@node unigbrk.h
@chapter Grapheme cluster breaks in strings @code{<unigbrk.h>}

@cindex grapheme cluster breaks
@cindex grapheme cluster boundaries
@cindex breaks, grapheme cluster
@cindex boundaries, between grapheme clusters
This include file declares functions for determining where in a string
``grapheme clusters'' start and end.  A ``grapheme cluster'' is an
approximation to a user-perceived character, which sometimes
corresponds to multiple Unicode characters.  Editing operations such as
mouse selection, cursor movement, and backspacing often operate on
grapheme clusters as units, not on individual characters.

Some grapheme clusters are built from a base character and a combining
character.  The letter @samp{@'e},
for example, is most commonly represented in Unicode as a single
character U+00E8 @sc{LATIN SMALL LETTER E WITH ACUTE}.  It is,
however, equally valid to use the pair of characters U+0065 @sc{LATIN
SMALL LETTER E} followed by U+0301 @sc{COMBINING ACUTE ACCENT}.  Since
the user would perceive this pair of characters as a single character,
they would be grouped into a single grapheme cluster.

But there are also grapheme clusters that consist of several base characters.
For example, a Devanagari letter and a Devanagari vowel sign that follows it
may form a grapheme cluster.  Similarly, some pairs of Thai characters and
Hangul syllables (formed by two or three Hangul characters) are grapheme
clusters.

@menu
* Grapheme cluster breaks in a string::
* Grapheme cluster break property::
@end menu

@node Grapheme cluster breaks in a string
@section Grapheme cluster breaks in a string

The following functions find a single boundary between grapheme
clusters in a string.

@deftypefun void u8_grapheme_next (const uint8_t *@var{s}, const uint8_t *@var{end})
@deftypefunx void u16_grapheme_next (const uint16_t *@var{s}, const uint16_t *@var{end})
@deftypefunx void u32_grapheme_next (const uint32_t *@var{s}, const uint32_t *@var{end})
Returns the start of the next grapheme cluster following @var{s},
or @var{end} if no grapheme cluster break is encountered before it.
Returns NULL if and only if @code{@var{s} == @var{end}}.

Note that these functions do not handle the case when a character
outside of the range between @var{s} and @var{end} is needed to
determine the boundary.  Use @func{_grapheme_breaks} functions for such
cases.
@end deftypefun

@deftypefun void u8_grapheme_prev (const uint8_t *@var{s}, const uint8_t *@var{start})
@deftypefunx void u16_grapheme_prev (const uint16_t *@var{s}, const uint16_t *@var{start})
@deftypefunx void u32_grapheme_prev (const uint32_t *@var{s}, const uint32_t *@var{start})
Returns the start of the grapheme cluster preceding @var{s}, or
@var{start} if no grapheme cluster break is encountered before it.
Returns NULL if and only if @code{@var{s} == @var{start}}.

Note that these functions do not handle the case when a character
outside of the range between @var{start} and @var{s} is needed to
determine the boundary.  Use @func{_grapheme_breaks} functions for such
cases.
@end deftypefun

The following functions determine all of the grapheme cluster
boundaries in a string.

@deftypefun void u8_grapheme_breaks (const uint8_t *@var{s}, size_t @var{n}, char *@var{p})
@deftypefunx void u16_grapheme_breaks (const uint16_t *@var{s}, size_t @var{n}, char *@var{p})
@deftypefunx void u32_grapheme_breaks (const uint32_t *@var{s}, size_t @var{n}, char *@var{p})
@deftypefunx void ulc_grapheme_breaks (const char *@var{s}, size_t @var{n}, char *@var{p})
@deftypefunx void uc_grapheme_breaks (const ucs_t *@var{s}, size_t @var{n}, char *@var{p})
Determines the grapheme cluster break points in @var{s}, an array of
@var{n} units, and stores the result at @code{@var{p}[0..@var{nx}-1]}.
@table @asis
@item @code{@var{p}[i] = 1}
means that there is a grapheme cluster boundary between
@code{@var{s}[i-1]} and @code{@var{s}[i]}.
@item @code{@var{p}[i] = 0}
means that @code{@var{s}[i-1]} and @code{@var{s}[i]} are part of the
same grapheme cluster.
@end table
@code{@var{p}[0]} is always set to 1, because there is always a
grapheme cluster break at start of text.

In addition to the above variants for UTF-8, UTF-16, and UTF-32 strings,
@code{<unigbrk.h>} provides another variant: @func{uc_grapheme_breaks}.

This is similar to @func{u32_grapheme_breaks}, but it accepts any
characters which may not be represented in UTF-32, such as control
characters.
@end deftypefun

@node Grapheme cluster break property
@section Grapheme cluster break property

This is a more low-level API.  The grapheme cluster break property is a
property defined in Unicode Standard Annex #29, section ``Grapheme Cluster
Boundaries'', see
@url{http://www.unicode.org/reports/tr29/#Grapheme_Cluster_Boundaries}.@texnl{}
It is used for determining the grapheme cluster breaks in a string.

The following are the possible values of the grapheme cluster break
property.  More values may be added in the future.

@deftypevr Constant int GBP_OTHER
@deftypevrx Constant int GBP_CR
@deftypevrx Constant int GBP_LF
@deftypevrx Constant int GBP_CONTROL
@deftypevrx Constant int GBP_EXTEND
@deftypevrx Constant int GBP_PREPEND
@deftypevrx Constant int GBP_SPACINGMARK
@deftypevrx Constant int GBP_L
@deftypevrx Constant int GBP_V
@deftypevrx Constant int GBP_T
@deftypevrx Constant int GBP_LV
@deftypevrx Constant int GBP_LVT
@deftypevrx Constant int GBP_RI
@deftypevrx Constant int GBP_ZWJ
@deftypevrx Constant int GBP_EB
@deftypevrx Constant int GBP_EM
@deftypevrx Constant int GBP_GAZ
@deftypevrx Constant int GBP_EBG
@end deftypevr

The following function looks up the grapheme cluster break property of a
character.

@deftypefun int uc_graphemeclusterbreak_property (ucs4_t @var{uc})
Returns the Grapheme_Cluster_Break property of a Unicode character.
@end deftypefun

The following function determines whether there is a grapheme cluster
break between two Unicode characters.  It is the primitive upon which
the higher-level functions in the previous section are directly based.

@deftypefun bool uc_is_grapheme_break (ucs4_t @var{a}, ucs4_t @var{b})
Returns true if there is an grapheme cluster boundary between Unicode
characters @var{a} and @var{b}.

There is always a grapheme cluster break at the start or end of text.
You can specify zero for @var{a} or @var{b} to indicate start of text or end
of text, respectively.

This implements the extended (not legacy) grapheme cluster rules
described in the Unicode standard, because the standard says that they
are preferred.

Note that this function do not handle the case when three ore more
consecutive characters are needed to determine the boundary.  Use
@func{uc_grapheme_breaks} for such cases.
@end deftypefun
