_Warning
              (boolean_EXPRESSION, static_string_EXPRESSION);

This pragma can be used to generate additional compile time warnings. It
is particularly useful in generics, where warnings can be issued for
specific problematic instantiations. The first parameter is a boolean
expression. The pragma is effective only if the value of this expression
is known at compile time, and has the value True. The set of expressions
whose values are known at compile time includes all static boolean
expressions, and also other values which the compiler can determine at
compile time (e.g. the size of a record type set by an explicit size
representation clause, or the value of a variable which was initialized
to a constant and is known not to have been modified).  If these
conditions are met, a warning message is generated using the value
given as the second argument. This string value may contain embedded
ASCII.LF characters to break the message into multiple lines.


File: gnat_rm.info,  Node: Pragma Complex_Representation,  Next: Pragma Component_Alignment,  Prev: Pragma Compile_Time_Warning,  Up: Implementation Defined Pragmas

Pragma Complex_Representation
=============================

Syntax:

     pragma Complex_Representation
             ([Entity =>] local_NAME);

The ENTITY argument must be the name of a record type which has two
fields of the same floating-point type.  The effect of this pragma is
to force gcc to use the special internal complex representation form for
this record, which may be more efficient.  Note that this may result in
the code for this type not conforming to standard ABI (application
binary interface) requirements for the handling of record types.  For
example, in some environments, there is a requirement for passing
records by pointer, and the use of this pragma may result in passing
this type in floating-point registers.


File: gnat_rm.info,  Node: Pragma Component_Alignment,  Next: Pragma Convention_Identifier,  Prev: Pragma Complex_Representation,  Up: Implementation Defined Pragmas

Pragma Component_Alignment
==========================

Syntax:

     pragma Component_Alignment (
          [Form =>] ALIGNMENT_CHOICE
       [, [Name =>] type_local_NAME]);

     ALIGNMENT_CHOICE ::=
       Component_Size
     | Component_Size_4
     | Storage_Unit
     | Default

Specifies the alignment of components in array or record types.  The
meaning of the FORM argument is as follows:

`Component_Size'
     Aligns scalar components and subcomponents of the array or record
     type on boundaries appropriate to their inherent size (naturally
     aligned).  For example, 1-byte components are aligned on byte
     boundaries, 2-byte integer components are aligned on 2-byte
     boundaries, 4-byte integer components are aligned on 4-byte
     boundaries and so on.  These alignment rules correspond to the
     normal rules for C compilers on all machines except the VAX.

`Component_Size_4'
     Naturally aligns components with a size of four or fewer bytes.
     Components that are larger than 4 bytes are placed on the next
     4-byte boundary.

`Storage_Unit'
     Specifies that array or record components are byte aligned, i.e.
     aligned on boundaries determined by the value of the constant
     `System.Storage_Unit'.

`Default'
     Specifies that array or record components are aligned on default
     boundaries, appropriate to the underlying hardware or operating
     system or both.  For OpenVMS VAX systems, the `Default' choice is
     the same as the `Storage_Unit' choice (byte alignment).  For all
     other systems, the `Default' choice is the same as
     `Component_Size' (natural alignment).

If the `Name' parameter is present, TYPE_LOCAL_NAME must refer to a
local record or array type, and the specified alignment choice applies
to the specified type.  The use of `Component_Alignment' together with
a pragma `Pack' causes the `Component_Alignment' pragma to be ignored.
The use of `Component_Alignment' together with a record representation
clause is only effective for fields not specified by the representation
clause.

   If the `Name' parameter is absent, the pragma can be used as either
a configuration pragma, in which case it applies to one or more units in
accordance with the normal rules for configuration pragmas, or it can be
used within a declarative part, in which case it applies to types that
are declared within this declarative part, or within any nested scope
within this declarative part.  In either case it specifies the alignment
to be applied to any record or array type which has otherwise standard
representation.

   If the alignment for a record or array type is not specified (using
pragma `Pack', pragma `Component_Alignment', or a record rep clause),
the GNAT uses the default alignment as described previously.


File: gnat_rm.info,  Node: Pragma Convention_Identifier,  Next: Pragma CPP_Class,  Prev: Pragma Component_Alignment,  Up: Implementation Defined Pragmas

Pragma Convention_Identifier
============================

Syntax:

     pragma Convention_Identifier (
              [Name =>]       IDENTIFIER,
              [Convention =>] convention_IDENTIFIER);

This pragma provides a mechanism for supplying synonyms for existing
convention identifiers. The `Name' identifier can subsequently be used
as a synonym for the given convention in other pragmas (including for
example pragma `Import' or another `Convention_Identifier' pragma). As
an example of the use of this, suppose you had legacy code which used
Fortran77 as the identifier for Fortran. Then the pragma:

     pragma Convention_Identifier (Fortran77, Fortran);

would allow the use of the convention identifier `Fortran77' in
subsequent code, avoiding the need to modify the sources. As another
example, you could use this to parametrize convention requirements
according to systems. Suppose you needed to use `Stdcall' on windows
systems, and `C' on some other system, then you could define a
convention identifier `Library' and use a single
`Convention_Identifier' pragma to specify which convention would be
used system-wide.


File: gnat_rm.info,  Node: Pragma CPP_Class,  Next: Pragma CPP_Constructor,  Prev: Pragma Convention_Identifier,  Up: Implementation Defined Pragmas

Pragma CPP_Class
================

Syntax:

     pragma CPP_Class ([Entity =>] local_NAME);

The argument denotes an entity in the current declarative region that
is declared as a tagged or untagged record type.  It indicates that the
type corresponds to an externally declared C++ class type, and is to be
laid out the same way that C++ would lay out the type.

   If (and only if) the type is tagged, at least one component in the
record must be of type `Interfaces.CPP.Vtable_Ptr', corresponding to
the C++ Vtable (or Vtables in the case of multiple inheritance) used
for dispatching.

   Types for which `CPP_Class' is specified do not have assignment or
equality operators defined (such operations can be imported or declared
as subprograms as required).  Initialization is allowed only by
constructor functions (see pragma `CPP_Constructor').

   Pragma `CPP_Class' is intended primarily for automatic generation
using an automatic binding generator tool.  See *Note Interfacing to
C++:: for related information.


File: gnat_rm.info,  Node: Pragma CPP_Constructor,  Next: Pragma CPP_Virtual,  Prev: Pragma CPP_Class,  Up: Implementation Defined Pragmas

Pragma CPP_Constructor
======================

Syntax:

     pragma CPP_Constructor ([Entity =>] local_NAME);

This pragma identifies an imported function (imported in the usual way
with pragma `Import') as corresponding to a C++ constructor.  The
argument is a name that must have been previously mentioned in a pragma
`Import' with `Convention' = `CPP', and must be of one of the following
forms:

   * `function FNAME return T'Class'

   * `function FNAME (...) return T'Class'

where T is a tagged type to which the pragma `CPP_Class' applies.

   The first form is the default constructor, used when an object of
type T is created on the Ada side with no explicit constructor.  Other
constructors (including the copy constructor, which is simply a special
case of the second form in which the one and only argument is of type
T), can only appear in two contexts:

   * On the right side of an initialization of an object of type T.

   * In an extension aggregate for an object of a type derived from T.

Although the constructor is described as a function that returns a value
on the Ada side, it is typically a procedure with an extra implicit
argument (the object being initialized) at the implementation level.
GNAT issues the appropriate call, whatever it is, to get the object
properly initialized.

   In the case of derived objects, you may use one of two possible forms
for declaring and creating an object:

   * `New_Object : Derived_T'

   * `New_Object : Derived_T := (CONSTRUCTOR-CALL WITH ...)'

In the first case the default constructor is called and extension fields
if any are initialized according to the default initialization
expressions in the Ada declaration.  In the second case, the given
constructor is called and the extension aggregate indicates the explicit
values of the extension fields.

   If no constructors are imported, it is impossible to create any
objects on the Ada side.  If no default constructor is imported, only
the initialization forms using an explicit call to a constructor are
permitted.

   Pragma `CPP_Constructor' is intended primarily for automatic
generation using an automatic binding generator tool.  See *Note
Interfacing to C++:: for more related information.


File: gnat_rm.info,  Node: Pragma CPP_Virtual,  Next: Pragma CPP_Vtable,  Prev: Pragma CPP_Constructor,  Up: Implementation Defined Pragmas

Pragma CPP_Virtual
==================

Syntax:

     pragma CPP_Virtual
          [Entity     =>] ENTITY,
       [, [Vtable_Ptr =>] vtable_ENTITY,]
       [, [Position   =>] static_integer_EXPRESSION]);

This pragma serves the same function as pragma `Import' in that case of
a virtual function imported from C++.  The ENTITY argument must be a
primitive subprogram of a tagged type to which pragma `CPP_Class'
applies.  The VTABLE_PTR argument specifies the Vtable_Ptr component
which contains the entry for this virtual function.  The POSITION
argument is the sequential number counting virtual functions for this
Vtable starting at 1.

   The `Vtable_Ptr' and `Position' arguments may be omitted if there is
one Vtable_Ptr present (single inheritance case) and all virtual
functions are imported.  In that case the compiler can deduce both
these values.

   No `External_Name' or `Link_Name' arguments are required for a
virtual function, since it is always accessed indirectly via the
appropriate Vtable entry.

   Pragma `CPP_Virtual' is intended primarily for automatic generation
using an automatic binding generator tool.  See *Note Interfacing to
C++:: for related information.


File: gnat_rm.info,  Node: Pragma CPP_Vtable,  Next: Pragma Debug,  Prev: Pragma CPP_Virtual,  Up: Implementation Defined Pragmas

Pragma CPP_Vtable
=================

Syntax:

     pragma CPP_Vtable (
       [Entity      =>] ENTITY,
       [Vtable_Ptr  =>] vtable_ENTITY,
       [Entry_Count =>] static_integer_EXPRESSION);

Given a record to which the pragma `CPP_Class' applies, this pragma can
be specified for each component of type `CPP.Interfaces.Vtable_Ptr'.
ENTITY is the tagged type, VTABLE_PTR is the record field of type
`Vtable_Ptr', and ENTRY_COUNT is the number of virtual functions on the
C++ side.  Not all of these functions need to be imported on the Ada
side.

   You may omit the `CPP_Vtable' pragma if there is only one
`Vtable_Ptr' component in the record and all virtual functions are
imported on the Ada side (the default value for the entry count in this
case is simply the total number of virtual functions).

   Pragma `CPP_Vtable' is intended primarily for automatic generation
using an automatic binding generator tool.  See *Note Interfacing to
C++:: for related information.


File: gnat_rm.info,  Node: Pragma Debug,  Next: Pragma Debug_Policy,  Prev: Pragma CPP_Vtable,  Up: Implementation Defined Pragmas

Pragma Debug
============

Syntax:

     pragma Debug (PROCEDURE_CALL_WITHOUT_SEMICOLON);

     PROCEDURE_CALL_WITHOUT_SEMICOLON ::=
       PROCEDURE_NAME
     | PROCEDURE_PREFIX ACTUAL_PARAMETER_PART

The argument has the syntactic form of an expression, meeting the
syntactic requirements for pragmas.

   If debug pragmas are not enabled, this pragma has no effect.  If
debug pragmas are enabled, the semantics of the pragma is exactly
equivalent to the procedure call statement corresponding to the argument
with a terminating semicolon.  Pragmas are permitted in sequences of
declarations, so you can use pragma `Debug' to intersperse calls to
debug procedures in the middle of declarations.  Debug pragmas can be
enabled either by use of the command line switch `-gnata' or by use of
the configuration pragma `Debug_Policy'.


File: gnat_rm.info,  Node: Pragma Debug_Policy,  Next: Pragma Detect_Blocking,  Prev: Pragma Debug,  Up: Implementation Defined Pragmas

Pragma Debug_Policy
===================

Syntax:

     pragma Debug_Policy (CHECK | IGNORE);

If the argument is `CHECK', then pragma `DEBUG' is enabled.  If the
argument is `IGNORE', then pragma `DEBUG' is ignored.  This pragma
overrides the effect of the `-gnata' switch on the command line.

   If debug pragmas are not enabled, this pragma has no effect.  If
debug pragmas are enabled, the semantics of the pragma is exactly
equivalent to the procedure call statement corresponding to the argument
with a terminating semicolon.  Pragmas are permitted in sequences of
declarations, so you can use pragma `Debug' to intersperse calls to
debug procedures in the middle of declarations.  Debug pragmas can be
enabled either by use of the command line switch `-gnata' or by use of
the configuration pragma `Debug_Policy'.


File: gnat_rm.info,  Node: Pragma Detect_Blocking,  Next: Pragma Elaboration_Checks,  Prev: Pragma Debug_Policy,  Up: Implementation Defined Pragmas

Pragma Detect_Blocking
======================

Syntax:

     pragma Detect_Blocking;

This is a configuration pragma that forces the detection of potentially
blocking operations within a protected operation, and to raise
Program_Error if that happens.


File: gnat_rm.info,  Node: Pragma Elaboration_Checks,  Next: Pragma Eliminate,  Prev: Pragma Detect_Blocking,  Up: Implementation Defined Pragmas

Pragma Elaboration_Checks
=========================

Syntax:

     pragma Elaboration_Checks (Dynamic | Static);

This is a configuration pragma that provides control over the
elaboration model used by the compilation affected by the pragma.  If
the parameter is `Dynamic', then the dynamic elaboration model
described in the Ada Reference Manual is used, as though the `-gnatE'
switch had been specified on the command line.  If the parameter is
`Static', then the default GNAT static model is used.  This
configuration pragma overrides the setting of the command line.  For
full details on the elaboration models used by the GNAT compiler, see
section "Elaboration Order Handling in GNAT" in the `GNAT User's Guide'.


File: gnat_rm.info,  Node: Pragma Eliminate,  Next: Pragma Export_Exception,  Prev: Pragma Elaboration_Checks,  Up: Implementation Defined Pragmas

Pragma Eliminate
================

Syntax:

     pragma Eliminate (
         [Unit_Name =>] IDENTIFIER |
                        SELECTED_COMPONENT);

     pragma Eliminate (
         [Unit_Name       =>]  IDENTIFIER |
                               SELECTED_COMPONENT,
         [Entity          =>]  IDENTIFIER |
                               SELECTED_COMPONENT |
                               STRING_LITERAL
         [,OVERLOADING_RESOLUTION]);

     OVERLOADING_RESOLUTION ::= PARAMETER_AND_RESULT_TYPE_PROFILE |
                                SOURCE_LOCATION

     PARAMETER_AND_RESULT_TYPE_PROFILE ::= PROCEDURE_PROFILE |
                                           FUNCTION_PROFILE

     PROCEDURE_PROFILE ::= Parameter_Types => PARAMETER_TYPES

     FUNCTION_PROFILE ::= [Parameter_Types => PARAMETER_TYPES,]
                           Result_Type => result_SUBTYPE_NAME]

     PARAMETER_TYPES ::= (SUBTYPE_NAME {, SUBTYPE_NAME})
     SUBTYPE_NAME    ::= STRING_VALUE

     SOURCE_LOCATION ::= Source_Location => SOURCE_TRACE
     SOURCE_TRACE    ::= STRING_VALUE

     STRING_VALUE ::= STRING_LITERAL {& STRING_LITERAL}

This pragma indicates that the given entity is not used outside the
compilation unit it is defined in. The entity must be an explicitly
declared subprogram; this includes  generic subprogram instances and
subprograms declared in generic package instances.

   If the entity to be eliminated is a library level subprogram, then
the first form of pragma `Eliminate' is used with only a single
argument.  In this form, the `Unit_Name' argument specifies the name of
the library  level unit to be eliminated.

   In all other cases, both `Unit_Name' and `Entity' arguments are
required. If item is an entity of a library package, then the first
argument specifies the unit name, and the second argument specifies the
particular entity.  If the second argument is in string form, it must
correspond to the internal manner in which GNAT stores entity names (see
compilation unit Namet in the compiler sources for details).

   The remaining parameters (OVERLOADING_RESOLUTION) are optionally used
to distinguish between overloaded subprograms. If a pragma does not
contain the OVERLOADING_RESOLUTION parameter(s), it is applied to all
the overloaded subprograms denoted by the first two parameters.

   Use PARAMETER_AND_RESULT_TYPE_PROFILE to specify the profile of the
subprogram to be eliminated in a manner similar to that used for the
extended `Import' and `Export' pragmas, except that the subtype names
are always given as strings. At the moment, this form of distinguishing
overloaded subprograms is implemented only partially, so we do not
recommend using it for practical subprogram elimination.

   Note, that in case of a parameterless procedure its profile is
represented as `Parameter_Types => ("")'

   Alternatively, the `Source_Location' parameter is used to specify
which overloaded alternative is to be eliminated by pointing to the
location of the DEFINING_PROGRAM_UNIT_NAME of this subprogram in the
source text. The string literal (or concatenation of string literals)
given as SOURCE_TRACE must have the following format:

     SOURCE_TRACE ::= SOURCE_LOCATION{LBRACKET SOURCE_LOCATION RBRACKET}

     LBRACKET ::= [
     RBRACKET ::= ]

     SOURCE_LOCATION ::= FILE_NAME:LINE_NUMBER
     FILE_NAME       ::= STRING_LITERAL
     LINE_NUMBER     ::= DIGIT {DIGIT}

   SOURCE_TRACE should be the short name of the source file (with no
directory information), and LINE_NUMBER is supposed to point to the
line where the defining name of the subprogram is located.

   For the subprograms that are not a part of generic instantiations,
only one SOURCE_LOCATION is used. If a subprogram is declared in a
package instantiation, SOURCE_TRACE contains two SOURCE_LOCATIONs, the
first one is the location of the (DEFINING_PROGRAM_UNIT_NAME of the)
instantiation, and the second one denotes the declaration of the
corresponding subprogram in the generic package. This approach is
recursively used to create SOURCE_LOCATIONs in case of nested
instantiations.

   The effect of the pragma is to allow the compiler to eliminate the
code or data associated with the named entity.  Any reference to an
eliminated entity outside the compilation unit it is defined in, causes
a compile time or link time error.

   The intention of pragma `Eliminate' is to allow a program to be
compiled in a system independent manner, with unused entities
eliminated, without the requirement of modifying the source text.
Normally the required set of `Eliminate' pragmas is constructed
automatically using the gnatelim tool. Elimination of unused entities
local to a compilation unit is automatic, without requiring the use of
pragma `Eliminate'.

   Note that the reason this pragma takes string literals where names
might be expected is that a pragma `Eliminate' can appear in a context
where the relevant names are not visible.

   Note that any change in the source files that includes removing,
splitting of adding lines may make the set of Eliminate pragmas using
SOURCE_LOCATION parameter illegal.


File: gnat_rm.info,  Node: Pragma Export_Exception,  Next: Pragma Export_Function,  Prev: Pragma Eliminate,  Up: Implementation Defined Pragmas

Pragma Export_Exception
=======================

Syntax:

     pragma Export_Exception (
          [Internal =>] local_NAME,
       [, [External =>] EXTERNAL_SYMBOL,]
       [, [Form     =>] Ada | VMS]
       [, [Code     =>] static_integer_EXPRESSION]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

This pragma is implemented only in the OpenVMS implementation of GNAT.
It causes the specified exception to be propagated outside of the Ada
program, so that it can be handled by programs written in other OpenVMS
languages.  This pragma establishes an external name for an Ada
exception and makes the name available to the OpenVMS Linker as a
global symbol.  For further details on this pragma, see the DEC Ada
Language Reference Manual, section 13.9a3.2.


File: gnat_rm.info,  Node: Pragma Export_Function,  Next: Pragma Export_Object,  Prev: Pragma Export_Exception,  Up: Implementation Defined Pragmas

Pragma Export_Function
======================

Syntax:

     pragma Export_Function (
          [Internal         =>] local_NAME,
       [, [External         =>] EXTERNAL_SYMBOL]
       [, [Parameter_Types  =>] PARAMETER_TYPES]
       [, [Result_Type      =>] result_SUBTYPE_MARK]
       [, [Mechanism        =>] MECHANISM]
       [, [Result_Mechanism =>] MECHANISM_NAME]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION
     | ""

     PARAMETER_TYPES ::=
       null
     | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

     TYPE_DESIGNATOR ::=
       subtype_NAME
     | subtype_Name ' Access

     MECHANISM ::=
       MECHANISM_NAME
     | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

     MECHANISM_ASSOCIATION ::=
       [formal_parameter_NAME =>] MECHANISM_NAME

     MECHANISM_NAME ::=
       Value
     | Reference

Use this pragma to make a function externally callable and optionally
provide information on mechanisms to be used for passing parameter and
result values.  We recommend, for the purposes of improving portability,
this pragma always be used in conjunction with a separate pragma
`Export', which must precede the pragma `Export_Function'.  GNAT does
not require a separate pragma `Export', but if none is present,
`Convention Ada' is assumed, which is usually not what is wanted, so it
is usually appropriate to use this pragma in conjunction with a
`Export' or `Convention' pragma that specifies the desired foreign
convention.  Pragma `Export_Function' (and `Export', if present) must
appear in the same declarative region as the function to which they
apply.

   INTERNAL_NAME must uniquely designate the function to which the
pragma applies.  If more than one function name exists of this name in
the declarative part you must use the `Parameter_Types' and
`Result_Type' parameters is mandatory to achieve the required unique
designation.  SUBTYPE_ MARKs in these parameters must exactly match the
subtypes in the corresponding function specification, using positional
notation to match parameters with subtype marks.  The form with an
`'Access' attribute can be used to match an anonymous access parameter.

   Note that passing by descriptor is not supported, even on the OpenVMS
ports of GNAT.

   Special treatment is given if the EXTERNAL is an explicit null
string or a static string expressions that evaluates to the null
string. In this case, no external name is generated. This form still
allows the specification of parameter mechanisms.


File: gnat_rm.info,  Node: Pragma Export_Object,  Next: Pragma Export_Procedure,  Prev: Pragma Export_Function,  Up: Implementation Defined Pragmas

Pragma Export_Object
====================

Syntax:

     pragma Export_Object
           [Internal =>] local_NAME,
        [, [External =>] EXTERNAL_SYMBOL]
        [, [Size     =>] EXTERNAL_SYMBOL]

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

This pragma designates an object as exported, and apart from the
extended rules for external symbols, is identical in effect to the use
of the normal `Export' pragma applied to an object.  You may use a
separate Export pragma (and you probably should from the point of view
of portability), but it is not required.  SIZE is syntax checked, but
otherwise ignored by GNAT.


File: gnat_rm.info,  Node: Pragma Export_Procedure,  Next: Pragma Export_Value,  Prev: Pragma Export_Object,  Up: Implementation Defined Pragmas

Pragma Export_Procedure
=======================

Syntax:

     pragma Export_Procedure (
          [Internal        =>] local_NAME
       [, [External        =>] EXTERNAL_SYMBOL]
       [, [Parameter_Types =>] PARAMETER_TYPES]
       [, [Mechanism       =>] MECHANISM]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION
     | ""

     PARAMETER_TYPES ::=
       null
     | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

     TYPE_DESIGNATOR ::=
       subtype_NAME
     | subtype_Name ' Access

     MECHANISM ::=
       MECHANISM_NAME
     | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

     MECHANISM_ASSOCIATION ::=
       [formal_parameter_NAME =>] MECHANISM_NAME

     MECHANISM_NAME ::=
       Value
     | Reference

This pragma is identical to `Export_Function' except that it applies to
a procedure rather than a function and the parameters `Result_Type' and
`Result_Mechanism' are not permitted.  GNAT does not require a separate
pragma `Export', but if none is present, `Convention Ada' is assumed,
which is usually not what is wanted, so it is usually appropriate to
use this pragma in conjunction with a `Export' or `Convention' pragma
that specifies the desired foreign convention.

   Note that passing by descriptor is not supported, even on the OpenVMS
ports of GNAT.

   Special treatment is given if the EXTERNAL is an explicit null
string or a static string expressions that evaluates to the null
string. In this case, no external name is generated. This form still
allows the specification of parameter mechanisms.


File: gnat_rm.info,  Node: Pragma Export_Value,  Next: Pragma Export_Valued_Procedure,  Prev: Pragma Export_Procedure,  Up: Implementation Defined Pragmas

Pragma Export_Value
===================

Syntax:

     pragma Export_Value (
       [Value     =>] static_integer_EXPRESSION,
       [Link_Name =>] static_string_EXPRESSION);

This pragma serves to export a static integer value for external use.
The first argument specifies the value to be exported. The Link_Name
argument specifies the symbolic name to be associated with the integer
value. This pragma is useful for defining a named static value in Ada
that can be referenced in assembly language units to be linked with the
application. This pragma is currently supported only for the AAMP
target and is ignored for other targets.


File: gnat_rm.info,  Node: Pragma Export_Valued_Procedure,  Next: Pragma Extend_System,  Prev: Pragma Export_Value,  Up: Implementation Defined Pragmas

Pragma Export_Valued_Procedure
==============================

Syntax:

     pragma Export_Valued_Procedure (
          [Internal        =>] local_NAME
       [, [External        =>] EXTERNAL_SYMBOL]
       [, [Parameter_Types =>] PARAMETER_TYPES]
       [, [Mechanism       =>] MECHANISM]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION
     | ""

     PARAMETER_TYPES ::=
       null
     | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

     TYPE_DESIGNATOR ::=
       subtype_NAME
     | subtype_Name ' Access

     MECHANISM ::=
       MECHANISM_NAME
     | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

     MECHANISM_ASSOCIATION ::=
       [formal_parameter_NAME =>] MECHANISM_NAME

     MECHANISM_NAME ::=
       Value
     | Reference

This pragma is identical to `Export_Procedure' except that the first
parameter of LOCAL_NAME, which must be present, must be of mode `OUT',
and externally the subprogram is treated as a function with this
parameter as the result of the function.  GNAT provides for this
capability to allow the use of `OUT' and `IN OUT' parameters in
interfacing to external functions (which are not permitted in Ada
functions).  GNAT does not require a separate pragma `Export', but if
none is present, `Convention Ada' is assumed, which is almost certainly
not what is wanted since the whole point of this pragma is to interface
with foreign language functions, so it is usually appropriate to use
this pragma in conjunction with a `Export' or `Convention' pragma that
specifies the desired foreign convention.

   Note that passing by descriptor is not supported, even on the OpenVMS
ports of GNAT.

   Special treatment is given if the EXTERNAL is an explicit null
string or a static string expressions that evaluates to the null
string. In this case, no external name is generated. This form still
allows the specification of parameter mechanisms.


File: gnat_rm.info,  Node: Pragma Extend_System,  Next: Pragma External,  Prev: Pragma Export_Valued_Procedure,  Up: Implementation Defined Pragmas

Pragma Extend_System
====================

Syntax:

     pragma Extend_System ([Name =>] IDENTIFIER);

This pragma is used to provide backwards compatibility with other
implementations that extend the facilities of package `System'.  In
GNAT, `System' contains only the definitions that are present in the
Ada 95 RM.  However, other implementations, notably the DEC Ada 83
implementation, provide many extensions to package `System'.

   For each such implementation accommodated by this pragma, GNAT
provides a package `Aux_XXX', e.g. `Aux_DEC' for the DEC Ada 83
implementation, which provides the required additional definitions.  You
can use this package in two ways.  You can `with' it in the normal way
and access entities either by selection or using a `use' clause.  In
this case no special processing is required.

   However, if existing code contains references such as `System.XXX'
where XXX is an entity in the extended definitions provided in package
`System', you may use this pragma to extend visibility in `System' in a
non-standard way that provides greater compatibility with the existing
code.  Pragma `Extend_System' is a configuration pragma whose single
argument is the name of the package containing the extended definition
(e.g. `Aux_DEC' for the DEC Ada case).  A unit compiled under control
of this pragma will be processed using special visibility processing
that looks in package `System.Aux_XXX' where `Aux_XXX' is the pragma
argument for any entity referenced in package `System', but not found
in package `System'.

   You can use this pragma either to access a predefined `System'
extension supplied with the compiler, for example `Aux_DEC' or you can
construct your own extension unit following the above definition.  Note
that such a package is a child of `System' and thus is considered part
of the implementation.  To compile it you will have to use the
appropriate switch for compiling system units.  See the GNAT User's
Guide for details.


File: gnat_rm.info,  Node: Pragma External,  Next: Pragma External_Name_Casing,  Prev: Pragma Extend_System,  Up: Implementation Defined Pragmas

Pragma External
===============

Syntax:

     pragma External (
       [   Convention    =>] convention_IDENTIFIER,
       [   Entity        =>] local_NAME
       [, [External_Name =>] static_string_EXPRESSION ]
       [, [Link_Name     =>] static_string_EXPRESSION ]);

This pragma is identical in syntax and semantics to pragma `Export' as
defined in the Ada Reference Manual.  It is provided for compatibility
with some Ada 83 compilers that used this pragma for exactly the same
purposes as pragma `Export' before the latter was standardized.


File: gnat_rm.info,  Node: Pragma External_Name_Casing,  Next: Pragma Finalize_Storage_Only,  Prev: Pragma External,  Up: Implementation Defined Pragmas

Pragma External_Name_Casing
===========================

Syntax:

     pragma External_Name_Casing (
       Uppercase | Lowercase
       [, Uppercase | Lowercase | As_Is]);

This pragma provides control over the casing of external names
associated with Import and Export pragmas.  There are two cases to
consider:

Implicit external names
     Implicit external names are derived from identifiers.  The most
     common case arises when a standard Ada 95 Import or Export pragma
     is used with only two arguments, as in:

             pragma Import (C, C_Routine);

     Since Ada is a case insensitive language, the spelling of the
     identifier in the Ada source program does not provide any
     information on the desired casing of the external name, and so a
     convention is needed.  In GNAT the default treatment is that such
     names are converted to all lower case letters.  This corresponds
     to the normal C style in many environments.  The first argument of
     pragma `External_Name_Casing' can be used to control this
     treatment.  If `Uppercase' is specified, then the name will be
     forced to all uppercase letters.  If `Lowercase' is specified,
     then the normal default of all lower case letters will be used.

     This same implicit treatment is also used in the case of extended
     DEC Ada 83 compatible Import and Export pragmas where an external
     name is explicitly specified using an identifier rather than a
     string.

Explicit external names
     Explicit external names are given as string literals.  The most
     common case arises when a standard Ada 95 Import or Export pragma
     is used with three arguments, as in:

          pragma Import (C, C_Routine, "C_routine");

     In this case, the string literal normally provides the exact
     casing required for the external name.  The second argument of
     pragma `External_Name_Casing' may be used to modify this behavior.
     If `Uppercase' is specified, then the name will be forced to all
     uppercase letters.  If `Lowercase' is specified, then the name
     will be forced to all lowercase letters.  A specification of
     `As_Is' provides the normal default behavior in which the casing is
     taken from the string provided.

This pragma may appear anywhere that a pragma is valid.  In particular,
it can be used as a configuration pragma in the `gnat.adc' file, in
which case it applies to all subsequent compilations, or it can be used
as a program unit pragma, in which case it only applies to the current
unit, or it can be used more locally to control individual
Import/Export pragmas.

   It is primarily intended for use with OpenVMS systems, where many
compilers convert all symbols to upper case by default.  For
interfacing to such compilers (e.g. the DEC C compiler), it may be
convenient to use the pragma:

     pragma External_Name_Casing (Uppercase, Uppercase);

to enforce the upper casing of all external symbols.


File: gnat_rm.info,  Node: Pragma Finalize_Storage_Only,  Next: Pragma Float_Representation,  Prev: Pragma External_Name_Casing,  Up: Implementation Defined Pragmas

Pragma Finalize_Storage_Only
============================

Syntax:

     pragma Finalize_Storage_Only (first_subtype_local_NAME);

This pragma allows the compiler not to emit a Finalize call for objects
defined at the library level.  This is mostly useful for types where
finalization is only used to deal with storage reclamation since in most
environments it is not necessary to reclaim memory just before
terminating execution, hence the name.


File: gnat_rm.info,  Node: Pragma Float_Representation,  Next: Pragma Ident,  Prev: Pragma Finalize_Storage_Only,  Up: Implementation Defined Pragmas

Pragma Float_Representation
===========================

Syntax:

     pragma Float_Representation (FLOAT_REP[, float_type_LOCAL_NAME]);

     FLOAT_REP ::= VAX_Float | IEEE_Float

In the one argument form, this pragma is a configuration pragma which
allows control over the internal representation chosen for the
predefined floating point types declared in the packages `Standard' and
`System'. On all systems other than OpenVMS, the argument must be
`IEEE_Float' and the pragma has no effect. On OpenVMS, the argument may
be `VAX_Float' to specify the use of the VAX float format for the
floating-point types in Standard. This requires that the standard
runtime libraries be recompiled. See the description of the `GNAT
LIBRARY' command in the OpenVMS version of the GNAT Users Guide for
details on the use of this command.

   The two argument form specifies the representation to be used for
the specified floating-point type. On all systems other than OpenVMS,
the argument must be `IEEE_Float' and the pragma has no effect. On
OpenVMS, the argument may be `VAX_Float' to specify the use of the VAX
float format, as follows:

   * For digits values up to 6, F float format will be used.

   * For digits values from 7 to 9, G float format will be used.

   * For digits values from 10 to 15, F float format will be used.

   * Digits values above 15 are not allowed.


File: gnat_rm.info,  Node: Pragma Ident,  Next: Pragma Import_Exception,  Prev: Pragma Float_Representation,  Up: Implementation Defined Pragmas

Pragma Ident
============

Syntax:

     pragma Ident (static_string_EXPRESSION);

This pragma provides a string identification in the generated object
file, if the system supports the concept of this kind of identification
string.  This pragma is allowed only in the outermost declarative part
or declarative items of a compilation unit. If more than one `Ident'
pragma is given, only the last one processed is effective.  On OpenVMS
systems, the effect of the pragma is identical to the effect of the DEC
Ada 83 pragma of the same name. Note that in DEC Ada 83, the maximum
allowed length is 31 characters, so if it is important to maintain
compatibility with this compiler, you should obey this length limit.


File: gnat_rm.info,  Node: Pragma Import_Exception,  Next: Pragma Import_Function,  Prev: Pragma Ident,  Up: Implementation Defined Pragmas

Pragma Import_Exception
=======================

Syntax:

     pragma Import_Exception (
          [Internal =>] local_NAME,
       [, [External =>] EXTERNAL_SYMBOL,]
       [, [Form     =>] Ada | VMS]
       [, [Code     =>] static_integer_EXPRESSION]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

This pragma is implemented only in the OpenVMS implementation of GNAT.
It allows OpenVMS conditions (for example, from OpenVMS system services
or other OpenVMS languages) to be propagated to Ada programs as Ada
exceptions.  The pragma specifies that the exception associated with an
exception declaration in an Ada program be defined externally (in
non-Ada code).  For further details on this pragma, see the DEC Ada
Language Reference Manual, section 13.9a.3.1.


File: gnat_rm.info,  Node: Pragma Import_Function,  Next: Pragma Import_Object,  Prev: Pragma Import_Exception,  Up: Implementation Defined Pragmas

Pragma Import_Function
======================

Syntax:

     pragma Import_Function (
          [Internal                 =>] local_NAME,
       [, [External                 =>] EXTERNAL_SYMBOL]
       [, [Parameter_Types          =>] PARAMETER_TYPES]
       [, [Result_Type              =>] SUBTYPE_MARK]
       [, [Mechanism                =>] MECHANISM]
       [, [Result_Mechanism         =>] MECHANISM_NAME]
       [, [First_Optional_Parameter =>] IDENTIFIER]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

     PARAMETER_TYPES ::=
       null
     | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

     TYPE_DESIGNATOR ::=
       subtype_NAME
     | subtype_Name ' Access

     MECHANISM ::=
       MECHANISM_NAME
     | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

     MECHANISM_ASSOCIATION ::=
       [formal_parameter_NAME =>] MECHANISM_NAME

     MECHANISM_NAME ::=
       Value
     | Reference
     | Descriptor [([Class =>] CLASS_NAME)]

     CLASS_NAME ::= ubs | ubsb | uba | s | sb | a | nca

This pragma is used in conjunction with a pragma `Import' to specify
additional information for an imported function.  The pragma `Import'
(or equivalent pragma `Interface') must precede the `Import_Function'
pragma and both must appear in the same declarative part as the
function specification.

   The INTERNAL argument must uniquely designate the function to which
the pragma applies.  If more than one function name exists of this name
in the declarative part you must use the `Parameter_Types' and
RESULT_TYPE parameters to achieve the required unique designation.
Subtype marks in these parameters must exactly match the subtypes in
the corresponding function specification, using positional notation to
match parameters with subtype marks.  The form with an `'Access'
attribute can be used to match an anonymous access parameter.

   You may optionally use the MECHANISM and RESULT_MECHANISM parameters
to specify passing mechanisms for the parameters and result.  If you
specify a single mechanism name, it applies to all parameters.
Otherwise you may specify a mechanism on a parameter by parameter basis
using either positional or named notation.  If the mechanism is not
specified, the default mechanism is used.

   Passing by descriptor is supported only on the OpenVMS ports of GNAT.

   `First_Optional_Parameter' applies only to OpenVMS ports of GNAT.
It specifies that the designated parameter and all following parameters
are optional, meaning that they are not passed at the generated code
level (this is distinct from the notion of optional parameters in Ada
where the parameters are passed anyway with the designated optional
parameters).  All optional parameters must be of mode `IN' and have
default parameter values that are either known at compile time
expressions, or uses of the `'Null_Parameter' attribute.


File: gnat_rm.info,  Node: Pragma Import_Object,  Next: Pragma Import_Procedure,  Prev: Pragma Import_Function,  Up: Implementation Defined Pragmas

Pragma Import_Object
====================

Syntax:

     pragma Import_Object
          [Internal =>] local_NAME,
       [, [External =>] EXTERNAL_SYMBOL],
       [, [Size     =>] EXTERNAL_SYMBOL]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

This pragma designates an object as imported, and apart from the
extended rules for external symbols, is identical in effect to the use
of the normal `Import' pragma applied to an object.  Unlike the
subprogram case, you need not use a separate `Import' pragma, although
you may do so (and probably should do so from a portability point of
view).  SIZE is syntax checked, but otherwise ignored by GNAT.


File: gnat_rm.info,  Node: Pragma Import_Procedure,  Next: Pragma Import_Valued_Procedure,  Prev: Pragma Import_Object,  Up: Implementation Defined Pragmas

Pragma Import_Procedure
=======================

Syntax:

     pragma Import_Procedure (
          [Internal                 =>] local_NAME,
       [, [External                 =>] EXTERNAL_SYMBOL]
       [, [Parameter_Types          =>] PARAMETER_TYPES]
       [, [Mechanism                =>] MECHANISM]
       [, [First_Optional_Parameter =>] IDENTIFIER]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

     PARAMETER_TYPES ::=
       null
     | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

     TYPE_DESIGNATOR ::=
       subtype_NAME
     | subtype_Name ' Access

     MECHANISM ::=
       MECHANISM_NAME
     | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

     MECHANISM_ASSOCIATION ::=
       [formal_parameter_NAME =>] MECHANISM_NAME

     MECHANISM_NAME ::=
       Value
     | Reference
     | Descriptor [([Class =>] CLASS_NAME)]

     CLASS_NAME ::= ubs | ubsb | uba | s | sb | a | nca

This pragma is identical to `Import_Function' except that it applies to
a procedure rather than a function and the parameters `Result_Type' and
`Result_Mechanism' are not permitted.


File: gnat_rm.info,  Node: Pragma Import_Valued_Procedure,  Next: Pragma Initialize_Scalars,  Prev: Pragma Import_Procedure,  Up: Implementation Defined Pragmas

Pragma Import_Valued_Procedure
==============================

Syntax:

     pragma Import_Valued_Procedure (
          [Internal                 =>] local_NAME,
       [, [External                 =>] EXTERNAL_SYMBOL]
       [, [Parameter_Types          =>] PARAMETER_TYPES]
       [, [Mechanism                =>] MECHANISM]
       [, [First_Optional_Parameter =>] IDENTIFIER]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

     PARAMETER_TYPES ::=
       null
     | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

     TYPE_DESIGNATOR ::=
       subtype_NAME
     | subtype_Name ' Access

     MECHANISM ::=
       MECHANISM_NAME
     | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

     MECHANISM_ASSOCIATION ::=
       [formal_parameter_NAME =>] MECHANISM_NAME

     MECHANISM_NAME ::=
       Value
     | Reference
     | Descriptor [([Class =>] CLASS_NAME)]

     CLASS_NAME ::= ubs | ubsb | uba | s | sb | a | nca

This pragma is identical to `Import_Procedure' except that the first
parameter of LOCAL_NAME, which must be present, must be of mode `OUT',
and externally the subprogram is treated as a function with this
parameter as the result of the function.  The purpose of this
capability is to allow the use of `OUT' and `IN OUT' parameters in
interfacing to external functions (which are not permitted in Ada
functions).  You may optionally use the `Mechanism' parameters to
specify passing mechanisms for the parameters.  If you specify a single
mechanism name, it applies to all parameters.  Otherwise you may
specify a mechanism on a parameter by parameter basis using either
positional or named notation.  If the mechanism is not specified, the
default mechanism is used.

   Note that it is important to use this pragma in conjunction with a
separate pragma Import that specifies the desired convention, since
otherwise the default convention is Ada, which is almost certainly not
what is required.


File: gnat_rm.info,  Node: Pragma Initialize_Scalars,  Next: Pragma Inline_Always,  Prev: Pragma Import_Valued_Procedure,  Up: Implementation Defined Pragmas

Pragma Initialize_Scalars
=========================

Syntax:

     pragma Initialize_Scalars;

This pragma is similar to `Normalize_Scalars' conceptually but has two
important differences.  First, there is no requirement for the pragma
to be used uniformly in all units of a partition, in particular, it is
fine to use this just for some or all of the application units of a
partition, without needing to recompile the run-time library.

   In the case where some units are compiled with the pragma, and some
without, then a declaration of a variable where the type is defined in
package Standard or is locally declared will always be subject to
initialization, as will any declaration of a scalar variable.  For
composite variables, whether the variable is initialized may also
depend on whether the package in which the type of the variable is
declared is compiled with the pragma.

   The other important difference is that you can control the value used
for initializing scalar objects.  At bind time, you can select several
options for initialization. You can initialize with invalid values
(similar to Normalize_Scalars, though for Initialize_Scalars it is not
always possible to determine the invalid values in complex cases like
signed component fields with non-standard sizes). You can also
initialize with high or low values, or with a specified bit pattern.
See the users guide for binder options for specifying these cases.

   This means that you can compile a program, and then without having to
recompile the program, you can run it with different values being used
for initializing otherwise uninitialized values, to test if your program
behavior depends on the choice.  Of course the behavior should not
change, and if it does, then most likely you have an erroneous
reference to an uninitialized value.

   It is even possible to change the value at execution time
eliminating even the need to rebind with a different switch using an
environment variable.  See the GNAT users guide for details.

   Note that pragma `Initialize_Scalars' is particularly useful in
conjunction with the enhanced validity checking that is now provided in
GNAT, which checks for invalid values under more conditions.  Using
this feature (see description of the `-gnatV' flag in the users guide)
in conjunction with pragma `Initialize_Scalars' provides a powerful new
tool to assist in the detection of problems caused by uninitialized
variables.

   Note: the use of `Initialize_Scalars' has a fairly extensive effect
on the generated code. This may cause your code to be substantially
larger. It may also cause an increase in the amount of stack required,
so it is probably a good idea to turn on stack checking (see
description of stack checking in the GNAT users guide) when using this
pragma.


File: gnat_rm.info,  Node: Pragma Inline_Always,  Next: Pragma Inline_Generic,  Prev: Pragma Initialize_Scalars,  Up: Implementation Defined Pragmas

Pragma Inline_Always
====================

Syntax:

     pragma Inline_Always (NAME [, NAME]);

Similar to pragma `Inline' except that inlining is not subject to the
use of option `-gnatn' and the inlining happens regardless of whether
this option is used.


File: gnat_rm.info,  Node: Pragma Inline_Generic,  Next: Pragma Interface,  Prev: Pragma Inline_Always,  Up: Implementation Defined Pragmas

Pragma Inline_Generic
=====================

Syntax:

     pragma Inline_Generic (generic_package_NAME);

This is implemented for compatibility with DEC Ada 83 and is recognized,
but otherwise ignored, by GNAT.  All generic instantiations are inlined
by default when using GNAT.


File: gnat_rm.info,  Node: Pragma Interface,  Next: Pragma Interface_Name,  Prev: Pragma Inline_Generic,  Up: Implementation Defined Pragmas

Pragma Interface
================

Syntax:

     pragma Interface (
          [Convention    =>] convention_identifier,
          [Entity =>] local_NAME
       [, [External_Name =>] static_string_expression],
       [, [Link_Name     =>] static_string_expression]);

This pragma is identical in syntax and semantics to the standard Ada 95
pragma `Import'.  It is provided for compatibility with Ada 83.  The
definition is upwards compatible both with pragma `Interface' as
defined in the Ada 83 Reference Manual, and also with some extended
implementations of this pragma in certain Ada 83 implementations.


File: gnat_rm.info,  Node: Pragma Interface_Name,  Next: Pragma Interrupt_Handler,  Prev: Pragma Interface,  Up: Implementation Defined Pragmas

Pragma Interface_Name
=====================

Syntax:

     pragma Interface_Name (
          [Entity        =>] local_NAME
       [, [External_Name =>] static_string_EXPRESSION]
       [, [Link_Name     =>] static_string_EXPRESSION]);

This pragma provides an alternative way of specifying the interface name
for an interfaced subprogram, and is provided for compatibility with Ada
83 compilers that use the pragma for this purpose.  You must provide at
least one of EXTERNAL_NAME or LINK_NAME.


File: gnat_rm.info,  Node: Pragma Interrupt_Handler,  Next: Pragma Interrupt_State,  Prev: Pragma Interface_Name,  Up: Implementation Defined Pragmas

Pragma Interrupt_Handler
========================

Syntax:

     pragma Interrupt_Handler (procedure_local_NAME);

This program unit pragma is supported for parameterless protected
procedures as described in Annex C of the Ada Reference Manual. On the
AAMP target the pragma can also be specified for nonprotected
parameterless procedures that are declared at the library level (which
includes procedures declared at the top level of a library package). In
the case of AAMP, when this pragma is applied to a nonprotected
procedure, the instruction `IERET' is generated for returns from the
procedure, enabling maskable interrupts, in place of the normal return
instruction.


File: gnat_rm.info,  Node: Pragma Interrupt_State,  Next: Pragma Keep_Names,  Prev: Pragma Interrupt_Handler,  Up: Implementation Defined Pragmas

Pragma Interrupt_State
======================

Syntax:

     pragma Interrupt_State (Name => value, State => SYSTEM | RUNTIME | USER);

Normally certain interrupts are reserved to the implementation.  Any
attempt to attach an interrupt causes Program_Error to be raised, as
described in RM C.3.2(22).  A typical example is the `SIGINT' interrupt
used in many systems for an `Ctrl-C' interrupt.  Normally this
interrupt is reserved to the implementation, so that `Ctrl-C' can be
used to interrupt execution.  Additionally, signals such as `SIGSEGV',
`SIGABRT', `SIGFPE' and `SIGILL' are often mapped to specific Ada
exceptions, or used to implement run-time functions such as the `abort'
statement and stack overflow checking.

   Pragma `Interrupt_State' provides a general mechanism for overriding
such uses of interrupts.  It subsumes the functionality of pragma
`Unreserve_All_Interrupts'.  Pragma `Interrupt_State' is not available
on OS/2, Windows or VMS.  On all other platforms than VxWorks, it
applies to signals; on VxWorks, it applies to vectored hardware
interrupts and may be used to mark interrupts required by the board
support package as reserved.

   Interrupts can be in one of three states:
   * System

     The interrupt is reserved (no Ada handler can be installed), and
     the Ada run-time may not install a handler. As a result you are
     guaranteed standard system default action if this interrupt is
     raised.

   * Runtime

     The interrupt is reserved (no Ada handler can be installed). The
     run time is allowed to install a handler for internal control
     purposes, but is not required to do so.

   * User

     The interrupt is unreserved.  The user may install a handler to
     provide some other action.

These states are the allowed values of the `State' parameter of the
pragma.  The `Name' parameter is a value of the type
`Ada.Interrupts.Interrupt_ID'.  Typically, it is a name declared in
`Ada.Interrupts.Names'.

   This is a configuration pragma, and the binder will check that there
are no inconsistencies between different units in a partition in how a
given interrupt is specified. It may appear anywhere a pragma is legal.

   The effect is to move the interrupt to the specified state.

   By declaring interrupts to be SYSTEM, you guarantee the standard
system action, such as a core dump.

   By declaring interrupts to be USER, you guarantee that you can
install a handler.

   Note that certain signals on many operating systems cannot be caught
and handled by applications.  In such cases, the pragma is ignored.
See the operating system documentation, or the value of the array
`Reserved' declared in the specification of package
`System.OS_Interface'.

   Overriding the default state of signals used by the Ada runtime may
interfere with an application's runtime behavior in the cases of the
synchronous signals, and in the case of the signal used to implement
the `abort' statement.


File: gnat_rm.info,  Node: Pragma Keep_Names,  Next: Pragma License,  Prev: Pragma Interrupt_State,  Up: Implementation Defined Pragmas

Pragma Keep_Names
=================

Syntax:

     pragma Keep_Names ([On =>] enumeration_first_subtype_local_NAME);

The LOCAL_NAME argument must refer to an enumeration first subtype in
the current declarative part. The effect is to retain the enumeration
literal names for use by `Image' and `Value' even if a global
`Discard_Names' pragma applies. This is useful when you want to
generally suppress enumeration literal names and for example you
therefore use a `Discard_Names' pragma in the `gnat.adc' file, but you
want to retain the names for specific enumeration types.


File: gnat_rm.info,  Node: Pragma License,  Next: Pragma Link_With,  Prev: Pragma Keep_Names,  Up: Implementation Defined Pragmas

Pragma License
==============

Syntax:

     pragma License (Unrestricted | GPL | Modified_GPL | Restricted);

This pragma is provided to allow automated checking for appropriate
license conditions with respect to the standard and modified GPL.  A
pragma `License', which is a configuration pragma that typically
appears at the start of a source file or in a separate `gnat.adc' file,
specifies the licensing conditions of a unit as follows:

   * Unrestricted This is used for a unit that can be freely used with
     no license restrictions.  Examples of such units are public domain
     units, and units from the Ada Reference Manual.

   * GPL This is used for a unit that is licensed under the unmodified
     GPL, and which therefore cannot be `with''ed by a restricted unit.

   * Modified_GPL This is used for a unit licensed under the GNAT
     modified GPL that includes a special exception paragraph that
     specifically permits the inclusion of the unit in programs without
     requiring the entire program to be released under the GPL.

   * Restricted This is used for a unit that is restricted in that it
     is not permitted to depend on units that are licensed under the
     GPL.  Typical examples are proprietary code that is to be released
     under more restrictive license conditions.  Note that restricted
     units are permitted to `with' units which are licensed under the
     modified GPL (this is the whole point of the modified GPL).


Normally a unit with no `License' pragma is considered to have an
unknown license, and no checking is done.  However, standard GNAT
headers are recognized, and license information is derived from them as
follows.

     A GNAT license header starts with a line containing 78 hyphens.
     The following comment text is searched for the appearance of any
     of the following strings.

     If the string "GNU General Public License" is found, then the unit
     is assumed to have GPL license, unless the string "As a special
     exception" follows, in which case the license is assumed to be
     modified GPL.

     If one of the strings "This specification is adapted from the Ada
     Semantic Interface" or "This specification is derived from the Ada
     Reference Manual" is found then the unit is assumed to be
     unrestricted.

These default actions means that a program with a restricted license
pragma will automatically get warnings if a GPL unit is inappropriately
`with''ed.  For example, the program:

     with Sem_Ch3;
     with GNAT.Sockets;
     procedure Secret_Stuff is
       ...
     end Secret_Stuff

if compiled with pragma `License' (`Restricted') in a `gnat.adc' file
will generate the warning:

     1.  with Sem_Ch3;
             |
        >>> license of withed unit "Sem_Ch3" is incompatible

     2.  with GNAT.Sockets;
     3.  procedure Secret_Stuff is

Here we get a warning on `Sem_Ch3' since it is part of the GNAT
compiler and is licensed under the GPL, but no warning for
`GNAT.Sockets' which is part of the GNAT run time, and is therefore
licensed under the modified GPL.


File: gnat_rm.info,  Node: Pragma Link_With,  Next: Pragma Linker_Alias,  Prev: Pragma License,  Up: Implementation Defined Pragmas

Pragma Link_With
================

Syntax:

     pragma Link_With (static_string_EXPRESSION {,static_string_EXPRESSION});

This pragma is provided for compatibility with certain Ada 83 compilers.
It has exactly the same effect as pragma `Linker_Options' except that
spaces occurring within one of the string expressions are treated as
separators. For example, in the following case:

     pragma Link_With ("-labc -ldef");

results in passing the strings `-labc' and `-ldef' as two separate
arguments to the linker. In addition pragma Link_With allows multiple
arguments, with the same effect as successive pragmas.


File: gnat_rm.info,  Node: Pragma Linker_Alias,  Next: Pragma Linker_Constructor,  Prev: Pragma Link_With,  Up: Implementation Defined Pragmas

Pragma Linker_Alias
===================

Syntax:

     pragma Linker_Alias (
       [Entity =>] local_NAME
       [Target =>] static_string_EXPRESSION);

LOCAL_NAME must refer to an object that is declared at the library
level. This pragma establishes the given entity as a linker alias for
the given target. It is equivalent to `__attribute__((alias))' in GNU C
and causes LOCAL_NAME to be emitted as an alias for the symbol
STATIC_STRING_EXPRESSION in the object file, that is to say no space is
reserved for LOCAL_NAME by the assembler and it will be resolved to the
same address as STATIC_STRING_EXPRESSION by the linker.

   The actual linker name for the target must be used (e.g. the fully
encoded name with qualification in Ada, or the mangled name in C++), or
it must be declared using the C convention with `pragma Import' or
`pragma Export'.

   Not all target machines support this pragma. On some of them it is
accepted only if `pragma Weak_External' has been applied to LOCAL_NAME.

     --  Example of the use of pragma Linker_Alias

     package p is
       i : Integer := 1;
       pragma Export (C, i);

       new_name_for_i : Integer;
       pragma Linker_Alias (new_name_for_i, "i");
     end p;


File: gnat_rm.info,  Node: Pragma Linker_Constructor,  Next: Pragma Linker_Destructor,  Prev: Pragma Linker_Alias,  Up: Implementation Defined Pragmas

Pragma Linker_Constructor
=========================

Syntax:

     pragma Linker_Constructor (procedure_LOCAL_NAME);

PROCEDURE_LOCAL_NAME must refer to a parameterless procedure that is
declared at the library level. A procedure to which this pragma is
applied will be treated as an initialization routine by the linker.  It
is equivalent to `__attribute__((constructor))' in GNU C and causes
PROCEDURE_LOCAL_NAME to be invoked before the entry point of the
executable is called (or immediately after the shared library is loaded
if the procedure is linked in a shared library), in particular before
the Ada run-time environment is set up.

   Because of these specific contexts, the set of operations such a
procedure can perform is very limited and the type of objects it can
manipulate is essentially restricted to the elementary types. In
particular, it must only contain code to which pragma Restrictions
(No_Elaboration_Code) applies.

   This pragma is used by GNAT to implement auto-initialization of
shared Stand Alone Libraries, which provides a related capability
without the restrictions listed above. Where possible, the use of Stand
Alone Libraries is preferable to the use of this pragma.


File: gnat_rm.info,  Node: Pragma Linker_Destructor,  Next: Pragma Linker_Section,  Prev: Pragma Linker_Constructor,  Up: Implementation Defined Pragmas

Pragma Linker_Destructor
========================

Syntax:

     pragma Linker_Destructor (procedure_LOCAL_NAME);

PROCEDURE_LOCAL_NAME must refer to a parameterless procedure that is
declared at the library level. A procedure to which this pragma is
applied will be treated as a finalization routine by the linker.  It is
equivalent to `__attribute__((destructor))' in GNU C and causes
PROCEDURE_LOCAL_NAME to be invoked after the entry point of the
executable has exited (or immediately before the shared library is
unloaded if the procedure is linked in a shared library), in particular
after the Ada run-time environment is shut down.

   See `pragma Linker_Constructor' for the set of restrictions that
apply because of these specific contexts.


File: gnat_rm.info,  Node: Pragma Linker_Section,  Next: Pragma Long_Float,  Prev: Pragma Linker_Destructor,  Up: Implementation Defined Pragmas

Pragma Linker_Section
=====================

Syntax:

     pragma Linker_Section (
       [Entity  =>] local_NAME
       [Section =>] static_string_EXPRESSION);

LOCAL_NAME must refer to an object that is declared at the library
level. This pragma specifies the name of the linker section for the
given entity. It is equivalent to `__attribute__((section))' in GNU C
and causes LOCAL_NAME to be placed in the STATIC_STRING_EXPRESSION
section of the executable (assuming the linker doesn't rename the
section).

   The compiler normally places library-level objects in standard
sections depending on their type: procedures and functions generally go
in the `.text' section, initialized variables in the `.data' section
and uninitialized variables in the `.bss' section.

   Other, special sections may exist on given target machines to map
special hardware, for example I/O ports or flash memory. This pragma is
a means to defer the final layout of the executable to the linker, thus
fully working at the symbolic level with the compiler.

   Some file formats do not support arbitrary sections so not all target
machines support this pragma. The use of this pragma may cause a program
execution to be erroneous if it is used to place an entity into an
inappropriate section (e.g. a modified variable into the `.text'
section). See also `pragma Persistent_BSS'.

     --  Example of the use of pragma Linker_Section

     package IO_Card is
       Port_A : Integer;
       pragma Volatile (Port_A);
       pragma Linker_Section (Port_A, ".bss.port_a");

       Port_B : Integer;
       pragma Volatile (Port_B);
       pragma Linker_Section (Port_B, ".bss.port_b");
     end IO_Card;


File: gnat_rm.info,  Node: Pragma Long_Float,  Next: Pragma Machine_Attribute,  Prev: Pragma Linker_Section,  Up: Implementation Defined Pragmas

Pragma Long_Float
=================

Syntax:

     pragma Long_Float (FLOAT_FORMAT);

     FLOAT_FORMAT ::= D_Float | G_Float

This pragma is implemented only in the OpenVMS implementation of GNAT.
It allows control over the internal representation chosen for the
predefined type `Long_Float' and for floating point type
representations with `digits' specified in the range 7 through 15.  For
further details on this pragma, see the `DEC Ada Language Reference
Manual', section 3.5.7b.  Note that to use this pragma, the standard
runtime libraries must be recompiled.  See the description of the `GNAT
LIBRARY' command in the OpenVMS version of the GNAT User's Guide for
details on the use of this command.


File: gnat_rm.info,  Node: Pragma Machine_Attribute,  Next: Pragma Main_Storage,  Prev: Pragma Long_Float,  Up: Implementation Defined Pragmas

Pragma Machine_Attribute
========================

Syntax:

     pragma Machine_Attribute (
       [Attribute_Name =>] string_EXPRESSION,
       [Entity         =>] local_NAME);

Machine-dependent attributes can be specified for types and/or
declarations.  This pragma is semantically equivalent to
`__attribute__((STRING_EXPRESSION))' in GNU C, where
`STRING_EXPRESSION' is recognized by the target macro
`TARGET_ATTRIBUTE_TABLE' which is defined for each machine.  See the
GCC manual for further information.  It is not possible to specify
attributes defined by other languages, only attributes defined by the
machine the code is intended to run on.


File: gnat_rm.info,  Node: Pragma Main_Storage,  Next: Pragma No_Return,  Prev: Pragma Machine_Attribute,  Up: Implementation Defined Pragmas

Pragma Main_Storage
===================

Syntax:

     pragma Main_Storage
       (MAIN_STORAGE_OPTION [, MAIN_STORAGE_OPTION]);

     MAIN_STORAGE_OPTION ::=
       [WORKING_STORAGE =>] static_SIMPLE_EXPRESSION
     | [TOP_GUARD       =>] static_SIMPLE_EXPRESSION

This pragma is provided for compatibility with OpenVMS VAX Systems.  It
has no effect in GNAT, other than being syntax checked.  Note that the
pragma also has no effect in DEC Ada 83 for OpenVMS Alpha Systems.


File: gnat_rm.info,  Node: Pragma No_Return,  Next: Pragma No_Strict_Aliasing,  Prev: Pragma Main_Storage,  Up: Implementation Defined Pragmas

Pragma No_Return
================

Syntax:

     pragma No_Return (procedure_local_NAME);

PROCEDURE_LOCAL_NAME must refer to one or more procedure declarations
in the current declarative part.  A procedure to which this pragma is
applied may not contain any explicit `return' statements, and also may
not contain any implicit return statements from falling off the end of
a statement sequence.  One use of this pragma is to identify procedures
whose only purpose is to raise an exception.

   Another use of this pragma is to suppress incorrect warnings about
missing returns in functions, where the last statement of a function
statement sequence is a call to such a procedure.


File: gnat_rm.info,  Node: Pragma No_Strict_Aliasing,  Next: Pragma Normalize_Scalars,  Prev: Pragma No_Return,  Up: Implementation Defined Pragmas

Pragma No_Strict_Aliasing
=========================

Syntax:

     pragma No_Strict_Aliasing [([Entity =>] type_LOCAL_NAME)];

TYPE_LOCAL_NAME must refer to an access type declaration in the current
declarative part.  The effect is to inhibit strict aliasing
optimization for the given type.  The form with no arguments is a
configuration pragma which applies to all access types declared in
units to which the pragma applies. For a detailed description of the
strict aliasing optimization, and the situations in which it must be
suppressed, see section "Optimization and Strict Aliasing" in the
{No value for `EDITION'} User's Guide.


File: gnat_rm.info,  Node: Pragma Normalize_Scalars,  Next: Pragma Obsolescent,  Prev: Pragma No_Strict_Aliasing,  Up: Implementation Defined Pragmas

Pragma Normalize_Scalars
========================

Syntax:

     pragma Normalize_Scalars;

This is a language defined pragma which is fully implemented in GNAT.
The effect is to cause all scalar objects that are not otherwise
initialized to be initialized.  The initial values are implementation
dependent and are as follows:

`Standard.Character'
     Objects whose root type is Standard.Character are initialized to
     Character'Last unless the subtype range excludes NUL (in which case
     NUL is used). This choice will always generate an invalid value if
     one exists.

`Standard.Wide_Character'
     Objects whose root type is Standard.Wide_Character are initialized
     to Wide_Character'Last unless the subtype range excludes NUL (in
     which case NUL is used). This choice will always generate an
     invalid value if one exists.

`Standard.Wide_Wide_Character'
     Objects whose root type is Standard.Wide_Wide_Character are
     initialized to the invalid value 16#FFFF_FFFF# unless the subtype
     range excludes NUL (in which case NUL is used). This choice will
     always generate an invalid value if one exists.

`Integer types'
     Objects of an integer type are treated differently depending on
     whether negative values are present in the subtype. If no negative
     values are present, then all one bits is used as the initial value
     except in the special case where zero is excluded from the
     subtype, in which case all zero bits are used. This choice will
     always generate an invalid value if one exists.

     For subtypes with negative values present, the largest negative
     number is used, except in the unusual case where this largest
     negative number is in the subtype, and the largest positive number
     is not, in which case the largest positive value is used. This
     choice will always generate an invalid value if one exists.

`Floating-Point Types'
     Objects of all floating-point types are initialized to all 1-bits.
     For standard IEEE format, this corresponds to a NaN (not a number)
     which is indeed an invalid value.

`Fixed-Point Types'
     Objects of all fixed-point types are treated as described above
     for integers, with the rules applying to the underlying integer
     value used to represent the fixed-point value.

`Modular types'
     Objects of a modular type are initialized to all one bits, except
     in the special case where zero is excluded from the subtype, in
     which case all zero bits are used. This choice will always
     generate an invalid value if one exists.

`Enumeration types'
     Objects of an enumeration type are initialized to all one-bits,
     i.e. to the value `2 ** typ'Size - 1' unless the subtype excludes
     the literal whose Pos value is zero, in which case a code of zero
     is used. This choice will always generate an invalid value if one
     exists.



File: gnat_rm.info,  Node: Pragma Obsolescent,  Next: Pragma Passive,  Prev: Pragma Normalize_Scalars,  Up: Implementation Defined Pragmas

Pragma Obsolescent
==================

Syntax:

     pragma Obsolescent [(static_string_EXPRESSION [,Ada_05])];

This pragma can occur immediately following a subprogram declaration
and indicates that the associated function or procedure is considered
obsolescent and should not be used. Typically this is used when an API
must be modified by eventually removing or modifying existing
subprograms. The pragma can be used at an intermediate stage when the
subprogram is still present, but will be removed later.

   The effect of this pragma is to output a warning message on a call
to a program thus marked that the subprogram is obsolescent if the
appropriate warning option in the compiler is activated. If a parameter
is present, then a second warning message is given containing this text.
In addition, a call to such a program is considered a violation of
pragma Restrictions (No_Obsolescent_Features).

   This pragma can also be used as a program unit pragma for a package,
in which case it indicates that the entire package is considered
obsolescent. In this case a client `with''ing such a package violates
the restriction, and the `with' statement is flagged with warnings if
the warning option is set.

   If the optional second parameter is present (which must be exactly
the identifier Ada_05, no other argument is allowed), then the
indication of obsolescence applies only when compiling in Ada 2005
mode. This is primarily intended for dealing with the situations in the
predefined library where subprograms or packages have become defined as
obsolescent in Ada 2005 (e.g. in Ada.Characters.Handling), but may be
used anywhere.


File: gnat_rm.info,  Node: Pragma Passive,  Next: Pragma Persistent_BSS,  Prev: Pragma Obsolescent,  Up: Implementation Defined Pragmas

Pragma Passive
==============

Syntax:

     pragma Passive ([Semaphore | No]);

Syntax checked, but otherwise ignored by GNAT.  This is recognized for
compatibility with DEC Ada 83 implementations, where it is used within a
task definition to request that a task be made passive.  If the argument
`Semaphore' is present, or the argument is omitted, then DEC Ada 83
treats the pragma as an assertion that the containing task is passive
and that optimization of context switch with this task is permitted and
desired.  If the argument `No' is present, the task must not be
optimized.  GNAT does not attempt to optimize any tasks in this manner
(since protected objects are available in place of passive tasks).


File: gnat_rm.info,  Node: Pragma Persistent_BSS,  Next: Pragma Polling,  Prev: Pragma Passive,  Up: Implementation Defined Pragmas

Pragma Persistent_BSS
=====================

Syntax:

     pragma Persistent_BSS [local_NAME]

This pragma allows selected objects to be placed in the
`.persistent_bss' section. On some targets the linker and loader
provide for special treatment of this section, allowing a program to be
reloaded without affecting the contents of this data (hence the name
persistent).

   There are two forms of usage. If an argument is given, it must be the
local name of a library level object, with no explicit initialization
and whose type is potentially persistent. If no argument is given, then
the pragma is a configuration pragma, and applies to all library level
objects with no explicit initialization of potentially persistent types.

   A potentially persistent type is a scalar type, or a non-tagged,
non-discriminated record, all of whose components have no explicit
initialization and are themselves of a potentially persistent type, or
an array, all of whose constraints are static, and whose component type
is potentially persistent.

   If this pragma is used on a target where this feature is not
supported, then the pragma will be ignored. See also `pragma
Linker_Section'.


File: gnat_rm.info,  Node: Pragma Polling,  Next: Pragma Profile (Ravenscar),  Prev: Pragma Persistent_BSS,  Up: Implementation Defined Pragmas

Pragma Polling
==============

Syntax:

     pragma Polling (ON | OFF);

This pragma controls the generation of polling code.  This is normally
off.  If `pragma Polling (ON)' is used then periodic calls are
generated to the routine `Ada.Exceptions.Poll'.  This routine is a
separate unit in the runtime library, and can be found in file
`a-excpol.adb'.

   Pragma `Polling' can appear as a configuration pragma (for example it
can be placed in the `gnat.adc' file) to enable polling globally, or it
can be used in the statement or declaration sequence to control polling
more locally.

   A call to the polling routine is generated at the start of every
loop and at the start of every subprogram call.  This guarantees that
the `Poll' routine is called frequently, and places an upper bound
(determined by the complexity of the code) on the period between two
`Poll' calls.

   The primary purpose of the polling interface is to enable
asynchronous aborts on targets that cannot otherwise support it (for
example Windows NT), but it may be used for any other purpose requiring
periodic polling.  The standard version is null, and can be replaced by
a user program.  This will require re-compilation of the
`Ada.Exceptions' package that can be found in files `a-except.ads' and
`a-except.adb'.

   A standard alternative unit (in file `4wexcpol.adb' in the standard
GNAT distribution) is used to enable the asynchronous abort capability
on targets that do not normally support the capability.  The version of
`Poll' in this file makes a call to the appropriate runtime routine to
test for an abort condition.

   Note that polling can also be enabled by use of the `-gnatP' switch.
See the `GNAT User's Guide' for details.


File: gnat_rm.info,  Node: Pragma Profile (Ravenscar),  Next: Pragma Profile (Restricted),  Prev: Pragma Polling,  Up: Implementation Defined Pragmas

Pragma Profile (Ravenscar)
==========================

Syntax:

     pragma Profile (Ravenscar);

A configuration pragma that establishes the following set of
configuration pragmas:

`Task_Dispatching_Policy (FIFO_Within_Priorities)'
     [RM D.2.2] Tasks are dispatched following a preemptive
     priority-ordered scheduling policy.

`Locking_Policy (Ceiling_Locking)'
     [RM D.3] While tasks and interrupts execute a protected action,
     they inherit the ceiling priority of the corresponding protected
     object.
   plus the following set of restrictions:

`Max_Entry_Queue_Length = 1'
     Defines the maximum number of calls that are queued on a
     (protected) entry.  Note that this restrictions is checked at run
     time. Violation of this restriction results in the raising of
     Program_Error exception at the point of the call. For the Profile
     (Ravenscar) the value of Max_Entry_Queue_Length is always 1 and
     hence no task can be queued on a protected entry.

`Max_Protected_Entries = 1'
     [RM D.7] Specifies the maximum number of entries per protected
     type. The bounds of every entry family of a protected unit shall
     be static, or shall be defined by a discriminant of a subtype
     whose corresponding bound is static.  For the Profile (Ravenscar)
     the value of Max_Protected_Entries is always 1.

`Max_Task_Entries = 0'
     [RM D.7] Specifies the maximum number of entries per task.  The
     bounds of every entry family of a task unit shall be static, or
     shall be defined by a discriminant of a subtype whose
     corresponding bound is static.  A value of zero indicates that no
     rendezvous are possible.  For the Profile (Ravenscar), the value
     of Max_Task_Entries is always 0 (zero).

`No_Abort_Statements'
     [RM D.7] There are no abort_statements, and there are no calls to
     Task_Identification.Abort_Task.

`No_Asynchronous_Control'
     [RM D.7] There are no semantic dependences on the package
     Asynchronous_Task_Control.

`No_Calendar'
     There are no semantic dependencies on the package Ada.Calendar.

`No_Dynamic_Attachment'
     There is no call to any of the operations defined in package
     Ada.Interrupts (Is_Reserved, Is_Attached, Current_Handler,
     Attach_Handler, Exchange_Handler, Detach_Handler, and Reference).

`No_Dynamic_Priorities'
     [RM D.7] There are no semantic dependencies on the package
     Dynamic_Priorities.

`No_Implicit_Heap_Allocations'
     [RM D.7] No constructs are allowed to cause implicit heap
     allocation.

`No_Local_Protected_Objects'
     Protected objects and access types that designate such objects
     shall be declared only at library level.

`No_Protected_Type_Allocators'
     There are no allocators for protected types or types containing
     protected subcomponents.

`No_Relative_Delay'
     There are no delay_relative statements.

`No_Requeue_Statements'
     Requeue statements are not allowed.

`No_Select_Statements'
     There are no select_statements.

`No_Task_Allocators'
     [RM D.7] There are no allocators for task types or types
     containing task subcomponents.

`No_Task_Attributes_Package'
     There are no semantic dependencies on the Ada.Task_Attributes
     package.

`No_Task_Hierarchy'
     [RM D.7] All (non-environment) tasks depend directly on the
     environment task of the partition.

`No_Task_Termination'
     Tasks which terminate are erroneous.

`Simple_Barriers'
     Entry barrier condition expressions shall be either static boolean
     expressions or boolean objects which are declared in the protected
     type which contains the entry.

This set of configuration pragmas and restrictions correspond to the
definition of the "Ravenscar Profile" for limited tasking, devised and
published by the `International Real-Time Ada Workshop', 1997, and
whose most recent description is available at
`ftp://ftp.openravenscar.org/openravenscar/ravenscar00.pdf'.

   The original definition of the profile was revised at subsequent
IRTAW meetings. It has been included in the ISO `Guide for the Use of
the Ada Programming Language in High Integrity Systems', and has been
approved by ISO/IEC/SC22/WG9 for inclusion in the next revision of the
standard. The formal definition given by the Ada Rapporteur Group (ARG)
can be found in two Ada Issues (AI-249 and AI-305) available at
`http://www.ada-auth.org/cgi-bin/cvsweb.cgi/AIs/AI-00249.TXT' and
`http://www.ada-auth.org/cgi-bin/cvsweb.cgi/AIs/AI-00305.TXT'
respectively.

   The above set is a superset of the restrictions provided by pragma
`Profile (Restricted)', it includes six additional restrictions
(`Simple_Barriers', `No_Select_Statements', `No_Calendar',
`No_Implicit_Heap_Allocations', `No_Relative_Delay' and
`No_Task_Termination').  This means that pragma `Profile (Ravenscar)',
like the pragma `Profile (Restricted)', automatically causes the use of
a simplified, more efficient version of the tasking run-time system.


File: gnat_rm.info,  Node: Pragma Profile (Restricted),  Next: Pragma Propagate_Exceptions,  Prev: Pragma Profile (Ravenscar),  Up: Implementation Defined Pragmas

Pragma Profile (Restricted)
===========================

Syntax:

     pragma Profile (Restricted);

A configuration pragma that establishes the following set of
restrictions:

   * No_Abort_Statements

   * No_Entry_Queue

   * No_Task_Hierarchy

   * No_Task_Allocators

   * No_Dynamic_Priorities

   * No_Terminate_Alternatives

   * No_Dynamic_Attachment

   * No_Protected_Type_Allocators

   * No_Local_Protected_Objects

   * No_Requeue_Statements

   * No_Task_Attributes_Package

   * Max_Asynchronous_Select_Nesting =  0

   * Max_Task_Entries =  0

   * Max_Protected_Entries = 1

   * Max_Select_Alternatives = 0

This set of restrictions causes the automatic selection of a simplified
version of the run time that provides improved performance for the
limited set of tasking functionality permitted by this set of
restrictions.


File: gnat_rm.info,  Node: Pragma Propagate_Exceptions,  Next: Pragma Psect_Object,  Prev: Pragma Profile (Restricted),  Up: Implementation Defined Pragmas

Pragma Propagate_Exceptions
===========================

Syntax:

     pragma Propagate_Exceptions (subprogram_local_NAME);

This pragma indicates that the given entity, which is the name of an
imported foreign-language subprogram may receive an Ada exception, and
that the exception should be propagated.  It is relevant only if zero
cost exception handling is in use, and is thus never needed if the
alternative `longjmp' / `setjmp' implementation of exceptions is used
(although it is harmless to use it in such cases).

   The implementation of fast exceptions always properly propagates
exceptions through Ada code, as described in the Ada Reference Manual.
However, this manual is silent about the propagation of exceptions
through foreign code.  For example, consider the situation where `P1'
calls `P2', and `P2' calls `P3', where `P1' and `P3' are in Ada, but
`P2' is in C.  `P3' raises an Ada exception.  The question is whether
or not it will be propagated through `P2' and can be handled in `P1'.

   For the `longjmp' / `setjmp' implementation of exceptions, the
answer is always yes.  For some targets on which zero cost exception
handling is implemented, the answer is also always yes.  However, there
are some targets, notably in the current version all x86 architecture
targets, in which the answer is that such propagation does not happen
automatically.  If such propagation is required on these targets, it is
mandatory to use `Propagate_Exceptions' to name all foreign language
routines through which Ada exceptions may be propagated.


File: gnat_rm.info,  Node: Pragma Psect_Object,  Next: Pragma Pure_Function,  Prev: Pragma Propagate_Exceptions,  Up: Implementation Defined Pragmas

Pragma Psect_Object
===================

Syntax:

     pragma Psect_Object (
          [Internal =>] local_NAME,
       [, [External =>] EXTERNAL_SYMBOL]
       [, [Size     =>] EXTERNAL_SYMBOL]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

This pragma is identical in effect to pragma `Common_Object'.


File: gnat_rm.info,  Node: Pragma Pure_Function,  Next: Pragma Restriction_Warnings,  Prev: Pragma Psect_Object,  Up: Implementation Defined Pragmas

Pragma Pure_Function
====================

Syntax:

     pragma Pure_Function ([Entity =>] function_local_NAME);

This pragma appears in the same declarative part as a function
declaration (or a set of function declarations if more than one
overloaded declaration exists, in which case the pragma applies to all
entities).  It specifies that the function `Entity' is to be considered
pure for the purposes of code generation.  This means that the compiler
can assume that there are no side effects, and in particular that two
calls with identical arguments produce the same result.  It also means
that the function can be used in an address clause.

   Note that, quite deliberately, there are no static checks to try to
ensure that this promise is met, so `Pure_Function' can be used with
functions that are conceptually pure, even if they do modify global
variables.  For example, a square root function that is instrumented to
count the number of times it is called is still conceptually pure, and
can still be optimized, even though it modifies a global variable (the
count).  Memo functions are another example (where a table of previous
calls is kept and consulted to avoid re-computation).

   Note: Most functions in a `Pure' package are automatically pure, and
there is no need to use pragma `Pure_Function' for such functions.  One
exception is any function that has at least one formal of type
`System.Address' or a type derived from it.  Such functions are not
considered pure by default, since the compiler assumes that the
`Address' parameter may be functioning as a pointer and that the
referenced data may change even if the address value does not.
Similarly, imported functions are not considered to be pure by default,
since there is no way of checking that they are in fact pure.  The use
of pragma `Pure_Function' for such a function will override these
default assumption, and cause the compiler to treat a designated
subprogram as pure in these cases.

   Note: If pragma `Pure_Function' is applied to a renamed function, it
applies to the underlying renamed function.  This can be used to
disambiguate cases of overloading where some but not all functions in a
set of overloaded functions are to be designated as pure.


File: gnat_rm.info,  Node: Pragma Restriction_Warnings,  Next: Pragma Source_File_Name,  Prev: Pragma Pure_Function,  Up: Implementation Defined Pragmas

Pragma Restriction_Warnings
===========================

Syntax:

     pragma Restriction_Warnings
       (restriction_IDENTIFIER {, restriction_IDENTIFIER});

This pragma allows a series of restriction identifiers to be specified
(the list of allowed identifiers is the same as for pragma
`Restrictions'). For each of these identifiers the compiler checks for
violations of the restriction, but generates a warning message rather
than an error message if the restriction is violated.


File: gnat_rm.info,  Node: Pragma Source_File_Name,  Next: Pragma Source_File_Name_Project,  Prev: Pragma Restriction_Warnings,  Up: Implementation Defined Pragmas

Pragma Source_File_Name
=======================

Syntax:

     pragma Source_File_Name (
       [Unit_Name   =>] unit_NAME,
       Spec_File_Name =>  STRING_LITERAL);

     pragma Source_File_Name (
       [Unit_Name   =>] unit_NAME,
       Body_File_Name =>  STRING_LITERAL);

Use this to override the normal naming convention.  It is a
configuration pragma, and so has the usual applicability of
configuration pragmas (i.e. it applies to either an entire partition,
or to all units in a compilation, or to a single unit, depending on how
it is used.  UNIT_NAME is mapped to FILE_NAME_LITERAL.  The identifier
for the second argument is required, and indicates whether this is the
file name for the spec or for the body.

   Another form of the `Source_File_Name' pragma allows the
specification of patterns defining alternative file naming schemes to
apply to all files.

     pragma Source_File_Name
       (Spec_File_Name => STRING_LITERAL
        [,Casing => CASING_SPEC]
        [,Dot_Replacement => STRING_LITERAL]);

     pragma Source_File_Name
       (Body_File_Name => STRING_LITERAL
        [,Casing => CASING_SPEC]
        [,Dot_Replacement => STRING_LITERAL]);

     pragma Source_File_Name
       (Subunit_File_Name => STRING_LITERAL
        [,Casing => CASING_SPEC]
        [,Dot_Replacement => STRING_LITERAL]);

     CASING_SPEC ::= Lowercase | Uppercase | Mixedcase

The first argument is a pattern that contains a single asterisk
indicating the point at which the unit name is to be inserted in the
pattern string to form the file name.  The second argument is optional.
If present it specifies the casing of the unit name in the resulting
file name string.  The default is lower case.  Finally the third
argument allows for systematic replacement of any dots in the unit name
by the specified string literal.

   A pragma Source_File_Name cannot appear after a *Note Pragma
Source_File_Name_Project::.

   For more details on the use of the `Source_File_Name' pragma, see
the sections "Using Other File Names" and "Alternative File Naming
Schemes" in the `GNAT User's Guide'.


File: gnat_rm.info,  Node: Pragma Source_File_Name_Project,  Next: Pragma Source_Reference,  Prev: Pragma Source_File_Name,  Up: Implementation Defined Pragmas

Pragma Source_File_Name_Project
===============================

This pragma has the same syntax and semantics as pragma
Source_File_Name.  It is only allowed as a stand alone configuration
pragma.  It cannot appear after a *Note Pragma Source_File_Name::, and
most importantly, once pragma Source_File_Name_Project appears, no
further Source_File_Name pragmas are allowed.

   The intention is that Source_File_Name_Project pragmas are always
generated by the Project Manager in a manner consistent with the naming
specified in a project file, and when naming is controlled in this
manner, it is not permissible to attempt to modify this naming scheme
using Source_File_Name pragmas (which would not be known to the project
manager).


File: gnat_rm.info,  Node: Pragma Source_Reference,  Next: Pragma Stream_Convert,  Prev: Pragma Source_File_Name_Project,  Up: Implementation Defined Pragmas

Pragma Source_Reference
=======================

Syntax:

     pragma Source_Reference (INTEGER_LITERAL, STRING_LITERAL);

This pragma must appear as the first line of a source file.
INTEGER_LITERAL is the logical line number of the line following the
pragma line (for use in error messages and debugging information).
STRING_LITERAL is a static string constant that specifies the file name
to be used in error messages and debugging information.  This is most
notably used for the output of `gnatchop' with the `-r' switch, to make
sure that the original unchopped source file is the one referred to.

   The second argument must be a string literal, it cannot be a static
string expression other than a string literal.  This is because its
value is needed for error messages issued by all phases of the compiler.


File: gnat_rm.info,  Node: Pragma Stream_Convert,  Next: Pragma Style_Checks,  Prev: Pragma Source_Reference,  Up: Implementation Defined Pragmas

Pragma Stream_Convert
=====================

Syntax:

     pragma Stream_Convert (
       [Entity =>] type_local_NAME,
       [Read   =>] function_NAME,
       [Write  =>] function_NAME);

This pragma provides an efficient way of providing stream functions for
types defined in packages.  Not only is it simpler to use than declaring
the necessary functions with attribute representation clauses, but more
significantly, it allows the declaration to made in such a way that the
stream packages are not loaded unless they are needed.  The use of the
Stream_Convert pragma adds no overhead at all, unless the stream
attributes are actually used on the designated type.

   The first argument specifies the type for which stream functions are
provided.  The second parameter provides a function used to read values
of this type.  It must name a function whose argument type may be any
subtype, and whose returned type must be the type given as the first
argument to the pragma.

   The meaning of the READ parameter is that if a stream attribute
directly or indirectly specifies reading of the type given as the first
parameter, then a value of the type given as the argument to the Read
function is read from the stream, and then the Read function is used to
convert this to the required target type.

   Similarly the WRITE parameter specifies how to treat write attributes
that directly or indirectly apply to the type given as the first
parameter.  It must have an input parameter of the type specified by
the first parameter, and the return type must be the same as the input
type of the Read function.  The effect is to first call the Write
function to convert to the given stream type, and then write the result
type to the stream.

   The Read and Write functions must not be overloaded subprograms.  If
necessary renamings can be supplied to meet this requirement.  The
usage of this attribute is best illustrated by a simple example, taken
from the GNAT implementation of package Ada.Strings.Unbounded:

     function To_Unbounded (S : String)
                return Unbounded_String
       renames To_Unbounded_String;

     pragma Stream_Convert
       (Unbounded_String, To_Unbounded, To_String);

The specifications of the referenced functions, as given in the Ada 95
Reference Manual are:

     function To_Unbounded_String (Source : String)
       return Unbounded_String;

     function To_String (Source : Unbounded_String)
       return String;

The effect is that if the value of an unbounded string is written to a
stream, then the representation of the item in the stream is in the same
format used for `Standard.String', and this same representation is
expected when a value of this type is read from the stream.


File: gnat_rm.info,  Node: Pragma Style_Checks,  Next: Pragma Subtitle,  Prev: Pragma Stream_Convert,  Up: Implementation Defined Pragmas

Pragma Style_Checks
===================

Syntax:

     pragma Style_Checks (string_LITERAL | ALL_CHECKS |
                          On | Off [, local_NAME]);

This pragma is used in conjunction with compiler switches to control the
built in style checking provided by GNAT.  The compiler switches, if
set, provide an initial setting for the switches, and this pragma may
be used to modify these settings, or the settings may be provided
entirely by the use of the pragma.  This pragma can be used anywhere
that a pragma is legal, including use as a configuration pragma
(including use in the `gnat.adc' file).

   The form with a string literal specifies which style options are to
be activated.  These are additive, so they apply in addition to any
previously set style check options.  The codes for the options are the
same as those used in the `-gnaty' switch to `gcc' or `gnatmake'.  For
example the following two methods can be used to enable layout checking:

   *      pragma Style_Checks ("l");

   *      gcc -c -gnatyl ...

The form ALL_CHECKS activates all standard checks (its use is equivalent
to the use of the `gnaty' switch with no options.  See GNAT User's
Guide for details.

   The forms with `Off' and `On' can be used to temporarily disable
style checks as shown in the following example:

     pragma Style_Checks ("k"); -- requires keywords in lower case
     pragma Style_Checks (Off); -- turn off style checks
     NULL;                      -- this will not generate an error message
     pragma Style_Checks (On);  -- turn style checks back on
     NULL;                      -- this will generate an error message

Finally the two argument form is allowed only if the first argument is
`On' or `Off'.  The effect is to turn of semantic style checks for the
specified entity, as shown in the following example:

     pragma Style_Checks ("r"); -- require consistency of identifier casing
     Arg : Integer;
     Rf1 : Integer := ARG;      -- incorrect, wrong case
     pragma Style_Checks (Off, Arg);
     Rf2 : Integer := ARG;      -- OK, no error


File: gnat_rm.info,  Node: Pragma Subtitle,  Next: Pragma Suppress_All,  Prev: Pragma Style_Checks,  Up: Implementation Defined Pragmas

Pragma Subtitle
===============

Syntax:

     pragma Subtitle ([Subtitle =>] STRING_LITERAL);

This pragma is recognized for compatibility with other Ada compilers
but is ignored by GNAT.


File: gnat_rm.info,  Node: Pragma Suppress_All,  Next: Pragma Suppress_Exception_Locations,  Prev: Pragma Subtitle,  Up: Implementation Defined Pragmas

Pragma Suppress_All
===================

Syntax:

     pragma Suppress_All;

This pragma can only appear immediately following a compilation unit.
The effect is to apply `Suppress (All_Checks)' to the unit which it
follows.  This pragma is implemented for compatibility with DEC Ada 83
usage.  The use of pragma `Suppress (All_Checks)' as a normal
configuration pragma is the preferred usage in GNAT.


File: gnat_rm.info,  Node: Pragma Suppress_Exception_Locations,  Next: Pragma Suppress_Initialization,  Prev: Pragma Suppress_All,  Up: Implementation Defined Pragmas

Pragma Suppress_Exception_Locations
===================================

Syntax:

     pragma Suppress_Exception_Locations;

In normal mode, a raise statement for an exception by default generates
an exception message giving the file name and line number for the
location of the raise. This is useful for debugging and logging
purposes, but this entails extra space for the strings for the
messages. The configuration pragma `Suppress_Exception_Locations' can
be used to suppress the generation of these strings, with the result
that space is saved, but the exception message for such raises is null.
This configuration pragma may appear in a global configuration pragma
file, or in a specific unit as usual. It is not required that this
pragma be used consistently within a partition, so it is fine to have
some units within a partition compiled with this pragma and others
compiled in normal mode without it.


File: gnat_rm.info,  Node: Pragma Suppress_Initialization,  Next: Pragma Task_Info,  Prev: Pragma Suppress_Exception_Locations,  Up: Implementation Defined Pragmas

Pragma Suppress_Initialization
==============================

Syntax:

     pragma Suppress_Initialization ([Entity =>] type_Name);

This pragma suppresses any implicit or explicit initialization
associated with the given type name for all variables of this type.


File: gnat_rm.info,  Node: Pragma Task_Info,  Next: Pragma Task_Name,  Prev: Pragma Suppress_Initialization,  Up: Implementation Defined Pragmas

Pragma Task_Info
================

Syntax

     pragma Task_Info (EXPRESSION);

This pragma appears within a task definition (like pragma `Priority')
and applies to the task in which it appears.  The argument must be of
type `System.Task_Info.Task_Info_Type'.  The `Task_Info' pragma
provides system dependent control over aspects of tasking
implementation, for example, the ability to map tasks to specific
processors.  For details on the facilities available for the version of
GNAT that you are using, see the documentation in the specification of
package System.Task_Info in the runtime library.


File: gnat_rm.info,  Node: Pragma Task_Name,  Next: Pragma Task_Storage,  Prev: Pragma Task_Info,  Up: Implementation Defined Pragmas

Pragma Task_Name
================

Syntax

     pragma Task_Name (string_EXPRESSION);

This pragma appears within a task definition (like pragma `Priority')
and applies to the task in which it appears.  The argument must be of
type String, and provides a name to be used for the task instance when
the task is created.  Note that this expression is not required to be
static, and in particular, it can contain references to task
discriminants.  This facility can be used to provide different names
for different tasks as they are created, as illustrated in the example
below.

   The task name is recorded internally in the run-time structures and
is accessible to tools like the debugger.  In addition the routine
`Ada.Task_Identification.Image' will return this string, with a unique
task address appended.

     --  Example of the use of pragma Task_Name

     with Ada.Task_Identification;
     use Ada.Task_Identification;
     with Text_IO; use Text_IO;
     procedure t3 is

        type Astring is access String;

        task type Task_Typ (Name : access String) is
           pragma Task_Name (Name.all);
        end Task_Typ;

        task body Task_Typ is
           Nam : constant String := Image (Current_Task);
        begin
           Put_Line ("-->" & Nam (1 .. 14) & "<--");
        end Task_Typ;

        type Ptr_Task is access Task_Typ;
        Task_Var : Ptr_Task;

     begin
        Task_Var :=
          new Task_Typ (new String'("This is task 1"));
        Task_Var :=
          new Task_Typ (new String'("This is task 2"));
     end;


File: gnat_rm.info,  Node: Pragma Task_Storage,  Next: Pragma Thread_Body,  Prev: Pragma Task_Name,  Up: Implementation Defined Pragmas

Pragma Task_Storage
===================

Syntax:

     pragma Task_Storage (
       [Task_Type =>] local_NAME,
       [Top_Guard =>] static_integer_EXPRESSION);

This pragma specifies the length of the guard area for tasks.  The guard
area is an additional storage area allocated to a task.  A value of zero
means that either no guard area is created or a minimal guard area is
created, depending on the target.  This pragma can appear anywhere a
`Storage_Size' attribute definition clause is allowed for a task type.


File: gnat_rm.info,  Node: Pragma Thread_Body,  Next: Pragma Time_Slice,  Prev: Pragma Task_Storage,  Up: Implementation Defined Pragmas

Pragma Thread_Body
==================

Syntax:

     pragma Thread_Body (
       [Entity =>] local_NAME,
      [[Secondary_Stack_Size =>] static_integer_EXPRESSION)];

This pragma specifies that the subprogram whose name is given as the
`Entity' argument is a thread body, which will be activated by being
called via its Address from foreign code. The purpose is to allow
execution and registration of the foreign thread within the Ada
run-time system.

   See the library unit `System.Threads' for details on the expansion of
a thread body subprogram, including the calls made to subprograms
within System.Threads to register the task.  This unit also lists the
targets and runtime systems for which this pragma is supported.

   A thread body subprogram may not be called directly from Ada code,
and it is not permitted to apply the Access (or Unrestricted_Access)
attributes to such a subprogram. The only legitimate way of calling
such a subprogram is to pass its Address to foreign code and then make
the call from the foreign code.

   A thread body subprogram may have any parameters, and it may be a
function returning a result. The convention of the thread body
subprogram may be set in the usual manner using `pragma Convention'.

   The secondary stack size parameter, if given, is used to set the size
of secondary stack for the thread. The secondary stack is allocated as
a local variable of the expanded thread body subprogram, and thus is
allocated out of the main thread stack size. If no secondary stack size
parameter is present, the default size (from the declaration in
`System.Secondary_Stack' is used.


File: gnat_rm.info,  Node: Pragma Time_Slice,  Next: Pragma Title,  Prev: Pragma Thread_Body,  Up: Implementation Defined Pragmas

Pragma Time_Slice
=================

Syntax:

     pragma Time_Slice (static_duration_EXPRESSION);

For implementations of GNAT on operating systems where it is possible
to supply a time slice value, this pragma may be used for this purpose.
It is ignored if it is used in a system that does not allow this
control, or if it appears in other than the main program unit.  Note
that the effect of this pragma is identical to the effect of the DEC
Ada 83 pragma of the same name when operating under OpenVMS systems.


File: gnat_rm.info,  Node: Pragma Title,  Next: Pragma Unchecked_Union,  Prev: Pragma Time_Slice,  Up: Implementation Defined Pragmas

Pragma Title
============

Syntax:

     pragma Title (TITLING_OPTION [, TITLING OPTION]);

     TITLING_OPTION ::=
       [Title    =>] STRING_LITERAL,
     | [Subtitle =>] STRING_LITERAL

Syntax checked but otherwise ignored by GNAT.  This is a listing control
pragma used in DEC Ada 83 implementations to provide a title and/or
subtitle for the program listing.  The program listing generated by GNAT
does not have titles or subtitles.

   Unlike other pragmas, the full flexibility of named notation is
allowed for this pragma, i.e. the parameters may be given in any order
if named notation is used, and named and positional notation can be
mixed following the normal rules for procedure calls in Ada.


File: gnat_rm.info,  Node: Pragma Unchecked_Union,  Next: Pragma Unimplemented_Unit,  Prev: Pragma Title,  Up: Implementation Defined Pragmas

Pragma Unchecked_Union
======================

Syntax:

     pragma Unchecked_Union (first_subtype_local_NAME);

This pragma is used to declare that the specified type should be
represented in a manner equivalent to a C union type, and is intended
only for use in interfacing with C code that uses union types.  In Ada
terms, the named type must obey the following rules:

   * It is a non-tagged non-limited record type.

   * It has a single discrete discriminant with a default value.

   * The component list consists of a single variant part.

   * Each variant has a component list with a single component.

   * No nested variants are allowed.

   * No component has an explicit default value.

   * No component has a non-static constraint.

In addition, given a type that meets the above requirements, the
following restrictions apply to its use throughout the program:

   * The discriminant name can be mentioned only in an aggregate.

   * No subtypes may be created of this type.

   * The type may not be constrained by giving a discriminant value.

   * The type cannot be passed as the actual for a generic formal with a
     discriminant.

Equality and inequality operations on `unchecked_unions' are not
available, since there is no discriminant to compare and the compiler
does not even know how many bits to compare.  It is implementation
dependent whether this is detected at compile time as an illegality or
whether it is undetected and considered to be an erroneous construct.
In GNAT, a direct comparison is illegal, but GNAT does not attempt to
catch the composite case (where two composites are compared that
contain an unchecked union component), so such comparisons are simply
considered erroneous.

   The layout of the resulting type corresponds exactly to a C union,
where each branch of the union corresponds to a single variant in the
Ada record.  The semantics of the Ada program is not changed in any way
by the pragma, i.e. provided the above restrictions are followed, and no
erroneous incorrect references to fields or erroneous comparisons occur,
the semantics is exactly as described by the Ada reference manual.
Pragma `Suppress (Discriminant_Check)' applies implicitly to the type
and the default convention is C.


File: gnat_rm.info,  Node: Pragma Unimplemented_Unit,  Next: Pragma Universal_Data,  Prev: Pragma Unchecked_Union,  Up: Implementation Defined Pragmas

Pragma Unimplemented_Unit
=========================

Syntax:

     pragma Unimplemented_Unit;

If this pragma occurs in a unit that is processed by the compiler, GNAT
aborts with the message `XXX not implemented', where XXX is the name of
the current compilation unit.  This pragma is intended to allow the
compiler to handle unimplemented library units in a clean manner.

   The abort only happens if code is being generated.  Thus you can use
specs of unimplemented packages in syntax or semantic checking mode.


File: gnat_rm.info,  Node: Pragma Universal_Data,  Next: Pragma Unreferenced,  Prev: Pragma Unimplemented_Unit,  Up: Implementation Defined Pragmas

Pragma Universal_Data
=====================

Syntax:

     pragma Universal_Data [(library_unit_Name)];

This pragma is supported only for the AAMP target and is ignored for
other targets. The pragma specifies that all library-level objects
(Counter 0 data) associated with the library unit are to be accessed
and updated using universal addressing (24-bit addresses for AAMP5)
rather than the default of 16-bit Data Environment (DENV) addressing.
Use of this pragma will generally result in less efficient code for
references to global data associated with the library unit, but allows
such data to be located anywhere in memory. This pragma is a library
unit pragma, but can also be used as a configuration pragma (including
use in the `gnat.adc' file). The functionality of this pragma is also
available by applying the -univ switch on the compilations of units
where universal addressing of the data is desired.


File: gnat_rm.info,  Node: Pragma Unreferenced,  Next: Pragma Unreserve_All_Interrupts,  Prev: Pragma Universal_Data,  Up: Implementation Defined Pragmas

Pragma Unreferenced
===================

Syntax:

     pragma Unreferenced (local_NAME {, local_NAME});

This pragma signals that the entities whose names are listed are
deliberately not referenced in the current source unit. This suppresses
warnings about the entities being unreferenced, and in addition a
warning will be generated if one of these entities is in fact
referenced in the same unit as the pragma (or in the corresponding
body, or one of its subunits).

   This is particularly useful for clearly signaling that a particular
parameter is not referenced in some particular subprogram implementation
and that this is deliberate. It can also be useful in the case of
objects declared only for their initialization or finalization side
effects.

   If `local_NAME' identifies more than one matching homonym in the
current scope, then the entity most recently declared is the one to
which the pragma applies.

   The left hand side of an assignment does not count as a reference
for the purpose of this pragma. Thus it is fine to assign to an entity
for which pragma Unreferenced is given.

   Note that if a warning is desired for all calls to a given
subprogram, regardless of whether they occur in the same unit as the
subprogram declaration, then this pragma should not be used (calls from
another unit would not be flagged); pragma Obsolescent can be used
instead for this purpose, see *Note Pragma Obsolescent::.


File: gnat_rm.info,  Node: Pragma Unreserve_All_Interrupts,  Next: Pragma Unsuppress,  Prev: Pragma Unreferenced,  Up: Implementation Defined Pragmas

Pragma Unreserve_All_Interrupts
===============================

Syntax:

     pragma Unreserve_All_Interrupts;

Normally certain interrupts are reserved to the implementation.  Any
attempt to attach an interrupt causes Program_Error to be raised, as
described in RM C.3.2(22).  A typical example is the `SIGINT' interrupt
used in many systems for a `Ctrl-C' interrupt.  Normally this interrupt
is reserved to the implementation, so that `Ctrl-C' can be used to
interrupt execution.

   If the pragma `Unreserve_All_Interrupts' appears anywhere in any
unit in a program, then all such interrupts are unreserved.  This
allows the program to handle these interrupts, but disables their
standard functions.  For example, if this pragma is used, then pressing
`Ctrl-C' will not automatically interrupt execution.  However, a
program can then handle the `SIGINT' interrupt as it chooses.

   For a full list of the interrupts handled in a specific
implementation, see the source code for the specification of
`Ada.Interrupts.Names' in file `a-intnam.ads'.  This is a target
dependent file that contains the list of interrupts recognized for a
given target.  The documentation in this file also specifies what
interrupts are affected by the use of the `Unreserve_All_Interrupts'
pragma.

   For a more general facility for controlling what interrupts can be
handled, see pragma `Interrupt_State', which subsumes the functionality
of the `Unreserve_All_Interrupts' pragma.


File: gnat_rm.info,  Node: Pragma Unsuppress,  Next: Pragma Use_VADS_Size,  Prev: Pragma Unreserve_All_Interrupts,  Up: Implementation Defined Pragmas

Pragma Unsuppress
=================

Syntax:

     pragma Unsuppress (IDENTIFIER [, [On =>] NAME]);

This pragma undoes the effect of a previous pragma `Suppress'.  If
there is no corresponding pragma `Suppress' in effect, it has no
effect.  The range of the effect is the same as for pragma `Suppress'.
The meaning of the arguments is identical to that used in pragma
`Suppress'.

   One important application is to ensure that checks are on in cases
where code depends on the checks for its correct functioning, so that
the code will compile correctly even if the compiler switches are set
to suppress checks.


File: gnat_rm.info,  Node: Pragma Use_VADS_Size,  Next: Pragma Validity_Checks,  Prev: Pragma Unsuppress,  Up: Implementation Defined Pragmas

Pragma Use_VADS_Size
====================

Syntax:

     pragma Use_VADS_Size;

This is a configuration pragma.  In a unit to which it applies, any use
of the 'Size attribute is automatically interpreted as a use of the
'VADS_Size attribute.  Note that this may result in incorrect semantic
processing of valid Ada 95 programs.  This is intended to aid in the
handling of legacy code which depends on the interpretation of Size as
implemented in the VADS compiler.  See description of the VADS_Size
attribute for further details.


File: gnat_rm.info,  Node: Pragma Validity_Checks,  Next: Pragma Volatile,  Prev: Pragma Use_VADS_Size,  Up: Implementation Defined Pragmas

Pragma Validity_Checks
======================

Syntax:

     pragma Validity_Checks (string_LITERAL | ALL_CHECKS | On | Off);

This pragma is used in conjunction with compiler switches to control the
built-in validity checking provided by GNAT.  The compiler switches, if
set provide an initial setting for the switches, and this pragma may be
used to modify these settings, or the settings may be provided entirely
by the use of the pragma.  This pragma can be used anywhere that a
pragma is legal, including use as a configuration pragma (including use
in the `gnat.adc' file).

   The form with a string literal specifies which validity options are
to be activated.  The validity checks are first set to include only the
default reference manual settings, and then a string of letters in the
string specifies the exact set of options required.  The form of this
string is exactly as described for the `-gnatVx' compiler switch (see
the GNAT users guide for details).  For example the following two
methods can be used to enable validity checking for mode `in' and `in
out' subprogram parameters:

   *      pragma Validity_Checks ("im");

   *      gcc -c -gnatVim ...

The form ALL_CHECKS activates all standard checks (its use is equivalent
to the use of the `gnatva' switch.

   The forms with `Off' and `On' can be used to temporarily disable
validity checks as shown in the following example:

     pragma Validity_Checks ("c"); -- validity checks for copies
     pragma Validity_Checks (Off); -- turn off validity checks
     A := B;                       -- B will not be validity checked
     pragma Validity_Checks (On);  -- turn validity checks back on
     A := C;                       -- C will be validity checked


File: gnat_rm.info,  Node: Pragma Volatile,  Next: Pragma Warnings,  Prev: Pragma Validity_Checks,  Up: Implementation Defined Pragmas

Pragma Volatile
===============

Syntax:

     pragma Volatile (local_NAME);

This pragma is defined by the Ada 95 Reference Manual, and the GNAT
implementation is fully conformant with this definition.  The reason it
is mentioned in this section is that a pragma of the same name was
supplied in some Ada 83 compilers, including DEC Ada 83.  The Ada 95
implementation of pragma Volatile is upwards compatible with the
implementation in Dec Ada 83.


File: gnat_rm.info,  Node: Pragma Warnings,  Next: Pragma Weak_External,  Prev: Pragma Volatile,  Up: Implementation Defined Pragmas

Pragma Warnings
===============

Syntax:

     pragma Warnings (On | Off [, local_NAME]);
     pragma Warnings (static_string_EXPRESSION);

Normally warnings are enabled, with the output being controlled by the
command line switch.  Warnings (`Off') turns off generation of warnings
until a Warnings (`On') is encountered or the end of the current unit.
If generation of warnings is turned off using this pragma, then no
warning messages are output, regardless of the setting of the command
line switches.

   The form with a single argument is a configuration pragma.

   If the LOCAL_NAME parameter is present, warnings are suppressed for
the specified entity.  This suppression is effective from the point
where it occurs till the end of the extended scope of the variable
(similar to the scope of `Suppress').

   The form with a static_string_EXPRESSION argument provides more
precise control over which warnings are active. The string is a list of
letters specifying which warnings are to be activated and which
deactivated. The code for these letters is the same as the string used
in the command line switch controlling warnings. The following is a
brief summary. For full details see the GNAT Users Guide:

     a   turn on all optional warnings (except d,h,l)
     A   turn off all optional warnings
     b   turn on warnings for bad fixed value (not multiple of small)
     B   turn off warnings for bad fixed value (not multiple of small)
     c   turn on warnings for constant conditional
     C   turn off warnings for constant conditional
     d   turn on warnings for implicit dereference
     D   turn off warnings for implicit dereference
     e   treat all warnings as errors
     f   turn on warnings for unreferenced formal
     F   turn off warnings for unreferenced formal
     g   turn on warnings for unrecognized pragma
     G   turn off warnings for unrecognized pragma
     h   turn on warnings for hiding variable
     H   turn off warnings for hiding variable
     i   turn on warnings for implementation unit
     I   turn off warnings for implementation unit
     j   turn on warnings for obsolescent (annex J) feature
     J   turn off warnings for obsolescent (annex J) feature
     k   turn on warnings on constant variable
     K   turn off warnings on constant variable
     l   turn on warnings for missing elaboration pragma
     L   turn off warnings for missing elaboration pragma
     m   turn on warnings for variable assigned but not read
     M   turn off warnings for variable assigned but not read
     n   normal warning mode (cancels s/e)
     o   turn on warnings for address clause overlay
     O   turn off warnings for address clause overlay
     p   turn on warnings for ineffective pragma Inline
     P   turn off warnings for ineffective pragma Inline
     r   turn on warnings for redundant construct
     R   turn off warnings for redundant construct
     s   suppress all warnings
     u   turn on warnings for unused entity
     U   turn off warnings for unused entity
     v   turn on warnings for unassigned variable
     V   turn off warnings for unassigned variable
     x   turn on warnings for export/import
     X   turn off warnings for export/import
     y   turn on warnings for Ada 2005 incompatibility
     Y   turn off warnings for Ada 2005 incompatibility
     z   turn on size/align warnings for unchecked conversion
     Z   turn off size/align warnings for unchecked conversion

The specified warnings will be in effect until the end of the program
or another pragma Warnings is encountered. The effect of the pragma is
cumulative. Initially the set of warnings is the standard default set
as possibly modified by compiler switches. Then each pragma Warning
modifies this set of warnings as specified.


File: gnat_rm.info,  Node: Pragma Weak_External,  Prev: Pragma Warnings,  Up: Implementation Defined Pragmas

Pragma Weak_External
====================

Syntax:

     pragma Weak_External ([Entity =>] local_NAME);

LOCAL_NAME must refer to an object that is declared at the library
level. This pragma specifies that the given entity should be marked as a
weak symbol for the linker. It is equivalent to `__attribute__((weak))'
in GNU C and causes LOCAL_NAME to be emitted as a weak symbol instead
of a regular symbol, that is to say a symbol that does not have to be
resolved by the linker if used in conjunction with a pragma Import.

   When a weak symbol is not resolved by the linker, its address is set
to zero. This is useful in writing interfaces to external modules that
may or may not be linked in the final executable, for example depending
on configuration settings.

   If a program references at run time an entity to which this pragma
has been applied, and the corresponding symbol was not resolved at link
time, then the execution of the program is erroneous. It is not
erroneous to take the Address of such an entity, for example to guard
potential references, as shown in the example below.

   Some file formats do not support weak symbols so not all target
machines support this pragma.

     --  Example of the use of pragma Weak_External

     package External_Module is
       key : Integer;
       pragma Import (C, key);
       pragma Weak_External (key);
       function Present return boolean;
     end External_Module;

     with System; use System;
     package body External_Module is
       function Present return boolean is
       begin
         return key'Address /= System.Null_Address;
       end Present;
     end External_Module;


File: gnat_rm.info,  Node: Implementation Defined Attributes,  Next: Implementation Advice,  Prev: Implementation Defined Pragmas,  Up: Top

2 Implementation Defined Attributes
***********************************

Ada 95 defines (throughout the Ada 95 reference manual, summarized in
annex K), a set of attributes that provide useful additional
functionality in all areas of the language.  These language defined
attributes are implemented in GNAT and work as described in the Ada 95
Reference Manual.

   In addition, Ada 95 allows implementations to define additional
attributes whose meaning is defined by the implementation.  GNAT
provides a number of these implementation-dependent attributes which
can be used to extend and enhance the functionality of the compiler.
This section of the GNAT reference manual describes these additional
attributes.

   Note that any program using these attributes may not be portable to
other compilers (although GNAT implements this set of attributes on all
platforms).  Therefore if portability to other compilers is an important
consideration, you should minimize the use of these attributes.

* Menu:

* Abort_Signal::
* Address_Size::
* Asm_Input::
* Asm_Output::
* AST_Entry::
* Bit::
* Bit_Position::
* Code_Address::
* Default_Bit_Order::
* Elaborated::
* Elab_Body::
* Elab_Spec::
* Emax::
* Enum_Rep::
* Epsilon::
* Fixed_Value::
* Has_Access_Values::
* Has_Discriminants::
* Img::
* Integer_Value::
* Large::
* Machine_Size::
* Mantissa::
* Max_Interrupt_Priority::
* Max_Priority::
* Maximum_Alignment::
* Mechanism_Code::
* Null_Parameter::
* Object_Size::
* Passed_By_Reference::
* Range_Length::
* Safe_Emax::
* Safe_Large::
* Small::
* Storage_Unit::
* Target_Name::
* Tick::
* To_Address::
* Type_Class::
* UET_Address::
* Unconstrained_Array::
* Universal_Literal_String::
* Unrestricted_Access::
* VADS_Size::
* Value_Size::
* Wchar_T_Size::
* Word_Size::


File: gnat_rm.info,  Node: Abort_Signal,  Next: Address_Size,  Up: Implementation Defined Attributes

Abort_Signal
============

`Standard'Abort_Signal' (`Standard' is the only allowed prefix)
provides the entity for the special exception used to signal task abort
or asynchronous transfer of control.  Normally this attribute should
only be used in the tasking runtime (it is highly peculiar, and
completely outside the normal semantics of Ada, for a user program to
intercept the abort exception).


File: gnat_rm.info,  Node: Address_Size,  Next: Asm_Input,  Prev: Abort_Signal,  Up: Implementation Defined Attributes

Address_Size
============

`Standard'Address_Size' (`Standard' is the only allowed prefix) is a
static constant giving the number of bits in an `Address'. It is the
same value as System.Address'Size, but has the advantage of being
static, while a direct reference to System.Address'Size is non-static
because Address is a private type.


File: gnat_rm.info,  Node: Asm_Input,  Next: Asm_Output,  Prev: Address_Size,  Up: Implementation Defined Attributes

Asm_Input
=========

The `Asm_Input' attribute denotes a function that takes two parameters.
The first is a string, the second is an expression of the type
designated by the prefix.  The first (string) argument is required to
be a static expression, and is the constraint for the parameter, (e.g.
what kind of register is required).  The second argument is the value
to be used as the input argument.  The possible values for the constant
are the same as those used in the RTL, and are dependent on the
configuration file used to built the GCC back end.  *Note Machine Code
Insertions::


File: gnat_rm.info,  Node: Asm_Output,  Next: AST_Entry,  Prev: Asm_Input,  Up: Implementation Defined Attributes

Asm_Output
==========

The `Asm_Output' attribute denotes a function that takes two
parameters.  The first is a string, the second is the name of a variable
of the type designated by the attribute prefix.  The first (string)
argument is required to be a static expression and designates the
constraint for the parameter (e.g. what kind of register is required).
The second argument is the variable to be updated with the result.  The
possible values for constraint are the same as those used in the RTL,
and are dependent on the configuration file used to build the GCC back
end.  If there are no output operands, then this argument may either be
omitted, or explicitly given as `No_Output_Operands'.  *Note Machine
Code Insertions::


File: gnat_rm.info,  Node: AST_Entry,  Next: Bit,  Prev: Asm_Output,  Up: Implementation Defined Attributes

AST_Entry
=========

This attribute is implemented only in OpenVMS versions of GNAT.
Applied to the name of an entry, it yields a value of the predefined
type AST_Handler (declared in the predefined package System, as
extended by the use of pragma `Extend_System (Aux_DEC)').  This value
enables the given entry to be called when an AST occurs.  For further
details, refer to the `DEC Ada Language Reference Manual', section
9.12a.


File: gnat_rm.info,  Node: Bit,  Next: Bit_Position,  Prev: AST_Entry,  Up: Implementation Defined Attributes

Bit
===

`OBJ'Bit', where OBJ is any object, yields the bit offset within the
storage unit (byte) that contains the first bit of storage allocated
for the object.  The value of this attribute is of the type
`Universal_Integer', and is always a non-negative number not exceeding
the value of `System.Storage_Unit'.

   For an object that is a variable or a constant allocated in a
register, the value is zero.  (The use of this attribute does not force
the allocation of a variable to memory).

   For an object that is a formal parameter, this attribute applies to
either the matching actual parameter or to a copy of the matching
actual parameter.

   For an access object the value is zero.  Note that `OBJ.all'Bit' is
subject to an `Access_Check' for the designated object.  Similarly for
a record component `X.C'Bit' is subject to a discriminant check and
`X(I).Bit' and `X(I1..I2)'Bit' are subject to index checks.

   This attribute is designed to be compatible with the DEC Ada 83
definition and implementation of the `Bit' attribute.


File: gnat_rm.info,  Node: Bit_Position,  Next: Code_Address,  Prev: Bit,  Up: Implementation Defined Attributes

Bit_Position
============

`R.C'Bit', where R is a record object and C is one of the fields of the
record type, yields the bit offset within the record contains the first
bit of storage allocated for the object.  The value of this attribute
is of the type `Universal_Integer'.  The value depends only on the field
C and is independent of the alignment of the containing record R.


File: gnat_rm.info,  Node: Code_Address,  Next: Default_Bit_Order,  Prev: Bit_Position,  Up: Implementation Defined Attributes

Code_Address
============

The `'Address' attribute may be applied to subprograms in Ada 95, but
the intended effect from the Ada 95 reference manual seems to be to
provide an address value which can be used to call the subprogram by
means of an address clause as in the following example:

     procedure K is ...

     procedure L;
     for L'Address use K'Address;
     pragma Import (Ada, L);

A call to `L' is then expected to result in a call to `K'.  In Ada 83,
where there were no access-to-subprogram values, this was a common work
around for getting the effect of an indirect call.  GNAT implements the
above use of `Address' and the technique illustrated by the example
code works correctly.

   However, for some purposes, it is useful to have the address of the
start of the generated code for the subprogram.  On some architectures,
this is not necessarily the same as the `Address' value described above.
For example, the `Address' value may reference a subprogram descriptor
rather than the subprogram itself.

   The `'Code_Address' attribute, which can only be applied to
subprogram entities, always returns the address of the start of the
generated code of the specified subprogram, which may or may not be the
same value as is returned by the corresponding `'Address' attribute.


File: gnat_rm.info,  Node: Default_Bit_Order,  Next: Elaborated,  Prev: Code_Address,  Up: Implementation Defined Attributes

Default_Bit_Order
=================

`Standard'Default_Bit_Order' (`Standard' is the only permissible
prefix), provides the value `System.Default_Bit_Order' as a `Pos' value
(0 for `High_Order_First', 1 for `Low_Order_First').  This is used to
construct the definition of `Default_Bit_Order' in package `System'.


File: gnat_rm.info,  Node: Elaborated,  Next: Elab_Body,  Prev: Default_Bit_Order,  Up: Implementation Defined Attributes

Elaborated
==========

The prefix of the `'Elaborated' attribute must be a unit name.  The
value is a Boolean which indicates whether or not the given unit has
been elaborated.  This attribute is primarily intended for internal use
by the generated code for dynamic elaboration checking, but it can also
be used in user programs.  The value will always be True once
elaboration of all units has been completed.  An exception is for units
which need no elaboration, the value is always False for such units.


File: gnat_rm.info,  Node: Elab_Body,  Next: Elab_Spec,  Prev: Elaborated,  Up: Implementation Defined Attributes

Elab_Body
=========

This attribute can only be applied to a program unit name.  It returns
the entity for the corresponding elaboration procedure for elaborating
the body of the referenced unit.  This is used in the main generated
elaboration procedure by the binder and is not normally used in any
other context.  However, there may be specialized situations in which it
is useful to be able to call this elaboration procedure from Ada code,
e.g. if it is necessary to do selective re-elaboration to fix some
error.


File: gnat_rm.info,  Node: Elab_Spec,  Next: Emax,  Prev: Elab_Body,  Up: Implementation Defined Attributes

Elab_Spec
=========

This attribute can only be applied to a program unit name.  It returns
the entity for the corresponding elaboration procedure for elaborating
the specification of the referenced unit.  This is used in the main
generated elaboration procedure by the binder and is not normally used
in any other context.  However, there may be specialized situations in
which it is useful to be able to call this elaboration procedure from
Ada code, e.g. if it is necessary to do selective re-elaboration to fix
some error.


File: gnat_rm.info,  Node: Emax,  Next: Enum_Rep,  Prev: Elab_Spec,  Up: Implementation Defined Attributes

Emax
====

The `Emax' attribute is provided for compatibility with Ada 83.  See
the Ada 83 reference manual for an exact description of the semantics of
this attribute.


File: gnat_rm.info,  Node: Enum_Rep,  Next: Epsilon,  Prev: Emax,  Up: Implementation Defined Attributes

Enum_Rep
========

For every enumeration subtype S, `S'Enum_Rep' denotes a function with
the following spec:

     function S'Enum_Rep (Arg : S'Base)
       return Universal_Integer;

It is also allowable to apply `Enum_Rep' directly to an object of an
enumeration type or to a non-overloaded enumeration literal.  In this
case `S'Enum_Rep' is equivalent to `TYP'Enum_Rep(S)' where TYP is the
type of the enumeration literal or object.

   The function returns the representation value for the given
enumeration value.  This will be equal to value of the `Pos' attribute
in the absence of an enumeration representation clause.  This is a
static attribute (i.e. the result is static if the argument is static).

   `S'Enum_Rep' can also be used with integer types and objects, in
which case it simply returns the integer value.  The reason for this is
to allow it to be used for `(<>)' discrete formal arguments in a
generic unit that can be instantiated with either enumeration types or
integer types.  Note that if `Enum_Rep' is used on a modular type whose
upper bound exceeds the upper bound of the largest signed integer type,
and the argument is a variable, so that the universal integer
calculation is done at run-time, then the call to `Enum_Rep' may raise
`Constraint_Error'.


File: gnat_rm.info,  Node: Epsilon,  Next: Fixed_Value,  Prev: Enum_Rep,  Up: Implementation Defined Attributes

Epsilon
=======

The `Epsilon' attribute is provided for compatibility with Ada 83.  See
the Ada 83 reference manual for an exact description of the semantics of
this attribute.


File: gnat_rm.info,  Node: Fixed_Value,  Next: Has_Access_Values,  Prev: Epsilon,  Up: Implementation Defined Attributes

Fixed_Value
===========

For every fixed-point type S, `S'Fixed_Value' denotes a function with
the following specification:

     function S'Fixed_Value (Arg : Universal_Integer)
       return S;

The value returned is the fixed-point value V such that

     V = Arg * S'Small

The effect is thus similar to first converting the argument to the
integer type used to represent S, and then doing an unchecked
conversion to the fixed-point type.  The difference is that there are
full range checks, to ensure that the result is in range.  This
attribute is primarily intended for use in implementation of the
input-output functions for fixed-point values.


File: gnat_rm.info,  Node: Has_Access_Values,  Next: Has_Discriminants,  Prev: Fixed_Value,  Up: Implementation Defined Attributes

Has_Access_Values
=================

The prefix of the `Has_Access_Values' attribute is a type.  The result
is a Boolean value which is True if the is an access type, or is a
composite type with a component (at any nesting depth) that is an
access type, and is False otherwise.  The intended use of this
attribute is in conjunction with generic definitions.  If the attribute
is applied to a generic private type, it indicates whether or not the
corresponding actual type has access values.


File: gnat_rm.info,  Node: Has_Discriminants,  Next: Img,  Prev: Has_Access_Values,  Up: Implementation Defined Attributes

Has_Discriminants
=================

The prefix of the `Has_Discriminants' attribute is a type.  The result
is a Boolean value which is True if the type has discriminants, and
False otherwise.  The intended use of this attribute is in conjunction
with generic definitions.  If the attribute is applied to a generic
private type, it indicates whether or not the corresponding actual type
has discriminants.


File: gnat_rm.info,  Node: Img,  Next: Integer_Value,  Prev: Has_Discriminants,  Up: Implementation Defined Attributes

Img
===

The `Img' attribute differs from `Image' in that it may be applied to
objects as well as types, in which case it gives the `Image' for the
subtype of the object.  This is convenient for debugging:

     Put_Line ("X = " & X'Img);

has the same meaning as the more verbose:

     Put_Line ("X = " & T'Image (X));

where T is the (sub)type of the object `X'.


File: gnat_rm.info,  Node: Integer_Value,  Next: Large,  Prev: Img,  Up: Implementation Defined Attributes

Integer_Value
=============

For every integer type S, `S'Integer_Value' denotes a function with the
following spec:

     function S'Integer_Value (Arg : Universal_Fixed)
       return S;

The value returned is the integer value V, such that

     Arg = V * T'Small

where T is the type of `Arg'.  The effect is thus similar to first
doing an unchecked conversion from the fixed-point type to its
corresponding implementation type, and then converting the result to
the target integer type.  The difference is that there are full range
checks, to ensure that the result is in range.  This attribute is
primarily intended for use in implementation of the standard
input-output functions for fixed-point values.


File: gnat_rm.info,  Node: Large,  Next: Machine_Size,  Prev: Integer_Value,  Up: Implementation Defined Attributes

Large
=====

The `Large' attribute is provided for compatibility with Ada 83.  See
the Ada 83 reference manual for an exact description of the semantics of
this attribute.


File: gnat_rm.info,  Node: Machine_Size,  Next: Mantissa,  Prev: Large,  Up: Implementation Defined Attributes

Machine_Size
============

This attribute is identical to the `Object_Size' attribute.  It is
provided for compatibility with the DEC Ada 83 attribute of this name.


File: gnat_rm.info,  Node: Mantissa,  Next: Max_Interrupt_Priority,  Prev: Machine_Size,  Up: Implementation Defined Attributes

Mantissa
========

The `Mantissa' attribute is provided for compatibility with Ada 83.  See
the Ada 83 reference manual for an exact description of the semantics of
this attribute.


File: gnat_rm.info,  Node: Max_Interrupt_Priority,  Next: Max_Priority,  Prev: Mantissa,  Up: Implementation Defined Attributes

Max_Interrupt_Priority
======================

`Standard'Max_Interrupt_Priority' (`Standard' is the only permissible
prefix), provides the same value as `System.Max_Interrupt_Priority'.


File: gnat_rm.info,  Node: Max_Priority,  Next: Maximum_Alignment,  Prev: Max_Interrupt_Priority,  Up: Implementation Defined Attributes

Max_Priority
============

`Standard'Max_Priority' (`Standard' is the only permissible prefix)
provides the same value as `System.Max_Priority'.


File: gnat_rm.info,  Node: Maximum_Alignment,  Next: Mechanism_Code,  Prev: Max_Priority,  Up: Implementation Defined Attributes

Maximum_Alignment
=================

`Standard'Maximum_Alignment' (`Standard' is the only permissible
prefix) provides the maximum useful alignment value for the target.
This is a static value that can be used to specify the alignment for an
object, guaranteeing that it is properly aligned in all cases.


File: gnat_rm.info,  Node: Mechanism_Code,  Next: Null_Parameter,  Prev: Maximum_Alignment,  Up: Implementation Defined Attributes

Mechanism_Code
==============

`FUNCTION'Mechanism_Code' yields an integer code for the mechanism used
for the result of function, and `SUBPROGRAM'Mechanism_Code (N)' yields
the mechanism used for formal parameter number N (a static integer
value with 1 meaning the first parameter) of SUBPROGRAM.  The code
returned is:

1
     by copy (value)

2
     by reference

3
     by descriptor (default descriptor class)

4
     by descriptor (UBS: unaligned bit string)

5
     by descriptor (UBSB: aligned bit string with arbitrary bounds)

6
     by descriptor (UBA: unaligned bit array)

7
     by descriptor (S: string, also scalar access type parameter)

8
     by descriptor (SB: string with arbitrary bounds)

9
     by descriptor (A: contiguous array)

10
     by descriptor (NCA: non-contiguous array)

Values from 3 through 10 are only relevant to Digital OpenVMS
implementations.  


File: gnat_rm.info,  Node: Null_Parameter,  Next: Object_Size,  Prev: Mechanism_Code,  Up: Implementation Defined Attributes

Null_Parameter
==============

A reference `T'Null_Parameter' denotes an imaginary object of type or
subtype T allocated at machine address zero.  The attribute is allowed
only as the default expression of a formal parameter, or as an actual
expression of a subprogram call.  In either case, the subprogram must
be imported.

   The identity of the object is represented by the address zero in the
argument list, independent of the passing mechanism (explicit or
default).

   This capability is needed to specify that a zero address should be
passed for a record or other composite object passed by reference.
There is no way of indicating this without the `Null_Parameter'
attribute.


File: gnat_rm.info,  Node: Object_Size,  Next: Passed_By_Reference,  Prev: Null_Parameter,  Up: Implementation Defined Attributes

Object_Size
===========

The size of an object is not necessarily the same as the size of the
type of an object.  This is because by default object sizes are
increased to be a multiple of the alignment of the object.  For example,
`Natural'Size' is 31, but by default objects of type `Natural' will
have a size of 32 bits.  Similarly, a record containing an integer and
a character:

     type Rec is record
        I : Integer;
        C : Character;
     end record;

will have a size of 40 (that is `Rec'Size' will be 40.  The alignment
will be 4, because of the integer field, and so the default size of
record objects for this type will be 64 (8 bytes).

   The `TYPE'Object_Size' attribute has been added to GNAT to allow the
default object size of a type to be easily determined.  For example,
`Natural'Object_Size' is 32, and `Rec'Object_Size' (for the record type
in the above example) will be 64.  Note also that, unlike the situation
with the `Size' attribute as defined in the Ada RM, the `Object_Size'
attribute can be specified individually for different subtypes.  For
example:

     type R is new Integer;
     subtype R1 is R range 1 .. 10;
     subtype R2 is R range 1 .. 10;
     for R2'Object_Size use 8;

In this example, `R'Object_Size' and `R1'Object_Size' are both 32 since
the default object size for a subtype is the same as the object size
for the parent subtype.  This means that objects of type `R' or `R1'
will by default be 32 bits (four bytes).  But objects of type `R2' will
be only 8 bits (one byte), since `R2'Object_Size' has been set to 8.


File: gnat_rm.info,  Node: Passed_By_Reference,  Next: Range_Length,  Prev: Object_Size,  Up: Implementation Defined Attributes

Passed_By_Reference
===================

`TYPE'Passed_By_Reference' for any subtype TYPE returns a value of type
`Boolean' value that is `True' if the type is normally passed by
reference and `False' if the type is normally passed by copy in calls.
For scalar types, the result is always `False' and is static.  For
non-scalar types, the result is non-static.


File: gnat_rm.info,  Node: Range_Length,  Next: Safe_Emax,  Prev: Passed_By_Reference,  Up: Implementation Defined Attributes

Range_Length
============

`TYPE'Range_Length' for any discrete type TYPE yields the number of
values represented by the subtype (zero for a null range).  The result
is static for static subtypes.  `Range_Length' applied to the index
subtype of a one dimensional array always gives the same result as
`Range' applied to the array itself.


File: gnat_rm.info,  Node: Safe_Emax,  Next: Safe_Large,  Prev: Range_Length,  Up: Implementation Defined Attributes

Safe_Emax
=========

The `Safe_Emax' attribute is provided for compatibility with Ada 83.
See the Ada 83 reference manual for an exact description of the
semantics of this attribute.


File: gnat_rm.info,  Node: Safe_Large,  Next: Small,  Prev: Safe_Emax,  Up: Implementation Defined Attributes

Safe_Large
==========

The `Safe_Large' attribute is provided for compatibility with Ada 83.
See the Ada 83 reference manual for an exact description of the
semantics of this attribute.


File: gnat_rm.info,  Node: Small,  Next: Storage_Unit,  Prev: Safe_Large,  Up: Implementation Defined Attributes

Small
=====

The `Small' attribute is defined in Ada 95 only for fixed-point types.
GNAT also allows this attribute to be applied to floating-point types
for compatibility with Ada 83.  See the Ada 83 reference manual for an
exact description of the semantics of this attribute when applied to
floating-point types.


File: gnat_rm.info,  Node: Storage_Unit,  Next: Target_Name,  Prev: Small,  Up: Implementation Defined Attributes

Storage_Unit
============

`Standard'Storage_Unit' (`Standard' is the only permissible prefix)
provides the same value as `System.Storage_Unit'.


File: gnat_rm.info,  Node: Target_Name,  Next: Tick,  Prev: Storage_Unit,  Up: Implementation Defined Attributes

Target_Name
===========

`Standard'Target_Name' (`Standard' is the only permissible prefix)
provides a static string value that identifies the target for the
current compilation. For GCC implementations, this is the standard gcc
target name without the terminating slash (for example, GNAT 5.0 on
windows yields "i586-pc-mingw32msv").


File: gnat_rm.info,  Node: Tick,  Next: To_Address,  Prev: Target_Name,  Up: Implementation Defined Attributes

Tick
====

`Standard'Tick' (`Standard' is the only permissible prefix) provides
the same value as `System.Tick',


File: gnat_rm.info,  Node: To_Address,  Next: Type_Class,  Prev: Tick,  Up: Implementation Defined Attributes

To_Address
==========

The `System'To_Address' (`System' is the only permissible prefix)
denotes a function identical to `System.Storage_Elements.To_Address'
except that it is a static attribute.  This means that if its argument
is a static expression, then the result of the attribute is a static
expression.  The result is that such an expression can be used in
contexts (e.g. preelaborable packages) which require a static
expression and where the function call could not be used (since the
function call is always non-static, even if its argument is static).


File: gnat_rm.info,  Node: Type_Class,  Next: UET_Address,  Prev: To_Address,  Up: Implementation Defined Attributes

Type_Class
==========

`TYPE'Type_Class' for any type or subtype TYPE yields the value of the
type class for the full type of TYPE.  If TYPE is a generic formal
type, the value is the value for the corresponding actual subtype.  The
value of this attribute is of type `System.Aux_DEC.Type_Class', which
has the following definition:

       type Type_Class is
         (Type_Class_Enumeration,
          Type_Class_Integer,
          Type_Class_Fixed_Point,
          Type_Class_Floating_Point,
          Type_Class_Array,
          Type_Class_Record,
          Type_Class_Access,
          Type_Class_Task,
          Type_Class_Address);

Protected types yield the value `Type_Class_Task', which thus applies
to all concurrent types.  This attribute is designed to be compatible
with the DEC Ada 83 attribute of the same name.


File: gnat_rm.info,  Node: UET_Address,  Next: Unconstrained_Array,  Prev: Type_Class,  Up: Implementation Defined Attributes

UET_Address
===========

The `UET_Address' attribute can only be used for a prefix which denotes
a library package.  It yields the address of the unit exception table
when zero cost exception handling is used.  This attribute is intended
only for use within the GNAT implementation.  See the unit
`Ada.Exceptions' in files `a-except.ads' and `a-except.adb' for details
on how this attribute is used in the implementation.


File: gnat_rm.info,  Node: Unconstrained_Array,  Next: Universal_Literal_String,  Prev: UET_Address,  Up: Implementation Defined Attributes

Unconstrained_Array
===================

The `Unconstrained_Array' attribute can be used with a prefix that
denotes any type or subtype. It is a static attribute that yields
`True' if the prefix designates an unconstrained array, and `False'
otherwise. In a generic instance, the result is still static, and
yields the result of applying this test to the generic actual.


File: gnat_rm.info,  Node: Universal_Literal_String,  Next: Unrestricted_Access,  Prev: Unconstrained_Array,  Up: Implementation Defined Attributes

Universal_Literal_String
========================

The prefix of `Universal_Literal_String' must be a named number.  The
static result is the string consisting of the characters of the number
as defined in the original source.  This allows the user program to
access the actual text of named numbers without intermediate
conversions and without the need to enclose the strings in quotes (which
would preclude their use as numbers).  This is used internally for the
construction of values of the floating-point attributes from the file
`ttypef.ads', but may also be used by user programs.


File: gnat_rm.info,  Node: Unrestricted_Access,  Next: VADS_Size,  Prev: Universal_Literal_String,  Up: Implementation Defined Attributes

Unrestricted_Access
===================

The `Unrestricted_Access' attribute is similar to `Access' except that
all accessibility and aliased view checks are omitted.  This is a
user-beware attribute.  It is similar to `Address', for which it is a
desirable replacement where the value desired is an access type.  In
other words, its effect is identical to first applying the `Address'
attribute and then doing an unchecked conversion to a desired access
type.  In GNAT, but not necessarily in other implementations, the use
of static chains for inner level subprograms means that
`Unrestricted_Access' applied to a subprogram yields a value that can
be called as long as the subprogram is in scope (normal Ada 95
accessibility rules restrict this usage).

   It is possible to use `Unrestricted_Access' for any type, but care
must be exercised if it is used to create pointers to unconstrained
objects. In this case, the resulting pointer has the same scope as the
context of the attribute, and may not be returned to some enclosing
scope. For instance, a function cannot use `Unrestricted_Access' to
create a unconstrained pointer and then return that value to the caller.


File: gnat_rm.info,  Node: VADS_Size,  Next: Value_Size,  Prev: Unrestricted_Access,  Up: Implementation Defined Attributes

VADS_Size
=========

The `'VADS_Size' attribute is intended to make it easier to port legacy
code which relies on the semantics of `'Size' as implemented by the
VADS Ada 83 compiler.  GNAT makes a best effort at duplicating the same
semantic interpretation.  In particular, `'VADS_Size' applied to a
predefined or other primitive type with no Size clause yields the
Object_Size (for example, `Natural'Size' is 32 rather than 31 on
typical machines).  In addition `'VADS_Size' applied to an object gives
the result that would be obtained by applying the attribute to the
corresponding type.


File: gnat_rm.info,  Node: Value_Size,  Next: Wchar_T_Size,  Prev: VADS_Size,  Up: Implementation Defined Attributes

Value_Size
==========

`TYPE'Value_Size' is the number of bits required to represent a value
of the given subtype.  It is the same as `TYPE'Size', but, unlike
`Size', may be set for non-first subtypes.


File: gnat_rm.info,  Node: Wchar_T_Size,  Next: Word_Size,  Prev: Value_Size,  Up: Implementation Defined Attributes

Wchar_T_Size
============

`Standard'Wchar_T_Size' (`Standard' is the only permissible prefix)
provides the size in bits of the C `wchar_t' type primarily for
constructing the definition of this type in package `Interfaces.C'.


File: gnat_rm.info,  Node: Word_Size,  Prev: Wchar_T_Size,  Up: Implementation Defined Attributes

Word_Size
=========

`Standard'Word_Size' (`Standard' is the only permissible prefix)
provides the value `System.Word_Size'.


File: gnat_rm.info,  Node: Implementation Advice,  Next: Implementation Defined Characteristics,  Prev: Implementation Defined Attributes,  Up: Top

3 Implementation Advice
***********************

The main text of the Ada 95 Reference Manual describes the required
behavior of all Ada 95 compilers, and the GNAT compiler conforms to
these requirements.

   In addition, there are sections throughout the Ada 95 reference
manual headed by the phrase "implementation advice".  These sections
are not normative, i.e. they do not specify requirements that all
compilers must follow.  Rather they provide advice on generally
desirable behavior.  You may wonder why they are not requirements.  The
most typical answer is that they describe behavior that seems generally
desirable, but cannot be provided on all systems, or which may be
undesirable on some systems.

   As far as practical, GNAT follows the implementation advice sections
in the Ada 95 Reference Manual.  This chapter contains a table giving
the reference manual section number, paragraph number and several
keywords for each advice.  Each entry consists of the text of the
advice followed by the GNAT interpretation of this advice.  Most often,
this simply says "followed", which means that GNAT follows the advice.
However, in a number of cases, GNAT deliberately deviates from this
advice, in which case the text describes what GNAT does and why.

1.1.3(20): Error Detection
==========================


If an implementation detects the use of an unsupported Specialized Needs
Annex feature at run time, it should raise `Program_Error' if feasible.
Not relevant.  All specialized needs annex features are either
supported, or diagnosed at compile time.

1.1.3(31): Child Units
======================


If an implementation wishes to provide implementation-defined
extensions to the functionality of a language-defined library unit, it
should normally do so by adding children to the library unit.
Followed.

1.1.5(12): Bounded Errors
=========================


If an implementation detects a bounded error or erroneous execution, it
should raise `Program_Error'.
Followed in all cases in which the implementation detects a bounded
error or erroneous execution.  Not all such situations are detected at
runtime.

2.8(16): Pragmas
================


Normally, implementation-defined pragmas should have no semantic effect
for error-free programs; that is, if the implementation-defined pragmas
are removed from a working program, the program should still be legal,
and should still have the same semantics.
The following implementation defined pragmas are exceptions to this
rule:

`Abort_Defer'
     Affects semantics

`Ada_83'
     Affects legality

`Assert'
     Affects semantics

`CPP_Class'
     Affects semantics

`CPP_Constructor'
     Affects semantics

`CPP_Virtual'
     Affects semantics

`CPP_Vtable'
     Affects semantics

`Debug'
     Affects semantics

`Interface_Name'
     Affects semantics

`Machine_Attribute'
     Affects semantics

`Unimplemented_Unit'
     Affects legality

`Unchecked_Union'
     Affects semantics

In each of the above cases, it is essential to the purpose of the pragma
that this advice not be followed.  For details see the separate section
on implementation defined pragmas.

2.8(17-19): Pragmas
===================


Normally, an implementation should not define pragmas that can make an
illegal program legal, except as follows:


   A pragma used to complete a declaration, such as a pragma `Import';


   A pragma used to configure the environment by adding, removing, or
replacing `library_items'.
   See response to paragraph 16 of this same section.

3.5.2(5): Alternative Character Sets
====================================


If an implementation supports a mode with alternative interpretations
for `Character' and `Wide_Character', the set of graphic characters of
`Character' should nevertheless remain a proper subset of the set of
graphic characters of `Wide_Character'.  Any character set
"localizations" should be reflected in the results of the subprograms
defined in the language-defined package `Characters.Handling' (see A.3)
available in such a mode.  In a mode with an alternative interpretation
of `Character', the implementation should also support a corresponding
change in what is a legal `identifier_letter'.
Not all wide character modes follow this advice, in particular the JIS
and IEC modes reflect standard usage in Japan, and in these encoding,
the upper half of the Latin-1 set is not part of the wide-character
subset, since the most significant bit is used for wide character
encoding.  However, this only applies to the external forms.  Internally
there is no such restriction.

3.5.4(28): Integer Types
========================


An implementation should support `Long_Integer' in addition to
`Integer' if the target machine supports 32-bit (or longer) arithmetic.
No other named integer subtypes are recommended for package
`Standard'.  Instead, appropriate named integer subtypes should be
provided in the library package `Interfaces' (see B.2).
`Long_Integer' is supported.  Other standard integer types are supported
so this advice is not fully followed.  These types are supported for
convenient interface to C, and so that all hardware types of the
machine are easily available.

3.5.4(29): Integer Types
========================


An implementation for a two's complement machine should support modular
types with a binary modulus up to `System.Max_Int*2+2'.  An
implementation should support a non-binary modules up to `Integer'Last'.
Followed.

3.5.5(8): Enumeration Values
============================


For the evaluation of a call on `S'Pos' for an enumeration subtype, if
the value of the operand does not correspond to the internal code for
any enumeration literal of its type (perhaps due to an un-initialized
variable), then the implementation should raise `Program_Error'.  This
is particularly important for enumeration types with noncontiguous
internal codes specified by an enumeration_representation_clause.
Followed.

3.5.7(17): Float Types
======================


An implementation should support `Long_Float' in addition to `Float' if
the target machine supports 11 or more digits of precision.  No other
named floating point subtypes are recommended for package `Standard'.
Instead, appropriate named floating point subtypes should be provided
in the library package `Interfaces' (see B.2).
`Short_Float' and `Long_Long_Float' are also provided.  The former
provides improved compatibility with other implementations supporting
this type.  The latter corresponds to the highest precision
floating-point type supported by the hardware.  On most machines, this
will be the same as `Long_Float', but on some machines, it will
correspond to the IEEE extended form.  The notable case is all ia32
(x86) implementations, where `Long_Long_Float' corresponds to the
80-bit extended precision format supported in hardware on this
processor.  Note that the 128-bit format on SPARC is not supported,
since this is a software rather than a hardware format.

3.6.2(11): Multidimensional Arrays
==================================


An implementation should normally represent multidimensional arrays in
row-major order, consistent with the notation used for multidimensional
array aggregates (see 4.3.3).  However, if a pragma `Convention'
(`Fortran', ...) applies to a multidimensional array type, then
column-major order should be used instead (see B.5, "Interfacing with
Fortran").
Followed.

9.6(30-31): Duration'Small
==========================


Whenever possible in an implementation, the value of `Duration'Small'
should be no greater than 100 microseconds.
Followed.  (`Duration'Small' = 10**(-9)).


   The time base for `delay_relative_statements' should be monotonic;
it need not be the same time base as used for `Calendar.Clock'.
   Followed.

10.2.1(12): Consistent Representation
=====================================


In an implementation, a type declared in a pre-elaborated package should
have the same representation in every elaboration of a given version of
the package, whether the elaborations occur in distinct executions of
the same program, or in executions of distinct programs or partitions
that include the given version.
Followed, except in the case of tagged types.  Tagged types involve
implicit pointers to a local copy of a dispatch table, and these
pointers have representations which thus depend on a particular
elaboration of the package.  It is not easy to see how it would be
possible to follow this advice without severely impacting efficiency of
execution.

11.4.1(19): Exception Information
=================================


`Exception_Message' by default and `Exception_Information' should
produce information useful for debugging.  `Exception_Message' should
be short, about one line.  `Exception_Information' can be long.
`Exception_Message' should not include the `Exception_Name'.
`Exception_Information' should include both the `Exception_Name' and
the `Exception_Message'.
Followed.  For each exception that doesn't have a specified
`Exception_Message', the compiler generates one containing the location
of the raise statement.  This location has the form "file:line", where
file is the short file name (without path information) and line is the
line number in the file.  Note that in the case of the Zero Cost
Exception mechanism, these messages become redundant with the
Exception_Information that contains a full backtrace of the calling
sequence, so they are disabled.  To disable explicitly the generation
of the source location message, use the Pragma `Discard_Names'.

11.5(28): Suppression of Checks
===============================


The implementation should minimize the code executed for checks that
have been suppressed.
Followed.

13.1 (21-24): Representation Clauses
====================================


The recommended level of support for all representation items is
qualified as follows:


   An implementation need not support representation items containing
non-static expressions, except that an implementation should support a
representation item for a given entity if each non-static expression in
the representation item is a name that statically denotes a constant
declared before the entity.
   Followed.  In fact, GNAT goes beyond the recommended level of support
by allowing nonstatic expressions in some representation clauses even
without the need to declare constants initialized with the values of
such expressions.  For example:

       X : Integer;
       Y : Float;
       for Y'Address use X'Address;>>


   An implementation need not support a specification for the `Size'
for a given composite subtype, nor the size or storage place for an
object (including a component) of a given composite subtype, unless the
constraints on the subtype and its composite subcomponents (if any) are
all static constraints.
   Followed.  Size Clauses are not permitted on non-static components,
as described above.


   An aliased component, or a component whose type is by-reference,
should always be allocated at an addressable location.
   Followed.

13.2(6-8): Packed Types
=======================


If a type is packed, then the implementation should try to minimize
storage allocated to objects of the type, possibly at the expense of
speed of accessing components, subject to reasonable complexity in
addressing calculations.


   The recommended level of support pragma `Pack' is:

   For a packed record type, the components should be packed as tightly
as possible subject to the Sizes of the component subtypes, and subject
to any `record_representation_clause' that applies to the type; the
implementation may, but need not, reorder components or cross aligned
word boundaries to improve the packing.  A component whose `Size' is
greater than the word size may be allocated an integral number of words.
   Followed.  Tight packing of arrays is supported for all component
sizes up to 64-bits. If the array component size is 1 (that is to say,
if the component is a boolean type or an enumeration type with two
values) then values of the type are implicitly initialized to zero. This
happens both for objects of the packed type, and for objects that have a
subcomponent of the packed type.


   An implementation should support Address clauses for imported
subprograms.
   Followed.  

13.3(14-19): Address Clauses
============================


For an array X, `X'Address' should point at the first component of the
array, and not at the array bounds.
Followed.


   The recommended level of support for the `Address' attribute is:

   `X'Address' should produce a useful result if X is an object that is
aliased or of a by-reference type, or is an entity whose `Address' has
been specified.
   Followed.  A valid address will be produced even if none of those
conditions have been met.  If necessary, the object is forced into
memory to ensure the address is valid.


   An implementation should support `Address' clauses for imported
subprograms.
   Followed.


   Objects (including subcomponents) that are aliased or of a
by-reference type should be allocated on storage element boundaries.
   Followed.


   If the `Address' of an object is specified, or it is imported or
exported, then the implementation should not perform optimizations
based on assumptions of no aliases.
   Followed.

13.3(29-35): Alignment Clauses
==============================


The recommended level of support for the `Alignment' attribute for
subtypes is:

   An implementation should support specified Alignments that are
factors and multiples of the number of storage elements per word,
subject to the following:
Followed.


   An implementation need not support specified `Alignment's for
combinations of `Size's and `Alignment's that cannot be easily loaded
and stored by available machine instructions.
   Followed.


   An implementation need not support specified `Alignment's that are
greater than the maximum `Alignment' the implementation ever returns by
default.
   Followed.


   The recommended level of support for the `Alignment' attribute for
objects is:

   Same as above, for subtypes, but in addition:
   Followed.


   For stand-alone library-level objects of statically constrained
subtypes, the implementation should support all `Alignment's supported
by the target linker.  For example, page alignment is likely to be
supported for such objects, but not for subtypes.
   Followed.

13.3(42-43): Size Clauses
=========================


The recommended level of support for the `Size' attribute of objects is:

   A `Size' clause should be supported for an object if the specified
`Size' is at least as large as its subtype's `Size', and corresponds to
a size in storage elements that is a multiple of the object's
`Alignment' (if the `Alignment' is nonzero).
Followed.

13.3(50-56): Size Clauses
=========================


If the `Size' of a subtype is specified, and allows for efficient
independent addressability (see 9.10) on the target architecture, then
the `Size' of the following objects of the subtype should equal the
`Size' of the subtype:

   Aliased objects (including components).
Followed.


   `Size' clause on a composite subtype should not affect the internal
layout of components.
   Followed.


   The recommended level of support for the `Size' attribute of
subtypes is:


   The `Size' (if not specified) of a static discrete or fixed point
subtype should be the number of bits needed to represent each value
belonging to the subtype using an unbiased representation, leaving space
for a sign bit only if the subtype contains negative values.  If such a
subtype is a first subtype, then an implementation should support a
specified `Size' for it that reflects this representation.
   Followed.


   For a subtype implemented with levels of indirection, the `Size'
should include the size of the pointers, but not the size of what they
point at.
   Followed.

13.3(71-73): Component Size Clauses
===================================


The recommended level of support for the `Component_Size' attribute is:


   An implementation need not support specified `Component_Sizes' that
are less than the `Size' of the component subtype.
   Followed.


   An implementation should support specified `Component_Size's that
are factors and multiples of the word size.  For such
`Component_Size's, the array should contain no gaps between components.
For other `Component_Size's (if supported), the array should contain
no gaps between components when packing is also specified; the
implementation should forbid this combination in cases where it cannot
support a no-gaps representation.
   Followed.

13.4(9-10): Enumeration Representation Clauses
==============================================


The recommended level of support for enumeration representation clauses
is:

   An implementation need not support enumeration representation clauses
for boolean types, but should at minimum support the internal codes in
the range `System.Min_Int.System.Max_Int'.
Followed.

13.5.1(17-22): Record Representation Clauses
============================================


The recommended level of support for
`record_representation_clauses' is:

   An implementation should support storage places that can be extracted
with a load, mask, shift sequence of machine code, and set with a load,
shift, mask, store sequence, given the available machine instructions
and run-time model.
Followed.


   A storage place should be supported if its size is equal to the
`Size' of the component subtype, and it starts and ends on a boundary
that obeys the `Alignment' of the component subtype.
   Followed.


   If the default bit ordering applies to the declaration of a given
type, then for a component whose subtype's `Size' is less than the word
size, any storage place that does not cross an aligned word boundary
should be supported.
   Followed.


   An implementation may reserve a storage place for the tag field of a
tagged type, and disallow other components from overlapping that place.
   Followed.  The storage place for the tag field is the beginning of
the tagged record, and its size is Address'Size.  GNAT will reject an
explicit component clause for the tag field.


   An implementation need not support a `component_clause' for a
component of an extension part if the storage place is not after the
storage places of all components of the parent type, whether or not
those storage places had been specified.
   Followed.  The above advice on record representation clauses is
followed, and all mentioned features are implemented.

13.5.2(5): Storage Place Attributes
===================================


If a component is represented using some form of pointer (such as an
offset) to the actual data of the component, and this data is contiguous
with the rest of the object, then the storage place attributes should
reflect the place of the actual data, not the pointer.  If a component
is allocated discontinuously from the rest of the object, then a warning
should be generated upon reference to one of its storage place
attributes.
Followed.  There are no such components in GNAT.

13.5.3(7-8): Bit Ordering
=========================


The recommended level of support for the non-default bit ordering is:


   If `Word_Size' = `Storage_Unit', then the implementation should
support the non-default bit ordering in addition to the default bit
ordering.
   Followed.  Word size does not equal storage size in this
implementation.  Thus non-default bit ordering is not supported.

13.7(37): Address as Private
============================


`Address' should be of a private type.
Followed.

13.7.1(16): Address Operations
==============================


Operations in `System' and its children should reflect the target
environment semantics as closely as is reasonable.  For example, on most
machines, it makes sense for address arithmetic to "wrap around".
Operations that do not make sense should raise `Program_Error'.
Followed.  Address arithmetic is modular arithmetic that wraps around.
No operation raises `Program_Error', since all operations make sense.

13.9(14-17): Unchecked Conversion
=================================


The `Size' of an array object should not include its bounds; hence, the
bounds should not be part of the converted data.
Followed.


   The implementation should not generate unnecessary run-time checks to
ensure that the representation of S is a representation of the target
type.  It should take advantage of the permission to return by
reference when possible.  Restrictions on unchecked conversions should
be avoided unless required by the target environment.
   Followed.  There are no restrictions on unchecked conversion.  A
warning is generated if the source and target types do not have the
same size since the semantics in this case may be target dependent.


   The recommended level of support for unchecked conversions is:


   Unchecked conversions should be supported and should be reversible in
the cases where this clause defines the result.  To enable meaningful
use of unchecked conversion, a contiguous representation should be used
for elementary subtypes, for statically constrained array subtypes whose
component subtype is one of the subtypes described in this paragraph,
and for record subtypes without discriminants whose component subtypes
are described in this paragraph.
   Followed.

13.11(23-25): Implicit Heap Usage
=================================


An implementation should document any cases in which it dynamically
allocates heap storage for a purpose other than the evaluation of an
allocator.
Followed, the only other points at which heap storage is dynamically
allocated are as follows:

   * At initial elaboration time, to allocate dynamically sized global
     objects.

   * To allocate space for a task when a task is created.

   * To extend the secondary stack dynamically when needed.  The
     secondary stack is used for returning variable length results.


   A default (implementation-provided) storage pool for an
access-to-constant type should not have overhead to support
deallocation of individual objects.
   Followed.


   A storage pool for an anonymous access type should be created at the
point of an allocator for the type, and be reclaimed when the designated
object becomes inaccessible.
   Followed.

13.11.2(17): Unchecked De-allocation
====================================


For a standard storage pool, `Free' should actually reclaim the storage.
Followed.

13.13.2(17): Stream Oriented Attributes
=======================================


If a stream element is the same size as a storage element, then the
normal in-memory representation should be used by `Read' and `Write'
for scalar objects.  Otherwise, `Read' and `Write' should use the
smallest number of stream elements needed to represent all values in
the base range of the scalar type.

   Followed.  By default, GNAT uses the interpretation suggested by
AI-195, which specifies using the size of the first subtype.  However,
such an implementation is based on direct binary representations and is
therefore target- and endianness-dependent.  To address this issue,
GNAT also supplies an alternate implementation of the stream attributes
`Read' and `Write', which uses the target-independent XDR standard
representation for scalar types.  The XDR implementation is provided as
an alternative body of the `System.Stream_Attributes' package, in the
file `s-strxdr.adb' in the GNAT library.  There is no `s-strxdr.ads'
file.  In order to install the XDR implementation, do the following:
  1. Replace the default implementation of the
     `System.Stream_Attributes' package with the XDR implementation.
     For example on a Unix platform issue the commands:
          $ mv s-stratt.adb s-strold.adb
          $ mv s-strxdr.adb s-stratt.adb

  2. Rebuild the GNAT run-time library as documented in the `GNAT
     User's Guide'

A.1(52): Names of Predefined Numeric Types
==========================================


If an implementation provides additional named predefined integer types,
then the names should end with `Integer' as in `Long_Integer'.  If an
implementation provides additional named predefined floating point
types, then the names should end with `Float' as in `Long_Float'.
Followed.

A.3.2(49): `Ada.Characters.Handling'
====================================


If an implementation provides a localized definition of `Character' or
`Wide_Character', then the effects of the subprograms in
`Characters.Handling' should reflect the localizations.  See also 3.5.2.
Followed.  GNAT provides no such localized definitions.

A.4.4(106): Bounded-Length String Handling
==========================================


Bounded string objects should not be implemented by implicit pointers
and dynamic allocation.
Followed.  No implicit pointers or dynamic allocation are used.

A.5.2(46-47): Random Number Generation
======================================


Any storage associated with an object of type `Generator' should be
reclaimed on exit from the scope of the object.
Followed.


   If the generator period is sufficiently long in relation to the
number of distinct initiator values, then each possible value of
`Initiator' passed to `Reset' should initiate a sequence of random
numbers that does not, in a practical sense, overlap the sequence
initiated by any other value.  If this is not possible, then the mapping
between initiator values and generator states should be a rapidly
varying function of the initiator value.
   Followed.  The generator period is sufficiently long for the first
condition here to hold true.

A.10.7(23): `Get_Immediate'
===========================


The `Get_Immediate' procedures should be implemented with unbuffered
input.  For a device such as a keyboard, input should be "available" if
a key has already been typed, whereas for a disk file, input should
always be available except at end of file.  For a file associated with
a keyboard-like device, any line-editing features of the underlying
operating system should be disabled during the execution of
`Get_Immediate'.
Followed on all targets except VxWorks. For VxWorks, there is no way to
provide this functionality that does not result in the input buffer
being flushed before the `Get_Immediate' call. A special unit
`Interfaces.Vxworks.IO' is provided that contains routines to enable
this functionality.

B.1(39-41): Pragma `Export'
===========================


If an implementation supports pragma `Export' to a given language, then
it should also allow the main subprogram to be written in that
language.  It should support some mechanism for invoking the elaboration
of the Ada library units included in the system, and for invoking the
finalization of the environment task.  On typical systems, the
recommended mechanism is to provide two subprograms whose link names are
`adainit' and `adafinal'.  `adainit' should contain the elaboration
code for library units.  `adafinal' should contain the finalization
code.  These subprograms should have no effect the second and
subsequent time they are called.
Followed.


   Automatic elaboration of pre-elaborated packages should be provided
when pragma `Export' is supported.
   Followed when the main program is in Ada.  If the main program is in
a foreign language, then `adainit' must be called to elaborate
pre-elaborated packages.


   For each supported convention L other than `Intrinsic', an
implementation should support `Import' and `Export' pragmas for objects
of L-compatible types and for subprograms, and pragma `Convention' for
L-eligible types and for subprograms, presuming the other language has
corresponding features.  Pragma `Convention' need not be supported for
scalar types.
   Followed.

B.2(12-13): Package `Interfaces'
================================


For each implementation-defined convention identifier, there should be a
child package of package Interfaces with the corresponding name.  This
package should contain any declarations that would be useful for
interfacing to the language (implementation) represented by the
convention.  Any declarations useful for interfacing to any language on
the given hardware architecture should be provided directly in
`Interfaces'.
Followed.  An additional package not defined in the Ada 95 Reference
Manual is `Interfaces.CPP', used for interfacing to C++.


   An implementation supporting an interface to C, COBOL, or Fortran
should provide the corresponding package or packages described in the
following clauses.
   Followed.  GNAT provides all the packages described in this section.

B.3(63-71): Interfacing with C
==============================


An implementation should support the following interface correspondences
between Ada and C.
Followed.


   An Ada procedure corresponds to a void-returning C function.
   Followed.


   An Ada function corresponds to a non-void C function.
   Followed.


   An Ada `in' scalar parameter is passed as a scalar argument to a C
function.
   Followed.


   An Ada `in' parameter of an access-to-object type with designated
type T is passed as a `T*' argument to a C function, where T is the C
type corresponding to the Ada type T.
   Followed.


   An Ada access T parameter, or an Ada `out' or `in out' parameter of
an elementary type T, is passed as a `T*' argument to a C function,
where T is the C type corresponding to the Ada type T.  In the case of
an elementary `out' or `in out' parameter, a pointer to a temporary
copy is used to preserve by-copy semantics.
   Followed.


   An Ada parameter of a record type T, of any mode, is passed as a
`T*' argument to a C function, where T is the C structure corresponding
to the Ada type T.
   Followed.  This convention may be overridden by the use of the
C_Pass_By_Copy pragma, or Convention, or by explicitly specifying the
mechanism for a given call using an extended import or export pragma.


   An Ada parameter of an array type with component type T, of any
mode, is passed as a `T*' argument to a C function, where T is the C
type corresponding to the Ada type T.
   Followed.


   An Ada parameter of an access-to-subprogram type is passed as a
pointer to a C function whose prototype corresponds to the designated
subprogram's specification.
   Followed.

B.4(95-98): Interfacing with COBOL
==================================


An Ada implementation should support the following interface
correspondences between Ada and COBOL.
Followed.


   An Ada access T parameter is passed as a `BY REFERENCE' data item of
the COBOL type corresponding to T.
   Followed.


   An Ada in scalar parameter is passed as a `BY CONTENT' data item of
the corresponding COBOL type.
   Followed.


   Any other Ada parameter is passed as a `BY REFERENCE' data item of
the COBOL type corresponding to the Ada parameter type; for scalars, a
local copy is used if necessary to ensure by-copy semantics.
   Followed.

B.5(22-26): Interfacing with Fortran
====================================


An Ada implementation should support the following interface
correspondences between Ada and Fortran:
Followed.


   An Ada procedure corresponds to a Fortran subroutine.
   Followed.


   An Ada function corresponds to a Fortran function.
   Followed.


   An Ada parameter of an elementary, array, or record type T is passed
as a T argument to a Fortran procedure, where T is the Fortran type
corresponding to the Ada type T, and where the INTENT attribute of the
corresponding dummy argument matches the Ada formal parameter mode; the
Fortran implementation's parameter passing conventions are used.  For
elementary types, a local copy is used if necessary to ensure by-copy
semantics.
   Followed.


   An Ada parameter of an access-to-subprogram type is passed as a
reference to a Fortran procedure whose interface corresponds to the
designated subprogram's specification.
   Followed.

C.1(3-5): Access to Machine Operations
======================================


The machine code or intrinsic support should allow access to all
operations normally available to assembly language programmers for the
target environment, including privileged instructions, if any.
Followed.


   The interfacing pragmas (see Annex B) should support interface to
assembler; the default assembler should be associated with the
convention identifier `Assembler'.
   Followed.


   If an entity is exported to assembly language, then the
implementation should allocate it at an addressable location, and
should ensure that it is retained by the linking process, even if not
otherwise referenced from the Ada code.  The implementation should
assume that any call to a machine code or assembler subprogram is
allowed to read or update every object that is specified as exported.
   Followed.

C.1(10-16): Access to Machine Operations
========================================


The implementation should ensure that little or no overhead is
associated with calling intrinsic and machine-code subprograms.
Followed for both intrinsics and machine-code subprograms.


   It is recommended that intrinsic subprograms be provided for
convenient access to any machine operations that provide special
capabilities or efficiency and that are not otherwise available through
the language constructs.
   Followed.  A full set of machine operation intrinsic subprograms is
provided.


   Atomic read-modify-write operations--e.g., test and set, compare and
swap, decrement and test, enqueue/dequeue.
   Followed on any target supporting such operations.


   Standard numeric functions--e.g., sin, log.
   Followed on any target supporting such operations.


   String manipulation operations--e.g., translate and test.
   Followed on any target supporting such operations.


   Vector operations--e.g., compare vector against thresholds.
   Followed on any target supporting such operations.


   Direct operations on I/O ports.
   Followed on any target supporting such operations.

C.3(28): Interrupt Support
==========================


If the `Ceiling_Locking' policy is not in effect, the implementation
should provide means for the application to specify which interrupts
are to be blocked during protected actions, if the underlying system
allows for a finer-grain control of interrupt blocking.
Followed.  The underlying system does not allow for finer-grain control
of interrupt blocking.

C.3.1(20-21): Protected Procedure Handlers
==========================================


Whenever possible, the implementation should allow interrupt handlers to
be called directly by the hardware.
Followed on any target where the underlying operating system permits
such direct calls.


   Whenever practical, violations of any implementation-defined
restrictions should be detected before run time.
   Followed.  Compile time warnings are given when possible.

C.3.2(25): Package `Interrupts'
===============================


If implementation-defined forms of interrupt handler procedures are
supported, such as protected procedures with parameters, then for each
such form of a handler, a type analogous to `Parameterless_Handler'
should be specified in a child package of `Interrupts', with the same
operations as in the predefined package Interrupts.
Followed.

C.4(14): Pre-elaboration Requirements
=====================================


It is recommended that pre-elaborated packages be implemented in such a
way that there should be little or no code executed at run time for the
elaboration of entities not already covered by the Implementation
Requirements.
Followed.  Executable code is generated in some cases, e.g. loops to
initialize large arrays.

C.5(8): Pragma `Discard_Names'
==============================


If the pragma applies to an entity, then the implementation should
reduce the amount of storage used for storing names associated with that
entity.
Followed.

C.7.2(30): The Package Task_Attributes
======================================


Some implementations are targeted to domains in which memory use at run
time must be completely deterministic.  For such implementations, it is
recommended that the storage for task attributes will be pre-allocated
statically and not from the heap.  This can be accomplished by either
placing restrictions on the number and the size of the task's
attributes, or by using the pre-allocated storage for the first N
attribute objects, and the heap for the others.  In the latter case, N
should be documented.
Not followed.  This implementation is not targeted to such a domain.

D.3(17): Locking Policies
=========================


The implementation should use names that end with `_Locking' for
locking policies defined by the implementation.
Followed.  A single implementation-defined locking policy is defined,
whose name (`Inheritance_Locking') follows this suggestion.

D.4(16): Entry Queuing Policies
===============================


Names that end with `_Queuing' should be used for all
implementation-defined queuing policies.
Followed.  No such implementation-defined queuing policies exist.

D.6(9-10): Preemptive Abort
===========================


Even though the `abort_statement' is included in the list of
potentially blocking operations (see 9.5.1), it is recommended that this
statement be implemented in a way that never requires the task executing
the `abort_statement' to block.
Followed.


   On a multi-processor, the delay associated with aborting a task on
another processor should be bounded; the implementation should use
periodic polling, if necessary, to achieve this.
   Followed.

D.7(21): Tasking Restrictions
=============================


When feasible, the implementation should take advantage of the specified
restrictions to produce a more efficient implementation.
GNAT currently takes advantage of these restrictions by providing an
optimized run time when the Ravenscar profile and the GNAT restricted
run time set of restrictions are specified.  See pragma `Profile
(Ravenscar)' and pragma `Profile (Restricted)' for more details.

D.8(47-49): Monotonic Time
==========================


When appropriate, implementations should provide configuration
mechanisms to change the value of `Tick'.
Such configuration mechanisms are not appropriate to this implementation
and are thus not supported.


   It is recommended that `Calendar.Clock' and `Real_Time.Clock' be
implemented as transformations of the same time base.
   Followed.


   It is recommended that the "best" time base which exists in the
underlying system be available to the application through `Clock'.
"Best" may mean highest accuracy or largest range.
   Followed.

E.5(28-29): Partition Communication Subsystem
=============================================


Whenever possible, the PCS on the called partition should allow for
multiple tasks to call the RPC-receiver with different messages and
should allow them to block until the corresponding subprogram body
returns.
Followed by GLADE, a separately supplied PCS that can be used with GNAT.


   The `Write' operation on a stream of type `Params_Stream_Type'
should raise `Storage_Error' if it runs out of space trying to write
the `Item' into the stream.
   Followed by GLADE, a separately supplied PCS that can be used with
GNAT.

F(7): COBOL Support
===================


If COBOL (respectively, C) is widely supported in the target
environment, implementations supporting the Information Systems Annex
should provide the child package `Interfaces.COBOL' (respectively,
`Interfaces.C') specified in Annex B and should support a
`convention_identifier' of COBOL (respectively, C) in the interfacing
pragmas (see Annex B), thus allowing Ada programs to interface with
programs written in that language.
Followed.

F.1(2): Decimal Radix Support
=============================


Packed decimal should be used as the internal representation for objects
of subtype S when S'Machine_Radix = 10.
Not followed.  GNAT ignores S'Machine_Radix and always uses binary
representations.

G: Numerics
===========



If Fortran (respectively, C) is widely supported in the target
environment, implementations supporting the Numerics Annex should
provide the child package `Interfaces.Fortran' (respectively,
`Interfaces.C') specified in Annex B and should support a
`convention_identifier' of Fortran (respectively, C) in the interfacing
pragmas (see Annex B), thus allowing Ada programs to interface with
programs written in that language.
Followed.

G.1.1(56-58): Complex Types
===========================



Because the usual mathematical meaning of multiplication of a complex
operand and a real operand is that of the scaling of both components of
the former by the latter, an implementation should not perform this
operation by first promoting the real operand to complex type and then
performing a full complex multiplication.  In systems that, in the
future, support an Ada binding to IEC 559:1989, the latter technique
will not generate the required result when one of the components of the
complex operand is infinite.  (Explicit multiplication of the infinite
component by the zero component obtained during promotion yields a NaN
that propagates into the final result.) Analogous advice applies in the
case of multiplication of a complex operand and a pure-imaginary
operand, and in the case of division of a complex operand by a real or
pure-imaginary operand.
Not followed.


   Similarly, because the usual mathematical meaning of addition of a
complex operand and a real operand is that the imaginary operand remains
unchanged, an implementation should not perform this operation by first
promoting the real operand to complex type and then performing a full
complex addition.  In implementations in which the `Signed_Zeros'
attribute of the component type is `True' (and which therefore conform
to IEC 559:1989 in regard to the handling of the sign of zero in
predefined arithmetic operations), the latter technique will not
generate the required result when the imaginary component of the complex
operand is a negatively signed zero.  (Explicit addition of the negative
zero to the zero obtained during promotion yields a positive zero.)
Analogous advice applies in the case of addition of a complex operand
and a pure-imaginary operand, and in the case of subtraction of a
complex operand and a real or pure-imaginary operand.
   Not followed.


   Implementations in which `Real'Signed_Zeros' is `True' should
attempt to provide a rational treatment of the signs of zero results and
result components.  As one example, the result of the `Argument'
function should have the sign of the imaginary component of the
parameter `X' when the point represented by that parameter lies on the
positive real axis; as another, the sign of the imaginary component of
the `Compose_From_Polar' function should be the same as (respectively,
the opposite of) that of the `Argument' parameter when that parameter
has a value of zero and the `Modulus' parameter has a nonnegative
(respectively, negative) value.
   Followed.

G.1.2(49): Complex Elementary Functions
=======================================


Implementations in which `Complex_Types.Real'Signed_Zeros' is `True'
should attempt to provide a rational treatment of the signs of zero
results and result components.  For example, many of the complex
elementary functions have components that are odd functions of one of
the parameter components; in these cases, the result component should
have the sign of the parameter component at the origin.  Other complex
elementary functions have zero components whose sign is opposite that of
a parameter component at the origin, or is always positive or always
negative.
Followed.

G.2.4(19): Accuracy Requirements
================================


The versions of the forward trigonometric functions without a `Cycle'
parameter should not be implemented by calling the corresponding
version with a `Cycle' parameter of `2.0*Numerics.Pi', since this will
not provide the required accuracy in some portions of the domain.  For
the same reason, the version of `Log' without a `Base' parameter should
not be implemented by calling the corresponding version with a `Base'
parameter of `Numerics.e'.
Followed.

G.2.6(15): Complex Arithmetic Accuracy
======================================


The version of the `Compose_From_Polar' function without a `Cycle'
parameter should not be implemented by calling the corresponding
version with a `Cycle' parameter of `2.0*Numerics.Pi', since this will
not provide the required accuracy in some portions of the domain.
Followed.


File: gnat_rm.info,  Node: Implementation Defined Characteristics,  Next: Intrinsic Subprograms,  Prev: Implementation Advice,  Up: Top

4 Implementation Defined Characteristics
****************************************

In addition to the implementation dependent pragmas and attributes, and
the implementation advice, there are a number of other features of Ada
95 that are potentially implementation dependent.  These are mentioned
throughout the Ada 95 Reference Manual, and are summarized in annex M.

   A requirement for conforming Ada compilers is that they provide
documentation describing how the implementation deals with each of these
issues.  In this chapter, you will find each point in annex M listed
followed by a description in italic font of how GNAT handles the
implementation dependence.

   You can use this chapter as a guide to minimizing implementation
dependent features in your programs if portability to other compilers
and other operating systems is an important consideration.  The numbers
in each section below correspond to the paragraph number in the Ada 95
Reference Manual.


*2*.  Whether or not each recommendation given in Implementation Advice
is followed.  See 1.1.2(37).
   *Note Implementation Advice::.


*3*.  Capacity limitations of the implementation.  See 1.1.3(3).
   The complexity of programs that can be processed is limited only by
the total amount of available virtual memory, and disk space for the
generated object files.


*4*.  Variations from the standard that are impractical to avoid given
the implementation's execution environment.  See 1.1.3(6).
   There are no variations from the standard.


*5*.  Which `code_statement's cause external interactions.  See
1.1.3(10).
   Any `code_statement' can potentially cause external interactions.


*6*.  The coded representation for the text of an Ada program.  See
2.1(4).
   See separate section on source representation.


*7*.  The control functions allowed in comments.  See 2.1(14).
   See separate section on source representation.


*8*.  The representation for an end of line.  See 2.2(2).
   See separate section on source representation.


*9*.  Maximum supported line length and lexical element length.  See
2.2(15).
   The maximum line length is 255 characters an the maximum length of a
lexical element is also 255 characters.


*10*.  Implementation defined pragmas.  See 2.8(14).
   *Note Implementation Defined Pragmas::.


*11*.  Effect of pragma `Optimize'.  See 2.8(27).
   Pragma `Optimize', if given with a `Time' or `Space' parameter,
checks that the optimization flag is set, and aborts if it is not.


*12*.  The sequence of characters of the value returned by `S'Image'
when some of the graphic characters of `S'Wide_Image' are not defined
in `Character'.  See 3.5(37).
   The sequence of characters is as defined by the wide character
encoding method used for the source.  See section on source
representation for further details.


*13*.  The predefined integer types declared in `Standard'.  See
3.5.4(25).

`Short_Short_Integer'
     8 bit signed

`Short_Integer'
     (Short) 16 bit signed

`Integer'
     32 bit signed

`Long_Integer'
     64 bit signed (Alpha OpenVMS only) 32 bit signed (all other
     targets)

`Long_Long_Integer'
     64 bit signed


*14*.  Any nonstandard integer types and the operators defined for
them.  See 3.5.4(26).
   There are no nonstandard integer types.


*15*.  Any nonstandard real types and the operators defined for them.
See 3.5.6(8).
   There are no nonstandard real types.


*16*.  What combinations of requested decimal precision and range are
supported for floating point types.  See 3.5.7(7).
   The precision and range is as defined by the IEEE standard.


*17*.  The predefined floating point types declared in `Standard'.  See
3.5.7(16).

`Short_Float'
     32 bit IEEE short

`Float'
     (Short) 32 bit IEEE short

`Long_Float'
     64 bit IEEE long

`Long_Long_Float'
     64 bit IEEE long (80 bit IEEE long on x86 processors)


*18*.  The small of an ordinary fixed point type.  See 3.5.9(8).
   `Fine_Delta' is 2**(-63)


*19*.  What combinations of small, range, and digits are supported for
fixed point types.  See 3.5.9(10).
   Any combinations are permitted that do not result in a small less
than `Fine_Delta' and do not result in a mantissa larger than 63 bits.
If the mantissa is larger than 53 bits on machines where Long_Long_Float
is 64 bits (true of all architectures except ia32), then the output from
Text_IO is accurate to only 53 bits, rather than the full mantissa.
This is because floating-point conversions are used to convert fixed
point.


*20*.  The result of `Tags.Expanded_Name' for types declared within an
unnamed `block_statement'.  See 3.9(10).
   Block numbers of the form `BNNN', where NNN is a decimal integer are
allocated.


*21*.  Implementation-defined attributes.  See 4.1.4(12).
   *Note Implementation Defined Attributes::.


*22*.  Any implementation-defined time types.  See 9.6(6).
   There are no implementation-defined time types.


*23*.  The time base associated with relative delays.
   See 9.6(20).  The time base used is that provided by the C library
function `gettimeofday'.


*24*.  The time base of the type `Calendar.Time'.  See 9.6(23).
   The time base used is that provided by the C library function
`gettimeofday'.


*25*.  The time zone used for package `Calendar' operations.  See
9.6(24).
   The time zone used by package `Calendar' is the current system time
zone setting for local time, as accessed by the C library function
`localtime'.


*26*.  Any limit on `delay_until_statements' of `select_statements'.
See 9.6(29).
   There are no such limits.


*27*.  Whether or not two non overlapping parts of a composite object
are independently addressable, in the case where packing, record
layout, or `Component_Size' is specified for the object.  See 9.10(1).
   Separate components are independently addressable if they do not
share overlapping storage units.


*28*.  The representation for a compilation.  See 10.1(2).
   A compilation is represented by a sequence of files presented to the
compiler in a single invocation of the `gcc' command.


*29*.  Any restrictions on compilations that contain multiple
compilation_units.  See 10.1(4).
   No single file can contain more than one compilation unit, but any
sequence of files can be presented to the compiler as a single
compilation.


*30*.  The mechanisms for creating an environment and for adding and
replacing compilation units.  See 10.1.4(3).
   See separate section on compilation model.


*31*.  The manner of explicitly assigning library units to a partition.
See 10.2(2).
   If a unit contains an Ada main program, then the Ada units for the
partition are determined by recursive application of the rules in the
Ada Reference Manual section 10.2(2-6).  In other words, the Ada units
will be those that are needed by the main program, and then this
definition of need is applied recursively to those units, and the
partition contains the transitive closure determined by this
relationship.  In short, all the necessary units are included, with no
need to explicitly specify the list.  If additional units are required,
e.g. by foreign language units, then all units must be mentioned in the
context clause of one of the needed Ada units.

   If the partition contains no main program, or if the main program is
in a language other than Ada, then GNAT provides the binder options
`-z' and `-n' respectively, and in this case a list of units can be
explicitly supplied to the binder for inclusion in the partition (all
units needed by these units will also be included automatically).  For
full details on the use of these options, refer to the `GNAT User's
Guide' sections on Binding and Linking.


*32*.  The implementation-defined means, if any, of specifying which
compilation units are needed by a given compilation unit.  See 10.2(2).
   The units needed by a given compilation unit are as defined in the
Ada Reference Manual section 10.2(2-6).  There are no
implementation-defined pragmas or other implementation-defined means
for specifying needed units.


*33*.  The manner of designating the main subprogram of a partition.
See 10.2(7).
   The main program is designated by providing the name of the
corresponding `ALI' file as the input parameter to the binder.


*34*.  The order of elaboration of `library_items'.  See 10.2(18).
   The first constraint on ordering is that it meets the requirements of
chapter 10 of the Ada 95 Reference Manual.  This still leaves some
implementation dependent choices, which are resolved by first
elaborating bodies as early as possible (i.e. in preference to specs
where there is a choice), and second by evaluating the immediate with
clauses of a unit to determine the probably best choice, and third by
elaborating in alphabetical order of unit names where a choice still
remains.


*35*.  Parameter passing and function return for the main subprogram.
See 10.2(21).
   The main program has no parameters.  It may be a procedure, or a
function returning an integer type.  In the latter case, the returned
integer value is the return code of the program (overriding any value
that may have been set by a call to `Ada.Command_Line.Set_Exit_Status').


*36*.  The mechanisms for building and running partitions.  See
10.2(24).
   GNAT itself supports programs with only a single partition.  The
GNATDIST tool provided with the GLADE package (which also includes an
implementation of the PCS) provides a completely flexible method for
building and running programs consisting of multiple partitions.  See
the separate GLADE manual for details.


*37*.  The details of program execution, including program termination.
See 10.2(25).
   See separate section on compilation model.


*38*.  The semantics of any non-active partitions supported by the
implementation.  See 10.2(28).
   Passive partitions are supported on targets where shared memory is
provided by the operating system.  See the GLADE reference manual for
further details.


*39*.  The information returned by `Exception_Message'.  See 11.4.1(10).
   Exception message returns the null string unless a specific message
has been passed by the program.


*40*.  The result of `Exceptions.Exception_Name' for types declared
within an unnamed `block_statement'.  See 11.4.1(12).
   Blocks have implementation defined names of the form `BNNN' where
NNN is an integer.


*41*.  The information returned by `Exception_Information'.  See
11.4.1(13).
   `Exception_Information' returns a string in the following format:

     _Exception_Name:_ nnnnn
     _Message:_ mmmmm
     _PID:_ ppp
     _Call stack traceback locations:_
     0xhhhh 0xhhhh 0xhhhh ... 0xhhh

where

   * `nnnn' is the fully qualified name of the exception in all upper
     case letters. This line is always present.

   * `mmmm' is the message (this line present only if message is
     non-null)

   * `ppp' is the Process Id value as a decimal integer (this line is
     present only if the Process Id is non-zero). Currently we are not
     making use of this field.

   * The Call stack traceback locations line and the following values
     are present only if at least one traceback location was recorded.
     The values are given in C style format, with lower case letters
     for a-f, and only as many digits present as are necessary.

The line terminator sequence at the end of each line, including the
last line is a single `LF' character (`16#0A#').


*42*.  Implementation-defined check names.  See 11.5(27).
   No implementation-defined check names are supported.


*43*.  The interpretation of each aspect of representation.  See
13.1(20).
   See separate section on data representations.


*44*.  Any restrictions placed upon representation items.  See 13.1(20).
   See separate section on data representations.


*45*.  The meaning of `Size' for indefinite subtypes.  See 13.3(48).
   Size for an indefinite subtype is the maximum possible size, except
that for the case of a subprogram parameter, the size of the parameter
object is the actual size.


*46*.  The default external representation for a type tag.  See
13.3(75).
   The default external representation for a type tag is the fully
expanded name of the type in upper case letters.


*47*.  What determines whether a compilation unit is the same in two
different partitions.  See 13.3(76).
   A compilation unit is the same in two different partitions if and
only if it derives from the same source file.


*48*.  Implementation-defined components.  See 13.5.1(15).
   The only implementation defined component is the tag for a tagged
type, which contains a pointer to the dispatching table.


*49*.  If `Word_Size' = `Storage_Unit', the default bit ordering.  See
13.5.3(5).
   `Word_Size' (32) is not the same as `Storage_Unit' (8) for this
implementation, so no non-default bit ordering is supported.  The
default bit ordering corresponds to the natural endianness of the
target architecture.


*50*.  The contents of the visible part of package `System' and its
language-defined children.  See 13.7(2).
   See the definition of these packages in files `system.ads' and
`s-stoele.ads'.


*51*.  The contents of the visible part of package
`System.Machine_Code', and the meaning of `code_statements'.  See
13.8(7).
   See the definition and documentation in file `s-maccod.ads'.


*52*.  The effect of unchecked conversion.  See 13.9(11).
   Unchecked conversion between types of the same size and results in
an uninterpreted transmission of the bits from one type to the other.
If the types are of unequal sizes, then in the case of discrete types,
a shorter source is first zero or sign extended as necessary, and a
shorter target is simply truncated on the left.  For all non-discrete
types, the source is first copied if necessary to ensure that the
alignment requirements of the target are met, then a pointer is
constructed to the source value, and the result is obtained by
dereferencing this pointer after converting it to be a pointer to the
target type.


*53*.  The manner of choosing a storage pool for an access type when
`Storage_Pool' is not specified for the type.  See 13.11(17).
   There are 3 different standard pools used by the compiler when
`Storage_Pool' is not specified depending whether the type is local to
a subprogram or defined at the library level and whether
`Storage_Size'is specified or not.  See documentation in the runtime
library units `System.Pool_Global', `System.Pool_Size' and
`System.Pool_Local' in files `s-poosiz.ads', `s-pooglo.ads' and
`s-pooloc.ads' for full details on the default pools used.


*54*.  Whether or not the implementation provides user-accessible names
for the standard pool type(s).  See 13.11(17).
   See documentation in the sources of the run time mentioned in
paragraph *53* .  All these pools are accessible by means of `with''ing
these units.


*55*.  The meaning of `Storage_Size'.  See 13.11(18).
   `Storage_Size' is measured in storage units, and refers to the total
space available for an access type collection, or to the primary stack
space for a task.


*56*.  Implementation-defined aspects of storage pools.  See 13.11(22).
   See documentation in the sources of the run time mentioned in
paragraph *53* for details on GNAT-defined aspects of storage pools.


*57*.  The set of restrictions allowed in a pragma `Restrictions'.  See
13.12(7).
   All RM defined Restriction identifiers are implemented.  The
following additional restriction identifiers are provided.  There are
two separate lists of implementation dependent restriction identifiers.
The first set requires consistency throughout a partition (in other
words, if the restriction identifier is used for any compilation unit
in the partition, then all compilation units in the partition must obey
the restriction.

`Simple_Barriers'
     This restriction ensures at compile time that barriers in entry
     declarations for protected types are restricted to either static
     boolean expressions or references to simple boolean variables
     defined in the private part of the protected type.  No other form
     of entry barriers is permitted.  This is one of the restrictions
     of the Ravenscar profile for limited tasking (see also pragma
     `Profile (Ravenscar)').

`Max_Entry_Queue_Length => Expr'
     This restriction is a declaration that any protected entry
     compiled in the scope of the restriction has at most the specified
     number of tasks waiting on the entry at any one time, and so no
     queue is required.  This restriction is not checked at compile
     time.  A program execution is erroneous if an attempt is made to
     queue more than the specified number of tasks on such an entry.

`No_Calendar'
     This restriction ensures at compile time that there is no implicit
     or explicit dependence on the package `Ada.Calendar'.

`No_Direct_Boolean_Operators'
     This restriction ensures that no logical (and/or/xor) or comparison
     operators are used on operands of type Boolean (or any type derived
     from Boolean). This is intended for use in safety critical programs
     where the certification protocol requires the use of short-circuit
     (and then, or else) forms for all composite boolean operations.

`No_Dynamic_Attachment'
     This restriction ensures that there is no call to any of the
     operations defined in package Ada.Interrupts.

`No_Enumeration_Maps'
     This restriction ensures at compile time that no operations
     requiring enumeration maps are used (that is Image and Value
     attributes applied to enumeration types).

`No_Entry_Calls_In_Elaboration_Code'
     This restriction ensures at compile time that no task or protected
     entry calls are made during elaboration code.  As a result of the
     use of this restriction, the compiler can assume that no code past
     an accept statement in a task can be executed at elaboration time.

`No_Exception_Handlers'
     This restriction ensures at compile time that there are no explicit
     exception handlers. It also indicates that no exception
     propagation will be provided. In this mode, exceptions may be
     raised but will result in an immediate call to the last chance
     handler, a routine that the user must define with the following
     profile:

     procedure Last_Chance_Handler      (Source_Location :
     System.Address; Line : Integer);    pragma Export (C,
     Last_Chance_Handler,
     "__gnat_last_chance_handler");

     The parameter is a C null-terminated string representing a message
     to be    associated with the exception (typically the source
     location of the raise    statement generated by the compiler). The
     Line parameter when non-zero    represents the line number in the
     source program where the raise occurs.

`No_Exception_Streams'
     This restriction ensures at compile time that no stream operations
     for types Exception_Id or Exception_Occurrence are used. This also
     makes it impossible to pass exceptions to or from a partition with
     this restriction in a distributed environment. If this exception
     is active, then the generated code is simplified by omitting the
     otherwise-required global registration of exceptions when they are
     declared.

`No_Implicit_Conditionals'
     This restriction ensures that the generated code does not contain
     any implicit conditionals, either by modifying the generated code
     where possible, or by rejecting any construct that would otherwise
     generate an implicit conditional. Note that this check does not
     include run time constraint checks, which on some targets may
     generate implicit conditionals as well. To control the latter,
     constraint checks can be suppressed in the normal manner.

`No_Implicit_Dynamic_Code'
     This restriction prevents the compiler from building "trampolines".
     This is a structure that is built on the stack and contains dynamic
     code to be executed at run time. A trampoline is needed to
     indirectly address a nested subprogram (that is a subprogram that
     is not at the library level). The restriction prevents the use of
     any of the attributes `Address', `Access' or `Unrestricted_Access'
     being applied to a subprogram that is not at the library level.

`No_Implicit_Loops'
     This restriction ensures that the generated code does not contain
     any implicit `for' loops, either by modifying the generated code
     where possible, or by rejecting any construct that would otherwise
     generate an implicit `for' loop.

`No_Initialize_Scalars'
     This restriction ensures that no unit in the partition is compiled
     with pragma Initialize_Scalars. This allows the generation of more
     efficient code, and in particular eliminates dummy null
     initialization routines that are otherwise generated for some
     record and array types.

`No_Local_Protected_Objects'
     This restriction ensures at compile time that protected objects are
     only declared at the library level.

`No_Protected_Type_Allocators'
     This restriction ensures at compile time that there are no
     allocator expressions that attempt to allocate protected objects.

`No_Secondary_Stack'
     This restriction ensures at compile time that the generated code
     does not contain any reference to the secondary stack.  The
     secondary stack is used to implement functions returning
     unconstrained objects (arrays or records) on some targets.

`No_Select_Statements'
     This restriction ensures at compile time no select statements of
     any kind are permitted, that is the keyword `select' may not
     appear.  This is one of the restrictions of the Ravenscar profile
     for limited tasking (see also pragma `Profile (Ravenscar)').

`No_Standard_Storage_Pools'
     This restriction ensures at compile time that no access types use
     the standard default storage pool.  Any access type declared must
     have an explicit Storage_Pool attribute defined specifying a
     user-defined storage pool.

`No_Streams'
     This restriction ensures at compile/bind time that there are no
     stream objects created (and therefore no actual stream operations).
     This restriction does not forbid dependences on the package
     `Ada.Streams'. So it is permissible to with `Ada.Streams' (or
     another package that does so itself) as long as no actual stream
     objects are created.

`No_Task_Attributes_Package'
     This restriction ensures at compile time that there are no
     implicit or explicit dependencies on the package
     `Ada.Task_Attributes'.

`No_Task_Termination'
     This restriction ensures at compile time that no terminate
     alternatives appear in any task body.

`No_Tasking'
     This restriction prevents the declaration of tasks or task types
     throughout the partition.  It is similar in effect to the use of
     `Max_Tasks => 0' except that violations are caught at compile time
     and cause an error message to be output either by the compiler or
     binder.

`No_Wide_Characters'
     This restriction ensures at compile time that no uses of the types
     `Wide_Character' or `Wide_String' or corresponding wide wide types
     appear, and that no wide or wide wide string or character literals
     appear in the program (that is literals representing characters
     not in type `Character'.

`Static_Priorities'
     This restriction ensures at compile time that all priority
     expressions are static, and that there are no dependencies on the
     package `Ada.Dynamic_Priorities'.

`Static_Storage_Size'
     This restriction ensures at compile time that any expression
     appearing in a Storage_Size pragma or attribute definition clause
     is static.


The second set of implementation dependent restriction identifiers does
not require partition-wide consistency.  The restriction may be
enforced for a single compilation unit without any effect on any of the
other compilation units in the partition.

`No_Elaboration_Code'
     This restriction ensures at compile time that no elaboration code
     is generated.  Note that this is not the same condition as is
     enforced by pragma `Preelaborate'.  There are cases in which pragma
     `Preelaborate' still permits code to be generated (e.g. code to
     initialize a large array to all zeroes), and there are cases of
     units which do not meet the requirements for pragma `Preelaborate',
     but for which no elaboration code is generated.  Generally, it is
     the case that preelaborable units will meet the restrictions, with
     the exception of large aggregates initialized with an
     others_clause, and exception declarations (which generate calls to
     a run-time registry procedure).  This restriction is enforced on a
     unit by unit basis, it need not be obeyed consistently throughout
     a partition.

     It is not possible to precisely document the constructs which are
     compatible with this restriction, since, unlike most other
     restrictions, this is not a restriction on the source code, but a
     restriction on the generated object code. For example, if the
     source contains a declaration:

             Val : constant Integer := X;

     where X is not a static constant, it may be possible, depending on
     complex optimization circuitry, for the compiler to figure out the
     value of X at compile time, in which case this initialization can
     be done by the loader, and requires no initialization code. It is
     not possible to document the precise conditions under which the
     optimizer can figure this out.

`No_Entry_Queue'
     This restriction is a declaration that any protected entry
     compiled in the scope of the restriction has at most one task
     waiting on the entry at any one time, and so no queue is required.
     This restriction is not checked at compile time.  A program
     execution is erroneous if an attempt is made to queue a second
     task on such an entry.

`No_Implementation_Attributes'
     This restriction checks at compile time that no GNAT-defined
     attributes are present.  With this restriction, the only
     attributes that can be used are those defined in the Ada 95
     Reference Manual.

`No_Implementation_Pragmas'
     This restriction checks at compile time that no GNAT-defined
     pragmas are present.  With this restriction, the only pragmas that
     can be used are those defined in the Ada 95 Reference Manual.

`No_Implementation_Restrictions'
     This restriction checks at compile time that no GNAT-defined
     restriction identifiers (other than
     `No_Implementation_Restrictions' itself) are present.  With this
     restriction, the only other restriction identifiers that can be
     used are those defined in the Ada 95 Reference Manual.



*58*.  The consequences of violating limitations on `Restrictions'
pragmas.  See 13.12(9).
   Restrictions that can be checked at compile time result in
illegalities if violated.  Currently there are no other consequences of
violating restrictions.


*59*.  The representation used by the `Read' and `Write' attributes of
elementary types in terms of stream elements.  See 13.13.2(9).
   The representation is the in-memory representation of the base type
of the type, using the number of bits corresponding to the `TYPE'Size'
value, and the natural ordering of the machine.


*60*.  The names and characteristics of the numeric subtypes declared
in the visible part of package `Standard'.  See A.1(3).
   See items describing the integer and floating-point types supported.


*61*.  The accuracy actually achieved by the elementary functions.  See
A.5.1(1).
   The elementary functions correspond to the functions available in
the C library.  Only fast math mode is implemented.


*62*.  The sign of a zero result from some of the operators or
functions in `Numerics.Generic_Elementary_Functions', when
`Float_Type'Signed_Zeros' is `True'.  See A.5.1(46).
   The sign of zeroes follows the requirements of the IEEE 754 standard
on floating-point.


*63*.  The value of `Numerics.Float_Random.Max_Image_Width'.  See
A.5.2(27).
   Maximum image width is 649, see library file `a-numran.ads'.


*64*.  The value of `Numerics.Discrete_Random.Max_Image_Width'.  See
A.5.2(27).
   Maximum image width is 80, see library file `a-nudira.ads'.


*65*.  The algorithms for random number generation.  See A.5.2(32).
   The algorithm is documented in the source files `a-numran.ads' and
`a-numran.adb'.


*66*.  The string representation of a random number generator's state.
See A.5.2(38).
   See the documentation contained in the file `a-numran.adb'.


*67*.  The minimum time interval between calls to the time-dependent
Reset procedure that are guaranteed to initiate different random number
sequences.  See A.5.2(45).
   The minimum period between reset calls to guarantee distinct series
of random numbers is one microsecond.


*68*.  The values of the `Model_Mantissa', `Model_Emin',
`Model_Epsilon', `Model', `Safe_First', and `Safe_Last' attributes, if
the Numerics Annex is not supported.  See A.5.3(72).
   See the source file `ttypef.ads' for the values of all numeric
attributes.


*69*.  Any implementation-defined characteristics of the input-output
packages.  See A.7(14).
   There are no special implementation defined characteristics for these
packages.


*70*.  The value of `Buffer_Size' in `Storage_IO'.  See A.9(10).
   All type representations are contiguous, and the `Buffer_Size' is
the value of `TYPE'Size' rounded up to the next storage unit boundary.


*71*.  External files for standard input, standard output, and standard
error See A.10(5).
   These files are mapped onto the files provided by the C streams
libraries.  See source file `i-cstrea.ads' for further details.


*72*.  The accuracy of the value produced by `Put'.  See A.10.9(36).
   If more digits are requested in the output than are represented by
the precision of the value, zeroes are output in the corresponding least
significant digit positions.


*73*.  The meaning of `Argument_Count', `Argument', and `Command_Name'.
See A.15(1).
   These are mapped onto the `argv' and `argc' parameters of the main
program in the natural manner.


*74*.  Implementation-defined convention names.  See B.1(11).
   The following convention names are supported

`Ada'
     Ada

`Assembler'
     Assembly language

`Asm'
     Synonym for Assembler

`Assembly'
     Synonym for Assembler

`C'
     C

`C_Pass_By_Copy'
     Allowed only for record types, like C, but also notes that record
     is to be passed by copy rather than reference.

`COBOL'
     COBOL

`CPP'
     C++

`Default'
     Treated the same as C

`External'
     Treated the same as C

`Fortran'
     Fortran

`Intrinsic'
     For support of pragma `Import' with convention Intrinsic, see
     separate section on Intrinsic Subprograms.

`Stdcall'
     Stdcall (used for Windows implementations only).  This convention
     correspond to the WINAPI (previously called Pascal convention)
     C/C++ convention under Windows.  A function with this convention
     cleans the stack before exit.

`DLL'
     Synonym for Stdcall

`Win32'
     Synonym for Stdcall

`Stubbed'
     Stubbed is a special convention used to indicate that the body of
     the subprogram will be entirely ignored.  Any call to the
     subprogram is converted into a raise of the `Program_Error'
     exception.  If a pragma `Import' specifies convention `stubbed'
     then no body need be present at all.  This convention is useful
     during development for the inclusion of subprograms whose body has
     not yet been written.

   In addition, all otherwise unrecognized convention names are also
treated as being synonymous with convention C.  In all implementations
except for VMS, use of such other names results in a warning.  In VMS
implementations, these names are accepted silently.


*75*.  The meaning of link names.  See B.1(36).
   Link names are the actual names used by the linker.


*76*.  The manner of choosing link names when neither the link name nor
the address of an imported or exported entity is specified.  See
B.1(36).
   The default linker name is that which would be assigned by the
relevant external language, interpreting the Ada name as being in all
lower case letters.


*77*.  The effect of pragma `Linker_Options'.  See B.1(37).
   The string passed to `Linker_Options' is presented uninterpreted as
an argument to the link command, unless it contains Ascii.NUL
characters.  NUL characters if they appear act as argument separators,
so for example

     pragma Linker_Options ("-labc" & ASCII.Nul & "-ldef");

causes two separate arguments `-labc' and `-ldef' to be passed to the
linker. The order of linker options is preserved for a given unit. The
final list of options passed to the linker is in reverse order of the
elaboration order. For example, linker options fo a body always appear
before the options from the corresponding package spec.


*78*.  The contents of the visible part of package `Interfaces' and its
language-defined descendants.  See B.2(1).
   See files with prefix `i-' in the distributed library.


*79*.  Implementation-defined children of package `Interfaces'.  The
contents of the visible part of package `Interfaces'.  See B.2(11).
   See files with prefix `i-' in the distributed library.


*80*.  The types `Floating', `Long_Floating', `Binary', `Long_Binary',
`Decimal_ Element', and `COBOL_Character'; and the initialization of
the variables `Ada_To_COBOL' and `COBOL_To_Ada', in `Interfaces.COBOL'.
See B.4(50).

`Floating'
     Float

`Long_Floating'
     (Floating) Long_Float

`Binary'
     Integer

`Long_Binary'
     Long_Long_Integer

`Decimal_Element'
     Character

`COBOL_Character'
     Character

For initialization, see the file `i-cobol.ads' in the distributed
library.


*81*.  Support for access to machine instructions.  See C.1(1).
   See documentation in file `s-maccod.ads' in the distributed library.


*82*.  Implementation-defined aspects of access to machine operations.
See C.1(9).
   See documentation in file `s-maccod.ads' in the distributed library.


*83*.  Implementation-defined aspects of interrupts.  See C.3(2).
   Interrupts are mapped to signals or conditions as appropriate.  See
definition of unit `Ada.Interrupt_Names' in source file `a-intnam.ads'
for details on the interrupts supported on a particular target.


*84*.  Implementation-defined aspects of pre-elaboration.  See C.4(13).
   GNAT does not permit a partition to be restarted without reloading,
except under control of the debugger.


*85*.  The semantics of pragma `Discard_Names'.  See C.5(7).
   Pragma `Discard_Names' causes names of enumeration literals to be
suppressed.  In the presence of this pragma, the Image attribute
provides the image of the Pos of the literal, and Value accepts Pos
values.


*86*.  The result of the `Task_Identification.Image' attribute.  See
C.7.1(7).
   The result of this attribute is an 8-digit hexadecimal string
representing the virtual address of the task control block.


*87*.  The value of `Current_Task' when in a protected entry or
interrupt handler.  See C.7.1(17).
   Protected entries or interrupt handlers can be executed by any
convenient thread, so the value of `Current_Task' is undefined.


*88*.  The effect of calling `Current_Task' from an entry body or
interrupt handler.  See C.7.1(19).
   The effect of calling `Current_Task' from an entry body or interrupt
handler is to return the identification of the task currently executing
the code.


*89*.  Implementation-defined aspects of `Task_Attributes'.  See
C.7.2(19).
   There are no implementation-defined aspects of `Task_Attributes'.


*90*.  Values of all `Metrics'.  See D(2).
   The metrics information for GNAT depends on the performance of the
underlying operating system.  The sources of the run-time for tasking
implementation, together with the output from `-gnatG' can be used to
determine the exact sequence of operating systems calls made to
implement various tasking constructs.  Together with appropriate
information on the performance of the underlying operating system, on
the exact target in use, this information can be used to determine the
required metrics.


*91*.  The declarations of `Any_Priority' and `Priority'.  See D.1(11).
   See declarations in file `system.ads'.


*92*.  Implementation-defined execution resources.  See D.1(15).
   There are no implementation-defined execution resources.


*93*.  Whether, on a multiprocessor, a task that is waiting for access
to a protected object keeps its processor busy.  See D.2.1(3).
   On a multi-processor, a task that is waiting for access to a
protected object does not keep its processor busy.


*94*.  The affect of implementation defined execution resources on task
dispatching.  See D.2.1(9).
   Tasks map to threads in the threads package used by GNAT.  Where
possible and appropriate, these threads correspond to native threads of
the underlying operating system.


*95*.  Implementation-defined `policy_identifiers' allowed in a pragma
`Task_Dispatching_Policy'.  See D.2.2(3).
   There are no implementation-defined policy-identifiers allowed in
this pragma.


*96*.  Implementation-defined aspects of priority inversion.  See
D.2.2(16).
   Execution of a task cannot be preempted by the implementation
processing of delay expirations for lower priority tasks.


*97*.  Implementation defined task dispatching.  See D.2.2(18).
   The policy is the same as that of the underlying threads
implementation.


*98*.  Implementation-defined `policy_identifiers' allowed in a pragma
`Locking_Policy'.  See D.3(4).
   The only implementation defined policy permitted in GNAT is
`Inheritance_Locking'.  On targets that support this policy, locking is
implemented by inheritance, i.e. the task owning the lock operates at a
priority equal to the highest priority of any task currently requesting
the lock.


*99*.  Default ceiling priorities.  See D.3(10).
   The ceiling priority of protected objects of the type
`System.Interrupt_Priority'Last' as described in the Ada 95 Reference
Manual D.3(10),


*100*.  The ceiling of any protected object used internally by the
implementation.  See D.3(16).
   The ceiling priority of internal protected objects is
`System.Priority'Last'.


*101*.  Implementation-defined queuing policies.  See D.4(1).
   There are no implementation-defined queueing policies.


*102*.  On a multiprocessor, any conditions that cause the completion
of an aborted construct to be delayed later than what is specified for
a single processor.  See D.6(3).
   The semantics for abort on a multi-processor is the same as on a
single processor, there are no further delays.


*103*.  Any operations that implicitly require heap storage allocation.
See D.7(8).
   The only operation that implicitly requires heap storage allocation
is task creation.


*104*.  Implementation-defined aspects of pragma `Restrictions'.  See
D.7(20).
   There are no such implementation-defined aspects.


*105*.  Implementation-defined aspects of package `Real_Time'.  See
D.8(17).
   There are no implementation defined aspects of package `Real_Time'.


*106*.  Implementation-defined aspects of `delay_statements'.  See
D.9(8).
   Any difference greater than one microsecond will cause the task to be
delayed (see D.9(7)).


*107*.  The upper bound on the duration of interrupt blocking caused by
the implementation.  See D.12(5).
   The upper bound is determined by the underlying operating system.  In
no cases is it more than 10 milliseconds.


*108*.  The means for creating and executing distributed programs.  See
E(5).
   The GLADE package provides a utility GNATDIST for creating and
executing distributed programs.  See the GLADE reference manual for
further details.


*109*.  Any events that can result in a partition becoming
inaccessible.  See E.1(7).
   See the GLADE reference manual for full details on such events.


*110*.  The scheduling policies, treatment of priorities, and
management of shared resources between partitions in certain cases.  See
E.1(11).
   See the GLADE reference manual for full details on these aspects of
multi-partition execution.


*111*.  Events that cause the version of a compilation unit to change.
See E.3(5).
   Editing the source file of a compilation unit, or the source files of
any units on which it is dependent in a significant way cause the
version to change.  No other actions cause the version number to
change.  All changes are significant except those which affect only
layout, capitalization or comments.


*112*.  Whether the execution of the remote subprogram is immediately
aborted as a result of cancellation.  See E.4(13).
   See the GLADE reference manual for details on the effect of abort in
a distributed application.


*113*.  Implementation-defined aspects of the PCS.  See E.5(25).
   See the GLADE reference manual for a full description of all
implementation defined aspects of the PCS.


*114*.  Implementation-defined interfaces in the PCS.  See E.5(26).
   See the GLADE reference manual for a full description of all
implementation defined interfaces.


*115*.  The values of named numbers in the package `Decimal'.  See
F.2(7).

`Max_Scale'
     +18

`Min_Scale'
     -18

`Min_Delta'
     1.0E-18

`Max_Delta'
     1.0E+18

`Max_Decimal_Digits'
     18


*116*.  The value of `Max_Picture_Length' in the package
`Text_IO.Editing'.  See F.3.3(16).
   64


*117*.  The value of `Max_Picture_Length' in the package
`Wide_Text_IO.Editing'.  See F.3.4(5).
   64


*118*.  The accuracy actually achieved by the complex elementary
functions and by other complex arithmetic operations.  See G.1(1).
   Standard library functions are used for the complex arithmetic
operations.  Only fast math mode is currently supported.


*119*.  The sign of a zero result (or a component thereof) from any
operator or function in `Numerics.Generic_Complex_Types', when
`Real'Signed_Zeros' is True.  See G.1.1(53).
   The signs of zero values are as recommended by the relevant
implementation advice.


*120*.  The sign of a zero result (or a component thereof) from any
operator or function in
`Numerics.Generic_Complex_Elementary_Functions', when
`Real'Signed_Zeros' is `True'.  See G.1.2(45).
   The signs of zero values are as recommended by the relevant
implementation advice.


*121*.  Whether the strict mode or the relaxed mode is the default.
See G.2(2).
   The strict mode is the default.  There is no separate relaxed mode.
GNAT provides a highly efficient implementation of strict mode.


*122*.  The result interval in certain cases of fixed-to-float
conversion.  See G.2.1(10).
   For cases where the result interval is implementation dependent, the
accuracy is that provided by performing all operations in 64-bit IEEE
floating-point format.


*123*.  The result of a floating point arithmetic operation in overflow
situations, when the `Machine_Overflows' attribute of the result type
is `False'.  See G.2.1(13).
   Infinite and NaN values are produced as dictated by the IEEE
floating-point standard.

   Note that on machines that are not fully compliant with the IEEE
floating-point standard, such as Alpha, the `-mieee' compiler flag must
be used for achieving IEEE confirming behavior (although at the cost of
a significant performance penalty), so infinite and NaN values are
properly generated.


*124*.  The result interval for division (or exponentiation by a
negative exponent), when the floating point hardware implements division
as multiplication by a reciprocal.  See G.2.1(16).
   Not relevant, division is IEEE exact.


*125*.  The definition of close result set, which determines the
accuracy of certain fixed point multiplications and divisions.  See
G.2.3(5).
   Operations in the close result set are performed using IEEE long
format floating-point arithmetic.  The input operands are converted to
floating-point, the operation is done in floating-point, and the result
is converted to the target type.


*126*.  Conditions on a `universal_real' operand of a fixed point
multiplication or division for which the result shall be in the perfect
result set.  See G.2.3(22).
   The result is only defined to be in the perfect result set if the
result can be computed by a single scaling operation involving a scale
factor representable in 64-bits.


*127*.  The result of a fixed point arithmetic operation in overflow
situations, when the `Machine_Overflows' attribute of the result type
is `False'.  See G.2.3(27).
   Not relevant, `Machine_Overflows' is `True' for fixed-point types.


*128*.  The result of an elementary function reference in overflow
situations, when the `Machine_Overflows' attribute of the result type
is `False'.  See G.2.4(4).
   IEEE infinite and Nan values are produced as appropriate.


*129*.  The value of the angle threshold, within which certain
elementary functions, complex arithmetic operations, and complex
elementary functions yield results conforming to a maximum relative
error bound.  See G.2.4(10).
   Information on this subject is not yet available.


*130*.  The accuracy of certain elementary functions for parameters
beyond the angle threshold.  See G.2.4(10).
   Information on this subject is not yet available.


*131*.  The result of a complex arithmetic operation or complex
elementary function reference in overflow situations, when the
`Machine_Overflows' attribute of the corresponding real type is
`False'.  See G.2.6(5).
   IEEE infinite and Nan values are produced as appropriate.


*132*.  The accuracy of certain complex arithmetic operations and
certain complex elementary functions for parameters (or components
thereof) beyond the angle threshold.  See G.2.6(8).
   Information on those subjects is not yet available.


*133*.  Information regarding bounded errors and erroneous execution.
See H.2(1).
   Information on this subject is not yet available.


*134*.  Implementation-defined aspects of pragma `Inspection_Point'.
See H.3.2(8).
   Pragma `Inspection_Point' ensures that the variable is live and can
be examined by the debugger at the inspection point.


*135*.  Implementation-defined aspects of pragma `Restrictions'.  See
H.4(25).
   There are no implementation-defined aspects of pragma
`Restrictions'.  The use of pragma `Restrictions [No_Exceptions]' has
no effect on the generated code.  Checks must suppressed by use of
pragma `Suppress'.


*136*.  Any restrictions on pragma `Restrictions'.  See H.4(27).
   There are no restrictions on pragma `Restrictions'.


File: gnat_rm.info,  Node: Intrinsic Subprograms,  Next: Representation Clauses and Pragmas,  Prev: Implementation Defined Characteristics,  Up: Top

5 Intrinsic Subprograms
***********************

* Menu:

* Intrinsic Operators::
* Enclosing_Entity::
* Exception_Information::
* Exception_Message::
* Exception_Name::
* File::
* Line::
* Rotate_Left::
* Rotate_Right::
* Shift_Left::
* Shift_Right::
* Shift_Right_Arithmetic::
* Source_Location::

GNAT allows a user application program to write the declaration:

        pragma Import (Intrinsic, name);

providing that the name corresponds to one of the implemented intrinsic
subprograms in GNAT, and that the parameter profile of the referenced
subprogram meets the requirements.  This chapter describes the set of
implemented intrinsic subprograms, and the requirements on parameter
profiles.  Note that no body is supplied; as with other uses of pragma
Import, the body is supplied elsewhere (in this case by the compiler
itself).  Note that any use of this feature is potentially
non-portable, since the Ada standard does not require Ada compilers to
implement this feature.


File: gnat_rm.info,  Node: Intrinsic Operators,  Next: Enclosing_Entity,  Up: Intrinsic Subprograms

5.1 Intrinsic Operators
=======================

All the predefined numeric operators in package Standard in `pragma
Import (Intrinsic,..)' declarations.  In the binary operator case, the
operands must have the same size.  The operand or operands must also be
appropriate for the operator.  For example, for addition, the operands
must both be floating-point or both be fixed-point, and the right
operand for `"**"' must have a root type of `Standard.Integer'Base'.
You can use an intrinsic operator declaration as in the following
example:

        type Int1 is new Integer;
        type Int2 is new Integer;

        function "+" (X1 : Int1; X2 : Int2) return Int1;
        function "+" (X1 : Int1; X2 : Int2) return Int2;
        pragma Import (Intrinsic, "+");

This declaration would permit "mixed mode" arithmetic on items of the
differing types `Int1' and `Int2'.  It is also possible to specify such
operators for private types, if the full views are appropriate
arithmetic types.


File: gnat_rm.info,  Node: Enclosing_Entity,  Next: Exception_Information,  Prev: Intrinsic Operators,  Up: Intrinsic Subprograms

5.2 Enclosing_Entity
====================

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Source_Info'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Source_Info.Enclosing_Entity' to
obtain the name of the current subprogram, package, task, entry, or
protected subprogram.


File: gnat_rm.info,  Node: Exception_Information,  Next: Exception_Message,  Prev: Enclosing_Entity,  Up: Intrinsic Subprograms

5.3 Exception_Information
=========================

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Current_Exception'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function
`GNAT.Current_Exception.Exception_Information' to obtain the exception
information associated with the current exception.


File: gnat_rm.info,  Node: Exception_Message,  Next: Exception_Name,  Prev: Exception_Information,  Up: Intrinsic Subprograms

5.4 Exception_Message
=====================

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Current_Exception'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function
`GNAT.Current_Exception.Exception_Message' to obtain the message
associated with the current exception.


File: gnat_rm.info,  Node: Exception_Name,  Next: File,  Prev: Exception_Message,  Up: Intrinsic Subprograms

5.5 Exception_Name
==================

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Current_Exception'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Current_Exception.Exception_Name'
to obtain the name of the current exception.


File: gnat_rm.info,  Node: File,  Next: Line,  Prev: Exception_Name,  Up: Intrinsic Subprograms

5.6 File
========

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Source_Info'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Source_Info.File' to obtain the
name of the current file.


File: gnat_rm.info,  Node: Line,  Next: Rotate_Left,  Prev: File,  Up: Intrinsic Subprograms

5.7 Line
========

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Source_Info'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Source_Info.Line' to obtain the
number of the current source line.


File: gnat_rm.info,  Node: Rotate_Left,  Next: Rotate_Right,  Prev: Line,  Up: Intrinsic Subprograms

5.8 Rotate_Left
===============

In standard Ada 95, the `Rotate_Left' function is available only for
the predefined modular types in package `Interfaces'.  However, in GNAT
it is possible to define a Rotate_Left function for a user defined
modular type or any signed integer type as in this example:

        function Shift_Left
          (Value  : My_Modular_Type;
           Amount : Natural)
           return   My_Modular_Type;

The requirements are that the profile be exactly as in the example
above.  The only modifications allowed are in the formal parameter
names, and in the type of `Value' and the return type, which must be
the same, and must be either a signed integer type, or a modular
integer type with a binary modulus, and the size must be 8.  16, 32 or
64 bits.


File: gnat_rm.info,  Node: Rotate_Right,  Next: Shift_Left,  Prev: Rotate_Left,  Up: Intrinsic Subprograms

5.9 Rotate_Right
================

A `Rotate_Right' function can be defined for any user defined binary
modular integer type, or signed integer type, as described above for
`Rotate_Left'.


File: gnat_rm.info,  Node: Shift_Left,  Next: Shift_Right,  Prev: Rotate_Right,  Up: Intrinsic Subprograms

5.10 Shift_Left
===============

A `Shift_Left' function can be defined for any user defined binary
modular integer type, or signed integer type, as described above for
`Rotate_Left'.


File: gnat_rm.info,  Node: Shift_Right,  Next: Shift_Right_Arithmetic,  Prev: Shift_Left,  Up: Intrinsic Subprograms

5.11 Shift_Right
================

A `Shift_Right' function can be defined for any user defined binary
modular integer type, or signed integer type, as described above for
`Rotate_Left'.


File: gnat_rm.info,  Node: Shift_Right_Arithmetic,  Next: Source_Location,  Prev: Shift_Right,  Up: Intrinsic Subprograms

5.12 Shift_Right_Arithmetic
===========================

A `Shift_Right_Arithmetic' function can be defined for any user defined
binary modular integer type, or signed integer type, as described above
for `Rotate_Left'.


File: gnat_rm.info,  Node: Source_Location,  Prev: Shift_Right_Arithmetic,  Up: Intrinsic Subprograms

5.13 Source_Location
====================

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Source_Info'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Source_Info.Source_Location' to
obtain the current source file location.


File: gnat_rm.info,  Node: Representation Clauses and Pragmas,  Next: Standard Library Routines,  Prev: Intrinsic Subprograms,  Up: Top

6 Representation Clauses and Pragmas
************************************

* Menu:

* Alignment Clauses::
* Size Clauses::
* Storage_Size Clauses::
* Size of Variant Record Objects::
* Biased Representation ::
* Value_Size and Object_Size Clauses::
* Component_Size Clauses::
* Bit_Order Clauses::
* Effect of Bit_Order on Byte Ordering::
* Pragma Pack for Arrays::
* Pragma Pack for Records::
* Record Representation Clauses::
* Enumeration Clauses::
* Address Clauses::
* Effect of Convention on Representation::
* Determining the Representations chosen by GNAT::

This section describes the representation clauses accepted by GNAT, and
their effect on the representation of corresponding data objects.

   GNAT fully implements Annex C (Systems Programming).  This means
that all the implementation advice sections in chapter 13 are fully
implemented.  However, these sections only require a minimal level of
support for representation clauses.  GNAT provides much more extensive
capabilities, and this section describes the additional capabilities
provided.


File: gnat_rm.info,  Node: Alignment Clauses,  Next: Size Clauses,  Up: Representation Clauses and Pragmas

6.1 Alignment Clauses
=====================

GNAT requires that all alignment clauses specify a power of 2, and all
default alignments are always a power of 2.  The default alignment
values are as follows:

   * _Primitive Types_.  For primitive types, the alignment is the
     minimum of the actual size of objects of the type divided by
     `Storage_Unit', and the maximum alignment supported by the target.
     (This maximum alignment is given by the GNAT-specific attribute
     `Standard'Maximum_Alignment'; see *Note Maximum_Alignment::.)  For
     example, for type `Long_Float', the object size is 8 bytes, and the
     default alignment will be 8 on any target that supports alignments
     this large, but on some targets, the maximum alignment may be
     smaller than 8, in which case objects of type `Long_Float' will be
     maximally aligned.

   * _Arrays_.  For arrays, the alignment is equal to the alignment of
     the component type for the normal case where no packing or
     component size is given.  If the array is packed, and the packing
     is effective (see separate section on packed arrays), then the
     alignment will be one for long packed arrays, or arrays whose
     length is not known at compile time.  For short packed arrays,
     which are handled internally as modular types, the alignment will
     be as described for primitive types, e.g. a packed array of length
     31 bits will have an object size of four bytes, and an alignment
     of 4.

   * _Records_.  For the normal non-packed case, the alignment of a
     record is equal to the maximum alignment of any of its components.
     For tagged records, this includes the implicit access type used
     for the tag.  If a pragma `Pack' is used and all fields are
     packable (see separate section on pragma `Pack'), then the
     resulting alignment is 1.

     A special case is when:
        * the size of the record is given explicitly, or a full record
          representation clause is given, and

        * the size of the record is 2, 4, or 8 bytes.
     In this case, an alignment is chosen to match the size of the
     record. For example, if we have:

             type Small is record
                A, B : Character;
             end record;
             for Small'Size use 16;

     then the default alignment of the record type `Small' is 2, not 1.
     This leads to more efficient code when the record is treated as a
     unit, and also allows the type to specified as `Atomic' on
     architectures requiring strict alignment.


An alignment clause may always specify a larger alignment than the
default value, up to some maximum value dependent on the target
(obtainable by using the attribute reference
`Standard'Maximum_Alignment').  The only case where it is permissible
to specify a smaller alignment than the default value is for a record
with a record representation clause.  In this case, packable fields for
which a component clause is given still result in a default alignment
corresponding to the original type, but this may be overridden, since
these components in fact only require an alignment of one byte.  For
example, given

       type V is record
          A : Integer;
       end record;

       for V use record
          A at 0  range 0 .. 31;
       end record;

       for V'alignment use 1;

The default alignment for the type `V' is 4, as a result of the Integer
field in the record, but since this field is placed with a component
clause, it is permissible, as shown, to override the default alignment
of the record with a smaller value.


File: gnat_rm.info,  Node: Size Clauses,  Next: Storage_Size Clauses,  Prev: Alignment Clauses,  Up: Representation Clauses and Pragmas

6.2 Size Clauses
================

The default size for a type `T' is obtainable through the
language-defined attribute `T'Size' and also through the equivalent
GNAT-defined attribute `T'Value_Size'.  For objects of type `T', GNAT
will generally increase the type size so that the object size
(obtainable through the GNAT-defined attribute `T'Object_Size') is a
multiple of `T'Alignment * Storage_Unit'.  For example

        type Smallint is range 1 .. 6;

        type Rec is record
           Y1 : integer;
           Y2 : boolean;
        end record;

In this example, `Smallint'Size' = `Smallint'Value_Size' = 3, as
specified by the RM rules, but objects of this type will have a size of
8 (`Smallint'Object_Size' = 8), since objects by default occupy an
integral number of storage units.  On some targets, notably older
versions of the Digital Alpha, the size of stand alone objects of this
type may be 32, reflecting the inability of the hardware to do byte
load/stores.

   Similarly, the size of type `Rec' is 40 bits (`Rec'Size' =
`Rec'Value_Size' = 40), but the alignment is 4, so objects of this type
will have their size increased to 64 bits so that it is a multiple of
the alignment (in bits).  This decision is in accordance with the
specific Implementation Advice in RM 13.3(43):

     A `Size' clause should be supported for an object if the specified
     `Size' is at least as large as its subtype's `Size', and
     corresponds to a size in storage elements that is a multiple of
     the object's `Alignment' (if the `Alignment' is nonzero).

An explicit size clause may be used to override the default size by
increasing it.  For example, if we have:

        type My_Boolean is new Boolean;
        for My_Boolean'Size use 32;

then values of this type will always be 32 bits long.  In the case of
discrete types, the size can be increased up to 64 bits, with the effect
that the entire specified field is used to hold the value, sign- or
zero-extended as appropriate.  If more than 64 bits is specified, then
padding space is allocated after the value, and a warning is issued that
there are unused bits.

   Similarly the size of records and arrays may be increased, and the
effect is to add padding bits after the value.  This also causes a
warning message to be generated.

   The largest Size value permitted in GNAT is 2**31-1.  Since this is a
Size in bits, this corresponds to an object of size 256 megabytes (minus
one).  This limitation is true on all targets.  The reason for this
limitation is that it improves the quality of the code in many cases if
it is known that a Size value can be accommodated in an object of type
Integer.


File: gnat_rm.info,  Node: Storage_Size Clauses,  Next: Size of Variant Record Objects,  Prev: Size Clauses,  Up: Representation Clauses and Pragmas

6.3 Storage_Size Clauses
========================

For tasks, the `Storage_Size' clause specifies the amount of space to
be allocated for the task stack.  This cannot be extended, and if the
stack is exhausted, then `Storage_Error' will be raised (if stack
checking is enabled).  Use a `Storage_Size' attribute definition clause,
or a `Storage_Size' pragma in the task definition to set the
appropriate required size.  A useful technique is to include in every
task definition a pragma of the form:

        pragma Storage_Size (Default_Stack_Size);

Then `Default_Stack_Size' can be defined in a global package, and
modified as required.  Any tasks requiring stack sizes different from
the default can have an appropriate alternative reference in the pragma.

   For access types, the `Storage_Size' clause specifies the maximum
space available for allocation of objects of the type.  If this space is
exceeded then `Storage_Error' will be raised by an allocation attempt.
In the case where the access type is declared local to a subprogram, the
use of a `Storage_Size' clause triggers automatic use of a special
predefined storage pool (`System.Pool_Size') that ensures that all
space for the pool is automatically reclaimed on exit from the scope in
which the type is declared.

   A special case recognized by the compiler is the specification of a
`Storage_Size' of zero for an access type.  This means that no items
can be allocated from the pool, and this is recognized at compile time,
and all the overhead normally associated with maintaining a fixed size
storage pool is eliminated.  Consider the following example:

        procedure p is
           type R is array (Natural) of Character;
           type P is access all R;
           for P'Storage_Size use 0;
           --  Above access type intended only for interfacing purposes

           y : P;

           procedure g (m : P);
           pragma Import (C, g);

           --  ...

        begin
           --  ...
           y := new R;
        end;

As indicated in this example, these dummy storage pools are often
useful in connection with interfacing where no object will ever be
allocated.  If you compile the above example, you get the warning:

        p.adb:16:09: warning: allocation from empty storage pool
        p.adb:16:09: warning: Storage_Error will be raised at run time

Of course in practice, there will not be any explicit allocators in the
case of such an access declaration.


File: gnat_rm.info,  Node: Size of Variant Record Objects,  Next: Biased Representation,  Prev: Storage_Size Clauses,  Up: Representation Clauses and Pragmas

6.4 Size of Variant Record Objects
==================================

In the case of variant record objects, there is a question whether Size
gives information about a particular variant, or the maximum size
required for any variant.  Consider the following program

     with Text_IO; use Text_IO;
     procedure q is
        type R1 (A : Boolean := False) is record
          case A is
            when True  => X : Character;
            when False => null;
          end case;
        end record;

        V1 : R1 (False);
        V2 : R1;

     begin
        Put_Line (Integer'Image (V1'Size));
        Put_Line (Integer'Image (V2'Size));
     end q;

Here we are dealing with a variant record, where the True variant
requires 16 bits, and the False variant requires 8 bits.  In the above
example, both V1 and V2 contain the False variant, which is only 8 bits
long.  However, the result of running the program is:

     8
     16

The reason for the difference here is that the discriminant value of V1
is fixed, and will always be False.  It is not possible to assign a
True variant value to V1, therefore 8 bits is sufficient.  On the other
hand, in the case of V2, the initial discriminant value is False (from
the default), but it is possible to assign a True variant value to V2,
therefore 16 bits must be allocated for V2 in the general case, even
fewer bits may be needed at any particular point during the program
execution.

   As can be seen from the output of this program, the `'Size'
attribute applied to such an object in GNAT gives the actual allocated
size of the variable, which is the largest size of any of the variants.
The Ada Reference Manual is not completely clear on what choice should
be made here, but the GNAT behavior seems most consistent with the
language in the RM.

   In some cases, it may be desirable to obtain the size of the current
variant, rather than the size of the largest variant.  This can be
achieved in GNAT by making use of the fact that in the case of a
subprogram parameter, GNAT does indeed return the size of the current
variant (because a subprogram has no way of knowing how much space is
actually allocated for the actual).

   Consider the following modified version of the above program:

     with Text_IO; use Text_IO;
     procedure q is
        type R1 (A : Boolean := False) is record
          case A is
            when True  => X : Character;
            when False => null;
          end case;
        end record;

        V2 : R1;

        function Size (V : R1) return Integer is
        begin
           return V'Size;
        end Size;

     begin
        Put_Line (Integer'Image (V2'Size));
        Put_Line (Integer'IMage (Size (V2)));
        V2 := (True, 'x');
        Put_Line (Integer'Image (V2'Size));
        Put_Line (Integer'IMage (Size (V2)));
     end q;

The output from this program is

     16
     8
     16
     16

Here we see that while the `'Size' attribute always returns the maximum
size, regardless of the current variant value, the `Size' function does
indeed return the size of the current variant value.


File: gnat_rm.info,  Node: Biased Representation,  Next: Value_Size and Object_Size Clauses,  Prev: Size of Variant Record Objects,  Up: Representation Clauses and Pragmas

6.5 Biased Representation
=========================

In the case of scalars with a range starting at other than zero, it is
possible in some cases to specify a size smaller than the default
minimum value, and in such cases, GNAT uses an unsigned biased
representation, in which zero is used to represent the lower bound, and
successive values represent successive values of the type.

   For example, suppose we have the declaration:

        type Small is range -7 .. -4;
        for Small'Size use 2;

Although the default size of type `Small' is 4, the `Size' clause is
accepted by GNAT and results in the following representation scheme:

       -7 is represented as 2#00#
       -6 is represented as 2#01#
       -5 is represented as 2#10#
       -4 is represented as 2#11#

Biased representation is only used if the specified `Size' clause
cannot be accepted in any other manner.  These reduced sizes that force
biased representation can be used for all discrete types except for
enumeration types for which a representation clause is given.


File: gnat_rm.info,  Node: Value_Size and Object_Size Clauses,  Next: Component_Size Clauses,  Prev: Biased Representation,  Up: Representation Clauses and Pragmas

6.6 Value_Size and Object_Size Clauses
======================================

In Ada 95, `T'Size' for a type `T' is the minimum number of bits
required to hold values of type `T'.  Although this interpretation was
allowed in Ada 83, it was not required, and this requirement in practice
can cause some significant difficulties.  For example, in most Ada 83
compilers, `Natural'Size' was 32.  However, in Ada 95, `Natural'Size' is
typically 31.  This means that code may change in behavior when moving
from Ada 83 to Ada 95.  For example, consider:

        type Rec is record;
           A : Natural;
           B : Natural;
        end record;

        for Rec use record
           at 0  range 0 .. Natural'Size - 1;
           at 0  range Natural'Size .. 2 * Natural'Size - 1;
        end record;

In the above code, since the typical size of `Natural' objects is 32
bits and `Natural'Size' is 31, the above code can cause unexpected
inefficient packing in Ada 95, and in general there are cases where the
fact that the object size can exceed the size of the type causes
surprises.

   To help get around this problem GNAT provides two implementation
defined attributes, `Value_Size' and `Object_Size'.  When applied to a
type, these attributes yield the size of the type (corresponding to the
RM defined size attribute), and the size of objects of the type
respectively.

   The `Object_Size' is used for determining the default size of
objects and components.  This size value can be referred to using the
`Object_Size' attribute.  The phrase "is used" here means that it is
the basis of the determination of the size.  The backend is free to pad
this up if necessary for efficiency, e.g. an 8-bit stand-alone
character might be stored in 32 bits on a machine with no efficient
byte access instructions such as the Alpha.

   The default rules for the value of `Object_Size' for discrete types
are as follows:

   * The `Object_Size' for base subtypes reflect the natural hardware
     size in bits (run the compiler with `-gnatS' to find those values
     for numeric types). Enumeration types and fixed-point base
     subtypes have 8, 16, 32 or 64 bits for this size, depending on the
     range of values to be stored.

   * The `Object_Size' of a subtype is the same as the `Object_Size' of
     the type from which it is obtained.

   * The `Object_Size' of a derived base type is copied from the parent
     base type, and the `Object_Size' of a derived first subtype is
     copied from the parent first subtype.

The `Value_Size' attribute is the (minimum) number of bits required to
store a value of the type.  This value is used to determine how tightly
to pack records or arrays with components of this type, and also affects
the semantics of unchecked conversion (unchecked conversions where the
`Value_Size' values differ generate a warning, and are potentially
target dependent).

   The default rules for the value of `Value_Size' are as follows:

   * The `Value_Size' for a base subtype is the minimum number of bits
     required to store all values of the type (including the sign bit
     only if negative values are possible).

   * If a subtype statically matches the first subtype of a given type,
     then it has by default the same `Value_Size' as the first subtype.
     This is a consequence of RM 13.1(14) ("if two subtypes statically
     match, then their subtype-specific aspects are the same".)

   * All other subtypes have a `Value_Size' corresponding to the minimum
     number of bits required to store all values of the subtype.  For
     dynamic bounds, it is assumed that the value can range down or up
     to the corresponding bound of the ancestor

The RM defined attribute `Size' corresponds to the `Value_Size'
attribute.

   The `Size' attribute may be defined for a first-named subtype.  This
sets the `Value_Size' of the first-named subtype to the given value,
and the `Object_Size' of this first-named subtype to the given value
padded up to an appropriate boundary.  It is a consequence of the
default rules above that this `Object_Size' will apply to all further
subtypes.  On the other hand, `Value_Size' is affected only for the
first subtype, any dynamic subtypes obtained from it directly, and any
statically matching subtypes.  The `Value_Size' of any other static
subtypes is not affected.

   `Value_Size' and `Object_Size' may be explicitly set for any subtype
using an attribute definition clause.  Note that the use of these
attributes can cause the RM 13.1(14) rule to be violated.  If two
access types reference aliased objects whose subtypes have differing
`Object_Size' values as a result of explicit attribute definition
clauses, then it is erroneous to convert from one access subtype to the
other.

   At the implementation level, Esize stores the Object_Size and the
RM_Size field stores the `Value_Size' (and hence the value of the
`Size' attribute, which, as noted above, is equivalent to `Value_Size').

   To get a feel for the difference, consider the following examples
(note that in each case the base is `Short_Short_Integer' with a size
of 8):

                                            Object_Size     Value_Size

     type x1 is range 0 .. 5;                    8               3

     type x2 is range 0 .. 5;
     for x2'size use 12;                        16              12

     subtype x3 is x2 range 0 .. 3;             16               2

     subtype x4 is x2'base range 0 .. 10;        8               4

     subtype x5 is x2 range 0 .. dynamic;       16               3*

     subtype x6 is x2'base range 0 .. dynamic;   8               3*

Note: the entries marked "3*" are not actually specified by the Ada 95
RM, but it seems in the spirit of the RM rules to allocate the minimum
number of bits (here 3, given the range for `x2') known to be large
enough to hold the given range of values.

   So far, so good, but GNAT has to obey the RM rules, so the question
is under what conditions must the RM `Size' be used.  The following is
a list of the occasions on which the RM `Size' must be used:

   * Component size for packed arrays or records

   * Value of the attribute `Size' for a type

   * Warning about sizes not matching for unchecked conversion

For record types, the `Object_Size' is always a multiple of the
alignment of the type (this is true for all types). In some cases the
`Value_Size' can be smaller. Consider:

        type R is record
          X : Integer;
          Y : Character;
        end record;

On a typical 32-bit architecture, the X component will be four bytes,
and require four-byte alignment, and the Y component will be one byte.
In this case `R'Value_Size' will be 40 (bits) since this is the minimum
size required to store a value of this type, and for example, it is
permissible to have a component of type R in an outer record whose
component size is specified to be 48 bits. However, `R'Object_Size'
will be 64 (bits), since it must be rounded up so that this value is a
multiple of the alignment (4 bytes = 32 bits).

For all other types, the `Object_Size' and Value_Size are the same (and
equivalent to the RM attribute `Size').  Only `Size' may be specified
for such types.


File: gnat_rm.info,  Node: Component_Size Clauses,  Next: Bit_Order Clauses,  Prev: Value_Size and Object_Size Clauses,  Up: Representation Clauses and Pragmas

6.7 Component_Size Clauses
==========================

Normally, the value specified in a component size clause must be
consistent with the subtype of the array component with regard to size
and alignment.  In other words, the value specified must be at least
equal to the size of this subtype, and must be a multiple of the
alignment value.

   In addition, component size clauses are allowed which cause the array
to be packed, by specifying a smaller value.  The cases in which this
is allowed are for component size values in the range 1 through 63.
The value specified must not be smaller than the Size of the subtype.
GNAT will accurately honor all packing requests in this range.  For
example, if we have:

     type r is array (1 .. 8) of Natural;
     for r'Component_Size use 31;

then the resulting array has a length of 31 bytes (248 bits = 8 * 31).
Of course access to the components of such an array is considerably
less efficient than if the natural component size of 32 is used.

   Note that there is no point in giving both a component size clause
and a pragma Pack for the same array type. if such duplicate clauses
are given, the pragma Pack will be ignored.


File: gnat_rm.info,  Node: Bit_Order Clauses,  Next: Effect of Bit_Order on Byte Ordering,  Prev: Component_Size Clauses,  Up: Representation Clauses and Pragmas

6.8 Bit_Order Clauses
=====================

For record subtypes, GNAT permits the specification of the `Bit_Order'
attribute.  The specification may either correspond to the default bit
order for the target, in which case the specification has no effect and
places no additional restrictions, or it may be for the non-standard
setting (that is the opposite of the default).

   In the case where the non-standard value is specified, the effect is
to renumber bits within each byte, but the ordering of bytes is not
affected.  There are certain restrictions placed on component clauses
as follows:

   * Components fitting within a single storage unit.  These are
     unrestricted, and the effect is merely to renumber bits.  For
     example if we are on a little-endian machine with `Low_Order_First'
     being the default, then the following two declarations have exactly
     the same effect:

             type R1 is record
                A : Boolean;
                B : Integer range 1 .. 120;
             end record;

             for R1 use record
                A at 0 range 0 .. 0;
                B at 0 range 1 .. 7;
             end record;

             type R2 is record
                A : Boolean;
                B : Integer range 1 .. 120;
             end record;

             for R2'Bit_Order use High_Order_First;

             for R2 use record
                A at 0 range 7 .. 7;
                B at 0 range 0 .. 6;
             end record;

     The useful application here is to write the second declaration
     with the `Bit_Order' attribute definition clause, and know that it
     will be treated the same, regardless of whether the target is
     little-endian or big-endian.

   * Components occupying an integral number of bytes.  These are
     components that exactly fit in two or more bytes.  Such component
     declarations are allowed, but have no effect, since it is
     important to realize that the `Bit_Order' specification does not
     affect the ordering of bytes.  In particular, the following
     attempt at getting an endian-independent integer does not work:

             type R2 is record
                A : Integer;
             end record;

             for R2'Bit_Order use High_Order_First;

             for R2 use record
                A at 0 range 0 .. 31;
             end record;

     This declaration will result in a little-endian integer on a
     little-endian machine, and a big-endian integer on a big-endian
     machine.  If byte flipping is required for interoperability
     between big- and little-endian machines, this must be explicitly
     programmed.  This capability is not provided by `Bit_Order'.

   * Components that are positioned across byte boundaries but do not
     occupy an integral number of bytes.  Given that bytes are not
     reordered, such fields would occupy a non-contiguous sequence of
     bits in memory, requiring non-trivial code to reassemble.  They
     are for this reason not permitted, and any component clause
     specifying such a layout will be flagged as illegal by GNAT.


Since the misconception that Bit_Order automatically deals with all
endian-related incompatibilities is a common one, the specification of
a component field that is an integral number of bytes will always
generate a warning.  This warning may be suppressed using `pragma
Suppress' if desired.  The following section contains additional
details regarding the issue of byte ordering.


File: gnat_rm.info,  Node: Effect of Bit_Order on Byte Ordering,  Next: Pragma Pack for Arrays,  Prev: Bit_Order Clauses,  Up: Representation Clauses and Pragmas

6.9 Effect of Bit_Order on Byte Ordering
========================================

In this section we will review the effect of the `Bit_Order' attribute
definition clause on byte ordering.  Briefly, it has no effect at all,
but a detailed example will be helpful.  Before giving this example,
let us review the precise definition of the effect of defining
`Bit_Order'.  The effect of a non-standard bit order is described in
section 15.5.3 of the Ada Reference Manual:

     2   A bit ordering is a method of interpreting the meaning of the
     storage place attributes.

To understand the precise definition of storage place attributes in
this context, we visit section 13.5.1 of the manual:

     13   A record_representation_clause (without the mod_clause)
     specifies the layout.  The storage place attributes (see 13.5.2)
     are taken from the values of the position, first_bit, and last_bit
     expressions after normalizing those values so that first_bit is
     less than Storage_Unit.

The critical point here is that storage places are taken from the
values after normalization, not before.  So the `Bit_Order'
interpretation applies to normalized values.  The interpretation is
described in the later part of the 15.5.3 paragraph:

     2   A bit ordering is a method of interpreting the meaning of the
     storage place attributes.  High_Order_First (known in the
     vernacular as "big endian") means that the first bit of a storage
     element (bit 0) is the most significant bit (interpreting the
     sequence of bits that represent a component as an unsigned integer
     value).  Low_Order_First (known in the vernacular as "little
     endian") means the opposite: the first bit is the least
     significant.

Note that the numbering is with respect to the bits of a storage unit.
In other words, the specification affects only the numbering of bits
within a single storage unit.

   We can make the effect clearer by giving an example.

   Suppose that we have an external device which presents two bytes,
the first byte presented, which is the first (low addressed byte) of
the two byte record is called Master, and the second byte is called
Slave.

   The left most (most significant bit is called Control for each byte,
and the remaining 7 bits are called V1, V2, ... V7, where V7 is the
rightmost (least significant) bit.

   On a big-endian machine, we can write the following representation
clause

        type Data is record
           Master_Control : Bit;
           Master_V1      : Bit;
           Master_V2      : Bit;
           Master_V3      : Bit;
           Master_V4      : Bit;
           Master_V5      : Bit;
           Master_V6      : Bit;
           Master_V7      : Bit;
           Slave_Control  : Bit;
           Slave_V1       : Bit;
           Slave_V2       : Bit;
           Slave_V3       : Bit;
           Slave_V4       : Bit;
           Slave_V5       : Bit;
           Slave_V6       : Bit;
           Slave_V7       : Bit;
        end record;

        for Data use record
           Master_Control at 0 range 0 .. 0;
           Master_V1      at 0 range 1 .. 1;
           Master_V2      at 0 range 2 .. 2;
           Master_V3      at 0 range 3 .. 3;
           Master_V4      at 0 range 4 .. 4;
           Master_V5      at 0 range 5 .. 5;
           Master_V6      at 0 range 6 .. 6;
           Master_V7      at 0 range 7 .. 7;
           Slave_Control  at 1 range 0 .. 0;
           Slave_V1       at 1 range 1 .. 1;
           Slave_V2       at 1 range 2 .. 2;
           Slave_V3       at 1 range 3 .. 3;
           Slave_V4       at 1 range 4 .. 4;
           Slave_V5       at 1 range 5 .. 5;
           Slave_V6       at 1 range 6 .. 6;
           Slave_V7       at 1 range 7 .. 7;
        end record;

Now if we move this to a little endian machine, then the bit ordering
within the byte is backwards, so we have to rewrite the record rep
clause as:

        for Data use record
           Master_Control at 0 range 7 .. 7;
           Master_V1      at 0 range 6 .. 6;
           Master_V2      at 0 range 5 .. 5;
           Master_V3      at 0 range 4 .. 4;
           Master_V4      at 0 range 3 .. 3;
           Master_V5      at 0 range 2 .. 2;
           Master_V6      at 0 range 1 .. 1;
           Master_V7      at 0 range 0 .. 0;
           Slave_Control  at 1 range 7 .. 7;
           Slave_V1       at 1 range 6 .. 6;
           Slave_V2       at 1 range 5 .. 5;
           Slave_V3       at 1 range 4 .. 4;
           Slave_V4       at 1 range 3 .. 3;
           Slave_V5       at 1 range 2 .. 2;
           Slave_V6       at 1 range 1 .. 1;
           Slave_V7       at 1 range 0 .. 0;
        end record;

It is a nuisance to have to rewrite the clause, especially if the code
has to be maintained on both machines.  However, this is a case that we
can handle with the `Bit_Order' attribute if it is implemented.  Note
that the implementation is not required on byte addressed machines, but
it is indeed implemented in GNAT.  This means that we can simply use the
first record clause, together with the declaration

        for Data'Bit_Order use High_Order_First;

and the effect is what is desired, namely the layout is exactly the
same, independent of whether the code is compiled on a big-endian or
little-endian machine.

   The important point to understand is that byte ordering is not
affected.  A `Bit_Order' attribute definition never affects which byte
a field ends up in, only where it ends up in that byte.  To make this
clear, let us rewrite the record rep clause of the previous example as:

        for Data'Bit_Order use High_Order_First;
        for Data use record
           Master_Control at 0 range  0 .. 0;
           Master_V1      at 0 range  1 .. 1;
           Master_V2      at 0 range  2 .. 2;
           Master_V3      at 0 range  3 .. 3;
           Master_V4      at 0 range  4 .. 4;
           Master_V5      at 0 range  5 .. 5;
           Master_V6      at 0 range  6 .. 6;
           Master_V7      at 0 range  7 .. 7;
           Slave_Control  at 0 range  8 .. 8;
           Slave_V1       at 0 range  9 .. 9;
           Slave_V2       at 0 range 10 .. 10;
           Slave_V3       at 0 range 11 .. 11;
           Slave_V4       at 0 range 12 .. 12;
           Slave_V5       at 0 range 13 .. 13;
           Slave_V6       at 0 range 14 .. 14;
           Slave_V7       at 0 range 15 .. 15;
        end record;

This is exactly equivalent to saying (a repeat of the first example):

        for Data'Bit_Order use High_Order_First;
        for Data use record
           Master_Control at 0 range 0 .. 0;
           Master_V1      at 0 range 1 .. 1;
           Master_V2      at 0 range 2 .. 2;
           Master_V3      at 0 range 3 .. 3;
           Master_V4      at 0 range 4 .. 4;
           Master_V5      at 0 range 5 .. 5;
           Master_V6      at 0 range 6 .. 6;
           Master_V7      at 0 range 7 .. 7;
           Slave_Control  at 1 range 0 .. 0;
           Slave_V1       at 1 range 1 .. 1;
           Slave_V2       at 1 range 2 .. 2;
           Slave_V3       at 1 range 3 .. 3;
           Slave_V4       at 1 range 4 .. 4;
           Slave_V5       at 1 range 5 .. 5;
           Slave_V6       at 1 range 6 .. 6;
           Slave_V7       at 1 range 7 .. 7;
        end record;

Why are they equivalent? Well take a specific field, the `Slave_V2'
field.  The storage place attributes are obtained by normalizing the
values given so that the `First_Bit' value is less than 8.  After
normalizing the values (0,10,10) we get (1,2,2) which is exactly what
we specified in the other case.

   Now one might expect that the `Bit_Order' attribute might affect bit
numbering within the entire record component (two bytes in this case,
thus affecting which byte fields end up in), but that is not the way
this feature is defined, it only affects numbering of bits, not which
byte they end up in.

   Consequently it never makes sense to specify a starting bit number
greater than 7 (for a byte addressable field) if an attribute
definition for `Bit_Order' has been given, and indeed it may be
actively confusing to specify such a value, so the compiler generates a
warning for such usage.

   If you do need to control byte ordering then appropriate conditional
values must be used.  If in our example, the slave byte came first on
some machines we might write:

        Master_Byte_First constant Boolean := ...;

        Master_Byte : constant Natural :=
                        1 - Boolean'Pos (Master_Byte_First);
        Slave_Byte  : constant Natural :=
                        Boolean'Pos (Master_Byte_First);

        for Data'Bit_Order use High_Order_First;
        for Data use record
           Master_Control at Master_Byte range 0 .. 0;
           Master_V1      at Master_Byte range 1 .. 1;
           Master_V2      at Master_Byte range 2 .. 2;
           Master_V3      at Master_Byte range 3 .. 3;
           Master_V4      at Master_Byte range 4 .. 4;
           Master_V5      at Master_Byte range 5 .. 5;
           Master_V6      at Master_Byte range 6 .. 6;
           Master_V7      at Master_Byte range 7 .. 7;
           Slave_Control  at Slave_Byte  range 0 .. 0;
           Slave_V1       at Slave_Byte  range 1 .. 1;
           Slave_V2       at Slave_Byte  range 2 .. 2;
           Slave_V3       at Slave_Byte  range 3 .. 3;
           Slave_V4       at Slave_Byte  range 4 .. 4;
           Slave_V5       at Slave_Byte  range 5 .. 5;
           Slave_V6       at Slave_Byte  range 6 .. 6;
           Slave_V7       at Slave_Byte  range 7 .. 7;
        end record;

Now to switch between machines, all that is necessary is to set the
boolean constant `Master_Byte_First' in an appropriate manner.


File: gnat_rm.info,  Node: Pragma Pack for Arrays,  Next: Pragma Pack for Records,  Prev: Effect of Bit_Order on Byte Ordering,  Up: Representation Clauses and Pragmas

6.10 Pragma Pack for Arrays
===========================

Pragma `Pack' applied to an array has no effect unless the component
type is packable.  For a component type to be packable, it must be one
of the following cases:

   * Any scalar type

   * Any type whose size is specified with a size clause

   * Any packed array type with a static size

For all these cases, if the component subtype size is in the range 1
through 63, then the effect of the pragma `Pack' is exactly as though a
component size were specified giving the component subtype size.  For
example if we have:

        type r is range 0 .. 17;

        type ar is array (1 .. 8) of r;
        pragma Pack (ar);

Then the component size of `ar' will be set to 5 (i.e. to `r'size', and
the size of the array `ar' will be exactly 40 bits.

   Note that in some cases this rather fierce approach to packing can
produce unexpected effects.  For example, in Ada 95, type Natural
typically has a size of 31, meaning that if you pack an array of
Natural, you get 31-bit close packing, which saves a few bits, but
results in far less efficient access.  Since many other Ada compilers
will ignore such a packing request, GNAT will generate a warning on
some uses of pragma `Pack' that it guesses might not be what is
intended.  You can easily remove this warning by using an explicit
`Component_Size' setting instead, which never generates a warning,
since the intention of the programmer is clear in this case.

   GNAT treats packed arrays in one of two ways.  If the size of the
array is known at compile time and is less than 64 bits, then
internally the array is represented as a single modular type, of
exactly the appropriate number of bits.  If the length is greater than
63 bits, or is not known at compile time, then the packed array is
represented as an array of bytes, and the length is always a multiple
of 8 bits.

   Note that to represent a packed array as a modular type, the
alignment must be suitable for the modular type involved. For example,
on typical machines a 32-bit packed array will be represented by a
32-bit modular integer with an alignment of four bytes. If you
explicitly override the default alignment with an alignment clause that
is too small, the modular representation cannot be used. For example,
consider the following set of declarations:

        type R is range 1 .. 3;
        type S is array (1 .. 31) of R;
        for S'Component_Size use 2;
        for S'Size use 62;
        for S'Alignment use 1;

If the alignment clause were not present, then a 62-bit modular
representation would be chosen (typically with an alignment of 4 or 8
bytes depending on the target). But the default alignment is overridden
with the explicit alignment clause. This means that the modular
representation cannot be used, and instead the array of bytes
representation must be used, meaning that the length must be a multiple
of 8. Thus the above set of declarations will result in a diagnostic
rejecting the size clause and noting that the minimum size allowed is
64.

   One special case that is worth noting occurs when the base type of
the component size is 8/16/32 and the subtype is one bit less. Notably
this occurs with subtype `Natural'. Consider:

        type Arr is array (1 .. 32) of Natural;
        pragma Pack (Arr);

In all commonly used Ada 83 compilers, this pragma Pack would be
ignored, since typically `Natural'Size' is 32 in Ada 83, and in any
case most Ada 83 compilers did not attempt 31 bit packing.

   In Ada 95, `Natural'Size' is required to be 31. Furthermore, GNAT
really does pack 31-bit subtype to 31 bits. This may result in a
substantial unintended performance penalty when porting legacy Ada 83
code. To help prevent this, GNAT generates a warning in such cases. If
you really want 31 bit packing in a case like this, you can set the
component size explicitly:

        type Arr is array (1 .. 32) of Natural;
        for Arr'Component_Size use 31;

Here 31-bit packing is achieved as required, and no warning is
generated, since in this case the programmer intention is clear.


File: gnat_rm.info,  Node: Pragma Pack for Records,  Next: Record Representation Clauses,  Prev: Pragma Pack for Arrays,  Up: Representation Clauses and Pragmas

6.11 Pragma Pack for Records
============================

Pragma `Pack' applied to a record will pack the components to reduce
wasted space from alignment gaps and by reducing the amount of space
taken by components.  We distinguish between _packable_ components and
_non-packable_ components.  Components of the following types are
considered packable:
   * All primitive types are packable.

   * Small packed arrays, whose size does not exceed 64 bits, and where
     the size is statically known at compile time, are represented
     internally as modular integers, and so they are also packable.


All packable components occupy the exact number of bits corresponding to
their `Size' value, and are packed with no padding bits, i.e. they can
start on an arbitrary bit boundary.

   All other types are non-packable, they occupy an integral number of
storage units, and are placed at a boundary corresponding to their
alignment requirements.

   For example, consider the record

        type Rb1 is array (1 .. 13) of Boolean;
        pragma Pack (rb1);

        type Rb2 is array (1 .. 65) of Boolean;
        pragma Pack (rb2);

        type x2 is record
           l1 : Boolean;
           l2 : Duration;
           l3 : Float;
           l4 : Boolean;
           l5 : Rb1;
           l6 : Rb2;
        end record;
        pragma Pack (x2);

The representation for the record x2 is as follows:

     for x2'Size use 224;
     for x2 use record
        l1 at  0 range  0 .. 0;
        l2 at  0 range  1 .. 64;
        l3 at 12 range  0 .. 31;
        l4 at 16 range  0 .. 0;
        l5 at 16 range  1 .. 13;
        l6 at 18 range  0 .. 71;
     end record;

Studying this example, we see that the packable fields `l1' and `l2' are
of length equal to their sizes, and placed at specific bit boundaries
(and not byte boundaries) to eliminate padding.  But `l3' is of a
non-packable float type, so it is on the next appropriate alignment
boundary.

   The next two fields are fully packable, so `l4' and `l5' are
minimally packed with no gaps.  However, type `Rb2' is a packed array
that is longer than 64 bits, so it is itself non-packable.  Thus the
`l6' field is aligned to the next byte boundary, and takes an integral
number of bytes, i.e. 72 bits.


File: gnat_rm.info,  Node: Record Representation Clauses,  Next: Enumeration Clauses,  Prev: Pragma Pack for Records,  Up: Representation Clauses and Pragmas

6.12 Record Representation Clauses
==================================

Record representation clauses may be given for all record types,
including types obtained by record extension.  Component clauses are
allowed for any static component.  The restrictions on component
clauses depend on the type of the component.

   For all components of an elementary type, the only restriction on
component clauses is that the size must be at least the 'Size value of
the type (actually the Value_Size).  There are no restrictions due to
alignment, and such components may freely cross storage boundaries.

   Packed arrays with a size up to and including 64 bits are represented
internally using a modular type with the appropriate number of bits, and
thus the same lack of restriction applies.  For example, if you declare:

        type R is array (1 .. 49) of Boolean;
        pragma Pack (R);
        for R'Size use 49;

then a component clause for a component of type R may start on any
specified bit boundary, and may specify a value of 49 bits or greater.

   For packed bit arrays that are longer than 64 bits, there are two
cases. If the component size is a power of 2 (1,2,4,8,16,32 bits),
including the important case of single bits or boolean values, then
there are no limitations on placement of such components, and they may
start and end at arbitrary bit boundaries.

   If the component size is not a power of 2 (e.g. 3 or 5), then an
array of this type longer than 64 bits must always be placed on on a
storage unit (byte) boundary and occupy an integral number of storage
units (bytes). Any component clause that does not meet this requirement
will be rejected.

   Any aliased component, or component of an aliased type, must have
its normal alignment and size. A component clause that does not meet
this requirement will be rejected.

   The tag field of a tagged type always occupies an address sized
field at the start of the record.  No component clause may attempt to
overlay this tag. When a tagged type appears as a component, the tag
field must have proper alignment

   In the case of a record extension T1, of a type T, no component
clause applied to the type T1 can specify a storage location that would
overlap the first T'Size bytes of the record.

   For all other component types, including non-bit-packed arrays, the
component can be placed at an arbitrary bit boundary, so for example,
the following is permitted:

        type R is array (1 .. 10) of Boolean;
        for R'Size use 80;

        type Q is record
           G, H : Boolean;
           L, M : R;
        end record;

        for Q use record
           G at 0 range  0 ..   0;
           H at 0 range  1 ..   1;
           L at 0 range  2 ..  81;
           R at 0 range 82 .. 161;
        end record;

Note: the above rules apply to recent releases of GNAT 5.  In GNAT 3,
there are more severe restrictions on larger components.  For
non-primitive types, including packed arrays with a size greater than
64 bits, component clauses must respect the alignment requirement of the
type, in particular, always starting on a byte boundary, and the length
must be a multiple of the storage unit.


File: gnat_rm.info,  Node: Enumeration Clauses,  Next: Address Clauses,  Prev: Record Representation Clauses,  Up: Representation Clauses and Pragmas

6.13 Enumeration Clauses
========================

The only restriction on enumeration clauses is that the range of values
must be representable.  For the signed case, if one or more of the
representation values are negative, all values must be in the range:

        System.Min_Int .. System.Max_Int

For the unsigned case, where all values are non negative, the values
must be in the range:

        0 .. System.Max_Binary_Modulus;

A _confirming_ representation clause is one in which the values range
from 0 in sequence, i.e. a clause that confirms the default
representation for an enumeration type.  Such a confirming
representation is permitted by these rules, and is specially recognized
by the compiler so that no extra overhead results from the use of such
a clause.

   If an array has an index type which is an enumeration type to which
an enumeration clause has been applied, then the array is stored in a
compact manner.  Consider the declarations:

        type r is (A, B, C);
        for r use (A => 1, B => 5, C => 10);
        type t is array (r) of Character;

The array type t corresponds to a vector with exactly three elements and
has a default size equal to `3*Character'Size'.  This ensures efficient
use of space, but means that accesses to elements of the array will
incur the overhead of converting representation values to the
corresponding positional values, (i.e. the value delivered by the `Pos'
attribute).


File: gnat_rm.info,  Node: Address Clauses,  Next: Effect of Convention on Representation,  Prev: Enumeration Clauses,  Up: Representation Clauses and Pragmas

6.14 Address Clauses
====================

The reference manual allows a general restriction on representation
clauses, as found in RM 13.1(22):

     An implementation need not support representation items containing
     nonstatic expressions, except that an implementation should
     support a representation item for a given entity if each nonstatic
     expression in the representation item is a name that statically
     denotes a constant declared before the entity.

In practice this is applicable only to address clauses, since this is
the only case in which a non-static expression is permitted by the
syntax.  As the AARM notes in sections 13.1 (22.a-22.h):

       22.a   Reason: This is to avoid the following sort of thing:

       22.b        X : Integer := F(...);
                   Y : Address := G(...);
                   for X'Address use Y;

       22.c   In the above, we have to evaluate the
              initialization expression for X before we
              know where to put the result.  This seems
              like an unreasonable implementation burden.

       22.d   The above code should instead be written
              like this:

       22.e        Y : constant Address := G(...);
                   X : Integer := F(...);
                   for X'Address use Y;

       22.f   This allows the expression "Y" to be safely
              evaluated before X is created.

       22.g   The constant could be a formal parameter of mode in.

       22.h   An implementation can support other nonstatic
              expressions if it wants to.  Expressions of type
              Address are hardly ever static, but their value
              might be known at compile time anyway in many
              cases.

GNAT does indeed permit many additional cases of non-static
expressions.  In particular, if the type involved is elementary there
are no restrictions (since in this case, holding a temporary copy of
the initialization value, if one is present, is inexpensive).  In
addition, if there is no implicit or explicit initialization, then
there are no restrictions.  GNAT will reject only the case where all
three of these conditions hold:

   * The type of the item is non-elementary (e.g. a record or array).

   * There is explicit or implicit initialization required for the
     object.  Note that access values are always implicitly
     initialized, and also in GNAT, certain bit-packed arrays (those
     having a dynamic length or a length greater than 64) will also be
     implicitly initialized to zero.

   * The address value is non-static.  Here GNAT is more permissive
     than the RM, and allows the address value to be the address of a
     previously declared stand-alone variable, as long as it does not
     itself have an address clause.

                     Anchor  : Some_Initialized_Type;
                     Overlay : Some_Initialized_Type;
                     for Overlay'Address use Anchor'Address;

     However, the prefix of the address clause cannot be an array
     component, or a component of a discriminated record.


As noted above in section 22.h, address values are typically
non-static.  In particular the To_Address function, even if applied to
a literal value, is a non-static function call.  To avoid this minor
annoyance, GNAT provides the implementation defined attribute
'To_Address.  The following two expressions have identical values:

        To_Address (16#1234_0000#)
        System'To_Address (16#1234_0000#);

except that the second form is considered to be a static expression, and
thus when used as an address clause value is always permitted.

Additionally, GNAT treats as static an address clause that is an
unchecked_conversion of a static integer value.  This simplifies the
porting of legacy code, and provides a portable equivalent to the GNAT
attribute `To_Address'.

   Another issue with address clauses is the interaction with alignment
requirements.  When an address clause is given for an object, the
address value must be consistent with the alignment of the object
(which is usually the same as the alignment of the type of the object).
If an address clause is given that specifies an inappropriately
aligned address value, then the program execution is erroneous.

   Since this source of erroneous behavior can have unfortunate
effects, GNAT checks (at compile time if possible, generating a
warning, or at execution time with a run-time check) that the alignment
is appropriate.  If the run-time check fails, then `Program_Error' is
raised.  This run-time check is suppressed if range checks are
suppressed, or if `pragma Restrictions (No_Elaboration_Code)' is in
effect.

   An address clause cannot be given for an exported object.  More
understandably the real restriction is that objects with an address
clause cannot be exported.  This is because such variables are not
defined by the Ada program, so there is no external object to export.

   It is permissible to give an address clause and a pragma Import for
the same object.  In this case, the variable is not really defined by
the Ada program, so there is no external symbol to be linked.  The link
name and the external name are ignored in this case.  The reason that
we allow this combination is that it provides a useful idiom to avoid
unwanted initializations on objects with address clauses.

   When an address clause is given for an object that has implicit or
explicit initialization, then by default initialization takes place.
This means that the effect of the object declaration is to overwrite the
memory at the specified address.  This is almost always not what the
programmer wants, so GNAT will output a warning:

       with System;
       package G is
          type R is record
             M : Integer := 0;
          end record;

          Ext : R;
          for Ext'Address use System'To_Address (16#1234_1234#);
              |
       >>> warning: implicit initialization of "Ext" may
           modify overlaid storage
       >>> warning: use pragma Import for "Ext" to suppress
           initialization (RM B(24))

       end G;

As indicated by the warning message, the solution is to use a (dummy)
pragma Import to suppress this initialization.  The pragma tell the
compiler that the object is declared and initialized elsewhere.  The
following package compiles without warnings (and the initialization is
suppressed):

        with System;
        package G is
           type R is record
              M : Integer := 0;
           end record;

           Ext : R;
           for Ext'Address use System'To_Address (16#1234_1234#);
           pragma Import (Ada, Ext);
        end G;

A final issue with address clauses involves their use for overlaying
variables, as in the following example: 

       A : Integer;
       B : Integer;
       for B'Address use A'Address;

or alternatively, using the form recommended by the RM:

       A    : Integer;
       Addr : constant Address := A'Address;
       B    : Integer;
       for B'Address use Addr;

In both of these cases, `A' and `B' become aliased to one another via
the address clause. This use of address clauses to overlay variables,
achieving an effect similar to unchecked conversion was erroneous in
Ada 83, but in Ada 95 the effect is implementation defined.
Furthermore, the Ada 95 RM specifically recommends that in a situation
like this, `B' should be subject to the following implementation advice
(RM 13.3(19)):

     19  If the Address of an object is specified, or it is imported
     or exported, then the implementation should not perform
     optimizations based on assumptions of no aliases.

GNAT follows this recommendation, and goes further by also applying
this recommendation to the overlaid variable (`A' in the above example)
in this case. This means that the overlay works "as expected", in that
a modification to one of the variables will affect the value of the
other.


File: gnat_rm.info,  Node: Effect of Convention on Representation,  Next: Determining the Representations chosen by GNAT,  Prev: Address Clauses,  Up: Representation Clauses and Pragmas

6.15 Effect of Convention on Representation
===========================================

Normally the specification of a foreign language convention for a type
or an object has no effect on the chosen representation.  In
particular, the representation chosen for data in GNAT generally meets
the standard system conventions, and for example records are laid out
in a manner that is consistent with C.  This means that specifying
convention C (for example) has no effect.

   There are three exceptions to this general rule:

   * Convention Fortran and array subtypes If pragma Convention Fortran
     is specified for an array subtype, then in accordance with the
     implementation advice in section 3.6.2(11) of the Ada Reference
     Manual, the array will be stored in a Fortran-compatible
     column-major manner, instead of the normal default row-major order.

   * Convention C and enumeration types GNAT normally stores
     enumeration types in 8, 16, or 32 bits as required to accommodate
     all values of the type.  For example, for the enumeration type
     declared by:

             type Color is (Red, Green, Blue);

     8 bits is sufficient to store all values of the type, so by
     default, objects of type `Color' will be represented using 8 bits.
     However, normal C convention is to use 32 bits for all enum
     values in C, since enum values are essentially of type int.  If
     pragma `Convention C' is specified for an Ada enumeration type,
     then the size is modified as necessary (usually to 32 bits) to be
     consistent with the C convention for enum values.

   * Convention C/Fortran and Boolean types In C, the usual convention
     for boolean values, that is values used for conditions, is that
     zero represents false, and nonzero values represent true.  In Ada,
     the normal convention is that two specific values, typically 0/1,
     are used to represent false/true respectively.

     Fortran has a similar convention for `LOGICAL' values (any nonzero
     value represents true).

     To accommodate the Fortran and C conventions, if a pragma
     Convention specifies C or Fortran convention for a derived
     Boolean, as in the following example:

             type C_Switch is new Boolean;
             pragma Convention (C, C_Switch);

     then the GNAT generated code will treat any nonzero value as true.
     For truth values generated by GNAT, the conventional value 1 will
     be used for True, but when one of these values is read, any
     nonzero value is treated as True.



File: gnat_rm.info,  Node: Determining the Representations chosen by GNAT,  Prev: Effect of Convention on Representation,  Up: Representation Clauses and Pragmas

6.16 Determining the Representations chosen by GNAT
===================================================

Although the descriptions in this section are intended to be complete,
it is often easier to simply experiment to see what GNAT accepts and
what the effect is on the layout of types and objects.

   As required by the Ada RM, if a representation clause is not
accepted, then it must be rejected as illegal by the compiler.
However, when a representation clause or pragma is accepted, there can
still be questions of what the compiler actually does.  For example, if
a partial record representation clause specifies the location of some
components and not others, then where are the non-specified components
placed? Or if pragma `Pack' is used on a record, then exactly where are
the resulting fields placed? The section on pragma `Pack' in this
chapter can be used to answer the second question, but it is often
easier to just see what the compiler does.

   For this purpose, GNAT provides the option `-gnatR'.  If you compile
with this option, then the compiler will output information on the
actual representations chosen, in a format similar to source
representation clauses.  For example, if we compile the package:

     package q is
        type r (x : boolean) is tagged record
           case x is
              when True => S : String (1 .. 100);
              when False => null;
           end case;
        end record;

        type r2 is new r (false) with record
           y2 : integer;
        end record;

        for r2 use record
           y2 at 16 range 0 .. 31;
        end record;

        type x is record
           y : character;
        end record;

        type x1 is array (1 .. 10) of x;
        for x1'component_size use 11;

        type ia is access integer;

        type Rb1 is array (1 .. 13) of Boolean;
        pragma Pack (rb1);

        type Rb2 is array (1 .. 65) of Boolean;
        pragma Pack (rb2);

        type x2 is record
           l1 : Boolean;
           l2 : Duration;
           l3 : Float;
           l4 : Boolean;
           l5 : Rb1;
           l6 : Rb2;
        end record;
        pragma Pack (x2);
     end q;

using the switch `-gnatR' we obtain the following output:

     Representation information for unit q
     -------------------------------------

     for r'Size use ??;
     for r'Alignment use 4;
     for r use record
        x    at 4 range  0 .. 7;
        _tag at 0 range  0 .. 31;
        s    at 5 range  0 .. 799;
     end record;

     for r2'Size use 160;
     for r2'Alignment use 4;
     for r2 use record
        x       at  4 range  0 .. 7;
        _tag    at  0 range  0 .. 31;
        _parent at  0 range  0 .. 63;
        y2      at 16 range  0 .. 31;
     end record;

     for x'Size use 8;
     for x'Alignment use 1;
     for x use record
        y at 0 range  0 .. 7;
     end record;

     for x1'Size use 112;
     for x1'Alignment use 1;
     for x1'Component_Size use 11;

     for rb1'Size use 13;
     for rb1'Alignment use 2;
     for rb1'Component_Size use 1;

     for rb2'Size use 72;
     for rb2'Alignment use 1;
     for rb2'Component_Size use 1;

     for x2'Size use 224;
     for x2'Alignment use 4;
     for x2 use record
        l1 at  0 range  0 .. 0;
        l2 at  0 range  1 .. 64;
        l3 at 12 range  0 .. 31;
        l4 at 16 range  0 .. 0;
        l5 at 16 range  1 .. 13;
        l6 at 18 range  0 .. 71;
     end record;

The Size values are actually the Object_Size, i.e. the default size that
will be allocated for objects of the type.  The ?? size for type r
indicates that we have a variant record, and the actual size of objects
will depend on the discriminant value.

   The Alignment values show the actual alignment chosen by the compiler
for each record or array type.

   The record representation clause for type r shows where all fields
are placed, including the compiler generated tag field (whose location
cannot be controlled by the programmer).

   The record representation clause for the type extension r2 shows all
the fields present, including the parent field, which is a copy of the
fields of the parent type of r2, i.e. r1.

   The component size and size clauses for types rb1 and rb2 show the
exact effect of pragma `Pack' on these arrays, and the record
representation clause for type x2 shows how pragma `Pack' affects this
record type.

   In some cases, it may be useful to cut and paste the representation
clauses generated by the compiler into the original source to fix and
guarantee the actual representation to be used.


File: gnat_rm.info,  Node: Standard Library Routines,  Next: The Implementation of Standard I/O,  Prev: Representation Clauses and Pragmas,  Up: Top

7 Standard Library Routines
***************************

The Ada 95 Reference Manual contains in Annex A a full description of an
extensive set of standard library routines that can be used in any Ada
program, and which must be provided by all Ada compilers.  They are
analogous to the standard C library used by C programs.

   GNAT implements all of the facilities described in annex A, and for
most purposes the description in the Ada 95 reference manual, or
appropriate Ada text book, will be sufficient for making use of these
facilities.

   In the case of the input-output facilities, *Note The Implementation
of Standard I/O::, gives details on exactly how GNAT interfaces to the
file system.  For the remaining packages, the Ada 95 reference manual
should be sufficient.  The following is a list of the packages included,
together with a brief description of the functionality that is provided.

   For completeness, references are included to other predefined library
routines defined in other sections of the Ada 95 reference manual
(these are cross-indexed from annex A).

`Ada (A.2)'
     This is a parent package for all the standard library packages.
     It is usually included implicitly in your program, and itself
     contains no useful data or routines.

`Ada.Calendar (9.6)'
     `Calendar' provides time of day access, and routines for
     manipulating times and durations.

`Ada.Characters (A.3.1)'
     This is a dummy parent package that contains no useful entities

`Ada.Characters.Handling (A.3.2)'
     This package provides some basic character handling capabilities,
     including classification functions for classes of characters (e.g.
     test for letters, or digits).

`Ada.Characters.Latin_1 (A.3.3)'
     This package includes a complete set of definitions of the
     characters that appear in type CHARACTER.  It is useful for
     writing programs that will run in international environments.  For
     example, if you want an upper case E with an acute accent in a
     string, it is often better to use the definition of `UC_E_Acute'
     in this package.  Then your program will print in an
     understandable manner even if your environment does not support
     these extended characters.

`Ada.Command_Line (A.15)'
     This package provides access to the command line parameters and
     the name of the current program (analogous to the use of `argc'
     and `argv' in C), and also allows the exit status for the program
     to be set in a system-independent manner.

`Ada.Decimal (F.2)'
     This package provides constants describing the range of decimal
     numbers implemented, and also a decimal divide routine (analogous
     to the COBOL verb DIVIDE .. GIVING .. REMAINDER ..)

`Ada.Direct_IO (A.8.4)'
     This package provides input-output using a model of a set of
     records of fixed-length, containing an arbitrary definite Ada
     type, indexed by an integer record number.

`Ada.Dynamic_Priorities (D.5)'
     This package allows the priorities of a task to be adjusted
     dynamically as the task is running.

`Ada.Exceptions (11.4.1)'
     This package provides additional information on exceptions, and
     also contains facilities for treating exceptions as data objects,
     and raising exceptions with associated messages.

`Ada.Finalization (7.6)'
     This package contains the declarations and subprograms to support
     the use of controlled types, providing for automatic
     initialization and finalization (analogous to the constructors and
     destructors of C++)

`Ada.Interrupts (C.3.2)'
     This package provides facilities for interfacing to interrupts,
     which includes the set of signals or conditions that can be raised
     and recognized as interrupts.

`Ada.Interrupts.Names (C.3.2)'
     This package provides the set of interrupt names (actually signal
     or condition names) that can be handled by GNAT.

`Ada.IO_Exceptions (A.13)'
     This package defines the set of exceptions that can be raised by
     use of the standard IO packages.

`Ada.Numerics'
     This package contains some standard constants and exceptions used
     throughout the numerics packages.  Note that the constants pi and
     e are defined here, and it is better to use these definitions than
     rolling your own.

`Ada.Numerics.Complex_Elementary_Functions'
     Provides the implementation of standard elementary functions (such
     as log and trigonometric functions) operating on complex numbers
     using the standard `Float' and the `Complex' and `Imaginary' types
     created by the package `Numerics.Complex_Types'.

`Ada.Numerics.Complex_Types'
     This is a predefined instantiation of
     `Numerics.Generic_Complex_Types' using `Standard.Float' to build
     the type `Complex' and `Imaginary'.

`Ada.Numerics.Discrete_Random'
     This package provides a random number generator suitable for
     generating random integer values from a specified range.

`Ada.Numerics.Float_Random'
     This package provides a random number generator suitable for
     generating uniformly distributed floating point values.

`Ada.Numerics.Generic_Complex_Elementary_Functions'
     This is a generic version of the package that provides the
     implementation of standard elementary functions (such as log and
     trigonometric functions) for an arbitrary complex type.

     The following predefined instantiations of this package are
     provided:

    `Short_Float'
          `Ada.Numerics.Short_Complex_Elementary_Functions'

    `Float'
          `Ada.Numerics.Complex_Elementary_Functions'

    `Long_Float'
          `Ada.Numerics.   Long_Complex_Elementary_Functions'

`Ada.Numerics.Generic_Complex_Types'
     This is a generic package that allows the creation of complex
     types, with associated complex arithmetic operations.

     The following predefined instantiations of this package exist
    `Short_Float'
          `Ada.Numerics.Short_Complex_Complex_Types'

    `Float'
          `Ada.Numerics.Complex_Complex_Types'

    `Long_Float'
          `Ada.Numerics.Long_Complex_Complex_Types'

`Ada.Numerics.Generic_Elementary_Functions'
     This is a generic package that provides the implementation of
     standard elementary functions (such as log an trigonometric
     functions) for an arbitrary float type.

     The following predefined instantiations of this package exist

    `Short_Float'
          `Ada.Numerics.Short_Elementary_Functions'

    `Float'
          `Ada.Numerics.Elementary_Functions'

    `Long_Float'
          `Ada.Numerics.Long_Elementary_Functions'

`Ada.Real_Time (D.8)'
     This package provides facilities similar to those of `Calendar',
     but operating with a finer clock suitable for real time control.
     Note that annex D requires that there be no backward clock jumps,
     and GNAT generally guarantees this behavior, but of course if the
     external clock on which the GNAT runtime depends is deliberately
     reset by some external event, then such a backward jump may occur.

`Ada.Sequential_IO (A.8.1)'
     This package provides input-output facilities for sequential files,
     which can contain a sequence of values of a single type, which can
     be any Ada type, including indefinite (unconstrained) types.

`Ada.Storage_IO (A.9)'
     This package provides a facility for mapping arbitrary Ada types
     to and from a storage buffer.  It is primarily intended for the
     creation of new IO packages.

`Ada.Streams (13.13.1)'
     This is a generic package that provides the basic support for the
     concept of streams as used by the stream attributes (`Input',
     `Output', `Read' and `Write').

`Ada.Streams.Stream_IO (A.12.1)'
     This package is a specialization of the type `Streams' defined in
     package `Streams' together with a set of operations providing
     Stream_IO capability.  The Stream_IO model permits both random and
     sequential access to a file which can contain an arbitrary set of
     values of one or more Ada types.

`Ada.Strings (A.4.1)'
     This package provides some basic constants used by the string
     handling packages.

`Ada.Strings.Bounded (A.4.4)'
     This package provides facilities for handling variable length
     strings.  The bounded model requires a maximum length.  It is thus
     somewhat more limited than the unbounded model, but avoids the use
     of dynamic allocation or finalization.

`Ada.Strings.Fixed (A.4.3)'
     This package provides facilities for handling fixed length strings.

`Ada.Strings.Maps (A.4.2)'
     This package provides facilities for handling character mappings
     and arbitrarily defined subsets of characters.  For instance it is
     useful in defining specialized translation tables.

`Ada.Strings.Maps.Constants (A.4.6)'
     This package provides a standard set of predefined mappings and
     predefined character sets.  For example, the standard upper to
     lower case conversion table is found in this package.  Note that
     upper to lower case conversion is non-trivial if you want to take
     the entire set of characters, including extended characters like E
     with an acute accent, into account.  You should use the mappings
     in this package (rather than adding 32 yourself) to do case
     mappings.

`Ada.Strings.Unbounded (A.4.5)'
     This package provides facilities for handling variable length
     strings.  The unbounded model allows arbitrary length strings, but
     requires the use of dynamic allocation and finalization.

`Ada.Strings.Wide_Bounded (A.4.7)'
`Ada.Strings.Wide_Fixed (A.4.7)'
`Ada.Strings.Wide_Maps (A.4.7)'
`Ada.Strings.Wide_Maps.Constants (A.4.7)'
`Ada.Strings.Wide_Unbounded (A.4.7)'
     These packages provide analogous capabilities to the corresponding
     packages without `Wide_' in the name, but operate with the types
     `Wide_String' and `Wide_Character' instead of `String' and
     `Character'.

`Ada.Strings.Wide_Wide_Bounded (A.4.7)'
`Ada.Strings.Wide_Wide_Fixed (A.4.7)'
`Ada.Strings.Wide_Wide_Maps (A.4.7)'
`Ada.Strings.Wide_Wide_Maps.Constants (A.4.7)'
`Ada.Strings.Wide_Wide_Unbounded (A.4.7)'
     These packages provide analogous capabilities to the corresponding
     packages without `Wide_' in the name, but operate with the types
     `Wide_Wide_String' and `Wide_Wide_Character' instead of `String'
     and `Character'.

`Ada.Synchronous_Task_Control (D.10)'
     This package provides some standard facilities for controlling task
     communication in a synchronous manner.

`Ada.Tags'
     This package contains definitions for manipulation of the tags of
     tagged values.

`Ada.Task_Attributes'
     This package provides the capability of associating arbitrary
     task-specific data with separate tasks.

`Ada.Text_IO'
     This package provides basic text input-output capabilities for
     character, string and numeric data.  The subpackages of this
     package are listed next.

`Ada.Text_IO.Decimal_IO'
     Provides input-output facilities for decimal fixed-point types

`Ada.Text_IO.Enumeration_IO'
     Provides input-output facilities for enumeration types.

`Ada.Text_IO.Fixed_IO'
     Provides input-output facilities for ordinary fixed-point types.

`Ada.Text_IO.Float_IO'
     Provides input-output facilities for float types.  The following
     predefined instantiations of this generic package are available:

    `Short_Float'
          `Short_Float_Text_IO'

    `Float'
          `Float_Text_IO'

    `Long_Float'
          `Long_Float_Text_IO'

`Ada.Text_IO.Integer_IO'
     Provides input-output facilities for integer types.  The following
     predefined instantiations of this generic package are available:

    `Short_Short_Integer'
          `Ada.Short_Short_Integer_Text_IO'

    `Short_Integer'
          `Ada.Short_Integer_Text_IO'

    `Integer'
          `Ada.Integer_Text_IO'

    `Long_Integer'
          `Ada.Long_Integer_Text_IO'

    `Long_Long_Integer'
          `Ada.Long_Long_Integer_Text_IO'

`Ada.Text_IO.Modular_IO'
     Provides input-output facilities for modular (unsigned) types

`Ada.Text_IO.Complex_IO (G.1.3)'
     This package provides basic text input-output capabilities for
     complex data.

`Ada.Text_IO.Editing (F.3.3)'
     This package contains routines for edited output, analogous to the
     use of pictures in COBOL.  The picture formats used by this
     package are a close copy of the facility in COBOL.

`Ada.Text_IO.Text_Streams (A.12.2)'
     This package provides a facility that allows Text_IO files to be
     treated as streams, so that the stream attributes can be used for
     writing arbitrary data, including binary data, to Text_IO files.

`Ada.Unchecked_Conversion (13.9)'
     This generic package allows arbitrary conversion from one type to
     another of the same size, providing for breaking the type safety in
     special circumstances.

     If the types have the same Size (more accurately the same
     Value_Size), then the effect is simply to transfer the bits from
     the source to the target type without any modification.  This
     usage is well defined, and for simple types whose representation
     is typically the same across all implementations, gives a portable
     method of performing such conversions.

     If the types do not have the same size, then the result is
     implementation defined, and thus may be non-portable.  The
     following describes how GNAT handles such unchecked conversion
     cases.

     If the types are of different sizes, and are both discrete types,
     then the effect is of a normal type conversion without any
     constraint checking.  In particular if the result type has a
     larger size, the result will be zero or sign extended.  If the
     result type has a smaller size, the result will be truncated by
     ignoring high order bits.

     If the types are of different sizes, and are not both discrete
     types, then the conversion works as though pointers were created
     to the source and target, and the pointer value is converted.  The
     effect is that bits are copied from successive low order storage
     units and bits of the source up to the length of the target type.

     A warning is issued if the lengths differ, since the effect in this
     case is implementation dependent, and the above behavior may not
     match that of some other compiler.

     A pointer to one type may be converted to a pointer to another
     type using unchecked conversion.  The only case in which the
     effect is undefined is when one or both pointers are pointers to
     unconstrained array types.  In this case, the bounds information
     may get incorrectly transferred, and in particular, GNAT uses
     double size pointers for such types, and it is meaningless to
     convert between such pointer types.  GNAT will issue a warning if
     the alignment of the target designated type is more strict than
     the alignment of the source designated type (since the result may
     be unaligned in this case).

     A pointer other than a pointer to an unconstrained array type may
     be converted to and from System.Address.  Such usage is common in
     Ada 83 programs, but note that Ada.Address_To_Access_Conversions
     is the preferred method of performing such conversions in Ada 95.
     Neither unchecked conversion nor Ada.Address_To_Access_Conversions
     should be used in conjunction with pointers to unconstrained
     objects, since the bounds information cannot be handled correctly
     in this case.

`Ada.Unchecked_Deallocation (13.11.2)'
     This generic package allows explicit freeing of storage previously
     allocated by use of an allocator.

`Ada.Wide_Text_IO (A.11)'
     This package is similar to `Ada.Text_IO', except that the external
     file supports wide character representations, and the internal
     types are `Wide_Character' and `Wide_String' instead of `Character'
     and `String'.  It contains generic subpackages listed next.

`Ada.Wide_Text_IO.Decimal_IO'
     Provides input-output facilities for decimal fixed-point types

`Ada.Wide_Text_IO.Enumeration_IO'
     Provides input-output facilities for enumeration types.

`Ada.Wide_Text_IO.Fixed_IO'
     Provides input-output facilities for ordinary fixed-point types.

`Ada.Wide_Text_IO.Float_IO'
     Provides input-output facilities for float types.  The following
     predefined instantiations of this generic package are available:

    `Short_Float'
          `Short_Float_Wide_Text_IO'

    `Float'
          `Float_Wide_Text_IO'

    `Long_Float'
          `Long_Float_Wide_Text_IO'

`Ada.Wide_Text_IO.Integer_IO'
     Provides input-output facilities for integer types.  The following
     predefined instantiations of this generic package are available:

    `Short_Short_Integer'
          `Ada.Short_Short_Integer_Wide_Text_IO'

    `Short_Integer'
          `Ada.Short_Integer_Wide_Text_IO'

    `Integer'
          `Ada.Integer_Wide_Text_IO'

    `Long_Integer'
          `Ada.Long_Integer_Wide_Text_IO'

    `Long_Long_Integer'
          `Ada.Long_Long_Integer_Wide_Text_IO'

`Ada.Wide_Text_IO.Modular_IO'
     Provides input-output facilities for modular (unsigned) types

`Ada.Wide_Text_IO.Complex_IO (G.1.3)'
     This package is similar to `Ada.Text_IO.Complex_IO', except that
     the external file supports wide character representations.

`Ada.Wide_Text_IO.Editing (F.3.4)'
     This package is similar to `Ada.Text_IO.Editing', except that the
     types are `Wide_Character' and `Wide_String' instead of
     `Character' and `String'.

`Ada.Wide_Text_IO.Streams (A.12.3)'
     This package is similar to `Ada.Text_IO.Streams', except that the
     types are `Wide_Character' and `Wide_String' instead of
     `Character' and `String'.

`Ada.Wide_Wide_Text_IO (A.11)'
     This package is similar to `Ada.Text_IO', except that the external
     file supports wide character representations, and the internal
     types are `Wide_Character' and `Wide_String' instead of `Character'
     and `String'.  It contains generic subpackages listed next.

`Ada.Wide_Wide_Text_IO.Decimal_IO'
     Provides input-output facilities for decimal fixed-point types

`Ada.Wide_Wide_Text_IO.Enumeration_IO'
     Provides input-output facilities for enumeration types.

`Ada.Wide_Wide_Text_IO.Fixed_IO'
     Provides input-output facilities for ordinary fixed-point types.

`Ada.Wide_Wide_Text_IO.Float_IO'
     Provides input-output facilities for float types.  The following
     predefined instantiations of this generic package are available:

    `Short_Float'
          `Short_Float_Wide_Wide_Text_IO'

    `Float'
          `Float_Wide_Wide_Text_IO'

    `Long_Float'
          `Long_Float_Wide_Wide_Text_IO'

`Ada.Wide_Wide_Text_IO.Integer_IO'
     Provides input-output facilities for integer types.  The following
     predefined instantiations of this generic package are available:

    `Short_Short_Integer'
          `Ada.Short_Short_Integer_Wide_Wide_Text_IO'

    `Short_Integer'
          `Ada.Short_Integer_Wide_Wide_Text_IO'

    `Integer'
          `Ada.Integer_Wide_Wide_Text_IO'

    `Long_Integer'
          `Ada.Long_Integer_Wide_Wide_Text_IO'

    `Long_Long_Integer'
          `Ada.Long_Long_Integer_Wide_Wide_Text_IO'

`Ada.Wide_Wide_Text_IO.Modular_IO'
     Provides input-output facilities for modular (unsigned) types

`Ada.Wide_Wide_Text_IO.Complex_IO (G.1.3)'
     This package is similar to `Ada.Text_IO.Complex_IO', except that
     the external file supports wide character representations.

`Ada.Wide_Wide_Text_IO.Editing (F.3.4)'
     This package is similar to `Ada.Text_IO.Editing', except that the
     types are `Wide_Character' and `Wide_String' instead of
     `Character' and `String'.

`Ada.Wide_Wide_Text_IO.Streams (A.12.3)'
     This package is similar to `Ada.Text_IO.Streams', except that the
     types are `Wide_Character' and `Wide_String' instead of
     `Character' and `String'.


File: gnat_rm.info,  Node: The Implementation of Standard I/O,  Next: The GNAT Library,  Prev: Standard Library Routines,  Up: Top

8 The Implementation of Standard I/O
************************************

GNAT implements all the required input-output facilities described in
A.6 through A.14.  These sections of the Ada 95 reference manual
describe the required behavior of these packages from the Ada point of
view, and if you are writing a portable Ada program that does not need
to know the exact manner in which Ada maps to the outside world when it
comes to reading or writing external files, then you do not need to
read this chapter.  As long as your files are all regular files (not
pipes or devices), and as long as you write and read the files only
from Ada, the description in the Ada 95 reference manual is sufficient.

   However, if you want to do input-output to pipes or other devices,
such as the keyboard or screen, or if the files you are dealing with are
either generated by some other language, or to be read by some other
language, then you need to know more about the details of how the GNAT
implementation of these input-output facilities behaves.

   In this chapter we give a detailed description of exactly how GNAT
interfaces to the file system.  As always, the sources of the system are
available to you for answering questions at an even more detailed level,
but for most purposes the information in this chapter will suffice.

   Another reason that you may need to know more about how input-output
is implemented arises when you have a program written in mixed languages
where, for example, files are shared between the C and Ada sections of
the same program.  GNAT provides some additional facilities, in the form
of additional child library packages, that facilitate this sharing, and
these additional facilities are also described in this chapter.

* Menu:

* Standard I/O Packages::
* FORM Strings::
* Direct_IO::
* Sequential_IO::
* Text_IO::
* Wide_Text_IO::
* Wide_Wide_Text_IO::
* Stream_IO::
* Shared Files::
* Open Modes::
* Operations on C Streams::
* Interfacing to C Streams::


File: gnat_rm.info,  Node: Standard I/O Packages,  Next: FORM Strings,  Up: The Implementation of Standard I/O

8.1 Standard I/O Packages
=========================

The Standard I/O packages described in Annex A for

   * Ada.Text_IO

   * Ada.Text_IO.Complex_IO

   * Ada.Text_IO.Text_Streams

   * Ada.Wide_Text_IO

   * Ada.Wide_Text_IO.Complex_IO

   * Ada.Wide_Text_IO.Text_Streams

   * Ada.Wide_Wide_Text_IO

   * Ada.Wide_Wide_Text_IO.Complex_IO

   * Ada.Wide_Wide_Text_IO.Text_Streams

   * Ada.Stream_IO

   * Ada.Sequential_IO

   * Ada.Direct_IO

are implemented using the C library streams facility; where

   * All files are opened using `fopen'.

   * All input/output operations use `fread'/`fwrite'.

There is no internal buffering of any kind at the Ada library level.
The only buffering is that provided at the system level in the
implementation of the library routines that support streams. This
facilitates shared use of these streams by mixed language programs.
Note though that system level buffering is explictly enabled at
elaboration of the standard I/O packages and that can have an impact on
mixed language programs, in particular those using I/O before calling
the Ada elaboration routine (e.g. adainit). It is recommended to call
the Ada elaboration routine before performing any I/O or when
impractical, flush the common I/O streams and in particular
Standard_Output before elaborating the Ada code.


File: gnat_rm.info,  Node: FORM Strings,  Next: Direct_IO,  Prev: Standard I/O Packages,  Up: The Implementation of Standard I/O

8.2 FORM Strings
================

The format of a FORM string in GNAT is:

     "keyword=value,keyword=value,...,keyword=value"

where letters may be in upper or lower case, and there are no spaces
between values.  The order of the entries is not important.  Currently
there are two keywords defined.

     SHARED=[YES|NO]
     WCEM=[n|h|u|s\e]

The use of these parameters is described later in this section.


File: gnat_rm.info,  Node: Direct_IO,  Next: Sequential_IO,  Prev: FORM Strings,  Up: The Implementation of Standard I/O

8.3 Direct_IO
=============

Direct_IO can only be instantiated for definite types.  This is a
restriction of the Ada language, which means that the records are fixed
length (the length being determined by `TYPE'Size', rounded up to the
next storage unit boundary if necessary).

   The records of a Direct_IO file are simply written to the file in
index sequence, with the first record starting at offset zero, and
subsequent records following.  There is no control information of any
kind.  For example, if 32-bit integers are being written, each record
takes 4-bytes, so the record at index K starts at offset (K-1)*4.

   There is no limit on the size of Direct_IO files, they are expanded
as necessary to accommodate whatever records are written to the file.


File: gnat_rm.info,  Node: Sequential_IO,  Next: Text_IO,  Prev: Direct_IO,  Up: The Implementation of Standard I/O

8.4 Sequential_IO
=================

Sequential_IO may be instantiated with either a definite (constrained)
or indefinite (unconstrained) type.

   For the definite type case, the elements written to the file are
simply the memory images of the data values with no control information
of any kind.  The resulting file should be read using the same type, no
validity checking is performed on input.

   For the indefinite type case, the elements written consist of two
parts.  First is the size of the data item, written as the memory image
of a `Interfaces.C.size_t' value, followed by the memory image of the
data value.  The resulting file can only be read using the same
(unconstrained) type.  Normal assignment checks are performed on these
read operations, and if these checks fail, `Data_Error' is raised.  In
particular, in the array case, the lengths must match, and in the
variant record case, if the variable for a particular read operation is
constrained, the discriminants must match.

   Note that it is not possible to use Sequential_IO to write variable
length array items, and then read the data back into different length
arrays.  For example, the following will raise `Data_Error':

      package IO is new Sequential_IO (String);
      F : IO.File_Type;
      S : String (1..4);
      ...
      IO.Create (F)
      IO.Write (F, "hello!")
      IO.Reset (F, Mode=>In_File);
      IO.Read (F, S);
      Put_Line (S);

On some Ada implementations, this will print `hell', but the program is
clearly incorrect, since there is only one element in the file, and that
element is the string `hello!'.

   In Ada 95, this kind of behavior can be legitimately achieved using
Stream_IO, and this is the preferred mechanism.  In particular, the
above program fragment rewritten to use Stream_IO will work correctly.


File: gnat_rm.info,  Node: Text_IO,  Next: Wide_Text_IO,  Prev: Sequential_IO,  Up: The Implementation of Standard I/O

8.5 Text_IO
===========

Text_IO files consist of a stream of characters containing the following
special control characters:

     LF (line feed, 16#0A#) Line Mark
     FF (form feed, 16#0C#) Page Mark

A canonical Text_IO file is defined as one in which the following
conditions are met:

   * The character `LF' is used only as a line mark, i.e. to mark the
     end of the line.

   * The character `FF' is used only as a page mark, i.e. to mark the
     end of a page and consequently can appear only immediately
     following a `LF' (line mark) character.

   * The file ends with either `LF' (line mark) or `LF'-`FF' (line
     mark, page mark).  In the former case, the page mark is implicitly
     assumed to be present.

A file written using Text_IO will be in canonical form provided that no
explicit `LF' or `FF' characters are written using `Put' or `Put_Line'.
There will be no `FF' character at the end of the file unless an
explicit `New_Page' operation was performed before closing the file.

   A canonical Text_IO file that is a regular file, i.e. not a device
or a pipe, can be read using any of the routines in Text_IO.  The
semantics in this case will be exactly as defined in the Ada 95
reference manual and all the routines in Text_IO are fully implemented.

   A text file that does not meet the requirements for a canonical
Text_IO file has one of the following:

   * The file contains `FF' characters not immediately following a `LF'
     character.

   * The file contains `LF' or `FF' characters written by `Put' or
     `Put_Line', which are not logically considered to be line marks or
     page marks.

   * The file ends in a character other than `LF' or `FF', i.e. there
     is no explicit line mark or page mark at the end of the file.

Text_IO can be used to read such non-standard text files but subprograms
to do with line or page numbers do not have defined meanings.  In
particular, a `FF' character that does not follow a `LF' character may
or may not be treated as a page mark from the point of view of page and
line numbering.  Every `LF' character is considered to end a line, and
there is an implied `LF' character at the end of the file.

* Menu:

* Text_IO Stream Pointer Positioning::
* Text_IO Reading and Writing Non-Regular Files::
* Get_Immediate::
* Treating Text_IO Files as Streams::
* Text_IO Extensions::
* Text_IO Facilities for Unbounded Strings::


File: gnat_rm.info,  Node: Text_IO Stream Pointer Positioning,  Next: Text_IO Reading and Writing Non-Regular Files,  Up: Text_IO

8.5.1 Stream Pointer Positioning
--------------------------------

`Ada.Text_IO' has a definition of current position for a file that is
being read.  No internal buffering occurs in Text_IO, and usually the
physical position in the stream used to implement the file corresponds
to this logical position defined by Text_IO.  There are two exceptions:

   * After a call to `End_Of_Page' that returns `True', the stream is
     positioned past the `LF' (line mark) that precedes the page mark.
     Text_IO maintains an internal flag so that subsequent read
     operations properly handle the logical position which is unchanged
     by the `End_Of_Page' call.

   * After a call to `End_Of_File' that returns `True', if the Text_IO
     file was positioned before the line mark at the end of file before
     the call, then the logical position is unchanged, but the stream
     is physically positioned right at the end of file (past the line
     mark, and past a possible page mark following the line mark.
     Again Text_IO maintains internal flags so that subsequent read
     operations properly handle the logical position.

These discrepancies have no effect on the observable behavior of
Text_IO, but if a single Ada stream is shared between a C program and
Ada program, or shared (using `shared=yes' in the form string) between
two Ada files, then the difference may be observable in some situations.


File: gnat_rm.info,  Node: Text_IO Reading and Writing Non-Regular Files,  Next: Get_Immediate,  Prev: Text_IO Stream Pointer Positioning,  Up: Text_IO

8.5.2 Reading and Writing Non-Regular Files
-------------------------------------------

A non-regular file is a device (such as a keyboard), or a pipe.  Text_IO
can be used for reading and writing.  Writing is not affected and the
sequence of characters output is identical to the normal file case, but
for reading, the behavior of Text_IO is modified to avoid undesirable
look-ahead as follows:

   An input file that is not a regular file is considered to have no
page marks.  Any `Ascii.FF' characters (the character normally used for
a page mark) appearing in the file are considered to be data
characters.  In particular:

   * `Get_Line' and `Skip_Line' do not test for a page mark following a
     line mark.  If a page mark appears, it will be treated as a data
     character.

   * This avoids the need to wait for an extra character to be typed or
     entered from the pipe to complete one of these operations.

   * `End_Of_Page' always returns `False'

   * `End_Of_File' will return `False' if there is a page mark at the
     end of the file.

Output to non-regular files is the same as for regular files.  Page
marks may be written to non-regular files using `New_Page', but as noted
above they will not be treated as page marks on input if the output is
piped to another Ada program.

   Another important discrepancy when reading non-regular files is that
the end of file indication is not "sticky".  If an end of file is
entered, e.g. by pressing the <EOT> key, then end of file is signaled
once (i.e. the test `End_Of_File' will yield `True', or a read will
raise `End_Error'), but then reading can resume to read data past that
end of file indication, until another end of file indication is entered.


File: gnat_rm.info,  Node: Get_Immediate,  Next: Treating Text_IO Files as Streams,  Prev: Text_IO Reading and Writing Non-Regular Files,  Up: Text_IO

8.5.3 Get_Immediate
-------------------

Get_Immediate returns the next character (including control characters)
from the input file.  In particular, Get_Immediate will return LF or FF
characters used as line marks or page marks.  Such operations leave the
file positioned past the control character, and it is thus not treated
as having its normal function.  This means that page, line and column
counts after this kind of Get_Immediate call are set as though the mark
did not occur.  In the case where a Get_Immediate leaves the file
positioned between the line mark and page mark (which is not normally
possible), it is undefined whether the FF character will be treated as a
page mark.


File: gnat_rm.info,  Node: Treating Text_IO Files as Streams,  Next: Text_IO Extensions,  Prev: Get_Immediate,  Up: Text_IO

8.5.4 Treating Text_IO Files as Streams
---------------------------------------

The package `Text_IO.Streams' allows a Text_IO file to be treated as a
stream.  Data written to a Text_IO file in this stream mode is binary
data.  If this binary data contains bytes 16#0A# (`LF') or 16#0C#
(`FF'), the resulting file may have non-standard format.  Similarly if
read operations are used to read from a Text_IO file treated as a
stream, then `LF' and `FF' characters may be skipped and the effect is
similar to that described above for `Get_Immediate'.


File: gnat_rm.info,  Node: Text_IO Extensions,  Next: Text_IO Facilities for Unbounded Strings,  Prev: Treating Text_IO Files as Streams,  Up: Text_IO

8.5.5 Text_IO Extensions
------------------------

A package GNAT.IO_Aux in the GNAT library provides some useful
extensions to the standard `Text_IO' package:

   * function File_Exists (Name : String) return Boolean; Determines if
     a file of the given name exists.

   * function Get_Line return String; Reads a string from the standard
     input file.  The value returned is exactly the length of the line
     that was read.

   * function Get_Line (File : Ada.Text_IO.File_Type) return String;
     Similar, except that the parameter File specifies the file from
     which the string is to be read.



File: gnat_rm.info,  Node: Text_IO Facilities for Unbounded Strings,  Prev: Text_IO Extensions,  Up: Text_IO

8.5.6 Text_IO Facilities for Unbounded Strings
----------------------------------------------

The package `Ada.Strings.Unbounded.Text_IO' in library files
`a-suteio.ads/adb' contains some GNAT-specific subprograms useful for
Text_IO operations on unbounded strings:

   * function Get_Line (File : File_Type) return Unbounded_String;
     Reads a line from the specified file and returns the result as an
     unbounded string.

   * procedure Put (File : File_Type; U : Unbounded_String); Writes the
     value of the given unbounded string to the specified file Similar
     to the effect of `Put (To_String (U))' except that an extra copy
     is avoided.

   * procedure Put_Line (File : File_Type; U : Unbounded_String);
     Writes the value of the given unbounded string to the specified
     file, followed by a `New_Line'.  Similar to the effect of
     `Put_Line (To_String (U))' except that an extra copy is avoided.

In the above procedures, `File' is of type `Ada.Text_IO.File_Type' and
is optional.  If the parameter is omitted, then the standard input or
output file is referenced as appropriate.

   The package `Ada.Strings.Wide_Unbounded.Wide_Text_IO' in library
files `a-swuwti.ads' and `a-swuwti.adb' provides similar extended
`Wide_Text_IO' functionality for unbounded wide strings.

   The package `Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO' in
library files `a-szuzti.ads' and `a-szuzti.adb' provides similar
extended `Wide_Wide_Text_IO' functionality for unbounded wide wide
strings.


File: gnat_rm.info,  Node: Wide_Text_IO,  Next: Wide_Wide_Text_IO,  Prev: Text_IO,  Up: The Implementation of Standard I/O

8.6 Wide_Text_IO
================

`Wide_Text_IO' is similar in most respects to Text_IO, except that both
input and output files may contain special sequences that represent
wide character values.  The encoding scheme for a given file may be
specified using a FORM parameter:

     WCEM=X

as part of the FORM string (WCEM = wide character encoding method),
where X is one of the following characters

`h'
     Hex ESC encoding

`u'
     Upper half encoding

`s'
     Shift-JIS encoding

`e'
     EUC Encoding

`8'
     UTF-8 encoding

`b'
     Brackets encoding

The encoding methods match those that can be used in a source program,
but there is no requirement that the encoding method used for the
source program be the same as the encoding method used for files, and
different files may use different encoding methods.

   The default encoding method for the standard files, and for opened
files for which no WCEM parameter is given in the FORM string matches
the wide character encoding specified for the main program (the default
being brackets encoding if no coding method was specified with -gnatW).

Hex Coding
     In this encoding, a wide character is represented by a five
     character sequence:

          ESC a b c d

     where A, B, C, D are the four hexadecimal characters (using upper
     case letters) of the wide character code.  For example, ESC A345
     is used to represent the wide character with code 16#A345#.  This
     scheme is compatible with use of the full `Wide_Character' set.

Upper Half Coding
     The wide character with encoding 16#abcd#, where the upper bit is
     on (i.e. a is in the range 8-F) is represented as two bytes 16#ab#
     and 16#cd#.  The second byte may never be a format control
     character, but is not required to be in the upper half.  This
     method can be also used for shift-JIS or EUC where the internal
     coding matches the external coding.

Shift JIS Coding
     A wide character is represented by a two character sequence 16#ab#
     and 16#cd#, with the restrictions described for upper half
     encoding as described above.  The internal character code is the
     corresponding JIS character according to the standard algorithm
     for Shift-JIS conversion.  Only characters defined in the JIS code
     set table can be used with this encoding method.

EUC Coding
     A wide character is represented by a two character sequence 16#ab#
     and 16#cd#, with both characters being in the upper half.  The
     internal character code is the corresponding JIS character
     according to the EUC encoding algorithm.  Only characters defined
     in the JIS code set table can be used with this encoding method.

UTF-8 Coding
     A wide character is represented using UCS Transformation Format 8
     (UTF-8) as defined in Annex R of ISO 10646-1/Am.2.  Depending on
     the character value, the representation is a one, two, or three
     byte sequence:

          16#0000#-16#007f#: 2#0xxxxxxx#
          16#0080#-16#07ff#: 2#110xxxxx# 2#10xxxxxx#
          16#0800#-16#ffff#: 2#1110xxxx# 2#10xxxxxx# 2#10xxxxxx#

     where the xxx bits correspond to the left-padded bits of the
     16-bit character value.  Note that all lower half ASCII characters
     are represented as ASCII bytes and all upper half characters and
     other wide characters are represented as sequences of upper-half
     (The full UTF-8 scheme allows for encoding 31-bit characters as
     6-byte sequences, but in this implementation, all UTF-8 sequences
     of four or more bytes length will raise a Constraint_Error, as
     will all invalid UTF-8 sequences.)

Brackets Coding
     In this encoding, a wide character is represented by the following
     eight character sequence:

          [ " a b c d " ]

     where `a', `b', `c', `d' are the four hexadecimal characters
     (using uppercase letters) of the wide character code.  For
     example, `["A345"]' is used to represent the wide character with
     code `16#A345#'.  This scheme is compatible with use of the full
     Wide_Character set.  On input, brackets coding can also be used
     for upper half characters, e.g. `["C1"]' for lower case a.
     However, on output, brackets notation is only used for wide
     characters with a code greater than `16#FF#'.


For the coding schemes other than Hex and Brackets encoding, not all
wide character values can be represented.  An attempt to output a
character that cannot be represented using the encoding scheme for the
file causes Constraint_Error to be raised.  An invalid wide character
sequence on input also causes Constraint_Error to be raised.

* Menu:

* Wide_Text_IO Stream Pointer Positioning::
* Wide_Text_IO Reading and Writing Non-Regular Files::


File: gnat_rm.info,  Node: Wide_Text_IO Stream Pointer Positioning,  Next: Wide_Text_IO Reading and Writing Non-Regular Files,  Up: Wide_Text_IO

8.6.1 Stream Pointer Positioning
--------------------------------

`Ada.Wide_Text_IO' is similar to `Ada.Text_IO' in its handling of
stream pointer positioning (*note Text_IO::).  There is one additional
case:

   If `Ada.Wide_Text_IO.Look_Ahead' reads a character outside the
normal lower ASCII set (i.e. a character in the range:

     Wide_Character'Val (16#0080#) .. Wide_Character'Val (16#FFFF#)

then although the logical position of the file pointer is unchanged by
the `Look_Ahead' call, the stream is physically positioned past the
wide character sequence.  Again this is to avoid the need for buffering
or backup, and all `Wide_Text_IO' routines check the internal
indication that this situation has occurred so that this is not visible
to a normal program using `Wide_Text_IO'.  However, this discrepancy
can be observed if the wide text file shares a stream with another file.


File: gnat_rm.info,  Node: Wide_Text_IO Reading and Writing Non-Regular Files,  Prev: Wide_Text_IO Stream Pointer Positioning,  Up: Wide_Text_IO

8.6.2 Reading and Writing Non-Regular Files
-------------------------------------------

As in the case of Text_IO, when a non-regular file is read, it is
assumed that the file contains no page marks (any form characters are
treated as data characters), and `End_Of_Page' always returns `False'.
Similarly, the end of file indication is not sticky, so it is possible
to read beyond an end of file.


File: gnat_rm.info,  Node: Wide_Wide_Text_IO,  Next: Stream_IO,  Prev: Wide_Text_IO,  Up: The Implementation of Standard I/O

8.7 Wide_Wide_Text_IO
=====================

`Wide_Wide_Text_IO' is similar in most respects to Text_IO, except that
both input and output files may contain special sequences that represent
wide wide character values.  The encoding scheme for a given file may be
specified using a FORM parameter:

     WCEM=X

as part of the FORM string (WCEM = wide character encoding method),
where X is one of the following characters

`h'
     Hex ESC encoding

`u'
     Upper half encoding

`s'
     Shift-JIS encoding

`e'
     EUC Encoding

`8'
     UTF-8 encoding

`b'
     Brackets encoding

The encoding methods match those that can be used in a source program,
but there is no requirement that the encoding method used for the
source program be the same as the encoding method used for files, and
different files may use different encoding methods.

   The default encoding method for the standard files, and for opened
files for which no WCEM parameter is given in the FORM string matches
the wide character encoding specified for the main program (the default
being brackets encoding if no coding method was specified with -gnatW).

UTF-8 Coding
     A wide character is represented using UCS Transformation Format 8
     (UTF-8) as defined in Annex R of ISO 10646-1/Am.2.  Depending on
     the character value, the representation is a one, two, three, or
     four byte sequence:

          16#000000#-16#00007f#: 2#0xxxxxxx#
          16#000080#-16#0007ff#: 2#110xxxxx# 2#10xxxxxx#
          16#000800#-16#00ffff#: 2#1110xxxx# 2#10xxxxxx# 2#10xxxxxx#
          16#010000#-16#10ffff#: 2#11110xxx# 2#10xxxxxx# 2#10xxxxxx# 2#10xxxxxx#

     where the xxx bits correspond to the left-padded bits of the
     21-bit character value.  Note that all lower half ASCII characters
     are represented as ASCII bytes and all upper half characters and
     other wide characters are represented as sequences of upper-half
     characters.

Brackets Coding
     In this encoding, a wide wide character is represented by the
     following eight character sequence if is in wide character range

          [ " a b c d " ]

     and by the following ten character sequence if not

          [ " a b c d e f " ]

     where `a', `b', `c', `d', `e', and `f' are the four or six
     hexadecimal characters (using uppercase letters) of the wide wide
     character code.  For example, `["01A345"]' is used to represent
     the wide wide character with code `16#01A345#'.

     This scheme is compatible with use of the full Wide_Wide_Character
     set.  On input, brackets coding can also be used for upper half
     characters, e.g. `["C1"]' for lower case a.  However, on output,
     brackets notation is only used for wide characters with a code
     greater than `16#FF#'.


If is also possible to use the other Wide_Character encoding methods,
such as Shift-JIS, but the other schemes cannot support the full range
of wide wide characters.  An attempt to output a character that cannot
be represented using the encoding scheme for the file causes
Constraint_Error to be raised.  An invalid wide character sequence on
input also causes Constraint_Error to be raised.

* Menu:

* Wide_Wide_Text_IO Stream Pointer Positioning::
* Wide_Wide_Text_IO Reading and Writing Non-Regular Files::


File: gnat_rm.info,  Node: Wide_Wide_Text_IO Stream Pointer Positioning,  Next: Wide_Wide_Text_IO Reading and Writing Non-Regular Files,  Up: Wide_Wide_Text_IO

8.7.1 Stream Pointer Positioning
--------------------------------

`Ada.Wide_Wide_Text_IO' is similar to `Ada.Text_IO' in its handling of
stream pointer positioning (*note Text_IO::).  There is one additional
case:

   If `Ada.Wide_Wide_Text_IO.Look_Ahead' reads a character outside the
normal lower ASCII set (i.e. a character in the range:

     Wide_Wide_Character'Val (16#0080#) .. Wide_Wide_Character'Val (16#10FFFF#)

then although the logical position of the file pointer is unchanged by
the `Look_Ahead' call, the stream is physically positioned past the
wide character sequence.  Again this is to avoid the need for buffering
or backup, and all `Wide_Wide_Text_IO' routines check the internal
indication that this situation has occurred so that this is not visible
to a normal program using `Wide_Wide_Text_IO'.  However, this
discrepancy can be observed if the wide text file shares a stream with
another file.


File: gnat_rm.info,  Node: Wide_Wide_Text_IO Reading and Writing Non-Regular Files,  Prev: Wide_Wide_Text_IO Stream Pointer Positioning,  Up: Wide_Wide_Text_IO

8.7.2 Reading and Writing Non-Regular Files
-------------------------------------------

As in the case of Text_IO, when a non-regular file is read, it is
assumed that the file contains no page marks (any form characters are
treated as data characters), and `End_Of_Page' always returns `False'.
Similarly, the end of file indication is not sticky, so it is possible
to read beyond an end of file.


File: gnat_rm.info,  Node: Stream_IO,  Next: Shared Files,  Prev: Wide_Wide_Text_IO,  Up: The Implementation of Standard I/O

8.8 Stream_IO
=============

A stream file is a sequence of bytes, where individual elements are
written to the file as described in the Ada 95 reference manual.  The
type `Stream_Element' is simply a byte.  There are two ways to read or
write a stream file.

   * The operations `Read' and `Write' directly read or write a
     sequence of stream elements with no control information.

   * The stream attributes applied to a stream file transfer data in the
     manner described for stream attributes.


File: gnat_rm.info,  Node: Shared Files,  Next: Open Modes,  Prev: Stream_IO,  Up: The Implementation of Standard I/O

8.9 Shared Files
================

Section A.14 of the Ada 95 Reference Manual allows implementations to
provide a wide variety of behavior if an attempt is made to access the
same external file with two or more internal files.

   To provide a full range of functionality, while at the same time
minimizing the problems of portability caused by this implementation
dependence, GNAT handles file sharing as follows:

   * In the absence of a `shared=XXX' form parameter, an attempt to
     open two or more files with the same full name is considered an
     error and is not supported.  The exception `Use_Error' will be
     raised.  Note that a file that is not explicitly closed by the
     program remains open until the program terminates.

   * If the form parameter `shared=no' appears in the form string, the
     file can be opened or created with its own separate stream
     identifier, regardless of whether other files sharing the same
     external file are opened.  The exact effect depends on how the C
     stream routines handle multiple accesses to the same external
     files using separate streams.

   * If the form parameter `shared=yes' appears in the form string for
     each of two or more files opened using the same full name, the same
     stream is shared between these files, and the semantics are as
     described in Ada 95 Reference Manual, Section A.14.

When a program that opens multiple files with the same name is ported
from another Ada compiler to GNAT, the effect will be that `Use_Error'
is raised.

   The documentation of the original compiler and the documentation of
the program should then be examined to determine if file sharing was
expected, and `shared=XXX' parameters added to `Open' and `Create'
calls as required.

   When a program is ported from GNAT to some other Ada compiler, no
special attention is required unless the `shared=XXX' form parameter is
used in the program.  In this case, you must examine the documentation
of the new compiler to see if it supports the required file sharing
semantics, and form strings modified appropriately.  Of course it may
be the case that the program cannot be ported if the target compiler
does not support the required functionality.  The best approach in
writing portable code is to avoid file sharing (and hence the use of
the `shared=XXX' parameter in the form string) completely.

   One common use of file sharing in Ada 83 is the use of
instantiations of Sequential_IO on the same file with different types,
to achieve heterogeneous input-output.  Although this approach will
work in GNAT if `shared=yes' is specified, it is preferable in Ada 95
to use Stream_IO for this purpose (using the stream attributes)


File: gnat_rm.info,  Node: Open Modes,  Next: Operations on C Streams,  Prev: Shared Files,  Up: The Implementation of Standard I/O

8.10 Open Modes
===============

`Open' and `Create' calls result in a call to `fopen' using the mode
shown in the following table:



                    `Open' and `Create' Call Modes
                                    OPEN            CREATE
     Append_File                    "r+"             "w+"
     In_File                        "r"              "w+"
     Out_File (Direct_IO)           "r+"             "w"
     Out_File (all other cases)     "w"              "w"
     Inout_File                     "r+"             "w+"

If text file translation is required, then either `b' or `t' is added
to the mode, depending on the setting of Text.  Text file translation
refers to the mapping of CR/LF sequences in an external file to LF
characters internally.  This mapping only occurs in DOS and DOS-like
systems, and is not relevant to other systems.

   A special case occurs with Stream_IO.  As shown in the above table,
the file is initially opened in `r' or `w' mode for the `In_File' and
`Out_File' cases.  If a `Set_Mode' operation subsequently requires
switching from reading to writing or vice-versa, then the file is
reopened in `r+' mode to permit the required operation.


File: gnat_rm.info,  Node: Operations on C Streams,  Next: Interfacing to C Streams,  Prev: Open Modes,  Up: The Implementation of Standard I/O

8.11 Operations on C Streams
============================

The package `Interfaces.C_Streams' provides an Ada program with direct
access to the C library functions for operations on C streams:

     package Interfaces.C_Streams is
       -- Note: the reason we do not use the types that are in
       -- Interfaces.C is that we want to avoid dragging in the
       -- code in this unit if possible.
       subtype chars is System.Address;
       -- Pointer to null-terminated array of characters
       subtype FILEs is System.Address;
       -- Corresponds to the C type FILE*
       subtype voids is System.Address;
       -- Corresponds to the C type void*
       subtype int is Integer;
       subtype long is Long_Integer;
       -- Note: the above types are subtypes deliberately, and it
       -- is part of this spec that the above correspondences are
       -- guaranteed.  This means that it is legitimate to, for
       -- example, use Integer instead of int.  We provide these
       -- synonyms for clarity, but in some cases it may be
       -- convenient to use the underlying types (for example to
       -- avoid an unnecessary dependency of a spec on the spec
       -- of this unit).
       type size_t is mod 2 ** Standard'Address_Size;
       NULL_Stream : constant FILEs;
       -- Value returned (NULL in C) to indicate an
       -- fdopen/fopen/tmpfile error
       ----------------------------------
       -- Constants Defined in stdio.h --
       ----------------------------------
       EOF : constant int;
       -- Used by a number of routines to indicate error or
       -- end of file
       IOFBF : constant int;
       IOLBF : constant int;
       IONBF : constant int;
       -- Used to indicate buffering mode for setvbuf call
       SEEK_CUR : constant int;
       SEEK_END : constant int;
       SEEK_SET : constant int;
       -- Used to indicate origin for fseek call
       function stdin return FILEs;
       function stdout return FILEs;
       function stderr return FILEs;
       -- Streams associated with standard files
       --------------------------
       -- Standard C functions --
       --------------------------
       -- The functions selected below are ones that are
       -- available in DOS, OS/2, UNIX and Xenix (but not
       -- necessarily in ANSI C).  These are very thin interfaces
       -- which copy exactly the C headers.  For more
       -- documentation on these functions, see the Microsoft C
       -- "Run-Time Library Reference" (Microsoft Press, 1990,
       -- ISBN 1-55615-225-6), which includes useful information
       -- on system compatibility.
       procedure clearerr (stream : FILEs);
       function fclose (stream : FILEs) return int;
       function fdopen (handle : int; mode : chars) return FILEs;
       function feof (stream : FILEs) return int;
       function ferror (stream : FILEs) return int;
       function fflush (stream : FILEs) return int;
       function fgetc (stream : FILEs) return int;
       function fgets (strng : chars; n : int; stream : FILEs)
           return chars;
       function fileno (stream : FILEs) return int;
       function fopen (filename : chars; Mode : chars)
           return FILEs;
       -- Note: to maintain target independence, use
       -- text_translation_required, a boolean variable defined in
       -- a-sysdep.c to deal with the target dependent text
       -- translation requirement.  If this variable is set,
       -- then  b/t should be appended to the standard mode
       -- argument to set the text translation mode off or on
       -- as required.
       function fputc (C : int; stream : FILEs) return int;
       function fputs (Strng : chars; Stream : FILEs) return int;
       function fread
          (buffer : voids;
           size : size_t;
           count : size_t;
           stream : FILEs)
           return size_t;
       function freopen
          (filename : chars;
           mode : chars;
           stream : FILEs)
           return FILEs;
       function fseek
          (stream : FILEs;
           offset : long;
           origin : int)
           return int;
       function ftell (stream : FILEs) return long;
       function fwrite
          (buffer : voids;
           size : size_t;
           count : size_t;
           stream : FILEs)
           return size_t;
       function isatty (handle : int) return int;
       procedure mktemp (template : chars);
       -- The return value (which is just a pointer to template)
       -- is discarded
       procedure rewind (stream : FILEs);
       function rmtmp return int;
       function setvbuf
          (stream : FILEs;
           buffer : chars;
           mode : int;
           size : size_t)
           return int;

       function tmpfile return FILEs;
       function ungetc (c : int; stream : FILEs) return int;
       function unlink (filename : chars) return int;
       ---------------------
       -- Extra functions --
       ---------------------
       -- These functions supply slightly thicker bindings than
       -- those above.  They are derived from functions in the
       -- C Run-Time Library, but may do a bit more work than
       -- just directly calling one of the Library functions.
       function is_regular_file (handle : int) return int;
       -- Tests if given handle is for a regular file (result 1)
       -- or for a non-regular file (pipe or device, result 0).
       ---------------------------------
       -- Control of Text/Binary Mode --
       ---------------------------------
       -- If text_translation_required is true, then the following
       -- functions may be used to dynamically switch a file from
       -- binary to text mode or vice versa.  These functions have
       -- no effect if text_translation_required is false (i.e.  in
       -- normal UNIX mode).  Use fileno to get a stream handle.
       procedure set_binary_mode (handle : int);
       procedure set_text_mode (handle : int);
       ----------------------------
       -- Full Path Name support --
       ----------------------------
       procedure full_name (nam : chars; buffer : chars);
       -- Given a NUL terminated string representing a file
       -- name, returns in buffer a NUL terminated string
       -- representing the full path name for the file name.
       -- On systems where it is relevant the   drive is also
       -- part of the full path name.  It is the responsibility
       -- of the caller to pass an actual parameter for buffer
       -- that is big enough for any full path name.  Use
       -- max_path_len given below as the size of buffer.
       max_path_len : integer;
       -- Maximum length of an allowable full path name on the
       -- system, including a terminating NUL character.
     end Interfaces.C_Streams;


File: gnat_rm.info,  Node: Interfacing to C Streams,  Prev: Operations on C Streams,  Up: The Implementation of Standard I/O

8.12 Interfacing to C Streams
=============================

The packages in this section permit interfacing Ada files to C Stream
operations.

      with Interfaces.C_Streams;
      package Ada.Sequential_IO.C_Streams is
         function C_Stream (F : File_Type)
            return Interfaces.C_Streams.FILEs;
         procedure Open
           (File : in out File_Type;
            Mode : in File_Mode;
            C_Stream : in Interfaces.C_Streams.FILEs;
            Form : in String := "");
      end Ada.Sequential_IO.C_Streams;

       with Interfaces.C_Streams;
       package Ada.Direct_IO.C_Streams is
          function C_Stream (F : File_Type)
             return Interfaces.C_Streams.FILEs;
          procedure Open
            (File : in out File_Type;
             Mode : in File_Mode;
             C_Stream : in Interfaces.C_Streams.FILEs;
             Form : in String := "");
       end Ada.Direct_IO.C_Streams;

       with Interfaces.C_Streams;
       package Ada.Text_IO.C_Streams is
          function C_Stream (F : File_Type)
             return Interfaces.C_Streams.FILEs;
          procedure Open
            (File : in out File_Type;
             Mode : in File_Mode;
             C_Stream : in Interfaces.C_Streams.FILEs;
             Form : in String := "");
       end Ada.Text_IO.C_Streams;

       with Interfaces.C_Streams;
       package Ada.Wide_Text_IO.C_Streams is
          function C_Stream (F : File_Type)
             return Interfaces.C_Streams.FILEs;
          procedure Open
            (File : in out File_Type;
             Mode : in File_Mode;
             C_Stream : in Interfaces.C_Streams.FILEs;
             Form : in String := "");
      end Ada.Wide_Text_IO.C_Streams;

       with Interfaces.C_Streams;
       package Ada.Wide_Wide_Text_IO.C_Streams is
          function C_Stream (F : File_Type)
             return Interfaces.C_Streams.FILEs;
          procedure Open
            (File : in out File_Type;
             Mode : in File_Mode;
             C_Stream : in Interfaces.C_Streams.FILEs;
             Form : in String := "");
      end Ada.Wide_Wide_Text_IO.C_Streams;

      with Interfaces.C_Streams;
      package Ada.Stream_IO.C_Streams is
         function C_Stream (F : File_Type)
            return Interfaces.C_Streams.FILEs;
         procedure Open
           (File : in out File_Type;
            Mode : in File_Mode;
            C_Stream : in Interfaces.C_Streams.FILEs;
            Form : in String := "");
      end Ada.Stream_IO.C_Streams;

In each of these six packages, the `C_Stream' function obtains the
`FILE' pointer from a currently opened Ada file.  It is then possible
to use the `Interfaces.C_Streams' package to operate on this stream, or
the stream can be passed to a C program which can operate on it
directly.  Of course the program is responsible for ensuring that only
appropriate sequences of operations are executed.

   One particular use of relevance to an Ada program is that the
`setvbuf' function can be used to control the buffering of the stream
used by an Ada file.  In the absence of such a call the standard
default buffering is used.

   The `Open' procedures in these packages open a file giving an
existing C Stream instead of a file name.  Typically this stream is
imported from a C program, allowing an Ada file to operate on an
existing C file.


File: gnat_rm.info,  Node: The GNAT Library,  Next: Interfacing to Other Languages,  Prev: The Implementation of Standard I/O,  Up: Top

9 The GNAT Library
******************

The GNAT library contains a number of general and special purpose
packages.  It represents functionality that the GNAT developers have
found useful, and which is made available to GNAT users.  The packages
described here are fully supported, and upwards compatibility will be
maintained in future releases, so you can use these facilities with the
confidence that the same functionality will be available in future
releases.

   The chapter here simply gives a brief summary of the facilities
available.  The full documentation is found in the spec file for the
package.  The full sources of these library packages, including both
spec and body, are provided with all GNAT releases.  For example, to
find out the full specifications of the SPITBOL pattern matching
capability, including a full tutorial and extensive examples, look in
the `g-spipat.ads' file in the library.

   For each entry here, the package name (as it would appear in a `with'
clause) is given, followed by the name of the corresponding spec file in
parentheses.  The packages are children in four hierarchies, `Ada',
`Interfaces', `System', and `GNAT', the latter being a GNAT-specific
hierarchy.

   Note that an application program should only use packages in one of
these four hierarchies if the package is defined in the Ada Reference
Manual, or is listed in this section of the GNAT Programmers Reference
Manual.  All other units should be considered internal implementation
units and should not be directly `with''ed by application code.  The
use of a `with' statement that references one of these internal
implementation units makes an application potentially dependent on
changes in versions of GNAT, and will generate a warning message.

* Menu:

* Ada.Characters.Latin_9 (a-chlat9.ads)::
* Ada.Characters.Wide_Latin_1 (a-cwila1.ads)::
* Ada.Characters.Wide_Latin_9 (a-cwila9.ads)::
* Ada.Characters.Wide_Wide_Latin_1 (a-czila1.ads)::
* Ada.Characters.Wide_Wide_Latin_9 (a-czila9.ads)::
* Ada.Command_Line.Remove (a-colire.ads)::
* Ada.Command_Line.Environment (a-colien.ads)::
* Ada.Direct_IO.C_Streams (a-diocst.ads)::
* Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads)::
* Ada.Exceptions.Traceback (a-exctra.ads)::
* Ada.Sequential_IO.C_Streams (a-siocst.ads)::
* Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads)::
* Ada.Strings.Unbounded.Text_IO (a-suteio.ads)::
* Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads)::
* Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads)::
* Ada.Text_IO.C_Streams (a-tiocst.ads)::
* Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads)::
* Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads)::
* GNAT.Array_Split (g-arrspl.ads)::
* GNAT.AWK (g-awk.ads)::
* GNAT.Bounded_Buffers (g-boubuf.ads)::
* GNAT.Bounded_Mailboxes (g-boumai.ads)::
* GNAT.Bubble_Sort (g-bubsor.ads)::
* GNAT.Bubble_Sort_A (g-busora.ads)::
* GNAT.Bubble_Sort_G (g-busorg.ads)::
* GNAT.Calendar (g-calend.ads)::
* GNAT.Calendar.Time_IO (g-catiio.ads)::
* GNAT.CRC32 (g-crc32.ads)::
* GNAT.Case_Util (g-casuti.ads)::
* GNAT.CGI (g-cgi.ads)::
* GNAT.CGI.Cookie (g-cgicoo.ads)::
* GNAT.CGI.Debug (g-cgideb.ads)::
* GNAT.Command_Line (g-comlin.ads)::
* GNAT.Compiler_Version (g-comver.ads)::
* GNAT.Ctrl_C (g-ctrl_c.ads)::
* GNAT.Current_Exception (g-curexc.ads)::
* GNAT.Debug_Pools (g-debpoo.ads)::
* GNAT.Debug_Utilities (g-debuti.ads)::
* GNAT.Directory_Operations (g-dirope.ads)::
* GNAT.Dynamic_HTables (g-dynhta.ads)::
* GNAT.Dynamic_Tables (g-dyntab.ads)::
* GNAT.Exception_Actions (g-excact.ads)::
* GNAT.Exception_Traces (g-exctra.ads)::
* GNAT.Exceptions (g-except.ads)::
* GNAT.Expect (g-expect.ads)::
* GNAT.Float_Control (g-flocon.ads)::
* GNAT.Heap_Sort (g-heasor.ads)::
* GNAT.Heap_Sort_A (g-hesora.ads)::
* GNAT.Heap_Sort_G (g-hesorg.ads)::
* GNAT.HTable (g-htable.ads)::
* GNAT.IO (g-io.ads)::
* GNAT.IO_Aux (g-io_aux.ads)::
* GNAT.Lock_Files (g-locfil.ads)::
* GNAT.MD5 (g-md5.ads)::
* GNAT.Memory_Dump (g-memdum.ads)::
* GNAT.Most_Recent_Exception (g-moreex.ads)::
* GNAT.OS_Lib (g-os_lib.ads)::
* GNAT.Perfect_Hash_Generators (g-pehage.ads)::
* GNAT.Regexp (g-regexp.ads)::
* GNAT.Registry (g-regist.ads)::
* GNAT.Regpat (g-regpat.ads)::
* GNAT.Secondary_Stack_Info (g-sestin.ads)::
* GNAT.Semaphores (g-semaph.ads)::
* GNAT.Signals (g-signal.ads)::
* GNAT.Sockets (g-socket.ads)::
* GNAT.Source_Info (g-souinf.ads)::
* GNAT.Spell_Checker (g-speche.ads)::
* GNAT.Spitbol.Patterns (g-spipat.ads)::
* GNAT.Spitbol (g-spitbo.ads)::
* GNAT.Spitbol.Table_Boolean (g-sptabo.ads)::
* GNAT.Spitbol.Table_Integer (g-sptain.ads)::
* GNAT.Spitbol.Table_VString (g-sptavs.ads)::
* GNAT.Strings (g-string.ads)::
* GNAT.String_Split (g-strspl.ads)::
* GNAT.UTF_32 (g-utf_32.ads)::
* GNAT.Table (g-table.ads)::
* GNAT.Task_Lock (g-tasloc.ads)::
* GNAT.Threads (g-thread.ads)::
* GNAT.Traceback (g-traceb.ads)::
* GNAT.Traceback.Symbolic (g-trasym.ads)::
* GNAT.Wide_String_Split (g-wistsp.ads)::
* GNAT.Wide_Wide_String_Split (g-zistsp.ads)::
* Interfaces.C.Extensions (i-cexten.ads)::
* Interfaces.C.Streams (i-cstrea.ads)::
* Interfaces.CPP (i-cpp.ads)::
* Interfaces.Os2lib (i-os2lib.ads)::
* Interfaces.Os2lib.Errors (i-os2err.ads)::
* Interfaces.Os2lib.Synchronization (i-os2syn.ads)::
* Interfaces.Os2lib.Threads (i-os2thr.ads)::
* Interfaces.Packed_Decimal (i-pacdec.ads)::
* Interfaces.VxWorks (i-vxwork.ads)::
* Interfaces.VxWorks.IO (i-vxwoio.ads)::
* System.Address_Image (s-addima.ads)::
* System.Assertions (s-assert.ads)::
* System.Memory (s-memory.ads)::
* System.Partition_Interface (s-parint.ads)::
* System.Restrictions (s-restri.ads)::
* System.Rident (s-rident.ads)::
* System.Task_Info (s-tasinf.ads)::
* System.Wch_Cnv (s-wchcnv.ads)::
* System.Wch_Con (s-wchcon.ads)::


File: gnat_rm.info,  Node: Ada.Characters.Latin_9 (a-chlat9.ads),  Next: Ada.Characters.Wide_Latin_1 (a-cwila1.ads),  Up: The GNAT Library

9.1 `Ada.Characters.Latin_9' (`a-chlat9.ads')
=============================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the RM-defined package
`Ada.Characters.Latin_1' but with the few modifications required for
`Latin-9' The provision of such a package is specifically authorized by
the Ada Reference Manual (RM A.3(27)).


File: gnat_rm.info,  Node: Ada.Characters.Wide_Latin_1 (a-cwila1.ads),  Next: Ada.Characters.Wide_Latin_9 (a-cwila9.ads),  Prev: Ada.Characters.Latin_9 (a-chlat9.ads),  Up: The GNAT Library

9.2 `Ada.Characters.Wide_Latin_1' (`a-cwila1.ads')
==================================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the RM-defined package
`Ada.Characters.Latin_1' but with the types of the constants being
`Wide_Character' instead of `Character'.  The provision of such a
package is specifically authorized by the Ada Reference Manual (RM
A.3(27)).


File: gnat_rm.info,  Node: Ada.Characters.Wide_Latin_9 (a-cwila9.ads),  Next: Ada.Characters.Wide_Wide_Latin_1 (a-czila1.ads),  Prev: Ada.Characters.Wide_Latin_1 (a-cwila1.ads),  Up: The GNAT Library

9.3 `Ada.Characters.Wide_Latin_9' (`a-cwila1.ads')
==================================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the GNAT defined package
`Ada.Characters.Latin_9' but with the types of the constants being
`Wide_Character' instead of `Character'.  The provision of such a
package is specifically authorized by the Ada Reference Manual (RM
A.3(27)).


File: gnat_rm.info,  Node: Ada.Characters.Wide_Wide_Latin_1 (a-czila1.ads),  Next: Ada.Characters.Wide_Wide_Latin_9 (a-czila9.ads),  Prev: Ada.Characters.Wide_Latin_9 (a-cwila9.ads),  Up: The GNAT Library

9.4 `Ada.Characters.Wide_Wide_Latin_1' (`a-czila1.ads')
=======================================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the RM-defined package
`Ada.Characters.Latin_1' but with the types of the constants being
`Wide_Wide_Character' instead of `Character'.  The provision of such a
package is specifically authorized by the Ada Reference Manual (RM
A.3(27)).


File: gnat_rm.info,  Node: Ada.Characters.Wide_Wide_Latin_9 (a-czila9.ads),  Next: Ada.Command_Line.Remove (a-colire.ads),  Prev: Ada.Characters.Wide_Wide_Latin_1 (a-czila1.ads),  Up: The GNAT Library

9.5 `Ada.Characters.Wide_Wide_Latin_9' (`a-czila9.ads')
=======================================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the GNAT defined package
`Ada.Characters.Latin_9' but with the types of the constants being
`Wide_Wide_Character' instead of `Character'.  The provision of such a
package is specifically authorized by the Ada Reference Manual (RM
A.3(27)).


File: gnat_rm.info,  Node: Ada.Command_Line.Remove (a-colire.ads),  Next: Ada.Command_Line.Environment (a-colien.ads),  Prev: Ada.Characters.Wide_Wide_Latin_9 (a-czila9.ads),  Up: The GNAT Library

9.6 `Ada.Command_Line.Remove' (`a-colire.ads')
==============================================

This child of `Ada.Command_Line' provides a mechanism for logically
removing arguments from the argument list.  Once removed, an argument
is not visible to further calls on the subprograms in
`Ada.Command_Line' will not see the removed argument.


File: gnat_rm.info,  Node: Ada.Command_Line.Environment (a-colien.ads),  Next: Ada.Direct_IO.C_Streams (a-diocst.ads),  Prev: Ada.Command_Line.Remove (a-colire.ads),  Up: The GNAT Library

9.7 `Ada.Command_Line.Environment' (`a-colien.ads')
===================================================

This child of `Ada.Command_Line' provides a mechanism for obtaining
environment values on systems where this concept makes sense.


File: gnat_rm.info,  Node: Ada.Direct_IO.C_Streams (a-diocst.ads),  Next: Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads),  Prev: Ada.Command_Line.Environment (a-colien.ads),  Up: The GNAT Library

9.8 `Ada.Direct_IO.C_Streams' (`a-diocst.ads')
==============================================

This package provides subprograms that allow interfacing between C
streams and `Direct_IO'.  The stream identifier can be extracted from a
file opened on the Ada side, and an Ada file can be constructed from a
stream opened on the C side.


File: gnat_rm.info,  Node: Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads),  Next: Ada.Exceptions.Traceback (a-exctra.ads),  Prev: Ada.Direct_IO.C_Streams (a-diocst.ads),  Up: The GNAT Library

9.9 `Ada.Exceptions.Is_Null_Occurrence' (`a-einuoc.ads')
========================================================

This child subprogram provides a way of testing for the null exception
occurrence (`Null_Occurrence') without raising an exception.


File: gnat_rm.info,  Node: Ada.Exceptions.Traceback (a-exctra.ads),  Next: Ada.Sequential_IO.C_Streams (a-siocst.ads),  Prev: Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads),  Up: The GNAT Library

9.10 `Ada.Exceptions.Traceback' (`a-exctra.ads')
================================================

This child package provides the subprogram (`Tracebacks') to give a
traceback array of addresses based on an exception occurrence.


File: gnat_rm.info,  Node: Ada.Sequential_IO.C_Streams (a-siocst.ads),  Next: Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads),  Prev: Ada.Exceptions.Traceback (a-exctra.ads),  Up: The GNAT Library

9.11 `Ada.Sequential_IO.C_Streams' (`a-siocst.ads')
===================================================

This package provides subprograms that allow interfacing between C
streams and `Sequential_IO'.  The stream identifier can be extracted
from a file opened on the Ada side, and an Ada file can be constructed
from a stream opened on the C side.


File: gnat_rm.info,  Node: Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads),  Next: Ada.Strings.Unbounded.Text_IO (a-suteio.ads),  Prev: Ada.Sequential_IO.C_Streams (a-siocst.ads),  Up: The GNAT Library

9.12 `Ada.Streams.Stream_IO.C_Streams' (`a-ssicst.ads')
=======================================================

This package provides subprograms that allow interfacing between C
streams and `Stream_IO'.  The stream identifier can be extracted from a
file opened on the Ada side, and an Ada file can be constructed from a
stream opened on the C side.


File: gnat_rm.info,  Node: Ada.Strings.Unbounded.Text_IO (a-suteio.ads),  Next: Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads),  Prev: Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads),  Up: The GNAT Library

9.13 `Ada.Strings.Unbounded.Text_IO' (`a-suteio.ads')
=====================================================

This package provides subprograms for Text_IO for unbounded strings,
avoiding the necessity for an intermediate operation with ordinary
strings.


File: gnat_rm.info,  Node: Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads),  Next: Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads),  Prev: Ada.Strings.Unbounded.Text_IO (a-suteio.ads),  Up: The GNAT Library

9.14 `Ada.Strings.Wide_Unbounded.Wide_Text_IO' (`a-swuwti.ads')
===============================================================

This package provides subprograms for Text_IO for unbounded wide
strings, avoiding the necessity for an intermediate operation with
ordinary wide strings.


File: gnat_rm.info,  Node: Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads),  Next: Ada.Text_IO.C_Streams (a-tiocst.ads),  Prev: Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads),  Up: The GNAT Library

9.15 `Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO' (`a-szuzti.ads')
=========================================================================

This package provides subprograms for Text_IO for unbounded wide wide
strings, avoiding the necessity for an intermediate operation with
ordinary wide wide strings.


File: gnat_rm.info,  Node: Ada.Text_IO.C_Streams (a-tiocst.ads),  Next: Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads),  Prev: Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads),  Up: The GNAT Library

9.16 `Ada.Text_IO.C_Streams' (`a-tiocst.ads')
=============================================

This package provides subprograms that allow interfacing between C
streams and `Text_IO'.  The stream identifier can be extracted from a
file opened on the Ada side, and an Ada file can be constructed from a
stream opened on the C side.


File: gnat_rm.info,  Node: Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads),  Next: Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads),  Prev: Ada.Text_IO.C_Streams (a-tiocst.ads),  Up: The GNAT Library

9.17 `Ada.Wide_Text_IO.C_Streams' (`a-wtcstr.ads')
==================================================

This package provides subprograms that allow interfacing between C
streams and `Wide_Text_IO'.  The stream identifier can be extracted
from a file opened on the Ada side, and an Ada file can be constructed
from a stream opened on the C side.


File: gnat_rm.info,  Node: Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads),  Next: GNAT.Array_Split (g-arrspl.ads),  Prev: Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads),  Up: The GNAT Library

9.18 `Ada.Wide_Wide_Text_IO.C_Streams' (`a-ztcstr.ads')
=======================================================

This package provides subprograms that allow interfacing between C
streams and `Wide_Wide_Text_IO'.  The stream identifier can be
extracted from a file opened on the Ada side, and an Ada file can be
constructed from a stream opened on the C side.


File: gnat_rm.info,  Node: GNAT.Array_Split (g-arrspl.ads),  Next: GNAT.AWK (g-awk.ads),  Prev: Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads),  Up: The GNAT Library

9.19 `GNAT.Array_Split' (`g-arrspl.ads')
========================================

Useful array-manipulation routines: given a set of separators, split an
array wherever the separators appear, and provide direct access to the
resulting slices.


File: gnat_rm.info,  Node: GNAT.AWK (g-awk.ads),  Next: GNAT.Bounded_Buffers (g-boubuf.ads),  Prev: GNAT.Array_Split (g-arrspl.ads),  Up: The GNAT Library

9.20 `GNAT.AWK' (`g-awk.ads')
=============================

Provides AWK-like parsing functions, with an easy interface for parsing
one or more files containing formatted data.  The file is viewed as a
database where each record is a line and a field is a data element in
this line.


File: gnat_rm.info,  Node: GNAT.Bounded_Buffers (g-boubuf.ads),  Next: GNAT.Bounded_Mailboxes (g-boumai.ads),  Prev: GNAT.AWK (g-awk.ads),  Up: The GNAT Library

9.21 `GNAT.Bounded_Buffers' (`g-boubuf.ads')
============================================

Provides a concurrent generic bounded buffer abstraction.  Instances are
useful directly or as parts of the implementations of other
abstractions, such as mailboxes.


File: gnat_rm.info,  Node: GNAT.Bounded_Mailboxes (g-boumai.ads),  Next: GNAT.Bubble_Sort (g-bubsor.ads),  Prev: GNAT.Bounded_Buffers (g-boubuf.ads),  Up: The GNAT Library

9.22 `GNAT.Bounded_Mailboxes' (`g-boumai.ads')
==============================================

Provides a thread-safe asynchronous intertask mailbox communication
facility.


File: gnat_rm.info,  Node: GNAT.Bubble_Sort (g-bubsor.ads),  Next: GNAT.Bubble_Sort_A (g-busora.ads),  Prev: GNAT.Bounded_Mailboxes (g-boumai.ads),  Up: The GNAT Library

9.23 `GNAT.Bubble_Sort' (`g-bubsor.ads')
========================================

Provides a general implementation of bubble sort usable for sorting
arbitrary data items.  Exchange and comparison procedures are provided
by passing access-to-procedure values.


File: gnat_rm.info,  Node: GNAT.Bubble_Sort_A (g-busora.ads),  Next: GNAT.Bubble_Sort_G (g-busorg.ads),  Prev: GNAT.Bubble_Sort (g-bubsor.ads),  Up: The GNAT Library

9.24 `GNAT.Bubble_Sort_A' (`g-busora.ads')
==========================================

Provides a general implementation of bubble sort usable for sorting
arbitrary data items.  Move and comparison procedures are provided by
passing access-to-procedure values. This is an older version, retained
for compatibility. Usually `GNAT.Bubble_Sort' will be preferable.


File: gnat_rm.info,  Node: GNAT.Bubble_Sort_G (g-busorg.ads),  Next: GNAT.Calendar (g-calend.ads),  Prev: GNAT.Bubble_Sort_A (g-busora.ads),  Up: The GNAT Library

9.25 `GNAT.Bubble_Sort_G' (`g-busorg.ads')
==========================================

Similar to `Bubble_Sort_A' except that the move and sorting procedures
are provided as generic parameters, this improves efficiency, especially
if the procedures can be inlined, at the expense of duplicating code for
multiple instantiations.


File: gnat_rm.info,  Node: GNAT.Calendar (g-calend.ads),  Next: GNAT.Calendar.Time_IO (g-catiio.ads),  Prev: GNAT.Bubble_Sort_G (g-busorg.ads),  Up: The GNAT Library

9.26 `GNAT.Calendar' (`g-calend.ads')
=====================================

Extends the facilities provided by `Ada.Calendar' to include handling
of days of the week, an extended `Split' and `Time_Of' capability.
Also provides conversion of `Ada.Calendar.Time' values to and from the
C `timeval' format.


File: gnat_rm.info,  Node: GNAT.Calendar.Time_IO (g-catiio.ads),  Next: GNAT.CRC32 (g-crc32.ads),  Prev: GNAT.Calendar (g-calend.ads),  Up: The GNAT Library

9.27 `GNAT.Calendar.Time_IO' (`g-catiio.ads')
=============================================


File: gnat_rm.info,  Node: GNAT.CRC32 (g-crc32.ads),  Next: GNAT.Case_Util (g-casuti.ads),  Prev: GNAT.Calendar.Time_IO (g-catiio.ads),  Up: The GNAT Library

9.28 `GNAT.CRC32' (`g-crc32.ads')
=================================

This package implements the CRC-32 algorithm.  For a full description
of this algorithm see "Computation of Cyclic Redundancy Checks via
Table Look-Up", `Communications of the ACM', Vol. 31 No. 8, pp.
1008-1013, Aug. 1988.  Sarwate, D.V.

Provides an extended capability for formatted output of time values with
full user control over the format.  Modeled on the GNU Date
specification.


File: gnat_rm.info,  Node: GNAT.Case_Util (g-casuti.ads),  Next: GNAT.CGI (g-cgi.ads),  Prev: GNAT.CRC32 (g-crc32.ads),  Up: The GNAT Library

9.29 `GNAT.Case_Util' (`g-casuti.ads')
======================================

A set of simple routines for handling upper and lower casing of strings
without the overhead of the full casing tables in
`Ada.Characters.Handling'.


File: gnat_rm.info,  Node: GNAT.CGI (g-cgi.ads),  Next: GNAT.CGI.Cookie (g-cgicoo.ads),  Prev: GNAT.Case_Util (g-casuti.ads),  Up: The GNAT Library

9.30 `GNAT.CGI' (`g-cgi.ads')
=============================

This is a package for interfacing a GNAT program with a Web server via
the Common Gateway Interface (CGI).  Basically this package parses the
CGI parameters, which are a set of key/value pairs sent by the Web
server.  It builds a table whose index is the key and provides some
services to deal with this table.


File: gnat_rm.info,  Node: GNAT.CGI.Cookie (g-cgicoo.ads),  Next: GNAT.CGI.Debug (g-cgideb.ads),  Prev: GNAT.CGI (g-cgi.ads),  Up: The GNAT Library

9.31 `GNAT.CGI.Cookie' (`g-cgicoo.ads')
=======================================

This is a package to interface a GNAT program with a Web server via the
Common Gateway Interface (CGI).  It exports services to deal with Web
cookies (piece of information kept in the Web client software).


File: gnat_rm.info,  Node: GNAT.CGI.Debug (g-cgideb.ads),  Next: GNAT.Command_Line (g-comlin.ads),  Prev: GNAT.CGI.Cookie (g-cgicoo.ads),  Up: The GNAT Library

9.32 `GNAT.CGI.Debug' (`g-cgideb.ads')
======================================

This is a package to help debugging CGI (Common Gateway Interface)
programs written in Ada.


File: gnat_rm.info,  Node: GNAT.Command_Line (g-comlin.ads),  Next: GNAT.Compiler_Version (g-comver.ads),  Prev: GNAT.CGI.Debug (g-cgideb.ads),  Up: The GNAT Library

9.33 `GNAT.Command_Line' (`g-comlin.ads')
=========================================

Provides a high level interface to `Ada.Command_Line' facilities,
including the ability to scan for named switches with optional
parameters and expand file names using wild card notations.


File: gnat_rm.info,  Node: GNAT.Compiler_Version (g-comver.ads),  Next: GNAT.Ctrl_C (g-ctrl_c.ads),  Prev: GNAT.Command_Line (g-comlin.ads),  Up: The GNAT Library

9.34 `GNAT.Compiler_Version' (`g-comver.ads')
=============================================

Provides a routine for obtaining the version of the compiler used to
compile the program. More accurately this is the version of the binder
used to bind the program (this will normally be the same as the version
of the compiler if a consistent tool set is used to compile all units
of a partition).


File: gnat_rm.info,  Node: GNAT.Ctrl_C (g-ctrl_c.ads),  Next: GNAT.Current_Exception (g-curexc.ads),  Prev: GNAT.Compiler_Version (g-comver.ads),  Up: The GNAT Library

9.35 `GNAT.Ctrl_C' (`g-ctrl_c.ads')
===================================

Provides a simple interface to handle Ctrl-C keyboard events.


File: gnat_rm.info,  Node: GNAT.Current_Exception (g-curexc.ads),  Next: GNAT.Debug_Pools (g-debpoo.ads),  Prev: GNAT.Ctrl_C (g-ctrl_c.ads),  Up: The GNAT Library

9.36 `GNAT.Current_Exception' (`g-curexc.ads')
==============================================

Provides access to information on the current exception that has been
raised without the need for using the Ada-95 exception choice parameter
specification syntax.  This is particularly useful in simulating
typical facilities for obtaining information about exceptions provided
by Ada 83 compilers.


File: gnat_rm.info,  Node: GNAT.Debug_Pools (g-debpoo.ads),  Next: GNAT.Debug_Utilities (g-debuti.ads),  Prev: GNAT.Current_Exception (g-curexc.ads),  Up: The GNAT Library

9.37 `GNAT.Debug_Pools' (`g-debpoo.ads')
========================================

Provide a debugging storage pools that helps tracking memory corruption
problems.  See section "Finding memory problems with GNAT Debug Pool" in
the `GNAT User's Guide'.


File: gnat_rm.info,  Node: GNAT.Debug_Utilities (g-debuti.ads),  Next: GNAT.Directory_Operations (g-dirope.ads),  Prev: GNAT.Debug_Pools (g-debpoo.ads),  Up: The GNAT Library

9.38 `GNAT.Debug_Utilities' (`g-debuti.ads')
============================================

Provides a few useful utilities for debugging purposes, including
conversion to and from string images of address values. Supports both C
and Ada formats for hexadecimal literals.


File: gnat_rm.info,  Node: GNAT.Directory_Operations (g-dirope.ads),  Next: GNAT.Dynamic_HTables (g-dynhta.ads),  Prev: GNAT.Debug_Utilities (g-debuti.ads),  Up: The GNAT Library

9.39 `GNAT.Directory_Operations' (g-dirope.ads)
===============================================

Provides a set of routines for manipulating directories, including
changing the current directory, making new directories, and scanning
the files in a directory.


File: gnat_rm.info,  Node: GNAT.Dynamic_HTables (g-dynhta.ads),  Next: GNAT.Dynamic_Tables (g-dyntab.ads),  Prev: GNAT.Directory_Operations (g-dirope.ads),  Up: The GNAT Library

9.40 `GNAT.Dynamic_HTables' (`g-dynhta.ads')
============================================

A generic implementation of hash tables that can be used to hash
arbitrary data.  Provided in two forms, a simple form with built in
hash functions, and a more complex form in which the hash function is
supplied.

This package provides a facility similar to that of `GNAT.HTable',
except that this package declares a type that can be used to define
dynamic instances of the hash table, while an instantiation of
`GNAT.HTable' creates a single instance of the hash table.


File: gnat_rm.info,  Node: GNAT.Dynamic_Tables (g-dyntab.ads),  Next: GNAT.Exception_Actions (g-excact.ads),  Prev: GNAT.Dynamic_HTables (g-dynhta.ads),  Up: The GNAT Library

9.41 `GNAT.Dynamic_Tables' (`g-dyntab.ads')
===========================================

A generic package providing a single dimension array abstraction where
the length of the array can be dynamically modified.

This package provides a facility similar to that of `GNAT.Table',
except that this package declares a type that can be used to define
dynamic instances of the table, while an instantiation of `GNAT.Table'
creates a single instance of the table type.


File: gnat_rm.info,  Node: GNAT.Exception_Actions (g-excact.ads),  Next: GNAT.Exception_Traces (g-exctra.ads),  Prev: GNAT.Dynamic_Tables (g-dyntab.ads),  Up: The GNAT Library

9.42 `GNAT.Exception_Actions' (`g-excact.ads')
==============================================

Provides callbacks when an exception is raised. Callbacks can be
registered for specific exceptions, or when any exception is raised.
This can be used for instance to force a core dump to ease debugging.


File: gnat_rm.info,  Node: GNAT.Exception_Traces (g-exctra.ads),  Next: GNAT.Exceptions (g-except.ads),  Prev: GNAT.Exception_Actions (g-excact.ads),  Up: The GNAT Library

9.43 `GNAT.Exception_Traces' (`g-exctra.ads')
=============================================

Provides an interface allowing to control automatic output upon
exception occurrences.


File: gnat_rm.info,  Node: GNAT.Exceptions (g-except.ads),  Next: GNAT.Expect (g-expect.ads),  Prev: GNAT.Exception_Traces (g-exctra.ads),  Up: The GNAT Library

9.44 `GNAT.Exceptions' (`g-expect.ads')
=======================================

Normally it is not possible to raise an exception with a message from a
subprogram in a pure package, since the necessary types and subprograms
are in `Ada.Exceptions' which is not a pure unit. `GNAT.Exceptions'
provides a facility for getting around this limitation for a few
predefined exceptions, and for example allow raising `Constraint_Error'
with a message from a pure subprogram.


File: gnat_rm.info,  Node: GNAT.Expect (g-expect.ads),  Next: GNAT.Float_Control (g-flocon.ads),  Prev: GNAT.Exceptions (g-except.ads),  Up: The GNAT Library

9.45 `GNAT.Expect' (`g-expect.ads')
===================================

Provides a set of subprograms similar to what is available with the
standard Tcl Expect tool.  It allows you to easily spawn and
communicate with an external process.  You can send commands or inputs
to the process, and compare the output with some expected regular
expression. Currently `GNAT.Expect' is implemented on all native GNAT
ports except for OpenVMS.  It is not implemented for cross ports, and
in particular is not implemented for VxWorks or LynxOS.


File: gnat_rm.info,  Node: GNAT.Float_Control (g-flocon.ads),  Next: GNAT.Heap_Sort (g-heasor.ads),  Prev: GNAT.Expect (g-expect.ads),  Up: The GNAT Library

9.46 `GNAT.Float_Control' (`g-flocon.ads')
==========================================

Provides an interface for resetting the floating-point processor into
the mode required for correct semantic operation in Ada.  Some third
party library calls may cause this mode to be modified, and the Reset
procedure in this package can be used to reestablish the required mode.


File: gnat_rm.info,  Node: GNAT.Heap_Sort (g-heasor.ads),  Next: GNAT.Heap_Sort_A (g-hesora.ads),  Prev: GNAT.Float_Control (g-flocon.ads),  Up: The GNAT Library

9.47 `GNAT.Heap_Sort' (`g-heasor.ads')
======================================

Provides a general implementation of heap sort usable for sorting
arbitrary data items. Exchange and comparison procedures are provided
by passing access-to-procedure values.  The algorithm used is a
modified heap sort that performs approximately N*log(N) comparisons in
the worst case.


File: gnat_rm.info,  Node: GNAT.Heap_Sort_A (g-hesora.ads),  Next: GNAT.Heap_Sort_G (g-hesorg.ads),  Prev: GNAT.Heap_Sort (g-heasor.ads),  Up: The GNAT Library

9.48 `GNAT.Heap_Sort_A' (`g-hesora.ads')
========================================

Provides a general implementation of heap sort usable for sorting
arbitrary data items. Move and comparison procedures are provided by
passing access-to-procedure values.  The algorithm used is a modified
heap sort that performs approximately N*log(N) comparisons in the worst
case.  This differs from `GNAT.Heap_Sort' in having a less convenient
interface, but may be slightly more efficient.


File: gnat_rm.info,  Node: GNAT.Heap_Sort_G (g-hesorg.ads),  Next: GNAT.HTable (g-htable.ads),  Prev: GNAT.Heap_Sort_A (g-hesora.ads),  Up: The GNAT Library

9.49 `GNAT.Heap_Sort_G' (`g-hesorg.ads')
========================================

Similar to `Heap_Sort_A' except that the move and sorting procedures
are provided as generic parameters, this improves efficiency, especially
if the procedures can be inlined, at the expense of duplicating code for
multiple instantiations.


File: gnat_rm.info,  Node: GNAT.HTable (g-htable.ads),  Next: GNAT.IO (g-io.ads),  Prev: GNAT.Heap_Sort_G (g-hesorg.ads),  Up: The GNAT Library

9.50 `GNAT.HTable' (`g-htable.ads')
===================================

A generic implementation of hash tables that can be used to hash
arbitrary data.  Provides two approaches, one a simple static approach,
and the other allowing arbitrary dynamic hash tables.


File: gnat_rm.info,  Node: GNAT.IO (g-io.ads),  Next: GNAT.IO_Aux (g-io_aux.ads),  Prev: GNAT.HTable (g-htable.ads),  Up: The GNAT Library

9.51 `GNAT.IO' (`g-io.ads')
===========================

A simple preelaborable input-output package that provides a subset of
simple Text_IO functions for reading characters and strings from
Standard_Input, and writing characters, strings and integers to either
Standard_Output or Standard_Error.


File: gnat_rm.info,  Node: GNAT.IO_Aux (g-io_aux.ads),  Next: GNAT.Lock_Files (g-locfil.ads),  Prev: GNAT.IO (g-io.ads),  Up: The GNAT Library

9.52 `GNAT.IO_Aux' (`g-io_aux.ads')
===================================

Provides some auxiliary functions for use with Text_IO, including a test
for whether a file exists, and functions for reading a line of text.


File: gnat_rm.info,  Node: GNAT.Lock_Files (g-locfil.ads),  Next: GNAT.MD5 (g-md5.ads),  Prev: GNAT.IO_Aux (g-io_aux.ads),  Up: The GNAT Library

9.53 `GNAT.Lock_Files' (`g-locfil.ads')
=======================================

Provides a general interface for using files as locks.  Can be used for
providing program level synchronization.


File: gnat_rm.info,  Node: GNAT.MD5 (g-md5.ads),  Next: GNAT.Memory_Dump (g-memdum.ads),  Prev: GNAT.Lock_Files (g-locfil.ads),  Up: The GNAT Library

9.54 `GNAT.MD5' (`g-md5.ads')
=============================

Implements the MD5 Message-Digest Algorithm as described in RFC 1321.


File: gnat_rm.info,  Node: GNAT.Memory_Dump (g-memdum.ads),  Next: GNAT.Most_Recent_Exception (g-moreex.ads),  Prev: GNAT.MD5 (g-md5.ads),  Up: The GNAT Library

9.55 `GNAT.Memory_Dump' (`g-memdum.ads')
========================================

Provides a convenient routine for dumping raw memory to either the
standard output or standard error files. Uses GNAT.IO for actual output.


File: gnat_rm.info,  Node: GNAT.Most_Recent_Exception (g-moreex.ads),  Next: GNAT.OS_Lib (g-os_lib.ads),  Prev: GNAT.Memory_Dump (g-memdum.ads),  Up: The GNAT Library

9.56 `GNAT.Most_Recent_Exception' (`g-moreex.ads')
==================================================

Provides access to the most recently raised exception.  Can be used for
various logging purposes, including duplicating functionality of some
Ada 83 implementation dependent extensions.


File: gnat_rm.info,  Node: GNAT.OS_Lib (g-os_lib.ads),  Next: GNAT.Perfect_Hash_Generators (g-pehage.ads),  Prev: GNAT.Most_Recent_Exception (g-moreex.ads),  Up: The GNAT Library

9.57 `GNAT.OS_Lib' (`g-os_lib.ads')
===================================

Provides a range of target independent operating system interface
functions, including time/date management, file operations, subprocess
management, including a portable spawn procedure, and access to
environment variables and error return codes.


File: gnat_rm.info,  Node: GNAT.Perfect_Hash_Generators (g-pehage.ads),  Next: GNAT.Regexp (g-regexp.ads),  Prev: GNAT.OS_Lib (g-os_lib.ads),  Up: The GNAT Library

9.58 `GNAT.Perfect_Hash_Generators' (`g-pehage.ads')
====================================================

Provides a generator of static minimal perfect hash functions. No
collisions occur and each item can be retrieved from the table in one
probe (perfect property). The hash table size corresponds to the exact
size of the key set and no larger (minimal property). The key set has to
be know in advance (static property). The hash functions are also order
preserving. If w2 is inserted after w1 in the generator, their hashcode
are in the same order. These hashing functions are very convenient for
use with realtime applications.


File: gnat_rm.info,  Node: GNAT.Regexp (g-regexp.ads),  Next: GNAT.Registry (g-regist.ads),  Prev: GNAT.Perfect_Hash_Generators (g-pehage.ads),  Up: The GNAT Library

9.59 `GNAT.Regexp' (`g-regexp.ads')
===================================

A simple implementation of regular expressions, using a subset of
regular expression syntax copied from familiar Unix style utilities.
This is the simples of the three pattern matching packages provided,
and is particularly suitable for "file globbing" applications.


File: gnat_rm.info,  Node: GNAT.Registry (g-regist.ads),  Next: GNAT.Regpat (g-regpat.ads),  Prev: GNAT.Regexp (g-regexp.ads),  Up: The GNAT Library

9.60 `GNAT.Registry' (`g-regist.ads')
=====================================

This is a high level binding to the Windows registry.  It is possible to
do simple things like reading a key value, creating a new key.  For full
registry API, but at a lower level of abstraction, refer to the
Win32.Winreg package provided with the Win32Ada binding


File: gnat_rm.info,  Node: GNAT.Regpat (g-regpat.ads),  Next: GNAT.Secondary_Stack_Info (g-sestin.ads),  Prev: GNAT.Registry (g-regist.ads),  Up: The GNAT Library

9.61 `GNAT.Regpat' (`g-regpat.ads')
===================================

A complete implementation of Unix-style regular expression matching,
copied from the original V7 style regular expression library written in
C by Henry Spencer (and binary compatible with this C library).


File: gnat_rm.info,  Node: GNAT.Secondary_Stack_Info (g-sestin.ads),  Next: GNAT.Semaphores (g-semaph.ads),  Prev: GNAT.Regpat (g-regpat.ads),  Up: The GNAT Library

9.62 `GNAT.Secondary_Stack_Info' (`g-sestin.ads')
=================================================

Provide the capability to query the high water mark of the current
task's secondary stack.


File: gnat_rm.info,  Node: GNAT.Semaphores (g-semaph.ads),  Next: GNAT.Signals (g-signal.ads),  Prev: GNAT.Secondary_Stack_Info (g-sestin.ads),  Up: The GNAT Library

9.63 `GNAT.Semaphores' (`g-semaph.ads')
=======================================

Provides classic counting and binary semaphores using protected types.


File: gnat_rm.info,  Node: GNAT.Signals (g-signal.ads),  Next: GNAT.Sockets (g-socket.ads),  Prev: GNAT.Semaphores (g-semaph.ads),  Up: The GNAT Library

9.64 `GNAT.Signals' (`g-signal.ads')
====================================

Provides the ability to manipulate the blocked status of signals on
supported targets.


File: gnat_rm.info,  Node: GNAT.Sockets (g-socket.ads),  Next: GNAT.Source_Info (g-souinf.ads),  Prev: GNAT.Signals (g-signal.ads),  Up: The GNAT Library

9.65 `GNAT.Sockets' (`g-socket.ads')
====================================

A high level and portable interface to develop sockets based
applications.  This package is based on the sockets thin binding found
in `GNAT.Sockets.Thin'. Currently `GNAT.Sockets' is implemented on all
native GNAT ports except for OpenVMS.  It is not implemented for the
LynxOS cross port.


File: gnat_rm.info,  Node: GNAT.Source_Info (g-souinf.ads),  Next: GNAT.Spell_Checker (g-speche.ads),  Prev: GNAT.Sockets (g-socket.ads),  Up: The GNAT Library

9.66 `GNAT.Source_Info' (`g-souinf.ads')
========================================

Provides subprograms that give access to source code information known
at compile time, such as the current file name and line number.


File: gnat_rm.info,  Node: GNAT.Spell_Checker (g-speche.ads),  Next: GNAT.Spitbol.Patterns (g-spipat.ads),  Prev: GNAT.Source_Info (g-souinf.ads),  Up: The GNAT Library

9.67 `GNAT.Spell_Checker' (`g-speche.ads')
==========================================

Provides a function for determining whether one string is a plausible
near misspelling of another string.


File: gnat_rm.info,  Node: GNAT.Spitbol.Patterns (g-spipat.ads),  Next: GNAT.Spitbol (g-spitbo.ads),  Prev: GNAT.Spell_Checker (g-speche.ads),  Up: The GNAT Library

9.68 `GNAT.Spitbol.Patterns' (`g-spipat.ads')
=============================================

A complete implementation of SNOBOL4 style pattern matching.  This is
the most elaborate of the pattern matching packages provided.  It fully
duplicates the SNOBOL4 dynamic pattern construction and matching
capabilities, using the efficient algorithm developed by Robert Dewar
for the SPITBOL system.


File: gnat_rm.info,  Node: GNAT.Spitbol (g-spitbo.ads),  Next: GNAT.Spitbol.Table_Boolean (g-sptabo.ads),  Prev: GNAT.Spitbol.Patterns (g-spipat.ads),  Up: The GNAT Library

9.69 `GNAT.Spitbol' (`g-spitbo.ads')
====================================

The top level package of the collection of SPITBOL-style functionality,
this package provides basic SNOBOL4 string manipulation functions, such
as Pad, Reverse, Trim, Substr capability, as well as a generic table
function useful for constructing arbitrary mappings from strings in the
style of the SNOBOL4 TABLE function.


File: gnat_rm.info,  Node: GNAT.Spitbol.Table_Boolean (g-sptabo.ads),  Next: GNAT.Spitbol.Table_Integer (g-sptain.ads),  Prev: GNAT.Spitbol (g-spitbo.ads),  Up: The GNAT Library

9.70 `GNAT.Spitbol.Table_Boolean' (`g-sptabo.ads')
==================================================

A library level of instantiation of `GNAT.Spitbol.Patterns.Table' for
type `Standard.Boolean', giving an implementation of sets of string
values.


File: gnat_rm.info,  Node: GNAT.Spitbol.Table_Integer (g-sptain.ads),  Next: GNAT.Spitbol.Table_VString (g-sptavs.ads),  Prev: GNAT.Spitbol.Table_Boolean (g-sptabo.ads),  Up: The GNAT Library

9.71 `GNAT.Spitbol.Table_Integer' (`g-sptain.ads')
==================================================

A library level of instantiation of `GNAT.Spitbol.Patterns.Table' for
type `Standard.Integer', giving an implementation of maps from string
to integer values.


File: gnat_rm.info,  Node: GNAT.Spitbol.Table_VString (g-sptavs.ads),  Next: GNAT.Strings (g-string.ads),  Prev: GNAT.Spitbol.Table_Integer (g-sptain.ads),  Up: The GNAT Library

9.72 `GNAT.Spitbol.Table_VString' (`g-sptavs.ads')
==================================================

A library level of instantiation of `GNAT.Spitbol.Patterns.Table' for a
variable length string type, giving an implementation of general maps
from strings to strings.


File: gnat_rm.info,  Node: GNAT.Strings (g-string.ads),  Next: GNAT.String_Split (g-strspl.ads),  Prev: GNAT.Spitbol.Table_VString (g-sptavs.ads),  Up: The GNAT Library

9.73 `GNAT.Strings' (`g-string.ads')
====================================

Common String access types and related subprograms. Basically it
defines a string access and an array of string access types.


File: gnat_rm.info,  Node: GNAT.String_Split (g-strspl.ads),  Next: GNAT.UTF_32 (g-utf_32.ads),  Prev: GNAT.Strings (g-string.ads),  Up: The GNAT Library

9.74 `GNAT.String_Split' (`g-strspl.ads')
=========================================

Useful string manipulation routines: given a set of separators, split a
string wherever the separators appear, and provide direct access to the
resulting slices. This package is instantiated from `GNAT.Array_Split'.


File: gnat_rm.info,  Node: GNAT.UTF_32 (g-utf_32.ads),  Next: GNAT.Table (g-table.ads),  Prev: GNAT.String_Split (g-strspl.ads),  Up: The GNAT Library

9.75 `GNAT.UTF_32' (`g-table.ads')
==================================

This is a package intended to be used in conjunction with the
`Wide_Character' type in Ada 95 and the `Wide_Wide_Character' type in
Ada 2005 (available in `GNAT' in Ada 2005 mode). This package contains
Unicode categorization routines, as well as lexical categorization
routines corresponding to the Ada 2005 lexical rules for identifiers
and strings, and also a lower case to upper case fold routine
corresponding to the Ada 2005 rules for identifier equivalence.


File: gnat_rm.info,  Node: GNAT.Table (g-table.ads),  Next: GNAT.Task_Lock (g-tasloc.ads),  Prev: GNAT.UTF_32 (g-utf_32.ads),  Up: The GNAT Library

9.76 `GNAT.Table' (`g-table.ads')
=================================

A generic package providing a single dimension array abstraction where
the length of the array can be dynamically modified.

This package provides a facility similar to that of
`GNAT.Dynamic_Tables', except that this package declares a single
instance of the table type, while an instantiation of
`GNAT.Dynamic_Tables' creates a type that can be used to define dynamic
instances of the table.


File: gnat_rm.info,  Node: GNAT.Task_Lock (g-tasloc.ads),  Next: GNAT.Threads (g-thread.ads),  Prev: GNAT.Table (g-table.ads),  Up: The GNAT Library

9.77 `GNAT.Task_Lock' (`g-tasloc.ads')
======================================

A very simple facility for locking and unlocking sections of code using
a single global task lock.  Appropriate for use in situations where
contention between tasks is very rarely expected.


File: gnat_rm.info,  Node: GNAT.Threads (g-thread.ads),  Next: GNAT.Traceback (g-traceb.ads),  Prev: GNAT.Task_Lock (g-tasloc.ads),  Up: The GNAT Library

9.78 `GNAT.Threads' (`g-thread.ads')
====================================

Provides facilities for creating and destroying threads with explicit
calls.  These threads are known to the GNAT run-time system.  These
subprograms are exported C-convention procedures intended to be called
from foreign code.  By using these primitives rather than directly
calling operating systems routines, compatibility with the Ada tasking
run-time is provided.


File: gnat_rm.info,  Node: GNAT.Traceback (g-traceb.ads),  Next: GNAT.Traceback.Symbolic (g-trasym.ads),  Prev: GNAT.Threads (g-thread.ads),  Up: The GNAT Library

9.79 `GNAT.Traceback' (`g-traceb.ads')
======================================

Provides a facility for obtaining non-symbolic traceback information,
useful in various debugging situations.


File: gnat_rm.info,  Node: GNAT.Traceback.Symbolic (g-trasym.ads),  Next: GNAT.Wide_String_Split (g-wistsp.ads),  Prev: GNAT.Traceback (g-traceb.ads),  Up: The GNAT Library

9.80 `GNAT.Traceback.Symbolic' (`g-trasym.ads')
===============================================

Provides symbolic traceback information that includes the subprogram
name and line number information.


File: gnat_rm.info,  Node: GNAT.Wide_String_Split (g-wistsp.ads),  Next: GNAT.Wide_Wide_String_Split (g-zistsp.ads),  Prev: GNAT.Traceback.Symbolic (g-trasym.ads),  Up: The GNAT Library

9.81 `GNAT.Wide_String_Split' (`g-wistsp.ads')
==============================================

Useful wide string manipulation routines: given a set of separators,
split a wide string wherever the separators appear, and provide direct
access to the resulting slices. This package is instantiated from
`GNAT.Array_Split'.


File: gnat_rm.info,  Node: GNAT.Wide_Wide_String_Split (g-zistsp.ads),  Next: Interfaces.C.Extensions (i-cexten.ads),  Prev: GNAT.Wide_String_Split (g-wistsp.ads),  Up: The GNAT Library

9.82 `GNAT.Wide_Wide_String_Split' (`g-zistsp.ads')
===================================================

Useful wide wide string manipulation routines: given a set of
separators, split a wide wide string wherever the separators appear,
and provide direct access to the resulting slices. This package is
instantiated from `GNAT.Array_Split'.


File: gnat_rm.info,  Node: Interfaces.C.Extensions (i-cexten.ads),  Next: Interfaces.C.Streams (i-cstrea.ads),  Prev: GNAT.Wide_Wide_String_Split (g-zistsp.ads),  Up: The GNAT Library

9.83 `Interfaces.C.Extensions' (`i-cexten.ads')
===============================================

This package contains additional C-related definitions, intended for
use with either manually or automatically generated bindings to C
libraries.


File: gnat_rm.info,  Node: Interfaces.C.Streams (i-cstrea.ads),  Next: Interfaces.CPP (i-cpp.ads),  Prev: Interfaces.C.Extensions (i-cexten.ads),  Up: The GNAT Library

9.84 `Interfaces.C.Streams' (`i-cstrea.ads')
============================================

This package is a binding for the most commonly used operations on C
streams.


File: gnat_rm.info,  Node: Interfaces.CPP (i-cpp.ads),  Next: Interfaces.Os2lib (i-os2lib.ads),  Prev: Interfaces.C.Streams (i-cstrea.ads),  Up: The GNAT Library

9.85 `Interfaces.CPP' (`i-cpp.ads')
===================================

This package provides facilities for use in interfacing to C++.  It is
primarily intended to be used in connection with automated tools for
the generation of C++ interfaces.


File: gnat_rm.info,  Node: Interfaces.Os2lib (i-os2lib.ads),  Next: Interfaces.Os2lib.Errors (i-os2err.ads),  Prev: Interfaces.CPP (i-cpp.ads),  Up: The GNAT Library

9.86 `Interfaces.Os2lib' (`i-os2lib.ads')
=========================================

This package provides interface definitions to the OS/2 library.  It is
a thin binding which is a direct translation of the various `<bse.h>'
files.


File: gnat_rm.info,  Node: Interfaces.Os2lib.Errors (i-os2err.ads),  Next: Interfaces.Os2lib.Synchronization (i-os2syn.ads),  Prev: Interfaces.Os2lib (i-os2lib.ads),  Up: The GNAT Library

9.87 `Interfaces.Os2lib.Errors' (`i-os2err.ads')
================================================

This package provides definitions of the OS/2 error codes.


File: gnat_rm.info,  Node: Interfaces.Os2lib.Synchronization (i-os2syn.ads),  Next: Interfaces.Os2lib.Threads (i-os2thr.ads),  Prev: Interfaces.Os2lib.Errors (i-os2err.ads),  Up: The GNAT Library

9.88 `Interfaces.Os2lib.Synchronization' (`i-os2syn.ads')
=========================================================

This is a child package that provides definitions for interfacing to
the `OS/2' synchronization primitives.


File: gnat_rm.info,  Node: Interfaces.Os2lib.Threads (i-os2thr.ads),  Next: Interfaces.Packed_Decimal (i-pacdec.ads),  Prev: Interfaces.Os2lib.Synchronization (i-os2syn.ads),  Up: The GNAT Library

9.89 `Interfaces.Os2lib.Threads' (`i-os2thr.ads')
=================================================

This is a child package that provides definitions for interfacing to
the `OS/2' thread primitives.


File: gnat_rm.info,  Node: Interfaces.Packed_Decimal (i-pacdec.ads),  Next: Interfaces.VxWorks (i-vxwork.ads),  Prev: Interfaces.Os2lib.Threads (i-os2thr.ads),  Up: The GNAT Library

9.90 `Interfaces.Packed_Decimal' (`i-pacdec.ads')
=================================================

This package provides a set of routines for conversions to and from a
packed decimal format compatible with that used on IBM mainframes.


File: gnat_rm.info,  Node: Interfaces.VxWorks (i-vxwork.ads),  Next: Interfaces.VxWorks.IO (i-vxwoio.ads),  Prev: Interfaces.Packed_Decimal (i-pacdec.ads),  Up: The GNAT Library

9.91 `Interfaces.VxWorks' (`i-vxwork.ads')
==========================================

This package provides a limited binding to the VxWorks API.  In
particular, it interfaces with the VxWorks hardware interrupt
facilities.


File: gnat_rm.info,  Node: Interfaces.VxWorks.IO (i-vxwoio.ads),  Next: System.Address_Image (s-addima.ads),  Prev: Interfaces.VxWorks (i-vxwork.ads),  Up: The GNAT Library

9.92 `Interfaces.VxWorks.IO' (`i-vxwoio.ads')
=============================================

This package provides a binding to the ioctl (IO/Control) function of
VxWorks, defining a set of option values and function codes. A
particular use of this package is to enable the use of Get_Immediate
under VxWorks.


File: gnat_rm.info,  Node: System.Address_Image (s-addima.ads),  Next: System.Assertions (s-assert.ads),  Prev: Interfaces.VxWorks.IO (i-vxwoio.ads),  Up: The GNAT Library

9.93 `System.Address_Image' (`s-addima.ads')
============================================

This function provides a useful debugging function that gives an
(implementation dependent) string which identifies an address.


File: gnat_rm.info,  Node: System.Assertions (s-assert.ads),  Next: System.Memory (s-memory.ads),  Prev: System.Address_Image (s-addima.ads),  Up: The GNAT Library

9.94 `System.Assertions' (`s-assert.ads')
=========================================

This package provides the declaration of the exception raised by an
run-time assertion failure, as well as the routine that is used
internally to raise this assertion.


File: gnat_rm.info,  Node: System.Memory (s-memory.ads),  Next: System.Partition_Interface (s-parint.ads),  Prev: System.Assertions (s-assert.ads),  Up: The GNAT Library

9.95 `System.Memory' (`s-memory.ads')
=====================================

This package provides the interface to the low level routines used by
the generated code for allocation and freeing storage for the default
storage pool (analogous to the C routines malloc and free.  It also
provides a reallocation interface analogous to the C routine realloc.
The body of this unit may be modified to provide alternative allocation
mechanisms for the default pool, and in addition, direct calls to this
unit may be made for low level allocation uses (for example see the
body of `GNAT.Tables').


File: gnat_rm.info,  Node: System.Partition_Interface (s-parint.ads),  Next: System.Restrictions (s-restri.ads),  Prev: System.Memory (s-memory.ads),  Up: The GNAT Library

9.96 `System.Partition_Interface' (`s-parint.ads')
==================================================

This package provides facilities for partition interfacing.  It is used
primarily in a distribution context when using Annex E with `GLADE'.


File: gnat_rm.info,  Node: System.Restrictions (s-restri.ads),  Next: System.Rident (s-rident.ads),  Prev: System.Partition_Interface (s-parint.ads),  Up: The GNAT Library

9.97 `System.Restrictions' (`s-restri.ads')
===========================================

This package provides facilities for accessing at run-time the status
of restrictions specified at compile time for the partition.
Information is available both with regard to actual restrictions
specified, and with regard to compiler determined information on which
restrictions are violated by one or more packages in the partition.


File: gnat_rm.info,  Node: System.Rident (s-rident.ads),  Next: System.Task_Info (s-tasinf.ads),  Prev: System.Restrictions (s-restri.ads),  Up: The GNAT Library

9.98 `System.Rident' (`s-rident.ads')
=====================================

This package provides definitions of the restrictions identifiers
supported by GNAT, and also the format of the restrictions provided in
package System.Restrictions.  It is not normally necessary to `with'
this generic package since the necessary instantiation is included in
package System.Restrictions.


File: gnat_rm.info,  Node: System.Task_Info (s-tasinf.ads),  Next: System.Wch_Cnv (s-wchcnv.ads),  Prev: System.Rident (s-rident.ads),  Up: The GNAT Library

9.99 `System.Task_Info' (`s-tasinf.ads')
========================================

This package provides target dependent functionality that is used to
support the `Task_Info' pragma


File: gnat_rm.info,  Node: System.Wch_Cnv (s-wchcnv.ads),  Next: System.Wch_Con (s-wchcon.ads),  Prev: System.Task_Info (s-tasinf.ads),  Up: The GNAT Library

9.100 `System.Wch_Cnv' (`s-wchcnv.ads')
=======================================

This package provides routines for converting between wide and wide
wide characters and a representation as a value of type
`Standard.String', using a specified wide character encoding method.
It uses definitions in package `System.Wch_Con'.


File: gnat_rm.info,  Node: System.Wch_Con (s-wchcon.ads),  Prev: System.Wch_Cnv (s-wchcnv.ads),  Up: The GNAT Library

9.101 `System.Wch_Con' (`s-wchcon.ads')
=======================================

This package provides definitions and descriptions of the various
methods used for encoding wide characters in ordinary strings.  These
definitions are used by the package `System.Wch_Cnv'.


File: gnat_rm.info,  Node: Interfacing to Other Languages,  Next: Specialized Needs Annexes,  Prev: The GNAT Library,  Up: Top

10 Interfacing to Other Languages
*********************************

The facilities in annex B of the Ada 95 Reference Manual are fully
implemented in GNAT, and in addition, a full interface to C++ is
provided.

* Menu:

* Interfacing to C::
* Interfacing to C++::
* Interfacing to COBOL::
* Interfacing to Fortran::
* Interfacing to non-GNAT Ada code::


File: gnat_rm.info,  Node: Interfacing to C,  Next: Interfacing to C++,  Up: Interfacing to Other Languages

10.1 Interfacing to C
=====================

Interfacing to C with GNAT can use one of two approaches:

   * The types in the package `Interfaces.C' may be used.

   * Standard Ada types may be used directly.  This may be less
     portable to other compilers, but will work on all GNAT compilers,
     which guarantee correspondence between the C and Ada types.

Pragma `Convention C' may be applied to Ada types, but mostly has no
effect, since this is the default.  The following table shows the
correspondence between Ada scalar types and the corresponding C types.

`Integer'
     `int'

`Short_Integer'
     `short'

`Short_Short_Integer'
     `signed char'

`Long_Integer'
     `long'

`Long_Long_Integer'
     `long long'

`Short_Float'
     `float'

`Float'
     `float'

`Long_Float'
     `double'

`Long_Long_Float'
     This is the longest floating-point type supported by the hardware.

Additionally, there are the following general correspondences between
Ada and C types:
   * Ada enumeration types map to C enumeration types directly if pragma
     `Convention C' is specified, which causes them to have int length.
     Without pragma `Convention C', Ada enumeration types map to 8,
     16, or 32 bits (i.e. C types `signed char', `short', `int',
     respectively) depending on the number of values passed.  This is
     the only case in which pragma `Convention C' affects the
     representation of an Ada type.

   * Ada access types map to C pointers, except for the case of
     pointers to unconstrained types in Ada, which have no direct C
     equivalent.

   * Ada arrays map directly to C arrays.

   * Ada records map directly to C structures.

   * Packed Ada records map to C structures where all members are bit
     fields of the length corresponding to the `TYPE'Size' value in Ada.


File: gnat_rm.info,  Node: Interfacing to C++,  Next: Interfacing to COBOL,  Prev: Interfacing to C,  Up: Interfacing to Other Languages

10.2 Interfacing to C++
=======================

The interface to C++ makes use of the following pragmas, which are
primarily intended to be constructed automatically using a binding
generator tool, although it is possible to construct them by hand.  No
suitable binding generator tool is supplied with GNAT though.

   Using these pragmas it is possible to achieve complete
inter-operability between Ada tagged types and C class definitions.
See *Note Implementation Defined Pragmas::, for more details.

`pragma CPP_Class ([Entity =>] LOCAL_NAME)'
     The argument denotes an entity in the current declarative region
     that is declared as a tagged or untagged record type.  It
     indicates that the type corresponds to an externally declared C++
     class type, and is to be laid out the same way that C++ would lay
     out the type.

`pragma CPP_Constructor ([Entity =>] LOCAL_NAME)'
     This pragma identifies an imported function (imported in the usual
     way with pragma `Import') as corresponding to a C++ constructor.

`pragma CPP_Vtable ...'
     One `CPP_Vtable' pragma can be present for each component of type
     `CPP.Interfaces.Vtable_Ptr' in a record to which pragma `CPP_Class'
     applies.


File: gnat_rm.info,  Node: Interfacing to COBOL,  Next: Interfacing to Fortran,  Prev: Interfacing to C++,  Up: Interfacing to Other Languages

10.3 Interfacing to COBOL
=========================

Interfacing to COBOL is achieved as described in section B.4 of the Ada
95 reference manual.


File: gnat_rm.info,  Node: Interfacing to Fortran,  Next: Interfacing to non-GNAT Ada code,  Prev: Interfacing to COBOL,  Up: Interfacing to Other Languages

10.4 Interfacing to Fortran
===========================

Interfacing to Fortran is achieved as described in section B.5 of the
reference manual.  The pragma `Convention Fortran', applied to a
multi-dimensional array causes the array to be stored in column-major
order as required for convenient interface to Fortran.


File: gnat_rm.info,  Node: Interfacing to non-GNAT Ada code,  Prev: Interfacing to Fortran,  Up: Interfacing to Other Languages

10.5 Interfacing to non-GNAT Ada code
=====================================

It is possible to specify the convention `Ada' in a pragma `Import' or
pragma `Export'.  However this refers to the calling conventions used
by GNAT, which may or may not be similar enough to those used by some
other Ada 83 or Ada 95 compiler to allow interoperation.

   If arguments types are kept simple, and if the foreign compiler
generally follows system calling conventions, then it may be possible
to integrate files compiled by other Ada compilers, provided that the
elaboration issues are adequately addressed (for example by eliminating
the need for any load time elaboration).

   In particular, GNAT running on VMS is designed to be highly
compatible with the DEC Ada 83 compiler, so this is one case in which
it is possible to import foreign units of this type, provided that the
data items passed are restricted to simple scalar values or simple
record types without variants, or simple array types with fixed bounds.


File: gnat_rm.info,  Node: Specialized Needs Annexes,  Next: Implementation of Specific Ada Features,  Prev: Interfacing to Other Languages,  Up: Top

11 Specialized Needs Annexes
****************************

Ada 95 defines a number of specialized needs annexes, which are not
required in all implementations.  However, as described in this chapter,
GNAT implements all of these special needs annexes:

Systems Programming (Annex C)
     The Systems Programming Annex is fully implemented.

Real-Time Systems (Annex D)
     The Real-Time Systems Annex is fully implemented.

Distributed Systems (Annex E)
     Stub generation is fully implemented in the GNAT compiler.  In
     addition, a complete compatible PCS is available as part of the
     GLADE system, a separate product.  When the two products are used
     in conjunction, this annex is fully implemented.

Information Systems (Annex F)
     The Information Systems annex is fully implemented.

Numerics (Annex G)
     The Numerics Annex is fully implemented.

Safety and Security (Annex H)
     The Safety and Security annex is fully implemented.


File: gnat_rm.info,  Node: Implementation of Specific Ada Features,  Next: Project File Reference,  Prev: Specialized Needs Annexes,  Up: Top

12 Implementation of Specific Ada Features
******************************************

This chapter describes the GNAT implementation of several Ada language
facilities.

* Menu:

* Machine Code Insertions::
* GNAT Implementation of Tasking::
* GNAT Implementation of Shared Passive Packages::
* Code Generation for Array Aggregates::
* The Size of Discriminated Records with Default Discriminants::
* Strict Conformance to the Ada 95 Reference Manual::


File: gnat_rm.info,  Node: Machine Code Insertions,  Next: GNAT Implementation of Tasking,  Up: Implementation of Specific Ada Features

12.1 Machine Code Insertions
============================

Package `Machine_Code' provides machine code support as described in
the Ada 95 Reference Manual in two separate forms:
   * Machine code statements, consisting of qualified expressions that
     fit the requirements of RM section 13.8.

   * An intrinsic callable procedure, providing an alternative
     mechanism of including machine instructions in a subprogram.

The two features are similar, and both are closely related to the
mechanism provided by the asm instruction in the GNU C compiler.  Full
understanding and use of the facilities in this package requires
understanding the asm instruction as described in `Using the GNU
Compiler Collection (GCC)' by Richard Stallman. The relevant section is
titled "Extensions to the C Language Family" -> "Assembler Instructions
with C Expression Operands".

   Calls to the function `Asm' and the procedure `Asm' have identical
semantic restrictions and effects as described below.  Both are
provided so that the procedure call can be used as a statement, and the
function call can be used to form a code_statement.

   The first example given in the GCC documentation is the C `asm'
instruction:
        asm ("fsinx %1 %0" : "=f" (result) : "f" (angle));

The equivalent can be written for GNAT as:

     Asm ("fsinx %1 %0",
          My_Float'Asm_Output ("=f", result),
          My_Float'Asm_Input  ("f",  angle));

The first argument to `Asm' is the assembler template, and is identical
to what is used in GNU C.  This string must be a static expression.
The second argument is the output operand list.  It is either a single
`Asm_Output' attribute reference, or a list of such references enclosed
in parentheses (technically an array aggregate of such references).

   The `Asm_Output' attribute denotes a function that takes two
parameters.  The first is a string, the second is the name of a variable
of the type designated by the attribute prefix.  The first (string)
argument is required to be a static expression and designates the
constraint for the parameter (e.g. what kind of register is required).
The second argument is the variable to be updated with the result.  The
possible values for constraint are the same as those used in the RTL,
and are dependent on the configuration file used to build the GCC back
end.  If there are no output operands, then this argument may either be
omitted, or explicitly given as `No_Output_Operands'.

   The second argument of `MY_FLOAT'Asm_Output' functions as though it
were an `out' parameter, which is a little curious, but all names have
the form of expressions, so there is no syntactic irregularity, even
though normally functions would not be permitted `out' parameters.  The
third argument is the list of input operands.  It is either a single
`Asm_Input' attribute reference, or a list of such references enclosed
in parentheses (technically an array aggregate of such references).

   The `Asm_Input' attribute denotes a function that takes two
parameters.  The first is a string, the second is an expression of the
type designated by the prefix.  The first (string) argument is required
to be a static expression, and is the constraint for the parameter,
(e.g. what kind of register is required).  The second argument is the
value to be used as the input argument.  The possible values for the
constant are the same as those used in the RTL, and are dependent on
the configuration file used to built the GCC back end.

   If there are no input operands, this argument may either be omitted,
or explicitly given as `No_Input_Operands'.  The fourth argument, not
present in the above example, is a list of register names, called the
"clobber" argument.  This argument, if given, must be a static string
expression, and is a space or comma separated list of names of registers
that must be considered destroyed as a result of the `Asm' call.  If
this argument is the null string (the default value), then the code
generator assumes that no additional registers are destroyed.

   The fifth argument, not present in the above example, called the
"volatile" argument, is by default `False'.  It can be set to the
literal value `True' to indicate to the code generator that all
optimizations with respect to the instruction specified should be
suppressed, and that in particular, for an instruction that has outputs,
the instruction will still be generated, even if none of the outputs are
used.  See the full description in the GCC manual for further details.

   The `Asm' subprograms may be used in two ways.  First the procedure
forms can be used anywhere a procedure call would be valid, and
correspond to what the RM calls "intrinsic" routines.  Such calls can
be used to intersperse machine instructions with other Ada statements.
Second, the function forms, which return a dummy value of the limited
private type `Asm_Insn', can be used in code statements, and indeed
this is the only context where such calls are allowed.  Code statements
appear as aggregates of the form:

     Asm_Insn'(Asm (...));
     Asm_Insn'(Asm_Volatile (...));

In accordance with RM rules, such code statements are allowed only
within subprograms whose entire body consists of such statements.  It is
not permissible to intermix such statements with other Ada statements.

   Typically the form using intrinsic procedure calls is more convenient
and more flexible.  The code statement form is provided to meet the RM
suggestion that such a facility should be made available.  The following
is the exact syntax of the call to `Asm'. As usual, if named notation
is used, the arguments may be given in arbitrary order, following the
normal rules for use of positional and named arguments)

     ASM_CALL ::= Asm (
                      [Template =>] static_string_EXPRESSION
                    [,[Outputs  =>] OUTPUT_OPERAND_LIST      ]
                    [,[Inputs   =>] INPUT_OPERAND_LIST       ]
                    [,[Clobber  =>] static_string_EXPRESSION ]
                    [,[Volatile =>] static_boolean_EXPRESSION] )

     OUTPUT_OPERAND_LIST ::=
       [PREFIX.]No_Output_Operands
     | OUTPUT_OPERAND_ATTRIBUTE
     | (OUTPUT_OPERAND_ATTRIBUTE {,OUTPUT_OPERAND_ATTRIBUTE})

     OUTPUT_OPERAND_ATTRIBUTE ::=
       SUBTYPE_MARK'Asm_Output (static_string_EXPRESSION, NAME)

     INPUT_OPERAND_LIST ::=
       [PREFIX.]No_Input_Operands
     | INPUT_OPERAND_ATTRIBUTE
     | (INPUT_OPERAND_ATTRIBUTE {,INPUT_OPERAND_ATTRIBUTE})

     INPUT_OPERAND_ATTRIBUTE ::=
       SUBTYPE_MARK'Asm_Input (static_string_EXPRESSION, EXPRESSION)

The identifiers `No_Input_Operands' and `No_Output_Operands' are
declared in the package `Machine_Code' and must be referenced according
to normal visibility rules. In particular if there is no `use' clause
for this package, then appropriate package name qualification is
required.


File: gnat_rm.info,  Node: GNAT Implementation of Tasking,  Next: GNAT Implementation of Shared Passive Packages,  Prev: Machine Code Insertions,  Up: Implementation of Specific Ada Features

12.2 GNAT Implementation of Tasking
===================================

This chapter outlines the basic GNAT approach to tasking (in particular,
a multi-layered library for portability) and discusses issues related
to compliance with the Real-Time Systems Annex.

* Menu:

* Mapping Ada Tasks onto the Underlying Kernel Threads::
* Ensuring Compliance with the Real-Time Annex::


File: gnat_rm.info,  Node: Mapping Ada Tasks onto the Underlying Kernel Threads,  Next: Ensuring Compliance with the Real-Time Annex,  Up: GNAT Implementation of Tasking

12.2.1 Mapping Ada Tasks onto the Underlying Kernel Threads
-----------------------------------------------------------

GNAT's run-time support comprises two layers:

   * GNARL (GNAT Run-time Layer)

   * GNULL (GNAT Low-level Library)

In GNAT, Ada's tasking services rely on a platform and OS independent
layer known as GNARL.  This code is responsible for implementing the
correct semantics of Ada's task creation, rendezvous, protected
operations etc.

   GNARL decomposes Ada's tasking semantics into simpler lower level
operations such as create a thread, set the priority of a thread,
yield, create a lock, lock/unlock, etc.  The spec for these low-level
operations constitutes GNULLI, the GNULL Interface.  This interface is
directly inspired from the POSIX real-time API.

   If the underlying executive or OS implements the POSIX standard
faithfully, the GNULL Interface maps as is to the services offered by
the underlying kernel.  Otherwise, some target dependent glue code maps
the services offered by the underlying kernel to the semantics expected
by GNARL.

   Whatever the underlying OS (VxWorks, UNIX, OS/2, Windows NT, etc.)
the key point is that each Ada task is mapped on a thread in the
underlying kernel.  For example, in the case of VxWorks, one Ada task =
one VxWorks task.

   In addition Ada task priorities map onto the underlying thread
priorities.  Mapping Ada tasks onto the underlying kernel threads has
several advantages:

   * The underlying scheduler is used to schedule the Ada tasks.  This
     makes Ada tasks as efficient as kernel threads from a scheduling
     standpoint.

   * Interaction with code written in C containing threads is eased
     since at the lowest level Ada tasks and C threads map onto the same
     underlying kernel concept.

   * When an Ada task is blocked during I/O the remaining Ada tasks are
     able to proceed.

   * On multiprocessor systems Ada tasks can execute in parallel.

Some threads libraries offer a mechanism to fork a new process, with the
child process duplicating the threads from the parent.  GNAT does not
support this functionality when the parent contains more than one task.  


File: gnat_rm.info,  Node: Ensuring Compliance with the Real-Time Annex,  Prev: Mapping Ada Tasks onto the Underlying Kernel Threads,  Up: GNAT Implementation of Tasking

12.2.2 Ensuring Compliance with the Real-Time Annex
---------------------------------------------------

Although mapping Ada tasks onto the underlying threads has significant
advantages, it does create some complications when it comes to
respecting the scheduling semantics specified in the real-time annex
(Annex D).

   For instance the Annex D requirement for the `FIFO_Within_Priorities'
scheduling policy states:

     _When the active priority of a ready task that is not running
     changes, or the setting of its base priority takes effect, the
     task is removed from the ready queue for its old active priority
     and is added at the tail of the ready queue for its new active
     priority, except in the case where the active priority is lowered
     due to the loss of inherited priority, in which case the task is
     added at the head of the ready queue for its new active priority._

While most kernels do put tasks at the end of the priority queue when a
task changes its priority, (which respects the main
FIFO_Within_Priorities requirement), almost none keep a thread at the
beginning of its priority queue when its priority drops from the loss
of inherited priority.

   As a result most vendors have provided incomplete Annex D
implementations.

   The GNAT run-time, has a nice cooperative solution to this problem
which ensures that accurate FIFO_Within_Priorities semantics are
respected.

   The principle is as follows.  When an Ada task T is about to start
running, it checks whether some other Ada task R with the same priority
as T has been suspended due to the loss of priority inheritance.  If
this is the case, T yields and is placed at the end of its priority
queue.  When R arrives at the front of the queue it executes.

   Note that this simple scheme preserves the relative order of the
tasks that were ready to execute in the priority queue where R has been
placed at the end.


File: gnat_rm.info,  Node: GNAT Implementation of Shared Passive Packages,  Next: Code Generation for Array Aggregates,  Prev: GNAT Implementation of Tasking,  Up: Implementation of Specific Ada Features

12.3 GNAT Implementation of Shared Passive Packages
===================================================

GNAT fully implements the pragma `Shared_Passive' for the purpose of
designating shared passive packages.  This allows the use of passive
partitions in the context described in the Ada Reference Manual; i.e.
for communication between separate partitions of a distributed
application using the features in Annex E.  

   However, the implementation approach used by GNAT provides for more
extensive usage as follows:

_Communication between separate programs_
     This allows separate programs to access the data in passive
     partitions, using protected objects for synchronization where
     needed. The only requirement is that the two programs have a
     common shared file system. It is even possible for programs
     running on different machines with different architectures (e.g.
     different endianness) to communicate via the data in a passive
     partition.

_Persistence between program runs_
     The data in a passive package can persist from one run of a
     program to another, so that a later program sees the final values
     stored by a previous run of the same program.


The implementation approach used is to store the data in files. A
separate stream file is created for each object in the package, and an
access to an object causes the corresponding file to be read or written.

   The environment variable `SHARED_MEMORY_DIRECTORY' should be set to
the directory to be used for these files.  The files in this directory
have names that correspond to their fully qualified names. For example,
if we have the package

     package X is
       pragma Shared_Passive (X);
       Y : Integer;
       Z : Float;
     end X;

and the environment variable is set to `/stemp/', then the files created
will have the names:

     /stemp/x.y
     /stemp/x.z

These files are created when a value is initially written to the
object, and the files are retained until manually deleted. This
provides the persistence semantics. If no file exists, it means that no
partition has assigned a value to the variable; in this case the
initial value declared in the package will be used. This model ensures
that there are no issues in synchronizing the elaboration process,
since elaboration of passive packages elaborates the initial values,
but does not create the files.

   The files are written using normal `Stream_IO' access.  If you want
to be able to communicate between programs or partitions running on
different architectures, then you should use the XDR versions of the
stream attribute routines, since these are architecture independent.

   If active synchronization is required for access to the variables in
the shared passive package, then as described in the Ada Reference
Manual, the package may contain protected objects used for this
purpose. In this case a lock file (whose name is `___lock' (three
underscores) is created in the shared memory directory.  This is used
to provide the required locking semantics for proper protected object
synchronization.

   As of January 2003, GNAT supports shared passive packages on all
platforms except for OpenVMS.


File: gnat_rm.info,  Node: Code Generation for Array Aggregates,  Next: The Size of Discriminated Records with Default Discriminants,  Prev: GNAT Implementation of Shared Passive Packages,  Up: Implementation of Specific Ada Features

12.4 Code Generation for Array Aggregates
=========================================

* Menu:

* Static constant aggregates with static bounds::
* Constant aggregates with an unconstrained nominal types::
* Aggregates with static bounds::
* Aggregates with non-static bounds::
* Aggregates in assignment statements::

Aggregate have a rich syntax and allow the user to specify the values of
complex data structures by means of a single construct.  As a result,
the code generated for aggregates can be quite complex and involve
loops, case statements and multiple assignments.  In the simplest
cases, however, the compiler will recognize aggregates whose components
and constraints are fully static, and in those cases the compiler will
generate little or no executable code.  The following is an outline of
the code that GNAT generates for various aggregate constructs.  For
further details, the user will find it useful to examine the output
produced by the -gnatG flag to see the expanded source that is input to
the code generator.  The user will also want to examine the assembly
code generated at various levels of optimization.

   The code generated for aggregates depends on the context, the
component values, and the type.  In the context of an object
declaration the code generated is generally simpler than in the case of
an assignment.  As a general rule, static component values and static
subtypes also lead to simpler code.


File: gnat_rm.info,  Node: Static constant aggregates with static bounds,  Next: Constant aggregates with an unconstrained nominal types,  Up: Code Generation for Array Aggregates

12.4.1 Static constant aggregates with static bounds
----------------------------------------------------

For the declarations:
         type One_Dim is array (1..10) of integer;
         ar0 : constant One_Dim := ( 1, 2, 3, 4, 5, 6, 7, 8, 9, 0);

GNAT generates no executable code: the constant ar0 is placed in static
memory.  The same is true for constant aggregates with named
associations:

         Cr1 : constant One_Dim := (4 => 16, 2 => 4, 3 => 9, 1=> 1);
         Cr3 : constant One_Dim := (others => 7777);

The same is true for multidimensional constant arrays such as:

         type two_dim is array (1..3, 1..3) of integer;
         Unit : constant two_dim := ( (1,0,0), (0,1,0), (0,0,1));

The same is true for arrays of one-dimensional arrays: the following are
static:

     type ar1b  is array (1..3) of boolean;
     type ar_ar is array (1..3) of ar1b;
     None  : constant ar1b := (others => false);     --  fully static
     None2 : constant ar_ar := (1..3 => None);       --  fully static

However, for multidimensional aggregates with named associations, GNAT
will generate assignments and loops, even if all associations are
static.  The following two declarations generate a loop for the first
dimension, and individual component assignments for the second
dimension:

     Zero1: constant two_dim := (1..3 => (1..3 => 0));
     Zero2: constant two_dim := (others => (others => 0));


File: gnat_rm.info,  Node: Constant aggregates with an unconstrained nominal types,  Next: Aggregates with static bounds,  Prev: Static constant aggregates with static bounds,  Up: Code Generation for Array Aggregates

12.4.2 Constant aggregates with an unconstrained nominal types
--------------------------------------------------------------

In such cases the aggregate itself establishes the subtype, so that
associations with `others' cannot be used.  GNAT determines the bounds
for the actual subtype of the aggregate, and allocates the aggregate
statically as well.  No code is generated for the following:

         type One_Unc is array (natural range <>) of integer;
         Cr_Unc : constant One_Unc := (12,24,36);


File: gnat_rm.info,  Node: Aggregates with static bounds,  Next: Aggregates with non-static bounds,  Prev: Constant aggregates with an unconstrained nominal types,  Up: Code Generation for Array Aggregates

12.4.3 Aggregates with static bounds
------------------------------------

In all previous examples the aggregate was the initial (and immutable)
value of a constant.  If the aggregate initializes a variable, then
code is generated for it as a combination of individual assignments and
loops over the target object.  The declarations

            Cr_Var1 : One_Dim := (2, 5, 7, 11);
            Cr_Var2 : One_Dim := (others > -1);

generate the equivalent of

            Cr_Var1 (1) := 2;
            Cr_Var1 (2) := 3;
            Cr_Var1 (3) := 5;
            Cr_Var1 (4) := 11;

            for I in Cr_Var2'range loop
               Cr_Var2 (I) := =-1;
            end loop;


File: gnat_rm.info,  Node: Aggregates with non-static bounds,  Next: Aggregates in assignment statements,  Prev: Aggregates with static bounds,  Up: Code Generation for Array Aggregates

12.4.4 Aggregates with non-static bounds
----------------------------------------

If the bounds of the aggregate are not statically compatible with the
bounds of the nominal subtype  of the target, then constraint checks
have to be generated on the bounds.  For a multidimensional array,
constraint checks may have to be applied to sub-arrays individually, if
they do not have statically compatible subtypes.


File: gnat_rm.info,  Node: Aggregates in assignment statements,  Prev: Aggregates with non-static bounds,  Up: Code Generation for Array Aggregates

12.4.5 Aggregates in assignment statements
------------------------------------------

In general, aggregate assignment requires the construction of a
temporary, and a copy from the temporary to the target of the
assignment.  This is because it is not always possible to convert the
assignment into a series of individual component assignments.  For
example, consider the simple case:

             A := (A(2), A(1));

This cannot be converted into:

             A(1) := A(2);
             A(2) := A(1);

So the aggregate has to be built first in a separate location, and then
copied into the target.  GNAT recognizes simple cases where this
intermediate step is not required, and the assignments can be performed
in place, directly into the target.  The following sufficient criteria
are applied:

   * The bounds of the aggregate are static, and the associations are
     static.

   * The components of the aggregate are static constants, names of
     simple variables that are not renamings, or expressions not
     involving indexed components whose operands obey these rules.

If any of these conditions are violated, the aggregate will be built in
a temporary (created either by the front-end or the code generator) and
then that temporary will be copied onto the target.


File: gnat_rm.info,  Node: The Size of Discriminated Records with Default Discriminants,  Next: Strict Conformance to the Ada 95 Reference Manual,  Prev: Code Generation for Array Aggregates,  Up: Implementation of Specific Ada Features

12.5 The Size of Discriminated Records with Default Discriminants
=================================================================

If a discriminated type `T' has discriminants with default values, it is
possible to declare an object of this type without providing an explicit
constraint:

     type Size is range 1..100;

     type Rec (D : Size := 15) is record
        Name : String (1..D);
     end T;

     Word : Rec;

Such an object is said to be _unconstrained_.  The discriminant of the
object can be modified by a full assignment to the object, as long as
it preserves the relation between the value of the discriminant, and
the value of the components that depend on it:

     Word := (3, "yes");

     Word := (5, "maybe");

     Word := (5, "no"); -- raises Constraint_Error

In order to support this behavior efficiently, an unconstrained object
is given the maximum size that any value of the type requires. In the
case above, `Word' has storage for the discriminant and for a `String'
of length 100.  It is important to note that unconstrained objects do
not require dynamic allocation. It would be an improper implementation
to place on the heap those components whose size depends on
discriminants. (This improper implementation was used by some Ada83
compilers, where the `Name' component above would have been stored as a
pointer to a dynamic string). Following the principle that dynamic
storage management should never be introduced implicitly, an Ada95
compiler should reserve the full size for an unconstrained declared
object, and place it on the stack.

   This maximum size approach has been a source of surprise to some
users, who expect the default values of the discriminants to determine
the size reserved for an unconstrained object: "If the default is 15,
why should the object occupy a larger size?"  The answer, of course, is
that the discriminant may be later modified, and its full range of
values must be taken into account. This is why the declaration:

     type Rec (D : Positive := 15) is record
        Name : String (1..D);
     end record;

     Too_Large : Rec;

is flagged by the compiler with a warning: an attempt to create
`Too_Large' will raise `Storage_Error', because the required size
includes `Positive'Last' bytes. As the first example indicates, the
proper approach is to declare an index type of "reasonable" range so
that unconstrained objects are not too large.

   One final wrinkle: if the object is declared to be `aliased', or if
it is created in the heap by means of an allocator, then it is _not_
unconstrained: it is constrained by the default values of the
discriminants, and those values cannot be modified by full assignment.
This is because in the presence of aliasing all views of the object
(which may be manipulated by different tasks, say) must be consistent,
so it is imperative that the object, once created, remain invariant.


File: gnat_rm.info,  Node: Strict Conformance to the Ada 95 Reference Manual,  Prev: The Size of Discriminated Records with Default Discriminants,  Up: Implementation of Specific Ada Features

12.6 Strict Conformance to the Ada 95 Reference Manual
======================================================

The dynamic semantics defined by the Ada 95 Reference Manual impose a
set of run-time checks to be generated. By default, the GNAT compiler
will insert many run-time checks into the compiled code, including most
of those required by the Ada 95 Reference Manual. However, there are
three checks that are not enabled in the default mode for efficiency
reasons: arithmetic overflow checking for integer operations (including
division by zero), checks for access before elaboration on subprogram
calls, and stack overflow checking (most operating systems do not
perform this check by default).

   Strict conformance to the Ada 95 Reference Manual can be achieved by
adding three compiler options for overflow checking for integer
operations (`-gnato'), dynamic checks for access-before-elaboration on
subprogram calls and generic instantiations (`-gnatE'), and stack
overflow checking (`-fstack-check').

   Note that the result of a floating point arithmetic operation in
overflow and invalid situations, when the `Machine_Overflows' attribute
of the result type is `False', is to generate IEEE NaN and infinite
values. This is the case for machines compliant with the IEEE
floating-point standard, but on machines that are not fully compliant
with this standard, such as Alpha, the `-mieee' compiler flag must be
used for achieving IEEE confirming behavior (although at the cost of a
significant performance penalty), so infinite and and NaN values are
properly generated.


File: gnat_rm.info,  Node: Project File Reference,  Next: Obsolescent Features,  Prev: Implementation of Specific Ada Features,  Up: Top

13 Project File Reference
*************************

This chapter describes the syntax and semantics of project files.
Project files specify the options to be used when building a system.
Project files can specify global settings for all tools, as well as
tool-specific settings.  See the chapter on project files in the GNAT
Users guide for examples of use.

* Menu:

* Reserved Words::
* Lexical Elements::
* Declarations::
* Empty declarations::
* Typed string declarations::
* Variables::
* Expressions::
* Attributes::
* Project Attributes::
* Attribute References::
* External Values::
* Case Construction::
* Packages::
* Package Renamings::
* Projects::
* Project Extensions::
* Project File Elaboration::


File: gnat_rm.info,  Node: Reserved Words,  Next: Lexical Elements,  Up: Project File Reference

13.1 Reserved Words
===================

All Ada95 reserved words are reserved in project files, and cannot be
used as variable names or project names. In addition, the following are
also reserved in project files:

   * `extends'

   * `external'

   * `project'



File: gnat_rm.info,  Node: Lexical Elements,  Next: Declarations,  Prev: Reserved Words,  Up: Project File Reference

13.2 Lexical Elements
=====================

Rules for identifiers are the same as in Ada95. Identifiers are
case-insensitive.  Strings are case sensitive, except where noted.
Comments have the same form as in Ada95.

Syntax:

     simple_name ::=
       identifier

     name ::=
       simple_name {. simple_name}


File: gnat_rm.info,  Node: Declarations,  Next: Empty declarations,  Prev: Lexical Elements,  Up: Project File Reference

13.3 Declarations
=================

Declarations introduce new entities that denote types, variables,
attributes, and packages. Some declarations can only appear immediately
within a project declaration. Others can appear within a project or
within a package.

   Syntax:
     declarative_item ::=
       simple_declarative_item |
       typed_string_declaration |
       package_declaration

     simple_declarative_item ::=
       variable_declaration |
       typed_variable_declaration |
       attribute_declaration |
       case_construction |
       empty_declaration


File: gnat_rm.info,  Node: Empty declarations,  Next: Typed string declarations,  Prev: Declarations,  Up: Project File Reference

13.4 Empty declarations
=======================

     empty_declaration ::=
       null ;

   An empty declaration is allowed anywhere a declaration is allowed.
It has no effect.


File: gnat_rm.info,  Node: Typed string declarations,  Next: Variables,  Prev: Empty declarations,  Up: Project File Reference

13.5 Typed string declarations
==============================

Typed strings are sequences of string literals. Typed strings are the
only named types in project files. They are used in case constructions,
where they provide support for conditional attribute definitions.

   Syntax:
     typed_string_declaration ::=
       type <typed_string_>_simple_name is
        ( string_literal {, string_literal} );

A typed string declaration can only appear immediately within a project
declaration.

   All the string literals in a typed string declaration must be
distinct.


File: gnat_rm.info,  Node: Variables,  Next: Expressions,  Prev: Typed string declarations,  Up: Project File Reference

13.6 Variables
==============

Variables denote values, and appear as constituents of expressions.

     typed_variable_declaration ::=
       <typed_variable_>simple_name : <typed_string_>name :=  string_expression ;

     variable_declaration ::=
       <variable_>simple_name := expression;

The elaboration of a variable declaration introduces the variable and
assigns to it the value of the expression. The name of the variable is
available after the assignment symbol.

A typed_variable can only be declare once.

a non typed variable can be declared multiple times.

Before the completion of its first declaration, the value of variable
is the null string.


File: gnat_rm.info,  Node: Expressions,  Next: Attributes,  Prev: Variables,  Up: Project File Reference

13.7 Expressions
================

An expression is a formula that defines a computation or retrieval of a
value.  In a project file the value of an expression is either a string
or a list of strings. A string value in an expression is either a
literal, the current value of a variable, an external value, an
attribute reference, or a concatenation operation.

   Syntax:

     expression ::=
       term {& term}

     term ::=
       string_literal |
       string_list |
       <variable_>name |
       external_value |
       attribute_reference

     string_literal ::=
       (same as Ada)

     string_list ::=
       ( <string_>expression { , <string_>expression } )

13.7.1 Concatenation
--------------------

The following concatenation functions are defined:

       function "&" (X : String;      Y : String)      return String;
       function "&" (X : String_List; Y : String)      return String_List;
       function "&" (X : String_List; Y : String_List) return String_List;


File: gnat_rm.info,  Node: Attributes,  Next: Project Attributes,  Prev: Expressions,  Up: Project File Reference

13.8 Attributes
===============

An attribute declaration defines a property of a project or package.
This property can later be queried by means of an attribute reference.
Attribute values are strings or string lists.

   Some attributes are associative arrays. These attributes are
mappings whose domain is a set of strings. These attributes are
declared one association at a time, by specifying a point in the domain
and the corresponding image of the attribute. They may also be declared
as a full associative array, getting the same associations as the
corresponding attribute in an imported or extended project.

   Attributes that are not associative arrays are called simple
attributes.

   Syntax:
     attribute_declaration ::=
       full_associative_array_declaration |
       for attribute_designator use expression ;

     full_associative_array_declaration ::=
       for <associative_array_attribute_>simple_name use
       <project_>simple_name [ . <package_>simple_Name ] ' <attribute_>simple_name ;

     attribute_designator ::=
       <simple_attribute_>simple_name |
       <associative_array_attribute_>simple_name ( string_literal )

Some attributes are project-specific, and can only appear immediately
within a project declaration. Others are package-specific, and can only
appear within the proper package.

   The expression in an attribute definition must be a string or a
string_list.  The string literal appearing in the attribute_designator
of an associative array attribute is case-insensitive.


File: gnat_rm.info,  Node: Project Attributes,  Next: Attribute References,  Prev: Attributes,  Up: Project File Reference

13.9 Project Attributes
=======================

The following attributes apply to a project. All of them are simple
attributes.

`Object_Dir'
     Expression must be a path name. The attribute defines the
     directory in which the object files created by the build are to be
     placed. If not specified, object files are placed in the project
     directory.

`Exec_Dir'
     Expression must be a path name. The attribute defines the
     directory in which the executables created by the build are to be
     placed.  If not specified, executables are placed in the object
     directory.

`Source_Dirs'
     Expression must be a list of path names. The attribute defines the
     directories in which the source files for the project are to be
     found. If not specified, source files are found in the project
     directory.

`Source_Files'
     Expression must be a list of file names. The attribute defines the
     individual files, in the project directory, which are to be used
     as sources for the project. File names are path_names that contain
     no directory information. If the project has no sources the
     attribute must be declared explicitly with an empty list.

`Source_List_File'
     Expression must a single path name. The attribute defines a text
     file that contains a list of source file names to be used as
     sources for the project

`Library_Dir'
     Expression must be a path name. The attribute defines the
     directory in which a  library is to be built.  The directory must
     exist, must be distinct from the project's object directory, and
     must be writable.

`Library_Name'
     Expression must be a string that is a legal file name, without
     extension. The attribute defines a string that is used to generate
     the name of the library to be built by the project.

`Library_Kind'
     Argument must be a string value that must be one of the following
     `"static"', `"dynamic"' or `"relocatable"'. This string is
     case-insensitive. If this attribute is not specified, the library
     is a static library. Otherwise, the library may be dynamic or
     relocatable. This distinction is operating-system dependent.

`Library_Version'
     Expression must be a string value whose interpretation is platform
     dependent. On UNIX, it is used only for dynamic/relocatable
     libraries as the internal name of the library (the `"soname"'). If
     the library file name (built from the `Library_Name') is different
     from the `Library_Version', then the library file will be a
     symbolic link to the actual file whose name will be
     `Library_Version'.

`Library_Interface'
     Expression must be a string list. Each element of the string list
     must designate a unit of the project.  If this attribute is
     present in a Library Project File, then the project file is a
     Stand-alone Library_Project_File.

`Library_Auto_Init'
     Expression must be a single string "true" or "false",
     case-insensitive.  If this attribute is present in a Stand-alone
     Library Project File, it indicates if initialization is automatic
     when the dynamic library is loaded.

`Library_Options'
     Expression must be a string list. Indicates additional switches
     that are to be used when building a shared library.

`Library_GCC'
     Expression must be a single string. Designates an alternative to
     "gcc" for building shared libraries.

`Library_Src_Dir'
     Expression must be a path name. The attribute defines the
     directory in which the sources of the interfaces of a Stand-alone
     Library will be copied.  The directory must exist, must be
     distinct from the project's object directory and source
     directories of all project in the project tree, and must be
     writable.

`Library_Src_Dir'
     Expression must be a path name. The attribute defines the
     directory in which the ALI files of a Library will be copied.  The
     directory must exist, must be distinct from the project's object
     directory and source directoriesof all project in the project tree,
     and must be writable.

`Library_Symbol_File'
     Expression must be a single string. Its value is the single file
     name of a symbol file to be created when building a stand-alone
     library when the symbol policy is either "compliant", "controlled"
     or "restricted", on platforms that support symbol control, such as
     VMS.

`Library_Reference_Symbol_File'
     Expression must be a single string. Its value is the single file
     name of a reference symbol file that is read when the symbol
     policy is either "compliant" or "controlled", on platforms that
     support symbol control, such as VMS, when building a stand-alone
     library.

`Library_Symbol_Policy'
     Expression must be a single string. Its case-insensitive value can
     only be "autonomous", "default", "compliant", "controlled" or
     "restricted".

     This attribute is not taken into account on all platforms. It
     controls the policy for exported symbols and, on some platforms
     (like VMS) that have the notions of major and minor IDs built in
     the library files, it controls the setting of these IDs.

     "autonomous" or "default": exported symbols are not controlled.

     "compliant": if attribute Library_Reference_Symbol_File is not
     defined, then it is equivalent to policy "autonomous". If there
     are exported symbols in the reference symbol file that are not in
     the object files of the interfaces, the major ID of the library is
     increased. If there are symbols in the object files of the
     interfaces that are not in the reference symbol file, these
     symbols are put at the end of the list in the newly created symbol
     file and the minor ID is increased.

     "controlled": the attribute Library_Reference_Symbol_File must be
     difined.  The library will fail to build if the exported symbols
     in the object files of the interfaces do not match exactly the
     symbol in the symbol file.

     "restricted": The attribute Library_Symbol_File must be defined.
     The library will fail to build if there are symbols in the symbol
     file that are not in the exported symbols of the object files of
     the interfaces. Additional symbols in the object files are not
     added to the symbol file.

`Main'
     Expression must be a list of strings that are legal file names.
     These file names designate existing compilation units in the
     source directory that are legal main subprograms.

     When a project file is elaborated, as part of the execution of a
     gnatmake command, one or several executables are built and placed
     in the Exec_Dir.  If the gnatmake command does not include
     explicit file names, the executables that are built correspond to
     the files specified by this attribute.

`Externally_Built'
     Expression must be a single string. Its value must be either
     "true" of "false", case-insensitive. The default is "false". When
     the value of this attribute is "true", no attempt is made to
     compile the sources or to build the library, when the project is a
     library project.

`Main_Language'
     This is a simple attribute. Its value is a string that specifies
     the language of the main program.

`Languages'
     Expression must be a string list. Each string designates a
     programming language that is known to GNAT. The strings are
     case-insensitive.

`Locally_Removed_Files'
     This attribute is legal only in a project file that extends
     another.  Expression must be a list of strings that are legal file
     names.  Each file name must designate a source that would normally
     be inherited by the current project file. It cannot designate an
     immediate source that is not inherited. Each of the source files
     in the list are not considered to be sources of the project file:
     they are not inherited.


File: gnat_rm.info,  Node: Attribute References,  Next: External Values,  Prev: Project Attributes,  Up: Project File Reference

13.10 Attribute References
==========================

Attribute references are used to retrieve the value of previously
defined attribute for a package or project.  Syntax:
     attribute_reference ::=
       attribute_prefix ' <simple_attribute_>simple_name [ ( string_literal ) ]

     attribute_prefix ::=
       project |
       <project_simple_name | package_identifier |
       <project_>simple_name . package_identifier

If an attribute has not been specified for a given package or project,
its value is the null string or the empty list.


File: gnat_rm.info,  Node: External Values,  Next: Case Construction,  Prev: Attribute References,  Up: Project File Reference

13.11 External Values
=====================

An external value is an expression whose value is obtained from the
command that invoked the processing of the current project file
(typically a gnatmake command).

   Syntax:
     external_value ::=
       external ( string_literal [, string_literal] )

The first string_literal is the string to be used on the command line or
in the environment to specify the external value. The second
string_literal, if present, is the default to use if there is no
specification for this external value either on the command line or in
the environment.


File: gnat_rm.info,  Node: Case Construction,  Next: Packages,  Prev: External Values,  Up: Project File Reference

13.12 Case Construction
=======================

A case construction supports attribute declarations that depend on the
value of a previously declared variable.

   Syntax:
     case_construction ::=
       case <typed_variable_>name is
         {case_item}
       end case ;

     case_item ::=
       when discrete_choice_list =>
         {case_construction | attribute_declaration | empty_declaration}

     discrete_choice_list ::=
       string_literal {| string_literal} |
         others

All choices in a choice list must be distinct. The choice lists of two
distinct alternatives must be disjoint. Unlike Ada, the choice lists of
all alternatives do not need to include all values of the type. An
`others' choice must appear last in the list of alternatives.


File: gnat_rm.info,  Node: Packages,  Next: Package Renamings,  Prev: Case Construction,  Up: Project File Reference

13.13 Packages
==============

A package provides a grouping of variable declarations and attribute
declarations to be used when invoking various GNAT tools. The name of
the package indicates the tool(s) to which it applies.  Syntax:

     package_declaration ::=
       package_specification | package_renaming

     package_specification ::=
       package package_identifier is
         {simple_declarative_item}
       end package_identifier ;

     package_identifier ::=
       `Naming' | `Builder' | `Compiler' | `Binder' |
       `Linker' | `Finder'  | `Cross_Reference' |
       `gnatls' | `IDE'     | `Pretty_Printer'

13.13.1 Package Naming
----------------------

The attributes of a `Naming' package specifies the naming conventions
that apply to the source files in a project. When invoking other GNAT
tools, they will use the sources in the source directories that satisfy
these naming conventions.

   The following attributes apply to a `Naming' package:

`Casing'
     This is a simple attribute whose value is a string. Legal values
     of this string are `"lowercase"', `"uppercase"' or `"mixedcase"'.
     These strings are themselves case insensitive.

     If `Casing' is not specified, then the default is `"lowercase"'.

`Dot_Replacement'
     This is a simple attribute whose string value satisfies the
     following requirements:

        * It must not be empty

        * It cannot start or end with an alphanumeric character

        * It cannot be a single underscore

        * It cannot start with an underscore followed by an alphanumeric

        * It cannot contain a dot `'.'' if longer than one character

     If `Dot_Replacement' is not specified, then the default is `"-"'.

`Spec_Suffix'
     This is an associative array attribute, defined on language names,
     whose image is a string that must satisfy the following conditions:

        * It must not be empty

        * It cannot start with an alphanumeric character

        * It cannot start with an underscore followed by an
          alphanumeric character

     For Ada, the attribute denotes the suffix used in file names that
     contain library unit declarations, that is to say units that are
     package and subprogram declarations. If `Spec_Suffix ("Ada")' is
     not specified, then the default is `".ads"'.

     For C and C++, the attribute denotes the suffix used in file names
     that contain prototypes.

`Body_Suffix'
     This is an associative array attribute defined on language names,
     whose image is a string that must satisfy the following conditions:

        * It must not be empty

        * It cannot start with an alphanumeric character

        * It cannot start with an underscore followed by an
          alphanumeric character

        * It cannot be a suffix of `Spec_Suffix'

     For Ada, the attribute denotes the suffix used in file names that
     contain library bodies, that is to say units that are package and
     subprogram bodies.  If `Body_Suffix ("Ada")' is not specified,
     then the default is `".adb"'.

     For C and C++, the attribute denotes the suffix used in file names
     that contain source code.

`Separate_Suffix'
     This is a simple attribute whose value satisfies the same
     conditions as `Body_Suffix'.

     This attribute is specific to Ada. It denotes the suffix used in
     file names that contain separate bodies. If it is not specified,
     then it defaults to same value as `Body_Suffix ("Ada")'.

`Spec'
     This is an associative array attribute, specific to Ada, defined
     over compilation unit names. The image is a string that is the
     name of the file that contains that library unit. The file name is
     case sensitive if the conventions of the host operating system
     require it.

`Body'
     This is an associative array attribute, specific to Ada, defined
     over compilation unit names. The image is a string that is the
     name of the file that contains the library unit body for the named
     unit. The file name is case sensitive if the conventions of the
     host operating system require it.

`Specification_Exceptions'
     This is an associative array attribute defined on language names,
     whose value is a list of strings.

     This attribute is not significant for Ada.

     For C and C++, each string in the list denotes the name of a file
     that contains prototypes, but whose suffix is not necessarily the
     `Spec_Suffix' for the language.

`Implementation_Exceptions'
     This is an associative array attribute defined on language names,
     whose value is a list of strings.

     This attribute is not significant for Ada.

     For C and C++, each string in the list denotes the name of a file
     that contains source code, but whose suffix is not necessarily the
     `Body_Suffix' for the language.

   The following attributes of package `Naming' are obsolescent. They
are kept as synonyms of other attributes for compatibility with
previous versions of the Project Manager.

`Specification_Suffix'
     This is a synonym of `Spec_Suffix'.

`Implementation_Suffix'
     This is a synonym of `Body_Suffix'.

`Specification'
     This is a synonym of `Spec'.

`Implementation'
     This is a synonym of `Body'.

13.13.2 package Compiler
------------------------

The attributes of the `Compiler' package specify the compilation options
to be used by the underlying compiler.

`Default_Switches'
     This is an associative array attribute. Its domain is a set of
     language names. Its range is a string list that specifies the
     compilation options to be used when compiling a component written
     in that language, for which no file-specific switches have been
     specified.

`Switches'
     This is an associative array attribute. Its domain is a set of
     file names. Its range is a string list that specifies the
     compilation options to be used when compiling the named file. If a
     file is not specified in the Switches attribute, it is compiled
     with the options specified by Default_Switches of its language, if
     defined.

`Local_Configuration_Pragmas.'
     This is a simple attribute, whose value is a path name that
     designates a file containing configuration pragmas to be used for
     all invocations of the compiler for immediate sources of the
     project.

13.13.3 package Builder
-----------------------

The attributes of package `Builder' specify the compilation, binding,
and linking options to be used when building an executable for a
project. The following attributes apply to package `Builder':

`Default_Switches'
     This is an associative array attribute. Its domain is a set of
     language names. Its range is a string list that specifies options
     to be used when building a main written in that language, for
     which no file-specific switches have been specified.

`Switches'
     This is an associative array attribute. Its domain is a set of
     file names. Its range is a string list that specifies options to
     be used when building the named main file. If a main file is not
     specified in the Switches attribute, it is built with the options
     specified by Default_Switches of its language, if defined.

`Global_Configuration_Pragmas'
     This is a simple attribute, whose value is a path name that
     designates a file that contains configuration pragmas to be used
     in every build of an executable. If both local and global
     configuration pragmas are specified, a compilation makes use of
     both sets.

`Executable'
     This is an associative array attribute. Its domain is a set of
     main source file names. Its range is a simple string that specifies
     the executable file name to be used when linking the specified
     main source.  If a main source is not specified in the Executable
     attribute, the executable file name is deducted from the main
     source file name.  This attribute has no effect if its value is
     the empty string.

`Executable_Suffix'
     This is a simple attribute whose value is the suffix to be added to
     the executables that don't have an attribute Executable specified.

13.13.4 package Gnatls
----------------------

The attributes of package `Gnatls' specify the tool options to be used
when invoking the library browser `gnatls'.  The following attributes
apply to package `Gnatls':

`Switches'
     This is a single attribute with a string list value. Each non
     empty string in the list is an option when invoking `gnatls'.

13.13.5 package Binder
----------------------

The attributes of package `Binder' specify the options to be used when
invoking the binder in the construction of an executable.  The
following attributes apply to package `Binder':

`Default_Switches'
     This is an associative array attribute. Its domain is a set of
     language names. Its range is a string list that specifies options
     to be used when binding a main written in that language, for which
     no file-specific switches have been specified.

`Switches'
     This is an associative array attribute. Its domain is a set of
     file names. Its range is a string list that specifies options to
     be used when binding the named main file. If a main file is not
     specified in the Switches attribute, it is boundt with the options
     specified by Default_Switches of its language, if defined.

13.13.6 package Linker
----------------------

The attributes of package `Linker' specify the options to be used when
invoking the linker in the construction of an executable.  The
following attributes apply to package `Linker':

`Default_Switches'
     This is an associative array attribute. Its domain is a set of
     language names. Its range is a string list that specifies options
     to be used when linking a main written in that language, for which
     no file-specific switches have been specified.

`Switches'
     This is an associative array attribute. Its domain is a set of
     file names. Its range is a string list that specifies options to
     be used when linking the named main file. If a main file is not
     specified in the Switches attribute, it is linked with the options
     specified by Default_Switches of its language, if defined.

`Linker_Options'
     This is a string list attribute. Its value specifies additional
     options that be givent to the linker when linking an executable.
     This attribute is not used in the main project, only in projects
     imported directly or indirectly.


13.13.7 package Cross_Reference
-------------------------------

The attributes of package `Cross_Reference' specify the tool options to
be used when invoking the library tool `gnatxref'.  The following
attributes apply to package `Cross_Reference':

`Default_Switches'
     This is an associative array attribute. Its domain is a set of
     language names. Its range is a string list that specifies options
     to be used when calling `gnatxref' on a source written in that
     language, for which no file-specific switches have been specified.

`Switches'
     This is an associative array attribute. Its domain is a set of
     file names. Its range is a string list that specifies options to
     be used when calling `gnatxref' on the named main source.  If a
     source is not specified in the Switches attribute, `gnatxref' will
     be called with the options specified by Default_Switches of its
     language, if defined.

13.13.8 package   Finder
------------------------

The attributes of package `Finder' specify the tool options to be used
when invoking the search tool `gnatfind'.  The following attributes
apply to package `Finder':

`Default_Switches'
     This is an associative array attribute. Its domain is a set of
     language names. Its range is a string list that specifies options
     to be used when calling `gnatfind' on a source written in that
     language, for which no file-specific switches have been specified.

`Switches'
     This is an associative array attribute. Its domain is a set of
     file names. Its range is a string list that specifies options to
     be used when calling `gnatfind' on the named main source.  If a
     source is not specified in the Switches attribute, `gnatfind' will
     be called with the options specified by Default_Switches of its
     language, if defined.

13.13.9 package Pretty_Printer
------------------------------

The attributes of package `Pretty_Printer' specify the tool options to
be used when invoking the formatting tool `gnatpp'.  The following
attributes apply to package `Pretty_Printer':

`Default_switches'
     This is an associative array attribute. Its domain is a set of
     language names. Its range is a string list that specifies options
     to be used when calling `gnatpp' on a source written in that
     language, for which no file-specific switches have been specified.

`Switches'
     This is an associative array attribute. Its domain is a set of
     file names. Its range is a string list that specifies options to
     be used when calling `gnatpp' on the named main source.  If a
     source is not specified in the Switches attribute, `gnatpp' will
     be called with the options specified by Default_Switches of its
     language, if defined.

13.13.10 package gnatstub
-------------------------

The attributes of package `gnatstub' specify the tool options to be used
when invoking the tool `gnatstub'.  The following attributes apply to
package `gnatstub':

`Default_switches'
     This is an associative array attribute. Its domain is a set of
     language names. Its range is a string list that specifies options
     to be used when calling `gnatstub' on a source written in that
     language, for which no file-specific switches have been specified.

`Switches'
     This is an associative array attribute. Its domain is a set of
     file names. Its range is a string list that specifies options to
     be used when calling `gnatstub' on the named main source.  If a
     source is not specified in the Switches attribute, `gnatpp' will
     be called with the options specified by Default_Switches of its
     language, if defined.

13.13.11 package Eliminate
--------------------------

The attributes of package `Eliminate' specify the tool options to be
used when invoking the tool `gnatelim'.  The following attributes apply
to package `Eliminate':

`Default_switches'
     This is an associative array attribute. Its domain is a set of
     language names. Its range is a string list that specifies options
     to be used when calling `gnatelim' on a source written in that
     language, for which no file-specific switches have been specified.

`Switches'
     This is an associative array attribute. Its domain is a set of
     file names. Its range is a string list that specifies options to
     be used when calling `gnatelim' on the named main source.  If a
     source is not specified in the Switches attribute, `gnatelim' will
     be called with the options specified by Default_Switches of its
     language, if defined.

13.13.12 package Metrics
------------------------

The attributes of package `Metrics' specify the tool options to be used
when invoking the tool `gnatmetric'.  The following attributes apply to
package `Metrics':

`Default_switches'
     This is an associative array attribute. Its domain is a set of
     language names. Its range is a string list that specifies options
     to be used when calling `gnatmetric' on a source written in that
     language, for which no file-specific switches have been specified.

`Switches'
     This is an associative array attribute. Its domain is a set of
     file names. Its range is a string list that specifies options to
     be used when calling `gnatmetric' on the named main source.  If a
     source is not specified in the Switches attribute, `gnatmetric'
     will be called with the options specified by Default_Switches of
     its language, if defined.

13.13.13 package IDE
--------------------

The attributes of package `IDE' specify the options to be used when
using an Integrated Development Environment such as `GPS'.

`Remote_Host'
     This is a simple attribute. Its value is a string that designates
     the remote host in a cross-compilation environment, to be used for
     remote compilation and debugging. This field should not be
     specified when running on the local machine.

`Program_Host'
     This is a simple attribute. Its value is a string that specifies
     the name of IP address of the embedded target in a
     cross-compilation environment, on which the program should execute.

`Communication_Protocol'
     This is a simple string attribute. Its value is the name of the
     protocol to use to communicate with the target in a
     cross-compilation environment, e.g. `"wtx"' or `"vxworks"'.

`Compiler_Command'
     This is an associative array attribute, whose domain is a language
     name. Its value is  string that denotes the command to be used to
     invoke the compiler.  The value of `Compiler_Command ("Ada")' is
     expected to be compatible with gnatmake, in particular in the
     handling of switches.

`Debugger_Command'
     This is simple attribute, Its value is a string that specifies the
     name of the debugger to be used, such as gdb,
     powerpc-wrs-vxworks-gdb or gdb-4.

`Default_Switches'
     This is an associative array attribute. Its indexes are the name
     of the external tools that the GNAT Programming System (GPS) is
     supporting. Its value is a list of switches to use when invoking
     that tool.

`Gnatlist'
     This is a simple attribute.  Its value is a string that specifies
     the name of the `gnatls' utility to be used to retrieve
     information about the predefined path; e.g., `"gnatls"',
     `"powerpc-wrs-vxworks-gnatls"'.

`VCS_Kind'
     This is a simple attribute. Its value is a string used to specify
     the Version Control System (VCS) to be used for this project, e.g
     CVS, RCS ClearCase or Perforce.

`VCS_File_Check'
     This is a simple attribute. Its value is a string that specifies
     the command used by the VCS to check the validity of a file, either
     when the user explicitly asks for a check, or as a sanity check
     before doing the check-in.

`VCS_Log_Check'
     This is a simple attribute. Its value is a string that specifies
     the command used by the VCS to check the validity of a log file.



File: gnat_rm.info,  Node: Package Renamings,  Next: Projects,  Prev: Packages,  Up: Project File Reference

13.14 Package Renamings
=======================

A package can be defined by a renaming declaration. The new package
renames a package declared in a different project file, and has the
same attributes as the package it renames.  Syntax:
     package_renaming ::==
       package package_identifier renames
            <project_>simple_name.package_identifier ;

The package_identifier of the renamed package must be the same as the
package_identifier. The project whose name is the prefix of the renamed
package must contain a package declaration with this name. This project
must appear in the context_clause of the enclosing project declaration,
or be the parent project of the enclosing child project.


File: gnat_rm.info,  Node: Projects,  Next: Project Extensions,  Prev: Package Renamings,  Up: Project File Reference

13.15 Projects
==============

A project file specifies a set of rules for constructing a software
system.  A project file can be self-contained, or depend on other
project files.  Dependencies are expressed through a context clause
that names other projects.

   Syntax:

     project ::=
       context_clause project_declaration

     project_declaration ::=
       simple_project_declaration | project_extension

     simple_project_declaration ::=
       project <project_>simple_name is
         {declarative_item}
       end <project_>simple_name;

     context_clause ::=
       {with_clause}

     with_clause ::=
       [limited] with path_name { , path_name } ;

     path_name ::=
        string_literal

A path name denotes a project file. A path name can be absolute or
relative.  An absolute path name includes a sequence of directories, in
the syntax of the host operating system, that identifies uniquely the
project file in the file system. A relative path name identifies the
project file, relative to the directory that contains the current
project, or relative to a directory listed in the environment variable
ADA_PROJECT_PATH.  Path names are case sensitive if file names in the
host operating system are case sensitive.

   The syntax of the environment variable ADA_PROJECT_PATH is a list of
directory names separated by colons (semicolons on Windows).

   A given project name can appear only once in a context_clause.

   It is illegal for a project imported by a context clause to refer,
directly or indirectly, to the project in which this context clause
appears (the dependency graph cannot contain cycles), except when one
of the with_clause in the cycle is a `limited with'.


File: gnat_rm.info,  Node: Project Extensions,  Next: Project File Elaboration,  Prev: Projects,  Up: Project File Reference

13.16 Project Extensions
========================

A project extension introduces a new project, which inherits the
declarations of another project.  Syntax:

     project_extension ::=
       project <project_>simple_name  extends path_name is
         {declarative_item}
       end <project_>simple_name;

The project extension declares a child project. The child project
inherits all the declarations and all the files of the parent project,
These inherited declaration can be overridden in the child project, by
means of suitable declarations.


File: gnat_rm.info,  Node: Project File Elaboration,  Prev: Project Extensions,  Up: Project File Reference

13.17 Project File Elaboration
==============================

A project file is processed as part of the invocation of a gnat tool
that uses the project option. Elaboration of the process file consists
in the sequential elaboration of all its declarations. The computed
values of attributes and variables in the project are then used to
establish the environment in which the gnat tool will execute.


File: gnat_rm.info,  Node: Obsolescent Features,  Next: GNU Free Documentation License,  Prev: Project File Reference,  Up: Top

14 Obsolescent Features
***********************

This chapter describes features that are provided by GNAT, but are
considered obsolescent since there are preferred ways of achieving the
same effect. These features are provided solely for historical
compatibility purposes.

* Menu:

* pragma No_Run_Time::
* pragma Ravenscar::
* pragma Restricted_Run_Time::


File: gnat_rm.info,  Node: pragma No_Run_Time,  Next: pragma Ravenscar,  Up: Obsolescent Features

14.1 pragma No_Run_Time
=======================

The pragma `No_Run_Time' is used to achieve an affect similar to the
use of the "Zero Foot Print" configurable run time, but without
requiring a specially configured run time. The result of using this
pragma, which must be used for all units in a partition, is to restrict
the use of any language features requiring run-time support code. The
preferred usage is to use an appropriately configured run-time that
includes just those features that are to be made accessible.


File: gnat_rm.info,  Node: pragma Ravenscar,  Next: pragma Restricted_Run_Time,  Prev: pragma No_Run_Time,  Up: Obsolescent Features

14.2 pragma Ravenscar
=====================

The pragma `Ravenscar' has exactly the same effect as pragma `Profile
(Ravenscar)'. The latter usage is preferred since it is part of the new
Ada 2005 standard.


File: gnat_rm.info,  Node: pragma Restricted_Run_Time,  Prev: pragma Ravenscar,  Up: Obsolescent Features

14.3 pragma Restricted_Run_Time
===============================

The pragma `Restricted_Run_Time' has exactly the same effect as pragma
`Profile (Restricted)'. The latter usage is preferred since the Ada
2005 pragma `Profile' is intended for this kind of implementation
dependent addition.


File: gnat_rm.info,  Node: GNU Free Documentation License,  Next: Index,  Prev: Obsolescent Features,  Up: Top

GNU Free Documentation License
******************************

                      Version 1.2, November 2002

     Copyright (C) 2000,2001,2002 Free Software Foundation, Inc.
     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA

     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

  0. PREAMBLE

     The purpose of this License is to make a manual, textbook, or other
     functional and useful document "free" in the sense of freedom: to
     assure everyone the effective freedom to copy and redistribute it,
     with or without modifying it, either commercially or
     noncommercially.  Secondarily, this License preserves for the
     author and publisher a way to get credit for their work, while not
     being considered responsible for modifications made by others.

     This License is a kind of "copyleft", which means that derivative
     works of the document must themselves be free in the same sense.
     It complements the GNU General Public License, which is a copyleft
     license designed for free software.

     We have designed this License in order to use it for manuals for
     free software, because free software needs free documentation: a
     free program should come with manuals providing the same freedoms
     that the software does.  But this License is not limited to
     software manuals; it can be used for any textual work, regardless
     of subject matter or whether it is published as a printed book.
     We recommend this License principally for works whose purpose is
     instruction or reference.

  1. APPLICABILITY AND DEFINITIONS

     This License applies to any manual or other work, in any medium,
     that contains a notice placed by the copyright holder saying it
     can be distributed under the terms of this License.  Such a notice
     grants a world-wide, royalty-free license, unlimited in duration,
     to use that work under the conditions stated herein.  The
     "Document", below, refers to any such manual or work.  Any member
     of the public is a licensee, and is addressed as "you".  You
     accept the license if you copy, modify or distribute the work in a
     way requiring permission under copyright law.

     A "Modified Version" of the Document means any work containing the
     Document or a portion of it, either copied verbatim, or with
     modifications and/or translated into another language.

     A "Secondary Section" is a named appendix or a front-matter section
     of the Document that deals exclusively with the relationship of the
     publishers or authors of the Document to the Document's overall
     subject (or to related matters) and contains nothing that could
     fall directly within that overall subject.  (Thus, if the Document
     is in part a textbook of mathematics, a Secondary Section may not
     explain any mathematics.)  The relationship could be a matter of
     historical connection with the subject or with related matters, or
     of legal, commercial, philosophical, ethical or political position
     regarding them.

     The "Invariant Sections" are certain Secondary Sections whose
     titles are designated, as being those of Invariant Sections, in
     the notice that says that the Document is released under this
     License.  If a section does not fit the above definition of
     Secondary then it is not allowed to be designated as Invariant.
     The Document may contain zero Invariant Sections.  If the Document
     does not identify any Invariant Sections then there are none.

     The "Cover Texts" are certain short passages of text that are
     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
     that says that the Document is released under this License.  A
     Front-Cover Text may be at most 5 words, and a Back-Cover Text may
     be at most 25 words.

     A "Transparent" copy of the Document means a machine-readable copy,
     represented in a format whose specification is available to the
     general public, that is suitable for revising the document
     straightforwardly with generic text editors or (for images
     composed of pixels) generic paint programs or (for drawings) some
     widely available drawing editor, and that is suitable for input to
     text formatters or for automatic translation to a variety of
     formats suitable for input to text formatters.  A copy made in an
     otherwise Transparent file format whose markup, or absence of
     markup, has been arranged to thwart or discourage subsequent
     modification by readers is not Transparent.  An image format is
     not Transparent if used for any substantial amount of text.  A
     copy that is not "Transparent" is called "Opaque".

     Examples of suitable formats for Transparent copies include plain
     ASCII without markup, Texinfo input format, LaTeX input format,
     SGML or XML using a publicly available DTD, and
     standard-conforming simple HTML, PostScript or PDF designed for
     human modification.  Examples of transparent image formats include
     PNG, XCF and JPG.  Opaque formats include proprietary formats that
     can be read and edited only by proprietary word processors, SGML or
     XML for which the DTD and/or processing tools are not generally
     available, and the machine-generated HTML, PostScript or PDF
     produced by some word processors for output purposes only.

     The "Title Page" means, for a printed book, the title page itself,
     plus such following pages as are needed to hold, legibly, the
     material this License requires to appear in the title page.  For
     works in formats which do not have any title page as such, "Title
     Page" means the text near the most prominent appearance of the
     work's title, preceding the beginning of the body of the text.

     A section "Entitled XYZ" means a named subunit of the Document
     whose title either is precisely XYZ or contains XYZ in parentheses
     following text that translates XYZ in another language.  (Here XYZ
     stands for a specific section name mentioned below, such as
     "Acknowledgements", "Dedications", "Endorsements", or "History".)
     To "Preserve the Title" of such a section when you modify the
     Document means that it remains a section "Entitled XYZ" according
     to this definition.

     The Document may include Warranty Disclaimers next to the notice
     which states that this License applies to the Document.  These
     Warranty Disclaimers are considered to be included by reference in
     this License, but only as regards disclaiming warranties: any other
     implication that these Warranty Disclaimers may have is void and
     has no effect on the meaning of this License.

  2. VERBATIM COPYING

     You may copy and distribute the Document in any medium, either
     commercially or noncommercially, provided that this License, the
     copyright notices, and the license notice saying this License
     applies to the Document are reproduced in all copies, and that you
     add no other conditions whatsoever to those of this License.  You
     may not use technical measures to obstruct or control the reading
     or further copying of the copies you make or distribute.  However,
     you may accept compensation in exchange for copies.  If you
     distribute a large enough number of copies you must also follow
     the conditions in section 3.

     You may also lend copies, under the same conditions stated above,
     and you may publicly display copies.

  3. COPYING IN QUANTITY

     If you publish printed copies (or copies in media that commonly
     have printed covers) of the Document, numbering more than 100, and
     the Document's license notice requires Cover Texts, you must
     enclose the copies in covers that carry, clearly and legibly, all
     these Cover Texts: Front-Cover Texts on the front cover, and
     Back-Cover Texts on the back cover.  Both covers must also clearly
     and legibly identify you as the publisher of these copies.  The
     front cover must present the full title with all words of the
     title equally prominent and visible.  You may add other material
     on the covers in addition.  Copying with changes limited to the
     covers, as long as they preserve the title of the Document and
     satisfy these conditions, can be treated as verbatim copying in
     other respects.

     If the required texts for either cover are too voluminous to fit
     legibly, you should put the first ones listed (as many as fit
     reasonably) on the actual cover, and continue the rest onto
     adjacent pages.

     If you publish or distribute Opaque copies of the Document
     numbering more than 100, you must either include a
     machine-readable Transparent copy along with each Opaque copy, or
     state in or with each Opaque copy a computer-network location from
     which the general network-using public has access to download
     using public-standard network protocols a complete Transparent
     copy of the Document, free of added material.  If you use the
     latter option, you must take reasonably prudent steps, when you
     begin distribution of Opaque copies in quantity, to ensure that
     this Transparent copy will remain thus accessible at the stated
     location until at least one year after the last time you
     distribute an Opaque copy (directly or through your agents or
     retailers) of that edition to the public.

     It is requested, but not required, that you contact the authors of
     the Document well before redistributing any large number of
     copies, to give them a chance to provide you with an updated
     version of the Document.

  4. MODIFICATIONS

     You may copy and distribute a Modified Version of the Document
     under the conditions of sections 2 and 3 above, provided that you
     release the Modified Version under precisely this License, with
     the Modified Version filling the role of the Document, thus
     licensing distribution and modification of the Modified Version to
     whoever possesses a copy of it.  In addition, you must do these
     things in the Modified Version:

       A. Use in the Title Page (and on the covers, if any) a title
          distinct from that of the Document, and from those of
          previous versions (which should, if there were any, be listed
          in the History section of the Document).  You may use the
          same title as a previous version if the original publisher of
          that version gives permission.

       B. List on the Title Page, as authors, one or more persons or
          entities responsible for authorship of the modifications in
          the Modified Version, together with at least five of the
          principal authors of the Document (all of its principal
          authors, if it has fewer than five), unless they release you
          from this requirement.

       C. State on the Title page the name of the publisher of the
          Modified Version, as the publisher.

       D. Preserve all the copyright notices of the Document.

       E. Add an appropriate copyright notice for your modifications
          adjacent to the other copyright notices.

       F. Include, immediately after the copyright notices, a license
          notice giving the public permission to use the Modified
          Version under the terms of this License, in the form shown in
          the Addendum below.

       G. Preserve in that license notice the full lists of Invariant
          Sections and required Cover Texts given in the Document's
          license notice.

       H. Include an unaltered copy of this License.

       I. Preserve the section Entitled "History", Preserve its Title,
          and add to it an item stating at least the title, year, new
          authors, and publisher of the Modified Version as given on
          the Title Page.  If there is no section Entitled "History" in
          the Document, create one stating the title, year, authors,
          and publisher of the Document as given on its Title Page,
          then add an item describing the Modified Version as stated in
          the previous sentence.

       J. Preserve the network location, if any, given in the Document
          for public access to a Transparent copy of the Document, and
          likewise the network locations given in the Document for
          previous versions it was based on.  These may be placed in
          the "History" section.  You may omit a network location for a
          work that was published at least four years before the
          Document itself, or if the original publisher of the version
          it refers to gives permission.

       K. For any section Entitled "Acknowledgements" or "Dedications",
          Preserve the Title of the section, and preserve in the
          section all the substance and tone of each of the contributor
          acknowledgements and/or dedications given therein.

       L. Preserve all the Invariant Sections of the Document,
          unaltered in their text and in their titles.  Section numbers
          or the equivalent are not considered part of the section
          titles.

       M. Delete any section Entitled "Endorsements".  Such a section
          may not be included in the Modified Version.

       N. Do not retitle any existing section to be Entitled
          "Endorsements" or to conflict in title with any Invariant
          Section.

       O. Preserve any Warranty Disclaimers.

     If the Modified Version includes new front-matter sections or
     appendices that qualify as Secondary Sections and contain no
     material copied from the Document, you may at your option
     designate some or all of these sections as invariant.  To do this,
     add their titles to the list of Invariant Sections in the Modified
     Version's license notice.  These titles must be distinct from any
     other section titles.

     You may add a section Entitled "Endorsements", provided it contains
     nothing but endorsements of your Modified Version by various
     parties--for example, statements of peer review or that the text
     has been approved by an organization as the authoritative
     definition of a standard.

     You may add a passage of up to five words as a Front-Cover Text,
     and a passage of up to 25 words as a Back-Cover Text, to the end
     of the list of Cover Texts in the Modified Version.  Only one
     passage of Front-Cover Text and one of Back-Cover Text may be
     added by (or through arrangements made by) any one entity.  If the
     Document already includes a cover text for the same cover,
     previously added by you or by arrangement made by the same entity
     you are acting on behalf of, you may not add another; but you may
     replace the old one, on explicit permission from the previous
     publisher that added the old one.

     The author(s) and publisher(s) of the Document do not by this
     License give permission to use their names for publicity for or to
     assert or imply endorsement of any Modified Version.

  5. COMBINING DOCUMENTS

     You may combine the Document with other documents released under
     this License, under the terms defined in section 4 above for
     modified versions, provided that you include in the combination
     all of the Invariant Sections of all of the original documents,
     unmodified, and list them all as Invariant Sections of your
     combined work in its license notice, and that you preserve all
     their Warranty Disclaimers.

     The combined work need only contain one copy of this License, and
     multiple identical Invariant Sections may be replaced with a single
     copy.  If there are multiple Invariant Sections with the same name
     but different contents, make the title of each such section unique
     by adding at the end of it, in parentheses, the name of the
     original author or publisher of that section if known, or else a
     unique number.  Make the same adjustment to the section titles in
     the list of Invariant Sections in the license notice of the
     combined work.

     In the combination, you must combine any sections Entitled
     "History" in the various original documents, forming one section
     Entitled "History"; likewise combine any sections Entitled
     "Acknowledgements", and any sections Entitled "Dedications".  You
     must delete all sections Entitled "Endorsements."

  6. COLLECTIONS OF DOCUMENTS

     You may make a collection consisting of the Document and other
     documents released under this License, and replace the individual
     copies of this License in the various documents with a single copy
     that is included in the collection, provided that you follow the
     rules of this License for verbatim copying of each of the
     documents in all other respects.

     You may extract a single document from such a collection, and
     distribute it individually under this License, provided you insert
     a copy of this License into the extracted document, and follow
     this License in all other respects regarding verbatim copying of
     that document.

  7. AGGREGATION WITH INDEPENDENT WORKS

     A compilation of the Document or its derivatives with other
     separate and independent documents or works, in or on a volume of
     a storage or distribution medium, is called an "aggregate" if the
     copyright resulting from the compilation is not used to limit the
     legal rights of the compilation's users beyond what the individual
     works permit.  When the Document is included in an aggregate, this
     License does not apply to the other works in the aggregate which
     are not themselves derivative works of the Document.

     If the Cover Text requirement of section 3 is applicable to these
     copies of the Document, then if the Document is less than one half
     of the entire aggregate, the Document's Cover Texts may be placed
     on covers that bracket the Document within the aggregate, or the
     electronic equivalent of covers if the Document is in electronic
     form.  Otherwise they must appear on printed covers that bracket
     the whole aggregate.

  8. TRANSLATION

     Translation is considered a kind of modification, so you may
     distribute translations of the Document under the terms of section
     4.  Replacing Invariant Sections with translations requires special
     permission from their copyright holders, but you may include
     translations of some or all Invariant Sections in addition to the
     original versions of these Invariant Sections.  You may include a
     translation of this License, and all the license notices in the
     Document, and any Warranty Disclaimers, provided that you also
     include the original English version of this License and the
     original versions of those notices and disclaimers.  In case of a
     disagreement between the translation and the original version of
     this License or a notice or disclaimer, the original version will
     prevail.

     If a section in the Document is Entitled "Acknowledgements",
     "Dedications", or "History", the requirement (section 4) to
     Preserve its Title (section 1) will typically require changing the
     actual title.

  9. TERMINATION

     You may not copy, modify, sublicense, or distribute the Document
     except as expressly provided for under this License.  Any other
     attempt to copy, modify, sublicense or distribute the Document is
     void, and will automatically terminate your rights under this
     License.  However, parties who have received copies, or rights,
     from you under this License will not have their licenses
     terminated so long as such parties remain in full compliance.

 10. FUTURE REVISIONS OF THIS LICENSE

     The Free Software Foundation may publish new, revised versions of
     the GNU Free Documentation License from time to time.  Such new
     versions will be similar in spirit to the present version, but may
     differ in detail to address new problems or concerns.  See
     `http://www.gnu.org/copyleft/'.

     Each version of the License is given a distinguishing version
     number.  If the Document specifies that a particular numbered
     version of this License "or any later version" applies to it, you
     have the option of following the terms and conditions either of
     that specified version or of any later version that has been
     published (not as a draft) by the Free Software Foundation.  If
     the Document does not specify a version number of this License,
     you may choose any version ever published (not as a draft) by the
     Free Software Foundation.

ADDENDUM: How to use this License for your documents
====================================================

To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:

       Copyright (C)  YEAR  YOUR NAME.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.2
       or any later version published by the Free Software Foundation;
       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
       Texts.  A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.

   If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the "with...Texts." line with this:

         with the Invariant Sections being LIST THEIR TITLES, with
         the Front-Cover Texts being LIST, and with the Back-Cover Texts
         being LIST.

   If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.

   If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of
free software license, such as the GNU General Public License, to
permit their use in free software.


File: gnat_rm.info,  Node: Index,  Prev: GNU Free Documentation License,  Up: Top

Index
*****

[index]
* Menu:

* -gnatR switch:                         Determining the Representations chosen by GNAT.
                                                             (line    6)
* ___lock file (for shared passive packages): GNAT Implementation of Shared Passive Packages.
                                                             (line   69)
* Abort_Defer:                           Pragma Abort_Defer. (line    6)
* Abort_Signal:                          Abort_Signal.       (line    6)
* Access values, testing for:            Has_Access_Values.  (line    6)
* Access, unrestricted:                  Unrestricted_Access.
                                                             (line    6)
* Accuracy requirements:                 Implementation Advice.
                                                             (line 1206)
* Accuracy, complex arithmetic:          Implementation Advice.
                                                             (line 1219)
* Ada 83 attributes <1>:                 Mantissa.           (line    6)
* Ada 83 attributes <2>:                 Safe_Emax.          (line    6)
* Ada 83 attributes <3>:                 Emax.               (line    6)
* Ada 83 attributes <4>:                 Small.              (line    6)
* Ada 83 attributes <5>:                 Safe_Large.         (line    6)
* Ada 83 attributes <6>:                 Large.              (line    6)
* Ada 83 attributes:                     Epsilon.            (line    6)
* Ada 95 ISO/ANSI Standard:              What This Reference Manual Contains.
                                                             (line   64)
* Ada.Characters.Handling:               Implementation Advice.
                                                             (line  677)
* Ada.Characters.Latin_9 (a-chlat9.ads): Ada.Characters.Latin_9 (a-chlat9.ads).
                                                             (line    6)
* Ada.Characters.Wide_Latin_1 (a-cwila1.ads): Ada.Characters.Wide_Latin_1 (a-cwila1.ads).
                                                             (line    6)
* Ada.Characters.Wide_Latin_9 (a-cwila1.ads): Ada.Characters.Wide_Latin_9 (a-cwila9.ads).
                                                             (line    6)
* Ada.Characters.Wide_Wide_Latin_1 (a-czila1.ads): Ada.Characters.Wide_Wide_Latin_1 (a-czila1.ads).
                                                             (line    6)
* Ada.Characters.Wide_Wide_Latin_9 (a-czila9.ads): Ada.Characters.Wide_Wide_Latin_9 (a-czila9.ads).
                                                             (line    6)
* Ada.Command_Line.Environment (a-colien.ads): Ada.Command_Line.Environment (a-colien.ads).
                                                             (line    6)
* Ada.Command_Line.Remove (a-colire.ads): Ada.Command_Line.Remove (a-colire.ads).
                                                             (line    6)
* Ada.Direct_IO.C_Streams (a-diocst.ads): Ada.Direct_IO.C_Streams (a-diocst.ads).
                                                             (line    6)
* Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads): Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads).
                                                             (line    6)
* Ada.Exceptions.Traceback (a-exctra.ads): Ada.Exceptions.Traceback (a-exctra.ads).
                                                             (line    6)
* Ada.Sequential_IO.C_Streams (a-siocst.ads): Ada.Sequential_IO.C_Streams (a-siocst.ads).
                                                             (line    6)
* Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads): Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads).
                                                             (line    6)
* Ada.Strings.Unbounded.Text_IO (a-suteio.ads): Ada.Strings.Unbounded.Text_IO (a-suteio.ads).
                                                             (line    6)
* Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads): Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads).
                                                             (line    6)
* Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads): Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads).
                                                             (line    6)
* Ada.Text_IO.C_Streams (a-tiocst.ads):  Ada.Text_IO.C_Streams (a-tiocst.ads).
                                                             (line    6)
* Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads): Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads).
                                                             (line    6)
* Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads): Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads).
                                                             (line    6)
* Ada_05:                                Pragma Ada_05.      (line    6)
* Ada_83:                                Pragma Ada_83.      (line    6)
* Ada_95:                                Pragma Ada_95.      (line    6)
* Address Clause:                        Address Clauses.    (line    6)
* Address clauses:                       Implementation Advice.
                                                             (line  330)
* Address image:                         System.Address_Image (s-addima.ads).
                                                             (line    6)
* Address of subprogram code:            Code_Address.       (line    6)
* Address, as private type:              Implementation Advice.
                                                             (line  552)
* Address, operations of:                Implementation Advice.
                                                             (line  559)
* Address_Size:                          Address_Size.       (line    6)
* Alignment Clause:                      Alignment Clauses.  (line    6)
* Alignment clauses:                     Implementation Advice.
                                                             (line  366)
* Alignment, default:                    Alignment Clauses.  (line   79)
* Alignment, maximum:                    Maximum_Alignment.  (line    6)
* Alignments of components:              Pragma Component_Alignment.
                                                             (line    6)
* Alternative Character Sets:            Implementation Advice.
                                                             (line  122)
* Annex E:                               GNAT Implementation of Shared Passive Packages.
                                                             (line   10)
* Annotate:                              Pragma Annotate.    (line    6)
* Argument passing mechanisms:           Pragma Export_Function.
                                                             (line    6)
* Array splitter:                        GNAT.Array_Split (g-arrspl.ads).
                                                             (line    6)
* Arrays, extendable <1>:                GNAT.Dynamic_Tables (g-dyntab.ads).
                                                             (line    6)
* Arrays, extendable:                    GNAT.Table (g-table.ads).
                                                             (line    6)
* Arrays, multidimensional:              Implementation Advice.
                                                             (line  197)
* Asm_Input:                             Asm_Input.          (line    6)
* Asm_Output:                            Asm_Output.         (line    6)
* Assert:                                Pragma Assert.      (line    6)
* Assert_Failure, exception:             System.Assertions (s-assert.ads).
                                                             (line    6)
* Assertions:                            System.Assertions (s-assert.ads).
                                                             (line    6)
* Ast_Entry:                             Pragma Ast_Entry.   (line    6)
* AST_Entry:                             AST_Entry.          (line    6)
* Attribute:                             Address Clauses.    (line   83)
* AWK:                                   GNAT.AWK (g-awk.ads).
                                                             (line    6)
* Biased representation:                 Biased Representation.
                                                             (line    6)
* Big endian:                            Default_Bit_Order.  (line    6)
* Bit:                                   Bit.                (line    6)
* bit ordering:                          Bit_Order Clauses.  (line    6)
* Bit ordering:                          Implementation Advice.
                                                             (line  539)
* Bit_Order Clause:                      Bit_Order Clauses.  (line    6)
* Bit_Position:                          Bit_Position.       (line    6)
* Bounded Buffers:                       GNAT.Bounded_Buffers (g-boubuf.ads).
                                                             (line    6)
* Bounded errors:                        Implementation Advice.
                                                             (line   46)
* Bounded-length strings:                Implementation Advice.
                                                             (line  686)
* Bubble sort <1>:                       GNAT.Bubble_Sort_G (g-busorg.ads).
                                                             (line    6)
* Bubble sort <2>:                       GNAT.Bubble_Sort_A (g-busora.ads).
                                                             (line    6)
* Bubble sort:                           GNAT.Bubble_Sort (g-bubsor.ads).
                                                             (line    6)
* byte ordering:                         Effect of Bit_Order on Byte Ordering.
                                                             (line    6)
* C streams, interfacing:                Interfaces.C.Streams (i-cstrea.ads).
                                                             (line    6)
* C Streams, Interfacing with Direct_IO: Ada.Direct_IO.C_Streams (a-diocst.ads).
                                                             (line    6)
* C Streams, Interfacing with Sequential_IO: Ada.Sequential_IO.C_Streams (a-siocst.ads).
                                                             (line    6)
* C Streams, Interfacing with Stream_IO: Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads).
                                                             (line    6)
* C Streams, Interfacing with Text_IO:   Ada.Text_IO.C_Streams (a-tiocst.ads).
                                                             (line    6)
* C Streams, Interfacing with Wide_Text_IO: Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads).
                                                             (line    6)
* C Streams, Interfacing with Wide_Wide_Text_IO: Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads).
                                                             (line    6)
* C++ interfacing:                       Interfaces.CPP (i-cpp.ads).
                                                             (line    6)
* C, interfacing with:                   Implementation Advice.
                                                             (line  782)
* C_Pass_By_Copy:                        Pragma C_Pass_By_Copy.
                                                             (line    6)
* Calendar <1>:                          GNAT.Calendar.Time_IO (g-catiio.ads).
                                                             (line    6)
* Calendar:                              GNAT.Calendar (g-calend.ads).
                                                             (line    6)
* Casing of External names:              Pragma External_Name_Casing.
                                                             (line    6)
* Casing utilities:                      GNAT.Case_Util (g-casuti.ads).
                                                             (line    6)
* CGI (Common Gateway Interface):        GNAT.CGI (g-cgi.ads).
                                                             (line    6)
* CGI (Common Gateway Interface) cookie support: GNAT.CGI.Cookie (g-cgicoo.ads).
                                                             (line    6)
* CGI (Common Gateway Interface) debugging: GNAT.CGI.Debug (g-cgideb.ads).
                                                             (line    6)
* Character handling (GNAT.Case_Util):   GNAT.Case_Util (g-casuti.ads).
                                                             (line    6)
* Character Sets:                        Implementation Advice.
                                                             (line  122)
* Checks, suppression of:                Implementation Advice.
                                                             (line  258)
* Child Units:                           Implementation Advice.
                                                             (line   37)
* COBOL support:                         Implementation Advice.
                                                             (line 1105)
* COBOL, interfacing with:               Implementation Advice.
                                                             (line  837)
* Code_Address:                          Code_Address.       (line    6)
* Command line:                          GNAT.Command_Line (g-comlin.ads).
                                                             (line    6)
* Command line, argument removal:        Ada.Command_Line.Remove (a-colire.ads).
                                                             (line    6)
* Comment:                               Pragma Comment.     (line    6)
* Common_Object:                         Pragma Common_Object.
                                                             (line    6)
* Compile_Time_Warning:                  Pragma Compile_Time_Warning.
                                                             (line    6)
* Compiler Version:                      GNAT.Compiler_Version (g-comver.ads).
                                                             (line    6)
* Complex arithmetic accuracy:           Implementation Advice.
                                                             (line 1219)
* Complex elementary functions:          Implementation Advice.
                                                             (line 1191)
* Complex types:                         Implementation Advice.
                                                             (line 1141)
* Complex_Representation:                Pragma Complex_Representation.
                                                             (line    6)
* Component Clause:                      Record Representation Clauses.
                                                             (line   11)
* Component_Alignment:                   Pragma Component_Alignment.
                                                             (line    6)
* Component_Size:                        Pragma Component_Alignment.
                                                             (line   21)
* Component_Size Clause:                 Component_Size Clauses.
                                                             (line    6)
* Component_Size clauses:                Implementation Advice.
                                                             (line  452)
* Component_Size_4:                      Pragma Component_Alignment.
                                                             (line   30)
* Convention, effect on representation:  Effect of Convention on Representation.
                                                             (line    6)
* Convention_Identifier:                 Pragma Convention_Identifier.
                                                             (line    6)
* Conventions, synonyms:                 Pragma Convention_Identifier.
                                                             (line    6)
* Conventions, typographical:            Conventions.        (line    6)
* Cookie support in CGI:                 GNAT.CGI.Cookie (g-cgicoo.ads).
                                                             (line    6)
* CPP_Class:                             Pragma CPP_Class.   (line    6)
* CPP_Constructor:                       Pragma CPP_Constructor.
                                                             (line    6)
* CPP_Virtual:                           Pragma CPP_Virtual. (line    6)
* CPP_Vtable:                            Pragma CPP_Vtable.  (line    6)
* CRC32:                                 GNAT.CRC32 (g-crc32.ads).
                                                             (line    6)
* Current exception:                     GNAT.Current_Exception (g-curexc.ads).
                                                             (line    6)
* Cyclic Redundancy Check:               GNAT.CRC32 (g-crc32.ads).
                                                             (line    6)
* Debug:                                 Pragma Debug.       (line    6)
* Debug pools:                           GNAT.Debug_Pools (g-debpoo.ads).
                                                             (line    6)
* Debug_Policy:                          Pragma Debug_Policy.
                                                             (line    6)
* Debugging <1>:                         GNAT.Debug_Pools (g-debpoo.ads).
                                                             (line    6)
* Debugging <2>:                         GNAT.Exception_Traces (g-exctra.ads).
                                                             (line    6)
* Debugging:                             GNAT.Debug_Utilities (g-debuti.ads).
                                                             (line    6)
* debugging with Initialize_Scalars:     Pragma Initialize_Scalars.
                                                             (line    6)
* Dec Ada 83:                            Pragma Extend_System.
                                                             (line    6)
* Dec Ada 83 casing compatibility:       Pragma External_Name_Casing.
                                                             (line    6)
* Decimal radix support:                 Implementation Advice.
                                                             (line 1118)
* Default_Bit_Order:                     Default_Bit_Order.  (line    6)
* Deferring aborts:                      Pragma Abort_Defer. (line    6)
* Detect_Blocking:                       Pragma Detect_Blocking.
                                                             (line    6)
* Directory operations:                  GNAT.Directory_Operations (g-dirope.ads).
                                                             (line    6)
* Discriminants, testing for:            Has_Discriminants.  (line    6)
* Distribution Systems Annex:            GNAT Implementation of Shared Passive Packages.
                                                             (line   10)
* Dump Memory:                           GNAT.Memory_Dump (g-memdum.ads).
                                                             (line    6)
* Duration'Small:                        Implementation Advice.
                                                             (line  209)
* Elab_Body:                             Elab_Body.          (line    6)
* Elab_Spec:                             Elab_Spec.          (line    6)
* Elaborated:                            Elaborated.         (line    6)
* Elaboration control:                   Pragma Elaboration_Checks.
                                                             (line    6)
* Elaboration_Checks:                    Pragma Elaboration_Checks.
                                                             (line    6)
* Eliminate:                             Pragma Eliminate.   (line    6)
* Elimination of unused subprograms:     Pragma Eliminate.   (line    6)
* Emax:                                  Emax.               (line    6)
* Enclosing_Entity:                      Enclosing_Entity.   (line    6)
* Entry queuing policies:                Implementation Advice.
                                                             (line 1033)
* Enum_Rep:                              Enum_Rep.           (line    6)
* Enumeration representation clauses:    Implementation Advice.
                                                             (line  473)
* Enumeration values:                    Implementation Advice.
                                                             (line  165)
* Environment entries:                   Ada.Command_Line.Environment (a-colien.ads).
                                                             (line    6)
* Epsilon:                               Epsilon.            (line    6)
* Error detection:                       Implementation Advice.
                                                             (line   28)
* Exception actions:                     GNAT.Exception_Actions (g-excact.ads).
                                                             (line    6)
* Exception information:                 Implementation Advice.
                                                             (line  238)
* Exception retrieval:                   GNAT.Current_Exception (g-curexc.ads).
                                                             (line    6)
* Exception traces:                      GNAT.Exception_Traces (g-exctra.ads).
                                                             (line    6)
* Exception, obtaining most recent:      GNAT.Most_Recent_Exception (g-moreex.ads).
                                                             (line    6)
* Exception_Information':                Exception_Information.
                                                             (line    6)
* Exception_Message:                     Exception_Message.  (line    6)
* Exception_Name:                        Exception_Name.     (line    6)
* Exceptions, Pure:                      GNAT.Exceptions (g-except.ads).
                                                             (line    6)
* Export <1>:                            Address Clauses.    (line  109)
* Export:                                Implementation Advice.
                                                             (line  730)
* Export_Exception:                      Pragma Export_Exception.
                                                             (line    6)
* Export_Function:                       Pragma Export_Function.
                                                             (line    6)
* Export_Object:                         Pragma Export_Object.
                                                             (line    6)
* Export_Procedure:                      Pragma Export_Procedure.
                                                             (line    6)
* Export_Value:                          Pragma Export_Value.
                                                             (line    6)
* Export_Valued_Procedure:               Pragma Export_Valued_Procedure.
                                                             (line    6)
* Extend_System:                         Pragma Extend_System.
                                                             (line    6)
* External:                              Pragma External.    (line    6)
* External Names, casing:                Pragma External_Name_Casing.
                                                             (line    6)
* External_Name_Casing:                  Pragma External_Name_Casing.
                                                             (line    6)
* FDL, GNU Free Documentation License:   GNU Free Documentation License.
                                                             (line    6)
* File:                                  File.               (line    6)
* File locking:                          GNAT.Lock_Files (g-locfil.ads).
                                                             (line    6)
* Finalize_Storage_Only:                 Pragma Finalize_Storage_Only.
                                                             (line    6)
* Fixed_Value:                           Fixed_Value.        (line    6)
* Float types:                           Implementation Advice.
                                                             (line  177)
* Float_Representation:                  Pragma Float_Representation.
                                                             (line    6)
* Floating-Point Processor:              GNAT.Float_Control (g-flocon.ads).
                                                             (line    6)
* Foreign threads:                       GNAT.Threads (g-thread.ads).
                                                             (line    6)
* Forking a new process:                 Mapping Ada Tasks onto the Underlying Kernel Threads.
                                                             (line   53)
* Fortran, interfacing with:             Implementation Advice.
                                                             (line  861)
* Get_Immediate <1>:                     Implementation Advice.
                                                             (line  713)
* Get_Immediate:                         Get_Immediate.      (line    6)
* Get_Immediate, VxWorks:                Interfaces.VxWorks.IO (i-vxwoio.ads).
                                                             (line    6)
* GNAT.Array_Split (g-arrspl.ads):       GNAT.Array_Split (g-arrspl.ads).
                                                             (line    6)
* GNAT.AWK (g-awk.ads):                  GNAT.AWK (g-awk.ads).
                                                             (line    6)
* GNAT.Bounded_Buffers (g-boubuf.ads):   GNAT.Bounded_Buffers (g-boubuf.ads).
                                                             (line    6)
* GNAT.Bounded_Mailboxes (g-boumai.ads): GNAT.Bounded_Mailboxes (g-boumai.ads).
                                                             (line    6)
* GNAT.Bubble_Sort (g-bubsor.ads):       GNAT.Bubble_Sort (g-bubsor.ads).
                                                             (line    6)
* GNAT.Bubble_Sort_A (g-busora.ads):     GNAT.Bubble_Sort_A (g-busora.ads).
                                                             (line    6)
* GNAT.Bubble_Sort_G (g-busorg.ads):     GNAT.Bubble_Sort_G (g-busorg.ads).
                                                             (line    6)
* GNAT.Calendar (g-calend.ads):          GNAT.Calendar (g-calend.ads).
                                                             (line    6)
* GNAT.Calendar.Time_IO (g-catiio.ads):  GNAT.Calendar.Time_IO (g-catiio.ads).
                                                             (line    6)
* GNAT.Case_Util (g-casuti.ads):         GNAT.Case_Util (g-casuti.ads).
                                                             (line    6)
* GNAT.CGI (g-cgi.ads):                  GNAT.CGI (g-cgi.ads).
                                                             (line    6)
* GNAT.CGI.Cookie (g-cgicoo.ads):        GNAT.CGI.Cookie (g-cgicoo.ads).
                                                             (line    6)
* GNAT.CGI.Debug (g-cgideb.ads):         GNAT.CGI.Debug (g-cgideb.ads).
                                                             (line    6)
* GNAT.Command_Line (g-comlin.ads):      GNAT.Command_Line (g-comlin.ads).
                                                             (line    6)
* GNAT.Compiler_Version (g-comver.ads):  GNAT.Compiler_Version (g-comver.ads).
                                                             (line    6)
* GNAT.CRC32 (g-crc32.ads):              GNAT.CRC32 (g-crc32.ads).
                                                             (line    6)
* GNAT.Ctrl_C (g-ctrl_c.ads):            GNAT.Ctrl_C (g-ctrl_c.ads).
                                                             (line    6)
* GNAT.Current_Exception (g-curexc.ads): GNAT.Current_Exception (g-curexc.ads).
                                                             (line    6)
* GNAT.Debug_Pools (g-debpoo.ads):       GNAT.Debug_Pools (g-debpoo.ads).
                                                             (line    6)
* GNAT.Debug_Utilities (g-debuti.ads):   GNAT.Debug_Utilities (g-debuti.ads).
                                                             (line    6)
* GNAT.Directory_Operations (g-dirope.ads): GNAT.Directory_Operations (g-dirope.ads).
                                                             (line    6)
* GNAT.Dynamic_HTables (g-dynhta.ads):   GNAT.Dynamic_HTables (g-dynhta.ads).
                                                             (line    6)
* GNAT.Dynamic_Tables (g-dyntab.ads):    GNAT.Dynamic_Tables (g-dyntab.ads).
                                                             (line    6)
* GNAT.Exception_Actions (g-excact.ads): GNAT.Exception_Actions (g-excact.ads).
                                                             (line    6)
* GNAT.Exception_Traces (g-exctra.ads):  GNAT.Exception_Traces (g-exctra.ads).
                                                             (line    6)
* GNAT.Exceptions (g-expect.ads):        GNAT.Exceptions (g-except.ads).
                                                             (line    6)
* GNAT.Expect (g-expect.ads):            GNAT.Expect (g-expect.ads).
                                                             (line    6)
* GNAT.Float_Control (g-flocon.ads):     GNAT.Float_Control (g-flocon.ads).
                                                             (line    6)
* GNAT.Heap_Sort (g-heasor.ads):         GNAT.Heap_Sort (g-heasor.ads).
                                                             (line    6)
* GNAT.Heap_Sort_A (g-hesora.ads):       GNAT.Heap_Sort_A (g-hesora.ads).
                                                             (line    6)
* GNAT.Heap_Sort_G (g-hesorg.ads):       GNAT.Heap_Sort_G (g-hesorg.ads).
                                                             (line    6)
* GNAT.HTable (g-htable.ads):            GNAT.HTable (g-htable.ads).
                                                             (line    6)
* GNAT.IO (g-io.ads):                    GNAT.IO (g-io.ads). (line    6)
* GNAT.IO_Aux (g-io_aux.ads):            GNAT.IO_Aux (g-io_aux.ads).
                                                             (line    6)
* GNAT.Lock_Files (g-locfil.ads):        GNAT.Lock_Files (g-locfil.ads).
                                                             (line    6)
* GNAT.MD5 (g-md5.ads):                  GNAT.MD5 (g-md5.ads).
                                                             (line    6)
* GNAT.Memory_Dump (g-memdum.ads):       GNAT.Memory_Dump (g-memdum.ads).
                                                             (line    6)
* GNAT.Most_Recent_Exception (g-moreex.ads): GNAT.Most_Recent_Exception (g-moreex.ads).
                                                             (line    6)
* GNAT.OS_Lib (g-os_lib.ads):            GNAT.OS_Lib (g-os_lib.ads).
                                                             (line    6)
* GNAT.Perfect_Hash_Generators (g-pehage.ads): GNAT.Perfect_Hash_Generators (g-pehage.ads).
                                                             (line    6)
* GNAT.Regexp (g-regexp.ads):            GNAT.Regexp (g-regexp.ads).
                                                             (line    6)
* GNAT.Registry (g-regist.ads):          GNAT.Registry (g-regist.ads).
                                                             (line    6)
* GNAT.Regpat (g-regpat.ads):            GNAT.Regpat (g-regpat.ads).
                                                             (line    6)
* GNAT.Secondary_Stack_Info (g-sestin.ads): GNAT.Secondary_Stack_Info (g-sestin.ads).
                                                             (line    6)
* GNAT.Semaphores (g-semaph.ads):        GNAT.Semaphores (g-semaph.ads).
                                                             (line    6)
* GNAT.Signals (g-signal.ads):           GNAT.Signals (g-signal.ads).
                                                             (line    6)
* GNAT.Sockets (g-socket.ads):           GNAT.Sockets (g-socket.ads).
                                                             (line    6)
* GNAT.Source_Info (g-souinf.ads):       GNAT.Source_Info (g-souinf.ads).
                                                             (line    6)
* GNAT.Spell_Checker (g-speche.ads):     GNAT.Spell_Checker (g-speche.ads).
                                                             (line    6)
* GNAT.Spitbol (g-spitbo.ads):           GNAT.Spitbol (g-spitbo.ads).
                                                             (line    6)
* GNAT.Spitbol.Patterns (g-spipat.ads):  GNAT.Spitbol.Patterns (g-spipat.ads).
                                                             (line    6)
* GNAT.Spitbol.Table_Boolean (g-sptabo.ads): GNAT.Spitbol.Table_Boolean (g-sptabo.ads).
                                                             (line    6)
* GNAT.Spitbol.Table_Integer (g-sptain.ads): GNAT.Spitbol.Table_Integer (g-sptain.ads).
                                                             (line    6)
* GNAT.Spitbol.Table_VString (g-sptavs.ads): GNAT.Spitbol.Table_VString (g-sptavs.ads).
                                                             (line    6)
* GNAT.String_Split (g-strspl.ads):      GNAT.String_Split (g-strspl.ads).
                                                             (line    6)
* GNAT.Strings (g-string.ads):           GNAT.Strings (g-string.ads).
                                                             (line    6)
* GNAT.Table (g-table.ads):              GNAT.Table (g-table.ads).
                                                             (line    6)
* GNAT.Task_Lock (g-tasloc.ads):         GNAT.Task_Lock (g-tasloc.ads).
                                                             (line    6)
* GNAT.Threads (g-thread.ads):           GNAT.Threads (g-thread.ads).
                                                             (line    6)
* GNAT.Traceback (g-traceb.ads):         GNAT.Traceback (g-traceb.ads).
                                                             (line    6)
* GNAT.Traceback.Symbolic (g-trasym.ads): GNAT.Traceback.Symbolic (g-trasym.ads).
                                                             (line    6)
* GNAT.UTF_32 (g-table.ads):             GNAT.UTF_32 (g-utf_32.ads).
                                                             (line    6)
* GNAT.Wide_String_Split (g-wistsp.ads): GNAT.Wide_String_Split (g-wistsp.ads).
                                                             (line    6)
* GNAT.Wide_Wide_String_Split (g-zistsp.ads): GNAT.Wide_Wide_String_Split (g-zistsp.ads).
                                                             (line    6)
* Has_Access_Values:                     Has_Access_Values.  (line    6)
* Has_Discriminants:                     Has_Discriminants.  (line    6)
* Hash functions:                        GNAT.Perfect_Hash_Generators (g-pehage.ads).
                                                             (line    6)
* Hash tables <1>:                       GNAT.HTable (g-htable.ads).
                                                             (line    6)
* Hash tables:                           GNAT.Dynamic_HTables (g-dynhta.ads).
                                                             (line    6)
* Heap usage, implicit:                  Implementation Advice.
                                                             (line  601)
* IBM Packed Format:                     Interfaces.Packed_Decimal (i-pacdec.ads).
                                                             (line    6)
* Ident:                                 Pragma Ident.       (line    6)
* Image, of an address:                  System.Address_Image (s-addima.ads).
                                                             (line    6)
* Img:                                   Img.                (line    6)
* Implementation-dependent features:     About This Guide.   (line   15)
* Import:                                Address Clauses.    (line  114)
* Import_Exception:                      Pragma Import_Exception.
                                                             (line    6)
* Import_Function:                       Pragma Import_Function.
                                                             (line    6)
* Import_Object:                         Pragma Import_Object.
                                                             (line    6)
* Import_Procedure:                      Pragma Import_Procedure.
                                                             (line    6)
* Import_Valued_Procedure:               Pragma Import_Valued_Procedure.
                                                             (line    6)
* Initialization, suppression of:        Pragma Suppress_Initialization.
                                                             (line    6)
* Initialize_Scalars:                    Pragma Initialize_Scalars.
                                                             (line    6)
* Inline_Always:                         Pragma Inline_Always.
                                                             (line    6)
* Inline_Generic:                        Pragma Inline_Generic.
                                                             (line    6)
* Input/Output facilities <1>:           GNAT.IO (g-io.ads). (line    6)
* Input/Output facilities:               GNAT.IO_Aux (g-io_aux.ads).
                                                             (line    6)
* Integer maps:                          GNAT.Spitbol.Table_Integer (g-sptain.ads).
                                                             (line    6)
* Integer types:                         Implementation Advice.
                                                             (line  142)
* Integer_Value:                         Integer_Value.      (line    6)
* Interface:                             Pragma Interface.   (line    6)
* Interface_Name:                        Pragma Interface_Name.
                                                             (line    6)
* Interfaces:                            Implementation Advice.
                                                             (line  762)
* Interfaces.C.Extensions (i-cexten.ads): Interfaces.C.Extensions (i-cexten.ads).
                                                             (line    6)
* Interfaces.C.Streams (i-cstrea.ads):   Interfaces.C.Streams (i-cstrea.ads).
                                                             (line    6)
* Interfaces.CPP (i-cpp.ads):            Interfaces.CPP (i-cpp.ads).
                                                             (line    6)
* Interfaces.Os2lib (i-os2lib.ads):      Interfaces.Os2lib (i-os2lib.ads).
                                                             (line    6)
* Interfaces.Os2lib.Errors (i-os2err.ads): Interfaces.Os2lib.Errors (i-os2err.ads).
                                                             (line    6)
* Interfaces.Os2lib.Synchronization (i-os2syn.ads): Interfaces.Os2lib.Synchronization (i-os2syn.ads).
                                                             (line    6)
* Interfaces.Os2lib.Threads (i-os2thr.ads): Interfaces.Os2lib.Threads (i-os2thr.ads).
                                                             (line    6)
* Interfaces.Packed_Decimal (i-pacdec.ads): Interfaces.Packed_Decimal (i-pacdec.ads).
                                                             (line    6)
* Interfaces.VxWorks (i-vxwork.ads):     Interfaces.VxWorks (i-vxwork.ads).
                                                             (line    6)
* Interfaces.VxWorks.IO (i-vxwoio.ads):  Interfaces.VxWorks.IO (i-vxwoio.ads).
                                                             (line    6)
* Interfacing to C++:                    Pragma CPP_Virtual. (line    6)
* Interfacing to VxWorks:                Interfaces.VxWorks (i-vxwork.ads).
                                                             (line    6)
* Interfacing to VxWorks' I/O:           Interfaces.VxWorks.IO (i-vxwoio.ads).
                                                             (line    6)
* Interfacing with C++ <1>:              Pragma CPP_Vtable.  (line    6)
* Interfacing with C++ <2>:              Pragma CPP_Constructor.
                                                             (line    6)
* Interfacing with C++:                  Pragma CPP_Class.   (line    6)
* Interfacing, to C++:                   Interfaces.CPP (i-cpp.ads).
                                                             (line    6)
* Interfacing, to OS/2 <1>:              Interfaces.Os2lib.Synchronization (i-os2syn.ads).
                                                             (line    6)
* Interfacing, to OS/2 <2>:              Interfaces.Os2lib (i-os2lib.ads).
                                                             (line    6)
* Interfacing, to OS/2 <3>:              Interfaces.Os2lib.Threads (i-os2thr.ads).
                                                             (line    6)
* Interfacing, to OS/2:                  Interfaces.Os2lib.Errors (i-os2err.ads).
                                                             (line    6)
* Interrupt:                             GNAT.Ctrl_C (g-ctrl_c.ads).
                                                             (line    6)
* Interrupt priority, maximum:           Max_Interrupt_Priority.
                                                             (line    6)
* Interrupt support:                     Implementation Advice.
                                                             (line  954)
* Interrupt_Handler:                     Pragma Interrupt_Handler.
                                                             (line    6)
* Interrupt_State:                       Pragma Interrupt_State.
                                                             (line    6)
* Interrupts:                            Implementation Advice.
                                                             (line  979)
* Intrinsic operator:                    Intrinsic Operators.
                                                             (line    6)
* Intrinsic Subprograms:                 Intrinsic Subprograms.
                                                             (line    6)
* Keep_Names:                            Pragma Keep_Names.  (line    6)
* Large:                                 Large.              (line    6)
* Latin_1 constants for Wide_Character:  Ada.Characters.Wide_Latin_1 (a-cwila1.ads).
                                                             (line    6)
* Latin_1 constants for Wide_Wide_Character: Ada.Characters.Wide_Wide_Latin_1 (a-czila1.ads).
                                                             (line    6)
* Latin_9 constants for Character:       Ada.Characters.Latin_9 (a-chlat9.ads).
                                                             (line    6)
* Latin_9 constants for Wide_Character:  Ada.Characters.Wide_Latin_9 (a-cwila9.ads).
                                                             (line    6)
* Latin_9 constants for Wide_Wide_Character: Ada.Characters.Wide_Wide_Latin_9 (a-czila9.ads).
                                                             (line    6)
* License:                               Pragma License.     (line    6)
* License checking:                      Pragma License.     (line    6)
* Line:                                  Line.               (line    6)
* Link_With:                             Pragma Link_With.   (line    6)
* Linker_Alias:                          Pragma Linker_Alias.
                                                             (line    6)
* Linker_Constructor:                    Pragma Linker_Constructor.
                                                             (line    6)
* Linker_Destructor:                     Pragma Linker_Destructor.
                                                             (line    6)
* Linker_Section:                        Pragma Linker_Section.
                                                             (line    6)
* Little endian:                         Default_Bit_Order.  (line    6)
* Locking:                               GNAT.Task_Lock (g-tasloc.ads).
                                                             (line    6)
* Locking Policies:                      Implementation Advice.
                                                             (line 1024)
* Locking using files:                   GNAT.Lock_Files (g-locfil.ads).
                                                             (line    6)
* Long_Float:                            Pragma Long_Float.  (line    6)
* Machine operations:                    Implementation Advice.
                                                             (line  893)
* Machine_Attribute:                     Pragma Machine_Attribute.
                                                             (line    6)
* Machine_Size:                          Machine_Size.       (line    6)
* Mailboxes:                             GNAT.Bounded_Mailboxes (g-boumai.ads).
                                                             (line    6)
* Main_Storage:                          Pragma Main_Storage.
                                                             (line    6)
* Mantissa:                              Mantissa.           (line    6)
* Maps <1>:                              GNAT.Spitbol.Table_Integer (g-sptain.ads).
                                                             (line    6)
* Maps:                                  GNAT.Spitbol.Table_VString (g-sptavs.ads).
                                                             (line    6)
* Max_Entry_Queue_Length:                Implementation Defined Characteristics.
                                                             (line  443)
* Max_Interrupt_Priority:                Max_Interrupt_Priority.
                                                             (line    6)
* Max_Priority:                          Max_Priority.       (line    6)
* Maximum_Alignment:                     Maximum_Alignment.  (line    6)
* Maximum_Alignment attribute:           Alignment Clauses.  (line   14)
* Mechanism_Code:                        Mechanism_Code.     (line    6)
* Memory allocation:                     System.Memory (s-memory.ads).
                                                             (line    6)
* Memory corruption debugging:           GNAT.Debug_Pools (g-debpoo.ads).
                                                             (line    6)
* Message Digest MD5:                    GNAT.MD5 (g-md5.ads).
                                                             (line    6)
* Multidimensional arrays:               Implementation Advice.
                                                             (line  197)
* Named numbers, representation of:      Universal_Literal_String.
                                                             (line    6)
* No_Calendar:                           Implementation Defined Characteristics.
                                                             (line  451)
* No_Direct_Boolean_Operators:           Implementation Defined Characteristics.
                                                             (line  455)
* No_Dynamic_Attachment:                 Implementation Defined Characteristics.
                                                             (line  462)
* No_Elaboration_Code:                   Implementation Defined Characteristics.
                                                             (line  609)
* No_Entry_Calls_In_Elaboration_Code:    Implementation Defined Characteristics.
                                                             (line  471)
* No_Entry_Queue:                        Implementation Defined Characteristics.
                                                             (line  639)
* No_Enumeration_Maps:                   Implementation Defined Characteristics.
                                                             (line  466)
* No_Exception_Handlers:                 Implementation Defined Characteristics.
                                                             (line  477)
* No_Exception_Streams:                  Implementation Defined Characteristics.
                                                             (line  496)
* No_Implementation_Attributes:          Implementation Defined Characteristics.
                                                             (line  647)
* No_Implementation_Pragmas:             Implementation Defined Characteristics.
                                                             (line  653)
* No_Implementation_Restrictions:        Implementation Defined Characteristics.
                                                             (line  658)
* No_Implicit_Conditionals:              Implementation Defined Characteristics.
                                                             (line  505)
* No_Implicit_Dynamic_Code:              Implementation Defined Characteristics.
                                                             (line  514)
* No_Implicit_Loops:                     Implementation Defined Characteristics.
                                                             (line  523)
* No_Initialize_Scalars:                 Implementation Defined Characteristics.
                                                             (line  529)
* No_Local_Protected_Objects:            Implementation Defined Characteristics.
                                                             (line  536)
* No_Protected_Type_Allocators:          Implementation Defined Characteristics.
                                                             (line  540)
* No_Return:                             Pragma No_Return.   (line    6)
* No_Secondary_Stack:                    Implementation Defined Characteristics.
                                                             (line  544)
* No_Select_Statements:                  Implementation Defined Characteristics.
                                                             (line  550)
* No_Standard_Storage_Pools:             Implementation Defined Characteristics.
                                                             (line  556)
* No_Streams:                            Implementation Defined Characteristics.
                                                             (line  562)
* No_Strict_Aliasing:                    Pragma No_Strict_Aliasing.
                                                             (line    6)
* No_Task_Attributes_Package:            Implementation Defined Characteristics.
                                                             (line  570)
* No_Task_Termination:                   Implementation Defined Characteristics.
                                                             (line  575)
* No_Tasking:                            Implementation Defined Characteristics.
                                                             (line  579)
* No_Wide_Characters:                    Implementation Defined Characteristics.
                                                             (line  586)
* Normalize_Scalars:                     Pragma Normalize_Scalars.
                                                             (line    6)
* Null_Occurrence, testing for:          Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads).
                                                             (line    6)
* Null_Parameter:                        Null_Parameter.     (line    6)
* Numerics:                              Implementation Advice.
                                                             (line 1127)
* Object_Size <1>:                       Value_Size and Object_Size Clauses.
                                                             (line    6)
* Object_Size:                           Object_Size.        (line    6)
* Obsolescent:                           Pragma Obsolescent. (line    6)
* OpenVMS <1>:                           Pragma Import_Function.
                                                             (line   65)
* OpenVMS <2>:                           Pragma Time_Slice.  (line   13)
* OpenVMS <3>:                           Pragma Ast_Entry.   (line    6)
* OpenVMS <4>:                           AST_Entry.          (line    6)
* OpenVMS <5>:                           Pragma Export_Valued_Procedure.
                                                             (line   51)
* OpenVMS <6>:                           Pragma Component_Alignment.
                                                             (line   40)
* OpenVMS <7>:                           Pragma Long_Float.  (line    6)
* OpenVMS <8>:                           Mechanism_Code.     (line   43)
* OpenVMS <9>:                           Pragma Main_Storage.
                                                             (line    6)
* OpenVMS <10>:                          Pragma Export_Procedure.
                                                             (line   46)
* OpenVMS <11>:                          Pragma Float_Representation.
                                                             (line    6)
* OpenVMS <12>:                          Pragma Export_Function.
                                                             (line   62)
* OpenVMS <13>:                          Pragma Ident.       (line   14)
* OpenVMS <14>:                          Pragma Export_Exception.
                                                             (line    6)
* OpenVMS:                               Pragma Import_Exception.
                                                             (line    6)
* Operating System interface:            GNAT.OS_Lib (g-os_lib.ads).
                                                             (line    6)
* Operations, on Address:                Implementation Advice.
                                                             (line  559)
* ordering, of bits:                     Bit_Order Clauses.  (line    6)
* ordering, of bytes:                    Effect of Bit_Order on Byte Ordering.
                                                             (line    6)
* OS/2 Error codes:                      Interfaces.Os2lib.Errors (i-os2err.ads).
                                                             (line    6)
* OS/2 interfacing <1>:                  Interfaces.Os2lib.Errors (i-os2err.ads).
                                                             (line    6)
* OS/2 interfacing:                      Interfaces.Os2lib (i-os2lib.ads).
                                                             (line    6)
* OS/2 synchronization primitives:       Interfaces.Os2lib.Synchronization (i-os2syn.ads).
                                                             (line    6)
* OS/2 thread interfacing:               Interfaces.Os2lib.Threads (i-os2thr.ads).
                                                             (line    6)
* Overlaying of objects:                 Address Clauses.    (line  161)
* Package Interfaces:                    Implementation Advice.
                                                             (line  762)
* Package Interrupts:                    Implementation Advice.
                                                             (line  979)
* Package Task_Attributes:               Implementation Advice.
                                                             (line 1010)
* Packed Decimal:                        Interfaces.Packed_Decimal (i-pacdec.ads).
                                                             (line    6)
* Packed types:                          Implementation Advice.
                                                             (line  302)
* Parameters, passing mechanism:         Mechanism_Code.     (line    6)
* Parameters, when passed by reference:  Passed_By_Reference.
                                                             (line    6)
* Parsing <1>:                           GNAT.Bounded_Mailboxes (g-boumai.ads).
                                                             (line    6)
* Parsing <2>:                           GNAT.Bounded_Buffers (g-boubuf.ads).
                                                             (line    6)
* Parsing:                               GNAT.AWK (g-awk.ads).
                                                             (line    6)
* Partition communication subsystem:     Implementation Advice.
                                                             (line 1088)
* Partition interfacing functions:       System.Partition_Interface (s-parint.ads).
                                                             (line    6)
* Passed_By_Reference:                   Passed_By_Reference.
                                                             (line    6)
* Passing by copy:                       Pragma C_Pass_By_Copy.
                                                             (line    6)
* Passing by descriptor <1>:             Pragma Export_Function.
                                                             (line   62)
* Passing by descriptor <2>:             Pragma Export_Procedure.
                                                             (line   46)
* Passing by descriptor <3>:             Pragma Export_Valued_Procedure.
                                                             (line   51)
* Passing by descriptor:                 Pragma Import_Function.
                                                             (line   65)
* Passive:                               Pragma Passive.     (line    6)
* Pattern matching <1>:                  GNAT.Regpat (g-regpat.ads).
                                                             (line    6)
* Pattern matching <2>:                  GNAT.Regexp (g-regexp.ads).
                                                             (line    6)
* Pattern matching:                      GNAT.Spitbol.Patterns (g-spipat.ads).
                                                             (line    6)
* PCS:                                   Implementation Advice.
                                                             (line 1088)
* Persistent_BSS:                        Pragma Persistent_BSS.
                                                             (line    6)
* Polling:                               Pragma Polling.     (line    6)
* Portability:                           About This Guide.   (line   15)
* Pragma Pack (for arrays):              Pragma Pack for Arrays.
                                                             (line    6)
* Pragma Pack (for records):             Pragma Pack for Records.
                                                             (line    6)
* Pragma Pack (for type Natural):        Pragma Pack for Arrays.
                                                             (line   72)
* Pragma Pack warning:                   Pragma Pack for Arrays.
                                                             (line   72)
* pragma Shared_Passive:                 GNAT Implementation of Shared Passive Packages.
                                                             (line    6)
* Pragma, representation:                Representation Clauses and Pragmas.
                                                             (line   25)
* Pragmas:                               Implementation Advice.
                                                             (line   56)
* Pre-elaboration requirements:          Implementation Advice.
                                                             (line  990)
* Preemptive abort:                      Implementation Advice.
                                                             (line 1041)
* Priority, maximum:                     Max_Priority.       (line    6)
* Propagate_Exceptions:                  Pragma Propagate_Exceptions.
                                                             (line    6)
* Protected procedure handlers:          Implementation Advice.
                                                             (line  965)
* Psect_Object:                          Pragma Psect_Object.
                                                             (line    6)
* Pure:                                  Pragma Pure_Function.
                                                             (line   28)
* Pure packages, exceptions:             GNAT.Exceptions (g-except.ads).
                                                             (line    6)
* Pure_Function:                         Pragma Pure_Function.
                                                             (line    6)
* Random number generation:              Implementation Advice.
                                                             (line  694)
* Range_Length:                          Range_Length.       (line    6)
* Ravenscar:                             Pragma Profile (Ravenscar).
                                                             (line    6)
* Read attribute:                        Implementation Advice.
                                                             (line  654)
* Real-Time Systems Annex compliance:    Ensuring Compliance with the Real-Time Annex.
                                                             (line    6)
* Record Representation Clause:          Record Representation Clauses.
                                                             (line    6)
* Record representation clauses:         Implementation Advice.
                                                             (line  485)
* Regular expressions <1>:               GNAT.Regpat (g-regpat.ads).
                                                             (line    6)
* Regular expressions:                   GNAT.Regexp (g-regexp.ads).
                                                             (line    6)
* Removing command line arguments:       Ada.Command_Line.Remove (a-colire.ads).
                                                             (line    6)
* Representation Clause:                 Representation Clauses and Pragmas.
                                                             (line   25)
* Representation Clauses:                Representation Clauses and Pragmas.
                                                             (line    6)
* Representation clauses:                Implementation Advice.
                                                             (line  266)
* Representation clauses, enumeration:   Implementation Advice.
                                                             (line  473)
* Representation clauses, records:       Implementation Advice.
                                                             (line  485)
* Representation of enums:               Enum_Rep.           (line    6)
* Representation of wide characters:     System.Wch_Cnv (s-wchcnv.ads).
                                                             (line    6)
* Representation Pragma:                 Representation Clauses and Pragmas.
                                                             (line   25)
* Representation, determination of:      Determining the Representations chosen by GNAT.
                                                             (line    6)
* Restricted Run Time:                   Pragma Profile (Restricted).
                                                             (line    6)
* Restriction_Warnings:                  Pragma Restriction_Warnings.
                                                             (line    6)
* Restrictions definitions:              System.Rident (s-rident.ads).
                                                             (line    6)
* Return values, passing mechanism:      Mechanism_Code.     (line    6)
* Rotate_Left:                           Rotate_Left.        (line    6)
* Rotate_Right:                          Rotate_Right.       (line    6)
* Run-time restrictions access:          System.Restrictions (s-restri.ads).
                                                             (line    6)
* Safe_Emax:                             Safe_Emax.          (line    6)
* Safe_Large:                            Safe_Large.         (line    6)
* Secondary Stack Info:                  GNAT.Secondary_Stack_Info (g-sestin.ads).
                                                             (line    6)
* Semaphores:                            GNAT.Semaphores (g-semaph.ads).
                                                             (line    6)
* Sets of strings:                       GNAT.Spitbol.Table_Boolean (g-sptabo.ads).
                                                             (line    6)
* Shared passive packages:               GNAT Implementation of Shared Passive Packages.
                                                             (line    6)
* SHARED_MEMORY_DIRECTORY environment variable: GNAT Implementation of Shared Passive Packages.
                                                             (line   34)
* Shift_Left:                            Shift_Left.         (line    6)
* Shift_Right:                           Shift_Right.        (line    6)
* Shift_Right_Arithmetic:                Shift_Right_Arithmetic.
                                                             (line    6)
* Signals:                               GNAT.Signals (g-signal.ads).
                                                             (line    6)
* Simple I/O:                            GNAT.IO (g-io.ads). (line    6)
* Simple_Barriers:                       Implementation Defined Characteristics.
                                                             (line  434)
* Size Clause:                           Size Clauses.       (line    6)
* Size clauses:                          Implementation Advice.
                                                             (line  404)
* Size for biased representation:        Biased Representation.
                                                             (line    6)
* Size of Address:                       Address_Size.       (line    6)
* Size, of objects:                      Value_Size and Object_Size Clauses.
                                                             (line    6)
* Size, setting for not-first subtype:   Value_Size.         (line    6)
* Size, used for objects:                Object_Size.        (line    6)
* Size, VADS compatibility <1>:          Pragma Use_VADS_Size.
                                                             (line    6)
* Size, VADS compatibility:              VADS_Size.          (line    6)
* Size, variant record objects:          Size of Variant Record Objects.
                                                             (line    6)
* Small:                                 Small.              (line    6)
* Sockets:                               GNAT.Sockets (g-socket.ads).
                                                             (line    6)
* Sorting <1>:                           GNAT.Bubble_Sort (g-bubsor.ads).
                                                             (line    6)
* Sorting <2>:                           GNAT.Bubble_Sort_G (g-busorg.ads).
                                                             (line    6)
* Sorting <3>:                           GNAT.Heap_Sort_G (g-hesorg.ads).
                                                             (line    6)
* Sorting <4>:                           GNAT.Heap_Sort (g-heasor.ads).
                                                             (line    6)
* Sorting <5>:                           GNAT.Heap_Sort_A (g-hesora.ads).
                                                             (line    6)
* Sorting:                               GNAT.Bubble_Sort_A (g-busora.ads).
                                                             (line    6)
* Source Information:                    GNAT.Source_Info (g-souinf.ads).
                                                             (line    6)
* Source_File_Name:                      Pragma Source_File_Name.
                                                             (line    6)
* Source_File_Name_Project:              Pragma Source_File_Name_Project.
                                                             (line    6)
* Source_Location:                       Source_Location.    (line    6)
* Source_Reference:                      Pragma Source_Reference.
                                                             (line    6)
* Spawn capability:                      GNAT.OS_Lib (g-os_lib.ads).
                                                             (line    6)
* Spell checking:                        GNAT.Spell_Checker (g-speche.ads).
                                                             (line    6)
* SPITBOL interface:                     GNAT.Spitbol (g-spitbo.ads).
                                                             (line    6)
* SPITBOL pattern matching:              GNAT.Spitbol.Patterns (g-spipat.ads).
                                                             (line    6)
* SPITBOL Tables <1>:                    GNAT.Spitbol.Table_VString (g-sptavs.ads).
                                                             (line    6)
* SPITBOL Tables <2>:                    GNAT.Spitbol.Table_Boolean (g-sptabo.ads).
                                                             (line    6)
* SPITBOL Tables:                        GNAT.Spitbol.Table_Integer (g-sptain.ads).
                                                             (line    6)
* Static_Priorities:                     Implementation Defined Characteristics.
                                                             (line  593)
* Static_Storage_Size:                   Implementation Defined Characteristics.
                                                             (line  598)
* Storage place attributes:              Implementation Advice.
                                                             (line  526)
* Storage_Size Clause:                   Storage_Size Clauses.
                                                             (line    6)
* Storage_Unit <1>:                      Pragma Component_Alignment.
                                                             (line   35)
* Storage_Unit:                          Storage_Unit.       (line    6)
* Stream files:                          Treating Text_IO Files as Streams.
                                                             (line    6)
* Stream oriented attributes:            Implementation Advice.
                                                             (line  638)
* Stream_Convert:                        Pragma Stream_Convert.
                                                             (line    6)
* String maps:                           GNAT.Spitbol.Table_VString (g-sptavs.ads).
                                                             (line    6)
* String splitter:                       GNAT.String_Split (g-strspl.ads).
                                                             (line    6)
* Style_Checks:                          Pragma Style_Checks.
                                                             (line    6)
* Subprogram address:                    Code_Address.       (line    6)
* Subtitle:                              Pragma Subtitle.    (line    6)
* Suppress_All:                          Pragma Suppress_All.
                                                             (line    6)
* Suppress_Exception_Locations:          Pragma Suppress_Exception_Locations.
                                                             (line    6)
* Suppress_Initialization:               Pragma Suppress_Initialization.
                                                             (line    6)
* Suppressing external name <1>:         Pragma Export_Valued_Procedure.
                                                             (line   54)
* Suppressing external name <2>:         Pragma Export_Procedure.
                                                             (line   49)
* Suppressing external name:             Pragma Export_Function.
                                                             (line   65)
* Suppressing initialization:            Pragma Suppress_Initialization.
                                                             (line    6)
* Suppression of checks:                 Implementation Advice.
                                                             (line  258)
* Synchronization, OS/2:                 Interfaces.Os2lib.Synchronization (i-os2syn.ads).
                                                             (line    6)
* system, extending:                     Pragma Extend_System.
                                                             (line    6)
* System.Address_Image (s-addima.ads):   System.Address_Image (s-addima.ads).
                                                             (line    6)
* System.Assertions (s-assert.ads):      System.Assertions (s-assert.ads).
                                                             (line    6)
* System.Memory (s-memory.ads):          System.Memory (s-memory.ads).
                                                             (line    6)
* System.Partition_Interface (s-parint.ads): System.Partition_Interface (s-parint.ads).
                                                             (line    6)
* System.Restrictions (s-restri.ads):    System.Restrictions (s-restri.ads).
                                                             (line    6)
* System.Rident (s-rident.ads):          System.Rident (s-rident.ads).
                                                             (line    6)
* System.Task_Info (s-tasinf.ads):       System.Task_Info (s-tasinf.ads).
                                                             (line    6)
* System.Wch_Cnv (s-wchcnv.ads):         System.Wch_Cnv (s-wchcnv.ads).
                                                             (line    6)
* System.Wch_Con (s-wchcon.ads):         System.Wch_Con (s-wchcon.ads).
                                                             (line    6)
* Table implementation <1>:              GNAT.Table (g-table.ads).
                                                             (line    6)
* Table implementation:                  GNAT.Dynamic_Tables (g-dyntab.ads).
                                                             (line    6)
* Target_Name:                           Target_Name.        (line    6)
* Task locking:                          GNAT.Task_Lock (g-tasloc.ads).
                                                             (line    6)
* Task synchronization:                  GNAT.Task_Lock (g-tasloc.ads).
                                                             (line    6)
* Task_Attributes:                       Implementation Advice.
                                                             (line 1010)
* Task_Info:                             Pragma Task_Info.   (line    6)
* Task_Info pragma:                      System.Task_Info (s-tasinf.ads).
                                                             (line    6)
* Task_Name:                             Pragma Task_Name.   (line    6)
* Task_Storage:                          Pragma Task_Storage.
                                                             (line    6)
* Tasking restrictions:                  Implementation Advice.
                                                             (line 1057)
* Text_IO:                               GNAT.IO_Aux (g-io_aux.ads).
                                                             (line    6)
* Text_IO extensions:                    Text_IO Extensions. (line    6)
* Text_IO for unbounded strings:         Text_IO Facilities for Unbounded Strings.
                                                             (line    6)
* Text_IO, extensions for unbounded strings: Ada.Strings.Unbounded.Text_IO (a-suteio.ads).
                                                             (line    6)
* Text_IO, extensions for unbounded wide strings: Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads).
                                                             (line    6)
* Text_IO, extensions for unbounded wide wide strings: Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads).
                                                             (line    6)
* Thread control, OS/2:                  Interfaces.Os2lib.Threads (i-os2thr.ads).
                                                             (line    6)
* Thread_Body:                           Pragma Thread_Body. (line    6)
* Threads, foreign:                      GNAT.Threads (g-thread.ads).
                                                             (line    6)
* Tick:                                  Tick.               (line    6)
* Time:                                  GNAT.Calendar.Time_IO (g-catiio.ads).
                                                             (line    6)
* Time, monotonic:                       Implementation Advice.
                                                             (line 1068)
* Time_Slice:                            Pragma Time_Slice.  (line    6)
* Title:                                 Pragma Title.       (line    6)
* To_Address <1>:                        To_Address.         (line    6)
* To_Address:                            Address Clauses.    (line   83)
* Trace back facilities <1>:             GNAT.Traceback (g-traceb.ads).
                                                             (line    6)
* Trace back facilities:                 GNAT.Traceback.Symbolic (g-trasym.ads).
                                                             (line    6)
* Traceback for Exception Occurrence:    Ada.Exceptions.Traceback (a-exctra.ads).
                                                             (line    6)
* Type_Class:                            Type_Class.         (line    6)
* Typographical conventions:             Conventions.        (line    6)
* UET_Address:                           UET_Address.        (line    6)
* Unbounded_String, IO support:          Ada.Strings.Unbounded.Text_IO (a-suteio.ads).
                                                             (line    6)
* Unbounded_String, Text_IO operations:  Text_IO Facilities for Unbounded Strings.
                                                             (line    6)
* Unbounded_Wide_String, IO support:     Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads).
                                                             (line    6)
* Unbounded_Wide_Wide_String, IO support: Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads).
                                                             (line    6)
* Unchecked conversion:                  Implementation Advice.
                                                             (line  570)
* Unchecked deallocation:                Implementation Advice.
                                                             (line  631)
* Unchecked_Union:                       Pragma Unchecked_Union.
                                                             (line    6)
* Unconstrained_Array:                   Unconstrained_Array.
                                                             (line    6)
* Unimplemented_Unit:                    Pragma Unimplemented_Unit.
                                                             (line    6)
* Unions in C:                           Pragma Unchecked_Union.
                                                             (line    6)
* Universal_Data:                        Pragma Universal_Data.
                                                             (line    6)
* Universal_Literal_String:              Universal_Literal_String.
                                                             (line    6)
* Unreferenced:                          Pragma Unreferenced.
                                                             (line    6)
* Unreserve_All_Interrupts:              Pragma Unreserve_All_Interrupts.
                                                             (line    6)
* Unrestricted_Access:                   Unrestricted_Access.
                                                             (line    6)
* Unsuppress:                            Pragma Unsuppress.  (line    6)
* Use_VADS_Size:                         Pragma Use_VADS_Size.
                                                             (line    6)
* VADS_Size:                             VADS_Size.          (line    6)
* Validity_Checks:                       Pragma Validity_Checks.
                                                             (line    6)
* Value_Size <1>:                        Value_Size and Object_Size Clauses.
                                                             (line    6)
* Value_Size:                            Value_Size.         (line    6)
* Variant record objects, size:          Size of Variant Record Objects.
                                                             (line    6)
* Version, of compiler:                  GNAT.Compiler_Version (g-comver.ads).
                                                             (line    6)
* Volatile:                              Pragma Volatile.    (line    6)
* VxWorks, Get_Immediate:                Interfaces.VxWorks.IO (i-vxwoio.ads).
                                                             (line    6)
* VxWorks, I/O interfacing:              Interfaces.VxWorks.IO (i-vxwoio.ads).
                                                             (line    6)
* VxWorks, interfacing:                  Interfaces.VxWorks (i-vxwork.ads).
                                                             (line    6)
* Warnings:                              Pragma Warnings.    (line    6)
* Warnings, unreferenced:                Pragma Unreferenced.
                                                             (line    6)
* Wchar_T_Size:                          Wchar_T_Size.       (line    6)
* Weak_External:                         Pragma Weak_External.
                                                             (line    6)
* Wide character codes:                  GNAT.UTF_32 (g-utf_32.ads).
                                                             (line    6)
* Wide Character, Representation:        System.Wch_Cnv (s-wchcnv.ads).
                                                             (line    6)
* Wide String, Conversion:               System.Wch_Cnv (s-wchcnv.ads).
                                                             (line    6)
* Wide_String splitter:                  GNAT.Wide_String_Split (g-wistsp.ads).
                                                             (line    6)
* Wide_Wide_String splitter:             GNAT.Wide_Wide_String_Split (g-zistsp.ads).
                                                             (line    6)
* Windows Registry:                      GNAT.Registry (g-regist.ads).
                                                             (line    6)
* Word_Size:                             Word_Size.          (line    6)
* Write attribute:                       Implementation Advice.
                                                             (line  654)
* XDR representation:                    Implementation Advice.
                                                             (line  654)
* Zero address, passing:                 Null_Parameter.     (line    6)
* Zero Cost Exceptions:                  Pragma Propagate_Exceptions.
                                                             (line    6)



Tag Table:
Node: Top753
Node: About This Guide10183
Node: What This Reference Manual Contains11252
Node: Conventions14052
Node: Related Information14988
Node: Implementation Defined Pragmas16013
Node: Pragma Abort_Defer19515
Node: Pragma Ada_8319986
Node: Pragma Ada_9521188
Node: Pragma Ada_0521814
Node: Pragma Annotate22446
Node: Pragma Assert23294
Node: Pragma Ast_Entry25641
Node: Pragma C_Pass_By_Copy26564
Node: Pragma Comment27841
Node: Pragma Common_Object28478
Node: Pragma Compile_Time_Warning29476
Node: Pragma Complex_Representation30701
Node: Pragma Component_Alignment31609
Node: Pragma Convention_Identifier34570
Node: Pragma CPP_Class35862
Node: Pragma CPP_Constructor37034
Node: Pragma CPP_Virtual39400
Node: Pragma CPP_Vtable40731
Node: Pragma Debug41841
Node: Pragma Debug_Policy42807
Node: Pragma Detect_Blocking43768
Node: Pragma Elaboration_Checks44173
Node: Pragma Eliminate45042
Node: Pragma Export_Exception50314
Node: Pragma Export_Function51250
Node: Pragma Export_Object53905
Node: Pragma Export_Procedure54704
Node: Pragma Export_Value56414
Node: Pragma Export_Valued_Procedure57208
Node: Pragma Extend_System59270
Node: Pragma External61400
Node: Pragma External_Name_Casing62097
Node: Pragma Finalize_Storage_Only65216
Node: Pragma Float_Representation65832
Node: Pragma Ident67358
Node: Pragma Import_Exception68219
Node: Pragma Import_Function69158
Node: Pragma Import_Object72182
Node: Pragma Import_Procedure73013
Node: Pragma Import_Valued_Procedure74284
Node: Pragma Initialize_Scalars76394
Node: Pragma Inline_Always79350
Node: Pragma Inline_Generic79760
Node: Pragma Interface80183
Node: Pragma Interface_Name80935
Node: Pragma Interrupt_Handler81578
Node: Pragma Interrupt_State82406
Node: Pragma Keep_Names85508
Node: Pragma License86225
Node: Pragma Link_With89445
Node: Pragma Linker_Alias90197
Node: Pragma Linker_Constructor91561
Node: Pragma Linker_Destructor92921
Node: Pragma Linker_Section93828
Node: Pragma Long_Float95660
Node: Pragma Machine_Attribute96516
Node: Pragma Main_Storage97315
Node: Pragma No_Return97937
Node: Pragma No_Strict_Aliasing98764
Node: Pragma Normalize_Scalars99551
Node: Pragma Obsolescent102606
Node: Pragma Passive104392
Node: Pragma Persistent_BSS105242
Node: Pragma Polling106557
Node: Pragma Profile (Ravenscar)108427
Node: Pragma Profile (Restricted)113550
Node: Pragma Propagate_Exceptions114559
Node: Pragma Psect_Object116274
Node: Pragma Pure_Function116763
Node: Pragma Restriction_Warnings119158
Node: Pragma Source_File_Name119800
Node: Pragma Source_File_Name_Project122065
Node: Pragma Source_Reference122964
Node: Pragma Stream_Convert123941
Node: Pragma Style_Checks126824
Node: Pragma Subtitle129043
Node: Pragma Suppress_All129372
Node: Pragma Suppress_Exception_Locations129929
Node: Pragma Suppress_Initialization131011
Node: Pragma Task_Info131444
Node: Pragma Task_Name132193
Node: Pragma Task_Storage133892
Node: Pragma Thread_Body134550
Node: Pragma Time_Slice136315
Node: Pragma Title136963
Node: Pragma Unchecked_Union137808
Node: Pragma Unimplemented_Unit140210
Node: Pragma Universal_Data140880
Node: Pragma Unreferenced141948
Node: Pragma Unreserve_All_Interrupts143535
Node: Pragma Unsuppress145155
Node: Pragma Use_VADS_Size145922
Node: Pragma Validity_Checks146598
Node: Pragma Volatile148473
Node: Pragma Warnings149061
Node: Pragma Weak_External152977
Node: Implementation Defined Attributes154747
Node: Abort_Signal156664
Node: Address_Size157167
Node: Asm_Input157626
Node: Asm_Output158334
Node: AST_Entry159186
Node: Bit159730
Node: Bit_Position160886
Node: Code_Address161383
Node: Default_Bit_Order162813
Node: Elaborated163255
Node: Elab_Body163888
Node: Elab_Spec164524
Node: Emax165163
Node: Enum_Rep165443
Node: Epsilon166836
Node: Fixed_Value167130
Node: Has_Access_Values167908
Node: Has_Discriminants168534
Node: Img169067
Node: Integer_Value169556
Node: Large170378
Node: Machine_Size170670
Node: Mantissa170950
Node: Max_Interrupt_Priority171263
Node: Max_Priority171581
Node: Maximum_Alignment171867
Node: Mechanism_Code172305
Node: Null_Parameter173328
Node: Object_Size174143
Node: Passed_By_Reference175854
Node: Range_Length176346
Node: Safe_Emax176814
Node: Safe_Large177118
Node: Small177418
Node: Storage_Unit177851
Node: Target_Name178114
Node: Tick178566
Node: To_Address178794
Node: Type_Class179471
Node: UET_Address180420
Node: Unconstrained_Array180972
Node: Universal_Literal_String181487
Node: Unrestricted_Access182227
Node: VADS_Size183544
Node: Value_Size184262
Node: Wchar_T_Size184585
Node: Word_Size184933
Node: Implementation Advice185160
Node: Implementation Defined Characteristics229858
Node: Intrinsic Subprograms276639
Node: Intrinsic Operators277775
Node: Enclosing_Entity278868
Node: Exception_Information279414
Node: Exception_Message279967
Node: Exception_Name280492
Node: File280975
Node: Line281398
Node: Rotate_Left281827
Node: Rotate_Right282714
Node: Shift_Left283013
Node: Shift_Right283308
Node: Shift_Right_Arithmetic283616
Node: Source_Location283962
Node: Representation Clauses and Pragmas284430
Node: Alignment Clauses285632
Node: Size Clauses289338
Node: Storage_Size Clauses292145
Node: Size of Variant Record Objects294765
Node: Biased Representation298034
Node: Value_Size and Object_Size Clauses299258
Node: Component_Size Clauses306647
Node: Bit_Order Clauses307990
Node: Effect of Bit_Order on Byte Ordering311640
Node: Pragma Pack for Arrays321576
Node: Pragma Pack for Records325848
Node: Record Representation Clauses328273
Node: Enumeration Clauses331616
Node: Address Clauses333210
Node: Effect of Convention on Representation341326
Node: Determining the Representations chosen by GNAT344067
Node: Standard Library Routines348817
Node: The Implementation of Standard I/O368950
Node: Standard I/O Packages371077
Node: FORM Strings372512
Node: Direct_IO373056
Node: Sequential_IO373945
Node: Text_IO375888
Node: Text_IO Stream Pointer Positioning378421
Node: Text_IO Reading and Writing Non-Regular Files379967
Node: Get_Immediate381847
Node: Treating Text_IO Files as Streams382692
Node: Text_IO Extensions383369
Node: Text_IO Facilities for Unbounded Strings384135
Node: Wide_Text_IO385765
Node: Wide_Text_IO Stream Pointer Positioning390633
Node: Wide_Text_IO Reading and Writing Non-Regular Files391671
Node: Wide_Wide_Text_IO392218
Node: Wide_Wide_Text_IO Stream Pointer Positioning395623
Node: Wide_Wide_Text_IO Reading and Writing Non-Regular Files396708
Node: Stream_IO397270
Node: Shared Files397904
Node: Open Modes400745
Node: Operations on C Streams402069
Node: Interfacing to C Streams409036
Node: The GNAT Library412521
Node: Ada.Characters.Latin_9 (a-chlat9.ads)418383
Node: Ada.Characters.Wide_Latin_1 (a-cwila1.ads)418909
Node: Ada.Characters.Wide_Latin_9 (a-cwila9.ads)419526
Node: Ada.Characters.Wide_Wide_Latin_1 (a-czila1.ads)420155
Node: Ada.Characters.Wide_Wide_Latin_9 (a-czila9.ads)420802
Node: Ada.Command_Line.Remove (a-colire.ads)421447
Node: Ada.Command_Line.Environment (a-colien.ads)421989
Node: Ada.Direct_IO.C_Streams (a-diocst.ads)422416
Node: Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads)422952
Node: Ada.Exceptions.Traceback (a-exctra.ads)423397
Node: Ada.Sequential_IO.C_Streams (a-siocst.ads)423829
Node: Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads)424377
Node: Ada.Strings.Unbounded.Text_IO (a-suteio.ads)424934
Node: Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads)425405
Node: Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads)425924
Node: Ada.Text_IO.C_Streams (a-tiocst.ads)426465
Node: Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads)427009
Node: Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads)427550
Node: GNAT.Array_Split (g-arrspl.ads)428101
Node: GNAT.AWK (g-awk.ads)428515
Node: GNAT.Bounded_Buffers (g-boubuf.ads)428958
Node: GNAT.Bounded_Mailboxes (g-boumai.ads)429380
Node: GNAT.Bubble_Sort (g-bubsor.ads)429729
Node: GNAT.Bubble_Sort_A (g-busora.ads)430164
Node: GNAT.Bubble_Sort_G (g-busorg.ads)430696
Node: GNAT.Calendar (g-calend.ads)431192
Node: GNAT.Calendar.Time_IO (g-catiio.ads)431667
Node: GNAT.CRC32 (g-crc32.ads)431920
Node: GNAT.Case_Util (g-casuti.ads)432538
Node: GNAT.CGI (g-cgi.ads)432912
Node: GNAT.CGI.Cookie (g-cgicoo.ads)433436
Node: GNAT.CGI.Debug (g-cgideb.ads)433875
Node: GNAT.Command_Line (g-comlin.ads)434210
Node: GNAT.Compiler_Version (g-comver.ads)434654
Node: GNAT.Ctrl_C (g-ctrl_c.ads)435213
Node: GNAT.Current_Exception (g-curexc.ads)435520
Node: GNAT.Debug_Pools (g-debpoo.ads)436081
Node: GNAT.Debug_Utilities (g-debuti.ads)436510
Node: GNAT.Directory_Operations (g-dirope.ads)436960
Node: GNAT.Dynamic_HTables (g-dynhta.ads)437402
Node: GNAT.Dynamic_Tables (g-dyntab.ads)438146
Node: GNAT.Exception_Actions (g-excact.ads)438789
Node: GNAT.Exception_Traces (g-exctra.ads)439268
Node: GNAT.Exceptions (g-except.ads)439624
Node: GNAT.Expect (g-expect.ads)440258
Node: GNAT.Float_Control (g-flocon.ads)440955
Node: GNAT.Heap_Sort (g-heasor.ads)441484
Node: GNAT.Heap_Sort_A (g-hesora.ads)442016
Node: GNAT.Heap_Sort_G (g-hesorg.ads)442657
Node: GNAT.HTable (g-htable.ads)443141
Node: GNAT.IO (g-io.ads)443553
Node: GNAT.IO_Aux (g-io_aux.ads)443994
Node: GNAT.Lock_Files (g-locfil.ads)444356
Node: GNAT.MD5 (g-md5.ads)444699
Node: GNAT.Memory_Dump (g-memdum.ads)444984
Node: GNAT.Most_Recent_Exception (g-moreex.ads)445372
Node: GNAT.OS_Lib (g-os_lib.ads)445832
Node: GNAT.Perfect_Hash_Generators (g-pehage.ads)446335
Node: GNAT.Regexp (g-regexp.ads)447137
Node: GNAT.Registry (g-regist.ads)447647
Node: GNAT.Regpat (g-regpat.ads)448143
Node: GNAT.Secondary_Stack_Info (g-sestin.ads)448588
Node: GNAT.Semaphores (g-semaph.ads)448949
Node: GNAT.Signals (g-signal.ads)449271
Node: GNAT.Sockets (g-socket.ads)449590
Node: GNAT.Source_Info (g-souinf.ads)450114
Node: GNAT.Spell_Checker (g-speche.ads)450496
Node: GNAT.Spitbol.Patterns (g-spipat.ads)450862
Node: GNAT.Spitbol (g-spitbo.ads)451425
Node: GNAT.Spitbol.Table_Boolean (g-sptabo.ads)451999
Node: GNAT.Spitbol.Table_Integer (g-sptain.ads)452430
Node: GNAT.Spitbol.Table_VString (g-sptavs.ads)452888
Node: GNAT.Strings (g-string.ads)453340
Node: GNAT.String_Split (g-strspl.ads)453714
Node: GNAT.UTF_32 (g-utf_32.ads)454173
Node: GNAT.Table (g-table.ads)454864
Node: GNAT.Task_Lock (g-tasloc.ads)455478
Node: GNAT.Threads (g-thread.ads)455900
Node: GNAT.Traceback (g-traceb.ads)456502
Node: GNAT.Traceback.Symbolic (g-trasym.ads)456858
Node: GNAT.Wide_String_Split (g-wistsp.ads)457235
Node: GNAT.Wide_Wide_String_Split (g-zistsp.ads)457746
Node: Interfaces.C.Extensions (i-cexten.ads)458277
Node: Interfaces.C.Streams (i-cstrea.ads)458708
Node: Interfaces.CPP (i-cpp.ads)459049
Node: Interfaces.Os2lib (i-os2lib.ads)459462
Node: Interfaces.Os2lib.Errors (i-os2err.ads)459866
Node: Interfaces.Os2lib.Synchronization (i-os2syn.ads)460216
Node: Interfaces.Os2lib.Threads (i-os2thr.ads)460641
Node: Interfaces.Packed_Decimal (i-pacdec.ads)461042
Node: Interfaces.VxWorks (i-vxwork.ads)461466
Node: Interfaces.VxWorks.IO (i-vxwoio.ads)461873
Node: System.Address_Image (s-addima.ads)462360
Node: System.Assertions (s-assert.ads)462755
Node: System.Memory (s-memory.ads)463176
Node: System.Partition_Interface (s-parint.ads)463940
Node: System.Restrictions (s-restri.ads)464360
Node: System.Rident (s-rident.ads)464960
Node: System.Task_Info (s-tasinf.ads)465508
Node: System.Wch_Cnv (s-wchcnv.ads)465852
Node: System.Wch_Con (s-wchcon.ads)466337
Node: Interfacing to Other Languages466730
Node: Interfacing to C467215
Node: Interfacing to C++469145
Node: Interfacing to COBOL470506
Node: Interfacing to Fortran470799
Node: Interfacing to non-GNAT Ada code471277
Node: Specialized Needs Annexes472419
Node: Implementation of Specific Ada Features473532
Node: Machine Code Insertions474132
Node: GNAT Implementation of Tasking481150
Node: Mapping Ada Tasks onto the Underlying Kernel Threads481725
Node: Ensuring Compliance with the Real-Time Annex484070
Node: GNAT Implementation of Shared Passive Packages486166
Node: Code Generation for Array Aggregates489568
Node: Static constant aggregates with static bounds491245
Node: Constant aggregates with an unconstrained nominal types492840
Node: Aggregates with static bounds493571
Node: Aggregates with non-static bounds494460
Node: Aggregates in assignment statements495060
Node: The Size of Discriminated Records with Default Discriminants496493
Node: Strict Conformance to the Ada 95 Reference Manual499640
Node: Project File Reference501419
Node: Reserved Words502274
Node: Lexical Elements502639
Node: Declarations503076
Node: Empty declarations503777
Node: Typed string declarations504090
Node: Variables504790
Node: Expressions505578
Node: Attributes506678
Node: Project Attributes508324
Node: Attribute References516401
Node: External Values517081
Node: Case Construction517799
Node: Packages518686
Node: Package Renamings537314
Node: Projects538131
Node: Project Extensions539960
Node: Project File Elaboration540637
Node: Obsolescent Features541150
Node: pragma No_Run_Time541641
Node: pragma Ravenscar542264
Node: pragma Restricted_Run_Time542607
Node: GNU Free Documentation License543007
Node: Index565429

End Tag Table
