#compdef coreutils

autoload -U is-at-least

_coreutils() {
    typeset -A opt_args
    typeset -a _arguments_options
    local ret=1

    if is-at-least 5.2; then
        _arguments_options=(-s -S -C)
    else
        _arguments_options=(-s -C)
    fi

    local context curcontext="$curcontext" state line
    _arguments "${_arguments_options[@]}" \
'-h[Print help information]' \
'--help[Print help information]' \
":: :_coreutils_commands" \
"*::: :->coreutils" \
&& ret=0
    case $state in
    (coreutils)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:coreutils-command-$line[1]:"
        case $line[1] in
            (completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(uu_env)
_arguments "${_arguments_options[@]}" \
'-C+[change working directory to DIR]:DIR:_files -/' \
'--chdir=[change working directory to DIR]:DIR:_files -/' \
'*-f+[read and set variables from a ".env"-style configuration file (prior to any unset and/or set)]:PATH:_files' \
'*--file=[read and set variables from a ".env"-style configuration file (prior to any unset and/or set)]:PATH:_files' \
'*-u+[remove variable from the environment]:NAME: ' \
'*--unset=[remove variable from the environment]:NAME: ' \
'-i[start with an empty environment]' \
'--ignore-environment[start with an empty environment]' \
'-0[end each output line with a 0 byte rather than a newline (only valid when printing the environment)]' \
'--null[end each output line with a 0 byte rather than a newline (only valid when printing the environment)]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::vars:' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(timeout)
_arguments "${_arguments_options[@]}" \
'-k+[also send a KILL signal if COMMAND is still running this long after the initial signal was sent]: : ' \
'--kill-after=[also send a KILL signal if COMMAND is still running this long after the initial signal was sent]: : ' \
'-s+[specify the signal to be sent on timeout; SIGNAL may be a name like '\''HUP'\'' or a number; see '\''kill -l'\'' for a list of signals]:SIGNAL: ' \
'--signal=[specify the signal to be sent on timeout; SIGNAL may be a name like '\''HUP'\'' or a number; see '\''kill -l'\'' for a list of signals]:SIGNAL: ' \
'--foreground[when not running timeout directly from a shell prompt, allow COMMAND to read from the TTY and get TTY signals; in this mode, children of COMMAND will not be timed out]' \
'--preserve-status[exit with the same status as COMMAND, even when the command times out]' \
'-v[diagnose to stderr any signal sent upon timeout]' \
'--verbose[diagnose to stderr any signal sent upon timeout]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
':duration:' \
':command:_command_names -e' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
'-r[use the BSD sum algorithm, use 1K blocks (default)]' \
'-s[use System V sum algorithm, use 512 bytes blocks]' \
'--sysv[use System V sum algorithm, use 512 bytes blocks]' \
'-h[Print help information]' \
'--help[Print help information]' \
'-V[Print version information]' \
'--version[Print version information]' \
'::file:_files' \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
":: :_coreutils__help_commands" \
"*::: :->help" \
&& ret=0

    case $state in
    (help)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:coreutils-help-command-$line[1]:"
        case $line[1] in
            (completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(uu_env)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(timeout)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(completion)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
        esac
    ;;
esac
}

(( $+functions[_coreutils_commands] )) ||
_coreutils_commands() {
    local commands; commands=(
'completion:Checksum and count the blocks in a file.

With no FILE, or when FILE is -, read standard input.' \
'completion:Print the last 10 lines of each FILE to standard output.
With more than one FILE, precede each with a header giving the file name.
With no FILE, or when FILE is -, read standard input.

Mandatory arguments to long flags are mandatory for short flags too.' \
'completion:estimate file space usage' \
'completion:Check whether file names are valid or portable' \
'completion:Create the given DIRECTORY(ies) if they do not exist' \
'completion:Compute and check message digests.' \
'completion:number lines of files' \
'completion:Compute and check message digests.' \
'completion:Shuffle the input by outputting a random permutation of input lines. Each output permutation is equally likely. With no FILE, or when FILE is -, read standard input.' \
'completion:Run COMMAND ignoring hangup signals.' \
'completion:Print value of a symbolic link or canonical file name.' \
'completion:Display the current time, the length of time the system has been up,
the number of users on the system, and the average number of jobs
in the run queue over the last 1, 5 and 15 minutes.' \
'completion:Compute and check message digests.' \
'completion:Change the group of each FILE to GROUP.' \
'completion:Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.' \
'completion:Create output files containing consecutive or interleaved sections of input' \
'completion:Compute and check message digests.' \
'completion:Display numbers from FIRST to LAST, in steps of INCREMENT.' \
'completion:Print the prime factors of the given NUMBER(s).
If none are specified, read from standard input.' \
'completion:encode/decode data and print to standard output
With no FILE, or when FILE is -, read standard input.

The data are encoded as described for the base32 alphabet in RFC
4648. When decoding, the input may contain newlines in addition
to the bytes of the formal base32 alphabet. Use --ignore-garbage
to attempt to recover from any other non-alphabet bytes in the
encoded stream.' \
'completion:Display file or file system status.' \
'completion:List directory contents.
Ignore files and directories starting with a '\''.'\'' by default' \
'completion:Print the value of EXPRESSION to standard output' \
'completion:Copy, and optionally convert, a file system resource' \
'completion:Write content of given file or standard input to standard output with pagination filter' \
'completion:Convert numbers from/to human-readable strings' \
'completion:Prints specified byte or field columns from each line of stdin or the input files' \
'completion:Topological sort the strings in FILE.
Strings are defined as any sequence of tokens separated by whitespace (tab, space, or newline).
If FILE is not passed in, stdin is used instead.' \
'completion:Print CRC and size for each file' \
'completion:Remove (unlink) the FILE(s)' \
'completion:Synchronize cached writes to persistent storage' \
'completion:Write lines consisting of the sequentially corresponding lines from each
FILE, separated by TABs, to standard output.' \
'completion:Print the number of cores available to the current process.
If the OMP_NUM_THREADS or OMP_THREAD_LIMIT environment variables are set, then
they will determine the minimum and maximum returned value respectively.' \
'completion:Print the numeric identifier (in hexadecimal) for the current host' \
'completion:Check file types and compare values.' \
'completion:List directory contents.
Ignore files and directories starting with a '\''.'\'' by default' \
'completion:print the resolved path' \
'completion:Print certain system information.
With no OPTION, same as -s.' \
'completion:Output commands to set the LS_COLORS environment variable.' \
'completion:Print output based off of the format string and proceeding arguments.' \
'completion:Move SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.' \
'completion:Compute and check message digests.' \
'completion:Convert tabs in each FILE to spaces, writing to standard output.
 With no FILE, or when FILE is -, read standard input.' \
'completion:Print group memberships for each USERNAME or, if no USERNAME is specified, for
the current process (which may differ if the groups data‐base has changed).' \
'completion:Print the file name of the terminal connected to standard input.' \
'completion:create a temporary file or directory.' \
'completion:Convert TO destination to the relative path from the FROM dir.
If FROM path is omitted, current working dir will be used.' \
'completion:Display sorted concatenation of all FILE(s). With no FILE, or when FILE is -, read standard input.' \
'completion:Compute and check message digests.' \
'completion:compare two sorted files line by line' \
'completion:Display the full filename of the current working directory.' \
'completion:Overwrite the specified FILE(s) repeatedly, in order to make it harder
for even very expensive hardware probing to recover the data.
' \
'completion:Display newline, word, and byte counts for each FILE, and a total line if
more than one FILE is specified. With no FILE, or when FILE is -, read standard input.' \
'completion:Run COMMAND with an adjusted niceness, which affects process scheduling. With no COMMAND, print the current niceness.  Niceness values range from at least -20 (most favorable to the process) to 19 (least favorable to the process).' \
'completion:Change the mode of each FILE to MODE.
 With --reference, change the mode of each FILE to that of RFILE.' \
'completion:Display the values of the specified environment VARIABLE(s), or (with no VARIABLE) display name and value pairs for them all.' \
'completion:Copy SOURCE to DEST or multiple SOURCE(s) to the existing
 DIRECTORY, while setting permission modes and owner/group' \
'completion:print or set the system date and time' \
'completion:Compute and check message digests.' \
'completion:Run COMMAND with root directory set to NEWROOT.' \
'completion:Compute and check message digests.' \
'completion:change file owner and group' \
'completion:Compute and check message digests.' \
'completion:lightweight finger' \
'completion:repeatedly display a line with STRING (or '\''y'\'')' \
'completion:Print information about users who are currently logged in.' \
'completion:Create the special file NAME of the given TYPE.' \
'completion:Compute and check message digests.' \
'completion:Copy standard input to each FILE, and also to standard output.' \
'completion:Print NAME with any leading directory components removed
If specified, also remove a trailing SUFFIX' \
'completion:encode/decode data and print to standard output
With no FILE, or when FILE is -, read standard input.

When decoding, the input may contain newlines in addition to the bytes of
the formal alphabet. Use --ignore-garbage to attempt to recover
from any other non-alphabet bytes in the encoded stream.
' \
'completion:Shrink or extend the size of each file to the specified size.' \
'completion:Print the first 10 lines of each FILE to standard output.
With more than one FILE, precede each with a header giving the file name.
With no FILE, or when FILE is -, read standard input.

Mandatory arguments to long flags are mandatory for short flags too.' \
'completion:Returns true, a successful exit status.

Immediately returns with the exit status `0`, except when invoked with one of the recognized
options. In those cases it will try to write the help or version text. Any IO error during this
operation causes the program to return `1` instead.
' \
'uu_env:set each NAME to VALUE in the environment and run COMMAND' \
'completion:Pause for NUMBER seconds.' \
'completion:Remove the DIRECTORY(ies), if they are empty.' \
'completion:Compute and check message digests.' \
'completion:Check file types and compare values.' \
'completion:For each pair of input lines with identical join fields, write a line to
standard output. The default join field is the first, delimited by blanks.

When FILE1 or FILE2 (not both) is -, read standard input.' \
'completion:Concatenate FILE(s), or standard input, to standard output
With no FILE, or when FILE is -, read standard input.' \
'completion:encode/decode data and print to standard output
With no FILE, or when FILE is -, read standard input.

The data are encoded as described for the base32 alphabet in RFC
4648. When decoding, the input may contain newlines in addition
to the bytes of the formal base32 alphabet. Use --ignore-garbage
to attempt to recover from any other non-alphabet bytes in the
encoded stream.' \
'completion:dump files in octal and other formats' \
'completion:A file perusal filter for CRT viewing.' \
'completion:Report or omit repeated lines.' \
'completion:translate or delete characters' \
'completion:Send signal to processes or list information about signals.' \
'completion:Print user'\''s login name' \
'completion:Compute and check message digests.' \
'completion:Show information about the file system on which each FILE resides,
or all file systems by default.' \
'completion:Reformat paragraphs from input files (or stdin) to stdout.' \
'completion:Output a permuted index, including context, of the words in the input files. 

Mandatory arguments to long options are mandatory for short options too.
With no FILE, or when FILE is -, read standard input. Default is '\''-F /'\''.' \
'completion:Run COMMAND, with modified buffering operations for its standard streams.

Mandatory arguments to long options are mandatory for short options too.' \
'completion:Compute and check message digests.' \
'completion:change file owner and group' \
'completion:Compute and check message digests.' \
'completion:Print user and group information for each specified USER,
or (when USER omitted) for the current user.' \
'completion:Display machine architecture' \
'completion:Convert blanks in each FILE to tabs, writing to standard output.

With no FILE, or when FILE is -, read standard input.' \
'completion:Print the user names of users currently logged in to the current host' \
'completion:Update the access and modification times of each FILE to the current time.' \
'completion:Create a FIFO with the given name.' \
'completion:split a file into sections determined by context lines' \
'completion:Print the current username.' \
'completion:Returns false, an unsuccessful exit status.

Immediately returns with the exit status `1`. When invoked with one of the recognized options it
will try to write the help or version text. Any IO error during this operation is diagnosed, yet
the program will also return `1`.
' \
'timeout:Start COMMAND, and kill it if still running after DURATION.' \
'completion:Compute and check message digests.' \
'completion:Change the SELinux security context of each FILE to CONTEXT. 
With --reference, change the security context of each FILE to that of RFILE.' \
'completion:Display or set the system'\''s host name.' \
'completion:Unlink the file at FILE.' \
'completion:Run command with specified security context.' \
'completion:Compute and check message digests.' \
'completion:Call the link function to create a link named FILE2 to an existing FILE1.' \
'completion:strip last component from file name' \
'completion:Write each file to standard output, last line first.' \
'completion:List directory contents.
Ignore files and directories starting with a '\''.'\'' by default' \
'completion:display a line of text' \
'completion:Writes each file (or standard input if no files are given)
 to standard output whilst breaking long lines' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'coreutils commands' commands "$@"
}
(( $+functions[_coreutils__completion_commands] )) ||
_coreutils__completion_commands() {
    local commands; commands=()
    _describe -t commands 'coreutils completion commands' commands "$@"
}
(( $+functions[_coreutils__help__completion_commands] )) ||
_coreutils__help__completion_commands() {
    local commands; commands=()
    _describe -t commands 'coreutils help completion commands' commands "$@"
}
(( $+functions[_coreutils__help_commands] )) ||
_coreutils__help_commands() {
    local commands; commands=(
'completion:Checksum and count the blocks in a file.

With no FILE, or when FILE is -, read standard input.' \
'completion:Print the last 10 lines of each FILE to standard output.
With more than one FILE, precede each with a header giving the file name.
With no FILE, or when FILE is -, read standard input.

Mandatory arguments to long flags are mandatory for short flags too.' \
'completion:estimate file space usage' \
'completion:Check whether file names are valid or portable' \
'completion:Create the given DIRECTORY(ies) if they do not exist' \
'completion:Compute and check message digests.' \
'completion:number lines of files' \
'completion:Compute and check message digests.' \
'completion:Shuffle the input by outputting a random permutation of input lines. Each output permutation is equally likely. With no FILE, or when FILE is -, read standard input.' \
'completion:Run COMMAND ignoring hangup signals.' \
'completion:Print value of a symbolic link or canonical file name.' \
'completion:Display the current time, the length of time the system has been up,
the number of users on the system, and the average number of jobs
in the run queue over the last 1, 5 and 15 minutes.' \
'completion:Compute and check message digests.' \
'completion:Change the group of each FILE to GROUP.' \
'completion:Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.' \
'completion:Create output files containing consecutive or interleaved sections of input' \
'completion:Compute and check message digests.' \
'completion:Display numbers from FIRST to LAST, in steps of INCREMENT.' \
'completion:Print the prime factors of the given NUMBER(s).
If none are specified, read from standard input.' \
'completion:encode/decode data and print to standard output
With no FILE, or when FILE is -, read standard input.

The data are encoded as described for the base32 alphabet in RFC
4648. When decoding, the input may contain newlines in addition
to the bytes of the formal base32 alphabet. Use --ignore-garbage
to attempt to recover from any other non-alphabet bytes in the
encoded stream.' \
'completion:Display file or file system status.' \
'completion:List directory contents.
Ignore files and directories starting with a '\''.'\'' by default' \
'completion:Print the value of EXPRESSION to standard output' \
'completion:Copy, and optionally convert, a file system resource' \
'completion:Write content of given file or standard input to standard output with pagination filter' \
'completion:Convert numbers from/to human-readable strings' \
'completion:Prints specified byte or field columns from each line of stdin or the input files' \
'completion:Topological sort the strings in FILE.
Strings are defined as any sequence of tokens separated by whitespace (tab, space, or newline).
If FILE is not passed in, stdin is used instead.' \
'completion:Print CRC and size for each file' \
'completion:Remove (unlink) the FILE(s)' \
'completion:Synchronize cached writes to persistent storage' \
'completion:Write lines consisting of the sequentially corresponding lines from each
FILE, separated by TABs, to standard output.' \
'completion:Print the number of cores available to the current process.
If the OMP_NUM_THREADS or OMP_THREAD_LIMIT environment variables are set, then
they will determine the minimum and maximum returned value respectively.' \
'completion:Print the numeric identifier (in hexadecimal) for the current host' \
'completion:Check file types and compare values.' \
'completion:List directory contents.
Ignore files and directories starting with a '\''.'\'' by default' \
'completion:print the resolved path' \
'completion:Print certain system information.
With no OPTION, same as -s.' \
'completion:Output commands to set the LS_COLORS environment variable.' \
'completion:Print output based off of the format string and proceeding arguments.' \
'completion:Move SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.' \
'completion:Compute and check message digests.' \
'completion:Convert tabs in each FILE to spaces, writing to standard output.
 With no FILE, or when FILE is -, read standard input.' \
'completion:Print group memberships for each USERNAME or, if no USERNAME is specified, for
the current process (which may differ if the groups data‐base has changed).' \
'completion:Print the file name of the terminal connected to standard input.' \
'completion:create a temporary file or directory.' \
'completion:Convert TO destination to the relative path from the FROM dir.
If FROM path is omitted, current working dir will be used.' \
'completion:Display sorted concatenation of all FILE(s). With no FILE, or when FILE is -, read standard input.' \
'completion:Compute and check message digests.' \
'completion:compare two sorted files line by line' \
'completion:Display the full filename of the current working directory.' \
'completion:Overwrite the specified FILE(s) repeatedly, in order to make it harder
for even very expensive hardware probing to recover the data.
' \
'completion:Display newline, word, and byte counts for each FILE, and a total line if
more than one FILE is specified. With no FILE, or when FILE is -, read standard input.' \
'completion:Run COMMAND with an adjusted niceness, which affects process scheduling. With no COMMAND, print the current niceness.  Niceness values range from at least -20 (most favorable to the process) to 19 (least favorable to the process).' \
'completion:Change the mode of each FILE to MODE.
 With --reference, change the mode of each FILE to that of RFILE.' \
'completion:Display the values of the specified environment VARIABLE(s), or (with no VARIABLE) display name and value pairs for them all.' \
'completion:Copy SOURCE to DEST or multiple SOURCE(s) to the existing
 DIRECTORY, while setting permission modes and owner/group' \
'completion:print or set the system date and time' \
'completion:Compute and check message digests.' \
'completion:Run COMMAND with root directory set to NEWROOT.' \
'completion:Compute and check message digests.' \
'completion:change file owner and group' \
'completion:Compute and check message digests.' \
'completion:lightweight finger' \
'completion:repeatedly display a line with STRING (or '\''y'\'')' \
'completion:Print information about users who are currently logged in.' \
'completion:Create the special file NAME of the given TYPE.' \
'completion:Compute and check message digests.' \
'completion:Copy standard input to each FILE, and also to standard output.' \
'completion:Print NAME with any leading directory components removed
If specified, also remove a trailing SUFFIX' \
'completion:encode/decode data and print to standard output
With no FILE, or when FILE is -, read standard input.

When decoding, the input may contain newlines in addition to the bytes of
the formal alphabet. Use --ignore-garbage to attempt to recover
from any other non-alphabet bytes in the encoded stream.
' \
'completion:Shrink or extend the size of each file to the specified size.' \
'completion:Print the first 10 lines of each FILE to standard output.
With more than one FILE, precede each with a header giving the file name.
With no FILE, or when FILE is -, read standard input.

Mandatory arguments to long flags are mandatory for short flags too.' \
'completion:Returns true, a successful exit status.

Immediately returns with the exit status `0`, except when invoked with one of the recognized
options. In those cases it will try to write the help or version text. Any IO error during this
operation causes the program to return `1` instead.
' \
'uu_env:set each NAME to VALUE in the environment and run COMMAND' \
'completion:Pause for NUMBER seconds.' \
'completion:Remove the DIRECTORY(ies), if they are empty.' \
'completion:Compute and check message digests.' \
'completion:Check file types and compare values.' \
'completion:For each pair of input lines with identical join fields, write a line to
standard output. The default join field is the first, delimited by blanks.

When FILE1 or FILE2 (not both) is -, read standard input.' \
'completion:Concatenate FILE(s), or standard input, to standard output
With no FILE, or when FILE is -, read standard input.' \
'completion:encode/decode data and print to standard output
With no FILE, or when FILE is -, read standard input.

The data are encoded as described for the base32 alphabet in RFC
4648. When decoding, the input may contain newlines in addition
to the bytes of the formal base32 alphabet. Use --ignore-garbage
to attempt to recover from any other non-alphabet bytes in the
encoded stream.' \
'completion:dump files in octal and other formats' \
'completion:A file perusal filter for CRT viewing.' \
'completion:Report or omit repeated lines.' \
'completion:translate or delete characters' \
'completion:Send signal to processes or list information about signals.' \
'completion:Print user'\''s login name' \
'completion:Compute and check message digests.' \
'completion:Show information about the file system on which each FILE resides,
or all file systems by default.' \
'completion:Reformat paragraphs from input files (or stdin) to stdout.' \
'completion:Output a permuted index, including context, of the words in the input files. 

Mandatory arguments to long options are mandatory for short options too.
With no FILE, or when FILE is -, read standard input. Default is '\''-F /'\''.' \
'completion:Run COMMAND, with modified buffering operations for its standard streams.

Mandatory arguments to long options are mandatory for short options too.' \
'completion:Compute and check message digests.' \
'completion:change file owner and group' \
'completion:Compute and check message digests.' \
'completion:Print user and group information for each specified USER,
or (when USER omitted) for the current user.' \
'completion:Display machine architecture' \
'completion:Convert blanks in each FILE to tabs, writing to standard output.

With no FILE, or when FILE is -, read standard input.' \
'completion:Print the user names of users currently logged in to the current host' \
'completion:Update the access and modification times of each FILE to the current time.' \
'completion:Create a FIFO with the given name.' \
'completion:split a file into sections determined by context lines' \
'completion:Print the current username.' \
'completion:Returns false, an unsuccessful exit status.

Immediately returns with the exit status `1`. When invoked with one of the recognized options it
will try to write the help or version text. Any IO error during this operation is diagnosed, yet
the program will also return `1`.
' \
'timeout:Start COMMAND, and kill it if still running after DURATION.' \
'completion:Compute and check message digests.' \
'completion:Change the SELinux security context of each FILE to CONTEXT. 
With --reference, change the security context of each FILE to that of RFILE.' \
'completion:Display or set the system'\''s host name.' \
'completion:Unlink the file at FILE.' \
'completion:Run command with specified security context.' \
'completion:Compute and check message digests.' \
'completion:Call the link function to create a link named FILE2 to an existing FILE1.' \
'completion:strip last component from file name' \
'completion:Write each file to standard output, last line first.' \
'completion:List directory contents.
Ignore files and directories starting with a '\''.'\'' by default' \
'completion:display a line of text' \
'completion:Writes each file (or standard input if no files are given)
 to standard output whilst breaking long lines' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'coreutils help commands' commands "$@"
}
(( $+functions[_coreutils__help__help_commands] )) ||
_coreutils__help__help_commands() {
    local commands; commands=()
    _describe -t commands 'coreutils help help commands' commands "$@"
}
(( $+functions[_coreutils__help__timeout_commands] )) ||
_coreutils__help__timeout_commands() {
    local commands; commands=()
    _describe -t commands 'coreutils help timeout commands' commands "$@"
}
(( $+functions[_coreutils__timeout_commands] )) ||
_coreutils__timeout_commands() {
    local commands; commands=()
    _describe -t commands 'coreutils timeout commands' commands "$@"
}
(( $+functions[_coreutils__help__uu_env_commands] )) ||
_coreutils__help__uu_env_commands() {
    local commands; commands=()
    _describe -t commands 'coreutils help uu_env commands' commands "$@"
}
(( $+functions[_coreutils__uu_env_commands] )) ||
_coreutils__uu_env_commands() {
    local commands; commands=()
    _describe -t commands 'coreutils uu_env commands' commands "$@"
}

_coreutils "$@"
