Package: iputils-ping
Status: install ok unpacked
Priority: important
Section: net
Installed-Size: 116
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: amd64
Source: iputils (3:20121221-5)
Version: 3:20121221-5+b2
Provides: ping
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10), libgnutls-openssl27 (>= 3.0-0)
Recommends: libcap2-bin
Description: Tools to test the reachability of network hosts
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1447
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.1+deb8u2
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://pam.sourceforge.net/

Package: vim-tiny
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1051
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: vim
Version: 2:7.4.488-7+deb8u3
Provides: editor
Depends: vim-common (= 2:7.4.488-7+deb8u3), libacl1 (>= 2.2.51-8), libc6 (>= 2.15), libselinux1 (>= 1.32), libtinfo5
Suggests: indent
Conffiles:
 /etc/vim/vimrc.tiny cda3c912e5fd54a07996ee29b14c58eb
Description: Vi IMproved - enhanced vi editor - compact version
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 Many new features have been added: multi level undo, syntax
 highlighting, command line history, on-line help, filename
 completion, block operations, folding, Unicode support, etc.
 .
 This package contains a minimal version of vim compiled with no
 GUI and a small subset of features in order to keep small the
 package size. This package does not depend on the vim-runtime
 package, but installing it you will get its additional benefits
 (online documentation, plugins, ...).
Homepage: http://www.vim.org/

Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 306
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses (5.9+20140913-1)
Version: 5.9+20140913-1+b1
Depends: libtinfo5 (= 5.9+20140913-1+b1), libc6 (>= 2.15)
Pre-Depends: multiarch-support, libtinfo5 (>= 5.9-3)
Recommends: libgpm2
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: http://invisible-island.net/ncurses/

Package: libaudit1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 157
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: audit (1:2.4-1)
Version: 1:2.4-1+b1
Depends: libaudit-common (>= 1:2.4-1), libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: http://people.redhat.com/sgrubb/audit/

Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 109
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: readline6
Version: 6.3-8
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libtinfo5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 480
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses (5.9+20140913-1)
Version: 5.9+20140913-1+b1
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Breaks: dialog (<< 1.2-20130523)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: http://invisible-island.net/ncurses/

Package: libgdbm3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 85
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.8.3-13.1
Depends: libc6 (>= 2.14), dpkg (>= 1.15.4) | install-info
Pre-Depends: multiarch-support
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Homepage: http://directory.fsf.org/project/gdbm/

Package: manpages
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 1047
Maintainer: Martin Schulze <joey@debian.org>
Architecture: all
Version: 3.74-1
Replaces: bind, libc-bin (<< 2.19-12), libc-dev-bin (<< 2.19-12)
Suggests: man-browser
Description: Manual pages about using a GNU/Linux system
 This package contains GNU/Linux manual pages for these sections:
  4 = Devices (e.g. hd, sd).
  5 = File formats and protocols, syntaxes of several system
      files (e.g. wtmp, /etc/passwd, nfs).
  7 = Conventions and standards, macro packages, etc.
      (e.g. nroff, ascii).
 .
 Sections 1, 6 and 8 are provided by the respective applications. This
 package only includes the intro man page describing the section.
 .
 The man pages describe syntaxes of several system files.
Homepage: http://www.kernel.org/doc/man-pages/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 5097
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Source: perl
Version: 5.20.2-3+deb8u6
Replaces: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl5-base, perlapi-5.20.0, perlapi-5.20.1, perlapi-5.20.2
Pre-Depends: libc6 (>= 2.14), dpkg (>= 1.17.17)
Suggests: perl
Breaks: autoconf2.13 (<< 2.13-45), libalien-wxwidgets-perl (<< 0.65+dfsg-2), libanyevent-perl (<< 7.070-2), libcommon-sense-perl (<< 3.72-2~), libfile-path-perl (<< 2.09), libfile-spec-perl (<< 3.4801), libfile-temp-perl (<< 0.2304), libgtk2-perl-doc (<< 2:1.2491-4), libio-socket-ip-perl (<< 0.29), libjcode-perl (<< 2.13-3), libmarc-charset-perl (<< 1.2), libscalar-list-utils-perl (<< 1:1.38), libsocket-perl (<< 2.013), libxsloader-perl (<< 0.17), pdl (<< 1:2.007-4), perl (<< 5.20.0~)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/

Package: libudev1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 101
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 215-17+deb8u7
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: libudev shared library
 This library provides access to udev device information.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: libxtables10
Status: install ok installed
Priority: important
Section: net
Installed-Size: 111
Maintainer: Laurence J. Lane <ljlane@debian.org>
Architecture: amd64
Source: iptables (1.4.21-2)
Version: 1.4.21-2+b1
Replaces: iptables (<< 1.4.16.3-3)
Depends: libc6 (>= 2.14)
Breaks: iptables (<< 1.4.16.3-3)
Description: netfilter xtables library
 The user-space interface to the Netfilter xtables kernel framework.
Homepage: http://www.netfilter.org/

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 648
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.11+dfsg-4.1+deb8u1
Replaces: cpio-mt
Depends: libc6 (>= 2.17)
Suggests: libarchive1
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: http://www.gnu.org/software/cpio/

Package: libpopt0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 131
Maintainer: Paul Martin <pm@debian.org>
Architecture: amd64
Multi-Arch: same
Source: popt
Version: 1.16-10
Replaces: popt
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Conflicts: libpopt-dev (<= 1.4-1), popt, rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Homepage: http://rpm5.org/

Package: kmod
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 274
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: foreign
Version: 18-3
Replaces: module-init-tools (<< 4)
Depends: libc6 (>= 2.17), libkmod2 (= 18-3), lsb-base (>= 3.0-6)
Breaks: alsa-base (<= 1.0.25+3), module-init-tools (<< 4), oss-compat (= 4)
Conffiles:
 /etc/init.d/kmod 96948a484687c865b98806684649cee8
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
 It replaces module-init-tools.

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 30
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: attr
Version: 1:2.4.47-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: http://savannah.nongnu.org/projects/attr/

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 82
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.42.12-2)
Version: 1.42.12-2+b1
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2, libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net

Package: nfacct
Status: install ok unpacked
Priority: extra
Section: net
Installed-Size: 54
Maintainer: Laurence J. Lane <ljlane@debian.org>
Architecture: amd64
Version: 1.0.1-1.1
Depends: libc6 (>= 2.7), libmnl0 (>= 1.0.3-4~), libnetfilter-acct1
Description: netfilter accounting object tool
 This is the command line tool to create/retrieve/delete
 netfilter accounting objects.
 .
 Requires Linux kernel 3.3+ nfnetlink_acct subsystem.
Homepage: http://netfilter.org/projects/nfacct/

Package: libestr0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 50
Maintainer: Pierre Chifflier <pollux@debian.org>
Architecture: amd64
Source: libestr
Version: 0.1.9-1.1
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Helper functions for handling strings (lib)
 The 'libestr' library implements some helper functions to
 handle strings and easily, escaping special characters etc.
 .
 This package contains the shared library.
Homepage: http://libestr.sourceforge.net/

Package: less
Status: install ok installed
Priority: important
Section: text
Installed-Size: 253
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 458-3
Depends: libc6 (>= 2.14), libtinfo5, debianutils (>= 1.8)
Description: pager program similar to more
 This package provides "less", a file pager (that is, a memory-efficient
 utility for displaying text one screenful at a time). Less has many
 more features than the basic pager "more". As part of the GNU project,
 it is widely regarded as the standard pager on UNIX-derived systems.
 .
 Also provided are "lessecho", a simple utility for ensuring arguments
 with spaces are correctly quoted; "lesskey", a tool for modifying the
 standard (vi-like) keybindings; and "lesspipe", a filter for specific
 types of input, such as .doc or .txt.gz files.
Homepage: http://www.greenwoodsoftware.com/less/

Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 309
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: xz-utils (5.1.1alpha+20120614-2)
Version: 5.1.1alpha+20120614-2+b3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: http://tukaani.org/xz/

Package: gcc-4.8-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 212
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-4.8
Version: 4.8.4-1
Breaks: dehydra (<= 0.9.hg20110609-2), gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: libhogweed2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 223
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 2.7.1-5+deb8u2
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.0.0), libnettle4 (= 2.7.1-5+deb8u2)
Pre-Depends: multiarch-support
Breaks: libgnutls-deb0-28 (<< 3.3.8-6+deb8u4)
Description: low level cryptographic library (public-key cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the asymmetric cryptographic algorithms, which,
 require the GNU multiple precision arithmetic library (libgmp) for
 their large integer computations.
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 248
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.1+deb8u2
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://pam.sourceforge.net/

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1272
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.20-4.1
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.14), libpcre3 (>= 1:8.35)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: http://www.gnu.org/software/grep/

Package: ifupdown
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 122
Maintainer: Andrew Shadura <andrewsh@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 0.7.53.1
Replaces: netbase (<< 5.0)
Depends: iproute2 | iproute (>= 20071016-1), libc6 (>= 2.14), lsb-base (>= 4.1+Debian3), initscripts (>= 2.88dsf-25), adduser
Recommends: isc-dhcp-client | dhcp-client
Suggests: ppp, rdnssd, net-tools
Breaks: dhcp3-client (<< 4.0), netbase (<< 5.0)
Conffiles:
 /etc/default/networking 35cd4a2713981c9239ce4532c1bfc1c7
 /etc/init.d/networking 6b377b7e2cfece0c9d1c81f40002636f
 /etc/init/network-interface-container.conf 4daa570594afc50940f140a7731d20d1
 /etc/init/network-interface-security.conf feb6b4b52fe24c44ff1bc68addf245d6
 /etc/init/network-interface.conf aae12345eba8e946579b06798b1752c1
 /etc/init/networking.conf c50811e19bcd596d99b0467b40cfbb8b
 /etc/network/if-down.d/upstart 1a0205ddbc1446782a8d4d818e97d8a5
 /etc/network/if-up.d/upstart dfbcde4fd4a3a2553930605e03e160ab
Description: high level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.

Package: libssl1.0.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3075
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 1.0.1t-1+deb8u6
Depends: libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 185
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5.37
Replaces: base
Depends: libc6 (>= 2.8), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: libisccfg-export90
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 79
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: amd64
Source: bind9
Version: 1:9.9.5.dfsg-9+deb8u10
Depends: libc6 (>= 2.4), libisc-export95
Pre-Depends: multiarch-support
Description: Exported ISC CFG Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libisccfg shared library.

Package: e2fslibs
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 386
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.42.12-2)
Version: 1.42.12-2+b1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 147
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: debianutils (4.4)
Version: 4.4+b1
Replaces: manpages-pl (<< 1:0.5)
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 tempfile which

Package: libsigc++-2.0-0c2a
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 108
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsigc++-2.0
Version: 2.4.0-1
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6)
Pre-Depends: multiarch-support
Description: type-safe Signal Framework for C++ - runtime
 This library implements a full callback system for use in widget
 libraries, abstract interfaces, and general programming. It provides
 the ability to connect an abstract callback to a class method,
 function, or function object, and contains adaptor classes for the
 connection of dissimilar callbacks.
 .
 These are the runtime files for libsigc++, needed only if you wish to
 run software which depends on it.

Package: libncursesw5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 388
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses (5.9+20140913-1)
Version: 5.9+20140913-1+b1
Depends: libtinfo5 (= 5.9+20140913-1+b1), libc6 (>= 2.15)
Pre-Depends: multiarch-support
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: http://invisible-island.net/ncurses/

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 5010
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.3-11+deb8u1
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.15), libncurses5 (>= 5.5-5~), libtinfo5
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/bash.bashrc 87b895cef45b8090d628a1d9a0f4bfb8
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc e62ae447bdd228160f1f0b6bab8a7fd3
 /etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html

Package: isc-dhcp-common
Status: install ok unpacked
Priority: important
Section: net
Installed-Size: 451
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: amd64
Source: isc-dhcp
Version: 4.3.1-6+deb8u2
Depends: libc6 (>= 2.15), libdns-export100, libirs-export91, libisc-export95, debianutils (>= 2.8.2)
Description: common files used by all of the isc-dhcp packages
 This package includes all of the files that are used in common by the various
 ISC DHCP packages, such as the dhcp-eval and dhcp-options manpages and the
 OMAPI command shell.
Homepage: http://www.isc.org

Package: dmidecode
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 170
Maintainer: Jörg Frings-Fürst <debian@jff-webhosting.net>
Architecture: amd64
Version: 2.12-3
Depends: libc6 (>= 2.4)
Description: SMBIOS/DMI table decoder
 Dmidecode reports information about the system's hardware as described in the
 system BIOS according to the SMBIOS/DMI standard.
 .
 This information typically includes system manufacturer, model name, serial
 number, BIOS version, asset tag as well as a lot of other details of varying
 level of interest and reliability depending on the manufacturer. This will
 often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI,
 ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel,
 USB).
 .
 Beware that DMI data have proven to be too unreliable to be blindly trusted.
 Dmidecode does not scan the hardware, it only reports what the BIOS told it to.
Homepage: http://dmidecode.nongnu.org/

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 122
Maintainer: Denis Roio <jaromil@dyne.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.26.2-6+devuan1
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.

Package: libdb5.3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1812
Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28-9
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Homepage: http://www.oracle.com/technology/software/products/berkeley-db/index.html

Package: apt-utils
Status: install ok unpacked
Priority: important
Section: admin
Installed-Size: 950
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Source: apt
Version: 1.0.9.8.4
Depends: apt, libapt-inst1.5 (>= 0.9.15.4), libapt-pkg4.12 (>= 0.9.16), libc6 (>= 2.14), libdb5.3, libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.9)
Description: package management related utility programs
 This package contains some less used commandline utilities related
 to package management with APT.
 .
  * apt-extracttemplates is used by debconf to prompt for configuration
    questions before installation.
  * apt-ftparchive is used to create Packages and other index files
    needed to publish an archive of debian packages
  * apt-sortpkgs is a Packages/Sources file normalizer.

Package: debconf
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 614
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.5.56
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/bash_completion.d/debconf 8fa1862734fbe54d7178aaaa419f5a11
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: debconf-i18n
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 1091
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Source: debconf
Version: 1.5.56
Replaces: debconf (<< 1.3.0), debconf-utils (<< 1.3.22)
Depends: debconf (= 1.5.56), liblocale-gettext-perl, libtext-iconv-perl, libtext-wrapi18n-perl, libtext-charwidth-perl
Conflicts: debconf-english, debconf-utils (<< 1.3.22)
Description: full internationalization support for debconf
 This package provides full internationalization for debconf, including
 translations into all available languages, support for using translated
 debconf templates, and support for proper display of multibyte character
 sets.

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 179
Maintainer: Mark Brown <broonie@debian.org>
Architecture: amd64
Multi-Arch: same
Source: zlib (1:1.2.8.dfsg-2)
Version: 1:1.2.8.dfsg-2+b1
Provides: libz1
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 59
Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>
Architecture: amd64
Version: 3.15
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.

Package: multiarch-support
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 194
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.19-18+deb8u9
Depends: libc6 (>= 2.3.6-2)
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 1710
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2017b-0+deb8u1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-jessie
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: http://www.iana.org/time-zones

Package: init
Essential: yes
Status: install ok installed
Priority: required
Section: metapackages
Installed-Size: 30
Maintainer: Daniel Reurich <daniel@centurion.net.nz>
Architecture: amd64
Multi-Arch: foreign
Source: init-system-helpers
Version: 1.24+devuan1.0
Pre-Depends: sysvinit-core | upstart
Description: System-V-like init utilities - metapackage
 This package is an essential metapackage which allows you to select from
 available init systems in Devuan (sysvinit, upstart) while
 ensuring that one of these is available on the system at all times.

Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 198
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.3.3-17
Provides: awk
Pre-Depends: libc6 (>= 2.11)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 239
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: amd64
Version: 1.6-4
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.17)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.

Package: groff-base
Status: install ok installed
Priority: important
Section: text
Installed-Size: 3203
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: groff
Version: 1.22.2-8
Replaces: groff (<< 1.20.1-6), jgroff (<< 1.17-1)
Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1)
Suggests: groff
Breaks: groff (<< 1.17-1), jgroff (<< 1.17-1), pmake (<< 1.45-7), troffcvt (<< 1.04-14)
Conffiles:
 /etc/groff/man.local 99a34592e41fb1e0639cf0fc64596346
 /etc/groff/mdoc.local f8c3e22fae1765942089881d9c5edeae
Description: GNU troff text-formatting system (base system components)
 This package contains the traditional UN*X text formatting tools
 troff, nroff, tbl, eqn, and pic. These utilities, together with the
 man-db package, are essential for displaying the on-line manual pages.
 .
 groff-base is a stripped-down package containing the necessary components
 to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript
 device (groff's default). Users who want a full groff installation, with
 the standard set of devices, fonts, macros, and documentation, should
 install the groff package.
Homepage: https://www.gnu.org/software/groff/

Package: liblognorm1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 98
Maintainer: Pierre Chifflier <pollux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: liblognorm
Version: 1.0.1-3
Replaces: liblognorm0
Depends: libc6 (>= 2.14), libestr0 (>= 0.1.0), libjson-c2 (>= 0.10)
Pre-Depends: multiarch-support
Description: Log normalizing library
 Liblognorm is a event and log normalization library that is capable of
 real-time processing. It provides the capability to normalize events to
 a set of standard formats.
 .
 This package contains the shared library.
Homepage: http://www.liblognorm.com/

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 414
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg
Version: 1.4.18-7+deb8u3
Depends: libbz2-1.0, libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is a stripped-down version of gnupg which is only able to check
 signatures.  It is smaller than the full-blown gnupg and uses a
 different (and simpler) way to check that the public keys used to
 make the signature are trustworthy.
Homepage: http://www.gnupg.org

Package: libcap2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 61
Maintainer: Christian Kastner <debian@kvr.at>
Architecture: amd64
Multi-Arch: same
Version: 1:2.24-8
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Homepage: http://sites.google.com/site/fullycapable/

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 240
Maintainer: Denis Roio <jaromil@dyne.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.26.2-6+devuan1)
Version: 1:2.26.2-6+devuan1
Replaces: bash-completion (<< 1:2.1-4.1~)
Pre-Depends: libc6 (>= 2.15)
Recommends: bsdmainutils
Breaks: bash-completion (<< 1:2.1-4.1~)
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a
 Debian system: logger, renice, script, scriptreplay, and wall. The
 remaining standard BSD utilities are provided by bsdmainutils.

Package: whiptail
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 54
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: newt (0.52.17-1)
Version: 0.52.17-1+b1
Depends: libc6 (>= 2.14), libnewt0.52, libpopt0 (>= 1.14), libslang2 (>= 2.2.4)
Conffiles:
 /etc/bash_completion.d/whiptail bcd454929e3a3107961ba3cb1a98c5f4
Description: Displays user-friendly dialog boxes from shell scripts
 Whiptail is a "dialog" replacement using newt instead of ncurses. It
 provides a method of displaying several different types of dialog boxes
 from shell scripts. This allows a developer of a script to interact with
 the user in a much friendlier manner.
Homepage: https://fedorahosted.org/newt/

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 191
Maintainer: Gerrit Pape <pape@smarden.org>
Architecture: amd64
Source: dash (0.5.7-4)
Version: 0.5.7-4+b1
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.14)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: liblogging-stdlog0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Michael Biebl <biebl@debian.org>
Architecture: amd64
Multi-Arch: same
Source: liblogging
Version: 1.0.4-1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: easy to use and lightweight logging library
 Liblogging consists of several components with stdlog being the core
 component. Think of liblogging-stdlog as the next version of the
 syslog(3) API. It retains the simple semantics, but makes the API more
 sophisticated "behind the scenes" with better support for multiple
 threads and flexibility for different log destinations.
 .
 This package contains the shared library.
Homepage: http://www.liblogging.org/

Package: gnupg
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 4893
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.18-7+deb8u3
Depends: gpgv, libbz2-1.0, libc6 (>= 2.15), libreadline6 (>= 6.0), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4)
Recommends: gnupg-curl, libldap-2.4-2 (>= 2.4.7)
Suggests: gnupg-doc, libpcsclite1, parcimonie, xloadimage | imagemagick | eog
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 GnuPG 1.4 is the standalone, non-modularized series. In contrast to
 the version 2 series, shipped with the gnupg2 package, it comes
 with no support for S/MIME and some other tools useful for desktop
 environments, but also with less dependencies.
 .
 The gnupg package is built without libcurl. So it does not support
 HKPS keyservers. Install the gnupg-curl package if you want to use
 the keyserver helper tools built with libcurl and supporting HKPS.
Homepage: http://www.gnupg.org

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 430
Maintainer: Denis Roio <jaromil@dyne.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.26.2-6+devuan1
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libmount1 (>= 2.25), libselinux1 (>= 2.0.15), libsmartcols1 (>= 2.25)
Suggests: nfs-common (>= 1:1.1.0-13)
Description: Tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: libpsl0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 510
Maintainer: Tim Rühsen <tim.ruehsen@gmx.de>
Architecture: amd64
Multi-Arch: same
Source: libpsl
Version: 0.5.1-1
Depends: libc6 (>= 2.8), libicu52 (>= 52~m1-1~)
Description: Library for Public Suffix List (shared libraries)
 Libpsl allows checking domains against the Public Suffix List,
 It can be used to avoid privacy-leaking 'super-cookies',
 'super domain' certificates, for domain highlighting purposes
 sorting domain lists by site and more.
 .
 This package contains runtime libraries.
Homepage: https://github.com/rockdaboot/libpsl

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 10229
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.19-18+deb8u9
Replaces: libc6-amd64
Depends: libgcc1
Suggests: glibc-doc, debconf | debconf-2.0, locales
Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.19), locales-all (<< 2.19), lsb-core (<= 3.2-27), nscd (<< 2.19)
Conflicts: prelink (<= 0.0.20090311-1), tzdata (<< 2007k-1), tzdata-etch
Conffiles:
 /etc/ld.so.conf.d/x86_64-linux-gnu.conf 593ad12389ab2b6f952e7ede67b8fbbf
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: netcat-traditional
Status: install ok installed
Priority: important
Section: net
Installed-Size: 157
Maintainer: Ruben Molina <rmolina@udea.edu.co>
Architecture: amd64
Source: netcat
Version: 1.10-41
Provides: netcat
Depends: libc6 (>= 2.15)
Description: TCP/IP swiss army knife
 A simple Unix utility which reads and writes data across network
 connections using TCP or UDP protocol. It is designed to be a reliable
 "back-end" tool that can be used directly or easily driven by other
 programs and scripts. At the same time it is a feature-rich network
 debugging and exploration tool, since it can create almost any kind
 of connection you would need and has several interesting built-in
 capabilities.
 .
 This is the "classic" netcat, written by *Hobbit*. It lacks many
 features found in netcat-openbsd.

Package: libprocps3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 132
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: procps
Version: 2:3.3.9-9
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: library for accessing process information from /proc
 The libprocps library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compilied with libprocps.
Homepage: http://gitorious.org/procps

Package: libboost-iostreams1.55.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 164
Maintainer: Debian Boost Team <pkg-boost-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: boost1.55
Version: 1.55.0+dfsg-3
Depends: libbz2-1.0, libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.2.1), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Description: Boost.Iostreams Library
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Iostreams are a collection of concepts and a set of templates
 which turn models of these concepts into C++ standard library streams
 and stream buffers.
Homepage: http://www.boost.org/libs/iostreams/

Package: startpar
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 95
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: amd64
Version: 0.59-3
Replaces: sysvinit-utils (<< 2.88dsf-52)
Depends: libc6 (>= 2.15)
Suggests: insserv, sysv-rc
Breaks: sysvinit-utils (<< 2.88dsf-52)
Conffiles:
 /etc/init/startpar-bridge.conf 152b77b1904939b461edc251844d0008
Description: run processes in parallel and multiplex their output
 Used by the sysv-rc boot system executor to run init.d scripts in parallel
 while making sure the script output is not completely messed up.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libirs-export91
Status: install ok unpacked
Priority: optional
Section: libs
Installed-Size: 69
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: amd64
Source: bind9
Version: 1:9.9.5.dfsg-9+deb8u10
Depends: libc6 (>= 2.14), libdns-export100, libisc-export95, libisccfg-export90
Pre-Depends: multiarch-support
Description: Exported IRS Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libirs shared library.

Package: libfdisk1
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 458
Maintainer: Denis Roio <jaromil@dyne.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.26.2-6+devuan1
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libuuid1 (>= 2.16)
Description: fdisk partitioning library
 The libfdisk library is used for manipulating with partition tables.
 The library is the core of the fdisk, cfdisk and sfdisk tools.

Package: libpipeline1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 63
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpipeline
Version: 1.4.0-1
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Description: pipeline manipulation library
 This is a C library for setting up and running pipelines of processes,
 without needing to involve shell command-line parsing which is often
 error-prone and insecure.
Homepage: http://libpipeline.nongnu.org/

Package: libpcre3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 618
Maintainer: Mark Baker <mark@mnb.org.uk>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.35-3.3+deb8u4
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the runtime libraries.

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 14249
Maintainer: Michael Stone <mstone@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 8.23-4
Replaces: mktemp, realpath, timeout
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.17), libselinux1 (>= 2.1.13)
Conflicts: timeout
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils

Package: libdns-export100
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1254
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: amd64
Source: bind9
Version: 1:9.9.5.dfsg-9+deb8u10
Depends: libc6 (>= 2.4), libisc-export95
Pre-Depends: multiarch-support
Description: Exported DNS Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libdns shared library.

Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1093
Maintainer: Debian iproute2 Maintainers <ah-iproute@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.16.0-2
Replaces: iproute
Provides: arpd
Depends: libc6 (>= 2.14), libdb5.3, libselinux1 (>= 2.0.15)
Recommends: libatm1 (>= 2.4.1-17~), libxtables10
Suggests: iproute2-doc
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
 /etc/iproute2/rt_protos 95ce0b4b5b79f5a8a45941fb418a904c
 /etc/iproute2/rt_dsfield 4264d5c7c8298300185aa04e1a736934
 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
 /etc/iproute2/ematch_map b91e7f9b26918449bade9573f8871d61
Description: networking and traffic control tools
 The iproute2 suite is a collection of utilities for networking and
 traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: http://www.linux-foundation.org/en/Net:Iproute2

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2781
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: foreign
Source: e2fsprogs (1.42.12-2)
Version: 1.42.12-2+b1
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Pre-Depends: e2fslibs (= 1.42.12-2+b1), libblkid1 (>= 2.17.2), libc6 (>= 2.14), libcomerr2 (>= 1.42~WIP-2011-10-05-1), libss2 (>= 1.34-1), libuuid1 (>= 2.16), util-linux (>= 2.15~rc1-1)
Suggests: gpart, parted, e2fsck-static
Conflicts: dump (<< 0.4b4-4), initscripts (<< 2.85-4), quota (<< 1.55-8.1), sysvinit (<< 2.85-4)
Conffiles:
 /etc/mke2fs.conf e2cdbf0620e93949af5857eb4739f949
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2261
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.27.1-2+deb8u1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: bzip2, ncompress, xz-utils, tar-scripts
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 114
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: bzip2 (1.0.6-7)
Version: 1.0.6-7+b3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: libkmod2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 134
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: kmod
Version: 18-3
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 371
Maintainer: Denis Roio <jaromil@dyne.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.26.2-6+devuan1
Depends: libc6 (>= 2.17), libuuid1 (>= 2.16)
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifying
 filesystems by hard-coded device names, but via a logical naming
 system instead.

Package: libtasn1-6
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 100
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 4.2-3+deb8u2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: http://www.gnu.org/software/libtasn1/

Package: sysvinit-core
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 238
Maintainer: Roger Leigh <rleigh@debian.org>
Architecture: amd64
Source: sysvinit
Version: 2.88dsf-59.2+devuan2
Replaces: systemd-sysv, sysvinit (<< 2.88dsf-44~), upstart
Depends: initscripts (>= 2.88dsf-13.3), sysv-rc | file-rc, sysvinit-utils (>= 2.86.ds1-66), libc6 (>= 2.14), libselinux1 (>= 1.32), libsepol1 (>= 1.14), debconf (>= 0.5) | debconf-2.0, debianutils (>= 4)
Conflicts: systemd-sysv, upstart
Description: System-V-like init utilities
 This package contains programs required for booting
 a Debian system and doing basic process management.
 .
 The most important program in the package is /sbin/init.
 It is the first process started on boot and continues
 to run as process number 1 until the system halts. All
 other processes are descended from it.
Homepage: https://git.devuan.org/packages-base/sysvinit

Package: isc-dhcp-client
Status: install ok unpacked
Priority: important
Section: net
Installed-Size: 561
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: amd64
Source: isc-dhcp
Version: 4.3.1-6+deb8u2
Provides: dhcp-client
Depends: libc6 (>= 2.15), libdns-export100, libirs-export91, libisc-export95, debianutils (>= 2.8.2), isc-dhcp-common (= 4.3.1-6+deb8u2), iproute2
Suggests: resolvconf, avahi-autoipd
Conffiles:
 /etc/dhcp/dhclient-enter-hooks.d/debug newconffile
 /etc/dhcp/dhclient-exit-hooks.d/debug newconffile
 /etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes newconffile
 /etc/dhcp/dhclient.conf newconffile
Description: DHCP client for automatically obtaining an IP address
 This is the Internet Software Consortium's DHCP client.
 .
 Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
 (actually dhcpd includes much of the functionality of bootpd). It
 gives client machines "leases" for IP addresses and can
 automatically set their network configuration. If your machine
 depends on DHCP (especially likely if it's a workstation on a large
 network, or a laptop, or attached to a cable modem), keep this or
 another DHCP client installed.
 .
 Extra documentation can be found in the package isc-dhcp-common.
Homepage: http://www.isc.org

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 72
Maintainer: Franco Lanza <nextime@devuan.org>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 4.1+devuan2
Description: Linux Standard Base 4.1 init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb

Package: procps
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 670
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2:3.3.9-9
Provides: watch
Depends: libc6 (>= 2.15), libncurses5 (>= 5.5-5~), libncursesw5 (>= 5.6+20070908), libprocps3, libtinfo5, lsb-base (>= 3.0-10), initscripts
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1), xmem (<= 1.20-27.1)
Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3)
Conffiles:
 /etc/init.d/procps 021482ebab1024f5ed76e650e5191e8f
 /etc/sysctl.conf 76c1d8285c578d5e827c3e07b9738112
 /etc/sysctl.d/README.sysctl 026e08987e39bd612ae311f2d9fc2089
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: http://gitorious.org/procps

Package: nano
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1667
Maintainer: Jordi Mallach <jordi@debian.org>
Architecture: amd64
Version: 2.2.6-3
Replaces: pico
Provides: editor
Depends: dpkg (>= 1.15.4) | install-info, libc6 (>= 2.14), libncursesw5 (>= 5.6+20070908), libtinfo5
Suggests: spell
Breaks: alpine-pico (<= 2.00+dfsg-5)
Conflicts: pico
Conffiles:
 /etc/nanorc fc57b93c907fefbccf12317d40b4a204
Description: small, friendly text editor inspired by Pico
 GNU nano is an easy-to-use text editor originally designed as a replacement
 for Pico, the ncurses-based editor from the non-free mailer package Pine
 (itself now available under the Apache License as Alpine).
 .
 However, nano also implements many features missing in pico, including:
  - feature toggles;
  - interactive search and replace (with regular expression support);
  - go to line (and column) command;
  - auto-indentation and color syntax-highlighting;
  - filename tab-completion and support for multiple buffers;
  - full internationalization support.
Homepage: http://www.nano-editor.org/

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 447
Maintainer: Franco (nextime) Lanza <nextime@devuan.org>
Architecture: amd64
Multi-Arch: foreign
Version: 8+devuan7
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/devuan_version 90e301dc00303665914b0d64d55d0457
 /etc/dpkg/origins/devuan 2912285696726f58ba63bd6af1bda365
 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
 /etc/issue fff5b23d1c9322d90a2d2ff76f1debc9
 /etc/issue.net 5487f7df520f45cbbe8c0a21d852205d
Description: Devuan base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Devuan system, and
 several important miscellaneous files, such as /etc/devuan_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others, and the text
 of several common licenses in use on Devuan systems.

Package: libgmp10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 556
Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.0.0+dfsg-6
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Multiprecision arithmetic library
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
 .
 It has a rich set of functions, and the functions have a regular
 interface.
Homepage: http://gmplib.org/

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 110
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0.9
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager

Package: libisc-export95
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 351
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: amd64
Source: bind9
Version: 1:9.9.5.dfsg-9+deb8u10
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Description: Exported ISC Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libisc shared library.

Package: devuan-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 80
Maintainer: Franco (nextime) Lanza <nextime@devuan.org>
Bugs: mailto:nextime@devuan.org
Architecture: all
Multi-Arch: foreign
Version: 2016.11.22
Depends: gpgv
Recommends: gnupg | gnupg1
Breaks: apt (<< 0.7.25.1)
Description: GnuPG archive key of the devuan repository
 The devuan repository digitally signs its Release files.
 This package contains the repository keys from devuan
 developers used for that.
Homepage: http://www.devuan.org

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2136
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.2-3+deb8u3
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules, debianutils (>= 2.15.2)
Conffiles:
 /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: http://pkg-shadow.alioth.debian.org/

Package: init-system-helpers
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 100
Maintainer: Daniel Reurich <daniel@centurion.net.nz>
Architecture: all
Multi-Arch: foreign
Version: 1.24+devuan1.0
Depends: perl-base (>= 5.20.1-3)
Breaks: systemd (<< 44-12)
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Devuan contains (e.g. sysvinit, upstart).
 .
 Maintainers of other init systems are welcome to include their helpers in this package, provided it doesn't try to take over the world.

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 371
Maintainer: Craig Small <csmall@debian.org>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 5.9+20140913-1
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conflicts: ncurses, ncurses-runtime
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: http://invisible-island.net/ncurses/

Package: libc-bin
Essential: yes
Status: install ok triggers-pending
Priority: required
Section: libs
Installed-Size: 3254
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.19-18+deb8u9
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: libc6 (>> 2.19), libc6 (<< 2.20)
Breaks: libc0.1 (<< 2.10), libc0.3 (<< 2.10), libc6 (<< 2.10), libc6.1 (<< 2.10)
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Triggers-Pending: ldconfig
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libsemanage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 245
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsemanage (2.3-1)
Version: 2.3-1+b1
Depends: libsemanage-common (= 2.3-1), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.14), libselinux1 (>= 2.1.12), libsepol1 (>= 2.1.4), libustr-1.0-1 (>= 1.0.4)
Pre-Depends: multiarch-support
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: sysvinit
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 150
Maintainer: Roger Leigh <rleigh@debian.org>
Architecture: amd64
Version: 2.88dsf-59.2+devuan2
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32), libsepol1 (>= 1.14)
Pre-Depends: init
Description: System-V-like init utilities - transitional package
 This package depends on init, which is an essential package that
 pulls in the default init system. Starting with jessie, this will be
 systemd on Linux. It facilitates a smooth transition and provides a
 fallback SysV init binary which can be used to boot the system via the
 init=/lib/sysvinit/init kernel command line parameter in case the
 system fails to start after the switch to systemd.
 .
 If your system successfully boots with systemd or if you have chosen
 to stick with sysvinit-core, this package can be removed safely.
Homepage: https://git.devuan.org/packages-base/sysvinit

Package: udev
Status: install ok unpacked
Priority: important
Section: admin
Installed-Size: 5924
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 215-17+deb8u7
Depends: libacl1 (>= 2.2.51-8), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libkmod2 (>= 5~), libselinux1 (>= 2.0.65), libudev1 (= 215-17+deb8u7), adduser, lsb-base (>= 3.0-6), util-linux (>= 2.16), procps
Pre-Depends: debconf (>= 1.4.69) | debconf-2.0
Breaks: consolekit (<< 0.4.6-1), kmod (<< 14), plymouth (<< 0.9.0-7), systemd (<< 215-1)
Conffiles:
 /etc/init.d/udev 988e81a81706a99e7f4b83988b386b00
 /etc/init.d/udev-finish fd3ce194c134bcd790681ea487b19126
 /etc/init/udev-fallback-graphics.conf b8bfe7164e10cd0e53494b243c5728b1
 /etc/init/udev-finish.conf 089140a32d519840674be9a274da1a42
 /etc/init/udev.conf 41c0081f3a830e0902aaff76a53edf98
 /etc/init/udevmonitor.conf b541dfb5aa4958e9a5336ecaec00ca15
 /etc/init/udevtrigger.conf 651ff2421dde80be7ce7ccbf7fa8cf18
 /etc/modprobe.d/fbdev-blacklist.conf newconffile
 /etc/udev/udev.conf newconffile
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: libnettle4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 331
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 2.7.1-5+deb8u2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: low level cryptographic library (symmetric and one-way cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the symmetric and one-way cryptographic
 algorithms. To avoid having this package depend on libgmp, the
 asymmetric cryptos reside in a separate library, libhogweed.
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: iptables
Status: install ok unpacked
Priority: important
Section: net
Installed-Size: 3557
Maintainer: Laurence J. Lane <ljlane@debian.org>
Architecture: amd64
Source: iptables (1.4.21-2)
Version: 1.4.21-2+b1
Depends: libc6 (>= 2.15), libnfnetlink0, libxtables10 (= 1.4.21-2+b1)
Description: administration tools for packet filtering and NAT
 iptables is the userspace command line program used to configure
 the Linux packet filtering ruleset. It is targeted towards system
 administrators. Since Network Address Translation is also configured
 from the packet filter ruleset, iptables is used for this, too. The
 iptables package also includes ip6tables. ip6tables is used for
 configuring the IPv6 packet filter
Homepage: http://www.netfilter.org/

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 149
Maintainer: Roger Leigh <rleigh@debian.org>
Architecture: amd64
Source: sysvinit
Version: 2.88dsf-59.2+devuan2
Replaces: last, sysvinit (<= 2.86.ds1-65)
Depends: libc6 (>= 2.14), startpar
Suggests: bootlogd, sash
Breaks: systemd (<< 215), upstart (<< 1.5-0ubuntu5), util-linux (<< 2.26.2-3)
Conflicts: chkconfig (<< 11.0-79.1-2), last, startpar (<< 0.58-2), sysvconfig
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, pidof, service
Homepage: https://git.devuan.org/packages-base/sysvinit

Package: debian-archive-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 108
Maintainer: Debian Release Team <packages@release.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2014.3
Depends: gpgv
Recommends: gnupg
Breaks: apt (<< 0.7.25.1)
Conffiles:
 /etc/apt/trusted.gpg.d/debian-archive-jessie-automatic.gpg 548a861c55fdf06fb9b0419c30cd33ec
 /etc/apt/trusted.gpg.d/debian-archive-jessie-security-automatic.gpg 28ffc0824518a9d42fb40e5caad7c5ef
 /etc/apt/trusted.gpg.d/debian-archive-jessie-stable.gpg 3cf5c69a2532cc3a3cba6c5bcf02cb7b
 /etc/apt/trusted.gpg.d/debian-archive-squeeze-automatic.gpg 342e9f6a4bd60ac4e3f1fe74dc46e844
 /etc/apt/trusted.gpg.d/debian-archive-squeeze-stable.gpg 2e662da7572ee5fe2e921c7b1de6e564
 /etc/apt/trusted.gpg.d/debian-archive-wheezy-automatic.gpg e5d3c1f7461bc12685f9b331c60beadd
 /etc/apt/trusted.gpg.d/debian-archive-wheezy-stable.gpg 722258fff5af68c002429c4433bd228b
Description: GnuPG archive keys of the Debian archive
 The Debian project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: libtext-iconv-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 92
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Source: libtext-iconv-perl (1.7-5)
Version: 1.7-5+b2
Depends: libc6 (>= 2.2.5), perl-base (>= 5.20.0-4), perlapi-5.20.0
Description: converts between character sets in Perl
 The iconv() family of functions from XPG4 defines an API for converting
 between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
 are provided by libc6.
 .
 This package allows access to them from Perl via the Text::Iconv
 package.
Homepage: http://search.cpan.org/search?module=Text::Iconv

Package: libapt-inst1.5
Status: install ok unpacked
Priority: important
Section: libs
Installed-Size: 352
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 1.0.9.8.4
Depends: libapt-pkg4.12 (>= 0.8.16~exp9), libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.4.0)
Pre-Depends: multiarch-support
Description: deb package format runtime library
 This library provides methods to query and extract information
 from deb packages. This includes the control data and the package
 file content.

Package: libtext-wrapi18n-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 28
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Version: 0.06-7
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
 This module is a substitution for Text::Wrap, supporting
 multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth
 characters such as east Asian characters, combining characters
 such as diacritical marks and Thai, and languages which don't
 use whitespaces between words such as Chinese and Japanese.
 .
 It provides wrap().
Homepage: http://search.cpan.org/search?module=Text::WrapI18N

Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 2.3-1
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Conffiles:
 /etc/selinux/semanage.conf e69d42a4d98a93c3b8e201bdda367c55
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: libp11-kit0
Status: install ok unpacked
Priority: standard
Section: libs
Installed-Size: 299
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: p11-kit
Version: 0.20.7-1
Depends: libc6 (>= 2.16), libffi6 (>= 3.0.4)
Pre-Depends: multiarch-support
Description: Library for loading and coordinating access to PKCS#11 modules - runtime
 Provides a way to load and enumerate PKCS#11 modules. Provides a standard
 configuration setup for installing PKCS#11 modules in such a way that
 they're discoverable.
 .
 Also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the shared library required for applications loading
 and accessing PKCS#11 modules.
Homepage: http://p11-glue.freedesktop.org/p11-kit.html

Package: libgnutls-openssl27
Status: install ok unpacked
Priority: standard
Section: libs
Installed-Size: 174
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.3.8-6+deb8u5
Depends: libgnutls-deb0-28 (= 3.3.8-6+deb8u5), libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: GNU TLS library - OpenSSL wrapper
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - TLS extensions: server name indication, max record size, opaque PRF
    input, etc.
  - authentication using the SRP protocol.
  - authentication using both X.509 certificates and OpenPGP keys.
  - TLS Pre-Shared-Keys (PSK) extension.
  - Inner Application (TLS/IA) extension.
  - X.509 and OpenPGP certificate handling.
  - X.509 Proxy Certificates (RFC 3820).
  - all the strong encryption algorithms (including SHA-256/384/512 and
    Camellia (RFC 4132)).
 .
 This package contains the runtime library of the GnuTLS OpenSSL wrapper.
Homepage: http://www.gnutls.org/

Package: libdebconfclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.192
Depends: libc6 (>= 2.2.5)
Pre-Depends: multiarch-support
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. This is a reimplementation of the original debconf version
 in C.
 .
 This is the libraries needed by libdebconfclient-dev and cdebconf.

Package: libgnutls-deb0-28
Status: install ok unpacked
Priority: standard
Section: libs
Installed-Size: 1811
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.3.8-6+deb8u5
Replaces: gnutls0, gnutls0.4, gnutls3
Depends: libc6 (>= 2.17), libgmp10 (>= 2:6), libhogweed2 (>= 2.7), libnettle4 (>= 2.7), libp11-kit0 (>= 0.20.7), libtasn1-6 (>= 4.1-0), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Suggests: gnutls-bin
Conflicts: gnutls0, gnutls0.4
Description: GNU TLS library - main runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - TLS extensions: server name indication, max record size, opaque PRF
    input, etc.
  - authentication using the SRP protocol.
  - authentication using both X.509 certificates and OpenPGP keys.
  - TLS Pre-Shared-Keys (PSK) extension.
  - Inner Application (TLS/IA) extension.
  - X.509 and OpenPGP certificate handling.
  - X.509 Proxy Certificates (RFC 3820).
  - all the strong encryption algorithms (including SHA-256/384/512 and
    Camellia (RFC 4132)).
 .
 This package contains the main runtime library.
Homepage: http://www.gnutls.org/

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 213
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libselinux
Version: 2.3-2
Depends: libc6 (>= 2.14), libpcre3 (>= 8.10)
Pre-Depends: multiarch-support
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Homepage: http://userspace.selinuxproject.org/

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6643
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: amd64
Multi-Arch: foreign
Version: 1.17.27
Replaces: manpages-it (<< 2.80-4)
Pre-Depends: libbz2-1.0, libc6 (>= 2.14), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 2.3), zlib1g (>= 1:1.1.4), tar (>= 1.23)
Suggests: apt
Breaks: apt (<< 0.7.7~), apt-cudf (<< 3.3~beta1-3~), aptitude (<< 0.4.7-1~), auctex (<< 11.87-3+deb8u1~), ccache (<< 3.1.10-1~), cups (<< 1.7.5-10~), debian-security-support (<< 2014.10.26~), distcc (<< 3.1-6.1~), doc-base (<< 0.10.5~), dpkg-dev (<< 1.15.8), fontconfig (<< 2.11.0-6.2~), fusionforge-plugin-mediawiki (<< 5.3.2+20141104-3~), gap-core (<< 4r7p5-2~), gitweb (<< 1:2.1.4-2.1~), grace (<< 1:5.1.24-3~), gxine (<< 0.5.908-3.1~), hoogle (<< 4.2.33-4~), icecc (<< 1.0.1-2~), install-info (<< 5.1.dfsg.1-3~), libapache2-mod-php5 (<< 5.6.4+dfsg-3~), libapache2-mod-php5filter (<< 5.6.4+dfsg-3~), libdpkg-perl (<< 1.15.8), libjs-protoaculous (<< 5~), man-db (<< 2.6.3-6~), mcollective (<< 2.6.0+dfsg-2.1~), php5-fpm (<< 5.6.4+dfsg-3~), pypy (<< 2.4.0+dfsg-3~), readahead-fedora (<< 2:1.5.6-5.2~), wordpress (<< 4.1+dfsg-1~), xfonts-traditional (<< 1.7~), xine-ui (<< 0.99.9-1.2~)
Conflicts: ada-mode (<< 3.6-3+rm), ada-reference-manual (<< 20021112web-4~), asn1-mode (<< 2.7-7~), bogosort (<< 0.4.2-3~), cl-yacc (<< 0.3-3~), cpp-4.1-doc (<< 4.1.2.nf2-4~), cpp-4.2-doc (<< 4.2.4.nf1-4~), gcc-4.1-doc (<< 4.1.2.nf2-4~), gcc-4.2-doc (<< 4.2.4.nf1-4~), gcj-4.1-doc (<< 4.1.2.nf2-4~), gcj-4.2-doc (<< 4.2.4.nf1-4~), gfortran-4.1-doc (<< 4.1.2.nf2-4~), gfortran-4.2-doc (<< 4.2.4.nf1-4~), ggz-docs (<< 0.0.14.1-2~), glame (<< 2.0.1-6~), gnat-4.1-doc (<< 4.1.2.nf2-4~), gnat-4.2-doc (<< 4.2.4.nf1-4~), gtalk (<< 0.99.10-16~), libalogg-dev (<< 1.3.7-2~), libgtk1.2-doc (<< 1.2.10-19~), libnettle-dev (<< 2~), liborbit-dev (<< 0.5.17-12~), libreadline5-dev (<< 5.2-8~), librep-doc (<< 0.90~), mmucl (<< 1.5.2-3~), nxml-mode (<< 20041004-9~), octave2.1-info (<< 1:2.1.73-19+rm), octave3.0-info (<< 1:3.0.5-7+rm), octave3.2-info (<< 3.2.4-12+rm), polgen-doc (<< 1.3-3+rm), r6rs-doc (<< 1.0-2~), serveez-doc (<< 0.1.5-3~), slat (<< 2.0-6~), texlive-base-bin-doc (<< 2007.dfsg.2-9~), ttcn-el (<< 0.6.9-2~), ulog-acctd (<< 0.4.3-3~), xconq-doc (<< 7.4.1-5~), zenirc (<< 2.112.dfsg-1~)
Conffiles:
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/cron.daily/dpkg b8065b6bfc248caba501c3f5bb508e66
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: wget
Status: install ok unpacked
Priority: important
Section: web
Installed-Size: 1725
Maintainer: Noël Köthe <noel@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.16-1+deb8u2
Depends: libc6 (>= 2.17), libgnutls-deb0-28 (>= 3.3.0), libidn11 (>= 1.13), libnettle4, libpsl0 (>= 0.4.0), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: wget-ssl
Conffiles:
 /etc/wgetrc newconffile
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the web
 using HTTP(S) and FTP, the two most widely used internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as FTP
 sites -- you can use Wget to make mirrors of archives and
 home pages or to travel the web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both HTTP and FTP) that support it. Both HTTP and FTP
 retrievals can be time stamped, so Wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
Homepage: http://www.gnu.org/software/wget/

Package: vim-common
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 405
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: vim
Version: 2:7.4.488-7+deb8u3
Replaces: vim-gui-common (<< 2:7.4.488-4~)
Depends: libc6 (>= 2.3.4)
Recommends: vim | vim-gnome | vim-gtk | vim-athena | vim-nox | vim-tiny
Breaks: vim-gui-common (<< 2:7.4.488-4~)
Conffiles:
 /etc/vim/vimrc 5fd31a932a5738dd87418b1b201dcf7c
Description: Vi IMproved - Common files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 Many new features have been added: multi level undo, syntax
 highlighting, command line history, on-line help, filename
 completion, block operations, folding, Unicode support, etc.
 .
 This package contains files shared by all non GUI-enabled vim
 variants (vim and vim-tiny currently) available in Debian.
 Examples of such shared files are: manpages, common executables
 like xxd, and configuration files.
Homepage: http://www.vim.org/

Package: sysv-rc
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 223
Maintainer: Roger Leigh <rleigh@debian.org>
Architecture: all
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.2+devuan2
Replaces: file-rc
Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10), startpar
Recommends: lsb-base (>= 3.2-14)
Suggests: bum
Breaks: initscripts (<< 2.86.ds1-63)
Conflicts: file-rc
Description: System-V-like runlevel change mechanism
 This package provides support for the System-V like system
 for booting, changing runlevels, and shutting down,
 configured through symbolic links in /etc/rc?.d/.
Homepage: https://git.devuan.org/packages-base/sysvinit

Package: tasksel-data
Status: install ok unpacked
Priority: important
Section: admin
Installed-Size: 543
Maintainer: Daniel Reurich <daniel@centurion.net.nz
Architecture: all
Source: tasksel
Version: 3.33+devuan1.0
Depends: tasksel (= 3.33+devuan1.0)
Recommends: laptop-detect
Conflicts: tasksel (<< 2.67)
Description: official tasks used for installation of Devuan systems
 This package contains data about the standard tasks available on a Devuan
 system.

Package: apt
Status: install ok unpacked
Priority: important
Section: admin
Installed-Size: 3178
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Version: 1.0.9.8.4
Replaces: manpages-it (<< 2.80-4~), manpages-pl (<< 20060617-3~), openjdk-6-jdk (<< 6b24-1.11-0ubuntu1~), sun-java5-jdk (>> 0), sun-java6-jdk (>> 0)
Depends: libapt-pkg4.12 (>= 1.0.9.8.4), libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.9), debian-archive-keyring, gnupg
Suggests: aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), apt-doc, python-apt
Breaks: manpages-it (<< 2.80-4~), manpages-pl (<< 20060617-3~), openjdk-6-jdk (<< 6b24-1.11-0ubuntu1~), sun-java5-jdk (>> 0), sun-java6-jdk (>> 0)
Conflicts: python-apt (<< 0.7.93.2~)
Conffiles:
 /etc/apt/apt.conf.d/01autoremove newconffile
 /etc/cron.daily/apt newconffile
 /etc/kernel/postinst.d/apt-auto-removal newconffile
 /etc/logrotate.d/apt newconffile
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys

Package: liblocale-gettext-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 37
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: liblocale-gettext-perl (1.05-8)
Version: 1.05-8+b1
Depends: libc6 (>= 2.2.5)
Pre-Depends: perl-base (>= 5.20.0-4), perlapi-5.20.0
Description: module using libc functions for internationalization in Perl
 The gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().
Homepage: https://metacpan.org/release/gettext

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 950
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Source: diffutils (1:3.3-1)
Version: 1:3.3-1+b1
Replaces: diff
Pre-Depends: libc6 (>= 2.17)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: http://www.gnu.org/software/diffutils/

Package: man-db
Status: install ok unpacked
Priority: important
Section: doc
Installed-Size: 2514
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.7.0.2-5
Replaces: man, manpages-de (<< 0.5-4), manpages-zh (<< 1.5.2-1.1), nlsutils
Provides: man, man-browser
Depends: groff-base (>= 1.18.1.1-15), bsdmainutils, debconf (>= 1.2.0) | debconf-2.0, libc6 (>= 2.17), libgdbm3 (>= 1.8.3), libpipeline1 (>= 1.3.0), zlib1g (>= 1:1.1.4)
Pre-Depends: dpkg (>= 1.16.1~)
Suggests: groff, less, www-browser
Breaks: manpages-zh (<< 1.5.2-1.1)
Conflicts: man, suidmanager (<< 0.50)
Conffiles:
 /etc/cron.daily/man-db newconffile
 /etc/cron.weekly/man-db newconffile
 /etc/manpath.config newconffile
Description: on-line manual pager
 This package provides the man command, the primary way of examining the
 on-line help files (manual pages). Other utilities provided include the
 whatis and apropos commands for searching the manual page database, the
 manpath utility for determining the manual page search path, and the
 maintenance utilities mandb, catman and zsoelim. man-db uses the groff
 suite of programs to format and display the manual pages.
Homepage: http://man-db.nongnu.org/

Package: devuan-baseconf
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 47
Maintainer: Franco (nextime) Lanza <nextime@devuan.org>
Architecture: all
Version: 0.6.4+devuan1.3
Conffiles:
 /etc/apt/apt.conf.d/05disable-suggests 90c138f1eb35a1f98b90419503950211
 /etc/apt/preferences.d/avoid-systemd 5d6744f56dbbee3da16fe1e1865856a5
Description: Devuan base config files
 Devuan base apt config files provide apt pinning to use sysvinit-core by
 default instead of systemd-sysv and to give higher preference to devuan
 repositories.
Homepage: http://www.devuan.org

Package: libnfnetlink0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 61
Maintainer: Alexander Wirt <formorer@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnfnetlink
Version: 1.0.1-3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Netfilter netlink library
 libnfnetlink is the low-level library for netfilter related
 kernel/userspace communication. It provides a generic messaging
 infrastructure for in-kernel netfilter subsystems (such as
 nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their
 respective users and/or management tools in userspace.

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 860
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.1+deb8u2
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.15), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.1+deb8u2)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005
 /etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89
 /etc/security/namespace.init b46b23d64860d1557d2a8f44b231fd54
 /etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://pam.sourceforge.net/

Package: insserv
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 183
Maintainer: Petter Reinholdtsen <pere@debian.org>
Architecture: amd64
Version: 1.14.0-5
Depends: libc6 (>= 2.7)
Suggests: bootchart2
Breaks: sysv-rc (<< 2.87dsf-3)
Conffiles:
 /etc/bash_completion.d/insserv 32975fe14795d6fce1408d5fd22747fd
 /etc/insserv.conf b15785c0c4b022a3ba0edb78ba71297c
Description: boot sequence organizer using LSB init.d script dependency information
 The insserv program is used by the standard SysV-based init system. It
 updates the order of symlinks in /etc/rc?.d/ based on dependencies
 specified by LSB headers in the init.d scripts themselves.
 .
 These declared relations between scripts make it possible to optimize
 the boot sequence for the currently installed set of packages, while
 detecting and rejecting dependency loops.
 .
 Using insserv incorrectly can result in an unbootable system.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1319
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-4.9
Version: 4.9.2-10
Replaces: libstdc++6-4.9-dbg (<< 4.9.0-3)
Depends: gcc-4.9-base (= 4.9.2-10), libc6 (>= 2.18), libgcc1 (>= 1:4.1.1)
Pre-Depends: multiarch-support
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: gcc-4.9-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 218
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-4.9
Version: 4.9.2-10
Breaks: dehydra (<= 0.9.hg20110609-2), gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: libffi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libffi (3.1-2)
Version: 3.1-2+b2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.

Package: libaudit-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 49
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:2.4-1
Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2)
Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2)
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: http://people.redhat.com/sgrubb/audit/

Package: libtext-charwidth-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 85
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Source: libtext-charwidth-perl (0.04-7)
Version: 0.04-7+b3
Depends: libc6 (>= 2.2.5), perl-base (>= 5.20.0-4), perlapi-5.20.0
Description: get display widths of characters on the terminal
 This module permits perl software to get the display widths of characters
 and strings on the terminal, using wcwidth() and wcswidth() from libc.
 .
 It provides mbwidth(), mbswidth(), and mblen().
Homepage: http://search.cpan.org/search?module=Text::CharWidth

Package: libcomerr2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 69
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.42.12-2)
Version: 1.42.12-2+b1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1406
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: findutils (4.4.2-9)
Version: 4.4.2-9+b1
Pre-Depends: libc6 (>= 2.17)
Suggests: mlocate | locate
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: http://savannah.gnu.org/projects/findutils/

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 252
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.1+deb8u2
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://pam.sourceforge.net/

Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 402
Maintainer: Denis Roio <jaromil@dyne.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.26.2-6+devuan1
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libselinux1 (>= 1.32)
Description: device mounting library
 The device mounting library, used by mount and umount helpers.

Package: libnewt0.52
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 171
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: newt (0.52.17-1)
Version: 0.52.17-1+b1
Depends: libc6 (>= 2.15), libslang2 (>= 2.2.4)
Pre-Depends: multiarch-support
Recommends: libfribidi0
Conffiles:
 /etc/newt/palette.original d41d8cd98f00b204e9800998ecf8427e
Description: Not Erik's Windowing Toolkit - text mode windowing with slang
 Newt is a windowing toolkit for text mode built from the slang library.
 It allows color text mode applications to easily use stackable windows,
 push buttons, check boxes, radio buttons, lists, entry fields, labels,
 and displayable text. Scrollbars are supported, and forms may be nested
 to provide extra functionality. This package contains the shared library
 for programs that have been built with newt.
Homepage: https://fedorahosted.org/newt/

Package: bsdmainutils
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 571
Maintainer: Debian Bsdmainutils Team <pkg-bsdmainutils@teams.debian.net>
Architecture: amd64
Multi-Arch: foreign
Version: 9.0.6
Depends: libc6 (>= 2.14), libncurses5 (>= 5.5-5~), libtinfo5, bsdutils (>= 3.0-0), debianutils (>= 1.8)
Suggests: cpp, wamerican | wordlist, whois, vacation
Breaks: bsdutils (<< 1:2.13-11)
Conffiles:
 /etc/calendar/default f499e79b0d2d685aa5ae7e1013940b96
 /etc/cron.daily/bsdmainutils 559387f792462a62e3efb1d573e38d11
 /etc/default/bsdmainutils bded239f4fea461cc5c92c3bd5a28cc9
Description: collection of more utilities from FreeBSD
 This package contains lots of small programs many people expect to find when
 they use a BSD-style Unix system.
 .
 It provides banner (as printerbanner), calendar, col, colcrt, colrm, column,
 from (as bsd-from), hexdump (or hd), look, lorder, ncal (or cal), ul, and
 write (as bsd-write).
 .
 This package used to contain whois and vacation, which are now distributed in
 their own packages. Also here was tsort, which is now in the "coreutils"
 package.

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2185
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Source: shadow
Version: 1:4.2-3+deb8u3
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules (>= 1.1.8-1)
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs c8e7f89a2c5665cf75a760d4341ce2d2
 /etc/pam.d/login 8cc9269fe679cb725d55925e95914499
 /etc/pam.d/su ce6dcfda3b190a27a455bb38a45ff34a
 /etc/securetty d9e5bf5e6bfa00ddd273a3bcf1a49bec
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: http://pkg-shadow.alioth.debian.org/

Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 784
Maintainer: net-tools Team <pkg-net-tools-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: net-tools (1.60-26)
Version: 1.60-26+b1
Replaces: ja-trans (<= 0.8-2), netbase (<< 4.00)
Depends: libc6 (>= 2.14)
Conflicts: ja-trans (<= 0.8-2)
Description: NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach,
 mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".
Homepage: http://net-tools.berlios.de/

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1066
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.113+nmu3
Replaces: manpages-it (<< 0.3.4-2), manpages-pl (<= 20051117-1)
Depends: perl-base (>= 5.6.0), passwd (>= 1:4.0.12), debconf | debconf-2.0
Suggests: liblocale-gettext-perl, perl-modules
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/

Package: initscripts
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 260
Maintainer: Roger Leigh <rleigh@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.2+devuan2
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: mount (>= 2.11x-1), debianutils (>= 4), lsb-base (>= 3.2-14), sysvinit-utils (>= 2.88dsf-50), sysv-rc | file-rc, coreutils (>= 5.93)
Recommends: psmisc, e2fsprogs
Breaks: aide (<< 0.15.1-5), atm-tools (<< 1:2.5.1-1.3), autofs (<< 5.0.0), bootchart (<< 0.10~svn407-4), console-common (<< 0.7.86), console-setup (<< 1.74), cruft (<< 0.9.16), eepc-acpi-scripts (<< 1.1.12), fcheck (<< 2.7.59-16), hostapd (<< 1:0.7.3-3), hurd (<< 0.5.git20131101~), ifupdown (<< 0.7.46), initramfs-tools (<< 0.104), libpam-mount (<< 2.13-1), live-build (<< 3.0~a26-1), ltsp-client-core (<< 5.2.16-1), mdadm (<< 3.2.2-1), nbd-client (<< 1:2.9.23-1), nfs-common (<< 1:1.2.5-3), portmap (<< 6.0.0-2), readahead-fedora (<< 2:1.5.6-3), resolvconf (<< 1.49), rpcbind (<< 0.2.0-7), rsyslog (<< 5.8.2-2), selinux-policy-default (<= 2:0.2.20100524-9), splashy (<< 0.3.13-5.1+b1), sysklogd (<< 1.5-6.2), util-linux (<< 2.26.2-4~), wpasupplicant (<< 0.7.3-4), xymon (<< 4.3.0~beta2.dfsg-9)
Conflicts: libdevmapper1.02.1 (<< 2:1.02.24-1)
Conffiles:
 /etc/init.d/bootlogs 41ad826ad3091964c994b03177bbc29b
 /etc/init.d/bootmisc.sh 7e77260cb4071c21a99d581bfb8d2b74
 /etc/init.d/checkfs.sh 8cd37d9296845ce642e5671198469c32
 /etc/init.d/checkroot.sh 9c6f18f6f6b09ce96175bbbc5aaa8c99
 /etc/init.d/checkroot-bootclean.sh 955dcf4da7378f9f981d3f04c94d36d7
 /etc/init.d/halt a0e668699f774d928ddc62954155adb5
 /etc/init.d/hostname.sh 2180072dbb4e2f42f7ad4df4a2f9888d
 /etc/init.d/killprocs 9866a64a5d3d34552b0c36f5667cdacd
 /etc/init.d/motd dbc3f882af04254005bb96e4f780e5a0
 /etc/init.d/mountall.sh 7dc50e51261550184c078955c01b5628
 /etc/init.d/mountall-bootclean.sh 4c6b07a64798d8d78783e271238511f4
 /etc/init.d/mountnfs.sh a33d7b1a4d5043ea997af1f44c600cb9
 /etc/init.d/mountnfs-bootclean.sh 68aeda71fd9ae6861c3859c4ac33ee62
 /etc/init.d/mountdevsubfs.sh c18f4495f67dec33e257946215f54508
 /etc/init.d/mountkernfs.sh 12a99beb128e18bb6b277882233545af
 /etc/init.d/rc.local 7d505630f083ddc543cb68fbeb83a6b5
 /etc/init.d/reboot 39ce57bc053ad1bf9861347927d7db6b
 /etc/init.d/rmnologin eb11c47dd70b51a6e0d927f50490965e
 /etc/init.d/sendsigs 617e0ce4756cd2ac0c53634c4667fe22
 /etc/init.d/single bc7e38f0849ebfe767d162861fae002c
 /etc/init.d/umountfs 49f742a0f5af8124caba6c4264e78aa6
 /etc/init.d/umountnfs.sh 5137d5524cdba56d07e61c1cd5bb7238
 /etc/init.d/umountroot 57c8e9e95211ab355591dc8c211c8e8f
 /etc/init.d/urandom e6454386bfce38efb5987dd06cb3b21d
 /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
 /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a
 /etc/default/rcS a4af750cc5d1edc264d47dc01d11e1b8
 /etc/default/tmpfs 9af2949a1c0373adfa0c7db2453eee62
 /etc/network/if-up.d/mountnfs 528b2efd88285d2f443fcf54234b5156
Description: scripts for initializing and shutting down the system
 The scripts in this package initialize a standard Debian
 system at boot time and shut it down at halt or reboot time.
Homepage: https://git.devuan.org/packages-base/sysvinit

Package: libnetfilter-acct1
Status: install ok unpacked
Priority: extra
Section: libs
Installed-Size: 14
Maintainer: Laurence J. Lane <ljlane@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnetfilter-acct
Version: 1.0.2-1.1
Depends: libc6 (>= 2.4), libmnl0 (>= 1.0.3-4~)
Pre-Depends: multiarch-support
Description: Netfilter acct library
 libnetfilter_acct is a userspace library providing an interface to the
 extended netfilter accounting infrastructure.
Homepage: http://www.netfilter.org/projects/libnetfilter_acct/

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 80
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: acl
Version: 2.2.52-2
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14)
Pre-Depends: multiarch-support
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 535
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: ncurses (5.9+20140913-1)
Version: 5.9+20140913-1+b1
Pre-Depends: libc6 (>= 2.14), libtinfo5 (>= 5.9+20130119)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: http://invisible-island.net/ncurses/

Package: libslang2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1543
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: slang2
Version: 2.3.0-2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Recommends: libpng12-0
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Built-Using: unicode-data (= 7.0-2)
Homepage: http://www.jedsoft.org/slang/

Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 194
Maintainer: Javier Fernández-Sanguino Peña <jfs@debian.org>
Architecture: amd64
Version: 3.0pl1-127+deb8u1
Provides: cron-daemon
Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), init-system-helpers (>= 1.18~), debianutils (>= 1.7), adduser, lsb-base (>= 3.0-10), libpam-runtime (>= 1.0.1-11)
Pre-Depends: dpkg (>= 1.15.7.2)
Recommends: exim4 | postfix | mail-transport-agent
Suggests: anacron (>= 2.0-1), logrotate, checksecurity
Breaks: dpkg (<< 1.15.4)
Conffiles:
 /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/crontab 8f111d100ea459f68d333d63a8ef2205
 /etc/default/cron eae0d979b5007d2af41540d8c2631359
 /etc/init.d/cron 85d7a3783889ea93dcda2fb488420c1c
 /etc/pam.d/cron 11e788a7f7cd5477b10da2c7fd5ecdf0
Description: process scheduling daemon
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package does not provide any system maintenance tasks. Basic
 periodic maintenance tasks are provided by other packages, such
 as checksecurity.
Homepage: http://ftp.isc.org/isc/cron/

Package: libmnl0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 60
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libmnl
Version: 1.0.3-5
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: minimalistic Netlink communication library
 libmnl is a minimalistic user-space library oriented to Netlink developers.
 There are a lot of common tasks in parsing, validating, constructing of
 both the Netlink header and TLVs that are repetitive and easy to get wrong.
 This library aims to provide simple helpers that allows you to re-use code
 and to avoid re-inventing the wheel.
 .
 The main features of this library are:
 .
 Small: the shared library requires around 30KB for an x86-based computer.
 .
 Simple: this library avoids complexity and elaborated abstractions that
 tend to hide Netlink details.
 .
 Easy to use: the library simplifies the work for Netlink-wise developers.
 It provides functions to make socket handling, message building,
 validating, parsing and sequence tracking, easier.
 .
 Easy to re-use: you can use the library to build your own abstraction
 layer on top of this library.
 .
 Decoupling: the interdependency of the main bricks that compose the
 library is reduced, i.e. the library provides many helpers, but the
 programmer is not forced to use them.
 .
 This package contains the shared libraries needed to run programs that use
 the minimalistic Netlink communication library.
Homepage: http://netfilter.org/projects/libmnl/

Package: libapt-pkg4.12
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2664
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 1.0.9.8.4
Depends: libbz2-1.0, libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 4.9), zlib1g (>= 1:1.2.2.3)
Pre-Depends: multiarch-support
Breaks: apt (<< 0.9.4~), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http, rsh as well as an interface to add more transports like
    https (apt-transport-https) and debtorrent (apt-transport-debtorrent).

Package: libusb-0.1-4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 42
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libusb
Version: 2:0.1.12-25
Replaces: libusb-dev (<< 2:0.1.12-25)
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
Homepage: http://www.linux-usb.org/

Package: traceroute
Status: install ok installed
Priority: important
Section: net
Installed-Size: 127
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Source: traceroute (1:2.0.20-2)
Version: 1:2.0.20-2+b1
Depends: libc6 (>= 2.14)
Description: Traces the route taken by packets over an IPv4/IPv6 network
 The traceroute utility displays the route used by IP packets on their way to a
 specified network (or Internet) host. Traceroute displays the IP number and
 host name (if possible) of the machines along the route taken by the packets.
 Traceroute is used as a network debugging tool. If you're having network
 connectivity problems, traceroute will show you where the trouble is coming
 from along the route.
 .
 Install traceroute if you need a tool for diagnosing network connectivity
 problems.
Homepage: http://traceroute.sourceforge.net/

Package: logrotate
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 91
Maintainer: Paul Martin <pm@debian.org>
Architecture: amd64
Source: logrotate (3.8.7-1)
Version: 3.8.7-1+b1
Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.14), libpopt0 (>= 1.14), libselinux1 (>= 1.32), cron | anacron | cron-daemon, base-passwd (>= 2.0.3.4)
Recommends: mailx
Breaks: postgresql-common (<= 126)
Conffiles:
 /etc/cron.daily/logrotate d2281ecb6f898b446ac8a5984ab5a243
 /etc/logrotate.conf 176edd439a499501372cf3d04e795810
Description: Log rotation utility
 The logrotate utility is designed to simplify the administration of
 log files on a system which generates a lot of log files.  Logrotate
 allows for the automatic rotation compression, removal and mailing of
 log files.  Logrotate can be set to handle a log file daily, weekly,
 monthly or when the log file gets to a certain size.  Normally, logrotate
 runs as a daily cron job.
Homepage: https://fedorahosted.org/logrotate/

Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 339
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 2.3-2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: http://userspace.selinuxproject.org/

Package: libidn11
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 319
Maintainer: Debian Libidn Team <help-libidn@gnu.org>
Architecture: amd64
Multi-Arch: same
Source: libidn
Version: 1.29-1+deb8u2
Replaces: libidn11-dev
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Conflicts: libidn9-dev
Description: GNU Libidn library, implementation of IETF IDN specifications
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libidn/

Package: rsyslog
Status: install ok unpacked
Priority: important
Section: admin
Installed-Size: 1834
Maintainer: Michael Biebl <biebl@debian.org>
Architecture: amd64
Version: 8.4.2-1+deb8u2
Provides: linux-kernel-log-daemon, system-log-daemon
Depends: libc6 (>= 2.17), libestr0 (>= 0.1.4), libjson-c2 (>= 0.10), liblogging-stdlog0 (>= 1.0.2), liblognorm1 (>= 0.3.0), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4), init-system-helpers (>= 1.18~), lsb-base (>= 3.2-14), initscripts (>= 2.88dsf-13.3)
Recommends: logrotate
Suggests: rsyslog-mysql | rsyslog-pgsql, rsyslog-mongodb, rsyslog-doc, rsyslog-gnutls, rsyslog-gssapi, rsyslog-relp
Conflicts: linux-kernel-log-daemon, system-log-daemon
Conffiles:
 /etc/default/rsyslog newconffile
 /etc/init.d/rsyslog newconffile
 /etc/logcheck/ignore.d.server/rsyslog newconffile
 /etc/logrotate.d/rsyslog newconffile
 /etc/rsyslog.conf newconffile
Description: reliable system and kernel logging daemon
 Rsyslog is a multi-threaded implementation of syslogd (a system utility
 providing support for message logging), with features that include:
  * reliable syslog over TCP, SSL/TLS and RELP
  * on-demand disk buffering
  * email alerting
  * writing to MySQL or PostgreSQL databases (via separate output plugins)
  * permitted sender lists
  * filtering on any part of the syslog message
  * on-the-wire message compression
  * fine-grained output format control
  * failover to backup destinations
  * enterprise-class encrypted syslog relaying
 .
 It is the default syslogd on Debian systems.
Homepage: http://www.rsyslog.com/

Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 129
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-4.9 (4.9.2-10)
Version: 1:4.9.2-10
Depends: gcc-4.9-base (= 4.9.2-10), libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/

Package: libreadline6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 419
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: readline6 (6.3-8)
Version: 6.3-8+b3
Depends: readline-common, libc6 (>= 2.15), libtinfo5
Pre-Depends: multiarch-support
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 4804
Maintainer: Denis Roio <jaromil@dyne.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.26.2-6+devuan1
Replaces: bash-completion (<< 1:2.1-4.1~), initscripts (<< 2.88dsf-59.2~), mount (= 2.26.2-3), mount (= 2.26.2-3ubuntu1), sysvinit-utils (<< 2.88dsf-59.1~)
Depends: initscripts (>= 2.88dsf-59.2~), lsb-base (>= 3.0-6), tzdata (>= 2006c-2), sysvinit-utils (>> 2.88dsf-59.1~)
Pre-Depends: libblkid1 (>= 2.25), libc6 (>= 2.17), libfdisk1 (>= 2.26.2), libmount1 (>= 2.25), libncurses5 (>= 5.5-5~), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libslang2 (>= 2.2.4), libsmartcols1 (>= 2.25), libtinfo5, libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd | console-tools, util-linux-locales
Breaks: bash-completion (<< 1:2.1-4.1~), cloud-utils (<< 0.27-1~), grml-debootstrap (<< 0.68), mount (= 2.26.2-3), mount (= 2.26.2-3ubuntu1)
Conffiles:
 /etc/default/hwclock 3916544450533eca69131f894db0ca12
 /etc/init.d/hwclock.sh b5ca46c0c11ace2a1e40217c29646bf2
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l da714d1ef1b85471f3bb1a83daa7a88b
Description: Miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system.  Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.

Package: libustr-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 287
Maintainer: Vaclav Ovsik <vaclav.ovsik@i.cz>
Architecture: amd64
Multi-Arch: same
Source: ustr (1.0.4-3)
Version: 1.0.4-3+b2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Micro string library: shared library
 ustr (Micro string library) is a string API for C. It has tiny overhead over
 just plain strdup(), is much safer, is easier to use, is faster for many
 operations, can be used with read-only or automatically allocated data. You
 don't even need to link to the library to use it (so there are no
 dependencies).
 .
 This package contains the shared library for ustr.
Homepage: http://www.and.org/ustr/

Package: tasksel
Status: install ok unpacked
Priority: important
Section: admin
Installed-Size: 719
Maintainer: Daniel Reurich <daniel@centurion.net.nz
Architecture: all
Version: 3.33+devuan1.0
Depends: debconf (>= 0.5) | debconf-2.0, liblocale-gettext-perl, apt, tasksel-data, perl-base (>= 5.14.0-1)
Pre-Depends: debconf (>= 1.5.34) | cdebconf (>= 0.106)
Conflicts: base-config (<< 2.32), debconf (<< 1.4.27)
Description: tool for selecting tasks for installation on Devuan systems
 This package provides 'tasksel', a simple interface for users who
 want to configure their system to perform a specific task.

Package: libjson-c2
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 88
Maintainer: fabien boucher <fabien.dot.boucher@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: json-c
Version: 0.11-4
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: JSON manipulation library - shared library
 This library allows you to easily construct JSON objects in C,
 output them as JSON formatted strings and parse JSON formatted
 strings back into the C representation of JSON objects.
Homepage: https://github.com/json-c/json-c/wiki

Package: libicu52
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 27364
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 52.1-8+deb8u5
Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.9)
Pre-Depends: multiarch-support
Description: International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support.  This package contains the runtime
 libraries for ICU.
Homepage: http://www.icu-project.org

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 575
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Version: 4.2.2-4+deb8u1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Description: The GNU sed stream editor
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: http://www.gnu.org/software/sed/

Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 246
Maintainer: Denis Roio <jaromil@dyne.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.26.2-6+devuan1
Depends: libc6 (>= 2.17)
Description: smart column output alignment library
 The smart column output alignment library, used by fdisk utilities.

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 66
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Multi-Arch: foreign
Version: 5.3
Depends: lsb-base (>= 3.0-6)
Recommends: ifupdown
Breaks: ifupdown (<< 0.7)
Conffiles:
 /etc/rpc f0b6f6352bf886623adc04183120f83b
 /etc/protocols bb9c019d6524e913fd72441d58b68216
 /etc/services 7d9960c77b363e2c2f41b77733cf57d4
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.

