This is doc/gnat_rm.info, produced by makeinfo version 4.9 from
/gcc-5.30/gcc/ada/gnat_rm.texi.

Generated by Sphinx 1.3b2.
INFO-DIR-SECTION GNU Ada Tools
START-INFO-DIR-ENTRY
* gnat_rm: (gnat_rm.info). gnat_rm
END-INFO-DIR-ENTRY

     GNAT Reference Manual , March 24, 2015

     AdaCore

     Copyright (C) 2008-2015, Free Software Foundation


File: gnat_rm.info,  Node: Top,  Next: About This Guide,  Up: (dir)

GNAT Reference Manual
*********************

     GNAT Reference Manual , March 24, 2015

     AdaCore

     Copyright (C) 2008-2015, Free Software Foundation

`GNAT, The GNU Ada Development Environment'

GCC version 5.3.0
AdaCore

Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
Invariant Sections, with the Front-Cover Texts being "GNAT Reference
Manual", and with no Back-Cover Texts.  A copy of the license is
included in the section entitled *Note GNU Free Documentation License:
1.

* Menu:

* About This Guide::
* Implementation Defined Pragmas::
* Implementation Defined Aspects::
* Implementation Defined Attributes::
* Standard and Implementation Defined Restrictions::
* Implementation Advice::
* Implementation Defined Characteristics::
* Intrinsic Subprograms::
* Representation Clauses and Pragmas::
* Standard Library Routines::
* The Implementation of Standard I/O::
* The GNAT Library::
* Interfacing to Other Languages::
* Specialized Needs Annexes::
* Implementation of Specific Ada Features::
* Implementation of Ada 2012 Features::
* Obsolescent Features::
* Compatibility and Porting Guide::
* GNU Free Documentation License::
* Index::

 --- The Detailed Node Listing ---

About This Guide

* What This Reference Manual Contains::
* Conventions::
* Related Information::

Implementation Defined Pragmas

* Pragma Abort_Defer::
* Pragma Abstract_State::
* Pragma Ada_83::
* Pragma Ada_95::
* Pragma Ada_05::
* Pragma Ada_2005::
* Pragma Ada_12::
* Pragma Ada_2012::
* Pragma Allow_Integer_Address::
* Pragma Annotate::
* Pragma Assert::
* Pragma Assert_And_Cut::
* Pragma Assertion_Policy::
* Pragma Assume::
* Pragma Assume_No_Invalid_Values::
* Pragma Async_Readers::
* Pragma Async_Writers::
* Pragma Attribute_Definition::
* Pragma C_Pass_By_Copy::
* Pragma Check::
* Pragma Check_Float_Overflow::
* Pragma Check_Name::
* Pragma Check_Policy::
* Pragma CIL_Constructor::
* Pragma Comment::
* Pragma Common_Object::
* Pragma Compile_Time_Error::
* Pragma Compile_Time_Warning::
* Pragma Compiler_Unit::
* Pragma Compiler_Unit_Warning::
* Pragma Complete_Representation::
* Pragma Complex_Representation::
* Pragma Component_Alignment::
* Pragma Contract_Cases::
* Pragma Convention_Identifier::
* Pragma CPP_Class::
* Pragma CPP_Constructor::
* Pragma CPP_Virtual::
* Pragma CPP_Vtable::
* Pragma CPU::
* Pragma Debug::
* Pragma Debug_Policy::
* Pragma Default_Scalar_Storage_Order::
* Pragma Default_Storage_Pool::
* Pragma Depends::
* Pragma Detect_Blocking::
* Pragma Disable_Atomic_Synchronization::
* Pragma Dispatching_Domain::
* Pragma Effective_Reads::
* Pragma Effective_Writes::
* Pragma Elaboration_Checks::
* Pragma Eliminate::
* Pragma Enable_Atomic_Synchronization::
* Pragma Export_Function::
* Pragma Export_Object::
* Pragma Export_Procedure::
* Pragma Export_Value::
* Pragma Export_Valued_Procedure::
* Pragma Extend_System::
* Pragma Extensions_Allowed::
* Pragma External::
* Pragma External_Name_Casing::
* Pragma Fast_Math::
* Pragma Favor_Top_Level::
* Pragma Finalize_Storage_Only::
* Pragma Float_Representation::
* Pragma Global::
* Pragma Ident::
* Pragma Ignore_Pragma::
* Pragma Implementation_Defined::
* Pragma Implemented::
* Pragma Implicit_Packing::
* Pragma Import_Function::
* Pragma Import_Object::
* Pragma Import_Procedure::
* Pragma Import_Valued_Procedure::
* Pragma Independent::
* Pragma Independent_Components::
* Pragma Initial_Condition::
* Pragma Initialize_Scalars::
* Pragma Initializes::
* Pragma Inline_Always::
* Pragma Inline_Generic::
* Pragma Interface::
* Pragma Interface_Name::
* Pragma Interrupt_Handler::
* Pragma Interrupt_State::
* Pragma Invariant::
* Pragma Java_Constructor::
* Pragma Java_Interface::
* Pragma Keep_Names::
* Pragma License::
* Pragma Link_With::
* Pragma Linker_Alias::
* Pragma Linker_Constructor::
* Pragma Linker_Destructor::
* Pragma Linker_Section::
* Pragma Lock_Free::
* Pragma Loop_Invariant::
* Pragma Loop_Optimize::
* Pragma Loop_Variant::
* Pragma Machine_Attribute::
* Pragma Main::
* Pragma Main_Storage::
* Pragma No_Body::
* Pragma No_Elaboration_Code_All::
* Pragma No_Inline::
* Pragma No_Return::
* Pragma No_Run_Time::
* Pragma No_Strict_Aliasing::
* Pragma No_Tagged_Streams::
* Pragma Normalize_Scalars::
* Pragma Obsolescent::
* Pragma Optimize_Alignment::
* Pragma Ordered::
* Pragma Overflow_Mode::
* Pragma Overriding_Renamings::
* Pragma Partition_Elaboration_Policy::
* Pragma Part_Of::
* Pragma Passive::
* Pragma Persistent_BSS::
* Pragma Polling::
* Pragma Post::
* Pragma Postcondition::
* Pragma Post_Class::
* Pragma Pre::
* Pragma Precondition::
* Pragma Predicate::
* Pragma Preelaborable_Initialization::
* Pragma Prefix_Exception_Messages::
* Pragma Pre_Class::
* Pragma Priority_Specific_Dispatching::
* Pragma Profile::
* Pragma Profile_Warnings::
* Pragma Propagate_Exceptions::
* Pragma Provide_Shift_Operators::
* Pragma Psect_Object::
* Pragma Pure_Function::
* Pragma Rational::
* Pragma Ravenscar::
* Pragma Refined_Depends::
* Pragma Refined_Global::
* Pragma Refined_Post::
* Pragma Refined_State::
* Pragma Relative_Deadline::
* Pragma Remote_Access_Type::
* Pragma Restricted_Run_Time::
* Pragma Restriction_Warnings::
* Pragma Reviewable::
* Pragma Share_Generic::
* Pragma Shared::
* Pragma Short_Circuit_And_Or::
* Pragma Short_Descriptors::
* Pragma Simple_Storage_Pool_Type::
* Pragma Source_File_Name::
* Pragma Source_File_Name_Project::
* Pragma Source_Reference::
* Pragma SPARK_Mode::
* Pragma Static_Elaboration_Desired::
* Pragma Stream_Convert::
* Pragma Style_Checks::
* Pragma Subtitle::
* Pragma Suppress::
* Pragma Suppress_All::
* Pragma Suppress_Debug_Info::
* Pragma Suppress_Exception_Locations::
* Pragma Suppress_Initialization::
* Pragma Task_Name::
* Pragma Task_Storage::
* Pragma Test_Case::
* Pragma Thread_Local_Storage::
* Pragma Time_Slice::
* Pragma Title::
* Pragma Type_Invariant::
* Pragma Type_Invariant_Class::
* Pragma Unchecked_Union::
* Pragma Unevaluated_Use_Of_Old::
* Pragma Unimplemented_Unit::
* Pragma Universal_Aliasing::
* Pragma Universal_Data::
* Pragma Unmodified::
* Pragma Unreferenced::
* Pragma Unreferenced_Objects::
* Pragma Unreserve_All_Interrupts::
* Pragma Unsuppress::
* Pragma Use_VADS_Size::
* Pragma Validity_Checks::
* Pragma Volatile::
* Pragma Warning_As_Error::
* Pragma Warnings::
* Pragma Weak_External::
* Pragma Wide_Character_Encoding::

Implementation Defined Aspects

* Aspect Abstract_State::
* Annotate::
* Aspect Async_Readers::
* Aspect Async_Writers::
* Aspect Contract_Cases::
* Aspect Depends::
* Aspect Dimension::
* Aspect Dimension_System::
* Aspect Effective_Reads::
* Aspect Effective_Writes::
* Aspect Favor_Top_Level::
* Aspect Global::
* Aspect Initial_Condition::
* Aspect Initializes::
* Aspect Inline_Always::
* Aspect Invariant::
* Aspect Invariant'Class::
* Aspect Iterable::
* Aspect Linker_Section::
* Aspect Lock_Free::
* Aspect No_Elaboration_Code_All::
* Aspect No_Tagged_Streams::
* Aspect Object_Size::
* Aspect Obsolescent::
* Aspect Part_Of::
* Aspect Persistent_BSS::
* Aspect Predicate::
* Aspect Pure_Function::
* Aspect Refined_Depends::
* Aspect Refined_Global::
* Aspect Refined_Post::
* Aspect Refined_State::
* Aspect Remote_Access_Type::
* Aspect Scalar_Storage_Order::
* Aspect Shared::
* Aspect Simple_Storage_Pool::
* Aspect Simple_Storage_Pool_Type::
* Aspect SPARK_Mode::
* Aspect Suppress_Debug_Info::
* Aspect Suppress_Initialization::
* Aspect Test_Case::
* Aspect Thread_Local_Storage::
* Aspect Universal_Aliasing::
* Aspect Universal_Data::
* Aspect Unmodified::
* Aspect Unreferenced::
* Aspect Unreferenced_Objects::
* Aspect Value_Size::
* Aspect Warnings::

Implementation Defined Attributes

* Attribute Abort_Signal::
* Attribute Address_Size::
* Attribute Asm_Input::
* Attribute Asm_Output::
* Attribute Atomic_Always_Lock_Free::
* Attribute Bit::
* Attribute Bit_Position::
* Attribute Code_Address::
* Attribute Compiler_Version::
* Attribute Constrained::
* Attribute Default_Bit_Order::
* Attribute Default_Scalar_Storage_Order::
* Attribute Deref::
* Attribute Descriptor_Size::
* Attribute Elaborated::
* Attribute Elab_Body::
* Attribute Elab_Spec::
* Attribute Elab_Subp_Body::
* Attribute Emax::
* Attribute Enabled::
* Attribute Enum_Rep::
* Attribute Enum_Val::
* Attribute Epsilon::
* Attribute Fast_Math::
* Attribute Fixed_Value::
* Attribute From_Any::
* Attribute Has_Access_Values::
* Attribute Has_Discriminants::
* Attribute Img::
* Attribute Integer_Value::
* Attribute Invalid_Value::
* Attribute Iterable::
* Attribute Large::
* Attribute Library_Level::
* Attribute Lock_Free::
* Attribute Loop_Entry::
* Attribute Machine_Size::
* Attribute Mantissa::
* Attribute Maximum_Alignment::
* Attribute Mechanism_Code::
* Attribute Null_Parameter::
* Attribute Object_Size::
* Attribute Old::
* Attribute Passed_By_Reference::
* Attribute Pool_Address::
* Attribute Range_Length::
* Attribute Ref::
* Attribute Restriction_Set::
* Attribute Result::
* Attribute Safe_Emax::
* Attribute Safe_Large::
* Attribute Safe_Small::
* Attribute Scalar_Storage_Order::
* Attribute Simple_Storage_Pool::
* Attribute Small::
* Attribute Storage_Unit::
* Attribute Stub_Type::
* Attribute System_Allocator_Alignment::
* Attribute Target_Name::
* Attribute To_Address::
* Attribute To_Any::
* Attribute Type_Class::
* Attribute Type_Key::
* Attribute TypeCode::
* Attribute UET_Address::
* Attribute Unconstrained_Array::
* Attribute Universal_Literal_String::
* Attribute Unrestricted_Access::
* Attribute Update::
* Attribute Valid_Scalars::
* Attribute VADS_Size::
* Attribute Value_Size::
* Attribute Wchar_T_Size::
* Attribute Word_Size::

Standard and Implementation Defined Restrictions

* Partition-Wide Restrictions::
* Program Unit Level Restrictions::

Partition-Wide Restrictions

* Immediate_Reclamation::
* Max_Asynchronous_Select_Nesting::
* Max_Entry_Queue_Length::
* Max_Protected_Entries::
* Max_Select_Alternatives::
* Max_Storage_At_Blocking::
* Max_Task_Entries::
* Max_Tasks::
* No_Abort_Statements::
* No_Access_Parameter_Allocators::
* No_Access_Subprograms::
* No_Allocators::
* No_Anonymous_Allocators::
* No_Calendar::
* No_Coextensions::
* No_Default_Initialization::
* No_Delay::
* No_Dependence::
* No_Direct_Boolean_Operators::
* No_Dispatch::
* No_Dispatching_Calls::
* No_Dynamic_Attachment::
* No_Dynamic_Priorities::
* No_Entry_Calls_In_Elaboration_Code::
* No_Enumeration_Maps::
* No_Exception_Handlers::
* No_Exception_Propagation::
* No_Exception_Registration::
* No_Exceptions::
* No_Finalization::
* No_Fixed_Point::
* No_Floating_Point::
* No_Implicit_Conditionals::
* No_Implicit_Dynamic_Code::
* No_Implicit_Heap_Allocations::
* No_Implicit_Loops::
* No_Initialize_Scalars::
* No_IO::
* No_Local_Allocators::
* No_Local_Protected_Objects::
* No_Local_Timing_Events::
* No_Long_Long_Integers::
* No_Multiple_Elaboration::
* No_Nested_Finalization::
* No_Protected_Type_Allocators::
* No_Protected_Types::
* No_Recursion::
* No_Reentrancy::
* No_Relative_Delay::
* No_Requeue_Statements::
* No_Secondary_Stack::
* No_Select_Statements::
* No_Specific_Termination_Handlers::
* No_Specification_of_Aspect::
* No_Standard_Allocators_After_Elaboration::
* No_Standard_Storage_Pools::
* No_Stream_Optimizations::
* No_Streams::
* No_Task_Allocators::
* No_Task_Attributes_Package::
* No_Task_Hierarchy::
* No_Task_Termination::
* No_Tasking::
* No_Terminate_Alternatives::
* No_Unchecked_Access::
* No_Use_Of_Entity::
* Simple_Barriers::
* Static_Priorities::
* Static_Storage_Size::

Program Unit Level Restrictions

* No_Elaboration_Code::
* No_Entry_Queue::
* No_Implementation_Aspect_Specifications::
* No_Implementation_Attributes::
* No_Implementation_Identifiers::
* No_Implementation_Pragmas::
* No_Implementation_Restrictions::
* No_Implementation_Units::
* No_Implicit_Aliasing::
* No_Obsolescent_Features::
* No_Wide_Characters::
* SPARK_05::

Implementation Advice

* RM 1.1.3(20); Error Detection: RM 1 1 3 20 Error Detection.
* RM 1.1.3(31); Child Units: RM 1 1 3 31 Child Units.
* RM 1.1.5(12); Bounded Errors: RM 1 1 5 12 Bounded Errors.
* RM 2.8(16); Pragmas: RM 2 8 16 Pragmas.
* RM 2.8(17-19); Pragmas: RM 2 8 17-19 Pragmas.
* RM 3.5.2(5); Alternative Character Sets: RM 3 5 2 5 Alternative Character Sets.
* RM 3.5.4(28); Integer Types: RM 3 5 4 28 Integer Types.
* RM 3.5.4(29); Integer Types: RM 3 5 4 29 Integer Types.
* RM 3.5.5(8); Enumeration Values: RM 3 5 5 8 Enumeration Values.
* RM 3.5.7(17); Float Types: RM 3 5 7 17 Float Types.
* RM 3.6.2(11); Multidimensional Arrays: RM 3 6 2 11 Multidimensional Arrays.
* RM 9.6(30-31); Duration'Small: RM 9 6 30-31 Duration'Small.
* RM 10.2.1(12); Consistent Representation: RM 10 2 1 12 Consistent Representation.
* RM 11.4.1(19); Exception Information: RM 11 4 1 19 Exception Information.
* RM 11.5(28); Suppression of Checks: RM 11 5 28 Suppression of Checks.
* RM 13.1 (21-24); Representation Clauses: RM 13 1 21-24 Representation Clauses.
* RM 13.2(6-8); Packed Types: RM 13 2 6-8 Packed Types.
* RM 13.3(14-19); Address Clauses: RM 13 3 14-19 Address Clauses.
* RM 13.3(29-35); Alignment Clauses: RM 13 3 29-35 Alignment Clauses.
* RM 13.3(42-43); Size Clauses: RM 13 3 42-43 Size Clauses.
* RM 13.3(50-56); Size Clauses: RM 13 3 50-56 Size Clauses.
* RM 13.3(71-73); Component Size Clauses: RM 13 3 71-73 Component Size Clauses.
* RM 13.4(9-10); Enumeration Representation Clauses: RM 13 4 9-10 Enumeration Representation Clauses.
* RM 13.5.1(17-22); Record Representation Clauses: RM 13 5 1 17-22 Record Representation Clauses.
* RM 13.5.2(5); Storage Place Attributes: RM 13 5 2 5 Storage Place Attributes.
* RM 13.5.3(7-8); Bit Ordering: RM 13 5 3 7-8 Bit Ordering.
* RM 13.7(37); Address as Private: RM 13 7 37 Address as Private.
* RM 13.7.1(16); Address Operations: RM 13 7 1 16 Address Operations.
* RM 13.9(14-17); Unchecked Conversion: RM 13 9 14-17 Unchecked Conversion.
* RM 13.11(23-25); Implicit Heap Usage: RM 13 11 23-25 Implicit Heap Usage.
* RM 13.11.2(17); Unchecked Deallocation: RM 13 11 2 17 Unchecked Deallocation.
* RM 13.13.2(17); Stream Oriented Attributes: RM 13 13 2 17 Stream Oriented Attributes.
* RM A.1(52); Names of Predefined Numeric Types: RM A 1 52 Names of Predefined Numeric Types.
* RM A.3.2(49); Ada.Characters.Handling: RM A 3 2 49 Ada Characters Handling.
* RM A.4.4(106); Bounded-Length String Handling: RM A 4 4 106 Bounded-Length String Handling.
* RM A.5.2(46-47); Random Number Generation: RM A 5 2 46-47 Random Number Generation.
* RM A.10.7(23); Get_Immediate: RM A 10 7 23 Get_Immediate.
* RM B.1(39-41); Pragma Export: RM B 1 39-41 Pragma Export.
* RM B.2(12-13); Package Interfaces: RM B 2 12-13 Package Interfaces.
* RM B.3(63-71); Interfacing with C: RM B 3 63-71 Interfacing with C.
* RM B.4(95-98); Interfacing with COBOL: RM B 4 95-98 Interfacing with COBOL.
* RM B.5(22-26); Interfacing with Fortran: RM B 5 22-26 Interfacing with Fortran.
* RM C.1(3-5); Access to Machine Operations: RM C 1 3-5 Access to Machine Operations.
* RM C.1(10-16); Access to Machine Operations: RM C 1 10-16 Access to Machine Operations.
* RM C.3(28); Interrupt Support: RM C 3 28 Interrupt Support.
* RM C.3.1(20-21); Protected Procedure Handlers: RM C 3 1 20-21 Protected Procedure Handlers.
* RM C.3.2(25); Package Interrupts: RM C 3 2 25 Package Interrupts.
* RM C.4(14); Pre-elaboration Requirements: RM C 4 14 Pre-elaboration Requirements.
* RM C.5(8); Pragma Discard_Names: RM C 5 8 Pragma Discard_Names.
* RM C.7.2(30); The Package Task_Attributes: RM C 7 2 30 The Package Task_Attributes.
* RM D.3(17); Locking Policies: RM D 3 17 Locking Policies.
* RM D.4(16); Entry Queuing Policies: RM D 4 16 Entry Queuing Policies.
* RM D.6(9-10); Preemptive Abort: RM D 6 9-10 Preemptive Abort.
* RM D.7(21); Tasking Restrictions: RM D 7 21 Tasking Restrictions.
* RM D.8(47-49); Monotonic Time: RM D 8 47-49 Monotonic Time.
* RM E.5(28-29); Partition Communication Subsystem: RM E 5 28-29 Partition Communication Subsystem.
* RM F(7); COBOL Support: RM F 7 COBOL Support.
* RM F.1(2); Decimal Radix Support: RM F 1 2 Decimal Radix Support.
* RM G; Numerics: RM G Numerics.
* RM G.1.1(56-58); Complex Types: RM G 1 1 56-58 Complex Types.
* RM G.1.2(49); Complex Elementary Functions: RM G 1 2 49 Complex Elementary Functions.
* RM G.2.4(19); Accuracy Requirements: RM G 2 4 19 Accuracy Requirements.
* RM G.2.6(15); Complex Arithmetic Accuracy: RM G 2 6 15 Complex Arithmetic Accuracy.
* RM H.6(15/2); Pragma Partition_Elaboration_Policy: RM H 6 15/2 Pragma Partition_Elaboration_Policy.

Intrinsic Subprograms

* Intrinsic Operators::
* Compilation_Date::
* Compilation_Time::
* Enclosing_Entity::
* Exception_Information::
* Exception_Message::
* Exception_Name::
* File::
* Line::
* Shifts and Rotates::
* Source_Location::

Representation Clauses and Pragmas

* Alignment Clauses::
* Size Clauses::
* Storage_Size Clauses::
* Size of Variant Record Objects::
* Biased Representation::
* Value_Size and Object_Size Clauses::
* Component_Size Clauses::
* Bit_Order Clauses::
* Effect of Bit_Order on Byte Ordering::
* Pragma Pack for Arrays::
* Pragma Pack for Records::
* Record Representation Clauses::
* Handling of Records with Holes::
* Enumeration Clauses::
* Address Clauses::
* Use of Address Clauses for Memory-Mapped I/O::
* Effect of Convention on Representation::
* Conventions and Anonymous Access Types::
* Determining the Representations chosen by GNAT::

The Implementation of Standard I/O

* Standard I/O Packages::
* FORM Strings::
* Direct_IO::
* Sequential_IO::
* Text_IO::
* Wide_Text_IO::
* Wide_Wide_Text_IO::
* Stream_IO::
* Text Translation::
* Shared Files::
* Filenames encoding::
* File content encoding::
* Open Modes::
* Operations on C Streams::
* Interfacing to C Streams::

Text_IO

* Stream Pointer Positioning::
* Reading and Writing Non-Regular Files::
* Get_Immediate::
* Treating Text_IO Files as Streams::
* Text_IO Extensions::
* Text_IO Facilities for Unbounded Strings::

Wide_Text_IO

* Stream Pointer Positioning: Stream Pointer Positioning<2>.
* Reading and Writing Non-Regular Files: Reading and Writing Non-Regular Files<2>.

Wide_Wide_Text_IO

* Stream Pointer Positioning: Stream Pointer Positioning<3>.
* Reading and Writing Non-Regular Files: Reading and Writing Non-Regular Files<3>.

The GNAT Library

* Ada.Characters.Latin_9 (a-chlat9.ads): Ada Characters Latin_9 a-chlat9 ads.
* Ada.Characters.Wide_Latin_1 (a-cwila1.ads): Ada Characters Wide_Latin_1 a-cwila1 ads.
* Ada.Characters.Wide_Latin_9 (a-cwila1.ads): Ada Characters Wide_Latin_9 a-cwila1 ads.
* Ada.Characters.Wide_Wide_Latin_1 (a-chzla1.ads): Ada Characters Wide_Wide_Latin_1 a-chzla1 ads.
* Ada.Characters.Wide_Wide_Latin_9 (a-chzla9.ads): Ada Characters Wide_Wide_Latin_9 a-chzla9 ads.
* Ada.Containers.Formal_Doubly_Linked_Lists (a-cfdlli.ads): Ada Containers Formal_Doubly_Linked_Lists a-cfdlli ads.
* Ada.Containers.Formal_Hashed_Maps (a-cfhama.ads): Ada Containers Formal_Hashed_Maps a-cfhama ads.
* Ada.Containers.Formal_Hashed_Sets (a-cfhase.ads): Ada Containers Formal_Hashed_Sets a-cfhase ads.
* Ada.Containers.Formal_Ordered_Maps (a-cforma.ads): Ada Containers Formal_Ordered_Maps a-cforma ads.
* Ada.Containers.Formal_Ordered_Sets (a-cforse.ads): Ada Containers Formal_Ordered_Sets a-cforse ads.
* Ada.Containers.Formal_Vectors (a-cofove.ads): Ada Containers Formal_Vectors a-cofove ads.
* Ada.Containers.Formal_Indefinite_Vectors (a-cfinve.ads): Ada Containers Formal_Indefinite_Vectors a-cfinve ads.
* Ada.Containers.Bounded_Holders (a-coboho.ads): Ada Containers Bounded_Holders a-coboho ads.
* Ada.Command_Line.Environment (a-colien.ads): Ada Command_Line Environment a-colien ads.
* Ada.Command_Line.Remove (a-colire.ads): Ada Command_Line Remove a-colire ads.
* Ada.Command_Line.Response_File (a-clrefi.ads): Ada Command_Line Response_File a-clrefi ads.
* Ada.Direct_IO.C_Streams (a-diocst.ads): Ada Direct_IO C_Streams a-diocst ads.
* Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads): Ada Exceptions Is_Null_Occurrence a-einuoc ads.
* Ada.Exceptions.Last_Chance_Handler (a-elchha.ads): Ada Exceptions Last_Chance_Handler a-elchha ads.
* Ada.Exceptions.Traceback (a-exctra.ads): Ada Exceptions Traceback a-exctra ads.
* Ada.Sequential_IO.C_Streams (a-siocst.ads): Ada Sequential_IO C_Streams a-siocst ads.
* Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads): Ada Streams Stream_IO C_Streams a-ssicst ads.
* Ada.Strings.Unbounded.Text_IO (a-suteio.ads): Ada Strings Unbounded Text_IO a-suteio ads.
* Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads): Ada Strings Wide_Unbounded Wide_Text_IO a-swuwti ads.
* Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads): Ada Strings Wide_Wide_Unbounded Wide_Wide_Text_IO a-szuzti ads.
* Ada.Text_IO.C_Streams (a-tiocst.ads): Ada Text_IO C_Streams a-tiocst ads.
* Ada.Text_IO.Reset_Standard_Files (a-tirsfi.ads): Ada Text_IO Reset_Standard_Files a-tirsfi ads.
* Ada.Wide_Characters.Unicode (a-wichun.ads): Ada Wide_Characters Unicode a-wichun ads.
* Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads): Ada Wide_Text_IO C_Streams a-wtcstr ads.
* Ada.Wide_Text_IO.Reset_Standard_Files (a-wrstfi.ads): Ada Wide_Text_IO Reset_Standard_Files a-wrstfi ads.
* Ada.Wide_Wide_Characters.Unicode (a-zchuni.ads): Ada Wide_Wide_Characters Unicode a-zchuni ads.
* Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads): Ada Wide_Wide_Text_IO C_Streams a-ztcstr ads.
* Ada.Wide_Wide_Text_IO.Reset_Standard_Files (a-zrstfi.ads): Ada Wide_Wide_Text_IO Reset_Standard_Files a-zrstfi ads.
* GNAT.Altivec (g-altive.ads): GNAT Altivec g-altive ads.
* GNAT.Altivec.Conversions (g-altcon.ads): GNAT Altivec Conversions g-altcon ads.
* GNAT.Altivec.Vector_Operations (g-alveop.ads): GNAT Altivec Vector_Operations g-alveop ads.
* GNAT.Altivec.Vector_Types (g-alvety.ads): GNAT Altivec Vector_Types g-alvety ads.
* GNAT.Altivec.Vector_Views (g-alvevi.ads): GNAT Altivec Vector_Views g-alvevi ads.
* GNAT.Array_Split (g-arrspl.ads): GNAT Array_Split g-arrspl ads.
* GNAT.AWK (g-awk.ads): GNAT AWK g-awk ads.
* GNAT.Bounded_Buffers (g-boubuf.ads): GNAT Bounded_Buffers g-boubuf ads.
* GNAT.Bounded_Mailboxes (g-boumai.ads): GNAT Bounded_Mailboxes g-boumai ads.
* GNAT.Bubble_Sort (g-bubsor.ads): GNAT Bubble_Sort g-bubsor ads.
* GNAT.Bubble_Sort_A (g-busora.ads): GNAT Bubble_Sort_A g-busora ads.
* GNAT.Bubble_Sort_G (g-busorg.ads): GNAT Bubble_Sort_G g-busorg ads.
* GNAT.Byte_Order_Mark (g-byorma.ads): GNAT Byte_Order_Mark g-byorma ads.
* GNAT.Byte_Swapping (g-bytswa.ads): GNAT Byte_Swapping g-bytswa ads.
* GNAT.Calendar (g-calend.ads): GNAT Calendar g-calend ads.
* GNAT.Calendar.Time_IO (g-catiio.ads): GNAT Calendar Time_IO g-catiio ads.
* GNAT.CRC32 (g-crc32.ads): GNAT CRC32 g-crc32 ads.
* GNAT.Case_Util (g-casuti.ads): GNAT Case_Util g-casuti ads.
* GNAT.CGI (g-cgi.ads): GNAT CGI g-cgi ads.
* GNAT.CGI.Cookie (g-cgicoo.ads): GNAT CGI Cookie g-cgicoo ads.
* GNAT.CGI.Debug (g-cgideb.ads): GNAT CGI Debug g-cgideb ads.
* GNAT.Command_Line (g-comlin.ads): GNAT Command_Line g-comlin ads.
* GNAT.Compiler_Version (g-comver.ads): GNAT Compiler_Version g-comver ads.
* GNAT.Ctrl_C (g-ctrl_c.ads): GNAT Ctrl_C g-ctrl_c ads.
* GNAT.Current_Exception (g-curexc.ads): GNAT Current_Exception g-curexc ads.
* GNAT.Debug_Pools (g-debpoo.ads): GNAT Debug_Pools g-debpoo ads.
* GNAT.Debug_Utilities (g-debuti.ads): GNAT Debug_Utilities g-debuti ads.
* GNAT.Decode_String (g-decstr.ads): GNAT Decode_String g-decstr ads.
* GNAT.Decode_UTF8_String (g-deutst.ads): GNAT Decode_UTF8_String g-deutst ads.
* GNAT.Directory_Operations (g-dirope.ads): GNAT Directory_Operations g-dirope ads.
* GNAT.Directory_Operations.Iteration (g-diopit.ads): GNAT Directory_Operations Iteration g-diopit ads.
* GNAT.Dynamic_HTables (g-dynhta.ads): GNAT Dynamic_HTables g-dynhta ads.
* GNAT.Dynamic_Tables (g-dyntab.ads): GNAT Dynamic_Tables g-dyntab ads.
* GNAT.Encode_String (g-encstr.ads): GNAT Encode_String g-encstr ads.
* GNAT.Encode_UTF8_String (g-enutst.ads): GNAT Encode_UTF8_String g-enutst ads.
* GNAT.Exception_Actions (g-excact.ads): GNAT Exception_Actions g-excact ads.
* GNAT.Exception_Traces (g-exctra.ads): GNAT Exception_Traces g-exctra ads.
* GNAT.Exceptions (g-expect.ads): GNAT Exceptions g-expect ads.
* GNAT.Expect (g-expect.ads): GNAT Expect g-expect ads.
* GNAT.Expect.TTY (g-exptty.ads): GNAT Expect TTY g-exptty ads.
* GNAT.Float_Control (g-flocon.ads): GNAT Float_Control g-flocon ads.
* GNAT.Formatted_String (g-forstr.ads): GNAT Formatted_String g-forstr ads.
* GNAT.Heap_Sort (g-heasor.ads): GNAT Heap_Sort g-heasor ads.
* GNAT.Heap_Sort_A (g-hesora.ads): GNAT Heap_Sort_A g-hesora ads.
* GNAT.Heap_Sort_G (g-hesorg.ads): GNAT Heap_Sort_G g-hesorg ads.
* GNAT.HTable (g-htable.ads): GNAT HTable g-htable ads.
* GNAT.IO (g-io.ads): GNAT IO g-io ads.
* GNAT.IO_Aux (g-io_aux.ads): GNAT IO_Aux g-io_aux ads.
* GNAT.Lock_Files (g-locfil.ads): GNAT Lock_Files g-locfil ads.
* GNAT.MBBS_Discrete_Random (g-mbdira.ads): GNAT MBBS_Discrete_Random g-mbdira ads.
* GNAT.MBBS_Float_Random (g-mbflra.ads): GNAT MBBS_Float_Random g-mbflra ads.
* GNAT.MD5 (g-md5.ads): GNAT MD5 g-md5 ads.
* GNAT.Memory_Dump (g-memdum.ads): GNAT Memory_Dump g-memdum ads.
* GNAT.Most_Recent_Exception (g-moreex.ads): GNAT Most_Recent_Exception g-moreex ads.
* GNAT.OS_Lib (g-os_lib.ads): GNAT OS_Lib g-os_lib ads.
* GNAT.Perfect_Hash_Generators (g-pehage.ads): GNAT Perfect_Hash_Generators g-pehage ads.
* GNAT.Random_Numbers (g-rannum.ads): GNAT Random_Numbers g-rannum ads.
* GNAT.Regexp (g-regexp.ads): GNAT Regexp g-regexp ads.
* GNAT.Registry (g-regist.ads): GNAT Registry g-regist ads.
* GNAT.Regpat (g-regpat.ads): GNAT Regpat g-regpat ads.
* GNAT.Rewrite_Data (g-rewdat.ads): GNAT Rewrite_Data g-rewdat ads.
* GNAT.Secondary_Stack_Info (g-sestin.ads): GNAT Secondary_Stack_Info g-sestin ads.
* GNAT.Semaphores (g-semaph.ads): GNAT Semaphores g-semaph ads.
* GNAT.Serial_Communications (g-sercom.ads): GNAT Serial_Communications g-sercom ads.
* GNAT.SHA1 (g-sha1.ads): GNAT SHA1 g-sha1 ads.
* GNAT.SHA224 (g-sha224.ads): GNAT SHA224 g-sha224 ads.
* GNAT.SHA256 (g-sha256.ads): GNAT SHA256 g-sha256 ads.
* GNAT.SHA384 (g-sha384.ads): GNAT SHA384 g-sha384 ads.
* GNAT.SHA512 (g-sha512.ads): GNAT SHA512 g-sha512 ads.
* GNAT.Signals (g-signal.ads): GNAT Signals g-signal ads.
* GNAT.Sockets (g-socket.ads): GNAT Sockets g-socket ads.
* GNAT.Source_Info (g-souinf.ads): GNAT Source_Info g-souinf ads.
* GNAT.Spelling_Checker (g-speche.ads): GNAT Spelling_Checker g-speche ads.
* GNAT.Spelling_Checker_Generic (g-spchge.ads): GNAT Spelling_Checker_Generic g-spchge ads.
* GNAT.Spitbol.Patterns (g-spipat.ads): GNAT Spitbol Patterns g-spipat ads.
* GNAT.Spitbol (g-spitbo.ads): GNAT Spitbol g-spitbo ads.
* GNAT.Spitbol.Table_Boolean (g-sptabo.ads): GNAT Spitbol Table_Boolean g-sptabo ads.
* GNAT.Spitbol.Table_Integer (g-sptain.ads): GNAT Spitbol Table_Integer g-sptain ads.
* GNAT.Spitbol.Table_VString (g-sptavs.ads): GNAT Spitbol Table_VString g-sptavs ads.
* GNAT.SSE (g-sse.ads): GNAT SSE g-sse ads.
* GNAT.SSE.Vector_Types (g-ssvety.ads): GNAT SSE Vector_Types g-ssvety ads.
* GNAT.Strings (g-string.ads): GNAT Strings g-string ads.
* GNAT.String_Split (g-strspl.ads): GNAT String_Split g-strspl ads.
* GNAT.Table (g-table.ads): GNAT Table g-table ads.
* GNAT.Task_Lock (g-tasloc.ads): GNAT Task_Lock g-tasloc ads.
* GNAT.Time_Stamp (g-timsta.ads): GNAT Time_Stamp g-timsta ads.
* GNAT.Threads (g-thread.ads): GNAT Threads g-thread ads.
* GNAT.Traceback (g-traceb.ads): GNAT Traceback g-traceb ads.
* GNAT.Traceback.Symbolic (g-trasym.ads): GNAT Traceback Symbolic g-trasym ads.
* GNAT.UTF_32 (g-table.ads): GNAT UTF_32 g-table ads.
* GNAT.Wide_Spelling_Checker (g-u3spch.ads): GNAT Wide_Spelling_Checker g-u3spch ads.
* GNAT.Wide_Spelling_Checker (g-wispch.ads): GNAT Wide_Spelling_Checker g-wispch ads.
* GNAT.Wide_String_Split (g-wistsp.ads): GNAT Wide_String_Split g-wistsp ads.
* GNAT.Wide_Wide_Spelling_Checker (g-zspche.ads): GNAT Wide_Wide_Spelling_Checker g-zspche ads.
* GNAT.Wide_Wide_String_Split (g-zistsp.ads): GNAT Wide_Wide_String_Split g-zistsp ads.
* Interfaces.C.Extensions (i-cexten.ads): Interfaces C Extensions i-cexten ads.
* Interfaces.C.Streams (i-cstrea.ads): Interfaces C Streams i-cstrea ads.
* Interfaces.Packed_Decimal (i-pacdec.ads): Interfaces Packed_Decimal i-pacdec ads.
* Interfaces.VxWorks (i-vxwork.ads): Interfaces VxWorks i-vxwork ads.
* Interfaces.VxWorks.IO (i-vxwoio.ads): Interfaces VxWorks IO i-vxwoio ads.
* System.Address_Image (s-addima.ads): System Address_Image s-addima ads.
* System.Assertions (s-assert.ads): System Assertions s-assert ads.
* System.Atomic_Counters (s-atocou.ads): System Atomic_Counters s-atocou ads.
* System.Memory (s-memory.ads): System Memory s-memory ads.
* System.Multiprocessors (s-multip.ads): System Multiprocessors s-multip ads.
* System.Multiprocessors.Dispatching_Domains (s-mudido.ads): System Multiprocessors Dispatching_Domains s-mudido ads.
* System.Partition_Interface (s-parint.ads): System Partition_Interface s-parint ads.
* System.Pool_Global (s-pooglo.ads): System Pool_Global s-pooglo ads.
* System.Pool_Local (s-pooloc.ads): System Pool_Local s-pooloc ads.
* System.Restrictions (s-restri.ads): System Restrictions s-restri ads.
* System.Rident (s-rident.ads): System Rident s-rident ads.
* System.Strings.Stream_Ops (s-ststop.ads): System Strings Stream_Ops s-ststop ads.
* System.Unsigned_Types (s-unstyp.ads): System Unsigned_Types s-unstyp ads.
* System.Wch_Cnv (s-wchcnv.ads): System Wch_Cnv s-wchcnv ads.
* System.Wch_Con (s-wchcon.ads): System Wch_Con s-wchcon ads.

Interfacing to Other Languages

* Interfacing to C::
* Interfacing to C++::
* Interfacing to COBOL::
* Interfacing to Fortran::
* Interfacing to non-GNAT Ada code::

Implementation of Specific Ada Features

* Machine Code Insertions::
* GNAT Implementation of Tasking::
* GNAT Implementation of Shared Passive Packages::
* Code Generation for Array Aggregates::
* The Size of Discriminated Records with Default Discriminants::
* Strict Conformance to the Ada Reference Manual::

GNAT Implementation of Tasking

* Mapping Ada Tasks onto the Underlying Kernel Threads::
* Ensuring Compliance with the Real-Time Annex::

Code Generation for Array Aggregates

* Static constant aggregates with static bounds::
* Constant aggregates with unconstrained nominal types::
* Aggregates with static bounds::
* Aggregates with non-static bounds::
* Aggregates in assignment statements::

Obsolescent Features

* pragma No_Run_Time::
* pragma Ravenscar::
* pragma Restricted_Run_Time::
* pragma Task_Info::
* package System.Task_Info (s-tasinf.ads): package System Task_Info s-tasinf ads.

Compatibility and Porting Guide

* Writing Portable Fixed-Point Declarations::
* Compatibility with Ada 83::
* Compatibility between Ada 95 and Ada 2005::
* Implementation-dependent characteristics::
* Compatibility with Other Ada Systems::
* Representation Clauses::
* Compatibility with HP Ada 83::

Compatibility with Ada 83

* Legal Ada 83 programs that are illegal in Ada 95::
* More deterministic semantics::
* Changed semantics::
* Other language compatibility issues::

Implementation-dependent characteristics

* Implementation-defined pragmas::
* Implementation-defined attributes::
* Libraries::
* Elaboration order::
* Target-specific aspects::


File: gnat_rm.info,  Node: About This Guide,  Next: Implementation Defined Pragmas,  Prev: Top,  Up: Top

1 About This Guide
******************

This manual contains useful information in writing programs using the
GNAT compiler.  It includes information on implementation dependent
characteristics of GNAT, including all the information required by
Annex M of the Ada language standard.

GNAT implements Ada 95, Ada 2005 and Ada 2012, and it may also be
invoked in Ada 83 compatibility mode.  By default, GNAT assumes Ada
2012, but you can override with a compiler switch to explicitly specify
the language version.  (Please refer to the `GNAT User's Guide' for
details on these switches.)  Throughout this manual, references to
'Ada' without a year suffix apply to all the Ada versions of the
language.

Ada is designed to be highly portable.  In general, a program will have
the same effect even when compiled by different compilers on different
platforms.  However, since Ada is designed to be used in a wide variety
of applications, it also contains a number of system dependent features
to be used in interfacing to the external world.  .. index::
Implementation-dependent features

Note: Any program that makes use of implementation-dependent features
may be non-portable.  You should follow good programming practice and
isolate and clearly document any sections of your program that make use
of these features in a non-portable manner.

* Menu:

* What This Reference Manual Contains::
* Conventions::
* Related Information::


File: gnat_rm.info,  Node: What This Reference Manual Contains,  Next: Conventions,  Up: About This Guide

1.1 What This Reference Manual Contains
=======================================

This reference manual contains the following chapters:

   * *Note Implementation Defined Pragmas: 7, lists GNAT
     implementation-dependent pragmas, which can be used to extend and
     enhance the functionality of the compiler.

   * *Note Implementation Defined Attributes: 8, lists GNAT
     implementation-dependent attributes, which can be used to extend
     and enhance the functionality of the compiler.

   * *Note Standard and Implementation Defined Restrictions: 9, lists
     GNAT implementation-dependent restrictions, which can be used to
     extend and enhance the functionality of the compiler.

   * *Note Implementation Advice: a, provides information on generally
     desirable behavior which are not requirements that all compilers
     must follow since it cannot be provided on all systems, or which
     may be undesirable on some systems.

   * *Note Implementation Defined Characteristics: b, provides a guide
     to minimizing implementation dependent features.

   * *Note Intrinsic Subprograms: c, describes the intrinsic subprograms
     implemented by GNAT, and how they can be imported into user
     application programs.

   * *Note Representation Clauses and Pragmas: d, describes in detail
     the way that GNAT represents data, and in particular the exact set
     of representation clauses and pragmas that is accepted.

   * *Note Standard Library Routines: e, provides a listing of packages
     and a brief description of the functionality that is provided by
     Ada's extensive set of standard library routines as implemented by
     GNAT.

   * *Note The Implementation of Standard I/O: f, details how the GNAT
     implementation of the input-output facilities.

   * *Note The GNAT Library: 10, is a catalog of packages that
     complement the Ada predefined library.

   * *Note Interfacing to Other Languages: 11, describes how programs
     written in Ada using GNAT can be interfaced to other programming
     languages.

   * *Note Specialized Needs Annexes: 12, describes the GNAT
     implementation of all of the specialized needs annexes.

   * *Note Implementation of Specific Ada Features: 13, discusses
     issues related to GNAT's implementation of machine code
     insertions, tasking, and several other features.

   * *Note Implementation of Ada 2012 Features: 14, describes the
     status of the GNAT implementation of the Ada 2012 language
     standard.

   * *Note Obsolescent Features: 15. documents implementation dependent
     features, including pragmas and attributes, which are considered
     obsolescent, since there are other preferred ways of achieving the
     same results. These obsolescent forms are retained for backwards
     compatibility.

   * *Note Compatibility and Porting Guide: 16. presents some
     guidelines for developing portable Ada code, describes the
     compatibility issues that may arise between GNAT and other Ada
     compilation systems (including those for Ada 83), and shows how
     GNAT can expedite porting applications developed in other Ada
     environments.

   * *Note GNU Free Documentation License: 1. contains the license for
     this document.

This reference manual assumes a basic familiarity with the Ada 95
language, as described in the `International Standard
ANSI/ISO/IEC-8652:1995'.  It does not require knowledge of the new
features introduced by Ada 2005 or Ada 2012.  All three reference
manuals are included in the GNAT documentation package.


File: gnat_rm.info,  Node: Conventions,  Next: Related Information,  Prev: What This Reference Manual Contains,  Up: About This Guide

1.2 Conventions
===============

Following are examples of the typographical and graphic conventions used
in this guide:

   * `Functions', `utility program names', `standard names', and
     `classes'.

   * `Option flags'

   * `File names'

   * `Variables'

   * `Emphasis'

   * [optional information or parameters]

   * Examples are described by text

         and then shown this way.

   * Commands that are entered by the user are shown as preceded by a
     prompt string comprising the `$' character followed by a space.


File: gnat_rm.info,  Node: Related Information,  Prev: Conventions,  Up: About This Guide

1.3 Related Information
=======================

See the following documents for further information on GNAT:

   * `GNAT User's Guide for Native Platforms', which provides
     information on how to use the GNAT development environment.

   * `Ada 95 Reference Manual', the Ada 95 programming language
     standard.

   * `Ada 95 Annotated Reference Manual', which is an annotated version
     of the Ada 95 standard.  The annotations describe detailed aspects
     of the design decision, and in particular contain useful sections
     on Ada 83 compatibility.

   * `Ada 2005 Reference Manual', the Ada 2005 programming language
     standard.

   * `Ada 2005 Annotated Reference Manual', which is an annotated
     version of the Ada 2005 standard.  The annotations describe
     detailed aspects of the design decision.

   * `Ada 2012 Reference Manual', the Ada 2012 programming language
     standard.

   * `DEC Ada, Technical Overview and Comparison on DIGITAL Platforms',
     which contains specific information on compatibility between GNAT
     and DEC Ada 83 systems.

   * `DEC Ada, Language Reference Manual', part number AA-PYZAB-TK,
     which describes in detail the pragmas and attributes provided by
     the DEC Ada 83 compiler system.


File: gnat_rm.info,  Node: Implementation Defined Pragmas,  Next: Implementation Defined Aspects,  Prev: About This Guide,  Up: Top

2 Implementation Defined Pragmas
********************************

Ada defines a set of pragmas that can be used to supply additional
information to the compiler.  These language defined pragmas are
implemented in GNAT and work as described in the Ada Reference Manual.

In addition, Ada allows implementations to define additional pragmas
whose meaning is defined by the implementation.  GNAT provides a number
of these implementation-defined pragmas, which can be used to extend
and enhance the functionality of the compiler.  This section of the GNAT
Reference Manual describes these additional pragmas.

Note that any program using these pragmas might not be portable to other
compilers (although GNAT implements this set of pragmas on all
platforms).  Therefore if portability to other compilers is an important
consideration, the use of these pragmas should be minimized.

* Menu:

* Pragma Abort_Defer::
* Pragma Abstract_State::
* Pragma Ada_83::
* Pragma Ada_95::
* Pragma Ada_05::
* Pragma Ada_2005::
* Pragma Ada_12::
* Pragma Ada_2012::
* Pragma Allow_Integer_Address::
* Pragma Annotate::
* Pragma Assert::
* Pragma Assert_And_Cut::
* Pragma Assertion_Policy::
* Pragma Assume::
* Pragma Assume_No_Invalid_Values::
* Pragma Async_Readers::
* Pragma Async_Writers::
* Pragma Attribute_Definition::
* Pragma C_Pass_By_Copy::
* Pragma Check::
* Pragma Check_Float_Overflow::
* Pragma Check_Name::
* Pragma Check_Policy::
* Pragma CIL_Constructor::
* Pragma Comment::
* Pragma Common_Object::
* Pragma Compile_Time_Error::
* Pragma Compile_Time_Warning::
* Pragma Compiler_Unit::
* Pragma Compiler_Unit_Warning::
* Pragma Complete_Representation::
* Pragma Complex_Representation::
* Pragma Component_Alignment::
* Pragma Contract_Cases::
* Pragma Convention_Identifier::
* Pragma CPP_Class::
* Pragma CPP_Constructor::
* Pragma CPP_Virtual::
* Pragma CPP_Vtable::
* Pragma CPU::
* Pragma Debug::
* Pragma Debug_Policy::
* Pragma Default_Scalar_Storage_Order::
* Pragma Default_Storage_Pool::
* Pragma Depends::
* Pragma Detect_Blocking::
* Pragma Disable_Atomic_Synchronization::
* Pragma Dispatching_Domain::
* Pragma Effective_Reads::
* Pragma Effective_Writes::
* Pragma Elaboration_Checks::
* Pragma Eliminate::
* Pragma Enable_Atomic_Synchronization::
* Pragma Export_Function::
* Pragma Export_Object::
* Pragma Export_Procedure::
* Pragma Export_Value::
* Pragma Export_Valued_Procedure::
* Pragma Extend_System::
* Pragma Extensions_Allowed::
* Pragma External::
* Pragma External_Name_Casing::
* Pragma Fast_Math::
* Pragma Favor_Top_Level::
* Pragma Finalize_Storage_Only::
* Pragma Float_Representation::
* Pragma Global::
* Pragma Ident::
* Pragma Ignore_Pragma::
* Pragma Implementation_Defined::
* Pragma Implemented::
* Pragma Implicit_Packing::
* Pragma Import_Function::
* Pragma Import_Object::
* Pragma Import_Procedure::
* Pragma Import_Valued_Procedure::
* Pragma Independent::
* Pragma Independent_Components::
* Pragma Initial_Condition::
* Pragma Initialize_Scalars::
* Pragma Initializes::
* Pragma Inline_Always::
* Pragma Inline_Generic::
* Pragma Interface::
* Pragma Interface_Name::
* Pragma Interrupt_Handler::
* Pragma Interrupt_State::
* Pragma Invariant::
* Pragma Java_Constructor::
* Pragma Java_Interface::
* Pragma Keep_Names::
* Pragma License::
* Pragma Link_With::
* Pragma Linker_Alias::
* Pragma Linker_Constructor::
* Pragma Linker_Destructor::
* Pragma Linker_Section::
* Pragma Lock_Free::
* Pragma Loop_Invariant::
* Pragma Loop_Optimize::
* Pragma Loop_Variant::
* Pragma Machine_Attribute::
* Pragma Main::
* Pragma Main_Storage::
* Pragma No_Body::
* Pragma No_Elaboration_Code_All::
* Pragma No_Inline::
* Pragma No_Return::
* Pragma No_Run_Time::
* Pragma No_Strict_Aliasing::
* Pragma No_Tagged_Streams::
* Pragma Normalize_Scalars::
* Pragma Obsolescent::
* Pragma Optimize_Alignment::
* Pragma Ordered::
* Pragma Overflow_Mode::
* Pragma Overriding_Renamings::
* Pragma Partition_Elaboration_Policy::
* Pragma Part_Of::
* Pragma Passive::
* Pragma Persistent_BSS::
* Pragma Polling::
* Pragma Post::
* Pragma Postcondition::
* Pragma Post_Class::
* Pragma Pre::
* Pragma Precondition::
* Pragma Predicate::
* Pragma Preelaborable_Initialization::
* Pragma Prefix_Exception_Messages::
* Pragma Pre_Class::
* Pragma Priority_Specific_Dispatching::
* Pragma Profile::
* Pragma Profile_Warnings::
* Pragma Propagate_Exceptions::
* Pragma Provide_Shift_Operators::
* Pragma Psect_Object::
* Pragma Pure_Function::
* Pragma Rational::
* Pragma Ravenscar::
* Pragma Refined_Depends::
* Pragma Refined_Global::
* Pragma Refined_Post::
* Pragma Refined_State::
* Pragma Relative_Deadline::
* Pragma Remote_Access_Type::
* Pragma Restricted_Run_Time::
* Pragma Restriction_Warnings::
* Pragma Reviewable::
* Pragma Share_Generic::
* Pragma Shared::
* Pragma Short_Circuit_And_Or::
* Pragma Short_Descriptors::
* Pragma Simple_Storage_Pool_Type::
* Pragma Source_File_Name::
* Pragma Source_File_Name_Project::
* Pragma Source_Reference::
* Pragma SPARK_Mode::
* Pragma Static_Elaboration_Desired::
* Pragma Stream_Convert::
* Pragma Style_Checks::
* Pragma Subtitle::
* Pragma Suppress::
* Pragma Suppress_All::
* Pragma Suppress_Debug_Info::
* Pragma Suppress_Exception_Locations::
* Pragma Suppress_Initialization::
* Pragma Task_Name::
* Pragma Task_Storage::
* Pragma Test_Case::
* Pragma Thread_Local_Storage::
* Pragma Time_Slice::
* Pragma Title::
* Pragma Type_Invariant::
* Pragma Type_Invariant_Class::
* Pragma Unchecked_Union::
* Pragma Unevaluated_Use_Of_Old::
* Pragma Unimplemented_Unit::
* Pragma Universal_Aliasing::
* Pragma Universal_Data::
* Pragma Unmodified::
* Pragma Unreferenced::
* Pragma Unreferenced_Objects::
* Pragma Unreserve_All_Interrupts::
* Pragma Unsuppress::
* Pragma Use_VADS_Size::
* Pragma Validity_Checks::
* Pragma Volatile::
* Pragma Warning_As_Error::
* Pragma Warnings::
* Pragma Weak_External::
* Pragma Wide_Character_Encoding::


File: gnat_rm.info,  Node: Pragma Abort_Defer,  Next: Pragma Abstract_State,  Up: Implementation Defined Pragmas

2.1 Pragma Abort_Defer
======================

Syntax:

    pragma Abort_Defer;

This pragma must appear at the start of the statement sequence of a
handled sequence of statements (right after the `begin').  It has the
effect of deferring aborts for the sequence of statements (but not for
the declarations or handlers, if any, associated with this statement
sequence).


File: gnat_rm.info,  Node: Pragma Abstract_State,  Next: Pragma Ada_83,  Prev: Pragma Abort_Defer,  Up: Implementation Defined Pragmas

2.2 Pragma Abstract_State
=========================

For the description of this pragma, see SPARK 2014 Reference Manual,
section 7.1.4.


File: gnat_rm.info,  Node: Pragma Ada_83,  Next: Pragma Ada_95,  Prev: Pragma Abstract_State,  Up: Implementation Defined Pragmas

2.3 Pragma Ada_83
=================

Syntax:

    pragma Ada_83;

A configuration pragma that establishes Ada 83 mode for the unit to
which it applies, regardless of the mode set by the command line
switches.  In Ada 83 mode, GNAT attempts to be as compatible with the
syntax and semantics of Ada 83, as defined in the original Ada 83
Reference Manual as possible.  In particular, the keywords added by Ada
95 and Ada 2005 are not recognized, optional package bodies are allowed,
and generics may name types with unknown discriminants without using
the `(<>)' notation.  In addition, some but not all of the additional
restrictions of Ada 83 are enforced.

Ada 83 mode is intended for two purposes.  Firstly, it allows existing
Ada 83 code to be compiled and adapted to GNAT with less effort.
Secondly, it aids in keeping code backwards compatible with Ada 83.
However, there is no guarantee that code that is processed correctly by
GNAT in Ada 83 mode will in fact compile and execute with an Ada 83
compiler, since GNAT does not enforce all the additional checks
required by Ada 83.


File: gnat_rm.info,  Node: Pragma Ada_95,  Next: Pragma Ada_05,  Prev: Pragma Ada_83,  Up: Implementation Defined Pragmas

2.4 Pragma Ada_95
=================

Syntax:

    pragma Ada_95;

A configuration pragma that establishes Ada 95 mode for the unit to
which it applies, regardless of the mode set by the command line
switches.  This mode is set automatically for the `Ada' and `System'
packages and their children, so you need not specify it in these
contexts.  This pragma is useful when writing a reusable component that
itself uses Ada 95 features, but which is intended to be usable from
either Ada 83 or Ada 95 programs.


File: gnat_rm.info,  Node: Pragma Ada_05,  Next: Pragma Ada_2005,  Prev: Pragma Ada_95,  Up: Implementation Defined Pragmas

2.5 Pragma Ada_05
=================

Syntax:

    pragma Ada_05;
    pragma Ada_05 (local_NAME);

A configuration pragma that establishes Ada 2005 mode for the unit to
which it applies, regardless of the mode set by the command line
switches.  This pragma is useful when writing a reusable component that
itself uses Ada 2005 features, but which is intended to be usable from
either Ada 83 or Ada 95 programs.

The one argument form (which is not a configuration pragma) is used for
managing the transition from Ada 95 to Ada 2005 in the run-time
library. If an entity is marked as Ada_2005 only, then referencing the
entity in Ada_83 or Ada_95 mode will generate a warning. In addition,
in Ada_83 or Ada_95 mode, a preference rule is established which does
not choose such an entity unless it is unambiguously specified. This
avoids extra subprograms marked this way from generating ambiguities in
otherwise legal pre-Ada_2005 programs. The one argument form is
intended for exclusive use in the GNAT run-time library.


File: gnat_rm.info,  Node: Pragma Ada_2005,  Next: Pragma Ada_12,  Prev: Pragma Ada_05,  Up: Implementation Defined Pragmas

2.6 Pragma Ada_2005
===================

Syntax:

    pragma Ada_2005;

This configuration pragma is a synonym for pragma Ada_05 and has the
same syntax and effect.


File: gnat_rm.info,  Node: Pragma Ada_12,  Next: Pragma Ada_2012,  Prev: Pragma Ada_2005,  Up: Implementation Defined Pragmas

2.7 Pragma Ada_12
=================

Syntax:

    pragma Ada_12;
    pragma Ada_12 (local_NAME);

A configuration pragma that establishes Ada 2012 mode for the unit to
which it applies, regardless of the mode set by the command line
switches.  This mode is set automatically for the `Ada' and `System'
packages and their children, so you need not specify it in these
contexts.  This pragma is useful when writing a reusable component that
itself uses Ada 2012 features, but which is intended to be usable from
Ada 83, Ada 95, or Ada 2005 programs.

The one argument form, which is not a configuration pragma, is used for
managing the transition from Ada 2005 to Ada 2012 in the run-time
library. If an entity is marked as Ada_201 only, then referencing the
entity in any pre-Ada_2012 mode will generate a warning. In addition,
in any pre-Ada_2012 mode, a preference rule is established which does
not choose such an entity unless it is unambiguously specified. This
avoids extra subprograms marked this way from generating ambiguities in
otherwise legal pre-Ada_2012 programs. The one argument form is
intended for exclusive use in the GNAT run-time library.


File: gnat_rm.info,  Node: Pragma Ada_2012,  Next: Pragma Allow_Integer_Address,  Prev: Pragma Ada_12,  Up: Implementation Defined Pragmas

2.8 Pragma Ada_2012
===================

Syntax:

    pragma Ada_2012;

This configuration pragma is a synonym for pragma Ada_12 and has the
same syntax and effect.


File: gnat_rm.info,  Node: Pragma Allow_Integer_Address,  Next: Pragma Annotate,  Prev: Pragma Ada_2012,  Up: Implementation Defined Pragmas

2.9 Pragma Allow_Integer_Address
================================

Syntax:

    pragma Allow_Integer_Address;

In almost all versions of GNAT, `System.Address' is a private type in
accordance with the implementation advice in the RM. This means that
integer values, in particular integer literals, are not allowed as
address values.  If the configuration pragma `Allow_Integer_Address' is
given, then integer expressions may be used anywhere a value of type
`System.Address' is required.  The effect is to introduce an implicit
unchecked conversion from the integer value to type `System.Address'.
The reverse case of using an address where an integer type is required
is handled analogously.  The following example compiles without errors:

    pragma Allow_Integer_Address;
    with System; use System;
    package AddrAsInt is
       X : Integer;
       Y : Integer;
       for X'Address use 16#1240#;
       for Y use at 16#3230#;
       m : Address := 16#4000#;
       n : constant Address := 4000;
       p : constant Address := Address (X + Y);
       v : Integer := y'Address;
       w : constant Integer := Integer (Y'Address);
       type R is new integer;
       RR : R := 1000;
       Z : Integer;
       for Z'Address use RR;
    end AddrAsInt;

Note that pragma `Allow_Integer_Address' is ignored if `System.Address'
is not a private type. In implementations of `GNAT' where
System.Address is a visible integer type, this pragma serves no purpose
but is ignored rather than rejected to allow common sets of sources to
be used in the two situations.


File: gnat_rm.info,  Node: Pragma Annotate,  Next: Pragma Assert,  Prev: Pragma Allow_Integer_Address,  Up: Implementation Defined Pragmas

2.10 Pragma Annotate
====================

Syntax:

    pragma Annotate (IDENTIFIER [, IDENTIFIER {, ARG}] [, entity => local_NAME]);

    ARG ::= NAME | EXPRESSION

This pragma is used to annotate programs.  `identifier' identifies the
type of annotation.  GNAT verifies that it is an identifier, but does
not otherwise analyze it. The second optional identifier is also left
unanalyzed, and by convention is used to control the action of the tool
to which the annotation is addressed.  The remaining `arg' arguments
can be either string literals or more generally expressions.  String
literals are assumed to be either of type `Standard.String' or else
`Wide_String' or `Wide_Wide_String' depending on the character literals
they contain.  All other kinds of arguments are analyzed as
expressions, and must be unambiguous. The last argument if present must
have the identifier `Entity' and GNAT verifies that a local name is
given.

The analyzed pragma is retained in the tree, but not otherwise processed
by any part of the GNAT compiler, except to generate corresponding note
lines in the generated ALI file. For the format of these note lines, see
the compiler source file lib-writ.ads. This pragma is intended for use
by external tools, including ASIS. The use of pragma Annotate does not
affect the compilation process in any way. This pragma may be used as a
configuration pragma.


File: gnat_rm.info,  Node: Pragma Assert,  Next: Pragma Assert_And_Cut,  Prev: Pragma Annotate,  Up: Implementation Defined Pragmas

2.11 Pragma Assert
==================

Syntax:

    pragma Assert (
      boolean_EXPRESSION
      [, string_EXPRESSION]);

The effect of this pragma depends on whether the corresponding command
line switch is set to activate assertions.  The pragma expands into code
equivalent to the following:

    if assertions-enabled then
       if not boolean_EXPRESSION then
          System.Assertions.Raise_Assert_Failure
            (string_EXPRESSION);
       end if;
    end if;

The string argument, if given, is the message that will be associated
with the exception occurrence if the exception is raised.  If no second
argument is given, the default message is `file':`nnn', where `file' is
the name of the source file containing the assert, and `nnn' is the
line number of the assert.  A pragma is not a statement, so if a
statement sequence contains nothing but a pragma assert, then a null
statement is required in addition, as in:

    ...
    if J > 3 then
       pragma Assert (K > 3, "Bad value for K");
       null;
    end if;

Note that, as with the `if' statement to which it is equivalent, the
type of the expression is either `Standard.Boolean', or any type derived
from this standard type.

Assert checks can be either checked or ignored. By default they are
ignored.  They will be checked if either the command line switch
`-gnata' is used, or if an `Assertion_Policy' or `Check_Policy' pragma
is used to enable `Assert_Checks'.

If assertions are ignored, then there is no run-time effect (and in
particular, any side effects from the expression will not occur at run
time).  (The expression is still analyzed at compile time, and may
cause types to be frozen if they are mentioned here for the first time).

If assertions are checked, then the given expression is tested, and if
it is `False' then `System.Assertions.Raise_Assert_Failure' is called
which results in the raising of `Assert_Failure' with the given message.

You should generally avoid side effects in the expression arguments of
this pragma, because these side effects will turn on and off with the
setting of the assertions mode, resulting in assertions that have an
effect on the program.  However, the expressions are analyzed for
semantic correctness whether or not assertions are enabled, so turning
assertions on and off cannot affect the legality of a program.

Note that the implementation defined policy `DISABLE', given in a
pragma `Assertion_Policy', can be used to suppress this semantic
analysis.

Note: this is a standard language-defined pragma in versions of Ada
from 2005 on. In GNAT, it is implemented in all versions of Ada, and
the DISABLE policy is an implementation-defined addition.


File: gnat_rm.info,  Node: Pragma Assert_And_Cut,  Next: Pragma Assertion_Policy,  Prev: Pragma Assert,  Up: Implementation Defined Pragmas

2.12 Pragma Assert_And_Cut
==========================

Syntax:

    pragma Assert_And_Cut (
      boolean_EXPRESSION
      [, string_EXPRESSION]);

The effect of this pragma is identical to that of pragma `Assert',
except that in an `Assertion_Policy' pragma, the identifier
`Assert_And_Cut' is used to control whether it is ignored or checked
(or disabled).

The intention is that this be used within a subprogram when the given
test expresion sums up all the work done so far in the subprogram, so
that the rest of the subprogram can be verified (informally or
formally) using only the entry preconditions, and the expression in
this pragma. This allows dividing up a subprogram into sections for the
purposes of testing or formal verification. The pragma also serves as
useful documentation.


File: gnat_rm.info,  Node: Pragma Assertion_Policy,  Next: Pragma Assume,  Prev: Pragma Assert_And_Cut,  Up: Implementation Defined Pragmas

2.13 Pragma Assertion_Policy
============================

Syntax:

    pragma Assertion_Policy (CHECK | DISABLE | IGNORE);

    pragma Assertion_Policy (
        ASSERTION_KIND => POLICY_IDENTIFIER
     {, ASSERTION_KIND => POLICY_IDENTIFIER});

    ASSERTION_KIND ::= RM_ASSERTION_KIND | ID_ASSERTION_KIND

    RM_ASSERTION_KIND ::= Assert               |
                          Static_Predicate     |
                          Dynamic_Predicate    |
                          Pre                  |
                          Pre'Class            |
                          Post                 |
                          Post'Class           |
                          Type_Invariant       |
                          Type_Invariant'Class

    ID_ASSERTION_KIND ::= Assertions           |
                          Assert_And_Cut       |
                          Assume               |
                          Contract_Cases       |
                          Debug                |
                          Invariant            |
                          Invariant'Class      |
                          Loop_Invariant       |
                          Loop_Variant         |
                          Postcondition        |
                          Precondition         |
                          Predicate            |
                          Refined_Post         |
                          Statement_Assertions

    POLICY_IDENTIFIER ::= Check | Disable | Ignore

This is a standard Ada 2012 pragma that is available as an
implementation-defined pragma in earlier versions of Ada.  The
assertion kinds `RM_ASSERTION_KIND' are those defined in the Ada
standard. The assertion kinds `ID_ASSERTION_KIND' are implementation
defined additions recognized by the GNAT compiler.

The pragma applies in both cases to pragmas and aspects with matching
names, e.g. `Pre' applies to the Pre aspect, and `Precondition' applies
to both the `Precondition' pragma and the aspect `Precondition'. Note
that the identifiers for pragmas Pre_Class and Post_Class are Pre'Class
and Post'Class (not Pre_Class and Post_Class), since these pragmas are
intended to be identical to the corresponding aspects).

If the policy is `CHECK', then assertions are enabled, i.e.  the
corresponding pragma or aspect is activated.  If the policy is
`IGNORE', then assertions are ignored, i.e.  the corresponding pragma
or aspect is deactivated.  This pragma overrides the effect of the
`-gnata' switch on the command line.

The implementation defined policy `DISABLE' is like `IGNORE' except
that it completely disables semantic checking of the corresponding
pragma or aspect. This is useful when the pragma or aspect argument
references subprograms in a with'ed package which is replaced by a
dummy package for the final build.

The implementation defined assertion kind `Assertions' applies to all
assertion kinds. The form with no assertion kind given implies this
choice, so it applies to all assertion kinds (RM defined, and
implementation defined).

The implementation defined assertion kind `Statement_Assertions'
applies to `Assert', `Assert_And_Cut', `Assume', `Loop_Invariant', and
`Loop_Variant'.


File: gnat_rm.info,  Node: Pragma Assume,  Next: Pragma Assume_No_Invalid_Values,  Prev: Pragma Assertion_Policy,  Up: Implementation Defined Pragmas

2.14 Pragma Assume
==================

Syntax:

    pragma Assume (
      boolean_EXPRESSION
      [, string_EXPRESSION]);

The effect of this pragma is identical to that of pragma `Assert',
except that in an `Assertion_Policy' pragma, the identifier `Assume' is
used to control whether it is ignored or checked (or disabled).

The intention is that this be used for assumptions about the external
environment. So you cannot expect to verify formally or informally that
the condition is met, this must be established by examining things
outside the program itself.  For example, we may have code that depends
on the size of `Long_Long_Integer' being at least 64. So we could write:

    pragma Assume (Long_Long_Integer'Size >= 64);

This assumption cannot be proved from the program itself, but it acts
as a useful run-time check that the assumption is met, and documents
the need to ensure that it is met by reference to information outside
the program.


File: gnat_rm.info,  Node: Pragma Assume_No_Invalid_Values,  Next: Pragma Async_Readers,  Prev: Pragma Assume,  Up: Implementation Defined Pragmas

2.15 Pragma Assume_No_Invalid_Values
====================================

Syntax:

    pragma Assume_No_Invalid_Values (On | Off);

This is a configuration pragma that controls the assumptions made by the
compiler about the occurrence of invalid representations (invalid
values) in the code.

The default behavior (corresponding to an Off argument for this
pragma), is to assume that values may in general be invalid unless the
compiler can prove they are valid. Consider the following example:

    V1 : Integer range 1 .. 10;
    V2 : Integer range 11 .. 20;
    ...
    for J in V2 .. V1 loop
       ...
    end loop;

if V1 and V2 have valid values, then the loop is known at compile time
not to execute since the lower bound must be greater than the upper
bound. However in default mode, no such assumption is made, and the
loop may execute. If `Assume_No_Invalid_Values (On)' is given, the
compiler will assume that any occurrence of a variable other than in an
explicit `'Valid' test always has a valid value, and the loop above
will be optimized away.

The use of `Assume_No_Invalid_Values (On)' is appropriate if you know
your code is free of uninitialized variables and other possible sources
of invalid representations, and may result in more efficient code. A
program that accesses an invalid representation with this pragma in
effect is erroneous, so no guarantees can be made about its behavior.

It is peculiar though permissible to use this pragma in conjunction
with validity checking (-gnatVa). In such cases, accessing invalid
values will generally give an exception, though formally the program is
erroneous so there are no guarantees that this will always be the case,
and it is recommended that these two options not be used together.


File: gnat_rm.info,  Node: Pragma Async_Readers,  Next: Pragma Async_Writers,  Prev: Pragma Assume_No_Invalid_Values,  Up: Implementation Defined Pragmas

2.16 Pragma Async_Readers
=========================

For the description of this pragma, see SPARK 2014 Reference Manual,
section 7.1.2.


File: gnat_rm.info,  Node: Pragma Async_Writers,  Next: Pragma Attribute_Definition,  Prev: Pragma Async_Readers,  Up: Implementation Defined Pragmas

2.17 Pragma Async_Writers
=========================

For the description of this pragma, see SPARK 2014 Reference Manual,
section 7.1.2.


File: gnat_rm.info,  Node: Pragma Attribute_Definition,  Next: Pragma C_Pass_By_Copy,  Prev: Pragma Async_Writers,  Up: Implementation Defined Pragmas

2.18 Pragma Attribute_Definition
================================

Syntax:

    pragma Attribute_Definition
      ([Attribute  =>] ATTRIBUTE_DESIGNATOR,
       [Entity     =>] LOCAL_NAME,
       [Expression =>] EXPRESSION | NAME);

If `Attribute' is a known attribute name, this pragma is equivalent to
the attribute definition clause:

    for Entity'Attribute use Expression;

If `Attribute' is not a recognized attribute name, the pragma is
ignored, and a warning is emitted. This allows source code to be
written that takes advantage of some new attribute, while remaining
compilable with earlier compilers.


File: gnat_rm.info,  Node: Pragma C_Pass_By_Copy,  Next: Pragma Check,  Prev: Pragma Attribute_Definition,  Up: Implementation Defined Pragmas

2.19 Pragma C_Pass_By_Copy
==========================

Syntax:

    pragma C_Pass_By_Copy
      ([Max_Size =>] static_integer_EXPRESSION);

Normally the default mechanism for passing C convention records to C
convention subprograms is to pass them by reference, as suggested by RM
B.3(69).  Use the configuration pragma `C_Pass_By_Copy' to change this
default, by requiring that record formal parameters be passed by copy
if all of the following conditions are met:

   * The size of the record type does not exceed the value specified for
     `Max_Size'.

   * The record type has `Convention C'.

   * The formal parameter has this record type, and the subprogram has a
     foreign (non-Ada) convention.

If these conditions are met the argument is passed by copy; i.e., in a
manner consistent with what C expects if the corresponding formal in the
C prototype is a struct (rather than a pointer to a struct).

You can also pass records by copy by specifying the convention
`C_Pass_By_Copy' for the record type, or by using the extended `Import'
and `Export' pragmas, which allow specification of passing mechanisms
on a parameter by parameter basis.


File: gnat_rm.info,  Node: Pragma Check,  Next: Pragma Check_Float_Overflow,  Prev: Pragma C_Pass_By_Copy,  Up: Implementation Defined Pragmas

2.20 Pragma Check
=================

Syntax:

    pragma Check (
         [Name    =>] CHECK_KIND,
         [Check   =>] Boolean_EXPRESSION
      [, [Message =>] string_EXPRESSION] );

    CHECK_KIND ::= IDENTIFIER           |
                   Pre'Class            |
                   Post'Class           |
                   Type_Invariant'Class |
                   Invariant'Class

This pragma is similar to the predefined pragma `Assert' except that an
extra identifier argument is present. In conjunction with pragma
`Check_Policy', this can be used to define groups of assertions that can
be independently controlled. The identifier `Assertion' is special, it
refers to the normal set of pragma `Assert' statements.

Checks introduced by this pragma are normally deactivated by default.
They can be activated either by the command line option `-gnata', which
turns on all checks, or individually controlled using pragma
`Check_Policy'.

The identifiers `Assertions' and `Statement_Assertions' are not
permitted as check kinds, since this would cause confusion with the use
of these identifiers in `Assertion_Policy' and `Check_Policy' pragmas,
where they are used to refer to sets of assertions.


File: gnat_rm.info,  Node: Pragma Check_Float_Overflow,  Next: Pragma Check_Name,  Prev: Pragma Check,  Up: Implementation Defined Pragmas

2.21 Pragma Check_Float_Overflow
================================

Syntax:

    pragma Check_Float_Overflow;

In Ada, the predefined floating-point types (`Short_Float', `Float',
`Long_Float', `Long_Long_Float') are defined to be `unconstrained'.
This means that even though each has a well-defined base range, an
operation that delivers a result outside this base range is not
required to raise an exception.  This implementation permission
accommodates the notion of infinities in IEEE floating-point, and
corresponds to the efficient execution mode on most machines. GNAT will
not raise overflow exceptions on these machines; instead it will
generate infinities and NaN's as defined in the IEEE standard.

Generating infinities, although efficient, is not always desirable.
Often the preferable approach is to check for overflow, even at the
(perhaps considerable) expense of run-time performance.  This can be
accomplished by defining your own constrained floating-point subtypes -
i.e., by supplying explicit range constraints - and indeed such a
subtype can have the same base range as its base type. For example:

    subtype My_Float is Float range Float'Range;

Here `My_Float' has the same range as `Float' but is constrained, so
operations on `My_Float' values will be checked for overflow against
this range.

This style will achieve the desired goal, but it is often more
convenient to be able to simply use the standard predefined
floating-point types as long as overflow checking could be guaranteed.
The `Check_Float_Overflow' configuration pragma achieves this effect.
If a unit is compiled subject to this configuration pragma, then all
operations on predefined floating-point types including operations on
base types of these floating-point types will be treated as though
those types were constrained, and overflow checks will be generated.
The `Constraint_Error' exception is raised if the result is out of
range.

This mode can also be set by use of the compiler switch `-gnateF'.


File: gnat_rm.info,  Node: Pragma Check_Name,  Next: Pragma Check_Policy,  Prev: Pragma Check_Float_Overflow,  Up: Implementation Defined Pragmas

2.22 Pragma Check_Name
======================

Syntax:

    pragma Check_Name (check_name_IDENTIFIER);

This is a configuration pragma that defines a new implementation
defined check name (unless IDENTIFIER matches one of the predefined
check names, in which case the pragma has no effect). Check names are
global to a partition, so if two or more configuration pragmas are
present in a partition mentioning the same name, only one new check
name is introduced.

An implementation defined check name introduced with this pragma may be
used in only three contexts: `pragma Suppress', `pragma Unsuppress',
and as the prefix of a `Check_Name'Enabled' attribute reference. For
any of these three cases, the check name must be visible. A check name
is visible if it is in the configuration pragmas applying to the
current unit, or if it appears at the start of any unit that is part of
the dependency set of the current unit (e.g., units that are mentioned
in `with' clauses).

Check names introduced by this pragma are subject to control by compiler
switches (in particular -gnatp) in the usual manner.


File: gnat_rm.info,  Node: Pragma Check_Policy,  Next: Pragma CIL_Constructor,  Prev: Pragma Check_Name,  Up: Implementation Defined Pragmas

2.23 Pragma Check_Policy
========================

Syntax:

    pragma Check_Policy
     ([Name   =>] CHECK_KIND,
      [Policy =>] POLICY_IDENTIFIER);

    pragma Check_Policy (
        CHECK_KIND => POLICY_IDENTIFIER
     {, CHECK_KIND => POLICY_IDENTIFIER});

    ASSERTION_KIND ::= RM_ASSERTION_KIND | ID_ASSERTION_KIND

    CHECK_KIND ::= IDENTIFIER           |
                   Pre'Class            |
                   Post'Class           |
                   Type_Invariant'Class |
                   Invariant'Class

    The identifiers Name and Policy are not allowed as CHECK_KIND values. This
    avoids confusion between the two possible syntax forms for this pragma.

    POLICY_IDENTIFIER ::= ON | OFF | CHECK | DISABLE | IGNORE

This pragma is used to set the checking policy for assertions (specified
by aspects or pragmas), the `Debug' pragma, or additional checks to be
checked using the `Check' pragma. It may appear either as a
configuration pragma, or within a declarative part of package. In the
latter case, it applies from the point where it appears to the end of
the declarative region (like pragma `Suppress').

The `Check_Policy' pragma is similar to the predefined
`Assertion_Policy' pragma, and if the check kind corresponds to one of
the assertion kinds that are allowed by `Assertion_Policy', then the
effect is identical.

If the first argument is Debug, then the policy applies to Debug
pragmas, disabling their effect if the policy is `OFF', `DISABLE', or
`IGNORE', and allowing them to execute with normal semantics if the
policy is `ON' or `CHECK'. In addition if the policy is `DISABLE', then
the procedure call in `Debug' pragmas will be totally ignored and not
analyzed semantically.

Finally the first argument may be some other identifier than the above
possibilities, in which case it controls a set of named assertions that
can be checked using pragma `Check'. For example, if the pragma:

    pragma Check_Policy (Critical_Error, OFF);

is given, then subsequent `Check' pragmas whose first argument is also
`Critical_Error' will be disabled.

The check policy is `OFF' to turn off corresponding checks, and `ON' to
turn on corresponding checks. The default for a set of checks for which
no `Check_Policy' is given is `OFF' unless the compiler switch `-gnata'
is given, which turns on all checks by default.

The check policy settings `CHECK' and `IGNORE' are recognized as
synonyms for `ON' and `OFF'. These synonyms are provided for
compatibility with the standard `Assertion_Policy' pragma. The check
policy setting `DISABLE' causes the second argument of a corresponding
`Check' pragma to be completely ignored and not analyzed.


File: gnat_rm.info,  Node: Pragma CIL_Constructor,  Next: Pragma Comment,  Prev: Pragma Check_Policy,  Up: Implementation Defined Pragmas

2.24 Pragma CIL_Constructor
===========================

Syntax:

    pragma CIL_Constructor ([Entity =>] function_LOCAL_NAME);

This pragma is used to assert that the specified Ada function should be
mapped to the .NET constructor for some Ada tagged record type.

See section 4.1 of the `GNAT User's Guide: Supplement for the .NET
Platform.'  for related information.


File: gnat_rm.info,  Node: Pragma Comment,  Next: Pragma Common_Object,  Prev: Pragma CIL_Constructor,  Up: Implementation Defined Pragmas

2.25 Pragma Comment
===================

Syntax:

    pragma Comment (static_string_EXPRESSION);

This is almost identical in effect to pragma `Ident'.  It allows the
placement of a comment into the object file and hence into the
executable file if the operating system permits such usage.  The
difference is that `Comment', unlike `Ident', has no limitations on
placement of the pragma (it can be placed anywhere in the main source
unit), and if more than one pragma is used, all comments are retained.


File: gnat_rm.info,  Node: Pragma Common_Object,  Next: Pragma Compile_Time_Error,  Prev: Pragma Comment,  Up: Implementation Defined Pragmas

2.26 Pragma Common_Object
=========================

Syntax:

    pragma Common_Object (
         [Internal =>] LOCAL_NAME
      [, [External =>] EXTERNAL_SYMBOL]
      [, [Size     =>] EXTERNAL_SYMBOL] );

    EXTERNAL_SYMBOL ::=
      IDENTIFIER
    | static_string_EXPRESSION

This pragma enables the shared use of variables stored in overlaid
linker areas corresponding to the use of `COMMON' in Fortran.  The
single object `LOCAL_NAME' is assigned to the area designated by the
`External' argument.  You may define a record to correspond to a series
of fields.  The `Size' argument is syntax checked in GNAT, but
otherwise ignored.

`Common_Object' is not supported on all platforms.  If no support is
available, then the code generator will issue a message indicating that
the necessary attribute for implementation of this pragma is not
available.


File: gnat_rm.info,  Node: Pragma Compile_Time_Error,  Next: Pragma Compile_Time_Warning,  Prev: Pragma Common_Object,  Up: Implementation Defined Pragmas

2.27 Pragma Compile_Time_Error
==============================

Syntax:

    pragma Compile_Time_Error
             (boolean_EXPRESSION, static_string_EXPRESSION);

This pragma can be used to generate additional compile time error
messages. It is particularly useful in generics, where errors can be
issued for specific problematic instantiations. The first parameter is
a boolean expression. The pragma is effective only if the value of this
expression is known at compile time, and has the value True. The set of
expressions whose values are known at compile time includes all static
boolean expressions, and also other values which the compiler can
determine at compile time (e.g., the size of a record type set by an
explicit size representation clause, or the value of a variable which
was initialized to a constant and is known not to have been modified).
If these conditions are met, an error message is generated using the
value given as the second argument. This string value may contain
embedded ASCII.LF characters to break the message into multiple lines.


File: gnat_rm.info,  Node: Pragma Compile_Time_Warning,  Next: Pragma Compiler_Unit,  Prev: Pragma Compile_Time_Error,  Up: Implementation Defined Pragmas

2.28 Pragma Compile_Time_Warning
================================

Syntax:

    pragma Compile_Time_Warning
             (boolean_EXPRESSION, static_string_EXPRESSION);

Same as pragma Compile_Time_Error, except a warning is issued instead
of an error message. Note that if this pragma is used in a package that
is with'ed by a client, the client will get the warning even though it
is issued by a with'ed package (normally warnings in with'ed units are
suppressed, but this is a special exception to that rule).

One typical use is within a generic where compile time known
characteristics of formal parameters are tested, and warnings given
appropriately. Another use with a first parameter of True is to warn a
client about use of a package, for example that it is not fully
implemented.


File: gnat_rm.info,  Node: Pragma Compiler_Unit,  Next: Pragma Compiler_Unit_Warning,  Prev: Pragma Compile_Time_Warning,  Up: Implementation Defined Pragmas

2.29 Pragma Compiler_Unit
=========================

Syntax:

    pragma Compiler_Unit;

This pragma is obsolete. It is equivalent to Compiler_Unit_Warning. It
is retained so that old versions of the GNAT run-time that use this
pragma can be compiled with newer versions of the compiler.


File: gnat_rm.info,  Node: Pragma Compiler_Unit_Warning,  Next: Pragma Complete_Representation,  Prev: Pragma Compiler_Unit,  Up: Implementation Defined Pragmas

2.30 Pragma Compiler_Unit_Warning
=================================

Syntax:

    pragma Compiler_Unit_Warning;

This pragma is intended only for internal use in the GNAT run-time
library.  It indicates that the unit is used as part of the compiler
build. The effect is to generate warnings for the use of constructs
(for example, conditional expressions) that would cause trouble when
bootstrapping using an older version of GNAT. For the exact list of
restrictions, see the compiler sources and references to
Check_Compiler_Unit.


File: gnat_rm.info,  Node: Pragma Complete_Representation,  Next: Pragma Complex_Representation,  Prev: Pragma Compiler_Unit_Warning,  Up: Implementation Defined Pragmas

2.31 Pragma Complete_Representation
===================================

Syntax:

    pragma Complete_Representation;

This pragma must appear immediately within a record representation
clause. Typical placements are before the first component clause or
after the last component clause. The effect is to give an error message
if any component is missing a component clause. This pragma may be used
to ensure that a record representation clause is complete, and that
this invariant is maintained if fields are added to the record in the
future.


File: gnat_rm.info,  Node: Pragma Complex_Representation,  Next: Pragma Component_Alignment,  Prev: Pragma Complete_Representation,  Up: Implementation Defined Pragmas

2.32 Pragma Complex_Representation
==================================

Syntax:

    pragma Complex_Representation
            ([Entity =>] LOCAL_NAME);

The `Entity' argument must be the name of a record type which has two
fields of the same floating-point type.  The effect of this pragma is
to force gcc to use the special internal complex representation form for
this record, which may be more efficient.  Note that this may result in
the code for this type not conforming to standard ABI (application
binary interface) requirements for the handling of record types.  For
example, in some environments, there is a requirement for passing
records by pointer, and the use of this pragma may result in passing
this type in floating-point registers.


File: gnat_rm.info,  Node: Pragma Component_Alignment,  Next: Pragma Contract_Cases,  Prev: Pragma Complex_Representation,  Up: Implementation Defined Pragmas

2.33 Pragma Component_Alignment
===============================

Syntax:

    pragma Component_Alignment (
         [Form =>] ALIGNMENT_CHOICE
      [, [Name =>] type_LOCAL_NAME]);

    ALIGNMENT_CHOICE ::=
      Component_Size
    | Component_Size_4
    | Storage_Unit
    | Default

Specifies the alignment of components in array or record types.  The
meaning of the `Form' argument is as follows:

 
`Component_Size'
     Aligns scalar components and subcomponents of the array or record
     type on boundaries appropriate to their inherent size (naturally
     aligned).  For example, 1-byte components are aligned on byte
     boundaries, 2-byte integer components are aligned on 2-byte
     boundaries, 4-byte integer components are aligned on 4-byte
     boundaries and so on.  These alignment rules correspond to the
     normal rules for C compilers on all machines except the VAX.

`Component_Size_4'
     Naturally aligns components with a size of four or fewer bytes.
     Components that are larger than 4 bytes are placed on the next
     4-byte boundary.

`Storage_Unit'
     Specifies that array or record components are byte aligned, i.e.,
     aligned on boundaries determined by the value of the constant
     `System.Storage_Unit'.

`Default'
     Specifies that array or record components are aligned on default
     boundaries, appropriate to the underlying hardware or operating
     system or both. The `Default' choice is the same as
     `Component_Size' (natural alignment).

If the `Name' parameter is present, `type_LOCAL_NAME' must refer to a
local record or array type, and the specified alignment choice applies
to the specified type.  The use of `Component_Alignment' together with
a pragma `Pack' causes the `Component_Alignment' pragma to be ignored.
The use of `Component_Alignment' together with a record representation
clause is only effective for fields not specified by the representation
clause.

If the `Name' parameter is absent, the pragma can be used as either a
configuration pragma, in which case it applies to one or more units in
accordance with the normal rules for configuration pragmas, or it can be
used within a declarative part, in which case it applies to types that
are declared within this declarative part, or within any nested scope
within this declarative part.  In either case it specifies the alignment
to be applied to any record or array type which has otherwise standard
representation.

If the alignment for a record or array type is not specified (using
pragma `Pack', pragma `Component_Alignment', or a record rep clause),
the GNAT uses the default alignment as described previously.


File: gnat_rm.info,  Node: Pragma Contract_Cases,  Next: Pragma Convention_Identifier,  Prev: Pragma Component_Alignment,  Up: Implementation Defined Pragmas

2.34 Pragma Contract_Cases
==========================

Syntax:

    pragma Contract_Cases (
       Condition => Consequence
     {,Condition => Consequence});

The `Contract_Cases' pragma allows defining fine-grain specifications
that can complement or replace the contract given by a precondition and
a postcondition. Additionally, the `Contract_Cases' pragma can be used
by testing and formal verification tools. The compiler checks its
validity and, depending on the assertion policy at the point of
declaration of the pragma, it may insert a check in the executable. For
code generation, the contract cases

    pragma Contract_Cases (
      Cond1 => Pred1,
      Cond2 => Pred2);

are equivalent to

    C1 : constant Boolean := Cond1;  --  evaluated at subprogram entry
    C2 : constant Boolean := Cond2;  --  evaluated at subprogram entry
    pragma Precondition ((C1 and not C2) or (C2 and not C1));
    pragma Postcondition (if C1 then Pred1);
    pragma Postcondition (if C2 then Pred2);

The precondition ensures that one and only one of the conditions is
satisfied on entry to the subprogram.  The postcondition ensures that
for the condition that was True on entry, the corrresponding
consequence is True on exit. Other consequence expressions are not
evaluated.

A precondition `P' and postcondition `Q' can also be expressed as
contract cases:

    pragma Contract_Cases (P => Q);

The placement and visibility rules for `Contract_Cases' pragmas are
identical to those described for preconditions and postconditions.

The compiler checks that boolean expressions given in conditions and
consequences are valid, where the rules for conditions are the same as
the rule for an expression in `Precondition' and the rules for
consequences are the same as the rule for an expression in
`Postcondition'. In particular, attributes `'Old' and `'Result' can
only be used within consequence expressions.  The condition for the
last contract case may be `others', to denote any case not captured by
the previous cases. The following is an example of use within a package
spec:

    package Math_Functions is
       ...
       function Sqrt (Arg : Float) return Float;
       pragma Contract_Cases ((Arg in 0 .. 99) => Sqrt'Result < 10,
                              Arg >= 100       => Sqrt'Result >= 10,
                              others           => Sqrt'Result = 0);
       ...
    end Math_Functions;

The meaning of contract cases is that only one case should apply at each
call, as determined by the corresponding condition evaluating to True,
and that the consequence for this case should hold when the subprogram
returns.


File: gnat_rm.info,  Node: Pragma Convention_Identifier,  Next: Pragma CPP_Class,  Prev: Pragma Contract_Cases,  Up: Implementation Defined Pragmas

2.35 Pragma Convention_Identifier
=================================

Syntax:

    pragma Convention_Identifier (
             [Name =>]       IDENTIFIER,
             [Convention =>] convention_IDENTIFIER);

This pragma provides a mechanism for supplying synonyms for existing
convention identifiers. The `Name' identifier can subsequently be used
as a synonym for the given convention in other pragmas (including for
example pragma `Import' or another `Convention_Identifier' pragma). As
an example of the use of this, suppose you had legacy code which used
Fortran77 as the identifier for Fortran. Then the pragma:

    pragma Convention_Identifier (Fortran77, Fortran);

would allow the use of the convention identifier `Fortran77' in
subsequent code, avoiding the need to modify the sources. As another
example, you could use this to parameterize convention requirements
according to systems. Suppose you needed to use `Stdcall' on windows
systems, and `C' on some other system, then you could define a
convention identifier `Library' and use a single
`Convention_Identifier' pragma to specify which convention would be
used system-wide.


File: gnat_rm.info,  Node: Pragma CPP_Class,  Next: Pragma CPP_Constructor,  Prev: Pragma Convention_Identifier,  Up: Implementation Defined Pragmas

2.36 Pragma CPP_Class
=====================

Syntax:

    pragma CPP_Class ([Entity =>] LOCAL_NAME);

The argument denotes an entity in the current declarative region that is
declared as a record type. It indicates that the type corresponds to an
externally declared C++ class type, and is to be laid out the same way
that C++ would lay out the type. If the C++ class has virtual primitives
then the record must be declared as a tagged record type.

Types for which `CPP_Class' is specified do not have assignment or
equality operators defined (such operations can be imported or declared
as subprograms as required). Initialization is allowed only by
constructor functions (see pragma `CPP_Constructor'). Such types are
implicitly limited if not explicitly declared as limited or derived
from a limited type, and an error is issued in that case.

See *Note Interfacing to C++: 3f. for related information.

Note: Pragma `CPP_Class' is currently obsolete. It is supported for
backward compatibility but its functionality is available using pragma
`Import' with `Convention' = `CPP'.


File: gnat_rm.info,  Node: Pragma CPP_Constructor,  Next: Pragma CPP_Virtual,  Prev: Pragma CPP_Class,  Up: Implementation Defined Pragmas

2.37 Pragma CPP_Constructor
===========================

Syntax:

    pragma CPP_Constructor ([Entity =>] LOCAL_NAME
      [, [External_Name =>] static_string_EXPRESSION ]
      [, [Link_Name     =>] static_string_EXPRESSION ]);

This pragma identifies an imported function (imported in the usual way
with pragma `Import') as corresponding to a C++ constructor. If
`External_Name' and `Link_Name' are not specified then the `Entity'
argument is a name that must have been previously mentioned in a pragma
`Import' with `Convention' = `CPP'. Such name must be of one of the
following forms:

   * `function' `Fname' `return' T`

   * `function' `Fname' `return' T'Class

   * `function' `Fname' (...) `return' T`

   * `function' `Fname' (...) `return' T'Class

where `T' is a limited record type imported from C++ with pragma
`Import' and `Convention' = `CPP'.

The first two forms import the default constructor, used when an object
of type `T' is created on the Ada side with no explicit constructor.
The latter two forms cover all the non-default constructors of the type.
See the GNAT User's Guide for details.

If no constructors are imported, it is impossible to create any objects
on the Ada side and the type is implicitly declared abstract.

Pragma `CPP_Constructor' is intended primarily for automatic generation
using an automatic binding generator tool (such as the `-fdump-ada-spec'
GCC switch).  See *Note Interfacing to C++: 3f. for more related
information.

Note: The use of functions returning class-wide types for constructors
is currently obsolete. They are supported for backward compatibility.
The use of functions returning the type T leave the Ada sources more
clear because the imported C++ constructors always return an object of
type T; that is, they never return an object whose type is a descendant
of type T.


File: gnat_rm.info,  Node: Pragma CPP_Virtual,  Next: Pragma CPP_Vtable,  Prev: Pragma CPP_Constructor,  Up: Implementation Defined Pragmas

2.38 Pragma CPP_Virtual
=======================

This pragma is now obsolete and, other than generating a warning if
warnings on obsolescent features are enabled, is completely ignored.
It is retained for compatibility purposes. It used to be required to
ensure compoatibility with C++, but is no longer required for that
purpose because GNAT generates the same object layout as the G++
compiler by default.

See *Note Interfacing to C++: 3f. for related information.


File: gnat_rm.info,  Node: Pragma CPP_Vtable,  Next: Pragma CPU,  Prev: Pragma CPP_Virtual,  Up: Implementation Defined Pragmas

2.39 Pragma CPP_Vtable
======================

This pragma is now obsolete and, other than generating a warning if
warnings on obsolescent features are enabled, is completely ignored.
It used to be required to ensure compatibility with C++, but is no
longer required for that purpose because GNAT generates the same object
layout as the G++ compiler by default.

See *Note Interfacing to C++: 3f. for related information.


File: gnat_rm.info,  Node: Pragma CPU,  Next: Pragma Debug,  Prev: Pragma CPP_Vtable,  Up: Implementation Defined Pragmas

2.40 Pragma CPU
===============

Syntax:

    pragma CPU (EXPRESSION);

This pragma is standard in Ada 2012, but is available in all earlier
versions of Ada as an implementation-defined pragma.  See Ada 2012
Reference Manual for details.


File: gnat_rm.info,  Node: Pragma Debug,  Next: Pragma Debug_Policy,  Prev: Pragma CPU,  Up: Implementation Defined Pragmas

2.41 Pragma Debug
=================

Syntax:

    pragma Debug ([CONDITION, ]PROCEDURE_CALL_WITHOUT_SEMICOLON);

    PROCEDURE_CALL_WITHOUT_SEMICOLON ::=
      PROCEDURE_NAME
    | PROCEDURE_PREFIX ACTUAL_PARAMETER_PART

The procedure call argument has the syntactic form of an expression,
meeting the syntactic requirements for pragmas.

If debug pragmas are not enabled or if the condition is present and
evaluates to False, this pragma has no effect. If debug pragmas are
enabled, the semantics of the pragma is exactly equivalent to the
procedure call statement corresponding to the argument with a
terminating semicolon. Pragmas are permitted in sequences of
declarations, so you can use pragma `Debug' to intersperse calls to
debug procedures in the middle of declarations. Debug pragmas can be
enabled either by use of the command line switch `-gnata' or by use of
the pragma `Check_Policy' with a first argument of `Debug'.


File: gnat_rm.info,  Node: Pragma Debug_Policy,  Next: Pragma Default_Scalar_Storage_Order,  Prev: Pragma Debug,  Up: Implementation Defined Pragmas

2.42 Pragma Debug_Policy
========================

Syntax:

    pragma Debug_Policy (CHECK | DISABLE | IGNORE | ON | OFF);

This pragma is equivalent to a corresponding `Check_Policy' pragma with
a first argument of `Debug'. It is retained for historical
compatibility reasons.


File: gnat_rm.info,  Node: Pragma Default_Scalar_Storage_Order,  Next: Pragma Default_Storage_Pool,  Prev: Pragma Debug_Policy,  Up: Implementation Defined Pragmas

2.43 Pragma Default_Scalar_Storage_Order
========================================

Syntax:

    pragma Default_Scalar_Storage_Order (High_Order_First | Low_Order_First);

Normally if no explicit `Scalar_Storage_Order' is given for a record
type or array type, then the scalar storage order defaults to the
ordinary default for the target. But this default may be overridden
using this pragma.  The pragma may appear as a configuration pragma, or
locally within a package spec or declarative part. In the latter case,
it applies to all subsequent types declared within that package spec or
declarative part.

The following example shows the use of this pragma:

    pragma Default_Scalar_Storage_Order (High_Order_First);
    with System; use System;
    package DSSO1 is
       type H1 is record
          a : Integer;
       end record;

       type L2 is record
          a : Integer;
       end record;
       for L2'Scalar_Storage_Order use Low_Order_First;

       type L2a is new L2;

       package Inner is
          type H3 is record
             a : Integer;
          end record;

          pragma Default_Scalar_Storage_Order (Low_Order_First);

          type L4 is record
             a : Integer;
          end record;
       end Inner;

       type H4a is new Inner.L4;

       type H5 is record
          a : Integer;
       end record;
    end DSSO1;

In this example record types L.. have `Low_Order_First' scalar storage
order, and record types H.. have `High_Order_First'.  Note that in the
case of `H4a', the order is not inherited from the parent type. Only an
explicitly set `Scalar_Storage_Order' gets inherited on type derivation.

If this pragma is used as a configuration pragma which appears within a
configuration pragma file (as opposed to appearing explicitly at the
start of a single unit), then the binder will require that all units in
a partition be compiled in a similar manner, other than run-time units,
which are not affected by this pragma. Note that the use of this form
is discouraged because it may significantly degrade the run-time
performance of the software, instead the default scalar storage order
ought to be changed only on a local basis.


File: gnat_rm.info,  Node: Pragma Default_Storage_Pool,  Next: Pragma Depends,  Prev: Pragma Default_Scalar_Storage_Order,  Up: Implementation Defined Pragmas

2.44 Pragma Default_Storage_Pool
================================

Syntax:

    pragma Default_Storage_Pool (storage_pool_NAME | null);

This pragma is standard in Ada 2012, but is available in all earlier
versions of Ada as an implementation-defined pragma.  See Ada 2012
Reference Manual for details.


File: gnat_rm.info,  Node: Pragma Depends,  Next: Pragma Detect_Blocking,  Prev: Pragma Default_Storage_Pool,  Up: Implementation Defined Pragmas

2.45 Pragma Depends
===================

For the description of this pragma, see SPARK 2014 Reference Manual,
section 6.1.5.


File: gnat_rm.info,  Node: Pragma Detect_Blocking,  Next: Pragma Disable_Atomic_Synchronization,  Prev: Pragma Depends,  Up: Implementation Defined Pragmas

2.46 Pragma Detect_Blocking
===========================

Syntax:

    pragma Detect_Blocking;

This is a standard pragma in Ada 2005, that is available in all earlier
versions of Ada as an implementation-defined pragma.

This is a configuration pragma that forces the detection of potentially
blocking operations within a protected operation, and to raise
Program_Error if that happens.


File: gnat_rm.info,  Node: Pragma Disable_Atomic_Synchronization,  Next: Pragma Dispatching_Domain,  Prev: Pragma Detect_Blocking,  Up: Implementation Defined Pragmas

2.47 Pragma Disable_Atomic_Synchronization
==========================================

Syntax:

    pragma Disable_Atomic_Synchronization [(Entity)];

Ada requires that accesses (reads or writes) of an atomic variable be
regarded as synchronization points in the case of multiple tasks.
Particularly in the case of multi-processors this may require special
handling, e.g. the generation of memory barriers. This capability may
be turned off using this pragma in cases where it is known not to be
required.

The placement and scope rules for this pragma are the same as those for
`pragma Suppress'. In particular it can be used as a configuration
pragma, or in a declaration sequence where it applies till the end of
the scope. If an `Entity' argument is present, the action applies only
to that entity.


File: gnat_rm.info,  Node: Pragma Dispatching_Domain,  Next: Pragma Effective_Reads,  Prev: Pragma Disable_Atomic_Synchronization,  Up: Implementation Defined Pragmas

2.48 Pragma Dispatching_Domain
==============================

Syntax:

    pragma Dispatching_Domain (EXPRESSION);

This pragma is standard in Ada 2012, but is available in all earlier
versions of Ada as an implementation-defined pragma.  See Ada 2012
Reference Manual for details.


File: gnat_rm.info,  Node: Pragma Effective_Reads,  Next: Pragma Effective_Writes,  Prev: Pragma Dispatching_Domain,  Up: Implementation Defined Pragmas

2.49 Pragma Effective_Reads
===========================

For the description of this pragma, see SPARK 2014 Reference Manual,
section 7.1.2.


File: gnat_rm.info,  Node: Pragma Effective_Writes,  Next: Pragma Elaboration_Checks,  Prev: Pragma Effective_Reads,  Up: Implementation Defined Pragmas

2.50 Pragma Effective_Writes
============================

For the description of this pragma, see SPARK 2014 Reference Manual,
section 7.1.2.


File: gnat_rm.info,  Node: Pragma Elaboration_Checks,  Next: Pragma Eliminate,  Prev: Pragma Effective_Writes,  Up: Implementation Defined Pragmas

2.51 Pragma Elaboration_Checks
==============================

Syntax:

    pragma Elaboration_Checks (Dynamic | Static);

This is a configuration pragma that provides control over the
elaboration model used by the compilation affected by the pragma.  If
the parameter is `Dynamic', then the dynamic elaboration model
described in the Ada Reference Manual is used, as though the `-gnatE'
switch had been specified on the command line.  If the parameter is
`Static', then the default GNAT static model is used.  This
configuration pragma overrides the setting of the command line.  For
full details on the elaboration models used by the GNAT compiler, see
the chapter on elaboration order handling in the `GNAT User's Guide'.


File: gnat_rm.info,  Node: Pragma Eliminate,  Next: Pragma Enable_Atomic_Synchronization,  Prev: Pragma Elaboration_Checks,  Up: Implementation Defined Pragmas

2.52 Pragma Eliminate
=====================

Syntax:

    pragma Eliminate ([Entity          =>] DEFINING_DESIGNATOR,
                      [Source_Location =>] STRING_LITERAL);

The string literal given for the source location is a string which
specifies the line number of the occurrence of the entity, using the
syntax for SOURCE_TRACE given below:

    SOURCE_TRACE     ::= SOURCE_REFERENCE [LBRACKET SOURCE_TRACE RBRACKET]

    LBRACKET         ::= [
    RBRACKET         ::= ]

    SOURCE_REFERENCE ::= FILE_NAME : LINE_NUMBER

    LINE_NUMBER      ::= DIGIT {DIGIT}

Spaces around the colon in a `Source_Reference' are optional.

The `DEFINING_DESIGNATOR' matches the defining designator used in an
explicit subprogram declaration, where the `entity' name in this
designator appears on the source line specified by the source location.

The source trace that is given as the `Source_Location' shall obey the
following rules. The `FILE_NAME' is the short name (with no directory
information) of an Ada source file, given using exactly the required
syntax for the underlying file system (e.g. case is important if the
underlying operating system is case sensitive). `LINE_NUMBER' gives the
line number of the occurrence of the `entity' as a decimal literal
without an exponent or point. If an `entity' is not declared in a
generic instantiation (this includes generic subprogram instances), the
source trace includes only one source reference. If an entity is
declared inside a generic instantiation, its source trace (when parsing
from left to right) starts with the source location of the declaration
of the entity in the generic unit and ends with the source location of
the instantiation (it is given in square brackets). This approach is
recursively used in case of nested instantiations: the rightmost
(nested most deeply in square brackets) element of the source trace is
the location of the outermost instantiation, the next to left element
is the location of the next (first nested) instantiation in the code of
the corresponding generic unit, and so on, and the leftmost element
(that is out of any square brackets) is the location of the declaration
of the entity to eliminate in a generic unit.

Note that the `Source_Location' argument specifies which of a set of
similarly named entities is being eliminated, dealing both with
overloading, and also appearance of the same entity name in different
scopes.

This pragma indicates that the given entity is not used in the program
to be compiled and built. The effect of the pragma is to allow the
compiler to eliminate the code or data associated with the named
entity. Any reference to an eliminated entity causes a compile-time or
link-time error.

The intention of pragma `Eliminate' is to allow a program to be compiled
in a system-independent manner, with unused entities eliminated, without
needing to modify the source text. Normally the required set of
`Eliminate' pragmas is constructed automatically using the gnatelim
tool.

Any source file change that removes, splits, or adds lines may make the
set of Eliminate pragmas invalid because their `Source_Location'
argument values may get out of date.

Pragma `Eliminate' may be used where the referenced entity is a
dispatching operation. In this case all the subprograms to which the
given operation can dispatch are considered to be unused (are never
called as a result of a direct or a dispatching call).


File: gnat_rm.info,  Node: Pragma Enable_Atomic_Synchronization,  Next: Pragma Export_Function,  Prev: Pragma Eliminate,  Up: Implementation Defined Pragmas

2.53 Pragma Enable_Atomic_Synchronization
=========================================

Syntax:

    pragma Enable_Atomic_Synchronization [(Entity)];

Ada requires that accesses (reads or writes) of an atomic variable be
regarded as synchronization points in the case of multiple tasks.
Particularly in the case of multi-processors this may require special
handling, e.g. the generation of memory barriers. This synchronization
is performed by default, but can be turned off using `pragma
Disable_Atomic_Synchronization'. The `Enable_Atomic_Synchronization'
pragma can be used to turn it back on.

The placement and scope rules for this pragma are the same as those for
`pragma Unsuppress'. In particular it can be used as a configuration
pragma, or in a declaration sequence where it applies till the end of
the scope. If an `Entity' argument is present, the action applies only
to that entity.


File: gnat_rm.info,  Node: Pragma Export_Function,  Next: Pragma Export_Object,  Prev: Pragma Enable_Atomic_Synchronization,  Up: Implementation Defined Pragmas

2.54 Pragma Export_Function
===========================

Syntax:

    pragma Export_Function (
         [Internal         =>] LOCAL_NAME
      [, [External         =>] EXTERNAL_SYMBOL]
      [, [Parameter_Types  =>] PARAMETER_TYPES]
      [, [Result_Type      =>] result_SUBTYPE_MARK]
      [, [Mechanism        =>] MECHANISM]
      [, [Result_Mechanism =>] MECHANISM_NAME]);

    EXTERNAL_SYMBOL ::=
      IDENTIFIER
    | static_string_EXPRESSION
    | ""

    PARAMETER_TYPES ::=
      null
    | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

    TYPE_DESIGNATOR ::=
      subtype_NAME
    | subtype_Name ' Access

    MECHANISM ::=
      MECHANISM_NAME
    | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

    MECHANISM_ASSOCIATION ::=
      [formal_parameter_NAME =>] MECHANISM_NAME

    MECHANISM_NAME ::= Value | Reference

Use this pragma to make a function externally callable and optionally
provide information on mechanisms to be used for passing parameter and
result values.  We recommend, for the purposes of improving portability,
this pragma always be used in conjunction with a separate pragma
`Export', which must precede the pragma `Export_Function'.  GNAT does
not require a separate pragma `Export', but if none is present,
`Convention Ada' is assumed, which is usually not what is wanted, so it
is usually appropriate to use this pragma in conjunction with a
`Export' or `Convention' pragma that specifies the desired foreign
convention.  Pragma `Export_Function' (and `Export', if present) must
appear in the same declarative region as the function to which they
apply.

`internal_name' must uniquely designate the function to which the
pragma applies.  If more than one function name exists of this name in
the declarative part you must use the `Parameter_Types' and
`Result_Type' parameters is mandatory to achieve the required unique
designation.  `subtype_mark`s in these parameters must exactly match
the subtypes in the corresponding function specification, using
positional notation to match parameters with subtype marks. The form
with an `'Access' attribute can be used to match an anonymous access
parameter.

Special treatment is given if the EXTERNAL is an explicit null string
or a static string expressions that evaluates to the null string. In
this case, no external name is generated. This form still allows the
specification of parameter mechanisms.


File: gnat_rm.info,  Node: Pragma Export_Object,  Next: Pragma Export_Procedure,  Prev: Pragma Export_Function,  Up: Implementation Defined Pragmas

2.55 Pragma Export_Object
=========================

Syntax:

    pragma Export_Object
          [Internal =>] LOCAL_NAME
       [, [External =>] EXTERNAL_SYMBOL]
       [, [Size     =>] EXTERNAL_SYMBOL]

    EXTERNAL_SYMBOL ::=
      IDENTIFIER
    | static_string_EXPRESSION

This pragma designates an object as exported, and apart from the
extended rules for external symbols, is identical in effect to the use
of the normal `Export' pragma applied to an object.  You may use a
separate Export pragma (and you probably should from the point of view
of portability), but it is not required.  `Size' is syntax checked, but
otherwise ignored by GNAT.


File: gnat_rm.info,  Node: Pragma Export_Procedure,  Next: Pragma Export_Value,  Prev: Pragma Export_Object,  Up: Implementation Defined Pragmas

2.56 Pragma Export_Procedure
============================

Syntax:

    pragma Export_Procedure (
         [Internal        =>] LOCAL_NAME
      [, [External        =>] EXTERNAL_SYMBOL]
      [, [Parameter_Types =>] PARAMETER_TYPES]
      [, [Mechanism       =>] MECHANISM]);

    EXTERNAL_SYMBOL ::=
      IDENTIFIER
    | static_string_EXPRESSION
    | ""

    PARAMETER_TYPES ::=
      null
    | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

    TYPE_DESIGNATOR ::=
      subtype_NAME
    | subtype_Name ' Access

    MECHANISM ::=
      MECHANISM_NAME
    | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

    MECHANISM_ASSOCIATION ::=
      [formal_parameter_NAME =>] MECHANISM_NAME

    MECHANISM_NAME ::= Value | Reference

This pragma is identical to `Export_Function' except that it applies to
a procedure rather than a function and the parameters `Result_Type' and
`Result_Mechanism' are not permitted.  GNAT does not require a separate
pragma `Export', but if none is present, `Convention Ada' is assumed,
which is usually not what is wanted, so it is usually appropriate to
use this pragma in conjunction with a `Export' or `Convention' pragma
that specifies the desired foreign convention.

Special treatment is given if the EXTERNAL is an explicit null string
or a static string expressions that evaluates to the null string. In
this case, no external name is generated. This form still allows the
specification of parameter mechanisms.


File: gnat_rm.info,  Node: Pragma Export_Value,  Next: Pragma Export_Valued_Procedure,  Prev: Pragma Export_Procedure,  Up: Implementation Defined Pragmas

2.57 Pragma Export_Value
========================

Syntax:

    pragma Export_Value (
      [Value     =>] static_integer_EXPRESSION,
      [Link_Name =>] static_string_EXPRESSION);

This pragma serves to export a static integer value for external use.
The first argument specifies the value to be exported. The Link_Name
argument specifies the symbolic name to be associated with the integer
value. This pragma is useful for defining a named static value in Ada
that can be referenced in assembly language units to be linked with the
application. This pragma is currently supported only for the AAMP
target and is ignored for other targets.


File: gnat_rm.info,  Node: Pragma Export_Valued_Procedure,  Next: Pragma Extend_System,  Prev: Pragma Export_Value,  Up: Implementation Defined Pragmas

2.58 Pragma Export_Valued_Procedure
===================================

Syntax:

    pragma Export_Valued_Procedure (
         [Internal        =>] LOCAL_NAME
      [, [External        =>] EXTERNAL_SYMBOL]
      [, [Parameter_Types =>] PARAMETER_TYPES]
      [, [Mechanism       =>] MECHANISM]);

    EXTERNAL_SYMBOL ::=
      IDENTIFIER
    | static_string_EXPRESSION
    | ""

    PARAMETER_TYPES ::=
      null
    | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

    TYPE_DESIGNATOR ::=
      subtype_NAME
    | subtype_Name ' Access

    MECHANISM ::=
      MECHANISM_NAME
    | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

    MECHANISM_ASSOCIATION ::=
      [formal_parameter_NAME =>] MECHANISM_NAME

    MECHANISM_NAME ::= Value | Reference

This pragma is identical to `Export_Procedure' except that the first
parameter of `LOCAL_NAME', which must be present, must be of mode
`OUT', and externally the subprogram is treated as a function with this
parameter as the result of the function.  GNAT provides for this
capability to allow the use of `OUT' and `IN OUT' parameters in
interfacing to external functions (which are not permitted in Ada
functions).  GNAT does not require a separate pragma `Export', but if
none is present, `Convention Ada' is assumed, which is almost certainly
not what is wanted since the whole point of this pragma is to interface
with foreign language functions, so it is usually appropriate to use
this pragma in conjunction with a `Export' or `Convention' pragma that
specifies the desired foreign convention.

Special treatment is given if the EXTERNAL is an explicit null string
or a static string expressions that evaluates to the null string. In
this case, no external name is generated. This form still allows the
specification of parameter mechanisms.


File: gnat_rm.info,  Node: Pragma Extend_System,  Next: Pragma Extensions_Allowed,  Prev: Pragma Export_Valued_Procedure,  Up: Implementation Defined Pragmas

2.59 Pragma Extend_System
=========================

Syntax:

    pragma Extend_System ([Name =>] IDENTIFIER);

This pragma is used to provide backwards compatibility with other
implementations that extend the facilities of package `System'.  In
GNAT, `System' contains only the definitions that are present in the
Ada RM.  However, other implementations, notably the DEC Ada 83
implementation, provide many extensions to package `System'.

For each such implementation accommodated by this pragma, GNAT provides
a package `Aux_`xxx`', e.g., `Aux_DEC' for the DEC Ada 83
implementation, which provides the required additional definitions.  You
can use this package in two ways.  You can `with' it in the normal way
and access entities either by selection or using a `use' clause.  In
this case no special processing is required.

However, if existing code contains references such as `System.`xxx`'
where `xxx' is an entity in the extended definitions provided in
package `System', you may use this pragma to extend visibility in
`System' in a non-standard way that provides greater compatibility with
the existing code.  Pragma `Extend_System' is a configuration pragma
whose single argument is the name of the package containing the
extended definition (e.g., `Aux_DEC' for the DEC Ada case).  A unit
compiled under control of this pragma will be processed using special
visibility processing that looks in package `System.Aux_`xxx`' where
`Aux_`xxx`' is the pragma argument for any entity referenced in package
`System', but not found in package `System'.

You can use this pragma either to access a predefined `System'
extension supplied with the compiler, for example `Aux_DEC' or you can
construct your own extension unit following the above definition.  Note
that such a package is a child of `System' and thus is considered part
of the implementation.  To compile it you will have to use the `-gnatg'
switch for compiling System units, as explained in the GNAT User's
Guide.


File: gnat_rm.info,  Node: Pragma Extensions_Allowed,  Next: Pragma External,  Prev: Pragma Extend_System,  Up: Implementation Defined Pragmas

2.60 Pragma Extensions_Allowed
==============================

Syntax:

    pragma Extensions_Allowed (On | Off);

This configuration pragma enables or disables the implementation
extension mode (the use of Off as a parameter cancels the effect of the
`-gnatX' command switch).

In extension mode, the latest version of the Ada language is
implemented (currently Ada 2012), and in addition a small number of
GNAT specific extensions are recognized as follows:

`Constrained attribute for generic objects'
     The `Constrained' attribute is permitted for objects of generic
     types. The result indicates if the corresponding actual is
     constrained.


File: gnat_rm.info,  Node: Pragma External,  Next: Pragma External_Name_Casing,  Prev: Pragma Extensions_Allowed,  Up: Implementation Defined Pragmas

2.61 Pragma External
====================

Syntax:

    pragma External (
      [   Convention    =>] convention_IDENTIFIER,
      [   Entity        =>] LOCAL_NAME
      [, [External_Name =>] static_string_EXPRESSION ]
      [, [Link_Name     =>] static_string_EXPRESSION ]);

This pragma is identical in syntax and semantics to pragma `Export' as
defined in the Ada Reference Manual.  It is provided for compatibility
with some Ada 83 compilers that used this pragma for exactly the same
purposes as pragma `Export' before the latter was standardized.


File: gnat_rm.info,  Node: Pragma External_Name_Casing,  Next: Pragma Fast_Math,  Prev: Pragma External,  Up: Implementation Defined Pragmas

2.62 Pragma External_Name_Casing
================================

Syntax:

    pragma External_Name_Casing (
      Uppercase | Lowercase
      [, Uppercase | Lowercase | As_Is]);

This pragma provides control over the casing of external names
associated with Import and Export pragmas.  There are two cases to
consider:

   * Implicit external names

     Implicit external names are derived from identifiers.  The most
     common case arises when a standard Ada Import or Export pragma is
     used with only two arguments, as in:

         pragma Import (C, C_Routine);

     Since Ada is a case-insensitive language, the spelling of the
     identifier in the Ada source program does not provide any
     information on the desired casing of the external name, and so a
     convention is needed.  In GNAT the default treatment is that such
     names are converted to all lower case letters.  This corresponds
     to the normal C style in many environments.  The first argument of
     pragma `External_Name_Casing' can be used to control this
     treatment.  If `Uppercase' is specified, then the name will be
     forced to all uppercase letters.  If `Lowercase' is specified,
     then the normal default of all lower case letters will be used.

     This same implicit treatment is also used in the case of extended
     DEC Ada 83 compatible Import and Export pragmas where an external
     name is explicitly specified using an identifier rather than a
     string.

   * Explicit external names

     Explicit external names are given as string literals.  The most
     common case arises when a standard Ada Import or Export pragma is
     used with three arguments, as in:

         pragma Import (C, C_Routine, "C_routine");

     In this case, the string literal normally provides the exact
     casing required for the external name.  The second argument of
     pragma `External_Name_Casing' may be used to modify this behavior.
     If `Uppercase' is specified, then the name will be forced to all
     uppercase letters.  If `Lowercase' is specified, then the name
     will be forced to all lowercase letters.  A specification of
     `As_Is' provides the normal default behavior in which the casing is
     taken from the string provided.

This pragma may appear anywhere that a pragma is valid.  In particular,
it can be used as a configuration pragma in the `gnat.adc' file, in
which case it applies to all subsequent compilations, or it can be used
as a program unit pragma, in which case it only applies to the current
unit, or it can be used more locally to control individual
Import/Export pragmas.

It was primarily intended for use with OpenVMS systems, where many
compilers convert all symbols to upper case by default.  For
interfacing to such compilers (e.g., the DEC C compiler), it may be
convenient to use the pragma:

    pragma External_Name_Casing (Uppercase, Uppercase);

to enforce the upper casing of all external symbols.


File: gnat_rm.info,  Node: Pragma Fast_Math,  Next: Pragma Favor_Top_Level,  Prev: Pragma External_Name_Casing,  Up: Implementation Defined Pragmas

2.63 Pragma Fast_Math
=====================

Syntax:

    pragma Fast_Math;

This is a configuration pragma which activates a mode in which speed is
considered more important for floating-point operations than absolutely
accurate adherence to the requirements of the standard. Currently the
following operations are affected:

`Complex Multiplication'
     The normal simple formula for complex multiplication can result in
     intermediate overflows for numbers near the end of the range. The
     Ada standard requires that this situation be detected and
     corrected by scaling, but in Fast_Math mode such cases will simply
     result in overflow. Note that to take advantage of this you must
     instantiate your own version of
     `Ada.Numerics.Generic_Complex_Types' under control of the pragma,
     rather than use the preinstantiated versions.


File: gnat_rm.info,  Node: Pragma Favor_Top_Level,  Next: Pragma Finalize_Storage_Only,  Prev: Pragma Fast_Math,  Up: Implementation Defined Pragmas

2.64 Pragma Favor_Top_Level
===========================

Syntax:

    pragma Favor_Top_Level (type_NAME);

The named type must be an access-to-subprogram type. This pragma is an
efficiency hint to the compiler, regarding the use of 'Access or
'Unrestricted_Access on nested (non-library-level) subprograms. The
pragma means that nested subprograms are not used with this type, or
are rare, so that the generated code should be efficient in the
top-level case. When this pragma is used, dynamically generated
trampolines may be used on some targets for nested subprograms.  See
also the No_Implicit_Dynamic_Code restriction.


File: gnat_rm.info,  Node: Pragma Finalize_Storage_Only,  Next: Pragma Float_Representation,  Prev: Pragma Favor_Top_Level,  Up: Implementation Defined Pragmas

2.65 Pragma Finalize_Storage_Only
=================================

Syntax:

    pragma Finalize_Storage_Only (first_subtype_LOCAL_NAME);

This pragma allows the compiler not to emit a Finalize call for objects
defined at the library level.  This is mostly useful for types where
finalization is only used to deal with storage reclamation since in most
environments it is not necessary to reclaim memory just before
terminating execution, hence the name.


File: gnat_rm.info,  Node: Pragma Float_Representation,  Next: Pragma Global,  Prev: Pragma Finalize_Storage_Only,  Up: Implementation Defined Pragmas

2.66 Pragma Float_Representation
================================

Syntax:

    pragma Float_Representation (FLOAT_REP[, float_type_LOCAL_NAME]);

    FLOAT_REP ::= VAX_Float | IEEE_Float

In the one argument form, this pragma is a configuration pragma which
allows control over the internal representation chosen for the
predefined floating point types declared in the packages `Standard' and
`System'. This pragma is only provided for compatibility and has no
effect.

The two argument form specifies the representation to be used for the
specified floating-point type. The argument must be `IEEE_Float' to
specify the use of IEEE format, as follows:

   * For a digits value of 6, 32-bit IEEE short format will be used.

   * For a digits value of 15, 64-bit IEEE long format will be used.

   * No other value of digits is permitted.


File: gnat_rm.info,  Node: Pragma Global,  Next: Pragma Ident,  Prev: Pragma Float_Representation,  Up: Implementation Defined Pragmas

2.67 Pragma Global
==================

For the description of this pragma, see SPARK 2014 Reference Manual,
section 6.1.4.


File: gnat_rm.info,  Node: Pragma Ident,  Next: Pragma Ignore_Pragma,  Prev: Pragma Global,  Up: Implementation Defined Pragmas

2.68 Pragma Ident
=================

Syntax:

    pragma Ident (static_string_EXPRESSION);

This pragma is identical in effect to pragma `Comment'. It is provided
for compatibility with other Ada compilers providing this pragma.


File: gnat_rm.info,  Node: Pragma Ignore_Pragma,  Next: Pragma Implementation_Defined,  Prev: Pragma Ident,  Up: Implementation Defined Pragmas

2.69 Pragma Ignore_Pragma
=========================

Syntax:

    pragma Ignore_Pragma (pragma_IDENTIFIER);

This is a configuration pragma that takes a single argument that is a
simple identifier. Any subsequent use of a pragma whose pragma
identifier matches this argument will be silently ignored. This may be
useful when legacy code or code intended for compilation with some
other compiler contains pragmas that match the name, but not the exact
implementation, of a `GNAT' pragma. The use of this pragma allows such
pragmas to be ignored, which may be useful in `CodePeer' mode, or
during porting of legacy code.


File: gnat_rm.info,  Node: Pragma Implementation_Defined,  Next: Pragma Implemented,  Prev: Pragma Ignore_Pragma,  Up: Implementation Defined Pragmas

2.70 Pragma Implementation_Defined
==================================

Syntax:

    pragma Implementation_Defined (local_NAME);

This pragma marks a previously declared entioty as
implementation-defined.  For an overloaded entity, applies to the most
recent homonym.

    pragma Implementation_Defined;

The form with no arguments appears anywhere within a scope, most
typically a package spec, and indicates that all entities that are
defined within the package spec are Implementation_Defined.

This pragma is used within the GNAT runtime library to identify
implementation-defined entities introduced in language-defined units,
for the purpose of implementing the No_Implementation_Identifiers
restriction.


File: gnat_rm.info,  Node: Pragma Implemented,  Next: Pragma Implicit_Packing,  Prev: Pragma Implementation_Defined,  Up: Implementation Defined Pragmas

2.71 Pragma Implemented
=======================

Syntax:

    pragma Implemented (procedure_LOCAL_NAME, implementation_kind);

    implementation_kind ::= By_Entry | By_Protected_Procedure | By_Any

This is an Ada 2012 representation pragma which applies to protected,
task and synchronized interface primitives. The use of pragma
Implemented provides a way to impose a static requirement on the
overriding operation by adhering to one of the three implementation
kinds: entry, protected procedure or any of the above. This pragma is
available in all earlier versions of Ada as an implementation-defined
pragma.

    type Synch_Iface is synchronized interface;
    procedure Prim_Op (Obj : in out Iface) is abstract;
    pragma Implemented (Prim_Op, By_Protected_Procedure);

    protected type Prot_1 is new Synch_Iface with
       procedure Prim_Op;  --  Legal
    end Prot_1;

    protected type Prot_2 is new Synch_Iface with
       entry Prim_Op;      --  Illegal
    end Prot_2;

    task type Task_Typ is new Synch_Iface with
       entry Prim_Op;      --  Illegal
    end Task_Typ;

When applied to the procedure_or_entry_NAME of a requeue statement,
pragma Implemented determines the runtime behavior of the requeue.
Implementation kind By_Entry guarantees that the action of requeueing
will proceed from an entry to another entry. Implementation kind
By_Protected_Procedure transforms the requeue into a dispatching call,
thus eliminating the chance of blocking. Kind By_Any shares the
behavior of By_Entry and By_Protected_Procedure depending on the
target's overriding subprogram kind.


File: gnat_rm.info,  Node: Pragma Implicit_Packing,  Next: Pragma Import_Function,  Prev: Pragma Implemented,  Up: Implementation Defined Pragmas

2.72 Pragma Implicit_Packing
============================

Syntax:

    pragma Implicit_Packing;

This is a configuration pragma that requests implicit packing for packed
arrays for which a size clause is given but no explicit pragma Pack or
specification of Component_Size is present. It also applies to records
where no record representation clause is present. Consider this example:

    type R is array (0 .. 7) of Boolean;
    for R'Size use 8;

In accordance with the recommendation in the RM (RM 13.3(53)), a Size
clause does not change the layout of a composite object. So the Size
clause in the above example is normally rejected, since the default
layout of the array uses 8-bit components, and thus the array requires
a minimum of 64 bits.

If this declaration is compiled in a region of code covered by an
occurrence of the configuration pragma Implicit_Packing, then the Size
clause in this and similar examples will cause implicit packing and
thus be accepted. For this implicit packing to occur, the type in
question must be an array of small components whose size is known at
compile time, and the Size clause must specify the exact size that
corresponds to the number of elements in the array multiplied by the
size in bits of the component type (both single and multi-dimensioned
arrays can be controlled with this pragma).

Similarly, the following example shows the use in the record case

    type r is record
       a, b, c, d, e, f, g, h : boolean;
       chr                    : character;
    end record;
    for r'size use 16;

Without a pragma Pack, each Boolean field requires 8 bits, so the
minimum size is 72 bits, but with a pragma Pack, 16 bits would be
sufficient. The use of pragma Implicit_Packing allows this record
declaration to compile without an explicit pragma Pack.


File: gnat_rm.info,  Node: Pragma Import_Function,  Next: Pragma Import_Object,  Prev: Pragma Implicit_Packing,  Up: Implementation Defined Pragmas

2.73 Pragma Import_Function
===========================

Syntax:

    pragma Import_Function (
         [Internal                 =>] LOCAL_NAME,
      [, [External                 =>] EXTERNAL_SYMBOL]
      [, [Parameter_Types          =>] PARAMETER_TYPES]
      [, [Result_Type              =>] SUBTYPE_MARK]
      [, [Mechanism                =>] MECHANISM]
      [, [Result_Mechanism         =>] MECHANISM_NAME]);

    EXTERNAL_SYMBOL ::=
      IDENTIFIER
    | static_string_EXPRESSION

    PARAMETER_TYPES ::=
      null
    | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

    TYPE_DESIGNATOR ::=
      subtype_NAME
    | subtype_Name ' Access

    MECHANISM ::=
      MECHANISM_NAME
    | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

    MECHANISM_ASSOCIATION ::=
      [formal_parameter_NAME =>] MECHANISM_NAME

    MECHANISM_NAME ::=
      Value
    | Reference

This pragma is used in conjunction with a pragma `Import' to specify
additional information for an imported function.  The pragma `Import'
(or equivalent pragma `Interface') must precede the `Import_Function'
pragma and both must appear in the same declarative part as the
function specification.

The `Internal' argument must uniquely designate the function to which
the pragma applies.  If more than one function name exists of this name
in the declarative part you must use the `Parameter_Types' and
`Result_Type' parameters to achieve the required unique designation.
Subtype marks in these parameters must exactly match the subtypes in
the corresponding function specification, using positional notation to
match parameters with subtype marks.  The form with an `'Access'
attribute can be used to match an anonymous access parameter.

You may optionally use the `Mechanism' and `Result_Mechanism'
parameters to specify passing mechanisms for the parameters and result.
If you specify a single mechanism name, it applies to all parameters.
Otherwise you may specify a mechanism on a parameter by parameter basis
using either positional or named notation.  If the mechanism is not
specified, the default mechanism is used.


File: gnat_rm.info,  Node: Pragma Import_Object,  Next: Pragma Import_Procedure,  Prev: Pragma Import_Function,  Up: Implementation Defined Pragmas

2.74 Pragma Import_Object
=========================

Syntax:

    pragma Import_Object
         [Internal =>] LOCAL_NAME
      [, [External =>] EXTERNAL_SYMBOL]
      [, [Size     =>] EXTERNAL_SYMBOL]);

    EXTERNAL_SYMBOL ::=
      IDENTIFIER
    | static_string_EXPRESSION

This pragma designates an object as imported, and apart from the
extended rules for external symbols, is identical in effect to the use
of the normal `Import' pragma applied to an object.  Unlike the
subprogram case, you need not use a separate `Import' pragma, although
you may do so (and probably should do so from a portability point of
view).  `size' is syntax checked, but otherwise ignored by GNAT.


File: gnat_rm.info,  Node: Pragma Import_Procedure,  Next: Pragma Import_Valued_Procedure,  Prev: Pragma Import_Object,  Up: Implementation Defined Pragmas

2.75 Pragma Import_Procedure
============================

Syntax:

    pragma Import_Procedure (
         [Internal                 =>] LOCAL_NAME
      [, [External                 =>] EXTERNAL_SYMBOL]
      [, [Parameter_Types          =>] PARAMETER_TYPES]
      [, [Mechanism                =>] MECHANISM]);

    EXTERNAL_SYMBOL ::=
      IDENTIFIER
    | static_string_EXPRESSION

    PARAMETER_TYPES ::=
      null
    | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

    TYPE_DESIGNATOR ::=
      subtype_NAME
    | subtype_Name ' Access

    MECHANISM ::=
      MECHANISM_NAME
    | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

    MECHANISM_ASSOCIATION ::=
      [formal_parameter_NAME =>] MECHANISM_NAME

    MECHANISM_NAME ::= Value | Reference

This pragma is identical to `Import_Function' except that it applies to
a procedure rather than a function and the parameters `Result_Type' and
`Result_Mechanism' are not permitted.


File: gnat_rm.info,  Node: Pragma Import_Valued_Procedure,  Next: Pragma Independent,  Prev: Pragma Import_Procedure,  Up: Implementation Defined Pragmas

2.76 Pragma Import_Valued_Procedure
===================================

Syntax:

    pragma Import_Valued_Procedure (
         [Internal                 =>] LOCAL_NAME
      [, [External                 =>] EXTERNAL_SYMBOL]
      [, [Parameter_Types          =>] PARAMETER_TYPES]
      [, [Mechanism                =>] MECHANISM]);

    EXTERNAL_SYMBOL ::=
      IDENTIFIER
    | static_string_EXPRESSION

    PARAMETER_TYPES ::=
      null
    | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

    TYPE_DESIGNATOR ::=
      subtype_NAME
    | subtype_Name ' Access

    MECHANISM ::=
      MECHANISM_NAME
    | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

    MECHANISM_ASSOCIATION ::=
      [formal_parameter_NAME =>] MECHANISM_NAME

    MECHANISM_NAME ::= Value | Reference

This pragma is identical to `Import_Procedure' except that the first
parameter of `LOCAL_NAME', which must be present, must be of mode
`OUT', and externally the subprogram is treated as a function with this
parameter as the result of the function.  The purpose of this
capability is to allow the use of `OUT' and `IN OUT' parameters in
interfacing to external functions (which are not permitted in Ada
functions).  You may optionally use the `Mechanism' parameters to
specify passing mechanisms for the parameters.  If you specify a single
mechanism name, it applies to all parameters.  Otherwise you may
specify a mechanism on a parameter by parameter basis using either
positional or named notation.  If the mechanism is not specified, the
default mechanism is used.

Note that it is important to use this pragma in conjunction with a
separate pragma Import that specifies the desired convention, since
otherwise the default convention is Ada, which is almost certainly not
what is required.


File: gnat_rm.info,  Node: Pragma Independent,  Next: Pragma Independent_Components,  Prev: Pragma Import_Valued_Procedure,  Up: Implementation Defined Pragmas

2.77 Pragma Independent
=======================

Syntax:

    pragma Independent (Local_NAME);

This pragma is standard in Ada 2012 mode (which also provides an aspect
of the same name). It is also available as an implementation-defined
pragma in all earlier versions. It specifies that the designated object
or all objects of the designated type must be independently
addressable. This means that separate tasks can safely manipulate such
objects. For example, if two components of a record are independent,
then two separate tasks may access these two components.  This may place
constraints on the representation of the object (for instance
prohibiting tight packing).


File: gnat_rm.info,  Node: Pragma Independent_Components,  Next: Pragma Initial_Condition,  Prev: Pragma Independent,  Up: Implementation Defined Pragmas

2.78 Pragma Independent_Components
==================================

Syntax:

    pragma Independent_Components (Local_NAME);

This pragma is standard in Ada 2012 mode (which also provides an aspect
of the same name). It is also available as an implementation-defined
pragma in all earlier versions. It specifies that the components of the
designated object, or the components of each object of the designated
type, must be independently addressable. This means that separate tasks
can safely manipulate separate components in the composite object. This
may place constraints on the representation of the object (for instance
prohibiting tight packing).


File: gnat_rm.info,  Node: Pragma Initial_Condition,  Next: Pragma Initialize_Scalars,  Prev: Pragma Independent_Components,  Up: Implementation Defined Pragmas

2.79 Pragma Initial_Condition
=============================

For the description of this pragma, see SPARK 2014 Reference Manual,
section 7.1.6.


File: gnat_rm.info,  Node: Pragma Initialize_Scalars,  Next: Pragma Initializes,  Prev: Pragma Initial_Condition,  Up: Implementation Defined Pragmas

2.80 Pragma Initialize_Scalars
==============================

Syntax:

    pragma Initialize_Scalars;

This pragma is similar to `Normalize_Scalars' conceptually but has two
important differences.  First, there is no requirement for the pragma
to be used uniformly in all units of a partition, in particular, it is
fine to use this just for some or all of the application units of a
partition, without needing to recompile the run-time library.

In the case where some units are compiled with the pragma, and some
without, then a declaration of a variable where the type is defined in
package Standard or is locally declared will always be subject to
initialization, as will any declaration of a scalar variable.  For
composite variables, whether the variable is initialized may also
depend on whether the package in which the type of the variable is
declared is compiled with the pragma.

The other important difference is that you can control the value used
for initializing scalar objects.  At bind time, you can select several
options for initialization. You can initialize with invalid values
(similar to Normalize_Scalars, though for Initialize_Scalars it is not
always possible to determine the invalid values in complex cases like
signed component fields with non-standard sizes). You can also
initialize with high or low values, or with a specified bit pattern.
See the GNAT User's Guide for binder options for specifying these cases.

This means that you can compile a program, and then without having to
recompile the program, you can run it with different values being used
for initializing otherwise uninitialized values, to test if your program
behavior depends on the choice.  Of course the behavior should not
change, and if it does, then most likely you have an incorrect
reference to an uninitialized value.

It is even possible to change the value at execution time eliminating
even the need to rebind with a different switch using an environment
variable.  See the GNAT User's Guide for details.

Note that pragma `Initialize_Scalars' is particularly useful in
conjunction with the enhanced validity checking that is now provided in
GNAT, which checks for invalid values under more conditions.  Using
this feature (see description of the `-gnatV' flag in the GNAT User's
Guide) in conjunction with pragma `Initialize_Scalars' provides a
powerful new tool to assist in the detection of problems caused by
uninitialized variables.

Note: the use of `Initialize_Scalars' has a fairly extensive effect on
the generated code. This may cause your code to be substantially
larger. It may also cause an increase in the amount of stack required,
so it is probably a good idea to turn on stack checking (see
description of stack checking in the GNAT User's Guide) when using this
pragma.


File: gnat_rm.info,  Node: Pragma Initializes,  Next: Pragma Inline_Always,  Prev: Pragma Initialize_Scalars,  Up: Implementation Defined Pragmas

2.81 Pragma Initializes
=======================

For the description of this pragma, see SPARK 2014 Reference Manual,
section 7.1.5.


File: gnat_rm.info,  Node: Pragma Inline_Always,  Next: Pragma Inline_Generic,  Prev: Pragma Initializes,  Up: Implementation Defined Pragmas

2.82 Pragma Inline_Always
=========================

Syntax:

    pragma Inline_Always (NAME [, NAME]);

Similar to pragma `Inline' except that inlining is not subject to the
use of option `-gnatn' or `-gnatN' and the inlining happens regardless
of whether these options are used.


File: gnat_rm.info,  Node: Pragma Inline_Generic,  Next: Pragma Interface,  Prev: Pragma Inline_Always,  Up: Implementation Defined Pragmas

2.83 Pragma Inline_Generic
==========================

Syntax:

    pragma Inline_Generic (GNAME {, GNAME});

    GNAME ::= generic_unit_NAME | generic_instance_NAME

This pragma is provided for compatibility with Dec Ada 83. It has no
effect in `GNAT' (which always inlines generics), other than to check
that the given names are all names of generic units or generic
instances.


File: gnat_rm.info,  Node: Pragma Interface,  Next: Pragma Interface_Name,  Prev: Pragma Inline_Generic,  Up: Implementation Defined Pragmas

2.84 Pragma Interface
=====================

Syntax:

    pragma Interface (
         [Convention    =>] convention_identifier,
         [Entity        =>] local_NAME
      [, [External_Name =>] static_string_expression]
      [, [Link_Name     =>] static_string_expression]);

This pragma is identical in syntax and semantics to the standard Ada
pragma `Import'.  It is provided for compatibility with Ada 83.  The
definition is upwards compatible both with pragma `Interface' as
defined in the Ada 83 Reference Manual, and also with some extended
implementations of this pragma in certain Ada 83 implementations.  The
only difference between pragma `Interface' and pragma `Import' is that
there is special circuitry to allow both pragmas to appear for the same
subprogram entity (normally it is illegal to have multiple `Import'
pragmas. This is useful in maintaining Ada 83/Ada 95 compatibility and
is compatible with other Ada 83 compilers.


File: gnat_rm.info,  Node: Pragma Interface_Name,  Next: Pragma Interrupt_Handler,  Prev: Pragma Interface,  Up: Implementation Defined Pragmas

2.85 Pragma Interface_Name
==========================

Syntax:

    pragma Interface_Name (
         [Entity        =>] LOCAL_NAME
      [, [External_Name =>] static_string_EXPRESSION]
      [, [Link_Name     =>] static_string_EXPRESSION]);

This pragma provides an alternative way of specifying the interface name
for an interfaced subprogram, and is provided for compatibility with Ada
83 compilers that use the pragma for this purpose.  You must provide at
least one of `External_Name' or `Link_Name'.


File: gnat_rm.info,  Node: Pragma Interrupt_Handler,  Next: Pragma Interrupt_State,  Prev: Pragma Interface_Name,  Up: Implementation Defined Pragmas

2.86 Pragma Interrupt_Handler
=============================

Syntax:

    pragma Interrupt_Handler (procedure_LOCAL_NAME);

This program unit pragma is supported for parameterless protected
procedures as described in Annex C of the Ada Reference Manual. On the
AAMP target the pragma can also be specified for nonprotected
parameterless procedures that are declared at the library level (which
includes procedures declared at the top level of a library package). In
the case of AAMP, when this pragma is applied to a nonprotected
procedure, the instruction `IERET' is generated for returns from the
procedure, enabling maskable interrupts, in place of the normal return
instruction.


File: gnat_rm.info,  Node: Pragma Interrupt_State,  Next: Pragma Invariant,  Prev: Pragma Interrupt_Handler,  Up: Implementation Defined Pragmas

2.87 Pragma Interrupt_State
===========================

Syntax:

    pragma Interrupt_State
     ([Name  =>] value,
      [State =>] SYSTEM | RUNTIME | USER);

Normally certain interrupts are reserved to the implementation.  Any
attempt to attach an interrupt causes Program_Error to be raised, as
described in RM C.3.2(22).  A typical example is the `SIGINT' interrupt
used in many systems for an `Ctrl-C' interrupt.  Normally this
interrupt is reserved to the implementation, so that `Ctrl-C' can be
used to interrupt execution.  Additionally, signals such as `SIGSEGV',
`SIGABRT', `SIGFPE' and `SIGILL' are often mapped to specific Ada
exceptions, or used to implement run-time functions such as the `abort'
statement and stack overflow checking.

Pragma `Interrupt_State' provides a general mechanism for overriding
such uses of interrupts.  It subsumes the functionality of pragma
`Unreserve_All_Interrupts'.  Pragma `Interrupt_State' is not available
on Windows or VMS.  On all other platforms than VxWorks, it applies to
signals; on VxWorks, it applies to vectored hardware interrupts and may
be used to mark interrupts required by the board support package as
reserved.

Interrupts can be in one of three states:

   * System

     The interrupt is reserved (no Ada handler can be installed), and
     the Ada run-time may not install a handler. As a result you are
     guaranteed standard system default action if this interrupt is
     raised.

   * Runtime

     The interrupt is reserved (no Ada handler can be installed). The
     run time is allowed to install a handler for internal control
     purposes, but is not required to do so.

   * User

     The interrupt is unreserved.  The user may install a handler to
     provide some other action.

These states are the allowed values of the `State' parameter of the
pragma.  The `Name' parameter is a value of the type
`Ada.Interrupts.Interrupt_ID'.  Typically, it is a name declared in
`Ada.Interrupts.Names'.

This is a configuration pragma, and the binder will check that there
are no inconsistencies between different units in a partition in how a
given interrupt is specified. It may appear anywhere a pragma is legal.

The effect is to move the interrupt to the specified state.

By declaring interrupts to be SYSTEM, you guarantee the standard system
action, such as a core dump.

By declaring interrupts to be USER, you guarantee that you can install
a handler.

Note that certain signals on many operating systems cannot be caught and
handled by applications.  In such cases, the pragma is ignored.  See the
operating system documentation, or the value of the array `Reserved'
declared in the spec of package `System.OS_Interface'.

Overriding the default state of signals used by the Ada runtime may
interfere with an application's runtime behavior in the cases of the
synchronous signals, and in the case of the signal used to implement
the `abort' statement.


File: gnat_rm.info,  Node: Pragma Invariant,  Next: Pragma Java_Constructor,  Prev: Pragma Interrupt_State,  Up: Implementation Defined Pragmas

2.88 Pragma Invariant
=====================

Syntax:

    pragma Invariant
      ([Entity =>]    private_type_LOCAL_NAME,
       [Check  =>]    EXPRESSION
       [,[Message =>] String_Expression]);

This pragma provides exactly the same capabilities as the
Type_Invariant aspect defined in AI05-0146-1, and in the Ada 2012
Reference Manual. The Type_Invariant aspect is fully implemented in Ada
2012 mode, but since it requires the use of the aspect syntax, which is
not available except in 2012 mode, it is not possible to use the
Type_Invariant aspect in earlier versions of Ada. However the Invariant
pragma may be used in any version of Ada. Also note that the aspect
Invariant is a synonym in GNAT for the aspect Type_Invariant, but there
is no pragma Type_Invariant.

The pragma must appear within the visible part of the package
specification, after the type to which its Entity argument appears. As
with the Invariant aspect, the Check expression is not analyzed until
the end of the visible part of the package, so it may contain forward
references. The Message argument, if present, provides the exception
message used if the invariant is violated. If no Message parameter is
provided, a default message that identifies the line on which the
pragma appears is used.

It is permissible to have multiple Invariants for the same type entity,
in which case they are and'ed together. It is permissible to use this
pragma in Ada 2012 mode, but you cannot have both an invariant aspect
and an invariant pragma for the same entity.

For further details on the use of this pragma, see the Ada 2012
documentation of the Type_Invariant aspect.


File: gnat_rm.info,  Node: Pragma Java_Constructor,  Next: Pragma Java_Interface,  Prev: Pragma Invariant,  Up: Implementation Defined Pragmas

2.89 Pragma Java_Constructor
============================

Syntax:

    pragma Java_Constructor ([Entity =>] function_LOCAL_NAME);

This pragma is used to assert that the specified Ada function should be
mapped to the Java constructor for some Ada tagged record type.

See section 7.3.2 of the `GNAT User's Guide: Supplement for the JVM
Platform.'  for related information.


File: gnat_rm.info,  Node: Pragma Java_Interface,  Next: Pragma Keep_Names,  Prev: Pragma Java_Constructor,  Up: Implementation Defined Pragmas

2.90 Pragma Java_Interface
==========================

Syntax:

    pragma Java_Interface ([Entity =>] abstract_tagged_type_LOCAL_NAME);

This pragma is used to assert that the specified Ada abstract tagged
type is to be mapped to a Java interface name.

See sections 7.1 and 7.2 of the `GNAT User's Guide: Supplement for the
JVM Platform.'  for related information.


File: gnat_rm.info,  Node: Pragma Keep_Names,  Next: Pragma License,  Prev: Pragma Java_Interface,  Up: Implementation Defined Pragmas

2.91 Pragma Keep_Names
======================

Syntax:

    pragma Keep_Names ([On =>] enumeration_first_subtype_LOCAL_NAME);

The `LOCAL_NAME' argument must refer to an enumeration first subtype in
the current declarative part. The effect is to retain the enumeration
literal names for use by `Image' and `Value' even if a global
`Discard_Names' pragma applies. This is useful when you want to
generally suppress enumeration literal names and for example you
therefore use a `Discard_Names' pragma in the `gnat.adc' file, but you
want to retain the names for specific enumeration types.


File: gnat_rm.info,  Node: Pragma License,  Next: Pragma Link_With,  Prev: Pragma Keep_Names,  Up: Implementation Defined Pragmas

2.92 Pragma License
===================

Syntax:

    pragma License (Unrestricted | GPL | Modified_GPL | Restricted);

This pragma is provided to allow automated checking for appropriate
license conditions with respect to the standard and modified GPL.  A
pragma `License', which is a configuration pragma that typically
appears at the start of a source file or in a separate `gnat.adc' file,
specifies the licensing conditions of a unit as follows:

   * Unrestricted This is used for a unit that can be freely used with
     no license restrictions.  Examples of such units are public domain
     units, and units from the Ada Reference Manual.

   * GPL This is used for a unit that is licensed under the unmodified
     GPL, and which therefore cannot be `with''ed by a restricted unit.

   * Modified_GPL This is used for a unit licensed under the GNAT
     modified GPL that includes a special exception paragraph that
     specifically permits the inclusion of the unit in programs without
     requiring the entire program to be released under the GPL.

   * Restricted This is used for a unit that is restricted in that it
     is not permitted to depend on units that are licensed under the
     GPL.  Typical examples are proprietary code that is to be released
     under more restrictive license conditions.  Note that restricted
     units are permitted to `with' units which are licensed under the
     modified GPL (this is the whole point of the modified GPL).

Normally a unit with no `License' pragma is considered to have an
unknown license, and no checking is done.  However, standard GNAT
headers are recognized, and license information is derived from them as
follows.

A GNAT license header starts with a line containing 78 hyphens.  The
following comment text is searched for the appearance of any of the
following strings.

If the string 'GNU General Public License' is found, then the unit is
assumed to have GPL license, unless the string 'As a special exception'
follows, in which case the license is assumed to be modified GPL.

If one of the strings 'This specification is adapted from the Ada
Semantic Interface' or 'This specification is derived from the Ada
Reference Manual' is found then the unit is assumed to be unrestricted.

These default actions means that a program with a restricted license
pragma will automatically get warnings if a GPL unit is inappropriately
`with''ed.  For example, the program:

    with Sem_Ch3;
    with GNAT.Sockets;
    procedure Secret_Stuff is
      ...
    end Secret_Stuff

if compiled with pragma `License' (`Restricted') in a `gnat.adc' file
will generate the warning:

    1.  with Sem_Ch3;
            |
       >>> license of withed unit "Sem_Ch3" is incompatible

    2.  with GNAT.Sockets;
    3.  procedure Secret_Stuff is

Here we get a warning on `Sem_Ch3' since it is part of the GNAT
compiler and is licensed under the GPL, but no warning for
`GNAT.Sockets' which is part of the GNAT run time, and is therefore
licensed under the modified GPL.


File: gnat_rm.info,  Node: Pragma Link_With,  Next: Pragma Linker_Alias,  Prev: Pragma License,  Up: Implementation Defined Pragmas

2.93 Pragma Link_With
=====================

Syntax:

    pragma Link_With (static_string_EXPRESSION {,static_string_EXPRESSION});

This pragma is provided for compatibility with certain Ada 83 compilers.
It has exactly the same effect as pragma `Linker_Options' except that
spaces occurring within one of the string expressions are treated as
separators. For example, in the following case:

    pragma Link_With ("-labc -ldef");

results in passing the strings `-labc' and `-ldef' as two separate
arguments to the linker. In addition pragma Link_With allows multiple
arguments, with the same effect as successive pragmas.


File: gnat_rm.info,  Node: Pragma Linker_Alias,  Next: Pragma Linker_Constructor,  Prev: Pragma Link_With,  Up: Implementation Defined Pragmas

2.94 Pragma Linker_Alias
========================

Syntax:

    pragma Linker_Alias (
      [Entity =>] LOCAL_NAME,
      [Target =>] static_string_EXPRESSION);

`LOCAL_NAME' must refer to an object that is declared at the library
level. This pragma establishes the given entity as a linker alias for
the given target. It is equivalent to `__attribute__((alias))' in GNU C
and causes `LOCAL_NAME' to be emitted as an alias for the symbol
`static_string_EXPRESSION' in the object file, that is to say no space
is reserved for `LOCAL_NAME' by the assembler and it will be resolved
to the same address as `static_string_EXPRESSION' by the linker.

The actual linker name for the target must be used (e.g., the fully
encoded name with qualification in Ada, or the mangled name in C++), or
it must be declared using the C convention with `pragma Import' or
`pragma Export'.

Not all target machines support this pragma. On some of them it is
accepted only if `pragma Weak_External' has been applied to
`LOCAL_NAME'.

    --  Example of the use of pragma Linker_Alias

    package p is
      i : Integer := 1;
      pragma Export (C, i);

      new_name_for_i : Integer;
      pragma Linker_Alias (new_name_for_i, "i");
    end p;


File: gnat_rm.info,  Node: Pragma Linker_Constructor,  Next: Pragma Linker_Destructor,  Prev: Pragma Linker_Alias,  Up: Implementation Defined Pragmas

2.95 Pragma Linker_Constructor
==============================

Syntax:

    pragma Linker_Constructor (procedure_LOCAL_NAME);

`procedure_LOCAL_NAME' must refer to a parameterless procedure that is
declared at the library level. A procedure to which this pragma is
applied will be treated as an initialization routine by the linker.  It
is equivalent to `__attribute__((constructor))' in GNU C and causes
`procedure_LOCAL_NAME' to be invoked before the entry point of the
executable is called (or immediately after the shared library is loaded
if the procedure is linked in a shared library), in particular before
the Ada run-time environment is set up.

Because of these specific contexts, the set of operations such a
procedure can perform is very limited and the type of objects it can
manipulate is essentially restricted to the elementary types. In
particular, it must only contain code to which pragma Restrictions
(No_Elaboration_Code) applies.

This pragma is used by GNAT to implement auto-initialization of shared
Stand Alone Libraries, which provides a related capability without the
restrictions listed above. Where possible, the use of Stand Alone
Libraries is preferable to the use of this pragma.


File: gnat_rm.info,  Node: Pragma Linker_Destructor,  Next: Pragma Linker_Section,  Prev: Pragma Linker_Constructor,  Up: Implementation Defined Pragmas

2.96 Pragma Linker_Destructor
=============================

Syntax:

    pragma Linker_Destructor (procedure_LOCAL_NAME);

`procedure_LOCAL_NAME' must refer to a parameterless procedure that is
declared at the library level. A procedure to which this pragma is
applied will be treated as a finalization routine by the linker.  It is
equivalent to `__attribute__((destructor))' in GNU C and causes
`procedure_LOCAL_NAME' to be invoked after the entry point of the
executable has exited (or immediately before the shared library is
unloaded if the procedure is linked in a shared library), in particular
after the Ada run-time environment is shut down.

See `pragma Linker_Constructor' for the set of restrictions that apply
because of these specific contexts.


File: gnat_rm.info,  Node: Pragma Linker_Section,  Next: Pragma Lock_Free,  Prev: Pragma Linker_Destructor,  Up: Implementation Defined Pragmas

2.97 Pragma Linker_Section
==========================

Syntax:

    pragma Linker_Section (
      [Entity  =>] LOCAL_NAME,
      [Section =>] static_string_EXPRESSION);

`LOCAL_NAME' must refer to an object, type, or subprogram that is
declared at the library level. This pragma specifies the name of the
linker section for the given entity. It is equivalent to
`__attribute__((section))' in GNU C and causes `LOCAL_NAME' to be
placed in the `static_string_EXPRESSION' section of the executable
(assuming the linker doesn't rename the section).  GNAT also provides
an implementation defined aspect of the same name.

In the case of specifying this aspect for a type, the effect is to
specify the corresponding for all library level objects of the type
which do not have an explicit linker section set. Note that this only
applies to whole objects, not to components of composite objects.

In the case of a subprogram, the linker section applies to all
previously declared matching overloaded subprograms in the current
declarative part which do not already have a linker section assigned.
The linker section aspect is useful in this case for specifying
different linker sections for different elements of such an overloaded
set.

Note that an empty string specifies that no linker section is specified.
This is not quite the same as omitting the pragma or aspect, since it
can be used to specify that one element of an overloaded set of
subprograms has the default linker section, or that one object of a
type for which a linker section is specified should has the default
linker section.

The compiler normally places library-level entities in standard sections
depending on the class: procedures and functions generally go in the
`.text' section, initialized variables in the `.data' section and
uninitialized variables in the `.bss' section.

Other, special sections may exist on given target machines to map
special hardware, for example I/O ports or flash memory. This pragma is
a means to defer the final layout of the executable to the linker, thus
fully working at the symbolic level with the compiler.

Some file formats do not support arbitrary sections so not all target
machines support this pragma. The use of this pragma may cause a program
execution to be erroneous if it is used to place an entity into an
inappropriate section (e.g., a modified variable into the `.text'
section). See also `pragma Persistent_BSS'.

    --  Example of the use of pragma Linker_Section

    package IO_Card is
      Port_A : Integer;
      pragma Volatile (Port_A);
      pragma Linker_Section (Port_A, ".bss.port_a");

      Port_B : Integer;
      pragma Volatile (Port_B);
      pragma Linker_Section (Port_B, ".bss.port_b");

      type Port_Type is new Integer with Linker_Section => ".bss";
      PA : Port_Type with Linker_Section => ".bss.PA";
      PB : Port_Type; --  ends up in linker section ".bss"

      procedure Q with Linker_Section => "Qsection";
    end IO_Card;


File: gnat_rm.info,  Node: Pragma Lock_Free,  Next: Pragma Loop_Invariant,  Prev: Pragma Linker_Section,  Up: Implementation Defined Pragmas

2.98 Pragma Lock_Free
=====================

Syntax: This pragma may be specified for protected types or objects. It
specifies that the implementation of protected operations must be
implemented without locks.  Compilation fails if the compiler cannot
generate lock-free code for the operations.


File: gnat_rm.info,  Node: Pragma Loop_Invariant,  Next: Pragma Loop_Optimize,  Prev: Pragma Lock_Free,  Up: Implementation Defined Pragmas

2.99 Pragma Loop_Invariant
==========================

Syntax:

    pragma Loop_Invariant ( boolean_EXPRESSION );

The effect of this pragma is similar to that of pragma `Assert', except
that in an `Assertion_Policy' pragma, the identifier `Loop_Invariant'
is used to control whether it is ignored or checked (or disabled).

`Loop_Invariant' can only appear as one of the items in the sequence of
statements of a loop body, or nested inside block statements that
appear in the sequence of statements of a loop body.  The intention is
that it be used to represent a "loop invariant" assertion, i.e.
something that is true each time through the loop, and which can be
used to show that the loop is achieving its purpose.

Multiple `Loop_Invariant' and `Loop_Variant' pragmas that apply to the
same loop should be grouped in the same sequence of statements.

To aid in writing such invariants, the special attribute `Loop_Entry'
may be used to refer to the value of an expression on entry to the
loop. This attribute can only be used within the expression of a
`Loop_Invariant' pragma. For full details, see documentation of
attribute `Loop_Entry'.


File: gnat_rm.info,  Node: Pragma Loop_Optimize,  Next: Pragma Loop_Variant,  Prev: Pragma Loop_Invariant,  Up: Implementation Defined Pragmas

2.100 Pragma Loop_Optimize
==========================

Syntax:

    pragma Loop_Optimize (OPTIMIZATION_HINT {, OPTIMIZATION_HINT});

    OPTIMIZATION_HINT ::= Ivdep | No_Unroll | Unroll | No_Vector | Vector

This pragma must appear immediately within a loop statement.  It allows
the programmer to specify optimization hints for the enclosing loop.
The hints are not mutually exclusive and can be freely mixed, but not
all combinations will yield a sensible outcome.

There are five supported optimization hints for a loop:

   * Ivdep

     The programmer asserts that there are no loop-carried dependencies
     which would prevent consecutive iterations of the loop from being
     executed simultaneously.

   * No_Unroll

     The loop must not be unrolled.  This is a strong hint: the
     compiler will not unroll a loop marked with this hint.

   * Unroll

     The loop should be unrolled.  This is a weak hint: the compiler
     will try to apply unrolling to this loop preferably to other
     optimizations, notably vectorization, but there is no guarantee
     that the loop will be unrolled.

   * No_Vector

     The loop must not be vectorized.  This is a strong hint: the
     compiler will not vectorize a loop marked with this hint.

   * Vector

     The loop should be vectorized.  This is a weak hint: the compiler
     will try to apply vectorization to this loop preferably to other
     optimizations, notably unrolling, but there is no guarantee that
     the loop will be vectorized.

These hints do not remove the need to pass the appropriate switches to
the compiler in order to enable the relevant optimizations, that is to
say `-funroll-loops' for unrolling and `-ftree-vectorize' for
vectorization.


File: gnat_rm.info,  Node: Pragma Loop_Variant,  Next: Pragma Machine_Attribute,  Prev: Pragma Loop_Optimize,  Up: Implementation Defined Pragmas

2.101 Pragma Loop_Variant
=========================

Syntax:

    pragma Loop_Variant ( LOOP_VARIANT_ITEM {, LOOP_VARIANT_ITEM } );
    LOOP_VARIANT_ITEM ::= CHANGE_DIRECTION => discrete_EXPRESSION
    CHANGE_DIRECTION ::= Increases | Decreases

`Loop_Variant' can only appear as one of the items in the sequence of
statements of a loop body, or nested inside block statements that
appear in the sequence of statements of a loop body.  It allows the
specification of quantities which must always decrease or increase in
successive iterations of the loop. In its simplest form, just one
expression is specified, whose value must increase or decrease on each
iteration of the loop.

In a more complex form, multiple arguments can be given which are
intepreted in a nesting lexicographic manner. For example:

    pragma Loop_Variant (Increases => X, Decreases => Y);

specifies that each time through the loop either X increases, or X stays
the same and Y decreases. A `Loop_Variant' pragma ensures that the loop
is making progress. It can be useful in helping to show informally or
prove formally that the loop always terminates.

`Loop_Variant' is an assertion whose effect can be controlled using an
`Assertion_Policy' with a check name of `Loop_Variant'. The policy can
be `Check' to enable the loop variant check, `Ignore' to ignore the
check (in which case the pragma has no effect on the program), or
`Disable' in which case the pragma is not even checked for correct
syntax.

Multiple `Loop_Invariant' and `Loop_Variant' pragmas that apply to the
same loop should be grouped in the same sequence of statements.

The `Loop_Entry' attribute may be used within the expressions of the
`Loop_Variant' pragma to refer to values on entry to the loop.


File: gnat_rm.info,  Node: Pragma Machine_Attribute,  Next: Pragma Main,  Prev: Pragma Loop_Variant,  Up: Implementation Defined Pragmas

2.102 Pragma Machine_Attribute
==============================

Syntax:

    pragma Machine_Attribute (
         [Entity         =>] LOCAL_NAME,
         [Attribute_Name =>] static_string_EXPRESSION
      [, [Info           =>] static_EXPRESSION] );

Machine-dependent attributes can be specified for types and/or
declarations.  This pragma is semantically equivalent to
`__attribute__((`attribute_name'))` (if `info' is not specified) or
`__attribute__((`attribute_name`(`info'))) in GNU C, where
`attribute_name' is recognized by the compiler middle-end or the
`TARGET_ATTRIBUTE_TABLE' machine specific macro.  A string literal for
the optional parameter `info' is transformed into an identifier, which
may make this pragma unusable for some attributes.  For further
information see `GNU Compiler Collection (GCC) Internals'.


File: gnat_rm.info,  Node: Pragma Main,  Next: Pragma Main_Storage,  Prev: Pragma Machine_Attribute,  Up: Implementation Defined Pragmas

2.103 Pragma Main
=================

Syntax:

    pragma Main
     (MAIN_OPTION [, MAIN_OPTION]);

    MAIN_OPTION ::=
      [Stack_Size              =>] static_integer_EXPRESSION
    | [Task_Stack_Size_Default =>] static_integer_EXPRESSION
    | [Time_Slicing_Enabled    =>] static_boolean_EXPRESSION

This pragma is provided for compatibility with OpenVMS VAX Systems.  It
has no effect in GNAT, other than being syntax checked.


File: gnat_rm.info,  Node: Pragma Main_Storage,  Next: Pragma No_Body,  Prev: Pragma Main,  Up: Implementation Defined Pragmas

2.104 Pragma Main_Storage
=========================

Syntax:

    pragma Main_Storage
      (MAIN_STORAGE_OPTION [, MAIN_STORAGE_OPTION]);

    MAIN_STORAGE_OPTION ::=
      [WORKING_STORAGE =>] static_SIMPLE_EXPRESSION
    | [TOP_GUARD       =>] static_SIMPLE_EXPRESSION

This pragma is provided for compatibility with OpenVMS VAX Systems.  It
has no effect in GNAT, other than being syntax checked.


File: gnat_rm.info,  Node: Pragma No_Body,  Next: Pragma No_Elaboration_Code_All,  Prev: Pragma Main_Storage,  Up: Implementation Defined Pragmas

2.105 Pragma No_Body
====================

Syntax:

    pragma No_Body;

There are a number of cases in which a package spec does not require a
body, and in fact a body is not permitted. GNAT will not permit the
spec to be compiled if there is a body around. The pragma No_Body
allows you to provide a body file, even in a case where no body is
allowed. The body file must contain only comments and a single No_Body
pragma. This is recognized by the compiler as indicating that no body
is logically present.

This is particularly useful during maintenance when a package is
modified in such a way that a body needed before is no longer needed.
The provision of a dummy body with a No_Body pragma ensures that there
is no interference from earlier versions of the package body.


File: gnat_rm.info,  Node: Pragma No_Elaboration_Code_All,  Next: Pragma No_Inline,  Prev: Pragma No_Body,  Up: Implementation Defined Pragmas

2.106 Pragma No_Elaboration_Code_All
====================================

Syntax:

    pragma No_Elaboration_Code_All [(program_unit_NAME)];

This is a program unit pragma (there is also an equivalent aspect of the
same name) that establishes the restriction `No_Elaboration_Code' for
the current unit and any extended main source units (body and subunits.
It also has has the effect of enforcing a transitive application of this
aspect, so that if any unit is implicitly or explicitly WITH'ed by the
current unit, it must also have the No_Elaboration_Code_All aspect set.
It may be applied to package or subprogram specs or their generic
versions.


File: gnat_rm.info,  Node: Pragma No_Inline,  Next: Pragma No_Return,  Prev: Pragma No_Elaboration_Code_All,  Up: Implementation Defined Pragmas

2.107 Pragma No_Inline
======================

Syntax:

    pragma No_Inline (NAME {, NAME});

This pragma suppresses inlining for the callable entity or the
instances of the generic subprogram designated by `NAME', including
inlining that results from the use of pragma `Inline'.  This pragma is
always active, in particular it is not subject to the use of option
`-gnatn' or `-gnatN'.  It is illegal to specify both pragma `No_Inline'
and pragma `Inline_Always' for the same `NAME'.


File: gnat_rm.info,  Node: Pragma No_Return,  Next: Pragma No_Run_Time,  Prev: Pragma No_Inline,  Up: Implementation Defined Pragmas

2.108 Pragma No_Return
======================

Syntax:

    pragma No_Return (procedure_LOCAL_NAME {, procedure_LOCAL_NAME});

Each `procedure_LOCAL_NAME' argument must refer to one or more procedure
declarations in the current declarative part.  A procedure to which this
pragma is applied may not contain any explicit `return' statements.  In
addition, if the procedure contains any implicit returns from falling
off the end of a statement sequence, then execution of that implicit
return will cause Program_Error to be raised.

One use of this pragma is to identify procedures whose only purpose is
to raise an exception. Another use of this pragma is to suppress
incorrect warnings about missing returns in functions, where the last
statement of a function statement sequence is a call to such a
procedure.

Note that in Ada 2005 mode, this pragma is part of the language. It is
available in all earlier versions of Ada as an implementation-defined
pragma.


File: gnat_rm.info,  Node: Pragma No_Run_Time,  Next: Pragma No_Strict_Aliasing,  Prev: Pragma No_Return,  Up: Implementation Defined Pragmas

2.109 Pragma No_Run_Time
========================

Syntax:

    pragma No_Run_Time;

This is an obsolete configuration pragma that historically was used to
set up a runtime library with no object code. It is now used only for
internal testing. The pragma has been superseded by the reconfigurable
runtime capability of `GNAT'.


File: gnat_rm.info,  Node: Pragma No_Strict_Aliasing,  Next: Pragma No_Tagged_Streams,  Prev: Pragma No_Run_Time,  Up: Implementation Defined Pragmas

2.110 Pragma No_Strict_Aliasing
===============================

Syntax:

    pragma No_Strict_Aliasing [([Entity =>] type_LOCAL_NAME)];

`type_LOCAL_NAME' must refer to an access type declaration in the
current declarative part.  The effect is to inhibit strict aliasing
optimization for the given type.  The form with no arguments is a
configuration pragma which applies to all access types declared in
units to which the pragma applies. For a detailed description of the
strict aliasing optimization, and the situations in which it must be
suppressed, see the section on Optimization and Strict Aliasing in the
`GNAT User's Guide'.

This pragma currently has no effects on access to unconstrained array
types.


File: gnat_rm.info,  Node: Pragma No_Tagged_Streams,  Next: Pragma Normalize_Scalars,  Prev: Pragma No_Strict_Aliasing,  Up: Implementation Defined Pragmas

2.111 Pragma No_Tagged_Streams
==============================

Syntax:

    pragma No_Tagged_Streams;
    pragma No_Tagged_Streams [([Entity =>] tagged_type_LOCAL_NAME)];

Normally when a tagged type is introduced using a full type declaration,
part of the processing includes generating stream access routines to be
used by stream attributes referencing the type (or one of its subtypes
or derived types). This can involve the generation of significant
amounts of code which is wasted space if stream routines are not needed
for the type in question.

The `No_Tagged_Streams' pragma causes the generation of these stream
routines to be skipped, and any attempt to use stream operations on
types subject to this pragma will be statically rejected as illegal.

There are two forms of the pragma. The form with no arguments must
appear in a declarative sequence or in the declarations of a package
spec. This pragma affects all subsequent root tagged types declared in
the declaration sequence, and specifies that no stream routines be
generated. The form with an argument (for which there is also a
corresponding aspect) specifies a single root tagged type for which
stream routines are not to be generated.

Once the pragma has been given for a particular root tagged type, all
subtypes and derived types of this type inherit the pragma
automatically, so the effect applies to a complete hierarchy (this is
necessary to deal with the class-wide dispatching versions of the
stream routines).


File: gnat_rm.info,  Node: Pragma Normalize_Scalars,  Next: Pragma Obsolescent,  Prev: Pragma No_Tagged_Streams,  Up: Implementation Defined Pragmas

2.112 Pragma Normalize_Scalars
==============================

Syntax:

    pragma Normalize_Scalars;

This is a language defined pragma which is fully implemented in GNAT.
The effect is to cause all scalar objects that are not otherwise
initialized to be initialized.  The initial values are implementation
dependent and are as follows:

`Standard.Character'
     Objects whose root type is Standard.Character are initialized to
     Character'Last unless the subtype range excludes NUL (in which case
     NUL is used). This choice will always generate an invalid value if
     one exists.

`Standard.Wide_Character'
     Objects whose root type is Standard.Wide_Character are initialized
     to Wide_Character'Last unless the subtype range excludes NUL (in
     which case NUL is used). This choice will always generate an
     invalid value if one exists.

`Standard.Wide_Wide_Character'
     Objects whose root type is Standard.Wide_Wide_Character are
     initialized to the invalid value 16#FFFF_FFFF# unless the subtype
     range excludes NUL (in which case NUL is used). This choice will
     always generate an invalid value if one exists.

`Integer types'
     Objects of an integer type are treated differently depending on
     whether negative values are present in the subtype. If no negative
     values are present, then all one bits is used as the initial value
     except in the special case where zero is excluded from the
     subtype, in which case all zero bits are used. This choice will
     always generate an invalid value if one exists.

     For subtypes with negative values present, the largest negative
     number is used, except in the unusual case where this largest
     negative number is in the subtype, and the largest positive number
     is not, in which case the largest positive value is used. This
     choice will always generate an invalid value if one exists.

`Floating-Point Types'
     Objects of all floating-point types are initialized to all 1-bits.
     For standard IEEE format, this corresponds to a NaN (not a number)
     which is indeed an invalid value.

`Fixed-Point Types'
     Objects of all fixed-point types are treated as described above
     for integers, with the rules applying to the underlying integer
     value used to represent the fixed-point value.

`Modular types'
     Objects of a modular type are initialized to all one bits, except
     in the special case where zero is excluded from the subtype, in
     which case all zero bits are used. This choice will always
     generate an invalid value if one exists.

`Enumeration types'
     Objects of an enumeration type are initialized to all one-bits,
     i.e., to the value `2 ** typ'Size - 1' unless the subtype excludes
     the literal whose Pos value is zero, in which case a code of zero
     is used. This choice will always generate an invalid value if one
     exists.


File: gnat_rm.info,  Node: Pragma Obsolescent,  Next: Pragma Optimize_Alignment,  Prev: Pragma Normalize_Scalars,  Up: Implementation Defined Pragmas

2.113 Pragma Obsolescent
========================

Syntax:

    pragma Obsolescent;

    pragma Obsolescent (
      [Message =>] static_string_EXPRESSION
    [,[Version =>] Ada_05]]);

    pragma Obsolescent (
      [Entity  =>] NAME
    [,[Message =>] static_string_EXPRESSION
    [,[Version =>] Ada_05]] );

This pragma can occur immediately following a declaration of an entity,
including the case of a record component. If no Entity argument is
present, then this declaration is the one to which the pragma applies.
If an Entity parameter is present, it must either match the name of the
entity in this declaration, or alternatively, the pragma can
immediately follow an enumeration type declaration, where the Entity
argument names one of the enumeration literals.

This pragma is used to indicate that the named entity is considered
obsolescent and should not be used. Typically this is used when an API
must be modified by eventually removing or modifying existing
subprograms or other entities. The pragma can be used at an
intermediate stage when the entity is still present, but will be
removed later.

The effect of this pragma is to output a warning message on a reference
to an entity thus marked that the subprogram is obsolescent if the
appropriate warning option in the compiler is activated. If the Message
parameter is present, then a second warning message is given containing
this text. In addition, a reference to the entity is considered to be a
violation of pragma Restrictions (No_Obsolescent_Features).

This pragma can also be used as a program unit pragma for a package, in
which case the entity name is the name of the package, and the pragma
indicates that the entire package is considered obsolescent. In this
case a client `with''ing such a package violates the restriction, and
the `with' statement is flagged with warnings if the warning option is
set.

If the Version parameter is present (which must be exactly the
identifier Ada_05, no other argument is allowed), then the indication
of obsolescence applies only when compiling in Ada 2005 mode. This is
primarily intended for dealing with the situations in the predefined
library where subprograms or packages have become defined as
obsolescent in Ada 2005 (e.g., in Ada.Characters.Handling), but may be
used anywhere.

The following examples show typical uses of this pragma:

    package p is
       pragma Obsolescent (p, Message => "use pp instead of p");
    end p;

    package q is
       procedure q2;
       pragma Obsolescent ("use q2new instead");

       type R is new integer;
       pragma Obsolescent
         (Entity  => R,
          Message => "use RR in Ada 2005",
          Version => Ada_05);

       type M is record
          F1 : Integer;
          F2 : Integer;
          pragma Obsolescent;
          F3 : Integer;
       end record;

       type E is (a, bc, 'd', quack);
       pragma Obsolescent (Entity => bc)
       pragma Obsolescent (Entity => 'd')

       function "+"
         (a, b : character) return character;
       pragma Obsolescent (Entity => "+");
    end;

Note that, as for all pragmas, if you use a pragma argument identifier,
then all subsequent parameters must also use a pragma argument
identifier.  So if you specify "Entity =>" for the Entity argument, and
a Message argument is present, it must be preceded by "Message =>".


File: gnat_rm.info,  Node: Pragma Optimize_Alignment,  Next: Pragma Ordered,  Prev: Pragma Obsolescent,  Up: Implementation Defined Pragmas

2.114 Pragma Optimize_Alignment
===============================

Syntax:

    pragma Optimize_Alignment (TIME | SPACE | OFF);

This is a configuration pragma which affects the choice of default
alignments for types and objects where no alignment is explicitly
specified. There is a time/space trade-off in the selection of these
values. Large alignments result in more efficient code, at the expense
of larger data space, since sizes have to be increased to match these
alignments. Smaller alignments save space, but the access code is
slower. The normal choice of default alignments for types and
individual alignment promotions for objects (which is what you get if
you do not use this pragma, or if you use an argument of OFF), tries to
balance these two requirements.

Specifying SPACE causes smaller default alignments to be chosen in two
cases.  First any packed record is given an alignment of 1. Second, if
a size is given for the type, then the alignment is chosen to avoid
increasing this size. For example, consider:

    type R is record
       X : Integer;
       Y : Character;
    end record;

    for R'Size use 5*8;

In the default mode, this type gets an alignment of 4, so that access
to the Integer field X are efficient. But this means that objects of
the type end up with a size of 8 bytes. This is a valid choice, since
sizes of objects are allowed to be bigger than the size of the type,
but it can waste space if for example fields of type R appear in an
enclosing record. If the above type is compiled in `Optimize_Alignment
(Space)' mode, the alignment is set to 1.

However, there is one case in which SPACE is ignored. If a variable
length record (that is a discriminated record with a component which is
an array whose length depends on a discriminant), has a pragma Pack,
then it is not in general possible to set the alignment of such a
record to one, so the pragma is ignored in this case (with a warning).

Specifying SPACE also disables alignment promotions for standalone
objects, which occur when the compiler increases the alignment of a
specific object without changing the alignment of its type.

Specifying TIME causes larger default alignments to be chosen in the
case of small types with sizes that are not a power of 2. For example,
consider:

    type R is record
       A : Character;
       B : Character;
       C : Boolean;
    end record;

    pragma Pack (R);
    for R'Size use 17;

The default alignment for this record is normally 1, but if this type is
compiled in `Optimize_Alignment (Time)' mode, then the alignment is set
to 4, which wastes space for objects of the type, since they are now 4
bytes long, but results in more efficient access when the whole record
is referenced.

As noted above, this is a configuration pragma, and there is a
requirement that all units in a partition be compiled with a consistent
setting of the optimization setting. This would normally be achieved by
use of a configuration pragma file containing the appropriate setting.
The exception to this rule is that units with an explicit configuration
pragma in the same file as the source unit are excluded from the
consistency check, as are all predefined units. The latter are compiled
by default in pragma Optimize_Alignment (Off) mode if no pragma appears
at the start of the file.


File: gnat_rm.info,  Node: Pragma Ordered,  Next: Pragma Overflow_Mode,  Prev: Pragma Optimize_Alignment,  Up: Implementation Defined Pragmas

2.115 Pragma Ordered
====================

Syntax:

    pragma Ordered (enumeration_first_subtype_LOCAL_NAME);

Most enumeration types are from a conceptual point of view unordered.
For example, consider:

    type Color is (Red, Blue, Green, Yellow);

By Ada semantics `Blue > Red' and `Green > Blue', but really these
relations make no sense; the enumeration type merely specifies a set of
possible colors, and the order is unimportant.

For unordered enumeration types, it is generally a good idea if clients
avoid comparisons (other than equality or inequality) and explicit
ranges. (A `client' is a unit where the type is referenced, other than
the unit where the type is declared, its body, and its subunits.)  For
example, if code buried in some client says:

    if Current_Color < Yellow then ...
    if Current_Color in Blue .. Green then ...

then the client code is relying on the order, which is undesirable.  It
makes the code hard to read and creates maintenance difficulties if
entries have to be added to the enumeration type. Instead, the code in
the client should list the possibilities, or an appropriate subtype
should be declared in the unit that declares the original enumeration
type. E.g., the following subtype could be declared along with the type
`Color':

    subtype RBG is Color range Red .. Green;

and then the client could write:

    if Current_Color in RBG then ...
    if Current_Color = Blue or Current_Color = Green then ...

However, some enumeration types are legitimately ordered from a
conceptual point of view. For example, if you declare:

    type Day is (Mon, Tue, Wed, Thu, Fri, Sat, Sun);

then the ordering imposed by the language is reasonable, and clients
can depend on it, writing for example:

    if D in Mon .. Fri then ...
    if D < Wed then ...

The pragma `Ordered' is provided to mark enumeration types that are
conceptually ordered, alerting the reader that clients may depend on
the ordering. GNAT provides a pragma to mark enumerations as ordered
rather than one to mark them as unordered, since in our experience, the
great majority of enumeration types are conceptually unordered.

The types `Boolean', `Character', `Wide_Character', and
`Wide_Wide_Character' are considered to be ordered types, so each is
declared with a pragma `Ordered' in package `Standard'.

Normally pragma `Ordered' serves only as documentation and a guide for
coding standards, but GNAT provides a warning switch `-gnatw.u' that
requests warnings for inappropriate uses (comparisons and explicit
subranges) for unordered types. If this switch is used, then any
enumeration type not marked with pragma `Ordered' will be considered as
unordered, and will generate warnings for inappropriate uses.

Note that generic types are not considered ordered or unordered (since
the template can be instantiated for both cases), so we never generate
warnings for the case of generic enumerated types.

For additional information please refer to the description of the
`-gnatw.u' switch in the GNAT User's Guide.


File: gnat_rm.info,  Node: Pragma Overflow_Mode,  Next: Pragma Overriding_Renamings,  Prev: Pragma Ordered,  Up: Implementation Defined Pragmas

2.116 Pragma Overflow_Mode
==========================

Syntax:

    pragma Overflow_Mode
     (  [General    =>] MODE
      [,[Assertions =>] MODE]);

    MODE ::= STRICT | MINIMIZED | ELIMINATED

This pragma sets the current overflow mode to the given setting. For
details of the meaning of these modes, please refer to the 'Overflow
Check Handling in GNAT' appendix in the GNAT User's Guide. If only the
`General' parameter is present, the given mode applies to all
expressions. If both parameters are present, the `General' mode applies
to expressions outside assertions, and the `Eliminated' mode applies to
expressions within assertions.

The case of the `MODE' parameter is ignored, so `MINIMIZED',
`Minimized' and `minimized' all have the same effect.

The `Overflow_Mode' pragma has the same scoping and placement rules as
pragma `Suppress', so it can occur either as a configuration pragma,
specifying a default for the whole program, or in a declarative scope,
where it applies to the remaining declarations and statements in that
scope.

The pragma `Suppress (Overflow_Check)' suppresses overflow checking,
but does not affect the overflow mode.

The pragma `Unsuppress (Overflow_Check)' unsuppresses (enables)
overflow checking, but does not affect the overflow mode.


File: gnat_rm.info,  Node: Pragma Overriding_Renamings,  Next: Pragma Partition_Elaboration_Policy,  Prev: Pragma Overflow_Mode,  Up: Implementation Defined Pragmas

2.117 Pragma Overriding_Renamings
=================================

Syntax:

    pragma Overriding_Renamings;

This is a GNAT configuration pragma to simplify porting legacy code
accepted by the Rational Ada compiler. In the presence of this pragma,
a renaming declaration that renames an inherited operation declared in
the same scope is legal if selected notation is used as in:

    pragma Overriding_Renamings;
    ...
    package R is
      function F (..);
      ...
      function F (..) renames R.F;
    end R;

even though RM 8.3 (15) stipulates that an overridden operation is not
visible within the declaration of the overriding operation.


File: gnat_rm.info,  Node: Pragma Partition_Elaboration_Policy,  Next: Pragma Part_Of,  Prev: Pragma Overriding_Renamings,  Up: Implementation Defined Pragmas

2.118 Pragma Partition_Elaboration_Policy
=========================================

Syntax:

    pragma Partition_Elaboration_Policy (POLICY_IDENTIFIER);

    POLICY_IDENTIFIER ::= Concurrent | Sequential

This pragma is standard in Ada 2005, but is available in all earlier
versions of Ada as an implementation-defined pragma.  See Ada 2012
Reference Manual for details.


File: gnat_rm.info,  Node: Pragma Part_Of,  Next: Pragma Passive,  Prev: Pragma Partition_Elaboration_Policy,  Up: Implementation Defined Pragmas

2.119 Pragma Part_Of
====================

For the description of this pragma, see SPARK 2014 Reference Manual,
section 7.2.6.


File: gnat_rm.info,  Node: Pragma Passive,  Next: Pragma Persistent_BSS,  Prev: Pragma Part_Of,  Up: Implementation Defined Pragmas

2.120 Pragma Passive
====================

Syntax:

    pragma Passive [(Semaphore | No)];

Syntax checked, but otherwise ignored by GNAT.  This is recognized for
compatibility with DEC Ada 83 implementations, where it is used within a
task definition to request that a task be made passive.  If the argument
`Semaphore' is present, or the argument is omitted, then DEC Ada 83
treats the pragma as an assertion that the containing task is passive
and that optimization of context switch with this task is permitted and
desired.  If the argument `No' is present, the task must not be
optimized.  GNAT does not attempt to optimize any tasks in this manner
(since protected objects are available in place of passive tasks).

For more information on the subject of passive tasks, see the section
'Passive Task Optimization' in the GNAT Users Guide.


File: gnat_rm.info,  Node: Pragma Persistent_BSS,  Next: Pragma Polling,  Prev: Pragma Passive,  Up: Implementation Defined Pragmas

2.121 Pragma Persistent_BSS
===========================

Syntax:

    pragma Persistent_BSS [(LOCAL_NAME)]

This pragma allows selected objects to be placed in the
`.persistent_bss' section. On some targets the linker and loader
provide for special treatment of this section, allowing a program to be
reloaded without affecting the contents of this data (hence the name
persistent).

There are two forms of usage. If an argument is given, it must be the
local name of a library level object, with no explicit initialization
and whose type is potentially persistent. If no argument is given, then
the pragma is a configuration pragma, and applies to all library level
objects with no explicit initialization of potentially persistent types.

A potentially persistent type is a scalar type, or an untagged,
non-discriminated record, all of whose components have no explicit
initialization and are themselves of a potentially persistent type, or
an array, all of whose constraints are static, and whose component type
is potentially persistent.

If this pragma is used on a target where this feature is not supported,
then the pragma will be ignored. See also `pragma Linker_Section'.


File: gnat_rm.info,  Node: Pragma Polling,  Next: Pragma Post,  Prev: Pragma Persistent_BSS,  Up: Implementation Defined Pragmas

2.122 Pragma Polling
====================

Syntax:

    pragma Polling (ON | OFF);

This pragma controls the generation of polling code.  This is normally
off.  If `pragma Polling (ON)' is used then periodic calls are
generated to the routine `Ada.Exceptions.Poll'.  This routine is a
separate unit in the runtime library, and can be found in file
`a-excpol.adb'.

Pragma `Polling' can appear as a configuration pragma (for example it
can be placed in the `gnat.adc' file) to enable polling globally, or it
can be used in the statement or declaration sequence to control polling
more locally.

A call to the polling routine is generated at the start of every loop
and at the start of every subprogram call.  This guarantees that the
`Poll' routine is called frequently, and places an upper bound
(determined by the complexity of the code) on the period between two
`Poll' calls.

The primary purpose of the polling interface is to enable asynchronous
aborts on targets that cannot otherwise support it (for example Windows
NT), but it may be used for any other purpose requiring periodic
polling.  The standard version is null, and can be replaced by a user
program.  This will require re-compilation of the `Ada.Exceptions'
package that can be found in files `a-except.ads' and `a-except.adb'.

A standard alternative unit (in file `4wexcpol.adb' in the standard GNAT
distribution) is used to enable the asynchronous abort capability on
targets that do not normally support the capability.  The version of
`Poll' in this file makes a call to the appropriate runtime routine to
test for an abort condition.

Note that polling can also be enabled by use of the `-gnatP' switch.
See the section on switches for gcc in the `GNAT User's Guide'.


File: gnat_rm.info,  Node: Pragma Post,  Next: Pragma Postcondition,  Prev: Pragma Polling,  Up: Implementation Defined Pragmas

2.123 Pragma Post
=================

Syntax:

    pragma Post (Boolean_Expression);

The `Post' pragma is intended to be an exact replacement for the
language-defined `Post' aspect, and shares its restrictions and
semantics.  It must appear either immediately following the
corresponding subprogram declaration (only other pragmas may
intervene), or if there is no separate subprogram declaration, then it
can appear at the start of the declarations in a subprogram body
(preceded only by other pragmas).


File: gnat_rm.info,  Node: Pragma Postcondition,  Next: Pragma Post_Class,  Prev: Pragma Post,  Up: Implementation Defined Pragmas

2.124 Pragma Postcondition
==========================

Syntax:

    pragma Postcondition (
       [Check   =>] Boolean_Expression
     [,[Message =>] String_Expression]);

The `Postcondition' pragma allows specification of automatic
postcondition checks for subprograms. These checks are similar to
assertions, but are automatically inserted just prior to the return
statements of the subprogram with which they are associated (including
implicit returns at the end of procedure bodies and associated
exception handlers).

In addition, the boolean expression which is the condition which must
be true may contain references to function'Result in the case of a
function to refer to the returned value.

`Postcondition' pragmas may appear either immediately following the
(separate) declaration of a subprogram, or at the start of the
declarations of a subprogram body. Only other pragmas may intervene
(that is appear between the subprogram declaration and its
postconditions, or appear before the postcondition in the declaration
sequence in a subprogram body). In the case of a postcondition
appearing after a subprogram declaration, the formal arguments of the
subprogram are visible, and can be referenced in the postcondition
expressions.

The postconditions are collected and automatically tested just before
any return (implicit or explicit) in the subprogram body.  A
postcondition is only recognized if postconditions are active at the
time the pragma is encountered. The compiler switch `gnata' turns on
all postconditions by default, and pragma `Check_Policy' with an
identifier of `Postcondition' can also be used to control whether
postconditions are active.

The general approach is that postconditions are placed in the spec if
they represent functional aspects which make sense to the client.  For
example we might have:

    function Direction return Integer;
    pragma Postcondition
     (Direction'Result = +1
        or else
      Direction'Result = -1);

which serves to document that the result must be +1 or -1, and will
test that this is the case at run time if postcondition checking is
active.

Postconditions within the subprogram body can be used to check that
some internal aspect of the implementation, not visible to the client,
is operating as expected.  For instance if a square root routine keeps
an internal counter of the number of times it is called, then we might
have the following postcondition:

    Sqrt_Calls : Natural := 0;

    function Sqrt (Arg : Float) return Float is
      pragma Postcondition
        (Sqrt_Calls = Sqrt_Calls'Old + 1);
      ...
    end Sqrt

As this example, shows, the use of the `Old' attribute is often useful
in postconditions to refer to the state on entry to the subprogram.

Note that postconditions are only checked on normal returns from the
subprogram. If an abnormal return results from raising an exception,
then the postconditions are not checked.

If a postcondition fails, then the exception
`System.Assertions.Assert_Failure' is raised. If a message argument was
supplied, then the given string will be used as the exception message.
If no message argument was supplied, then the default message has the
form "Postcondition failed at file_name:line". The exception is raised
in the context of the subprogram body, so it is possible to catch
postcondition failures within the subprogram body itself.

Within a package spec, normal visibility rules in Ada would prevent
forward references within a postcondition pragma to functions defined
later in the same package. This would introduce undesirable ordering
constraints. To avoid this problem, all postcondition pragmas are
analyzed at the end of the package spec, allowing forward references.

The following example shows that this even allows mutually recursive
postconditions as in:

    package Parity_Functions is
       function Odd  (X : Natural) return Boolean;
       pragma Postcondition
         (Odd'Result =
            (x = 1
              or else
            (x /= 0 and then Even (X - 1))));

       function Even (X : Natural) return Boolean;
       pragma Postcondition
         (Even'Result =
            (x = 0
              or else
            (x /= 1 and then Odd (X - 1))));

    end Parity_Functions;

There are no restrictions on the complexity or form of conditions used
within `Postcondition' pragmas.  The following example shows that it is
even possible to verify performance behavior.

    package Sort is

       Performance : constant Float;
       --  Performance constant set by implementation
       --  to match target architecture behavior.

       procedure Treesort (Arg : String);
       --  Sorts characters of argument using N*logN sort
       pragma Postcondition
         (Float (Clock - Clock'Old) <=
            Float (Arg'Length) *
            log (Float (Arg'Length)) *
            Performance);
    end Sort;

Note: postcondition pragmas associated with subprograms that are marked
as Inline_Always, or those marked as Inline with front-end inlining
(-gnatN option set) are accepted and legality-checked by the compiler,
but are ignored at run-time even if postcondition checking is enabled.

Note that pragma `Postcondition' differs from the language-defined
`Post' aspect (and corresponding `Post' pragma) in allowing multiple
occurrences, allowing occurences in the body even if there is a
separate spec, and allowing a second string parameter, and the use of
the pragma identifier `Check'. Historically, pragma `Postcondition' was
implemented prior to the development of Ada 2012, and has been retained
in its original form for compatibility purposes.


File: gnat_rm.info,  Node: Pragma Post_Class,  Next: Pragma Pre,  Prev: Pragma Postcondition,  Up: Implementation Defined Pragmas

2.125 Pragma Post_Class
=======================

Syntax:

    pragma Post_Class (Boolean_Expression);

The `Post_Class' pragma is intended to be an exact replacement for the
language-defined `Post'Class' aspect, and shares its restrictions and
semantics.  It must appear either immediately following the
corresponding subprogram declaration (only other pragmas may
intervene), or if there is no separate subprogram declaration, then it
can appear at the start of the declarations in a subprogram body
(preceded only by other pragmas).

Note: This pragma is called `Post_Class' rather than `Post'Class'
because the latter would not be strictly conforming to the allowed
syntax for pragmas. The motivation for provinding pragmas equivalent to
the aspects is to allow a program to be written using the pragmas, and
then compiled if necessary using an Ada compiler that does not
recognize the pragmas or aspects, but is prepared to ignore the
pragmas. The assertion policy that controls this pragma is
`Post'Class', not `Post_Class'.


File: gnat_rm.info,  Node: Pragma Pre,  Next: Pragma Precondition,  Prev: Pragma Post_Class,  Up: Implementation Defined Pragmas

2.126 Pragma Pre
================

Syntax:

    pragma Pre (Boolean_Expression);

The `Pre' pragma is intended to be an exact replacement for the
language-defined `Pre' aspect, and shares its restrictions and
semantics.  It must appear either immediately following the
corresponding subprogram declaration (only other pragmas may
intervene), or if there is no separate subprogram declaration, then it
can appear at the start of the declarations in a subprogram body
(preceded only by other pragmas).


File: gnat_rm.info,  Node: Pragma Precondition,  Next: Pragma Predicate,  Prev: Pragma Pre,  Up: Implementation Defined Pragmas

2.127 Pragma Precondition
=========================

Syntax:

    pragma Precondition (
       [Check   =>] Boolean_Expression
     [,[Message =>] String_Expression]);

The `Precondition' pragma is similar to `Postcondition' except that the
corresponding checks take place immediately upon entry to the
subprogram, and if a precondition fails, the exception is raised in the
context of the caller, and the attribute 'Result cannot be used within
the precondition expression.

Otherwise, the placement and visibility rules are identical to those
described for postconditions. The following is an example of use within
a package spec:

    package Math_Functions is
       ...
       function Sqrt (Arg : Float) return Float;
       pragma Precondition (Arg >= 0.0)
       ...
    end Math_Functions;

`Precondition' pragmas may appear either immediately following the
(separate) declaration of a subprogram, or at the start of the
declarations of a subprogram body. Only other pragmas may intervene
(that is appear between the subprogram declaration and its
postconditions, or appear before the postcondition in the declaration
sequence in a subprogram body).

Note: precondition pragmas associated with subprograms that are marked
as Inline_Always, or those marked as Inline with front-end inlining
(-gnatN option set) are accepted and legality-checked by the compiler,
but are ignored at run-time even if precondition checking is enabled.

Note that pragma `Precondition' differs from the language-defined `Pre'
aspect (and corresponding `Pre' pragma) in allowing multiple
occurrences, allowing occurences in the body even if there is a
separate spec, and allowing a second string parameter, and the use of
the pragma identifier `Check'. Historically, pragma `Precondition' was
implemented prior to the development of Ada 2012, and has been retained
in its original form for compatibility purposes.


File: gnat_rm.info,  Node: Pragma Predicate,  Next: Pragma Preelaborable_Initialization,  Prev: Pragma Precondition,  Up: Implementation Defined Pragmas

2.128 Pragma Predicate
======================

Syntax:

    pragma Predicate
      ([Entity =>] type_LOCAL_NAME,
       [Check  =>] EXPRESSION);

This pragma (available in all versions of Ada in GNAT) encompasses both
the `Static_Predicate' and `Dynamic_Predicate' aspects in Ada 2012. A
predicate is regarded as static if it has an allowed form for
`Static_Predicate' and is otherwise treated as a `Dynamic_Predicate'.
Otherwise, predicates specified by this pragma behave exactly as
described in the Ada 2012 reference manual.  For example, if we have

    type R is range 1 .. 10;
    subtype S is R;
    pragma Predicate (Entity => S, Check => S not in 4 .. 6);
    subtype Q is R
    pragma Predicate (Entity => Q, Check => F(Q) or G(Q));

the effect is identical to the following Ada 2012 code:

    type R is range 1 .. 10;
    subtype S is R with
      Static_Predicate => S not in 4 .. 6;
    subtype Q is R with
      Dynamic_Predicate => F(Q) or G(Q);

Note that there is are no pragmas `Dynamic_Predicate' or
`Static_Predicate'. That is because these pragmas would affect legality
and semantics of the program and thus do not have a neutral effect if
ignored.  The motivation behind providing pragmas equivalent to
corresponding aspects is to allow a program to be written using the
pragmas, and then compiled with a compiler that will ignore the
pragmas. That doesn't work in the case of static and dynamic
predicates, since if the corresponding pragmas are ignored, then the
behavior of the program is fundamentally changed (for example a
membership test `A in B' would not take into account a predicate
defined for subtype B). When following this approach, the use of
predicates should be avoided.


File: gnat_rm.info,  Node: Pragma Preelaborable_Initialization,  Next: Pragma Prefix_Exception_Messages,  Prev: Pragma Predicate,  Up: Implementation Defined Pragmas

2.129 Pragma Preelaborable_Initialization
=========================================

Syntax:

    pragma Preelaborable_Initialization (DIRECT_NAME);

This pragma is standard in Ada 2005, but is available in all earlier
versions of Ada as an implementation-defined pragma.  See Ada 2012
Reference Manual for details.


File: gnat_rm.info,  Node: Pragma Prefix_Exception_Messages,  Next: Pragma Pre_Class,  Prev: Pragma Preelaborable_Initialization,  Up: Implementation Defined Pragmas

2.130 Pragma Prefix_Exception_Messages
======================================

Syntax:

    pragma Prefix_Exception_Messages;

This is an implementation-defined configuration pragma that affects the
behavior of raise statements with a message given as a static string
constant (typically a string literal). In such cases, the string will
be automatically prefixed by the name of the enclosing entity (giving
the package and subprogram containing the raise statement). This helps
to identify where messages are coming from, and this mode is automatic
for the run-time library.

The pragma has no effect if the message is computed with an expression
other than a static string constant, since the assumption in this case
is that the program computes exactly the string it wants. If you still
want the prefixing in this case, you can always call
`GNAT.Source_Info.Enclosing_Entity' and prepend the string manually.


File: gnat_rm.info,  Node: Pragma Pre_Class,  Next: Pragma Priority_Specific_Dispatching,  Prev: Pragma Prefix_Exception_Messages,  Up: Implementation Defined Pragmas

2.131 Pragma Pre_Class
======================

Syntax:

    pragma Pre_Class (Boolean_Expression);

The `Pre_Class' pragma is intended to be an exact replacement for the
language-defined `Pre'Class' aspect, and shares its restrictions and
semantics.  It must appear either immediately following the
corresponding subprogram declaration (only other pragmas may
intervene), or if there is no separate subprogram declaration, then it
can appear at the start of the declarations in a subprogram body
(preceded only by other pragmas).

Note: This pragma is called `Pre_Class' rather than `Pre'Class' because
the latter would not be strictly conforming to the allowed syntax for
pragmas. The motivation for providing pragmas equivalent to the aspects
is to allow a program to be written using the pragmas, and then
compiled if necessary using an Ada compiler that does not recognize the
pragmas or aspects, but is prepared to ignore the pragmas. The assertion
policy that controls this pragma is `Pre'Class', not `Pre_Class'.


File: gnat_rm.info,  Node: Pragma Priority_Specific_Dispatching,  Next: Pragma Profile,  Prev: Pragma Pre_Class,  Up: Implementation Defined Pragmas

2.132 Pragma Priority_Specific_Dispatching
==========================================

Syntax:

    pragma Priority_Specific_Dispatching (
       POLICY_IDENTIFIER,
       first_priority_EXPRESSION,
       last_priority_EXPRESSION)

    POLICY_IDENTIFIER ::=
       EDF_Across_Priorities            |
       FIFO_Within_Priorities           |
       Non_Preemptive_Within_Priorities |
       Round_Robin_Within_Priorities

This pragma is standard in Ada 2005, but is available in all earlier
versions of Ada as an implementation-defined pragma.  See Ada 2012
Reference Manual for details.


File: gnat_rm.info,  Node: Pragma Profile,  Next: Pragma Profile_Warnings,  Prev: Pragma Priority_Specific_Dispatching,  Up: Implementation Defined Pragmas

2.133 Pragma Profile
====================

Syntax:

    pragma Profile (Ravenscar | Restricted | Rational);

This pragma is standard in Ada 2005, but is available in all earlier
versions of Ada as an implementation-defined pragma. This is a
configuration pragma that establishes a set of configuration pragmas
that depend on the argument. `Ravenscar' is standard in Ada 2005.  The
other two possibilities (`Restricted' or `Rational') are
implementation-defined. The set of configuration pragmas is defined in
the following sections.

   * Pragma Profile (Ravenscar)

     The `Ravenscar' profile is standard in Ada 2005, but is available
     in all earlier versions of Ada as an implementation-defined
     pragma. This profile establishes the following set of
     configuration pragmas:

        * `Task_Dispatching_Policy (FIFO_Within_Priorities)'

          [RM D.2.2] Tasks are dispatched following a preemptive
          priority-ordered scheduling policy.

        * `Locking_Policy (Ceiling_Locking)'

          [RM D.3] While tasks and interrupts execute a protected
          action, they inherit the ceiling priority of the
          corresponding protected object.

        * `Detect_Blocking'

          This pragma forces the detection of potentially blocking
          operations within a protected operation, and to raise
          Program_Error if that happens.

     plus the following set of restrictions:

        * `Max_Entry_Queue_Length => 1'

          No task can be queued on a protected entry.

        * `Max_Protected_Entries => 1'

        * `Max_Task_Entries => 0'

          No rendezvous statements are allowed.

        * `No_Abort_Statements'

        * `No_Dynamic_Attachment'

        * `No_Dynamic_Priorities'

        * `No_Implicit_Heap_Allocations'

        * `No_Local_Protected_Objects'

        * `No_Local_Timing_Events'

        * `No_Protected_Type_Allocators'

        * `No_Relative_Delay'

        * `No_Requeue_Statements'

        * `No_Select_Statements'

        * `No_Specific_Termination_Handlers'

        * `No_Task_Allocators'

        * `No_Task_Hierarchy'

        * `No_Task_Termination'

        * `Simple_Barriers'

     The Ravenscar profile also includes the following restrictions
     that specify that there are no semantic dependences on the
     corresponding predefined packages:

        * `No_Dependence => Ada.Asynchronous_Task_Control'

        * `No_Dependence => Ada.Calendar'

        * `No_Dependence => Ada.Execution_Time.Group_Budget'

        * `No_Dependence => Ada.Execution_Time.Timers'

        * `No_Dependence => Ada.Task_Attributes'

        * `No_Dependence => System.Multiprocessors.Dispatching_Domains'

     This set of configuration pragmas and restrictions correspond to
     the definition of the 'Ravenscar Profile' for limited tasking,
     devised and published by the `International Real-Time Ada
     Workshop, 1997'.  A description is also available at
     <http://www-users.cs.york.ac.uk/~burns/ravenscar.ps>.

     The original definition of the profile was revised at subsequent
     IRTAW meetings. It has been included in the ISO `Guide for the Use
     of the Ada Programming Language in High Integrity Systems', and
     was made part of the Ada 2005 standard.  The formal definition
     given by the Ada Rapporteur Group (ARG) can be found in two Ada
     Issues (AI-249 and AI-305) available at
     <http://www.ada-auth.org/cgi-bin/cvsweb.cgi/ais/ai-00249.txt> and
     <http://www.ada-auth.org/cgi-bin/cvsweb.cgi/ais/ai-00305.txt>.

     The above set is a superset of the restrictions provided by pragma
     `Profile (Restricted)', it includes six additional restrictions
     (`Simple_Barriers', `No_Select_Statements', `No_Calendar',
     `No_Implicit_Heap_Allocations', `No_Relative_Delay' and
     `No_Task_Termination').  This means that pragma `Profile
     (Ravenscar)', like the pragma `Profile (Restricted)',
     automatically causes the use of a simplified, more efficient
     version of the tasking run-time library.

   * Pragma Profile (Restricted)

     This profile corresponds to the GNAT restricted run time. It
     establishes the following set of restrictions:

        * `No_Abort_Statements'

        * `No_Entry_Queue'

        * `No_Task_Hierarchy'

        * `No_Task_Allocators'

        * `No_Dynamic_Priorities'

        * `No_Terminate_Alternatives'

        * `No_Dynamic_Attachment'

        * `No_Protected_Type_Allocators'

        * `No_Local_Protected_Objects'

        * `No_Requeue_Statements'

        * `No_Task_Attributes_Package'

        * `Max_Asynchronous_Select_Nesting =  0'

        * `Max_Task_Entries =  0'

        * `Max_Protected_Entries = 1'

        * `Max_Select_Alternatives = 0'

     This set of restrictions causes the automatic selection of a
     simplified version of the run time that provides improved
     performance for the limited set of tasking functionality permitted
     by this set of restrictions.

   * Pragma Profile (Rational)

     The Rational profile is intended to facilitate porting legacy code
     that compiles with the Rational APEX compiler, even when the code
     includes non- conforming Ada constructs.  The profile enables the
     following three pragmas:

        * `pragma Implicit_Packing'

        * `pragma Overriding_Renamings'

        * `pragma Use_VADS_Size'


File: gnat_rm.info,  Node: Pragma Profile_Warnings,  Next: Pragma Propagate_Exceptions,  Prev: Pragma Profile,  Up: Implementation Defined Pragmas

2.134 Pragma Profile_Warnings
=============================

Syntax:

    pragma Profile_Warnings (Ravenscar | Restricted | Rational);

This is an implementation-defined pragma that is similar in effect to
`pragma Profile' except that instead of generating `Restrictions'
pragmas, it generates `Restriction_Warnings' pragmas. The result is that
violations of the profile generate warning messages instead of error
messages.


File: gnat_rm.info,  Node: Pragma Propagate_Exceptions,  Next: Pragma Provide_Shift_Operators,  Prev: Pragma Profile_Warnings,  Up: Implementation Defined Pragmas

2.135 Pragma Propagate_Exceptions
=================================

Syntax:

    pragma Propagate_Exceptions;

This pragma is now obsolete and, other than generating a warning if
warnings on obsolescent features are enabled, is ignored.  It is
retained for compatibility purposes. It used to be used in connection
with optimization of a now-obsolete mechanism for implementation of
exceptions.


File: gnat_rm.info,  Node: Pragma Provide_Shift_Operators,  Next: Pragma Psect_Object,  Prev: Pragma Propagate_Exceptions,  Up: Implementation Defined Pragmas

2.136 Pragma Provide_Shift_Operators
====================================

Syntax:

    pragma Provide_Shift_Operators (integer_first_subtype_LOCAL_NAME);

This pragma can be applied to a first subtype local name that specifies
either an unsigned or signed type. It has the effect of providing the
five shift operators (Shift_Left, Shift_Right, Shift_Right_Arithmetic,
Rotate_Left and Rotate_Right) for the given type. It is similar to
including the function declarations for these five operators, together
with the pragma Import (Intrinsic, ...) statements.


File: gnat_rm.info,  Node: Pragma Psect_Object,  Next: Pragma Pure_Function,  Prev: Pragma Provide_Shift_Operators,  Up: Implementation Defined Pragmas

2.137 Pragma Psect_Object
=========================

Syntax:

    pragma Psect_Object (
         [Internal =>] LOCAL_NAME,
      [, [External =>] EXTERNAL_SYMBOL]
      [, [Size     =>] EXTERNAL_SYMBOL]);

    EXTERNAL_SYMBOL ::=
      IDENTIFIER
    | static_string_EXPRESSION

This pragma is identical in effect to pragma `Common_Object'.


File: gnat_rm.info,  Node: Pragma Pure_Function,  Next: Pragma Rational,  Prev: Pragma Psect_Object,  Up: Implementation Defined Pragmas

2.138 Pragma Pure_Function
==========================

Syntax:

    pragma Pure_Function ([Entity =>] function_LOCAL_NAME);

This pragma appears in the same declarative part as a function
declaration (or a set of function declarations if more than one
overloaded declaration exists, in which case the pragma applies to all
entities).  It specifies that the function `Entity' is to be considered
pure for the purposes of code generation.  This means that the compiler
can assume that there are no side effects, and in particular that two
calls with identical arguments produce the same result.  It also means
that the function can be used in an address clause.

Note that, quite deliberately, there are no static checks to try to
ensure that this promise is met, so `Pure_Function' can be used with
functions that are conceptually pure, even if they do modify global
variables.  For example, a square root function that is instrumented to
count the number of times it is called is still conceptually pure, and
can still be optimized, even though it modifies a global variable (the
count).  Memo functions are another example (where a table of previous
calls is kept and consulted to avoid re-computation).

Note also that the normal rules excluding optimization of subprograms
in pure units (when parameter types are descended from System.Address,
or when the full view of a parameter type is limited), do not apply for
the Pure_Function case. If you explicitly specify Pure_Function, the
compiler may optimize away calls with identical arguments, and if that
results in unexpected behavior, the proper action is not to use the
pragma for subprograms that are not (conceptually) pure.

Note: Most functions in a `Pure' package are automatically pure, and
there is no need to use pragma `Pure_Function' for such functions.  One
exception is any function that has at least one formal of type
`System.Address' or a type derived from it.  Such functions are not
considered pure by default, since the compiler assumes that the
`Address' parameter may be functioning as a pointer and that the
referenced data may change even if the address value does not.
Similarly, imported functions are not considered to be pure by default,
since there is no way of checking that they are in fact pure.  The use
of pragma `Pure_Function' for such a function will override these
default assumption, and cause the compiler to treat a designated
subprogram as pure in these cases.

Note: If pragma `Pure_Function' is applied to a renamed function, it
applies to the underlying renamed function.  This can be used to
disambiguate cases of overloading where some but not all functions in a
set of overloaded functions are to be designated as pure.

If pragma `Pure_Function' is applied to a library level function, the
function is also considered pure from an optimization point of view,
but the unit is not a Pure unit in the categorization sense. So for
example, a function thus marked is free to `with' non-pure units.


File: gnat_rm.info,  Node: Pragma Rational,  Next: Pragma Ravenscar,  Prev: Pragma Pure_Function,  Up: Implementation Defined Pragmas

2.139 Pragma Rational
=====================

Syntax:

    pragma Rational;

This pragma is considered obsolescent, but is retained for
compatibility purposes. It is equivalent to:

    pragma Profile (Rational);


File: gnat_rm.info,  Node: Pragma Ravenscar,  Next: Pragma Refined_Depends,  Prev: Pragma Rational,  Up: Implementation Defined Pragmas

2.140 Pragma Ravenscar
======================

Syntax:

    pragma Ravenscar;

This pragma is considered obsolescent, but is retained for
compatibility purposes. It is equivalent to:

    pragma Profile (Ravenscar);

which is the preferred method of setting the `Ravenscar' profile.


File: gnat_rm.info,  Node: Pragma Refined_Depends,  Next: Pragma Refined_Global,  Prev: Pragma Ravenscar,  Up: Implementation Defined Pragmas

2.141 Pragma Refined_Depends
============================

For the description of this pragma, see SPARK 2014 Reference Manual,
section 6.1.5.


File: gnat_rm.info,  Node: Pragma Refined_Global,  Next: Pragma Refined_Post,  Prev: Pragma Refined_Depends,  Up: Implementation Defined Pragmas

2.142 Pragma Refined_Global
===========================

For the description of this pragma, see SPARK 2014 Reference Manual,
section 6.1.4.


File: gnat_rm.info,  Node: Pragma Refined_Post,  Next: Pragma Refined_State,  Prev: Pragma Refined_Global,  Up: Implementation Defined Pragmas

2.143 Pragma Refined_Post
=========================

For the description of this pragma, see SPARK 2014 Reference Manual,
section 7.2.7.


File: gnat_rm.info,  Node: Pragma Refined_State,  Next: Pragma Relative_Deadline,  Prev: Pragma Refined_Post,  Up: Implementation Defined Pragmas

2.144 Pragma Refined_State
==========================

For the description of this pragma, see SPARK 2014 Reference Manual,
section 7.2.2.


File: gnat_rm.info,  Node: Pragma Relative_Deadline,  Next: Pragma Remote_Access_Type,  Prev: Pragma Refined_State,  Up: Implementation Defined Pragmas

2.145 Pragma Relative_Deadline
==============================

Syntax:

    pragma Relative_Deadline (time_span_EXPRESSION);

This pragma is standard in Ada 2005, but is available in all earlier
versions of Ada as an implementation-defined pragma.  See Ada 2012
Reference Manual for details.


File: gnat_rm.info,  Node: Pragma Remote_Access_Type,  Next: Pragma Restricted_Run_Time,  Prev: Pragma Relative_Deadline,  Up: Implementation Defined Pragmas

2.146 Pragma Remote_Access_Type
===============================

Syntax:

    pragma Remote_Access_Type ([Entity =>] formal_access_type_LOCAL_NAME);

This pragma appears in the formal part of a generic declaration.  It
specifies an exception to the RM rule from E.2.2(17/2), which forbids
the use of a remote access to class-wide type as actual for a formal
access type.

When this pragma applies to a formal access type `Entity', that type is
treated as a remote access to class-wide type in the generic.  It must
be a formal general access type, and its designated type must be the
class-wide type of a formal tagged limited private type from the same
generic declaration.

In the generic unit, the formal type is subject to all restrictions
pertaining to remote access to class-wide types. At instantiation, the
actual type must be a remote access to class-wide type.


File: gnat_rm.info,  Node: Pragma Restricted_Run_Time,  Next: Pragma Restriction_Warnings,  Prev: Pragma Remote_Access_Type,  Up: Implementation Defined Pragmas

2.147 Pragma Restricted_Run_Time
================================

Syntax:

    pragma Restricted_Run_Time;

This pragma is considered obsolescent, but is retained for
compatibility purposes. It is equivalent to:

    pragma Profile (Restricted);

which is the preferred method of setting the restricted run time
profile.


File: gnat_rm.info,  Node: Pragma Restriction_Warnings,  Next: Pragma Reviewable,  Prev: Pragma Restricted_Run_Time,  Up: Implementation Defined Pragmas

2.148 Pragma Restriction_Warnings
=================================

Syntax:

    pragma Restriction_Warnings
      (restriction_IDENTIFIER {, restriction_IDENTIFIER});

This pragma allows a series of restriction identifiers to be specified
(the list of allowed identifiers is the same as for pragma
`Restrictions'). For each of these identifiers the compiler checks for
violations of the restriction, but generates a warning message rather
than an error message if the restriction is violated.

One use of this is in situations where you want to know about
violations of a restriction, but you want to ignore some of these
violations. Consider this example, where you want to set Ada_95 mode
and enable style checks, but you want to know about any other use of
implementation pragmas:

    pragma Restriction_Warnings (No_Implementation_Pragmas);
    pragma Warnings (Off, "violation of No_Implementation_Pragmas");
    pragma Ada_95;
    pragma Style_Checks ("2bfhkM160");
    pragma Warnings (On, "violation of No_Implementation_Pragmas");

By including the above lines in a configuration pragmas file, the
Ada_95 and Style_Checks pragmas are accepted without generating a
warning, but any other use of implementation defined pragmas will cause
a warning to be generated.


File: gnat_rm.info,  Node: Pragma Reviewable,  Next: Pragma Share_Generic,  Prev: Pragma Restriction_Warnings,  Up: Implementation Defined Pragmas

2.149 Pragma Reviewable
=======================

Syntax:

    pragma Reviewable;

This pragma is an RM-defined standard pragma, but has no effect on the
program being compiled, or on the code generated for the program.

To obtain the required output specified in RM H.3.1, the compiler must
be run with various special switches as follows:

   * `Where compiler-generated run-time checks remain'

     The switch `-gnatGL' may be used to list the expanded code in
     pseudo-Ada form.  Runtime checks show up in the listing either as
     explicit checks or operators marked with {} to indicate a check is
     present.

   * `An identification of known exceptions at compile time'

     If the program is compiled with `-gnatwa', the compiler warning
     messages will indicate all cases where the compiler detects that
     an exception is certain to occur at run time.

   * `Possible reads of uninitialized variables'

     The compiler warns of many such cases, but its output is
     incomplete.

A supplemental static analysis tool may be used to obtain a
comprehensive list of all possible points at which uninitialized data
may be read.

   * `Where run-time support routines are implicitly invoked'

     In the output from `-gnatGL', run-time calls are explicitly listed
     as calls to the relevant run-time routine.

   * `Object code listing'

     This may be obtained either by using the `-S' switch, or the
     objdump utility.

   * `Constructs known to be erroneous at compile time'

     These are identified by warnings issued by the compiler (use
     `-gnatwa').

   * `Stack usage information'

     Static stack usage data (maximum per-subprogram) can be obtained
     via the `-fstack-usage' switch to the compiler.  Dynamic stack
     usage data (per task) can be obtained via the `-u' switch to
     gnatbind

   * `Object code listing of entire partition'

     This can be obtained by compiling the partition with `-S', or by
     applying objdump to all the object files that are part of the
     partition.

   * `A description of the run-time model'

     The full sources of the run-time are available, and the
     documentation of these routines describes how these run-time
     routines interface to the underlying operating system facilities.

   * `Control and data-flow information'

A supplemental static analysis tool may be used to obtain complete
control and data-flow information, as well as comprehensive messages
identifying possible problems based on this information.


File: gnat_rm.info,  Node: Pragma Share_Generic,  Next: Pragma Shared,  Prev: Pragma Reviewable,  Up: Implementation Defined Pragmas

2.150 Pragma Share_Generic
==========================

Syntax:

    pragma Share_Generic (GNAME {, GNAME});

    GNAME ::= generic_unit_NAME | generic_instance_NAME

This pragma is provided for compatibility with Dec Ada 83. It has no
effect in `GNAT' (which does not implement shared generics), other than
to check that the given names are all names of generic units or generic
instances.


File: gnat_rm.info,  Node: Pragma Shared,  Next: Pragma Short_Circuit_And_Or,  Prev: Pragma Share_Generic,  Up: Implementation Defined Pragmas

2.151 Pragma Shared
===================

This pragma is provided for compatibility with Ada 83. The syntax and
semantics are identical to pragma Atomic.


File: gnat_rm.info,  Node: Pragma Short_Circuit_And_Or,  Next: Pragma Short_Descriptors,  Prev: Pragma Shared,  Up: Implementation Defined Pragmas

2.152 Pragma Short_Circuit_And_Or
=================================

Syntax:

    pragma Short_Circuit_And_Or;

This configuration pragma causes any occurrence of the AND operator
applied to operands of type Standard.Boolean to be short-circuited
(i.e. the AND operator is treated as if it were AND THEN). Or is
similarly treated as OR ELSE. This may be useful in the context of
certification protocols requiring the use of short-circuited logical
operators. If this configuration pragma occurs locally within the file
being compiled, it applies only to the file being compiled.  There is
no requirement that all units in a partition use this option.


File: gnat_rm.info,  Node: Pragma Short_Descriptors,  Next: Pragma Simple_Storage_Pool_Type,  Prev: Pragma Short_Circuit_And_Or,  Up: Implementation Defined Pragmas

2.153 Pragma Short_Descriptors
==============================

Syntax:

    pragma Short_Descriptors

This pragma is provided for compatibility with other Ada
implementations. It is recognized but ignored by all current versions
of GNAT.


File: gnat_rm.info,  Node: Pragma Simple_Storage_Pool_Type,  Next: Pragma Source_File_Name,  Prev: Pragma Short_Descriptors,  Up: Implementation Defined Pragmas

2.154 Pragma Simple_Storage_Pool_Type
=====================================

Syntax:

    pragma Simple_Storage_Pool_Type (type_LOCAL_NAME);

A type can be established as a 'simple storage pool type' by applying
the representation pragma `Simple_Storage_Pool_Type' to the type.  A
type named in the pragma must be a library-level immutably limited
record type or limited tagged type declared immediately within a
package declaration.  The type can also be a limited private type whose
full type is allowed as a simple storage pool type.

For a simple storage pool type `SSP', nonabstract primitive subprograms
`Allocate', `Deallocate', and `Storage_Size' can be declared that are
subtype conformant with the following subprogram declarations:

    procedure Allocate
      (Pool                     : in out SSP;
       Storage_Address          : out System.Address;
       Size_In_Storage_Elements : System.Storage_Elements.Storage_Count;
       Alignment                : System.Storage_Elements.Storage_Count);

    procedure Deallocate
      (Pool : in out SSP;
       Storage_Address          : System.Address;
       Size_In_Storage_Elements : System.Storage_Elements.Storage_Count;
       Alignment                : System.Storage_Elements.Storage_Count);

    function Storage_Size (Pool : SSP)
      return System.Storage_Elements.Storage_Count;

Procedure `Allocate' must be declared, whereas `Deallocate' and
`Storage_Size' are optional. If `Deallocate' is not declared, then
applying an unchecked deallocation has no effect other than to set its
actual parameter to null. If `Storage_Size' is not declared, then the
`Storage_Size' attribute applied to an access type associated with a
pool object of type SSP returns zero. Additional operations can be
declared for a simple storage pool type (such as for supporting a
mark/release storage-management discipline).

An object of a simple storage pool type can be associated with an access
type by specifying the attribute *Note Simple_Storage_Pool: b7. For
example:

    My_Pool : My_Simple_Storage_Pool_Type;

    type Acc is access My_Data_Type;

    for Acc'Simple_Storage_Pool use My_Pool;

See attribute *Note Simple_Storage_Pool: b7.  for further details.


File: gnat_rm.info,  Node: Pragma Source_File_Name,  Next: Pragma Source_File_Name_Project,  Prev: Pragma Simple_Storage_Pool_Type,  Up: Implementation Defined Pragmas

2.155 Pragma Source_File_Name
=============================

Syntax:

    pragma Source_File_Name (
      [Unit_Name   =>] unit_NAME,
      Spec_File_Name =>  STRING_LITERAL,
      [Index => INTEGER_LITERAL]);

    pragma Source_File_Name (
      [Unit_Name   =>] unit_NAME,
      Body_File_Name =>  STRING_LITERAL,
      [Index => INTEGER_LITERAL]);

Use this to override the normal naming convention.  It is a
configuration pragma, and so has the usual applicability of
configuration pragmas (i.e., it applies to either an entire partition,
or to all units in a compilation, or to a single unit, depending on how
it is used.  `unit_name' is mapped to `file_name_literal'.  The
identifier for the second argument is required, and indicates whether
this is the file name for the spec or for the body.

The optional Index argument should be used when a file contains multiple
units, and when you do not want to use `gnatchop' to separate then into
multiple files (which is the recommended procedure to limit the number
of recompilations that are needed when some sources change).  For
instance, if the source file `source.ada' contains

    package B is
    ...
    end B;

    with B;
    procedure A is
    begin
       ..
    end A;

you could use the following configuration pragmas:

    pragma Source_File_Name
      (B, Spec_File_Name => "source.ada", Index => 1);
    pragma Source_File_Name
      (A, Body_File_Name => "source.ada", Index => 2);

Note that the `gnatname' utility can also be used to generate those
configuration pragmas.

Another form of the `Source_File_Name' pragma allows the specification
of patterns defining alternative file naming schemes to apply to all
files.

    pragma Source_File_Name
      (  [Spec_File_Name  =>] STRING_LITERAL
       [,[Casing          =>] CASING_SPEC]
       [,[Dot_Replacement =>] STRING_LITERAL]);

    pragma Source_File_Name
      (  [Body_File_Name  =>] STRING_LITERAL
       [,[Casing          =>] CASING_SPEC]
       [,[Dot_Replacement =>] STRING_LITERAL]);

    pragma Source_File_Name
      (  [Subunit_File_Name =>] STRING_LITERAL
       [,[Casing            =>] CASING_SPEC]
       [,[Dot_Replacement   =>] STRING_LITERAL]);

    CASING_SPEC ::= Lowercase | Uppercase | Mixedcase

The first argument is a pattern that contains a single asterisk
indicating the point at which the unit name is to be inserted in the
pattern string to form the file name.  The second argument is optional.
If present it specifies the casing of the unit name in the resulting
file name string.  The default is lower case.  Finally the third
argument allows for systematic replacement of any dots in the unit name
by the specified string literal.

Note that Source_File_Name pragmas should not be used if you are using
project files. The reason for this rule is that the project manager is
not aware of these pragmas, and so other tools that use the projet file
would not be aware of the intended naming conventions. If you are using
project files, file naming is controlled by Source_File_Name_Project
pragmas, which are usually supplied automatically by the project
manager. A pragma Source_File_Name cannot appear after a *Note Pragma
Source_File_Name_Project: ba.

For more details on the use of the `Source_File_Name' pragma, see the
sections on `Using Other File Names' and `Alternative File Naming
Schemes' in the :title:`GNAT User's Guide'.


File: gnat_rm.info,  Node: Pragma Source_File_Name_Project,  Next: Pragma Source_Reference,  Prev: Pragma Source_File_Name,  Up: Implementation Defined Pragmas

2.156 Pragma Source_File_Name_Project
=====================================

This pragma has the same syntax and semantics as pragma
Source_File_Name.  It is only allowed as a stand alone configuration
pragma.  It cannot appear after a *Note Pragma Source_File_Name: b8, and
most importantly, once pragma Source_File_Name_Project appears, no
further Source_File_Name pragmas are allowed.

The intention is that Source_File_Name_Project pragmas are always
generated by the Project Manager in a manner consistent with the naming
specified in a project file, and when naming is controlled in this
manner, it is not permissible to attempt to modify this naming scheme
using Source_File_Name or Source_File_Name_Project pragmas (which would
not be known to the project manager).


File: gnat_rm.info,  Node: Pragma Source_Reference,  Next: Pragma SPARK_Mode,  Prev: Pragma Source_File_Name_Project,  Up: Implementation Defined Pragmas

2.157 Pragma Source_Reference
=============================

Syntax:

    pragma Source_Reference (INTEGER_LITERAL, STRING_LITERAL);

This pragma must appear as the first line of a source file.
`integer_literal' is the logical line number of the line following the
pragma line (for use in error messages and debugging information).
`string_literal' is a static string constant that specifies the file
name to be used in error messages and debugging information.  This is
most notably used for the output of `gnatchop' with the `-r' switch, to
make sure that the original unchopped source file is the one referred
to.

The second argument must be a string literal, it cannot be a static
string expression other than a string literal.  This is because its
value is needed for error messages issued by all phases of the compiler.


File: gnat_rm.info,  Node: Pragma SPARK_Mode,  Next: Pragma Static_Elaboration_Desired,  Prev: Pragma Source_Reference,  Up: Implementation Defined Pragmas

2.158 Pragma SPARK_Mode
=======================

Syntax:

    pragma SPARK_Mode [(On | Off)] ;

In general a program can have some parts that are in SPARK 2014 (and
follow all the rules in the SPARK Reference Manual), and some parts
that are full Ada 2012.

The SPARK_Mode pragma is used to identify which parts are in SPARK 2014
(by default programs are in full Ada). The SPARK_Mode pragma can be
used in the following places:

   * As a configuration pragma, in which case it sets the default mode
     for all units compiled with this pragma.

   * Immediately following a library-level subprogram spec

   * Immediately within a library-level package body

   * Immediately following the `private' keyword of a library-level
     package spec

   * Immediately following the `begin' keyword of a library-level
     package body

   * Immediately within a library-level subprogram body

Normally a subprogram or package spec/body inherits the current mode
that is active at the point it is declared. But this can be overridden
by pragma within the spec or body as above.

The basic consistency rule is that you can't turn SPARK_Mode back `On',
once you have explicitly (with a pragma) turned if `Off'. So the
following rules apply:

If a subprogram spec has SPARK_Mode `Off', then the body must also have
SPARK_Mode `Off'.

For a package, we have four parts:

   * the package public declarations

   * the package private part

   * the body of the package

   * the elaboration code after `begin'

For a package, the rule is that if you explicitly turn SPARK_Mode `Off'
for any part, then all the following parts must have SPARK_Mode `Off'.
Note that this may require repeating a pragma SPARK_Mode (`Off') in the
body. For example, if we have a configuration pragma SPARK_Mode (`On')
that turns the mode on by default everywhere, and one particular
package spec has pragma SPARK_Mode (`Off'), then that pragma will need
to be repeated in the package body.


File: gnat_rm.info,  Node: Pragma Static_Elaboration_Desired,  Next: Pragma Stream_Convert,  Prev: Pragma SPARK_Mode,  Up: Implementation Defined Pragmas

2.159 Pragma Static_Elaboration_Desired
=======================================

Syntax:

    pragma Static_Elaboration_Desired;

This pragma is used to indicate that the compiler should attempt to
initialize statically the objects declared in the library unit to which
the pragma applies, when these objects are initialized (explicitly or
implicitly) by an aggregate.  In the absence of this pragma, aggregates
in object declarations are expanded into assignments and loops, even
when the aggregate components are static constants. When the aggregate
is present the compiler builds a static expression that requires no
run-time code, so that the initialized object can be placed in
read-only data space. If the components are not static, or the
aggregate has more that 100 components, the compiler emits a warning
that the pragma cannot be obeyed. (See also the restriction
No_Implicit_Loops, which supports static construction of larger
aggregates with static components that include an others choice.)


File: gnat_rm.info,  Node: Pragma Stream_Convert,  Next: Pragma Style_Checks,  Prev: Pragma Static_Elaboration_Desired,  Up: Implementation Defined Pragmas

2.160 Pragma Stream_Convert
===========================

Syntax:

    pragma Stream_Convert (
      [Entity =>] type_LOCAL_NAME,
      [Read   =>] function_NAME,
      [Write  =>] function_NAME);

This pragma provides an efficient way of providing user-defined stream
attributes.  Not only is it simpler to use than specifying the
attributes directly, but more importantly, it allows the specification
to be made in such a way that the predefined unit Ada.Streams is not
loaded unless it is actually needed (i.e. unless the stream attributes
are actually used); the use of the Stream_Convert pragma adds no
overhead at all, unless the stream attributes are actually used on the
designated type.

The first argument specifies the type for which stream functions are
provided.  The second parameter provides a function used to read values
of this type.  It must name a function whose argument type may be any
subtype, and whose returned type must be the type given as the first
argument to the pragma.

The meaning of the `Read' parameter is that if a stream attribute
directly or indirectly specifies reading of the type given as the first
parameter, then a value of the type given as the argument to the Read
function is read from the stream, and then the Read function is used to
convert this to the required target type.

Similarly the `Write' parameter specifies how to treat write attributes
that directly or indirectly apply to the type given as the first
parameter.  It must have an input parameter of the type specified by
the first parameter, and the return type must be the same as the input
type of the Read function.  The effect is to first call the Write
function to convert to the given stream type, and then write the result
type to the stream.

The Read and Write functions must not be overloaded subprograms.  If
necessary renamings can be supplied to meet this requirement.  The
usage of this attribute is best illustrated by a simple example, taken
from the GNAT implementation of package Ada.Strings.Unbounded:

    function To_Unbounded (S : String) return Unbounded_String
      renames To_Unbounded_String;

    pragma Stream_Convert
      (Unbounded_String, To_Unbounded, To_String);

The specifications of the referenced functions, as given in the Ada
Reference Manual are:

    function To_Unbounded_String (Source : String)
      return Unbounded_String;

    function To_String (Source : Unbounded_String)
      return String;

The effect is that if the value of an unbounded string is written to a
stream, then the representation of the item in the stream is in the
same format that would be used for `Standard.String'Output', and this
same representation is expected when a value of this type is read from
the stream. Note that the value written always includes the bounds,
even for Unbounded_String'Write, since Unbounded_String is not an array
type.

Note that the `Stream_Convert' pragma is not effective in the case of a
derived type of a non-limited tagged type. If such a type is specified
then the pragma is silently ignored, and the default implementation of
the stream attributes is used instead.


File: gnat_rm.info,  Node: Pragma Style_Checks,  Next: Pragma Subtitle,  Prev: Pragma Stream_Convert,  Up: Implementation Defined Pragmas

2.161 Pragma Style_Checks
=========================

Syntax:

    pragma Style_Checks (string_LITERAL | ALL_CHECKS |
                         On | Off [, LOCAL_NAME]);

This pragma is used in conjunction with compiler switches to control the
built in style checking provided by GNAT.  The compiler switches, if
set, provide an initial setting for the switches, and this pragma may
be used to modify these settings, or the settings may be provided
entirely by the use of the pragma.  This pragma can be used anywhere
that a pragma is legal, including use as a configuration pragma
(including use in the `gnat.adc' file).

The form with a string literal specifies which style options are to be
activated.  These are additive, so they apply in addition to any
previously set style check options.  The codes for the options are the
same as those used in the `-gnaty' switch to `gcc' or `gnatmake'.  For
example the following two methods can be used to enable layout checking:

   *     pragma Style_Checks ("l");

   *     gcc -c -gnatyl ...

The form ALL_CHECKS activates all standard checks (its use is equivalent
to the use of the `gnaty' switch with no options.  See the `GNAT User's
Guide' for details.)

Note: the behavior is slightly different in GNAT mode (`-gnatg' used).
In this case, ALL_CHECKS implies the standard set of GNAT mode style
check options (i.e. equivalent to `-gnatyg').

The forms with `Off' and `On' can be used to temporarily disable style
checks as shown in the following example:

    pragma Style_Checks ("k"); -- requires keywords in lower case
    pragma Style_Checks (Off); -- turn off style checks
    NULL;                      -- this will not generate an error message
    pragma Style_Checks (On);  -- turn style checks back on
    NULL;                      -- this will generate an error message

Finally the two argument form is allowed only if the first argument is
`On' or `Off'.  The effect is to turn of semantic style checks for the
specified entity, as shown in the following example:

    pragma Style_Checks ("r"); -- require consistency of identifier casing
    Arg : Integer;
    Rf1 : Integer := ARG;      -- incorrect, wrong case
    pragma Style_Checks (Off, Arg);
    Rf2 : Integer := ARG;      -- OK, no error


File: gnat_rm.info,  Node: Pragma Subtitle,  Next: Pragma Suppress,  Prev: Pragma Style_Checks,  Up: Implementation Defined Pragmas

2.162 Pragma Subtitle
=====================

Syntax:

    pragma Subtitle ([Subtitle =>] STRING_LITERAL);

This pragma is recognized for compatibility with other Ada compilers
but is ignored by GNAT.


File: gnat_rm.info,  Node: Pragma Suppress,  Next: Pragma Suppress_All,  Prev: Pragma Subtitle,  Up: Implementation Defined Pragmas

2.163 Pragma Suppress
=====================

Syntax:

    pragma Suppress (Identifier [, [On =>] Name]);

This is a standard pragma, and supports all the check names required in
the RM. It is included here because GNAT recognizes some additional
check names that are implementation defined (as permitted by the RM):

   * `Alignment_Check' can be used to suppress alignment checks on
     addresses used in address clauses. Such checks can also be
     suppressed by suppressing range checks, but the specific use of
     `Alignment_Check' allows suppression of alignment checks without
     suppressing other range checks.  Note that `Alignment_Check' is
     suppressed by default on machines (such as the x86) with
     non-strict alignment.

   * `Atomic_Synchronization' can be used to suppress the special memory
     synchronization instructions that are normally generated for
     access to `Atomic' variables to ensure correct synchronization
     between tasks that use such variables for synchronization purposes.

   * `Duplicated_Tag_Check' Can be used to suppress the check that is
     generated for a duplicated tag value when a tagged type is
     declared.

   * `Predicate_Check' can be used to control whether predicate checks
     are active. It is applicable only to predicates for which the
     policy is `Check'. Unlike `Assertion_Policy', which determines if
     a given predicate is ignored or checked for the whole program, the
     use of `Suppress' and `Unsuppress' with this check name allows a
     given predicate to be turned on and off at specific points in the
     program.

   * `Validity_Check' can be used specifically to control validity
     checks.  If `Suppress' is used to suppress validity checks, then
     no validity checks are performed, including those specified by the
     appropriate compiler switch or the `Validity_Checks' pragma.

   * Additional check names previously introduced by use of the
     `Check_Name' pragma are also allowed.

Note that pragma Suppress gives the compiler permission to omit checks,
but does not require the compiler to omit checks. The compiler will
generate checks if they are essentially free, even when they are
suppressed. In particular, if the compiler can prove that a certain
check will necessarily fail, it will generate code to do an
unconditional 'raise', even if checks are suppressed. The compiler
warns in this case.

Of course, run-time checks are omitted whenever the compiler can prove
that they will not fail, whether or not checks are suppressed.


File: gnat_rm.info,  Node: Pragma Suppress_All,  Next: Pragma Suppress_Debug_Info,  Prev: Pragma Suppress,  Up: Implementation Defined Pragmas

2.164 Pragma Suppress_All
=========================

Syntax:

    pragma Suppress_All;

This pragma can appear anywhere within a unit.  The effect is to apply
`Suppress (All_Checks)' to the unit in which it appears.  This pragma
is implemented for compatibility with DEC Ada 83 usage where it appears
at the end of a unit, and for compatibility with Rational Ada, where it
appears as a program unit pragma.  The use of the standard Ada pragma
`Suppress (All_Checks)' as a normal configuration pragma is the
preferred usage in GNAT.


File: gnat_rm.info,  Node: Pragma Suppress_Debug_Info,  Next: Pragma Suppress_Exception_Locations,  Prev: Pragma Suppress_All,  Up: Implementation Defined Pragmas

2.165 Pragma Suppress_Debug_Info
================================

Syntax:

    pragma Suppress_Debug_Info ([Entity =>] LOCAL_NAME);

This pragma can be used to suppress generation of debug information for
the specified entity. It is intended primarily for use in debugging the
debugger, and navigating around debugger problems.


File: gnat_rm.info,  Node: Pragma Suppress_Exception_Locations,  Next: Pragma Suppress_Initialization,  Prev: Pragma Suppress_Debug_Info,  Up: Implementation Defined Pragmas

2.166 Pragma Suppress_Exception_Locations
=========================================

Syntax:

    pragma Suppress_Exception_Locations;

In normal mode, a raise statement for an exception by default generates
an exception message giving the file name and line number for the
location of the raise. This is useful for debugging and logging
purposes, but this entails extra space for the strings for the
messages. The configuration pragma `Suppress_Exception_Locations' can
be used to suppress the generation of these strings, with the result
that space is saved, but the exception message for such raises is null.
This configuration pragma may appear in a global configuration pragma
file, or in a specific unit as usual. It is not required that this
pragma be used consistently within a partition, so it is fine to have
some units within a partition compiled with this pragma and others
compiled in normal mode without it.


File: gnat_rm.info,  Node: Pragma Suppress_Initialization,  Next: Pragma Task_Name,  Prev: Pragma Suppress_Exception_Locations,  Up: Implementation Defined Pragmas

2.167 Pragma Suppress_Initialization
====================================

Syntax:

    pragma Suppress_Initialization ([Entity =>] variable_or_subtype_Name);

Here variable_or_subtype_Name is the name introduced by a type
declaration or subtype declaration or the name of a variable introduced
by an object declaration.

In the case of a type or subtype this pragma suppresses any implicit or
explicit initialization for all variables of the given type or subtype,
including initialization resulting from the use of pragmas
Normalize_Scalars or Initialize_Scalars.

This is considered a representation item, so it cannot be given after
the type is frozen. It applies to all subsequent object declarations,
and also any allocator that creates objects of the type.

If the pragma is given for the first subtype, then it is considered to
apply to the base type and all its subtypes. If the pragma is given for
other than a first subtype, then it applies only to the given subtype.
The pragma may not be given after the type is frozen.

Note that this includes eliminating initialization of discriminants for
discriminated types, and tags for tagged types. In these cases, you
will have to use some non-portable mechanism (e.g. address overlays or
unchecked conversion) to achieve required initialization of these
fields before accessing any object of the corresponding type.

For the variable case, implicit initialization for the named variable
is suppressed, just as though its subtype had been given in a pragma
Suppress_Initialization, as described above.


File: gnat_rm.info,  Node: Pragma Task_Name,  Next: Pragma Task_Storage,  Prev: Pragma Suppress_Initialization,  Up: Implementation Defined Pragmas

2.168 Pragma Task_Name
======================

Syntax

    pragma Task_Name (string_EXPRESSION);

This pragma appears within a task definition (like pragma `Priority')
and applies to the task in which it appears.  The argument must be of
type String, and provides a name to be used for the task instance when
the task is created.  Note that this expression is not required to be
static, and in particular, it can contain references to task
discriminants.  This facility can be used to provide different names
for different tasks as they are created, as illustrated in the example
below.

The task name is recorded internally in the run-time structures and is
accessible to tools like the debugger.  In addition the routine
`Ada.Task_Identification.Image' will return this string, with a unique
task address appended.

    --  Example of the use of pragma Task_Name

    with Ada.Task_Identification;
    use Ada.Task_Identification;
    with Text_IO; use Text_IO;
    procedure t3 is

       type Astring is access String;

       task type Task_Typ (Name : access String) is
          pragma Task_Name (Name.all);
       end Task_Typ;

       task body Task_Typ is
          Nam : constant String := Image (Current_Task);
       begin
          Put_Line ("-->" & Nam (1 .. 14) & "<--");
       end Task_Typ;

       type Ptr_Task is access Task_Typ;
       Task_Var : Ptr_Task;

    begin
       Task_Var :=
         new Task_Typ (new String'("This is task 1"));
       Task_Var :=
         new Task_Typ (new String'("This is task 2"));
    end;


File: gnat_rm.info,  Node: Pragma Task_Storage,  Next: Pragma Test_Case,  Prev: Pragma Task_Name,  Up: Implementation Defined Pragmas

2.169 Pragma Task_Storage
=========================

Syntax:

    pragma Task_Storage (
      [Task_Type =>] LOCAL_NAME,
      [Top_Guard =>] static_integer_EXPRESSION);

This pragma specifies the length of the guard area for tasks.  The guard
area is an additional storage area allocated to a task.  A value of zero
means that either no guard area is created or a minimal guard area is
created, depending on the target.  This pragma can appear anywhere a
`Storage_Size' attribute definition clause is allowed for a task type.


File: gnat_rm.info,  Node: Pragma Test_Case,  Next: Pragma Thread_Local_Storage,  Prev: Pragma Task_Storage,  Up: Implementation Defined Pragmas

2.170 Pragma Test_Case
======================

Syntax:

    pragma Test_Case (
       [Name     =>] static_string_Expression
      ,[Mode     =>] (Nominal | Robustness)
     [, Requires =>  Boolean_Expression]
     [, Ensures  =>  Boolean_Expression]);

The `Test_Case' pragma allows defining fine-grain specifications for
use by testing tools.  The compiler checks the validity of the
`Test_Case' pragma, but its presence does not lead to any modification
of the code generated by the compiler.

`Test_Case' pragmas may only appear immediately following the
(separate) declaration of a subprogram in a package declaration, inside
a package spec unit. Only other pragmas may intervene (that is appear
between the subprogram declaration and a test case).

The compiler checks that boolean expressions given in `Requires' and
`Ensures' are valid, where the rules for `Requires' are the same as the
rule for an expression in `Precondition' and the rules for `Ensures'
are the same as the rule for an expression in `Postcondition'. In
particular, attributes `'Old' and `'Result' can only be used within the
`Ensures' expression. The following is an example of use within a
package spec:

    package Math_Functions is
       ...
       function Sqrt (Arg : Float) return Float;
       pragma Test_Case (Name     => "Test 1",
                         Mode     => Nominal,
                         Requires => Arg < 10000,
                         Ensures  => Sqrt'Result < 10);
       ...
    end Math_Functions;

The meaning of a test case is that there is at least one context where
`Requires' holds such that, if the associated subprogram is executed in
that context, then `Ensures' holds when the subprogram returns.  Mode
`Nominal' indicates that the input context should also satisfy the
precondition of the subprogram, and the output context should also
satisfy its postcondition. Mode `Robustness' indicates that the
precondition and postcondition of the subprogram should be ignored for
this test case.


File: gnat_rm.info,  Node: Pragma Thread_Local_Storage,  Next: Pragma Time_Slice,  Prev: Pragma Test_Case,  Up: Implementation Defined Pragmas

2.171 Pragma Thread_Local_Storage
=================================

Syntax:

    pragma Thread_Local_Storage ([Entity =>] LOCAL_NAME);

This pragma specifies that the specified entity, which must be a
variable declared in a library level package, is to be marked as
"Thread Local Storage" (`TLS'). On systems supporting this (which
include Solaris, GNU/Linux and VxWorks 6), this causes each thread (and
hence each Ada task) to see a distinct copy of the variable.

The variable may not have default initialization, and if there is an
explicit initialization, it must be either `null' for an access
variable, or a static expression for a scalar variable.  This provides
a low level mechanism similar to that provided by the
`Ada.Task_Attributes' package, but much more efficient and is also
useful in writing interface code that will interact with foreign
threads.

If this pragma is used on a system where `TLS' is not supported, then
an error message will be generated and the program will be rejected.


File: gnat_rm.info,  Node: Pragma Time_Slice,  Next: Pragma Title,  Prev: Pragma Thread_Local_Storage,  Up: Implementation Defined Pragmas

2.172 Pragma Time_Slice
=======================

Syntax:

    pragma Time_Slice (static_duration_EXPRESSION);

For implementations of GNAT on operating systems where it is possible
to supply a time slice value, this pragma may be used for this purpose.
It is ignored if it is used in a system that does not allow this
control, or if it appears in other than the main program unit.


File: gnat_rm.info,  Node: Pragma Title,  Next: Pragma Type_Invariant,  Prev: Pragma Time_Slice,  Up: Implementation Defined Pragmas

2.173 Pragma Title
==================

Syntax:

    pragma Title (TITLING_OPTION [, TITLING OPTION]);

    TITLING_OPTION ::=
      [Title    =>] STRING_LITERAL,
    | [Subtitle =>] STRING_LITERAL

Syntax checked but otherwise ignored by GNAT.  This is a listing control
pragma used in DEC Ada 83 implementations to provide a title and/or
subtitle for the program listing.  The program listing generated by GNAT
does not have titles or subtitles.

Unlike other pragmas, the full flexibility of named notation is allowed
for this pragma, i.e., the parameters may be given in any order if named
notation is used, and named and positional notation can be mixed
following the normal rules for procedure calls in Ada.


File: gnat_rm.info,  Node: Pragma Type_Invariant,  Next: Pragma Type_Invariant_Class,  Prev: Pragma Title,  Up: Implementation Defined Pragmas

2.174 Pragma Type_Invariant
===========================

Syntax:

    pragma Type_Invariant
      ([Entity =>] type_LOCAL_NAME,
       [Check  =>] EXPRESSION);

The `Type_Invariant' pragma is intended to be an exact replacement for
the language-defined `Type_Invariant' aspect, and shares its
restrictions and semantics. It differs from the language defined
`Invariant' pragma in that it does not permit a string parameter, and
it is controlled by the assertion identifier `Type_Invariant' rather
than `Invariant'.


File: gnat_rm.info,  Node: Pragma Type_Invariant_Class,  Next: Pragma Unchecked_Union,  Prev: Pragma Type_Invariant,  Up: Implementation Defined Pragmas

2.175 Pragma Type_Invariant_Class
=================================

Syntax:

    pragma Type_Invariant_Class
      ([Entity =>] type_LOCAL_NAME,
       [Check  =>] EXPRESSION);

The `Type_Invariant_Class' pragma is intended to be an exact
replacement for the language-defined `Type_Invariant'Class' aspect, and
shares its restrictions and semantics.

Note: This pragma is called `Type_Invariant_Class' rather than
`Type_Invariant'Class' because the latter would not be strictly
conforming to the allowed syntax for pragmas. The motivation for
providing pragmas equivalent to the aspects is to allow a program to be
written using the pragmas, and then compiled if necessary using an Ada
compiler that does not recognize the pragmas or aspects, but is
prepared to ignore the pragmas. The assertion policy that controls this
pragma is `Type_Invariant'Class', not `Type_Invariant_Class'.


File: gnat_rm.info,  Node: Pragma Unchecked_Union,  Next: Pragma Unevaluated_Use_Of_Old,  Prev: Pragma Type_Invariant_Class,  Up: Implementation Defined Pragmas

2.176 Pragma Unchecked_Union
============================

Syntax:

    pragma Unchecked_Union (first_subtype_LOCAL_NAME);

This pragma is used to specify a representation of a record type that is
equivalent to a C union. It was introduced as a GNAT implementation
defined pragma in the GNAT Ada 95 mode. Ada 2005 includes an extended
version of this pragma, making it language defined, and GNAT fully
implements this extended version in all language modes (Ada 83, Ada 95,
and Ada 2005). For full details, consult the Ada 2012 Reference Manual,
section B.3.3.


File: gnat_rm.info,  Node: Pragma Unevaluated_Use_Of_Old,  Next: Pragma Unimplemented_Unit,  Prev: Pragma Unchecked_Union,  Up: Implementation Defined Pragmas

2.177 Pragma Unevaluated_Use_Of_Old
===================================

Syntax:

    pragma Unevaluated_Use_Of_Old (Error | Warn | Allow);

This pragma controls the processing of attributes Old and Loop_Entry.
If either of these attributes is used in a potentially unevaluated
expression  (e.g. the then or else parts of an if expression), then
normally this usage is considered illegal if the prefix of the attribute
is other than an entity name. The language requires this behavior for
Old, and GNAT copies the same rule for Loop_Entry.

The reason for this rule is that otherwise, we can have a situation
where we save the Old value, and this results in an exception, even
though we might not evaluate the attribute. Consider this example:

    package UnevalOld is
       K : Character;
       procedure U (A : String; C : Boolean)  -- ERROR
         with Post => (if C then A(1)'Old = K else True);
    end;

If procedure U is called with a string with a lower bound of 2, and C
false, then an exception would be raised trying to evaluate A(1) on
entry even though the value would not be actually used.

Although the rule guarantees against this possibility, it is sometimes
too restrictive. For example if we know that the string has a lower
bound of 1, then we will never raise an exception.  The pragma
`Unevaluated_Use_Of_Old' can be used to modify this behavior. If the
argument is `Error' then an error is given (this is the default RM
behavior). If the argument is `Warn' then the usage is allowed as legal
but with a warning that an exception might be raised. If the argument
is `Allow' then the usage is allowed as legal without generating a
warning.

This pragma may appear as a configuration pragma, or in a declarative
part or package specification. In the latter case it applies to uses up
to the end of the corresponding statement sequence or sequence of
package declarations.


File: gnat_rm.info,  Node: Pragma Unimplemented_Unit,  Next: Pragma Universal_Aliasing,  Prev: Pragma Unevaluated_Use_Of_Old,  Up: Implementation Defined Pragmas

2.178 Pragma Unimplemented_Unit
===============================

Syntax:

    pragma Unimplemented_Unit;

If this pragma occurs in a unit that is processed by the compiler, GNAT
aborts with the message `xxx not implemented', where `xxx' is the name
of the current compilation unit.  This pragma is intended to allow the
compiler to handle unimplemented library units in a clean manner.

The abort only happens if code is being generated.  Thus you can use
specs of unimplemented packages in syntax or semantic checking mode.


File: gnat_rm.info,  Node: Pragma Universal_Aliasing,  Next: Pragma Universal_Data,  Prev: Pragma Unimplemented_Unit,  Up: Implementation Defined Pragmas

2.179 Pragma Universal_Aliasing
===============================

Syntax:

    pragma Universal_Aliasing [([Entity =>] type_LOCAL_NAME)];

`type_LOCAL_NAME' must refer to a type declaration in the current
declarative part.  The effect is to inhibit strict type-based aliasing
optimization for the given type.  In other words, the effect is as
though access types designating this type were subject to pragma
No_Strict_Aliasing.  For a detailed description of the strict aliasing
optimization, and the situations in which it must be suppressed, see
the section on `Optimization and Strict Aliasing' in the `GNAT User's
Guide'.


File: gnat_rm.info,  Node: Pragma Universal_Data,  Next: Pragma Unmodified,  Prev: Pragma Universal_Aliasing,  Up: Implementation Defined Pragmas

2.180 Pragma Universal_Data
===========================

Syntax:

    pragma Universal_Data [(library_unit_Name)];

This pragma is supported only for the AAMP target and is ignored for
other targets. The pragma specifies that all library-level objects
(Counter 0 data) associated with the library unit are to be accessed
and updated using universal addressing (24-bit addresses for AAMP5)
rather than the default of 16-bit Data Environment (DENV) addressing.
Use of this pragma will generally result in less efficient code for
references to global data associated with the library unit, but allows
such data to be located anywhere in memory. This pragma is a library
unit pragma, but can also be used as a configuration pragma (including
use in the `gnat.adc' file). The functionality of this pragma is also
available by applying the -univ switch on the compilations of units
where universal addressing of the data is desired.


File: gnat_rm.info,  Node: Pragma Unmodified,  Next: Pragma Unreferenced,  Prev: Pragma Universal_Data,  Up: Implementation Defined Pragmas

2.181 Pragma Unmodified
=======================

Syntax:

    pragma Unmodified (LOCAL_NAME {, LOCAL_NAME});

This pragma signals that the assignable entities (variables, `out'
parameters, `in out' parameters) whose names are listed are
deliberately not assigned in the current source unit. This suppresses
warnings about the entities being referenced but not assigned, and in
addition a warning will be generated if one of these entities is in
fact assigned in the same unit as the pragma (or in the corresponding
body, or one of its subunits).

This is particularly useful for clearly signaling that a particular
parameter is not modified, even though the spec suggests that it might
be.

For the variable case, warnings are never given for unreferenced
variables whose name contains one of the substrings `DISCARD, DUMMY,
IGNORE, JUNK, UNUSED' in any casing. Such names are typically to be
used in cases where such warnings are expected.  Thus it is never
necessary to use `pragma Unmodified' for such variables, though it is
harmless to do so.


File: gnat_rm.info,  Node: Pragma Unreferenced,  Next: Pragma Unreferenced_Objects,  Prev: Pragma Unmodified,  Up: Implementation Defined Pragmas

2.182 Pragma Unreferenced
=========================

Syntax:

    pragma Unreferenced (LOCAL_NAME {, LOCAL_NAME});
    pragma Unreferenced (library_unit_NAME {, library_unit_NAME});

This pragma signals that the entities whose names are listed are
deliberately not referenced in the current source unit after the
occurrence of the pragma. This suppresses warnings about the entities
being unreferenced, and in addition a warning will be generated if one
of these entities is in fact subsequently referenced in the same unit
as the pragma (or in the corresponding body, or one of its subunits).

This is particularly useful for clearly signaling that a particular
parameter is not referenced in some particular subprogram implementation
and that this is deliberate. It can also be useful in the case of
objects declared only for their initialization or finalization side
effects.

If `LOCAL_NAME' identifies more than one matching homonym in the
current scope, then the entity most recently declared is the one to
which the pragma applies. Note that in the case of accept formals, the
pragma Unreferenced may appear immediately after the keyword `do' which
allows the indication of whether or not accept formals are referenced
or not to be given individually for each accept statement.

The left hand side of an assignment does not count as a reference for
the purpose of this pragma. Thus it is fine to assign to an entity for
which pragma Unreferenced is given.

Note that if a warning is desired for all calls to a given subprogram,
regardless of whether they occur in the same unit as the subprogram
declaration, then this pragma should not be used (calls from another
unit would not be flagged); pragma Obsolescent can be used instead for
this purpose, see *Note Pragma Obsolescent: 8c.

The second form of pragma `Unreferenced' is used within a context
clause. In this case the arguments must be unit names of units
previously mentioned in `with' clauses (similar to the usage of pragma
`Elaborate_All'. The effect is to suppress warnings about unreferenced
units and unreferenced entities within these units.

For the variable case, warnings are never given for unreferenced
variables whose name contains one of the substrings `DISCARD, DUMMY,
IGNORE, JUNK, UNUSED' in any casing. Such names are typically to be
used in cases where such warnings are expected.  Thus it is never
necessary to use `pragma Unreferenced' for such variables, though it is
harmless to do so.


File: gnat_rm.info,  Node: Pragma Unreferenced_Objects,  Next: Pragma Unreserve_All_Interrupts,  Prev: Pragma Unreferenced,  Up: Implementation Defined Pragmas

2.183 Pragma Unreferenced_Objects
=================================

Syntax:

    pragma Unreferenced_Objects (local_subtype_NAME {, local_subtype_NAME});

This pragma signals that for the types or subtypes whose names are
listed, objects which are declared with one of these types or subtypes
may not be referenced, and if no references appear, no warnings are
given.

This is particularly useful for objects which are declared solely for
their initialization and finalization effect. Such variables are
sometimes referred to as RAII variables (Resource Acquisition Is
Initialization). Using this pragma on the relevant type (most typically
a limited controlled type), the compiler will automatically suppress
unwanted warnings about these variables not being referenced.


File: gnat_rm.info,  Node: Pragma Unreserve_All_Interrupts,  Next: Pragma Unsuppress,  Prev: Pragma Unreferenced_Objects,  Up: Implementation Defined Pragmas

2.184 Pragma Unreserve_All_Interrupts
=====================================

Syntax:

    pragma Unreserve_All_Interrupts;

Normally certain interrupts are reserved to the implementation.  Any
attempt to attach an interrupt causes Program_Error to be raised, as
described in RM C.3.2(22).  A typical example is the `SIGINT' interrupt
used in many systems for a `Ctrl-C' interrupt.  Normally this interrupt
is reserved to the implementation, so that `Ctrl-C' can be used to
interrupt execution.

If the pragma `Unreserve_All_Interrupts' appears anywhere in any unit in
a program, then all such interrupts are unreserved.  This allows the
program to handle these interrupts, but disables their standard
functions.  For example, if this pragma is used, then pressing `Ctrl-C'
will not automatically interrupt execution.  However, a program can
then handle the `SIGINT' interrupt as it chooses.

For a full list of the interrupts handled in a specific implementation,
see the source code for the spec of `Ada.Interrupts.Names' in file
`a-intnam.ads'.  This is a target dependent file that contains the list
of interrupts recognized for a given target.  The documentation in this
file also specifies what interrupts are affected by the use of the
`Unreserve_All_Interrupts' pragma.

For a more general facility for controlling what interrupts can be
handled, see pragma `Interrupt_State', which subsumes the functionality
of the `Unreserve_All_Interrupts' pragma.


File: gnat_rm.info,  Node: Pragma Unsuppress,  Next: Pragma Use_VADS_Size,  Prev: Pragma Unreserve_All_Interrupts,  Up: Implementation Defined Pragmas

2.185 Pragma Unsuppress
=======================

Syntax:

    pragma Unsuppress (IDENTIFIER [, [On =>] NAME]);

This pragma undoes the effect of a previous pragma `Suppress'.  If
there is no corresponding pragma `Suppress' in effect, it has no
effect.  The range of the effect is the same as for pragma `Suppress'.
The meaning of the arguments is identical to that used in pragma
`Suppress'.

One important application is to ensure that checks are on in cases where
code depends on the checks for its correct functioning, so that the code
will compile correctly even if the compiler switches are set to suppress
checks. For example, in a program that depends on external names of
tagged types and wants to ensure that the duplicated tag check occurs
even if all run-time checks are suppressed by a compiler switch, the
following configuration pragma will ensure this test is not suppressed:

    pragma Unsuppress (Duplicated_Tag_Check);

This pragma is standard in Ada 2005. It is available in all earlier
versions of Ada as an implementation-defined pragma.

Note that in addition to the checks defined in the Ada RM, GNAT
recogizes a number of implementation-defined check names. See
description of pragma `Suppress' for full details.


File: gnat_rm.info,  Node: Pragma Use_VADS_Size,  Next: Pragma Validity_Checks,  Prev: Pragma Unsuppress,  Up: Implementation Defined Pragmas

2.186 Pragma Use_VADS_Size
==========================

Syntax:

    pragma Use_VADS_Size;

This is a configuration pragma.  In a unit to which it applies, any use
of the 'Size attribute is automatically interpreted as a use of the
'VADS_Size attribute.  Note that this may result in incorrect semantic
processing of valid Ada 95 or Ada 2005 programs.  This is intended to
aid in the handling of existing code which depends on the
interpretation of Size as implemented in the VADS compiler.  See
description of the VADS_Size attribute for further details.


File: gnat_rm.info,  Node: Pragma Validity_Checks,  Next: Pragma Volatile,  Prev: Pragma Use_VADS_Size,  Up: Implementation Defined Pragmas

2.187 Pragma Validity_Checks
============================

Syntax:

    pragma Validity_Checks (string_LITERAL | ALL_CHECKS | On | Off);

This pragma is used in conjunction with compiler switches to control the
built-in validity checking provided by GNAT.  The compiler switches, if
set provide an initial setting for the switches, and this pragma may be
used to modify these settings, or the settings may be provided entirely
by the use of the pragma.  This pragma can be used anywhere that a
pragma is legal, including use as a configuration pragma (including use
in the `gnat.adc' file).

The form with a string literal specifies which validity options are to
be activated.  The validity checks are first set to include only the
default reference manual settings, and then a string of letters in the
string specifies the exact set of options required.  The form of this
string is exactly as described for the `-gnatVx' compiler switch (see
the GNAT User's Guide for details).  For example the following two
methods can be used to enable validity checking for mode `in' and `in
out' subprogram parameters:

   *     pragma Validity_Checks ("im");

   *     $ gcc -c -gnatVim ...

The form ALL_CHECKS activates all standard checks (its use is equivalent
to the use of the `gnatva' switch.

The forms with `Off' and `On' can be used to temporarily disable
validity checks as shown in the following example:

    pragma Validity_Checks ("c"); -- validity checks for copies
    pragma Validity_Checks (Off); -- turn off validity checks
    A := B;                       -- B will not be validity checked
    pragma Validity_Checks (On);  -- turn validity checks back on
    A := C;                       -- C will be validity checked


File: gnat_rm.info,  Node: Pragma Volatile,  Next: Pragma Warning_As_Error,  Prev: Pragma Validity_Checks,  Up: Implementation Defined Pragmas

2.188 Pragma Volatile
=====================

Syntax:

    pragma Volatile (LOCAL_NAME);

This pragma is defined by the Ada Reference Manual, and the GNAT
implementation is fully conformant with this definition.  The reason it
is mentioned in this section is that a pragma of the same name was
supplied in some Ada 83 compilers, including DEC Ada 83.  The Ada 95 /
Ada 2005 implementation of pragma Volatile is upwards compatible with
the implementation in DEC Ada 83.


File: gnat_rm.info,  Node: Pragma Warning_As_Error,  Next: Pragma Warnings,  Prev: Pragma Volatile,  Up: Implementation Defined Pragmas

2.189 Pragma Warning_As_Error
=============================

Syntax:

    pragma Warning_As_Error (static_string_EXPRESSION);

This configuration pragma allows the programmer to specify a set of
warnings that will be treated as errors. Any warning which matches the
pattern given by the pragma argument will be treated as an error. This
gives much more precise control that -gnatwe which treats all warnings
as errors.

The pattern may contain asterisks, which match zero or more characters
in the message. For example, you can use `pragma Warning_As_Error
("bits of*unused")' to treat the warning message `warning: 960 bits of
"a" unused' as an error. No other regular expression notations are
permitted. All characters other than asterisk in these three specific
cases are treated as literal characters in the match.  The match is
case insensitive, for example XYZ matches xyz.

Note that the pattern matches if it occurs anywhere within the warning
message string (it is not necessary to put an asterisk at the start and
the end of the message, since this is implied).

Another possibility for the static_string_EXPRESSION which works whether
or not error tags are enabled (`-gnatw.d') is to use the `-gnatw' tag
string, enclosed in brackets, as shown in the example below, to treat a
class of warnings as errors.

The above use of patterns to match the message applies only to warning
messages generated by the front end. This pragma can also be applied to
warnings provided by the back end and mentioned in *Note Pragma
Warnings: dd.  By using a single full `-Wxxx' switch in the pragma,
such warnings can also be treated as errors.

The pragma can appear either in a global configuration pragma file
(e.g. `gnat.adc'), or at the start of a file. Given a global
configuration pragma file containing:

    pragma Warning_As_Error ("[-gnatwj]");

which will treat all obsolescent feature warnings as errors, the
following program compiles as shown (compile options here are
`-gnatwa.d -gnatl -gnatj55').

        1. pragma Warning_As_Error ("*never assigned*");
        2. function Warnerr return String is
        3.    X : Integer;
              |
           >>> error: variable "X" is never read and
               never assigned [-gnatwv] [warning-as-error]

        4.    Y : Integer;
              |
           >>> warning: variable "Y" is assigned but
               never read [-gnatwu]

        5. begin
        6.    Y := 0;
        7.    return %ABC%;
                     |
           >>> error: use of "%" is an obsolescent
               feature (RM J.2(4)), use """ instead
               [-gnatwj] [warning-as-error]

        8. end;

    8 lines: No errors, 3 warnings (2 treated as errors)

Note that this pragma does not affect the set of warnings issued in any
way, it merely changes the effect of a matching warning if one is
produced as a result of other warnings options. As shown in this
example, if the pragma results in a warning being treated as an error,
the tag is changed from "warning:" to "error:" and the string
"[warning-as-error]" is appended to the end of the message.


File: gnat_rm.info,  Node: Pragma Warnings,  Next: Pragma Weak_External,  Prev: Pragma Warning_As_Error,  Up: Implementation Defined Pragmas

2.190 Pragma Warnings
=====================

Syntax:

    pragma Warnings ([TOOL_NAME,] DETAILS [, REASON]);

    DETAILS ::= On | Off
    DETAILS ::= On | Off, local_NAME
    DETAILS ::= static_string_EXPRESSION
    DETAILS ::= On | Off, static_string_EXPRESSION

    TOOL_NAME ::= GNAT | GNATProve

    REASON ::= Reason => STRING_LITERAL {& STRING_LITERAL}

Note: in Ada 83 mode, a string literal may be used in place of a static
string expression (which does not exist in Ada 83).

Note if the second argument of `DETAILS' is a `local_NAME' then the
second form is always understood. If the intention is to use the fourth
form, then you can write `NAME & ""' to force the intepretation as a
`static_string_EXPRESSION'.

Note: if the first argument is a valid `TOOL_NAME', it will be
interpreted that way. The use of the `TOOL_NAME' argument is relevant
only to users of SPARK and GNATprove, see last part of this section for
details.

Normally warnings are enabled, with the output being controlled by the
command line switch.  Warnings (`Off') turns off generation of warnings
until a Warnings (`On') is encountered or the end of the current unit.
If generation of warnings is turned off using this pragma, then some or
all of the warning messages are suppressed, regardless of the setting
of the command line switches.

The `Reason' parameter may optionally appear as the last argument in
any of the forms of this pragma. It is intended purely for the purposes
of documenting the reason for the `Warnings' pragma.  The compiler will
check that the argument is a static string but otherwise ignore this
argument. Other tools may provide specialized processing for this
string.

The form with a single argument (or two arguments if Reason present),
where the first argument is `ON' or `OFF' may be used as a
configuration pragma.

If the `LOCAL_NAME' parameter is present, warnings are suppressed for
the specified entity.  This suppression is effective from the point
where it occurs till the end of the extended scope of the variable
(similar to the scope of `Suppress'). This form cannot be used as a
configuration pragma.

In the case where the first argument is other than `ON' or `OFF', the
third form with a single static_string_EXPRESSION argument (and possible
reason) provides more precise control over which warnings are active.
The string is a list of letters specifying which warnings are to be
activated and which deactivated. The code for these letters is the same
as the string used in the command line switch controlling warnings. For
a brief summary, use the gnatmake command with no arguments, which will
generate usage information containing the list of warnings switches
supported. For full details see the section on `Warning Message
Control' in the `GNAT User's Guide'.  This form can also be used as a
configuration pragma.

The warnings controlled by the `-gnatw' switch are generated by the
front end of the compiler. The GCC back end can provide additional
warnings and they are controlled by the `-W' switch. Such warnings can
be identified by the appearance of a string of the form `[-Wxxx]' in the
message which designates the `-Wxxx' switch that controls the message.
The form with a single static_string_EXPRESSION argument also works for
these warnings, but the string must be a single full `-Wxxx' switch in
this case. The above reference lists a few examples of these additional
warnings.

The specified warnings will be in effect until the end of the program
or another pragma Warnings is encountered. The effect of the pragma is
cumulative. Initially the set of warnings is the standard default set
as possibly modified by compiler switches. Then each pragma Warning
modifies this set of warnings as specified. This form of the pragma may
also be used as a configuration pragma.

The fourth form, with an `On|Off' parameter and a string, is used to
control individual messages, based on their text. The string argument
is a pattern that is used to match against the text of individual
warning messages (not including the initial "warning: " tag).

The pattern may contain asterisks, which match zero or more characters
in the message. For example, you can use `pragma Warnings (Off, "bits
of*unused")' to suppress the warning message `warning: 960 bits of "a"
unused'. No other regular expression notations are permitted. All
characters other than asterisk in these three specific cases are
treated as literal characters in the match.  The match is case
insensitive, for example XYZ matches xyz.

Note that the pattern matches if it occurs anywhere within the warning
message string (it is not necessary to put an asterisk at the start and
the end of the message, since this is implied).

The above use of patterns to match the message applies only to warning
messages generated by the front end. This form of the pragma with a
string argument can also be used to control warnings provided by the
back end and mentioned above. By using a single full `-Wxxx' switch in
the pragma, such warnings can be turned on and off.

There are two ways to use the pragma in this form. The OFF form can be
used as a configuration pragma. The effect is to suppress all warnings
(if any) that match the pattern string throughout the compilation (or
match the -W switch in the back end case).

The second usage is to suppress a warning locally, and in this case, two
pragmas must appear in sequence:

    pragma Warnings (Off, Pattern);
    ... code where given warning is to be suppressed
    pragma Warnings (On, Pattern);

In this usage, the pattern string must match in the Off and On pragmas,
and (if `-gnatw.w' is given) at least one matching warning must be
suppressed.

Note: to write a string that will match any warning, use the string
`"***"'. It will not work to use a single asterisk or two asterisks
since this looks like an operator name. This form with three asterisks
is similar in effect to specifying `pragma Warnings (Off)' except (if
`-gnatw.w' is given) that a matching `pragma Warnings (On, "***")' will
be required. This can be helpful in avoiding forgetting to turn
warnings back on.

Note: the debug flag -gnatd.i (`/NOWARNINGS_PRAGMAS' in VMS) can be
used to cause the compiler to entirely ignore all WARNINGS pragmas.
This can be useful in checking whether obsolete pragmas in existing
programs are hiding real problems.

Note: pragma Warnings does not affect the processing of style messages.
See separate entry for pragma Style_Checks for control of style
messages.

Users of the formal verification tool GNATprove for the SPARK subset of
Ada may use the version of the pragma with a `TOOL_NAME' parameter.

If present, `TOOL_NAME' is the name of a tool, currently either `GNAT'
for the compiler or `GNATprove' for the formal verification tool. A
given tool only takes into account pragma Warnings that do not specify
a tool name, or that specify the matching tool name. This makes it
possible to disable warnings selectively for each tool, and as a
consequence to detect useless pragma Warnings with switch `-gnatw.w'.


File: gnat_rm.info,  Node: Pragma Weak_External,  Next: Pragma Wide_Character_Encoding,  Prev: Pragma Warnings,  Up: Implementation Defined Pragmas

2.191 Pragma Weak_External
==========================

Syntax:

    pragma Weak_External ([Entity =>] LOCAL_NAME);

`LOCAL_NAME' must refer to an object that is declared at the library
level. This pragma specifies that the given entity should be marked as a
weak symbol for the linker. It is equivalent to `__attribute__((weak))'
in GNU C and causes `LOCAL_NAME' to be emitted as a weak symbol instead
of a regular symbol, that is to say a symbol that does not have to be
resolved by the linker if used in conjunction with a pragma Import.

When a weak symbol is not resolved by the linker, its address is set to
zero. This is useful in writing interfaces to external modules that may
or may not be linked in the final executable, for example depending on
configuration settings.

If a program references at run time an entity to which this pragma has
been applied, and the corresponding symbol was not resolved at link
time, then the execution of the program is erroneous. It is not
erroneous to take the Address of such an entity, for example to guard
potential references, as shown in the example below.

Some file formats do not support weak symbols so not all target machines
support this pragma.

    --  Example of the use of pragma Weak_External

    package External_Module is
      key : Integer;
      pragma Import (C, key);
      pragma Weak_External (key);
      function Present return boolean;
    end External_Module;

    with System; use System;
    package body External_Module is
      function Present return boolean is
      begin
        return key'Address /= System.Null_Address;
      end Present;
    end External_Module;


File: gnat_rm.info,  Node: Pragma Wide_Character_Encoding,  Prev: Pragma Weak_External,  Up: Implementation Defined Pragmas

2.192 Pragma Wide_Character_Encoding
====================================

Syntax:

    pragma Wide_Character_Encoding (IDENTIFIER | CHARACTER_LITERAL);

This pragma specifies the wide character encoding to be used in program
source text appearing subsequently. It is a configuration pragma, but
may also be used at any point that a pragma is allowed, and it is
permissible to have more than one such pragma in a file, allowing
multiple encodings to appear within the same file.

The argument can be an identifier or a character literal. In the
identifier case, it is one of `HEX', `UPPER', `SHIFT_JIS', `EUC',
`UTF8', or `BRACKETS'. In the character literal case it is
correspondingly one of the characters `h', `u', `s', `e', `8', or `b'.

Note that when the pragma is used within a file, it affects only the
encoding within that file, and does not affect withed units, specs, or
subunits.


File: gnat_rm.info,  Node: Implementation Defined Aspects,  Next: Implementation Defined Attributes,  Prev: Implementation Defined Pragmas,  Up: Top

3 Implementation Defined Aspects
********************************

Ada defines (throughout the Ada 2012 reference manual, summarized in
Annex K) a set of aspects that can be specified for certain entities.
These language defined aspects are implemented in GNAT in Ada 2012 mode
and work as described in the Ada 2012 Reference Manual.

In addition, Ada 2012 allows implementations to define additional
aspects whose meaning is defined by the implementation.  GNAT provides
a number of these implementation-defined aspects which can be used to
extend and enhance the functionality of the compiler.  This section of
the GNAT reference manual describes these additional aspects.

Note that any program using these aspects may not be portable to other
compilers (although GNAT implements this set of aspects on all
platforms).  Therefore if portability to other compilers is an important
consideration, you should minimize the use of these aspects.

Note that for many of these aspects, the effect is essentially similar
to the use of a pragma or attribute specification with the same name
applied to the entity. For example, if we write:

    type R is range 1 .. 100
      with Value_Size => 10;

then the effect is the same as:

    type R is range 1 .. 100;
    for R'Value_Size use 10;

and if we write:

    type R is new Integer
      with Shared => True;

then the effect is the same as:

    type R is new Integer;
    pragma Shared (R);

In the documentation below, such cases are simply marked as being
boolean aspects equivalent to the corresponding pragma or attribute
definition clause.

* Menu:

* Aspect Abstract_State::
* Annotate::
* Aspect Async_Readers::
* Aspect Async_Writers::
* Aspect Contract_Cases::
* Aspect Depends::
* Aspect Dimension::
* Aspect Dimension_System::
* Aspect Effective_Reads::
* Aspect Effective_Writes::
* Aspect Favor_Top_Level::
* Aspect Global::
* Aspect Initial_Condition::
* Aspect Initializes::
* Aspect Inline_Always::
* Aspect Invariant::
* Aspect Invariant'Class::
* Aspect Iterable::
* Aspect Linker_Section::
* Aspect Lock_Free::
* Aspect No_Elaboration_Code_All::
* Aspect No_Tagged_Streams::
* Aspect Object_Size::
* Aspect Obsolescent::
* Aspect Part_Of::
* Aspect Persistent_BSS::
* Aspect Predicate::
* Aspect Pure_Function::
* Aspect Refined_Depends::
* Aspect Refined_Global::
* Aspect Refined_Post::
* Aspect Refined_State::
* Aspect Remote_Access_Type::
* Aspect Scalar_Storage_Order::
* Aspect Shared::
* Aspect Simple_Storage_Pool::
* Aspect Simple_Storage_Pool_Type::
* Aspect SPARK_Mode::
* Aspect Suppress_Debug_Info::
* Aspect Suppress_Initialization::
* Aspect Test_Case::
* Aspect Thread_Local_Storage::
* Aspect Universal_Aliasing::
* Aspect Universal_Data::
* Aspect Unmodified::
* Aspect Unreferenced::
* Aspect Unreferenced_Objects::
* Aspect Value_Size::
* Aspect Warnings::


File: gnat_rm.info,  Node: Aspect Abstract_State,  Next: Annotate,  Up: Implementation Defined Aspects

3.1 Aspect Abstract_State
=========================

This aspect is equivalent to pragma `Abstract_State'.


File: gnat_rm.info,  Node: Annotate,  Next: Aspect Async_Readers,  Prev: Aspect Abstract_State,  Up: Implementation Defined Aspects

3.2 Annotate
============

There are three forms of this aspect (where ID is an identifier, and
ARG is a general expression).

`Annotate => ID'
     Equivalent to `pragma Annotate (ID, Entity => Name);'

`Annotate => (ID)'
     Equivalent to `pragma Annotate (ID, Entity => Name);'

`Annotate => (ID ,ID {, ARG})'
     Equivalent to `pragma Annotate (ID, ID {, ARG}, Entity => Name);'


File: gnat_rm.info,  Node: Aspect Async_Readers,  Next: Aspect Async_Writers,  Prev: Annotate,  Up: Implementation Defined Aspects

3.3 Aspect Async_Readers
========================

This boolean aspect is equivalent to pragma `Async_Readers'.


File: gnat_rm.info,  Node: Aspect Async_Writers,  Next: Aspect Contract_Cases,  Prev: Aspect Async_Readers,  Up: Implementation Defined Aspects

3.4 Aspect Async_Writers
========================

This boolean aspect is equivalent to pragma `Async_Writers'.


File: gnat_rm.info,  Node: Aspect Contract_Cases,  Next: Aspect Depends,  Prev: Aspect Async_Writers,  Up: Implementation Defined Aspects

3.5 Aspect Contract_Cases
=========================

This aspect is equivalent to pragma `Contract_Cases', the sequence of
clauses being enclosed in parentheses so that syntactically it is an
aggregate.


File: gnat_rm.info,  Node: Aspect Depends,  Next: Aspect Dimension,  Prev: Aspect Contract_Cases,  Up: Implementation Defined Aspects

3.6 Aspect Depends
==================

This aspect is equivalent to pragma `Depends'.


File: gnat_rm.info,  Node: Aspect Dimension,  Next: Aspect Dimension_System,  Prev: Aspect Depends,  Up: Implementation Defined Aspects

3.7 Aspect Dimension
====================

The `Dimension' aspect is used to specify the dimensions of a given
subtype of a dimensioned numeric type. The aspect also specifies a
symbol used when doing formatted output of dimensioned quantities. The
syntax is:

    with Dimension =>
      ([Symbol =>] SYMBOL, DIMENSION_VALUE {, DIMENSION_Value})

    SYMBOL ::= STRING_LITERAL | CHARACTER_LITERAL

    DIMENSION_VALUE ::=
      RATIONAL
    | others               => RATIONAL
    | DISCRETE_CHOICE_LIST => RATIONAL

    RATIONAL ::= [-] NUMERIC_LITERAL [/ NUMERIC_LITERAL]

This aspect can only be applied to a subtype whose parent type has a
`Dimension_Systen' aspect. The aspect must specify values for all
dimensions of the system. The rational values are the powers of the
corresponding dimensions that are used by the compiler to verify that
physical (numeric) computations are dimensionally consistent. For
example, the computation of a force must result in dimensions (L => 1,
M => 1, T => -2).  For further examples of the usage of this aspect,
see package `System.Dim.Mks'.  Note that when the dimensioned type is
an integer type, then any dimension value must be an integer literal.


File: gnat_rm.info,  Node: Aspect Dimension_System,  Next: Aspect Effective_Reads,  Prev: Aspect Dimension,  Up: Implementation Defined Aspects

3.8 Aspect Dimension_System
===========================

The `Dimension_System' aspect is used to define a system of dimensions
that will be used in subsequent subtype declarations with `Dimension'
aspects that reference this system. The syntax is:

    with Dimension_System => (DIMENSION {, DIMENSION});

    DIMENSION ::= ([Unit_Name   =>] IDENTIFIER,
                   [Unit_Symbol =>] SYMBOL,
                   [Dim_Symbol  =>] SYMBOL)

    SYMBOL ::= CHARACTER_LITERAL | STRING_LITERAL

This aspect is applied to a type, which must be a numeric derived type
(typically a floating-point type), that will represent values within
the dimension system. Each `DIMENSION' corresponds to one particular
dimension. A maximum of 7 dimensions may be specified. `Unit_Name' is
the name of the dimension (for example `Meter'). `Unit_Symbol' is the
shorthand used for quantities of this dimension (for example `m' for
`Meter').  `Dim_Symbol' gives the identification within the dimension
system (typically this is a single letter, e.g. `L' standing for length
for unit name `Meter').  The `Unit_Symbol' is used in formatted output
of dimensioned quantities.  The `Dim_Symbol' is used in error messages
when numeric operations have inconsistent dimensions.

GNAT provides the standard definition of the International MKS system in
the run-time package `System.Dim.Mks'. You can easily define similar
packages for cgs units or British units, and define conversion factors
between values in different systems. The MKS system is characterized by
the following aspect:

    type Mks_Type is new Long_Long_Float with
      Dimension_System => (
        (Unit_Name => Meter,    Unit_Symbol => 'm',   Dim_Symbol => 'L'),
        (Unit_Name => Kilogram, Unit_Symbol => "kg",  Dim_Symbol => 'M'),
        (Unit_Name => Second,   Unit_Symbol => 's',   Dim_Symbol => 'T'),
        (Unit_Name => Ampere,   Unit_Symbol => 'A',   Dim_Symbol => 'I'),
        (Unit_Name => Kelvin,   Unit_Symbol => 'K',   Dim_Symbol => '@'),
        (Unit_Name => Mole,     Unit_Symbol => "mol", Dim_Symbol => 'N'),
        (Unit_Name => Candela,  Unit_Symbol => "cd",  Dim_Symbol => 'J'));

Note that in the above type definition, we use the `at' symbol (`@') to
represent a theta character (avoiding the use of extended Latin-1
characters in this context).

See section 'Performing Dimensionality Analysis in GNAT' in the GNAT
Users Guide for detailed examples of use of the dimension system.


File: gnat_rm.info,  Node: Aspect Effective_Reads,  Next: Aspect Effective_Writes,  Prev: Aspect Dimension_System,  Up: Implementation Defined Aspects

3.9 Aspect Effective_Reads
==========================

This aspect is equivalent to pragma `Effective_Reads'.


File: gnat_rm.info,  Node: Aspect Effective_Writes,  Next: Aspect Favor_Top_Level,  Prev: Aspect Effective_Reads,  Up: Implementation Defined Aspects

3.10 Aspect Effective_Writes
============================

This aspect is equivalent to pragma `Effective_Writes'.


File: gnat_rm.info,  Node: Aspect Favor_Top_Level,  Next: Aspect Global,  Prev: Aspect Effective_Writes,  Up: Implementation Defined Aspects

3.11 Aspect Favor_Top_Level
===========================

This boolean aspect is equivalent to pragma `Favor_Top_Level'.


File: gnat_rm.info,  Node: Aspect Global,  Next: Aspect Initial_Condition,  Prev: Aspect Favor_Top_Level,  Up: Implementation Defined Aspects

3.12 Aspect Global
==================

This aspect is equivalent to pragma `Global'.


File: gnat_rm.info,  Node: Aspect Initial_Condition,  Next: Aspect Initializes,  Prev: Aspect Global,  Up: Implementation Defined Aspects

3.13 Aspect Initial_Condition
=============================

This aspect is equivalent to pragma `Initial_Condition'.


File: gnat_rm.info,  Node: Aspect Initializes,  Next: Aspect Inline_Always,  Prev: Aspect Initial_Condition,  Up: Implementation Defined Aspects

3.14 Aspect Initializes
=======================

This aspect is equivalent to pragma `Initializes'.


File: gnat_rm.info,  Node: Aspect Inline_Always,  Next: Aspect Invariant,  Prev: Aspect Initializes,  Up: Implementation Defined Aspects

3.15 Aspect Inline_Always
=========================

This boolean aspect is equivalent to pragma `Inline_Always'.


File: gnat_rm.info,  Node: Aspect Invariant,  Next: Aspect Invariant'Class,  Prev: Aspect Inline_Always,  Up: Implementation Defined Aspects

3.16 Aspect Invariant
=====================

This aspect is equivalent to pragma `Invariant'. It is a synonym for
the language defined aspect `Type_Invariant' except that it is
separately controllable using pragma `Assertion_Policy'.


File: gnat_rm.info,  Node: Aspect Invariant'Class,  Next: Aspect Iterable,  Prev: Aspect Invariant,  Up: Implementation Defined Aspects

3.17 Aspect Invariant'Class
===========================

This aspect is equivalent to pragma `Type_Invariant_Class'. It is a
synonym for the language defined aspect `Type_Invariant'Class' except
that it is separately controllable using pragma `Assertion_Policy'.


File: gnat_rm.info,  Node: Aspect Iterable,  Next: Aspect Linker_Section,  Prev: Aspect Invariant'Class,  Up: Implementation Defined Aspects

3.18 Aspect Iterable
====================

This aspect provides a light-weight mechanism for loops and quantified
expressions over container types, without the overhead imposed by the
tampering checks of standard Ada 2012 iterators. The value of the
aspect is an aggregate with four named components: `First', `Next',
`Has_Element', and `Element' (the last one being optional). When only 3
components are specified, only the `for .. in' form of iteration over
cursors is available. When all 4 components are specified, both this
form and the `for .. of' form of iteration over elements are available.
The following is a typical example of use:

    type List is private with
        Iterable => (First        => First_Cursor,
                     Next         => Advance,
                     Has_Element  => Cursor_Has_Element,
                    [Element      => Get_Element]);

   * The value denoted by `First' must denote a primitive operation of
     the container type that returns a `Cursor', which must a be a type
     declared in the container package or visible from it. For example:

    function First_Cursor (Cont : Container) return Cursor;

   * The value of `Next' is a primitive operation of the container type
     that takes both a container and a cursor and yields a cursor. For
     example:

    function Advance (Cont : Container; Position : Cursor) return Cursor;

   * The value of `Has_Element' is a primitive operation of the
     container type that takes both a container and a cursor and yields
     a boolean. For example:

    function Cursor_Has_Element (Cont : Container; Position : Cursor) return Boolean;

   * The value of `Element' is a primitive operation of the container
     type that takes both a container and a cursor and yields an
     `Element_Type', which must be a type declared in the container
     package or visible from it. For example:

    function Get_Element (Cont : Container; Position : Cursor) return Element_Type;

This aspect is used in the GNAT-defined formal container packages.


File: gnat_rm.info,  Node: Aspect Linker_Section,  Next: Aspect Lock_Free,  Prev: Aspect Iterable,  Up: Implementation Defined Aspects

3.19 Aspect Linker_Section
==========================

This aspect is equivalent to an `Linker_Section' pragma.


File: gnat_rm.info,  Node: Aspect Lock_Free,  Next: Aspect No_Elaboration_Code_All,  Prev: Aspect Linker_Section,  Up: Implementation Defined Aspects

3.20 Aspect Lock_Free
=====================

This boolean aspect is equivalent to pragma `Lock_Free'.


File: gnat_rm.info,  Node: Aspect No_Elaboration_Code_All,  Next: Aspect No_Tagged_Streams,  Prev: Aspect Lock_Free,  Up: Implementation Defined Aspects

3.21 Aspect No_Elaboration_Code_All
===================================

This aspect is equivalent to a `pragma No_Elaboration_Code_All'
statement for a program unit.


File: gnat_rm.info,  Node: Aspect No_Tagged_Streams,  Next: Aspect Object_Size,  Prev: Aspect No_Elaboration_Code_All,  Up: Implementation Defined Aspects

3.22 Aspect No_Tagged_Streams
=============================

This aspect is equivalent to a `pragma No_Tagged_Streams' with an
argument specifying a root tagged type (thus this aspect can only be
applied to such a type).


File: gnat_rm.info,  Node: Aspect Object_Size,  Next: Aspect Obsolescent,  Prev: Aspect No_Tagged_Streams,  Up: Implementation Defined Aspects

3.23 Aspect Object_Size
=======================

This aspect is equivalent to an `Object_Size' attribute definition
clause.


File: gnat_rm.info,  Node: Aspect Obsolescent,  Next: Aspect Part_Of,  Prev: Aspect Object_Size,  Up: Implementation Defined Aspects

3.24 Aspect Obsolescent
=======================

This aspect is equivalent to an `Obsolescent' pragma. Note that the
evaluation of this aspect happens at the point of occurrence, it is not
delayed until the freeze point.


File: gnat_rm.info,  Node: Aspect Part_Of,  Next: Aspect Persistent_BSS,  Prev: Aspect Obsolescent,  Up: Implementation Defined Aspects

3.25 Aspect Part_Of
===================

This aspect is equivalent to pragma `Part_Of'.


File: gnat_rm.info,  Node: Aspect Persistent_BSS,  Next: Aspect Predicate,  Prev: Aspect Part_Of,  Up: Implementation Defined Aspects

3.26 Aspect Persistent_BSS
==========================

This boolean aspect is equivalent to pragma `Persistent_BSS'.


File: gnat_rm.info,  Node: Aspect Predicate,  Next: Aspect Pure_Function,  Prev: Aspect Persistent_BSS,  Up: Implementation Defined Aspects

3.27 Aspect Predicate
=====================

This aspect is equivalent to pragma `Predicate'. It is thus similar to
the language defined aspects `Dynamic_Predicate' and `Static_Predicate'
except that whether the resulting predicate is static or dynamic is
controlled by the form of the expression. It is also separately
controllable using pragma `Assertion_Policy'.


File: gnat_rm.info,  Node: Aspect Pure_Function,  Next: Aspect Refined_Depends,  Prev: Aspect Predicate,  Up: Implementation Defined Aspects

3.28 Aspect Pure_Function
=========================

This boolean aspect is equivalent to pragma `Pure_Function'.


File: gnat_rm.info,  Node: Aspect Refined_Depends,  Next: Aspect Refined_Global,  Prev: Aspect Pure_Function,  Up: Implementation Defined Aspects

3.29 Aspect Refined_Depends
===========================

This aspect is equivalent to pragma `Refined_Depends'.


File: gnat_rm.info,  Node: Aspect Refined_Global,  Next: Aspect Refined_Post,  Prev: Aspect Refined_Depends,  Up: Implementation Defined Aspects

3.30 Aspect Refined_Global
==========================

This aspect is equivalent to pragma `Refined_Global'.


File: gnat_rm.info,  Node: Aspect Refined_Post,  Next: Aspect Refined_State,  Prev: Aspect Refined_Global,  Up: Implementation Defined Aspects

3.31 Aspect Refined_Post
========================

This aspect is equivalent to pragma `Refined_Post'.


File: gnat_rm.info,  Node: Aspect Refined_State,  Next: Aspect Remote_Access_Type,  Prev: Aspect Refined_Post,  Up: Implementation Defined Aspects

3.32 Aspect Refined_State
=========================

This aspect is equivalent to pragma `Refined_State'.


File: gnat_rm.info,  Node: Aspect Remote_Access_Type,  Next: Aspect Scalar_Storage_Order,  Prev: Aspect Refined_State,  Up: Implementation Defined Aspects

3.33 Aspect Remote_Access_Type
==============================

This aspect is equivalent to pragma `Remote_Access_Type'.


File: gnat_rm.info,  Node: Aspect Scalar_Storage_Order,  Next: Aspect Shared,  Prev: Aspect Remote_Access_Type,  Up: Implementation Defined Aspects

3.34 Aspect Scalar_Storage_Order
================================

This aspect is equivalent to a `Scalar_Storage_Order' attribute
definition clause.


File: gnat_rm.info,  Node: Aspect Shared,  Next: Aspect Simple_Storage_Pool,  Prev: Aspect Scalar_Storage_Order,  Up: Implementation Defined Aspects

3.35 Aspect Shared
==================

This boolean aspect is equivalent to pragma `Shared', and is thus a
synonym for aspect `Atomic'.


File: gnat_rm.info,  Node: Aspect Simple_Storage_Pool,  Next: Aspect Simple_Storage_Pool_Type,  Prev: Aspect Shared,  Up: Implementation Defined Aspects

3.36 Aspect Simple_Storage_Pool
===============================

This aspect is equivalent to a `Simple_Storage_Pool' attribute
definition clause.


File: gnat_rm.info,  Node: Aspect Simple_Storage_Pool_Type,  Next: Aspect SPARK_Mode,  Prev: Aspect Simple_Storage_Pool,  Up: Implementation Defined Aspects

3.37 Aspect Simple_Storage_Pool_Type
====================================

This boolean aspect is equivalent to pragma `Simple_Storage_Pool_Type'.


File: gnat_rm.info,  Node: Aspect SPARK_Mode,  Next: Aspect Suppress_Debug_Info,  Prev: Aspect Simple_Storage_Pool_Type,  Up: Implementation Defined Aspects

3.38 Aspect SPARK_Mode
======================

This aspect is equivalent to pragma `SPARK_Mode' and may be specified
for either or both of the specification and body of a subprogram or
package.


File: gnat_rm.info,  Node: Aspect Suppress_Debug_Info,  Next: Aspect Suppress_Initialization,  Prev: Aspect SPARK_Mode,  Up: Implementation Defined Aspects

3.39 Aspect Suppress_Debug_Info
===============================

This boolean aspect is equivalent to pragma `Suppress_Debug_Info'.


File: gnat_rm.info,  Node: Aspect Suppress_Initialization,  Next: Aspect Test_Case,  Prev: Aspect Suppress_Debug_Info,  Up: Implementation Defined Aspects

3.40 Aspect Suppress_Initialization
===================================

This boolean aspect is equivalent to pragma `Suppress_Initialization'.


File: gnat_rm.info,  Node: Aspect Test_Case,  Next: Aspect Thread_Local_Storage,  Prev: Aspect Suppress_Initialization,  Up: Implementation Defined Aspects

3.41 Aspect Test_Case
=====================

This aspect is equivalent to pragma `Test_Case'.


File: gnat_rm.info,  Node: Aspect Thread_Local_Storage,  Next: Aspect Universal_Aliasing,  Prev: Aspect Test_Case,  Up: Implementation Defined Aspects

3.42 Aspect Thread_Local_Storage
================================

This boolean aspect is equivalent to pragma `Thread_Local_Storage'.


File: gnat_rm.info,  Node: Aspect Universal_Aliasing,  Next: Aspect Universal_Data,  Prev: Aspect Thread_Local_Storage,  Up: Implementation Defined Aspects

3.43 Aspect Universal_Aliasing
==============================

This boolean aspect is equivalent to pragma `Universal_Aliasing'.


File: gnat_rm.info,  Node: Aspect Universal_Data,  Next: Aspect Unmodified,  Prev: Aspect Universal_Aliasing,  Up: Implementation Defined Aspects

3.44 Aspect Universal_Data
==========================

This aspect is equivalent to pragma `Universal_Data'.


File: gnat_rm.info,  Node: Aspect Unmodified,  Next: Aspect Unreferenced,  Prev: Aspect Universal_Data,  Up: Implementation Defined Aspects

3.45 Aspect Unmodified
======================

This boolean aspect is equivalent to pragma `Unmodified'.


File: gnat_rm.info,  Node: Aspect Unreferenced,  Next: Aspect Unreferenced_Objects,  Prev: Aspect Unmodified,  Up: Implementation Defined Aspects

3.46 Aspect Unreferenced
========================

This boolean aspect is equivalent to pragma `Unreferenced'. Note that
in the case of formal parameters, it is not permitted to have aspects
for a formal parameter, so in this case the pragma form must be used.


File: gnat_rm.info,  Node: Aspect Unreferenced_Objects,  Next: Aspect Value_Size,  Prev: Aspect Unreferenced,  Up: Implementation Defined Aspects

3.47 Aspect Unreferenced_Objects
================================

This boolean aspect is equivalent to pragma `Unreferenced_Objects'.


File: gnat_rm.info,  Node: Aspect Value_Size,  Next: Aspect Warnings,  Prev: Aspect Unreferenced_Objects,  Up: Implementation Defined Aspects

3.48 Aspect Value_Size
======================

This aspect is equivalent to a `Value_Size' attribute definition clause.


File: gnat_rm.info,  Node: Aspect Warnings,  Prev: Aspect Value_Size,  Up: Implementation Defined Aspects

3.49 Aspect Warnings
====================

This aspect is equivalent to the two argument form of pragma `Warnings',
where the first argument is `ON' or `OFF' and the second argument is
the entity.


File: gnat_rm.info,  Node: Implementation Defined Attributes,  Next: Standard and Implementation Defined Restrictions,  Prev: Implementation Defined Aspects,  Up: Top

4 Implementation Defined Attributes
***********************************

Ada defines (throughout the Ada reference manual, summarized in Annex
K), a set of attributes that provide useful additional functionality in
all areas of the language.  These language defined attributes are
implemented in GNAT and work as described in the Ada Reference Manual.

In addition, Ada allows implementations to define additional attributes
whose meaning is defined by the implementation.  GNAT provides a number
of these implementation-dependent attributes which can be used to
extend and enhance the functionality of the compiler.  This section of
the GNAT reference manual describes these additional attributes.  It
also describes additional implementation-dependent features of standard
language-defined attributes.

Note that any program using these attributes may not be portable to
other compilers (although GNAT implements this set of attributes on all
platforms).  Therefore if portability to other compilers is an important
consideration, you should minimize the use of these attributes.

* Menu:

* Attribute Abort_Signal::
* Attribute Address_Size::
* Attribute Asm_Input::
* Attribute Asm_Output::
* Attribute Atomic_Always_Lock_Free::
* Attribute Bit::
* Attribute Bit_Position::
* Attribute Code_Address::
* Attribute Compiler_Version::
* Attribute Constrained::
* Attribute Default_Bit_Order::
* Attribute Default_Scalar_Storage_Order::
* Attribute Deref::
* Attribute Descriptor_Size::
* Attribute Elaborated::
* Attribute Elab_Body::
* Attribute Elab_Spec::
* Attribute Elab_Subp_Body::
* Attribute Emax::
* Attribute Enabled::
* Attribute Enum_Rep::
* Attribute Enum_Val::
* Attribute Epsilon::
* Attribute Fast_Math::
* Attribute Fixed_Value::
* Attribute From_Any::
* Attribute Has_Access_Values::
* Attribute Has_Discriminants::
* Attribute Img::
* Attribute Integer_Value::
* Attribute Invalid_Value::
* Attribute Iterable::
* Attribute Large::
* Attribute Library_Level::
* Attribute Lock_Free::
* Attribute Loop_Entry::
* Attribute Machine_Size::
* Attribute Mantissa::
* Attribute Maximum_Alignment::
* Attribute Mechanism_Code::
* Attribute Null_Parameter::
* Attribute Object_Size::
* Attribute Old::
* Attribute Passed_By_Reference::
* Attribute Pool_Address::
* Attribute Range_Length::
* Attribute Ref::
* Attribute Restriction_Set::
* Attribute Result::
* Attribute Safe_Emax::
* Attribute Safe_Large::
* Attribute Safe_Small::
* Attribute Scalar_Storage_Order::
* Attribute Simple_Storage_Pool::
* Attribute Small::
* Attribute Storage_Unit::
* Attribute Stub_Type::
* Attribute System_Allocator_Alignment::
* Attribute Target_Name::
* Attribute To_Address::
* Attribute To_Any::
* Attribute Type_Class::
* Attribute Type_Key::
* Attribute TypeCode::
* Attribute UET_Address::
* Attribute Unconstrained_Array::
* Attribute Universal_Literal_String::
* Attribute Unrestricted_Access::
* Attribute Update::
* Attribute Valid_Scalars::
* Attribute VADS_Size::
* Attribute Value_Size::
* Attribute Wchar_T_Size::
* Attribute Word_Size::


File: gnat_rm.info,  Node: Attribute Abort_Signal,  Next: Attribute Address_Size,  Up: Implementation Defined Attributes

4.1 Attribute Abort_Signal
==========================

`Standard'Abort_Signal' (`Standard' is the only allowed prefix)
provides the entity for the special exception used to signal task abort
or asynchronous transfer of control.  Normally this attribute should
only be used in the tasking runtime (it is highly peculiar, and
completely outside the normal semantics of Ada, for a user program to
intercept the abort exception).


File: gnat_rm.info,  Node: Attribute Address_Size,  Next: Attribute Asm_Input,  Prev: Attribute Abort_Signal,  Up: Implementation Defined Attributes

4.2 Attribute Address_Size
==========================

`Standard'Address_Size' (`Standard' is the only allowed prefix) is a
static constant giving the number of bits in an `Address'. It is the
same value as System.Address'Size, but has the advantage of being
static, while a direct reference to System.Address'Size is non-static
because Address is a private type.


File: gnat_rm.info,  Node: Attribute Asm_Input,  Next: Attribute Asm_Output,  Prev: Attribute Address_Size,  Up: Implementation Defined Attributes

4.3 Attribute Asm_Input
=======================

The `Asm_Input' attribute denotes a function that takes two parameters.
The first is a string, the second is an expression of the type
designated by the prefix.  The first (string) argument is required to
be a static expression, and is the constraint for the parameter, (e.g.,
what kind of register is required).  The second argument is the value
to be used as the input argument.  The possible values for the constant
are the same as those used in the RTL, and are dependent on the
configuration file used to built the GCC back end.  *Note Machine Code
Insertions: 11a.


File: gnat_rm.info,  Node: Attribute Asm_Output,  Next: Attribute Atomic_Always_Lock_Free,  Prev: Attribute Asm_Input,  Up: Implementation Defined Attributes

4.4 Attribute Asm_Output
========================

The `Asm_Output' attribute denotes a function that takes two
parameters.  The first is a string, the second is the name of a variable
of the type designated by the attribute prefix.  The first (string)
argument is required to be a static expression and designates the
constraint for the parameter (e.g., what kind of register is required).
The second argument is the variable to be updated with the result.
The possible values for constraint are the same as those used in the
RTL, and are dependent on the configuration file used to build the GCC
back end.  If there are no output operands, then this argument may
either be omitted, or explicitly given as `No_Output_Operands'.  *Note
Machine Code Insertions: 11a.


File: gnat_rm.info,  Node: Attribute Atomic_Always_Lock_Free,  Next: Attribute Bit,  Prev: Attribute Asm_Output,  Up: Implementation Defined Attributes

4.5 Attribute Atomic_Always_Lock_Free
=====================================

The prefix of the `Atomic_Always_Lock_Free' attribute is a type.  The
result is a Boolean value which is True if the type has discriminants,
and False otherwise.  The result indicate whether atomic operations are
supported by the target for the given type.


File: gnat_rm.info,  Node: Attribute Bit,  Next: Attribute Bit_Position,  Prev: Attribute Atomic_Always_Lock_Free,  Up: Implementation Defined Attributes

4.6 Attribute Bit
=================

`obj'Bit', where `obj' is any object, yields the bit offset within the
storage unit (byte) that contains the first bit of storage allocated
for the object.  The value of this attribute is of the type
`Universal_Integer', and is always a non-negative number not exceeding
the value of `System.Storage_Unit'.

For an object that is a variable or a constant allocated in a register,
the value is zero.  (The use of this attribute does not force the
allocation of a variable to memory).

For an object that is a formal parameter, this attribute applies to
either the matching actual parameter or to a copy of the matching
actual parameter.

For an access object the value is zero.  Note that `obj.all'Bit' is
subject to an `Access_Check' for the designated object.  Similarly for
a record component `X.C'Bit' is subject to a discriminant check and
`X(I).Bit' and `X(I1..I2)'Bit' are subject to index checks.

This attribute is designed to be compatible with the DEC Ada 83
definition and implementation of the `Bit' attribute.


File: gnat_rm.info,  Node: Attribute Bit_Position,  Next: Attribute Code_Address,  Prev: Attribute Bit,  Up: Implementation Defined Attributes

4.7 Attribute Bit_Position
==========================

`R.C'Bit_Position', where `R' is a record object and `C' is one of the
fields of the record type, yields the bit offset within the record
contains the first bit of storage allocated for the object.  The value
of this attribute is of the type `Universal_Integer'.  The value
depends only on the field `C' and is independent of the alignment of
the containing record `R'.


File: gnat_rm.info,  Node: Attribute Code_Address,  Next: Attribute Compiler_Version,  Prev: Attribute Bit_Position,  Up: Implementation Defined Attributes

4.8 Attribute Code_Address
==========================

The `'Address' attribute may be applied to subprograms in Ada 95 and
Ada 2005, but the intended effect seems to be to provide an address
value which can be used to call the subprogram by means of an address
clause as in the following example:

    procedure K is ...

    procedure L;
    for L'Address use K'Address;
    pragma Import (Ada, L);

A call to `L' is then expected to result in a call to `K'.  In Ada 83,
where there were no access-to-subprogram values, this was a common
work-around for getting the effect of an indirect call.  GNAT
implements the above use of `Address' and the technique illustrated by
the example code works correctly.

However, for some purposes, it is useful to have the address of the
start of the generated code for the subprogram.  On some architectures,
this is not necessarily the same as the `Address' value described above.
For example, the `Address' value may reference a subprogram descriptor
rather than the subprogram itself.

The `'Code_Address' attribute, which can only be applied to subprogram
entities, always returns the address of the start of the generated code
of the specified subprogram, which may or may not be the same value as
is returned by the corresponding `'Address' attribute.


File: gnat_rm.info,  Node: Attribute Compiler_Version,  Next: Attribute Constrained,  Prev: Attribute Code_Address,  Up: Implementation Defined Attributes

4.9 Attribute Compiler_Version
==============================

`Standard'Compiler_Version' (`Standard' is the only allowed prefix)
yields a static string identifying the version of the compiler being
used to compile the unit containing the attribute reference.


File: gnat_rm.info,  Node: Attribute Constrained,  Next: Attribute Default_Bit_Order,  Prev: Attribute Compiler_Version,  Up: Implementation Defined Attributes

4.10 Attribute Constrained
==========================

In addition to the usage of this attribute in the Ada RM, `GNAT' also
permits the use of the `'Constrained' attribute in a generic template
for any type, including types without discriminants. The value of this
attribute in the generic instance when applied to a scalar type or a
record type without discriminants is always `True'. This usage is
compatible with older Ada compilers, including notably DEC Ada.


File: gnat_rm.info,  Node: Attribute Default_Bit_Order,  Next: Attribute Default_Scalar_Storage_Order,  Prev: Attribute Constrained,  Up: Implementation Defined Attributes

4.11 Attribute Default_Bit_Order
================================

`Standard'Default_Bit_Order' (`Standard' is the only permissible
prefix), provides the value `System.Default_Bit_Order' as a `Pos' value
(0 for `High_Order_First', 1 for `Low_Order_First').  This is used to
construct the definition of `Default_Bit_Order' in package `System'.


File: gnat_rm.info,  Node: Attribute Default_Scalar_Storage_Order,  Next: Attribute Deref,  Prev: Attribute Default_Bit_Order,  Up: Implementation Defined Attributes

4.12 Attribute Default_Scalar_Storage_Order
===========================================

`Standard'Default_Scalar_Storage_Order' (`Standard' is the only
permissible prefix), provides the current value of the default scalar
storage order (as specified using pragma
`Default_Scalar_Storage_Order', or equal to `Default_Bit_Order' if
unspecified) as a `System.Bit_Order' value. This is a static attribute.


File: gnat_rm.info,  Node: Attribute Deref,  Next: Attribute Descriptor_Size,  Prev: Attribute Default_Scalar_Storage_Order,  Up: Implementation Defined Attributes

4.13 Attribute Deref
====================

The attribute `typ'Deref(expr)' where `expr' is of type
`System.Address' yields the variable of type `typ' that is located at
the given address. It is similar to `(totyp (expr).all)', where `totyp'
is an unchecked conversion from address to a named access-to-`typ'
type, except that it yields a variable, so it can be used on the left
side of an assignment.


File: gnat_rm.info,  Node: Attribute Descriptor_Size,  Next: Attribute Elaborated,  Prev: Attribute Deref,  Up: Implementation Defined Attributes

4.14 Attribute Descriptor_Size
==============================

Non-static attribute `Descriptor_Size' returns the size in bits of the
descriptor allocated for a type.  The result is non-zero only for
unconstrained array types and the returned value is of type universal
integer.  In GNAT, an array descriptor contains bounds information and
is located immediately before the first element of the array.

    type Unconstr_Array is array (Positive range <>) of Boolean;
    Put_Line ("Descriptor size = " & Unconstr_Array'Descriptor_Size'Img);

The attribute takes into account any additional padding due to type
alignment.  In the example above, the descriptor contains two values of
type `Positive' representing the low and high bound.  Since `Positive'
has a size of 31 bits and an alignment of 4, the descriptor size is `2
* Positive'Size + 2' or 64 bits.


File: gnat_rm.info,  Node: Attribute Elaborated,  Next: Attribute Elab_Body,  Prev: Attribute Descriptor_Size,  Up: Implementation Defined Attributes

4.15 Attribute Elaborated
=========================

The prefix of the `'Elaborated' attribute must be a unit name.  The
value is a Boolean which indicates whether or not the given unit has
been elaborated.  This attribute is primarily intended for internal use
by the generated code for dynamic elaboration checking, but it can also
be used in user programs.  The value will always be True once
elaboration of all units has been completed.  An exception is for units
which need no elaboration, the value is always False for such units.


File: gnat_rm.info,  Node: Attribute Elab_Body,  Next: Attribute Elab_Spec,  Prev: Attribute Elaborated,  Up: Implementation Defined Attributes

4.16 Attribute Elab_Body
========================

This attribute can only be applied to a program unit name.  It returns
the entity for the corresponding elaboration procedure for elaborating
the body of the referenced unit.  This is used in the main generated
elaboration procedure by the binder and is not normally used in any
other context.  However, there may be specialized situations in which it
is useful to be able to call this elaboration procedure from Ada code,
e.g., if it is necessary to do selective re-elaboration to fix some
error.


File: gnat_rm.info,  Node: Attribute Elab_Spec,  Next: Attribute Elab_Subp_Body,  Prev: Attribute Elab_Body,  Up: Implementation Defined Attributes

4.17 Attribute Elab_Spec
========================

This attribute can only be applied to a program unit name.  It returns
the entity for the corresponding elaboration procedure for elaborating
the spec of the referenced unit.  This is used in the main generated
elaboration procedure by the binder and is not normally used in any
other context.  However, there may be specialized situations in which
it is useful to be able to call this elaboration procedure from Ada
code, e.g., if it is necessary to do selective re-elaboration to fix
some error.


File: gnat_rm.info,  Node: Attribute Elab_Subp_Body,  Next: Attribute Emax,  Prev: Attribute Elab_Spec,  Up: Implementation Defined Attributes

4.18 Attribute Elab_Subp_Body
=============================

This attribute can only be applied to a library level subprogram name
and is only allowed in CodePeer mode. It returns the entity for the
corresponding elaboration procedure for elaborating the body of the
referenced subprogram unit. This is used in the main generated
elaboration procedure by the binder in CodePeer mode only and is
unrecognized otherwise.


File: gnat_rm.info,  Node: Attribute Emax,  Next: Attribute Enabled,  Prev: Attribute Elab_Subp_Body,  Up: Implementation Defined Attributes

4.19 Attribute Emax
===================

The `Emax' attribute is provided for compatibility with Ada 83.  See
the Ada 83 reference manual for an exact description of the semantics of
this attribute.


File: gnat_rm.info,  Node: Attribute Enabled,  Next: Attribute Enum_Rep,  Prev: Attribute Emax,  Up: Implementation Defined Attributes

4.20 Attribute Enabled
======================

The `Enabled' attribute allows an application program to check at
compile time to see if the designated check is currently enabled. The
prefix is a simple identifier, referencing any predefined check name
(other than `All_Checks') or a check name introduced by pragma
Check_Name. If no argument is given for the attribute, the check is for
the general state of the check, if an argument is given, then it is an
entity name, and the check indicates whether an `Suppress' or
`Unsuppress' has been given naming the entity (if not, then the
argument is ignored).

Note that instantiations inherit the check status at the point of the
instantiation, so a useful idiom is to have a library package that
introduces a check name with `pragma Check_Name', and then contains
generic packages or subprograms which use the `Enabled' attribute to
see if the check is enabled. A user of this package can then issue a
`pragma Suppress' or `pragma Unsuppress' before instantiating the
package or subprogram, controlling whether the check will be present.


File: gnat_rm.info,  Node: Attribute Enum_Rep,  Next: Attribute Enum_Val,  Prev: Attribute Enabled,  Up: Implementation Defined Attributes

4.21 Attribute Enum_Rep
=======================

For every enumeration subtype `S', `S'Enum_Rep' denotes a function with
the following spec:

    function S'Enum_Rep (Arg : S'Base) return <Universal_Integer>;

It is also allowable to apply `Enum_Rep' directly to an object of an
enumeration type or to a non-overloaded enumeration literal.  In this
case `S'Enum_Rep' is equivalent to `typ'Enum_Rep(S)' where `typ' is the
type of the enumeration literal or object.

The function returns the representation value for the given enumeration
value.  This will be equal to value of the `Pos' attribute in the
absence of an enumeration representation clause.  This is a static
attribute (i.e.,:the result is static if the argument is static).

`S'Enum_Rep' can also be used with integer types and objects, in which
case it simply returns the integer value.  The reason for this is to
allow it to be used for `(<>)' discrete formal arguments in a generic
unit that can be instantiated with either enumeration types or integer
types.  Note that if `Enum_Rep' is used on a modular type whose upper
bound exceeds the upper bound of the largest signed integer type, and
the argument is a variable, so that the universal integer calculation
is done at run time, then the call to `Enum_Rep' may raise
`Constraint_Error'.


File: gnat_rm.info,  Node: Attribute Enum_Val,  Next: Attribute Epsilon,  Prev: Attribute Enum_Rep,  Up: Implementation Defined Attributes

4.22 Attribute Enum_Val
=======================

For every enumeration subtype `S', `S'Enum_Val' denotes a function with
the following spec:

    function S'Enum_Val (Arg : <Universal_Integer>) return S'Base;

The function returns the enumeration value whose representation matches
the argument, or raises Constraint_Error if no enumeration literal of
the type has the matching value.  This will be equal to value of the
`Val' attribute in the absence of an enumeration representation clause.
This is a static attribute (i.e., the result is static if the argument
is static).


File: gnat_rm.info,  Node: Attribute Epsilon,  Next: Attribute Fast_Math,  Prev: Attribute Enum_Val,  Up: Implementation Defined Attributes

4.23 Attribute Epsilon
======================

The `Epsilon' attribute is provided for compatibility with Ada 83.  See
the Ada 83 reference manual for an exact description of the semantics of
this attribute.


File: gnat_rm.info,  Node: Attribute Fast_Math,  Next: Attribute Fixed_Value,  Prev: Attribute Epsilon,  Up: Implementation Defined Attributes

4.24 Attribute Fast_Math
========================

`Standard'Fast_Math' (`Standard' is the only allowed prefix) yields a
static Boolean value that is True if pragma `Fast_Math' is active, and
False otherwise.


File: gnat_rm.info,  Node: Attribute Fixed_Value,  Next: Attribute From_Any,  Prev: Attribute Fast_Math,  Up: Implementation Defined Attributes

4.25 Attribute Fixed_Value
==========================

For every fixed-point type `S', `S'Fixed_Value' denotes a function with
the following specification:

    function S'Fixed_Value (Arg : <Universal_Integer>) return S;

The value returned is the fixed-point value `V' such that:

    V = Arg * S'Small

The effect is thus similar to first converting the argument to the
integer type used to represent `S', and then doing an unchecked
conversion to the fixed-point type.  The difference is that there are
full range checks, to ensure that the result is in range.  This
attribute is primarily intended for use in implementation of the
input-output functions for fixed-point values.


File: gnat_rm.info,  Node: Attribute From_Any,  Next: Attribute Has_Access_Values,  Prev: Attribute Fixed_Value,  Up: Implementation Defined Attributes

4.26 Attribute From_Any
=======================

This internal attribute is used for the generation of remote subprogram
stubs in the context of the Distributed Systems Annex.


File: gnat_rm.info,  Node: Attribute Has_Access_Values,  Next: Attribute Has_Discriminants,  Prev: Attribute From_Any,  Up: Implementation Defined Attributes

4.27 Attribute Has_Access_Values
================================

The prefix of the `Has_Access_Values' attribute is a type.  The result
is a Boolean value which is True if the is an access type, or is a
composite type with a component (at any nesting depth) that is an
access type, and is False otherwise.  The intended use of this
attribute is in conjunction with generic definitions.  If the attribute
is applied to a generic private type, it indicates whether or not the
corresponding actual type has access values.


File: gnat_rm.info,  Node: Attribute Has_Discriminants,  Next: Attribute Img,  Prev: Attribute Has_Access_Values,  Up: Implementation Defined Attributes

4.28 Attribute Has_Discriminants
================================

The prefix of the `Has_Discriminants' attribute is a type.  The result
is a Boolean value which is True if the type has discriminants, and
False otherwise.  The intended use of this attribute is in conjunction
with generic definitions.  If the attribute is applied to a generic
private type, it indicates whether or not the corresponding actual type
has discriminants.


File: gnat_rm.info,  Node: Attribute Img,  Next: Attribute Integer_Value,  Prev: Attribute Has_Discriminants,  Up: Implementation Defined Attributes

4.29 Attribute Img
==================

The `Img' attribute differs from `Image' in that it is applied directly
to an object, and yields the same result as `Image' for the subtype of
the object.  This is convenient for debugging:

    Put_Line ("X = " & X'Img);

has the same meaning as the more verbose:

    Put_Line ("X = " & T'Image (X));

where `T' is the (sub)type of the object `X'.

Note that technically, in analogy to `Image', `X'Img' returns a
parameterless function that returns the appropriate string when called.
This means that `X'Img' can be renamed as a function-returning-string,
or used in an instantiation as a function parameter.


File: gnat_rm.info,  Node: Attribute Integer_Value,  Next: Attribute Invalid_Value,  Prev: Attribute Img,  Up: Implementation Defined Attributes

4.30 Attribute Integer_Value
============================

For every integer type `S', `S'Integer_Value' denotes a function with
the following spec:

    function S'Integer_Value (Arg : <Universal_Fixed>) return S;

The value returned is the integer value `V', such that:

    Arg = V * T'Small

where `T' is the type of `Arg'.  The effect is thus similar to first
doing an unchecked conversion from the fixed-point type to its
corresponding implementation type, and then converting the result to
the target integer type.  The difference is that there are full range
checks, to ensure that the result is in range.  This attribute is
primarily intended for use in implementation of the standard
input-output functions for fixed-point values.


File: gnat_rm.info,  Node: Attribute Invalid_Value,  Next: Attribute Iterable,  Prev: Attribute Integer_Value,  Up: Implementation Defined Attributes

4.31 Attribute Invalid_Value
============================

For every scalar type S, S'Invalid_Value returns an undefined value of
the type. If possible this value is an invalid representation for the
type. The value returned is identical to the value used to initialize
an otherwise uninitialized value of the type if pragma
Initialize_Scalars is used, including the ability to modify the value
with the binder -Sxx flag and relevant environment variables at run
time.


File: gnat_rm.info,  Node: Attribute Iterable,  Next: Attribute Large,  Prev: Attribute Invalid_Value,  Up: Implementation Defined Attributes

4.32 Attribute Iterable
=======================

Equivalent to Aspect Iterable.


File: gnat_rm.info,  Node: Attribute Large,  Next: Attribute Library_Level,  Prev: Attribute Iterable,  Up: Implementation Defined Attributes

4.33 Attribute Large
====================

The `Large' attribute is provided for compatibility with Ada 83.  See
the Ada 83 reference manual for an exact description of the semantics of
this attribute.


File: gnat_rm.info,  Node: Attribute Library_Level,  Next: Attribute Lock_Free,  Prev: Attribute Large,  Up: Implementation Defined Attributes

4.34 Attribute Library_Level
============================

`P'Library_Level', where P is an entity name, returns a Boolean value
which is True if the entity is declared at the library level, and False
otherwise. Note that within a generic instantition, the name of the
generic unit denotes the instance, which means that this attribute can
be used to test if a generic is instantiated at the library level, as
shown in this example:

    generic
      ...
    package Gen is
      pragma Compile_Time_Error
        (not Gen'Library_Level,
         "Gen can only be instantiated at library level");
      ...
    end Gen;


File: gnat_rm.info,  Node: Attribute Lock_Free,  Next: Attribute Loop_Entry,  Prev: Attribute Library_Level,  Up: Implementation Defined Attributes

4.35 Attribute Lock_Free
========================

`P'Lock_Free', where P is a protected object, returns True if a pragma
`Lock_Free' applies to P.


File: gnat_rm.info,  Node: Attribute Loop_Entry,  Next: Attribute Machine_Size,  Prev: Attribute Lock_Free,  Up: Implementation Defined Attributes

4.36 Attribute Loop_Entry
=========================

Syntax:

    X'Loop_Entry [(loop_name)]

The `Loop_Entry' attribute is used to refer to the value that an
expression had upon entry to a given loop in much the same way that the
`Old' attribute in a subprogram postcondition can be used to refer to
the value an expression had upon entry to the subprogram. The relevant
loop is either identified by the given loop name, or it is the
innermost enclosing loop when no loop name is given.

A `Loop_Entry' attribute can only occur within a `Loop_Variant' or
`Loop_Invariant' pragma. A common use of `Loop_Entry' is to compare the
current value of objects with their initial value at loop entry, in a
`Loop_Invariant' pragma.

The effect of using `X'Loop_Entry' is the same as declaring a constant
initialized with the initial value of `X' at loop entry. This copy is
not performed if the loop is not entered, or if the corresponding
pragmas are ignored or disabled.


File: gnat_rm.info,  Node: Attribute Machine_Size,  Next: Attribute Mantissa,  Prev: Attribute Loop_Entry,  Up: Implementation Defined Attributes

4.37 Attribute Machine_Size
===========================

This attribute is identical to the `Object_Size' attribute.  It is
provided for compatibility with the DEC Ada 83 attribute of this name.


File: gnat_rm.info,  Node: Attribute Mantissa,  Next: Attribute Maximum_Alignment,  Prev: Attribute Machine_Size,  Up: Implementation Defined Attributes

4.38 Attribute Mantissa
=======================

The `Mantissa' attribute is provided for compatibility with Ada 83.  See
the Ada 83 reference manual for an exact description of the semantics of
this attribute.


File: gnat_rm.info,  Node: Attribute Maximum_Alignment,  Next: Attribute Mechanism_Code,  Prev: Attribute Mantissa,  Up: Implementation Defined Attributes

4.39 Attribute Maximum_Alignment
================================

`Standard'Maximum_Alignment' (`Standard' is the only permissible
prefix) provides the maximum useful alignment value for the target.
This is a static value that can be used to specify the alignment for an
object, guaranteeing that it is properly aligned in all cases.


File: gnat_rm.info,  Node: Attribute Mechanism_Code,  Next: Attribute Null_Parameter,  Prev: Attribute Maximum_Alignment,  Up: Implementation Defined Attributes

4.40 Attribute Mechanism_Code
=============================

`function'Mechanism_Code' yields an integer code for the mechanism used
for the result of function, and `subprogram'Mechanism_Code (n)' yields
the mechanism used for formal parameter number `n' (a static integer
value with 1 meaning the first parameter) of `subprogram'.  The code
returned is:

`1'
     by copy (value)

`2'
     by reference


File: gnat_rm.info,  Node: Attribute Null_Parameter,  Next: Attribute Object_Size,  Prev: Attribute Mechanism_Code,  Up: Implementation Defined Attributes

4.41 Attribute Null_Parameter
=============================

A reference `T'Null_Parameter' denotes an imaginary object of type or
subtype `T' allocated at machine address zero.  The attribute is
allowed only as the default expression of a formal parameter, or as an
actual expression of a subprogram call.  In either case, the subprogram
must be imported.

The identity of the object is represented by the address zero in the
argument list, independent of the passing mechanism (explicit or
default).

This capability is needed to specify that a zero address should be
passed for a record or other composite object passed by reference.
There is no way of indicating this without the `Null_Parameter'
attribute.


File: gnat_rm.info,  Node: Attribute Object_Size,  Next: Attribute Old,  Prev: Attribute Null_Parameter,  Up: Implementation Defined Attributes

4.42 Attribute Object_Size
==========================

The size of an object is not necessarily the same as the size of the
type of an object.  This is because by default object sizes are
increased to be a multiple of the alignment of the object.  For example,
`Natural'Size' is 31, but by default objects of type `Natural' will
have a size of 32 bits.  Similarly, a record containing an integer and
a character:

    type Rec is record
       I : Integer;
       C : Character;
    end record;

will have a size of 40 (that is `Rec'Size' will be 40).  The alignment
will be 4, because of the integer field, and so the default size of
record objects for this type will be 64 (8 bytes).

If the alignment of the above record is specified to be 1, then the
object size will be 40 (5 bytes). This is true by default, and also an
object size of 40 can be explicitly specified in this case.

A consequence of this capability is that different object sizes can be
given to subtypes that would otherwise be considered in Ada to be
statically matching.  But it makes no sense to consider such subtypes
as statically matching.  Consequently, in `GNAT' we add a rule to the
static matching rules that requires object sizes to match.  Consider
this example:

     1. procedure BadAVConvert is
     2.    type R is new Integer;
     3.    subtype R1 is R range 1 .. 10;
     4.    subtype R2 is R range 1 .. 10;
     5.    for R1'Object_Size use 8;
     6.    for R2'Object_Size use 16;
     7.    type R1P is access all R1;
     8.    type R2P is access all R2;
     9.    R1PV : R1P := new R1'(4);
    10.    R2PV : R2P;
    11. begin
    12.    R2PV := R2P (R1PV);
                   |
           >>> target designated subtype not compatible with
               type "R1" defined at line 3

    13. end;

In the absence of lines 5 and 6, types `R1' and `R2' statically match
and hence the conversion on line 12 is legal. But since lines 5 and 6
cause the object sizes to differ, `GNAT' considers that types `R1' and
`R2' are not statically matching, and line 12 generates the diagnostic
shown above.

Similar additional checks are performed in other contexts requiring
statically matching subtypes.


File: gnat_rm.info,  Node: Attribute Old,  Next: Attribute Passed_By_Reference,  Prev: Attribute Object_Size,  Up: Implementation Defined Attributes

4.43 Attribute Old
==================

In addition to the usage of `Old' defined in the Ada 2012 RM (usage
within `Post' aspect), GNAT also permits the use of this attribute in
implementation defined pragmas `Postcondition', `Contract_Cases' and
`Test_Case'. Also usages of `Old' which would be illegal according to
the Ada 2012 RM definition are allowed under control of implementation
defined pragma `Unevaluated_Use_Of_Old'.


File: gnat_rm.info,  Node: Attribute Passed_By_Reference,  Next: Attribute Pool_Address,  Prev: Attribute Old,  Up: Implementation Defined Attributes

4.44 Attribute Passed_By_Reference
==================================

`type'Passed_By_Reference' for any subtype `type' returns a value of
type `Boolean' value that is `True' if the type is normally passed by
reference and `False' if the type is normally passed by copy in calls.
For scalar types, the result is always `False' and is static.  For
non-scalar types, the result is non-static.


File: gnat_rm.info,  Node: Attribute Pool_Address,  Next: Attribute Range_Length,  Prev: Attribute Passed_By_Reference,  Up: Implementation Defined Attributes

4.45 Attribute Pool_Address
===========================

`X'Pool_Address' for any object `X' returns the address of X within its
storage pool. This is the same as `X'Address', except that for an
unconstrained array whose bounds are allocated just before the first
component, `X'Pool_Address' returns the address of those bounds,
whereas `X'Address' returns the address of the first component.

Here, we are interpreting 'storage pool' broadly to mean `wherever the
object is allocated', which could be a user-defined storage pool, the
global heap, on the stack, or in a static memory area.  For an object
created by `new', `Ptr.all'Pool_Address' is what is passed to
`Allocate' and returned from `Deallocate'.


File: gnat_rm.info,  Node: Attribute Range_Length,  Next: Attribute Ref,  Prev: Attribute Pool_Address,  Up: Implementation Defined Attributes

4.46 Attribute Range_Length
===========================

`type'Range_Length' for any discrete type `type' yields the number of
values represented by the subtype (zero for a null range).  The result
is static for static subtypes.  `Range_Length' applied to the index
subtype of a one dimensional array always gives the same result as
`Length' applied to the array itself.


File: gnat_rm.info,  Node: Attribute Ref,  Next: Attribute Restriction_Set,  Prev: Attribute Range_Length,  Up: Implementation Defined Attributes

4.47 Attribute Ref
==================


File: gnat_rm.info,  Node: Attribute Restriction_Set,  Next: Attribute Result,  Prev: Attribute Ref,  Up: Implementation Defined Attributes

4.48 Attribute Restriction_Set
==============================

This attribute allows compile time testing of restrictions that are
currently in effect. It is primarily intended for specializing code in
the run-time based on restrictions that are active (e.g.  don't need to
save fpt registers if restriction No_Floating_Point is known to be in
effect), but can be used anywhere.

There are two forms:

    System'Restriction_Set (partition_boolean_restriction_NAME)
    System'Restriction_Set (No_Dependence => library_unit_NAME);

In the case of the first form, the only restriction names allowed are
parameterless restrictions that are checked for consistency at bind
time. For a complete list see the subtype
`System.Rident.Partition_Boolean_Restrictions'.

The result returned is True if the restriction is known to be in
effect, and False if the restriction is known not to be in effect. An
important guarantee is that the value of a Restriction_Set attribute is
known to be consistent throughout all the code of a partition.

This is trivially achieved if the entire partition is compiled with a
consistent set of restriction pragmas. However, the compilation model
does not require this. It is possible to compile one set of units with
one set of pragmas, and another set of units with another set of
pragmas. It is even possible to compile a spec with one set of pragmas,
and then WITH the same spec with a different set of pragmas.
Inconsistencies in the actual use of the restriction are checked at
bind time.

In order to achieve the guarantee of consistency for the
Restriction_Set pragma, we consider that a use of the pragma that
yields False is equivalent to a violation of the restriction.

So for example if you write

    if System'Restriction_Set (No_Floating_Point) then
       ...
    else
       ...
    end if;

And the result is False, so that the else branch is executed, you can
assume that this restriction is not set for any unit in the partition.
This is checked by considering this use of the restriction pragma to be
a violation of the restriction No_Floating_Point. This means that no
other unit can attempt to set this restriction (if some unit does
attempt to set it, the binder will refuse to bind the partition).

Technical note: The restriction name and the unit name are intepreted
entirely syntactically, as in the corresponding Restrictions pragma,
they are not analyzed semantically, so they do not have a type.


File: gnat_rm.info,  Node: Attribute Result,  Next: Attribute Safe_Emax,  Prev: Attribute Restriction_Set,  Up: Implementation Defined Attributes

4.49 Attribute Result
=====================

`function'Result' can only be used with in a Postcondition pragma for a
function. The prefix must be the name of the corresponding function.
This is used to refer to the result of the function in the
postcondition expression.  For a further discussion of the use of this
attribute and examples of its use, see the description of pragma
Postcondition.


File: gnat_rm.info,  Node: Attribute Safe_Emax,  Next: Attribute Safe_Large,  Prev: Attribute Result,  Up: Implementation Defined Attributes

4.50 Attribute Safe_Emax
========================

The `Safe_Emax' attribute is provided for compatibility with Ada 83.
See the Ada 83 reference manual for an exact description of the
semantics of this attribute.


File: gnat_rm.info,  Node: Attribute Safe_Large,  Next: Attribute Safe_Small,  Prev: Attribute Safe_Emax,  Up: Implementation Defined Attributes

4.51 Attribute Safe_Large
=========================

The `Safe_Large' attribute is provided for compatibility with Ada 83.
See the Ada 83 reference manual for an exact description of the
semantics of this attribute.


File: gnat_rm.info,  Node: Attribute Safe_Small,  Next: Attribute Scalar_Storage_Order,  Prev: Attribute Safe_Large,  Up: Implementation Defined Attributes

4.52 Attribute Safe_Small
=========================

The `Safe_Small' attribute is provided for compatibility with Ada 83.
See the Ada 83 reference manual for an exact description of the
semantics of this attribute.


File: gnat_rm.info,  Node: Attribute Scalar_Storage_Order,  Next: Attribute Simple_Storage_Pool,  Prev: Attribute Safe_Small,  Up: Implementation Defined Attributes

4.53 Attribute Scalar_Storage_Order
===================================

For every array or record type `S', the representation attribute
`Scalar_Storage_Order' denotes the order in which storage elements that
make up scalar components are ordered within S. The value given must be
a static expression of type System.Bit_Order. The following is an
example of the use of this feature:

    --  Component type definitions

    subtype Yr_Type is Natural range 0 .. 127;
    subtype Mo_Type is Natural range 1 .. 12;
    subtype Da_Type is Natural range 1 .. 31;

    --  Record declaration

    type Date is record
       Years_Since_1980 : Yr_Type;
       Month            : Mo_Type;
       Day_Of_Month     : Da_Type;
    end record;

    --  Record representation clause

    for Date use record
       Years_Since_1980 at 0 range 0  ..  6;
       Month            at 0 range 7  .. 10;
       Day_Of_Month     at 0 range 11 .. 15;
    end record;

    --  Attribute definition clauses

    for Date'Bit_Order use System.High_Order_First;
    for Date'Scalar_Storage_Order use System.High_Order_First;
    --  If Scalar_Storage_Order is specified, it must be consistent with
    --  Bit_Order, so it's best to always define the latter explicitly if
    --  the former is used.

Other properties are as for standard representation attribute
`Bit_Order', as defined by Ada RM 13.5.3(4). The default is
`System.Default_Bit_Order'.

For a record type `T', if `T'Scalar_Storage_Order' is specified
explicitly, it shall be equal to `T'Bit_Order'. Note: this means that
if a `Scalar_Storage_Order' attribute definition clause is not
confirming, then the type's `Bit_Order' shall be specified explicitly
and set to the same value.

Derived types inherit an explicitly set scalar storage order from their
parent types. This may be overridden for the derived type by giving an
explicit scalar storage order for the derived type. For a record
extension, the derived type must have the same scalar storage order as
the parent type.

If a component of `T' is of a record or array type, then that type must
also have a `Scalar_Storage_Order' attribute definition clause.

A component of a record or array type that is a packed array, or that
does not start on a byte boundary, must have the same scalar storage
order as the enclosing record or array type.

No component of a type that has an explicit `Scalar_Storage_Order'
attribute definition may be aliased.

A confirming `Scalar_Storage_Order' attribute definition clause (i.e.
with a value equal to `System.Default_Bit_Order') has no effect.

If the opposite storage order is specified, then whenever the value of
a scalar component of an object of type `S' is read, the storage
elements of the enclosing machine scalar are first reversed (before
retrieving the component value, possibly applying some shift and mask
operatings on the enclosing machine scalar), and the opposite operation
is done for writes.

In that case, the restrictions set forth in 13.5.1(10.3/2) for scalar
components are relaxed. Instead, the following rules apply:

   * the underlying storage elements are those at positions `(position
     + first_bit / storage_element_size) .. (position + (last_bit +
     storage_element_size - 1) / storage_element_size)'

   * the sequence of underlying storage elements shall have a size no
     greater than the largest machine scalar

   * the enclosing machine scalar is defined as the smallest machine
     scalar starting at a position no greater than `position +
     first_bit / storage_element_size' and covering storage elements at
     least up to `position + (last_bit + storage_element_size - 1) /
     storage_element_size'

   * the position of the component is interpreted relative to that
     machine scalar.

If no scalar storage order is specified for a type (either directly, or
by inheritance in the case of a derived type), then the default is
normally the native ordering of the target, but this default can be
overridden using pragma `Default_Scalar_Storage_Order'.

Note that the scalar storage order only affects the in-memory data
representation. It has no effect on the representation used by stream
attributes.


File: gnat_rm.info,  Node: Attribute Simple_Storage_Pool,  Next: Attribute Small,  Prev: Attribute Scalar_Storage_Order,  Up: Implementation Defined Attributes

4.54 Attribute Simple_Storage_Pool
==================================

For every nonformal, nonderived access-to-object type `Acc', the
representation attribute `Simple_Storage_Pool' may be specified via an
attribute_definition_clause (or by specifying the equivalent aspect):

    My_Pool : My_Simple_Storage_Pool_Type;

    type Acc is access My_Data_Type;

    for Acc'Simple_Storage_Pool use My_Pool;

The name given in an attribute_definition_clause for the
`Simple_Storage_Pool' attribute shall denote a variable of a 'simple
storage pool type' (see pragma `Simple_Storage_Pool_Type').

The use of this attribute is only allowed for a prefix denoting a type
for which it has been specified. The type of the attribute is the type
of the variable specified as the simple storage pool of the access type,
and the attribute denotes that variable.

It is illegal to specify both `Storage_Pool' and `Simple_Storage_Pool'
for the same access type.

If the `Simple_Storage_Pool' attribute has been specified for an access
type, then applying the `Storage_Pool' attribute to the type is flagged
with a warning and its evaluation raises the exception `Program_Error'.

If the Simple_Storage_Pool attribute has been specified for an access
type `S', then the evaluation of the attribute `S'Storage_Size' returns
the result of calling `Storage_Size (S'Simple_Storage_Pool)', which is
intended to indicate the number of storage elements reserved for the
simple storage pool. If the Storage_Size function has not been defined
for the simple storage pool type, then this attribute returns zero.

If an access type `S' has a specified simple storage pool of type
`SSP', then the evaluation of an allocator for that access type calls
the primitive `Allocate' procedure for type `SSP', passing
`S'Simple_Storage_Pool' as the pool parameter. The detailed semantics
of such allocators is the same as those defined for allocators in
section 13.11 of the `Ada Reference Manual', with the term `simple
storage pool' substituted for `storage pool'.

If an access type `S' has a specified simple storage pool of type
`SSP', then a call to an instance of the `Ada.Unchecked_Deallocation'
for that access type invokes the primitive `Deallocate' procedure for
type `SSP', passing `S'Simple_Storage_Pool' as the pool parameter. The
detailed semantics of such unchecked deallocations is the same as
defined in section 13.11.2 of the Ada Reference Manual, except that the
term 'simple storage pool' is substituted for 'storage pool'.


File: gnat_rm.info,  Node: Attribute Small,  Next: Attribute Storage_Unit,  Prev: Attribute Simple_Storage_Pool,  Up: Implementation Defined Attributes

4.55 Attribute Small
====================

The `Small' attribute is defined in Ada 95 (and Ada 2005) only for
fixed-point types.  GNAT also allows this attribute to be applied to
floating-point types for compatibility with Ada 83.  See the Ada 83
reference manual for an exact description of the semantics of this
attribute when applied to floating-point types.


File: gnat_rm.info,  Node: Attribute Storage_Unit,  Next: Attribute Stub_Type,  Prev: Attribute Small,  Up: Implementation Defined Attributes

4.56 Attribute Storage_Unit
===========================

`Standard'Storage_Unit' (`Standard' is the only permissible prefix)
provides the same value as `System.Storage_Unit'.


File: gnat_rm.info,  Node: Attribute Stub_Type,  Next: Attribute System_Allocator_Alignment,  Prev: Attribute Storage_Unit,  Up: Implementation Defined Attributes

4.57 Attribute Stub_Type
========================

The GNAT implementation of remote access-to-classwide types is
organized as described in AARM section E.4 (20.t): a value of an RACW
type (designating a remote object) is represented as a normal access
value, pointing to a "stub" object which in turn contains the necessary
information to contact the designated remote object. A call on any
dispatching operation of such a stub object does the remote call, if
necessary, using the information in the stub object to locate the
target partition, etc.

For a prefix `T' that denotes a remote access-to-classwide type,
`T'Stub_Type' denotes the type of the corresponding stub objects.

By construction, the layout of `T'Stub_Type' is identical to that of
type `RACW_Stub_Type' declared in the internal implementation-defined
unit `System.Partition_Interface'. Use of this attribute will create an
implicit dependency on this unit.


File: gnat_rm.info,  Node: Attribute System_Allocator_Alignment,  Next: Attribute Target_Name,  Prev: Attribute Stub_Type,  Up: Implementation Defined Attributes

4.58 Attribute System_Allocator_Alignment
=========================================

`Standard'System_Allocator_Alignment' (`Standard' is the only
permissible prefix) provides the observable guaranted to be honored by
the system allocator (malloc). This is a static value that can be used
in user storage pools based on malloc either to reject allocation with
alignment too large or to enable a realignment circuitry if the
alignment request is larger than this value.


File: gnat_rm.info,  Node: Attribute Target_Name,  Next: Attribute To_Address,  Prev: Attribute System_Allocator_Alignment,  Up: Implementation Defined Attributes

4.59 Attribute Target_Name
==========================

`Standard'Target_Name' (`Standard' is the only permissible prefix)
provides a static string value that identifies the target for the
current compilation. For GCC implementations, this is the standard gcc
target name without the terminating slash (for example, GNAT 5.0 on
windows yields "i586-pc-mingw32msv").


File: gnat_rm.info,  Node: Attribute To_Address,  Next: Attribute To_Any,  Prev: Attribute Target_Name,  Up: Implementation Defined Attributes

4.60 Attribute To_Address
=========================

The `System'To_Address' (`System' is the only permissible prefix)
denotes a function identical to `System.Storage_Elements.To_Address'
except that it is a static attribute.  This means that if its argument
is a static expression, then the result of the attribute is a static
expression.  This means that such an expression can be used in contexts
(e.g., preelaborable packages) which require a static expression and
where the function call could not be used (since the function call is
always non-static, even if its argument is static). The argument must
be in the range -(2**(m-1) .. 2**m-1, where m is the memory size
(typically 32 or 64). Negative values are intepreted in a modular
manner (e.g., -1 means the same as 16#FFFF_FFFF# on a 32 bits machine).


File: gnat_rm.info,  Node: Attribute To_Any,  Next: Attribute Type_Class,  Prev: Attribute To_Address,  Up: Implementation Defined Attributes

4.61 Attribute To_Any
=====================

This internal attribute is used for the generation of remote subprogram
stubs in the context of the Distributed Systems Annex.


File: gnat_rm.info,  Node: Attribute Type_Class,  Next: Attribute Type_Key,  Prev: Attribute To_Any,  Up: Implementation Defined Attributes

4.62 Attribute Type_Class
=========================

`type'Type_Class' for any type or subtype `type' yields the value of
the type class for the full type of `type'.  If `type' is a generic
formal type, the value is the value for the corresponding actual
subtype.  The value of this attribute is of type
`System.Aux_DEC.Type_Class', which has the following definition:

    type Type_Class is
      (Type_Class_Enumeration,
       Type_Class_Integer,
       Type_Class_Fixed_Point,
       Type_Class_Floating_Point,
       Type_Class_Array,
       Type_Class_Record,
       Type_Class_Access,
       Type_Class_Task,
       Type_Class_Address);

Protected types yield the value `Type_Class_Task', which thus applies
to all concurrent types.  This attribute is designed to be compatible
with the DEC Ada 83 attribute of the same name.


File: gnat_rm.info,  Node: Attribute Type_Key,  Next: Attribute TypeCode,  Prev: Attribute Type_Class,  Up: Implementation Defined Attributes

4.63 Attribute Type_Key
=======================

The `Type_Key' attribute is applicable to a type or subtype and yields
a value of type Standard.String containing encoded information about
the type or subtype. This provides improved compatibility with other
implementations that support this attribute.


File: gnat_rm.info,  Node: Attribute TypeCode,  Next: Attribute UET_Address,  Prev: Attribute Type_Key,  Up: Implementation Defined Attributes

4.64 Attribute TypeCode
=======================

This internal attribute is used for the generation of remote subprogram
stubs in the context of the Distributed Systems Annex.


File: gnat_rm.info,  Node: Attribute UET_Address,  Next: Attribute Unconstrained_Array,  Prev: Attribute TypeCode,  Up: Implementation Defined Attributes

4.65 Attribute UET_Address
==========================

The `UET_Address' attribute can only be used for a prefix which denotes
a library package.  It yields the address of the unit exception table
when zero cost exception handling is used.  This attribute is intended
only for use within the GNAT implementation.  See the unit
`Ada.Exceptions' in files `a-except.ads' and `a-except.adb' for details
on how this attribute is used in the implementation.


File: gnat_rm.info,  Node: Attribute Unconstrained_Array,  Next: Attribute Universal_Literal_String,  Prev: Attribute UET_Address,  Up: Implementation Defined Attributes

4.66 Attribute Unconstrained_Array
==================================

The `Unconstrained_Array' attribute can be used with a prefix that
denotes any type or subtype. It is a static attribute that yields
`True' if the prefix designates an unconstrained array, and `False'
otherwise. In a generic instance, the result is still static, and
yields the result of applying this test to the generic actual.


File: gnat_rm.info,  Node: Attribute Universal_Literal_String,  Next: Attribute Unrestricted_Access,  Prev: Attribute Unconstrained_Array,  Up: Implementation Defined Attributes

4.67 Attribute Universal_Literal_String
=======================================

The prefix of `Universal_Literal_String' must be a named number.  The
static result is the string consisting of the characters of the number
as defined in the original source.  This allows the user program to
access the actual text of named numbers without intermediate
conversions and without the need to enclose the strings in quotes (which
would preclude their use as numbers).

For example, the following program prints the first 50 digits of pi:

    with Text_IO; use Text_IO;
    with Ada.Numerics;
    procedure Pi is
    begin
       Put (Ada.Numerics.Pi'Universal_Literal_String);
    end;


File: gnat_rm.info,  Node: Attribute Unrestricted_Access,  Next: Attribute Update,  Prev: Attribute Universal_Literal_String,  Up: Implementation Defined Attributes

4.68 Attribute Unrestricted_Access
==================================

The `Unrestricted_Access' attribute is similar to `Access' except that
all accessibility and aliased view checks are omitted.  This is a
user-beware attribute.

For objects, it is similar to `Address', for which it is a desirable
replacement where the value desired is an access type.  In other words,
its effect is similar to first applying the `Address' attribute and
then doing an unchecked conversion to a desired access type.

For subprograms, `P'Unrestricted_Access' may be used where `P'Access'
would be illegal, to construct a value of a less-nested named access
type that designates a more-nested subprogram. This value may be used
in indirect calls, so long as the more-nested subprogram still exists;
once the subprogram containing it has returned, such calls are
erroneous. For example:

    package body P is

       type Less_Nested is not null access procedure;
       Global : Less_Nested;

       procedure P1 is
       begin
          Global.all;
       end P1;

       procedure P2 is
          Local_Var : Integer;

          procedure More_Nested is
          begin
             ... Local_Var ...
          end More_Nested;
       begin
          Global := More_Nested'Unrestricted_Access;
          P1;
       end P2;

    end P;

When P1 is called from P2, the call via Global is OK, but if P1 were
called after P2 returns, it would be an erroneous use of a dangling
pointer.

For objects, it is possible to use `Unrestricted_Access' for any type.
However, if the result is of an access-to-unconstrained array subtype,
then the resulting pointer has the same scope as the context of the
attribute, and must not be returned to some enclosing scope.  For
instance, if a function uses `Unrestricted_Access' to create an
access-to-unconstrained-array and returns that value to the caller, the
result will involve dangling pointers. In addition, it is only valid to
create pointers to unconstrained arrays using this attribute if the
pointer has the normal default 'fat' representation where a pointer has
two components, one points to the array and one points to the bounds.
If a size clause is used to force 'thin' representation for a pointer
to unconstrained where there is only space for a single pointer, then
the resulting pointer is not usable.

In the simple case where a direct use of Unrestricted_Access attempts
to make a thin pointer for a non-aliased object, the compiler will
reject the use as illegal, as shown in the following example:

    with System; use System;
    procedure SliceUA2 is
       type A is access all String;
       for A'Size use Standard'Address_Size;

       procedure P (Arg : A) is
       begin
          null;
       end P;

       X : String := "hello world!";
       X2 : aliased String := "hello world!";

       AV : A := X'Unrestricted_Access;    -- ERROR
                 |
    >>> illegal use of Unrestricted_Access attribute
    >>> attempt to generate thin pointer to unaliased object

    begin
       P (X'Unrestricted_Access);          -- ERROR
          |
    >>> illegal use of Unrestricted_Access attribute
    >>> attempt to generate thin pointer to unaliased object

       P (X(7 .. 12)'Unrestricted_Access); -- ERROR
          |
    >>> illegal use of Unrestricted_Access attribute
    >>> attempt to generate thin pointer to unaliased object

       P (X2'Unrestricted_Access);         -- OK
    end;

but other cases cannot be detected by the compiler, and are considered
to be erroneous. Consider the following example:

    with System; use System;
    with System; use System;
    procedure SliceUA is
       type AF is access all String;

       type A is access all String;
       for A'Size use Standard'Address_Size;

       procedure P (Arg : A) is
       begin
          if Arg'Length /= 6 then
             raise Program_Error;
          end if;
       end P;

       X : String := "hello world!";
       Y : AF := X (7 .. 12)'Unrestricted_Access;

    begin
       P (A (Y));
    end;

A normal unconstrained array value or a constrained array object marked
as aliased has the bounds in memory just before the array, so a thin
pointer can retrieve both the data and the bounds.  But in this case,
the non-aliased object `X' does not have the bounds before the string.
If the size clause for type `A' were not present, then the pointer
would be a fat pointer, where one component is a pointer to the bounds,
and all would be well.  But with the size clause present, the
conversion from fat pointer to thin pointer in the call loses the
bounds, and so this is erroneous, and the program likely raises a
`Program_Error' exception.

In general, it is advisable to completely avoid mixing the use of thin
pointers and the use of `Unrestricted_Access' where the designated type
is an unconstrained array.  The use of thin pointers should be
restricted to cases of porting legacy code that implicitly assumes the
size of pointers, and such code should not in any case be using this
attribute.

Another erroneous situation arises if the attribute is applied to a
constant. The resulting pointer can be used to access the constant, but
the effect of trying to modify a constant in this manner is not
well-defined. Consider this example:

    P : constant Integer := 4;
    type R is access all Integer;
    RV : R := P'Unrestricted_Access;
    ..
    RV.all := 3;

Here we attempt to modify the constant P from 4 to 3, but the compiler
may or may not notice this attempt, and subsequent references to P may
yield either the value 3 or the value 4 or the assignment may blow up
if the compiler decides to put P in read-only memory. One particular
case where `Unrestricted_Access' can be used in this way is to modify
the value of an `IN' parameter:

    procedure K (S : in String) is
       type R is access all Character;
       RV : R := S (3)'Unrestricted_Access;
    begin
       RV.all := 'a';
    end;

In general this is a risky approach. It may appear to "work" but such
uses of `Unrestricted_Access' are potentially non-portable, even from
one version of `GNAT' to another, so are best avoided if possible.


File: gnat_rm.info,  Node: Attribute Update,  Next: Attribute Valid_Scalars,  Prev: Attribute Unrestricted_Access,  Up: Implementation Defined Attributes

4.69 Attribute Update
=====================

The `Update' attribute creates a copy of an array or record value with
one or more modified components. The syntax is:

    PREFIX'Update ( RECORD_COMPONENT_ASSOCIATION_LIST )
    PREFIX'Update ( ARRAY_COMPONENT_ASSOCIATION {, ARRAY_COMPONENT_ASSOCIATION } )
    PREFIX'Update ( MULTIDIMENSIONAL_ARRAY_COMPONENT_ASSOCIATION
                    {, MULTIDIMENSIONAL_ARRAY_COMPONENT_ASSOCIATION } )

    MULTIDIMENSIONAL_ARRAY_COMPONENT_ASSOCIATION ::= INDEX_EXPRESSION_LIST_LIST => EXPRESSION
    INDEX_EXPRESSION_LIST_LIST                   ::= INDEX_EXPRESSION_LIST {| INDEX_EXPRESSION_LIST }
    INDEX_EXPRESSION_LIST                        ::= ( EXPRESSION {, EXPRESSION } )

where `PREFIX' is the name of an array or record object, the
association list in parentheses does not contain an `others' choice and
the box symbol `<>' may not appear in any expression. The effect is to
yield a copy of the array or record value which is unchanged apart from
the components mentioned in the association list, which are changed to
the indicated value. The original value of the array or record value is
not affected. For example:

    type Arr is Array (1 .. 5) of Integer;
    ...
    Avar1 : Arr := (1,2,3,4,5);
    Avar2 : Arr := Avar1'Update (2 => 10, 3 .. 4 => 20);

yields a value for `Avar2' of 1,10,20,20,5 with `Avar1' begin
unmodified. Similarly:

    type Rec is A, B, C : Integer;
    ...
    Rvar1 : Rec := (A => 1, B => 2, C => 3);
    Rvar2 : Rec := Rvar1'Update (B => 20);

yields a value for `Rvar2' of (A => 1, B => 20, C => 3), with `Rvar1'
being unmodifed.  Note that the value of the attribute reference is
computed completely before it is used. This means that if you write:

    Avar1 := Avar1'Update (1 => 10, 2 => Function_Call);

then the value of `Avar1' is not modified if `Function_Call' raises an
exception, unlike the effect of a series of direct assignments to
elements of `Avar1'. In general this requires that two extra complete
copies of the object are required, which should be kept in mind when
considering efficiency.

The `Update' attribute cannot be applied to prefixes of a limited type,
and cannot reference discriminants in the case of a record type.  The
accessibility level of an Update attribute result object is defined as
for an aggregate.

In the record case, no component can be mentioned more than once. In
the array case, two overlapping ranges can appear in the association
list, in which case the modifications are processed left to right.

Multi-dimensional arrays can be modified, as shown by this example:

    A : array (1 .. 10, 1 .. 10) of Integer;
    ..
    A := A'Update ((1, 2) => 20, (3, 4) => 30);

which changes element (1,2) to 20 and (3,4) to 30.


File: gnat_rm.info,  Node: Attribute Valid_Scalars,  Next: Attribute VADS_Size,  Prev: Attribute Update,  Up: Implementation Defined Attributes

4.70 Attribute Valid_Scalars
============================

The `'Valid_Scalars' attribute is intended to make it easier to check
the validity of scalar subcomponents of composite objects. It is
defined for any prefix `X' that denotes an object.  The value of this
attribute is of the predefined type Boolean.  `X'Valid_Scalars' yields
True if and only if evaluation of `P'Valid' yields True for every
scalar part P of X or if X has no scalar parts. It is not specified in
what order the scalar parts are checked, nor whether any more are
checked after any one of them is determined to be invalid. If the
prefix `X' is of a class-wide type `T'Class' (where `T' is the
associated specific type), or if the prefix `X' is of a specific tagged
type `T', then only the scalar parts of components of `T' are
traversed; in other words, components of extensions of `T' are not
traversed even if `T'Class (X)'Tag /= T'Tag' . The compiler will issue
a warning if it can be determined at compile time that the prefix of
the attribute has no scalar parts (e.g., if the prefix is of an access
type, an interface type, an undiscriminated task type, or an
undiscriminated protected type).

For scalar types, `Valid_Scalars' is equivalent to `Valid'. The use of
this attribute is not permitted for `Unchecked_Union' types for which
in general it is not possible to determine the values of the
discriminants.

Note: `Valid_Scalars' can generate a lot of code, especially in the case
of a large variant record. If the attribute is called in many places in
the same program applied to objects of the same type, it can reduce
program size to write a function with a single use of the attribute,
and then call that function from multiple places.


File: gnat_rm.info,  Node: Attribute VADS_Size,  Next: Attribute Value_Size,  Prev: Attribute Valid_Scalars,  Up: Implementation Defined Attributes

4.71 Attribute VADS_Size
========================

The `'VADS_Size' attribute is intended to make it easier to port legacy
code which relies on the semantics of `'Size' as implemented by the
VADS Ada 83 compiler.  GNAT makes a best effort at duplicating the same
semantic interpretation.  In particular, `'VADS_Size' applied to a
predefined or other primitive type with no Size clause yields the
Object_Size (for example, `Natural'Size' is 32 rather than 31 on
typical machines).  In addition `'VADS_Size' applied to an object gives
the result that would be obtained by applying the attribute to the
corresponding type.


File: gnat_rm.info,  Node: Attribute Value_Size,  Next: Attribute Wchar_T_Size,  Prev: Attribute VADS_Size,  Up: Implementation Defined Attributes

4.72 Attribute Value_Size
=========================

`type'Value_Size' is the number of bits required to represent a value
of the given subtype.  It is the same as `type'Size', but, unlike
`Size', may be set for non-first subtypes.


File: gnat_rm.info,  Node: Attribute Wchar_T_Size,  Next: Attribute Word_Size,  Prev: Attribute Value_Size,  Up: Implementation Defined Attributes

4.73 Attribute Wchar_T_Size
===========================

`Standard'Wchar_T_Size' (`Standard' is the only permissible prefix)
provides the size in bits of the C `wchar_t' type primarily for
constructing the definition of this type in package `Interfaces.C'. The
result is a static constant.


File: gnat_rm.info,  Node: Attribute Word_Size,  Prev: Attribute Wchar_T_Size,  Up: Implementation Defined Attributes

4.74 Attribute Word_Size
========================

`Standard'Word_Size' (`Standard' is the only permissible prefix)
provides the value `System.Word_Size'. The result is a static constant.


File: gnat_rm.info,  Node: Standard and Implementation Defined Restrictions,  Next: Implementation Advice,  Prev: Implementation Defined Attributes,  Up: Top

5 Standard and Implementation Defined Restrictions
**************************************************

All Ada Reference Manual-defined Restriction identifiers are
implemented:

   * language-defined restrictions (see 13.12.1)

   * tasking restrictions (see D.7)

   * high integrity restrictions (see H.4)

GNAT implements additional restriction identifiers. All restrictions,
whether language defined or GNAT-specific, are listed in the following.

* Menu:

* Partition-Wide Restrictions::
* Program Unit Level Restrictions::


File: gnat_rm.info,  Node: Partition-Wide Restrictions,  Next: Program Unit Level Restrictions,  Up: Standard and Implementation Defined Restrictions

5.1 Partition-Wide Restrictions
===============================

There are two separate lists of restriction identifiers. The first set
requires consistency throughout a partition (in other words, if the
restriction identifier is used for any compilation unit in the
partition, then all compilation units in the partition must obey the
restriction).

* Menu:

* Immediate_Reclamation::
* Max_Asynchronous_Select_Nesting::
* Max_Entry_Queue_Length::
* Max_Protected_Entries::
* Max_Select_Alternatives::
* Max_Storage_At_Blocking::
* Max_Task_Entries::
* Max_Tasks::
* No_Abort_Statements::
* No_Access_Parameter_Allocators::
* No_Access_Subprograms::
* No_Allocators::
* No_Anonymous_Allocators::
* No_Calendar::
* No_Coextensions::
* No_Default_Initialization::
* No_Delay::
* No_Dependence::
* No_Direct_Boolean_Operators::
* No_Dispatch::
* No_Dispatching_Calls::
* No_Dynamic_Attachment::
* No_Dynamic_Priorities::
* No_Entry_Calls_In_Elaboration_Code::
* No_Enumeration_Maps::
* No_Exception_Handlers::
* No_Exception_Propagation::
* No_Exception_Registration::
* No_Exceptions::
* No_Finalization::
* No_Fixed_Point::
* No_Floating_Point::
* No_Implicit_Conditionals::
* No_Implicit_Dynamic_Code::
* No_Implicit_Heap_Allocations::
* No_Implicit_Loops::
* No_Initialize_Scalars::
* No_IO::
* No_Local_Allocators::
* No_Local_Protected_Objects::
* No_Local_Timing_Events::
* No_Long_Long_Integers::
* No_Multiple_Elaboration::
* No_Nested_Finalization::
* No_Protected_Type_Allocators::
* No_Protected_Types::
* No_Recursion::
* No_Reentrancy::
* No_Relative_Delay::
* No_Requeue_Statements::
* No_Secondary_Stack::
* No_Select_Statements::
* No_Specific_Termination_Handlers::
* No_Specification_of_Aspect::
* No_Standard_Allocators_After_Elaboration::
* No_Standard_Storage_Pools::
* No_Stream_Optimizations::
* No_Streams::
* No_Task_Allocators::
* No_Task_Attributes_Package::
* No_Task_Hierarchy::
* No_Task_Termination::
* No_Tasking::
* No_Terminate_Alternatives::
* No_Unchecked_Access::
* No_Use_Of_Entity::
* Simple_Barriers::
* Static_Priorities::
* Static_Storage_Size::


File: gnat_rm.info,  Node: Immediate_Reclamation,  Next: Max_Asynchronous_Select_Nesting,  Up: Partition-Wide Restrictions

5.1.1 Immediate_Reclamation
---------------------------

[RM H.4] This restriction ensures that, except for storage occupied by
objects created by allocators and not deallocated via unchecked
deallocation, any storage reserved at run time for an object is
immediately reclaimed when the object no longer exists.


File: gnat_rm.info,  Node: Max_Asynchronous_Select_Nesting,  Next: Max_Entry_Queue_Length,  Prev: Immediate_Reclamation,  Up: Partition-Wide Restrictions

5.1.2 Max_Asynchronous_Select_Nesting
-------------------------------------

[RM D.7] Specifies the maximum dynamic nesting level of asynchronous
selects. Violations of this restriction with a value of zero are
detected at compile time. Violations of this restriction with values
other than zero cause Storage_Error to be raised.


File: gnat_rm.info,  Node: Max_Entry_Queue_Length,  Next: Max_Protected_Entries,  Prev: Max_Asynchronous_Select_Nesting,  Up: Partition-Wide Restrictions

5.1.3 Max_Entry_Queue_Length
----------------------------

[RM D.7] This restriction is a declaration that any protected entry
compiled in the scope of the restriction has at most the specified
number of tasks waiting on the entry at any one time, and so no queue
is required.  Note that this restriction is checked at run time.
Violation of this restriction results in the raising of Program_Error
exception at the point of the call.

The restriction `Max_Entry_Queue_Depth' is recognized as a synonym for
`Max_Entry_Queue_Length'. This is retained for historical compatibility
purposes (and a warning will be generated for its use if warnings on
obsolescent features are activated).


File: gnat_rm.info,  Node: Max_Protected_Entries,  Next: Max_Select_Alternatives,  Prev: Max_Entry_Queue_Length,  Up: Partition-Wide Restrictions

5.1.4 Max_Protected_Entries
---------------------------

[RM D.7] Specifies the maximum number of entries per protected type. The
bounds of every entry family of a protected unit shall be static, or
shall be defined by a discriminant of a subtype whose corresponding
bound is static.


File: gnat_rm.info,  Node: Max_Select_Alternatives,  Next: Max_Storage_At_Blocking,  Prev: Max_Protected_Entries,  Up: Partition-Wide Restrictions

5.1.5 Max_Select_Alternatives
-----------------------------

[RM D.7] Specifies the maximum number of alternatives in a selective
accept.


File: gnat_rm.info,  Node: Max_Storage_At_Blocking,  Next: Max_Task_Entries,  Prev: Max_Select_Alternatives,  Up: Partition-Wide Restrictions

5.1.6 Max_Storage_At_Blocking
-----------------------------

[RM D.7] Specifies the maximum portion (in storage elements) of a task's
Storage_Size that can be retained by a blocked task. A violation of this
restriction causes Storage_Error to be raised.


File: gnat_rm.info,  Node: Max_Task_Entries,  Next: Max_Tasks,  Prev: Max_Storage_At_Blocking,  Up: Partition-Wide Restrictions

5.1.7 Max_Task_Entries
----------------------

[RM D.7] Specifies the maximum number of entries per task.  The bounds
of every entry family of a task unit shall be static, or shall be
defined by a discriminant of a subtype whose corresponding bound is
static.


File: gnat_rm.info,  Node: Max_Tasks,  Next: No_Abort_Statements,  Prev: Max_Task_Entries,  Up: Partition-Wide Restrictions

5.1.8 Max_Tasks
---------------

[RM D.7] Specifies the maximum number of task that may be created, not
counting the creation of the environment task.  Violations of this
restriction with a value of zero are detected at compile time.
Violations of this restriction with values other than zero cause
Storage_Error to be raised.


File: gnat_rm.info,  Node: No_Abort_Statements,  Next: No_Access_Parameter_Allocators,  Prev: Max_Tasks,  Up: Partition-Wide Restrictions

5.1.9 No_Abort_Statements
-------------------------

[RM D.7] There are no abort_statements, and there are no calls to
Task_Identification.Abort_Task.


File: gnat_rm.info,  Node: No_Access_Parameter_Allocators,  Next: No_Access_Subprograms,  Prev: No_Abort_Statements,  Up: Partition-Wide Restrictions

5.1.10 No_Access_Parameter_Allocators
-------------------------------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of an allocator as the actual parameter to an access
parameter.


File: gnat_rm.info,  Node: No_Access_Subprograms,  Next: No_Allocators,  Prev: No_Access_Parameter_Allocators,  Up: Partition-Wide Restrictions

5.1.11 No_Access_Subprograms
----------------------------

[RM H.4] This restriction ensures at compile time that there are no
declarations of access-to-subprogram types.


File: gnat_rm.info,  Node: No_Allocators,  Next: No_Anonymous_Allocators,  Prev: No_Access_Subprograms,  Up: Partition-Wide Restrictions

5.1.12 No_Allocators
--------------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of an allocator.


File: gnat_rm.info,  Node: No_Anonymous_Allocators,  Next: No_Calendar,  Prev: No_Allocators,  Up: Partition-Wide Restrictions

5.1.13 No_Anonymous_Allocators
------------------------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of an allocator of anonymous access type.


File: gnat_rm.info,  Node: No_Calendar,  Next: No_Coextensions,  Prev: No_Anonymous_Allocators,  Up: Partition-Wide Restrictions

5.1.14 No_Calendar
------------------

[GNAT] This restriction ensures at compile time that there is no
implicit or explicit dependence on the package `Ada.Calendar'.


File: gnat_rm.info,  Node: No_Coextensions,  Next: No_Default_Initialization,  Prev: No_Calendar,  Up: Partition-Wide Restrictions

5.1.15 No_Coextensions
----------------------

[RM H.4] This restriction ensures at compile time that there are no
coextensions. See 3.10.2.


File: gnat_rm.info,  Node: No_Default_Initialization,  Next: No_Delay,  Prev: No_Coextensions,  Up: Partition-Wide Restrictions

5.1.16 No_Default_Initialization
--------------------------------

[GNAT] This restriction prohibits any instance of default initialization
of variables.  The binder implements a consistency rule which prevents
any unit compiled without the restriction from with'ing a unit with the
restriction (this allows the generation of initialization procedures to
be skipped, since you can be sure that no call is ever generated to an
initialization procedure in a unit with the restriction active). If used
in conjunction with Initialize_Scalars or Normalize_Scalars, the effect
is to prohibit all cases of variables declared without a specific
initializer (including the case of OUT scalar parameters).


File: gnat_rm.info,  Node: No_Delay,  Next: No_Dependence,  Prev: No_Default_Initialization,  Up: Partition-Wide Restrictions

5.1.17 No_Delay
---------------

[RM H.4] This restriction ensures at compile time that there are no
delay statements and no dependences on package Calendar.


File: gnat_rm.info,  Node: No_Dependence,  Next: No_Direct_Boolean_Operators,  Prev: No_Delay,  Up: Partition-Wide Restrictions

5.1.18 No_Dependence
--------------------

[RM 13.12.1] This restriction checks at compile time that there are no
dependence on a library unit.


File: gnat_rm.info,  Node: No_Direct_Boolean_Operators,  Next: No_Dispatch,  Prev: No_Dependence,  Up: Partition-Wide Restrictions

5.1.19 No_Direct_Boolean_Operators
----------------------------------

[GNAT] This restriction ensures that no logical operators (and/or/xor)
are used on operands of type Boolean (or any type derived from Boolean).
This is intended for use in safety critical programs where the
certification protocol requires the use of short-circuit (and then, or
else) forms for all composite boolean operations.


File: gnat_rm.info,  Node: No_Dispatch,  Next: No_Dispatching_Calls,  Prev: No_Direct_Boolean_Operators,  Up: Partition-Wide Restrictions

5.1.20 No_Dispatch
------------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of `T'Class', for any (tagged) subtype `T'.


File: gnat_rm.info,  Node: No_Dispatching_Calls,  Next: No_Dynamic_Attachment,  Prev: No_Dispatch,  Up: Partition-Wide Restrictions

5.1.21 No_Dispatching_Calls
---------------------------

[GNAT] This restriction ensures at compile time that the code generated
by the compiler involves no dispatching calls. The use of this
restriction allows the safe use of record extensions, classwide
membership tests and other classwide features not involving implicit
dispatching. This restriction ensures that the code contains no
indirect calls through a dispatching mechanism. Note that this includes
internally-generated calls created by the compiler, for example in the
implementation of class-wide objects assignments. The membership test
is allowed in the presence of this restriction, because its
implementation requires no dispatching.  This restriction is comparable
to the official Ada restriction `No_Dispatch' except that it is a bit
less restrictive in that it allows all classwide constructs that do not
imply dispatching.  The following example indicates constructs that
violate this restriction.

    package Pkg is
      type T is tagged record
        Data : Natural;
      end record;
      procedure P (X : T);

      type DT is new T with record
        More_Data : Natural;
      end record;
      procedure Q (X : DT);
    end Pkg;

    with Pkg; use Pkg;
    procedure Example is
      procedure Test (O : T'Class) is
        N : Natural  := O'Size;--  Error: Dispatching call
        C : T'Class := O;      --  Error: implicit Dispatching Call
      begin
        if O in DT'Class then  --  OK   : Membership test
           Q (DT (O));         --  OK   : Type conversion plus direct call
        else
           P (O);              --  Error: Dispatching call
        end if;
      end Test;

      Obj : DT;
    begin
      P (Obj);                 --  OK   : Direct call
      P (T (Obj));             --  OK   : Type conversion plus direct call
      P (T'Class (Obj));       --  Error: Dispatching call

      Test (Obj);              --  OK   : Type conversion

      if Obj in T'Class then   --  OK   : Membership test
         null;
      end if;
    end Example;


File: gnat_rm.info,  Node: No_Dynamic_Attachment,  Next: No_Dynamic_Priorities,  Prev: No_Dispatching_Calls,  Up: Partition-Wide Restrictions

5.1.22 No_Dynamic_Attachment
----------------------------

[RM D.7] This restriction ensures that there is no call to any of the
operations defined in package Ada.Interrupts (Is_Reserved, Is_Attached,
Current_Handler, Attach_Handler, Exchange_Handler, Detach_Handler, and
Reference).

The restriction `No_Dynamic_Interrupts' is recognized as a synonym for
`No_Dynamic_Attachment'. This is retained for historical compatibility
purposes (and a warning will be generated for its use if warnings on
obsolescent features are activated).


File: gnat_rm.info,  Node: No_Dynamic_Priorities,  Next: No_Entry_Calls_In_Elaboration_Code,  Prev: No_Dynamic_Attachment,  Up: Partition-Wide Restrictions

5.1.23 No_Dynamic_Priorities
----------------------------

[RM D.7] There are no semantic dependencies on the package
Dynamic_Priorities.


File: gnat_rm.info,  Node: No_Entry_Calls_In_Elaboration_Code,  Next: No_Enumeration_Maps,  Prev: No_Dynamic_Priorities,  Up: Partition-Wide Restrictions

5.1.24 No_Entry_Calls_In_Elaboration_Code
-----------------------------------------

[GNAT] This restriction ensures at compile time that no task or
protected entry calls are made during elaboration code.  As a result of
the use of this restriction, the compiler can assume that no code past
an accept statement in a task can be executed at elaboration time.


File: gnat_rm.info,  Node: No_Enumeration_Maps,  Next: No_Exception_Handlers,  Prev: No_Entry_Calls_In_Elaboration_Code,  Up: Partition-Wide Restrictions

5.1.25 No_Enumeration_Maps
--------------------------

[GNAT] This restriction ensures at compile time that no operations
requiring enumeration maps are used (that is Image and Value attributes
applied to enumeration types).


File: gnat_rm.info,  Node: No_Exception_Handlers,  Next: No_Exception_Propagation,  Prev: No_Enumeration_Maps,  Up: Partition-Wide Restrictions

5.1.26 No_Exception_Handlers
----------------------------

[GNAT] This restriction ensures at compile time that there are no
explicit exception handlers. It also indicates that no exception
propagation will be provided. In this mode, exceptions may be raised
but will result in an immediate call to the last chance handler, a
routine that the user must define with the following profile:

    procedure Last_Chance_Handler
      (Source_Location : System.Address; Line : Integer);
    pragma Export (C, Last_Chance_Handler,
                   "__gnat_last_chance_handler");

The parameter is a C null-terminated string representing a message to be
associated with the exception (typically the source location of the
raise statement generated by the compiler). The Line parameter when
nonzero represents the line number in the source program where the
raise occurs.


File: gnat_rm.info,  Node: No_Exception_Propagation,  Next: No_Exception_Registration,  Prev: No_Exception_Handlers,  Up: Partition-Wide Restrictions

5.1.27 No_Exception_Propagation
-------------------------------

[GNAT] This restriction guarantees that exceptions are never propagated
to an outer subprogram scope. The only case in which an exception may
be raised is when the handler is statically in the same subprogram, so
that the effect of a raise is essentially like a goto statement. Any
other raise statement (implicit or explicit) will be considered
unhandled. Exception handlers are allowed, but may not contain an
exception occurrence identifier (exception choice). In addition, use of
the package GNAT.Current_Exception is not permitted, and reraise
statements (raise with no operand) are not permitted.


File: gnat_rm.info,  Node: No_Exception_Registration,  Next: No_Exceptions,  Prev: No_Exception_Propagation,  Up: Partition-Wide Restrictions

5.1.28 No_Exception_Registration
--------------------------------

[GNAT] This restriction ensures at compile time that no stream
operations for types Exception_Id or Exception_Occurrence are used.
This also makes it impossible to pass exceptions to or from a partition
with this restriction in a distributed environment. If this restriction
is active, the generated code is simplified by omitting the
otherwise-required global registration of exceptions when they are
declared.


File: gnat_rm.info,  Node: No_Exceptions,  Next: No_Finalization,  Prev: No_Exception_Registration,  Up: Partition-Wide Restrictions

5.1.29 No_Exceptions
--------------------

[RM H.4] This restriction ensures at compile time that there are no
raise statements and no exception handlers.


File: gnat_rm.info,  Node: No_Finalization,  Next: No_Fixed_Point,  Prev: No_Exceptions,  Up: Partition-Wide Restrictions

5.1.30 No_Finalization
----------------------

[GNAT] This restriction disables the language features described in
chapter 7.6 of the Ada 2005 RM as well as all form of code generation
performed by the compiler to support these features. The following types
are no longer considered controlled when this restriction is in effect:

   * `Ada.Finalization.Controlled'

   * `Ada.Finalization.Limited_Controlled'

   * Derivations from `Controlled' or `Limited_Controlled'

   * Class-wide types

   * Protected types

   * Task types

   * Array and record types with controlled components

The compiler no longer generates code to initialize, finalize or adjust
an object or a nested component, either declared on the stack or on the
heap. The deallocation of a controlled object no longer finalizes its
contents.


File: gnat_rm.info,  Node: No_Fixed_Point,  Next: No_Floating_Point,  Prev: No_Finalization,  Up: Partition-Wide Restrictions

5.1.31 No_Fixed_Point
---------------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of fixed point types and operations.


File: gnat_rm.info,  Node: No_Floating_Point,  Next: No_Implicit_Conditionals,  Prev: No_Fixed_Point,  Up: Partition-Wide Restrictions

5.1.32 No_Floating_Point
------------------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of floating point types and operations.


File: gnat_rm.info,  Node: No_Implicit_Conditionals,  Next: No_Implicit_Dynamic_Code,  Prev: No_Floating_Point,  Up: Partition-Wide Restrictions

5.1.33 No_Implicit_Conditionals
-------------------------------

[GNAT] This restriction ensures that the generated code does not
contain any implicit conditionals, either by modifying the generated
code where possible, or by rejecting any construct that would otherwise
generate an implicit conditional. Note that this check does not include
run time constraint checks, which on some targets may generate implicit
conditionals as well. To control the latter, constraint checks can be
suppressed in the normal manner. Constructs generating implicit
conditionals include comparisons of composite objects and the Max/Min
attributes.


File: gnat_rm.info,  Node: No_Implicit_Dynamic_Code,  Next: No_Implicit_Heap_Allocations,  Prev: No_Implicit_Conditionals,  Up: Partition-Wide Restrictions

5.1.34 No_Implicit_Dynamic_Code
-------------------------------

[GNAT] This restriction prevents the compiler from building
'trampolines'.  This is a structure that is built on the stack and
contains dynamic code to be executed at run time. On some targets, a
trampoline is built for the following features: `Access',
`Unrestricted_Access', or `Address' of a nested subprogram; nested task
bodies; primitive operations of nested tagged types.  Trampolines do
not work on machines that prevent execution of stack data. For example,
on windows systems, enabling DEP (data execution protection) will cause
trampolines to raise an exception.  Trampolines are also quite slow at
run time.

On many targets, trampolines have been largely eliminated. Look at the
version of system.ads for your target -- if it has
Always_Compatible_Rep equal to False, then trampolines are largely
eliminated. In particular, a trampoline is built for the following
features: `Address' of a nested subprogram; `Access' or
`Unrestricted_Access' of a nested subprogram, but only if pragma
Favor_Top_Level applies, or the access type has a foreign-language
convention; primitive operations of nested tagged types.


File: gnat_rm.info,  Node: No_Implicit_Heap_Allocations,  Next: No_Implicit_Loops,  Prev: No_Implicit_Dynamic_Code,  Up: Partition-Wide Restrictions

5.1.35 No_Implicit_Heap_Allocations
-----------------------------------

[RM D.7] No constructs are allowed to cause implicit heap allocation.


File: gnat_rm.info,  Node: No_Implicit_Loops,  Next: No_Initialize_Scalars,  Prev: No_Implicit_Heap_Allocations,  Up: Partition-Wide Restrictions

5.1.36 No_Implicit_Loops
------------------------

[GNAT] This restriction ensures that the generated code does not
contain any implicit `for' loops, either by modifying the generated
code where possible, or by rejecting any construct that would otherwise
generate an implicit `for' loop. If this restriction is active, it is
possible to build large array aggregates with all static components
without generating an intermediate temporary, and without generating a
loop to initialize individual components. Otherwise, a loop is created
for arrays larger than about 5000 scalar components.


File: gnat_rm.info,  Node: No_Initialize_Scalars,  Next: No_IO,  Prev: No_Implicit_Loops,  Up: Partition-Wide Restrictions

5.1.37 No_Initialize_Scalars
----------------------------

[GNAT] This restriction ensures that no unit in the partition is
compiled with pragma Initialize_Scalars. This allows the generation of
more efficient code, and in particular eliminates dummy null
initialization routines that are otherwise generated for some record
and array types.


File: gnat_rm.info,  Node: No_IO,  Next: No_Local_Allocators,  Prev: No_Initialize_Scalars,  Up: Partition-Wide Restrictions

5.1.38 No_IO
------------

[RM H.4] This restriction ensures at compile time that there are no
dependences on any of the library units Sequential_IO, Direct_IO,
Text_IO, Wide_Text_IO, Wide_Wide_Text_IO, or Stream_IO.


File: gnat_rm.info,  Node: No_Local_Allocators,  Next: No_Local_Protected_Objects,  Prev: No_IO,  Up: Partition-Wide Restrictions

5.1.39 No_Local_Allocators
--------------------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of an allocator in subprograms, generic subprograms, tasks,
and entry bodies.


File: gnat_rm.info,  Node: No_Local_Protected_Objects,  Next: No_Local_Timing_Events,  Prev: No_Local_Allocators,  Up: Partition-Wide Restrictions

5.1.40 No_Local_Protected_Objects
---------------------------------

[RM D.7] This restriction ensures at compile time that protected
objects are only declared at the library level.


File: gnat_rm.info,  Node: No_Local_Timing_Events,  Next: No_Long_Long_Integers,  Prev: No_Local_Protected_Objects,  Up: Partition-Wide Restrictions

5.1.41 No_Local_Timing_Events
-----------------------------

[RM D.7] All objects of type Ada.Timing_Events.Timing_Event are
declared at the library level.


File: gnat_rm.info,  Node: No_Long_Long_Integers,  Next: No_Multiple_Elaboration,  Prev: No_Local_Timing_Events,  Up: Partition-Wide Restrictions

5.1.42 No_Long_Long_Integers
----------------------------

[GNAT] This partition-wide restriction forbids any explicit reference to
type Standard.Long_Long_Integer, and also forbids declaring range types
whose implicit base type is Long_Long_Integer, and modular types whose
size exceeds Long_Integer'Size.


File: gnat_rm.info,  Node: No_Multiple_Elaboration,  Next: No_Nested_Finalization,  Prev: No_Long_Long_Integers,  Up: Partition-Wide Restrictions

5.1.43 No_Multiple_Elaboration
------------------------------

[GNAT] Normally each package contains a 16-bit counter used to check
for access before elaboration, and to control multiple elaboration
attempts.  This counter is eliminated for units compiled with the
static model of elaboration if restriction `No_Elaboration_Code' is
active but because of the need to check for multiple elaboration in the
general case, these counters cannot be eliminated if elaboration code
may be present. The restriction `No_Multiple_Elaboration' allows
suppression of these counters in static elaboration units even if they
do have elaboration code. If this restriction is used, then the
situations in which multiple elaboration is possible, including non-Ada
main programs, and Stand Alone libraries, are not permitted, and will
be diagnosed by the binder.


File: gnat_rm.info,  Node: No_Nested_Finalization,  Next: No_Protected_Type_Allocators,  Prev: No_Multiple_Elaboration,  Up: Partition-Wide Restrictions

5.1.44 No_Nested_Finalization
-----------------------------

[RM D.7] All objects requiring finalization are declared at the library
level.


File: gnat_rm.info,  Node: No_Protected_Type_Allocators,  Next: No_Protected_Types,  Prev: No_Nested_Finalization,  Up: Partition-Wide Restrictions

5.1.45 No_Protected_Type_Allocators
-----------------------------------

[RM D.7] This restriction ensures at compile time that there are no
allocator expressions that attempt to allocate protected objects.


File: gnat_rm.info,  Node: No_Protected_Types,  Next: No_Recursion,  Prev: No_Protected_Type_Allocators,  Up: Partition-Wide Restrictions

5.1.46 No_Protected_Types
-------------------------

[RM H.4] This restriction ensures at compile time that there are no
declarations of protected types or protected objects.


File: gnat_rm.info,  Node: No_Recursion,  Next: No_Reentrancy,  Prev: No_Protected_Types,  Up: Partition-Wide Restrictions

5.1.47 No_Recursion
-------------------

[RM H.4] A program execution is erroneous if a subprogram is invoked as
part of its execution.


File: gnat_rm.info,  Node: No_Reentrancy,  Next: No_Relative_Delay,  Prev: No_Recursion,  Up: Partition-Wide Restrictions

5.1.48 No_Reentrancy
--------------------

[RM H.4] A program execution is erroneous if a subprogram is executed by
two tasks at the same time.


File: gnat_rm.info,  Node: No_Relative_Delay,  Next: No_Requeue_Statements,  Prev: No_Reentrancy,  Up: Partition-Wide Restrictions

5.1.49 No_Relative_Delay
------------------------

[RM D.7] This restriction ensures at compile time that there are no
delay relative statements and prevents expressions such as `delay
1.23;' from appearing in source code.


File: gnat_rm.info,  Node: No_Requeue_Statements,  Next: No_Secondary_Stack,  Prev: No_Relative_Delay,  Up: Partition-Wide Restrictions

5.1.50 No_Requeue_Statements
----------------------------

[RM D.7] This restriction ensures at compile time that no requeue
statements are permitted and prevents keyword `requeue' from being used
in source code.

The restriction `No_Requeue' is recognized as a synonym for
`No_Requeue_Statements'. This is retained for historical compatibility
purposes (and a warning will be generated for its use if warnings on
oNobsolescent features are activated).


File: gnat_rm.info,  Node: No_Secondary_Stack,  Next: No_Select_Statements,  Prev: No_Requeue_Statements,  Up: Partition-Wide Restrictions

5.1.51 No_Secondary_Stack
-------------------------

[GNAT] This restriction ensures at compile time that the generated code
does not contain any reference to the secondary stack.  The secondary
stack is used to implement functions returning unconstrained objects
(arrays or records) on some targets.


File: gnat_rm.info,  Node: No_Select_Statements,  Next: No_Specific_Termination_Handlers,  Prev: No_Secondary_Stack,  Up: Partition-Wide Restrictions

5.1.52 No_Select_Statements
---------------------------

[RM D.7] This restriction ensures at compile time no select statements
of any kind are permitted, that is the keyword `select' may not appear.


File: gnat_rm.info,  Node: No_Specific_Termination_Handlers,  Next: No_Specification_of_Aspect,  Prev: No_Select_Statements,  Up: Partition-Wide Restrictions

5.1.53 No_Specific_Termination_Handlers
---------------------------------------

[RM D.7] There are no calls to Ada.Task_Termination.Set_Specific_Handler
or to Ada.Task_Termination.Specific_Handler.


File: gnat_rm.info,  Node: No_Specification_of_Aspect,  Next: No_Standard_Allocators_After_Elaboration,  Prev: No_Specific_Termination_Handlers,  Up: Partition-Wide Restrictions

5.1.54 No_Specification_of_Aspect
---------------------------------

[RM 13.12.1] This restriction checks at compile time that no aspect
specification, attribute definition clause, or pragma is given for a
given aspect.


File: gnat_rm.info,  Node: No_Standard_Allocators_After_Elaboration,  Next: No_Standard_Storage_Pools,  Prev: No_Specification_of_Aspect,  Up: Partition-Wide Restrictions

5.1.55 No_Standard_Allocators_After_Elaboration
-----------------------------------------------

[RM D.7] Specifies that an allocator using a standard storage pool
should never be evaluated at run time after the elaboration of the
library items of the partition has completed. Otherwise, Storage_Error
is raised.


File: gnat_rm.info,  Node: No_Standard_Storage_Pools,  Next: No_Stream_Optimizations,  Prev: No_Standard_Allocators_After_Elaboration,  Up: Partition-Wide Restrictions

5.1.56 No_Standard_Storage_Pools
--------------------------------

[GNAT] This restriction ensures at compile time that no access types
use the standard default storage pool.  Any access type declared must
have an explicit Storage_Pool attribute defined specifying a
user-defined storage pool.


File: gnat_rm.info,  Node: No_Stream_Optimizations,  Next: No_Streams,  Prev: No_Standard_Storage_Pools,  Up: Partition-Wide Restrictions

5.1.57 No_Stream_Optimizations
------------------------------

[GNAT] This restriction affects the performance of stream operations on
types `String', `Wide_String' and `Wide_Wide_String'. By default, the
compiler uses block reads and writes when manipulating `String' objects
due to their supperior performance. When this restriction is in effect,
the compiler performs all IO operations on a per-character basis.


File: gnat_rm.info,  Node: No_Streams,  Next: No_Task_Allocators,  Prev: No_Stream_Optimizations,  Up: Partition-Wide Restrictions

5.1.58 No_Streams
-----------------

[GNAT] This restriction ensures at compile/bind time that there are no
stream objects created and no use of stream attributes.  This
restriction does not forbid dependences on the package `Ada.Streams'.
So it is permissible to with `Ada.Streams' (or another package that
does so itself) as long as no actual stream objects are created and no
stream attributes are used.

Note that the use of restriction allows optimization of tagged types,
since they do not need to worry about dispatching stream operations.
To take maximum advantage of this space-saving optimization, any unit
declaring a tagged type should be compiled with the restriction, though
this is not required.


File: gnat_rm.info,  Node: No_Task_Allocators,  Next: No_Task_Attributes_Package,  Prev: No_Streams,  Up: Partition-Wide Restrictions

5.1.59 No_Task_Allocators
-------------------------

[RM D.7] There are no allocators for task types or types containing
task subcomponents.


File: gnat_rm.info,  Node: No_Task_Attributes_Package,  Next: No_Task_Hierarchy,  Prev: No_Task_Allocators,  Up: Partition-Wide Restrictions

5.1.60 No_Task_Attributes_Package
---------------------------------

[GNAT] This restriction ensures at compile time that there are no
implicit or explicit dependencies on the package `Ada.Task_Attributes'.

The restriction `No_Task_Attributes' is recognized as a synonym for
`No_Task_Attributes_Package'. This is retained for historical
compatibility purposes (and a warning will be generated for its use if
warnings on obsolescent features are activated).


File: gnat_rm.info,  Node: No_Task_Hierarchy,  Next: No_Task_Termination,  Prev: No_Task_Attributes_Package,  Up: Partition-Wide Restrictions

5.1.61 No_Task_Hierarchy
------------------------

[RM D.7] All (non-environment) tasks depend directly on the environment
task of the partition.


File: gnat_rm.info,  Node: No_Task_Termination,  Next: No_Tasking,  Prev: No_Task_Hierarchy,  Up: Partition-Wide Restrictions

5.1.62 No_Task_Termination
--------------------------

[RM D.7] Tasks that terminate are erroneous.


File: gnat_rm.info,  Node: No_Tasking,  Next: No_Terminate_Alternatives,  Prev: No_Task_Termination,  Up: Partition-Wide Restrictions

5.1.63 No_Tasking
-----------------

[GNAT] This restriction prevents the declaration of tasks or task types
throughout the partition.  It is similar in effect to the use of
`Max_Tasks => 0' except that violations are caught at compile time and
cause an error message to be output either by the compiler or binder.


File: gnat_rm.info,  Node: No_Terminate_Alternatives,  Next: No_Unchecked_Access,  Prev: No_Tasking,  Up: Partition-Wide Restrictions

5.1.64 No_Terminate_Alternatives
--------------------------------

[RM D.7] There are no selective accepts with terminate alternatives.


File: gnat_rm.info,  Node: No_Unchecked_Access,  Next: No_Use_Of_Entity,  Prev: No_Terminate_Alternatives,  Up: Partition-Wide Restrictions

5.1.65 No_Unchecked_Access
--------------------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of the Unchecked_Access attribute.


File: gnat_rm.info,  Node: No_Use_Of_Entity,  Next: Simple_Barriers,  Prev: No_Unchecked_Access,  Up: Partition-Wide Restrictions

5.1.66 No_Use_Of_Entity
-----------------------

[GNAT] This restriction ensures at compile time that there are no
references to the entity given in the form

    No_Use_Of_Entity => Name

where `Name' is the fully qualified entity, for example

    No_Use_Of_Entity => Ada.Text_IO.Put_Line


File: gnat_rm.info,  Node: Simple_Barriers,  Next: Static_Priorities,  Prev: No_Use_Of_Entity,  Up: Partition-Wide Restrictions

5.1.67 Simple_Barriers
----------------------

[RM D.7] This restriction ensures at compile time that barriers in entry
declarations for protected types are restricted to either static boolean
expressions or references to simple boolean variables defined in the
private part of the protected type.  No other form of entry barriers is
permitted.

The restriction `Boolean_Entry_Barriers' is recognized as a synonym for
`Simple_Barriers'. This is retained for historical compatibility
purposes (and a warning will be generated for its use if warnings on
obsolescent features are activated).


File: gnat_rm.info,  Node: Static_Priorities,  Next: Static_Storage_Size,  Prev: Simple_Barriers,  Up: Partition-Wide Restrictions

5.1.68 Static_Priorities
------------------------

[GNAT] This restriction ensures at compile time that all priority
expressions are static, and that there are no dependences on the package
`Ada.Dynamic_Priorities'.


File: gnat_rm.info,  Node: Static_Storage_Size,  Prev: Static_Priorities,  Up: Partition-Wide Restrictions

5.1.69 Static_Storage_Size
--------------------------

[GNAT] This restriction ensures at compile time that any expression
appearing in a Storage_Size pragma or attribute definition clause is
static.


File: gnat_rm.info,  Node: Program Unit Level Restrictions,  Prev: Partition-Wide Restrictions,  Up: Standard and Implementation Defined Restrictions

5.2 Program Unit Level Restrictions
===================================

The second set of restriction identifiers does not require
partition-wide consistency.  The restriction may be enforced for a
single compilation unit without any effect on any of the other
compilation units in the partition.

* Menu:

* No_Elaboration_Code::
* No_Entry_Queue::
* No_Implementation_Aspect_Specifications::
* No_Implementation_Attributes::
* No_Implementation_Identifiers::
* No_Implementation_Pragmas::
* No_Implementation_Restrictions::
* No_Implementation_Units::
* No_Implicit_Aliasing::
* No_Obsolescent_Features::
* No_Wide_Characters::
* SPARK_05::


File: gnat_rm.info,  Node: No_Elaboration_Code,  Next: No_Entry_Queue,  Up: Program Unit Level Restrictions

5.2.1 No_Elaboration_Code
-------------------------

[GNAT] This restriction ensures at compile time that no elaboration
code is generated.  Note that this is not the same condition as is
enforced by pragma `Preelaborate'.  There are cases in which pragma
`Preelaborate' still permits code to be generated (e.g., code to
initialize a large array to all zeroes), and there are cases of units
which do not meet the requirements for pragma `Preelaborate', but for
which no elaboration code is generated.  Generally, it is the case that
preelaborable units will meet the restrictions, with the exception of
large aggregates initialized with an others_clause, and exception
declarations (which generate calls to a run-time registry procedure).
This restriction is enforced on a unit by unit basis, it need not be
obeyed consistently throughout a partition.

In the case of aggregates with others, if the aggregate has a dynamic
size, there is no way to eliminate the elaboration code (such dynamic
bounds would be incompatible with `Preelaborate' in any case). If the
bounds are static, then use of this restriction actually modifies the
code choice of the compiler to avoid generating a loop, and instead
generate the aggregate statically if possible, no matter how many times
the data for the others clause must be repeatedly generated.

It is not possible to precisely document the constructs which are
compatible with this restriction, since, unlike most other
restrictions, this is not a restriction on the source code, but a
restriction on the generated object code. For example, if the source
contains a declaration:

    Val : constant Integer := X;

where X is not a static constant, it may be possible, depending on
complex optimization circuitry, for the compiler to figure out the
value of X at compile time, in which case this initialization can be
done by the loader, and requires no initialization code. It is not
possible to document the precise conditions under which the optimizer
can figure this out.

Note that this the implementation of this restriction requires full
code generation. If it is used in conjunction with "semantics only"
checking, then some cases of violations may be missed.


File: gnat_rm.info,  Node: No_Entry_Queue,  Next: No_Implementation_Aspect_Specifications,  Prev: No_Elaboration_Code,  Up: Program Unit Level Restrictions

5.2.2 No_Entry_Queue
--------------------

[GNAT] This restriction is a declaration that any protected entry
compiled in the scope of the restriction has at most one task waiting
on the entry at any one time, and so no queue is required.  This
restriction is not checked at compile time.  A program execution is
erroneous if an attempt is made to queue a second task on such an entry.


File: gnat_rm.info,  Node: No_Implementation_Aspect_Specifications,  Next: No_Implementation_Attributes,  Prev: No_Entry_Queue,  Up: Program Unit Level Restrictions

5.2.3 No_Implementation_Aspect_Specifications
---------------------------------------------

[RM 13.12.1] This restriction checks at compile time that no
GNAT-defined aspects are present.  With this restriction, the only
aspects that can be used are those defined in the Ada Reference Manual.


File: gnat_rm.info,  Node: No_Implementation_Attributes,  Next: No_Implementation_Identifiers,  Prev: No_Implementation_Aspect_Specifications,  Up: Program Unit Level Restrictions

5.2.4 No_Implementation_Attributes
----------------------------------

[RM 13.12.1] This restriction checks at compile time that no
GNAT-defined attributes are present.  With this restriction, the only
attributes that can be used are those defined in the Ada Reference
Manual.


File: gnat_rm.info,  Node: No_Implementation_Identifiers,  Next: No_Implementation_Pragmas,  Prev: No_Implementation_Attributes,  Up: Program Unit Level Restrictions

5.2.5 No_Implementation_Identifiers
-----------------------------------

[RM 13.12.1] This restriction checks at compile time that no
implementation-defined identifiers (marked with pragma
Implementation_Defined) occur within language-defined packages.


File: gnat_rm.info,  Node: No_Implementation_Pragmas,  Next: No_Implementation_Restrictions,  Prev: No_Implementation_Identifiers,  Up: Program Unit Level Restrictions

5.2.6 No_Implementation_Pragmas
-------------------------------

[RM 13.12.1] This restriction checks at compile time that no
GNAT-defined pragmas are present.  With this restriction, the only
pragmas that can be used are those defined in the Ada Reference Manual.


File: gnat_rm.info,  Node: No_Implementation_Restrictions,  Next: No_Implementation_Units,  Prev: No_Implementation_Pragmas,  Up: Program Unit Level Restrictions

5.2.7 No_Implementation_Restrictions
------------------------------------

[GNAT] This restriction checks at compile time that no GNAT-defined
restriction identifiers (other than `No_Implementation_Restrictions'
itself) are present.  With this restriction, the only other restriction
identifiers that can be used are those defined in the Ada Reference
Manual.


File: gnat_rm.info,  Node: No_Implementation_Units,  Next: No_Implicit_Aliasing,  Prev: No_Implementation_Restrictions,  Up: Program Unit Level Restrictions

5.2.8 No_Implementation_Units
-----------------------------

[RM 13.12.1] This restriction checks at compile time that there is no
mention in the context clause of any implementation-defined descendants
of packages Ada, Interfaces, or System.


File: gnat_rm.info,  Node: No_Implicit_Aliasing,  Next: No_Obsolescent_Features,  Prev: No_Implementation_Units,  Up: Program Unit Level Restrictions

5.2.9 No_Implicit_Aliasing
--------------------------

[GNAT] This restriction, which is not required to be partition-wide
consistent, requires an explicit aliased keyword for an object to which
'Access, 'Unchecked_Access, or 'Address is applied, and forbids
entirely the use of the 'Unrestricted_Access attribute for objects.
Note: the reason that Unrestricted_Access is forbidden is that it would
require the prefix to be aliased, and in such cases, it can always be
replaced by the standard attribute Unchecked_Access which is preferable.


File: gnat_rm.info,  Node: No_Obsolescent_Features,  Next: No_Wide_Characters,  Prev: No_Implicit_Aliasing,  Up: Program Unit Level Restrictions

5.2.10 No_Obsolescent_Features
------------------------------

[RM 13.12.1] This restriction checks at compile time that no obsolescent
features are used, as defined in Annex J of the Ada Reference Manual.


File: gnat_rm.info,  Node: No_Wide_Characters,  Next: SPARK_05,  Prev: No_Obsolescent_Features,  Up: Program Unit Level Restrictions

5.2.11 No_Wide_Characters
-------------------------

[GNAT] This restriction ensures at compile time that no uses of the
types `Wide_Character' or `Wide_String' or corresponding wide wide types
appear, and that no wide or wide wide string or character literals
appear in the program (that is literals representing characters not in
type `Character').


File: gnat_rm.info,  Node: SPARK_05,  Prev: No_Wide_Characters,  Up: Program Unit Level Restrictions

5.2.12 SPARK_05
---------------

[GNAT] This restriction checks at compile time that some constructs
forbidden in SPARK 2005 are not present. Error messages related to
SPARK restriction have the form:

    violation of restriction "SPARK_05" at <source-location>
     <error message>

The restriction `SPARK' is recognized as a synonym for `SPARK_05'. This
is retained for historical compatibility purposes (and an unconditional
warning will be generated for its use, advising replacement by `SPARK').

This is not a replacement for the semantic checks performed by the
SPARK Examiner tool, as the compiler currently only deals with code,
not SPARK 2005 annotations, and does not guarantee catching all cases
of constructs forbidden by SPARK 2005.

Thus it may well be the case that code which passes the compiler with
the SPARK restriction is rejected by the SPARK Examiner, e.g. due to
the different visibility rules of the Examiner based on SPARK 2005
`inherit' annotations.

This restriction can be useful in providing an initial filter for code
developed using SPARK 2005, or in examining legacy code to see how far
it is from meeting SPARK restrictions.

The list below summarizes the checks that are performed when this
restriction is in force:

   * No block statements

   * No case statements with only an others clause

   * Exit statements in loops must respect the SPARK 2005 language
     restrictions

   * No goto statements

   * Return can only appear as last statement in function

   * Function must have return statement

   * Loop parameter specification must include subtype mark

   * Prefix of expanded name cannot be a loop statement

   * Abstract subprogram not allowed

   * User-defined operators not allowed

   * Access type parameters not allowed

   * Default expressions for parameters not allowed

   * Default expressions for record fields not allowed

   * No tasking constructs allowed

   * Label needed at end of subprograms and packages

   * No mixing of positional and named parameter association

   * No access types as result type

   * No unconstrained arrays as result types

   * No null procedures

   * Initial and later declarations must be in correct order
     (declaration can't come after body)

   * No attributes on private types if full declaration not visible

   * No package declaration within package specification

   * No controlled types

   * No discriminant types

   * No overloading

   * Selector name cannot be operator symbol (i.e. operator symbol
     cannot be prefixed)

   * Access attribute not allowed

   * Allocator not allowed

   * Result of catenation must be String

   * Operands of catenation must be string literal, static char or
     another catenation

   * No conditional expressions

   * No explicit dereference

   * Quantified expression not allowed

   * Slicing not allowed

   * No exception renaming

   * No generic renaming

   * No object renaming

   * No use clause

   * Aggregates must be qualified

   * Non-static choice in array aggregates not allowed

   * The only view conversions which are allowed as in-out parameters
     are conversions of a tagged type to an ancestor type

   * No mixing of positional and named association in aggregate, no
     multi choice

   * AND, OR and XOR for arrays only allowed when operands have same
     static bounds

   * Fixed point operands to * or / must be qualified or converted

   * Comparison operators not allowed for Booleans or arrays (except
     strings)

   * Equality not allowed for arrays with non-matching static bounds
     (except strings)

   * Conversion / qualification not allowed for arrays with
     non-matching static bounds

   * Subprogram declaration only allowed in package spec (unless
     followed by import)

   * Access types not allowed

   * Incomplete type declaration not allowed

   * Object and subtype declarations must respect SPARK restrictions

   * Digits or delta constraint not allowed

   * Decimal fixed point type not allowed

   * Aliasing of objects not allowed

   * Modular type modulus must be power of 2

   * Base not allowed on subtype mark

   * Unary operators not allowed on modular types (except not)

   * Untagged record cannot be null

   * No class-wide operations

   * Initialization expressions must respect SPARK restrictions

   * Non-static ranges not allowed except in iteration schemes

   * String subtypes must have lower bound of 1

   * Subtype of Boolean cannot have constraint

   * At most one tagged type or extension per package

   * Interface is not allowed

   * Character literal cannot be prefixed (selector name cannot be
     character literal)

   * Record aggregate cannot contain 'others'

   * Component association in record aggregate must contain a single
     choice

   * Ancestor part cannot be a type mark

   * Attributes 'Image, 'Width and 'Value not allowed

   * Functions may not update globals

   * Subprograms may not contain direct calls to themselves (prevents
     recursion within unit)

   * Call to subprogram not allowed in same unit before body has been
     seen (prevents recursion within unit)

The following restrictions are enforced, but note that they are
actually more strict that the latest SPARK 2005 language definition:

   * No derived types other than tagged type extensions

   * Subtype of unconstrained array must have constraint

This list summarises the main SPARK 2005 language rules that are not
currently checked by the SPARK_05 restriction:

   * SPARK annotations are treated as comments so are not checked at all

   * Based real literals not allowed

   * Objects cannot be initialized at declaration by calls to
     user-defined functions

   * Objects cannot be initialized at declaration by assignments from
     variables

   * Objects cannot be initialized at declaration by assignments from
     indexed/selected components

   * Ranges shall not be null

   * A fixed point delta expression must be a simple expression

   * Restrictions on where renaming declarations may be placed

   * Externals of mode 'out' cannot be referenced

   * Externals of mode 'in' cannot be updated

   * Loop with no iteration scheme or exits only allowed as last
     statement in main program or task

   * Subprogram cannot have parent unit name

   * SPARK 2005 inherited subprogram must be prefixed with overriding

   * External variables (or functions that reference them) may not be
     passed as actual parameters

   * Globals must be explicitly mentioned in contract

   * Deferred constants cannot be completed by pragma Import

   * Package initialization cannot read/write variables from other
     packages

   * Prefix not allowed for entities that are directly visible

   * Identifier declaration can't override inherited package name

   * Cannot use Standard or other predefined packages as identifiers

   * After renaming, cannot use the original name

   * Subprograms can only be renamed to remove package prefix

   * Pragma import must be immediately after entity it names

   * No mutual recursion between multiple units (this can be checked
     with gnatcheck)

Note that if a unit is compiled in Ada 95 mode with the SPARK
restriction, violations will be reported for constructs forbidden in
SPARK 95, instead of SPARK 2005.


File: gnat_rm.info,  Node: Implementation Advice,  Next: Implementation Defined Characteristics,  Prev: Standard and Implementation Defined Restrictions,  Up: Top

6 Implementation Advice
***********************

The main text of the Ada Reference Manual describes the required
behavior of all Ada compilers, and the GNAT compiler conforms to these
requirements.

In addition, there are sections throughout the Ada Reference Manual
headed by the phrase 'Implementation advice'.  These sections are not
normative, i.e., they do not specify requirements that all compilers
must follow.  Rather they provide advice on generally desirable
behavior.  They are not requirements, because they describe behavior
that cannot be provided on all systems, or may be undesirable on some
systems.

As far as practical, GNAT follows the implementation advice in the Ada
Reference Manual.  Each such RM section corresponds to a section in
this chapter whose title specifies the RM section number and paragraph
number and the subject of the advice.  The contents of each section
consists of the RM text within quotation marks, followed by the GNAT
interpretation of the advice.  Most often, this simply says 'followed',
which means that GNAT follows the advice.  However, in a number of
cases, GNAT deliberately deviates from this advice, in which case the
text describes what GNAT does and why.

* Menu:

* RM 1.1.3(20); Error Detection: RM 1 1 3 20 Error Detection.
* RM 1.1.3(31); Child Units: RM 1 1 3 31 Child Units.
* RM 1.1.5(12); Bounded Errors: RM 1 1 5 12 Bounded Errors.
* RM 2.8(16); Pragmas: RM 2 8 16 Pragmas.
* RM 2.8(17-19); Pragmas: RM 2 8 17-19 Pragmas.
* RM 3.5.2(5); Alternative Character Sets: RM 3 5 2 5 Alternative Character Sets.
* RM 3.5.4(28); Integer Types: RM 3 5 4 28 Integer Types.
* RM 3.5.4(29); Integer Types: RM 3 5 4 29 Integer Types.
* RM 3.5.5(8); Enumeration Values: RM 3 5 5 8 Enumeration Values.
* RM 3.5.7(17); Float Types: RM 3 5 7 17 Float Types.
* RM 3.6.2(11); Multidimensional Arrays: RM 3 6 2 11 Multidimensional Arrays.
* RM 9.6(30-31); Duration'Small: RM 9 6 30-31 Duration'Small.
* RM 10.2.1(12); Consistent Representation: RM 10 2 1 12 Consistent Representation.
* RM 11.4.1(19); Exception Information: RM 11 4 1 19 Exception Information.
* RM 11.5(28); Suppression of Checks: RM 11 5 28 Suppression of Checks.
* RM 13.1 (21-24); Representation Clauses: RM 13 1 21-24 Representation Clauses.
* RM 13.2(6-8); Packed Types: RM 13 2 6-8 Packed Types.
* RM 13.3(14-19); Address Clauses: RM 13 3 14-19 Address Clauses.
* RM 13.3(29-35); Alignment Clauses: RM 13 3 29-35 Alignment Clauses.
* RM 13.3(42-43); Size Clauses: RM 13 3 42-43 Size Clauses.
* RM 13.3(50-56); Size Clauses: RM 13 3 50-56 Size Clauses.
* RM 13.3(71-73); Component Size Clauses: RM 13 3 71-73 Component Size Clauses.
* RM 13.4(9-10); Enumeration Representation Clauses: RM 13 4 9-10 Enumeration Representation Clauses.
* RM 13.5.1(17-22); Record Representation Clauses: RM 13 5 1 17-22 Record Representation Clauses.
* RM 13.5.2(5); Storage Place Attributes: RM 13 5 2 5 Storage Place Attributes.
* RM 13.5.3(7-8); Bit Ordering: RM 13 5 3 7-8 Bit Ordering.
* RM 13.7(37); Address as Private: RM 13 7 37 Address as Private.
* RM 13.7.1(16); Address Operations: RM 13 7 1 16 Address Operations.
* RM 13.9(14-17); Unchecked Conversion: RM 13 9 14-17 Unchecked Conversion.
* RM 13.11(23-25); Implicit Heap Usage: RM 13 11 23-25 Implicit Heap Usage.
* RM 13.11.2(17); Unchecked Deallocation: RM 13 11 2 17 Unchecked Deallocation.
* RM 13.13.2(17); Stream Oriented Attributes: RM 13 13 2 17 Stream Oriented Attributes.
* RM A.1(52); Names of Predefined Numeric Types: RM A 1 52 Names of Predefined Numeric Types.
* RM A.3.2(49); Ada.Characters.Handling: RM A 3 2 49 Ada Characters Handling.
* RM A.4.4(106); Bounded-Length String Handling: RM A 4 4 106 Bounded-Length String Handling.
* RM A.5.2(46-47); Random Number Generation: RM A 5 2 46-47 Random Number Generation.
* RM A.10.7(23); Get_Immediate: RM A 10 7 23 Get_Immediate.
* RM B.1(39-41); Pragma Export: RM B 1 39-41 Pragma Export.
* RM B.2(12-13); Package Interfaces: RM B 2 12-13 Package Interfaces.
* RM B.3(63-71); Interfacing with C: RM B 3 63-71 Interfacing with C.
* RM B.4(95-98); Interfacing with COBOL: RM B 4 95-98 Interfacing with COBOL.
* RM B.5(22-26); Interfacing with Fortran: RM B 5 22-26 Interfacing with Fortran.
* RM C.1(3-5); Access to Machine Operations: RM C 1 3-5 Access to Machine Operations.
* RM C.1(10-16); Access to Machine Operations: RM C 1 10-16 Access to Machine Operations.
* RM C.3(28); Interrupt Support: RM C 3 28 Interrupt Support.
* RM C.3.1(20-21); Protected Procedure Handlers: RM C 3 1 20-21 Protected Procedure Handlers.
* RM C.3.2(25); Package Interrupts: RM C 3 2 25 Package Interrupts.
* RM C.4(14); Pre-elaboration Requirements: RM C 4 14 Pre-elaboration Requirements.
* RM C.5(8); Pragma Discard_Names: RM C 5 8 Pragma Discard_Names.
* RM C.7.2(30); The Package Task_Attributes: RM C 7 2 30 The Package Task_Attributes.
* RM D.3(17); Locking Policies: RM D 3 17 Locking Policies.
* RM D.4(16); Entry Queuing Policies: RM D 4 16 Entry Queuing Policies.
* RM D.6(9-10); Preemptive Abort: RM D 6 9-10 Preemptive Abort.
* RM D.7(21); Tasking Restrictions: RM D 7 21 Tasking Restrictions.
* RM D.8(47-49); Monotonic Time: RM D 8 47-49 Monotonic Time.
* RM E.5(28-29); Partition Communication Subsystem: RM E 5 28-29 Partition Communication Subsystem.
* RM F(7); COBOL Support: RM F 7 COBOL Support.
* RM F.1(2); Decimal Radix Support: RM F 1 2 Decimal Radix Support.
* RM G; Numerics: RM G Numerics.
* RM G.1.1(56-58); Complex Types: RM G 1 1 56-58 Complex Types.
* RM G.1.2(49); Complex Elementary Functions: RM G 1 2 49 Complex Elementary Functions.
* RM G.2.4(19); Accuracy Requirements: RM G 2 4 19 Accuracy Requirements.
* RM G.2.6(15); Complex Arithmetic Accuracy: RM G 2 6 15 Complex Arithmetic Accuracy.
* RM H.6(15/2); Pragma Partition_Elaboration_Policy: RM H 6 15/2 Pragma Partition_Elaboration_Policy.


File: gnat_rm.info,  Node: RM 1 1 3 20 Error Detection,  Next: RM 1 1 3 31 Child Units,  Up: Implementation Advice

6.1 RM 1.1.3(20): Error Detection
=================================

     "If an implementation detects the use of an unsupported
     Specialized Needs Annex feature at run time, it should raise
     `Program_Error' if feasible."

Not relevant.  All specialized needs annex features are either
supported, or diagnosed at compile time.


File: gnat_rm.info,  Node: RM 1 1 3 31 Child Units,  Next: RM 1 1 5 12 Bounded Errors,  Prev: RM 1 1 3 20 Error Detection,  Up: Implementation Advice

6.2 RM 1.1.3(31): Child Units
=============================

     "If an implementation wishes to provide implementation-defined
     extensions to the functionality of a language-defined library
     unit, it should normally do so by adding children to the library
     unit."

Followed.


File: gnat_rm.info,  Node: RM 1 1 5 12 Bounded Errors,  Next: RM 2 8 16 Pragmas,  Prev: RM 1 1 3 31 Child Units,  Up: Implementation Advice

6.3 RM 1.1.5(12): Bounded Errors
================================

     "If an implementation detects a bounded error or erroneous
     execution, it should raise `Program_Error'."

Followed in all cases in which the implementation detects a bounded
error or erroneous execution.  Not all such situations are detected at
runtime.


File: gnat_rm.info,  Node: RM 2 8 16 Pragmas,  Next: RM 2 8 17-19 Pragmas,  Prev: RM 1 1 5 12 Bounded Errors,  Up: Implementation Advice

6.4 RM 2.8(16): Pragmas
=======================

     "Normally, implementation-defined pragmas should have no semantic
     effect for error-free programs; that is, if the
     implementation-defined pragmas are removed from a working program,
     the program should still be legal, and should still have the same
     semantics."

The following implementation defined pragmas are exceptions to this
rule:

Pragma                   Explanation
------------------------------------------------- 
`Abort_Defer'            Affects semantics
`Ada_83'                 Affects legality
`Assert'                 Affects semantics
`CPP_Class'              Affects semantics
`CPP_Constructor'        Affects semantics
`Debug'                  Affects semantics
`Interface_Name'         Affects semantics
`Machine_Attribute'      Affects semantics
`Unimplemented_Unit'     Affects legality
`Unchecked_Union'        Affects semantics

In each of the above cases, it is essential to the purpose of the pragma
that this advice not be followed.  For details see *Note Implementation
Defined Pragmas: 7.


File: gnat_rm.info,  Node: RM 2 8 17-19 Pragmas,  Next: RM 3 5 2 5 Alternative Character Sets,  Prev: RM 2 8 16 Pragmas,  Up: Implementation Advice

6.5 RM 2.8(17-19): Pragmas
==========================

     "Normally, an implementation should not define pragmas that can
     make an illegal program legal, except as follows:

        * A pragma used to complete a declaration, such as a pragma
          `Import';

        * A pragma used to configure the environment by adding,
          removing, or replacing `library_items'."

See *Note RM 2.8(16); Pragmas: 1c0.


File: gnat_rm.info,  Node: RM 3 5 2 5 Alternative Character Sets,  Next: RM 3 5 4 28 Integer Types,  Prev: RM 2 8 17-19 Pragmas,  Up: Implementation Advice

6.6 RM 3.5.2(5): Alternative Character Sets
===========================================

     "If an implementation supports a mode with alternative
     interpretations for `Character' and `Wide_Character', the set of
     graphic characters of `Character' should nevertheless remain a
     proper subset of the set of graphic characters of
     `Wide_Character'.  Any character set 'localizations' should be
     reflected in the results of the subprograms defined in the
     language-defined package `Characters.Handling' (see A.3) available
     in such a mode.  In a mode with an alternative interpretation of
     `Character', the implementation should also support a
     corresponding change in what is a legal `identifier_letter'."

Not all wide character modes follow this advice, in particular the JIS
and IEC modes reflect standard usage in Japan, and in these encoding,
the upper half of the Latin-1 set is not part of the wide-character
subset, since the most significant bit is used for wide character
encoding.  However, this only applies to the external forms.  Internally
there is no such restriction.


File: gnat_rm.info,  Node: RM 3 5 4 28 Integer Types,  Next: RM 3 5 4 29 Integer Types,  Prev: RM 3 5 2 5 Alternative Character Sets,  Up: Implementation Advice

6.7 RM 3.5.4(28): Integer Types
===============================

     "An implementation should support `Long_Integer' in addition to
     `Integer' if the target machine supports 32-bit (or longer)
     arithmetic.  No other named integer subtypes are recommended for
     package `Standard'.  Instead, appropriate named integer subtypes
     should be provided in the library package `Interfaces' (see B.2)."

`Long_Integer' is supported.  Other standard integer types are supported
so this advice is not fully followed.  These types are supported for
convenient interface to C, and so that all hardware types of the
machine are easily available.


File: gnat_rm.info,  Node: RM 3 5 4 29 Integer Types,  Next: RM 3 5 5 8 Enumeration Values,  Prev: RM 3 5 4 28 Integer Types,  Up: Implementation Advice

6.8 RM 3.5.4(29): Integer Types
===============================

     "An implementation for a two's complement machine should support
     modular types with a binary modulus up to `System.Max_Int*2+2'.  An
     implementation should support a non-binary modules up to
     `Integer'Last'."

Followed.


File: gnat_rm.info,  Node: RM 3 5 5 8 Enumeration Values,  Next: RM 3 5 7 17 Float Types,  Prev: RM 3 5 4 29 Integer Types,  Up: Implementation Advice

6.9 RM 3.5.5(8): Enumeration Values
===================================

     "For the evaluation of a call on `S'Pos' for an enumeration
     subtype, if the value of the operand does not correspond to the
     internal code for any enumeration literal of its type (perhaps due
     to an un-initialized variable), then the implementation should
     raise `Program_Error'.  This is particularly important for
     enumeration types with noncontiguous internal codes specified by an
     enumeration_representation_clause."

Followed.


File: gnat_rm.info,  Node: RM 3 5 7 17 Float Types,  Next: RM 3 6 2 11 Multidimensional Arrays,  Prev: RM 3 5 5 8 Enumeration Values,  Up: Implementation Advice

6.10 RM 3.5.7(17): Float Types
==============================

     "An implementation should support `Long_Float' in addition to
     `Float' if the target machine supports 11 or more digits of
     precision.  No other named floating point subtypes are recommended
     for package `Standard'.  Instead, appropriate named floating point
     subtypes should be provided in the library package `Interfaces'
     (see B.2)."

`Short_Float' and `Long_Long_Float' are also provided.  The former
provides improved compatibility with other implementations supporting
this type.  The latter corresponds to the highest precision
floating-point type supported by the hardware.  On most machines, this
will be the same as `Long_Float', but on some machines, it will
correspond to the IEEE extended form.  The notable case is all ia32
(x86) implementations, where `Long_Long_Float' corresponds to the
80-bit extended precision format supported in hardware on this
processor.  Note that the 128-bit format on SPARC is not supported,
since this is a software rather than a hardware format.


File: gnat_rm.info,  Node: RM 3 6 2 11 Multidimensional Arrays,  Next: RM 9 6 30-31 Duration'Small,  Prev: RM 3 5 7 17 Float Types,  Up: Implementation Advice

6.11 RM 3.6.2(11): Multidimensional Arrays
==========================================

     "An implementation should normally represent multidimensional
     arrays in row-major order, consistent with the notation used for
     multidimensional array aggregates (see 4.3.3).  However, if a
     pragma `Convention' (`Fortran', ...) applies to a multidimensional
     array type, then column-major order should be used instead (see
     B.5, `Interfacing with Fortran')."

Followed.


File: gnat_rm.info,  Node: RM 9 6 30-31 Duration'Small,  Next: RM 10 2 1 12 Consistent Representation,  Prev: RM 3 6 2 11 Multidimensional Arrays,  Up: Implementation Advice

6.12 RM 9.6(30-31): Duration'Small
==================================

     "Whenever possible in an implementation, the value of
     `Duration'Small' should be no greater than 100 microseconds."

Followed.  (`Duration'Small' = 10**(-9)).

     "The time base for `delay_relative_statements' should be monotonic;
     it need not be the same time base as used for `Calendar.Clock'."

Followed.


File: gnat_rm.info,  Node: RM 10 2 1 12 Consistent Representation,  Next: RM 11 4 1 19 Exception Information,  Prev: RM 9 6 30-31 Duration'Small,  Up: Implementation Advice

6.13 RM 10.2.1(12): Consistent Representation
=============================================

     "In an implementation, a type declared in a pre-elaborated package
     should have the same representation in every elaboration of a
     given version of the package, whether the elaborations occur in
     distinct executions of the same program, or in executions of
     distinct programs or partitions that include the given version."

Followed, except in the case of tagged types.  Tagged types involve
implicit pointers to a local copy of a dispatch table, and these
pointers have representations which thus depend on a particular
elaboration of the package.  It is not easy to see how it would be
possible to follow this advice without severely impacting efficiency of
execution.


File: gnat_rm.info,  Node: RM 11 4 1 19 Exception Information,  Next: RM 11 5 28 Suppression of Checks,  Prev: RM 10 2 1 12 Consistent Representation,  Up: Implementation Advice

6.14 RM 11.4.1(19): Exception Information
=========================================

     "`Exception_Message' by default and `Exception_Information' should
     produce information useful for debugging.  `Exception_Message'
     should be short, about one line.  `Exception_Information' can be
     long.  `Exception_Message' should not include the
     `Exception_Name'.  `Exception_Information' should include both the
     `Exception_Name' and the `Exception_Message'."

Followed.  For each exception that doesn't have a specified
`Exception_Message', the compiler generates one containing the location
of the raise statement.  This location has the form 'file_name:line',
where file_name is the short file name (without path information) and
line is the line number in the file.  Note that in the case of the Zero
Cost Exception mechanism, these messages become redundant with the
Exception_Information that contains a full backtrace of the calling
sequence, so they are disabled.  To disable explicitly the generation
of the source location message, use the Pragma `Discard_Names'.


File: gnat_rm.info,  Node: RM 11 5 28 Suppression of Checks,  Next: RM 13 1 21-24 Representation Clauses,  Prev: RM 11 4 1 19 Exception Information,  Up: Implementation Advice

6.15 RM 11.5(28): Suppression of Checks
=======================================

     "The implementation should minimize the code executed for checks
     that have been suppressed."

Followed.


File: gnat_rm.info,  Node: RM 13 1 21-24 Representation Clauses,  Next: RM 13 2 6-8 Packed Types,  Prev: RM 11 5 28 Suppression of Checks,  Up: Implementation Advice

6.16 RM 13.1 (21-24): Representation Clauses
============================================

     "The recommended level of support for all representation items is
     qualified as follows:

     An implementation need not support representation items containing
     non-static expressions, except that an implementation should
     support a representation item for a given entity if each
     non-static expression in the representation item is a name that
     statically denotes a constant declared before the entity."

Followed.  In fact, GNAT goes beyond the recommended level of support
by allowing nonstatic expressions in some representation clauses even
without the need to declare constants initialized with the values of
such expressions.  For example:

      X : Integer;
      Y : Float;
      for Y'Address use X'Address;>>


    "An implementation need not support a specification for the `Size`
    for a given composite subtype, nor the size or storage place for an
    object (including a component) of a given composite subtype, unless the
    constraints on the subtype and its composite subcomponents (if any) are
    all static constraints."

Followed.  Size Clauses are not permitted on non-static components, as
described above.

     "An aliased component, or a component whose type is by-reference,
     should always be allocated at an addressable location."

Followed.


File: gnat_rm.info,  Node: RM 13 2 6-8 Packed Types,  Next: RM 13 3 14-19 Address Clauses,  Prev: RM 13 1 21-24 Representation Clauses,  Up: Implementation Advice

6.17 RM 13.2(6-8): Packed Types
===============================

     "If a type is packed, then the implementation should try to
     minimize storage allocated to objects of the type, possibly at the
     expense of speed of accessing components, subject to reasonable
     complexity in addressing calculations.

     The recommended level of support pragma `Pack' is:

     For a packed record type, the components should be packed as
     tightly as possible subject to the Sizes of the component
     subtypes, and subject to any `record_representation_clause' that
     applies to the type; the implementation may, but need not, reorder
     components or cross aligned word boundaries to improve the
     packing.  A component whose `Size' is greater than the word size
     may be allocated an integral number of words."

Followed.  Tight packing of arrays is supported for all component sizes
up to 64-bits. If the array component size is 1 (that is to say, if the
component is a boolean type or an enumeration type with two values)
then values of the type are implicitly initialized to zero. This
happens both for objects of the packed type, and for objects that have a
subcomponent of the packed type.

     "An implementation should support Address clauses for imported
     subprograms."

Followed.


File: gnat_rm.info,  Node: RM 13 3 14-19 Address Clauses,  Next: RM 13 3 29-35 Alignment Clauses,  Prev: RM 13 2 6-8 Packed Types,  Up: Implementation Advice

6.18 RM 13.3(14-19): Address Clauses
====================================

     "For an array `X', `X'Address' should point at the first component
     of the array, and not at the array bounds."

Followed.

     "The recommended level of support for the `Address' attribute is:

     `X'Address' should produce a useful result if `X' is an object
     that is aliased or of a by-reference type, or is an entity whose
     `Address' has been specified."

Followed.  A valid address will be produced even if none of those
conditions have been met.  If necessary, the object is forced into
memory to ensure the address is valid.

     "An implementation should support `Address' clauses for imported
     subprograms."

Followed.

     "Objects (including subcomponents) that are aliased or of a
     by-reference type should be allocated on storage element
     boundaries."

Followed.

     "If the `Address' of an object is specified, or it is imported or
     exported, then the implementation should not perform optimizations
     based on assumptions of no aliases."

Followed.


File: gnat_rm.info,  Node: RM 13 3 29-35 Alignment Clauses,  Next: RM 13 3 42-43 Size Clauses,  Prev: RM 13 3 14-19 Address Clauses,  Up: Implementation Advice

6.19 RM 13.3(29-35): Alignment Clauses
======================================

     "The recommended level of support for the `Alignment' attribute for
     subtypes is:

     An implementation should support specified Alignments that are
     factors and multiples of the number of storage elements per word,
     subject to the following:"

Followed.

     "An implementation need not support specified Alignments for
     combinations of Sizes and Alignments that cannot be easily loaded
     and stored by available machine instructions."

Followed.

     "An implementation need not support specified Alignments that are
     greater than the maximum `Alignment' the implementation ever
     returns by default."

Followed.

     "The recommended level of support for the `Alignment' attribute for
     objects is:

     Same as above, for subtypes, but in addition:"

Followed.

     "For stand-alone library-level objects of statically constrained
     subtypes, the implementation should support all alignments
     supported by the target linker.  For example, page alignment is
     likely to be supported for such objects, but not for subtypes."

Followed.


File: gnat_rm.info,  Node: RM 13 3 42-43 Size Clauses,  Next: RM 13 3 50-56 Size Clauses,  Prev: RM 13 3 29-35 Alignment Clauses,  Up: Implementation Advice

6.20 RM 13.3(42-43): Size Clauses
=================================

     "The recommended level of support for the `Size' attribute of
     objects is:

     A `Size' clause should be supported for an object if the specified
     `Size' is at least as large as its subtype's `Size', and
     corresponds to a size in storage elements that is a multiple of the
     object's `Alignment' (if the `Alignment' is nonzero)."

Followed.


File: gnat_rm.info,  Node: RM 13 3 50-56 Size Clauses,  Next: RM 13 3 71-73 Component Size Clauses,  Prev: RM 13 3 42-43 Size Clauses,  Up: Implementation Advice

6.21 RM 13.3(50-56): Size Clauses
=================================

     "If the `Size' of a subtype is specified, and allows for efficient
     independent addressability (see 9.10) on the target architecture,
     then the `Size' of the following objects of the subtype should
     equal the `Size' of the subtype:

     Aliased objects (including components)."

Followed.

     "`Size' clause on a composite subtype should not affect the
     internal layout of components."

Followed. But note that this can be overridden by use of the
implementation pragma Implicit_Packing in the case of packed arrays.

     "The recommended level of support for the `Size' attribute of
     subtypes is:

     The `Size' (if not specified) of a static discrete or fixed point
     subtype should be the number of bits needed to represent each value
     belonging to the subtype using an unbiased representation, leaving
     space for a sign bit only if the subtype contains negative values.
     If such a subtype is a first subtype, then an implementation
     should support a specified `Size' for it that reflects this
     representation."

Followed.

     "For a subtype implemented with levels of indirection, the `Size'
     should include the size of the pointers, but not the size of what
     they point at."

Followed.


File: gnat_rm.info,  Node: RM 13 3 71-73 Component Size Clauses,  Next: RM 13 4 9-10 Enumeration Representation Clauses,  Prev: RM 13 3 50-56 Size Clauses,  Up: Implementation Advice

6.22 RM 13.3(71-73): Component Size Clauses
===========================================

     "The recommended level of support for the `Component_Size'
     attribute is:

     An implementation need not support specified `Component_Sizes'
     that are less than the `Size' of the component subtype."

Followed.

     "An implementation should support specified Component_Sizes that
     are factors and multiples of the word size.  For such
     Component_Sizes, the array should contain no gaps between
     components.  For other Component_Sizes (if supported), the array
     should contain no gaps between components when packing is also
     specified; the implementation should forbid this combination in
     cases where it cannot support a no-gaps representation."

Followed.


File: gnat_rm.info,  Node: RM 13 4 9-10 Enumeration Representation Clauses,  Next: RM 13 5 1 17-22 Record Representation Clauses,  Prev: RM 13 3 71-73 Component Size Clauses,  Up: Implementation Advice

6.23 RM 13.4(9-10): Enumeration Representation Clauses
======================================================

     "The recommended level of support for enumeration representation
     clauses is:

     An implementation need not support enumeration representation
     clauses for boolean types, but should at minimum support the
     internal codes in the range `System.Min_Int .. System.Max_Int'."

Followed.


File: gnat_rm.info,  Node: RM 13 5 1 17-22 Record Representation Clauses,  Next: RM 13 5 2 5 Storage Place Attributes,  Prev: RM 13 4 9-10 Enumeration Representation Clauses,  Up: Implementation Advice

6.24 RM 13.5.1(17-22): Record Representation Clauses
====================================================

     "The recommended level of support for
     `record_representation_clauses' is:

     An implementation should support storage places that can be
     extracted with a load, mask, shift sequence of machine code, and
     set with a load, shift, mask, store sequence, given the available
     machine instructions and run-time model."

Followed.

     "A storage place should be supported if its size is equal to the
     `Size' of the component subtype, and it starts and ends on a
     boundary that obeys the `Alignment' of the component subtype."

Followed.

     "If the default bit ordering applies to the declaration of a given
     type, then for a component whose subtype's `Size' is less than the
     word size, any storage place that does not cross an aligned word
     boundary should be supported."

Followed.

     "An implementation may reserve a storage place for the tag field
     of a tagged type, and disallow other components from overlapping
     that place."

Followed.  The storage place for the tag field is the beginning of the
tagged record, and its size is Address'Size.  GNAT will reject an
explicit component clause for the tag field.

     "An implementation need not support a `component_clause' for a
     component of an extension part if the storage place is not after
     the storage places of all components of the parent type, whether
     or not those storage places had been specified."

Followed.  The above advice on record representation clauses is
followed, and all mentioned features are implemented.


File: gnat_rm.info,  Node: RM 13 5 2 5 Storage Place Attributes,  Next: RM 13 5 3 7-8 Bit Ordering,  Prev: RM 13 5 1 17-22 Record Representation Clauses,  Up: Implementation Advice

6.25 RM 13.5.2(5): Storage Place Attributes
===========================================

     "If a component is represented using some form of pointer (such as
     an offset) to the actual data of the component, and this data is
     contiguous with the rest of the object, then the storage place
     attributes should reflect the place of the actual data, not the
     pointer.  If a component is allocated discontinuously from the
     rest of the object, then a warning should be generated upon
     reference to one of its storage place attributes."

Followed.  There are no such components in GNAT.


File: gnat_rm.info,  Node: RM 13 5 3 7-8 Bit Ordering,  Next: RM 13 7 37 Address as Private,  Prev: RM 13 5 2 5 Storage Place Attributes,  Up: Implementation Advice

6.26 RM 13.5.3(7-8): Bit Ordering
=================================

     "The recommended level of support for the non-default bit ordering
     is:

     If `Word_Size' = `Storage_Unit', then the implementation should
     support the non-default bit ordering in addition to the default
     bit ordering."

Followed.  Word size does not equal storage size in this implementation.
Thus non-default bit ordering is not supported.


File: gnat_rm.info,  Node: RM 13 7 37 Address as Private,  Next: RM 13 7 1 16 Address Operations,  Prev: RM 13 5 3 7-8 Bit Ordering,  Up: Implementation Advice

6.27 RM 13.7(37): Address as Private
====================================

     "`Address' should be of a private type."

Followed.


File: gnat_rm.info,  Node: RM 13 7 1 16 Address Operations,  Next: RM 13 9 14-17 Unchecked Conversion,  Prev: RM 13 7 37 Address as Private,  Up: Implementation Advice

6.28 RM 13.7.1(16): Address Operations
======================================

     "Operations in `System' and its children should reflect the target
     environment semantics as closely as is reasonable.  For example,
     on most machines, it makes sense for address arithmetic to 'wrap
     around'.  Operations that do not make sense should raise
     `Program_Error'."

Followed.  Address arithmetic is modular arithmetic that wraps around.
No operation raises `Program_Error', since all operations make sense.


File: gnat_rm.info,  Node: RM 13 9 14-17 Unchecked Conversion,  Next: RM 13 11 23-25 Implicit Heap Usage,  Prev: RM 13 7 1 16 Address Operations,  Up: Implementation Advice

6.29 RM 13.9(14-17): Unchecked Conversion
=========================================

     "The `Size' of an array object should not include its bounds;
     hence, the bounds should not be part of the converted data."

Followed.

     "The implementation should not generate unnecessary run-time
     checks to ensure that the representation of `S' is a
     representation of the target type.  It should take advantage of
     the permission to return by reference when possible.  Restrictions
     on unchecked conversions should be avoided unless required by the
     target environment."

Followed.  There are no restrictions on unchecked conversion.  A
warning is generated if the source and target types do not have the
same size since the semantics in this case may be target dependent.

     "The recommended level of support for unchecked conversions is:

     Unchecked conversions should be supported and should be reversible
     in the cases where this clause defines the result.  To enable
     meaningful use of unchecked conversion, a contiguous
     representation should be used for elementary subtypes, for
     statically constrained array subtypes whose component subtype is
     one of the subtypes described in this paragraph, and for record
     subtypes without discriminants whose component subtypes are
     described in this paragraph."

Followed.


File: gnat_rm.info,  Node: RM 13 11 23-25 Implicit Heap Usage,  Next: RM 13 11 2 17 Unchecked Deallocation,  Prev: RM 13 9 14-17 Unchecked Conversion,  Up: Implementation Advice

6.30 RM 13.11(23-25): Implicit Heap Usage
=========================================

     "An implementation should document any cases in which it
     dynamically allocates heap storage for a purpose other than the
     evaluation of an allocator."

Followed, the only other points at which heap storage is dynamically
allocated are as follows:

   * At initial elaboration time, to allocate dynamically sized global
     objects.

   * To allocate space for a task when a task is created.

   * To extend the secondary stack dynamically when needed.  The
     secondary stack is used for returning variable length results.

     "A default (implementation-provided) storage pool for an
     access-to-constant type should not have overhead to support
     deallocation of individual objects."

Followed.

     "A storage pool for an anonymous access type should be created at
     the point of an allocator for the type, and be reclaimed when the
     designated object becomes inaccessible."

Followed.


File: gnat_rm.info,  Node: RM 13 11 2 17 Unchecked Deallocation,  Next: RM 13 13 2 17 Stream Oriented Attributes,  Prev: RM 13 11 23-25 Implicit Heap Usage,  Up: Implementation Advice

6.31 RM 13.11.2(17): Unchecked Deallocation
===========================================

     "For a standard storage pool, `Free' should actually reclaim the
     storage."

Followed.


File: gnat_rm.info,  Node: RM 13 13 2 17 Stream Oriented Attributes,  Next: RM A 1 52 Names of Predefined Numeric Types,  Prev: RM 13 11 2 17 Unchecked Deallocation,  Up: Implementation Advice

6.32 RM 13.13.2(17): Stream Oriented Attributes
===============================================

     "If a stream element is the same size as a storage element, then
     the normal in-memory representation should be used by `Read' and
     `Write' for scalar objects.  Otherwise, `Read' and `Write' should
     use the smallest number of stream elements needed to represent all
     values in the base range of the scalar type."

Followed.  By default, GNAT uses the interpretation suggested by AI-195,
which specifies using the size of the first subtype.  However, such an
implementation is based on direct binary representations and is
therefore target- and endianness-dependent.  To address this issue,
GNAT also supplies an alternate implementation of the stream attributes
`Read' and `Write', which uses the target-independent XDR standard
representation for scalar types.

The XDR implementation is provided as an alternative body of the
`System.Stream_Attributes' package, in the file `s-stratt-xdr.adb' in
the GNAT library.  There is no `s-stratt-xdr.ads' file.  In order to
install the XDR implementation, do the following:

   * Replace the default implementation of the
     `System.Stream_Attributes' package with the XDR implementation.
     For example on a Unix platform issue the commands:

         $ mv s-stratt.adb s-stratt-default.adb
         $ mv s-stratt-xdr.adb s-stratt.adb

   * Rebuild the GNAT run-time library as documented in the `GNAT and
     Libraries' section of the `GNAT User's Guide'.


File: gnat_rm.info,  Node: RM A 1 52 Names of Predefined Numeric Types,  Next: RM A 3 2 49 Ada Characters Handling,  Prev: RM 13 13 2 17 Stream Oriented Attributes,  Up: Implementation Advice

6.33 RM A.1(52): Names of Predefined Numeric Types
==================================================

     "If an implementation provides additional named predefined integer
     types, then the names should end with `Integer' as in
     `Long_Integer'.  If an implementation provides additional named
     predefined floating point types, then the names should end with
     `Float' as in `Long_Float'."

Followed.


File: gnat_rm.info,  Node: RM A 3 2 49 Ada Characters Handling,  Next: RM A 4 4 106 Bounded-Length String Handling,  Prev: RM A 1 52 Names of Predefined Numeric Types,  Up: Implementation Advice

6.34 RM A.3.2(49): `Ada.Characters.Handling'
============================================

     "If an implementation provides a localized definition of
     `Character' or `Wide_Character', then the effects of the
     subprograms in `Characters.Handling' should reflect the
     localizations.  See also 3.5.2."

Followed.  GNAT provides no such localized definitions.


File: gnat_rm.info,  Node: RM A 4 4 106 Bounded-Length String Handling,  Next: RM A 5 2 46-47 Random Number Generation,  Prev: RM A 3 2 49 Ada Characters Handling,  Up: Implementation Advice

6.35 RM A.4.4(106): Bounded-Length String Handling
==================================================

     "Bounded string objects should not be implemented by implicit
     pointers and dynamic allocation."

Followed.  No implicit pointers or dynamic allocation are used.


File: gnat_rm.info,  Node: RM A 5 2 46-47 Random Number Generation,  Next: RM A 10 7 23 Get_Immediate,  Prev: RM A 4 4 106 Bounded-Length String Handling,  Up: Implementation Advice

6.36 RM A.5.2(46-47): Random Number Generation
==============================================

     "Any storage associated with an object of type `Generator' should
     be reclaimed on exit from the scope of the object."

Followed.

     "If the generator period is sufficiently long in relation to the
     number of distinct initiator values, then each possible value of
     `Initiator' passed to `Reset' should initiate a sequence of random
     numbers that does not, in a practical sense, overlap the sequence
     initiated by any other value.  If this is not possible, then the
     mapping between initiator values and generator states should be a
     rapidly varying function of the initiator value."

Followed.  The generator period is sufficiently long for the first
condition here to hold true.


File: gnat_rm.info,  Node: RM A 10 7 23 Get_Immediate,  Next: RM B 1 39-41 Pragma Export,  Prev: RM A 5 2 46-47 Random Number Generation,  Up: Implementation Advice

6.37 RM A.10.7(23): `Get_Immediate'
===================================

     "The `Get_Immediate' procedures should be implemented with
     unbuffered input.  For a device such as a keyboard, input should be
     available if a key has already been typed, whereas for a disk
     file, input should always be available except at end of file.  For
     a file associated with a keyboard-like device, any line-editing
     features of the underlying operating system should be disabled
     during the execution of `Get_Immediate'."

Followed on all targets except VxWorks. For VxWorks, there is no way to
provide this functionality that does not result in the input buffer
being flushed before the `Get_Immediate' call. A special unit
`Interfaces.Vxworks.IO' is provided that contains routines to enable
this functionality.


File: gnat_rm.info,  Node: RM B 1 39-41 Pragma Export,  Next: RM B 2 12-13 Package Interfaces,  Prev: RM A 10 7 23 Get_Immediate,  Up: Implementation Advice

6.38 RM B.1(39-41): Pragma `Export'
===================================

     "If an implementation supports pragma `Export' to a given language,
     then it should also allow the main subprogram to be written in that
     language.  It should support some mechanism for invoking the
     elaboration of the Ada library units included in the system, and
     for invoking the finalization of the environment task.  On typical
     systems, the recommended mechanism is to provide two subprograms
     whose link names are `adainit' and `adafinal'.  `adainit' should
     contain the elaboration code for library units.  `adafinal' should
     contain the finalization code.  These subprograms should have no
     effect the second and subsequent time they are called."

Followed.

     "Automatic elaboration of pre-elaborated packages should be
     provided when pragma `Export' is supported."

Followed when the main program is in Ada.  If the main program is in a
foreign language, then `adainit' must be called to elaborate
pre-elaborated packages.

     "For each supported convention `L' other than `Intrinsic', an
     implementation should support `Import' and `Export' pragmas for
     objects of `L'-compatible types and for subprograms, and pragma
     `Convention' for `L'-eligible types and for subprograms, presuming
     the other language has corresponding features.  Pragma
     `Convention' need not be supported for scalar types."

Followed.


File: gnat_rm.info,  Node: RM B 2 12-13 Package Interfaces,  Next: RM B 3 63-71 Interfacing with C,  Prev: RM B 1 39-41 Pragma Export,  Up: Implementation Advice

6.39 RM B.2(12-13): Package `Interfaces'
========================================

     "For each implementation-defined convention identifier, there
     should be a child package of package Interfaces with the
     corresponding name.  This package should contain any declarations
     that would be useful for interfacing to the language
     (implementation) represented by the convention.  Any declarations
     useful for interfacing to any language on the given hardware
     architecture should be provided directly in `Interfaces'."

Followed.

     "An implementation supporting an interface to C, COBOL, or Fortran
     should provide the corresponding package or packages described in
     the following clauses."

Followed.  GNAT provides all the packages described in this section.


File: gnat_rm.info,  Node: RM B 3 63-71 Interfacing with C,  Next: RM B 4 95-98 Interfacing with COBOL,  Prev: RM B 2 12-13 Package Interfaces,  Up: Implementation Advice

6.40 RM B.3(63-71): Interfacing with C
======================================

     "An implementation should support the following interface
     correspondences between Ada and C."

Followed.

     "An Ada procedure corresponds to a void-returning C function."

Followed.

     "An Ada function corresponds to a non-void C function."

Followed.

     "An Ada `in' scalar parameter is passed as a scalar argument to a C
     function."

Followed.

     "An Ada `in' parameter of an access-to-object type with designated
     type `T' is passed as a `t*' argument to a C function, where `t'
     is the C type corresponding to the Ada type `T'."

Followed.

     "An Ada access `T' parameter, or an Ada `out' or `in out'
     parameter of an elementary type `T', is passed as a `t*' argument
     to a C function, where `t' is the C type corresponding to the Ada
     type `T'.  In the case of an elementary `out' or `in out'
     parameter, a pointer to a temporary copy is used to preserve
     by-copy semantics."

Followed.

     "An Ada parameter of a record type `T', of any mode, is passed as a
     `t*' argument to a C function, where `t' is the C structure
     corresponding to the Ada type `T'."

Followed.  This convention may be overridden by the use of the
C_Pass_By_Copy pragma, or Convention, or by explicitly specifying the
mechanism for a given call using an extended import or export pragma.

     "An Ada parameter of an array type with component type `T', of any
     mode, is passed as a `t*' argument to a C function, where `t' is
     the C type corresponding to the Ada type `T'."

Followed.

     "An Ada parameter of an access-to-subprogram type is passed as a
     pointer to a C function whose prototype corresponds to the
     designated subprogram's specification."

Followed.


File: gnat_rm.info,  Node: RM B 4 95-98 Interfacing with COBOL,  Next: RM B 5 22-26 Interfacing with Fortran,  Prev: RM B 3 63-71 Interfacing with C,  Up: Implementation Advice

6.41 RM B.4(95-98): Interfacing with COBOL
==========================================

     "An Ada implementation should support the following interface
     correspondences between Ada and COBOL."

Followed.

     "An Ada access `T' parameter is passed as a `BY REFERENCE' data
     item of the COBOL type corresponding to `T'."

Followed.

     "An Ada in scalar parameter is passed as a `BY CONTENT' data item
     of the corresponding COBOL type."

Followed.

     "Any other Ada parameter is passed as a `BY REFERENCE' data item
     of the COBOL type corresponding to the Ada parameter type; for
     scalars, a local copy is used if necessary to ensure by-copy
     semantics."

Followed.


File: gnat_rm.info,  Node: RM B 5 22-26 Interfacing with Fortran,  Next: RM C 1 3-5 Access to Machine Operations,  Prev: RM B 4 95-98 Interfacing with COBOL,  Up: Implementation Advice

6.42 RM B.5(22-26): Interfacing with Fortran
============================================

     "An Ada implementation should support the following interface
     correspondences between Ada and Fortran:"

Followed.

     "An Ada procedure corresponds to a Fortran subroutine."

Followed.

     "An Ada function corresponds to a Fortran function."

Followed.

     "An Ada parameter of an elementary, array, or record type `T' is
     passed as a `T' argument to a Fortran procedure, where `T' is the
     Fortran type corresponding to the Ada type `T', and where the
     INTENT attribute of the corresponding dummy argument matches the
     Ada formal parameter mode; the Fortran implementation's parameter
     passing conventions are used.  For elementary types, a local copy
     is used if necessary to ensure by-copy semantics."

Followed.

     "An Ada parameter of an access-to-subprogram type is passed as a
     reference to a Fortran procedure whose interface corresponds to the
     designated subprogram's specification."

Followed.


File: gnat_rm.info,  Node: RM C 1 3-5 Access to Machine Operations,  Next: RM C 1 10-16 Access to Machine Operations,  Prev: RM B 5 22-26 Interfacing with Fortran,  Up: Implementation Advice

6.43 RM C.1(3-5): Access to Machine Operations
==============================================

     "The machine code or intrinsic support should allow access to all
     operations normally available to assembly language programmers for
     the target environment, including privileged instructions, if any."

Followed.

     "The interfacing pragmas (see Annex B) should support interface to
     assembler; the default assembler should be associated with the
     convention identifier `Assembler'."

Followed.

     "If an entity is exported to assembly language, then the
     implementation should allocate it at an addressable location, and
     should ensure that it is retained by the linking process, even if
     not otherwise referenced from the Ada code.  The implementation
     should assume that any call to a machine code or assembler
     subprogram is allowed to read or update every object that is
     specified as exported."

Followed.


File: gnat_rm.info,  Node: RM C 1 10-16 Access to Machine Operations,  Next: RM C 3 28 Interrupt Support,  Prev: RM C 1 3-5 Access to Machine Operations,  Up: Implementation Advice

6.44 RM C.1(10-16): Access to Machine Operations
================================================

     "The implementation should ensure that little or no overhead is
     associated with calling intrinsic and machine-code subprograms."

Followed for both intrinsics and machine-code subprograms.

     "It is recommended that intrinsic subprograms be provided for
     convenient access to any machine operations that provide special
     capabilities or efficiency and that are not otherwise available
     through the language constructs."

Followed.  A full set of machine operation intrinsic subprograms is
provided.

     "Atomic read-modify-write operations--e.g., test and set, compare
     and swap, decrement and test, enqueue/dequeue."

Followed on any target supporting such operations.

     "Standard numeric functions--e.g.:, sin, log."

Followed on any target supporting such operations.

     "String manipulation operations--e.g.:, translate and test."

Followed on any target supporting such operations.

     "Vector operations--e.g.:, compare vector against thresholds."

Followed on any target supporting such operations.

     "Direct operations on I/O ports."

Followed on any target supporting such operations.


File: gnat_rm.info,  Node: RM C 3 28 Interrupt Support,  Next: RM C 3 1 20-21 Protected Procedure Handlers,  Prev: RM C 1 10-16 Access to Machine Operations,  Up: Implementation Advice

6.45 RM C.3(28): Interrupt Support
==================================

     "If the `Ceiling_Locking' policy is not in effect, the
     implementation should provide means for the application to specify
     which interrupts are to be blocked during protected actions, if
     the underlying system allows for a finer-grain control of
     interrupt blocking."

Followed.  The underlying system does not allow for finer-grain control
of interrupt blocking.


File: gnat_rm.info,  Node: RM C 3 1 20-21 Protected Procedure Handlers,  Next: RM C 3 2 25 Package Interrupts,  Prev: RM C 3 28 Interrupt Support,  Up: Implementation Advice

6.46 RM C.3.1(20-21): Protected Procedure Handlers
==================================================

     "Whenever possible, the implementation should allow interrupt
     handlers to be called directly by the hardware."

Followed on any target where the underlying operating system permits
such direct calls.

     "Whenever practical, violations of any implementation-defined
     restrictions should be detected before run time."

Followed.  Compile time warnings are given when possible.


File: gnat_rm.info,  Node: RM C 3 2 25 Package Interrupts,  Next: RM C 4 14 Pre-elaboration Requirements,  Prev: RM C 3 1 20-21 Protected Procedure Handlers,  Up: Implementation Advice

6.47 RM C.3.2(25): Package `Interrupts'
=======================================

     "If implementation-defined forms of interrupt handler procedures
     are supported, such as protected procedures with parameters, then
     for each such form of a handler, a type analogous to
     `Parameterless_Handler' should be specified in a child package of
     `Interrupts', with the same operations as in the predefined
     package Interrupts."

Followed.


File: gnat_rm.info,  Node: RM C 4 14 Pre-elaboration Requirements,  Next: RM C 5 8 Pragma Discard_Names,  Prev: RM C 3 2 25 Package Interrupts,  Up: Implementation Advice

6.48 RM C.4(14): Pre-elaboration Requirements
=============================================

     "It is recommended that pre-elaborated packages be implemented in
     such a way that there should be little or no code executed at run
     time for the elaboration of entities not already covered by the
     Implementation Requirements."

Followed.  Executable code is generated in some cases, e.g., loops to
initialize large arrays.


File: gnat_rm.info,  Node: RM C 5 8 Pragma Discard_Names,  Next: RM C 7 2 30 The Package Task_Attributes,  Prev: RM C 4 14 Pre-elaboration Requirements,  Up: Implementation Advice

6.49 RM C.5(8): Pragma `Discard_Names'
======================================

     "If the pragma applies to an entity, then the implementation should
     reduce the amount of storage used for storing names associated
     with that entity."

Followed.


File: gnat_rm.info,  Node: RM C 7 2 30 The Package Task_Attributes,  Next: RM D 3 17 Locking Policies,  Prev: RM C 5 8 Pragma Discard_Names,  Up: Implementation Advice

6.50 RM C.7.2(30): The Package Task_Attributes
==============================================

     "Some implementations are targeted to domains in which memory use
     at run time must be completely deterministic.  For such
     implementations, it is recommended that the storage for task
     attributes will be pre-allocated statically and not from the heap.
     This can be accomplished by either placing restrictions on the
     number and the size of the task's attributes, or by using the
     pre-allocated storage for the first `N' attribute objects, and the
     heap for the others.  In the latter case, `N' should be
     documented."

Not followed.  This implementation is not targeted to such a domain.


File: gnat_rm.info,  Node: RM D 3 17 Locking Policies,  Next: RM D 4 16 Entry Queuing Policies,  Prev: RM C 7 2 30 The Package Task_Attributes,  Up: Implementation Advice

6.51 RM D.3(17): Locking Policies
=================================

     "The implementation should use names that end with `_Locking' for
     locking policies defined by the implementation."

Followed.  Two implementation-defined locking policies are defined,
whose names (`Inheritance_Locking' and `Concurrent_Readers_Locking')
follow this suggestion.


File: gnat_rm.info,  Node: RM D 4 16 Entry Queuing Policies,  Next: RM D 6 9-10 Preemptive Abort,  Prev: RM D 3 17 Locking Policies,  Up: Implementation Advice

6.52 RM D.4(16): Entry Queuing Policies
=======================================

     "Names that end with `_Queuing' should be used for all
     implementation-defined queuing policies."

Followed.  No such implementation-defined queuing policies exist.


File: gnat_rm.info,  Node: RM D 6 9-10 Preemptive Abort,  Next: RM D 7 21 Tasking Restrictions,  Prev: RM D 4 16 Entry Queuing Policies,  Up: Implementation Advice

6.53 RM D.6(9-10): Preemptive Abort
===================================

     "Even though the `abort_statement' is included in the list of
     potentially blocking operations (see 9.5.1), it is recommended
     that this statement be implemented in a way that never requires
     the task executing the `abort_statement' to block."

Followed.

     "On a multi-processor, the delay associated with aborting a task on
     another processor should be bounded; the implementation should use
     periodic polling, if necessary, to achieve this."

Followed.


File: gnat_rm.info,  Node: RM D 7 21 Tasking Restrictions,  Next: RM D 8 47-49 Monotonic Time,  Prev: RM D 6 9-10 Preemptive Abort,  Up: Implementation Advice

6.54 RM D.7(21): Tasking Restrictions
=====================================

     "When feasible, the implementation should take advantage of the
     specified restrictions to produce a more efficient implementation."

GNAT currently takes advantage of these restrictions by providing an
optimized run time when the Ravenscar profile and the GNAT restricted
run time set of restrictions are specified.  See pragma `Profile
(Ravenscar)' and pragma `Profile (Restricted)' for more details.


File: gnat_rm.info,  Node: RM D 8 47-49 Monotonic Time,  Next: RM E 5 28-29 Partition Communication Subsystem,  Prev: RM D 7 21 Tasking Restrictions,  Up: Implementation Advice

6.55 RM D.8(47-49): Monotonic Time
==================================

     "When appropriate, implementations should provide configuration
     mechanisms to change the value of `Tick'."

Such configuration mechanisms are not appropriate to this implementation
and are thus not supported.

     "It is recommended that `Calendar.Clock' and `Real_Time.Clock' be
     implemented as transformations of the same time base."

Followed.

     "It is recommended that the best time base which exists in the
     underlying system be available to the application through `Clock'.
     `Best' may mean highest accuracy or largest range."

Followed.


File: gnat_rm.info,  Node: RM E 5 28-29 Partition Communication Subsystem,  Next: RM F 7 COBOL Support,  Prev: RM D 8 47-49 Monotonic Time,  Up: Implementation Advice

6.56 RM E.5(28-29): Partition Communication Subsystem
=====================================================

     "Whenever possible, the PCS on the called partition should allow
     for multiple tasks to call the RPC-receiver with different
     messages and should allow them to block until the corresponding
     subprogram body returns."

Followed by GLADE, a separately supplied PCS that can be used with GNAT.

     "The `Write' operation on a stream of type `Params_Stream_Type'
     should raise `Storage_Error' if it runs out of space trying to
     write the `Item' into the stream."

Followed by GLADE, a separately supplied PCS that can be used with GNAT.


File: gnat_rm.info,  Node: RM F 7 COBOL Support,  Next: RM F 1 2 Decimal Radix Support,  Prev: RM E 5 28-29 Partition Communication Subsystem,  Up: Implementation Advice

6.57 RM F(7): COBOL Support
===========================

     "If COBOL (respectively, C) is widely supported in the target
     environment, implementations supporting the Information Systems
     Annex should provide the child package `Interfaces.COBOL'
     (respectively, `Interfaces.C') specified in Annex B and should
     support a `convention_identifier' of COBOL (respectively, C) in
     the interfacing pragmas (see Annex B), thus allowing Ada programs
     to interface with programs written in that language."

Followed.


File: gnat_rm.info,  Node: RM F 1 2 Decimal Radix Support,  Next: RM G Numerics,  Prev: RM F 7 COBOL Support,  Up: Implementation Advice

6.58 RM F.1(2): Decimal Radix Support
=====================================

     "Packed decimal should be used as the internal representation for
     objects of subtype `S' when `S''Machine_Radix = 10."

Not followed.  GNAT ignores `S''Machine_Radix and always uses binary
representations.


File: gnat_rm.info,  Node: RM G Numerics,  Next: RM G 1 1 56-58 Complex Types,  Prev: RM F 1 2 Decimal Radix Support,  Up: Implementation Advice

6.59 RM G: Numerics
===================

     "If Fortran (respectively, C) is widely supported in the target
     environment, implementations supporting the Numerics Annex should
     provide the child package `Interfaces.Fortran' (respectively,
     `Interfaces.C') specified in Annex B and should support a
     `convention_identifier' of Fortran (respectively, C) in the
     interfacing pragmas (see Annex B), thus allowing Ada programs to
     interface with programs written in that language."

Followed.


File: gnat_rm.info,  Node: RM G 1 1 56-58 Complex Types,  Next: RM G 1 2 49 Complex Elementary Functions,  Prev: RM G Numerics,  Up: Implementation Advice

6.60 RM G.1.1(56-58): Complex Types
===================================

     "Because the usual mathematical meaning of multiplication of a
     complex operand and a real operand is that of the scaling of both
     components of the former by the latter, an implementation should
     not perform this operation by first promoting the real operand to
     complex type and then performing a full complex multiplication.
     In systems that, in the future, support an Ada binding to IEC
     559:1989, the latter technique will not generate the required
     result when one of the components of the complex operand is
     infinite.  (Explicit multiplication of the infinite component by
     the zero component obtained during promotion yields a NaN that
     propagates into the final result.) Analogous advice applies in the
     case of multiplication of a complex operand and a pure-imaginary
     operand, and in the case of division of a complex operand by a
     real or pure-imaginary operand."

Not followed.

     "Similarly, because the usual mathematical meaning of addition of a
     complex operand and a real operand is that the imaginary operand
     remains unchanged, an implementation should not perform this
     operation by first promoting the real operand to complex type and
     then performing a full complex addition.  In implementations in
     which the `Signed_Zeros' attribute of the component type is `True'
     (and which therefore conform to IEC 559:1989 in regard to the
     handling of the sign of zero in predefined arithmetic operations),
     the latter technique will not generate the required result when
     the imaginary component of the complex operand is a negatively
     signed zero.  (Explicit addition of the negative zero to the zero
     obtained during promotion yields a positive zero.)  Analogous
     advice applies in the case of addition of a complex operand and a
     pure-imaginary operand, and in the case of subtraction of a
     complex operand and a real or pure-imaginary operand."

Not followed.

     "Implementations in which `Real'Signed_Zeros' is `True' should
     attempt to provide a rational treatment of the signs of zero
     results and result components.  As one example, the result of the
     `Argument' function should have the sign of the imaginary
     component of the parameter `X' when the point represented by that
     parameter lies on the positive real axis; as another, the sign of
     the imaginary component of the `Compose_From_Polar' function
     should be the same as (respectively, the opposite of) that of the
     `Argument' parameter when that parameter has a value of zero and
     the `Modulus' parameter has a nonnegative (respectively, negative)
     value."

Followed.


File: gnat_rm.info,  Node: RM G 1 2 49 Complex Elementary Functions,  Next: RM G 2 4 19 Accuracy Requirements,  Prev: RM G 1 1 56-58 Complex Types,  Up: Implementation Advice

6.61 RM G.1.2(49): Complex Elementary Functions
===============================================

     "Implementations in which `Complex_Types.Real'Signed_Zeros' is
     `True' should attempt to provide a rational treatment of the signs
     of zero results and result components.  For example, many of the
     complex elementary functions have components that are odd
     functions of one of the parameter components; in these cases, the
     result component should have the sign of the parameter component
     at the origin.  Other complex elementary functions have zero
     components whose sign is opposite that of a parameter component at
     the origin, or is always positive or always negative."

Followed.


File: gnat_rm.info,  Node: RM G 2 4 19 Accuracy Requirements,  Next: RM G 2 6 15 Complex Arithmetic Accuracy,  Prev: RM G 1 2 49 Complex Elementary Functions,  Up: Implementation Advice

6.62 RM G.2.4(19): Accuracy Requirements
========================================

     "The versions of the forward trigonometric functions without a
     `Cycle' parameter should not be implemented by calling the
     corresponding version with a `Cycle' parameter of
     `2.0*Numerics.Pi', since this will not provide the required
     accuracy in some portions of the domain.  For the same reason, the
     version of `Log' without a `Base' parameter should not be
     implemented by calling the corresponding version with a `Base'
     parameter of `Numerics.e'."

Followed.


File: gnat_rm.info,  Node: RM G 2 6 15 Complex Arithmetic Accuracy,  Next: RM H 6 15/2 Pragma Partition_Elaboration_Policy,  Prev: RM G 2 4 19 Accuracy Requirements,  Up: Implementation Advice

6.63 RM G.2.6(15): Complex Arithmetic Accuracy
==============================================

     "The version of the `Compose_From_Polar' function without a
     `Cycle' parameter should not be implemented by calling the
     corresponding version with a `Cycle' parameter of
     `2.0*Numerics.Pi', since this will not provide the required
     accuracy in some portions of the domain."

Followed.


File: gnat_rm.info,  Node: RM H 6 15/2 Pragma Partition_Elaboration_Policy,  Prev: RM G 2 6 15 Complex Arithmetic Accuracy,  Up: Implementation Advice

6.64 RM H.6(15/2): Pragma Partition_Elaboration_Policy
======================================================

     "If the partition elaboration policy is `Sequential' and the
     Environment task becomes permanently blocked during elaboration
     then the partition is deadlocked and it is recommended that the
     partition be immediately terminated."

Not followed.


File: gnat_rm.info,  Node: Implementation Defined Characteristics,  Next: Intrinsic Subprograms,  Prev: Implementation Advice,  Up: Top

7 Implementation Defined Characteristics
****************************************

In addition to the implementation dependent pragmas and attributes, and
the implementation advice, there are a number of other Ada features
that are potentially implementation dependent and are designated as
implementation-defined. These are mentioned throughout the Ada Reference
Manual, and are summarized in Annex M.

A requirement for conforming Ada compilers is that they provide
documentation describing how the implementation deals with each of these
issues.  In this chapter you will find each point in Annex M listed,
followed by a description of how GNAT handles the implementation
dependence.

You can use this chapter as a guide to minimizing implementation
dependent features in your programs if portability to other compilers
and other operating systems is an important consideration.  The numbers
in each entry below correspond to the paragraph numbers in the Ada
Reference Manual.

   * "Whether or not each recommendation given in Implementation Advice
     is followed.  See 1.1.2(37)."

See *Note Implementation Advice: a.

   * "Capacity limitations of the implementation.  See 1.1.3(3)."

The complexity of programs that can be processed is limited only by the
total amount of available virtual memory, and disk space for the
generated object files.

   * "Variations from the standard that are impractical to avoid given
     the implementation's execution environment.  See 1.1.3(6)."

There are no variations from the standard.

   * "Which code_statements cause external interactions.  See
     1.1.3(10)."

Any `code_statement' can potentially cause external interactions.

   * "The coded representation for the text of an Ada program.  See
     2.1(4)."

See separate section on source representation.

   * "The control functions allowed in comments.  See 2.1(14)."

See separate section on source representation.

   * "The representation for an end of line.  See 2.2(2)."

See separate section on source representation.

   * "Maximum supported line length and lexical element length.  See
     2.2(15)."

The maximum line length is 255 characters and the maximum length of a
lexical element is also 255 characters. This is the default setting if
not overridden by the use of compiler switch `-gnaty' (which sets the
maximum to 79) or `-gnatyMnn' which allows the maximum line length to
be specified to be any value up to 32767. The maximum length of a
lexical element is the same as the maximum line length.

   * "Implementation defined pragmas.  See 2.8(14)."

See *Note Implementation Defined Pragmas: 7.

   * "Effect of pragma `Optimize'.  See 2.8(27)."

Pragma `Optimize', if given with a `Time' or `Space' parameter, checks
that the optimization flag is set, and aborts if it is not.

   * "The sequence of characters of the value returned by `S'Image'
     when some of the graphic characters of `S'Wide_Image' are not
     defined in `Character'.  See 3.5(37)."

The sequence of characters is as defined by the wide character encoding
method used for the source.  See section on source representation for
further details.

   * "The predefined integer types declared in `Standard'.  See
     3.5.4(25)."

Type                       Representation
----------------------------------------------------------------------- 
`Short_Short_Integer'      8 bit signed
`Short_Integer'            (Short) 16 bit signed
`Integer'                  32 bit signed
`Long_Integer'             64 bit signed (on most 64 bit targets,
                           depending on the C definition of long).
                           32 bit signed (all other targets)
`Long_Long_Integer'        64 bit signed

   * "Any nonstandard integer types and the operators defined for them.
     See 3.5.4(26)."

There are no nonstandard integer types.

   * "Any nonstandard real types and the operators defined for them.
     See 3.5.6(8)."

There are no nonstandard real types.

   * "What combinations of requested decimal precision and range are
     supported for floating point types.  See 3.5.7(7)."

The precision and range is as defined by the IEEE standard.

   * "The predefined floating point types declared in `Standard'.  See
     3.5.7(16)."

Type                       Representation
------------------------------------------------------------------------------------- 
`Short_Float'              32 bit IEEE short
`Float'                    (Short) 32 bit IEEE short
`Long_Float'               64 bit IEEE long
`Long_Long_Float'          64 bit IEEE long (80 bit IEEE long on x86 processors)

   * "The small of an ordinary fixed point type.  See 3.5.9(8)."

`Fine_Delta' is 2**(-63)

   * "What combinations of small, range, and digits are supported for
     fixed point types.  See 3.5.9(10)."

Any combinations are permitted that do not result in a small less than
`Fine_Delta' and do not result in a mantissa larger than 63 bits.  If
the mantissa is larger than 53 bits on machines where Long_Long_Float
is 64 bits (true of all architectures except ia32), then the output from
Text_IO is accurate to only 53 bits, rather than the full mantissa.
This is because floating-point conversions are used to convert fixed
point.

   * "The result of `Tags.Expanded_Name' for types declared within an
     unnamed `block_statement'.  See 3.9(10)."

Block numbers of the form `B`nnn`', where `nnn' is a decimal integer
are allocated.

   * "Implementation-defined attributes.  See 4.1.4(12)."

See *Note Implementation Defined Attributes: 8.

   * "Any implementation-defined time types.  See 9.6(6)."

There are no implementation-defined time types.

   * "The time base associated with relative delays."

See 9.6(20).  The time base used is that provided by the C library
function `gettimeofday'.

   * "The time base of the type `Calendar.Time'.  See 9.6(23)."

The time base used is that provided by the C library function
`gettimeofday'.

   * "The time zone used for package `Calendar' operations.  See
     9.6(24)."

The time zone used by package `Calendar' is the current system time zone
setting for local time, as accessed by the C library function
`localtime'.

   * "Any limit on `delay_until_statements' of `select_statements'.
     See 9.6(29)."

There are no such limits.

   * "Whether or not two non-overlapping parts of a composite object
     are independently addressable, in the case where packing, record
     layout, or `Component_Size' is specified for the object.  See
     9.10(1)."

Separate components are independently addressable if they do not share
overlapping storage units.

   * "The representation for a compilation.  See 10.1(2)."

A compilation is represented by a sequence of files presented to the
compiler in a single invocation of the `gcc' command.

   * "Any restrictions on compilations that contain multiple
     compilation_units.  See 10.1(4)."

No single file can contain more than one compilation unit, but any
sequence of files can be presented to the compiler as a single
compilation.

   * "The mechanisms for creating an environment and for adding and
     replacing compilation units.  See 10.1.4(3)."

See separate section on compilation model.

   * "The manner of explicitly assigning library units to a partition.
     See 10.2(2)."

If a unit contains an Ada main program, then the Ada units for the
partition are determined by recursive application of the rules in the
Ada Reference Manual section 10.2(2-6).  In other words, the Ada units
will be those that are needed by the main program, and then this
definition of need is applied recursively to those units, and the
partition contains the transitive closure determined by this
relationship.  In short, all the necessary units are included, with no
need to explicitly specify the list.  If additional units are required,
e.g., by foreign language units, then all units must be mentioned in
the context clause of one of the needed Ada units.

If the partition contains no main program, or if the main program is in
a language other than Ada, then GNAT provides the binder options `-z'
and `-n' respectively, and in this case a list of units can be
explicitly supplied to the binder for inclusion in the partition (all
units needed by these units will also be included automatically).  For
full details on the use of these options, refer to the `GNAT Make
Program gnatmake' in the `GNAT User's Guide'.

   * "The implementation-defined means, if any, of specifying which
     compilation units are needed by a given compilation unit.  See
     10.2(2)."

The units needed by a given compilation unit are as defined in the Ada
Reference Manual section 10.2(2-6).  There are no
implementation-defined pragmas or other implementation-defined means
for specifying needed units.

   * "The manner of designating the main subprogram of a partition.
     See 10.2(7)."

The main program is designated by providing the name of the
corresponding `ALI' file as the input parameter to the binder.

   * "The order of elaboration of `library_items'.  See 10.2(18)."

The first constraint on ordering is that it meets the requirements of
Chapter 10 of the Ada Reference Manual.  This still leaves some
implementation dependent choices, which are resolved by first
elaborating bodies as early as possible (i.e., in preference to specs
where there is a choice), and second by evaluating the immediate with
clauses of a unit to determine the probably best choice, and third by
elaborating in alphabetical order of unit names where a choice still
remains.

   * "Parameter passing and function return for the main subprogram.
     See 10.2(21)."

The main program has no parameters.  It may be a procedure, or a
function returning an integer type.  In the latter case, the returned
integer value is the return code of the program (overriding any value
that may have been set by a call to `Ada.Command_Line.Set_Exit_Status').

   * "The mechanisms for building and running partitions.  See
     10.2(24)."

GNAT itself supports programs with only a single partition.  The
GNATDIST tool provided with the GLADE package (which also includes an
implementation of the PCS) provides a completely flexible method for
building and running programs consisting of multiple partitions.  See
the separate GLADE manual for details.

   * "The details of program execution, including program termination.
     See 10.2(25)."

See separate section on compilation model.

   * "The semantics of any non-active partitions supported by the
     implementation.  See 10.2(28)."

Passive partitions are supported on targets where shared memory is
provided by the operating system.  See the GLADE reference manual for
further details.

   * "The information returned by `Exception_Message'.  See 11.4.1(10)."

Exception message returns the null string unless a specific message has
been passed by the program.

   * "The result of `Exceptions.Exception_Name' for types declared
     within an unnamed `block_statement'.  See 11.4.1(12)."

Blocks have implementation defined names of the form `B`nnn`' where
`nnn' is an integer.

   * "The information returned by `Exception_Information'.  See
     11.4.1(13)."

`Exception_Information' returns a string in the following format:

    *Exception_Name:* nnnnn
    *Message:* mmmmm
    *PID:* ppp
    *Load address:* 0xhhhh
    *Call stack traceback locations:*
    0xhhhh 0xhhhh 0xhhhh ... 0xhhh

where

        * `nnnn' is the fully qualified name of the exception in all
          upper case letters. This line is always present.

        * `mmmm' is the message (this line present only if message is
          non-null)

        * `ppp' is the Process Id value as a decimal integer (this line
          is present only if the Process Id is nonzero). Currently we
          are not making use of this field.

        * The Load address line, the Call stack traceback locations
          line and the following values are present only if at least
          one traceback location was recorded. The Load address
          indicates the address at which the main executable was
          loaded; this line may not be present if operating system
          hasn't relocated the main executable. The values are given in
          C style format, with lower case letters for a-f, and only as
          many digits present as are necessary.  The line terminator
          sequence at the end of each line, including the last line is
          a single `LF' character (`16#0A#').

   * "Implementation-defined check names.  See 11.5(27)."

The implementation defined check name Alignment_Check controls checking
of address clause values for proper alignment (that is, the address
supplied must be consistent with the alignment of the type).

The implementation defined check name Predicate_Check controls whether
predicate checks are generated.

The implementation defined check name Validity_Check controls whether
validity checks are generated.

In addition, a user program can add implementation-defined check names
by means of the pragma Check_Name.

   * "The interpretation of each aspect of representation.  See
     13.1(20)."

See separate section on data representations.

   * "Any restrictions placed upon representation items.  See 13.1(20)."

See separate section on data representations.

   * "The meaning of `Size' for indefinite subtypes.  See 13.3(48)."

Size for an indefinite subtype is the maximum possible size, except that
for the case of a subprogram parameter, the size of the parameter object
is the actual size.

   * "The default external representation for a type tag.  See
     13.3(75)."

The default external representation for a type tag is the fully expanded
name of the type in upper case letters.

   * "What determines whether a compilation unit is the same in two
     different partitions.  See 13.3(76)."

A compilation unit is the same in two different partitions if and only
if it derives from the same source file.

   * "Implementation-defined components.  See 13.5.1(15)."

The only implementation defined component is the tag for a tagged type,
which contains a pointer to the dispatching table.

   * "If `Word_Size' = `Storage_Unit', the default bit ordering.  See
     13.5.3(5)."

`Word_Size' (32) is not the same as `Storage_Unit' (8) for this
implementation, so no non-default bit ordering is supported.  The
default bit ordering corresponds to the natural endianness of the
target architecture.

   * "The contents of the visible part of package `System' and its
     language-defined children.  See 13.7(2)."

See the definition of these packages in files `system.ads' and
`s-stoele.ads'. Note that two declarations are added to package System.

    Max_Priority           : constant Positive := Priority'Last;
    Max_Interrupt_Priority : constant Positive := Interrupt_Priority'Last;

   * "The contents of the visible part of package
     `System.Machine_Code', and the meaning of `code_statements'.  See
     13.8(7)."

See the definition and documentation in file `s-maccod.ads'.

   * "The effect of unchecked conversion.  See 13.9(11)."

Unchecked conversion between types of the same size results in an
uninterpreted transmission of the bits from one type to the other.  If
the types are of unequal sizes, then in the case of discrete types, a
shorter source is first zero or sign extended as necessary, and a
shorter target is simply truncated on the left.  For all non-discrete
types, the source is first copied if necessary to ensure that the
alignment requirements of the target are met, then a pointer is
constructed to the source value, and the result is obtained by
dereferencing this pointer after converting it to be a pointer to the
target type. Unchecked conversions where the target subtype is an
unconstrained array are not permitted. If the target alignment is
greater than the source alignment, then a copy of the result is made
with appropriate alignment

   * "The semantics of operations on invalid representations.  See
     13.9.2(10-11)."

For assignments and other operations where the use of invalid values
cannot result in erroneous behavior, the compiler ignores the
possibility of invalid values. An exception is raised at the point
where an invalid value would result in erroneous behavior. For example
executing:

    procedure invalidvals is
      X : Integer := -1;
      Y : Natural range 1 .. 10;
      for Y'Address use X'Address;
      Z : Natural range 1 .. 10;
      A : array (Natural range 1 .. 10) of Integer;
    begin
      Z := Y;     -- no exception
      A (Z) := 3; -- exception raised;
    end;

As indicated, an exception is raised on the array assignment, but not
on the simple assignment of the invalid negative value from Y to Z.

   * "The manner of choosing a storage pool for an access type when
     `Storage_Pool' is not specified for the type.  See 13.11(17)."

There are 3 different standard pools used by the compiler when
`Storage_Pool' is not specified depending whether the type is local to
a subprogram or defined at the library level and whether
`Storage_Size`is specified or not. See documentation in the runtime
library units `System.Pool_Global', `System.Pool_Size' and
`System.Pool_Local' in files `s-poosiz.ads', `s-pooglo.ads' and
`s-pooloc.ads' for full details on the default pools used.

   * "Whether or not the implementation provides user-accessible names
     for the standard pool type(s).  See 13.11(17)."

See documentation in the sources of the run time mentioned in the
previous paragraph.  All these pools are accessible by means of
`with''ing these units.

   * "The meaning of `Storage_Size'.  See 13.11(18)."

`Storage_Size' is measured in storage units, and refers to the total
space available for an access type collection, or to the primary stack
space for a task.

   * "Implementation-defined aspects of storage pools.  See 13.11(22)."

See documentation in the sources of the run time mentioned in the
paragraph about standard storage pools above for details on
GNAT-defined aspects of storage pools.

   * "The set of restrictions allowed in a pragma `Restrictions'.  See
     13.12(7)."

See *Note Standard and Implementation Defined Restrictions: 9.

   * "The consequences of violating limitations on `Restrictions'
     pragmas.  See 13.12(9)."

Restrictions that can be checked at compile time result in illegalities
if violated.  Currently there are no other consequences of violating
restrictions.

   * "The representation used by the `Read' and `Write' attributes of
     elementary types in terms of stream elements.  See 13.13.2(9)."

The representation is the in-memory representation of the base type of
the type, using the number of bits corresponding to the `type'Size'
value, and the natural ordering of the machine.

   * "The names and characteristics of the numeric subtypes declared in
     the visible part of package `Standard'.  See A.1(3)."

See items describing the integer and floating-point types supported.

   * "The string returned by `Character_Set_Version'.  See A.3.5(3)."

`Ada.Wide_Characters.Handling.Character_Set_Version' returns the string
"Unicode 4.0", referring to version 4.0 of the Unicode specification.

   * "The accuracy actually achieved by the elementary functions.  See
     A.5.1(1)."

The elementary functions correspond to the functions available in the C
library.  Only fast math mode is implemented.

   * "The sign of a zero result from some of the operators or functions
     in `Numerics.Generic_Elementary_Functions', when
     `Float_Type'Signed_Zeros' is `True'.  See A.5.1(46)."

The sign of zeroes follows the requirements of the IEEE 754 standard on
floating-point.

   * "The value of `Numerics.Float_Random.Max_Image_Width'.  See
     A.5.2(27)."

Maximum image width is 6864, see library file `s-rannum.ads'.

   * "The value of `Numerics.Discrete_Random.Max_Image_Width'.  See
     A.5.2(27)."

Maximum image width is 6864, see library file `s-rannum.ads'.

   * "The algorithms for random number generation.  See A.5.2(32)."

The algorithm is the Mersenne Twister, as documented in the source file
`s-rannum.adb'. This version of the algorithm has a period of
2**19937-1.

   * "The string representation of a random number generator's state.
     See A.5.2(38)."

The value returned by the Image function is the concatenation of the
fixed-width decimal representations of the 624 32-bit integers of the
state vector.

   * "The minimum time interval between calls to the time-dependent
     Reset procedure that are guaranteed to initiate different random
     number sequences.  See A.5.2(45)."

The minimum period between reset calls to guarantee distinct series of
random numbers is one microsecond.

   * "The values of the `Model_Mantissa', `Model_Emin',
     `Model_Epsilon', `Model', `Safe_First', and `Safe_Last'
     attributes, if the Numerics Annex is not supported.  See
     A.5.3(72)."

Run the compiler with `-gnatS' to produce a listing of package
`Standard', has the values of all numeric attributes.

   * "Any implementation-defined characteristics of the input-output
     packages.  See A.7(14)."

There are no special implementation defined characteristics for these
packages.

   * "The value of `Buffer_Size' in `Storage_IO'.  See A.9(10)."

All type representations are contiguous, and the `Buffer_Size' is the
value of `type'Size' rounded up to the next storage unit boundary.

   * "External files for standard input, standard output, and standard
     error See A.10(5)."

These files are mapped onto the files provided by the C streams
libraries.  See source file `i-cstrea.ads' for further details.

   * "The accuracy of the value produced by `Put'.  See A.10.9(36)."

If more digits are requested in the output than are represented by the
precision of the value, zeroes are output in the corresponding least
significant digit positions.

   * "The meaning of `Argument_Count', `Argument', and `Command_Name'.
     See A.15(1)."

These are mapped onto the `argv' and `argc' parameters of the main
program in the natural manner.

   * "The interpretation of the `Form' parameter in procedure
     `Create_Directory'.  See A.16(56)."

The `Form' parameter is not used.

   * "The interpretation of the `Form' parameter in procedure
     `Create_Path'.  See A.16(60)."

The `Form' parameter is not used.

   * "The interpretation of the `Form' parameter in procedure
     `Copy_File'.  See A.16(68)."

The `Form' parameter is case-insensitive.  Two fields are recognized in
the `Form' parameter:

    *preserve=<value>*
    *mode=<value>*

<value> starts immediately after the character '=' and ends with the
character immediately preceding the next comma (',') or with the last
character of the parameter.

The only possible values for preserve= are:

Value                  Meaning
----------------------------------------------------------------------------------------------- 
`no_attributes'        Do not try to preserve any file attributes. This is the default if no
                       preserve= is found in Form.
`all_attributes'       Try to preserve all file attributes (timestamps, access rights).
`timestamps'           Preserve the timestamp of the copied file, but not the other file
                       attributes.

The only possible values for mode= are:

Value              Meaning
------------------------------------------------------------------------------------------------------- 
`copy'             Only do the copy if the destination file does not already exist.  If it already
                   exists, Copy_File fails.
`overwrite'        Copy the file in all cases. Overwrite an already existing destination file.
`append'           Append the original file to the destination file. If the destination file does not
                   exist, the destination file is a copy of the source file.  When mode=append, the
                   field preserve=, if it exists, is not taken into account.

If the Form parameter includes one or both of the fields and the value
or values are incorrect, Copy_file fails with Use_Error.

Examples of correct Forms:

    Form => "preserve=no_attributes,mode=overwrite" (the default)
    Form => "mode=append"
    Form => "mode=copy, preserve=all_attributes"

Examples of incorrect Forms:

    Form => "preserve=junk"
    Form => "mode=internal, preserve=timestamps"

   * "The interpretation of the `Pattern' parameter, when not the null
     string, in the `Start_Search' and `Search' procedures.  See
     A.16(104) and A.16(112)."

When the `Pattern' parameter is not the null string, it is interpreted
according to the syntax of regular expressions as defined in the
`GNAT.Regexp' package.

See *Note GNAT.Regexp (g-regexp.ads): 1ff.

   * "Implementation-defined convention names.  See B.1(11)."

The following convention names are supported

Convention Name             Interpretation
--------------------------------------------------------------------------------------------------------------- 
`Ada'                       Ada
`Ada_Pass_By_Copy'          Allowed for any types except by-reference types such as limited records.
                            Compatible with convention Ada, but causes any parameters with this convention to
                            be passed by copy.
`Ada_Pass_By_Reference'     Allowed for any types except by-copy types such as scalars.  Compatible with
                            convention Ada, but causes any parameters with this convention to be passed by
                            reference.
`Assembler'                 Assembly language
`Asm'                       Synonym for Assembler
`Assembly'                  Synonym for Assembler
`C'                         C
`C_Pass_By_Copy'            Allowed only for record types, like C, but also notes that record is to be passed
                            by copy rather than reference.
`COBOL'                     COBOL
`C_Plus_Plus (or CPP)'      C++
`Default'                   Treated the same as C
`External'                  Treated the same as C
`Fortran'                   Fortran
`Intrinsic'                 For support of pragma `Import' with convention Intrinsic, see separate section on
                            Intrinsic Subprograms.
`Stdcall'                   Stdcall (used for Windows implementations only).  This convention correspond to
                            the WINAPI (previously called Pascal convention) C/C++ convention under Windows.
                            A routine with this convention cleans the stack before exit. This pragma cannot
                            be applied to a dispatching call.
`DLL'                       Synonym for Stdcall
`Win32'                     Synonym for Stdcall
`Stubbed'                   Stubbed is a special convention used to indicate that the body of the subprogram
                            will be entirely ignored.  Any call to the subprogram is converted into a raise
                            of the `Program_Error' exception.  If a pragma `Import' specifies convention
                            `stubbed' then no body need be present at all.  This convention is useful during
                            development for the inclusion of subprograms whose body has not yet been written.
                            In addition, all otherwise unrecognized convention names are also treated as
                            being synonymous with convention C.  In all implementations except for VMS, use
                            of such other names results in a warning.  In VMS implementations, these names
                            are accepted silently.

   * "The meaning of link names.  See B.1(36)."

Link names are the actual names used by the linker.

   * "The manner of choosing link names when neither the link name nor
     the address of an imported or exported entity is specified.  See
     B.1(36)."

The default linker name is that which would be assigned by the relevant
external language, interpreting the Ada name as being in all lower case
letters.

   * "The effect of pragma `Linker_Options'.  See B.1(37)."

The string passed to `Linker_Options' is presented uninterpreted as an
argument to the link command, unless it contains ASCII.NUL characters.
NUL characters if they appear act as argument separators, so for example

    pragma Linker_Options ("-labc" & ASCII.NUL & "-ldef");

causes two separate arguments `-labc' and `-ldef' to be passed to the
linker. The order of linker options is preserved for a given unit. The
final list of options passed to the linker is in reverse order of the
elaboration order. For example, linker options for a body always appear
before the options from the corresponding package spec.

   * "The contents of the visible part of package `Interfaces' and its
     language-defined descendants.  See B.2(1)."

See files with prefix `i-' in the distributed library.

   * "Implementation-defined children of package `Interfaces'.  The
     contents of the visible part of package `Interfaces'.  See
     B.2(11)."

See files with prefix `i-' in the distributed library.

   * "The types `Floating', `Long_Floating', `Binary', `Long_Binary',
     `Decimal_ Element', and `COBOL_Character'; and the initialization
     of the variables `Ada_To_COBOL' and `COBOL_To_Ada', in
     `Interfaces.COBOL'.  See B.4(50)."

COBOL                     Ada
------------------------------------------------------------------- 
`Floating'                Float
`Long_Floating'           (Floating) Long_Float
`Binary'                  Integer
`Long_Binary'             Long_Long_Integer
`Decimal_Element'         Character
`COBOL_Character'         Character

For initialization, see the file `i-cobol.ads' in the distributed
library.

   * "Support for access to machine instructions.  See C.1(1)."

See documentation in file `s-maccod.ads' in the distributed library.

   * "Implementation-defined aspects of access to machine operations.
     See C.1(9)."

See documentation in file `s-maccod.ads' in the distributed library.

   * "Implementation-defined aspects of interrupts.  See C.3(2)."

Interrupts are mapped to signals or conditions as appropriate.  See
definition of unit `Ada.Interrupt_Names' in source file `a-intnam.ads'
for details on the interrupts supported on a particular target.

   * "Implementation-defined aspects of pre-elaboration.  See C.4(13)."

GNAT does not permit a partition to be restarted without reloading,
except under control of the debugger.

   * "The semantics of pragma `Discard_Names'.  See C.5(7)."

Pragma `Discard_Names' causes names of enumeration literals to be
suppressed.  In the presence of this pragma, the Image attribute
provides the image of the Pos of the literal, and Value accepts Pos
values.

   * "The result of the `Task_Identification.Image' attribute.  See
     C.7.1(7)."

The result of this attribute is a string that identifies the object or
component that denotes a given task. If a variable `Var' has a task
type, the image for this task will have the form `Var_`XXXXXXXX`',
where the suffix is the hexadecimal representation of the virtual
address of the corresponding task control block. If the variable is an
array of tasks, the image of each task will have the form of an indexed
component indicating the position of a given task in the array, e.g.,
`Group(5)_`XXXXXXX`'. If the task is a component of a record, the image
of the task will have the form of a selected component. These rules are
fully recursive, so that the image of a task that is a subcomponent of
a composite object corresponds to the expression that designates this
task.

If a task is created by an allocator, its image depends on the context.
If the allocator is part of an object declaration, the rules described
above are used to construct its image, and this image is not affected
by subsequent assignments. If the allocator appears within an
expression, the image includes only the name of the task type.

If the configuration pragma Discard_Names is present, or if the
restriction No_Implicit_Heap_Allocation is in effect,  the image
reduces to the numeric suffix, that is to say the hexadecimal
representation of the virtual address of the control block of the task.

   * "The value of `Current_Task' when in a protected entry or
     interrupt handler.  See C.7.1(17)."

Protected entries or interrupt handlers can be executed by any
convenient thread, so the value of `Current_Task' is undefined.

   * "The effect of calling `Current_Task' from an entry body or
     interrupt handler.  See C.7.1(19)."

The effect of calling `Current_Task' from an entry body or interrupt
handler is to return the identification of the task currently executing
the code.

   * "Implementation-defined aspects of `Task_Attributes'.  See
     C.7.2(19)."

There are no implementation-defined aspects of `Task_Attributes'.

   * "Values of all `Metrics'.  See D(2)."

The metrics information for GNAT depends on the performance of the
underlying operating system.  The sources of the run-time for tasking
implementation, together with the output from `-gnatG' can be used to
determine the exact sequence of operating systems calls made to
implement various tasking constructs.  Together with appropriate
information on the performance of the underlying operating system, on
the exact target in use, this information can be used to determine the
required metrics.

   * "The declarations of `Any_Priority' and `Priority'.  See D.1(11)."

See declarations in file `system.ads'.

   * "Implementation-defined execution resources.  See D.1(15)."

There are no implementation-defined execution resources.

   * "Whether, on a multiprocessor, a task that is waiting for access
     to a protected object keeps its processor busy.  See D.2.1(3)."

On a multi-processor, a task that is waiting for access to a protected
object does not keep its processor busy.

   * "The affect of implementation defined execution resources on task
     dispatching.  See D.2.1(9)."

Tasks map to threads in the threads package used by GNAT.  Where
possible and appropriate, these threads correspond to native threads of
the underlying operating system.

   * "Implementation-defined `policy_identifiers' allowed in a pragma
     `Task_Dispatching_Policy'.  See D.2.2(3)."

There are no implementation-defined policy-identifiers allowed in this
pragma.

   * "Implementation-defined aspects of priority inversion.  See
     D.2.2(16)."

Execution of a task cannot be preempted by the implementation processing
of delay expirations for lower priority tasks.

   * "Implementation-defined task dispatching.  See D.2.2(18)."

The policy is the same as that of the underlying threads implementation.

   * "Implementation-defined `policy_identifiers' allowed in a pragma
     `Locking_Policy'.  See D.3(4)."

The two implementation defined policies permitted in GNAT are
`Inheritance_Locking' and  `Conccurent_Readers_Locking'.  On targets
that support the `Inheritance_Locking' policy, locking is implemented
by inheritance, i.e., the task owning the lock operates at a priority
equal to the highest priority of any task currently requesting the
lock.  On targets that support the `Conccurent_Readers_Locking' policy,
locking is implemented with a read/write lock allowing multiple
propected object functions to enter concurrently.

   * "Default ceiling priorities.  See D.3(10)."

The ceiling priority of protected objects of the type
`System.Interrupt_Priority'Last' as described in the Ada Reference
Manual D.3(10),

   * "The ceiling of any protected object used internally by the
     implementation.  See D.3(16)."

The ceiling priority of internal protected objects is
`System.Priority'Last'.

   * "Implementation-defined queuing policies.  See D.4(1)."

There are no implementation-defined queuing policies.

   * "On a multiprocessor, any conditions that cause the completion of
     an aborted construct to be delayed later than what is specified
     for a single processor.  See D.6(3)."

The semantics for abort on a multi-processor is the same as on a single
processor, there are no further delays.

   * "Any operations that implicitly require heap storage allocation.
     See D.7(8)."

The only operation that implicitly requires heap storage allocation is
task creation.

   * "What happens when a task terminates in the presence of pragma
     `No_Task_Termination'. See D.7(15)."

Execution is erroneous in that case.

   * "Implementation-defined aspects of pragma `Restrictions'.  See
     D.7(20)."

There are no such implementation-defined aspects.

   * "Implementation-defined aspects of package `Real_Time'.  See
     D.8(17)."

There are no implementation defined aspects of package `Real_Time'.

   * "Implementation-defined aspects of `delay_statements'.  See
     D.9(8)."

Any difference greater than one microsecond will cause the task to be
delayed (see D.9(7)).

   * "The upper bound on the duration of interrupt blocking caused by
     the implementation.  See D.12(5)."

The upper bound is determined by the underlying operating system.  In
no cases is it more than 10 milliseconds.

   * "The means for creating and executing distributed programs.  See
     E(5)."

The GLADE package provides a utility GNATDIST for creating and executing
distributed programs.  See the GLADE reference manual for further
details.

   * "Any events that can result in a partition becoming inaccessible.
     See E.1(7)."

See the GLADE reference manual for full details on such events.

   * "The scheduling policies, treatment of priorities, and management
     of shared resources between partitions in certain cases.  See
     E.1(11)."

See the GLADE reference manual for full details on these aspects of
multi-partition execution.

   * "Events that cause the version of a compilation unit to change.
     See E.3(5)."

Editing the source file of a compilation unit, or the source files of
any units on which it is dependent in a significant way cause the
version to change.  No other actions cause the version number to
change.  All changes are significant except those which affect only
layout, capitalization or comments.

   * "Whether the execution of the remote subprogram is immediately
     aborted as a result of cancellation.  See E.4(13)."

See the GLADE reference manual for details on the effect of abort in a
distributed application.

   * "Implementation-defined aspects of the PCS.  See E.5(25)."

See the GLADE reference manual for a full description of all
implementation defined aspects of the PCS.

   * "Implementation-defined interfaces in the PCS.  See E.5(26)."

See the GLADE reference manual for a full description of all
implementation defined interfaces.

   * "The values of named numbers in the package `Decimal'.  See
     F.2(7)."

Named Number             Value
---------------------------------------- 
`Max_Scale'              +18
`Min_Scale'              -18
`Min_Delta'              1.0E-18
`Max_Delta'              1.0E+18
`Max_Decimal_Digits'     18

   * "The value of `Max_Picture_Length' in the package
     `Text_IO.Editing'.  See F.3.3(16)."

64

   * "The value of `Max_Picture_Length' in the package
     `Wide_Text_IO.Editing'.  See F.3.4(5)."

64

   * "The accuracy actually achieved by the complex elementary
     functions and by other complex arithmetic operations.  See G.1(1)."

Standard library functions are used for the complex arithmetic
operations.  Only fast math mode is currently supported.

   * "The sign of a zero result (or a component thereof) from any
     operator or function in `Numerics.Generic_Complex_Types', when
     `Real'Signed_Zeros' is True.  See G.1.1(53)."

The signs of zero values are as recommended by the relevant
implementation advice.

   * "The sign of a zero result (or a component thereof) from any
     operator or function in
     `Numerics.Generic_Complex_Elementary_Functions', when
     `Real'Signed_Zeros' is `True'.  See G.1.2(45)."

The signs of zero values are as recommended by the relevant
implementation advice.

   * "Whether the strict mode or the relaxed mode is the default.  See
     G.2(2)."

The strict mode is the default.  There is no separate relaxed mode.
GNAT provides a highly efficient implementation of strict mode.

   * "The result interval in certain cases of fixed-to-float
     conversion.  See G.2.1(10)."

For cases where the result interval is implementation dependent, the
accuracy is that provided by performing all operations in 64-bit IEEE
floating-point format.

   * "The result of a floating point arithmetic operation in overflow
     situations, when the `Machine_Overflows' attribute of the result
     type is `False'.  See G.2.1(13)."

Infinite and NaN values are produced as dictated by the IEEE
floating-point standard.  Note that on machines that are not fully
compliant with the IEEE floating-point standard, such as Alpha, the
`-mieee' compiler flag must be used for achieving IEEE conforming
behavior (although at the cost of a significant performance penalty),
so infinite and NaN values are properly generated.

   * "The result interval for division (or exponentiation by a negative
     exponent), when the floating point hardware implements division as
     multiplication by a reciprocal.  See G.2.1(16)."

Not relevant, division is IEEE exact.

   * "The definition of close result set, which determines the accuracy
     of certain fixed point multiplications and divisions.  See
     G.2.3(5)."

Operations in the close result set are performed using IEEE long format
floating-point arithmetic.  The input operands are converted to
floating-point, the operation is done in floating-point, and the result
is converted to the target type.

   * "Conditions on a `universal_real' operand of a fixed point
     multiplication or division for which the result shall be in the
     perfect result set.  See G.2.3(22)."

The result is only defined to be in the perfect result set if the result
can be computed by a single scaling operation involving a scale factor
representable in 64-bits.

   * "The result of a fixed point arithmetic operation in overflow
     situations, when the `Machine_Overflows' attribute of the result
     type is `False'.  See G.2.3(27)."

Not relevant, `Machine_Overflows' is `True' for fixed-point types.

   * "The result of an elementary function reference in overflow
     situations, when the `Machine_Overflows' attribute of the result
     type is `False'.  See G.2.4(4)."

IEEE infinite and Nan values are produced as appropriate.

   * "The value of the angle threshold, within which certain elementary
     functions, complex arithmetic operations, and complex elementary
     functions yield results conforming to a maximum relative error
     bound.  See G.2.4(10)."

Information on this subject is not yet available.

   * "The accuracy of certain elementary functions for parameters
     beyond the angle threshold.  See G.2.4(10)."

Information on this subject is not yet available.

   * "The result of a complex arithmetic operation or complex
     elementary function reference in overflow situations, when the
     `Machine_Overflows' attribute of the corresponding real type is
     `False'.  See G.2.6(5)."

IEEE infinite and Nan values are produced as appropriate.

   * "The accuracy of certain complex arithmetic operations and certain
     complex elementary functions for parameters (or components
     thereof) beyond the angle threshold.  See G.2.6(8)."

Information on those subjects is not yet available.

   * "Information regarding bounded errors and erroneous execution.
     See H.2(1)."

Information on this subject is not yet available.

   * "Implementation-defined aspects of pragma `Inspection_Point'.  See
     H.3.2(8)."

Pragma `Inspection_Point' ensures that the variable is live and can be
examined by the debugger at the inspection point.

   * "Implementation-defined aspects of pragma `Restrictions'.  See
     H.4(25)."

There are no implementation-defined aspects of pragma `Restrictions'.
The use of pragma `Restrictions [No_Exceptions]' has no effect on the
generated code.  Checks must suppressed by use of pragma `Suppress'.

   * "Any restrictions on pragma `Restrictions'.  See H.4(27)."

There are no restrictions on pragma `Restrictions'.


File: gnat_rm.info,  Node: Intrinsic Subprograms,  Next: Representation Clauses and Pragmas,  Prev: Implementation Defined Characteristics,  Up: Top

8 Intrinsic Subprograms
***********************

GNAT allows a user application program to write the declaration:

    pragma Import (Intrinsic, name);

providing that the name corresponds to one of the implemented intrinsic
subprograms in GNAT, and that the parameter profile of the referenced
subprogram meets the requirements.  This chapter describes the set of
implemented intrinsic subprograms, and the requirements on parameter
profiles.  Note that no body is supplied; as with other uses of pragma
Import, the body is supplied elsewhere (in this case by the compiler
itself).  Note that any use of this feature is potentially
non-portable, since the Ada standard does not require Ada compilers to
implement this feature.

* Menu:

* Intrinsic Operators::
* Compilation_Date::
* Compilation_Time::
* Enclosing_Entity::
* Exception_Information::
* Exception_Message::
* Exception_Name::
* File::
* Line::
* Shifts and Rotates::
* Source_Location::


File: gnat_rm.info,  Node: Intrinsic Operators,  Next: Compilation_Date,  Up: Intrinsic Subprograms

8.1 Intrinsic Operators
=======================

All the predefined numeric operators in package Standard in `pragma
Import (Intrinsic,..)'  declarations.  In the binary operator case, the
operands must have the same size.  The operand or operands must also be
appropriate for the operator.  For example, for addition, the operands
must both be floating-point or both be fixed-point, and the right
operand for `"**"' must have a root type of `Standard.Integer'Base'.
You can use an intrinsic operator declaration as in the following
example:

    type Int1 is new Integer;
    type Int2 is new Integer;

    function "+" (X1 : Int1; X2 : Int2) return Int1;
    function "+" (X1 : Int1; X2 : Int2) return Int2;
    pragma Import (Intrinsic, "+");

This declaration would permit 'mixed mode' arithmetic on items of the
differing types `Int1' and `Int2'.  It is also possible to specify such
operators for private types, if the full views are appropriate
arithmetic types.


File: gnat_rm.info,  Node: Compilation_Date,  Next: Compilation_Time,  Prev: Intrinsic Operators,  Up: Intrinsic Subprograms

8.2 Compilation_Date
====================

This intrinsic subprogram is used in the implementation of the library
package `GNAT.Source_Info'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Source_Info.Compilation_Date' to
obtain the date of the current compilation (in local time format MMM DD
YYYY).


File: gnat_rm.info,  Node: Compilation_Time,  Next: Enclosing_Entity,  Prev: Compilation_Date,  Up: Intrinsic Subprograms

8.3 Compilation_Time
====================

This intrinsic subprogram is used in the implementation of the library
package `GNAT.Source_Info'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Source_Info.Compilation_Time' to
obtain the time of the current compilation (in local time format
HH:MM:SS).


File: gnat_rm.info,  Node: Enclosing_Entity,  Next: Exception_Information,  Prev: Compilation_Time,  Up: Intrinsic Subprograms

8.4 Enclosing_Entity
====================

This intrinsic subprogram is used in the implementation of the library
package `GNAT.Source_Info'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Source_Info.Enclosing_Entity' to
obtain the name of the current subprogram, package, task, entry, or
protected subprogram.


File: gnat_rm.info,  Node: Exception_Information,  Next: Exception_Message,  Prev: Enclosing_Entity,  Up: Intrinsic Subprograms

8.5 Exception_Information
=========================

This intrinsic subprogram is used in the implementation of the library
package `GNAT.Current_Exception'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function
`GNAT.Current_Exception.Exception_Information' to obtain the exception
information associated with the current exception.


File: gnat_rm.info,  Node: Exception_Message,  Next: Exception_Name,  Prev: Exception_Information,  Up: Intrinsic Subprograms

8.6 Exception_Message
=====================

This intrinsic subprogram is used in the implementation of the library
package `GNAT.Current_Exception'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function
`GNAT.Current_Exception.Exception_Message' to obtain the message
associated with the current exception.


File: gnat_rm.info,  Node: Exception_Name,  Next: File,  Prev: Exception_Message,  Up: Intrinsic Subprograms

8.7 Exception_Name
==================

This intrinsic subprogram is used in the implementation of the library
package `GNAT.Current_Exception'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Current_Exception.Exception_Name'
to obtain the name of the current exception.


File: gnat_rm.info,  Node: File,  Next: Line,  Prev: Exception_Name,  Up: Intrinsic Subprograms

8.8 File
========

This intrinsic subprogram is used in the implementation of the library
package `GNAT.Source_Info'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Source_Info.File' to obtain the
name of the current file.


File: gnat_rm.info,  Node: Line,  Next: Shifts and Rotates,  Prev: File,  Up: Intrinsic Subprograms

8.9 Line
========

This intrinsic subprogram is used in the implementation of the library
package `GNAT.Source_Info'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Source_Info.Line' to obtain the
number of the current source line.


File: gnat_rm.info,  Node: Shifts and Rotates,  Next: Source_Location,  Prev: Line,  Up: Intrinsic Subprograms

8.10 Shifts and Rotates
=======================

In standard Ada, the shift and rotate functions are available only for
the predefined modular types in package `Interfaces'.  However, in GNAT
it is possible to define these functions for any integer type (signed
or modular), as in this example:

    function Shift_Left
      (Value  : T;
       Amount : Natural) return T;

The function name must be one of Shift_Left, Shift_Right,
Shift_Right_Arithmetic, Rotate_Left, or Rotate_Right. T must be an
integer type. T'Size must be 8, 16, 32 or 64 bits; if T is modular, the
modulus must be 2**8, 2**16, 2**32 or 2**64.  The result type must be
the same as the type of `Value'.  The shift amount must be Natural.
The formal parameter names can be anything.

A more convenient way of providing these shift operators is to use the
Provide_Shift_Operators pragma, which provides the function declarations
and corresponding pragma Import's for all five shift functions.


File: gnat_rm.info,  Node: Source_Location,  Prev: Shifts and Rotates,  Up: Intrinsic Subprograms

8.11 Source_Location
====================

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Source_Info'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Source_Info.Source_Location' to
obtain the current source file location.


File: gnat_rm.info,  Node: Representation Clauses and Pragmas,  Next: Standard Library Routines,  Prev: Intrinsic Subprograms,  Up: Top

9 Representation Clauses and Pragmas
************************************

This section describes the representation clauses accepted by GNAT, and
their effect on the representation of corresponding data objects.

GNAT fully implements Annex C (Systems Programming).  This means that
all the implementation advice sections in chapter 13 are fully
implemented.  However, these sections only require a minimal level of
support for representation clauses.  GNAT provides much more extensive
capabilities, and this section describes the additional capabilities
provided.

* Menu:

* Alignment Clauses::
* Size Clauses::
* Storage_Size Clauses::
* Size of Variant Record Objects::
* Biased Representation::
* Value_Size and Object_Size Clauses::
* Component_Size Clauses::
* Bit_Order Clauses::
* Effect of Bit_Order on Byte Ordering::
* Pragma Pack for Arrays::
* Pragma Pack for Records::
* Record Representation Clauses::
* Handling of Records with Holes::
* Enumeration Clauses::
* Address Clauses::
* Use of Address Clauses for Memory-Mapped I/O::
* Effect of Convention on Representation::
* Conventions and Anonymous Access Types::
* Determining the Representations chosen by GNAT::


File: gnat_rm.info,  Node: Alignment Clauses,  Next: Size Clauses,  Up: Representation Clauses and Pragmas

9.1 Alignment Clauses
=====================

GNAT requires that all alignment clauses specify a power of 2, and all
default alignments are always a power of 2.  The default alignment
values are as follows:

   * `Primitive Types'.

     For primitive types, the alignment is the minimum of the actual
     size of objects of the type divided by `Storage_Unit', and the
     maximum alignment supported by the target.  (This maximum
     alignment is given by the GNAT-specific attribute
     `Standard'Maximum_Alignment'; see *Note Attribute
     Maximum_Alignment: 13e.)

     For example, for type `Long_Float', the object size is 8 bytes,
     and the default alignment will be 8 on any target that supports
     alignments this large, but on some targets, the maximum alignment
     may be smaller than 8, in which case objects of type `Long_Float'
     will be maximally aligned.

   * `Arrays'.

     For arrays, the alignment is equal to the alignment of the
     component type for the normal case where no packing or component
     size is given.  If the array is packed, and the packing is
     effective (see separate section on packed arrays), then the
     alignment will be one for long packed arrays, or arrays whose
     length is not known at compile time.  For short packed arrays,
     which are handled internally as modular types, the alignment will
     be as described for primitive types, e.g., a packed array of length
     31 bits will have an object size of four bytes, and an alignment
     of 4.

   * `Records'.

     For the normal non-packed case, the alignment of a record is equal
     to the maximum alignment of any of its components.  For tagged
     records, this includes the implicit access type used for the tag.
     If a pragma `Pack' is used and all components are packable (see
     separate section on pragma `Pack'), then the resulting alignment
     is 1, unless the layout of the record makes it profitable to
     increase it.

     A special case is when:

        * the size of the record is given explicitly, or a full record
          representation clause is given, and

        * the size of the record is 2, 4, or 8 bytes.

     In this case, an alignment is chosen to match the size of the
     record. For example, if we have:

         type Small is record
            A, B : Character;
         end record;
         for Small'Size use 16;

     then the default alignment of the record type `Small' is 2, not 1.
     This leads to more efficient code when the record is treated as a
     unit, and also allows the type to specified as `Atomic' on
     architectures requiring strict alignment.

An alignment clause may specify a larger alignment than the default
value up to some maximum value dependent on the target (obtainable by
using the attribute reference `Standard'Maximum_Alignment'). It may
also specify a smaller alignment than the default value for
enumeration, integer and fixed point types, as well as for record
types, for example

    type V is record
       A : Integer;
    end record;

    for V'alignment use 1;

The default alignment for the type `V' is 4, as a result of the Integer
field in the record, but it is permissible, as shown, to override the
default alignment of the record with a smaller value.

Note that according to the Ada standard, an alignment clause applies
only to the first named subtype. If additional subtypes are declared,
then the compiler is allowed to choose any alignment it likes, and
there is no way to control this choice. Consider:

    type R is range 1 .. 10_000;
    for R'Alignment use 1;
    subtype RS is R range 1 .. 1000;

The alignment clause specifies an alignment of 1 for the first named
subtype `R' but this does not necessarily apply to `RS'. When writing
portable Ada code, you should avoid writing code that explicitly or
implicitly relies on the alignment of such subtypes.

For the GNAT compiler, if an explicit alignment clause is given, this
value is also used for any subsequent subtypes. So for GNAT, in the
above example, you can count on the alignment of `RS' being 1. But this
assumption is non-portable, and other compilers may choose different
alignments for the subtype `RS'.


File: gnat_rm.info,  Node: Size Clauses,  Next: Storage_Size Clauses,  Prev: Alignment Clauses,  Up: Representation Clauses and Pragmas

9.2 Size Clauses
================

The default size for a type `T' is obtainable through the
language-defined attribute `T'Size' and also through the equivalent
GNAT-defined attribute `T'Value_Size'.  For objects of type `T', GNAT
will generally increase the type size so that the object size
(obtainable through the GNAT-defined attribute `T'Object_Size') is a
multiple of `T'Alignment * Storage_Unit'.

For example:

    type Smallint is range 1 .. 6;

    type Rec is record
       Y1 : integer;
       Y2 : boolean;
    end record;

In this example, `Smallint'Size' = `Smallint'Value_Size' = 3, as
specified by the RM rules, but objects of this type will have a size of
8 (`Smallint'Object_Size' = 8), since objects by default occupy an
integral number of storage units.  On some targets, notably older
versions of the Digital Alpha, the size of stand alone objects of this
type may be 32, reflecting the inability of the hardware to do byte
load/stores.

Similarly, the size of type `Rec' is 40 bits (`Rec'Size' =
`Rec'Value_Size' = 40), but the alignment is 4, so objects of this type
will have their size increased to 64 bits so that it is a multiple of
the alignment (in bits).  This decision is in accordance with the
specific Implementation Advice in RM 13.3(43):

     "A `Size' clause should be supported for an object if the specified
     `Size' is at least as large as its subtype's `Size', and
     corresponds to a size in storage elements that is a multiple of
     the object's `Alignment' (if the `Alignment' is nonzero)."

An explicit size clause may be used to override the default size by
increasing it.  For example, if we have:

    type My_Boolean is new Boolean;
    for My_Boolean'Size use 32;

then values of this type will always be 32 bits long.  In the case of
discrete types, the size can be increased up to 64 bits, with the effect
that the entire specified field is used to hold the value, sign- or
zero-extended as appropriate.  If more than 64 bits is specified, then
padding space is allocated after the value, and a warning is issued that
there are unused bits.

Similarly the size of records and arrays may be increased, and the
effect is to add padding bits after the value.  This also causes a
warning message to be generated.

The largest Size value permitted in GNAT is 2**31-1.  Since this is a
Size in bits, this corresponds to an object of size 256 megabytes (minus
one).  This limitation is true on all targets.  The reason for this
limitation is that it improves the quality of the code in many cases if
it is known that a Size value can be accommodated in an object of type
Integer.


File: gnat_rm.info,  Node: Storage_Size Clauses,  Next: Size of Variant Record Objects,  Prev: Size Clauses,  Up: Representation Clauses and Pragmas

9.3 Storage_Size Clauses
========================

For tasks, the `Storage_Size' clause specifies the amount of space to
be allocated for the task stack.  This cannot be extended, and if the
stack is exhausted, then `Storage_Error' will be raised (if stack
checking is enabled).  Use a `Storage_Size' attribute definition clause,
or a `Storage_Size' pragma in the task definition to set the
appropriate required size.  A useful technique is to include in every
task definition a pragma of the form:

    pragma Storage_Size (Default_Stack_Size);

Then `Default_Stack_Size' can be defined in a global package, and
modified as required. Any tasks requiring stack sizes different from the
default can have an appropriate alternative reference in the pragma.

You can also use the `-d' binder switch to modify the default stack
size.

For access types, the `Storage_Size' clause specifies the maximum space
available for allocation of objects of the type.  If this space is
exceeded then `Storage_Error' will be raised by an allocation attempt.
In the case where the access type is declared local to a subprogram, the
use of a `Storage_Size' clause triggers automatic use of a special
predefined storage pool (`System.Pool_Size') that ensures that all
space for the pool is automatically reclaimed on exit from the scope in
which the type is declared.

A special case recognized by the compiler is the specification of a
`Storage_Size' of zero for an access type.  This means that no items
can be allocated from the pool, and this is recognized at compile time,
and all the overhead normally associated with maintaining a fixed size
storage pool is eliminated.  Consider the following example:

    procedure p is
       type R is array (Natural) of Character;
       type P is access all R;
       for P'Storage_Size use 0;
       --  Above access type intended only for interfacing purposes

       y : P;

       procedure g (m : P);
       pragma Import (C, g);

       --  ...

    begin
       --  ...
       y := new R;
    end;

As indicated in this example, these dummy storage pools are often
useful in connection with interfacing where no object will ever be
allocated.  If you compile the above example, you get the warning:

    p.adb:16:09: warning: allocation from empty storage pool
    p.adb:16:09: warning: Storage_Error will be raised at run time

Of course in practice, there will not be any explicit allocators in the
case of such an access declaration.


File: gnat_rm.info,  Node: Size of Variant Record Objects,  Next: Biased Representation,  Prev: Storage_Size Clauses,  Up: Representation Clauses and Pragmas

9.4 Size of Variant Record Objects
==================================

In the case of variant record objects, there is a question whether Size
gives information about a particular variant, or the maximum size
required for any variant.  Consider the following program

    with Text_IO; use Text_IO;
    procedure q is
       type R1 (A : Boolean := False) is record
         case A is
           when True  => X : Character;
           when False => null;
         end case;
       end record;

       V1 : R1 (False);
       V2 : R1;

    begin
       Put_Line (Integer'Image (V1'Size));
       Put_Line (Integer'Image (V2'Size));
    end q;

Here we are dealing with a variant record, where the True variant
requires 16 bits, and the False variant requires 8 bits.  In the above
example, both V1 and V2 contain the False variant, which is only 8 bits
long.  However, the result of running the program is:

    8
    16

The reason for the difference here is that the discriminant value of V1
is fixed, and will always be False.  It is not possible to assign a
True variant value to V1, therefore 8 bits is sufficient.  On the other
hand, in the case of V2, the initial discriminant value is False (from
the default), but it is possible to assign a True variant value to V2,
therefore 16 bits must be allocated for V2 in the general case, even
fewer bits may be needed at any particular point during the program
execution.

As can be seen from the output of this program, the `'Size' attribute
applied to such an object in GNAT gives the actual allocated size of
the variable, which is the largest size of any of the variants.  The
Ada Reference Manual is not completely clear on what choice should be
made here, but the GNAT behavior seems most consistent with the
language in the RM.

In some cases, it may be desirable to obtain the size of the current
variant, rather than the size of the largest variant.  This can be
achieved in GNAT by making use of the fact that in the case of a
subprogram parameter, GNAT does indeed return the size of the current
variant (because a subprogram has no way of knowing how much space is
actually allocated for the actual).

Consider the following modified version of the above program:

    with Text_IO; use Text_IO;
    procedure q is
       type R1 (A : Boolean := False) is record
         case A is
           when True  => X : Character;
           when False => null;
         end case;
       end record;

       V2 : R1;

       function Size (V : R1) return Integer is
       begin
          return V'Size;
       end Size;

    begin
       Put_Line (Integer'Image (V2'Size));
       Put_Line (Integer'IMage (Size (V2)));
       V2 := (True, 'x');
       Put_Line (Integer'Image (V2'Size));
       Put_Line (Integer'IMage (Size (V2)));
    end q;

The output from this program is

    16
    8
    16
    16

Here we see that while the `'Size' attribute always returns the maximum
size, regardless of the current variant value, the `Size' function does
indeed return the size of the current variant value.


File: gnat_rm.info,  Node: Biased Representation,  Next: Value_Size and Object_Size Clauses,  Prev: Size of Variant Record Objects,  Up: Representation Clauses and Pragmas

9.5 Biased Representation
=========================

In the case of scalars with a range starting at other than zero, it is
possible in some cases to specify a size smaller than the default
minimum value, and in such cases, GNAT uses an unsigned biased
representation, in which zero is used to represent the lower bound, and
successive values represent successive values of the type.

For example, suppose we have the declaration:

    type Small is range -7 .. -4;
    for Small'Size use 2;

Although the default size of type `Small' is 4, the `Size' clause is
accepted by GNAT and results in the following representation scheme:

    -7 is represented as 2#00#
    -6 is represented as 2#01#
    -5 is represented as 2#10#
    -4 is represented as 2#11#

Biased representation is only used if the specified `Size' clause
cannot be accepted in any other manner.  These reduced sizes that force
biased representation can be used for all discrete types except for
enumeration types for which a representation clause is given.


File: gnat_rm.info,  Node: Value_Size and Object_Size Clauses,  Next: Component_Size Clauses,  Prev: Biased Representation,  Up: Representation Clauses and Pragmas

9.6 Value_Size and Object_Size Clauses
======================================

In Ada 95 and Ada 2005, `T'Size' for a type `T' is the minimum number
of bits required to hold values of type `T'.  Although this
interpretation was allowed in Ada 83, it was not required, and this
requirement in practice can cause some significant difficulties.  For
example, in most Ada 83 compilers, `Natural'Size' was 32.  However, in
Ada 95 and Ada 2005, `Natural'Size' is typically 31.  This means that
code may change in behavior when moving from Ada 83 to Ada 95 or Ada
2005.  For example, consider:

    type Rec is record;
       A : Natural;
       B : Natural;
    end record;

    for Rec use record
       at 0  range 0 .. Natural'Size - 1;
       at 0  range Natural'Size .. 2 * Natural'Size - 1;
    end record;

In the above code, since the typical size of `Natural' objects is 32
bits and `Natural'Size' is 31, the above code can cause unexpected
inefficient packing in Ada 95 and Ada 2005, and in general there are
cases where the fact that the object size can exceed the size of the
type causes surprises.

To help get around this problem GNAT provides two implementation
defined attributes, `Value_Size' and `Object_Size'.  When applied to a
type, these attributes yield the size of the type (corresponding to the
RM defined size attribute), and the size of objects of the type
respectively.

The `Object_Size' is used for determining the default size of objects
and components.  This size value can be referred to using the
`Object_Size' attribute.  The phrase 'is used' here means that it is
the basis of the determination of the size.  The backend is free to pad
this up if necessary for efficiency, e.g., an 8-bit stand-alone
character might be stored in 32 bits on a machine with no efficient
byte access instructions such as the Alpha.

The default rules for the value of `Object_Size' for discrete types are
as follows:

   * The `Object_Size' for base subtypes reflect the natural hardware
     size in bits (run the compiler with `-gnatS' to find those values
     for numeric types). Enumeration types and fixed-point base
     subtypes have 8, 16, 32 or 64 bits for this size, depending on the
     range of values to be stored.

   * The `Object_Size' of a subtype is the same as the `Object_Size' of
     the type from which it is obtained.

   * The `Object_Size' of a derived base type is copied from the parent
     base type, and the `Object_Size' of a derived first subtype is
     copied from the parent first subtype.

The `Value_Size' attribute is the (minimum) number of bits required to
store a value of the type.  This value is used to determine how tightly
to pack records or arrays with components of this type, and also affects
the semantics of unchecked conversion (unchecked conversions where the
`Value_Size' values differ generate a warning, and are potentially
target dependent).

The default rules for the value of `Value_Size' are as follows:

   * The `Value_Size' for a base subtype is the minimum number of bits
     required to store all values of the type (including the sign bit
     only if negative values are possible).

   * If a subtype statically matches the first subtype of a given type,
     then it has by default the same `Value_Size' as the first subtype.
     This is a consequence of RM 13.1(14): "if two subtypes statically
     match, then their subtype-specific aspects are the same".)

   * All other subtypes have a `Value_Size' corresponding to the minimum
     number of bits required to store all values of the subtype.  For
     dynamic bounds, it is assumed that the value can range down or up
     to the corresponding bound of the ancestor

The RM defined attribute `Size' corresponds to the `Value_Size'
attribute.

The `Size' attribute may be defined for a first-named subtype.  This
sets the `Value_Size' of the first-named subtype to the given value,
and the `Object_Size' of this first-named subtype to the given value
padded up to an appropriate boundary.  It is a consequence of the
default rules above that this `Object_Size' will apply to all further
subtypes.  On the other hand, `Value_Size' is affected only for the
first subtype, any dynamic subtypes obtained from it directly, and any
statically matching subtypes.  The `Value_Size' of any other static
subtypes is not affected.

`Value_Size' and `Object_Size' may be explicitly set for any subtype
using an attribute definition clause.  Note that the use of these
attributes can cause the RM 13.1(14) rule to be violated.  If two
access types reference aliased objects whose subtypes have differing
`Object_Size' values as a result of explicit attribute definition
clauses, then it is illegal to convert from one access subtype to the
other. For a more complete description of this additional legality
rule, see the description of the `Object_Size' attribute.

At the implementation level, Esize stores the Object_Size and the
RM_Size field stores the `Value_Size' (and hence the value of the
`Size' attribute, which, as noted above, is equivalent to `Value_Size').

To get a feel for the difference, consider the following examples (note
that in each case the base is `Short_Short_Integer' with a size of 8):

Type or subtype declaration                       Object_Size       Value_Size
-------------------------------------------------------------------------------------- 
`type x1 is range 0 .. 5;'                        8                 3
`type x2 is range 0 .. 5;' `for x2'size use 12;'  16                12
`subtype x3 is x2 range 0 .. 3;'                  16                2
`subtype x4 is x2'base range 0 .. 10;'            8                 4
`subtype x5 is x2 range 0 .. dynamic;'            16                3*
`subtype x6 is x2'base range 0 .. dynamic;'       8                 3*

Note: the entries marked '3*' are not actually specified by the Ada
Reference Manual, but it seems in the spirit of the RM rules to allocate
the minimum number of bits (here 3, given the range for `x2') known to
be large enough to hold the given range of values.

So far, so good, but GNAT has to obey the RM rules, so the question is
under what conditions must the RM `Size' be used.  The following is a
list of the occasions on which the RM `Size' must be used:

   * Component size for packed arrays or records

   * Value of the attribute `Size' for a type

   * Warning about sizes not matching for unchecked conversion

For record types, the `Object_Size' is always a multiple of the
alignment of the type (this is true for all types). In some cases the
`Value_Size' can be smaller. Consider:

    type R is record
      X : Integer;
      Y : Character;
    end record;

On a typical 32-bit architecture, the X component will be four bytes,
and require four-byte alignment, and the Y component will be one byte.
In this case `R'Value_Size' will be 40 (bits) since this is the minimum
size required to store a value of this type, and for example, it is
permissible to have a component of type R in an outer array whose
component size is specified to be 48 bits. However, `R'Object_Size'
will be 64 (bits), since it must be rounded up so that this value is a
multiple of the alignment (4 bytes = 32 bits).

For all other types, the `Object_Size' and Value_Size are the same (and
equivalent to the RM attribute `Size').  Only `Size' may be specified
for such types.

Note that `Value_Size' can be used to force biased representation for a
particular subtype. Consider this example:

    type R is (A, B, C, D, E, F);
    subtype RAB is R range A .. B;
    subtype REF is R range E .. F;

By default, `RAB' has a size of 1 (sufficient to accommodate the
representation of `A' and `B', 0 and 1), and `REF' has a size of 3
(sufficient to accommodate the representation of `E' and `F', 4 and 5).
But if we add the following `Value_Size' attribute definition clause:

    for REF'Value_Size use 1;

then biased representation is forced for `REF', and 0 will represent
`E' and 1 will represent `F'.  A warning is issued when a `Value_Size'
attribute definition clause forces biased representation. This warning
can be turned off using `-gnatw.B'.


File: gnat_rm.info,  Node: Component_Size Clauses,  Next: Bit_Order Clauses,  Prev: Value_Size and Object_Size Clauses,  Up: Representation Clauses and Pragmas

9.7 Component_Size Clauses
==========================

Normally, the value specified in a component size clause must be
consistent with the subtype of the array component with regard to size
and alignment.  In other words, the value specified must be at least
equal to the size of this subtype, and must be a multiple of the
alignment value.

In addition, component size clauses are allowed which cause the array
to be packed, by specifying a smaller value.  A first case is for
component size values in the range 1 through 63.  The value specified
must not be smaller than the Size of the subtype.  GNAT will accurately
honor all packing requests in this range.  For example, if we have:

    type r is array (1 .. 8) of Natural;
    for r'Component_Size use 31;

then the resulting array has a length of 31 bytes (248 bits = 8 * 31).
Of course access to the components of such an array is considerably
less efficient than if the natural component size of 32 is used.  A
second case is when the subtype of the component is a record type
padded because of its default alignment.  For example, if we have:

    type r is record
      i : Integer;
      j : Integer;
      b : Boolean;
    end record;

    type a is array (1 .. 8) of r;
    for a'Component_Size use 72;

then the resulting array has a length of 72 bytes, instead of 96 bytes
if the alignment of the record (4) was obeyed.

Note that there is no point in giving both a component size clause and
a pragma Pack for the same array type. if such duplicate clauses are
given, the pragma Pack will be ignored.


File: gnat_rm.info,  Node: Bit_Order Clauses,  Next: Effect of Bit_Order on Byte Ordering,  Prev: Component_Size Clauses,  Up: Representation Clauses and Pragmas

9.8 Bit_Order Clauses
=====================

For record subtypes, GNAT permits the specification of the `Bit_Order'
attribute.  The specification may either correspond to the default bit
order for the target, in which case the specification has no effect and
places no additional restrictions, or it may be for the non-standard
setting (that is the opposite of the default).

In the case where the non-standard value is specified, the effect is to
renumber bits within each byte, but the ordering of bytes is not
affected.  There are certain restrictions placed on component clauses
as follows:

   * Components fitting within a single storage unit.

     These are unrestricted, and the effect is merely to renumber bits.
     For example if we are on a little-endian machine with
     `Low_Order_First' being the default, then the following two
     declarations have exactly the same effect:

         type R1 is record
            A : Boolean;
            B : Integer range 1 .. 120;
         end record;

         for R1 use record
            A at 0 range 0 .. 0;
            B at 0 range 1 .. 7;
         end record;

         type R2 is record
            A : Boolean;
            B : Integer range 1 .. 120;
         end record;

         for R2'Bit_Order use High_Order_First;

         for R2 use record
            A at 0 range 7 .. 7;
            B at 0 range 0 .. 6;
         end record;

     The useful application here is to write the second declaration
     with the `Bit_Order' attribute definition clause, and know that it
     will be treated the same, regardless of whether the target is
     little-endian or big-endian.

   * Components occupying an integral number of bytes.

     These are components that exactly fit in two or more bytes.  Such
     component declarations are allowed, but have no effect, since it
     is important to realize that the `Bit_Order' specification does
     not affect the ordering of bytes.  In particular, the following
     attempt at getting an endian-independent integer does not work:

         type R2 is record
            A : Integer;
         end record;

         for R2'Bit_Order use High_Order_First;

         for R2 use record
            A at 0 range 0 .. 31;
         end record;

     This declaration will result in a little-endian integer on a
     little-endian machine, and a big-endian integer on a big-endian
     machine.  If byte flipping is required for interoperability
     between big- and little-endian machines, this must be explicitly
     programmed.  This capability is not provided by `Bit_Order'.

   * Components that are positioned across byte boundaries

     but do not occupy an integral number of bytes.  Given that bytes
     are not reordered, such fields would occupy a non-contiguous
     sequence of bits in memory, requiring non-trivial code to
     reassemble.  They are for this reason not permitted, and any
     component clause specifying such a layout will be flagged as
     illegal by GNAT.

Since the misconception that Bit_Order automatically deals with all
endian-related incompatibilities is a common one, the specification of
a component field that is an integral number of bytes will always
generate a warning.  This warning may be suppressed using `pragma
Warnings (Off)' if desired.  The following section contains additional
details regarding the issue of byte ordering.


File: gnat_rm.info,  Node: Effect of Bit_Order on Byte Ordering,  Next: Pragma Pack for Arrays,  Prev: Bit_Order Clauses,  Up: Representation Clauses and Pragmas

9.9 Effect of Bit_Order on Byte Ordering
========================================

In this section we will review the effect of the `Bit_Order' attribute
definition clause on byte ordering.  Briefly, it has no effect at all,
but a detailed example will be helpful.  Before giving this example,
let us review the precise definition of the effect of defining
`Bit_Order'.  The effect of a non-standard bit order is described in
section 15.5.3 of the Ada Reference Manual:

     "2   A bit ordering is a method of interpreting the meaning of the
     storage place attributes."

To understand the precise definition of storage place attributes in
this context, we visit section 13.5.1 of the manual:

     "13   A record_representation_clause (without the mod_clause)
     specifies the layout.  The storage place attributes (see 13.5.2)
     are taken from the values of the position, first_bit, and last_bit
     expressions after normalizing those values so that first_bit is
     less than Storage_Unit."

The critical point here is that storage places are taken from the
values after normalization, not before.  So the `Bit_Order'
interpretation applies to normalized values.  The interpretation is
described in the later part of the 15.5.3 paragraph:

     "2   A bit ordering is a method of interpreting the meaning of the
     storage place attributes.  High_Order_First (known in the
     vernacular as 'big endian') means that the first bit of a storage
     element (bit 0) is the most significant bit (interpreting the
     sequence of bits that represent a component as an unsigned integer
     value).  Low_Order_First (known in the vernacular as 'little
     endian') means the opposite: the first bit is the least
     significant."

Note that the numbering is with respect to the bits of a storage unit.
In other words, the specification affects only the numbering of bits
within a single storage unit.

We can make the effect clearer by giving an example.

Suppose that we have an external device which presents two bytes, the
first byte presented, which is the first (low addressed byte) of the
two byte record is called Master, and the second byte is called Slave.

The left most (most significant bit is called Control for each byte, and
the remaining 7 bits are called V1, V2, ... V7, where V7 is the
rightmost (least significant) bit.

On a big-endian machine, we can write the following representation
clause

    type Data is record
       Master_Control : Bit;
       Master_V1      : Bit;
       Master_V2      : Bit;
       Master_V3      : Bit;
       Master_V4      : Bit;
       Master_V5      : Bit;
       Master_V6      : Bit;
       Master_V7      : Bit;
       Slave_Control  : Bit;
       Slave_V1       : Bit;
       Slave_V2       : Bit;
       Slave_V3       : Bit;
       Slave_V4       : Bit;
       Slave_V5       : Bit;
       Slave_V6       : Bit;
       Slave_V7       : Bit;
    end record;

    for Data use record
       Master_Control at 0 range 0 .. 0;
       Master_V1      at 0 range 1 .. 1;
       Master_V2      at 0 range 2 .. 2;
       Master_V3      at 0 range 3 .. 3;
       Master_V4      at 0 range 4 .. 4;
       Master_V5      at 0 range 5 .. 5;
       Master_V6      at 0 range 6 .. 6;
       Master_V7      at 0 range 7 .. 7;
       Slave_Control  at 1 range 0 .. 0;
       Slave_V1       at 1 range 1 .. 1;
       Slave_V2       at 1 range 2 .. 2;
       Slave_V3       at 1 range 3 .. 3;
       Slave_V4       at 1 range 4 .. 4;
       Slave_V5       at 1 range 5 .. 5;
       Slave_V6       at 1 range 6 .. 6;
       Slave_V7       at 1 range 7 .. 7;
    end record;

Now if we move this to a little endian machine, then the bit ordering
within the byte is backwards, so we have to rewrite the record rep
clause as:

    for Data use record
       Master_Control at 0 range 7 .. 7;
       Master_V1      at 0 range 6 .. 6;
       Master_V2      at 0 range 5 .. 5;
       Master_V3      at 0 range 4 .. 4;
       Master_V4      at 0 range 3 .. 3;
       Master_V5      at 0 range 2 .. 2;
       Master_V6      at 0 range 1 .. 1;
       Master_V7      at 0 range 0 .. 0;
       Slave_Control  at 1 range 7 .. 7;
       Slave_V1       at 1 range 6 .. 6;
       Slave_V2       at 1 range 5 .. 5;
       Slave_V3       at 1 range 4 .. 4;
       Slave_V4       at 1 range 3 .. 3;
       Slave_V5       at 1 range 2 .. 2;
       Slave_V6       at 1 range 1 .. 1;
       Slave_V7       at 1 range 0 .. 0;
    end record;

It is a nuisance to have to rewrite the clause, especially if the code
has to be maintained on both machines.  However, this is a case that we
can handle with the `Bit_Order' attribute if it is implemented.  Note
that the implementation is not required on byte addressed machines, but
it is indeed implemented in GNAT.  This means that we can simply use the
first record clause, together with the declaration

    for Data'Bit_Order use High_Order_First;

and the effect is what is desired, namely the layout is exactly the
same, independent of whether the code is compiled on a big-endian or
little-endian machine.

The important point to understand is that byte ordering is not affected.
A `Bit_Order' attribute definition never affects which byte a field
ends up in, only where it ends up in that byte.  To make this clear,
let us rewrite the record rep clause of the previous example as:

    for Data'Bit_Order use High_Order_First;
    for Data use record
       Master_Control at 0 range  0 .. 0;
       Master_V1      at 0 range  1 .. 1;
       Master_V2      at 0 range  2 .. 2;
       Master_V3      at 0 range  3 .. 3;
       Master_V4      at 0 range  4 .. 4;
       Master_V5      at 0 range  5 .. 5;
       Master_V6      at 0 range  6 .. 6;
       Master_V7      at 0 range  7 .. 7;
       Slave_Control  at 0 range  8 .. 8;
       Slave_V1       at 0 range  9 .. 9;
       Slave_V2       at 0 range 10 .. 10;
       Slave_V3       at 0 range 11 .. 11;
       Slave_V4       at 0 range 12 .. 12;
       Slave_V5       at 0 range 13 .. 13;
       Slave_V6       at 0 range 14 .. 14;
       Slave_V7       at 0 range 15 .. 15;
    end record;

This is exactly equivalent to saying (a repeat of the first example):

    for Data'Bit_Order use High_Order_First;
    for Data use record
       Master_Control at 0 range 0 .. 0;
       Master_V1      at 0 range 1 .. 1;
       Master_V2      at 0 range 2 .. 2;
       Master_V3      at 0 range 3 .. 3;
       Master_V4      at 0 range 4 .. 4;
       Master_V5      at 0 range 5 .. 5;
       Master_V6      at 0 range 6 .. 6;
       Master_V7      at 0 range 7 .. 7;
       Slave_Control  at 1 range 0 .. 0;
       Slave_V1       at 1 range 1 .. 1;
       Slave_V2       at 1 range 2 .. 2;
       Slave_V3       at 1 range 3 .. 3;
       Slave_V4       at 1 range 4 .. 4;
       Slave_V5       at 1 range 5 .. 5;
       Slave_V6       at 1 range 6 .. 6;
       Slave_V7       at 1 range 7 .. 7;
    end record;

Why are they equivalent? Well take a specific field, the `Slave_V2'
field.  The storage place attributes are obtained by normalizing the
values given so that the `First_Bit' value is less than 8.  After
normalizing the values (0,10,10) we get (1,2,2) which is exactly what
we specified in the other case.

Now one might expect that the `Bit_Order' attribute might affect bit
numbering within the entire record component (two bytes in this case,
thus affecting which byte fields end up in), but that is not the way
this feature is defined, it only affects numbering of bits, not which
byte they end up in.

Consequently it never makes sense to specify a starting bit number
greater than 7 (for a byte addressable field) if an attribute
definition for `Bit_Order' has been given, and indeed it may be
actively confusing to specify such a value, so the compiler generates a
warning for such usage.

If you do need to control byte ordering then appropriate conditional
values must be used.  If in our example, the slave byte came first on
some machines we might write:

    Master_Byte_First constant Boolean := ...;

    Master_Byte : constant Natural :=
                    1 - Boolean'Pos (Master_Byte_First);
    Slave_Byte  : constant Natural :=
                    Boolean'Pos (Master_Byte_First);

    for Data'Bit_Order use High_Order_First;
    for Data use record
       Master_Control at Master_Byte range 0 .. 0;
       Master_V1      at Master_Byte range 1 .. 1;
       Master_V2      at Master_Byte range 2 .. 2;
       Master_V3      at Master_Byte range 3 .. 3;
       Master_V4      at Master_Byte range 4 .. 4;
       Master_V5      at Master_Byte range 5 .. 5;
       Master_V6      at Master_Byte range 6 .. 6;
       Master_V7      at Master_Byte range 7 .. 7;
       Slave_Control  at Slave_Byte  range 0 .. 0;
       Slave_V1       at Slave_Byte  range 1 .. 1;
       Slave_V2       at Slave_Byte  range 2 .. 2;
       Slave_V3       at Slave_Byte  range 3 .. 3;
       Slave_V4       at Slave_Byte  range 4 .. 4;
       Slave_V5       at Slave_Byte  range 5 .. 5;
       Slave_V6       at Slave_Byte  range 6 .. 6;
       Slave_V7       at Slave_Byte  range 7 .. 7;
    end record;

Now to switch between machines, all that is necessary is to set the
boolean constant `Master_Byte_First' in an appropriate manner.


File: gnat_rm.info,  Node: Pragma Pack for Arrays,  Next: Pragma Pack for Records,  Prev: Effect of Bit_Order on Byte Ordering,  Up: Representation Clauses and Pragmas

9.10 Pragma Pack for Arrays
===========================

Pragma `Pack' applied to an array has no effect unless the component
type is packable.  For a component type to be packable, it must be one
of the following cases:

   * Any scalar type

   * Any type whose size is specified with a size clause

   * Any packed array type with a static size

   * Any record type padded because of its default alignment

For all these cases, if the component subtype size is in the range 1
through 63, then the effect of the pragma `Pack' is exactly as though a
component size were specified giving the component subtype size.  For
example if we have:

    type r is range 0 .. 17;

    type ar is array (1 .. 8) of r;
    pragma Pack (ar);

Then the component size of `ar' will be set to 5 (i.e., to `r'size',
and the size of the array `ar' will be exactly 40 bits.

Note that in some cases this rather fierce approach to packing can
produce unexpected effects.  For example, in Ada 95 and Ada 2005,
subtype `Natural' typically has a size of 31, meaning that if you pack
an array of `Natural', you get 31-bit close packing, which saves a few
bits, but results in far less efficient access.  Since many other Ada
compilers will ignore such a packing request, GNAT will generate a
warning on some uses of pragma `Pack' that it guesses might not be what
is intended.  You can easily remove this warning by using an explicit
`Component_Size' setting instead, which never generates a warning,
since the intention of the programmer is clear in this case.

GNAT treats packed arrays in one of two ways.  If the size of the array
is known at compile time and is less than 64 bits, then internally the
array is represented as a single modular type, of exactly the
appropriate number of bits.  If the length is greater than 63 bits, or
is not known at compile time, then the packed array is represented as
an array of bytes, and the length is always a multiple of 8 bits.

Note that to represent a packed array as a modular type, the alignment
must be suitable for the modular type involved. For example, on typical
machines a 32-bit packed array will be represented by a 32-bit modular
integer with an alignment of four bytes. If you explicitly override the
default alignment with an alignment clause that is too small, the
modular representation cannot be used. For example, consider the
following set of declarations:

    type R is range 1 .. 3;
    type S is array (1 .. 31) of R;
    for S'Component_Size use 2;
    for S'Size use 62;
    for S'Alignment use 1;

If the alignment clause were not present, then a 62-bit modular
representation would be chosen (typically with an alignment of 4 or 8
bytes depending on the target). But the default alignment is overridden
with the explicit alignment clause. This means that the modular
representation cannot be used, and instead the array of bytes
representation must be used, meaning that the length must be a multiple
of 8. Thus the above set of declarations will result in a diagnostic
rejecting the size clause and noting that the minimum size allowed is
64.

One special case that is worth noting occurs when the base type of the
component size is 8/16/32 and the subtype is one bit less. Notably this
occurs with subtype `Natural'. Consider:

    type Arr is array (1 .. 32) of Natural;
    pragma Pack (Arr);

In all commonly used Ada 83 compilers, this pragma Pack would be
ignored, since typically `Natural'Size' is 32 in Ada 83, and in any
case most Ada 83 compilers did not attempt 31 bit packing.

In Ada 95 and Ada 2005, `Natural'Size' is required to be 31.
Furthermore, GNAT really does pack 31-bit subtype to 31 bits. This may
result in a substantial unintended performance penalty when porting
legacy Ada 83 code.  To help prevent this, GNAT generates a warning in
such cases. If you really want 31 bit packing in a case like this, you
can set the component size explicitly:

    type Arr is array (1 .. 32) of Natural;
    for Arr'Component_Size use 31;

Here 31-bit packing is achieved as required, and no warning is
generated, since in this case the programmer intention is clear.


File: gnat_rm.info,  Node: Pragma Pack for Records,  Next: Record Representation Clauses,  Prev: Pragma Pack for Arrays,  Up: Representation Clauses and Pragmas

9.11 Pragma Pack for Records
============================

Pragma `Pack' applied to a record will pack the components to reduce
wasted space from alignment gaps and by reducing the amount of space
taken by components.  We distinguish between `packable' components and
`non-packable' components.  Components of the following types are
considered packable:

   * Components of a primitive type are packable unless they are aliased
     or of an atomic type.

   * Small packed arrays, whose size does not exceed 64 bits, and where
     the size is statically known at compile time, are represented
     internally as modular integers, and so they are also packable.

All packable components occupy the exact number of bits corresponding to
their `Size' value, and are packed with no padding bits, i.e., they can
start on an arbitrary bit boundary.

All other types are non-packable, they occupy an integral number of
storage units, and are placed at a boundary corresponding to their
alignment requirements.

For example, consider the record

    type Rb1 is array (1 .. 13) of Boolean;
    pragma Pack (Rb1);

    type Rb2 is array (1 .. 65) of Boolean;
    pragma Pack (Rb2);

    type AF is new Float with Atomic;

    type X2 is record
       L1 : Boolean;
       L2 : Duration;
       L3 : AF;
       L4 : Boolean;
       L5 : Rb1;
       L6 : Rb2;
    end record;
    pragma Pack (X2);

The representation for the record X2 is as follows:

    for X2'Size use 224;
    for X2 use record
       L1 at  0 range  0 .. 0;
       L2 at  0 range  1 .. 64;
       L3 at 12 range  0 .. 31;
       L4 at 16 range  0 .. 0;
       L5 at 16 range  1 .. 13;
       L6 at 18 range  0 .. 71;
    end record;

Studying this example, we see that the packable fields `L1' and `L2' are
of length equal to their sizes, and placed at specific bit boundaries
(and not byte boundaries) to eliminate padding.  But `L3' is of a
non-packable float type (because it is aliased), so it is on the next
appropriate alignment boundary.

The next two fields are fully packable, so `L4' and `L5' are minimally
packed with no gaps.  However, type `Rb2' is a packed array that is
longer than 64 bits, so it is itself non-packable.  Thus the `L6' field
is aligned to the next byte boundary, and takes an integral number of
bytes, i.e., 72 bits.


File: gnat_rm.info,  Node: Record Representation Clauses,  Next: Handling of Records with Holes,  Prev: Pragma Pack for Records,  Up: Representation Clauses and Pragmas

9.12 Record Representation Clauses
==================================

Record representation clauses may be given for all record types,
including types obtained by record extension.  Component clauses are
allowed for any static component.  The restrictions on component
clauses depend on the type of the component.

For all components of an elementary type, the only restriction on
component clauses is that the size must be at least the 'Size value of
the type (actually the Value_Size).  There are no restrictions due to
alignment, and such components may freely cross storage boundaries.

Packed arrays with a size up to and including 64 bits are represented
internally using a modular type with the appropriate number of bits, and
thus the same lack of restriction applies.  For example, if you declare:

    type R is array (1 .. 49) of Boolean;
    pragma Pack (R);
    for R'Size use 49;

then a component clause for a component of type R may start on any
specified bit boundary, and may specify a value of 49 bits or greater.

For packed bit arrays that are longer than 64 bits, there are two
cases. If the component size is a power of 2 (1,2,4,8,16,32 bits),
including the important case of single bits or boolean values, then
there are no limitations on placement of such components, and they may
start and end at arbitrary bit boundaries.

If the component size is not a power of 2 (e.g., 3 or 5), then an array
of this type longer than 64 bits must always be placed on on a storage
unit (byte) boundary and occupy an integral number of storage units
(bytes). Any component clause that does not meet this requirement will
be rejected.

Any aliased component, or component of an aliased type, must have its
normal alignment and size. A component clause that does not meet this
requirement will be rejected.

The tag field of a tagged type always occupies an address sized field at
the start of the record.  No component clause may attempt to overlay
this tag. When a tagged type appears as a component, the tag field must
have proper alignment

In the case of a record extension T1, of a type T, no component clause
applied to the type T1 can specify a storage location that would
overlap the first T'Size bytes of the record.

For all other component types, including non-bit-packed arrays, the
component can be placed at an arbitrary bit boundary, so for example,
the following is permitted:

    type R is array (1 .. 10) of Boolean;
    for R'Size use 80;

    type Q is record
       G, H : Boolean;
       L, M : R;
    end record;

    for Q use record
       G at 0 range  0 ..   0;
       H at 0 range  1 ..   1;
       L at 0 range  2 ..  81;
       R at 0 range 82 .. 161;
    end record;

Note: the above rules apply to recent releases of GNAT 5.  In GNAT 3,
there are more severe restrictions on larger components.  For
non-primitive types, including packed arrays with a size greater than
64 bits, component clauses must respect the alignment requirement of the
type, in particular, always starting on a byte boundary, and the length
must be a multiple of the storage unit.


File: gnat_rm.info,  Node: Handling of Records with Holes,  Next: Enumeration Clauses,  Prev: Record Representation Clauses,  Up: Representation Clauses and Pragmas

9.13 Handling of Records with Holes
===================================

As a result of alignment considerations, records may contain "holes" or
gaps which do not correspond to the data bits of any of the components.
Record representation clauses can also result in holes in records.

GNAT does not attempt to clear these holes, so in record objects, they
should be considered to hold undefined rubbish. The generated equality
routine just tests components so does not access these undefined bits,
and assignment and copy operations may or may not preserve the contents
of these holes (for assignments, the holes in the target will in
practice contain either the bits that are present in the holes in the
source, or the bits that were present in the target before the
assignment).

If it is necessary to ensure that holes in records have all zero bits,
then record objects for which this initialization is desired should be
explicitly set to all zero values using Unchecked_Conversion or address
overlays. For example

    type HRec is record
       C : Character;
       I : Integer;
    end record;

On typical machines, integers need to be aligned on a four-byte
boundary, resulting in three bytes of undefined rubbish following the
8-bit field for C. To ensure that the hole in a variable of type HRec
is set to all zero bits, you could for example do:

    type Base is record
       Dummy1, Dummy2 : Integer := 0;
    end record;

    BaseVar : Base;
    RealVar : Hrec;
    for RealVar'Address use BaseVar'Address;

Now the 8-bytes of the value of RealVar start out containing all zero
bits. A safer approach is to just define dummy fields, avoiding the
holes, as in:

    type HRec is record
       C      : Character;
       Dummy1 : Short_Short_Integer := 0;
       Dummy2 : Short_Short_Integer := 0;
       Dummy3 : Short_Short_Integer := 0;
       I      : Integer;
    end record;

And to make absolutely sure that the intent of this is followed, you
can use representation clauses:

    for Hrec use record
       C      at 0 range 0 .. 7;
       Dummy1 at 1 range 0 .. 7;
       Dummy2 at 2 range 0 .. 7;
       Dummy3 at 3 range 0 .. 7;
       I      at 4 range 0 .. 31;
    end record;
    for Hrec'Size use 64;


File: gnat_rm.info,  Node: Enumeration Clauses,  Next: Address Clauses,  Prev: Handling of Records with Holes,  Up: Representation Clauses and Pragmas

9.14 Enumeration Clauses
========================

The only restriction on enumeration clauses is that the range of values
must be representable.  For the signed case, if one or more of the
representation values are negative, all values must be in the range:

    System.Min_Int .. System.Max_Int

For the unsigned case, where all values are nonnegative, the values must
be in the range:

    0 .. System.Max_Binary_Modulus;

A `confirming' representation clause is one in which the values range
from 0 in sequence, i.e., a clause that confirms the default
representation for an enumeration type.  Such a confirming
representation is permitted by these rules, and is specially recognized
by the compiler so that no extra overhead results from the use of such
a clause.

If an array has an index type which is an enumeration type to which an
enumeration clause has been applied, then the array is stored in a
compact manner.  Consider the declarations:

    type r is (A, B, C);
    for r use (A => 1, B => 5, C => 10);
    type t is array (r) of Character;

The array type t corresponds to a vector with exactly three elements and
has a default size equal to `3*Character'Size'.  This ensures efficient
use of space, but means that accesses to elements of the array will
incur the overhead of converting representation values to the
corresponding positional values, (i.e., the value delivered by the
`Pos' attribute).


File: gnat_rm.info,  Node: Address Clauses,  Next: Use of Address Clauses for Memory-Mapped I/O,  Prev: Enumeration Clauses,  Up: Representation Clauses and Pragmas

9.15 Address Clauses
====================

The reference manual allows a general restriction on representation
clauses, as found in RM 13.1(22):

     "An implementation need not support representation items
     containing nonstatic expressions, except that an implementation
     should support a representation item for a given entity if each
     nonstatic expression in the representation item is a name that
     statically denotes a constant declared before the entity."

In practice this is applicable only to address clauses, since this is
the only case in which a non-static expression is permitted by the
syntax.  As the AARM notes in sections 13.1 (22.a-22.h):

     22.a   Reason: This is to avoid the following sort of thing:

     22.b        X : Integer := F(...); Y : Address := G(...); for
     X'Address use Y;

     22.c   In the above, we have to evaluate the initialization
     expression for X before we know where to put the result.  This
     seems like an unreasonable implementation burden.

     22.d   The above code should instead be written like this:

     22.e        Y : constant Address := G(...); X : Integer := F(...);
     for X'Address use Y;

     22.f   This allows the expression 'Y' to be safely evaluated
     before X is created.

     22.g   The constant could be a formal parameter of mode in.

     22.h   An implementation can support other nonstatic expressions
     if it wants to.  Expressions of type Address are hardly ever
     static, but their value might be known at compile time anyway in
     many cases.

GNAT does indeed permit many additional cases of non-static
expressions.  In particular, if the type involved is elementary there
are no restrictions (since in this case, holding a temporary copy of
the initialization value, if one is present, is inexpensive).  In
addition, if there is no implicit or explicit initialization, then
there are no restrictions.  GNAT will reject only the case where all
three of these conditions hold:

   * The type of the item is non-elementary (e.g., a record or array).

   * There is explicit or implicit initialization required for the
     object.  Note that access values are always implicitly initialized.

   * The address value is non-static.  Here GNAT is more permissive
     than the RM, and allows the address value to be the address of a
     previously declared stand-alone variable, as long as it does not
     itself have an address clause.

         Anchor  : Some_Initialized_Type;
         Overlay : Some_Initialized_Type;
         for Overlay'Address use Anchor'Address;

     However, the prefix of the address clause cannot be an array
     component, or a component of a discriminated record.

As noted above in section 22.h, address values are typically
non-static.  In particular the To_Address function, even if applied to
a literal value, is a non-static function call.  To avoid this minor
annoyance, GNAT provides the implementation defined attribute
'To_Address.  The following two expressions have identical values:

    To_Address (16#1234_0000#)
    System'To_Address (16#1234_0000#);

except that the second form is considered to be a static expression, and
thus when used as an address clause value is always permitted.

Additionally, GNAT treats as static an address clause that is an
unchecked_conversion of a static integer value.  This simplifies the
porting of legacy code, and provides a portable equivalent to the GNAT
attribute `To_Address'.

Another issue with address clauses is the interaction with alignment
requirements.  When an address clause is given for an object, the
address value must be consistent with the alignment of the object
(which is usually the same as the alignment of the type of the object).
If an address clause is given that specifies an inappropriately
aligned address value, then the program execution is erroneous.

Since this source of erroneous behavior can have unfortunate effects on
machines with strict alignment requirements, GNAT checks (at compile
time if possible, generating a warning, or at execution time with a
run-time check) that the alignment is appropriate.  If the run-time
check fails, then `Program_Error' is raised.  This run-time check is
suppressed if range checks are suppressed, or if the special GNAT check
Alignment_Check is suppressed, or if `pragma Restrictions
(No_Elaboration_Code)' is in effect. It is also suppressed by default
on non-strict alignment machines (such as the x86).

Finally, GNAT does not permit overlaying of objects of controlled types
or composite types containing a controlled component. In most cases,
the compiler can detect an attempt at such overlays and will generate a
warning at compile time and a Program_Error exception at run time.

An address clause cannot be given for an exported object.  More
understandably the real restriction is that objects with an address
clause cannot be exported.  This is because such variables are not
defined by the Ada program, so there is no external object to export.

It is permissible to give an address clause and a pragma Import for the
same object.  In this case, the variable is not really defined by the
Ada program, so there is no external symbol to be linked.  The link name
and the external name are ignored in this case.  The reason that we
allow this combination is that it provides a useful idiom to avoid
unwanted initializations on objects with address clauses.

When an address clause is given for an object that has implicit or
explicit initialization, then by default initialization takes place.
This means that the effect of the object declaration is to overwrite the
memory at the specified address.  This is almost always not what the
programmer wants, so GNAT will output a warning:

    with System;
    package G is
       type R is record
          M : Integer := 0;
       end record;

       Ext : R;
       for Ext'Address use System'To_Address (16#1234_1234#);
           |
    >>> warning: implicit initialization of "Ext" may
        modify overlaid storage
    >>> warning: use pragma Import for "Ext" to suppress
        initialization (RM B(24))

    end G;

As indicated by the warning message, the solution is to use a (dummy)
pragma Import to suppress this initialization.  The pragma tell the
compiler that the object is declared and initialized elsewhere.  The
following package compiles without warnings (and the initialization is
suppressed):

    with System;
    package G is
       type R is record
          M : Integer := 0;
       end record;

       Ext : R;
       for Ext'Address use System'To_Address (16#1234_1234#);
       pragma Import (Ada, Ext);
    end G;

A final issue with address clauses involves their use for overlaying
variables, as in the following example:

    A : Integer;
    B : Integer;
    for B'Address use A'Address;

or alternatively, using the form recommended by the RM:

    A    : Integer;
    Addr : constant Address := A'Address;
    B    : Integer;
    for B'Address use Addr;

In both of these cases, `A' and `B' become aliased to one another via
the address clause. This use of address clauses to overlay variables,
achieving an effect similar to unchecked conversion was erroneous in
Ada 83, but in Ada 95 and Ada 2005 the effect is implementation
defined. Furthermore, the Ada RM specifically recommends that in a
situation like this, `B' should be subject to the following
implementation advice (RM 13.3(19)):

     "19  If the Address of an object is specified, or it is imported
     or exported, then the implementation should not perform
     optimizations based on assumptions of no aliases."

GNAT follows this recommendation, and goes further by also applying
this recommendation to the overlaid variable (`A' in the above example)
in this case. This means that the overlay works "as expected", in that
a modification to one of the variables will affect the value of the
other.

Note that when address clause overlays are used in this way, there is an
issue of unintentional initialization, as shown by this example:

    package Overwrite_Record is
       type R is record
          A : Character := 'C';
          B : Character := 'A';
       end record;
       X : Short_Integer := 3;
       Y : R;
       for Y'Address use X'Address;
           |
    >>> warning: default initialization of "Y" may
        modify "X", use pragma Import for "Y" to
        suppress initialization (RM B.1(24))

    end Overwrite_Record;

Here the default initialization of `Y' will clobber the value of `X',
which justifies the warning. The warning notes that this effect can be
eliminated by adding a `pragma Import' which suppresses the
initialization:

    package Overwrite_Record is
       type R is record
          A : Character := 'C';
          B : Character := 'A';
       end record;
       X : Short_Integer := 3;
       Y : R;
       for Y'Address use X'Address;
       pragma Import (Ada, Y);
    end Overwrite_Record;

Note that the use of `pragma Initialize_Scalars' may cause variables to
be initialized when they would not otherwise have been in the absence
of the use of this pragma. This may cause an overlay to have this
unintended clobbering effect. The compiler avoids this for scalar
types, but not for composite objects (where in general the effect of
`Initialize_Scalars' is part of the initialization routine for the
composite object:

    pragma Initialize_Scalars;
    with Ada.Text_IO;  use Ada.Text_IO;
    procedure Overwrite_Array is
       type Arr is array (1 .. 5) of Integer;
       X : Arr := (others => 1);
       A : Arr;
       for A'Address use X'Address;
           |
    >>> warning: default initialization of "A" may
        modify "X", use pragma Import for "A" to
        suppress initialization (RM B.1(24))

    begin
       if X /= Arr'(others => 1) then
          Put_Line ("X was clobbered");
       else
          Put_Line ("X was not clobbered");
       end if;
    end Overwrite_Array;

The above program generates the warning as shown, and at execution
time, prints `X was clobbered'. If the `pragma Import' is added as
suggested:

    pragma Initialize_Scalars;
    with Ada.Text_IO;  use Ada.Text_IO;
    procedure Overwrite_Array is
       type Arr is array (1 .. 5) of Integer;
       X : Arr := (others => 1);
       A : Arr;
       for A'Address use X'Address;
       pragma Import (Ada, A);
    begin
       if X /= Arr'(others => 1) then
          Put_Line ("X was clobbered");
       else
          Put_Line ("X was not clobbered");
       end if;
    end Overwrite_Array;

then the program compiles without the warning and when run will generate
the output `X was not clobbered'.


File: gnat_rm.info,  Node: Use of Address Clauses for Memory-Mapped I/O,  Next: Effect of Convention on Representation,  Prev: Address Clauses,  Up: Representation Clauses and Pragmas

9.16 Use of Address Clauses for Memory-Mapped I/O
=================================================

A common pattern is to use an address clause to map an atomic variable
to a location in memory that corresponds to a memory-mapped I/O
operation or operations, for example:

    type Mem_Word is record
       A,B,C,D : Byte;
    end record;
    pragma Atomic (Mem_Word);
    for Mem_Word_Size use 32;

    Mem : Mem_Word;
    for Mem'Address use some-address;
    ...
    Temp := Mem;
    Temp.A := 32;
    Mem := Temp;

For a full access (reference or modification) of the variable (Mem) in
this case, as in the above examples, GNAT guarantees that the entire
atomic word will be accessed. It is not clear whether the RM requires
this. For example in the above, can the compiler reference only the
Mem.A field as an optimization? Whatever the answer to this question
is, GNAT makes the guarantee that for such a reference, the entire word
is read or written.

A problem arises with a component access such as:

    Mem.A := 32;

Note that the component A is not declared as atomic. This means that it
is not clear what this assignment means. It could correspond to full
word read and write as given in the first example, or on architectures
that supported such an operation it might be a single byte store
instruction. The RM does not have anything to say in this situation,
and GNAT does not make any guarantee. The code generated may vary from
target to target. GNAT will issue a warning in such a case:

    Mem.A := 32;
    |
    >>> warning: access to non-atomic component of atomic array,
        may cause unexpected accesses to atomic object

It is best to be explicit in this situation, by either declaring the
components to be atomic if you want the byte store, or explicitly
writing the full word access sequence if that is what the hardware
requires.


File: gnat_rm.info,  Node: Effect of Convention on Representation,  Next: Conventions and Anonymous Access Types,  Prev: Use of Address Clauses for Memory-Mapped I/O,  Up: Representation Clauses and Pragmas

9.17 Effect of Convention on Representation
===========================================

Normally the specification of a foreign language convention for a type
or an object has no effect on the chosen representation.  In
particular, the representation chosen for data in GNAT generally meets
the standard system conventions, and for example records are laid out
in a manner that is consistent with C.  This means that specifying
convention C (for example) has no effect.

There are four exceptions to this general rule:

   * `Convention Fortran and array subtypes'.

     If pragma Convention Fortran is specified for an array subtype,
     then in accordance with the implementation advice in section
     3.6.2(11) of the Ada Reference Manual, the array will be stored in
     a Fortran-compatible column-major manner, instead of the normal
     default row-major order.

   * `Convention C and enumeration types'

     GNAT normally stores enumeration types in 8, 16, or 32 bits as
     required to accommodate all values of the type.  For example, for
     the enumeration type declared by:

         type Color is (Red, Green, Blue);

     8 bits is sufficient to store all values of the type, so by
     default, objects of type `Color' will be represented using 8 bits.
     However, normal C convention is to use 32 bits for all enum
     values in C, since enum values are essentially of type int.  If
     pragma `Convention C' is specified for an Ada enumeration type,
     then the size is modified as necessary (usually to 32 bits) to be
     consistent with the C convention for enum values.

     Note that this treatment applies only to types. If Convention C is
     given for an enumeration object, where the enumeration type is not
     Convention C, then Object_Size bits are allocated. For example,
     for a normal enumeration type, with less than 256 elements, only 8
     bits will be allocated for the object.  Since this may be a
     surprise in terms of what C expects, GNAT will issue a warning in
     this situation. The warning can be suppressed by giving an explicit
     size clause specifying the desired size.

   * `Convention C/Fortran and Boolean types'

     In C, the usual convention for boolean values, that is values used
     for conditions, is that zero represents false, and nonzero values
     represent true.  In Ada, the normal convention is that two
     specific values, typically 0/1, are used to represent false/true
     respectively.

     Fortran has a similar convention for `LOGICAL' values (any nonzero
     value represents true).

     To accommodate the Fortran and C conventions, if a pragma
     Convention specifies C or Fortran convention for a derived
     Boolean, as in the following example:

         type C_Switch is new Boolean;
         pragma Convention (C, C_Switch);

     then the GNAT generated code will treat any nonzero value as true.
     For truth values generated by GNAT, the conventional value 1 will
     be used for True, but when one of these values is read, any
     nonzero value is treated as True.


File: gnat_rm.info,  Node: Conventions and Anonymous Access Types,  Next: Determining the Representations chosen by GNAT,  Prev: Effect of Convention on Representation,  Up: Representation Clauses and Pragmas

9.18 Conventions and Anonymous Access Types
===========================================

The RM is not entirely clear on convention handling in a number of
cases, and in particular, it is not clear on the convention to be given
to anonymous access types in general, and in particular what is to be
done for the case of anonymous access-to-subprogram.

In GNAT, we decide that if an explicit Convention is applied to an
object or component, and its type is such an anonymous type, then the
convention will apply to this anonymous type as well. This seems to
make sense since it is anomolous in any case to have a different
convention for an object and its type, and there is clearly no way to
explicitly specify a convention for an anonymous type, since it doesn't
have a name to specify!

Furthermore, we decide that if a convention is applied to a record type,
then this convention is inherited by any of its components that are of
an anonymous access type which do not have an explicitly specified
convention.

The following program shows these conventions in action:

    package ConvComp is
       type Foo is range 1 .. 10;
       type T1 is record
          A : access function (X : Foo) return Integer;
          B : Integer;
       end record;
       pragma Convention (C, T1);

       type T2 is record
          A : access function (X : Foo) return Integer;
          pragma Convention  (C, A);
          B : Integer;
       end record;
       pragma Convention (COBOL, T2);

       type T3 is record
          A : access function (X : Foo) return Integer;
          pragma Convention  (COBOL, A);
          B : Integer;
       end record;
       pragma Convention (C, T3);

       type T4 is record
          A : access function (X : Foo) return Integer;
          B : Integer;
       end record;
       pragma Convention (COBOL, T4);

       function F (X : Foo) return Integer;
       pragma Convention (C, F);

       function F (X : Foo) return Integer is (13);

       TV1 : T1 := (F'Access, 12);  -- OK
       TV2 : T2 := (F'Access, 13);  -- OK

       TV3 : T3 := (F'Access, 13);  -- ERROR
                    |
    >>> subprogram "F" has wrong convention
    >>> does not match access to subprogram declared at line 17
         38.    TV4 : T4 := (F'Access, 13);  -- ERROR
                    |
    >>> subprogram "F" has wrong convention
    >>> does not match access to subprogram declared at line 24
         39. end ConvComp;


File: gnat_rm.info,  Node: Determining the Representations chosen by GNAT,  Prev: Conventions and Anonymous Access Types,  Up: Representation Clauses and Pragmas

9.19 Determining the Representations chosen by GNAT
===================================================

Although the descriptions in this section are intended to be complete,
it is often easier to simply experiment to see what GNAT accepts and
what the effect is on the layout of types and objects.

As required by the Ada RM, if a representation clause is not accepted,
then it must be rejected as illegal by the compiler.  However, when a
representation clause or pragma is accepted, there can still be
questions of what the compiler actually does.  For example, if a
partial record representation clause specifies the location of some
components and not others, then where are the non-specified components
placed? Or if pragma `Pack' is used on a record, then exactly where are
the resulting fields placed? The section on pragma `Pack' in this
chapter can be used to answer the second question, but it is often
easier to just see what the compiler does.

For this purpose, GNAT provides the option `-gnatR'.  If you compile
with this option, then the compiler will output information on the
actual representations chosen, in a format similar to source
representation clauses.  For example, if we compile the package:

    package q is
       type r (x : boolean) is tagged record
          case x is
             when True => S : String (1 .. 100);
             when False => null;
          end case;
       end record;

       type r2 is new r (false) with record
          y2 : integer;
       end record;

       for r2 use record
          y2 at 16 range 0 .. 31;
       end record;

       type x is record
          y : character;
       end record;

       type x1 is array (1 .. 10) of x;
       for x1'component_size use 11;

       type ia is access integer;

       type Rb1 is array (1 .. 13) of Boolean;
       pragma Pack (rb1);

       type Rb2 is array (1 .. 65) of Boolean;
       pragma Pack (rb2);

       type x2 is record
          l1 : Boolean;
          l2 : Duration;
          l3 : Float;
          l4 : Boolean;
          l5 : Rb1;
          l6 : Rb2;
       end record;
       pragma Pack (x2);
    end q;

using the switch `-gnatR' we obtain the following output:

    Representation information for unit q
    -------------------------------------

    for r'Size use ??;
    for r'Alignment use 4;
    for r use record
       x    at 4 range  0 .. 7;
       _tag at 0 range  0 .. 31;
       s    at 5 range  0 .. 799;
    end record;

    for r2'Size use 160;
    for r2'Alignment use 4;
    for r2 use record
       x       at  4 range  0 .. 7;
       _tag    at  0 range  0 .. 31;
       _parent at  0 range  0 .. 63;
       y2      at 16 range  0 .. 31;
    end record;

    for x'Size use 8;
    for x'Alignment use 1;
    for x use record
       y at 0 range  0 .. 7;
    end record;

    for x1'Size use 112;
    for x1'Alignment use 1;
    for x1'Component_Size use 11;

    for rb1'Size use 13;
    for rb1'Alignment use 2;
    for rb1'Component_Size use 1;

    for rb2'Size use 72;
    for rb2'Alignment use 1;
    for rb2'Component_Size use 1;

    for x2'Size use 224;
    for x2'Alignment use 4;
    for x2 use record
       l1 at  0 range  0 .. 0;
       l2 at  0 range  1 .. 64;
       l3 at 12 range  0 .. 31;
       l4 at 16 range  0 .. 0;
       l5 at 16 range  1 .. 13;
       l6 at 18 range  0 .. 71;
    end record;

The Size values are actually the Object_Size, i.e., the default size
that will be allocated for objects of the type.  The `??' size for type
r indicates that we have a variant record, and the actual size of
objects will depend on the discriminant value.

The Alignment values show the actual alignment chosen by the compiler
for each record or array type.

The record representation clause for type r shows where all fields are
placed, including the compiler generated tag field (whose location
cannot be controlled by the programmer).

The record representation clause for the type extension r2 shows all the
fields present, including the parent field, which is a copy of the
fields of the parent type of r2, i.e., r1.

The component size and size clauses for types rb1 and rb2 show the
exact effect of pragma `Pack' on these arrays, and the record
representation clause for type x2 shows how pragma `Pack' affects this
record type.

In some cases, it may be useful to cut and paste the representation
clauses generated by the compiler into the original source to fix and
guarantee the actual representation to be used.


File: gnat_rm.info,  Node: Standard Library Routines,  Next: The Implementation of Standard I/O,  Prev: Representation Clauses and Pragmas,  Up: Top

10 Standard Library Routines
****************************

The Ada Reference Manual contains in Annex A a full description of an
extensive set of standard library routines that can be used in any Ada
program, and which must be provided by all Ada compilers.  They are
analogous to the standard C library used by C programs.

GNAT implements all of the facilities described in annex A, and for most
purposes the description in the Ada Reference Manual, or appropriate Ada
text book, will be sufficient for making use of these facilities.

In the case of the input-output facilities, *Note The Implementation of
Standard I/O: f, gives details on exactly how GNAT interfaces to the
file system.  For the remaining packages, the Ada Reference Manual
should be sufficient.  The following is a list of the packages included,
together with a brief description of the functionality that is provided.

For completeness, references are included to other predefined library
routines defined in other sections of the Ada Reference Manual (these
are cross-indexed from Annex A). For further details see the relevant
package declarations in the run-time library. In particular, a few units
are not implemented, as marked by the presence of pragma
Unimplemented_Unit, and in this case the package declaration contains
comments explaining why the unit is not implemented.

`Ada' `(A.2)'
     This is a parent package for all the standard library packages.
     It is usually included implicitly in your program, and itself
     contains no useful data or routines.

`Ada.Assertions' `(11.4.2)'
     `Assertions' provides the `Assert' subprograms, and also the
     declaration of the `Assertion_Error' exception.

`Ada.Asynchronous_Task_Control' `(D.11)'
     `Asynchronous_Task_Control' provides low level facilities for task
     synchronization. It is typically not implemented. See package spec
     for details.

`Ada.Calendar' `(9.6)'
     `Calendar' provides time of day access, and routines for
     manipulating times and durations.

`Ada.Calendar.Arithmetic' `(9.6.1)'
     This package provides additional arithmetic operations for
     `Calendar'.

`Ada.Calendar.Formatting' `(9.6.1)'
     This package provides formatting operations for `Calendar'.

`Ada.Calendar.Time_Zones' `(9.6.1)'
     This package provides additional `Calendar' facilities for
     handling time zones.

`Ada.Characters' `(A.3.1)'
     This is a dummy parent package that contains no useful entities

`Ada.Characters.Conversions' `(A.3.2)'
     This package provides character conversion functions.

`Ada.Characters.Handling' `(A.3.2)'
     This package provides some basic character handling capabilities,
     including classification functions for classes of characters
     (e.g., test for letters, or digits).

`Ada.Characters.Latin_1' `(A.3.3)'
     This package includes a complete set of definitions of the
     characters that appear in type CHARACTER.  It is useful for
     writing programs that will run in international environments.  For
     example, if you want an upper case E with an acute accent in a
     string, it is often better to use the definition of `UC_E_Acute'
     in this package.  Then your program will print in an
     understandable manner even if your environment does not support
     these extended characters.

`Ada.Command_Line' `(A.15)'
     This package provides access to the command line parameters and
     the name of the current program (analogous to the use of `argc'
     and `argv' in C), and also allows the exit status for the program
     to be set in a system-independent manner.

`Ada.Complex_Text_IO' `(G.1.3)'
     This package provides text input and output of complex numbers.

`Ada.Containers' `(A.18.1)'
     A top level package providing a few basic definitions used by all
     the following specific child packages that provide specific kinds
     of containers.

`Ada.Containers.Bounded_Priority_Queues' `(A.18.31)'

`Ada.Containers.Bounded_Synchronized_Queues' `(A.18.29)'

`Ada.Containers.Doubly_Linked_Lists' `(A.18.3)'

`Ada.Containers.Generic_Array_Sort' `(A.18.26)'

`Ada.Containers.Generic_Constrained_Array_Sort' `(A.18.26)'

`Ada.Containers.Generic_Sort' `(A.18.26)'

`Ada.Containers.Hashed_Maps' `(A.18.5)'

`Ada.Containers.Hashed_Sets' `(A.18.8)'

`Ada.Containers.Indefinite_Doubly_Linked_Lists' `(A.18.12)'

`Ada.Containers.Indefinite_Hashed_Maps' `(A.18.13)'

`Ada.Containers.Indefinite_Hashed_Sets' `(A.18.15)'

`Ada.Containers.Indefinite_Holders' `(A.18.18)'

`Ada.Containers.Indefinite_Multiway_Trees' `(A.18.17)'

`Ada.Containers.Indefinite_Ordered_Maps' `(A.18.14)'

`Ada.Containers.Indefinite_Ordered_Sets' `(A.18.16)'

`Ada.Containers.Indefinite_Vectors' `(A.18.11)'

`Ada.Containers.Multiway_Trees' `(A.18.10)'

`Ada.Containers.Ordered_Maps' `(A.18.6)'

`Ada.Containers.Ordered_Sets' `(A.18.9)'

`Ada.Containers.Synchronized_Queue_Interfaces' `(A.18.27)'

`Ada.Containers.Unbounded_Priority_Queues' `(A.18.30)'

`Ada.Containers.Unbounded_Synchronized_Queues' `(A.18.28)'

`Ada.Containers.Vectors' `(A.18.2)'

`Ada.Directories' `(A.16)'
     This package provides operations on directories.

`Ada.Directories.Hierarchical_File_Names' `(A.16.1)'
     This package provides additional directory operations handling
     hiearchical file names.

`Ada.Directories.Information' `(A.16)'
     This is an implementation defined package for additional directory
     operations, which is not implemented in GNAT.

`Ada.Decimal' `(F.2)'
     This package provides constants describing the range of decimal
     numbers implemented, and also a decimal divide routine (analogous
     to the COBOL verb DIVIDE ... GIVING ... REMAINDER ...)

`Ada.Direct_IO' `(A.8.4)'
     This package provides input-output using a model of a set of
     records of fixed-length, containing an arbitrary definite Ada
     type, indexed by an integer record number.

`Ada.Dispatching' `(D.2.1)'
     A parent package containing definitions for task dispatching
     operations.

`Ada.Dispatching.EDF' `(D.2.6)'
     Not implemented in GNAT.

`Ada.Dispatching.Non_Preemptive' `(D.2.4)'
     Not implemented in GNAT.

`Ada.Dispatching.Round_Robin' `(D.2.5)'
     Not implemented in GNAT.

`Ada.Dynamic_Priorities' `(D.5)'
     This package allows the priorities of a task to be adjusted
     dynamically as the task is running.

`Ada.Environment_Variables' `(A.17)'
     This package provides facilities for accessing environment
     variables.

`Ada.Exceptions' `(11.4.1)'
     This package provides additional information on exceptions, and
     also contains facilities for treating exceptions as data objects,
     and raising exceptions with associated messages.

`Ada.Execution_Time' `(D.14)'
     Not implemented in GNAT.

`Ada.Execution_Time.Group_Budgets' `(D.14.2)'
     Not implemented in GNAT.

`Ada.Execution_Time.Timers' `(D.14.1)''
     Not implemented in GNAT.

`Ada.Finalization' `(7.6)'
     This package contains the declarations and subprograms to support
     the use of controlled types, providing for automatic
     initialization and finalization (analogous to the constructors and
     destructors of C++).

`Ada.Float_Text_IO' `(A.10.9)'
     A library level instantiation of Text_IO.Float_IO for type Float.

`Ada.Float_Wide_Text_IO' `(A.10.9)'
     A library level instantiation of Wide_Text_IO.Float_IO for type
     Float.

`Ada.Float_Wide_Wide_Text_IO' `(A.10.9)'
     A library level instantiation of Wide_Wide_Text_IO.Float_IO for
     type Float.

`Ada.Integer_Text_IO' `(A.10.9)'
     A library level instantiation of Text_IO.Integer_IO for type
     Integer.

`Ada.Integer_Wide_Text_IO' `(A.10.9)'
     A library level instantiation of Wide_Text_IO.Integer_IO for type
     Integer.

`Ada.Integer_Wide_Wide_Text_IO' `(A.10.9)'
     A library level instantiation of Wide_Wide_Text_IO.Integer_IO for
     type Integer.

`Ada.Interrupts' `(C.3.2)'
     This package provides facilities for interfacing to interrupts,
     which includes the set of signals or conditions that can be raised
     and recognized as interrupts.

`Ada.Interrupts.Names' `(C.3.2)'
     This package provides the set of interrupt names (actually signal
     or condition names) that can be handled by GNAT.

`Ada.IO_Exceptions' `(A.13)'
     This package defines the set of exceptions that can be raised by
     use of the standard IO packages.

`Ada.Iterator_Interfaces' `(5.5.1)'
     This package provides a generic interface to generalized iterators.

`Ada.Locales' `(A.19)'
     This package provides declarations providing information (Language
     and Country) about the current locale.

`Ada.Numerics'
     This package contains some standard constants and exceptions used
     throughout the numerics packages.  Note that the constants pi and
     e are defined here, and it is better to use these definitions than
     rolling your own.

`Ada.Numerics.Complex_Arrays' `(G.3.2)'
     Provides operations on arrays of complex numbers.

`Ada.Numerics.Complex_Elementary_Functions'
     Provides the implementation of standard elementary functions (such
     as log and trigonometric functions) operating on complex numbers
     using the standard `Float' and the `Complex' and `Imaginary' types
     created by the package `Numerics.Complex_Types'.

`Ada.Numerics.Complex_Types'
     This is a predefined instantiation of
     `Numerics.Generic_Complex_Types' using `Standard.Float' to build
     the type `Complex' and `Imaginary'.

`Ada.Numerics.Discrete_Random'
     This generic package provides a random number generator suitable
     for generating uniformly distributed values of a specified
     discrete subtype.

`Ada.Numerics.Float_Random'
     This package provides a random number generator suitable for
     generating uniformly distributed floating point values in the unit
     interval.

`Ada.Numerics.Generic_Complex_Elementary_Functions'
     This is a generic version of the package that provides the
     implementation of standard elementary functions (such as log and
     trigonometric functions) for an arbitrary complex type.

     The following predefined instantiations of this package are
     provided:

        * `Short_Float'

          `Ada.Numerics.Short_Complex_Elementary_Functions'

        * `Float'

          `Ada.Numerics.Complex_Elementary_Functions'

        * `Long_Float'

          `Ada.Numerics.Long_Complex_Elementary_Functions'

`Ada.Numerics.Generic_Complex_Types'
     This is a generic package that allows the creation of complex
     types, with associated complex arithmetic operations.

     The following predefined instantiations of this package exist

        * `Short_Float'

          `Ada.Numerics.Short_Complex_Complex_Types'

        * `Float'

          `Ada.Numerics.Complex_Complex_Types'

        * `Long_Float'

          `Ada.Numerics.Long_Complex_Complex_Types'

`Ada.Numerics.Generic_Elementary_Functions'
     This is a generic package that provides the implementation of
     standard elementary functions (such as log an trigonometric
     functions) for an arbitrary float type.

     The following predefined instantiations of this package exist

        * `Short_Float'

          `Ada.Numerics.Short_Elementary_Functions'

        * `Float'

          `Ada.Numerics.Elementary_Functions'

        * `Long_Float'

          `Ada.Numerics.Long_Elementary_Functions'

`Ada.Numerics.Generic_Real_Arrays' `(G.3.1)'
     Generic operations on arrays of reals

`Ada.Numerics.Real_Arrays' `(G.3.1)'
     Preinstantiation of Ada.Numerics.Generic_Real_Arrays (Float).

`Ada.Real_Time' `(D.8)'
     This package provides facilities similar to those of `Calendar',
     but operating with a finer clock suitable for real time control.
     Note that annex D requires that there be no backward clock jumps,
     and GNAT generally guarantees this behavior, but of course if the
     external clock on which the GNAT runtime depends is deliberately
     reset by some external event, then such a backward jump may occur.

`Ada.Real_Time.Timing_Events' `(D.15)'
     Not implemented in GNAT.

`Ada.Sequential_IO' `(A.8.1)'
     This package provides input-output facilities for sequential files,
     which can contain a sequence of values of a single type, which can
     be any Ada type, including indefinite (unconstrained) types.

`Ada.Storage_IO' `(A.9)'
     This package provides a facility for mapping arbitrary Ada types
     to and from a storage buffer.  It is primarily intended for the
     creation of new IO packages.

`Ada.Streams' `(13.13.1)'
     This is a generic package that provides the basic support for the
     concept of streams as used by the stream attributes (`Input',
     `Output', `Read' and `Write').

`Ada.Streams.Stream_IO' `(A.12.1)'
     This package is a specialization of the type `Streams' defined in
     package `Streams' together with a set of operations providing
     Stream_IO capability.  The Stream_IO model permits both random and
     sequential access to a file which can contain an arbitrary set of
     values of one or more Ada types.

`Ada.Strings' `(A.4.1)'
     This package provides some basic constants used by the string
     handling packages.

`Ada.Strings.Bounded' `(A.4.4)'
     This package provides facilities for handling variable length
     strings.  The bounded model requires a maximum length.  It is thus
     somewhat more limited than the unbounded model, but avoids the use
     of dynamic allocation or finalization.

`Ada.Strings.Bounded.Equal_Case_Insensitive' `(A.4.10)'
     Provides case-insensitive comparisons of bounded strings

`Ada.Strings.Bounded.Hash' `(A.4.9)'
     This package provides a generic hash function for bounded strings

`Ada.Strings.Bounded.Hash_Case_Insensitive' `(A.4.9)'
     This package provides a generic hash function for bounded strings
     that converts the string to be hashed to lower case.

`Ada.Strings.Bounded.Less_Case_Insensitive' `(A.4.10)'
     This package provides a comparison function for bounded strings
     that works in a case insensitive manner by converting to lower
     case before the comparison.

`Ada.Strings.Fixed' `(A.4.3)'
     This package provides facilities for handling fixed length strings.

`Ada.Strings.Fixed.Equal_Case_Insensitive' `(A.4.10)'
     This package provides an equality function for fixed strings that
     compares the strings after converting both to lower case.

`Ada.Strings.Fixed.Hash_Case_Insensitive' `(A.4.9)'
     This package provides a case insensitive hash function for fixed
     strings that converts the string to lower case before computing
     the hash.

`Ada.Strings.Fixed.Less_Case_Insensitive' `(A.4.10)'
     This package provides a comparison function for fixed strings that
     works in a case insensitive manner by converting to lower case
     before the comparison.

`Ada.Strings.Hash' `(A.4.9)'
     This package provides a hash function for strings.

`Ada.Strings.Hash_Case_Insensitive' `(A.4.9)'
     This package provides a hash function for strings that is case
     insensitive.  The string is converted to lower case before
     computing the hash.

`Ada.Strings.Less_Case_Insensitive' `(A.4.10)'
     This package provides a comparison function for\strings that works
     in a case insensitive manner by converting to lower case before
     the comparison.

`Ada.Strings.Maps' `(A.4.2)'
     This package provides facilities for handling character mappings
     and arbitrarily defined subsets of characters.  For instance it is
     useful in defining specialized translation tables.

`Ada.Strings.Maps.Constants' `(A.4.6)'
     This package provides a standard set of predefined mappings and
     predefined character sets.  For example, the standard upper to
     lower case conversion table is found in this package.  Note that
     upper to lower case conversion is non-trivial if you want to take
     the entire set of characters, including extended characters like E
     with an acute accent, into account.  You should use the mappings
     in this package (rather than adding 32 yourself) to do case
     mappings.

`Ada.Strings.Unbounded' `(A.4.5)'
     This package provides facilities for handling variable length
     strings.  The unbounded model allows arbitrary length strings, but
     requires the use of dynamic allocation and finalization.

`Ada.Strings.Unbounded.Equal_Case_Insensitive' `(A.4.10)'
     Provides case-insensitive comparisons of unbounded strings

`Ada.Strings.Unbounded.Hash' `(A.4.9)'
     This package provides a generic hash function for unbounded strings

`Ada.Strings.Unbounded.Hash_Case_Insensitive' `(A.4.9)'
     This package provides a generic hash function for unbounded
     strings that converts the string to be hashed to lower case.

`Ada.Strings.Unbounded.Less_Case_Insensitive' `(A.4.10)'
     This package provides a comparison function for unbounded strings
     that works in a case insensitive manner by converting to lower
     case before the comparison.

`Ada.Strings.UTF_Encoding' `(A.4.11)'
     This package provides basic definitions for dealing with
     UTF-encoded strings.

`Ada.Strings.UTF_Encoding.Conversions' `(A.4.11)'
     This package provides conversion functions for UTF-encoded strings.

`Ada.Strings.UTF_Encoding.Strings' `(A.4.11)'

`Ada.Strings.UTF_Encoding.Wide_Strings' `(A.4.11)'

`Ada.Strings.UTF_Encoding.Wide_Wide_Strings' `(A.4.11)'
     These packages provide facilities for handling UTF encodings for
     Strings, Wide_Strings and Wide_Wide_Strings.

`Ada.Strings.Wide_Bounded' `(A.4.7)'

`Ada.Strings.Wide_Fixed' `(A.4.7)'

`Ada.Strings.Wide_Maps' `(A.4.7)'

`Ada.Strings.Wide_Unbounded' `(A.4.7)'
     These packages provide analogous capabilities to the corresponding
     packages without `Wide_' in the name, but operate with the types
     `Wide_String' and `Wide_Character' instead of `String' and
     `Character'. Versions of all the child packages are available.

`Ada.Strings.Wide_Wide_Bounded' `(A.4.7)'

`Ada.Strings.Wide_Wide_Fixed' `(A.4.7)'

`Ada.Strings.Wide_Wide_Maps' `(A.4.7)'

`Ada.Strings.Wide_Wide_Unbounded' `(A.4.7)'
     These packages provide analogous capabilities to the corresponding
     packages without `Wide_' in the name, but operate with the types
     `Wide_Wide_String' and `Wide_Wide_Character' instead of `String'
     and `Character'.

`Ada.Synchronous_Barriers' `(D.10.1)'
     This package provides facilities for synchronizing tasks at a low
     level with barriers.

`Ada.Synchronous_Task_Control' `(D.10)'
     This package provides some standard facilities for controlling task
     communication in a synchronous manner.

`Ada.Synchronous_Task_Control.EDF' `(D.10)'
     Not implemented in GNAT.

`Ada.Tags'
     This package contains definitions for manipulation of the tags of
     tagged values.

`Ada.Tags.Generic_Dispatching_Constructor' `(3.9)'
     This package provides a way of constructing tagged class-wide
     values given only the tag value.

`Ada.Task_Attributes' `(C.7.2)'
     This package provides the capability of associating arbitrary
     task-specific data with separate tasks.

`Ada.Task_Identifification' `(C.7.1)'
     This package provides capabilities for task identification.

`Ada.Task_Termination' `(C.7.3)'
     This package provides control over task termination.

`Ada.Text_IO'
     This package provides basic text input-output capabilities for
     character, string and numeric data.  The subpackages of this
     package are listed next. Note that although these are defined as
     subpackages in the RM, they are actually transparently implemented
     as child packages in GNAT, meaning that they are only loaded if
     needed.

`Ada.Text_IO.Decimal_IO'
     Provides input-output facilities for decimal fixed-point types

`Ada.Text_IO.Enumeration_IO'
     Provides input-output facilities for enumeration types.

`Ada.Text_IO.Fixed_IO'
     Provides input-output facilities for ordinary fixed-point types.

`Ada.Text_IO.Float_IO'
     Provides input-output facilities for float types.  The following
     predefined instantiations of this generic package are available:

        * `Short_Float'

          `Short_Float_Text_IO'

        * `Float'

          `Float_Text_IO'

        * `Long_Float'

          `Long_Float_Text_IO'

`Ada.Text_IO.Integer_IO'
     Provides input-output facilities for integer types.  The following
     predefined instantiations of this generic package are available:

        * `Short_Short_Integer'

          `Ada.Short_Short_Integer_Text_IO'

        * `Short_Integer'

          `Ada.Short_Integer_Text_IO'

        * `Integer'

          `Ada.Integer_Text_IO'

        * `Long_Integer'

          `Ada.Long_Integer_Text_IO'

        * `Long_Long_Integer'

          `Ada.Long_Long_Integer_Text_IO'

`Ada.Text_IO.Modular_IO'
     Provides input-output facilities for modular (unsigned) types.

`Ada.Text_IO.Bounded_IO (A.10.11)'
     Provides input-output facilities for bounded strings.

`Ada.Text_IO.Complex_IO (G.1.3)'
     This package provides basic text input-output capabilities for
     complex data.

`Ada.Text_IO.Editing (F.3.3)'
     This package contains routines for edited output, analogous to the
     use of pictures in COBOL.  The picture formats used by this
     package are a close copy of the facility in COBOL.

`Ada.Text_IO.Text_Streams (A.12.2)'
     This package provides a facility that allows Text_IO files to be
     treated as streams, so that the stream attributes can be used for
     writing arbitrary data, including binary data, to Text_IO files.

`Ada.Text_IO.Unbounded_IO (A.10.12)'
     This package provides input-output facilities for unbounded
     strings.

`Ada.Unchecked_Conversion (13.9)'
     This generic package allows arbitrary conversion from one type to
     another of the same size, providing for breaking the type safety in
     special circumstances.

     If the types have the same Size (more accurately the same
     Value_Size), then the effect is simply to transfer the bits from
     the source to the target type without any modification.  This
     usage is well defined, and for simple types whose representation
     is typically the same across all implementations, gives a portable
     method of performing such conversions.

     If the types do not have the same size, then the result is
     implementation defined, and thus may be non-portable.  The
     following describes how GNAT handles such unchecked conversion
     cases.

     If the types are of different sizes, and are both discrete types,
     then the effect is of a normal type conversion without any
     constraint checking.  In particular if the result type has a
     larger size, the result will be zero or sign extended.  If the
     result type has a smaller size, the result will be truncated by
     ignoring high order bits.

     If the types are of different sizes, and are not both discrete
     types, then the conversion works as though pointers were created
     to the source and target, and the pointer value is converted.  The
     effect is that bits are copied from successive low order storage
     units and bits of the source up to the length of the target type.

     A warning is issued if the lengths differ, since the effect in this
     case is implementation dependent, and the above behavior may not
     match that of some other compiler.

     A pointer to one type may be converted to a pointer to another
     type using unchecked conversion.  The only case in which the
     effect is undefined is when one or both pointers are pointers to
     unconstrained array types.  In this case, the bounds information
     may get incorrectly transferred, and in particular, GNAT uses
     double size pointers for such types, and it is meaningless to
     convert between such pointer types.  GNAT will issue a warning if
     the alignment of the target designated type is more strict than
     the alignment of the source designated type (since the result may
     be unaligned in this case).

     A pointer other than a pointer to an unconstrained array type may
     be converted to and from System.Address.  Such usage is common in
     Ada 83 programs, but note that Ada.Address_To_Access_Conversions
     is the preferred method of performing such conversions in Ada 95
     and Ada 2005.  Neither unchecked conversion nor
     Ada.Address_To_Access_Conversions should be used in conjunction
     with pointers to unconstrained objects, since the bounds
     information cannot be handled correctly in this case.

`Ada.Unchecked_Deallocation' `(13.11.2)'
     This generic package allows explicit freeing of storage previously
     allocated by use of an allocator.

`Ada.Wide_Text_IO' `(A.11)'
     This package is similar to `Ada.Text_IO', except that the external
     file supports wide character representations, and the internal
     types are `Wide_Character' and `Wide_String' instead of `Character'
     and `String'. The corresponding set of nested packages and child
     packages are defined.

`Ada.Wide_Wide_Text_IO' `(A.11)'
     This package is similar to `Ada.Text_IO', except that the external
     file supports wide character representations, and the internal
     types are `Wide_Character' and `Wide_String' instead of `Character'
     and `String'. The corresponding set of nested packages and child
     packages are defined.

For packages in Interfaces and System, all the RM defined packages are
available in GNAT, see the Ada 2012 RM for full details.


File: gnat_rm.info,  Node: The Implementation of Standard I/O,  Next: The GNAT Library,  Prev: Standard Library Routines,  Up: Top

11 The Implementation of Standard I/O
*************************************

GNAT implements all the required input-output facilities described in
A.6 through A.14.  These sections of the Ada Reference Manual describe
the required behavior of these packages from the Ada point of view, and
if you are writing a portable Ada program that does not need to know the
exact manner in which Ada maps to the outside world when it comes to
reading or writing external files, then you do not need to read this
chapter.  As long as your files are all regular files (not pipes or
devices), and as long as you write and read the files only from Ada, the
description in the Ada Reference Manual is sufficient.

However, if you want to do input-output to pipes or other devices, such
as the keyboard or screen, or if the files you are dealing with are
either generated by some other language, or to be read by some other
language, then you need to know more about the details of how the GNAT
implementation of these input-output facilities behaves.

In this chapter we give a detailed description of exactly how GNAT
interfaces to the file system.  As always, the sources of the system are
available to you for answering questions at an even more detailed level,
but for most purposes the information in this chapter will suffice.

Another reason that you may need to know more about how input-output is
implemented arises when you have a program written in mixed languages
where, for example, files are shared between the C and Ada sections of
the same program.  GNAT provides some additional facilities, in the form
of additional child library packages, that facilitate this sharing, and
these additional facilities are also described in this chapter.

* Menu:

* Standard I/O Packages::
* FORM Strings::
* Direct_IO::
* Sequential_IO::
* Text_IO::
* Wide_Text_IO::
* Wide_Wide_Text_IO::
* Stream_IO::
* Text Translation::
* Shared Files::
* Filenames encoding::
* File content encoding::
* Open Modes::
* Operations on C Streams::
* Interfacing to C Streams::


File: gnat_rm.info,  Node: Standard I/O Packages,  Next: FORM Strings,  Up: The Implementation of Standard I/O

11.1 Standard I/O Packages
==========================

The Standard I/O packages described in Annex A for

   * Ada.Text_IO

   * Ada.Text_IO.Complex_IO

   * Ada.Text_IO.Text_Streams

   * Ada.Wide_Text_IO

   * Ada.Wide_Text_IO.Complex_IO

   * Ada.Wide_Text_IO.Text_Streams

   * Ada.Wide_Wide_Text_IO

   * Ada.Wide_Wide_Text_IO.Complex_IO

   * Ada.Wide_Wide_Text_IO.Text_Streams

   * Ada.Stream_IO

   * Ada.Sequential_IO

   * Ada.Direct_IO

are implemented using the C library streams facility; where

   * All files are opened using `fopen'.

   * All input/output operations use `fread'/`fwrite'.

There is no internal buffering of any kind at the Ada library level.
The only buffering is that provided at the system level in the
implementation of the library routines that support streams. This
facilitates shared use of these streams by mixed language programs.
Note though that system level buffering is explicitly enabled at
elaboration of the standard I/O packages and that can have an impact on
mixed language programs, in particular those using I/O before calling
the Ada elaboration routine (e.g., adainit). It is recommended to call
the Ada elaboration routine before performing any I/O or when
impractical, flush the common I/O streams and in particular
Standard_Output before elaborating the Ada code.


File: gnat_rm.info,  Node: FORM Strings,  Next: Direct_IO,  Prev: Standard I/O Packages,  Up: The Implementation of Standard I/O

11.2 FORM Strings
=================

The format of a FORM string in GNAT is:

    "keyword=value,keyword=value,...,keyword=value"

where letters may be in upper or lower case, and there are no spaces
between values.  The order of the entries is not important.  Currently
the following keywords defined.

    TEXT_TRANSLATION=[YES|NO|TEXT|BINARY|U8TEXT|WTEXT|U16TEXT]
    SHARED=[YES|NO]
    WCEM=[n|h|u|s|e|8|b]
    ENCODING=[UTF8|8BITS]

The use of these parameters is described later in this section. If an
unrecognized keyword appears in a form string, it is silently ignored
and not considered invalid.


File: gnat_rm.info,  Node: Direct_IO,  Next: Sequential_IO,  Prev: FORM Strings,  Up: The Implementation of Standard I/O

11.3 Direct_IO
==============

Direct_IO can only be instantiated for definite types.  This is a
restriction of the Ada language, which means that the records are fixed
length (the length being determined by `type'Size', rounded up to the
next storage unit boundary if necessary).

The records of a Direct_IO file are simply written to the file in index
sequence, with the first record starting at offset zero, and subsequent
records following.  There is no control information of any kind.  For
example, if 32-bit integers are being written, each record takes
4-bytes, so the record at index `K' starts at offset (`K'-1)*4.

There is no limit on the size of Direct_IO files, they are expanded as
necessary to accommodate whatever records are written to the file.


File: gnat_rm.info,  Node: Sequential_IO,  Next: Text_IO,  Prev: Direct_IO,  Up: The Implementation of Standard I/O

11.4 Sequential_IO
==================

Sequential_IO may be instantiated with either a definite (constrained)
or indefinite (unconstrained) type.

For the definite type case, the elements written to the file are simply
the memory images of the data values with no control information of any
kind.  The resulting file should be read using the same type, no
validity checking is performed on input.

For the indefinite type case, the elements written consist of two
parts.  First is the size of the data item, written as the memory image
of a `Interfaces.C.size_t' value, followed by the memory image of the
data value.  The resulting file can only be read using the same
(unconstrained) type.  Normal assignment checks are performed on these
read operations, and if these checks fail, `Data_Error' is raised.  In
particular, in the array case, the lengths must match, and in the
variant record case, if the variable for a particular read operation is
constrained, the discriminants must match.

Note that it is not possible to use Sequential_IO to write variable
length array items, and then read the data back into different length
arrays.  For example, the following will raise `Data_Error':

    package IO is new Sequential_IO (String);
    F : IO.File_Type;
    S : String (1..4);
    ...
    IO.Create (F)
    IO.Write (F, "hello!")
    IO.Reset (F, Mode=>In_File);
    IO.Read (F, S);
    Put_Line (S);

On some Ada implementations, this will print `hell', but the program is
clearly incorrect, since there is only one element in the file, and that
element is the string `hello!'.

In Ada 95 and Ada 2005, this kind of behavior can be legitimately
achieved using Stream_IO, and this is the preferred mechanism.  In
particular, the above program fragment rewritten to use Stream_IO will
work correctly.


File: gnat_rm.info,  Node: Text_IO,  Next: Wide_Text_IO,  Prev: Sequential_IO,  Up: The Implementation of Standard I/O

11.5 Text_IO
============

Text_IO files consist of a stream of characters containing the following
special control characters:

    LF (line feed, 16#0A#) Line Mark
    FF (form feed, 16#0C#) Page Mark

A canonical Text_IO file is defined as one in which the following
conditions are met:

   * The character `LF' is used only as a line mark, i.e., to mark the
     end of the line.

   * The character `FF' is used only as a page mark, i.e., to mark the
     end of a page and consequently can appear only immediately
     following a `LF' (line mark) character.

   * The file ends with either `LF' (line mark) or `LF'-`FF' (line
     mark, page mark).  In the former case, the page mark is implicitly
     assumed to be present.

A file written using Text_IO will be in canonical form provided that no
explicit `LF' or `FF' characters are written using `Put' or `Put_Line'.
There will be no `FF' character at the end of the file unless an
explicit `New_Page' operation was performed before closing the file.

A canonical Text_IO file that is a regular file (i.e., not a device or a
pipe) can be read using any of the routines in Text_IO.  The semantics
in this case will be exactly as defined in the Ada Reference Manual,
and all the routines in Text_IO are fully implemented.

A text file that does not meet the requirements for a canonical Text_IO
file has one of the following:

   * The file contains `FF' characters not immediately following a `LF'
     character.

   * The file contains `LF' or `FF' characters written by `Put' or
     `Put_Line', which are not logically considered to be line marks or
     page marks.

   * The file ends in a character other than `LF' or `FF', i.e., there
     is no explicit line mark or page mark at the end of the file.

Text_IO can be used to read such non-standard text files but subprograms
to do with line or page numbers do not have defined meanings.  In
particular, a `FF' character that does not follow a `LF' character may
or may not be treated as a page mark from the point of view of page and
line numbering.  Every `LF' character is considered to end a line, and
there is an implied `LF' character at the end of the file.

* Menu:

* Stream Pointer Positioning::
* Reading and Writing Non-Regular Files::
* Get_Immediate::
* Treating Text_IO Files as Streams::
* Text_IO Extensions::
* Text_IO Facilities for Unbounded Strings::


File: gnat_rm.info,  Node: Stream Pointer Positioning,  Next: Reading and Writing Non-Regular Files,  Up: Text_IO

11.5.1 Stream Pointer Positioning
---------------------------------

`Ada.Text_IO' has a definition of current position for a file that is
being read.  No internal buffering occurs in Text_IO, and usually the
physical position in the stream used to implement the file corresponds
to this logical position defined by Text_IO.  There are two exceptions:

   * After a call to `End_Of_Page' that returns `True', the stream is
     positioned past the `LF' (line mark) that precedes the page mark.
     Text_IO maintains an internal flag so that subsequent read
     operations properly handle the logical position which is unchanged
     by the `End_Of_Page' call.

   * After a call to `End_Of_File' that returns `True', if the Text_IO
     file was positioned before the line mark at the end of file before
     the call, then the logical position is unchanged, but the stream
     is physically positioned right at the end of file (past the line
     mark, and past a possible page mark following the line mark.
     Again Text_IO maintains internal flags so that subsequent read
     operations properly handle the logical position.

These discrepancies have no effect on the observable behavior of
Text_IO, but if a single Ada stream is shared between a C program and
Ada program, or shared (using `shared=yes' in the form string) between
two Ada files, then the difference may be observable in some situations.


File: gnat_rm.info,  Node: Reading and Writing Non-Regular Files,  Next: Get_Immediate,  Prev: Stream Pointer Positioning,  Up: Text_IO

11.5.2 Reading and Writing Non-Regular Files
--------------------------------------------

A non-regular file is a device (such as a keyboard), or a pipe.  Text_IO
can be used for reading and writing.  Writing is not affected and the
sequence of characters output is identical to the normal file case, but
for reading, the behavior of Text_IO is modified to avoid undesirable
look-ahead as follows:

An input file that is not a regular file is considered to have no page
marks.  Any `Ascii.FF' characters (the character normally used for a
page mark) appearing in the file are considered to be data characters.
In particular:

   * `Get_Line' and `Skip_Line' do not test for a page mark following a
     line mark.  If a page mark appears, it will be treated as a data
     character.

   * This avoids the need to wait for an extra character to be typed or
     entered from the pipe to complete one of these operations.

   * `End_Of_Page' always returns `False'

   * `End_Of_File' will return `False' if there is a page mark at the
     end of the file.

Output to non-regular files is the same as for regular files.  Page
marks may be written to non-regular files using `New_Page', but as noted
above they will not be treated as page marks on input if the output is
piped to another Ada program.

Another important discrepancy when reading non-regular files is that
the end of file indication is not 'sticky'.  If an end of file is
entered, e.g., by pressing the `EOT' key, then end of file is signaled
once (i.e., the test `End_Of_File' will yield `True', or a read will
raise `End_Error'), but then reading can resume to read data past that
end of file indication, until another end of file indication is entered.


File: gnat_rm.info,  Node: Get_Immediate,  Next: Treating Text_IO Files as Streams,  Prev: Reading and Writing Non-Regular Files,  Up: Text_IO

11.5.3 Get_Immediate
--------------------

Get_Immediate returns the next character (including control characters)
from the input file.  In particular, Get_Immediate will return LF or FF
characters used as line marks or page marks.  Such operations leave the
file positioned past the control character, and it is thus not treated
as having its normal function.  This means that page, line and column
counts after this kind of Get_Immediate call are set as though the mark
did not occur.  In the case where a Get_Immediate leaves the file
positioned between the line mark and page mark (which is not normally
possible), it is undefined whether the FF character will be treated as a
page mark.


File: gnat_rm.info,  Node: Treating Text_IO Files as Streams,  Next: Text_IO Extensions,  Prev: Get_Immediate,  Up: Text_IO

11.5.4 Treating Text_IO Files as Streams
----------------------------------------

The package `Text_IO.Streams' allows a Text_IO file to be treated as a
stream.  Data written to a Text_IO file in this stream mode is binary
data.  If this binary data contains bytes 16#0A# (`LF') or 16#0C#
(`FF'), the resulting file may have non-standard format.  Similarly if
read operations are used to read from a Text_IO file treated as a
stream, then `LF' and `FF' characters may be skipped and the effect is
similar to that described above for `Get_Immediate'.


File: gnat_rm.info,  Node: Text_IO Extensions,  Next: Text_IO Facilities for Unbounded Strings,  Prev: Treating Text_IO Files as Streams,  Up: Text_IO

11.5.5 Text_IO Extensions
-------------------------

A package GNAT.IO_Aux in the GNAT library provides some useful
extensions to the standard `Text_IO' package:

   * function File_Exists (Name : String) return Boolean; Determines if
     a file of the given name exists.

   * function Get_Line return String; Reads a string from the standard
     input file.  The value returned is exactly the length of the line
     that was read.

   * function Get_Line (File : Ada.Text_IO.File_Type) return String;
     Similar, except that the parameter File specifies the file from
     which the string is to be read.


File: gnat_rm.info,  Node: Text_IO Facilities for Unbounded Strings,  Prev: Text_IO Extensions,  Up: Text_IO

11.5.6 Text_IO Facilities for Unbounded Strings
-----------------------------------------------

The package `Ada.Strings.Unbounded.Text_IO' in library files
`a-suteio.ads/adb' contains some GNAT-specific subprograms useful for
Text_IO operations on unbounded strings:

   * function Get_Line (File : File_Type) return Unbounded_String;
     Reads a line from the specified file and returns the result as an
     unbounded string.

   * procedure Put (File : File_Type; U : Unbounded_String); Writes the
     value of the given unbounded string to the specified file Similar
     to the effect of `Put (To_String (U))' except that an extra copy
     is avoided.

   * procedure Put_Line (File : File_Type; U : Unbounded_String);
     Writes the value of the given unbounded string to the specified
     file, followed by a `New_Line'.  Similar to the effect of
     `Put_Line (To_String (U))' except that an extra copy is avoided.

In the above procedures, `File' is of type `Ada.Text_IO.File_Type' and
is optional.  If the parameter is omitted, then the standard input or
output file is referenced as appropriate.

The package `Ada.Strings.Wide_Unbounded.Wide_Text_IO' in library files
`a-swuwti.ads' and `a-swuwti.adb' provides similar extended
`Wide_Text_IO' functionality for unbounded wide strings.

The package `Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO' in
library files `a-szuzti.ads' and `a-szuzti.adb' provides similar
extended `Wide_Wide_Text_IO' functionality for unbounded wide wide
strings.


File: gnat_rm.info,  Node: Wide_Text_IO,  Next: Wide_Wide_Text_IO,  Prev: Text_IO,  Up: The Implementation of Standard I/O

11.6 Wide_Text_IO
=================

`Wide_Text_IO' is similar in most respects to Text_IO, except that both
input and output files may contain special sequences that represent
wide character values.  The encoding scheme for a given file may be
specified using a FORM parameter:

    WCEM=`x`

as part of the FORM string (WCEM = wide character encoding method),
where `x' is one of the following characters

Character      Encoding
---------------------------------------- 
`h'            Hex ESC encoding
`u'            Upper half encoding
`s'            Shift-JIS encoding
`e'            EUC Encoding
`8'            UTF-8 encoding
`b'            Brackets encoding

The encoding methods match those that can be used in a source program,
but there is no requirement that the encoding method used for the
source program be the same as the encoding method used for files, and
different files may use different encoding methods.

The default encoding method for the standard files, and for opened files
for which no WCEM parameter is given in the FORM string matches the
wide character encoding specified for the main program (the default
being brackets encoding if no coding method was specified with -gnatW).

`Hex Coding'
     In this encoding, a wide character is represented by a five
     character sequence:

    ESC a b c d

     where `a', `b', `c', `d' are the four hexadecimal characters
     (using upper case letters) of the wide character code.  For
     example, ESC A345 is used to represent the wide character with code
     16#A345#.  This scheme is compatible with use of the full
     `Wide_Character' set.

`Upper Half Coding'
     The wide character with encoding 16#abcd#, where the upper bit is
     on (i.e., a is in the range 8-F) is represented as two bytes
     16#ab# and 16#cd#.  The second byte may never be a format control
     character, but is not required to be in the upper half.  This
     method can be also used for shift-JIS or EUC where the internal
     coding matches the external coding.

`Shift JIS Coding'
     A wide character is represented by a two character sequence 16#ab#
     and 16#cd#, with the restrictions described for upper half
     encoding as described above.  The internal character code is the
     corresponding JIS character according to the standard algorithm
     for Shift-JIS conversion.  Only characters defined in the JIS code
     set table can be used with this encoding method.

`EUC Coding'
     A wide character is represented by a two character sequence 16#ab#
     and 16#cd#, with both characters being in the upper half.  The
     internal character code is the corresponding JIS character
     according to the EUC encoding algorithm.  Only characters defined
     in the JIS code set table can be used with this encoding method.

`UTF-8 Coding'
     A wide character is represented using UCS Transformation Format 8
     (UTF-8) as defined in Annex R of ISO 10646-1/Am.2.  Depending on
     the character value, the representation is a one, two, or three
     byte sequence:

    16#0000#-16#007f#: 2#0xxxxxxx#
    16#0080#-16#07ff#: 2#110xxxxx# 2#10xxxxxx#
    16#0800#-16#ffff#: 2#1110xxxx# 2#10xxxxxx# 2#10xxxxxx#

     where the `xxx' bits correspond to the left-padded bits of the
     16-bit character value.  Note that all lower half ASCII characters
     are represented as ASCII bytes and all upper half characters and
     other wide characters are represented as sequences of upper-half
     (The full UTF-8 scheme allows for encoding 31-bit characters as
     6-byte sequences, but in this implementation, all UTF-8 sequences
     of four or more bytes length will raise a Constraint_Error, as
     will all invalid UTF-8 sequences.)

`Brackets Coding'
     In this encoding, a wide character is represented by the following
     eight character sequence:

    [ " a b c d " ]

     where `a', `b', `c', `d' are the four hexadecimal characters
     (using uppercase letters) of the wide character code.  For
     example, `["A345"]' is used to represent the wide character with
     code `16#A345#'.  This scheme is compatible with use of the full
     Wide_Character set.  On input, brackets coding can also be used
     for upper half characters, e.g., `["C1"]' for lower case a.
     However, on output, brackets notation is only used for wide
     characters with a code greater than `16#FF#'.

     Note that brackets coding is not normally used in the context of
     Wide_Text_IO or Wide_Wide_Text_IO, since it is really just
     designed as a portable way of encoding source files. In the
     context of Wide_Text_IO or Wide_Wide_Text_IO, it can only be used
     if the file does not contain any instance of the left bracket
     character other than to encode wide character values using the
     brackets encoding method. In practice it is expected that some
     standard wide character encoding method such as UTF-8 will be used
     for text input output.

     If brackets notation is used, then any occurrence of a left bracket
     in the input file which is not the start of a valid wide character
     sequence will cause Constraint_Error to be raised. It is possible
     to encode a left bracket as ["5B"] and Wide_Text_IO and
     Wide_Wide_Text_IO input will interpret this as a left bracket.

     However, when a left bracket is output, it will be output as a
     left bracket and not as ["5B"]. We make this decision because for
     normal use of Wide_Text_IO for outputting messages, it is
     unpleasant to clobber left brackets. For example, if we write:

         Put_Line ("Start of output [first run]");

     we really do not want to have the left bracket in this message
     clobbered so that the output reads:

    Start of output ["5B"]first run]

     In practice brackets encoding is reasonably useful for normal
     Put_Line use since we won't get confused between left brackets and
     wide character sequences in the output. But for input, or when
     files are written out and read back in, it really makes better
     sense to use one of the standard encoding methods such as UTF-8.

For the coding schemes other than UTF-8, Hex, or Brackets encoding, not
all wide character values can be represented.  An attempt to output a
character that cannot be represented using the encoding scheme for the
file causes Constraint_Error to be raised.  An invalid wide character
sequence on input also causes Constraint_Error to be raised.

* Menu:

* Stream Pointer Positioning: Stream Pointer Positioning<2>.
* Reading and Writing Non-Regular Files: Reading and Writing Non-Regular Files<2>.


File: gnat_rm.info,  Node: Stream Pointer Positioning<2>,  Next: Reading and Writing Non-Regular Files<2>,  Up: Wide_Text_IO

11.6.1 Stream Pointer Positioning
---------------------------------

`Ada.Wide_Text_IO' is similar to `Ada.Text_IO' in its handling of
stream pointer positioning (*Note Text_IO: 24d.).  There is one
additional case:

If `Ada.Wide_Text_IO.Look_Ahead' reads a character outside the normal
lower ASCII set (i.e., a character in the range:

    Wide_Character'Val (16#0080#) .. Wide_Character'Val (16#FFFF#)

then although the logical position of the file pointer is unchanged by
the `Look_Ahead' call, the stream is physically positioned past the
wide character sequence.  Again this is to avoid the need for buffering
or backup, and all `Wide_Text_IO' routines check the internal
indication that this situation has occurred so that this is not visible
to a normal program using `Wide_Text_IO'.  However, this discrepancy
can be observed if the wide text file shares a stream with another file.


File: gnat_rm.info,  Node: Reading and Writing Non-Regular Files<2>,  Prev: Stream Pointer Positioning<2>,  Up: Wide_Text_IO

11.6.2 Reading and Writing Non-Regular Files
--------------------------------------------

As in the case of Text_IO, when a non-regular file is read, it is
assumed that the file contains no page marks (any form characters are
treated as data characters), and `End_Of_Page' always returns `False'.
Similarly, the end of file indication is not sticky, so it is possible
to read beyond an end of file.


File: gnat_rm.info,  Node: Wide_Wide_Text_IO,  Next: Stream_IO,  Prev: Wide_Text_IO,  Up: The Implementation of Standard I/O

11.7 Wide_Wide_Text_IO
======================

`Wide_Wide_Text_IO' is similar in most respects to Text_IO, except that
both input and output files may contain special sequences that represent
wide wide character values.  The encoding scheme for a given file may be
specified using a FORM parameter:

    WCEM=`x`

as part of the FORM string (WCEM = wide character encoding method),
where `x' is one of the following characters

Character      Encoding
---------------------------------------- 
`h'            Hex ESC encoding
`u'            Upper half encoding
`s'            Shift-JIS encoding
`e'            EUC Encoding
`8'            UTF-8 encoding
`b'            Brackets encoding

The encoding methods match those that can be used in a source program,
but there is no requirement that the encoding method used for the
source program be the same as the encoding method used for files, and
different files may use different encoding methods.

The default encoding method for the standard files, and for opened files
for which no WCEM parameter is given in the FORM string matches the
wide character encoding specified for the main program (the default
being brackets encoding if no coding method was specified with -gnatW).

`UTF-8 Coding'
     A wide character is represented using UCS Transformation Format 8
     (UTF-8) as defined in Annex R of ISO 10646-1/Am.2.  Depending on
     the character value, the representation is a one, two, three, or
     four byte sequence:

    16#000000#-16#00007f#: 2#0xxxxxxx#
    16#000080#-16#0007ff#: 2#110xxxxx# 2#10xxxxxx#
    16#000800#-16#00ffff#: 2#1110xxxx# 2#10xxxxxx# 2#10xxxxxx#
    16#010000#-16#10ffff#: 2#11110xxx# 2#10xxxxxx# 2#10xxxxxx# 2#10xxxxxx#

     where the `xxx' bits correspond to the left-padded bits of the
     21-bit character value.  Note that all lower half ASCII characters
     are represented as ASCII bytes and all upper half characters and
     other wide characters are represented as sequences of upper-half
     characters.

`Brackets Coding'
     In this encoding, a wide wide character is represented by the
     following eight character sequence if is in wide character range

    [ " a b c d " ]

     and by the following ten character sequence if not

    [ " a b c d e f " ]

     where `a', `b', `c', `d', `e', and `f' are the four or six
     hexadecimal characters (using uppercase letters) of the wide wide
     character code.  For example, `["01A345"]' is used to represent
     the wide wide character with code `16#01A345#'.

     This scheme is compatible with use of the full Wide_Wide_Character
     set.  On input, brackets coding can also be used for upper half
     characters, e.g., `["C1"]' for lower case a.  However, on output,
     brackets notation is only used for wide characters with a code
     greater than `16#FF#'.

If is also possible to use the other Wide_Character encoding methods,
such as Shift-JIS, but the other schemes cannot support the full range
of wide wide characters.  An attempt to output a character that cannot
be represented using the encoding scheme for the file causes
Constraint_Error to be raised.  An invalid wide character sequence on
input also causes Constraint_Error to be raised.

* Menu:

* Stream Pointer Positioning: Stream Pointer Positioning<3>.
* Reading and Writing Non-Regular Files: Reading and Writing Non-Regular Files<3>.


File: gnat_rm.info,  Node: Stream Pointer Positioning<3>,  Next: Reading and Writing Non-Regular Files<3>,  Up: Wide_Wide_Text_IO

11.7.1 Stream Pointer Positioning
---------------------------------

`Ada.Wide_Wide_Text_IO' is similar to `Ada.Text_IO' in its handling of
stream pointer positioning (*Note Text_IO: 24d.).  There is one
additional case:

If `Ada.Wide_Wide_Text_IO.Look_Ahead' reads a character outside the
normal lower ASCII set (i.e., a character in the range:

    Wide_Wide_Character'Val (16#0080#) .. Wide_Wide_Character'Val (16#10FFFF#)

then although the logical position of the file pointer is unchanged by
the `Look_Ahead' call, the stream is physically positioned past the
wide character sequence.  Again this is to avoid the need for buffering
or backup, and all `Wide_Wide_Text_IO' routines check the internal
indication that this situation has occurred so that this is not visible
to a normal program using `Wide_Wide_Text_IO'.  However, this
discrepancy can be observed if the wide text file shares a stream with
another file.


File: gnat_rm.info,  Node: Reading and Writing Non-Regular Files<3>,  Prev: Stream Pointer Positioning<3>,  Up: Wide_Wide_Text_IO

11.7.2 Reading and Writing Non-Regular Files
--------------------------------------------

As in the case of Text_IO, when a non-regular file is read, it is
assumed that the file contains no page marks (any form characters are
treated as data characters), and `End_Of_Page' always returns `False'.
Similarly, the end of file indication is not sticky, so it is possible
to read beyond an end of file.


File: gnat_rm.info,  Node: Stream_IO,  Next: Text Translation,  Prev: Wide_Wide_Text_IO,  Up: The Implementation of Standard I/O

11.8 Stream_IO
==============

A stream file is a sequence of bytes, where individual elements are
written to the file as described in the Ada Reference Manual.  The type
`Stream_Element' is simply a byte.  There are two ways to read or write
a stream file.

   * The operations `Read' and `Write' directly read or write a
     sequence of stream elements with no control information.

   * The stream attributes applied to a stream file transfer data in the
     manner described for stream attributes.


File: gnat_rm.info,  Node: Text Translation,  Next: Shared Files,  Prev: Stream_IO,  Up: The Implementation of Standard I/O

11.9 Text Translation
=====================

`Text_Translation=xxx' may be used as the Form parameter passed to
Text_IO.Create and Text_IO.Open. `Text_Translation=xxx' has no effect
on Unix systems. Possible values are:

   * `Yes' or `Text' is the default, which means to translate LF
     to/from CR/LF on Windows systems.

     `No' disables this translation; i.e. it uses binary mode. For
     output files, `Text_Translation=No' may be used to create
     Unix-style files on Windows.

   * `wtext' translation enabled in Unicode mode.  (corresponds to
     _O_WTEXT).

   * `u8text' translation enabled in Unicode UTF-8 mode.  (corresponds
     to O_U8TEXT).

   * `u16text' translation enabled in Unicode UTF-16 mode. (corresponds
     to_O_U16TEXT).


File: gnat_rm.info,  Node: Shared Files,  Next: Filenames encoding,  Prev: Text Translation,  Up: The Implementation of Standard I/O

11.10 Shared Files
==================

Section A.14 of the Ada Reference Manual allows implementations to
provide a wide variety of behavior if an attempt is made to access the
same external file with two or more internal files.

To provide a full range of functionality, while at the same time
minimizing the problems of portability caused by this implementation
dependence, GNAT handles file sharing as follows:

   * In the absence of a `shared=xxx' form parameter, an attempt to
     open two or more files with the same full name is considered an
     error and is not supported.  The exception `Use_Error' will be
     raised.  Note that a file that is not explicitly closed by the
     program remains open until the program terminates.

   * If the form parameter `shared=no' appears in the form string, the
     file can be opened or created with its own separate stream
     identifier, regardless of whether other files sharing the same
     external file are opened.  The exact effect depends on how the C
     stream routines handle multiple accesses to the same external
     files using separate streams.

   * If the form parameter `shared=yes' appears in the form string for
     each of two or more files opened using the same full name, the same
     stream is shared between these files, and the semantics are as
     described in Ada Reference Manual, Section A.14.

When a program that opens multiple files with the same name is ported
from another Ada compiler to GNAT, the effect will be that `Use_Error'
is raised.

The documentation of the original compiler and the documentation of the
program should then be examined to determine if file sharing was
expected, and `shared=xxx' parameters added to `Open' and `Create'
calls as required.

When a program is ported from GNAT to some other Ada compiler, no
special attention is required unless the `shared=xxx' form parameter is
used in the program.  In this case, you must examine the documentation
of the new compiler to see if it supports the required file sharing
semantics, and form strings modified appropriately.  Of course it may
be the case that the program cannot be ported if the target compiler
does not support the required functionality.  The best approach in
writing portable code is to avoid file sharing (and hence the use of
the `shared=xxx' parameter in the form string) completely.

One common use of file sharing in Ada 83 is the use of instantiations of
Sequential_IO on the same file with different types, to achieve
heterogeneous input-output.  Although this approach will work in GNAT if
`shared=yes' is specified, it is preferable in Ada to use Stream_IO for
this purpose (using the stream attributes)


File: gnat_rm.info,  Node: Filenames encoding,  Next: File content encoding,  Prev: Shared Files,  Up: The Implementation of Standard I/O

11.11 Filenames encoding
========================

An encoding form parameter can be used to specify the filename encoding
`encoding=xxx'.

   * If the form parameter `encoding=utf8' appears in the form string,
     the filename must be encoded in UTF-8.

   * If the form parameter `encoding=8bits' appears in the form string,
     the filename must be a standard 8bits string.

In the absence of a `encoding=xxx' form parameter, the encoding is
controlled by the `GNAT_CODE_PAGE' environment variable. And if not set
`utf8' is assumed.

`CP_ACP'
     The current system Windows ANSI code page.

`CP_UTF8'
     UTF-8 encoding

This encoding form parameter is only supported on the Windows platform.
On the other Operating Systems the run-time is supporting UTF-8
natively.


File: gnat_rm.info,  Node: File content encoding,  Next: Open Modes,  Prev: Filenames encoding,  Up: The Implementation of Standard I/O

11.12 File content encoding
===========================

For text files it is possible to specify the encoding to use. This is
controlled by the by the `GNAT_CCS_ENCODING' environment variable. And
if not set `TEXT' is assumed.

The possible values are those supported on Windows:

`TEXT'
     Translated text mode

`WTEXT'
     Translated unicode encoding

`U16TEXT'
     Unicode 16-bit encoding

`U8TEXT'
     Unicode 8-bit encoding

This encoding is only supported on the Windows platform.


File: gnat_rm.info,  Node: Open Modes,  Next: Operations on C Streams,  Prev: File content encoding,  Up: The Implementation of Standard I/O

11.13 Open Modes
================

`Open' and `Create' calls result in a call to `fopen' using the mode
shown in the following table:

`Open' and `Create' Call Modes                       
---------------------------------------------------------------------------- 
                                 `OPEN'              `CREATE'
Append_File                      "r+"                "w+"
In_File                          "r"                 "w+"
Out_File (Direct_IO)             "r+"                "w"
Out_File (all other cases)       "w"                 "w"
Inout_File                       "r+"                "w+"

If text file translation is required, then either `b' or `t' is added
to the mode, depending on the setting of Text.  Text file translation
refers to the mapping of CR/LF sequences in an external file to LF
characters internally.  This mapping only occurs in DOS and DOS-like
systems, and is not relevant to other systems.

A special case occurs with Stream_IO.  As shown in the above table, the
file is initially opened in `r' or `w' mode for the `In_File' and
`Out_File' cases.  If a `Set_Mode' operation subsequently requires
switching from reading to writing or vice-versa, then the file is
reopened in `r+' mode to permit the required operation.


File: gnat_rm.info,  Node: Operations on C Streams,  Next: Interfacing to C Streams,  Prev: Open Modes,  Up: The Implementation of Standard I/O

11.14 Operations on C Streams
=============================

The package `Interfaces.C_Streams' provides an Ada program with direct
access to the C library functions for operations on C streams:

    package Interfaces.C_Streams is
      -- Note: the reason we do not use the types that are in
      -- Interfaces.C is that we want to avoid dragging in the
      -- code in this unit if possible.
      subtype chars is System.Address;
      -- Pointer to null-terminated array of characters
      subtype FILEs is System.Address;
      -- Corresponds to the C type FILE*
      subtype voids is System.Address;
      -- Corresponds to the C type void*
      subtype int is Integer;
      subtype long is Long_Integer;
      -- Note: the above types are subtypes deliberately, and it
      -- is part of this spec that the above correspondences are
      -- guaranteed.  This means that it is legitimate to, for
      -- example, use Integer instead of int.  We provide these
      -- synonyms for clarity, but in some cases it may be
      -- convenient to use the underlying types (for example to
      -- avoid an unnecessary dependency of a spec on the spec
      -- of this unit).
      type size_t is mod 2 ** Standard'Address_Size;
      NULL_Stream : constant FILEs;
      -- Value returned (NULL in C) to indicate an
      -- fdopen/fopen/tmpfile error
      ----------------------------------
      -- Constants Defined in stdio.h --
      ----------------------------------
      EOF : constant int;
      -- Used by a number of routines to indicate error or
      -- end of file
      IOFBF : constant int;
      IOLBF : constant int;
      IONBF : constant int;
      -- Used to indicate buffering mode for setvbuf call
      SEEK_CUR : constant int;
      SEEK_END : constant int;
      SEEK_SET : constant int;
      -- Used to indicate origin for fseek call
      function stdin return FILEs;
      function stdout return FILEs;
      function stderr return FILEs;
      -- Streams associated with standard files
      --------------------------
      -- Standard C functions --
      --------------------------
      -- The functions selected below are ones that are
      -- available in UNIX (but not necessarily in ANSI C).
      -- These are very thin interfaces
      -- which copy exactly the C headers.  For more
      -- documentation on these functions, see the Microsoft C
      -- "Run-Time Library Reference" (Microsoft Press, 1990,
      -- ISBN 1-55615-225-6), which includes useful information
      -- on system compatibility.
      procedure clearerr (stream : FILEs);
      function fclose (stream : FILEs) return int;
      function fdopen (handle : int; mode : chars) return FILEs;
      function feof (stream : FILEs) return int;
      function ferror (stream : FILEs) return int;
      function fflush (stream : FILEs) return int;
      function fgetc (stream : FILEs) return int;
      function fgets (strng : chars; n : int; stream : FILEs)
          return chars;
      function fileno (stream : FILEs) return int;
      function fopen (filename : chars; Mode : chars)
          return FILEs;
      -- Note: to maintain target independence, use
      -- text_translation_required, a boolean variable defined in
      -- a-sysdep.c to deal with the target dependent text
      -- translation requirement.  If this variable is set,
      -- then  b/t should be appended to the standard mode
      -- argument to set the text translation mode off or on
      -- as required.
      function fputc (C : int; stream : FILEs) return int;
      function fputs (Strng : chars; Stream : FILEs) return int;
      function fread
         (buffer : voids;
          size : size_t;
          count : size_t;
          stream : FILEs)
          return size_t;
      function freopen
         (filename : chars;
          mode : chars;
          stream : FILEs)
          return FILEs;
      function fseek
         (stream : FILEs;
          offset : long;
          origin : int)
          return int;
      function ftell (stream : FILEs) return long;
      function fwrite
         (buffer : voids;
          size : size_t;
          count : size_t;
          stream : FILEs)
          return size_t;
      function isatty (handle : int) return int;
      procedure mktemp (template : chars);
      -- The return value (which is just a pointer to template)
      -- is discarded
      procedure rewind (stream : FILEs);
      function rmtmp return int;
      function setvbuf
         (stream : FILEs;
          buffer : chars;
          mode : int;
          size : size_t)
          return int;

      function tmpfile return FILEs;
      function ungetc (c : int; stream : FILEs) return int;
      function unlink (filename : chars) return int;
      ---------------------
      -- Extra functions --
      ---------------------
      -- These functions supply slightly thicker bindings than
      -- those above.  They are derived from functions in the
      -- C Run-Time Library, but may do a bit more work than
      -- just directly calling one of the Library functions.
      function is_regular_file (handle : int) return int;
      -- Tests if given handle is for a regular file (result 1)
      -- or for a non-regular file (pipe or device, result 0).
      ---------------------------------
      -- Control of Text/Binary Mode --
      ---------------------------------
      -- If text_translation_required is true, then the following
      -- functions may be used to dynamically switch a file from
      -- binary to text mode or vice versa.  These functions have
      -- no effect if text_translation_required is false (i.e., in
      -- normal UNIX mode).  Use fileno to get a stream handle.
      procedure set_binary_mode (handle : int);
      procedure set_text_mode (handle : int);
      ----------------------------
      -- Full Path Name support --
      ----------------------------
      procedure full_name (nam : chars; buffer : chars);
      -- Given a NUL terminated string representing a file
      -- name, returns in buffer a NUL terminated string
      -- representing the full path name for the file name.
      -- On systems where it is relevant the   drive is also
      -- part of the full path name.  It is the responsibility
      -- of the caller to pass an actual parameter for buffer
      -- that is big enough for any full path name.  Use
      -- max_path_len given below as the size of buffer.
      max_path_len : integer;
      -- Maximum length of an allowable full path name on the
      -- system, including a terminating NUL character.
    end Interfaces.C_Streams;


File: gnat_rm.info,  Node: Interfacing to C Streams,  Prev: Operations on C Streams,  Up: The Implementation of Standard I/O

11.15 Interfacing to C Streams
==============================

The packages in this section permit interfacing Ada files to C Stream
operations.

    with Interfaces.C_Streams;
    package Ada.Sequential_IO.C_Streams is
       function C_Stream (F : File_Type)
          return Interfaces.C_Streams.FILEs;
       procedure Open
         (File : in out File_Type;
          Mode : in File_Mode;
          C_Stream : in Interfaces.C_Streams.FILEs;
          Form : in String := "");
    end Ada.Sequential_IO.C_Streams;

     with Interfaces.C_Streams;
     package Ada.Direct_IO.C_Streams is
        function C_Stream (F : File_Type)
           return Interfaces.C_Streams.FILEs;
        procedure Open
          (File : in out File_Type;
           Mode : in File_Mode;
           C_Stream : in Interfaces.C_Streams.FILEs;
           Form : in String := "");
     end Ada.Direct_IO.C_Streams;

     with Interfaces.C_Streams;
     package Ada.Text_IO.C_Streams is
        function C_Stream (F : File_Type)
           return Interfaces.C_Streams.FILEs;
        procedure Open
          (File : in out File_Type;
           Mode : in File_Mode;
           C_Stream : in Interfaces.C_Streams.FILEs;
           Form : in String := "");
     end Ada.Text_IO.C_Streams;

     with Interfaces.C_Streams;
     package Ada.Wide_Text_IO.C_Streams is
        function C_Stream (F : File_Type)
           return Interfaces.C_Streams.FILEs;
        procedure Open
          (File : in out File_Type;
           Mode : in File_Mode;
           C_Stream : in Interfaces.C_Streams.FILEs;
           Form : in String := "");
    end Ada.Wide_Text_IO.C_Streams;

     with Interfaces.C_Streams;
     package Ada.Wide_Wide_Text_IO.C_Streams is
        function C_Stream (F : File_Type)
           return Interfaces.C_Streams.FILEs;
        procedure Open
          (File : in out File_Type;
           Mode : in File_Mode;
           C_Stream : in Interfaces.C_Streams.FILEs;
           Form : in String := "");
    end Ada.Wide_Wide_Text_IO.C_Streams;

    with Interfaces.C_Streams;
    package Ada.Stream_IO.C_Streams is
       function C_Stream (F : File_Type)
          return Interfaces.C_Streams.FILEs;
       procedure Open
         (File : in out File_Type;
          Mode : in File_Mode;
          C_Stream : in Interfaces.C_Streams.FILEs;
          Form : in String := "");
    end Ada.Stream_IO.C_Streams;

In each of these six packages, the `C_Stream' function obtains the
`FILE' pointer from a currently opened Ada file.  It is then possible
to use the `Interfaces.C_Streams' package to operate on this stream, or
the stream can be passed to a C program which can operate on it
directly.  Of course the program is responsible for ensuring that only
appropriate sequences of operations are executed.

One particular use of relevance to an Ada program is that the `setvbuf'
function can be used to control the buffering of the stream used by an
Ada file.  In the absence of such a call the standard default buffering
is used.

The `Open' procedures in these packages open a file giving an existing
C Stream instead of a file name.  Typically this stream is imported
from a C program, allowing an Ada file to operate on an existing C file.


File: gnat_rm.info,  Node: The GNAT Library,  Next: Interfacing to Other Languages,  Prev: The Implementation of Standard I/O,  Up: Top

12 The GNAT Library
*******************

The GNAT library contains a number of general and special purpose
packages.  It represents functionality that the GNAT developers have
found useful, and which is made available to GNAT users.  The packages
described here are fully supported, and upwards compatibility will be
maintained in future releases, so you can use these facilities with the
confidence that the same functionality will be available in future
releases.

The chapter here simply gives a brief summary of the facilities
available.  The full documentation is found in the spec file for the
package.  The full sources of these library packages, including both
spec and body, are provided with all GNAT releases.  For example, to
find out the full specifications of the SPITBOL pattern matching
capability, including a full tutorial and extensive examples, look in
the `g-spipat.ads' file in the library.

For each entry here, the package name (as it would appear in a `with'
clause) is given, followed by the name of the corresponding spec file in
parentheses.  The packages are children in four hierarchies, `Ada',
`Interfaces', `System', and `GNAT', the latter being a GNAT-specific
hierarchy.

Note that an application program should only use packages in one of
these four hierarchies if the package is defined in the Ada Reference
Manual, or is listed in this section of the GNAT Programmers Reference
Manual.  All other units should be considered internal implementation
units and should not be directly `with''ed by application code.  The
use of a `with' statement that references one of these internal
implementation units makes an application potentially dependent on
changes in versions of GNAT, and will generate a warning message.

* Menu:

* Ada.Characters.Latin_9 (a-chlat9.ads): Ada Characters Latin_9 a-chlat9 ads.
* Ada.Characters.Wide_Latin_1 (a-cwila1.ads): Ada Characters Wide_Latin_1 a-cwila1 ads.
* Ada.Characters.Wide_Latin_9 (a-cwila1.ads): Ada Characters Wide_Latin_9 a-cwila1 ads.
* Ada.Characters.Wide_Wide_Latin_1 (a-chzla1.ads): Ada Characters Wide_Wide_Latin_1 a-chzla1 ads.
* Ada.Characters.Wide_Wide_Latin_9 (a-chzla9.ads): Ada Characters Wide_Wide_Latin_9 a-chzla9 ads.
* Ada.Containers.Formal_Doubly_Linked_Lists (a-cfdlli.ads): Ada Containers Formal_Doubly_Linked_Lists a-cfdlli ads.
* Ada.Containers.Formal_Hashed_Maps (a-cfhama.ads): Ada Containers Formal_Hashed_Maps a-cfhama ads.
* Ada.Containers.Formal_Hashed_Sets (a-cfhase.ads): Ada Containers Formal_Hashed_Sets a-cfhase ads.
* Ada.Containers.Formal_Ordered_Maps (a-cforma.ads): Ada Containers Formal_Ordered_Maps a-cforma ads.
* Ada.Containers.Formal_Ordered_Sets (a-cforse.ads): Ada Containers Formal_Ordered_Sets a-cforse ads.
* Ada.Containers.Formal_Vectors (a-cofove.ads): Ada Containers Formal_Vectors a-cofove ads.
* Ada.Containers.Formal_Indefinite_Vectors (a-cfinve.ads): Ada Containers Formal_Indefinite_Vectors a-cfinve ads.
* Ada.Containers.Bounded_Holders (a-coboho.ads): Ada Containers Bounded_Holders a-coboho ads.
* Ada.Command_Line.Environment (a-colien.ads): Ada Command_Line Environment a-colien ads.
* Ada.Command_Line.Remove (a-colire.ads): Ada Command_Line Remove a-colire ads.
* Ada.Command_Line.Response_File (a-clrefi.ads): Ada Command_Line Response_File a-clrefi ads.
* Ada.Direct_IO.C_Streams (a-diocst.ads): Ada Direct_IO C_Streams a-diocst ads.
* Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads): Ada Exceptions Is_Null_Occurrence a-einuoc ads.
* Ada.Exceptions.Last_Chance_Handler (a-elchha.ads): Ada Exceptions Last_Chance_Handler a-elchha ads.
* Ada.Exceptions.Traceback (a-exctra.ads): Ada Exceptions Traceback a-exctra ads.
* Ada.Sequential_IO.C_Streams (a-siocst.ads): Ada Sequential_IO C_Streams a-siocst ads.
* Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads): Ada Streams Stream_IO C_Streams a-ssicst ads.
* Ada.Strings.Unbounded.Text_IO (a-suteio.ads): Ada Strings Unbounded Text_IO a-suteio ads.
* Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads): Ada Strings Wide_Unbounded Wide_Text_IO a-swuwti ads.
* Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads): Ada Strings Wide_Wide_Unbounded Wide_Wide_Text_IO a-szuzti ads.
* Ada.Text_IO.C_Streams (a-tiocst.ads): Ada Text_IO C_Streams a-tiocst ads.
* Ada.Text_IO.Reset_Standard_Files (a-tirsfi.ads): Ada Text_IO Reset_Standard_Files a-tirsfi ads.
* Ada.Wide_Characters.Unicode (a-wichun.ads): Ada Wide_Characters Unicode a-wichun ads.
* Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads): Ada Wide_Text_IO C_Streams a-wtcstr ads.
* Ada.Wide_Text_IO.Reset_Standard_Files (a-wrstfi.ads): Ada Wide_Text_IO Reset_Standard_Files a-wrstfi ads.
* Ada.Wide_Wide_Characters.Unicode (a-zchuni.ads): Ada Wide_Wide_Characters Unicode a-zchuni ads.
* Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads): Ada Wide_Wide_Text_IO C_Streams a-ztcstr ads.
* Ada.Wide_Wide_Text_IO.Reset_Standard_Files (a-zrstfi.ads): Ada Wide_Wide_Text_IO Reset_Standard_Files a-zrstfi ads.
* GNAT.Altivec (g-altive.ads): GNAT Altivec g-altive ads.
* GNAT.Altivec.Conversions (g-altcon.ads): GNAT Altivec Conversions g-altcon ads.
* GNAT.Altivec.Vector_Operations (g-alveop.ads): GNAT Altivec Vector_Operations g-alveop ads.
* GNAT.Altivec.Vector_Types (g-alvety.ads): GNAT Altivec Vector_Types g-alvety ads.
* GNAT.Altivec.Vector_Views (g-alvevi.ads): GNAT Altivec Vector_Views g-alvevi ads.
* GNAT.Array_Split (g-arrspl.ads): GNAT Array_Split g-arrspl ads.
* GNAT.AWK (g-awk.ads): GNAT AWK g-awk ads.
* GNAT.Bounded_Buffers (g-boubuf.ads): GNAT Bounded_Buffers g-boubuf ads.
* GNAT.Bounded_Mailboxes (g-boumai.ads): GNAT Bounded_Mailboxes g-boumai ads.
* GNAT.Bubble_Sort (g-bubsor.ads): GNAT Bubble_Sort g-bubsor ads.
* GNAT.Bubble_Sort_A (g-busora.ads): GNAT Bubble_Sort_A g-busora ads.
* GNAT.Bubble_Sort_G (g-busorg.ads): GNAT Bubble_Sort_G g-busorg ads.
* GNAT.Byte_Order_Mark (g-byorma.ads): GNAT Byte_Order_Mark g-byorma ads.
* GNAT.Byte_Swapping (g-bytswa.ads): GNAT Byte_Swapping g-bytswa ads.
* GNAT.Calendar (g-calend.ads): GNAT Calendar g-calend ads.
* GNAT.Calendar.Time_IO (g-catiio.ads): GNAT Calendar Time_IO g-catiio ads.
* GNAT.CRC32 (g-crc32.ads): GNAT CRC32 g-crc32 ads.
* GNAT.Case_Util (g-casuti.ads): GNAT Case_Util g-casuti ads.
* GNAT.CGI (g-cgi.ads): GNAT CGI g-cgi ads.
* GNAT.CGI.Cookie (g-cgicoo.ads): GNAT CGI Cookie g-cgicoo ads.
* GNAT.CGI.Debug (g-cgideb.ads): GNAT CGI Debug g-cgideb ads.
* GNAT.Command_Line (g-comlin.ads): GNAT Command_Line g-comlin ads.
* GNAT.Compiler_Version (g-comver.ads): GNAT Compiler_Version g-comver ads.
* GNAT.Ctrl_C (g-ctrl_c.ads): GNAT Ctrl_C g-ctrl_c ads.
* GNAT.Current_Exception (g-curexc.ads): GNAT Current_Exception g-curexc ads.
* GNAT.Debug_Pools (g-debpoo.ads): GNAT Debug_Pools g-debpoo ads.
* GNAT.Debug_Utilities (g-debuti.ads): GNAT Debug_Utilities g-debuti ads.
* GNAT.Decode_String (g-decstr.ads): GNAT Decode_String g-decstr ads.
* GNAT.Decode_UTF8_String (g-deutst.ads): GNAT Decode_UTF8_String g-deutst ads.
* GNAT.Directory_Operations (g-dirope.ads): GNAT Directory_Operations g-dirope ads.
* GNAT.Directory_Operations.Iteration (g-diopit.ads): GNAT Directory_Operations Iteration g-diopit ads.
* GNAT.Dynamic_HTables (g-dynhta.ads): GNAT Dynamic_HTables g-dynhta ads.
* GNAT.Dynamic_Tables (g-dyntab.ads): GNAT Dynamic_Tables g-dyntab ads.
* GNAT.Encode_String (g-encstr.ads): GNAT Encode_String g-encstr ads.
* GNAT.Encode_UTF8_String (g-enutst.ads): GNAT Encode_UTF8_String g-enutst ads.
* GNAT.Exception_Actions (g-excact.ads): GNAT Exception_Actions g-excact ads.
* GNAT.Exception_Traces (g-exctra.ads): GNAT Exception_Traces g-exctra ads.
* GNAT.Exceptions (g-expect.ads): GNAT Exceptions g-expect ads.
* GNAT.Expect (g-expect.ads): GNAT Expect g-expect ads.
* GNAT.Expect.TTY (g-exptty.ads): GNAT Expect TTY g-exptty ads.
* GNAT.Float_Control (g-flocon.ads): GNAT Float_Control g-flocon ads.
* GNAT.Formatted_String (g-forstr.ads): GNAT Formatted_String g-forstr ads.
* GNAT.Heap_Sort (g-heasor.ads): GNAT Heap_Sort g-heasor ads.
* GNAT.Heap_Sort_A (g-hesora.ads): GNAT Heap_Sort_A g-hesora ads.
* GNAT.Heap_Sort_G (g-hesorg.ads): GNAT Heap_Sort_G g-hesorg ads.
* GNAT.HTable (g-htable.ads): GNAT HTable g-htable ads.
* GNAT.IO (g-io.ads): GNAT IO g-io ads.
* GNAT.IO_Aux (g-io_aux.ads): GNAT IO_Aux g-io_aux ads.
* GNAT.Lock_Files (g-locfil.ads): GNAT Lock_Files g-locfil ads.
* GNAT.MBBS_Discrete_Random (g-mbdira.ads): GNAT MBBS_Discrete_Random g-mbdira ads.
* GNAT.MBBS_Float_Random (g-mbflra.ads): GNAT MBBS_Float_Random g-mbflra ads.
* GNAT.MD5 (g-md5.ads): GNAT MD5 g-md5 ads.
* GNAT.Memory_Dump (g-memdum.ads): GNAT Memory_Dump g-memdum ads.
* GNAT.Most_Recent_Exception (g-moreex.ads): GNAT Most_Recent_Exception g-moreex ads.
* GNAT.OS_Lib (g-os_lib.ads): GNAT OS_Lib g-os_lib ads.
* GNAT.Perfect_Hash_Generators (g-pehage.ads): GNAT Perfect_Hash_Generators g-pehage ads.
* GNAT.Random_Numbers (g-rannum.ads): GNAT Random_Numbers g-rannum ads.
* GNAT.Regexp (g-regexp.ads): GNAT Regexp g-regexp ads.
* GNAT.Registry (g-regist.ads): GNAT Registry g-regist ads.
* GNAT.Regpat (g-regpat.ads): GNAT Regpat g-regpat ads.
* GNAT.Rewrite_Data (g-rewdat.ads): GNAT Rewrite_Data g-rewdat ads.
* GNAT.Secondary_Stack_Info (g-sestin.ads): GNAT Secondary_Stack_Info g-sestin ads.
* GNAT.Semaphores (g-semaph.ads): GNAT Semaphores g-semaph ads.
* GNAT.Serial_Communications (g-sercom.ads): GNAT Serial_Communications g-sercom ads.
* GNAT.SHA1 (g-sha1.ads): GNAT SHA1 g-sha1 ads.
* GNAT.SHA224 (g-sha224.ads): GNAT SHA224 g-sha224 ads.
* GNAT.SHA256 (g-sha256.ads): GNAT SHA256 g-sha256 ads.
* GNAT.SHA384 (g-sha384.ads): GNAT SHA384 g-sha384 ads.
* GNAT.SHA512 (g-sha512.ads): GNAT SHA512 g-sha512 ads.
* GNAT.Signals (g-signal.ads): GNAT Signals g-signal ads.
* GNAT.Sockets (g-socket.ads): GNAT Sockets g-socket ads.
* GNAT.Source_Info (g-souinf.ads): GNAT Source_Info g-souinf ads.
* GNAT.Spelling_Checker (g-speche.ads): GNAT Spelling_Checker g-speche ads.
* GNAT.Spelling_Checker_Generic (g-spchge.ads): GNAT Spelling_Checker_Generic g-spchge ads.
* GNAT.Spitbol.Patterns (g-spipat.ads): GNAT Spitbol Patterns g-spipat ads.
* GNAT.Spitbol (g-spitbo.ads): GNAT Spitbol g-spitbo ads.
* GNAT.Spitbol.Table_Boolean (g-sptabo.ads): GNAT Spitbol Table_Boolean g-sptabo ads.
* GNAT.Spitbol.Table_Integer (g-sptain.ads): GNAT Spitbol Table_Integer g-sptain ads.
* GNAT.Spitbol.Table_VString (g-sptavs.ads): GNAT Spitbol Table_VString g-sptavs ads.
* GNAT.SSE (g-sse.ads): GNAT SSE g-sse ads.
* GNAT.SSE.Vector_Types (g-ssvety.ads): GNAT SSE Vector_Types g-ssvety ads.
* GNAT.Strings (g-string.ads): GNAT Strings g-string ads.
* GNAT.String_Split (g-strspl.ads): GNAT String_Split g-strspl ads.
* GNAT.Table (g-table.ads): GNAT Table g-table ads.
* GNAT.Task_Lock (g-tasloc.ads): GNAT Task_Lock g-tasloc ads.
* GNAT.Time_Stamp (g-timsta.ads): GNAT Time_Stamp g-timsta ads.
* GNAT.Threads (g-thread.ads): GNAT Threads g-thread ads.
* GNAT.Traceback (g-traceb.ads): GNAT Traceback g-traceb ads.
* GNAT.Traceback.Symbolic (g-trasym.ads): GNAT Traceback Symbolic g-trasym ads.
* GNAT.UTF_32 (g-table.ads): GNAT UTF_32 g-table ads.
* GNAT.Wide_Spelling_Checker (g-u3spch.ads): GNAT Wide_Spelling_Checker g-u3spch ads.
* GNAT.Wide_Spelling_Checker (g-wispch.ads): GNAT Wide_Spelling_Checker g-wispch ads.
* GNAT.Wide_String_Split (g-wistsp.ads): GNAT Wide_String_Split g-wistsp ads.
* GNAT.Wide_Wide_Spelling_Checker (g-zspche.ads): GNAT Wide_Wide_Spelling_Checker g-zspche ads.
* GNAT.Wide_Wide_String_Split (g-zistsp.ads): GNAT Wide_Wide_String_Split g-zistsp ads.
* Interfaces.C.Extensions (i-cexten.ads): Interfaces C Extensions i-cexten ads.
* Interfaces.C.Streams (i-cstrea.ads): Interfaces C Streams i-cstrea ads.
* Interfaces.Packed_Decimal (i-pacdec.ads): Interfaces Packed_Decimal i-pacdec ads.
* Interfaces.VxWorks (i-vxwork.ads): Interfaces VxWorks i-vxwork ads.
* Interfaces.VxWorks.IO (i-vxwoio.ads): Interfaces VxWorks IO i-vxwoio ads.
* System.Address_Image (s-addima.ads): System Address_Image s-addima ads.
* System.Assertions (s-assert.ads): System Assertions s-assert ads.
* System.Atomic_Counters (s-atocou.ads): System Atomic_Counters s-atocou ads.
* System.Memory (s-memory.ads): System Memory s-memory ads.
* System.Multiprocessors (s-multip.ads): System Multiprocessors s-multip ads.
* System.Multiprocessors.Dispatching_Domains (s-mudido.ads): System Multiprocessors Dispatching_Domains s-mudido ads.
* System.Partition_Interface (s-parint.ads): System Partition_Interface s-parint ads.
* System.Pool_Global (s-pooglo.ads): System Pool_Global s-pooglo ads.
* System.Pool_Local (s-pooloc.ads): System Pool_Local s-pooloc ads.
* System.Restrictions (s-restri.ads): System Restrictions s-restri ads.
* System.Rident (s-rident.ads): System Rident s-rident ads.
* System.Strings.Stream_Ops (s-ststop.ads): System Strings Stream_Ops s-ststop ads.
* System.Unsigned_Types (s-unstyp.ads): System Unsigned_Types s-unstyp ads.
* System.Wch_Cnv (s-wchcnv.ads): System Wch_Cnv s-wchcnv ads.
* System.Wch_Con (s-wchcon.ads): System Wch_Con s-wchcon ads.


File: gnat_rm.info,  Node: Ada Characters Latin_9 a-chlat9 ads,  Next: Ada Characters Wide_Latin_1 a-cwila1 ads,  Up: The GNAT Library

12.1 `Ada.Characters.Latin_9' (`a-chlat9.ads')
==============================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the RM-defined package
`Ada.Characters.Latin_1' but with the few modifications required for
`Latin-9' The provision of such a package is specifically authorized by
the Ada Reference Manual (RM A.3.3(27)).


File: gnat_rm.info,  Node: Ada Characters Wide_Latin_1 a-cwila1 ads,  Next: Ada Characters Wide_Latin_9 a-cwila1 ads,  Prev: Ada Characters Latin_9 a-chlat9 ads,  Up: The GNAT Library

12.2 `Ada.Characters.Wide_Latin_1' (`a-cwila1.ads')
===================================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the RM-defined package
`Ada.Characters.Latin_1' but with the types of the constants being
`Wide_Character' instead of `Character'.  The provision of such a
package is specifically authorized by the Ada Reference Manual (RM
A.3.3(27)).


File: gnat_rm.info,  Node: Ada Characters Wide_Latin_9 a-cwila1 ads,  Next: Ada Characters Wide_Wide_Latin_1 a-chzla1 ads,  Prev: Ada Characters Wide_Latin_1 a-cwila1 ads,  Up: The GNAT Library

12.3 `Ada.Characters.Wide_Latin_9' (`a-cwila1.ads')
===================================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the GNAT defined package
`Ada.Characters.Latin_9' but with the types of the constants being
`Wide_Character' instead of `Character'.  The provision of such a
package is specifically authorized by the Ada Reference Manual (RM
A.3.3(27)).


File: gnat_rm.info,  Node: Ada Characters Wide_Wide_Latin_1 a-chzla1 ads,  Next: Ada Characters Wide_Wide_Latin_9 a-chzla9 ads,  Prev: Ada Characters Wide_Latin_9 a-cwila1 ads,  Up: The GNAT Library

12.4 `Ada.Characters.Wide_Wide_Latin_1' (`a-chzla1.ads')
========================================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the RM-defined package
`Ada.Characters.Latin_1' but with the types of the constants being
`Wide_Wide_Character' instead of `Character'.  The provision of such a
package is specifically authorized by the Ada Reference Manual (RM
A.3.3(27)).


File: gnat_rm.info,  Node: Ada Characters Wide_Wide_Latin_9 a-chzla9 ads,  Next: Ada Containers Formal_Doubly_Linked_Lists a-cfdlli ads,  Prev: Ada Characters Wide_Wide_Latin_1 a-chzla1 ads,  Up: The GNAT Library

12.5 `Ada.Characters.Wide_Wide_Latin_9' (`a-chzla9.ads')
========================================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the GNAT defined package
`Ada.Characters.Latin_9' but with the types of the constants being
`Wide_Wide_Character' instead of `Character'.  The provision of such a
package is specifically authorized by the Ada Reference Manual (RM
A.3.3(27)).


File: gnat_rm.info,  Node: Ada Containers Formal_Doubly_Linked_Lists a-cfdlli ads,  Next: Ada Containers Formal_Hashed_Maps a-cfhama ads,  Prev: Ada Characters Wide_Wide_Latin_9 a-chzla9 ads,  Up: The GNAT Library

12.6 `Ada.Containers.Formal_Doubly_Linked_Lists' (`a-cfdlli.ads')
=================================================================

This child of `Ada.Containers' defines a modified version of the Ada
2005 container for doubly linked lists, meant to facilitate formal
verification of code using such containers. The specification of this
unit is compatible with SPARK 2014.

Note that although this container was designed with formal verification
in mind, it may well be generally useful in that it is a simplified more
efficient version than the one defined in the standard. In particular it
does not have the complex overhead required to detect cursor tampering.


File: gnat_rm.info,  Node: Ada Containers Formal_Hashed_Maps a-cfhama ads,  Next: Ada Containers Formal_Hashed_Sets a-cfhase ads,  Prev: Ada Containers Formal_Doubly_Linked_Lists a-cfdlli ads,  Up: The GNAT Library

12.7 `Ada.Containers.Formal_Hashed_Maps' (`a-cfhama.ads')
=========================================================

This child of `Ada.Containers' defines a modified version of the Ada
2005 container for hashed maps, meant to facilitate formal verification
of code using such containers. The specification of this unit is
compatible with SPARK 2014.

Note that although this container was designed with formal verification
in mind, it may well be generally useful in that it is a simplified more
efficient version than the one defined in the standard. In particular it
does not have the complex overhead required to detect cursor tampering.


File: gnat_rm.info,  Node: Ada Containers Formal_Hashed_Sets a-cfhase ads,  Next: Ada Containers Formal_Ordered_Maps a-cforma ads,  Prev: Ada Containers Formal_Hashed_Maps a-cfhama ads,  Up: The GNAT Library

12.8 `Ada.Containers.Formal_Hashed_Sets' (`a-cfhase.ads')
=========================================================

This child of `Ada.Containers' defines a modified version of the Ada
2005 container for hashed sets, meant to facilitate formal verification
of code using such containers. The specification of this unit is
compatible with SPARK 2014.

Note that although this container was designed with formal verification
in mind, it may well be generally useful in that it is a simplified more
efficient version than the one defined in the standard. In particular it
does not have the complex overhead required to detect cursor tampering.


File: gnat_rm.info,  Node: Ada Containers Formal_Ordered_Maps a-cforma ads,  Next: Ada Containers Formal_Ordered_Sets a-cforse ads,  Prev: Ada Containers Formal_Hashed_Sets a-cfhase ads,  Up: The GNAT Library

12.9 `Ada.Containers.Formal_Ordered_Maps' (`a-cforma.ads')
==========================================================

This child of `Ada.Containers' defines a modified version of the Ada
2005 container for ordered maps, meant to facilitate formal
verification of code using such containers. The specification of this
unit is compatible with SPARK 2014.

Note that although this container was designed with formal verification
in mind, it may well be generally useful in that it is a simplified more
efficient version than the one defined in the standard. In particular it
does not have the complex overhead required to detect cursor tampering.


File: gnat_rm.info,  Node: Ada Containers Formal_Ordered_Sets a-cforse ads,  Next: Ada Containers Formal_Vectors a-cofove ads,  Prev: Ada Containers Formal_Ordered_Maps a-cforma ads,  Up: The GNAT Library

12.10 `Ada.Containers.Formal_Ordered_Sets' (`a-cforse.ads')
===========================================================

This child of `Ada.Containers' defines a modified version of the Ada
2005 container for ordered sets, meant to facilitate formal
verification of code using such containers. The specification of this
unit is compatible with SPARK 2014.

Note that although this container was designed with formal verification
in mind, it may well be generally useful in that it is a simplified more
efficient version than the one defined in the standard. In particular it
does not have the complex overhead required to detect cursor tampering.


File: gnat_rm.info,  Node: Ada Containers Formal_Vectors a-cofove ads,  Next: Ada Containers Formal_Indefinite_Vectors a-cfinve ads,  Prev: Ada Containers Formal_Ordered_Sets a-cforse ads,  Up: The GNAT Library

12.11 `Ada.Containers.Formal_Vectors' (`a-cofove.ads')
======================================================

This child of `Ada.Containers' defines a modified version of the Ada
2005 container for vectors, meant to facilitate formal verification of
code using such containers. The specification of this unit is
compatible with SPARK 2014.

Note that although this container was designed with formal verification
in mind, it may well be generally useful in that it is a simplified more
efficient version than the one defined in the standard. In particular it
does not have the complex overhead required to detect cursor tampering.


File: gnat_rm.info,  Node: Ada Containers Formal_Indefinite_Vectors a-cfinve ads,  Next: Ada Containers Bounded_Holders a-coboho ads,  Prev: Ada Containers Formal_Vectors a-cofove ads,  Up: The GNAT Library

12.12 `Ada.Containers.Formal_Indefinite_Vectors' (`a-cfinve.ads')
=================================================================

This child of `Ada.Containers' defines a modified version of the Ada
2005 container for vectors of indefinite elements, meant to facilitate
formal verification of code using such containers. The specification of
this unit is compatible with SPARK 2014.

Note that although this container was designed with formal verification
in mind, it may well be generally useful in that it is a simplified more
efficient version than the one defined in the standard. In particular it
does not have the complex overhead required to detect cursor tampering.


File: gnat_rm.info,  Node: Ada Containers Bounded_Holders a-coboho ads,  Next: Ada Command_Line Environment a-colien ads,  Prev: Ada Containers Formal_Indefinite_Vectors a-cfinve ads,  Up: The GNAT Library

12.13 `Ada.Containers.Bounded_Holders' (`a-coboho.ads')
=======================================================

This child of `Ada.Containers' defines a modified version of
Indefinite_Holders that avoids heap allocation.


File: gnat_rm.info,  Node: Ada Command_Line Environment a-colien ads,  Next: Ada Command_Line Remove a-colire ads,  Prev: Ada Containers Bounded_Holders a-coboho ads,  Up: The GNAT Library

12.14 `Ada.Command_Line.Environment' (`a-colien.ads')
=====================================================

This child of `Ada.Command_Line' provides a mechanism for obtaining
environment values on systems where this concept makes sense.


File: gnat_rm.info,  Node: Ada Command_Line Remove a-colire ads,  Next: Ada Command_Line Response_File a-clrefi ads,  Prev: Ada Command_Line Environment a-colien ads,  Up: The GNAT Library

12.15 `Ada.Command_Line.Remove' (`a-colire.ads')
================================================

This child of `Ada.Command_Line' provides a mechanism for logically
removing arguments from the argument list.  Once removed, an argument
is not visible to further calls on the subprograms in
`Ada.Command_Line' will not see the removed argument.


File: gnat_rm.info,  Node: Ada Command_Line Response_File a-clrefi ads,  Next: Ada Direct_IO C_Streams a-diocst ads,  Prev: Ada Command_Line Remove a-colire ads,  Up: The GNAT Library

12.16 `Ada.Command_Line.Response_File' (`a-clrefi.ads')
=======================================================

This child of `Ada.Command_Line' provides a mechanism facilities for
getting command line arguments from a text file, called a "response
file".  Using a response file allow passing a set of arguments to an
executable longer than the maximum allowed by the system on the command
line.


File: gnat_rm.info,  Node: Ada Direct_IO C_Streams a-diocst ads,  Next: Ada Exceptions Is_Null_Occurrence a-einuoc ads,  Prev: Ada Command_Line Response_File a-clrefi ads,  Up: The GNAT Library

12.17 `Ada.Direct_IO.C_Streams' (`a-diocst.ads')
================================================

This package provides subprograms that allow interfacing between C
streams and `Direct_IO'.  The stream identifier can be extracted from a
file opened on the Ada side, and an Ada file can be constructed from a
stream opened on the C side.


File: gnat_rm.info,  Node: Ada Exceptions Is_Null_Occurrence a-einuoc ads,  Next: Ada Exceptions Last_Chance_Handler a-elchha ads,  Prev: Ada Direct_IO C_Streams a-diocst ads,  Up: The GNAT Library

12.18 `Ada.Exceptions.Is_Null_Occurrence' (`a-einuoc.ads')
==========================================================

This child subprogram provides a way of testing for the null exception
occurrence (`Null_Occurrence') without raising an exception.


File: gnat_rm.info,  Node: Ada Exceptions Last_Chance_Handler a-elchha ads,  Next: Ada Exceptions Traceback a-exctra ads,  Prev: Ada Exceptions Is_Null_Occurrence a-einuoc ads,  Up: The GNAT Library

12.19 `Ada.Exceptions.Last_Chance_Handler' (`a-elchha.ads')
===========================================================

This child subprogram is used for handling otherwise unhandled
exceptions (hence the name last chance), and perform clean ups before
terminating the program. Note that this subprogram never returns.


File: gnat_rm.info,  Node: Ada Exceptions Traceback a-exctra ads,  Next: Ada Sequential_IO C_Streams a-siocst ads,  Prev: Ada Exceptions Last_Chance_Handler a-elchha ads,  Up: The GNAT Library

12.20 `Ada.Exceptions.Traceback' (`a-exctra.ads')
=================================================

This child package provides the subprogram (`Tracebacks') to give a
traceback array of addresses based on an exception occurrence.


File: gnat_rm.info,  Node: Ada Sequential_IO C_Streams a-siocst ads,  Next: Ada Streams Stream_IO C_Streams a-ssicst ads,  Prev: Ada Exceptions Traceback a-exctra ads,  Up: The GNAT Library

12.21 `Ada.Sequential_IO.C_Streams' (`a-siocst.ads')
====================================================

This package provides subprograms that allow interfacing between C
streams and `Sequential_IO'.  The stream identifier can be extracted
from a file opened on the Ada side, and an Ada file can be constructed
from a stream opened on the C side.


File: gnat_rm.info,  Node: Ada Streams Stream_IO C_Streams a-ssicst ads,  Next: Ada Strings Unbounded Text_IO a-suteio ads,  Prev: Ada Sequential_IO C_Streams a-siocst ads,  Up: The GNAT Library

12.22 `Ada.Streams.Stream_IO.C_Streams' (`a-ssicst.ads')
========================================================

This package provides subprograms that allow interfacing between C
streams and `Stream_IO'.  The stream identifier can be extracted from a
file opened on the Ada side, and an Ada file can be constructed from a
stream opened on the C side.


File: gnat_rm.info,  Node: Ada Strings Unbounded Text_IO a-suteio ads,  Next: Ada Strings Wide_Unbounded Wide_Text_IO a-swuwti ads,  Prev: Ada Streams Stream_IO C_Streams a-ssicst ads,  Up: The GNAT Library

12.23 `Ada.Strings.Unbounded.Text_IO' (`a-suteio.ads')
======================================================

This package provides subprograms for Text_IO for unbounded strings,
avoiding the necessity for an intermediate operation with ordinary
strings.


File: gnat_rm.info,  Node: Ada Strings Wide_Unbounded Wide_Text_IO a-swuwti ads,  Next: Ada Strings Wide_Wide_Unbounded Wide_Wide_Text_IO a-szuzti ads,  Prev: Ada Strings Unbounded Text_IO a-suteio ads,  Up: The GNAT Library

12.24 `Ada.Strings.Wide_Unbounded.Wide_Text_IO' (`a-swuwti.ads')
================================================================

This package provides subprograms for Text_IO for unbounded wide
strings, avoiding the necessity for an intermediate operation with
ordinary wide strings.


File: gnat_rm.info,  Node: Ada Strings Wide_Wide_Unbounded Wide_Wide_Text_IO a-szuzti ads,  Next: Ada Text_IO C_Streams a-tiocst ads,  Prev: Ada Strings Wide_Unbounded Wide_Text_IO a-swuwti ads,  Up: The GNAT Library

12.25 `Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO' (`a-szuzti.ads')
==========================================================================

This package provides subprograms for Text_IO for unbounded wide wide
strings, avoiding the necessity for an intermediate operation with
ordinary wide wide strings.


File: gnat_rm.info,  Node: Ada Text_IO C_Streams a-tiocst ads,  Next: Ada Text_IO Reset_Standard_Files a-tirsfi ads,  Prev: Ada Strings Wide_Wide_Unbounded Wide_Wide_Text_IO a-szuzti ads,  Up: The GNAT Library

12.26 `Ada.Text_IO.C_Streams' (`a-tiocst.ads')
==============================================

This package provides subprograms that allow interfacing between C
streams and `Text_IO'.  The stream identifier can be extracted from a
file opened on the Ada side, and an Ada file can be constructed from a
stream opened on the C side.


File: gnat_rm.info,  Node: Ada Text_IO Reset_Standard_Files a-tirsfi ads,  Next: Ada Wide_Characters Unicode a-wichun ads,  Prev: Ada Text_IO C_Streams a-tiocst ads,  Up: The GNAT Library

12.27 `Ada.Text_IO.Reset_Standard_Files' (`a-tirsfi.ads')
=========================================================

This procedure is used to reset the status of the standard files used
by Ada.Text_IO.  This is useful in a situation (such as a restart in an
embedded application) where the status of the files may change during
execution (for example a standard input file may be redefined to be
interactive).


File: gnat_rm.info,  Node: Ada Wide_Characters Unicode a-wichun ads,  Next: Ada Wide_Text_IO C_Streams a-wtcstr ads,  Prev: Ada Text_IO Reset_Standard_Files a-tirsfi ads,  Up: The GNAT Library

12.28 `Ada.Wide_Characters.Unicode' (`a-wichun.ads')
====================================================

This package provides subprograms that allow categorization of
Wide_Character values according to Unicode categories.


File: gnat_rm.info,  Node: Ada Wide_Text_IO C_Streams a-wtcstr ads,  Next: Ada Wide_Text_IO Reset_Standard_Files a-wrstfi ads,  Prev: Ada Wide_Characters Unicode a-wichun ads,  Up: The GNAT Library

12.29 `Ada.Wide_Text_IO.C_Streams' (`a-wtcstr.ads')
===================================================

This package provides subprograms that allow interfacing between C
streams and `Wide_Text_IO'.  The stream identifier can be extracted
from a file opened on the Ada side, and an Ada file can be constructed
from a stream opened on the C side.


File: gnat_rm.info,  Node: Ada Wide_Text_IO Reset_Standard_Files a-wrstfi ads,  Next: Ada Wide_Wide_Characters Unicode a-zchuni ads,  Prev: Ada Wide_Text_IO C_Streams a-wtcstr ads,  Up: The GNAT Library

12.30 `Ada.Wide_Text_IO.Reset_Standard_Files' (`a-wrstfi.ads')
==============================================================

This procedure is used to reset the status of the standard files used
by Ada.Wide_Text_IO.  This is useful in a situation (such as a restart
in an embedded application) where the status of the files may change
during execution (for example a standard input file may be redefined to
be interactive).


File: gnat_rm.info,  Node: Ada Wide_Wide_Characters Unicode a-zchuni ads,  Next: Ada Wide_Wide_Text_IO C_Streams a-ztcstr ads,  Prev: Ada Wide_Text_IO Reset_Standard_Files a-wrstfi ads,  Up: The GNAT Library

12.31 `Ada.Wide_Wide_Characters.Unicode' (`a-zchuni.ads')
=========================================================

This package provides subprograms that allow categorization of
Wide_Wide_Character values according to Unicode categories.


File: gnat_rm.info,  Node: Ada Wide_Wide_Text_IO C_Streams a-ztcstr ads,  Next: Ada Wide_Wide_Text_IO Reset_Standard_Files a-zrstfi ads,  Prev: Ada Wide_Wide_Characters Unicode a-zchuni ads,  Up: The GNAT Library

12.32 `Ada.Wide_Wide_Text_IO.C_Streams' (`a-ztcstr.ads')
========================================================

This package provides subprograms that allow interfacing between C
streams and `Wide_Wide_Text_IO'.  The stream identifier can be
extracted from a file opened on the Ada side, and an Ada file can be
constructed from a stream opened on the C side.


File: gnat_rm.info,  Node: Ada Wide_Wide_Text_IO Reset_Standard_Files a-zrstfi ads,  Next: GNAT Altivec g-altive ads,  Prev: Ada Wide_Wide_Text_IO C_Streams a-ztcstr ads,  Up: The GNAT Library

12.33 `Ada.Wide_Wide_Text_IO.Reset_Standard_Files' (`a-zrstfi.ads')
===================================================================

This procedure is used to reset the status of the standard files used
by Ada.Wide_Wide_Text_IO. This is useful in a situation (such as a
restart in an embedded application) where the status of the files may
change during execution (for example a standard input file may be
redefined to be interactive).


File: gnat_rm.info,  Node: GNAT Altivec g-altive ads,  Next: GNAT Altivec Conversions g-altcon ads,  Prev: Ada Wide_Wide_Text_IO Reset_Standard_Files a-zrstfi ads,  Up: The GNAT Library

12.34 `GNAT.Altivec' (`g-altive.ads')
=====================================

This is the root package of the GNAT AltiVec binding. It provides
definitions of constants and types common to all the versions of the
binding.


File: gnat_rm.info,  Node: GNAT Altivec Conversions g-altcon ads,  Next: GNAT Altivec Vector_Operations g-alveop ads,  Prev: GNAT Altivec g-altive ads,  Up: The GNAT Library

12.35 `GNAT.Altivec.Conversions' (`g-altcon.ads')
=================================================

This package provides the Vector/View conversion routines.


File: gnat_rm.info,  Node: GNAT Altivec Vector_Operations g-alveop ads,  Next: GNAT Altivec Vector_Types g-alvety ads,  Prev: GNAT Altivec Conversions g-altcon ads,  Up: The GNAT Library

12.36 `GNAT.Altivec.Vector_Operations' (`g-alveop.ads')
=======================================================

This package exposes the Ada interface to the AltiVec operations on
vector objects. A soft emulation is included by default in the GNAT
library. The hard binding is provided as a separate package. This unit
is common to both bindings.


File: gnat_rm.info,  Node: GNAT Altivec Vector_Types g-alvety ads,  Next: GNAT Altivec Vector_Views g-alvevi ads,  Prev: GNAT Altivec Vector_Operations g-alveop ads,  Up: The GNAT Library

12.37 `GNAT.Altivec.Vector_Types' (`g-alvety.ads')
==================================================

This package exposes the various vector types part of the Ada binding
to AltiVec facilities.


File: gnat_rm.info,  Node: GNAT Altivec Vector_Views g-alvevi ads,  Next: GNAT Array_Split g-arrspl ads,  Prev: GNAT Altivec Vector_Types g-alvety ads,  Up: The GNAT Library

12.38 `GNAT.Altivec.Vector_Views' (`g-alvevi.ads')
==================================================

This package provides public 'View' data types from/to which private
vector representations can be converted via GNAT.Altivec.Conversions.
This allows convenient access to individual vector elements and
provides a simple way to initialize vector objects.


File: gnat_rm.info,  Node: GNAT Array_Split g-arrspl ads,  Next: GNAT AWK g-awk ads,  Prev: GNAT Altivec Vector_Views g-alvevi ads,  Up: The GNAT Library

12.39 `GNAT.Array_Split' (`g-arrspl.ads')
=========================================

Useful array-manipulation routines: given a set of separators, split an
array wherever the separators appear, and provide direct access to the
resulting slices.


File: gnat_rm.info,  Node: GNAT AWK g-awk ads,  Next: GNAT Bounded_Buffers g-boubuf ads,  Prev: GNAT Array_Split g-arrspl ads,  Up: The GNAT Library

12.40 `GNAT.AWK' (`g-awk.ads')
==============================

Provides AWK-like parsing functions, with an easy interface for parsing
one or more files containing formatted data.  The file is viewed as a
database where each record is a line and a field is a data element in
this line.


File: gnat_rm.info,  Node: GNAT Bounded_Buffers g-boubuf ads,  Next: GNAT Bounded_Mailboxes g-boumai ads,  Prev: GNAT AWK g-awk ads,  Up: The GNAT Library

12.41 `GNAT.Bounded_Buffers' (`g-boubuf.ads')
=============================================

Provides a concurrent generic bounded buffer abstraction.  Instances are
useful directly or as parts of the implementations of other
abstractions, such as mailboxes.


File: gnat_rm.info,  Node: GNAT Bounded_Mailboxes g-boumai ads,  Next: GNAT Bubble_Sort g-bubsor ads,  Prev: GNAT Bounded_Buffers g-boubuf ads,  Up: The GNAT Library

12.42 `GNAT.Bounded_Mailboxes' (`g-boumai.ads')
===============================================

Provides a thread-safe asynchronous intertask mailbox communication
facility.


File: gnat_rm.info,  Node: GNAT Bubble_Sort g-bubsor ads,  Next: GNAT Bubble_Sort_A g-busora ads,  Prev: GNAT Bounded_Mailboxes g-boumai ads,  Up: The GNAT Library

12.43 `GNAT.Bubble_Sort' (`g-bubsor.ads')
=========================================

Provides a general implementation of bubble sort usable for sorting
arbitrary data items.  Exchange and comparison procedures are provided
by passing access-to-procedure values.


File: gnat_rm.info,  Node: GNAT Bubble_Sort_A g-busora ads,  Next: GNAT Bubble_Sort_G g-busorg ads,  Prev: GNAT Bubble_Sort g-bubsor ads,  Up: The GNAT Library

12.44 `GNAT.Bubble_Sort_A' (`g-busora.ads')
===========================================

Provides a general implementation of bubble sort usable for sorting
arbitrary data items.  Move and comparison procedures are provided by
passing access-to-procedure values. This is an older version, retained
for compatibility. Usually `GNAT.Bubble_Sort' will be preferable.


File: gnat_rm.info,  Node: GNAT Bubble_Sort_G g-busorg ads,  Next: GNAT Byte_Order_Mark g-byorma ads,  Prev: GNAT Bubble_Sort_A g-busora ads,  Up: The GNAT Library

12.45 `GNAT.Bubble_Sort_G' (`g-busorg.ads')
===========================================

Similar to `Bubble_Sort_A' except that the move and sorting procedures
are provided as generic parameters, this improves efficiency, especially
if the procedures can be inlined, at the expense of duplicating code for
multiple instantiations.


File: gnat_rm.info,  Node: GNAT Byte_Order_Mark g-byorma ads,  Next: GNAT Byte_Swapping g-bytswa ads,  Prev: GNAT Bubble_Sort_G g-busorg ads,  Up: The GNAT Library

12.46 `GNAT.Byte_Order_Mark' (`g-byorma.ads')
=============================================

Provides a routine which given a string, reads the start of the string
to see whether it is one of the standard byte order marks (BOM's) which
signal the encoding of the string. The routine includes detection of
special XML sequences for various UCS input formats.


File: gnat_rm.info,  Node: GNAT Byte_Swapping g-bytswa ads,  Next: GNAT Calendar g-calend ads,  Prev: GNAT Byte_Order_Mark g-byorma ads,  Up: The GNAT Library

12.47 `GNAT.Byte_Swapping' (`g-bytswa.ads')
===========================================

General routines for swapping the bytes in 2-, 4-, and 8-byte
quantities.  Machine-specific implementations are available in some
cases.


File: gnat_rm.info,  Node: GNAT Calendar g-calend ads,  Next: GNAT Calendar Time_IO g-catiio ads,  Prev: GNAT Byte_Swapping g-bytswa ads,  Up: The GNAT Library

12.48 `GNAT.Calendar' (`g-calend.ads')
======================================

Extends the facilities provided by `Ada.Calendar' to include handling
of days of the week, an extended `Split' and `Time_Of' capability.
Also provides conversion of `Ada.Calendar.Time' values to and from the
C `timeval' format.


File: gnat_rm.info,  Node: GNAT Calendar Time_IO g-catiio ads,  Next: GNAT CRC32 g-crc32 ads,  Prev: GNAT Calendar g-calend ads,  Up: The GNAT Library

12.49 `GNAT.Calendar.Time_IO' (`g-catiio.ads')
==============================================


File: gnat_rm.info,  Node: GNAT CRC32 g-crc32 ads,  Next: GNAT Case_Util g-casuti ads,  Prev: GNAT Calendar Time_IO g-catiio ads,  Up: The GNAT Library

12.50 `GNAT.CRC32' (`g-crc32.ads')
==================================

This package implements the CRC-32 algorithm.  For a full description
of this algorithm see `Computation of Cyclic Redundancy Checks via
Table Look-Up', `Communications of the ACM', Vol. 31 No. 8, pp.
1008-1013, Aug. 1988.  Sarwate, D.V.


File: gnat_rm.info,  Node: GNAT Case_Util g-casuti ads,  Next: GNAT CGI g-cgi ads,  Prev: GNAT CRC32 g-crc32 ads,  Up: The GNAT Library

12.51 `GNAT.Case_Util' (`g-casuti.ads')
=======================================

A set of simple routines for handling upper and lower casing of strings
without the overhead of the full casing tables in
`Ada.Characters.Handling'.


File: gnat_rm.info,  Node: GNAT CGI g-cgi ads,  Next: GNAT CGI Cookie g-cgicoo ads,  Prev: GNAT Case_Util g-casuti ads,  Up: The GNAT Library

12.52 `GNAT.CGI' (`g-cgi.ads')
==============================

This is a package for interfacing a GNAT program with a Web server via
the Common Gateway Interface (CGI).  Basically this package parses the
CGI parameters, which are a set of key/value pairs sent by the Web
server.  It builds a table whose index is the key and provides some
services to deal with this table.


File: gnat_rm.info,  Node: GNAT CGI Cookie g-cgicoo ads,  Next: GNAT CGI Debug g-cgideb ads,  Prev: GNAT CGI g-cgi ads,  Up: The GNAT Library

12.53 `GNAT.CGI.Cookie' (`g-cgicoo.ads')
========================================

This is a package to interface a GNAT program with a Web server via the
Common Gateway Interface (CGI).  It exports services to deal with Web
cookies (piece of information kept in the Web client software).


File: gnat_rm.info,  Node: GNAT CGI Debug g-cgideb ads,  Next: GNAT Command_Line g-comlin ads,  Prev: GNAT CGI Cookie g-cgicoo ads,  Up: The GNAT Library

12.54 `GNAT.CGI.Debug' (`g-cgideb.ads')
=======================================

This is a package to help debugging CGI (Common Gateway Interface)
programs written in Ada.


File: gnat_rm.info,  Node: GNAT Command_Line g-comlin ads,  Next: GNAT Compiler_Version g-comver ads,  Prev: GNAT CGI Debug g-cgideb ads,  Up: The GNAT Library

12.55 `GNAT.Command_Line' (`g-comlin.ads')
==========================================

Provides a high level interface to `Ada.Command_Line' facilities,
including the ability to scan for named switches with optional
parameters and expand file names using wild card notations.


File: gnat_rm.info,  Node: GNAT Compiler_Version g-comver ads,  Next: GNAT Ctrl_C g-ctrl_c ads,  Prev: GNAT Command_Line g-comlin ads,  Up: The GNAT Library

12.56 `GNAT.Compiler_Version' (`g-comver.ads')
==============================================

Provides a routine for obtaining the version of the compiler used to
compile the program. More accurately this is the version of the binder
used to bind the program (this will normally be the same as the version
of the compiler if a consistent tool set is used to compile all units
of a partition).


File: gnat_rm.info,  Node: GNAT Ctrl_C g-ctrl_c ads,  Next: GNAT Current_Exception g-curexc ads,  Prev: GNAT Compiler_Version g-comver ads,  Up: The GNAT Library

12.57 `GNAT.Ctrl_C' (`g-ctrl_c.ads')
====================================

Provides a simple interface to handle Ctrl-C keyboard events.


File: gnat_rm.info,  Node: GNAT Current_Exception g-curexc ads,  Next: GNAT Debug_Pools g-debpoo ads,  Prev: GNAT Ctrl_C g-ctrl_c ads,  Up: The GNAT Library

12.58 `GNAT.Current_Exception' (`g-curexc.ads')
===============================================

Provides access to information on the current exception that has been
raised without the need for using the Ada 95 / Ada 2005 exception
choice parameter specification syntax.  This is particularly useful in
simulating typical facilities for obtaining information about
exceptions provided by Ada 83 compilers.


File: gnat_rm.info,  Node: GNAT Debug_Pools g-debpoo ads,  Next: GNAT Debug_Utilities g-debuti ads,  Prev: GNAT Current_Exception g-curexc ads,  Up: The GNAT Library

12.59 `GNAT.Debug_Pools' (`g-debpoo.ads')
=========================================

Provide a debugging storage pools that helps tracking memory corruption
problems.  See `The GNAT Debug_Pool Facility' section in the `GNAT
User's Guide'.


File: gnat_rm.info,  Node: GNAT Debug_Utilities g-debuti ads,  Next: GNAT Decode_String g-decstr ads,  Prev: GNAT Debug_Pools g-debpoo ads,  Up: The GNAT Library

12.60 `GNAT.Debug_Utilities' (`g-debuti.ads')
=============================================

Provides a few useful utilities for debugging purposes, including
conversion to and from string images of address values. Supports both C
and Ada formats for hexadecimal literals.


File: gnat_rm.info,  Node: GNAT Decode_String g-decstr ads,  Next: GNAT Decode_UTF8_String g-deutst ads,  Prev: GNAT Debug_Utilities g-debuti ads,  Up: The GNAT Library

12.61 `GNAT.Decode_String' (`g-decstr.ads')
===========================================

A generic package providing routines for decoding wide character and
wide wide character strings encoded as sequences of 8-bit characters
using a specified encoding method. Includes validation routines, and
also routines for stepping to next or previous encoded character in an
encoded string.  Useful in conjunction with Unicode character coding.
Note there is a preinstantiation for UTF-8. See next entry.


File: gnat_rm.info,  Node: GNAT Decode_UTF8_String g-deutst ads,  Next: GNAT Directory_Operations g-dirope ads,  Prev: GNAT Decode_String g-decstr ads,  Up: The GNAT Library

12.62 `GNAT.Decode_UTF8_String' (`g-deutst.ads')
================================================

A preinstantiation of GNAT.Decode_Strings for UTF-8 encoding.


File: gnat_rm.info,  Node: GNAT Directory_Operations g-dirope ads,  Next: GNAT Directory_Operations Iteration g-diopit ads,  Prev: GNAT Decode_UTF8_String g-deutst ads,  Up: The GNAT Library

12.63 `GNAT.Directory_Operations' (`g-dirope.ads')
==================================================

Provides a set of routines for manipulating directories, including
changing the current directory, making new directories, and scanning
the files in a directory.


File: gnat_rm.info,  Node: GNAT Directory_Operations Iteration g-diopit ads,  Next: GNAT Dynamic_HTables g-dynhta ads,  Prev: GNAT Directory_Operations g-dirope ads,  Up: The GNAT Library

12.64 `GNAT.Directory_Operations.Iteration' (`g-diopit.ads')
============================================================

A child unit of GNAT.Directory_Operations providing additional
operations for iterating through directories.


File: gnat_rm.info,  Node: GNAT Dynamic_HTables g-dynhta ads,  Next: GNAT Dynamic_Tables g-dyntab ads,  Prev: GNAT Directory_Operations Iteration g-diopit ads,  Up: The GNAT Library

12.65 `GNAT.Dynamic_HTables' (`g-dynhta.ads')
=============================================

A generic implementation of hash tables that can be used to hash
arbitrary data.  Provided in two forms, a simple form with built in
hash functions, and a more complex form in which the hash function is
supplied.

This package provides a facility similar to that of `GNAT.HTable',
except that this package declares a type that can be used to define
dynamic instances of the hash table, while an instantiation of
`GNAT.HTable' creates a single instance of the hash table.


File: gnat_rm.info,  Node: GNAT Dynamic_Tables g-dyntab ads,  Next: GNAT Encode_String g-encstr ads,  Prev: GNAT Dynamic_HTables g-dynhta ads,  Up: The GNAT Library

12.66 `GNAT.Dynamic_Tables' (`g-dyntab.ads')
============================================

A generic package providing a single dimension array abstraction where
the length of the array can be dynamically modified.

This package provides a facility similar to that of `GNAT.Table',
except that this package declares a type that can be used to define
dynamic instances of the table, while an instantiation of `GNAT.Table'
creates a single instance of the table type.


File: gnat_rm.info,  Node: GNAT Encode_String g-encstr ads,  Next: GNAT Encode_UTF8_String g-enutst ads,  Prev: GNAT Dynamic_Tables g-dyntab ads,  Up: The GNAT Library

12.67 `GNAT.Encode_String' (`g-encstr.ads')
===========================================

A generic package providing routines for encoding wide character and
wide wide character strings as sequences of 8-bit characters using a
specified encoding method. Useful in conjunction with Unicode character
coding.  Note there is a preinstantiation for UTF-8. See next entry.


File: gnat_rm.info,  Node: GNAT Encode_UTF8_String g-enutst ads,  Next: GNAT Exception_Actions g-excact ads,  Prev: GNAT Encode_String g-encstr ads,  Up: The GNAT Library

12.68 `GNAT.Encode_UTF8_String' (`g-enutst.ads')
================================================

A preinstantiation of GNAT.Encode_Strings for UTF-8 encoding.


File: gnat_rm.info,  Node: GNAT Exception_Actions g-excact ads,  Next: GNAT Exception_Traces g-exctra ads,  Prev: GNAT Encode_UTF8_String g-enutst ads,  Up: The GNAT Library

12.69 `GNAT.Exception_Actions' (`g-excact.ads')
===============================================

Provides callbacks when an exception is raised. Callbacks can be
registered for specific exceptions, or when any exception is raised.
This can be used for instance to force a core dump to ease debugging.


File: gnat_rm.info,  Node: GNAT Exception_Traces g-exctra ads,  Next: GNAT Exceptions g-expect ads,  Prev: GNAT Exception_Actions g-excact ads,  Up: The GNAT Library

12.70 `GNAT.Exception_Traces' (`g-exctra.ads')
==============================================

Provides an interface allowing to control automatic output upon
exception occurrences.


File: gnat_rm.info,  Node: GNAT Exceptions g-expect ads,  Next: GNAT Expect g-expect ads,  Prev: GNAT Exception_Traces g-exctra ads,  Up: The GNAT Library

12.71 `GNAT.Exceptions' (`g-expect.ads')
========================================

Normally it is not possible to raise an exception with a message from a
subprogram in a pure package, since the necessary types and subprograms
are in `Ada.Exceptions' which is not a pure unit. `GNAT.Exceptions'
provides a facility for getting around this limitation for a few
predefined exceptions, and for example allow raising `Constraint_Error'
with a message from a pure subprogram.


File: gnat_rm.info,  Node: GNAT Expect g-expect ads,  Next: GNAT Expect TTY g-exptty ads,  Prev: GNAT Exceptions g-expect ads,  Up: The GNAT Library

12.72 `GNAT.Expect' (`g-expect.ads')
====================================

Provides a set of subprograms similar to what is available with the
standard Tcl Expect tool.  It allows you to easily spawn and
communicate with an external process.  You can send commands or inputs
to the process, and compare the output with some expected regular
expression. Currently `GNAT.Expect' is implemented on all native GNAT
ports.  It is not implemented for cross ports, and in particular is not
implemented for VxWorks or LynxOS.


File: gnat_rm.info,  Node: GNAT Expect TTY g-exptty ads,  Next: GNAT Float_Control g-flocon ads,  Prev: GNAT Expect g-expect ads,  Up: The GNAT Library

12.73 `GNAT.Expect.TTY' (`g-exptty.ads')
========================================

As GNAT.Expect but using pseudo-terminal.  Currently `GNAT.Expect.TTY'
is implemented on all native GNAT ports. It is not implemented for
cross ports, and in particular is not implemented for VxWorks or LynxOS.


File: gnat_rm.info,  Node: GNAT Float_Control g-flocon ads,  Next: GNAT Formatted_String g-forstr ads,  Prev: GNAT Expect TTY g-exptty ads,  Up: The GNAT Library

12.74 `GNAT.Float_Control' (`g-flocon.ads')
===========================================

Provides an interface for resetting the floating-point processor into
the mode required for correct semantic operation in Ada.  Some third
party library calls may cause this mode to be modified, and the Reset
procedure in this package can be used to reestablish the required mode.


File: gnat_rm.info,  Node: GNAT Formatted_String g-forstr ads,  Next: GNAT Heap_Sort g-heasor ads,  Prev: GNAT Float_Control g-flocon ads,  Up: The GNAT Library

12.75 `GNAT.Formatted_String' (`g-forstr.ads')
==============================================

Provides support for C/C++ printf() formatted strings. The format is
copied from the printf() routine and should therefore gives identical
output. Some generic routines are provided to be able to use types
derived from Integer, Float or enumerations as values for the formatted
string.


File: gnat_rm.info,  Node: GNAT Heap_Sort g-heasor ads,  Next: GNAT Heap_Sort_A g-hesora ads,  Prev: GNAT Formatted_String g-forstr ads,  Up: The GNAT Library

12.76 `GNAT.Heap_Sort' (`g-heasor.ads')
=======================================

Provides a general implementation of heap sort usable for sorting
arbitrary data items. Exchange and comparison procedures are provided
by passing access-to-procedure values.  The algorithm used is a
modified heap sort that performs approximately N*log(N) comparisons in
the worst case.


File: gnat_rm.info,  Node: GNAT Heap_Sort_A g-hesora ads,  Next: GNAT Heap_Sort_G g-hesorg ads,  Prev: GNAT Heap_Sort g-heasor ads,  Up: The GNAT Library

12.77 `GNAT.Heap_Sort_A' (`g-hesora.ads')
=========================================

Provides a general implementation of heap sort usable for sorting
arbitrary data items. Move and comparison procedures are provided by
passing access-to-procedure values.  The algorithm used is a modified
heap sort that performs approximately N*log(N) comparisons in the worst
case.  This differs from `GNAT.Heap_Sort' in having a less convenient
interface, but may be slightly more efficient.


File: gnat_rm.info,  Node: GNAT Heap_Sort_G g-hesorg ads,  Next: GNAT HTable g-htable ads,  Prev: GNAT Heap_Sort_A g-hesora ads,  Up: The GNAT Library

12.78 `GNAT.Heap_Sort_G' (`g-hesorg.ads')
=========================================

Similar to `Heap_Sort_A' except that the move and sorting procedures
are provided as generic parameters, this improves efficiency, especially
if the procedures can be inlined, at the expense of duplicating code for
multiple instantiations.


File: gnat_rm.info,  Node: GNAT HTable g-htable ads,  Next: GNAT IO g-io ads,  Prev: GNAT Heap_Sort_G g-hesorg ads,  Up: The GNAT Library

12.79 `GNAT.HTable' (`g-htable.ads')
====================================

A generic implementation of hash tables that can be used to hash
arbitrary data.  Provides two approaches, one a simple static approach,
and the other allowing arbitrary dynamic hash tables.


File: gnat_rm.info,  Node: GNAT IO g-io ads,  Next: GNAT IO_Aux g-io_aux ads,  Prev: GNAT HTable g-htable ads,  Up: The GNAT Library

12.80 `GNAT.IO' (`g-io.ads')
============================

A simple preelaborable input-output package that provides a subset of
simple Text_IO functions for reading characters and strings from
Standard_Input, and writing characters, strings and integers to either
Standard_Output or Standard_Error.


File: gnat_rm.info,  Node: GNAT IO_Aux g-io_aux ads,  Next: GNAT Lock_Files g-locfil ads,  Prev: GNAT IO g-io ads,  Up: The GNAT Library

12.81 `GNAT.IO_Aux' (`g-io_aux.ads')
====================================

Provides some auxiliary functions for use with Text_IO, including a test
for whether a file exists, and functions for reading a line of text.


File: gnat_rm.info,  Node: GNAT Lock_Files g-locfil ads,  Next: GNAT MBBS_Discrete_Random g-mbdira ads,  Prev: GNAT IO_Aux g-io_aux ads,  Up: The GNAT Library

12.82 `GNAT.Lock_Files' (`g-locfil.ads')
========================================

Provides a general interface for using files as locks.  Can be used for
providing program level synchronization.


File: gnat_rm.info,  Node: GNAT MBBS_Discrete_Random g-mbdira ads,  Next: GNAT MBBS_Float_Random g-mbflra ads,  Prev: GNAT Lock_Files g-locfil ads,  Up: The GNAT Library

12.83 `GNAT.MBBS_Discrete_Random' (`g-mbdira.ads')
==================================================

The original implementation of `Ada.Numerics.Discrete_Random'.  Uses a
modified version of the Blum-Blum-Shub generator.


File: gnat_rm.info,  Node: GNAT MBBS_Float_Random g-mbflra ads,  Next: GNAT MD5 g-md5 ads,  Prev: GNAT MBBS_Discrete_Random g-mbdira ads,  Up: The GNAT Library

12.84 `GNAT.MBBS_Float_Random' (`g-mbflra.ads')
===============================================

The original implementation of `Ada.Numerics.Float_Random'.  Uses a
modified version of the Blum-Blum-Shub generator.


File: gnat_rm.info,  Node: GNAT MD5 g-md5 ads,  Next: GNAT Memory_Dump g-memdum ads,  Prev: GNAT MBBS_Float_Random g-mbflra ads,  Up: The GNAT Library

12.85 `GNAT.MD5' (`g-md5.ads')
==============================

Implements the MD5 Message-Digest Algorithm as described in RFC 1321,
and the HMAC-MD5 message authentication function as described in RFC
2104 and FIPS PUB 198.


File: gnat_rm.info,  Node: GNAT Memory_Dump g-memdum ads,  Next: GNAT Most_Recent_Exception g-moreex ads,  Prev: GNAT MD5 g-md5 ads,  Up: The GNAT Library

12.86 `GNAT.Memory_Dump' (`g-memdum.ads')
=========================================

Provides a convenient routine for dumping raw memory to either the
standard output or standard error files. Uses GNAT.IO for actual output.


File: gnat_rm.info,  Node: GNAT Most_Recent_Exception g-moreex ads,  Next: GNAT OS_Lib g-os_lib ads,  Prev: GNAT Memory_Dump g-memdum ads,  Up: The GNAT Library

12.87 `GNAT.Most_Recent_Exception' (`g-moreex.ads')
===================================================

Provides access to the most recently raised exception.  Can be used for
various logging purposes, including duplicating functionality of some
Ada 83 implementation dependent extensions.


File: gnat_rm.info,  Node: GNAT OS_Lib g-os_lib ads,  Next: GNAT Perfect_Hash_Generators g-pehage ads,  Prev: GNAT Most_Recent_Exception g-moreex ads,  Up: The GNAT Library

12.88 `GNAT.OS_Lib' (`g-os_lib.ads')
====================================

Provides a range of target independent operating system interface
functions, including time/date management, file operations, subprocess
management, including a portable spawn procedure, and access to
environment variables and error return codes.


File: gnat_rm.info,  Node: GNAT Perfect_Hash_Generators g-pehage ads,  Next: GNAT Random_Numbers g-rannum ads,  Prev: GNAT OS_Lib g-os_lib ads,  Up: The GNAT Library

12.89 `GNAT.Perfect_Hash_Generators' (`g-pehage.ads')
=====================================================

Provides a generator of static minimal perfect hash functions. No
collisions occur and each item can be retrieved from the table in one
probe (perfect property). The hash table size corresponds to the exact
size of the key set and no larger (minimal property). The key set has to
be know in advance (static property). The hash functions are also order
preserving. If w2 is inserted after w1 in the generator, their hashcode
are in the same order. These hashing functions are very convenient for
use with realtime applications.


File: gnat_rm.info,  Node: GNAT Random_Numbers g-rannum ads,  Next: GNAT Regexp g-regexp ads,  Prev: GNAT Perfect_Hash_Generators g-pehage ads,  Up: The GNAT Library

12.90 `GNAT.Random_Numbers' (`g-rannum.ads')
============================================

Provides random number capabilities which extend those available in the
standard Ada library and are more convenient to use.


File: gnat_rm.info,  Node: GNAT Regexp g-regexp ads,  Next: GNAT Registry g-regist ads,  Prev: GNAT Random_Numbers g-rannum ads,  Up: The GNAT Library

12.91 `GNAT.Regexp' (`g-regexp.ads')
====================================

A simple implementation of regular expressions, using a subset of
regular expression syntax copied from familiar Unix style utilities.
This is the simplest of the three pattern matching packages provided,
and is particularly suitable for 'file globbing' applications.


File: gnat_rm.info,  Node: GNAT Registry g-regist ads,  Next: GNAT Regpat g-regpat ads,  Prev: GNAT Regexp g-regexp ads,  Up: The GNAT Library

12.92 `GNAT.Registry' (`g-regist.ads')
======================================

This is a high level binding to the Windows registry.  It is possible to
do simple things like reading a key value, creating a new key.  For full
registry API, but at a lower level of abstraction, refer to the
Win32.Winreg package provided with the Win32Ada binding


File: gnat_rm.info,  Node: GNAT Regpat g-regpat ads,  Next: GNAT Rewrite_Data g-rewdat ads,  Prev: GNAT Registry g-regist ads,  Up: The GNAT Library

12.93 `GNAT.Regpat' (`g-regpat.ads')
====================================

A complete implementation of Unix-style regular expression matching,
copied from the original V7 style regular expression library written in
C by Henry Spencer (and binary compatible with this C library).


File: gnat_rm.info,  Node: GNAT Rewrite_Data g-rewdat ads,  Next: GNAT Secondary_Stack_Info g-sestin ads,  Prev: GNAT Regpat g-regpat ads,  Up: The GNAT Library

12.94 `GNAT.Rewrite_Data' (`g-rewdat.ads')
==========================================

A unit to rewrite on-the-fly string occurrences in a stream of data.
The implementation has a very minimal memory footprint as the full
content to be processed is not loaded into memory all at once. This
makes this interface usable for large files or socket streams.


File: gnat_rm.info,  Node: GNAT Secondary_Stack_Info g-sestin ads,  Next: GNAT Semaphores g-semaph ads,  Prev: GNAT Rewrite_Data g-rewdat ads,  Up: The GNAT Library

12.95 `GNAT.Secondary_Stack_Info' (`g-sestin.ads')
==================================================

Provide the capability to query the high water mark of the current
task's secondary stack.


File: gnat_rm.info,  Node: GNAT Semaphores g-semaph ads,  Next: GNAT Serial_Communications g-sercom ads,  Prev: GNAT Secondary_Stack_Info g-sestin ads,  Up: The GNAT Library

12.96 `GNAT.Semaphores' (`g-semaph.ads')
========================================

Provides classic counting and binary semaphores using protected types.


File: gnat_rm.info,  Node: GNAT Serial_Communications g-sercom ads,  Next: GNAT SHA1 g-sha1 ads,  Prev: GNAT Semaphores g-semaph ads,  Up: The GNAT Library

12.97 `GNAT.Serial_Communications' (`g-sercom.ads')
===================================================

Provides a simple interface to send and receive data over a serial
port. This is only supported on GNU/Linux and Windows.


File: gnat_rm.info,  Node: GNAT SHA1 g-sha1 ads,  Next: GNAT SHA224 g-sha224 ads,  Prev: GNAT Serial_Communications g-sercom ads,  Up: The GNAT Library

12.98 `GNAT.SHA1' (`g-sha1.ads')
================================

Implements the SHA-1 Secure Hash Algorithm as described in FIPS PUB
180-3 and RFC 3174, and the HMAC-SHA1 message authentication function
as described in RFC 2104 and FIPS PUB 198.


File: gnat_rm.info,  Node: GNAT SHA224 g-sha224 ads,  Next: GNAT SHA256 g-sha256 ads,  Prev: GNAT SHA1 g-sha1 ads,  Up: The GNAT Library

12.99 `GNAT.SHA224' (`g-sha224.ads')
====================================

Implements the SHA-224 Secure Hash Algorithm as described in FIPS PUB
180-3, and the HMAC-SHA224 message authentication function as described
in RFC 2104 and FIPS PUB 198.


File: gnat_rm.info,  Node: GNAT SHA256 g-sha256 ads,  Next: GNAT SHA384 g-sha384 ads,  Prev: GNAT SHA224 g-sha224 ads,  Up: The GNAT Library

12.100 `GNAT.SHA256' (`g-sha256.ads')
=====================================

Implements the SHA-256 Secure Hash Algorithm as described in FIPS PUB
180-3, and the HMAC-SHA256 message authentication function as described
in RFC 2104 and FIPS PUB 198.


File: gnat_rm.info,  Node: GNAT SHA384 g-sha384 ads,  Next: GNAT SHA512 g-sha512 ads,  Prev: GNAT SHA256 g-sha256 ads,  Up: The GNAT Library

12.101 `GNAT.SHA384' (`g-sha384.ads')
=====================================

Implements the SHA-384 Secure Hash Algorithm as described in FIPS PUB
180-3, and the HMAC-SHA384 message authentication function as described
in RFC 2104 and FIPS PUB 198.


File: gnat_rm.info,  Node: GNAT SHA512 g-sha512 ads,  Next: GNAT Signals g-signal ads,  Prev: GNAT SHA384 g-sha384 ads,  Up: The GNAT Library

12.102 `GNAT.SHA512' (`g-sha512.ads')
=====================================

Implements the SHA-512 Secure Hash Algorithm as described in FIPS PUB
180-3, and the HMAC-SHA512 message authentication function as described
in RFC 2104 and FIPS PUB 198.


File: gnat_rm.info,  Node: GNAT Signals g-signal ads,  Next: GNAT Sockets g-socket ads,  Prev: GNAT SHA512 g-sha512 ads,  Up: The GNAT Library

12.103 `GNAT.Signals' (`g-signal.ads')
======================================

Provides the ability to manipulate the blocked status of signals on
supported targets.


File: gnat_rm.info,  Node: GNAT Sockets g-socket ads,  Next: GNAT Source_Info g-souinf ads,  Prev: GNAT Signals g-signal ads,  Up: The GNAT Library

12.104 `GNAT.Sockets' (`g-socket.ads')
======================================

A high level and portable interface to develop sockets based
applications.  This package is based on the sockets thin binding found
in `GNAT.Sockets.Thin'. Currently `GNAT.Sockets' is implemented on all
native GNAT ports and on VxWorks cross prots.  It is not implemented for
the LynxOS cross port.


File: gnat_rm.info,  Node: GNAT Source_Info g-souinf ads,  Next: GNAT Spelling_Checker g-speche ads,  Prev: GNAT Sockets g-socket ads,  Up: The GNAT Library

12.105 `GNAT.Source_Info' (`g-souinf.ads')
==========================================

Provides subprograms that give access to source code information known
at compile time, such as the current file name and line number. Also
provides subprograms yielding the date and time of the current
compilation (like the C macros `__DATE__' and `__TIME__')


File: gnat_rm.info,  Node: GNAT Spelling_Checker g-speche ads,  Next: GNAT Spelling_Checker_Generic g-spchge ads,  Prev: GNAT Source_Info g-souinf ads,  Up: The GNAT Library

12.106 `GNAT.Spelling_Checker' (`g-speche.ads')
===============================================

Provides a function for determining whether one string is a plausible
near misspelling of another string.


File: gnat_rm.info,  Node: GNAT Spelling_Checker_Generic g-spchge ads,  Next: GNAT Spitbol Patterns g-spipat ads,  Prev: GNAT Spelling_Checker g-speche ads,  Up: The GNAT Library

12.107 `GNAT.Spelling_Checker_Generic' (`g-spchge.ads')
=======================================================

Provides a generic function that can be instantiated with a string type
for determining whether one string is a plausible near misspelling of
another string.


File: gnat_rm.info,  Node: GNAT Spitbol Patterns g-spipat ads,  Next: GNAT Spitbol g-spitbo ads,  Prev: GNAT Spelling_Checker_Generic g-spchge ads,  Up: The GNAT Library

12.108 `GNAT.Spitbol.Patterns' (`g-spipat.ads')
===============================================

A complete implementation of SNOBOL4 style pattern matching.  This is
the most elaborate of the pattern matching packages provided.  It fully
duplicates the SNOBOL4 dynamic pattern construction and matching
capabilities, using the efficient algorithm developed by Robert Dewar
for the SPITBOL system.


File: gnat_rm.info,  Node: GNAT Spitbol g-spitbo ads,  Next: GNAT Spitbol Table_Boolean g-sptabo ads,  Prev: GNAT Spitbol Patterns g-spipat ads,  Up: The GNAT Library

12.109 `GNAT.Spitbol' (`g-spitbo.ads')
======================================

The top level package of the collection of SPITBOL-style functionality,
this package provides basic SNOBOL4 string manipulation functions, such
as Pad, Reverse, Trim, Substr capability, as well as a generic table
function useful for constructing arbitrary mappings from strings in the
style of the SNOBOL4 TABLE function.


File: gnat_rm.info,  Node: GNAT Spitbol Table_Boolean g-sptabo ads,  Next: GNAT Spitbol Table_Integer g-sptain ads,  Prev: GNAT Spitbol g-spitbo ads,  Up: The GNAT Library

12.110 `GNAT.Spitbol.Table_Boolean' (`g-sptabo.ads')
====================================================

A library level of instantiation of `GNAT.Spitbol.Patterns.Table' for
type `Standard.Boolean', giving an implementation of sets of string
values.


File: gnat_rm.info,  Node: GNAT Spitbol Table_Integer g-sptain ads,  Next: GNAT Spitbol Table_VString g-sptavs ads,  Prev: GNAT Spitbol Table_Boolean g-sptabo ads,  Up: The GNAT Library

12.111 `GNAT.Spitbol.Table_Integer' (`g-sptain.ads')
====================================================

A library level of instantiation of `GNAT.Spitbol.Patterns.Table' for
type `Standard.Integer', giving an implementation of maps from string
to integer values.


File: gnat_rm.info,  Node: GNAT Spitbol Table_VString g-sptavs ads,  Next: GNAT SSE g-sse ads,  Prev: GNAT Spitbol Table_Integer g-sptain ads,  Up: The GNAT Library

12.112 `GNAT.Spitbol.Table_VString' (`g-sptavs.ads')
====================================================

A library level of instantiation of `GNAT.Spitbol.Patterns.Table' for a
variable length string type, giving an implementation of general maps
from strings to strings.


File: gnat_rm.info,  Node: GNAT SSE g-sse ads,  Next: GNAT SSE Vector_Types g-ssvety ads,  Prev: GNAT Spitbol Table_VString g-sptavs ads,  Up: The GNAT Library

12.113 `GNAT.SSE' (`g-sse.ads')
===============================

Root of a set of units aimed at offering Ada bindings to a subset of
the Intel(r) Streaming SIMD Extensions with GNAT on the x86 family of
targets.  It exposes vector component types together with a general
introduction to the binding contents and use.


File: gnat_rm.info,  Node: GNAT SSE Vector_Types g-ssvety ads,  Next: GNAT Strings g-string ads,  Prev: GNAT SSE g-sse ads,  Up: The GNAT Library

12.114 `GNAT.SSE.Vector_Types' (`g-ssvety.ads')
===============================================

SSE vector types for use with SSE related intrinsics.


File: gnat_rm.info,  Node: GNAT Strings g-string ads,  Next: GNAT String_Split g-strspl ads,  Prev: GNAT SSE Vector_Types g-ssvety ads,  Up: The GNAT Library

12.115 `GNAT.Strings' (`g-string.ads')
======================================

Common String access types and related subprograms. Basically it
defines a string access and an array of string access types.


File: gnat_rm.info,  Node: GNAT String_Split g-strspl ads,  Next: GNAT Table g-table ads,  Prev: GNAT Strings g-string ads,  Up: The GNAT Library

12.116 `GNAT.String_Split' (`g-strspl.ads')
===========================================

Useful string manipulation routines: given a set of separators, split a
string wherever the separators appear, and provide direct access to the
resulting slices. This package is instantiated from `GNAT.Array_Split'.


File: gnat_rm.info,  Node: GNAT Table g-table ads,  Next: GNAT Task_Lock g-tasloc ads,  Prev: GNAT String_Split g-strspl ads,  Up: The GNAT Library

12.117 `GNAT.Table' (`g-table.ads')
===================================

A generic package providing a single dimension array abstraction where
the length of the array can be dynamically modified.

This package provides a facility similar to that of
`GNAT.Dynamic_Tables', except that this package declares a single
instance of the table type, while an instantiation of
`GNAT.Dynamic_Tables' creates a type that can be used to define dynamic
instances of the table.


File: gnat_rm.info,  Node: GNAT Task_Lock g-tasloc ads,  Next: GNAT Time_Stamp g-timsta ads,  Prev: GNAT Table g-table ads,  Up: The GNAT Library

12.118 `GNAT.Task_Lock' (`g-tasloc.ads')
========================================

A very simple facility for locking and unlocking sections of code using
a single global task lock.  Appropriate for use in situations where
contention between tasks is very rarely expected.


File: gnat_rm.info,  Node: GNAT Time_Stamp g-timsta ads,  Next: GNAT Threads g-thread ads,  Prev: GNAT Task_Lock g-tasloc ads,  Up: The GNAT Library

12.119 `GNAT.Time_Stamp' (`g-timsta.ads')
=========================================

Provides a simple function that returns a string YYYY-MM-DD HH:MM:SS.SS
that represents the current date and time in ISO 8601 format. This is a
very simple routine with minimal code and there are no dependencies on
any other unit.


File: gnat_rm.info,  Node: GNAT Threads g-thread ads,  Next: GNAT Traceback g-traceb ads,  Prev: GNAT Time_Stamp g-timsta ads,  Up: The GNAT Library

12.120 `GNAT.Threads' (`g-thread.ads')
======================================

Provides facilities for dealing with foreign threads which need to be
known by the GNAT run-time system. Consult the documentation of this
package for further details if your program has threads that are
created by a non-Ada environment which then accesses Ada code.


File: gnat_rm.info,  Node: GNAT Traceback g-traceb ads,  Next: GNAT Traceback Symbolic g-trasym ads,  Prev: GNAT Threads g-thread ads,  Up: The GNAT Library

12.121 `GNAT.Traceback' (`g-traceb.ads')
========================================

Provides a facility for obtaining non-symbolic traceback information,
useful in various debugging situations.


File: gnat_rm.info,  Node: GNAT Traceback Symbolic g-trasym ads,  Next: GNAT UTF_32 g-table ads,  Prev: GNAT Traceback g-traceb ads,  Up: The GNAT Library

12.122 `GNAT.Traceback.Symbolic' (`g-trasym.ads')
=================================================


File: gnat_rm.info,  Node: GNAT UTF_32 g-table ads,  Next: GNAT Wide_Spelling_Checker g-u3spch ads,  Prev: GNAT Traceback Symbolic g-trasym ads,  Up: The GNAT Library

12.123 `GNAT.UTF_32' (`g-table.ads')
====================================

This is a package intended to be used in conjunction with the
`Wide_Character' type in Ada 95 and the `Wide_Wide_Character' type in
Ada 2005 (available in `GNAT' in Ada 2005 mode). This package contains
Unicode categorization routines, as well as lexical categorization
routines corresponding to the Ada 2005 lexical rules for identifiers
and strings, and also a lower case to upper case fold routine
corresponding to the Ada 2005 rules for identifier equivalence.


File: gnat_rm.info,  Node: GNAT Wide_Spelling_Checker g-u3spch ads,  Next: GNAT Wide_Spelling_Checker g-wispch ads,  Prev: GNAT UTF_32 g-table ads,  Up: The GNAT Library

12.124 `GNAT.Wide_Spelling_Checker' (`g-u3spch.ads')
====================================================

Provides a function for determining whether one wide wide string is a
plausible near misspelling of another wide wide string, where the
strings are represented using the UTF_32_String type defined in
System.Wch_Cnv.


File: gnat_rm.info,  Node: GNAT Wide_Spelling_Checker g-wispch ads,  Next: GNAT Wide_String_Split g-wistsp ads,  Prev: GNAT Wide_Spelling_Checker g-u3spch ads,  Up: The GNAT Library

12.125 `GNAT.Wide_Spelling_Checker' (`g-wispch.ads')
====================================================

Provides a function for determining whether one wide string is a
plausible near misspelling of another wide string.


File: gnat_rm.info,  Node: GNAT Wide_String_Split g-wistsp ads,  Next: GNAT Wide_Wide_Spelling_Checker g-zspche ads,  Prev: GNAT Wide_Spelling_Checker g-wispch ads,  Up: The GNAT Library

12.126 `GNAT.Wide_String_Split' (`g-wistsp.ads')
================================================

Useful wide string manipulation routines: given a set of separators,
split a wide string wherever the separators appear, and provide direct
access to the resulting slices. This package is instantiated from
`GNAT.Array_Split'.


File: gnat_rm.info,  Node: GNAT Wide_Wide_Spelling_Checker g-zspche ads,  Next: GNAT Wide_Wide_String_Split g-zistsp ads,  Prev: GNAT Wide_String_Split g-wistsp ads,  Up: The GNAT Library

12.127 `GNAT.Wide_Wide_Spelling_Checker' (`g-zspche.ads')
=========================================================

Provides a function for determining whether one wide wide string is a
plausible near misspelling of another wide wide string.


File: gnat_rm.info,  Node: GNAT Wide_Wide_String_Split g-zistsp ads,  Next: Interfaces C Extensions i-cexten ads,  Prev: GNAT Wide_Wide_Spelling_Checker g-zspche ads,  Up: The GNAT Library

12.128 `GNAT.Wide_Wide_String_Split' (`g-zistsp.ads')
=====================================================

Useful wide wide string manipulation routines: given a set of
separators, split a wide wide string wherever the separators appear,
and provide direct access to the resulting slices. This package is
instantiated from `GNAT.Array_Split'.


File: gnat_rm.info,  Node: Interfaces C Extensions i-cexten ads,  Next: Interfaces C Streams i-cstrea ads,  Prev: GNAT Wide_Wide_String_Split g-zistsp ads,  Up: The GNAT Library

12.129 `Interfaces.C.Extensions' (`i-cexten.ads')
=================================================

This package contains additional C-related definitions, intended for
use with either manually or automatically generated bindings to C
libraries.


File: gnat_rm.info,  Node: Interfaces C Streams i-cstrea ads,  Next: Interfaces Packed_Decimal i-pacdec ads,  Prev: Interfaces C Extensions i-cexten ads,  Up: The GNAT Library

12.130 `Interfaces.C.Streams' (`i-cstrea.ads')
==============================================

This package is a binding for the most commonly used operations on C
streams.


File: gnat_rm.info,  Node: Interfaces Packed_Decimal i-pacdec ads,  Next: Interfaces VxWorks i-vxwork ads,  Prev: Interfaces C Streams i-cstrea ads,  Up: The GNAT Library

12.131 `Interfaces.Packed_Decimal' (`i-pacdec.ads')
===================================================

This package provides a set of routines for conversions to and from a
packed decimal format compatible with that used on IBM mainframes.


File: gnat_rm.info,  Node: Interfaces VxWorks i-vxwork ads,  Next: Interfaces VxWorks IO i-vxwoio ads,  Prev: Interfaces Packed_Decimal i-pacdec ads,  Up: The GNAT Library

12.132 `Interfaces.VxWorks' (`i-vxwork.ads')
============================================

This package provides a limited binding to the VxWorks API.  In
particular, it interfaces with the VxWorks hardware interrupt
facilities.


File: gnat_rm.info,  Node: Interfaces VxWorks IO i-vxwoio ads,  Next: System Address_Image s-addima ads,  Prev: Interfaces VxWorks i-vxwork ads,  Up: The GNAT Library

12.133 `Interfaces.VxWorks.IO' (`i-vxwoio.ads')
===============================================

This package provides a binding to the ioctl (IO/Control) function of
VxWorks, defining a set of option values and function codes. A
particular use of this package is to enable the use of Get_Immediate
under VxWorks.


File: gnat_rm.info,  Node: System Address_Image s-addima ads,  Next: System Assertions s-assert ads,  Prev: Interfaces VxWorks IO i-vxwoio ads,  Up: The GNAT Library

12.134 `System.Address_Image' (`s-addima.ads')
==============================================

This function provides a useful debugging function that gives an
(implementation dependent) string which identifies an address.


File: gnat_rm.info,  Node: System Assertions s-assert ads,  Next: System Atomic_Counters s-atocou ads,  Prev: System Address_Image s-addima ads,  Up: The GNAT Library

12.135 `System.Assertions' (`s-assert.ads')
===========================================

This package provides the declaration of the exception raised by an
run-time assertion failure, as well as the routine that is used
internally to raise this assertion.


File: gnat_rm.info,  Node: System Atomic_Counters s-atocou ads,  Next: System Memory s-memory ads,  Prev: System Assertions s-assert ads,  Up: The GNAT Library

12.136 `System.Atomic_Counters' (`s-atocou.ads')
================================================

This package provides the declaration of an atomic counter type,
together with efficient routines (using hardware synchronization
primitives) for incrementing, decrementing, and testing of these
counters. This package is implemented on most targets, including all
Alpha, ia64, PowerPC, SPARC V9, x86, and x86_64 platforms.


File: gnat_rm.info,  Node: System Memory s-memory ads,  Next: System Multiprocessors s-multip ads,  Prev: System Atomic_Counters s-atocou ads,  Up: The GNAT Library

12.137 `System.Memory' (`s-memory.ads')
=======================================

This package provides the interface to the low level routines used by
the generated code for allocation and freeing storage for the default
storage pool (analogous to the C routines malloc and free.  It also
provides a reallocation interface analogous to the C routine realloc.
The body of this unit may be modified to provide alternative allocation
mechanisms for the default pool, and in addition, direct calls to this
unit may be made for low level allocation uses (for example see the
body of `GNAT.Tables').


File: gnat_rm.info,  Node: System Multiprocessors s-multip ads,  Next: System Multiprocessors Dispatching_Domains s-mudido ads,  Prev: System Memory s-memory ads,  Up: The GNAT Library

12.138 `System.Multiprocessors' (`s-multip.ads')
================================================

This is an Ada 2012 unit defined in the Ada 2012 Reference Manual, but
in GNAT we also make it available in Ada 95 and Ada 2005 (where it is
technically an implementation-defined addition).


File: gnat_rm.info,  Node: System Multiprocessors Dispatching_Domains s-mudido ads,  Next: System Partition_Interface s-parint ads,  Prev: System Multiprocessors s-multip ads,  Up: The GNAT Library

12.139 `System.Multiprocessors.Dispatching_Domains' (`s-mudido.ads')
====================================================================

This is an Ada 2012 unit defined in the Ada 2012 Reference Manual, but
in GNAT we also make it available in Ada 95 and Ada 2005 (where it is
technically an implementation-defined addition).


File: gnat_rm.info,  Node: System Partition_Interface s-parint ads,  Next: System Pool_Global s-pooglo ads,  Prev: System Multiprocessors Dispatching_Domains s-mudido ads,  Up: The GNAT Library

12.140 `System.Partition_Interface' (`s-parint.ads')
====================================================

This package provides facilities for partition interfacing.  It is used
primarily in a distribution context when using Annex E with `GLADE'.


File: gnat_rm.info,  Node: System Pool_Global s-pooglo ads,  Next: System Pool_Local s-pooloc ads,  Prev: System Partition_Interface s-parint ads,  Up: The GNAT Library

12.141 `System.Pool_Global' (`s-pooglo.ads')
============================================

This package provides a storage pool that is equivalent to the default
storage pool used for access types for which no pool is specifically
declared. It uses malloc/free to allocate/free and does not attempt to
do any automatic reclamation.


File: gnat_rm.info,  Node: System Pool_Local s-pooloc ads,  Next: System Restrictions s-restri ads,  Prev: System Pool_Global s-pooglo ads,  Up: The GNAT Library

12.142 `System.Pool_Local' (`s-pooloc.ads')
===========================================

This package provides a storage pool that is intended for use with
locally defined access types. It uses malloc/free for allocate/free,
and maintains a list of allocated blocks, so that all storage allocated
for the pool can be freed automatically when the pool is finalized.


File: gnat_rm.info,  Node: System Restrictions s-restri ads,  Next: System Rident s-rident ads,  Prev: System Pool_Local s-pooloc ads,  Up: The GNAT Library

12.143 `System.Restrictions' (`s-restri.ads')
=============================================

This package provides facilities for accessing at run time the status
of restrictions specified at compile time for the partition.
Information is available both with regard to actual restrictions
specified, and with regard to compiler determined information on which
restrictions are violated by one or more packages in the partition.


File: gnat_rm.info,  Node: System Rident s-rident ads,  Next: System Strings Stream_Ops s-ststop ads,  Prev: System Restrictions s-restri ads,  Up: The GNAT Library

12.144 `System.Rident' (`s-rident.ads')
=======================================

This package provides definitions of the restrictions identifiers
supported by GNAT, and also the format of the restrictions provided in
package System.Restrictions.  It is not normally necessary to `with'
this generic package since the necessary instantiation is included in
package System.Restrictions.


File: gnat_rm.info,  Node: System Strings Stream_Ops s-ststop ads,  Next: System Unsigned_Types s-unstyp ads,  Prev: System Rident s-rident ads,  Up: The GNAT Library

12.145 `System.Strings.Stream_Ops' (`s-ststop.ads')
===================================================

This package provides a set of stream subprograms for standard string
types.  It is intended primarily to support implicit use of such
subprograms when stream attributes are applied to string types, but the
subprograms in this package can be used directly by application
programs.


File: gnat_rm.info,  Node: System Unsigned_Types s-unstyp ads,  Next: System Wch_Cnv s-wchcnv ads,  Prev: System Strings Stream_Ops s-ststop ads,  Up: The GNAT Library

12.146 `System.Unsigned_Types' (`s-unstyp.ads')
===============================================

This package contains definitions of standard unsigned types that
correspond in size to the standard signed types declared in Standard,
and (unlike the types in Interfaces) have corresponding names. It also
contains some related definitions for other specialized types used by
the compiler in connection with packed array types.


File: gnat_rm.info,  Node: System Wch_Cnv s-wchcnv ads,  Next: System Wch_Con s-wchcon ads,  Prev: System Unsigned_Types s-unstyp ads,  Up: The GNAT Library

12.147 `System.Wch_Cnv' (`s-wchcnv.ads')
========================================

This package provides routines for converting between wide and wide
wide characters and a representation as a value of type
`Standard.String', using a specified wide character encoding method.
It uses definitions in package `System.Wch_Con'.


File: gnat_rm.info,  Node: System Wch_Con s-wchcon ads,  Prev: System Wch_Cnv s-wchcnv ads,  Up: The GNAT Library

12.148 `System.Wch_Con' (`s-wchcon.ads')
========================================

This package provides definitions and descriptions of the various
methods used for encoding wide characters in ordinary strings.  These
definitions are used by the package `System.Wch_Cnv'.


File: gnat_rm.info,  Node: Interfacing to Other Languages,  Next: Specialized Needs Annexes,  Prev: The GNAT Library,  Up: Top

13 Interfacing to Other Languages
*********************************

The facilities in Annex B of the Ada Reference Manual are fully
implemented in GNAT, and in addition, a full interface to C++ is
provided.

* Menu:

* Interfacing to C::
* Interfacing to C++::
* Interfacing to COBOL::
* Interfacing to Fortran::
* Interfacing to non-GNAT Ada code::


File: gnat_rm.info,  Node: Interfacing to C,  Next: Interfacing to C++,  Up: Interfacing to Other Languages

13.1 Interfacing to C
=====================

Interfacing to C with GNAT can use one of two approaches:

   * The types in the package `Interfaces.C' may be used.

   * Standard Ada types may be used directly.  This may be less
     portable to other compilers, but will work on all GNAT compilers,
     which guarantee correspondence between the C and Ada types.

Pragma `Convention C' may be applied to Ada types, but mostly has no
effect, since this is the default.  The following table shows the
correspondence between Ada scalar types and the corresponding C types.

Ada Type                     C Type
---------------------------------------------------------------------------------------------------- 
`Integer'                    `int'
`Short_Integer'              `short'
`Short_Short_Integer'        `signed char'
`Long_Integer'               `long'
`Long_Long_Integer'          `long long'
`Short_Float'                `float'
`Float'                      `float'
`Long_Float'                 `double'
`Long_Long_Float'            This is the longest floating-point type supported by the hardware.

Additionally, there are the following general correspondences between
Ada and C types:

   * Ada enumeration types map to C enumeration types directly if pragma
     `Convention C' is specified, which causes them to have int length.
     Without pragma `Convention C', Ada enumeration types map to 8,
     16, or 32 bits (i.e., C types `signed char', `short', `int',
     respectively) depending on the number of values passed.  This is
     the only case in which pragma `Convention C' affects the
     representation of an Ada type.

   * Ada access types map to C pointers, except for the case of
     pointers to unconstrained types in Ada, which have no direct C
     equivalent.

   * Ada arrays map directly to C arrays.

   * Ada records map directly to C structures.

   * Packed Ada records map to C structures where all members are bit
     fields of the length corresponding to the `type'Size' value in Ada.


File: gnat_rm.info,  Node: Interfacing to C++,  Next: Interfacing to COBOL,  Prev: Interfacing to C,  Up: Interfacing to Other Languages

13.2 Interfacing to C++
=======================

The interface to C++ makes use of the following pragmas, which are
primarily intended to be constructed automatically using a binding
generator tool, although it is possible to construct them by hand.

Using these pragmas it is possible to achieve complete
inter-operability between Ada tagged types and C++ class definitions.
See *Note Implementation Defined Pragmas: 7, for more details.

`pragma CPP_Class ([Entity =>] `LOCAL_NAME`)'
     The argument denotes an entity in the current declarative region
     that is declared as a tagged or untagged record type. It indicates
     that the type corresponds to an externally declared C++ class
     type, and is to be laid out the same way that C++ would lay out
     the type.

     Note: Pragma `CPP_Class' is currently obsolete. It is supported
     for backward compatibility but its functionality is available
     using pragma `Import' with `Convention' = `CPP'.

`pragma CPP_Constructor ([Entity =>] `LOCAL_NAME`)'
     This pragma identifies an imported function (imported in the usual
     way with pragma `Import') as corresponding to a C++ constructor.

A few restrictions are placed on the use of the `Access' attribute in
conjunction with subprograms subject to convention `CPP': the attribute
may be used neither on primitive operations of a tagged record type
with convention `CPP', imported or not, nor on subprograms imported
with pragma `CPP_Constructor'.

In addition, C++ exceptions are propagated and can be handled in an
`others' choice of an exception handler. The corresponding Ada
occurrence has no message, and the simple name of the exception identity
contains `Foreign_Exception'. Finalization and awaiting dependent tasks
works properly when such foreign exceptions are propagated.

It is also possible to import a C++ exception using the following
syntax:

    LOCAL_NAME : exception;
    pragma Import (Cpp,
      [Entity =>] LOCAL_NAME,
      [External_Name =>] static_string_EXPRESSION);

The `External_Name' is the name of the C++ RTTI symbol. You can then
cover a specific C++ exception in an exception handler.


File: gnat_rm.info,  Node: Interfacing to COBOL,  Next: Interfacing to Fortran,  Prev: Interfacing to C++,  Up: Interfacing to Other Languages

13.3 Interfacing to COBOL
=========================

Interfacing to COBOL is achieved as described in section B.4 of the Ada
Reference Manual.


File: gnat_rm.info,  Node: Interfacing to Fortran,  Next: Interfacing to non-GNAT Ada code,  Prev: Interfacing to COBOL,  Up: Interfacing to Other Languages

13.4 Interfacing to Fortran
===========================

Interfacing to Fortran is achieved as described in section B.5 of the
Ada Reference Manual.  The pragma `Convention Fortran', applied to a
multi-dimensional array causes the array to be stored in column-major
order as required for convenient interface to Fortran.


File: gnat_rm.info,  Node: Interfacing to non-GNAT Ada code,  Prev: Interfacing to Fortran,  Up: Interfacing to Other Languages

13.5 Interfacing to non-GNAT Ada code
=====================================

It is possible to specify the convention `Ada' in a pragma `Import' or
pragma `Export'.  However this refers to the calling conventions used
by GNAT, which may or may not be similar enough to those used by some
other Ada 83 / Ada 95 / Ada 2005 compiler to allow interoperation.

If arguments types are kept simple, and if the foreign compiler
generally follows system calling conventions, then it may be possible
to integrate files compiled by other Ada compilers, provided that the
elaboration issues are adequately addressed (for example by eliminating
the need for any load time elaboration).

In particular, GNAT running on VMS is designed to be highly compatible
with the DEC Ada 83 compiler, so this is one case in which it is
possible to import foreign units of this type, provided that the data
items passed are restricted to simple scalar values or simple record
types without variants, or simple array types with fixed bounds.


File: gnat_rm.info,  Node: Specialized Needs Annexes,  Next: Implementation of Specific Ada Features,  Prev: Interfacing to Other Languages,  Up: Top

14 Specialized Needs Annexes
****************************

Ada 95, Ada 2005, and Ada 2012 define a number of Specialized Needs
Annexes, which are not required in all implementations.  However, as
described in this chapter, GNAT implements all of these annexes:

`Systems Programming (Annex C)'
     The Systems Programming Annex is fully implemented.

`Real-Time Systems (Annex D)'
     The Real-Time Systems Annex is fully implemented.

`Distributed Systems (Annex E)'
     Stub generation is fully implemented in the GNAT compiler.  In
     addition, a complete compatible PCS is available as part of the
     GLADE system, a separate product.  When the two products are used
     in conjunction, this annex is fully implemented.

`Information Systems (Annex F)'
     The Information Systems annex is fully implemented.

`Numerics (Annex G)'
     The Numerics Annex is fully implemented.

`Safety and Security / High-Integrity Systems (Annex H)'
     The Safety and Security Annex (termed the High-Integrity Systems
     Annex in Ada 2005) is fully implemented.


File: gnat_rm.info,  Node: Implementation of Specific Ada Features,  Next: Implementation of Ada 2012 Features,  Prev: Specialized Needs Annexes,  Up: Top

15 Implementation of Specific Ada Features
******************************************

This chapter describes the GNAT implementation of several Ada language
facilities.

* Menu:

* Machine Code Insertions::
* GNAT Implementation of Tasking::
* GNAT Implementation of Shared Passive Packages::
* Code Generation for Array Aggregates::
* The Size of Discriminated Records with Default Discriminants::
* Strict Conformance to the Ada Reference Manual::


File: gnat_rm.info,  Node: Machine Code Insertions,  Next: GNAT Implementation of Tasking,  Up: Implementation of Specific Ada Features

15.1 Machine Code Insertions
============================

Package `Machine_Code' provides machine code support as described in
the Ada Reference Manual in two separate forms:

   * Machine code statements, consisting of qualified expressions that
     fit the requirements of RM section 13.8.

   * An intrinsic callable procedure, providing an alternative
     mechanism of including machine instructions in a subprogram.

The two features are similar, and both are closely related to the
mechanism provided by the asm instruction in the GNU C compiler.  Full
understanding and use of the facilities in this package requires
understanding the asm instruction, see the section on Extended Asm in
`Using_the_GNU_Compiler_Collection_(GCC)'.

Calls to the function `Asm' and the procedure `Asm' have identical
semantic restrictions and effects as described below.  Both are
provided so that the procedure call can be used as a statement, and the
function call can be used to form a code_statement.

Consider this C `asm' instruction:

    asm ("fsinx %1 %0" : "=f" (result) : "f" (angle));

The equivalent can be written for GNAT as:

    Asm ("fsinx %1 %0",
         My_Float'Asm_Output ("=f", result),
         My_Float'Asm_Input  ("f",  angle));

The first argument to `Asm' is the assembler template, and is identical
to what is used in GNU C.  This string must be a static expression.
The second argument is the output operand list.  It is either a single
`Asm_Output' attribute reference, or a list of such references enclosed
in parentheses (technically an array aggregate of such references).

The `Asm_Output' attribute denotes a function that takes two
parameters.  The first is a string, the second is the name of a variable
of the type designated by the attribute prefix.  The first (string)
argument is required to be a static expression and designates the
constraint (see the section on Constraints in
`Using_the_GNU_Compiler_Collection_(GCC)') for the parameter; e.g.,
what kind of register is required.  The second argument is the variable
to be written or updated with the result.  The possible values for
constraint are the same as those used in the RTL, and are dependent on
the configuration file used to build the GCC back end.  If there are no
output operands, then this argument may either be omitted, or
explicitly given as `No_Output_Operands'.  No support is provided for
GNU C's symbolic names for output parameters.

The second argument of `my_float'Asm_Output' functions as though it
were an `out' parameter, which is a little curious, but all names have
the form of expressions, so there is no syntactic irregularity, even
though normally functions would not be permitted `out' parameters.  The
third argument is the list of input operands.  It is either a single
`Asm_Input' attribute reference, or a list of such references enclosed
in parentheses (technically an array aggregate of such references).

The `Asm_Input' attribute denotes a function that takes two parameters.
The first is a string, the second is an expression of the type
designated by the prefix.  The first (string) argument is required to
be a static expression, and is the constraint for the parameter, (e.g.,
what kind of register is required).  The second argument is the value
to be used as the input argument.  The possible values for the
constraint are the same as those used in the RTL, and are dependent on
the configuration file used to built the GCC back end.  No support is
provided for GNU C's symbolic names for input parameters.

If there are no input operands, this argument may either be omitted, or
explicitly given as `No_Input_Operands'.  The fourth argument, not
present in the above example, is a list of register names, called the
`clobber' argument.  This argument, if given, must be a static string
expression, and is a space or comma separated list of names of registers
that must be considered destroyed as a result of the `Asm' call.  If
this argument is the null string (the default value), then the code
generator assumes that no additional registers are destroyed.  In
addition to registers, the special clobbers `memory' and `cc' as
described in the GNU C docs are both supported.

The fifth argument, not present in the above example, called the
`volatile' argument, is by default `False'.  It can be set to the
literal value `True' to indicate to the code generator that all
optimizations with respect to the instruction specified should be
suppressed, and in particular an instruction that has outputs will
still be generated, even if none of the outputs are used.  See
`Using_the_GNU_Compiler_Collection_(GCC)' for the full description.
Generally it is strongly advisable to use Volatile for any ASM statement
that is missing either input or output operands or to avoid unwanted
optimizations. A warning is generated if this advice is not followed.

No support is provided for GNU C's `asm goto' feature.

The `Asm' subprograms may be used in two ways.  First the procedure
forms can be used anywhere a procedure call would be valid, and
correspond to what the RM calls 'intrinsic' routines.  Such calls can
be used to intersperse machine instructions with other Ada statements.
Second, the function forms, which return a dummy value of the limited
private type `Asm_Insn', can be used in code statements, and indeed
this is the only context where such calls are allowed.  Code statements
appear as aggregates of the form:

    Asm_Insn'(Asm (...));
    Asm_Insn'(Asm_Volatile (...));

In accordance with RM rules, such code statements are allowed only
within subprograms whose entire body consists of such statements.  It is
not permissible to intermix such statements with other Ada statements.

Typically the form using intrinsic procedure calls is more convenient
and more flexible.  The code statement form is provided to meet the RM
suggestion that such a facility should be made available.  The following
is the exact syntax of the call to `Asm'. As usual, if named notation
is used, the arguments may be given in arbitrary order, following the
normal rules for use of positional and named arguments:

    ASM_CALL ::= Asm (
                     [Template =>] static_string_EXPRESSION
                   [,[Outputs  =>] OUTPUT_OPERAND_LIST      ]
                   [,[Inputs   =>] INPUT_OPERAND_LIST       ]
                   [,[Clobber  =>] static_string_EXPRESSION ]
                   [,[Volatile =>] static_boolean_EXPRESSION] )

    OUTPUT_OPERAND_LIST ::=
      [PREFIX.]No_Output_Operands
    | OUTPUT_OPERAND_ATTRIBUTE
    | (OUTPUT_OPERAND_ATTRIBUTE {,OUTPUT_OPERAND_ATTRIBUTE})

    OUTPUT_OPERAND_ATTRIBUTE ::=
      SUBTYPE_MARK'Asm_Output (static_string_EXPRESSION, NAME)

    INPUT_OPERAND_LIST ::=
      [PREFIX.]No_Input_Operands
    | INPUT_OPERAND_ATTRIBUTE
    | (INPUT_OPERAND_ATTRIBUTE {,INPUT_OPERAND_ATTRIBUTE})

    INPUT_OPERAND_ATTRIBUTE ::=
      SUBTYPE_MARK'Asm_Input (static_string_EXPRESSION, EXPRESSION)

The identifiers `No_Input_Operands' and `No_Output_Operands' are
declared in the package `Machine_Code' and must be referenced according
to normal visibility rules. In particular if there is no `use' clause
for this package, then appropriate package name qualification is
required.


File: gnat_rm.info,  Node: GNAT Implementation of Tasking,  Next: GNAT Implementation of Shared Passive Packages,  Prev: Machine Code Insertions,  Up: Implementation of Specific Ada Features

15.2 GNAT Implementation of Tasking
===================================

This chapter outlines the basic GNAT approach to tasking (in particular,
a multi-layered library for portability) and discusses issues related
to compliance with the Real-Time Systems Annex.

* Menu:

* Mapping Ada Tasks onto the Underlying Kernel Threads::
* Ensuring Compliance with the Real-Time Annex::


File: gnat_rm.info,  Node: Mapping Ada Tasks onto the Underlying Kernel Threads,  Next: Ensuring Compliance with the Real-Time Annex,  Up: GNAT Implementation of Tasking

15.2.1 Mapping Ada Tasks onto the Underlying Kernel Threads
-----------------------------------------------------------

GNAT's run-time support comprises two layers:

   * GNARL (GNAT Run-time Layer)

   * GNULL (GNAT Low-level Library)

In GNAT, Ada's tasking services rely on a platform and OS independent
layer known as GNARL.  This code is responsible for implementing the
correct semantics of Ada's task creation, rendezvous, protected
operations etc.

GNARL decomposes Ada's tasking semantics into simpler lower level
operations such as create a thread, set the priority of a thread,
yield, create a lock, lock/unlock, etc.  The spec for these low-level
operations constitutes GNULLI, the GNULL Interface.  This interface is
directly inspired from the POSIX real-time API.

If the underlying executive or OS implements the POSIX standard
faithfully, the GNULL Interface maps as is to the services offered by
the underlying kernel.  Otherwise, some target dependent glue code maps
the services offered by the underlying kernel to the semantics expected
by GNARL.

Whatever the underlying OS (VxWorks, UNIX, Windows, etc.) the key point
is that each Ada task is mapped on a thread in the underlying kernel.
For example, in the case of VxWorks, one Ada task = one VxWorks task.

In addition Ada task priorities map onto the underlying thread
priorities.  Mapping Ada tasks onto the underlying kernel threads has
several advantages:

   * The underlying scheduler is used to schedule the Ada tasks.  This
     makes Ada tasks as efficient as kernel threads from a scheduling
     standpoint.

   * Interaction with code written in C containing threads is eased
     since at the lowest level Ada tasks and C threads map onto the same
     underlying kernel concept.

   * When an Ada task is blocked during I/O the remaining Ada tasks are
     able to proceed.

   * On multiprocessor systems Ada tasks can execute in parallel.

Some threads libraries offer a mechanism to fork a new process, with the
child process duplicating the threads from the parent.  GNAT does not
support this functionality when the parent contains more than one task.
.. index:: Forking a new process


File: gnat_rm.info,  Node: Ensuring Compliance with the Real-Time Annex,  Prev: Mapping Ada Tasks onto the Underlying Kernel Threads,  Up: GNAT Implementation of Tasking

15.2.2 Ensuring Compliance with the Real-Time Annex
---------------------------------------------------

Although mapping Ada tasks onto the underlying threads has significant
advantages, it does create some complications when it comes to
respecting the scheduling semantics specified in the real-time annex
(Annex D).

For instance the Annex D requirement for the `FIFO_Within_Priorities'
scheduling policy states:

     `When the active priority of a ready task that is not running
     changes, or the setting of its base priority takes effect, the
     task is removed from the ready queue for its old active priority
     and is added at the tail of the ready queue for its new active
     priority, except in the case where the active priority is lowered
     due to the loss of inherited priority, in which case the task is
     added at the head of the ready queue for its new active priority.'

While most kernels do put tasks at the end of the priority queue when a
task changes its priority, (which respects the main
FIFO_Within_Priorities requirement), almost none keep a thread at the
beginning of its priority queue when its priority drops from the loss
of inherited priority.

As a result most vendors have provided incomplete Annex D
implementations.

The GNAT run-time, has a nice cooperative solution to this problem
which ensures that accurate FIFO_Within_Priorities semantics are
respected.

The principle is as follows.  When an Ada task T is about to start
running, it checks whether some other Ada task R with the same priority
as T has been suspended due to the loss of priority inheritance.  If
this is the case, T yields and is placed at the end of its priority
queue.  When R arrives at the front of the queue it executes.

Note that this simple scheme preserves the relative order of the tasks
that were ready to execute in the priority queue where R has been
placed at the end.


File: gnat_rm.info,  Node: GNAT Implementation of Shared Passive Packages,  Next: Code Generation for Array Aggregates,  Prev: GNAT Implementation of Tasking,  Up: Implementation of Specific Ada Features

15.3 GNAT Implementation of Shared Passive Packages
===================================================

GNAT fully implements the pragma `Shared_Passive' for .. index:: pragma
`Shared_Passive'

the purpose of designating shared passive packages.  This allows the
use of passive partitions in the context described in the Ada Reference
Manual; i.e., for communication between separate partitions of a
distributed application using the features in Annex E.  .. index::
Annex E

However, the implementation approach used by GNAT provides for more
extensive usage as follows:

`Communication between separate programs'
     This allows separate programs to access the data in passive
     partitions, using protected objects for synchronization where
     needed. The only requirement is that the two programs have a
     common shared file system. It is even possible for programs
     running on different machines with different architectures (e.g.,
     different endianness) to communicate via the data in a passive
     partition.

`Persistence between program runs'
     The data in a passive package can persist from one run of a
     program to another, so that a later program sees the final values
     stored by a previous run of the same program.

The implementation approach used is to store the data in files. A
separate stream file is created for each object in the package, and an
access to an object causes the corresponding file to be read or written.

The environment variable `SHARED_MEMORY_DIRECTORY' should be set to the
directory to be used for these files.  The files in this directory have
names that correspond to their fully qualified names. For example, if
we have the package

    package X is
      pragma Shared_Passive (X);
      Y : Integer;
      Z : Float;
    end X;

and the environment variable is set to `/stemp/', then the files created
will have the names:

    /stemp/x.y
    /stemp/x.z

These files are created when a value is initially written to the
object, and the files are retained until manually deleted. This
provides the persistence semantics. If no file exists, it means that no
partition has assigned a value to the variable; in this case the
initial value declared in the package will be used. This model ensures
that there are no issues in synchronizing the elaboration process,
since elaboration of passive packages elaborates the initial values,
but does not create the files.

The files are written using normal `Stream_IO' access.  If you want to
be able to communicate between programs or partitions running on
different architectures, then you should use the XDR versions of the
stream attribute routines, since these are architecture independent.

If active synchronization is required for access to the variables in the
shared passive package, then as described in the Ada Reference Manual,
the package may contain protected objects used for this purpose. In
this case a lock file (whose name is `___lock' (three underscores) is
created in the shared memory directory.

This is used to provide the required locking semantics for proper
protected object synchronization.

GNAT supports shared passive packages on all platforms except for
OpenVMS.


File: gnat_rm.info,  Node: Code Generation for Array Aggregates,  Next: The Size of Discriminated Records with Default Discriminants,  Prev: GNAT Implementation of Shared Passive Packages,  Up: Implementation of Specific Ada Features

15.4 Code Generation for Array Aggregates
=========================================

Aggregates have a rich syntax and allow the user to specify the values
of complex data structures by means of a single construct.  As a
result, the code generated for aggregates can be quite complex and
involve loops, case statements and multiple assignments.  In the
simplest cases, however, the compiler will recognize aggregates whose
components and constraints are fully static, and in those cases the
compiler will generate little or no executable code.  The following is
an outline of the code that GNAT generates for various aggregate
constructs.  For further details, you will find it useful to examine
the output produced by the -gnatG flag to see the expanded source that
is input to the code generator.  You may also want to examine the
assembly code generated at various levels of optimization.

The code generated for aggregates depends on the context, the component
values, and the type.  In the context of an object declaration the code
generated is generally simpler than in the case of an assignment.  As a
general rule, static component values and static subtypes also lead to
simpler code.

* Menu:

* Static constant aggregates with static bounds::
* Constant aggregates with unconstrained nominal types::
* Aggregates with static bounds::
* Aggregates with non-static bounds::
* Aggregates in assignment statements::


File: gnat_rm.info,  Node: Static constant aggregates with static bounds,  Next: Constant aggregates with unconstrained nominal types,  Up: Code Generation for Array Aggregates

15.4.1 Static constant aggregates with static bounds
----------------------------------------------------

For the declarations:

    type One_Dim is array (1..10) of integer;
    ar0 : constant One_Dim := (1, 2, 3, 4, 5, 6, 7, 8, 9, 0);

GNAT generates no executable code: the constant ar0 is placed in static
memory.  The same is true for constant aggregates with named
associations:

    Cr1 : constant One_Dim := (4 => 16, 2 => 4, 3 => 9, 1 => 1, 5 .. 10 => 0);
    Cr3 : constant One_Dim := (others => 7777);

The same is true for multidimensional constant arrays such as:

    type two_dim is array (1..3, 1..3) of integer;
    Unit : constant two_dim := ( (1,0,0), (0,1,0), (0,0,1));

The same is true for arrays of one-dimensional arrays: the following are
static:

    type ar1b  is array (1..3) of boolean;
    type ar_ar is array (1..3) of ar1b;
    None  : constant ar1b := (others => false);     --  fully static
    None2 : constant ar_ar := (1..3 => None);       --  fully static

However, for multidimensional aggregates with named associations, GNAT
will generate assignments and loops, even if all associations are
static.  The following two declarations generate a loop for the first
dimension, and individual component assignments for the second
dimension:

    Zero1: constant two_dim := (1..3 => (1..3 => 0));
    Zero2: constant two_dim := (others => (others => 0));


File: gnat_rm.info,  Node: Constant aggregates with unconstrained nominal types,  Next: Aggregates with static bounds,  Prev: Static constant aggregates with static bounds,  Up: Code Generation for Array Aggregates

15.4.2 Constant aggregates with unconstrained nominal types
-----------------------------------------------------------

In such cases the aggregate itself establishes the subtype, so that
associations with `others' cannot be used.  GNAT determines the bounds
for the actual subtype of the aggregate, and allocates the aggregate
statically as well.  No code is generated for the following:

    type One_Unc is array (natural range <>) of integer;
    Cr_Unc : constant One_Unc := (12,24,36);


File: gnat_rm.info,  Node: Aggregates with static bounds,  Next: Aggregates with non-static bounds,  Prev: Constant aggregates with unconstrained nominal types,  Up: Code Generation for Array Aggregates

15.4.3 Aggregates with static bounds
------------------------------------

In all previous examples the aggregate was the initial (and immutable)
value of a constant.  If the aggregate initializes a variable, then
code is generated for it as a combination of individual assignments and
loops over the target object.  The declarations

    Cr_Var1 : One_Dim := (2, 5, 7, 11, 0, 0, 0, 0, 0, 0);
    Cr_Var2 : One_Dim := (others > -1);

generate the equivalent of

    Cr_Var1 (1) := 2;
    Cr_Var1 (2) := 3;
    Cr_Var1 (3) := 5;
    Cr_Var1 (4) := 11;

    for I in Cr_Var2'range loop
       Cr_Var2 (I) := -1;
    end loop;


File: gnat_rm.info,  Node: Aggregates with non-static bounds,  Next: Aggregates in assignment statements,  Prev: Aggregates with static bounds,  Up: Code Generation for Array Aggregates

15.4.4 Aggregates with non-static bounds
----------------------------------------

If the bounds of the aggregate are not statically compatible with the
bounds of the nominal subtype  of the target, then constraint checks
have to be generated on the bounds.  For a multidimensional array,
constraint checks may have to be applied to sub-arrays individually, if
they do not have statically compatible subtypes.


File: gnat_rm.info,  Node: Aggregates in assignment statements,  Prev: Aggregates with non-static bounds,  Up: Code Generation for Array Aggregates

15.4.5 Aggregates in assignment statements
------------------------------------------

In general, aggregate assignment requires the construction of a
temporary, and a copy from the temporary to the target of the
assignment.  This is because it is not always possible to convert the
assignment into a series of individual component assignments.  For
example, consider the simple case:

    A := (A(2), A(1));

This cannot be converted into:

    A(1) := A(2);
    A(2) := A(1);

So the aggregate has to be built first in a separate location, and then
copied into the target.  GNAT recognizes simple cases where this
intermediate step is not required, and the assignments can be performed
in place, directly into the target.  The following sufficient criteria
are applied:

   * The bounds of the aggregate are static, and the associations are
     static.

   * The components of the aggregate are static constants, names of
     simple variables that are not renamings, or expressions not
     involving indexed components whose operands obey these rules.

If any of these conditions are violated, the aggregate will be built in
a temporary (created either by the front-end or the code generator) and
then that temporary will be copied onto the target.


File: gnat_rm.info,  Node: The Size of Discriminated Records with Default Discriminants,  Next: Strict Conformance to the Ada Reference Manual,  Prev: Code Generation for Array Aggregates,  Up: Implementation of Specific Ada Features

15.5 The Size of Discriminated Records with Default Discriminants
=================================================================

If a discriminated type `T' has discriminants with default values, it is
possible to declare an object of this type without providing an explicit
constraint:

    type Size is range 1..100;

    type Rec (D : Size := 15) is record
       Name : String (1..D);
    end T;

    Word : Rec;

Such an object is said to be `unconstrained'.  The discriminant of the
object can be modified by a full assignment to the object, as long as
it preserves the relation between the value of the discriminant, and
the value of the components that depend on it:

    Word := (3, "yes");

    Word := (5, "maybe");

    Word := (5, "no"); -- raises Constraint_Error

In order to support this behavior efficiently, an unconstrained object
is given the maximum size that any value of the type requires. In the
case above, `Word' has storage for the discriminant and for a `String'
of length 100.  It is important to note that unconstrained objects do
not require dynamic allocation. It would be an improper implementation
to place on the heap those components whose size depends on
discriminants. (This improper implementation was used by some Ada83
compilers, where the `Name' component above would have been stored as a
pointer to a dynamic string). Following the principle that dynamic
storage management should never be introduced implicitly, an Ada
compiler should reserve the full size for an unconstrained declared
object, and place it on the stack.

This maximum size approach has been a source of surprise to some users,
who expect the default values of the discriminants to determine the
size reserved for an unconstrained object: "If the default is 15, why
should the object occupy a larger size?"  The answer, of course, is
that the discriminant may be later modified, and its full range of
values must be taken into account. This is why the declaration:

    type Rec (D : Positive := 15) is record
       Name : String (1..D);
    end record;

    Too_Large : Rec;

is flagged by the compiler with a warning: an attempt to create
`Too_Large' will raise `Storage_Error', because the required size
includes `Positive'Last' bytes. As the first example indicates, the
proper approach is to declare an index type of 'reasonable' range so
that unconstrained objects are not too large.

One final wrinkle: if the object is declared to be `aliased', or if it
is created in the heap by means of an allocator, then it is `not'
unconstrained: it is constrained by the default values of the
discriminants, and those values cannot be modified by full assignment.
This is because in the presence of aliasing all views of the object
(which may be manipulated by different tasks, say) must be consistent,
so it is imperative that the object, once created, remain invariant.


File: gnat_rm.info,  Node: Strict Conformance to the Ada Reference Manual,  Prev: The Size of Discriminated Records with Default Discriminants,  Up: Implementation of Specific Ada Features

15.6 Strict Conformance to the Ada Reference Manual
===================================================

The dynamic semantics defined by the Ada Reference Manual impose a set
of run-time checks to be generated. By default, the GNAT compiler will
insert many run-time checks into the compiled code, including most of
those required by the Ada Reference Manual. However, there are three
checks that are not enabled in the default mode for efficiency reasons:
arithmetic overflow checking for integer operations (including division
by zero), checks for access before elaboration on subprogram calls, and
stack overflow checking (most operating systems do not perform this
check by default).

Strict conformance to the Ada Reference Manual can be achieved by adding
three compiler options for overflow checking for integer operations
(`-gnato'), dynamic checks for access-before-elaboration on subprogram
calls and generic instantiations (`-gnatE'), and stack overflow
checking (`-fstack-check').

Note that the result of a floating point arithmetic operation in
overflow and invalid situations, when the `Machine_Overflows' attribute
of the result type is `False', is to generate IEEE NaN and infinite
values. This is the case for machines compliant with the IEEE
floating-point standard, but on machines that are not fully compliant
with this standard, such as Alpha, the `-mieee' compiler flag must be
used for achieving IEEE confirming behavior (although at the cost of a
significant performance penalty), so infinite and NaN values are
properly generated.


File: gnat_rm.info,  Node: Implementation of Ada 2012 Features,  Next: Obsolescent Features,  Prev: Implementation of Specific Ada Features,  Up: Top

16 Implementation of Ada 2012 Features
**************************************

This chapter contains a complete list of Ada 2012 features that have
been implemented.  Generally, these features are only available if the
`-gnat12' (Ada 2012 features enabled) option is set, which is the
default behavior, or if the configuration pragma `Ada_2012' is used.

However, new pragmas, attributes, and restrictions are unconditionally
available, since the Ada 95 standard allows the addition of new
pragmas, attributes, and restrictions (there are exceptions, which are
documented in the individual descriptions), and also certain packages
were made available in earlier versions of Ada.

An ISO date (YYYY-MM-DD) appears in parentheses on the description line.
This date shows the implementation date of the feature. Any wavefront
subsequent to this date will contain the indicated feature, as will any
subsequent releases. A date of 0000-00-00 means that GNAT has always
implemented the feature, or implemented it as soon as it appeared as a
binding interpretation.

Each feature corresponds to an Ada Issue ('AI') approved by the Ada
standardization group (ISO/IEC JTC1/SC22/WG9) for inclusion in Ada 2012.
The features are ordered based on the relevant sections of the Ada
Reference Manual ("RM").  When a given AI relates to multiple points in
the RM, the earliest is used.

A complete description of the AIs may be found in
<http://www.ada-auth.org/ai05-summary.html>.

   * `AI-0176 Quantified expressions (2010-09-29)'

     Both universally and existentially quantified expressions are
     implemented.  They use the new syntax for iterators proposed in
     AI05-139-2, as well as the standard Ada loop syntax.

     RM References:  1.01.04 (12)   2.09 (2/2)   4.04 (7)   4.05.09 (0)

   * `AI-0079 Allow other_format characters in source (2010-07-10)'

     Wide characters in the unicode category `other_format' are now
     allowed in source programs between tokens, but not within a token
     such as an identifier.

     RM References:  2.01 (4/2)   2.02 (7)

   * `AI-0091 Do not allow other_format in identifiers (0000-00-00)'

     Wide characters in the unicode category `other_format' are not
     permitted within  an identifier, since this can be a security
     problem. The error message for this case has been improved to be
     more specific, but GNAT has never allowed such characters to
     appear in identifiers.

     RM References:  2.03 (3.1/2)   2.03 (4/2)   2.03 (5/2)   2.03
     (5.1/2)   2.03 (5.2/2)   2.03 (5.3/2)   2.09 (2/2)

   * `AI-0100 Placement of pragmas  (2010-07-01)'

     This AI is an earlier version of AI-163. It simplifies the rules
     for legal placement of pragmas. In the case of lists that allow
     pragmas, if the list may have no elements, then the list may
     consist solely of pragmas.

     RM References:  2.08 (7)

   * `AI-0163 Pragmas in place of null (2010-07-01)'

     A statement sequence may be composed entirely of pragmas. It is no
     longer necessary to add a dummy `null' statement to make the
     sequence legal.

     RM References:  2.08 (7)   2.08 (16)

   * `AI-0080 'View of' not needed if clear from context (0000-00-00)'

     This is an editorial change only, described as non-testable in the
     AI.

     RM References:  3.01 (7)

   * `AI-0183 Aspect specifications (2010-08-16)'

     Aspect specifications have been fully implemented except for pre
     and post- conditions, and type invariants, which have their own
     separate AI's. All forms of declarations listed in the AI are
     supported. The following is a list of the aspects supported (with
     GNAT implementation aspects marked)

Supported Aspect                       Source
------------------------------------------------------- 
`Ada_2005'                             - GNAT
`Ada_2012'                             - GNAT
`Address'                              
`Alignment'                            
`Atomic'                               
`Atomic_Components'                    
`Bit_Order'                            
`Component_Size'                       
`Contract_Cases'                       - GNAT
`Discard_Names'                        
`External_Tag'                         
`Favor_Top_Level'                      - GNAT
`Inline'                               
`Inline_Always'                        - GNAT
`Invariant'                            - GNAT
`Machine_Radix'                        
`No_Return'                            
`Object_Size'                          - GNAT
`Pack'                                 
`Persistent_BSS'                       - GNAT
`Post'                                 
`Pre'                                  
`Predicate'                            
`Preelaborable_Initialization'         
`Pure_Function'                        - GNAT
`Remote_Access_Type'                   - GNAT
`Shared'                               - GNAT
`Size'                                 
`Storage_Pool'                         
`Storage_Size'                         
`Stream_Size'                          
`Suppress'                             
`Suppress_Debug_Info'                  - GNAT
`Test_Case'                            - GNAT
`Thread_Local_Storage'                 - GNAT
`Type_Invariant'                       
`Unchecked_Union'                      
`Universal_Aliasing'                   - GNAT
`Unmodified'                           - GNAT
`Unreferenced'                         - GNAT
`Unreferenced_Objects'                 - GNAT
`Unsuppress'                           
`Value_Size'                           - GNAT
`Volatile'                             
`Volatile_Components'                  
`Warnings'                             - GNAT

     Note that for aspects with an expression, e.g. `Size', the
     expression is treated like a default expression (visibility is
     analyzed at the point of occurrence of the aspect, but evaluation
     of the expression occurs at the freeze point of the entity
     involved).

     RM References:  3.02.01 (3)   3.02.02 (2)   3.03.01 (2/2)   3.08
     (6) 3.09.03 (1.1/2)   6.01 (2/2)   6.07 (2/2)   9.05.02 (2/2)
     7.01 (3)   7.03 (2)   7.03 (3)   9.01 (2/2)   9.01 (3/2)   9.04
     (2/2)   9.04 (3/2) 9.05.02 (2/2)   11.01 (2)   12.01 (3)   12.03
     (2/2)   12.04 (2/2)   12.05 (2) 12.06 (2.1/2)   12.06 (2.2/2)
     12.07 (2)   13.01 (0.1/2)   13.03 (5/1) 13.03.01 (0)

   * `AI-0128 Inequality is a primitive operation (0000-00-00)'

     If an equality operator ("=") is declared for a type, then the
     implicitly declared inequality operator ("/=") is a primitive
     operation of the type.  This is the only reasonable
     interpretation, and is the one always implemented by GNAT, but the
     RM was not entirely clear in making this point.

     RM References:  3.02.03 (6)   6.06 (6)

   * `AI-0003 Qualified expressions as names (2010-07-11)'

     In Ada 2012, a qualified expression is considered to be
     syntactically a name, meaning that constructs such as `A'(F(X)).B'
     are now legal. This is useful in disambiguating some cases of
     overloading.

     RM References:  3.03 (11)   3.03 (21)   4.01 (2)   4.04 (7)   4.07
     (3) 5.04 (7)

   * `AI-0120 Constant instance of protected object (0000-00-00)'

     This is an RM editorial change only. The section that lists
     objects that are constant failed to include the current instance
     of a protected object within a protected function. This has always
     been treated as a constant in GNAT.

     RM References:  3.03 (21)

   * `AI-0008 General access to constrained objects (0000-00-00)'

     The wording in the RM implied that if you have a general access to
     a constrained object, it could be used to modify the
     discriminants. This was obviously not intended. `Constraint_Error'
     should be raised, and GNAT has always done so in this situation.

     RM References:  3.03 (23)   3.10.02 (26/2)   4.01 (9)   6.04.01
     (17)   8.05.01 (5/2)

   * `AI-0093 Additional rules use immutably limited (0000-00-00)'

     This is an editorial change only, to make more widespread use of
     the Ada 2012 'immutably limited'.

     RM References:  3.03 (23.4/3)

   * `AI-0096 Deriving from formal private types (2010-07-20)'

     In general it is illegal for a type derived from a formal limited
     type to be nonlimited.  This AI makes an exception to this rule:
     derivation is legal if it appears in the private part of the
     generic, and the formal type is not tagged. If the type is tagged,
     the legality check must be applied to the private part of the
     package.

     RM References:  3.04 (5.1/2)   6.02 (7)

   * `AI-0181 Soft hyphen is a non-graphic character (2010-07-23)'

     From Ada 2005 on, soft hyphen is considered a non-graphic
     character, which means that it has a special name (`SOFT_HYPHEN')
     in conjunction with the `Image' and `Value' attributes for the
     character types. Strictly speaking this is an inconsistency with
     Ada 95, but in practice the use of these attributes is so obscure
     that it will not cause problems.

     RM References:  3.05.02 (2/2)   A.01 (35/2)   A.03.03 (21)

   * `AI-0182 Additional forms for `Character'Value' (0000-00-00)`

     This AI allows `Character'Value' to accept the string `'?'' where
     `?' is any character including non-graphic control characters.
     GNAT has always accepted such strings. It also allows strings such
     as `HEX_00000041' to be accepted, but GNAT does not take advantage
     of this permission and raises `Constraint_Error', as is certainly
     still permitted.

     RM References:  3.05 (56/2)

   * `AI-0214 Defaulted discriminants for limited tagged (2010-10-01)'

     Ada 2012 relaxes the restriction that forbids discriminants of
     tagged types to have default expressions by allowing them when the
     type is limited. It is often useful to define a default value for
     a discriminant even though it can't be changed by assignment.

     RM References:  3.07 (9.1/2)   3.07.02 (3)

   * `AI-0102 Some implicit conversions are illegal (0000-00-00)'

     It is illegal to assign an anonymous access constant to an
     anonymous access variable. The RM did not have a clear rule to
     prevent this, but GNAT has always generated an error for this
     usage.

     RM References:  3.07 (16)   3.07.01 (9)   6.04.01 (6)   8.06 (27/2)

   * `AI-0158 Generalizing membership tests (2010-09-16)'

     This AI extends the syntax of membership tests to simplify complex
     conditions that can be expressed as membership in a subset of
     values of any type. It introduces syntax for a list of expressions
     that may be used in loop contexts as well.

     RM References:  3.08.01 (5)   4.04 (3)   4.05.02 (3)   4.05.02 (5)
      4.05.02 (27)

   * `AI-0173 Testing if tags represent abstract types (2010-07-03)'

     The function `Ada.Tags.Type_Is_Abstract' returns `True' if invoked
     with the tag of an abstract type, and `False' otherwise.

     RM References:  3.09 (7.4/2)   3.09 (12.4/2)

   * `AI-0076 function with controlling result (0000-00-00)'

     This is an editorial change only. The RM defines calls with
     controlling results, but uses the term 'function with controlling
     result' without an explicit definition.

     RM References:  3.09.02 (2/2)

   * `AI-0126 Dispatching with no declared operation (0000-00-00)'

     This AI clarifies dispatching rules, and simply confirms that
     dispatching executes the operation of the parent type when there
     is no explicitly or implicitly declared operation for the
     descendant type. This has always been the case in all versions of
     GNAT.

     RM References:  3.09.02 (20/2)   3.09.02 (20.1/2)   3.09.02
     (20.2/2)

   * `AI-0097 Treatment of abstract null extension (2010-07-19)'

     The RM as written implied that in some cases it was possible to
     create an object of an abstract type, by having an abstract
     extension inherit a non- abstract constructor from its parent
     type. This mistake has been corrected in GNAT and in the RM, and
     this construct is now illegal.

     RM References:  3.09.03 (4/2)

   * `AI-0203 Extended return cannot be abstract (0000-00-00)'

     A return_subtype_indication cannot denote an abstract subtype.
     GNAT has never permitted such usage.

     RM References:  3.09.03 (8/3)

   * `AI-0198 Inheriting abstract operators  (0000-00-00)'

     This AI resolves a conflict between two rules involving inherited
     abstract operations and predefined operators. If a derived numeric
     type inherits an abstract operator, it overrides the predefined
     one. This interpretation was always the one implemented in GNAT.

     RM References:  3.09.03 (4/3)

   * `AI-0073 Functions returning abstract types (2010-07-10)'

     This AI covers a number of issues regarding returning abstract
     types. In particular generic functions cannot have abstract result
     types or access result types designated an abstract type. There
     are some other cases which are detailed in the AI. Note that this
     binding interpretation has not been retrofitted to operate before
     Ada 2012 mode, since it caused a significant number of regressions.

     RM References:  3.09.03 (8)   3.09.03 (10)   6.05 (8/2)

   * `AI-0070 Elaboration of interface types (0000-00-00)'

     This is an editorial change only, there are no testable
     consequences short of checking for the absence of generated code
     for an interface declaration.

     RM References:  3.09.04 (18/2)

   * `AI-0208 Characteristics of incomplete views (0000-00-00)'

     The wording in the Ada 2005 RM concerning characteristics of
     incomplete views was incorrect and implied that some programs
     intended to be legal were now illegal. GNAT had never considered
     such programs illegal, so it has always implemented the intent of
     this AI.

     RM References:  3.10.01 (2.4/2)   3.10.01 (2.6/2)

   * `AI-0162 Incomplete type completed by partial view (2010-09-15)'

     Incomplete types are made more useful by allowing them to be
     completed by private types and private extensions.

     RM References:  3.10.01 (2.5/2)   3.10.01 (2.6/2)   3.10.01 (3)
     3.10.01 (4/2)

   * `AI-0098 Anonymous subprogram access restrictions (0000-00-00)'

     An unintentional omission in the RM implied some inconsistent
     restrictions on the use of anonymous access to subprogram values.
     These restrictions were not intentional, and have never been
     enforced by GNAT.

     RM References:  3.10.01 (6)   3.10.01 (9.2/2)

   * `AI-0199 Aggregate with anonymous access components (2010-07-14)'

     A choice list in a record aggregate can include several components
     of (distinct) anonymous access types as long as they have matching
     designated subtypes.

     RM References:  4.03.01 (16)

   * `AI-0220 Needed components for aggregates (0000-00-00)'

     This AI addresses a wording problem in the RM that appears to
     permit some complex cases of aggregates with non-static
     discriminants. GNAT has always implemented the intended semantics.

     RM References:  4.03.01 (17)

   * `AI-0147 Conditional expressions (2009-03-29)'

     Conditional expressions are permitted. The form of such an
     expression is:

         (if expr then expr {elsif expr then expr} [else expr])

     The parentheses can be omitted in contexts where parentheses are
     present anyway, such as subprogram arguments and pragma arguments.
     If the `else' clause is omitted, `else' `True' is assumed; thus
     `(if A then B)' is a way to conveniently represent `(A implies B)'
     in standard logic.

     RM References:  4.03.03 (15)   4.04 (1)   4.04 (7)   4.05.07 (0)
     4.07 (2) 4.07 (3)   4.09 (12)   4.09 (33)   5.03 (3)   5.03 (4)
     7.05 (2.1/2)

   * `AI-0037 Out-of-range box associations in aggregate (0000-00-00)'

     This AI confirms that an association of the form `Indx => <>' in an
     array aggregate must raise `Constraint_Error' if `Indx' is out of
     range. The RM specified a range check on other associations, but
     not when the value of the association was defaulted. GNAT has
     always inserted a constraint check on the index value.

     RM References:  4.03.03 (29)

   * `AI-0123 Composability of equality (2010-04-13)'

     Equality of untagged record composes, so that the predefined
     equality for a composite type that includes a component of some
     untagged record type `R' uses the equality operation of `R' (which
     may be user-defined or predefined). This makes the behavior of
     untagged records identical to that of tagged types in this respect.

     This change is an incompatibility with previous versions of Ada,
     but it corrects a non-uniformity that was often a source of
     confusion. Analysis of a large number of industrial programs
     indicates that in those rare cases where a composite type had an
     untagged record component with a user-defined equality, either
     there was no use of the composite equality, or else the code
     expected the same composability as for tagged types, and thus had
     a bug that would be fixed by this change.

     RM References:  4.05.02 (9.7/2)   4.05.02 (14)   4.05.02 (15)
     4.05.02 (24) 8.05.04 (8)

   * `AI-0088 The value of exponentiation (0000-00-00)'

     This AI clarifies the equivalence rule given for the dynamic
     semantics of exponentiation: the value of the operation can be
     obtained by repeated multiplication, but the operation can be
     implemented otherwise (for example using the familiar
     divide-by-two-and-square algorithm, even if this is less
     accurate), and does not imply repeated reads of a volatile base.

     RM References:  4.05.06 (11)

   * `AI-0188 Case expressions (2010-01-09)'

     Case expressions are permitted. This allows use of constructs such
     as:

         X := (case Y is when 1 => 2, when 2 => 3, when others => 31)

     RM References:  4.05.07 (0)   4.05.08 (0)   4.09 (12)   4.09 (33)

   * `AI-0104 Null exclusion and uninitialized allocator (2010-07-15)'

     The assignment `Ptr := new not null Some_Ptr;' will raise
     `Constraint_Error' because the default value of the allocated
     object is `null'. This useless construct is illegal in Ada 2012.

     RM References:  4.08 (2)

   * `AI-0157 Allocation/Deallocation from empty pool (2010-07-11)'

     Allocation and Deallocation from an empty storage pool (i.e.
     allocation or deallocation of a pointer for which a static storage
     size clause of zero has been given) is now illegal and is detected
     as such. GNAT previously gave a warning but not an error.

     RM References:  4.08 (5.3/2)   13.11.02 (4)   13.11.02 (17)

   * `AI-0179 Statement not required after label (2010-04-10)'

     It is not necessary to have a statement following a label, so a
     label can appear at the end of a statement sequence without the
     need for putting a null statement afterwards, but it is not
     allowable to have only labels and no real statements in a
     statement sequence.

     RM References:  5.01 (2)

   * `AI-0139-2 Syntactic sugar for iterators (2010-09-29)'

     The new syntax for iterating over arrays and containers is now
     implemented.  Iteration over containers is for now limited to
     read-only iterators. Only default iterators are supported, with
     the syntax:  `for Elem of C'.

     RM References:  5.05

   * `AI-0134 Profiles must match for full conformance (0000-00-00)'

     For full conformance, the profiles of
     anonymous-access-to-subprogram parameters must match. GNAT has
     always enforced this rule.

     RM References:  6.03.01 (18)

   * `AI-0207 Mode conformance and access constant (0000-00-00)'

     This AI confirms that access_to_constant indication must match for
     mode conformance. This was implemented in GNAT when the qualifier
     was originally introduced in Ada 2005.

     RM References:  6.03.01 (16/2)

   * `AI-0046 Null exclusion match for full conformance (2010-07-17)'

     For full conformance, in the case of access parameters, the null
     exclusion must match (either both or neither must have `not null').

     RM References:  6.03.02 (18)

   * `AI-0118 The association of parameter associations (0000-00-00)'

     This AI clarifies the rules for named associations in subprogram
     calls and generic instantiations. The rules have been in place
     since Ada 83.

     RM References:  6.04.01 (2)   12.03 (9)

   * `AI-0196 Null exclusion tests for out parameters (0000-00-00)'

     Null exclusion checks are not made for `**out**' parameters when
     evaluating the actual parameters. GNAT has never generated these
     checks.

     RM References:  6.04.01 (13)

   * `AI-0015 Constant return objects (0000-00-00)'

     The return object declared in an `extended_return_statement' may be
     declared constant. This was always intended, and GNAT has always
     allowed it.

     RM References:  6.05 (2.1/2)   3.03 (10/2)   3.03 (21)   6.05 (5/2)
     6.05 (5.7/2)

   * `AI-0032 Extended return for class-wide functions (0000-00-00)'

     If a function returns a class-wide type, the object of an extended
     return statement can be declared with a specific type that is
     covered by the class- wide type. This has been implemented in GNAT
     since the introduction of extended returns. Note AI-0103
     complements this AI by imposing matching rules for constrained
     return types.

     RM References:  6.05 (5.2/2)   6.05 (5.3/2)   6.05 (5.6/2)   6.05
     (5.8/2) 6.05 (8/2)

   * `AI-0103 Static matching for extended return (2010-07-23)'

     If the return subtype of a function is an elementary type or a
     constrained type, the subtype indication in an extended return
     statement must match statically this return subtype.

     RM References:  6.05 (5.2/2)

   * `AI-0058 Abnormal completion of an extended return (0000-00-00)'

     The RM had some incorrect wording implying wrong treatment of
     abnormal completion in an extended return. GNAT has always
     implemented the intended correct semantics as described by this AI.

     RM References:  6.05 (22/2)

   * `AI-0050 Raising Constraint_Error early for function call
     (0000-00-00)'

     The implementation permissions for raising `Constraint_Error'
     early on a function call when it was clear an exception would be
     raised were over-permissive and allowed mishandling of
     discriminants in some cases. GNAT did not take advantage of these
     incorrect permissions in any case.

     RM References:  6.05 (24/2)

   * `AI-0125 Nonoverridable operations of an ancestor (2010-09-28)'

     In Ada 2012, the declaration of a primitive operation of a type
     extension or private extension can also override an inherited
     primitive that is not visible at the point of this declaration.

     RM References:  7.03.01 (6)   8.03 (23)   8.03.01 (5/2)   8.03.01
     (6/2)

   * `AI-0062 Null exclusions and deferred constants (0000-00-00)'

     A full constant may have a null exclusion even if its associated
     deferred constant does not. GNAT has always allowed this.

     RM References:  7.04 (6/2)   7.04 (7.1/2)

   * `AI-0178 Incomplete views are limited (0000-00-00)'

     This AI clarifies the role of incomplete views and plugs an
     omission in the RM. GNAT always correctly restricted the use of
     incomplete views and types.

     RM References:  7.05 (3/2)   7.05 (6/2)

   * `AI-0087 Actual for formal nonlimited derived type (2010-07-15)'

     The actual for a formal nonlimited derived type cannot be limited.
     In particular, a formal derived type that extends a limited
     interface but which is not explicitly limited cannot be
     instantiated with a limited type.

     RM References:  7.05 (5/2)   12.05.01 (5.1/2)

   * `AI-0099 Tag determines whether finalization needed (0000-00-00)'

     This AI clarifies that 'needs finalization' is part of dynamic
     semantics, and therefore depends on the run-time characteristics
     of an object (i.e. its tag) and not on its nominal type. As the AI
     indicates: "we do not expect this to affect any implementation''.

     RM References:  7.06.01 (6)   7.06.01 (7)   7.06.01 (8)   7.06.01
     (9/2)

   * `AI-0064 Redundant finalization rule (0000-00-00)'

     This is an editorial change only. The intended behavior is already
     checked by an existing ACATS test, which GNAT has always executed
     correctly.

     RM References:  7.06.01 (17.1/1)

   * `AI-0026 Missing rules for Unchecked_Union (2010-07-07)'

     Record representation clauses concerning Unchecked_Union types
     cannot mention the discriminant of the type. The type of a
     component declared in the variant part of an Unchecked_Union
     cannot be controlled, have controlled components, nor have
     protected or task parts. If an Unchecked_Union type is declared
     within the body of a generic unit or its descendants, then the
     type of a component declared in the variant part cannot be a
     formal private type or a formal private extension declared within
     the same generic unit.

     RM References:  7.06 (9.4/2)   B.03.03 (9/2)   B.03.03 (10/2)

   * `AI-0205 Extended return declares visible name (0000-00-00)'

     This AI corrects a simple omission in the RM. Return objects have
     always been visible within an extended return statement.

     RM References:  8.03 (17)

   * `AI-0042 Overriding versus implemented-by (0000-00-00)'

     This AI fixes a wording gap in the RM. An operation of a
     synchronized interface can be implemented by a protected or task
     entry, but the abstract operation is not being overridden in the
     usual sense, and it must be stated separately that this
     implementation is legal. This has always been the case in GNAT.

     RM References:  9.01 (9.2/2)   9.04 (11.1/2)

   * `AI-0030 Requeue on synchronized interfaces (2010-07-19)'

     Requeue is permitted to a protected, synchronized or task
     interface primitive providing it is known that the overriding
     operation is an entry. Otherwise the requeue statement has the
     same effect as a procedure call. Use of pragma `Implemented'
     provides a way to impose a static requirement on the overriding
     operation by adhering to one of the implementation kinds: entry,
     protected procedure or any of the above.

     RM References:  9.05 (9)   9.05.04 (2)   9.05.04 (3)   9.05.04 (5)
     9.05.04 (6)   9.05.04 (7)   9.05.04 (12)

   * `AI-0201 Independence of atomic object components (2010-07-22)'

     If an Atomic object has a pragma `Pack' or a `Component_Size'
     attribute, then individual components may not be addressable by
     independent tasks. However, if the representation clause has no
     effect (is confirming), then independence is not compromised.
     Furthermore, in GNAT, specification of other appropriately
     addressable component sizes (e.g. 16 for 8-bit characters) also
     preserves independence. GNAT now gives very clear warnings both
     for the declaration of such a type, and for any assignment to its
     components.

     RM References:  9.10 (1/3)   C.06 (22/2)   C.06 (23/2)

   * `AI-0009 Pragma Independent[_Components] (2010-07-23)'

     This AI introduces the new pragmas `Independent' and
     `Independent_Components', which control guaranteeing independence
     of access to objects and components.  The AI also requires
     independence not unaffected by confirming rep clauses.

     RM References:  9.10 (1)   13.01 (15/1)   13.02 (9)   13.03 (13)
     C.06 (2) C.06 (4)   C.06 (6)   C.06 (9)   C.06 (13)   C.06 (14)

   * `AI-0072 Task signalling using 'Terminated (0000-00-00)'

     This AI clarifies that task signalling for reading `'Terminated'
     only occurs if the result is True. GNAT semantics has always been
     consistent with this notion of task signalling.

     RM References:  9.10 (6.1/1)

   * `AI-0108 Limited incomplete view and discriminants (0000-00-00)'

     This AI confirms that an incomplete type from a limited view does
     not have discriminants. This has always been the case in GNAT.

     RM References:  10.01.01 (12.3/2)

   * `AI-0129 Limited views and incomplete types (0000-00-00)'

     This AI clarifies the description of limited views: a limited view
     of a package includes only one view of a type that has an
     incomplete declaration and a full declaration (there is no
     possible ambiguity in a client package).  This AI also fixes an
     omission: a nested package in the private part has no limited
     view. GNAT always implemented this correctly.

     RM References:  10.01.01 (12.2/2)   10.01.01 (12.3/2)

   * `AI-0077 Limited withs and scope of declarations (0000-00-00)'

     This AI clarifies that a declaration does not include a context
     clause, and confirms that it is illegal to have a context in which
     both a limited and a nonlimited view of a package are accessible.
     Such double visibility was always rejected by GNAT.

     RM References:  10.01.02 (12/2)   10.01.02 (21/2)   10.01.02 (22/2)

   * `AI-0122 Private with and children of generics (0000-00-00)'

     This AI clarifies the visibility of private children of generic
     units within instantiations of a parent. GNAT has always handled
     this correctly.

     RM References:  10.01.02 (12/2)

   * `AI-0040 Limited with clauses on descendant (0000-00-00)'

     This AI confirms that a limited with clause in a child unit cannot
     name an ancestor of the unit. This has always been checked in GNAT.

     RM References:  10.01.02 (20/2)

   * `AI-0132 Placement of library unit pragmas (0000-00-00)'

     This AI fills a gap in the description of library unit pragmas.
     The pragma clearly must apply to a library unit, even if it does
     not carry the name of the enclosing unit. GNAT has always enforced
     the required check.

     RM References:  10.01.05 (7)

   * `AI-0034 Categorization of limited views (0000-00-00)'

     The RM makes certain limited with clauses illegal because of
     categorization considerations, when the corresponding normal with
     would be legal. This is not intended, and GNAT has always
     implemented the recommended behavior.

     RM References:  10.02.01 (11/1)   10.02.01 (17/2)

   * `AI-0035 Inconsistencies with Pure units (0000-00-00)'

     This AI remedies some inconsistencies in the legality rules for
     Pure units.  Derived access types are legal in a pure unit (on the
     assumption that the rule for a zero storage pool size has been
     enforced on the ancestor type).  The rules are enforced in generic
     instances and in subunits. GNAT has always implemented the
     recommended behavior.

     RM References:  10.02.01 (15.1/2)   10.02.01 (15.4/2)   10.02.01
     (15.5/2)   10.02.01 (17/2)

   * `AI-0219 Pure permissions and limited parameters (2010-05-25)'

     This AI refines the rules for the cases with limited parameters
     which do not allow the implementations to omit 'redundant'. GNAT
     now properly conforms to the requirements of this binding
     interpretation.

     RM References:  10.02.01 (18/2)

   * `AI-0043 Rules about raising exceptions (0000-00-00)'

     This AI covers various omissions in the RM regarding the raising of
     exceptions. GNAT has always implemented the intended semantics.

     RM References:  11.04.01 (10.1/2)   11 (2)

   * `AI-0200 Mismatches in formal package declarations (0000-00-00)'

     This AI plugs a gap in the RM which appeared to allow some
     obviously intended illegal instantiations. GNAT has never allowed
     these instantiations.

     RM References:  12.07 (16)

   * `AI-0112 Detection of duplicate pragmas (2010-07-24)'

     This AI concerns giving names to various representation aspects,
     but the practical effect is simply to make the use of duplicate
     `Atomic[_Components]', `Volatile[_Components]', and
     `Independent[_Components]' pragmas illegal, and GNAT now performs
     this required check.

     RM References:  13.01 (8)

   * `AI-0106 No representation pragmas on generic formals (0000-00-00)'

     The RM appeared to allow representation pragmas on generic formal
     parameters, but this was not intended, and GNAT has never
     permitted this usage.

     RM References:  13.01 (9.1/1)

   * `AI-0012 Pack/Component_Size for aliased/atomic (2010-07-15)'

     It is now illegal to give an inappropriate component size or a
     pragma `Pack' that attempts to change the component size in the
     case of atomic or aliased components. Previously GNAT ignored such
     an attempt with a warning.

     RM References:  13.02 (6.1/2)   13.02 (7)   C.06 (10)   C.06 (11)
     C.06 (21)

   * `AI-0039 Stream attributes cannot be dynamic (0000-00-00)'

     The RM permitted the use of dynamic expressions (such as
     `ptr.all')` for stream attributes, but these were never useful and
     are now illegal. GNAT has always regarded such expressions as
     illegal.

     RM References:  13.03 (4)   13.03 (6)   13.13.02 (38/2)

   * `AI-0095 Address of intrinsic subprograms (0000-00-00)'

     The prefix of `'Address' cannot statically denote a subprogram with
     convention `Intrinsic'. The use of the `Address' attribute raises
     `Program_Error' if the prefix denotes a subprogram with convention
     `Intrinsic'.

     RM References:  13.03 (11/1)

   * `AI-0116 Alignment of class-wide objects (0000-00-00)'

     This AI requires that the alignment of a class-wide object be no
     greater than the alignment of any type in the class. GNAT has
     always followed this recommendation.

     RM References:  13.03 (29)   13.11 (16)

   * `AI-0146 Type invariants (2009-09-21)'

     Type invariants may be specified for private types using the
     aspect notation.  Aspect `Type_Invariant' may be specified for any
     private type, `Type_Invariant'Class' can only be specified for
     tagged types, and is inherited by any descendent of the tagged
     types. The invariant is a boolean expression that is tested for
     being true in the following situations: conversions to the private
     type, object declarations for the private type that are default
     initialized, and [`in'] `out' parameters and returned result on
     return from any primitive operation for the type that is visible
     to a client.  GNAT defines the synonyms `Invariant' for
     `Type_Invariant' and `Invariant'Class' for `Type_Invariant'Class'.

     RM References:  13.03.03 (00)

   * `AI-0078 Relax Unchecked_Conversion alignment rules (0000-00-00)'

     In Ada 2012, compilers are required to support unchecked
     conversion where the target alignment is a multiple of the source
     alignment. GNAT always supported this case (and indeed all cases
     of differing alignments, doing copies where required if the
     alignment was reduced).

     RM References:  13.09 (7)

   * `AI-0195 Invalid value handling is implementation defined
     (2010-07-03)'

     The handling of invalid values is now designated to be
     implementation defined. This is a documentation change only,
     requiring Annex M in the GNAT Reference Manual to document this
     handling.  In GNAT, checks for invalid values are made only when
     necessary to avoid erroneous behavior. Operations like assignments
     which cannot cause erroneous behavior ignore the possibility of
     invalid values and do not do a check. The date given above applies
     only to the documentation change, this behavior has always been
     implemented by GNAT.

     RM References:  13.09.01 (10)

   * `AI-0193 Alignment of allocators (2010-09-16)'

     This AI introduces a new attribute `Max_Alignment_For_Allocation',
     analogous to `Max_Size_In_Storage_Elements', but for alignment
     instead of size.

     RM References:  13.11 (16)   13.11 (21)   13.11.01 (0)   13.11.01
     (1) 13.11.01 (2)   13.11.01 (3)

   * `AI-0177 Parameterized expressions (2010-07-10)'

     The new Ada 2012 notion of parameterized expressions is
     implemented. The form is:

         function-specification is (expression)

     This is exactly equivalent to the corresponding function body that
     returns the expression, but it can appear in a package spec. Note
     that the expression must be parenthesized.

     RM References:  13.11.01 (3/2)

   * `AI-0033 Attach/Interrupt_Handler in generic (2010-07-24)'

     Neither of these two pragmas may appear within a generic template,
     because the generic might be instantiated at other than the
     library level.

     RM References:  13.11.02 (16)   C.03.01 (7/2)   C.03.01 (8/2)

   * `AI-0161 Restriction No_Default_Stream_Attributes (2010-09-11)'

     A new restriction `No_Default_Stream_Attributes' prevents the use
     of any of the default stream attributes for elementary types. If
     this restriction is in force, then it is necessary to provide
     explicit subprograms for any stream attributes used.

     RM References:  13.12.01 (4/2)   13.13.02 (40/2)   13.13.02 (52/2)

   * `AI-0194 Value of Stream_Size attribute (0000-00-00)'

     The `Stream_Size' attribute returns the default number of bits in
     the stream representation of the given type.  This value is not
     affected by the presence of stream subprogram attributes for the
     type. GNAT has always implemented this interpretation.

     RM References:  13.13.02 (1.2/2)

   * `AI-0109 Redundant check in S'Class'Input (0000-00-00)'

     This AI is an editorial change only. It removes the need for a tag
     check that can never fail.

     RM References:  13.13.02 (34/2)

   * `AI-0007 Stream read and private scalar types (0000-00-00)'

     The RM as written appeared to limit the possibilities of declaring
     read attribute procedures for private scalar types. This
     limitation was not intended, and has never been enforced by GNAT.

     RM References:  13.13.02 (50/2)   13.13.02 (51/2)

   * `AI-0065 Remote access types and external streaming (0000-00-00)'

     This AI clarifies the fact that all remote access types support
     external streaming. This fixes an obvious oversight in the
     definition of the language, and GNAT always implemented the
     intended correct rules.

     RM References:  13.13.02 (52/2)

   * `AI-0019 Freezing of primitives for tagged types (0000-00-00)'

     The RM suggests that primitive subprograms of a specific tagged
     type are frozen when the tagged type is frozen. This would be an
     incompatible change and is not intended. GNAT has never attempted
     this kind of freezing and its behavior is consistent with the
     recommendation of this AI.

     RM References:  13.14 (2)   13.14 (3/1)   13.14 (8.1/1)   13.14
     (10)   13.14 (14)   13.14 (15.1/2)

   * `AI-0017 Freezing and incomplete types (0000-00-00)'

     So-called 'Taft-amendment types' (i.e., types that are completed
     in package bodies) are not frozen by the occurrence of bodies in
     the enclosing declarative part. GNAT always implemented this
     properly.

     RM References:  13.14 (3/1)

   * `AI-0060 Extended definition of remote access types (0000-00-00)'

     This AI extends the definition of remote access types to include
     access to limited, synchronized, protected or task class-wide
     interface types.  GNAT already implemented this extension.

     RM References:  A (4)   E.02.02 (9/1)   E.02.02 (9.2/1)   E.02.02
     (14/2)   E.02.02 (18)

   * `AI-0114 Classification of letters (0000-00-00)'

     The code points 170 (`FEMININE ORDINAL INDICATOR'), 181 (`MICRO
     SIGN'), and 186 (`MASCULINE ORDINAL INDICATOR') are technically
     considered lower case letters by Unicode.  However, they are not
     allowed in identifiers, and they return `False' to
     `Ada.Characters.Handling.Is_Letter/Is_Lower'.  This behavior is
     consistent with that defined in Ada 95.

     RM References:  A.03.02 (59)   A.04.06 (7)

   * `AI-0185 Ada.Wide_[Wide_]Characters.Handling (2010-07-06)'

     Two new packages `Ada.Wide_[Wide_]Characters.Handling' provide
     classification functions for `Wide_Character' and
     `Wide_Wide_Character', as well as providing case folding routines
     for `Wide_[Wide_]Character' and `Wide_[Wide_]String'.

     RM References:  A.03.05 (0)   A.03.06 (0)

   * `AI-0031 Add From parameter to Find_Token (2010-07-25)'

     A new version of `Find_Token' is added to all relevant string
     packages, with an extra parameter `From'. Instead of starting at
     the first character of the string, the search for a matching Token
     starts at the character indexed by the value of `From'.  These
     procedures are available in all versions of Ada but if used in
     versions earlier than Ada 2012 they will generate a warning that
     an Ada 2012 subprogram is being used.

     RM References:  A.04.03 (16)   A.04.03 (67)   A.04.03 (68/1)
     A.04.04 (51) A.04.05 (46)

   * `AI-0056 Index on null string returns zero (0000-00-00)'

     The wording in the Ada 2005 RM implied an incompatible handling of
     the `Index' functions, resulting in raising an exception instead of
     returning zero in some situations.  This was not intended and has
     been corrected.  GNAT always returned zero, and is thus consistent
     with this AI.

     RM References:  A.04.03 (56.2/2)   A.04.03 (58.5/2)

   * `AI-0137 String encoding package (2010-03-25)'

     The packages `Ada.Strings.UTF_Encoding', together with its child
     packages, `Conversions', `Strings', `Wide_Strings', and
     `Wide_Wide_Strings' have been implemented. These packages (whose
     documentation can be found in the spec files `a-stuten.ads',
     `a-suenco.ads', `a-suenst.ads', `a-suewst.ads', `a-suezst.ads')
     allow encoding and decoding of `String', `Wide_String', and
     `Wide_Wide_String' values using UTF coding schemes (including
     UTF-8, UTF-16LE, UTF-16BE, and UTF-16), as well as conversions
     between the different UTF encodings. With the exception of
     `Wide_Wide_Strings', these packages are available in Ada 95 and
     Ada 2005 mode as well as Ada 2012 mode.  The `Wide_Wide_Strings
     package' is available in Ada 2005 mode as well as Ada 2012 mode
     (but not in Ada 95 mode since it uses `Wide_Wide_Character').

     RM References:  A.04.11

   * `AI-0038 Minor errors in Text_IO (0000-00-00)'

     These are minor errors in the description on three points. The
     intent on all these points has always been clear, and GNAT has
     always implemented the correct intended semantics.

     RM References:  A.10.05 (37)   A.10.07 (8/1)   A.10.07 (10)
     A.10.07 (12)   A.10.08 (10)   A.10.08 (24)

   * `AI-0044 Restrictions on container instantiations (0000-00-00)'

     This AI places restrictions on allowed instantiations of generic
     containers.  These restrictions are not checked by the compiler,
     so there is nothing to change in the implementation. This affects
     only the RM documentation.

     RM References:  A.18 (4/2)   A.18.02 (231/2)   A.18.03 (145/2)
     A.18.06 (56/2)   A.18.08 (66/2)   A.18.09 (79/2)   A.18.26 (5/2)
     A.18.26 (9/2)

   * `AI-0127 Adding Locale Capabilities (2010-09-29)'

     This package provides an interface for identifying the current
     locale.

     RM References:  A.19    A.19.01    A.19.02    A.19.03    A.19.05
     A.19.06 A.19.07    A.19.08    A.19.09    A.19.10    A.19.11
     A.19.12    A.19.13

   * `AI-0002 Export C with unconstrained arrays (0000-00-00)'

     The compiler is not required to support exporting an Ada
     subprogram with convention C if there are parameters or a return
     type of an unconstrained array type (such as `String'). GNAT
     allows such declarations but generates warnings. It is possible,
     but complicated, to write the corresponding C code and certainly
     such code would be specific to GNAT and non-portable.

     RM References:  B.01 (17)   B.03 (62)   B.03 (71.1/2)

   * `AI-0216 No_Task_Hierarchy forbids local tasks (0000-00-00)'

     It is clearly the intention that `No_Task_Hierarchy' is intended to
     forbid tasks declared locally within subprograms, or functions
     returning task objects, and that is the implementation that GNAT
     has always provided.  However the language in the RM was not
     sufficiently clear on this point.  Thus this is a documentation
     change in the RM only.

     RM References:  D.07 (3/3)

   * `AI-0211 No_Relative_Delays forbids Set_Handler use (2010-07-09)'

     The restriction `No_Relative_Delays' forbids any calls to the
     subprogram `Ada.Real_Time.Timing_Events.Set_Handler'.

     RM References:  D.07 (5)   D.07 (10/2)   D.07 (10.4/2)   D.07
     (10.7/2)

   * `AI-0190 pragma Default_Storage_Pool (2010-09-15)'

     This AI introduces a new pragma `Default_Storage_Pool', which can
     be used to control storage pools globally.  In particular, you can
     force every access type that is used for allocation (`new') to
     have an explicit storage pool, or you can declare a pool globally
     to be used for all access types that lack an explicit one.

     RM References:  D.07 (8)

   * `AI-0189 No_Allocators_After_Elaboration (2010-01-23)'

     This AI introduces a new restriction
     `No_Allocators_After_Elaboration', which says that no dynamic
     allocation will occur once elaboration is completed.  In general
     this requires a run-time check, which is not required, and which
     GNAT does not attempt. But the static cases of allocators in a
     task body or in the body of the main program are detected and
     flagged at compile or bind time.

     RM References:  D.07 (19.1/2)   H.04 (23.3/2)

   * `AI-0171 Pragma CPU and Ravenscar Profile (2010-09-24)'

     A new package `System.Multiprocessors' is added, together with the
     definition of pragma `CPU' for controlling task affinity. A new no
     dependence restriction, on
     `System.Multiprocessors.Dispatching_Domains', is added to the
     Ravenscar profile.

     RM References:  D.13.01 (4/2)   D.16

   * `AI-0210 Correct Timing_Events metric (0000-00-00)'

     This is a documentation only issue regarding wording of metric
     requirements, that does not affect the implementation of the
     compiler.

     RM References:  D.15 (24/2)

   * `AI-0206 Remote types packages and preelaborate (2010-07-24)'

     Remote types packages are now allowed to depend on preelaborated
     packages.  This was formerly considered illegal.

     RM References:  E.02.02 (6)

   * `AI-0152 Restriction No_Anonymous_Allocators (2010-09-08)'

     Restriction `No_Anonymous_Allocators' prevents the use of
     allocators where the type of the returned value is an anonymous
     access type.

     RM References:  H.04 (8/1)


File: gnat_rm.info,  Node: Obsolescent Features,  Next: Compatibility and Porting Guide,  Prev: Implementation of Ada 2012 Features,  Up: Top

17 Obsolescent Features
***********************

This chapter describes features that are provided by GNAT, but are
considered obsolescent since there are preferred ways of achieving the
same effect. These features are provided solely for historical
compatibility purposes.

* Menu:

* pragma No_Run_Time::
* pragma Ravenscar::
* pragma Restricted_Run_Time::
* pragma Task_Info::
* package System.Task_Info (s-tasinf.ads): package System Task_Info s-tasinf ads.


File: gnat_rm.info,  Node: pragma No_Run_Time,  Next: pragma Ravenscar,  Up: Obsolescent Features

17.1 pragma No_Run_Time
=======================

The pragma `No_Run_Time' is used to achieve an affect similar to the
use of the "Zero Foot Print" configurable run time, but without
requiring a specially configured run time. The result of using this
pragma, which must be used for all units in a partition, is to restrict
the use of any language features requiring run-time support code. The
preferred usage is to use an appropriately configured run-time that
includes just those features that are to be made accessible.


File: gnat_rm.info,  Node: pragma Ravenscar,  Next: pragma Restricted_Run_Time,  Prev: pragma No_Run_Time,  Up: Obsolescent Features

17.2 pragma Ravenscar
=====================

The pragma `Ravenscar' has exactly the same effect as pragma `Profile
(Ravenscar)'. The latter usage is preferred since it is part of the new
Ada 2005 standard.


File: gnat_rm.info,  Node: pragma Restricted_Run_Time,  Next: pragma Task_Info,  Prev: pragma Ravenscar,  Up: Obsolescent Features

17.3 pragma Restricted_Run_Time
===============================

The pragma `Restricted_Run_Time' has exactly the same effect as pragma
`Profile (Restricted)'. The latter usage is preferred since the Ada
2005 pragma `Profile' is intended for this kind of implementation
dependent addition.


File: gnat_rm.info,  Node: pragma Task_Info,  Next: package System Task_Info s-tasinf ads,  Prev: pragma Restricted_Run_Time,  Up: Obsolescent Features

17.4 pragma Task_Info
=====================

The functionality provided by pragma `Task_Info' is now part of the Ada
language. The `CPU' aspect and the package `System.Multiprocessors'
offer a less system-dependent way to specify task affinity or to query
the number of processsors.

Syntax

    pragma Task_Info (EXPRESSION);

This pragma appears within a task definition (like pragma `Priority')
and applies to the task in which it appears.  The argument must be of
type `System.Task_Info.Task_Info_Type'.  The `Task_Info' pragma
provides system dependent control over aspects of tasking
implementation, for example, the ability to map tasks to specific
processors.  For details on the facilities available for the version of
GNAT that you are using, see the documentation in the spec of package
System.Task_Info in the runtime library.


File: gnat_rm.info,  Node: package System Task_Info s-tasinf ads,  Prev: pragma Task_Info,  Up: Obsolescent Features

17.5 package System.Task_Info (`s-tasinf.ads')
==============================================

This package provides target dependent functionality that is used to
support the `Task_Info' pragma. The predefined Ada package
`System.Multiprocessors' and the `CPU' aspect now provide a standard
replacement for GNAT's `Task_Info' functionality.


File: gnat_rm.info,  Node: Compatibility and Porting Guide,  Next: GNU Free Documentation License,  Prev: Obsolescent Features,  Up: Top

18 Compatibility and Porting Guide
**********************************

This chapter presents some guidelines for developing portable Ada code,
describes the compatibility issues that may arise between GNAT and
other Ada compilation systems (including those for Ada 83), and shows
how GNAT can expedite porting applications developed in other Ada
environments.

* Menu:

* Writing Portable Fixed-Point Declarations::
* Compatibility with Ada 83::
* Compatibility between Ada 95 and Ada 2005::
* Implementation-dependent characteristics::
* Compatibility with Other Ada Systems::
* Representation Clauses::
* Compatibility with HP Ada 83::


File: gnat_rm.info,  Node: Writing Portable Fixed-Point Declarations,  Next: Compatibility with Ada 83,  Up: Compatibility and Porting Guide

18.1 Writing Portable Fixed-Point Declarations
==============================================

The Ada Reference Manual gives an implementation freedom to choose
bounds that are narrower by `Small' from the given bounds.  For
example, if we write

    type F1 is delta 1.0 range -128.0 .. +128.0;

then the implementation is allowed to choose -128.0 .. +127.0 if it
likes, but is not required to do so.

This leads to possible portability problems, so let's have a closer
look at this, and figure out how to avoid these problems.

First, why does this freedom exist, and why would an implementation
take advantage of it? To answer this, take a closer look at the type
declaration for `F1' above. If the compiler uses the given bounds, it
would need 9 bits to hold the largest positive value (and typically
that means 16 bits on all machines). But if the implementation chooses
the +127.0 bound then it can fit values of the type in 8 bits.

Why not make the user write +127.0 if that's what is wanted?  The
rationale is that if you are thinking of fixed point as a kind of 'poor
man's floating-point', then you don't want to be thinking about the
scaled integers that are used in its representation. Let's take another
example:

    type F2 is delta 2.0**(-15) range -1.0 .. +1.0;

Looking at this declaration, it seems casually as though it should fit
in 16 bits, but again that extra positive value +1.0 has the scaled
integer equivalent of 2**15 which is one too big for signed 16 bits.
The implementation can treat this as:

    type F2 is delta 2.0**(-15) range -1.0 .. +1.0-(2.0**(-15));

and the Ada language design team felt that this was too annoying to
require. We don't need to debate this decision at this point, since it
is well established (the rule about narrowing the ranges dates to Ada
83).

But the important point is that an implementation is not required to do
this narrowing, so we have a potential portability problem.  We could
imagine three types of implementation:

  a. those that narrow the range automatically if they can figure out
     that the narrower range will allow storage in a smaller machine
     unit,

  b. those that will narrow only if forced to by a `'Size' clause, and

  c. those that will never narrow.

Now if we are language theoreticians, we can imagine a fourth approach:
to narrow all the time, e.g. to treat

    type F3 is delta 1.0 range -10.0 .. +23.0;

as though it had been written:

    type F3 is delta 1.0 range -9.0 .. +22.0;

But although technically allowed, such a behavior would be hostile and
silly, and no real compiler would do this. All real compilers will fall
into one of the categories (a), (b) or (c) above.

So, how do you get the compiler to do what you want? The answer is give
the actual bounds you want, and then use a `'Small' clause and a
`'Size' clause to absolutely pin down what the compiler does.  E.g.,
for `F2' above, we will write:

    My_Small : constant := 2.0**(-15);
    My_First : constant := -1.0;
    My_Last  : constant := +1.0 - My_Small;

    type F2 is delta My_Small range My_First .. My_Last;

and then add

    for F2'Small use my_Small;
    for F2'Size  use 16;

In practice all compilers will do the same thing here and will give you
what you want, so the above declarations are fully portable. If you
really want to play language lawyer and guard against ludicrous
behavior by the compiler you could add

    Test1 : constant := 1 / Boolean'Pos (F2'First = My_First);
    Test2 : constant := 1 / Boolean'Pos (F2'Last  = My_Last);

One or other or both are allowed to be illegal if the compiler is
behaving in a silly manner, but at least the silly compiler will not
get away with silently messing with your (very clear) intentions.

If you follow this scheme you will be guaranteed that your fixed-point
types will be portable.


File: gnat_rm.info,  Node: Compatibility with Ada 83,  Next: Compatibility between Ada 95 and Ada 2005,  Prev: Writing Portable Fixed-Point Declarations,  Up: Compatibility and Porting Guide

18.2 Compatibility with Ada 83
==============================

Ada 95 and the subsequent revisions Ada 2005 and Ada 2012 are highly
upwards compatible with Ada 83.  In particular, the design intention
was that the difficulties associated with moving from Ada 83 to later
versions of the standard should be no greater than those that occur
when moving from one Ada 83 system to another.

However, there are a number of points at which there are minor
incompatibilities.  The `Ada 95 Annotated Reference Manual' contains
full details of these issues as they relate to Ada 95, and should be
consulted for a complete treatment.  In practice the following
subsections treat the most likely issues to be encountered.

* Menu:

* Legal Ada 83 programs that are illegal in Ada 95::
* More deterministic semantics::
* Changed semantics::
* Other language compatibility issues::


File: gnat_rm.info,  Node: Legal Ada 83 programs that are illegal in Ada 95,  Next: More deterministic semantics,  Up: Compatibility with Ada 83

18.2.1 Legal Ada 83 programs that are illegal in Ada 95
-------------------------------------------------------

Some legal Ada 83 programs are illegal (i.e., they will fail to
compile) in Ada 95 and later versions of the standard:

   * `Character literals'

     Some uses of character literals are ambiguous.  Since Ada 95 has
     introduced `Wide_Character' as a new predefined character type,
     some uses of character literals that were legal in Ada 83 are
     illegal in Ada 95.  For example:

         for Char in 'A' .. 'Z' loop ... end loop;

     The problem is that 'A' and 'Z' could be from either `Character'
     or `Wide_Character'.  The simplest correction is to make the type
     explicit; e.g.:

         for Char in Character range 'A' .. 'Z' loop ... end loop;

   * `New reserved words'

     The identifiers `abstract', `aliased', `protected', `requeue',
     `tagged', and `until' are reserved in Ada 95.  Existing Ada 83
     code using any of these identifiers must be edited to use some
     alternative name.

   * `Freezing rules'

     The rules in Ada 95 are slightly different with regard to the
     point at which entities are frozen, and representation pragmas and
     clauses are not permitted past the freeze point.  This shows up
     most typically in the form of an error message complaining that a
     representation item appears too late, and the appropriate
     corrective action is to move the item nearer to the declaration of
     the entity to which it refers.

     A particular case is that representation pragmas cannot be applied
     to a subprogram body.  If necessary, a separate subprogram
     declaration must be introduced to which the pragma can be applied.

   * `Optional bodies for library packages'

     In Ada 83, a package that did not require a package body was
     nevertheless allowed to have one.  This lead to certain surprises
     in compiling large systems (situations in which the body could be
     unexpectedly ignored by the binder).  In Ada 95, if a package does
     not require a body then it is not permitted to have a body.  To
     fix this problem, simply remove a redundant body if it is empty,
     or, if it is non-empty, introduce a dummy declaration into the
     spec that makes the body required.  One approach is to add a
     private part to the package declaration (if necessary), and define
     a parameterless procedure called `Requires_Body', which must then
     be given a dummy procedure body in the package body, which then
     becomes required.  Another approach (assuming that this does not
     introduce elaboration circularities) is to add an `Elaborate_Body'
     pragma to the package spec, since one effect of this pragma is to
     require the presence of a package body.

   * `Numeric_Error is the same exception as Constraint_Error'

     In Ada 95, the exception `Numeric_Error' is a renaming of
     `Constraint_Error'.  This means that it is illegal to have
     separate exception handlers for the two exceptions.  The fix is
     simply to remove the handler for the `Numeric_Error' case (since
     even in Ada 83, a compiler was free to raise `Constraint_Error' in
     place of `Numeric_Error' in all cases).

   * `Indefinite subtypes in generics'

     In Ada 83, it was permissible to pass an indefinite type (e.g,
     `String') as the actual for a generic formal private type, but
     then the instantiation would be illegal if there were any
     instances of declarations of variables of this type in the generic
     body.  In Ada 95, to avoid this clear violation of the
     methodological principle known as the 'contract model', the
     generic declaration explicitly indicates whether or not such
     instantiations are permitted.  If a generic formal parameter has
     explicit unknown discriminants, indicated by using `(<>)' after the
     subtype name, then it can be instantiated with indefinite types,
     but no stand-alone variables can be declared of this type.  Any
     attempt to declare such a variable will result in an illegality at
     the time the generic is declared.  If the `(<>)' notation is not
     used, then it is illegal to instantiate the generic with an
     indefinite type.  This is the potential incompatibility issue when
     porting Ada 83 code to Ada 95.  It will show up as a compile time
     error, and the fix is usually simply to add the `(<>)' to the
     generic declaration.


File: gnat_rm.info,  Node: More deterministic semantics,  Next: Changed semantics,  Prev: Legal Ada 83 programs that are illegal in Ada 95,  Up: Compatibility with Ada 83

18.2.2 More deterministic semantics
-----------------------------------

   * `Conversions'

     Conversions from real types to integer types round away from 0.
     In Ada 83 the conversion Integer(2.5) could deliver either 2 or 3
     as its value.  This implementation freedom was intended to support
     unbiased rounding in statistical applications, but in practice it
     interfered with portability.  In Ada 95 the conversion semantics
     are unambiguous, and rounding away from 0 is required.  Numeric
     code may be affected by this change in semantics.  Note, though,
     that this issue is no worse than already existed in Ada 83 when
     porting code from one vendor to another.

   * `Tasking'

     The Real-Time Annex introduces a set of policies that define the
     behavior of features that were implementation dependent in Ada 83,
     such as the order in which open select branches are executed.


File: gnat_rm.info,  Node: Changed semantics,  Next: Other language compatibility issues,  Prev: More deterministic semantics,  Up: Compatibility with Ada 83

18.2.3 Changed semantics
------------------------

The worst kind of incompatibility is one where a program that is legal
in Ada 83 is also legal in Ada 95 but can have an effect in Ada 95 that
was not possible in Ada 83.  Fortunately this is extremely rare, but
the one situation that you should be alert to is the change in the
predefined type `Character' from 7-bit ASCII to 8-bit Latin-1.

 
   * `Range of type `Character`'

     The range of `Standard.Character' is now the full 256 characters
     of Latin-1, whereas in most Ada 83 implementations it was
     restricted to 128 characters. Although some of the effects of this
     change will be manifest in compile-time rejection of legal Ada 83
     programs it is possible for a working Ada 83 program to have a
     different effect in Ada 95, one that was not permitted in Ada 83.
     As an example, the expression `Character'Pos(Character'Last)'
     returned `127' in Ada 83 and now delivers `255' as its value.  In
     general, you should look at the logic of any character-processing
     Ada 83 program and see whether it needs to be adapted to work
     correctly with Latin-1.  Note that the predefined Ada 95 API has a
     character handling package that may be relevant if code needs to
     be adapted to account for the additional Latin-1 elements.  The
     desirable fix is to modify the program to accommodate the full
     character set, but in some cases it may be convenient to define a
     subtype or derived type of Character that covers only the
     restricted range.


File: gnat_rm.info,  Node: Other language compatibility issues,  Prev: Changed semantics,  Up: Compatibility with Ada 83

18.2.4 Other language compatibility issues
------------------------------------------

   * `-gnat83' switch

     All implementations of GNAT provide a switch that causes GNAT to
     operate in Ada 83 mode.  In this mode, some but not all
     compatibility problems of the type described above are handled
     automatically.  For example, the new reserved words introduced in
     Ada 95 and Ada 2005 are treated simply as identifiers as in Ada
     83.  However, in practice, it is usually advisable to make the
     necessary modifications to the program to remove the need for
     using this switch.  See the `Compiling Different Versions of Ada'
     section in the `GNAT User's Guide'.

   * Support for removed Ada 83 pragmas and attributes

     A number of pragmas and attributes from Ada 83 were removed from
     Ada 95, generally because they were replaced by other mechanisms.
     Ada 95 and Ada 2005 compilers are allowed, but not required, to
     implement these missing elements.  In contrast with some other
     compilers, GNAT implements all such pragmas and attributes,
     eliminating this compatibility concern.  These include `pragma
     Interface' and the floating point type attributes (`Emax',
     `Mantissa', etc.), among other items.


File: gnat_rm.info,  Node: Compatibility between Ada 95 and Ada 2005,  Next: Implementation-dependent characteristics,  Prev: Compatibility with Ada 83,  Up: Compatibility and Porting Guide

18.3 Compatibility between Ada 95 and Ada 2005
==============================================

Although Ada 2005 was designed to be upwards compatible with Ada 95,
there are a number of incompatibilities. Several are enumerated below;
for a complete description please see the `Annotated Ada 2005 Reference
Manual', or section 9.1.1 in `Rationale for Ada 2005'.

   * `New reserved words.'

     The words `interface', `overriding' and `synchronized' are
     reserved in Ada 2005.  A pre-Ada 2005 program that uses any of
     these as an identifier will be illegal.

   * `New declarations in predefined packages.'

     A number of packages in the predefined environment contain new
     declarations: `Ada.Exceptions', `Ada.Real_Time', `Ada.Strings',
     `Ada.Strings.Fixed', `Ada.Strings.Bounded',
     `Ada.Strings.Unbounded', `Ada.Strings.Wide_Fixed',
     `Ada.Strings.Wide_Bounded', `Ada.Strings.Wide_Unbounded',
     `Ada.Tags', `Ada.Text_IO', and `Interfaces.C'.  If an Ada 95
     program does a `with' and `use' of any of these packages, the new
     declarations may cause name clashes.

   * `Access parameters.'

     A nondispatching subprogram with an access parameter cannot be
     renamed as a dispatching operation.  This was permitted in Ada 95.

   * `Access types, discriminants, and constraints.'

     Rule changes in this area have led to some incompatibilities; for
     example, constrained subtypes of some access types are not
     permitted in Ada 2005.

   * `Aggregates for limited types.'

     The allowance of aggregates for limited types in Ada 2005 raises
     the possibility of ambiguities in legal Ada 95 programs, since
     additional types now need to be considered in expression
     resolution.

   * `Fixed-point multiplication and division.'

     Certain expressions involving '*' or '/' for a fixed-point type,
     which were legal in Ada 95 and invoked the predefined versions of
     these operations, are now ambiguous.  The ambiguity may be
     resolved either by applying a type conversion to the expression,
     or by explicitly invoking the operation from package `Standard'.

   * `Return-by-reference types.'

     The Ada 95 return-by-reference mechanism has been removed.
     Instead, the user can declare a function returning a value from an
     anonymous access type.


File: gnat_rm.info,  Node: Implementation-dependent characteristics,  Next: Compatibility with Other Ada Systems,  Prev: Compatibility between Ada 95 and Ada 2005,  Up: Compatibility and Porting Guide

18.4 Implementation-dependent characteristics
=============================================

Although the Ada language defines the semantics of each construct as
precisely as practical, in some situations (for example for reasons of
efficiency, or where the effect is heavily dependent on the host or
target platform) the implementation is allowed some freedom.  In
porting Ada 83 code to GNAT, you need to be aware of whether / how the
existing code exercised such implementation dependencies.  Such
characteristics fall into several categories, and GNAT offers specific
support in assisting the transition from certain Ada 83 compilers.

* Menu:

* Implementation-defined pragmas::
* Implementation-defined attributes::
* Libraries::
* Elaboration order::
* Target-specific aspects::


File: gnat_rm.info,  Node: Implementation-defined pragmas,  Next: Implementation-defined attributes,  Up: Implementation-dependent characteristics

18.4.1 Implementation-defined pragmas
-------------------------------------

Ada compilers are allowed to supplement the language-defined pragmas,
and these are a potential source of non-portability.  All GNAT-defined
pragmas are described in the `Implementation Defined Pragmas' chapter
of the `GNAT Reference Manual', and these include several that are
specifically intended to correspond to other vendors' Ada 83 pragmas.
For migrating from VADS, the pragma `Use_VADS_Size' may be useful.  For
compatibility with HP Ada 83, GNAT supplies the pragmas
`Extend_System', `Ident', `Inline_Generic', `Interface_Name',
`Passive', `Suppress_All', and `Volatile'.  Other relevant pragmas
include `External' and `Link_With'.  Some vendor-specific Ada 83
pragmas (`Share_Generic', `Subtitle', and `Title') are recognized, thus
avoiding compiler rejection of units that contain such pragmas; they
are not relevant in a GNAT context and hence are not otherwise
implemented.


File: gnat_rm.info,  Node: Implementation-defined attributes,  Next: Libraries,  Prev: Implementation-defined pragmas,  Up: Implementation-dependent characteristics

18.4.2 Implementation-defined attributes
----------------------------------------

Analogous to pragmas, the set of attributes may be extended by an
implementation.  All GNAT-defined attributes are described in
`Implementation Defined Attributes' section of the `GNAT Reference
Manual', and these include several that are specifically intended to
correspond to other vendors' Ada 83 attributes.  For migrating from
VADS, the attribute `VADS_Size' may be useful.  For compatibility with
HP Ada 83, GNAT supplies the attributes `Bit', `Machine_Size' and
`Type_Class'.


File: gnat_rm.info,  Node: Libraries,  Next: Elaboration order,  Prev: Implementation-defined attributes,  Up: Implementation-dependent characteristics

18.4.3 Libraries
----------------

Vendors may supply libraries to supplement the standard Ada API.  If
Ada 83 code uses vendor-specific libraries then there are several ways
to manage this in Ada 95 and later versions of the standard:

   * If the source code for the libraries (specs and bodies) are
     available, then the libraries can be migrated in the same way as
     the application.

   * If the source code for the specs but not the bodies are available,
     then you can reimplement the bodies.

   * Some features introduced by Ada 95 obviate the need for library
     support.  For example most Ada 83 vendors supplied a package for
     unsigned integers.  The Ada 95 modular type feature is the
     preferred way to handle this need, so instead of migrating or
     reimplementing the unsigned integer package it may be preferable
     to retrofit the application using modular types.


File: gnat_rm.info,  Node: Elaboration order,  Next: Target-specific aspects,  Prev: Libraries,  Up: Implementation-dependent characteristics

18.4.4 Elaboration order
------------------------

The implementation can choose any elaboration order consistent with the
unit dependency relationship.  This freedom means that some orders can
result in Program_Error being raised due to an 'Access Before
Elaboration': an attempt to invoke a subprogram its body has been
elaborated, or to instantiate a generic before the generic body has
been elaborated.  By default GNAT attempts to choose a safe order (one
that will not encounter access before elaboration problems) by
implicitly inserting `Elaborate' or `Elaborate_All' pragmas where
needed.  However, this can lead to the creation of elaboration
circularities and a resulting rejection of the program by gnatbind.
This issue is thoroughly described in the `Elaboration Order Handling
in GNAT' appendix in the `GNAT User's Guide'.  In brief, there are
several ways to deal with this situation:

   * Modify the program to eliminate the circularities, e.g., by moving
     elaboration-time code into explicitly-invoked procedures

   * Constrain the elaboration order by including explicit
     `Elaborate_Body' or `Elaborate' pragmas, and then inhibit the
     generation of implicit `Elaborate_All' pragmas either globally (as
     an effect of the `-gnatE' switch) or locally (by selectively
     suppressing elaboration checks via pragma
     `Suppress(Elaboration_Check)' when it is safe to do so).


File: gnat_rm.info,  Node: Target-specific aspects,  Prev: Elaboration order,  Up: Implementation-dependent characteristics

18.4.5 Target-specific aspects
------------------------------

Low-level applications need to deal with machine addresses, data
representations, interfacing with assembler code, and similar issues.
If such an Ada 83 application is being ported to different target
hardware (for example where the byte endianness has changed) then you
will need to carefully examine the program logic; the porting effort
will heavily depend on the robustness of the original design.
Moreover, Ada 95 (and thus Ada 2005 and Ada 2012) are sometimes
incompatible with typical Ada 83 compiler practices regarding implicit
packing, the meaning of the Size attribute, and the size of access
values.  GNAT's approach to these issues is described in *Note
Representation Clauses: 3f1.


File: gnat_rm.info,  Node: Compatibility with Other Ada Systems,  Next: Representation Clauses,  Prev: Implementation-dependent characteristics,  Up: Compatibility and Porting Guide

18.5 Compatibility with Other Ada Systems
=========================================

If programs avoid the use of implementation dependent and
implementation defined features, as documented in the `Ada Reference
Manual', there should be a high degree of portability between GNAT and
other Ada systems.  The following are specific items which have proved
troublesome in moving Ada 95 programs from GNAT to other Ada 95
compilers, but do not affect porting code to GNAT.  (As of January
2007, GNAT is the only compiler available for Ada 2005; the following
issues may or may not arise for Ada 2005 programs when other compilers
appear.)

   * `Ada 83 Pragmas and Attributes'

     Ada 95 compilers are allowed, but not required, to implement the
     missing Ada 83 pragmas and attributes that are no longer defined
     in Ada 95.  GNAT implements all such pragmas and attributes,
     eliminating this as a compatibility concern, but some other Ada 95
     compilers reject these pragmas and attributes.

   * `Specialized Needs Annexes'

     GNAT implements the full set of special needs annexes.  At the
     current time, it is the only Ada 95 compiler to do so.  This means
     that programs making use of these features may not be portable to
     other Ada 95 compilation systems.

   * `Representation Clauses'

     Some other Ada 95 compilers implement only the minimal set of
     representation clauses required by the Ada 95 reference manual.
     GNAT goes far beyond this minimal set, as described in the next
     section.


File: gnat_rm.info,  Node: Representation Clauses,  Next: Compatibility with HP Ada 83,  Prev: Compatibility with Other Ada Systems,  Up: Compatibility and Porting Guide

18.6 Representation Clauses
===========================

The Ada 83 reference manual was quite vague in describing both the
minimal required implementation of representation clauses, and also
their precise effects.  Ada 95 (and thus also Ada 2005) are much more
explicit, but the minimal set of capabilities required is still quite
limited.

GNAT implements the full required set of capabilities in Ada 95 and Ada
2005, but also goes much further, and in particular an effort has been
made to be compatible with existing Ada 83 usage to the greatest extent
possible.

A few cases exist in which Ada 83 compiler behavior is incompatible with
the requirements in Ada 95 (and thus also Ada 2005).  These are
instances of intentional or accidental dependence on specific
implementation dependent characteristics of these Ada 83 compilers.
The following is a list of the cases most likely to arise in existing
Ada 83 code.

   * `Implicit Packing'

     Some Ada 83 compilers allowed a Size specification to cause
     implicit packing of an array or record.  This could cause
     expensive implicit conversions for change of representation in the
     presence of derived types, and the Ada design intends to avoid
     this possibility.  Subsequent AI's were issued to make it clear
     that such implicit change of representation in response to a Size
     clause is inadvisable, and this recommendation is represented
     explicitly in the Ada 95 (and Ada 2005) Reference Manuals as
     implementation advice that is followed by GNAT.  The problem will
     show up as an error message rejecting the size clause.  The fix is
     simply to provide the explicit pragma `Pack', or for more fine
     tuned control, provide a Component_Size clause.

   * `Meaning of Size Attribute'

     The Size attribute in Ada 95 (and Ada 2005) for discrete types is
     defined as the minimal number of bits required to hold values of
     the type.  For example, on a 32-bit machine, the size of `Natural'
     will typically be 31 and not 32 (since no sign bit is required).
     Some Ada 83 compilers gave 31, and some 32 in this situation.
     This problem will usually show up as a compile time error, but not
     always.  It is a good idea to check all uses of the 'Size
     attribute when porting Ada 83 code.  The GNAT specific attribute
     Object_Size can provide a useful way of duplicating the behavior of
     some Ada 83 compiler systems.

   * `Size of Access Types'

     A common assumption in Ada 83 code is that an access type is in
     fact a pointer, and that therefore it will be the same size as a
     System.Address value.  This assumption is true for GNAT in most
     cases with one exception.  For the case of a pointer to an
     unconstrained array type (where the bounds may vary from one value
     of the access type to another), the default is to use a 'fat
     pointer', which is represented as two separate pointers, one to
     the bounds, and one to the array.  This representation has a
     number of advantages, including improved efficiency.  However, it
     may cause some difficulties in porting existing Ada 83 code which
     makes the assumption that, for example, pointers fit in 32 bits on
     a machine with 32-bit addressing.

     To get around this problem, GNAT also permits the use of 'thin
     pointers' for access types in this case (where the designated type
     is an unconstrained array type).  These thin pointers are indeed
     the same size as a System.Address value.  To specify a thin
     pointer, use a size clause for the type, for example:

         type X is access all String;
         for X'Size use Standard'Address_Size;

     which will cause the type X to be represented using a single
     pointer.  When using this representation, the bounds are right
     behind the array.  This representation is slightly less efficient,
     and does not allow quite such flexibility in the use of foreign
     pointers or in using the Unrestricted_Access attribute to create
     pointers to non-aliased objects.  But for any standard portable
     use of the access type it will work in a functionally correct
     manner and allow porting of existing code.  Note that another way
     of forcing a thin pointer representation is to use a component
     size clause for the element size in an array, or a record
     representation clause for an access field in a record.

     See the documentation of Unrestricted_Access in the GNAT RM for a
     full discussion of possible problems using this attribute in
     conjunction with thin pointers.


File: gnat_rm.info,  Node: Compatibility with HP Ada 83,  Prev: Representation Clauses,  Up: Compatibility and Porting Guide

18.7 Compatibility with HP Ada 83
=================================

All the HP Ada 83 pragmas and attributes are recognized, although only
a subset of them can sensibly be implemented.  The description of
pragmas in *Note Implementation Defined Pragmas: 7. indicates whether
or not they are applicable to GNAT.

   * `Default floating-point representation'

     In GNAT, the default floating-point format is IEEE, whereas in HP
     Ada 83, it is VMS format.

   * `System'

     the package System in GNAT exactly corresponds to the definition
     in the Ada 95 reference manual, which means that it excludes many
     of the HP Ada 83 extensions.  However, a separate package Aux_DEC
     is provided that contains the additional definitions, and a
     special pragma, Extend_System allows this package to be treated
     transparently as an extension of package System.


File: gnat_rm.info,  Node: GNU Free Documentation License,  Next: Index,  Prev: Compatibility and Porting Guide,  Up: Top

19 GNU Free Documentation License
*********************************

Version 1.3, 3 November 2008

Copyright  2000, 2001, 2002, 2007, 2008  Free Software Foundation, Inc
<http://fsf.org/>

Everyone is permitted to copy and distribute verbatim copies of this
license document, but changing it is not allowed.

`Preamble'

The purpose of this License is to make a manual, textbook, or other
functional and useful document "free" in the sense of freedom: to
assure everyone the effective freedom to copy and redistribute it, with
or without modifying it, either commercially or noncommercially.
Secondarily, this License preserves for the author and publisher a way
to get credit for their work, while not being considered responsible
for modifications made by others.

This License is a kind of "copyleft", which means that derivative works
of the document must themselves be free in the same sense.  It
complements the GNU General Public License, which is a copyleft license
designed for free software.

We have designed this License in order to use it for manuals for free
software, because free software needs free documentation: a free
program should come with manuals providing the same freedoms that the
software does.  But this License is not limited to software manuals; it
can be used for any textual work, regardless of subject matter or
whether it is published as a printed book.  We recommend this License
principally for works whose purpose is instruction or reference.

`1. APPLICABILITY AND DEFINITIONS'

This License applies to any manual or other work, in any medium, that
contains a notice placed by the copyright holder saying it can be
distributed under the terms of this License.  Such a notice grants a
world-wide, royalty-free license, unlimited in duration, to use that
work under the conditions stated herein.  The `Document', below, refers
to any such manual or work.  Any member of the public is a licensee,
and is addressed as "`you'".  You accept the license if you copy,
modify or distribute the work in a way requiring permission under
copyright law.

A "`Modified Version'" of the Document means any work containing the
Document or a portion of it, either copied verbatim, or with
modifications and/or translated into another language.

A "`Secondary Section'" is a named appendix or a front-matter section of
the Document that deals exclusively with the relationship of the
publishers or authors of the Document to the Document's overall subject
(or to related matters) and contains nothing that could fall directly
within that overall subject.  (Thus, if the Document is in part a
textbook of mathematics, a Secondary Section may not explain any
mathematics.)  The relationship could be a matter of historical
connection with the subject or with related matters, or of legal,
commercial, philosophical, ethical or political position regarding them.

The "`Invariant Sections'" are certain Secondary Sections whose titles
are designated, as being those of Invariant Sections, in the notice
that says that the Document is released under this License.  If a
section does not fit the above definition of Secondary then it is not
allowed to be designated as Invariant.  The Document may contain zero
Invariant Sections.  If the Document does not identify any Invariant
Sections then there are none.

The "`Cover Texts'" are certain short passages of text that are listed,
as Front-Cover Texts or Back-Cover Texts, in the notice that says that
the Document is released under this License.  A Front-Cover Text may be
at most 5 words, and a Back-Cover Text may be at most 25 words.

A "`Transparent'" copy of the Document means a machine-readable copy,
represented in a format whose specification is available to the general
public, that is suitable for revising the document straightforwardly
with generic text editors or (for images composed of pixels) generic
paint programs or (for drawings) some widely available drawing editor,
and that is suitable for input to text formatters or for automatic
translation to a variety of formats suitable for input to text
formatters.  A copy made in an otherwise Transparent file format whose
markup, or absence of markup, has been arranged to thwart or discourage
subsequent modification by readers is not Transparent.  An image format
is not Transparent if used for any substantial amount of text.  A copy
that is not "Transparent" is called `Opaque'.

Examples of suitable formats for Transparent copies include plain ASCII
without markup, Texinfo input format, LaTeX input format, SGML or XML
using a publicly available DTD, and standard-conforming simple HTML,
PostScript or PDF designed for human modification.  Examples of
transparent image formats include PNG, XCF and JPG.  Opaque formats
include proprietary formats that can be read and edited only by
proprietary word processors, SGML or XML for which the DTD and/or
processing tools are not generally available, and the machine-generated
HTML, PostScript or PDF produced by some word processors for output
purposes only.

The "`Title Page'" means, for a printed book, the title page itself,
plus such following pages as are needed to hold, legibly, the material
this License requires to appear in the title page.  For works in
formats which do not have any title page as such, "Title Page" means
the text near the most prominent appearance of the work's title,
preceding the beginning of the body of the text.

The "`publisher'" means any person or entity that distributes copies of
the Document to the public.

A section "`Entitled XYZ'" means a named subunit of the Document whose
title either is precisely XYZ or contains XYZ in parentheses following
text that translates XYZ in another language.  (Here XYZ stands for a
specific section name mentioned below, such as "`Acknowledgements'",
"`Dedications'", "`Endorsements'", or "`History'".)  To "`Preserve the
Title'" of such a section when you modify the Document means that it
remains a section "Entitled XYZ" according to this definition.

The Document may include Warranty Disclaimers next to the notice which
states that this License applies to the Document.  These Warranty
Disclaimers are considered to be included by reference in this License,
but only as regards disclaiming warranties: any other implication that
these Warranty Disclaimers may have is void and has no effect on the
meaning of this License.

`2. VERBATIM COPYING'

You may copy and distribute the Document in any medium, either
commercially or noncommercially, provided that this License, the
copyright notices, and the license notice saying this License applies
to the Document are reproduced in all copies, and that you add no other
conditions whatsoever to those of this License.  You may not use
technical measures to obstruct or control the reading or further
copying of the copies you make or distribute.  However, you may accept
compensation in exchange for copies.  If you distribute a large enough
number of copies you must also follow the conditions in section 3.

You may also lend copies, under the same conditions stated above, and
you may publicly display copies.

`3. COPYING IN QUANTITY'

If you publish printed copies (or copies in media that commonly have
printed covers) of the Document, numbering more than 100, and the
Document's license notice requires Cover Texts, you must enclose the
copies in covers that carry, clearly and legibly, all these Cover
Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
the back cover.  Both covers must also clearly and legibly identify you
as the publisher of these copies.  The front cover must present the
full title with all words of the title equally prominent and visible.
You may add other material on the covers in addition.  Copying with
changes limited to the covers, as long as they preserve the title of
the Document and satisfy these conditions, can be treated as verbatim
copying in other respects.

If the required texts for either cover are too voluminous to fit
legibly, you should put the first ones listed (as many as fit
reasonably) on the actual cover, and continue the rest onto adjacent
pages.

If you publish or distribute Opaque copies of the Document numbering
more than 100, you must either include a machine-readable Transparent
copy along with each Opaque copy, or state in or with each Opaque copy
a computer-network location from which the general network-using public
has access to download using public-standard network protocols a
complete Transparent copy of the Document, free of added material.  If
you use the latter option, you must take reasonably prudent steps, when
you begin distribution of Opaque copies in quantity, to ensure that
this Transparent copy will remain thus accessible at the stated
location until at least one year after the last time you distribute an
Opaque copy (directly or through your agents or retailers) of that
edition to the public.

It is requested, but not required, that you contact the authors of the
Document well before redistributing any large number of copies, to give
them a chance to provide you with an updated version of the Document.

`4. MODIFICATIONS'

You may copy and distribute a Modified Version of the Document under
the conditions of sections 2 and 3 above, provided that you release the
Modified Version under precisely this License, with the Modified
Version filling the role of the Document, thus licensing distribution
and modification of the Modified Version to whoever possesses a copy of
it.  In addition, you must do these things in the Modified Version:

  A. Use in the Title Page (and on the covers, if any) a title distinct
     from that of the Document, and from those of previous versions
     (which should, if there were any, be listed in the History section
     of the Document).  You may use the same title as a previous version
     if the original publisher of that version gives permission.

  B. List on the Title Page, as authors, one or more persons or entities
     responsible for authorship of the modifications in the Modified
     Version, together with at least five of the principal authors of
     the Document (all of its principal authors, if it has fewer than
     five), unless they release you from this requirement.

  C. State on the Title page the name of the publisher of the Modified
     Version, as the publisher.

  D. Preserve all the copyright notices of the Document.

  E. Add an appropriate copyright notice for your modifications
     adjacent to the other copyright notices.

  F. Include, immediately after the copyright notices, a license notice
     giving the public permission to use the Modified Version under the
     terms of this License, in the form shown in the Addendum below.

  G. Preserve in that license notice the full lists of Invariant
     Sections and required Cover Texts given in the Document's license
     notice.

  H. Include an unaltered copy of this License.

  I. Preserve the section Entitled "History", Preserve its Title, and
     add to it an item stating at least the title, year, new authors,
     and publisher of the Modified Version as given on the Title Page.
     If there is no section Entitled "History" in the Document, create
     one stating the title, year, authors, and publisher of the
     Document as given on its Title Page, then add an item describing
     the Modified Version as stated in the previous sentence.

  J. Preserve the network location, if any, given in the Document for
     public access to a Transparent copy of the Document, and likewise
     the network locations given in the Document for previous versions
     it was based on.  These may be placed in the "History" section.
     You may omit a network location for a work that was published at
     least four years before the Document itself, or if the original
     publisher of the version it refers to gives permission.

  K. For any section Entitled "Acknowledgements" or "Dedications",
     Preserve the Title of the section, and preserve in the section all
     the substance and tone of each of the contributor acknowledgements
     and/or dedications given therein.

  L. Preserve all the Invariant Sections of the Document, unaltered in
     their text and in their titles.  Section numbers or the equivalent
     are not considered part of the section titles.

  M. Delete any section Entitled "Endorsements".  Such a section may
     not be included in the Modified Version.

  N. Do not retitle any existing section to be Entitled "Endorsements"
     or to conflict in title with any Invariant Section.

  O. Preserve any Warranty Disclaimers.

If the Modified Version includes new front-matter sections or
appendices that qualify as Secondary Sections and contain no material
copied from the Document, you may at your option designate some or all
of these sections as invariant.  To do this, add their titles to the
list of Invariant Sections in the Modified Version's license notice.
These titles must be distinct from any other section titles.

You may add a section Entitled "Endorsements", provided it contains
nothing but endorsements of your Modified Version by various
parties--for example, statements of peer review or that the text has
been approved by an organization as the authoritative definition of a
standard.

You may add a passage of up to five words as a Front-Cover Text, and a
passage of up to 25 words as a Back-Cover Text, to the end of the list
of Cover Texts in the Modified Version.  Only one passage of
Front-Cover Text and one of Back-Cover Text may be added by (or through
arrangements made by) any one entity.  If the Document already includes
a cover text for the same cover, previously added by you or by
arrangement made by the same entity you are acting on behalf of, you
may not add another; but you may replace the old one, on explicit
permission from the previous publisher that added the old one.

The author(s) and publisher(s) of the Document do not by this License
give permission to use their names for publicity for or to assert or
imply endorsement of any Modified Version.

`5. COMBINING DOCUMENTS'

You may combine the Document with other documents released under this
License, under the terms defined in section 4 above for modified
versions, provided that you include in the combination all of the
Invariant Sections of all of the original documents, unmodified, and
list them all as Invariant Sections of your combined work in its
license notice, and that you preserve all their Warranty Disclaimers.

The combined work need only contain one copy of this License, and
multiple identical Invariant Sections may be replaced with a single
copy.  If there are multiple Invariant Sections with the same name but
different contents, make the title of each such section unique by
adding at the end of it, in parentheses, the name of the original
author or publisher of that section if known, or else a unique number.
Make the same adjustment to the section titles in the list of Invariant
Sections in the license notice of the combined work.

In the combination, you must combine any sections Entitled "History" in
the various original documents, forming one section Entitled "History";
likewise combine any sections Entitled "Acknowledgements", and any
sections Entitled "Dedications".  You must delete all sections Entitled
"Endorsements".

`6. COLLECTIONS OF DOCUMENTS'

You may make a collection consisting of the Document and other documents
released under this License, and replace the individual copies of this
License in the various documents with a single copy that is included in
the collection, provided that you follow the rules of this License for
verbatim copying of each of the documents in all other respects.

You may extract a single document from such a collection, and distribute
it individually under this License, provided you insert a copy of this
License into the extracted document, and follow this License in all
other respects regarding verbatim copying of that document.

`7. AGGREGATION WITH INDEPENDENT WORKS'

A compilation of the Document or its derivatives with other separate
and independent documents or works, in or on a volume of a storage or
distribution medium, is called an "aggregate" if the copyright
resulting from the compilation is not used to limit the legal rights of
the compilation's users beyond what the individual works permit.  When
the Document is included in an aggregate, this License does not apply
to the other works in the aggregate which are not themselves derivative
works of the Document.

If the Cover Text requirement of section 3 is applicable to these
copies of the Document, then if the Document is less than one half of
the entire aggregate, the Document's Cover Texts may be placed on
covers that bracket the Document within the aggregate, or the
electronic equivalent of covers if the Document is in electronic form.
Otherwise they must appear on printed covers that bracket the whole
aggregate.

`8. TRANSLATION'

Translation is considered a kind of modification, so you may distribute
translations of the Document under the terms of section 4.  Replacing
Invariant Sections with translations requires special permission from
their copyright holders, but you may include translations of some or
all Invariant Sections in addition to the original versions of these
Invariant Sections.  You may include a translation of this License, and
all the license notices in the Document, and any Warranty Disclaimers,
provided that you also include the original English version of this
License and the original versions of those notices and disclaimers.  In
case of a disagreement between the translation and the original version
of this License or a notice or disclaimer, the original version will
prevail.

If a section in the Document is Entitled "Acknowledgements",
"Dedications", or "History", the requirement (section 4) to Preserve
its Title (section 1) will typically require changing the actual title.

`9. TERMINATION'

You may not copy, modify, sublicense, or distribute the Document except
as expressly provided under this License.  Any attempt otherwise to
copy, modify, sublicense, or distribute it is void, and will
automatically terminate your rights under this License.

However, if you cease all violation of this License, then your license
from a particular copyright holder is reinstated (a) provisionally,
unless and until the copyright holder explicitly and finally terminates
your license, and (b) permanently, if the copyright holder fails to
notify you of the violation by some reasonable means prior to 60 days
after the cessation.

Moreover, your license from a particular copyright holder is reinstated
permanently if the copyright holder notifies you of the violation by
some reasonable means, this is the first time you have received notice
of violation of this License (for any work) from that copyright holder,
and you cure the violation prior to 30 days after your receipt of the
notice.

Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License.  If your rights have been terminated and not permanently
reinstated, receipt of a copy of some or all of the same material does
not give you any rights to use it.

`10. FUTURE REVISIONS OF THIS LICENSE'

The Free Software Foundation may publish new, revised versions of the
GNU Free Documentation License from time to time.  Such new versions
will be similar in spirit to the present version, but may differ in
detail to address new problems or concerns.  See
<http://www.gnu.org/copyleft/>.

Each version of the License is given a distinguishing version number.
If the Document specifies that a particular numbered version of this
License "or any later version" applies to it, you have the option of
following the terms and conditions either of that specified version or
of any later version that has been published (not as a draft) by the
Free Software Foundation.  If the Document does not specify a version
number of this License, you may choose any version ever published (not
as a draft) by the Free Software Foundation.  If the Document specifies
that a proxy can decide which future versions of this License can be
used, that proxy's public statement of acceptance of a version
permanently authorizes you to choose that version for the Document.

`11. RELICENSING'

"Massive Multiauthor Collaboration Site" (or "MMC Site") means any
World Wide Web server that publishes copyrightable works and also
provides prominent facilities for anybody to edit those works.  A
public wiki that anybody can edit is an example of such a server.  A
"Massive Multiauthor Collaboration" (or "MMC") contained in the site
means any set of copyrightable works thus published on the MMC site.

"CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
license published by Creative Commons Corporation, a not-for-profit
corporation with a principal place of business in San Francisco,
California, as well as future copyleft versions of that license
published by that same organization.

"Incorporate" means to publish or republish a Document, in whole or in
part, as part of another Document.

An MMC is "eligible for relicensing" if it is licensed under this
License, and if all works that were first published under this License
somewhere other than this MMC, and subsequently incorporated in whole
or in part into the MMC, (1) had no cover texts or invariant sections,
and (2) were thus incorporated prior to November 1, 2008.

The operator of an MMC Site may republish an MMC contained in the site
under CC-BY-SA on the same site at any time before August 1, 2009,
provided the MMC is eligible for relicensing.

`ADDENDUM: How to use this License for your documents'

To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:

     Copyright © YEAR  YOUR NAME.  Permission is granted to copy,
     distribute and/or modify this document under the terms of the GNU
     Free Documentation License, Version 1.3 or any later version
     published by the Free Software Foundation; with no Invariant
     Sections, no Front-Cover Texts, and no Back-Cover Texts.  A copy
     of the license is included in the section entitled "GNU Free
     Documentation License".

If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts,
replace the "with ... Texts." line with this:

     with the Invariant Sections being LIST THEIR TITLES, with the
     Front-Cover Texts being LIST, and with the Back-Cover Texts being
     LIST.

If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.

If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of
free software license, such as the GNU General Public License, to
permit their use in free software.


File: gnat_rm.info,  Node: Index,  Prev: GNU Free Documentation License,  Up: Top

Index
*****

[index]
* Menu:

* -gnat12 option (gcc):                  Implementation of Ada 2012 Features.
                                                             (line    6)
* -gnatR (gcc):                          Determining the Representations chosen by GNAT.
                                                             (line    6)
* ___lock file (for shared passive packages): GNAT Implementation of Shared Passive Packages.
                                                             (line   73)
* Abort_Signal:                          Attribute Abort_Signal.
                                                             (line    6)
* Abstract_State:                        Aspect Abstract_State.
                                                             (line    6)
* Access:                                Attribute Unrestricted_Access.
                                                             (line    6)
* Access values:                         Attribute Has_Access_Values.
                                                             (line    6)
* Accuracy:                              RM G 2 4 19 Accuracy Requirements.
                                                             (line   17)
* Accuracy requirements:                 RM G 1 2 49 Complex Elementary Functions.
                                                             (line   18)
* Ada 2005 Language Reference Manual:    What This Reference Manual Contains.
                                                             (line   78)
* Ada 2012 implementation status:        Implementation of Ada 2012 Features.
                                                             (line    6)
* Ada 83 attributes <1>:                 Attribute Safe_Small.
                                                             (line    6)
* Ada 83 attributes <2>:                 Attribute Epsilon.  (line    6)
* Ada 83 attributes <3>:                 Attribute Safe_Large.
                                                             (line    6)
* Ada 83 attributes <4>:                 Attribute Emax.     (line    6)
* Ada 83 attributes <5>:                 Attribute Large.    (line    6)
* Ada 83 attributes <6>:                 Attribute Mantissa. (line    6)
* Ada 83 attributes <7>:                 Attribute Small.    (line    6)
* Ada 83 attributes:                     Attribute Safe_Emax.
                                                             (line    6)
* Ada 95 Language Reference Manual:      What This Reference Manual Contains.
                                                             (line   78)
* Ada Extensions:                        Pragma Extensions_Allowed.
                                                             (line    6)
* Ada.Characters.Handling:               RM A 1 52 Names of Predefined Numeric Types.
                                                             (line   14)
* Ada.Characters.Latin_9 (a-chlat9.ads): Ada Characters Latin_9 a-chlat9 ads.
                                                             (line    6)
* Ada.Characters.Wide_Latin_1 (a-cwila1.ads): Ada Characters Wide_Latin_1 a-cwila1 ads.
                                                             (line    6)
* Ada.Characters.Wide_Latin_9 (a-cwila1.ads): Ada Characters Wide_Latin_9 a-cwila1 ads.
                                                             (line    6)
* Ada.Characters.Wide_Wide_Latin_1 (a-chzla1.ads): Ada Characters Wide_Wide_Latin_1 a-chzla1 ads.
                                                             (line    6)
* Ada.Characters.Wide_Wide_Latin_9 (a-chzla9.ads): Ada Characters Wide_Wide_Latin_9 a-chzla9 ads.
                                                             (line    6)
* Ada.Command_Line.Environment (a-colien.ads): Ada Command_Line Environment a-colien ads.
                                                             (line    6)
* Ada.Command_Line.Remove (a-colire.ads): Ada Command_Line Remove a-colire ads.
                                                             (line    6)
* Ada.Command_Line.Response_File (a-clrefi.ads): Ada Command_Line Response_File a-clrefi ads.
                                                             (line    6)
* Ada.Containers.Bounded_Holders (a-coboho.ads): Ada Containers Bounded_Holders a-coboho ads.
                                                             (line    6)
* Ada.Containers.Formal_Doubly_Linked_Lists (a-cfdlli.ads): Ada Containers Formal_Doubly_Linked_Lists a-cfdlli ads.
                                                             (line    6)
* Ada.Containers.Formal_Hashed_Maps (a-cfhama.ads): Ada Containers Formal_Hashed_Maps a-cfhama ads.
                                                             (line    6)
* Ada.Containers.Formal_Hashed_Sets (a-cfhase.ads): Ada Containers Formal_Hashed_Sets a-cfhase ads.
                                                             (line    6)
* Ada.Containers.Formal_Indefinite_Vectors (a-cfinve.ads): Ada Containers Formal_Indefinite_Vectors a-cfinve ads.
                                                             (line    6)
* Ada.Containers.Formal_Ordered_Maps (a-cforma.ads): Ada Containers Formal_Ordered_Maps a-cforma ads.
                                                             (line    6)
* Ada.Containers.Formal_Ordered_Sets (a-cforse.ads): Ada Containers Formal_Ordered_Sets a-cforse ads.
                                                             (line    6)
* Ada.Containers.Formal_Vectors (a-cofove.ads): Ada Containers Formal_Vectors a-cofove ads.
                                                             (line    6)
* Ada.Direct_IO.C_Streams (a-diocst.ads): Ada Direct_IO C_Streams a-diocst ads.
                                                             (line    6)
* Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads): Ada Exceptions Is_Null_Occurrence a-einuoc ads.
                                                             (line    6)
* Ada.Exceptions.Last_Chance_Handler (a-elchha.ads): Ada Exceptions Last_Chance_Handler a-elchha ads.
                                                             (line    6)
* Ada.Exceptions.Traceback (a-exctra.ads): Ada Exceptions Traceback a-exctra ads.
                                                             (line    6)
* Ada.Sequential_IO.C_Streams (a-siocst.ads): Ada Sequential_IO C_Streams a-siocst ads.
                                                             (line    6)
* Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads): Ada Streams Stream_IO C_Streams a-ssicst ads.
                                                             (line    6)
* Ada.Strings.Unbounded.Text_IO (a-suteio.ads): Ada Strings Unbounded Text_IO a-suteio ads.
                                                             (line    6)
* Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads): Ada Strings Wide_Unbounded Wide_Text_IO a-swuwti ads.
                                                             (line    6)
* Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads): Ada Strings Wide_Wide_Unbounded Wide_Wide_Text_IO a-szuzti ads.
                                                             (line    6)
* Ada.Text_IO.C_Streams (a-tiocst.ads):  Ada Text_IO C_Streams a-tiocst ads.
                                                             (line    6)
* Ada.Text_IO.Reset_Standard_Files (a-tirsfi.ads): Ada Text_IO Reset_Standard_Files a-tirsfi ads.
                                                             (line    6)
* Ada.Wide_Characters.Unicode (a-wichun.ads): Ada Wide_Characters Unicode a-wichun ads.
                                                             (line    6)
* Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads): Ada Wide_Text_IO C_Streams a-wtcstr ads.
                                                             (line    6)
* Ada.Wide_Text_IO.Reset_Standard_Files (a-wrstfi.ads): Ada Wide_Text_IO Reset_Standard_Files a-wrstfi ads.
                                                             (line    6)
* Ada.Wide_Wide_Characters.Unicode (a-zchuni.ads): Ada Wide_Wide_Characters Unicode a-zchuni ads.
                                                             (line    6)
* Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads): Ada Wide_Wide_Text_IO C_Streams a-ztcstr ads.
                                                             (line    6)
* Ada.Wide_Wide_Text_IO.Reset_Standard_Files (a-zrstfi.ads): Ada Wide_Wide_Text_IO Reset_Standard_Files a-zrstfi ads.
                                                             (line    6)
* Ada_2012 configuration pragma:         Implementation of Ada 2012 Features.
                                                             (line    6)
* Address <1>:                           RM 13 5 3 7-8 Bit Ordering.
                                                             (line   16)
* Address:                               RM 13 7 37 Address as Private.
                                                             (line   10)
* Address Clause:                        Address Clauses.    (line    6)
* Address clauses:                       RM 13 2 6-8 Packed Types.
                                                             (line   33)
* Address image:                         System Address_Image s-addima ads.
                                                             (line    6)
* Address of subprogram code:            Attribute Code_Address.
                                                             (line    6)
* Address_Size:                          Attribute Address_Size.
                                                             (line    6)
* AI-0002 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1074)
* AI-0003 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  164)
* AI-0007 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  938)
* AI-0008 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  183)
* AI-0009 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  674)
* AI-0012 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  806)
* AI-0015 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  517)
* AI-0017 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  966)
* AI-0019 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  955)
* AI-0026 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  616)
* AI-0030 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  647)
* AI-0031 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1004)
* AI-0032 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  526)
* AI-0033 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  905)
* AI-0034 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  743)
* AI-0035 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  752)
* AI-0037 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  392)
* AI-0038 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1045)
* AI-0039 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  816)
* AI-0040 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  727)
* AI-0042 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  637)
* AI-0043 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  773)
* AI-0044 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1054)
* AI-0046 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  494)
* AI-0050 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  554)
* AI-0056 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1017)
* AI-0058 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  546)
* AI-0060 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  975)
* AI-0062 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  574)
* AI-0064 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  608)
* AI-0065 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  946)
* AI-0070 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  324)
* AI-0072 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  684)
* AI-0073 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  313)
* AI-0076 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  268)
* AI-0077 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  710)
* AI-0078 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  858)
* AI-0079 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line   41)
* AI-0080 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line   77)
* AI-0087 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  589)
* AI-0088 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  422)
* AI-0091 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line   49)
* AI-0093 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  193)
* AI-0095 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  825)
* AI-0096 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  200)
* AI-0097 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  287)
* AI-0098 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  350)
* AI-0099 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  598)
* AI-0100 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line   60)
* AI-0102 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  242)
* AI-0103 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  538)
* AI-0104 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  442)
* AI-0106 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  798)
* AI-0108 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  692)
* AI-0109 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  931)
* AI-0112 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  788)
* AI-0114 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  984)
* AI-0116 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  834)
* AI-0118 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  501)
* AI-0120 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  174)
* AI-0122 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  719)
* AI-0123 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  402)
* AI-0125 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  565)
* AI-0126 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  276)
* AI-0127 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1065)
* AI-0128 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  154)
* AI-0129 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  699)
* AI-0132 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  734)
* AI-0134 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  478)
* AI-0137 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1027)
* AI-0139-2 (Ada 2012 feature):          Implementation of Ada 2012 Features.
                                                             (line  469)
* AI-0146 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  842)
* AI-0147 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  375)
* AI-0152 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1151)
* AI-0157 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  450)
* AI-0158 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  251)
* AI-0161 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  913)
* AI-0162 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  342)
* AI-0163 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line   69)
* AI-0171 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1126)
* AI-0173 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  261)
* AI-0176 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line   33)
* AI-0177 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  892)
* AI-0178 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  581)
* AI-0179 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  459)
* AI-0181 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  211)
* AI-0182 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  222)
* AI-0183 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line   84)
* AI-0185 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  995)
* AI-0188 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  433)
* AI-0189 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1114)
* AI-0190 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1104)
* AI-0193 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  883)
* AI-0194 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  922)
* AI-0195 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  868)
* AI-0196 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  509)
* AI-0198 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  304)
* AI-0199 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  359)
* AI-0200 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  780)
* AI-0201 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  660)
* AI-0203 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  297)
* AI-0205 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  630)
* AI-0206 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1144)
* AI-0207 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  486)
* AI-0208 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  332)
* AI-0210 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1136)
* AI-0211 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1096)
* AI-0214 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  233)
* AI-0219 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  764)
* AI-0220 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  367)
* AI05-0216 (Ada 2012 feature):          Implementation of Ada 2012 Features.
                                                             (line 1085)
* Alignment <1>:                         Pragma Optimize_Alignment.
                                                             (line    6)
* Alignment <2>:                         Attribute Maximum_Alignment.
                                                             (line    6)
* Alignment <3>:                         Alignment Clauses.  (line   81)
* Alignment <4>:                         Attribute System_Allocator_Alignment.
                                                             (line    6)
* Alignment:                             Alignment Clauses.  (line   85)
* Alignment Clause:                      Alignment Clauses.  (line    6)
* Alignment clauses:                     RM 13 3 14-19 Address Clauses.
                                                             (line   38)
* Alignments of components:              Pragma Component_Alignment.
                                                             (line    6)
* allocator:                             Attribute System_Allocator_Alignment.
                                                             (line    6)
* Alternative Character Sets:            RM 2 8 17-19 Pragmas.
                                                             (line   17)
* AltiVec <1>:                           GNAT Altivec g-altive ads.
                                                             (line    6)
* AltiVec <2>:                           GNAT Altivec Vector_Types g-alvety ads.
                                                             (line    6)
* AltiVec <3>:                           GNAT Altivec Vector_Operations g-alveop ads.
                                                             (line    6)
* AltiVec <4>:                           GNAT Altivec Conversions g-altcon ads.
                                                             (line    6)
* AltiVec:                               GNAT Altivec Vector_Views g-alvevi ads.
                                                             (line    6)
* Annotate:                              Annotate.           (line    6)
* Anonymous access types:                Conventions and Anonymous Access Types.
                                                             (line    6)
* Argument passing mechanisms:           Pragma Export_Function.
                                                             (line    6)
* argument removal:                      Ada Command_Line Remove a-colire ads.
                                                             (line    6)
* Array packing:                         Pragma Implicit_Packing.
                                                             (line   34)
* Array splitter:                        GNAT Array_Split g-arrspl ads.
                                                             (line    6)
* Arrays <1>:                            RM 3 5 7 17 Float Types.
                                                             (line   24)
* Arrays <2>:                            GNAT Dynamic_Tables g-dyntab ads.
                                                             (line    6)
* Arrays:                                GNAT Table g-table ads.
                                                             (line    6)
* as private type:                       RM 13 5 3 7-8 Bit Ordering.
                                                             (line   16)
* Asm_Input:                             Attribute Asm_Input.
                                                             (line    6)
* Asm_Output:                            Attribute Asm_Output.
                                                             (line    6)
* Assert_Failure:                        System Assertions s-assert ads.
                                                             (line    6)
* Assertions <1>:                        System Assertions s-assert ads.
                                                             (line    6)
* Assertions <2>:                        Pragma Check_Policy.
                                                             (line    6)
* Assertions:                            Pragma Check.       (line    6)
* Async_Readers:                         Aspect Async_Readers.
                                                             (line    6)
* Async_Writers:                         Aspect Async_Writers.
                                                             (line    6)
* Atomic Synchronization <1>:            Pragma Enable_Atomic_Synchronization.
                                                             (line    6)
* Atomic Synchronization:                Pragma Disable_Atomic_Synchronization.
                                                             (line    6)
* Atomic_Always_Lock_Free:               Attribute Atomic_Always_Lock_Free.
                                                             (line    6)
* Attribute:                             Address Clauses.    (line   74)
* Attribute Loop_Entry:                  Pragma Unevaluated_Use_Of_Old.
                                                             (line    6)
* Attribute Old:                         Pragma Unevaluated_Use_Of_Old.
                                                             (line    6)
* AWK:                                   GNAT AWK g-awk ads. (line    6)
* Biased representation:                 Biased Representation.
                                                             (line    6)
* Big endian <1>:                        Attribute Default_Bit_Order.
                                                             (line    6)
* Big endian:                            Attribute Default_Scalar_Storage_Order.
                                                             (line    6)
* Bit:                                   Attribute Bit.      (line    6)
* bit ordering:                          Bit_Order Clauses.  (line    6)
* Bit ordering:                          RM 13 5 2 5 Storage Place Attributes.
                                                             (line   16)
* Bit_Order Clause:                      Bit_Order Clauses.  (line    6)
* Bit_Position:                          Attribute Bit_Position.
                                                             (line    6)
* Boolean_Entry_Barriers:                Simple_Barriers.    (line   12)
* Bounded Buffers:                       GNAT Bounded_Buffers g-boubuf ads.
                                                             (line    6)
* Bounded errors:                        RM 1 1 3 31 Child Units.
                                                             (line   13)
* Bounded-length strings:                RM A 3 2 49 Ada Characters Handling.
                                                             (line   13)
* Bubble sort <1>:                       GNAT Bubble_Sort_A g-busora ads.
                                                             (line    6)
* Bubble sort <2>:                       GNAT Bubble_Sort g-bubsor ads.
                                                             (line    6)
* Bubble sort:                           GNAT Bubble_Sort_G g-busorg ads.
                                                             (line    6)
* byte ordering:                         Effect of Bit_Order on Byte Ordering.
                                                             (line    6)
* Byte swapping:                         GNAT Byte_Swapping g-bytswa ads.
                                                             (line    6)
* C:                                     RM B 2 12-13 Package Interfaces.
                                                             (line   22)
* C Streams:                             Ada Direct_IO C_Streams a-diocst ads.
                                                             (line    6)
* C streams:                             Interfaces C Streams i-cstrea ads.
                                                             (line    6)
* C Streams <1>:                         Ada Wide_Wide_Text_IO C_Streams a-ztcstr ads.
                                                             (line    6)
* C Streams <2>:                         Ada Sequential_IO C_Streams a-siocst ads.
                                                             (line    6)
* C Streams <3>:                         Ada Wide_Text_IO C_Streams a-wtcstr ads.
                                                             (line    6)
* C Streams <4>:                         Ada Text_IO C_Streams a-tiocst ads.
                                                             (line    6)
* C Streams:                             Ada Streams Stream_IO C_Streams a-ssicst ads.
                                                             (line    6)
* Calendar <1>:                          GNAT Calendar g-calend ads.
                                                             (line    6)
* Calendar:                              GNAT Calendar Time_IO g-catiio ads.
                                                             (line    6)
* casing:                                Pragma External_Name_Casing.
                                                             (line    6)
* Casing of External names:              Pragma External_Name_Casing.
                                                             (line    6)
* Casing utilities:                      GNAT Case_Util g-casuti ads.
                                                             (line    6)
* CGI (Common Gateway Interface):        GNAT CGI g-cgi ads. (line    6)
* CGI (Common Gateway Interface) cookie support: GNAT CGI Cookie g-cgicoo ads.
                                                             (line    6)
* CGI (Common Gateway Interface) debugging: GNAT CGI Debug g-cgideb ads.
                                                             (line    6)
* Character handling (`GNAT.Case_Util`): GNAT Case_Util g-casuti ads.
                                                             (line    6)
* Character Sets:                        RM 2 8 17-19 Pragmas.
                                                             (line   17)
* Check names:                           Pragma Check_Name.  (line    6)
* Check pragma control:                  Pragma Check_Policy.
                                                             (line    6)
* Checks <1>:                            Pragma Precondition.
                                                             (line    6)
* Checks <2>:                            Pragma Post.        (line    6)
* Checks <3>:                            RM 11 4 1 19 Exception Information.
                                                             (line   23)
* Checks <4>:                            Pragma Pre_Class.   (line    6)
* Checks <5>:                            Pragma Postcondition.
                                                             (line    6)
* Checks <6>:                            Pragma Post_Class.  (line    6)
* Checks:                                Pragma Pre.         (line    6)
* Child Units:                           RM 1 1 3 20 Error Detection.
                                                             (line   13)
* COBOL:                                 RM B 3 63-71 Interfacing with C.
                                                             (line   59)
* COBOL support:                         RM E 5 28-29 Partition Communication Subsystem.
                                                             (line   19)
* Code_Address:                          Attribute Code_Address.
                                                             (line    6)
* Command line <1>:                      GNAT Command_Line g-comlin ads.
                                                             (line    6)
* Command line <2>:                      Ada Command_Line Response_File a-clrefi ads.
                                                             (line    6)
* Command line <3>:                      Ada Command_Line Remove a-colire ads.
                                                             (line    6)
* Command line:                          Ada Command_Line Response_File a-clrefi ads.
                                                             (line    6)
* Compatibility (between Ada 83 and Ada 95 / Ada 2005 / Ada 2012): Compatibility with Ada 83.
                                                             (line    6)
* Compatibility between Ada 95 and Ada 2005: Compatibility between Ada 95 and Ada 2005.
                                                             (line    6)
* Compilation_Date:                      Compilation_Date.   (line    6)
* Compilation_Time:                      Compilation_Time.   (line    6)
* Compiler Version:                      GNAT Compiler_Version g-comver ads.
                                                             (line    6)
* Compiler_Version:                      Attribute Compiler_Version.
                                                             (line    6)
* complex arithmetic:                    RM G 2 4 19 Accuracy Requirements.
                                                             (line   17)
* Complex arithmetic accuracy:           RM G 2 4 19 Accuracy Requirements.
                                                             (line   17)
* Complex elementary functions:          RM G 1 1 56-58 Complex Types.
                                                             (line   55)
* Complex types:                         RM G Numerics.      (line   16)
* Component Clause:                      Record Representation Clauses.
                                                             (line   11)
* Component_Size (in pragma Component_Alignment): Pragma Component_Alignment.
                                                             (line   21)
* Component_Size Clause:                 Component_Size Clauses.
                                                             (line    6)
* Component_Size clauses:                RM 13 3 50-56 Size Clauses.
                                                             (line   40)
* Component_Size_4 (in pragma Component_Alignment): Pragma Component_Alignment.
                                                             (line   31)
* configuration pragma Ada_2012:         Implementation of Ada 2012 Features.
                                                             (line    6)
* Constrained:                           Attribute Constrained.
                                                             (line    6)
* Contract cases:                        Pragma Contract_Cases.
                                                             (line    6)
* Contract_Cases:                        Aspect Contract_Cases.
                                                             (line    6)
* control:                               Pragma Check_Policy.
                                                             (line    6)
* Controlling assertions:                Pragma Check_Policy.
                                                             (line    6)
* Convention:                            Effect of Convention on Representation.
                                                             (line    6)
* Convention for anonymous access types: Conventions and Anonymous Access Types.
                                                             (line    6)
* Conventions <1>:                       Conventions.        (line    6)
* Conventions:                           Pragma Convention_Identifier.
                                                             (line    6)
* Conversion:                            System Wch_Cnv s-wchcnv ads.
                                                             (line    6)
* Cookie support in CGI:                 GNAT CGI Cookie g-cgicoo ads.
                                                             (line    6)
* CRC32:                                 GNAT CRC32 g-crc32 ads.
                                                             (line    6)
* Current exception:                     GNAT Current_Exception g-curexc ads.
                                                             (line    6)
* Current time:                          GNAT Time_Stamp g-timsta ads.
                                                             (line    6)
* Cyclic Redundancy Check:               GNAT CRC32 g-crc32 ads.
                                                             (line    6)
* Debug pools:                           GNAT Debug_Pools g-debpoo ads.
                                                             (line    6)
* Debugging <1>:                         GNAT Debug_Utilities g-debuti ads.
                                                             (line    6)
* Debugging <2>:                         GNAT Debug_Pools g-debpoo ads.
                                                             (line    6)
* Debugging:                             GNAT Exception_Traces g-exctra ads.
                                                             (line    6)
* debugging with Initialize_Scalars:     Pragma Initialize_Scalars.
                                                             (line    6)
* DEC Ada 83:                            Pragma Extend_System.
                                                             (line    6)
* Dec Ada 83 casing compatibility:       Pragma External_Name_Casing.
                                                             (line    6)
* Decimal radix support:                 RM F 7 COBOL Support.
                                                             (line   16)
* Decoding strings <1>:                  GNAT Decode_String g-decstr ads.
                                                             (line    6)
* Decoding strings:                      GNAT Decode_UTF8_String g-deutst ads.
                                                             (line    6)
* Decoding UTF-8 strings:                GNAT Decode_UTF8_String g-deutst ads.
                                                             (line    6)
* default:                               Alignment Clauses.  (line   81)
* Default (in pragma Component_Alignment): Pragma Component_Alignment.
                                                             (line   41)
* default settings:                      Pragma Optimize_Alignment.
                                                             (line    6)
* Default_Bit_Order:                     Attribute Default_Bit_Order.
                                                             (line    6)
* Default_Scalar_Storage_Order <1>:      Pragma Default_Scalar_Storage_Order.
                                                             (line    6)
* Default_Scalar_Storage_Order:          Attribute Default_Scalar_Storage_Order.
                                                             (line    6)
* Default_Storage_Pool:                  Pragma Default_Storage_Pool.
                                                             (line    6)
* Deferring aborts:                      Pragma Abort_Defer. (line    6)
* defining:                              Pragma Check_Name.  (line    6)
* Defining check names:                  Pragma Check_Name.  (line    6)
* Depends:                               Aspect Depends.     (line    6)
* Deref:                                 Attribute Deref.    (line    6)
* Descriptor:                            Attribute Descriptor_Size.
                                                             (line    6)
* Descriptor_Size:                       Attribute Descriptor_Size.
                                                             (line    6)
* determination of:                      Determining the Representations chosen by GNAT.
                                                             (line    6)
* Dimension:                             Aspect Dimension.   (line    6)
* Dimension_System:                      Aspect Dimension_System.
                                                             (line    6)
* Directory operations:                  GNAT Directory_Operations g-dirope ads.
                                                             (line    6)
* Directory operations iteration:        GNAT Directory_Operations Iteration g-diopit ads.
                                                             (line    6)
* Discriminants:                         Attribute Has_Discriminants.
                                                             (line    6)
* Distribution Systems Annex:            GNAT Implementation of Shared Passive Packages.
                                                             (line   15)
* Dope vector:                           Attribute Descriptor_Size.
                                                             (line    6)
* Dump Memory:                           GNAT Memory_Dump g-memdum ads.
                                                             (line    6)
* Duration'Small:                        RM 3 6 2 11 Multidimensional Arrays.
                                                             (line   15)
* effect on representation:              Effect of Convention on Representation.
                                                             (line    6)
* Effective_Reads:                       Aspect Effective_Reads.
                                                             (line    6)
* Effective_Writes:                      Aspect Effective_Writes.
                                                             (line    6)
* Elab_Body:                             Attribute Elab_Body.
                                                             (line    6)
* Elab_Spec:                             Attribute Elab_Spec.
                                                             (line    6)
* Elab_Subp_Body:                        Attribute Elab_Subp_Body.
                                                             (line    6)
* Elaborated:                            Attribute Elaborated.
                                                             (line    6)
* Elaboration control:                   Pragma Elaboration_Checks.
                                                             (line    6)
* Elimination of unused subprograms:     Pragma Eliminate.   (line    6)
* Emax:                                  Attribute Emax.     (line    6)
* Enabled:                               Attribute Enabled.  (line    6)
* Enclosing_Entity:                      Enclosing_Entity.   (line    6)
* Encoding strings <1>:                  GNAT Encode_UTF8_String g-enutst ads.
                                                             (line    6)
* Encoding strings:                      GNAT Encode_String g-encstr ads.
                                                             (line    6)
* Encoding UTF-8 strings:                GNAT Encode_UTF8_String g-enutst ads.
                                                             (line    6)
* Endianness <1>:                        GNAT Byte_Swapping g-bytswa ads.
                                                             (line    6)
* Endianness:                            Attribute Scalar_Storage_Order.
                                                             (line    6)
* Entry queuing policies:                RM D 3 17 Locking Policies.
                                                             (line   13)
* Enum_Rep:                              Attribute Enum_Rep. (line    6)
* Enum_Val:                              Attribute Enum_Val. (line    6)
* enumeration:                           RM 13 3 71-73 Component Size Clauses.
                                                             (line   24)
* Enumeration representation clauses:    RM 13 3 71-73 Component Size Clauses.
                                                             (line   24)
* Enumeration values:                    RM 3 5 4 29 Integer Types.
                                                             (line   13)
* Environment entries:                   Ada Command_Line Environment a-colien ads.
                                                             (line    6)
* Epsilon:                               Attribute Epsilon.  (line    6)
* Error detection:                       Implementation Advice.
                                                             (line   28)
* exception:                             Pragma Prefix_Exception_Messages.
                                                             (line    6)
* Exception:                             GNAT Most_Recent_Exception g-moreex ads.
                                                             (line    6)
* exception:                             System Assertions s-assert ads.
                                                             (line    6)
* Exception actions:                     GNAT Exception_Actions g-excact ads.
                                                             (line    6)
* Exception information:                 RM 10 2 1 12 Consistent Representation.
                                                             (line   19)
* Exception retrieval:                   GNAT Current_Exception g-curexc ads.
                                                             (line    6)
* Exception traces:                      GNAT Exception_Traces g-exctra ads.
                                                             (line    6)
* Exception_Information':                Exception_Information.
                                                             (line    6)
* Exception_Message <1>:                 Pragma Prefix_Exception_Messages.
                                                             (line    6)
* Exception_Message:                     Exception_Message.  (line    6)
* Exception_Name:                        Exception_Name.     (line    6)
* exceptions:                            GNAT Exceptions g-expect ads.
                                                             (line    6)
* Exceptions:                            GNAT Exceptions g-expect ads.
                                                             (line    6)
* Export <1>:                            Address Clauses.    (line  107)
* Export:                                RM A 10 7 23 Get_Immediate.
                                                             (line   20)
* extendable <1>:                        GNAT Table g-table ads.
                                                             (line    6)
* extendable:                            GNAT Dynamic_Tables g-dyntab ads.
                                                             (line    6)
* extending:                             Pragma Extend_System.
                                                             (line    6)
* extensions for unbounded strings:      Ada Strings Unbounded Text_IO a-suteio ads.
                                                             (line    6)
* extensions for unbounded wide strings: Ada Strings Wide_Unbounded Wide_Text_IO a-swuwti ads.
                                                             (line    6)
* extensions for unbounded wide wide strings: Ada Strings Wide_Wide_Unbounded Wide_Wide_Text_IO a-szuzti ads.
                                                             (line    6)
* External Names:                        Pragma External_Name_Casing.
                                                             (line    6)
* Fast_Math:                             Attribute Fast_Math.
                                                             (line    6)
* Favor_Top_Level:                       Aspect Favor_Top_Level.
                                                             (line    6)
* File:                                  File.               (line    6)
* File locking:                          GNAT Lock_Files g-locfil ads.
                                                             (line    6)
* Fixed_Value:                           Attribute Fixed_Value.
                                                             (line    6)
* Float types:                           RM 3 5 5 8 Enumeration Values.
                                                             (line   16)
* Floating-point overflow:               Pragma Check_Float_Overflow.
                                                             (line    6)
* Floating-Point Processor:              GNAT Float_Control g-flocon ads.
                                                             (line    6)
* foreign:                               GNAT Threads g-thread ads.
                                                             (line    6)
* Foreign threads:                       GNAT Threads g-thread ads.
                                                             (line    6)
* Formal container for doubly linked lists: Ada Containers Formal_Doubly_Linked_Lists a-cfdlli ads.
                                                             (line    6)
* Formal container for hashed maps:      Ada Containers Formal_Hashed_Maps a-cfhama ads.
                                                             (line    6)
* Formal container for hashed sets:      Ada Containers Formal_Hashed_Sets a-cfhase ads.
                                                             (line    6)
* Formal container for ordered maps:     Ada Containers Formal_Ordered_Maps a-cforma ads.
                                                             (line    6)
* Formal container for ordered sets:     Ada Containers Formal_Ordered_Sets a-cforse ads.
                                                             (line    6)
* Formal container for vectors <1>:      Ada Containers Formal_Vectors a-cofove ads.
                                                             (line    6)
* Formal container for vectors <2>:      Ada Containers Bounded_Holders a-coboho ads.
                                                             (line    6)
* Formal container for vectors:          Ada Containers Formal_Indefinite_Vectors a-cfinve ads.
                                                             (line    6)
* Formatted String:                      GNAT Formatted_String g-forstr ads.
                                                             (line    6)
* Fortran:                               RM B 4 95-98 Interfacing with COBOL.
                                                             (line   28)
* From_Any:                              Attribute From_Any. (line    6)
* Get_Immediate <1>:                     Get_Immediate.      (line    6)
* Get_Immediate <2>:                     RM A 5 2 46-47 Random Number Generation.
                                                             (line   22)
* Get_Immediate:                         Interfaces VxWorks IO i-vxwoio ads.
                                                             (line    6)
* global:                                System Pool_Global s-pooglo ads.
                                                             (line    6)
* Global:                                Aspect Global.      (line    6)
* Global storage pool:                   System Pool_Global s-pooglo ads.
                                                             (line    6)
* GNAT Extensions:                       Pragma Extensions_Allowed.
                                                             (line    6)
* GNAT.Altivec (g-altive.ads):           GNAT Altivec g-altive ads.
                                                             (line    6)
* GNAT.Altivec.Conversions (g-altcon.ads): GNAT Altivec Conversions g-altcon ads.
                                                             (line    6)
* GNAT.Altivec.Vector_Operations (g-alveop.ads): GNAT Altivec Vector_Operations g-alveop ads.
                                                             (line    6)
* GNAT.Altivec.Vector_Types (g-alvety.ads): GNAT Altivec Vector_Types g-alvety ads.
                                                             (line    6)
* GNAT.Altivec.Vector_Views (g-alvevi.ads): GNAT Altivec Vector_Views g-alvevi ads.
                                                             (line    6)
* GNAT.Array_Split (g-arrspl.ads):       GNAT Array_Split g-arrspl ads.
                                                             (line    6)
* GNAT.AWK (g-awk.ads):                  GNAT AWK g-awk ads. (line    6)
* GNAT.Bounded_Buffers (g-boubuf.ads):   GNAT Bounded_Buffers g-boubuf ads.
                                                             (line    6)
* GNAT.Bounded_Mailboxes (g-boumai.ads): GNAT Bounded_Mailboxes g-boumai ads.
                                                             (line    6)
* GNAT.Bubble_Sort (g-bubsor.ads):       GNAT Bubble_Sort g-bubsor ads.
                                                             (line    6)
* GNAT.Bubble_Sort_A (g-busora.ads):     GNAT Bubble_Sort_A g-busora ads.
                                                             (line    6)
* GNAT.Bubble_Sort_G (g-busorg.ads):     GNAT Bubble_Sort_G g-busorg ads.
                                                             (line    6)
* GNAT.Byte_Order_Mark (g-byorma.ads):   GNAT Byte_Order_Mark g-byorma ads.
                                                             (line    6)
* GNAT.Byte_Swapping (g-bytswa.ads):     GNAT Byte_Swapping g-bytswa ads.
                                                             (line    6)
* GNAT.Calendar (g-calend.ads):          GNAT Calendar g-calend ads.
                                                             (line    6)
* GNAT.Calendar.Time_IO (g-catiio.ads):  GNAT Calendar Time_IO g-catiio ads.
                                                             (line    6)
* GNAT.Case_Util (g-casuti.ads):         GNAT Case_Util g-casuti ads.
                                                             (line    6)
* GNAT.CGI (g-cgi.ads):                  GNAT CGI g-cgi ads. (line    6)
* GNAT.CGI.Cookie (g-cgicoo.ads):        GNAT CGI Cookie g-cgicoo ads.
                                                             (line    6)
* GNAT.CGI.Debug (g-cgideb.ads):         GNAT CGI Debug g-cgideb ads.
                                                             (line    6)
* GNAT.Command_Line (g-comlin.ads):      GNAT Command_Line g-comlin ads.
                                                             (line    6)
* GNAT.Compiler_Version (g-comver.ads):  GNAT Compiler_Version g-comver ads.
                                                             (line    6)
* GNAT.CRC32 (g-crc32.ads):              GNAT CRC32 g-crc32 ads.
                                                             (line    6)
* GNAT.Ctrl_C (g-ctrl_c.ads):            GNAT Ctrl_C g-ctrl_c ads.
                                                             (line    6)
* GNAT.Current_Exception (g-curexc.ads): GNAT Current_Exception g-curexc ads.
                                                             (line    6)
* GNAT.Debug_Pools (g-debpoo.ads):       GNAT Debug_Pools g-debpoo ads.
                                                             (line    6)
* GNAT.Debug_Utilities (g-debuti.ads):   GNAT Debug_Utilities g-debuti ads.
                                                             (line    6)
* GNAT.Decode_String (g-decstr.ads):     GNAT Decode_String g-decstr ads.
                                                             (line    6)
* GNAT.Decode_UTF8_String (g-deutst.ads): GNAT Decode_UTF8_String g-deutst ads.
                                                             (line    6)
* GNAT.Directory_Operations (g-dirope.ads): GNAT Directory_Operations g-dirope ads.
                                                             (line    6)
* GNAT.Directory_Operations.Iteration (g-diopit.ads): GNAT Directory_Operations Iteration g-diopit ads.
                                                             (line    6)
* GNAT.Dynamic_HTables (g-dynhta.ads):   GNAT Dynamic_HTables g-dynhta ads.
                                                             (line    6)
* GNAT.Dynamic_Tables (g-dyntab.ads):    GNAT Dynamic_Tables g-dyntab ads.
                                                             (line    6)
* GNAT.Encode_String (g-encstr.ads):     GNAT Encode_String g-encstr ads.
                                                             (line    6)
* GNAT.Encode_UTF8_String (g-enutst.ads): GNAT Encode_UTF8_String g-enutst ads.
                                                             (line    6)
* GNAT.Exception_Actions (g-excact.ads): GNAT Exception_Actions g-excact ads.
                                                             (line    6)
* GNAT.Exception_Traces (g-exctra.ads):  GNAT Exception_Traces g-exctra ads.
                                                             (line    6)
* GNAT.Exceptions (g-expect.ads):        GNAT Exceptions g-expect ads.
                                                             (line    6)
* GNAT.Expect (g-expect.ads):            GNAT Expect g-expect ads.
                                                             (line    6)
* GNAT.Expect.TTY (g-exptty.ads):        GNAT Expect TTY g-exptty ads.
                                                             (line    6)
* GNAT.Float_Control (g-flocon.ads):     GNAT Float_Control g-flocon ads.
                                                             (line    6)
* GNAT.Formatted_String (g-forstr.ads):  GNAT Formatted_String g-forstr ads.
                                                             (line    6)
* GNAT.Heap_Sort (g-heasor.ads):         GNAT Heap_Sort g-heasor ads.
                                                             (line    6)
* GNAT.Heap_Sort_A (g-hesora.ads):       GNAT Heap_Sort_A g-hesora ads.
                                                             (line    6)
* GNAT.Heap_Sort_G (g-hesorg.ads):       GNAT Heap_Sort_G g-hesorg ads.
                                                             (line    6)
* GNAT.HTable (g-htable.ads):            GNAT HTable g-htable ads.
                                                             (line    6)
* GNAT.IO (g-io.ads):                    GNAT IO g-io ads.   (line    6)
* GNAT.IO_Aux (g-io_aux.ads):            GNAT IO_Aux g-io_aux ads.
                                                             (line    6)
* GNAT.Lock_Files (g-locfil.ads):        GNAT Lock_Files g-locfil ads.
                                                             (line    6)
* GNAT.MBBS_Discrete_Random (g-mbdira.ads): GNAT MBBS_Discrete_Random g-mbdira ads.
                                                             (line    6)
* GNAT.MBBS_Float_Random (g-mbflra.ads): GNAT MBBS_Float_Random g-mbflra ads.
                                                             (line    6)
* GNAT.MD5 (g-md5.ads):                  GNAT MD5 g-md5 ads. (line    6)
* GNAT.Memory_Dump (g-memdum.ads):       GNAT Memory_Dump g-memdum ads.
                                                             (line    6)
* GNAT.Most_Recent_Exception (g-moreex.ads): GNAT Most_Recent_Exception g-moreex ads.
                                                             (line    6)
* GNAT.OS_Lib (g-os_lib.ads):            GNAT OS_Lib g-os_lib ads.
                                                             (line    6)
* GNAT.Perfect_Hash_Generators (g-pehage.ads): GNAT Perfect_Hash_Generators g-pehage ads.
                                                             (line    6)
* GNAT.Random_Numbers (g-rannum.ads):    GNAT Random_Numbers g-rannum ads.
                                                             (line    6)
* GNAT.Regexp (g-regexp.ads):            GNAT Regexp g-regexp ads.
                                                             (line    6)
* GNAT.Registry (g-regist.ads):          GNAT Registry g-regist ads.
                                                             (line    6)
* GNAT.Regpat (g-regpat.ads):            GNAT Regpat g-regpat ads.
                                                             (line    6)
* GNAT.Rewrite_Data (g-rewdat.ads):      GNAT Rewrite_Data g-rewdat ads.
                                                             (line    6)
* GNAT.Secondary_Stack_Info (g-sestin.ads): GNAT Secondary_Stack_Info g-sestin ads.
                                                             (line    6)
* GNAT.Semaphores (g-semaph.ads):        GNAT Semaphores g-semaph ads.
                                                             (line    6)
* GNAT.Serial_Communications (g-sercom.ads): GNAT Serial_Communications g-sercom ads.
                                                             (line    6)
* GNAT.SHA1 (g-sha1.ads):                GNAT SHA1 g-sha1 ads.
                                                             (line    6)
* GNAT.SHA224 (g-sha224.ads):            GNAT SHA224 g-sha224 ads.
                                                             (line    6)
* GNAT.SHA256 (g-sha256.ads):            GNAT SHA256 g-sha256 ads.
                                                             (line    6)
* GNAT.SHA384 (g-sha384.ads):            GNAT SHA384 g-sha384 ads.
                                                             (line    6)
* GNAT.SHA512 (g-sha512.ads):            GNAT SHA512 g-sha512 ads.
                                                             (line    6)
* GNAT.Signals (g-signal.ads):           GNAT Signals g-signal ads.
                                                             (line    6)
* GNAT.Sockets (g-socket.ads):           GNAT Sockets g-socket ads.
                                                             (line    6)
* GNAT.Source_Info (g-souinf.ads):       GNAT Source_Info g-souinf ads.
                                                             (line    6)
* GNAT.Spelling_Checker (g-speche.ads):  GNAT Spelling_Checker g-speche ads.
                                                             (line    6)
* GNAT.Spelling_Checker_Generic (g-spchge.ads): GNAT Spelling_Checker_Generic g-spchge ads.
                                                             (line    6)
* GNAT.Spitbol (g-spitbo.ads):           GNAT Spitbol g-spitbo ads.
                                                             (line    6)
* GNAT.Spitbol.Patterns (g-spipat.ads):  GNAT Spitbol Patterns g-spipat ads.
                                                             (line    6)
* GNAT.Spitbol.Table_Boolean (g-sptabo.ads): GNAT Spitbol Table_Boolean g-sptabo ads.
                                                             (line    6)
* GNAT.Spitbol.Table_Integer (g-sptain.ads): GNAT Spitbol Table_Integer g-sptain ads.
                                                             (line    6)
* GNAT.Spitbol.Table_VString (g-sptavs.ads): GNAT Spitbol Table_VString g-sptavs ads.
                                                             (line    6)
* GNAT.SSE (g-sse.ads):                  GNAT SSE g-sse ads. (line    6)
* GNAT.SSE.Vector_Types (g-ssvety.ads):  GNAT SSE Vector_Types g-ssvety ads.
                                                             (line    6)
* GNAT.String_Split (g-strspl.ads):      GNAT String_Split g-strspl ads.
                                                             (line    6)
* GNAT.Strings (g-string.ads):           GNAT Strings g-string ads.
                                                             (line    6)
* GNAT.Table (g-table.ads):              GNAT Table g-table ads.
                                                             (line    6)
* GNAT.Task_Lock (g-tasloc.ads):         GNAT Task_Lock g-tasloc ads.
                                                             (line    6)
* GNAT.Threads (g-thread.ads):           GNAT Threads g-thread ads.
                                                             (line    6)
* GNAT.Time_Stamp (g-timsta.ads):        GNAT Time_Stamp g-timsta ads.
                                                             (line    6)
* GNAT.Traceback (g-traceb.ads):         GNAT Traceback g-traceb ads.
                                                             (line    6)
* GNAT.Traceback.Symbolic (g-trasym.ads): GNAT Traceback Symbolic g-trasym ads.
                                                             (line    6)
* GNAT.UTF_32 (g-table.ads):             GNAT UTF_32 g-table ads.
                                                             (line    6)
* GNAT.Wide_Spelling_Checker (g-u3spch.ads): GNAT Wide_Spelling_Checker g-u3spch ads.
                                                             (line    6)
* GNAT.Wide_Spelling_Checker (g-wispch.ads): GNAT Wide_Spelling_Checker g-wispch ads.
                                                             (line    6)
* GNAT.Wide_String_Split (g-wistsp.ads): GNAT Wide_String_Split g-wistsp ads.
                                                             (line    6)
* GNAT.Wide_Wide_Spelling_Checker (g-zspche.ads): GNAT Wide_Wide_Spelling_Checker g-zspche ads.
                                                             (line    6)
* GNAT.Wide_Wide_String_Split (g-zistsp.ads): GNAT Wide_Wide_String_Split g-zistsp ads.
                                                             (line    6)
* handling long command lines:           Ada Command_Line Response_File a-clrefi ads.
                                                             (line    6)
* Handling of Records with Holes:        Handling of Records with Holes.
                                                             (line    6)
* Has_Access_Values:                     Attribute Has_Access_Values.
                                                             (line    6)
* Has_Discriminants:                     Attribute Has_Discriminants.
                                                             (line    6)
* Hash functions:                        GNAT Perfect_Hash_Generators g-pehage ads.
                                                             (line    6)
* Hash tables <1>:                       GNAT Dynamic_HTables g-dynhta ads.
                                                             (line    6)
* Hash tables:                           GNAT HTable g-htable ads.
                                                             (line    6)
* Heap usage:                            RM 13 9 14-17 Unchecked Conversion.
                                                             (line   35)
* I/O interfacing:                       Interfaces VxWorks IO i-vxwoio ads.
                                                             (line    6)
* IBM Packed Format:                     Interfaces Packed_Decimal i-pacdec ads.
                                                             (line    6)
* Image:                                 System Address_Image s-addima ads.
                                                             (line    6)
* Img:                                   Attribute Img.      (line    6)
* Immediate_Reclamation:                 Immediate_Reclamation.
                                                             (line    6)
* implicit:                              RM 13 9 14-17 Unchecked Conversion.
                                                             (line   35)
* Import:                                Address Clauses.    (line  112)
* Initial_Condition:                     Aspect Initial_Condition.
                                                             (line    6)
* Initialization:                        Pragma Suppress_Initialization.
                                                             (line    6)
* Initializes:                           Aspect Initializes. (line    6)
* Inline_Always:                         Aspect Inline_Always.
                                                             (line    6)
* Input/Output facilities <1>:           GNAT IO_Aux g-io_aux ads.
                                                             (line    6)
* Input/Output facilities:               GNAT IO g-io ads.   (line    6)
* Integer maps:                          GNAT Spitbol Table_Integer g-sptain ads.
                                                             (line    6)
* Integer types:                         RM 3 5 2 5 Alternative Character Sets.
                                                             (line   24)
* Integer_Value:                         Attribute Integer_Value.
                                                             (line    6)
* Interfaces:                            RM B 1 39-41 Pragma Export.
                                                             (line   35)
* Interfaces.C.Extensions (i-cexten.ads): Interfaces C Extensions i-cexten ads.
                                                             (line    6)
* Interfaces.C.Streams (i-cstrea.ads):   Interfaces C Streams i-cstrea ads.
                                                             (line    6)
* Interfaces.Packed_Decimal (i-pacdec.ads): Interfaces Packed_Decimal i-pacdec ads.
                                                             (line    6)
* Interfaces.VxWorks (i-vxwork.ads):     Interfaces VxWorks i-vxwork ads.
                                                             (line    6)
* Interfaces.VxWorks.IO (i-vxwoio.ads):  Interfaces VxWorks IO i-vxwoio ads.
                                                             (line    6)
* interfacing <1>:                       Interfaces C Streams i-cstrea ads.
                                                             (line    6)
* interfacing:                           Interfaces VxWorks i-vxwork ads.
                                                             (line    6)
* Interfacing to C++ <1>:                Pragma Propagate_Exceptions.
                                                             (line    6)
* Interfacing to C++:                    Pragma CPP_Virtual. (line    6)
* Interfacing to VxWorks:                Interfaces VxWorks i-vxwork ads.
                                                             (line    6)
* Interfacing to VxWorks' I/O:           Interfaces VxWorks IO i-vxwoio ads.
                                                             (line    6)
* interfacing with <1>:                  RM B 3 63-71 Interfacing with C.
                                                             (line   59)
* interfacing with <2>:                  RM B 4 95-98 Interfacing with COBOL.
                                                             (line   28)
* interfacing with:                      RM B 2 12-13 Package Interfaces.
                                                             (line   22)
* Interfacing with `Text_IO`:            Ada Text_IO C_Streams a-tiocst ads.
                                                             (line    6)
* Interfacing with `Wide_Text_IO`:       Ada Wide_Text_IO C_Streams a-wtcstr ads.
                                                             (line    6)
* Interfacing with `Wide_Wide_Text_IO`:  Ada Wide_Wide_Text_IO C_Streams a-ztcstr ads.
                                                             (line    6)
* Interfacing with C++ <1>:              Pragma CPP_Vtable.  (line    6)
* Interfacing with C++ <2>:              Pragma CPP_Constructor.
                                                             (line    6)
* Interfacing with C++:                  Pragma CPP_Class.   (line    6)
* Interfacing with Direct_IO:            Ada Direct_IO C_Streams a-diocst ads.
                                                             (line    6)
* Interfacing with Sequential_IO:        Ada Sequential_IO C_Streams a-siocst ads.
                                                             (line    6)
* Interfacing with Stream_IO:            Ada Streams Stream_IO C_Streams a-ssicst ads.
                                                             (line    6)
* Interrupt:                             GNAT Ctrl_C g-ctrl_c ads.
                                                             (line    6)
* Interrupt support:                     RM C 1 10-16 Access to Machine Operations.
                                                             (line   40)
* Interrupts:                            RM C 3 1 20-21 Protected Procedure Handlers.
                                                             (line   17)
* Intrinsic operator:                    Intrinsic Operators.
                                                             (line    6)
* Intrinsic Subprograms:                 Intrinsic Subprograms.
                                                             (line    6)
* Invalid representations:               Pragma Assume_No_Invalid_Values.
                                                             (line    6)
* Invalid values:                        Pragma Assume_No_Invalid_Values.
                                                             (line    6)
* Invalid_Value:                         Attribute Invalid_Value.
                                                             (line    6)
* Invariant:                             Aspect Invariant.   (line    6)
* Invariant'Class:                       Aspect Invariant'Class.
                                                             (line    6)
* IO support <1>:                        Ada Strings Unbounded Text_IO a-suteio ads.
                                                             (line    6)
* IO support <2>:                        Ada Strings Wide_Unbounded Wide_Text_IO a-swuwti ads.
                                                             (line    6)
* IO support:                            Ada Strings Wide_Wide_Unbounded Wide_Wide_Text_IO a-szuzti ads.
                                                             (line    6)
* Iterable <1>:                          Aspect Iterable.    (line    6)
* Iterable:                              Attribute Iterable. (line    6)
* Large:                                 Attribute Large.    (line    6)
* Latin-1:                               Changed semantics.  (line   12)
* Latin_1 constants for Wide_Character:  Ada Characters Wide_Latin_1 a-cwila1 ads.
                                                             (line    6)
* Latin_1 constants for Wide_Wide_Character: Ada Characters Wide_Wide_Latin_1 a-chzla1 ads.
                                                             (line    6)
* Latin_9 constants for Character:       Ada Characters Latin_9 a-chlat9 ads.
                                                             (line    6)
* Latin_9 constants for Wide_Character:  Ada Characters Wide_Latin_9 a-cwila1 ads.
                                                             (line    6)
* Latin_9 constants for Wide_Wide_Character: Ada Characters Wide_Wide_Latin_9 a-chzla9 ads.
                                                             (line    6)
* Library_Level:                         Attribute Library_Level.
                                                             (line    6)
* License checking:                      Pragma License.     (line    6)
* Line:                                  Line.               (line    6)
* Linker_Section:                        Aspect Linker_Section.
                                                             (line    6)
* Little endian <1>:                     Attribute Default_Scalar_Storage_Order.
                                                             (line    6)
* Little endian:                         Attribute Default_Bit_Order.
                                                             (line    6)
* local:                                 System Pool_Local s-pooloc ads.
                                                             (line    6)
* Local storage pool:                    System Pool_Local s-pooloc ads.
                                                             (line    6)
* Lock_Free <1>:                         Aspect Lock_Free.   (line    6)
* Lock_Free:                             Attribute Lock_Free.
                                                             (line    6)
* Locking:                               GNAT Task_Lock g-tasloc ads.
                                                             (line    6)
* Locking Policies:                      RM C 7 2 30 The Package Task_Attributes.
                                                             (line   18)
* Locking using files:                   GNAT Lock_Files g-locfil ads.
                                                             (line    6)
* Loop_Entry:                            Attribute Loop_Entry.
                                                             (line    6)
* Machine Code insertions:               Machine Code Insertions.
                                                             (line    6)
* Machine operations:                    RM B 5 22-26 Interfacing with Fortran.
                                                             (line   35)
* Machine_Size:                          Attribute Machine_Size.
                                                             (line    6)
* Mailboxes:                             GNAT Bounded_Mailboxes g-boumai ads.
                                                             (line    6)
* Mantissa:                              Attribute Mantissa. (line    6)
* Maps <1>:                              GNAT Spitbol Table_Integer g-sptain ads.
                                                             (line    6)
* Maps:                                  GNAT Spitbol Table_VString g-sptavs ads.
                                                             (line    6)
* Max_Asynchronous_Select_Nesting:       Max_Asynchronous_Select_Nesting.
                                                             (line    6)
* Max_Entry_Queue_Depth:                 Max_Entry_Queue_Length.
                                                             (line   13)
* Max_Entry_Queue_Length:                Max_Entry_Queue_Length.
                                                             (line    6)
* Max_Protected_Entries:                 Max_Protected_Entries.
                                                             (line    6)
* Max_Select_Alternatives:               Max_Select_Alternatives.
                                                             (line    6)
* Max_Storage_At_Blocking:               Max_Storage_At_Blocking.
                                                             (line    6)
* Max_Task_Entries:                      Max_Task_Entries.   (line    6)
* Max_Tasks:                             Max_Tasks.          (line    6)
* maximum:                               Attribute Maximum_Alignment.
                                                             (line    6)
* Maximum_Alignment:                     Attribute Maximum_Alignment.
                                                             (line    6)
* Maximum_Alignment attribute:           Alignment Clauses.  (line   19)
* Mechanism_Code:                        Attribute Mechanism_Code.
                                                             (line    6)
* Memory allocation:                     System Memory s-memory ads.
                                                             (line    6)
* Memory corruption debugging:           GNAT Debug_Pools g-debpoo ads.
                                                             (line    6)
* Memory-mapped I/O:                     Use of Address Clauses for Memory-Mapped I/O.
                                                             (line    6)
* Message Digest MD5:                    GNAT MD5 g-md5 ads. (line    6)
* monotonic:                             RM D 7 21 Tasking Restrictions.
                                                             (line   14)
* multidimensional:                      RM 3 5 7 17 Float Types.
                                                             (line   24)
* Multidimensional arrays:               RM 3 5 7 17 Float Types.
                                                             (line   24)
* Multiprocessor interface <1>:          System Multiprocessors s-multip ads.
                                                             (line    6)
* Multiprocessor interface:              System Multiprocessors Dispatching_Domains s-mudido ads.
                                                             (line    6)
* Named assertions <1>:                  Pragma Check_Policy.
                                                             (line    6)
* Named assertions:                      Pragma Check.       (line    6)
* Named numbers:                         Attribute Universal_Literal_String.
                                                             (line    6)
* No_Abort_Statements:                   No_Abort_Statements.
                                                             (line    6)
* No_Access_Parameter_Allocators:        No_Access_Parameter_Allocators.
                                                             (line    6)
* No_Access_Subprograms:                 No_Access_Subprograms.
                                                             (line    6)
* No_Allocators:                         No_Allocators.      (line    6)
* No_Anonymous_Allocators:               No_Anonymous_Allocators.
                                                             (line    6)
* No_Calendar:                           No_Calendar.        (line    6)
* No_Coextensions:                       No_Coextensions.    (line    6)
* No_Default_Initialization:             No_Default_Initialization.
                                                             (line    6)
* No_Delay:                              No_Delay.           (line    6)
* No_Dependence:                         No_Dependence.      (line    6)
* No_Direct_Boolean_Operators:           No_Direct_Boolean_Operators.
                                                             (line    6)
* No_Dispatch:                           No_Dispatch.        (line    6)
* No_Dispatching_Calls:                  No_Dispatching_Calls.
                                                             (line    6)
* No_Dynamic_Attachment:                 No_Dynamic_Attachment.
                                                             (line    6)
* No_Dynamic_Interrupts:                 No_Dynamic_Attachment.
                                                             (line   11)
* No_Dynamic_Priorities:                 No_Dynamic_Priorities.
                                                             (line    6)
* No_Elaboration_Code:                   No_Elaboration_Code.
                                                             (line    6)
* No_Elaboration_Code_All:               Aspect No_Elaboration_Code_All.
                                                             (line    6)
* No_Entry_Calls_In_Elaboration_Code:    No_Entry_Calls_In_Elaboration_Code.
                                                             (line    6)
* No_Entry_Queue:                        No_Entry_Queue.     (line    6)
* No_Enumeration_Maps:                   No_Enumeration_Maps.
                                                             (line    6)
* No_Exception_Handlers:                 No_Exception_Handlers.
                                                             (line    6)
* No_Exception_Propagation:              No_Exception_Propagation.
                                                             (line    6)
* No_Exception_Registration:             No_Exception_Registration.
                                                             (line    6)
* No_Exceptions:                         No_Exceptions.      (line    6)
* No_Finalization:                       No_Finalization.    (line    6)
* No_Fixed_Point:                        No_Fixed_Point.     (line    6)
* No_Floating_Point:                     No_Floating_Point.  (line    6)
* No_Implementation_Aspect_Specifications: No_Implementation_Aspect_Specifications.
                                                             (line    6)
* No_Implementation_Attributes:          No_Implementation_Attributes.
                                                             (line    6)
* No_Implementation_Identifiers:         No_Implementation_Identifiers.
                                                             (line    6)
* No_Implementation_Pragmas:             No_Implementation_Pragmas.
                                                             (line    6)
* No_Implementation_Restrictions:        No_Implementation_Restrictions.
                                                             (line    6)
* No_Implementation_Units:               No_Implementation_Units.
                                                             (line    6)
* No_Implicit_Aliasing:                  No_Implicit_Aliasing.
                                                             (line    6)
* No_Implicit_Conditionals:              No_Implicit_Conditionals.
                                                             (line    6)
* No_Implicit_Dynamic_Code:              No_Implicit_Dynamic_Code.
                                                             (line    6)
* No_Implicit_Heap_Allocations:          No_Implicit_Heap_Allocations.
                                                             (line    6)
* No_Implicit_Loops:                     No_Implicit_Loops.  (line    6)
* No_Initialize_Scalars:                 No_Initialize_Scalars.
                                                             (line    6)
* No_IO:                                 No_IO.              (line    6)
* No_Local_Allocators:                   No_Local_Allocators.
                                                             (line    6)
* No_Local_Protected_Objects:            No_Local_Protected_Objects.
                                                             (line    6)
* No_Local_Timing_Events:                No_Local_Timing_Events.
                                                             (line    6)
* No_Long_Long_Integers:                 No_Long_Long_Integers.
                                                             (line    6)
* No_Multiple_Elaboration:               No_Multiple_Elaboration.
                                                             (line    6)
* No_Nested_Finalization:                No_Nested_Finalization.
                                                             (line    6)
* No_Obsolescent_Features:               No_Obsolescent_Features.
                                                             (line    6)
* No_Protected_Type_Allocators:          No_Protected_Type_Allocators.
                                                             (line    6)
* No_Protected_Types:                    No_Protected_Types. (line    6)
* No_Recursion:                          No_Recursion.       (line    6)
* No_Reentrancy:                         No_Reentrancy.      (line    6)
* No_Relative_Delay:                     No_Relative_Delay.  (line    6)
* No_Requeue:                            No_Requeue_Statements.
                                                             (line   10)
* No_Requeue_Statements:                 No_Requeue_Statements.
                                                             (line    6)
* No_Secondary_Stack:                    No_Secondary_Stack. (line    6)
* No_Select_Statements:                  No_Select_Statements.
                                                             (line    6)
* No_Specific_Termination_Handlers:      No_Specific_Termination_Handlers.
                                                             (line    6)
* No_Specification_of_Aspect:            No_Specification_of_Aspect.
                                                             (line    6)
* No_Standard_Allocators_After_Elaboration: No_Standard_Allocators_After_Elaboration.
                                                             (line    6)
* No_Standard_Storage_Pools:             No_Standard_Storage_Pools.
                                                             (line    6)
* No_Stream_Optimizations:               No_Stream_Optimizations.
                                                             (line    6)
* No_Streams:                            No_Streams.         (line    6)
* No_Tagged_Streams:                     Aspect No_Tagged_Streams.
                                                             (line    6)
* No_Task_Allocators:                    No_Task_Allocators. (line    6)
* No_Task_Attributes:                    No_Task_Attributes_Package.
                                                             (line    9)
* No_Task_Attributes_Package:            No_Task_Attributes_Package.
                                                             (line    6)
* No_Task_Hierarchy:                     No_Task_Hierarchy.  (line    6)
* No_Task_Termination:                   No_Task_Termination.
                                                             (line    6)
* No_Tasking:                            No_Tasking.         (line    6)
* No_Terminate_Alternatives:             No_Terminate_Alternatives.
                                                             (line    6)
* No_Unchecked_Access:                   No_Unchecked_Access.
                                                             (line    6)
* No_Use_Of_Entity:                      No_Use_Of_Entity.   (line    6)
* No_Wide_Characters:                    No_Wide_Characters. (line    6)
* Null_Occurrence <1>:                   Ada Exceptions Is_Null_Occurrence a-einuoc ads.
                                                             (line    6)
* Null_Occurrence:                       Ada Exceptions Last_Chance_Handler a-elchha ads.
                                                             (line    6)
* Null_Parameter:                        Attribute Null_Parameter.
                                                             (line    6)
* Numerics:                              RM F 1 2 Decimal Radix Support.
                                                             (line   12)
* Object_Size <1>:                       Attribute Object_Size.
                                                             (line    6)
* Object_Size <2>:                       Value_Size and Object_Size Clauses.
                                                             (line    6)
* Object_Size:                           Aspect Object_Size. (line    6)
* Obsolsecent:                           Aspect Obsolescent. (line    6)
* obtaining most recent:                 GNAT Most_Recent_Exception g-moreex ads.
                                                             (line    6)
* of an address:                         System Address_Image s-addima ads.
                                                             (line    6)
* of bits:                               Bit_Order Clauses.  (line    6)
* of bytes:                              Effect of Bit_Order on Byte Ordering.
                                                             (line    6)
* of compiler:                           GNAT Compiler_Version g-comver ads.
                                                             (line    6)
* of objects:                            Value_Size and Object_Size Clauses.
                                                             (line    6)
* Old:                                   Attribute Old.      (line    6)
* on `Address`:                          RM 13 7 37 Address as Private.
                                                             (line   10)
* Operating System interface:            GNAT OS_Lib g-os_lib ads.
                                                             (line    6)
* Operations:                            RM 13 7 37 Address as Private.
                                                             (line   10)
* operations of:                         RM 13 7 37 Address as Private.
                                                             (line   10)
* ordering <1>:                          Effect of Bit_Order on Byte Ordering.
                                                             (line    6)
* ordering:                              Bit_Order Clauses.  (line    6)
* Overlaying of objects:                 Address Clauses.    (line  161)
* Package `Interrupts`:                  RM C 3 1 20-21 Protected Procedure Handlers.
                                                             (line   17)
* Package Interfaces:                    RM B 1 39-41 Pragma Export.
                                                             (line   35)
* Package Task_Attributes:               RM C 5 8 Pragma Discard_Names.
                                                             (line   12)
* Packed Decimal:                        Interfaces Packed_Decimal i-pacdec ads.
                                                             (line    6)
* Packed types:                          RM 13 1 21-24 Representation Clauses.
                                                             (line   39)
* Parameters <1>:                        Attribute Mechanism_Code.
                                                             (line    6)
* Parameters <2>:                        Attribute Pool_Address.
                                                             (line    6)
* Parameters:                            Attribute Passed_By_Reference.
                                                             (line    6)
* Parsing <1>:                           GNAT AWK g-awk ads. (line    6)
* Parsing <2>:                           GNAT Bounded_Mailboxes g-boumai ads.
                                                             (line    6)
* Parsing:                               GNAT Bounded_Buffers g-boubuf ads.
                                                             (line    6)
* Part_Of:                               Aspect Part_Of.     (line    6)
* Partition communication subsystem:     RM D 8 47-49 Monotonic Time.
                                                             (line   23)
* Partition interfacing functions:       System Partition_Interface s-parint ads.
                                                             (line    6)
* Passed_By_Reference:                   Attribute Passed_By_Reference.
                                                             (line    6)
* passing:                               Attribute Null_Parameter.
                                                             (line    6)
* Passing by copy:                       Pragma C_Pass_By_Copy.
                                                             (line    6)
* passing mechanism:                     Attribute Mechanism_Code.
                                                             (line    6)
* Pattern matching <1>:                  GNAT Regexp g-regexp ads.
                                                             (line    6)
* Pattern matching <2>:                  GNAT Spitbol Patterns g-spipat ads.
                                                             (line    6)
* Pattern matching:                      GNAT Regpat g-regpat ads.
                                                             (line    6)
* PCS:                                   RM D 8 47-49 Monotonic Time.
                                                             (line   23)
* Persistent_BSS:                        Aspect Persistent_BSS.
                                                             (line    6)
* Pool_Address:                          Attribute Pool_Address.
                                                             (line    6)
* Portability:                           About This Guide.   (line   26)
* Post <1>:                              Pragma Post_Class.  (line    6)
* Post:                                  Pragma Post.        (line    6)
* Postcondition:                         Pragma Postcondition.
                                                             (line    6)
* postconditions <1>:                    Pragma Post_Class.  (line    6)
* postconditions <2>:                    Pragma Postcondition.
                                                             (line    6)
* postconditions:                        Pragma Post.        (line    6)
* Pragma:                                Representation Clauses and Pragmas.
                                                             (line    6)
* pragma Ada_2012:                       Implementation of Ada 2012 Features.
                                                             (line    6)
* Pragma Component_Alignment:            Pragma Component_Alignment.
                                                             (line    6)
* Pragma Pack (for arrays):              Pragma Pack for Arrays.
                                                             (line    6)
* Pragma Pack (for records):             Pragma Pack for Records.
                                                             (line    6)
* Pragma Pack (for type Natural):        Pragma Pack for Arrays.
                                                             (line   73)
* Pragma Pack warning:                   Pragma Pack for Arrays.
                                                             (line   73)
* Pragmas:                               RM 1 1 5 12 Bounded Errors.
                                                             (line   13)
* Pre:                                   Pragma Pre.         (line    6)
* Pre-elaboration requirements:          RM C 3 2 25 Package Interrupts.
                                                             (line   15)
* Pre_Class:                             Pragma Pre_Class.   (line    6)
* preconditions <1>:                     Pragma Pre.         (line    6)
* preconditions <2>:                     Pragma Pre_Class.   (line    6)
* preconditions:                         Pragma Precondition.
                                                             (line    6)
* Preconditions:                         Pragma Precondition.
                                                             (line    6)
* Predicate:                             Aspect Predicate.   (line    6)
* Preemptive abort:                      RM D 4 16 Entry Queuing Policies.
                                                             (line   11)
* Prefix_Exception_Messages:             Pragma Prefix_Exception_Messages.
                                                             (line    6)
* Protected procedure handlers:          RM C 3 28 Interrupt Support.
                                                             (line   15)
* Pure:                                  GNAT Exceptions g-expect ads.
                                                             (line    6)
* Pure packages:                         GNAT Exceptions g-expect ads.
                                                             (line    6)
* Pure_Function:                         Aspect Pure_Function.
                                                             (line    6)
* Random number generation <1>:          GNAT Random_Numbers g-rannum ads.
                                                             (line    6)
* Random number generation <2>:          GNAT MBBS_Float_Random g-mbflra ads.
                                                             (line    6)
* Random number generation <3>:          RM A 4 4 106 Bounded-Length String Handling.
                                                             (line   11)
* Random number generation:              GNAT MBBS_Discrete_Random g-mbdira ads.
                                                             (line    6)
* Range_Length:                          Attribute Range_Length.
                                                             (line    6)
* Rational compatibility:                Pragma Overriding_Renamings.
                                                             (line    6)
* Rational profile:                      Pragma Overriding_Renamings.
                                                             (line    6)
* Rational Profile:                      Pragma Implicit_Packing.
                                                             (line    6)
* Rational profile:                      Pragma Use_VADS_Size.
                                                             (line    6)
* Read attribute:                        RM 13 13 2 17 Stream Oriented Attributes.
                                                             (line   20)
* Real-Time Systems Annex compliance:    Ensuring Compliance with the Real-Time Annex.
                                                             (line    6)
* Record Representation Clause:          Record Representation Clauses.
                                                             (line    6)
* Record representation clauses:         RM 13 4 9-10 Enumeration Representation Clauses.
                                                             (line   15)
* records:                               RM 13 4 9-10 Enumeration Representation Clauses.
                                                             (line   15)
* Ref:                                   Attribute Ref.      (line    6)
* Refined_Depends:                       Aspect Refined_Depends.
                                                             (line    6)
* Refined_Global:                        Aspect Refined_Global.
                                                             (line    6)
* Refined_Post:                          Aspect Refined_Post.
                                                             (line    6)
* Refined_State:                         Aspect Refined_State.
                                                             (line    6)
* Regular expressions <1>:               GNAT Regexp g-regexp ads.
                                                             (line    6)
* Regular expressions:                   GNAT Regpat g-regpat ads.
                                                             (line    6)
* Remote_Access_Type:                    Aspect Remote_Access_Type.
                                                             (line    6)
* Removing command line arguments:       Ada Command_Line Remove a-colire ads.
                                                             (line    6)
* representation:                        Representation Clauses and Pragmas.
                                                             (line    6)
* Representation <1>:                    Determining the Representations chosen by GNAT.
                                                             (line    6)
* Representation:                        System Wch_Cnv s-wchcnv ads.
                                                             (line    6)
* Representation Clause:                 Representation Clauses and Pragmas.
                                                             (line    6)
* Representation clauses:                RM 13 4 9-10 Enumeration Representation Clauses.
                                                             (line   15)
* Representation Clauses:                Representation Clauses and Pragmas.
                                                             (line    6)
* Representation clauses <1>:            RM 11 5 28 Suppression of Checks.
                                                             (line   11)
* Representation clauses:                RM 13 3 71-73 Component Size Clauses.
                                                             (line   24)
* representation of:                     Attribute Universal_Literal_String.
                                                             (line    6)
* Representation of enums <1>:           Attribute Enum_Rep. (line    6)
* Representation of enums:               Attribute Enum_Val. (line    6)
* Representation of wide characters:     System Wch_Cnv s-wchcnv ads.
                                                             (line    6)
* Representation Pragma:                 Representation Clauses and Pragmas.
                                                             (line    6)
* response file:                         Ada Command_Line Response_File a-clrefi ads.
                                                             (line    6)
* Response file for command line:        Ada Command_Line Response_File a-clrefi ads.
                                                             (line    6)
* Restriction_Set:                       Attribute Restriction_Set.
                                                             (line    6)
* Restrictions:                          Attribute Restriction_Set.
                                                             (line    6)
* Restrictions definitions:              System Rident s-rident ads.
                                                             (line    6)
* Result:                                Attribute Result.   (line    6)
* Return values:                         Attribute Mechanism_Code.
                                                             (line    6)
* Rewrite data:                          GNAT Rewrite_Data g-rewdat ads.
                                                             (line    6)
* Rotate_Left:                           Shifts and Rotates. (line    6)
* Rotate_Right:                          Shifts and Rotates. (line    6)
* Run-time restrictions access:          System Restrictions s-restri ads.
                                                             (line    6)
* Safe_Emax:                             Attribute Safe_Emax.
                                                             (line    6)
* Safe_Large:                            Attribute Safe_Large.
                                                             (line    6)
* Safe_Small:                            Attribute Safe_Small.
                                                             (line    6)
* Scalar storage order:                  Attribute Scalar_Storage_Order.
                                                             (line    6)
* Scalar_Storage_Order <1>:              Attribute Scalar_Storage_Order.
                                                             (line    6)
* Scalar_Storage_Order <2>:              Aspect Scalar_Storage_Order.
                                                             (line    6)
* Scalar_Storage_Order:                  Pragma Default_Scalar_Storage_Order.
                                                             (line    6)
* Secondary Stack Info:                  GNAT Secondary_Stack_Info g-sestin ads.
                                                             (line    6)
* Secure Hash Algorithm SHA-1:           GNAT SHA1 g-sha1 ads.
                                                             (line    6)
* Secure Hash Algorithm SHA-224:         GNAT SHA224 g-sha224 ads.
                                                             (line    6)
* Secure Hash Algorithm SHA-256:         GNAT SHA256 g-sha256 ads.
                                                             (line    6)
* Secure Hash Algorithm SHA-384:         GNAT SHA384 g-sha384 ads.
                                                             (line    6)
* Secure Hash Algorithm SHA-512:         GNAT SHA512 g-sha512 ads.
                                                             (line    6)
* Semaphores:                            GNAT Semaphores g-semaph ads.
                                                             (line    6)
* Sequential elaboration policy:         RM G 2 6 15 Complex Arithmetic Accuracy.
                                                             (line   14)
* Serial_Communications:                 GNAT Serial_Communications g-sercom ads.
                                                             (line    6)
* Sets of strings:                       GNAT Spitbol Table_Boolean g-sptabo ads.
                                                             (line    6)
* setting for not-first subtype:         Attribute Value_Size.
                                                             (line    6)
* Shared:                                Aspect Shared.      (line    6)
* Shared passive packages:               GNAT Implementation of Shared Passive Packages.
                                                             (line    6)
* SHARED_MEMORY_DIRECTORY environment variable: GNAT Implementation of Shared Passive Packages.
                                                             (line   36)
* Shift operators:                       Pragma Provide_Shift_Operators.
                                                             (line    6)
* Shift_Left:                            Shifts and Rotates. (line    6)
* Shift_Right:                           Shifts and Rotates. (line    6)
* Shift_Right_Arithmetic:                Shifts and Rotates. (line    6)
* Signals:                               GNAT Signals g-signal ads.
                                                             (line    6)
* simple <1>:                            Pragma Simple_Storage_Pool_Type.
                                                             (line    6)
* simple:                                Attribute Simple_Storage_Pool.
                                                             (line    6)
* Simple I/O:                            GNAT IO g-io ads.   (line    6)
* Simple storage pool <1>:               Pragma Simple_Storage_Pool_Type.
                                                             (line    6)
* Simple storage pool:                   Attribute Simple_Storage_Pool.
                                                             (line    6)
* Simple_Barriers:                       Simple_Barriers.    (line    6)
* Simple_Storage_Pool <1>:               Attribute Simple_Storage_Pool.
                                                             (line    6)
* Simple_Storage_Pool:                   Aspect Simple_Storage_Pool.
                                                             (line    6)
* Simple_Storage_Pool_Type:              Aspect Simple_Storage_Pool_Type.
                                                             (line    6)
* Size <1>:                              Value_Size and Object_Size Clauses.
                                                             (line    6)
* Size <2>:                              Attribute VADS_Size.
                                                             (line    6)
* Size <3>:                              Pragma Use_VADS_Size.
                                                             (line    6)
* Size <4>:                              Attribute Value_Size.
                                                             (line    6)
* Size <5>:                              Attribute Object_Size.
                                                             (line    6)
* Size:                                  Size of Variant Record Objects.
                                                             (line    6)
* size:                                  Size of Variant Record Objects.
                                                             (line    6)
* Size Clause:                           Size Clauses.       (line    6)
* Size clauses:                          RM 13 3 29-35 Alignment Clauses.
                                                             (line   41)
* Size for biased representation:        Biased Representation.
                                                             (line    6)
* Size of `Address`:                     Attribute Address_Size.
                                                             (line    6)
* Small:                                 Attribute Small.    (line    6)
* Sockets:                               GNAT Sockets g-socket ads.
                                                             (line    6)
* Sorting <1>:                           GNAT Bubble_Sort g-bubsor ads.
                                                             (line    6)
* Sorting <2>:                           GNAT Heap_Sort g-heasor ads.
                                                             (line    6)
* Sorting <3>:                           GNAT Heap_Sort_G g-hesorg ads.
                                                             (line    6)
* Sorting <4>:                           GNAT Heap_Sort_A g-hesora ads.
                                                             (line    6)
* Sorting <5>:                           GNAT Bubble_Sort_A g-busora ads.
                                                             (line    6)
* Sorting:                               GNAT Bubble_Sort_G g-busorg ads.
                                                             (line    6)
* Source Information:                    GNAT Source_Info g-souinf ads.
                                                             (line    6)
* Source_Location:                       Source_Location.    (line    6)
* SPARK:                                 SPARK_05.           (line   13)
* SPARK_05:                              SPARK_05.           (line    6)
* SPARK_Mode:                            Aspect SPARK_Mode.  (line    6)
* Spawn capability:                      GNAT OS_Lib g-os_lib ads.
                                                             (line    6)
* Spell checking <1>:                    GNAT Spelling_Checker_Generic g-spchge ads.
                                                             (line    6)
* Spell checking <2>:                    GNAT Wide_Spelling_Checker g-wispch ads.
                                                             (line    6)
* Spell checking <3>:                    GNAT Wide_Wide_Spelling_Checker g-zspche ads.
                                                             (line    6)
* Spell checking <4>:                    GNAT Spelling_Checker g-speche ads.
                                                             (line    6)
* Spell checking:                        GNAT Wide_Spelling_Checker g-u3spch ads.
                                                             (line    6)
* SPITBOL interface:                     GNAT Spitbol g-spitbo ads.
                                                             (line    6)
* SPITBOL pattern matching:              GNAT Spitbol Patterns g-spipat ads.
                                                             (line    6)
* SPITBOL Tables <1>:                    GNAT Spitbol Table_VString g-sptavs ads.
                                                             (line    6)
* SPITBOL Tables <2>:                    GNAT Spitbol Table_Boolean g-sptabo ads.
                                                             (line    6)
* SPITBOL Tables:                        GNAT Spitbol Table_Integer g-sptain ads.
                                                             (line    6)
* Static_Priorities:                     Static_Priorities.  (line    6)
* Static_Storage_Size:                   Static_Storage_Size.
                                                             (line    6)
* Storage place attributes:              RM 13 5 1 17-22 Record Representation Clauses.
                                                             (line   45)
* Storage pool <1>:                      Pragma Simple_Storage_Pool_Type.
                                                             (line    6)
* Storage pool <2>:                      Attribute Simple_Storage_Pool.
                                                             (line    6)
* Storage pool <3>:                      System Pool_Local s-pooloc ads.
                                                             (line    6)
* Storage pool:                          System Pool_Global s-pooglo ads.
                                                             (line    6)
* Storage_Size Clause:                   Storage_Size Clauses.
                                                             (line    6)
* Storage_Unit:                          Attribute Storage_Unit.
                                                             (line    6)
* Storage_Unit (in pragma Component_Alignment): Pragma Component_Alignment.
                                                             (line   36)
* Stream files:                          Treating Text_IO Files as Streams.
                                                             (line    6)
* Stream operations:                     System Strings Stream_Ops s-ststop ads.
                                                             (line    6)
* Stream oriented attributes <1>:        RM 13 13 2 17 Stream Oriented Attributes.
                                                             (line   20)
* Stream oriented attributes:            RM 13 11 2 17 Unchecked Deallocation.
                                                             (line   11)
* String decoding:                       GNAT Decode_String g-decstr ads.
                                                             (line    6)
* String encoding:                       GNAT Encode_String g-encstr ads.
                                                             (line    6)
* String maps:                           GNAT Spitbol Table_VString g-sptavs ads.
                                                             (line    6)
* String splitter:                       GNAT String_Split g-strspl ads.
                                                             (line    6)
* String stream operations:              System Strings Stream_Ops s-ststop ads.
                                                             (line    6)
* Stub_Type:                             Attribute Stub_Type.
                                                             (line    6)
* Subprogram address:                    Attribute Code_Address.
                                                             (line    6)
* subtypes:                              Alignment Clauses.  (line   85)
* Suppress_Debug_Info:                   Aspect Suppress_Debug_Info.
                                                             (line    6)
* Suppress_Initialization:               Aspect Suppress_Initialization.
                                                             (line    6)
* Suppressing external name <1>:         Pragma Export_Valued_Procedure.
                                                             (line   49)
* Suppressing external name <2>:         Pragma Export_Function.
                                                             (line   61)
* Suppressing external name:             Pragma Export_Procedure.
                                                             (line   44)
* Suppressing initialization:            Pragma Suppress_Initialization.
                                                             (line    6)
* suppression of <1>:                    RM 11 4 1 19 Exception Information.
                                                             (line   23)
* suppression of:                        Pragma Suppress_Initialization.
                                                             (line    6)
* Suppression of checks:                 RM 11 4 1 19 Exception Information.
                                                             (line   23)
* synonyms:                              Pragma Convention_Identifier.
                                                             (line    6)
* System:                                Pragma Extend_System.
                                                             (line    6)
* System.Address_Image (s-addima.ads):   System Address_Image s-addima ads.
                                                             (line    6)
* System.Assertions (s-assert.ads):      System Assertions s-assert ads.
                                                             (line    6)
* System.Atomic_Counters (s-atocou.ads): System Atomic_Counters s-atocou ads.
                                                             (line    6)
* System.Memory (s-memory.ads):          System Memory s-memory ads.
                                                             (line    6)
* System.Multiprocessors (s-multip.ads): System Multiprocessors s-multip ads.
                                                             (line    6)
* System.Multiprocessors.Dispatching_Domains (s-mudido.ads): System Multiprocessors Dispatching_Domains s-mudido ads.
                                                             (line    6)
* System.Partition_Interface (s-parint.ads): System Partition_Interface s-parint ads.
                                                             (line    6)
* System.Pool_Global (s-pooglo.ads):     System Pool_Global s-pooglo ads.
                                                             (line    6)
* System.Pool_Local (s-pooloc.ads):      System Pool_Local s-pooloc ads.
                                                             (line    6)
* System.Restrictions (s-restri.ads):    System Restrictions s-restri ads.
                                                             (line    6)
* System.Rident (s-rident.ads):          System Rident s-rident ads.
                                                             (line    6)
* System.Strings.Stream_Ops (s-ststop.ads): System Strings Stream_Ops s-ststop ads.
                                                             (line    6)
* System.Unsigned_Types (s-unstyp.ads):  System Unsigned_Types s-unstyp ads.
                                                             (line    6)
* System.Wch_Cnv (s-wchcnv.ads):         System Wch_Cnv s-wchcnv ads.
                                                             (line    6)
* System.Wch_Con (s-wchcon.ads):         System Wch_Con s-wchcon ads.
                                                             (line    6)
* System_Allocator_Alignment:            Attribute System_Allocator_Alignment.
                                                             (line    6)
* Table implementation <1>:              GNAT Dynamic_Tables g-dyntab ads.
                                                             (line    6)
* Table implementation:                  GNAT Table g-table ads.
                                                             (line    6)
* Target_Name:                           Attribute Target_Name.
                                                             (line    6)
* Task locking:                          GNAT Task_Lock g-tasloc ads.
                                                             (line    6)
* Task specific storage:                 Pragma Thread_Local_Storage.
                                                             (line    6)
* Task synchronization:                  GNAT Task_Lock g-tasloc ads.
                                                             (line    6)
* Task_Attributes <1>:                   Pragma Thread_Local_Storage.
                                                             (line    6)
* Task_Attributes:                       RM C 5 8 Pragma Discard_Names.
                                                             (line   12)
* Tasking restrictions:                  RM D 6 9-10 Preemptive Abort.
                                                             (line   19)
* Test cases:                            Pragma Test_Case.   (line    6)
* Test_Case:                             Aspect Test_Case.   (line    6)
* testing for <1>:                       Attribute Has_Access_Values.
                                                             (line    6)
* testing for <2>:                       Attribute Has_Discriminants.
                                                             (line    6)
* testing for <3>:                       Ada Exceptions Is_Null_Occurrence a-einuoc ads.
                                                             (line    6)
* testing for:                           Ada Exceptions Last_Chance_Handler a-elchha ads.
                                                             (line    6)
* Text_IO <1>:                           Ada Strings Unbounded Text_IO a-suteio ads.
                                                             (line    6)
* Text_IO <2>:                           Ada Strings Wide_Wide_Unbounded Wide_Wide_Text_IO a-szuzti ads.
                                                             (line    6)
* Text_IO <3>:                           GNAT IO_Aux g-io_aux ads.
                                                             (line    6)
* Text_IO:                               Ada Strings Wide_Unbounded Wide_Text_IO a-swuwti ads.
                                                             (line    6)
* Text_IO extensions:                    Text_IO Extensions. (line    6)
* Text_IO for unbounded strings:         Text_IO Facilities for Unbounded Strings.
                                                             (line    6)
* Text_IO operations:                    Text_IO Facilities for Unbounded Strings.
                                                             (line    6)
* Text_IO resetting standard files:      Ada Text_IO Reset_Standard_Files a-tirsfi ads.
                                                             (line    6)
* Thread_Local_Storage:                  Aspect Thread_Local_Storage.
                                                             (line    6)
* Threads:                               GNAT Threads g-thread ads.
                                                             (line    6)
* Time <1>:                              GNAT Calendar Time_IO g-catiio ads.
                                                             (line    6)
* Time:                                  RM D 7 21 Tasking Restrictions.
                                                             (line   14)
* Time stamp:                            GNAT Time_Stamp g-timsta ads.
                                                             (line    6)
* TLS (Thread Local Storage):            Pragma Thread_Local_Storage.
                                                             (line    6)
* To_Address <1>:                        Attribute To_Address.
                                                             (line    6)
* To_Address:                            Address Clauses.    (line   74)
* To_Any:                                Attribute To_Any.   (line    6)
* Trace back facilities <1>:             GNAT Traceback g-traceb ads.
                                                             (line    6)
* Trace back facilities:                 GNAT Traceback Symbolic g-trasym ads.
                                                             (line    6)
* Traceback for Exception Occurrence:    Ada Exceptions Traceback a-exctra ads.
                                                             (line    6)
* trampoline:                            No_Implicit_Dynamic_Code.
                                                             (line    6)
* Type_Class:                            Attribute Type_Class.
                                                             (line    6)
* Type_Key:                              Attribute Type_Key. (line    6)
* TypeCode:                              Attribute TypeCode. (line    6)
* typographical:                         Conventions.        (line    6)
* Typographical conventions:             Conventions.        (line    6)
* UET_Address:                           Attribute UET_Address.
                                                             (line    6)
* Unbounded_String <1>:                  Ada Strings Unbounded Text_IO a-suteio ads.
                                                             (line    6)
* Unbounded_String:                      Text_IO Facilities for Unbounded Strings.
                                                             (line    6)
* Unbounded_Wide_String:                 Ada Strings Wide_Unbounded Wide_Text_IO a-swuwti ads.
                                                             (line    6)
* Unbounded_Wide_Wide_String:            Ada Strings Wide_Wide_Unbounded Wide_Wide_Text_IO a-szuzti ads.
                                                             (line    6)
* Unchecked conversion:                  RM 13 7 1 16 Address Operations.
                                                             (line   15)
* Unchecked deallocation:                RM 13 11 23-25 Implicit Heap Usage.
                                                             (line   33)
* Unconstrained_Array:                   Attribute Unconstrained_Array.
                                                             (line    6)
* Unevaluated_Use_Of_Old:                Pragma Unevaluated_Use_Of_Old.
                                                             (line    6)
* Unicode <1>:                           GNAT Encode_UTF8_String g-enutst ads.
                                                             (line    6)
* Unicode <2>:                           GNAT Encode_String g-encstr ads.
                                                             (line    6)
* Unicode <3>:                           GNAT Decode_UTF8_String g-deutst ads.
                                                             (line    6)
* Unicode:                               GNAT Decode_String g-decstr ads.
                                                             (line    6)
* Unicode categorization <1>:            Ada Wide_Wide_Characters Unicode a-zchuni ads.
                                                             (line    6)
* Unicode categorization:                Ada Wide_Characters Unicode a-wichun ads.
                                                             (line    6)
* Unions in C:                           Pragma Unchecked_Union.
                                                             (line    6)
* Universal_Aliasing:                    Aspect Universal_Aliasing.
                                                             (line    6)
* Universal_Data:                        Aspect Universal_Data.
                                                             (line    6)
* Universal_Literal_String:              Attribute Universal_Literal_String.
                                                             (line    6)
* unmodified:                            Pragma Unmodified.  (line    6)
* Unmodified:                            Aspect Unmodified.  (line    6)
* unreferenced:                          Pragma Unreferenced.
                                                             (line    6)
* Unreferenced:                          Aspect Unreferenced.
                                                             (line    6)
* unreferenced:                          Pragma Unreferenced_Objects.
                                                             (line    6)
* Unreferenced_Objects:                  Aspect Unreferenced_Objects.
                                                             (line    6)
* unrestricted:                          Attribute Unrestricted_Access.
                                                             (line    6)
* Unrestricted_Access:                   Attribute Unrestricted_Access.
                                                             (line    6)
* Update:                                Attribute Update.   (line    6)
* used for objects:                      Attribute Object_Size.
                                                             (line    6)
* UTF-8 <1>:                             GNAT Encode_String g-encstr ads.
                                                             (line    6)
* UTF-8 <2>:                             GNAT Encode_UTF8_String g-enutst ads.
                                                             (line    6)
* UTF-8 <3>:                             GNAT Decode_String g-decstr ads.
                                                             (line    6)
* UTF-8:                                 GNAT Decode_UTF8_String g-deutst ads.
                                                             (line    6)
* UTF-8 representation:                  GNAT Byte_Order_Mark g-byorma ads.
                                                             (line    6)
* UTF-8 string decoding:                 GNAT Decode_UTF8_String g-deutst ads.
                                                             (line    6)
* UTF-8 string encoding:                 GNAT Encode_UTF8_String g-enutst ads.
                                                             (line    6)
* VADS compatibility <1>:                Pragma Use_VADS_Size.
                                                             (line    6)
* VADS compatibility:                    Attribute VADS_Size.
                                                             (line    6)
* VADS_Size:                             Attribute VADS_Size.
                                                             (line    6)
* Valid_Scalars:                         Attribute Valid_Scalars.
                                                             (line    6)
* Value_Size <1>:                        Attribute Value_Size.
                                                             (line    6)
* Value_Size <2>:                        Aspect Value_Size.  (line    6)
* Value_Size:                            Value_Size and Object_Size Clauses.
                                                             (line    6)
* variant record objects:                Size of Variant Record Objects.
                                                             (line    6)
* Variant record objects:                Size of Variant Record Objects.
                                                             (line    6)
* Version:                               GNAT Compiler_Version g-comver ads.
                                                             (line    6)
* VxWorks <1>:                           Interfaces VxWorks IO i-vxwoio ads.
                                                             (line    6)
* VxWorks <2>:                           Interfaces VxWorks i-vxwork ads.
                                                             (line    6)
* VxWorks:                               Interfaces VxWorks IO i-vxwoio ads.
                                                             (line    6)
* Warnings <1>:                          Aspect Warnings.    (line    6)
* Warnings <2>:                          Pragma Unmodified.  (line    6)
* Warnings <3>:                          Pragma Unreferenced.
                                                             (line    6)
* Warnings:                              Pragma Unreferenced_Objects.
                                                             (line    6)
* Wchar_T_Size:                          Attribute Wchar_T_Size.
                                                             (line    6)
* when passed by reference <1>:          Attribute Pool_Address.
                                                             (line    6)
* when passed by reference:              Attribute Passed_By_Reference.
                                                             (line    6)
* Wide characte representations:         GNAT Byte_Order_Mark g-byorma ads.
                                                             (line    6)
* Wide Character:                        System Wch_Cnv s-wchcnv ads.
                                                             (line    6)
* Wide character codes:                  GNAT UTF_32 g-table ads.
                                                             (line    6)
* Wide character decoding:               GNAT Decode_UTF8_String g-deutst ads.
                                                             (line    6)
* Wide character encoding <1>:           GNAT Encode_String g-encstr ads.
                                                             (line    6)
* Wide character encoding <2>:           GNAT Decode_String g-decstr ads.
                                                             (line    6)
* Wide character encoding:               GNAT Encode_UTF8_String g-enutst ads.
                                                             (line    6)
* Wide String:                           System Wch_Cnv s-wchcnv ads.
                                                             (line    6)
* Wide_Character:                        Ada Wide_Characters Unicode a-wichun ads.
                                                             (line    6)
* Wide_String splitter:                  GNAT Wide_String_Split g-wistsp ads.
                                                             (line    6)
* Wide_Text_IO resetting standard files: Ada Wide_Text_IO Reset_Standard_Files a-wrstfi ads.
                                                             (line    6)
* Wide_Wide_Character:                   Ada Wide_Wide_Characters Unicode a-zchuni ads.
                                                             (line    6)
* Wide_Wide_String splitter:             GNAT Wide_Wide_String_Split g-zistsp ads.
                                                             (line    6)
* Wide_Wide_Text_IO resetting standard files: Ada Wide_Wide_Text_IO Reset_Standard_Files a-zrstfi ads.
                                                             (line    6)
* Windows Registry:                      GNAT Registry g-regist ads.
                                                             (line    6)
* Word_Size:                             Attribute Word_Size.
                                                             (line    6)
* Write attribute:                       RM 13 13 2 17 Stream Oriented Attributes.
                                                             (line   20)
* XDR representation:                    RM 13 13 2 17 Stream Oriented Attributes.
                                                             (line   20)
* Zero address:                          Attribute Null_Parameter.
                                                             (line    6)



Tag Table:
Node: Top346
Ref: gnat_rm doc577
Ref: 0577
Node: About This Guide31856
Ref: gnat_rm/about_this_guide about-this-guide31964
Ref: 231964
Ref: gnat_rm/about_this_guide doc31964
Ref: 331964
Ref: gnat_rm/about_this_guide gnat-reference-manual31964
Ref: 431964
Ref: gnat_rm/about_this_guide id131964
Ref: 531964
Node: What This Reference Manual Contains33394
Ref: gnat_rm/about_this_guide what-this-reference-manual-contains33503
Ref: 633503
Node: Conventions37072
Ref: gnat_rm/about_this_guide conventions37209
Ref: 1737209
Node: Related Information37743
Ref: gnat_rm/about_this_guide related-information37836
Ref: 1837836
Node: Implementation Defined Pragmas39096
Ref: gnat_rm/implementation_defined_pragmas implementation-defined-pragmas39231
Ref: 739231
Ref: gnat_rm/implementation_defined_pragmas doc39231
Ref: 1939231
Ref: gnat_rm/implementation_defined_pragmas id139231
Ref: 1a39231
Node: Pragma Abort_Defer45163
Ref: gnat_rm/implementation_defined_pragmas pragma-abort-defer45279
Ref: 1b45279
Node: Pragma Abstract_State45650
Ref: gnat_rm/implementation_defined_pragmas pragma-abstract-state45788
Ref: 1c45788
Node: Pragma Ada_8345926
Ref: gnat_rm/implementation_defined_pragmas pragma-ada-8346059
Ref: 1d46059
Node: Pragma Ada_9547145
Ref: gnat_rm/implementation_defined_pragmas pragma-ada-9547270
Ref: 1e47270
Node: Pragma Ada_0547779
Ref: gnat_rm/implementation_defined_pragmas pragma-ada-0547906
Ref: 1f47906
Node: Pragma Ada_200548927
Ref: gnat_rm/implementation_defined_pragmas pragma-ada-200549054
Ref: 2049054
Node: Pragma Ada_1249220
Ref: gnat_rm/implementation_defined_pragmas pragma-ada-1249349
Ref: 2149349
Node: Pragma Ada_201250509
Ref: gnat_rm/implementation_defined_pragmas pragma-ada-201250651
Ref: 2250651
Node: Pragma Allow_Integer_Address50817
Ref: gnat_rm/implementation_defined_pragmas pragma-allow-integer-address50961
Ref: 2350961
Node: Pragma Annotate52525
Ref: gnat_rm/implementation_defined_pragmas pragma-annotate52667
Ref: 2452667
Node: Pragma Assert54057
Ref: gnat_rm/implementation_defined_pragmas pragma-assert54192
Ref: 2554192
Node: Pragma Assert_And_Cut56881
Ref: gnat_rm/implementation_defined_pragmas pragma-assert-and-cut57024
Ref: 2657024
Node: Pragma Assertion_Policy57820
Ref: gnat_rm/implementation_defined_pragmas pragma-assertion-policy57963
Ref: 2757963
Node: Pragma Assume61157
Ref: gnat_rm/implementation_defined_pragmas pragma-assume61310
Ref: 2861310
Node: Pragma Assume_No_Invalid_Values62267
Ref: gnat_rm/implementation_defined_pragmas pragma-assume-no-invalid-values62417
Ref: 2962417
Node: Pragma Async_Readers64176
Ref: gnat_rm/implementation_defined_pragmas pragma-async-readers64333
Ref: 2a64333
Node: Pragma Async_Writers64471
Ref: gnat_rm/implementation_defined_pragmas pragma-async-writers64624
Ref: 2b64624
Node: Pragma Attribute_Definition64762
Ref: gnat_rm/implementation_defined_pragmas pragma-attribute-definition64916
Ref: 2c64916
Node: Pragma C_Pass_By_Copy65529
Ref: gnat_rm/implementation_defined_pragmas pragma-c-pass-by-copy65675
Ref: 2d65675
Node: Pragma Check66831
Ref: gnat_rm/implementation_defined_pragmas pragma-check66977
Ref: 2e66977
Node: Pragma Check_Float_Overflow68184
Ref: gnat_rm/implementation_defined_pragmas pragma-check-float-overflow68326
Ref: 2f68326
Node: Pragma Check_Name70330
Ref: gnat_rm/implementation_defined_pragmas pragma-check-name70479
Ref: 3070479
Node: Pragma Check_Policy71579
Ref: gnat_rm/implementation_defined_pragmas pragma-check-policy71723
Ref: 3171723
Node: Pragma CIL_Constructor74405
Ref: gnat_rm/implementation_defined_pragmas pragma-cil-constructor74546
Ref: 3274546
Node: Pragma Comment74917
Ref: gnat_rm/implementation_defined_pragmas pragma-comment75059
Ref: 3375059
Node: Pragma Common_Object75564
Ref: gnat_rm/implementation_defined_pragmas pragma-common-object75709
Ref: 3475709
Node: Pragma Compile_Time_Error76565
Ref: gnat_rm/implementation_defined_pragmas pragma-compile-time-error76723
Ref: 3576723
Node: Pragma Compile_Time_Warning77791
Ref: gnat_rm/implementation_defined_pragmas pragma-compile-time-warning77949
Ref: 3677949
Node: Pragma Compiler_Unit78741
Ref: gnat_rm/implementation_defined_pragmas pragma-compiler-unit78902
Ref: 3778902
Node: Pragma Compiler_Unit_Warning79191
Ref: gnat_rm/implementation_defined_pragmas pragma-compiler-unit-warning79355
Ref: 3879355
Node: Pragma Complete_Representation79888
Ref: gnat_rm/implementation_defined_pragmas pragma-complete-representation80061
Ref: 3980061
Node: Pragma Complex_Representation80606
Ref: gnat_rm/implementation_defined_pragmas pragma-complex-representation80777
Ref: 3a80777
Node: Pragma Component_Alignment81527
Ref: gnat_rm/implementation_defined_pragmas pragma-component-alignment81689
Ref: 3b81689
Node: Pragma Contract_Cases84344
Ref: gnat_rm/implementation_defined_pragmas pragma-contract-cases84505
Ref: 3c84505
Node: Pragma Convention_Identifier87143
Ref: gnat_rm/implementation_defined_pragmas pragma-convention-identifier87294
Ref: 3d87294
Node: Pragma CPP_Class88437
Ref: gnat_rm/implementation_defined_pragmas pragma-cpp-class88589
Ref: 3e88589
Node: Pragma CPP_Constructor89673
Ref: gnat_rm/implementation_defined_pragmas pragma-cpp-constructor89815
Ref: 4089815
Node: Pragma CPP_Virtual91655
Ref: gnat_rm/implementation_defined_pragmas pragma-cpp-virtual91798
Ref: 4191798
Node: Pragma CPP_Vtable92267
Ref: gnat_rm/implementation_defined_pragmas pragma-cpp-vtable92398
Ref: 4292398
Node: Pragma CPU92821
Ref: gnat_rm/implementation_defined_pragmas pragma-cpu92946
Ref: 4392946
Node: Pragma Debug93185
Ref: gnat_rm/implementation_defined_pragmas pragma-debug93312
Ref: 4493312
Node: Pragma Debug_Policy94245
Ref: gnat_rm/implementation_defined_pragmas pragma-debug-policy94397
Ref: 4594397
Node: Pragma Default_Scalar_Storage_Order94676
Ref: gnat_rm/implementation_defined_pragmas pragma-default-scalar-storage-order94843
Ref: 4694843
Node: Pragma Default_Storage_Pool97035
Ref: gnat_rm/implementation_defined_pragmas pragma-default-storage-pool97197
Ref: 4797197
Node: Pragma Depends97501
Ref: gnat_rm/implementation_defined_pragmas pragma-depends97650
Ref: 4897650
Node: Pragma Detect_Blocking97776
Ref: gnat_rm/implementation_defined_pragmas pragma-detect-blocking97935
Ref: 4997935
Node: Pragma Disable_Atomic_Synchronization98323
Ref: gnat_rm/implementation_defined_pragmas pragma-disable-atomic-synchronization98493
Ref: 4a98493
Node: Pragma Dispatching_Domain99297
Ref: gnat_rm/implementation_defined_pragmas pragma-dispatching-domain99467
Ref: 4b99467
Node: Pragma Effective_Reads99751
Ref: gnat_rm/implementation_defined_pragmas pragma-effective-reads99907
Ref: 4c99907
Node: Pragma Effective_Writes100049
Ref: gnat_rm/implementation_defined_pragmas pragma-effective-writes100205
Ref: 4d100205
Node: Pragma Elaboration_Checks100349
Ref: gnat_rm/implementation_defined_pragmas pragma-elaboration-checks100499
Ref: 4e100499
Node: Pragma Eliminate101225
Ref: gnat_rm/implementation_defined_pragmas pragma-eliminate101388
Ref: 4f101388
Node: Pragma Enable_Atomic_Synchronization104822
Ref: gnat_rm/implementation_defined_pragmas pragma-enable-atomic-synchronization104982
Ref: 50104982
Node: Pragma Export_Function105876
Ref: gnat_rm/implementation_defined_pragmas pragma-export-function106040
Ref: 51106040
Node: Pragma Export_Object108425
Ref: gnat_rm/implementation_defined_pragmas pragma-export-object108576
Ref: 52108576
Node: Pragma Export_Procedure109228
Ref: gnat_rm/implementation_defined_pragmas pragma-export-procedure109376
Ref: 53109376
Node: Pragma Export_Value110823
Ref: gnat_rm/implementation_defined_pragmas pragma-export-value110981
Ref: 54110981
Node: Pragma Export_Valued_Procedure111624
Ref: gnat_rm/implementation_defined_pragmas pragma-export-valued-procedure111779
Ref: 55111779
Node: Pragma Extend_System113573
Ref: gnat_rm/implementation_defined_pragmas pragma-extend-system113734
Ref: 56113734
Node: Pragma Extensions_Allowed115718
Ref: gnat_rm/implementation_defined_pragmas pragma-extensions-allowed115864
Ref: 57115864
Node: Pragma External116521
Ref: gnat_rm/implementation_defined_pragmas pragma-external116674
Ref: 58116674
Node: Pragma External_Name_Casing117228
Ref: gnat_rm/implementation_defined_pragmas pragma-external-name-casing117372
Ref: 59117372
Node: Pragma Fast_Math120341
Ref: gnat_rm/implementation_defined_pragmas pragma-fast-math120492
Ref: 5a120492
Node: Pragma Favor_Top_Level121352
Ref: gnat_rm/implementation_defined_pragmas pragma-favor-top-level121504
Ref: 5b121504
Node: Pragma Finalize_Storage_Only122129
Ref: gnat_rm/implementation_defined_pragmas pragma-finalize-storage-only122292
Ref: 5c122292
Node: Pragma Float_Representation122749
Ref: gnat_rm/implementation_defined_pragmas pragma-float-representation122903
Ref: 5d122903
Node: Pragma Global123742
Ref: gnat_rm/implementation_defined_pragmas pragma-global123880
Ref: 5e123880
Node: Pragma Ident124004
Ref: gnat_rm/implementation_defined_pragmas pragma-ident124135
Ref: 5f124135
Node: Pragma Ignore_Pragma124365
Ref: gnat_rm/implementation_defined_pragmas pragma-ignore-pragma124512
Ref: 60124512
Node: Pragma Implementation_Defined125132
Ref: gnat_rm/implementation_defined_pragmas pragma-implementation-defined125285
Ref: 61125285
Node: Pragma Implemented125996
Ref: gnat_rm/implementation_defined_pragmas pragma-implemented126152
Ref: 62126152
Node: Pragma Implicit_Packing127751
Ref: gnat_rm/implementation_defined_pragmas pragma-implicit-packing127900
Ref: 63127900
Node: Pragma Import_Function129710
Ref: gnat_rm/implementation_defined_pragmas pragma-import-function129861
Ref: 64129861
Node: Pragma Import_Object131957
Ref: gnat_rm/implementation_defined_pragmas pragma-import-object132108
Ref: 65132108
Node: Pragma Import_Procedure132791
Ref: gnat_rm/implementation_defined_pragmas pragma-import-procedure132950
Ref: 66132950
Node: Pragma Import_Valued_Procedure133886
Ref: gnat_rm/implementation_defined_pragmas pragma-import-valued-procedure134043
Ref: 67134043
Node: Pragma Independent135812
Ref: gnat_rm/implementation_defined_pragmas pragma-independent135975
Ref: 68135975
Node: Pragma Independent_Components136648
Ref: gnat_rm/implementation_defined_pragmas pragma-independent-components136805
Ref: 69136805
Node: Pragma Initial_Condition137462
Ref: gnat_rm/implementation_defined_pragmas pragma-initial-condition137626
Ref: 6a137626
Node: Pragma Initialize_Scalars137772
Ref: gnat_rm/implementation_defined_pragmas pragma-initialize-scalars137925
Ref: 6b137925
Node: Pragma Initializes140725
Ref: gnat_rm/implementation_defined_pragmas pragma-initializes140874
Ref: 6c140874
Node: Pragma Inline_Always141008
Ref: gnat_rm/implementation_defined_pragmas pragma-inline-always141153
Ref: 6d141153
Node: Pragma Inline_Generic141435
Ref: gnat_rm/implementation_defined_pragmas pragma-inline-generic141578
Ref: 6e141578
Node: Pragma Interface141959
Ref: gnat_rm/implementation_defined_pragmas pragma-interface142103
Ref: 6f142103
Node: Pragma Interface_Name143049
Ref: gnat_rm/implementation_defined_pragmas pragma-interface-name143196
Ref: 70143196
Node: Pragma Interrupt_Handler143702
Ref: gnat_rm/implementation_defined_pragmas pragma-interrupt-handler143855
Ref: 71143855
Node: Pragma Interrupt_State144539
Ref: gnat_rm/implementation_defined_pragmas pragma-interrupt-state144687
Ref: 72144687
Node: Pragma Invariant147628
Ref: gnat_rm/implementation_defined_pragmas pragma-invariant147775
Ref: 73147775
Node: Pragma Java_Constructor149419
Ref: gnat_rm/implementation_defined_pragmas pragma-java-constructor149565
Ref: 74149565
Node: Pragma Java_Interface149940
Ref: gnat_rm/implementation_defined_pragmas pragma-java-interface150087
Ref: 75150087
Node: Pragma Keep_Names150455
Ref: gnat_rm/implementation_defined_pragmas pragma-keep-names150593
Ref: 76150593
Node: Pragma License151182
Ref: gnat_rm/implementation_defined_pragmas pragma-license151315
Ref: 77151315
Node: Pragma Link_With154346
Ref: gnat_rm/implementation_defined_pragmas pragma-link-with154481
Ref: 78154481
Node: Pragma Linker_Alias155106
Ref: gnat_rm/implementation_defined_pragmas pragma-linker-alias155252
Ref: 79155252
Node: Pragma Linker_Constructor156478
Ref: gnat_rm/implementation_defined_pragmas pragma-linker-constructor156632
Ref: 7a156632
Node: Pragma Linker_Destructor157845
Ref: gnat_rm/implementation_defined_pragmas pragma-linker-destructor158001
Ref: 7b158001
Node: Pragma Linker_Section158762
Ref: gnat_rm/implementation_defined_pragmas pragma-linker-section158909
Ref: 7c158909
Node: Pragma Lock_Free161891
Ref: gnat_rm/implementation_defined_pragmas pragma-lock-free162035
Ref: 7d162035
Node: Pragma Loop_Invariant162332
Ref: gnat_rm/implementation_defined_pragmas pragma-loop-invariant162475
Ref: 7e162475
Node: Pragma Loop_Optimize163622
Ref: gnat_rm/implementation_defined_pragmas pragma-loop-optimize163768
Ref: 7f163768
Node: Pragma Loop_Variant165500
Ref: gnat_rm/implementation_defined_pragmas pragma-loop-variant165649
Ref: 80165649
Node: Pragma Machine_Attribute167400
Ref: gnat_rm/implementation_defined_pragmas pragma-machine-attribute167540
Ref: 81167540
Node: Pragma Main168368
Ref: gnat_rm/implementation_defined_pragmas pragma-main168508
Ref: 82168508
Node: Pragma Main_Storage168940
Ref: gnat_rm/implementation_defined_pragmas pragma-main-storage169070
Ref: 83169070
Node: Pragma No_Body169472
Ref: gnat_rm/implementation_defined_pragmas pragma-no-body169621
Ref: 84169621
Node: Pragma No_Elaboration_Code_All170399
Ref: gnat_rm/implementation_defined_pragmas pragma-no-elaboration-code-all170545
Ref: 85170545
Node: Pragma No_Inline171196
Ref: gnat_rm/implementation_defined_pragmas pragma-no-inline171344
Ref: 86171344
Node: Pragma No_Return171830
Ref: gnat_rm/implementation_defined_pragmas pragma-no-return171966
Ref: 87171966
Node: Pragma No_Run_Time172928
Ref: gnat_rm/implementation_defined_pragmas pragma-no-run-time173073
Ref: 88173073
Node: Pragma No_Strict_Aliasing173401
Ref: gnat_rm/implementation_defined_pragmas pragma-no-strict-aliasing173554
Ref: 89173554
Node: Pragma No_Tagged_Streams174268
Ref: gnat_rm/implementation_defined_pragmas pragma-no-tagged-streams174427
Ref: 8a174427
Node: Pragma Normalize_Scalars175919
Ref: gnat_rm/implementation_defined_pragmas pragma-normalize-scalars176071
Ref: 8b176071
Node: Pragma Obsolescent178984
Ref: gnat_rm/implementation_defined_pragmas pragma-obsolescent179137
Ref: 8c179137
Ref: gnat_rm/implementation_defined_pragmas id2179137
Ref: 8d179137
Node: Pragma Optimize_Alignment182501
Ref: gnat_rm/implementation_defined_pragmas pragma-optimize-alignment182644
Ref: 8e182644
Node: Pragma Ordered185968
Ref: gnat_rm/implementation_defined_pragmas pragma-ordered186113
Ref: 8f186113
Node: Pragma Overflow_Mode189155
Ref: gnat_rm/implementation_defined_pragmas pragma-overflow-mode189302
Ref: 90189302
Node: Pragma Overriding_Renamings190583
Ref: gnat_rm/implementation_defined_pragmas pragma-overriding-renamings190751
Ref: 91190751
Node: Pragma Partition_Elaboration_Policy191404
Ref: gnat_rm/implementation_defined_pragmas pragma-partition-elaboration-policy191566
Ref: 92191566
Node: Pragma Part_Of191940
Ref: gnat_rm/implementation_defined_pragmas pragma-part-of192089
Ref: 93192089
Node: Pragma Passive192217
Ref: gnat_rm/implementation_defined_pragmas pragma-passive192352
Ref: 94192352
Node: Pragma Persistent_BSS193198
Ref: gnat_rm/implementation_defined_pragmas pragma-persistent-bss193333
Ref: 95193333
Node: Pragma Polling194516
Ref: gnat_rm/implementation_defined_pragmas pragma-polling194648
Ref: 96194648
Node: Pragma Post196390
Ref: gnat_rm/implementation_defined_pragmas pragma-post196521
Ref: 97196521
Node: Pragma Postcondition197027
Ref: gnat_rm/implementation_defined_pragmas pragma-postcondition197161
Ref: 98197161
Node: Pragma Post_Class202801
Ref: gnat_rm/implementation_defined_pragmas pragma-post-class202934
Ref: 99202934
Node: Pragma Pre203965
Ref: gnat_rm/implementation_defined_pragmas pragma-pre204097
Ref: 9a204097
Node: Pragma Precondition204598
Ref: gnat_rm/implementation_defined_pragmas pragma-precondition204729
Ref: 9b204729
Node: Pragma Predicate206630
Ref: gnat_rm/implementation_defined_pragmas pragma-predicate206786
Ref: 9c206786
Node: Pragma Preelaborable_Initialization208500
Ref: gnat_rm/implementation_defined_pragmas pragma-preelaborable-initialization208669
Ref: 9d208669
Node: Pragma Prefix_Exception_Messages208986
Ref: gnat_rm/implementation_defined_pragmas pragma-prefix-exception-messages209155
Ref: 9e209155
Node: Pragma Pre_Class210068
Ref: gnat_rm/implementation_defined_pragmas pragma-pre-class210238
Ref: 9f210238
Node: Pragma Priority_Specific_Dispatching211259
Ref: gnat_rm/implementation_defined_pragmas pragma-priority-specific-dispatching211411
Ref: a0211411
Node: Pragma Profile212001
Ref: gnat_rm/implementation_defined_pragmas pragma-profile212160
Ref: a1212160
Node: Pragma Profile_Warnings217543
Ref: gnat_rm/implementation_defined_pragmas pragma-profile-warnings217693
Ref: a2217693
Node: Pragma Propagate_Exceptions218118
Ref: gnat_rm/implementation_defined_pragmas pragma-propagate-exceptions218284
Ref: a3218284
Node: Pragma Provide_Shift_Operators218680
Ref: gnat_rm/implementation_defined_pragmas pragma-provide-shift-operators218842
Ref: a4218842
Node: Pragma Psect_Object219402
Ref: gnat_rm/implementation_defined_pragmas pragma-psect-object219557
Ref: a5219557
Node: Pragma Pure_Function219899
Ref: gnat_rm/implementation_defined_pragmas pragma-pure-function220039
Ref: a6220039
Node: Pragma Rational223037
Ref: gnat_rm/implementation_defined_pragmas pragma-rational223174
Ref: a7223174
Node: Pragma Ravenscar223387
Ref: gnat_rm/implementation_defined_pragmas pragma-ravenscar223526
Ref: a8223526
Node: Pragma Refined_Depends223810
Ref: gnat_rm/implementation_defined_pragmas pragma-refined-depends223955
Ref: a9223955
Node: Pragma Refined_Global224099
Ref: gnat_rm/implementation_defined_pragmas pragma-refined-global224247
Ref: aa224247
Node: Pragma Refined_Post224389
Ref: gnat_rm/implementation_defined_pragmas pragma-refined-post224535
Ref: ab224535
Node: Pragma Refined_State224673
Ref: gnat_rm/implementation_defined_pragmas pragma-refined-state224822
Ref: ac224822
Node: Pragma Relative_Deadline224962
Ref: gnat_rm/implementation_defined_pragmas pragma-relative-deadline225117
Ref: ad225117
Node: Pragma Remote_Access_Type225410
Ref: gnat_rm/implementation_defined_pragmas pragma-remote-access-type225571
Ref: ae225571
Node: Pragma Restricted_Run_Time226443
Ref: gnat_rm/implementation_defined_pragmas pragma-restricted-run-time226607
Ref: af226607
Node: Pragma Restriction_Warnings226930
Ref: gnat_rm/implementation_defined_pragmas pragma-restriction-warnings227086
Ref: b0227086
Node: Pragma Reviewable228362
Ref: gnat_rm/implementation_defined_pragmas pragma-reviewable228512
Ref: b1228512
Node: Pragma Share_Generic231035
Ref: gnat_rm/implementation_defined_pragmas pragma-share-generic231171
Ref: b2231171
Node: Pragma Shared231562
Ref: gnat_rm/implementation_defined_pragmas pragma-shared231708
Ref: b3231708
Node: Pragma Short_Circuit_And_Or231862
Ref: gnat_rm/implementation_defined_pragmas pragma-short-circuit-and-or232012
Ref: b4232012
Node: Pragma Short_Descriptors232664
Ref: gnat_rm/implementation_defined_pragmas pragma-short-descriptors232832
Ref: b5232832
Node: Pragma Simple_Storage_Pool_Type233071
Ref: gnat_rm/implementation_defined_pragmas pragma-simple-storage-pool-type233235
Ref: b6233235
Node: Pragma Source_File_Name235458
Ref: gnat_rm/implementation_defined_pragmas pragma-source-file-name235629
Ref: b8235629
Ref: gnat_rm/implementation_defined_pragmas id3235629
Ref: b9235629
Node: Pragma Source_File_Name_Project239027
Ref: gnat_rm/implementation_defined_pragmas id4239190
Ref: bb239190
Ref: gnat_rm/implementation_defined_pragmas pragma-source-file-name-project239190
Ref: ba239190
Node: Pragma Source_Reference239965
Ref: gnat_rm/implementation_defined_pragmas pragma-source-reference240122
Ref: bc240122
Node: Pragma SPARK_Mode240950
Ref: gnat_rm/implementation_defined_pragmas pragma-spark-mode241109
Ref: bd241109
Node: Pragma Static_Elaboration_Desired243071
Ref: gnat_rm/implementation_defined_pragmas pragma-static-elaboration-desired243228
Ref: be243228
Node: Pragma Stream_Convert244234
Ref: gnat_rm/implementation_defined_pragmas pragma-stream-convert244393
Ref: bf244393
Node: Pragma Style_Checks247529
Ref: gnat_rm/implementation_defined_pragmas pragma-style-checks247670
Ref: c0247670
Node: Pragma Subtitle249934
Ref: gnat_rm/implementation_defined_pragmas pragma-subtitle250069
Ref: c1250069
Node: Pragma Suppress250270
Ref: gnat_rm/implementation_defined_pragmas pragma-suppress250405
Ref: c2250405
Node: Pragma Suppress_All252959
Ref: gnat_rm/implementation_defined_pragmas pragma-suppress-all253105
Ref: c3253105
Node: Pragma Suppress_Debug_Info253638
Ref: gnat_rm/implementation_defined_pragmas pragma-suppress-debug-info253804
Ref: c4253804
Node: Pragma Suppress_Exception_Locations254134
Ref: gnat_rm/implementation_defined_pragmas pragma-suppress-exception-locations254311
Ref: c5254311
Node: Pragma Suppress_Initialization255234
Ref: gnat_rm/implementation_defined_pragmas pragma-suppress-initialization255401
Ref: c6255401
Node: Pragma Task_Name256960
Ref: gnat_rm/implementation_defined_pragmas pragma-task-name257111
Ref: c7257111
Node: Pragma Task_Storage258659
Ref: gnat_rm/implementation_defined_pragmas pragma-task-storage258796
Ref: c8258796
Node: Pragma Test_Case259324
Ref: gnat_rm/implementation_defined_pragmas pragma-test-case259472
Ref: c9259472
Node: Pragma Thread_Local_Storage261480
Ref: gnat_rm/implementation_defined_pragmas pragma-thread-local-storage261626
Ref: ca261626
Node: Pragma Time_Slice262633
Ref: gnat_rm/implementation_defined_pragmas pragma-time-slice262775
Ref: cb262775
Node: Pragma Title263157
Ref: gnat_rm/implementation_defined_pragmas pragma-title263293
Ref: cc263293
Node: Pragma Type_Invariant264007
Ref: gnat_rm/implementation_defined_pragmas pragma-type-invariant264153
Ref: cd264153
Node: Pragma Type_Invariant_Class264669
Ref: gnat_rm/implementation_defined_pragmas pragma-type-invariant-class264825
Ref: ce264825
Node: Pragma Unchecked_Union265711
Ref: gnat_rm/implementation_defined_pragmas pragma-unchecked-union265875
Ref: cf265875
Node: Pragma Unevaluated_Use_Of_Old266437
Ref: gnat_rm/implementation_defined_pragmas pragma-unevaluated-use-of-old266599
Ref: d0266599
Node: Pragma Unimplemented_Unit268497
Ref: gnat_rm/implementation_defined_pragmas pragma-unimplemented-unit268662
Ref: d1268662
Node: Pragma Universal_Aliasing269188
Ref: gnat_rm/implementation_defined_pragmas pragma-universal-aliasing269345
Ref: d2269345
Node: Pragma Universal_Data269971
Ref: gnat_rm/implementation_defined_pragmas pragma-universal-data270120
Ref: d3270120
Node: Pragma Unmodified271048
Ref: gnat_rm/implementation_defined_pragmas pragma-unmodified271191
Ref: d4271191
Node: Pragma Unreferenced272240
Ref: gnat_rm/implementation_defined_pragmas pragma-unreferenced272389
Ref: d5272389
Node: Pragma Unreferenced_Objects274865
Ref: gnat_rm/implementation_defined_pragmas pragma-unreferenced-objects275028
Ref: d6275028
Node: Pragma Unreserve_All_Interrupts275802
Ref: gnat_rm/implementation_defined_pragmas pragma-unreserve-all-interrupts275963
Ref: d7275963
Node: Pragma Unsuppress277423
Ref: gnat_rm/implementation_defined_pragmas pragma-unsuppress277577
Ref: d8277577
Node: Pragma Use_VADS_Size278816
Ref: gnat_rm/implementation_defined_pragmas pragma-use-vads-size278961
Ref: d9278961
Node: Pragma Validity_Checks279517
Ref: gnat_rm/implementation_defined_pragmas pragma-validity-checks279660
Ref: da279660
Node: Pragma Volatile281393
Ref: gnat_rm/implementation_defined_pragmas pragma-volatile281539
Ref: db281539
Node: Pragma Warning_As_Error282008
Ref: gnat_rm/implementation_defined_pragmas pragma-warning-as-error282147
Ref: dc282147
Node: Pragma Warnings285256
Ref: gnat_rm/implementation_defined_pragmas id5285400
Ref: de285400
Ref: gnat_rm/implementation_defined_pragmas pragma-warnings285400
Ref: dd285400
Node: Pragma Weak_External292475
Ref: gnat_rm/implementation_defined_pragmas pragma-weak-external292626
Ref: df292626
Node: Pragma Wide_Character_Encoding294276
Ref: gnat_rm/implementation_defined_pragmas pragma-wide-character-encoding294403
Ref: e0294403
Node: Implementation Defined Aspects295296
Ref: gnat_rm/implementation_defined_aspects implementation-defined-aspects295448
Ref: e1295448
Ref: gnat_rm/implementation_defined_aspects doc295448
Ref: e2295448
Ref: gnat_rm/implementation_defined_aspects id1295448
Ref: e3295448
Node: Aspect Abstract_State298297
Ref: gnat_rm/implementation_defined_aspects aspect-abstract-state298403
Ref: e4298403
Node: Annotate298511
Ref: gnat_rm/implementation_defined_aspects annotate298646
Ref: e5298646
Node: Aspect Async_Readers299032
Ref: gnat_rm/implementation_defined_aspects aspect-async-readers299166
Ref: e6299166
Node: Aspect Async_Writers299279
Ref: gnat_rm/implementation_defined_aspects aspect-async-writers299426
Ref: e7299426
Node: Aspect Contract_Cases299539
Ref: gnat_rm/implementation_defined_aspects aspect-contract-cases299680
Ref: e8299680
Node: Aspect Depends299884
Ref: gnat_rm/implementation_defined_aspects aspect-depends300021
Ref: e9300021
Node: Aspect Dimension300108
Ref: gnat_rm/implementation_defined_aspects aspect-dimension300247
Ref: ea300247
Node: Aspect Dimension_System301442
Ref: gnat_rm/implementation_defined_aspects aspect-dimension-system301589
Ref: eb301589
Node: Aspect Effective_Reads304047
Ref: gnat_rm/implementation_defined_aspects aspect-effective-reads304201
Ref: ec304201
Node: Aspect Effective_Writes304312
Ref: gnat_rm/implementation_defined_aspects aspect-effective-writes304465
Ref: ed304465
Node: Aspect Favor_Top_Level304581
Ref: gnat_rm/implementation_defined_aspects aspect-favor-top-level304725
Ref: ee304725
Node: Aspect Global304846
Ref: gnat_rm/implementation_defined_aspects aspect-global304991
Ref: ef304991
Node: Aspect Initial_Condition305077
Ref: gnat_rm/implementation_defined_aspects aspect-initial-condition305218
Ref: f0305218
Node: Aspect Initializes305337
Ref: gnat_rm/implementation_defined_aspects aspect-initializes305485
Ref: f1305485
Node: Aspect Inline_Always305586
Ref: gnat_rm/implementation_defined_aspects aspect-inline-always305726
Ref: f2305726
Node: Aspect Invariant305841
Ref: gnat_rm/implementation_defined_aspects aspect-invariant305985
Ref: f3305985
Node: Aspect Invariant'Class306220
Ref: gnat_rm/implementation_defined_aspects aspect-invariant-class306359
Ref: f4306359
Node: Aspect Iterable306623
Ref: gnat_rm/implementation_defined_aspects aspect-iterable306767
Ref: f5306767
Node: Aspect Linker_Section308815
Ref: gnat_rm/implementation_defined_aspects aspect-linker-section308953
Ref: f6308953
Node: Aspect Lock_Free309066
Ref: gnat_rm/implementation_defined_aspects aspect-lock-free309219
Ref: f7309219
Node: Aspect No_Elaboration_Code_All309322
Ref: gnat_rm/implementation_defined_aspects aspect-no-elaboration-code-all309478
Ref: f8309478
Node: Aspect No_Tagged_Streams309646
Ref: gnat_rm/implementation_defined_aspects aspect-no-tagged-streams309804
Ref: f9309804
Node: Aspect Object_Size310026
Ref: gnat_rm/implementation_defined_aspects aspect-object-size310172
Ref: fa310172
Node: Aspect Obsolescent310297
Ref: gnat_rm/implementation_defined_aspects aspect-obsolescent310433
Ref: fb310433
Node: Aspect Part_Of310655
Ref: gnat_rm/implementation_defined_aspects aspect-part-of310794
Ref: fc310794
Node: Aspect Persistent_BSS310883
Ref: gnat_rm/implementation_defined_aspects aspect-persistent-bss311020
Ref: fd311020
Node: Aspect Predicate311138
Ref: gnat_rm/implementation_defined_aspects aspect-predicate311281
Ref: fe311281
Node: Aspect Pure_Function311648
Ref: gnat_rm/implementation_defined_aspects aspect-pure-function311792
Ref: ff311792
Node: Aspect Refined_Depends311907
Ref: gnat_rm/implementation_defined_aspects aspect-refined-depends312056
Ref: 100312056
Node: Aspect Refined_Global312169
Ref: gnat_rm/implementation_defined_aspects aspect-refined-global312317
Ref: 101312317
Node: Aspect Refined_Post312427
Ref: gnat_rm/implementation_defined_aspects aspect-refined-post312573
Ref: 102312573
Node: Aspect Refined_State312677
Ref: gnat_rm/implementation_defined_aspects aspect-refined-state312827
Ref: 103312827
Node: Aspect Remote_Access_Type312934
Ref: gnat_rm/implementation_defined_aspects aspect-remote-access-type313092
Ref: 104313092
Node: Aspect Scalar_Storage_Order313214
Ref: gnat_rm/implementation_defined_aspects aspect-scalar-storage-order313365
Ref: 105313365
Node: Aspect Shared313516
Ref: gnat_rm/implementation_defined_aspects aspect-shared313668
Ref: 106313668
Node: Aspect Simple_Storage_Pool313805
Ref: gnat_rm/implementation_defined_aspects aspect-simple-storage-pool313961
Ref: 107313961
Node: Aspect Simple_Storage_Pool_Type314109
Ref: gnat_rm/implementation_defined_aspects aspect-simple-storage-pool-type314269
Ref: 108314269
Node: Aspect SPARK_Mode314417
Ref: gnat_rm/implementation_defined_aspects aspect-spark-mode314577
Ref: 109314577
Node: Aspect Suppress_Debug_Info314772
Ref: gnat_rm/implementation_defined_aspects aspect-suppress-debug-info314931
Ref: 10a314931
Node: Aspect Suppress_Initialization315064
Ref: gnat_rm/implementation_defined_aspects aspect-suppress-initialization315222
Ref: 10b315222
Node: Aspect Test_Case315367
Ref: gnat_rm/implementation_defined_aspects aspect-test-case315526
Ref: 10c315526
Node: Aspect Thread_Local_Storage315621
Ref: gnat_rm/implementation_defined_aspects aspect-thread-local-storage315775
Ref: 10d315775
Node: Aspect Universal_Aliasing315911
Ref: gnat_rm/implementation_defined_aspects aspect-universal-aliasing316070
Ref: 10e316070
Node: Aspect Universal_Data316200
Ref: gnat_rm/implementation_defined_aspects aspect-universal-data316349
Ref: 10f316349
Node: Aspect Unmodified316459
Ref: gnat_rm/implementation_defined_aspects aspect-unmodified316602
Ref: 110316602
Node: Aspect Unreferenced316708
Ref: gnat_rm/implementation_defined_aspects aspect-unreferenced316857
Ref: 111316857
Node: Aspect Unreferenced_Objects317119
Ref: gnat_rm/implementation_defined_aspects aspect-unreferenced-objects317268
Ref: 112317268
Node: Aspect Value_Size317404
Ref: gnat_rm/implementation_defined_aspects aspect-value-size317549
Ref: 113317549
Node: Aspect Warnings317670
Ref: gnat_rm/implementation_defined_aspects aspect-warnings317779
Ref: 114317779
Node: Implementation Defined Attributes317977
Ref: gnat_rm/implementation_defined_attributes doc318147
Ref: 115318147
Ref: gnat_rm/implementation_defined_attributes implementation-defined-attributes318147
Ref: 8318147
Ref: gnat_rm/implementation_defined_attributes id1318147
Ref: 116318147
Node: Attribute Abort_Signal321198
Ref: gnat_rm/implementation_defined_attributes attribute-abort-signal321322
Ref: 117321322
Node: Attribute Address_Size321749
Ref: gnat_rm/implementation_defined_attributes attribute-address-size321901
Ref: 118321901
Node: Attribute Asm_Input322266
Ref: gnat_rm/implementation_defined_attributes attribute-asm-input322416
Ref: 119322416
Node: Attribute Asm_Output323037
Ref: gnat_rm/implementation_defined_attributes attribute-asm-output323198
Ref: 11b323198
Node: Attribute Atomic_Always_Lock_Free323965
Ref: gnat_rm/implementation_defined_attributes attribute-atomic-always-lock-free324120
Ref: 11c324120
Node: Attribute Bit324455
Ref: gnat_rm/implementation_defined_attributes attribute-bit324612
Ref: 11d324612
Node: Attribute Bit_Position325673
Ref: gnat_rm/implementation_defined_attributes attribute-bit-position325819
Ref: 11e325819
Node: Attribute Code_Address326245
Ref: gnat_rm/implementation_defined_attributes attribute-code-address326404
Ref: 11f326404
Node: Attribute Compiler_Version327702
Ref: gnat_rm/implementation_defined_attributes attribute-compiler-version327860
Ref: 120327860
Node: Attribute Constrained328122
Ref: gnat_rm/implementation_defined_attributes attribute-constrained328285
Ref: 121328285
Node: Attribute Default_Bit_Order328751
Ref: gnat_rm/implementation_defined_attributes attribute-default-bit-order328926
Ref: 122328926
Node: Attribute Default_Scalar_Storage_Order329270
Ref: gnat_rm/implementation_defined_attributes attribute-default-scalar-storage-order329439
Ref: 123329439
Node: Attribute Deref329843
Ref: gnat_rm/implementation_defined_attributes attribute-deref330010
Ref: 124330010
Node: Attribute Descriptor_Size330412
Ref: gnat_rm/implementation_defined_attributes attribute-descriptor-size330561
Ref: 125330561
Node: Attribute Elaborated331421
Ref: gnat_rm/implementation_defined_attributes attribute-elaborated331574
Ref: 126331574
Node: Attribute Elab_Body332112
Ref: gnat_rm/implementation_defined_attributes attribute-elab-body332259
Ref: 127332259
Node: Attribute Elab_Spec332809
Ref: gnat_rm/implementation_defined_attributes attribute-elab-spec332960
Ref: 128332960
Node: Attribute Elab_Subp_Body333510
Ref: gnat_rm/implementation_defined_attributes attribute-elab-subp-body333656
Ref: 129333656
Node: Attribute Emax334076
Ref: gnat_rm/implementation_defined_attributes attribute-emax334220
Ref: 12a334220
Node: Attribute Enabled334420
Ref: gnat_rm/implementation_defined_attributes attribute-enabled334558
Ref: 12b334558
Node: Attribute Enum_Rep335645
Ref: gnat_rm/implementation_defined_attributes attribute-enum-rep335787
Ref: 12c335787
Node: Attribute Enum_Val337095
Ref: gnat_rm/implementation_defined_attributes attribute-enum-val337237
Ref: 12d337237
Node: Attribute Epsilon337814
Ref: gnat_rm/implementation_defined_attributes attribute-epsilon337957
Ref: 12e337957
Node: Attribute Fast_Math338166
Ref: gnat_rm/implementation_defined_attributes attribute-fast-math338312
Ref: 12f338312
Node: Attribute Fixed_Value338522
Ref: gnat_rm/implementation_defined_attributes attribute-fixed-value338669
Ref: 130338669
Node: Attribute From_Any339353
Ref: gnat_rm/implementation_defined_attributes attribute-from-any339508
Ref: 131339508
Node: Attribute Has_Access_Values339685
Ref: gnat_rm/implementation_defined_attributes attribute-has-access-values339846
Ref: 132339846
Node: Attribute Has_Discriminants340368
Ref: gnat_rm/implementation_defined_attributes attribute-has-discriminants340524
Ref: 133340524
Node: Attribute Img340961
Ref: gnat_rm/implementation_defined_attributes attribute-img341113
Ref: 134341113
Node: Attribute Integer_Value341764
Ref: gnat_rm/implementation_defined_attributes attribute-integer-value341912
Ref: 135341912
Node: Attribute Invalid_Value342654
Ref: gnat_rm/implementation_defined_attributes attribute-invalid-value342807
Ref: 136342807
Node: Attribute Iterable343277
Ref: gnat_rm/implementation_defined_attributes attribute-iterable343422
Ref: 137343422
Node: Attribute Large343503
Ref: gnat_rm/implementation_defined_attributes attribute-large343648
Ref: 138343648
Node: Attribute Library_Level343851
Ref: gnat_rm/implementation_defined_attributes attribute-library-level343997
Ref: 139343997
Node: Attribute Lock_Free344619
Ref: gnat_rm/implementation_defined_attributes attribute-lock-free344770
Ref: 13a344770
Node: Attribute Loop_Entry344919
Ref: gnat_rm/implementation_defined_attributes attribute-loop-entry345069
Ref: 13b345069
Node: Attribute Machine_Size346034
Ref: gnat_rm/implementation_defined_attributes attribute-machine-size346183
Ref: 13c346183
Node: Attribute Mantissa346379
Ref: gnat_rm/implementation_defined_attributes attribute-mantissa346535
Ref: 13d346535
Node: Attribute Maximum_Alignment346747
Ref: gnat_rm/implementation_defined_attributes attribute-maximum-alignment346905
Ref: 13e346905
Ref: gnat_rm/implementation_defined_attributes id2346905
Ref: 13f346905
Node: Attribute Mechanism_Code347241
Ref: gnat_rm/implementation_defined_attributes attribute-mechanism-code347405
Ref: 140347405
Node: Attribute Null_Parameter347810
Ref: gnat_rm/implementation_defined_attributes attribute-null-parameter347968
Ref: 141347968
Node: Attribute Object_Size348681
Ref: gnat_rm/implementation_defined_attributes attribute-object-size348828
Ref: 142348828
Node: Attribute Old351019
Ref: gnat_rm/implementation_defined_attributes attribute-old351171
Ref: 143351171
Node: Attribute Passed_By_Reference351600
Ref: gnat_rm/implementation_defined_attributes attribute-passed-by-reference351753
Ref: 144351753
Node: Attribute Pool_Address352146
Ref: gnat_rm/implementation_defined_attributes attribute-pool-address352308
Ref: 145352308
Node: Attribute Range_Length353019
Ref: gnat_rm/implementation_defined_attributes attribute-range-length353165
Ref: 146353165
Node: Attribute Ref353537
Ref: gnat_rm/implementation_defined_attributes attribute-ref353686
Ref: 147353686
Node: Attribute Restriction_Set353725
Ref: gnat_rm/implementation_defined_attributes attribute-restriction-set353868
Ref: 148353868
Node: Attribute Result356322
Ref: gnat_rm/implementation_defined_attributes attribute-result356471
Ref: 149356471
Node: Attribute Safe_Emax356868
Ref: gnat_rm/implementation_defined_attributes attribute-safe-emax357012
Ref: 14a357012
Node: Attribute Safe_Large357226
Ref: gnat_rm/implementation_defined_attributes attribute-safe-large357374
Ref: 14b357374
Node: Attribute Safe_Small357591
Ref: gnat_rm/implementation_defined_attributes attribute-safe-small357750
Ref: 14c357750
Node: Attribute Scalar_Storage_Order357967
Ref: gnat_rm/implementation_defined_attributes attribute-scalar-storage-order358135
Ref: 14d358135
Node: Attribute Simple_Storage_Pool362333
Ref: gnat_rm/implementation_defined_attributes attribute-simple-storage-pool362496
Ref: b7362496
Ref: gnat_rm/implementation_defined_attributes id3362496
Ref: 14e362496
Node: Attribute Small365006
Ref: gnat_rm/implementation_defined_attributes attribute-small365161
Ref: 14f365161
Node: Attribute Storage_Unit365524
Ref: gnat_rm/implementation_defined_attributes attribute-storage-unit365669
Ref: 150365669
Node: Attribute Stub_Type365845
Ref: gnat_rm/implementation_defined_attributes attribute-stub-type366011
Ref: 151366011
Node: Attribute System_Allocator_Alignment366940
Ref: gnat_rm/implementation_defined_attributes attribute-system-allocator-alignment367105
Ref: 152367105
Node: Attribute Target_Name367575
Ref: gnat_rm/implementation_defined_attributes attribute-target-name367741
Ref: 153367741
Node: Attribute To_Address368107
Ref: gnat_rm/implementation_defined_attributes attribute-to-address368253
Ref: 154368253
Node: Attribute To_Any369066
Ref: gnat_rm/implementation_defined_attributes attribute-to-any369211
Ref: 155369211
Node: Attribute Type_Class369384
Ref: gnat_rm/implementation_defined_attributes attribute-type-class369527
Ref: 156369527
Node: Attribute Type_Key370362
Ref: gnat_rm/implementation_defined_attributes attribute-type-key370507
Ref: 157370507
Node: Attribute TypeCode370811
Ref: gnat_rm/implementation_defined_attributes attribute-typecode370957
Ref: 158370957
Node: Attribute UET_Address371134
Ref: gnat_rm/implementation_defined_attributes attribute-uet-address371291
Ref: 159371291
Node: Attribute Unconstrained_Array371744
Ref: gnat_rm/implementation_defined_attributes attribute-unconstrained-array371917
Ref: 15a371917
Node: Attribute Universal_Literal_String372319
Ref: gnat_rm/implementation_defined_attributes attribute-universal-literal-string372500
Ref: 15b372500
Node: Attribute Unrestricted_Access373182
Ref: gnat_rm/implementation_defined_attributes attribute-unrestricted-access373350
Ref: 15c373350
Node: Attribute Update379521
Ref: gnat_rm/implementation_defined_attributes attribute-update379678
Ref: 15d379678
Node: Attribute Valid_Scalars382434
Ref: gnat_rm/implementation_defined_attributes attribute-valid-scalars382581
Ref: 15e382581
Node: Attribute VADS_Size384306
Ref: gnat_rm/implementation_defined_attributes attribute-vads-size384457
Ref: 15f384457
Node: Attribute Value_Size385078
Ref: gnat_rm/implementation_defined_attributes attribute-value-size385228
Ref: 160385228
Node: Attribute Wchar_T_Size385461
Ref: gnat_rm/implementation_defined_attributes attribute-wchar-t-size385611
Ref: 161385611
Node: Attribute Word_Size385902
Ref: gnat_rm/implementation_defined_attributes attribute-word-size386023
Ref: 162386023
Node: Standard and Implementation Defined Restrictions386212
Ref: gnat_rm/standard_and_implementation_defined_restrictions standard-and-implementation-defined-restrictions386373
Ref: 9386373
Ref: gnat_rm/standard_and_implementation_defined_restrictions doc386373
Ref: 163386373
Ref: gnat_rm/standard_and_implementation_defined_restrictions id1386373
Ref: 164386373
Node: Partition-Wide Restrictions386903
Ref: gnat_rm/standard_and_implementation_defined_restrictions partition-wide-restrictions387056
Ref: 165387056
Ref: gnat_rm/standard_and_implementation_defined_restrictions id2387056
Ref: 166387056
Node: Immediate_Reclamation389144
Ref: gnat_rm/standard_and_implementation_defined_restrictions immediate-reclamation389270
Ref: 167389270
Node: Max_Asynchronous_Select_Nesting389583
Ref: gnat_rm/standard_and_implementation_defined_restrictions max-asynchronous-select-nesting389740
Ref: 168389740
Node: Max_Entry_Queue_Length390071
Ref: gnat_rm/standard_and_implementation_defined_restrictions max-entry-queue-length390228
Ref: 169390228
Node: Max_Protected_Entries390914
Ref: gnat_rm/standard_and_implementation_defined_restrictions max-protected-entries391063
Ref: 16a391063
Node: Max_Select_Alternatives391348
Ref: gnat_rm/standard_and_implementation_defined_restrictions max-select-alternatives391498
Ref: 16b391498
Node: Max_Storage_At_Blocking391637
Ref: gnat_rm/standard_and_implementation_defined_restrictions max-storage-at-blocking391782
Ref: 16c391782
Node: Max_Task_Entries392037
Ref: gnat_rm/standard_and_implementation_defined_restrictions max-task-entries392168
Ref: 16d392168
Node: Max_Tasks392429
Ref: gnat_rm/standard_and_implementation_defined_restrictions max-tasks392556
Ref: 16e392556
Node: No_Abort_Statements392884
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-abort-statements393025
Ref: 16f393025
Node: No_Access_Parameter_Allocators393177
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-access-parameter-allocators393330
Ref: 170393330
Node: No_Access_Subprograms393552
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-access-subprograms393699
Ref: 171393699
Node: No_Allocators393871
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-allocators394011
Ref: 172394011
Node: No_Anonymous_Allocators394152
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-anonymous-allocators394282
Ref: 173394282
Node: No_Calendar394468
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-calendar394600
Ref: 174394600
Node: No_Coextensions394768
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-coextensions394902
Ref: 175394902
Node: No_Default_Initialization395044
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-default-initialization395175
Ref: 176395175
Node: No_Delay395872
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-delay396001
Ref: 177396001
Node: No_Dependence396160
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-dependence396291
Ref: 178396291
Node: No_Direct_Boolean_Operators396436
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-direct-boolean-operators396570
Ref: 179396570
Node: No_Dispatch396970
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-dispatch397111
Ref: 17a397111
Node: No_Dispatching_Calls397275
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-dispatching-calls397410
Ref: 17b397410
Node: No_Dynamic_Attachment399466
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-dynamic-attachment399611
Ref: 17c399611
Node: No_Dynamic_Priorities400145
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-dynamic-priorities400304
Ref: 17d400304
Node: No_Entry_Calls_In_Elaboration_Code400443
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-entry-calls-in-elaboration-code400600
Ref: 17e400600
Node: No_Enumeration_Maps400960
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-enumeration-maps401117
Ref: 17f401117
Node: No_Exception_Handlers401343
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-exception-handlers401490
Ref: 180401490
Node: No_Exception_Propagation402356
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-exception-propagation402509
Ref: 181402509
Node: No_Exception_Registration403178
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-exception-registration403323
Ref: 182403323
Node: No_Exceptions403803
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-exceptions403939
Ref: 183403939
Node: No_Finalization404095
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-finalization404220
Ref: 184404220
Node: No_Fixed_Point405034
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-fixed-point405163
Ref: 185405163
Node: No_Floating_Point405326
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-floating-point405464
Ref: 186405464
Node: No_Implicit_Conditionals405636
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-implicit-conditionals405784
Ref: 187405784
Node: No_Implicit_Dynamic_Code406416
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-implicit-dynamic-code406575
Ref: 188406575
Node: No_Implicit_Heap_Allocations407763
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-implicit-heap-allocations407915
Ref: 189407915
Node: No_Implicit_Loops408059
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-implicit-loops408208
Ref: 18a408208
Node: No_Initialize_Scalars408798
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-initialize-scalars408924
Ref: 18b408924
Node: No_IO409267
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-io409395
Ref: 18c409395
Node: No_Local_Allocators409613
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-local-allocators409746
Ref: 18d409746
Node: No_Local_Protected_Objects409960
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-local-protected-objects410110
Ref: 18e410110
Node: No_Local_Timing_Events410293
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-local-timing-events410445
Ref: 18f410445
Node: No_Long_Long_Integers410602
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-long-long-integers410751
Ref: 190410751
Node: No_Multiple_Elaboration411059
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-multiple-elaboration411208
Ref: 191411208
Node: No_Nested_Finalization412054
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-nested-finalization412210
Ref: 192412210
Node: No_Protected_Type_Allocators412351
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-protected-type-allocators412502
Ref: 193412502
Node: No_Protected_Types412710
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-protected-types412851
Ref: 194412851
Node: No_Recursion413027
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-recursion413153
Ref: 195413153
Node: No_Reentrancy413290
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-reentrancy413415
Ref: 196413415
Node: No_Relative_Delay413560
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-relative-delay413694
Ref: 197413694
Node: No_Requeue_Statements413918
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-requeue-statements414057
Ref: 198414057
Node: No_Secondary_Stack414511
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-secondary-stack414653
Ref: 199414653
Node: No_Select_Statements414955
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-select-statements415108
Ref: 19a415108
Node: No_Specific_Termination_Handlers415309
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-specific-termination-handlers415470
Ref: 19b415470
Node: No_Specification_of_Aspect415670
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-specification-of-aspect415851
Ref: 19c415851
Node: No_Standard_Allocators_After_Elaboration416072
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-standard-allocators-after-elaboration416246
Ref: 19d416246
Node: No_Standard_Storage_Pools416560
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-standard-storage-pools416731
Ref: 19e416731
Node: No_Stream_Optimizations417026
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-stream-optimizations417167
Ref: 19f417167
Node: No_Streams417583
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-streams417717
Ref: 1a0417717
Node: No_Task_Allocators418429
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-task-allocators418566
Ref: 1a1418566
Node: No_Task_Attributes_Package418708
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-task-attributes-package418852
Ref: 1a2418852
Node: No_Task_Hierarchy419311
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-task-hierarchy419456
Ref: 1a3419456
Node: No_Task_Termination419603
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-task-termination419732
Ref: 1a4419732
Node: No_Tasking419833
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-tasking419970
Ref: 1a5419970
Node: No_Terminate_Alternatives420286
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-terminate-alternatives420423
Ref: 1a6420423
Node: No_Unchecked_Access420560
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-unchecked-access420703
Ref: 1a7420703
Node: No_Use_Of_Entity420874
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-use-of-entity421007
Ref: 1a8421007
Node: Simple_Barriers421299
Ref: gnat_rm/standard_and_implementation_defined_restrictions simple-barriers421430
Ref: 1a9421430
Node: Static_Priorities422020
Ref: gnat_rm/standard_and_implementation_defined_restrictions static-priorities422154
Ref: 1aa422154
Node: Static_Storage_Size422371
Ref: gnat_rm/standard_and_implementation_defined_restrictions static-storage-size422481
Ref: 1ab422481
Node: Program Unit Level Restrictions422682
Ref: gnat_rm/standard_and_implementation_defined_restrictions program-unit-level-restrictions422835
Ref: 1ac422835
Ref: gnat_rm/standard_and_implementation_defined_restrictions id3422835
Ref: 1ad422835
Node: No_Elaboration_Code423480
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-elaboration-code423591
Ref: 1ae423591
Node: No_Entry_Queue425799
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-entry-queue425958
Ref: 1af425958
Node: No_Implementation_Aspect_Specifications426344
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-implementation-aspect-specifications426512
Ref: 1b0426512
Node: No_Implementation_Attributes426806
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-implementation-attributes426989
Ref: 1b1426989
Node: No_Implementation_Identifiers427267
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-implementation-identifiers427436
Ref: 1b2427436
Node: No_Implementation_Pragmas427690
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-implementation-pragmas427861
Ref: 1b3427861
Node: No_Implementation_Restrictions428127
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-implementation-restrictions428292
Ref: 1b4428292
Node: No_Implementation_Units428653
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-implementation-units428813
Ref: 1b5428813
Node: No_Implicit_Aliasing429057
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-implicit-aliasing429210
Ref: 1b6429210
Node: No_Obsolescent_Features429753
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-obsolescent-features429901
Ref: 1b7429901
Node: No_Wide_Characters430108
Ref: gnat_rm/standard_and_implementation_defined_restrictions no-wide-characters430244
Ref: 1b8430244
Node: SPARK_05430596
Ref: gnat_rm/standard_and_implementation_defined_restrictions spark-05430700
Ref: 1b9430700
Node: Implementation Advice438044
Ref: gnat_rm/implementation_advice doc438210
Ref: 1ba438210
Ref: gnat_rm/implementation_advice implementation-advice438210
Ref: a438210
Ref: gnat_rm/implementation_advice id1438210
Ref: 1bb438210
Node: RM 1 1 3 20 Error Detection444058
Ref: gnat_rm/implementation_advice rm-1-1-3-20-error-detection444176
Ref: 1bc444176
Node: RM 1 1 3 31 Child Units444513
Ref: gnat_rm/implementation_advice rm-1-1-3-31-child-units444666
Ref: 1bd444666
Node: RM 1 1 5 12 Bounded Errors444956
Ref: gnat_rm/implementation_advice rm-1-1-5-12-bounded-errors445099
Ref: 1be445099
Node: RM 2 8 16 Pragmas445430
Ref: gnat_rm/implementation_advice id2445570
Ref: 1bf445570
Ref: gnat_rm/implementation_advice rm-2-8-16-pragmas445570
Ref: 1c0445570
Node: RM 2 8 17-19 Pragmas446662
Ref: gnat_rm/implementation_advice rm-2-8-17-19-pragmas446813
Ref: 1c1446813
Node: RM 3 5 2 5 Alternative Character Sets447235
Ref: gnat_rm/implementation_advice rm-3-5-2-5-alternative-character-sets447394
Ref: 1c2447394
Node: RM 3 5 4 28 Integer Types448516
Ref: gnat_rm/implementation_advice rm-3-5-4-28-integer-types448680
Ref: 1c3448680
Node: RM 3 5 4 29 Integer Types449330
Ref: gnat_rm/implementation_advice rm-3-5-4-29-integer-types449486
Ref: 1c4449486
Node: RM 3 5 5 8 Enumeration Values449790
Ref: gnat_rm/implementation_advice rm-3-5-5-8-enumeration-values449944
Ref: 1c5449944
Node: RM 3 5 7 17 Float Types450481
Ref: gnat_rm/implementation_advice rm-3-5-7-17-float-types450645
Ref: 1c6450645
Node: RM 3 6 2 11 Multidimensional Arrays451725
Ref: gnat_rm/implementation_advice rm-3-6-2-11-multidimensional-arrays451887
Ref: 1c7451887
Node: RM 9 6 30-31 Duration'Small452371
Ref: gnat_rm/implementation_advice rm-9-6-30-31-duration-small452548
Ref: 1c8452548
Node: RM 10 2 1 12 Consistent Representation452944
Ref: gnat_rm/implementation_advice rm-10-2-1-12-consistent-representation453120
Ref: 1c9453120
Node: RM 11 4 1 19 Exception Information453906
Ref: gnat_rm/implementation_advice rm-11-4-1-19-exception-information454087
Ref: 1ca454087
Node: RM 11 5 28 Suppression of Checks455176
Ref: gnat_rm/implementation_advice rm-11-5-28-suppression-of-checks455355
Ref: 1cb455355
Node: RM 13 1 21-24 Representation Clauses455551
Ref: gnat_rm/implementation_advice rm-13-1-21-24-representation-clauses455720
Ref: 1cc455720
Node: RM 13 2 6-8 Packed Types457119
Ref: gnat_rm/implementation_advice rm-13-2-6-8-packed-types457285
Ref: 1cd457285
Node: RM 13 3 14-19 Address Clauses458599
Ref: gnat_rm/implementation_advice rm-13-3-14-19-address-clauses458760
Ref: 1ce458760
Node: RM 13 3 29-35 Alignment Clauses459843
Ref: gnat_rm/implementation_advice rm-13-3-29-35-alignment-clauses460006
Ref: 1cf460006
Node: RM 13 3 42-43 Size Clauses461175
Ref: gnat_rm/implementation_advice rm-13-3-42-43-size-clauses461335
Ref: 1d0461335
Node: RM 13 3 50-56 Size Clauses461768
Ref: gnat_rm/implementation_advice rm-13-3-50-56-size-clauses461933
Ref: 1d1461933
Node: RM 13 3 71-73 Component Size Clauses463258
Ref: gnat_rm/implementation_advice rm-13-3-71-73-component-size-clauses463444
Ref: 1d2463444
Node: RM 13 4 9-10 Enumeration Representation Clauses464232
Ref: gnat_rm/implementation_advice rm-13-4-9-10-enumeration-representation-clauses464437
Ref: 1d3464437
Node: RM 13 5 1 17-22 Record Representation Clauses464851
Ref: gnat_rm/implementation_advice rm-13-5-1-17-22-record-representation-clauses465056
Ref: 1d4465056
Node: RM 13 5 2 5 Storage Place Attributes466715
Ref: gnat_rm/implementation_advice rm-13-5-2-5-storage-place-attributes466899
Ref: 1d5466899
Node: RM 13 5 3 7-8 Bit Ordering467507
Ref: gnat_rm/implementation_advice rm-13-5-3-7-8-bit-ordering467675
Ref: 1d6467675
Node: RM 13 7 37 Address as Private468107
Ref: gnat_rm/implementation_advice rm-13-7-37-address-as-private468270
Ref: 1d7468270
Node: RM 13 7 1 16 Address Operations468403
Ref: gnat_rm/implementation_advice rm-13-7-1-16-address-operations468574
Ref: 1d8468574
Node: RM 13 9 14-17 Unchecked Conversion469093
Ref: gnat_rm/implementation_advice rm-13-9-14-17-unchecked-conversion469269
Ref: 1d9469269
Node: RM 13 11 23-25 Implicit Heap Usage470646
Ref: gnat_rm/implementation_advice rm-13-11-23-25-implicit-heap-usage470827
Ref: 1da470827
Node: RM 13 11 2 17 Unchecked Deallocation471834
Ref: gnat_rm/implementation_advice rm-13-11-2-17-unchecked-deallocation472021
Ref: 1db472021
Node: RM 13 13 2 17 Stream Oriented Attributes472207
Ref: gnat_rm/implementation_advice rm-13-13-2-17-stream-oriented-attributes472403
Ref: 1dc472403
Node: RM A 1 52 Names of Predefined Numeric Types473928
Ref: gnat_rm/implementation_advice rm-a-1-52-names-of-predefined-numeric-types474123
Ref: 1dd474123
Node: RM A 3 2 49 Ada Characters Handling474541
Ref: gnat_rm/implementation_advice rm-a-3-2-49-ada-characters-handling474739
Ref: 1de474739
Node: RM A 4 4 106 Bounded-Length String Handling475111
Ref: gnat_rm/implementation_advice rm-a-4-4-106-bounded-length-string-handling475305
Ref: 1df475305
Node: RM A 5 2 46-47 Random Number Generation475580
Ref: gnat_rm/implementation_advice rm-a-5-2-46-47-random-number-generation475765
Ref: 1e0475765
Node: RM A 10 7 23 Get_Immediate476577
Ref: gnat_rm/implementation_advice rm-a-10-7-23-get-immediate476745
Ref: 1e1476745
Node: RM B 1 39-41 Pragma Export477571
Ref: gnat_rm/implementation_advice rm-b-1-39-41-pragma-export477731
Ref: 1e2477731
Node: RM B 2 12-13 Package Interfaces479195
Ref: gnat_rm/implementation_advice rm-b-2-12-13-package-interfaces479360
Ref: 1e3479360
Node: RM B 3 63-71 Interfacing with C480157
Ref: gnat_rm/implementation_advice rm-b-3-63-71-interfacing-with-c480331
Ref: 1e4480331
Node: RM B 4 95-98 Interfacing with COBOL482141
Ref: gnat_rm/implementation_advice rm-b-4-95-98-interfacing-with-cobol482321
Ref: 1e5482321
Node: RM B 5 22-26 Interfacing with Fortran483019
Ref: gnat_rm/implementation_advice rm-b-5-22-26-interfacing-with-fortran483207
Ref: 1e6483207
Node: RM C 1 3-5 Access to Machine Operations484255
Ref: gnat_rm/implementation_advice rm-c-1-3-5-access-to-machine-operations484449
Ref: 1e7484449
Node: RM C 1 10-16 Access to Machine Operations485409
Ref: gnat_rm/implementation_advice rm-c-1-10-16-access-to-machine-operations485593
Ref: 1e8485593
Node: RM C 3 28 Interrupt Support486831
Ref: gnat_rm/implementation_advice rm-c-3-28-interrupt-support487019
Ref: 1e9487019
Node: RM C 3 1 20-21 Protected Procedure Handlers487477
Ref: gnat_rm/implementation_advice rm-c-3-1-20-21-protected-procedure-handlers487654
Ref: 1ea487654
Node: RM C 3 2 25 Package Interrupts488150
Ref: gnat_rm/implementation_advice rm-c-3-2-25-package-interrupts488338
Ref: 1eb488338
Node: RM C 4 14 Pre-elaboration Requirements488792
Ref: gnat_rm/implementation_advice rm-c-4-14-pre-elaboration-requirements488966
Ref: 1ec488966
Node: RM C 5 8 Pragma Discard_Names489402
Ref: gnat_rm/implementation_advice rm-c-5-8-pragma-discard-names489585
Ref: 1ed489585
Node: RM C 7 2 30 The Package Task_Attributes489841
Ref: gnat_rm/implementation_advice rm-c-7-2-30-the-package-task-attributes490012
Ref: 1ee490012
Node: RM D 3 17 Locking Policies490734
Ref: gnat_rm/implementation_advice rm-d-3-17-locking-policies490908
Ref: 1ef490908
Node: RM D 4 16 Entry Queuing Policies491265
Ref: gnat_rm/implementation_advice rm-d-4-16-entry-queuing-policies491428
Ref: 1f0491428
Node: RM D 6 9-10 Preemptive Abort491684
Ref: gnat_rm/implementation_advice rm-d-6-9-10-preemptive-abort491851
Ref: 1f1491851
Node: RM D 7 21 Tasking Restrictions492409
Ref: gnat_rm/implementation_advice rm-d-7-21-tasking-restrictions492571
Ref: 1f2492571
Node: RM D 8 47-49 Monotonic Time493061
Ref: gnat_rm/implementation_advice rm-d-8-47-49-monotonic-time493241
Ref: 1f3493241
Node: RM E 5 28-29 Partition Communication Subsystem493884
Ref: gnat_rm/implementation_advice rm-e-5-28-29-partition-communication-subsystem494054
Ref: 1f4494054
Node: RM F 7 COBOL Support494724
Ref: gnat_rm/implementation_advice rm-f-7-cobol-support494897
Ref: 1f5494897
Node: RM F 1 2 Decimal Radix Support495432
Ref: gnat_rm/implementation_advice rm-f-1-2-decimal-radix-support495572
Ref: 1f6495572
Node: RM G Numerics495866
Ref: gnat_rm/implementation_advice rm-g-numerics496014
Ref: 1f7496014
Node: RM G 1 1 56-58 Complex Types496528
Ref: gnat_rm/implementation_advice rm-g-1-1-56-58-complex-types496686
Ref: 1f8496686
Node: RM G 1 2 49 Complex Elementary Functions499470
Ref: gnat_rm/implementation_advice rm-g-1-2-49-complex-elementary-functions499648
Ref: 1f9499648
Node: RM G 2 4 19 Accuracy Requirements500369
Ref: gnat_rm/implementation_advice rm-g-2-4-19-accuracy-requirements500558
Ref: 1fa500558
Node: RM G 2 6 15 Complex Arithmetic Accuracy501141
Ref: gnat_rm/implementation_advice rm-g-2-6-15-complex-arithmetic-accuracy501337
Ref: 1fb501337
Node: RM H 6 15/2 Pragma Partition_Elaboration_Policy501740
Ref: gnat_rm/implementation_advice rm-h-6-15-2-pragma-partition-elaboration-policy501894
Ref: 1fc501894
Node: Implementation Defined Characteristics502268
Ref: gnat_rm/implementation_defined_characteristics implementation-defined-characteristics502407
Ref: b502407
Ref: gnat_rm/implementation_defined_characteristics doc502407
Ref: 1fd502407
Ref: gnat_rm/implementation_defined_characteristics id1502407
Ref: 1fe502407
Node: Intrinsic Subprograms546790
Ref: gnat_rm/intrinsic_subprograms doc546942
Ref: 200546942
Ref: gnat_rm/intrinsic_subprograms intrinsic-subprograms546942
Ref: c546942
Ref: gnat_rm/intrinsic_subprograms id1546942
Ref: 201546942
Node: Intrinsic Operators547896
Ref: gnat_rm/intrinsic_subprograms id2547999
Ref: 202547999
Ref: gnat_rm/intrinsic_subprograms intrinsic-operators547999
Ref: 203547999
Node: Compilation_Date548970
Ref: gnat_rm/intrinsic_subprograms compilation-date549098
Ref: 204549098
Ref: gnat_rm/intrinsic_subprograms id3549098
Ref: 205549098
Node: Compilation_Time549500
Ref: gnat_rm/intrinsic_subprograms compilation-time549625
Ref: 206549625
Ref: gnat_rm/intrinsic_subprograms id4549625
Ref: 207549625
Node: Enclosing_Entity550024
Ref: gnat_rm/intrinsic_subprograms id5550154
Ref: 208550154
Ref: gnat_rm/intrinsic_subprograms enclosing-entity550154
Ref: 209550154
Node: Exception_Information550567
Ref: gnat_rm/intrinsic_subprograms id6550698
Ref: 20a550698
Ref: gnat_rm/intrinsic_subprograms exception-information550698
Ref: 20b550698
Node: Exception_Message551120
Ref: gnat_rm/intrinsic_subprograms exception-message551249
Ref: 20c551249
Ref: gnat_rm/intrinsic_subprograms id7551249
Ref: 20d551249
Node: Exception_Name551645
Ref: gnat_rm/intrinsic_subprograms exception-name551757
Ref: 20e551757
Ref: gnat_rm/intrinsic_subprograms id8551757
Ref: 20f551757
Node: File552128
Ref: gnat_rm/intrinsic_subprograms file552227
Ref: 210552227
Ref: gnat_rm/intrinsic_subprograms id9552227
Ref: 211552227
Node: Line552551
Ref: gnat_rm/intrinsic_subprograms id10552654
Ref: 212552654
Ref: gnat_rm/intrinsic_subprograms line552654
Ref: 213552654
Node: Shifts and Rotates552987
Ref: gnat_rm/intrinsic_subprograms id11553101
Ref: 214553101
Ref: gnat_rm/intrinsic_subprograms shifts-and-rotates553101
Ref: 215553101
Node: Source_Location554065
Ref: gnat_rm/intrinsic_subprograms source-location554166
Ref: 216554166
Ref: gnat_rm/intrinsic_subprograms id12554166
Ref: 217554166
Node: Representation Clauses and Pragmas554529
Ref: gnat_rm/representation_clauses_and_pragmas representation-clauses-and-pragmas554668
Ref: d554668
Ref: gnat_rm/representation_clauses_and_pragmas doc554668
Ref: 218554668
Ref: gnat_rm/representation_clauses_and_pragmas id1554668
Ref: 219554668
Node: Alignment Clauses555854
Ref: gnat_rm/representation_clauses_and_pragmas id2555964
Ref: 21a555964
Ref: gnat_rm/representation_clauses_and_pragmas alignment-clauses555964
Ref: 21b555964
Node: Size Clauses560184
Ref: gnat_rm/representation_clauses_and_pragmas id3560323
Ref: 21c560323
Ref: gnat_rm/representation_clauses_and_pragmas size-clauses560323
Ref: 21d560323
Node: Storage_Size Clauses562957
Ref: gnat_rm/representation_clauses_and_pragmas storage-size-clauses563109
Ref: 21e563109
Ref: gnat_rm/representation_clauses_and_pragmas id4563109
Ref: 21f563109
Node: Size of Variant Record Objects565581
Ref: gnat_rm/representation_clauses_and_pragmas id5565742
Ref: 220565742
Ref: gnat_rm/representation_clauses_and_pragmas size-of-variant-record-objects565742
Ref: 221565742
Node: Biased Representation568802
Ref: gnat_rm/representation_clauses_and_pragmas id6568977
Ref: 222568977
Ref: gnat_rm/representation_clauses_and_pragmas biased-representation568977
Ref: 223568977
Node: Value_Size and Object_Size Clauses570003
Ref: gnat_rm/representation_clauses_and_pragmas id7570170
Ref: 224570170
Ref: gnat_rm/representation_clauses_and_pragmas value-size-and-object-size-clauses570170
Ref: 225570170
Node: Component_Size Clauses578349
Ref: gnat_rm/representation_clauses_and_pragmas id8578512
Ref: 226578512
Ref: gnat_rm/representation_clauses_and_pragmas component-size-clauses578512
Ref: 227578512
Node: Bit_Order Clauses580082
Ref: gnat_rm/representation_clauses_and_pragmas bit-order-clauses580247
Ref: 228580247
Ref: gnat_rm/representation_clauses_and_pragmas id9580247
Ref: 229580247
Node: Effect of Bit_Order on Byte Ordering583643
Ref: gnat_rm/representation_clauses_and_pragmas id10583808
Ref: 22a583808
Ref: gnat_rm/representation_clauses_and_pragmas effect-of-bit-order-on-byte-ordering583808
Ref: 22b583808
Node: Pragma Pack for Arrays593092
Ref: gnat_rm/representation_clauses_and_pragmas pragma-pack-for-arrays593263
Ref: 22c593263
Ref: gnat_rm/representation_clauses_and_pragmas id11593263
Ref: 22d593263
Node: Pragma Pack for Records597398
Ref: gnat_rm/representation_clauses_and_pragmas pragma-pack-for-records597562
Ref: 22e597562
Ref: gnat_rm/representation_clauses_and_pragmas id12597562
Ref: 22f597562
Node: Record Representation Clauses599876
Ref: gnat_rm/representation_clauses_and_pragmas id13600048
Ref: 230600048
Ref: gnat_rm/representation_clauses_and_pragmas record-representation-clauses600048
Ref: 231600048
Node: Handling of Records with Holes603147
Ref: gnat_rm/representation_clauses_and_pragmas handling-of-records-with-holes603315
Ref: 232603315
Ref: gnat_rm/representation_clauses_and_pragmas id14603315
Ref: 233603315
Node: Enumeration Clauses605545
Ref: gnat_rm/representation_clauses_and_pragmas enumeration-clauses605699
Ref: 234605699
Ref: gnat_rm/representation_clauses_and_pragmas id15605699
Ref: 235605699
Node: Address Clauses607118
Ref: gnat_rm/representation_clauses_and_pragmas id16607286
Ref: 236607286
Ref: gnat_rm/representation_clauses_and_pragmas address-clauses607286
Ref: 237607286
Node: Use of Address Clauses for Memory-Mapped I/O617983
Ref: gnat_rm/representation_clauses_and_pragmas id17618170
Ref: 238618170
Ref: gnat_rm/representation_clauses_and_pragmas use-of-address-clauses-for-memory-mapped-i-o618170
Ref: 239618170
Node: Effect of Convention on Representation620036
Ref: gnat_rm/representation_clauses_and_pragmas id18620246
Ref: 23a620246
Ref: gnat_rm/representation_clauses_and_pragmas effect-of-convention-on-representation620246
Ref: 23b620246
Node: Conventions and Anonymous Access Types623342
Ref: gnat_rm/representation_clauses_and_pragmas conventions-and-anonymous-access-types623554
Ref: 23c623554
Ref: gnat_rm/representation_clauses_and_pragmas id19623554
Ref: 23d623554
Node: Determining the Representations chosen by GNAT626004
Ref: gnat_rm/representation_clauses_and_pragmas id20626169
Ref: 23e626169
Ref: gnat_rm/representation_clauses_and_pragmas determining-the-representations-chosen-by-gnat626169
Ref: 23f626169
Node: Standard Library Routines630664
Ref: gnat_rm/standard_library_routines standard-library-routines630816
Ref: e630816
Ref: gnat_rm/standard_library_routines doc630816
Ref: 240630816
Ref: gnat_rm/standard_library_routines id1630816
Ref: 241630816
Node: The Implementation of Standard I/O656387
Ref: gnat_rm/the_implementation_of_standard_i_o the-implementation-of-standard-i-o656521
Ref: f656521
Ref: gnat_rm/the_implementation_of_standard_i_o doc656521
Ref: 242656521
Ref: gnat_rm/the_implementation_of_standard_i_o id1656521
Ref: 243656521
Node: Standard I/O Packages658571
Ref: gnat_rm/the_implementation_of_standard_i_o standard-i-o-packages658685
Ref: 244658685
Ref: gnat_rm/the_implementation_of_standard_i_o id2658685
Ref: 245658685
Node: FORM Strings660010
Ref: gnat_rm/the_implementation_of_standard_i_o form-strings660142
Ref: 246660142
Ref: gnat_rm/the_implementation_of_standard_i_o id3660142
Ref: 247660142
Node: Direct_IO660750
Ref: gnat_rm/the_implementation_of_standard_i_o direct-io660874
Ref: 248660874
Ref: gnat_rm/the_implementation_of_standard_i_o id4660874
Ref: 249660874
Node: Sequential_IO661639
Ref: gnat_rm/the_implementation_of_standard_i_o sequential-io661758
Ref: 24a661758
Ref: gnat_rm/the_implementation_of_standard_i_o id5661758
Ref: 24b661758
Node: Text_IO663567
Ref: gnat_rm/the_implementation_of_standard_i_o id6663689
Ref: 24c663689
Ref: gnat_rm/the_implementation_of_standard_i_o text-io663689
Ref: 24d663689
Node: Stream Pointer Positioning666080
Ref: gnat_rm/the_implementation_of_standard_i_o id7666197
Ref: 24e666197
Ref: gnat_rm/the_implementation_of_standard_i_o stream-pointer-positioning666197
Ref: 24f666197
Node: Reading and Writing Non-Regular Files667612
Ref: gnat_rm/the_implementation_of_standard_i_o reading-and-writing-non-regular-files667751
Ref: 250667751
Ref: gnat_rm/the_implementation_of_standard_i_o id8667751
Ref: 251667751
Node: Get_Immediate669473
Ref: gnat_rm/the_implementation_of_standard_i_o get-immediate669619
Ref: 252669619
Ref: gnat_rm/the_implementation_of_standard_i_o id9669619
Ref: 253669619
Node: Treating Text_IO Files as Streams670312
Ref: gnat_rm/the_implementation_of_standard_i_o id10670439
Ref: 254670439
Ref: gnat_rm/the_implementation_of_standard_i_o treating-text-io-files-as-streams670439
Ref: 255670439
Node: Text_IO Extensions670991
Ref: gnat_rm/the_implementation_of_standard_i_o id11671145
Ref: 256671145
Ref: gnat_rm/the_implementation_of_standard_i_o text-io-extensions671145
Ref: 257671145
Node: Text_IO Facilities for Unbounded Strings671758
Ref: gnat_rm/the_implementation_of_standard_i_o text-io-facilities-for-unbounded-strings671870
Ref: 258671870
Ref: gnat_rm/the_implementation_of_standard_i_o id12671870
Ref: 259671870
Node: Wide_Text_IO673384
Ref: gnat_rm/the_implementation_of_standard_i_o wide-text-io673510
Ref: 25a673510
Ref: gnat_rm/the_implementation_of_standard_i_o id13673510
Ref: 25b673510
Node: Stream Pointer Positioning<2>680138
Ref: gnat_rm/the_implementation_of_standard_i_o stream-pointer-positioning-1680266
Ref: 25c680266
Ref: gnat_rm/the_implementation_of_standard_i_o id14680266
Ref: 25d680266
Node: Reading and Writing Non-Regular Files<2>681159
Ref: gnat_rm/the_implementation_of_standard_i_o reading-and-writing-non-regular-files-1681287
Ref: 25e681287
Ref: gnat_rm/the_implementation_of_standard_i_o id15681287
Ref: 25f681287
Node: Wide_Wide_Text_IO681688
Ref: gnat_rm/the_implementation_of_standard_i_o id16681816
Ref: 260681816
Ref: gnat_rm/the_implementation_of_standard_i_o wide-wide-text-io681816
Ref: 261681816
Node: Stream Pointer Positioning<3>685197
Ref: gnat_rm/the_implementation_of_standard_i_o stream-pointer-positioning-2685330
Ref: 262685330
Ref: gnat_rm/the_implementation_of_standard_i_o id17685330
Ref: 263685330
Node: Reading and Writing Non-Regular Files<3>686255
Ref: gnat_rm/the_implementation_of_standard_i_o id18686388
Ref: 264686388
Ref: gnat_rm/the_implementation_of_standard_i_o reading-and-writing-non-regular-files-2686388
Ref: 265686388
Node: Stream_IO686789
Ref: gnat_rm/the_implementation_of_standard_i_o id19686921
Ref: 266686921
Ref: gnat_rm/the_implementation_of_standard_i_o stream-io686921
Ref: 267686921
Node: Text Translation687426
Ref: gnat_rm/the_implementation_of_standard_i_o id20687553
Ref: 268687553
Ref: gnat_rm/the_implementation_of_standard_i_o text-translation687553
Ref: 269687553
Node: Shared Files688312
Ref: gnat_rm/the_implementation_of_standard_i_o id21688448
Ref: 26a688448
Ref: gnat_rm/the_implementation_of_standard_i_o shared-files688448
Ref: 26b688448
Node: Filenames encoding691151
Ref: gnat_rm/the_implementation_of_standard_i_o filenames-encoding691292
Ref: 26c691292
Ref: gnat_rm/the_implementation_of_standard_i_o id22691292
Ref: 26d691292
Node: File content encoding692067
Ref: gnat_rm/the_implementation_of_standard_i_o file-content-encoding692206
Ref: 26e692206
Ref: gnat_rm/the_implementation_of_standard_i_o id23692206
Ref: 26f692206
Node: Open Modes692700
Ref: gnat_rm/the_implementation_of_standard_i_o open-modes692844
Ref: 270692844
Ref: gnat_rm/the_implementation_of_standard_i_o id24692844
Ref: 271692844
Node: Operations on C Streams694114
Ref: gnat_rm/the_implementation_of_standard_i_o operations-on-c-streams694261
Ref: 272694261
Ref: gnat_rm/the_implementation_of_standard_i_o id25694261
Ref: 273694261
Node: Interfacing to C Streams700913
Ref: gnat_rm/the_implementation_of_standard_i_o interfacing-to-c-streams701041
Ref: 274701041
Ref: gnat_rm/the_implementation_of_standard_i_o id26701041
Ref: 275701041
Node: The GNAT Library704274
Ref: gnat_rm/the_gnat_library the-gnat-library704413
Ref: 10704413
Ref: gnat_rm/the_gnat_library doc704413
Ref: 276704413
Ref: gnat_rm/the_gnat_library id1704413
Ref: 277704413
Node: Ada Characters Latin_9 a-chlat9 ads717417
Ref: gnat_rm/the_gnat_library id2717555
Ref: 278717555
Ref: gnat_rm/the_gnat_library ada-characters-latin-9-a-chlat9-ads717555
Ref: 279717555
Node: Ada Characters Wide_Latin_1 a-cwila1 ads717943
Ref: gnat_rm/the_gnat_library ada-characters-wide-latin-1-a-cwila1-ads718130
Ref: 27a718130
Ref: gnat_rm/the_gnat_library id3718130
Ref: 27b718130
Node: Ada Characters Wide_Latin_9 a-cwila1 ads718558
Ref: gnat_rm/the_gnat_library id4718755
Ref: 27c718755
Ref: gnat_rm/the_gnat_library ada-characters-wide-latin-9-a-cwila1-ads718755
Ref: 27d718755
Node: Ada Characters Wide_Wide_Latin_1 a-chzla1 ads719185
Ref: gnat_rm/the_gnat_library ada-characters-wide-wide-latin-1-a-chzla1-ads719387
Ref: 27e719387
Ref: gnat_rm/the_gnat_library id5719387
Ref: 27f719387
Node: Ada Characters Wide_Wide_Latin_9 a-chzla9 ads719830
Ref: gnat_rm/the_gnat_library ada-characters-wide-wide-latin-9-a-chzla9-ads720046
Ref: 280720046
Ref: gnat_rm/the_gnat_library id6720046
Ref: 281720046
Node: Ada Containers Formal_Doubly_Linked_Lists a-cfdlli ads720491
Ref: gnat_rm/the_gnat_library id7720708
Ref: 282720708
Ref: gnat_rm/the_gnat_library ada-containers-formal-doubly-linked-lists-a-cfdlli-ads720708
Ref: 283720708
Node: Ada Containers Formal_Hashed_Maps a-cfhama ads721375
Ref: gnat_rm/the_gnat_library id8721593
Ref: 284721593
Ref: gnat_rm/the_gnat_library ada-containers-formal-hashed-maps-a-cfhama-ads721593
Ref: 285721593
Node: Ada Containers Formal_Hashed_Sets a-cfhase ads722236
Ref: gnat_rm/the_gnat_library id9722447
Ref: 286722447
Ref: gnat_rm/the_gnat_library ada-containers-formal-hashed-sets-a-cfhase-ads722447
Ref: 287722447
Node: Ada Containers Formal_Ordered_Maps a-cforma ads723090
Ref: gnat_rm/the_gnat_library id10723302
Ref: 288723302
Ref: gnat_rm/the_gnat_library ada-containers-formal-ordered-maps-a-cforma-ads723302
Ref: 289723302
Node: Ada Containers Formal_Ordered_Sets a-cforse ads723948
Ref: gnat_rm/the_gnat_library ada-containers-formal-ordered-sets-a-cforse-ads724156
Ref: 28a724156
Ref: gnat_rm/the_gnat_library id11724156
Ref: 28b724156
Node: Ada Containers Formal_Vectors a-cofove ads724804
Ref: gnat_rm/the_gnat_library id12725018
Ref: 28c725018
Ref: gnat_rm/the_gnat_library ada-containers-formal-vectors-a-cofove-ads725018
Ref: 28d725018
Node: Ada Containers Formal_Indefinite_Vectors a-cfinve ads725651
Ref: gnat_rm/the_gnat_library id13725861
Ref: 28e725861
Ref: gnat_rm/the_gnat_library ada-containers-formal-indefinite-vectors-a-cfinve-ads725861
Ref: 28f725861
Node: Ada Containers Bounded_Holders a-coboho ads726539
Ref: gnat_rm/the_gnat_library id14726748
Ref: 290726748
Ref: gnat_rm/the_gnat_library ada-containers-bounded-holders-a-coboho-ads726748
Ref: 291726748
Node: Ada Command_Line Environment a-colien ads726971
Ref: gnat_rm/the_gnat_library ada-command-line-environment-a-colien-ads727163
Ref: 292727163
Ref: gnat_rm/the_gnat_library id15727163
Ref: 293727163
Node: Ada Command_Line Remove a-colire ads727403
Ref: gnat_rm/the_gnat_library id16727595
Ref: 294727595
Ref: gnat_rm/the_gnat_library ada-command-line-remove-a-colire-ads727595
Ref: 295727595
Node: Ada Command_Line Response_File a-clrefi ads727941
Ref: gnat_rm/the_gnat_library ada-command-line-response-file-a-clrefi-ads728128
Ref: 296728128
Ref: gnat_rm/the_gnat_library id17728128
Ref: 297728128
Node: Ada Direct_IO C_Streams a-diocst ads728526
Ref: gnat_rm/the_gnat_library id18728723
Ref: 298728723
Ref: gnat_rm/the_gnat_library ada-direct-io-c-streams-a-diocst-ads728723
Ref: 299728723
Node: Ada Exceptions Is_Null_Occurrence a-einuoc ads729062
Ref: gnat_rm/the_gnat_library id19729263
Ref: 29a729263
Ref: gnat_rm/the_gnat_library ada-exceptions-is-null-occurrence-a-einuoc-ads729263
Ref: 29b729263
Node: Ada Exceptions Last_Chance_Handler a-elchha ads729515
Ref: gnat_rm/the_gnat_library id20729717
Ref: 29c729717
Ref: gnat_rm/the_gnat_library ada-exceptions-last-chance-handler-a-elchha-ads729717
Ref: 29d729717
Node: Ada Exceptions Traceback a-exctra ads730038
Ref: gnat_rm/the_gnat_library ada-exceptions-traceback-a-exctra-ads730234
Ref: 29e730234
Ref: gnat_rm/the_gnat_library id21730234
Ref: 29f730234
Node: Ada Sequential_IO C_Streams a-siocst ads730467
Ref: gnat_rm/the_gnat_library ada-sequential-io-c-streams-a-siocst-ads730660
Ref: 2a0730660
Ref: gnat_rm/the_gnat_library id22730660
Ref: 2a1730660
Node: Ada Streams Stream_IO C_Streams a-ssicst ads731011
Ref: gnat_rm/the_gnat_library id23731209
Ref: 2a2731209
Ref: gnat_rm/the_gnat_library ada-streams-stream-io-c-streams-a-ssicst-ads731209
Ref: 2a3731209
Node: Ada Strings Unbounded Text_IO a-suteio ads731564
Ref: gnat_rm/the_gnat_library ada-strings-unbounded-text-io-a-suteio-ads731774
Ref: 2a4731774
Ref: gnat_rm/the_gnat_library id24731774
Ref: 2a5731774
Node: Ada Strings Wide_Unbounded Wide_Text_IO a-swuwti ads732031
Ref: gnat_rm/the_gnat_library id25732259
Ref: 2a6732259
Ref: gnat_rm/the_gnat_library ada-strings-wide-unbounded-wide-text-io-a-swuwti-ads732259
Ref: 2a7732259
Node: Ada Strings Wide_Wide_Unbounded Wide_Wide_Text_IO a-szuzti ads732546
Ref: gnat_rm/the_gnat_library ada-strings-wide-wide-unbounded-wide-wide-text-io-a-szuzti-ads732766
Ref: 2a8732766
Ref: gnat_rm/the_gnat_library id26732766
Ref: 2a9732766
Node: Ada Text_IO C_Streams a-tiocst ads733083
Ref: gnat_rm/the_gnat_library ada-text-io-c-streams-a-tiocst-ads733296
Ref: 2aa733296
Ref: gnat_rm/the_gnat_library id27733296
Ref: 2ab733296
Node: Ada Text_IO Reset_Standard_Files a-tirsfi ads733629
Ref: gnat_rm/the_gnat_library id28733820
Ref: 2ac733820
Ref: gnat_rm/the_gnat_library ada-text-io-reset-standard-files-a-tirsfi-ads733820
Ref: 2ad733820
Node: Ada Wide_Characters Unicode a-wichun ads734232
Ref: gnat_rm/the_gnat_library id29734428
Ref: 2ae734428
Ref: gnat_rm/the_gnat_library ada-wide-characters-unicode-a-wichun-ads734428
Ref: 2af734428
Node: Ada Wide_Text_IO C_Streams a-wtcstr ads734654
Ref: gnat_rm/the_gnat_library ada-wide-text-io-c-streams-a-wtcstr-ads734855
Ref: 2b0734855
Ref: gnat_rm/the_gnat_library id30734855
Ref: 2b1734855
Node: Ada Wide_Text_IO Reset_Standard_Files a-wrstfi ads735203
Ref: gnat_rm/the_gnat_library ada-wide-text-io-reset-standard-files-a-wrstfi-ads735409
Ref: 2b2735409
Ref: gnat_rm/the_gnat_library id31735409
Ref: 2b3735409
Node: Ada Wide_Wide_Characters Unicode a-zchuni ads735836
Ref: gnat_rm/the_gnat_library id32736047
Ref: 2b4736047
Ref: gnat_rm/the_gnat_library ada-wide-wide-characters-unicode-a-zchuni-ads736047
Ref: 2b5736047
Node: Ada Wide_Wide_Text_IO C_Streams a-ztcstr ads736288
Ref: gnat_rm/the_gnat_library id33736504
Ref: 2b6736504
Ref: gnat_rm/the_gnat_library ada-wide-wide-text-io-c-streams-a-ztcstr-ads736504
Ref: 2b7736504
Node: Ada Wide_Wide_Text_IO Reset_Standard_Files a-zrstfi ads736867
Ref: gnat_rm/the_gnat_library id34737063
Ref: 2b8737063
Ref: gnat_rm/the_gnat_library ada-wide-wide-text-io-reset-standard-files-a-zrstfi-ads737063
Ref: 2b9737063
Node: GNAT Altivec g-altive ads737504
Ref: gnat_rm/the_gnat_library gnat-altivec-g-altive-ads737693
Ref: 2ba737693
Ref: gnat_rm/the_gnat_library id35737693
Ref: 2bb737693
Node: GNAT Altivec Conversions g-altcon ads737915
Ref: gnat_rm/the_gnat_library id36738092
Ref: 2bc738092
Ref: gnat_rm/the_gnat_library gnat-altivec-conversions-g-altcon-ads738092
Ref: 2bd738092
Node: GNAT Altivec Vector_Operations g-alveop ads738253
Ref: gnat_rm/the_gnat_library id37738443
Ref: 2be738443
Ref: gnat_rm/the_gnat_library gnat-altivec-vector-operations-g-alveop-ads738443
Ref: 2bf738443
Node: GNAT Altivec Vector_Types g-alvety ads738792
Ref: gnat_rm/the_gnat_library gnat-altivec-vector-types-g-alvety-ads738983
Ref: 2c0738983
Ref: gnat_rm/the_gnat_library id38738983
Ref: 2c1738983
Node: GNAT Altivec Vector_Views g-alvevi ads739180
Ref: gnat_rm/the_gnat_library gnat-altivec-vector-views-g-alvevi-ads739357
Ref: 2c2739357
Ref: gnat_rm/the_gnat_library id39739357
Ref: 2c3739357
Node: GNAT Array_Split g-arrspl ads739716
Ref: gnat_rm/the_gnat_library gnat-array-split-g-arrspl-ads739873
Ref: 2c4739873
Ref: gnat_rm/the_gnat_library id40739873
Ref: 2c5739873
Node: GNAT AWK g-awk ads740120
Ref: gnat_rm/the_gnat_library id41740272
Ref: 2c6740272
Ref: gnat_rm/the_gnat_library gnat-awk-g-awk-ads740272
Ref: 2c7740272
Node: GNAT Bounded_Buffers g-boubuf ads740559
Ref: gnat_rm/the_gnat_library gnat-bounded-buffers-g-boubuf-ads740717
Ref: 2c8740717
Ref: gnat_rm/the_gnat_library id42740717
Ref: 2c9740717
Node: GNAT Bounded_Mailboxes g-boumai ads740977
Ref: gnat_rm/the_gnat_library gnat-bounded-mailboxes-g-boumai-ads741146
Ref: 2ca741146
Ref: gnat_rm/the_gnat_library id43741146
Ref: 2cb741146
Node: GNAT Bubble_Sort g-bubsor ads741322
Ref: gnat_rm/the_gnat_library gnat-bubble-sort-g-bubsor-ads741489
Ref: 2cc741489
Ref: gnat_rm/the_gnat_library id44741489
Ref: 2cd741489
Node: GNAT Bubble_Sort_A g-busora ads741753
Ref: gnat_rm/the_gnat_library id45741916
Ref: 2ce741916
Ref: gnat_rm/the_gnat_library gnat-bubble-sort-a-g-busora-ads741916
Ref: 2cf741916
Node: GNAT Bubble_Sort_G g-busorg ads742281
Ref: gnat_rm/the_gnat_library id46742448
Ref: 2d0742448
Ref: gnat_rm/the_gnat_library gnat-bubble-sort-g-g-busorg-ads742448
Ref: 2d1742448
Node: GNAT Byte_Order_Mark g-byorma ads742780
Ref: gnat_rm/the_gnat_library id47742947
Ref: 2d2742947
Ref: gnat_rm/the_gnat_library gnat-byte-order-mark-g-byorma-ads742947
Ref: 2d3742947
Node: GNAT Byte_Swapping g-bytswa ads743306
Ref: gnat_rm/the_gnat_library gnat-byte-swapping-g-bytswa-ads743468
Ref: 2d4743468
Ref: gnat_rm/the_gnat_library id48743468
Ref: 2d5743468
Node: GNAT Calendar g-calend ads743695
Ref: gnat_rm/the_gnat_library gnat-calendar-g-calend-ads743858
Ref: 2d6743858
Ref: gnat_rm/the_gnat_library id49743858
Ref: 2d7743858
Node: GNAT Calendar Time_IO g-catiio ads744166
Ref: gnat_rm/the_gnat_library gnat-calendar-time-io-g-catiio-ads744320
Ref: 2d8744320
Ref: gnat_rm/the_gnat_library id50744320
Ref: 2d9744320
Node: GNAT CRC32 g-crc32 ads744415
Ref: gnat_rm/the_gnat_library id51744570
Ref: 2da744570
Ref: gnat_rm/the_gnat_library gnat-crc32-g-crc32-ads744570
Ref: 2db744570
Node: GNAT Case_Util g-casuti ads744880
Ref: gnat_rm/the_gnat_library gnat-case-util-g-casuti-ads745019
Ref: 2dc745019
Ref: gnat_rm/the_gnat_library id52745019
Ref: 2dd745019
Node: GNAT CGI g-cgi ads745250
Ref: gnat_rm/the_gnat_library id53745395
Ref: 2de745395
Ref: gnat_rm/the_gnat_library gnat-cgi-g-cgi-ads745395
Ref: 2df745395
Node: GNAT CGI Cookie g-cgicoo ads745770
Ref: gnat_rm/the_gnat_library id54745915
Ref: 2e0745915
Ref: gnat_rm/the_gnat_library gnat-cgi-cookie-g-cgicoo-ads745915
Ref: 2e1745915
Node: GNAT CGI Debug g-cgideb ads746205
Ref: gnat_rm/the_gnat_library gnat-cgi-debug-g-cgideb-ads746362
Ref: 2e2746362
Ref: gnat_rm/the_gnat_library id55746362
Ref: 2e3746362
Node: GNAT Command_Line g-comlin ads746536
Ref: gnat_rm/the_gnat_library id56746699
Ref: 2e4746699
Ref: gnat_rm/the_gnat_library gnat-command-line-g-comlin-ads746699
Ref: 2e5746699
Node: GNAT Compiler_Version g-comver ads746976
Ref: gnat_rm/the_gnat_library gnat-compiler-version-g-comver-ads747136
Ref: 2e6747136
Ref: gnat_rm/the_gnat_library id57747136
Ref: 2e7747136
Node: GNAT Ctrl_C g-ctrl_c ads747531
Ref: gnat_rm/the_gnat_library id58747696
Ref: 2e8747696
Ref: gnat_rm/the_gnat_library gnat-ctrl-c-g-ctrl-c-ads747696
Ref: 2e9747696
Node: GNAT Current_Exception g-curexc ads747834
Ref: gnat_rm/the_gnat_library id59747994
Ref: 2ea747994
Ref: gnat_rm/the_gnat_library gnat-current-exception-g-curexc-ads747994
Ref: 2eb747994
Node: GNAT Debug_Pools g-debpoo ads748402
Ref: gnat_rm/the_gnat_library gnat-debug-pools-g-debpoo-ads748571
Ref: 2ec748571
Ref: gnat_rm/the_gnat_library id60748571
Ref: 2ed748571
Node: GNAT Debug_Utilities g-debuti ads748811
Ref: gnat_rm/the_gnat_library gnat-debug-utilities-g-debuti-ads748976
Ref: 2ee748976
Ref: gnat_rm/the_gnat_library id61748976
Ref: 2ef748976
Node: GNAT Decode_String g-decstr ads749250
Ref: gnat_rm/the_gnat_library gnat-decode-string-g-decstr-ads749422
Ref: 2f0749422
Ref: gnat_rm/the_gnat_library id62749422
Ref: 2f1749422
Node: GNAT Decode_UTF8_String g-deutst ads749920
Ref: gnat_rm/the_gnat_library gnat-decode-utf8-string-g-deutst-ads750097
Ref: 2f2750097
Ref: gnat_rm/the_gnat_library id63750097
Ref: 2f3750097
Node: GNAT Directory_Operations g-dirope ads750259
Ref: gnat_rm/the_gnat_library id64750453
Ref: 2f4750453
Ref: gnat_rm/the_gnat_library gnat-directory-operations-g-dirope-ads750453
Ref: 2f5750453
Node: GNAT Directory_Operations Iteration g-diopit ads750719
Ref: gnat_rm/the_gnat_library id65750910
Ref: 2f6750910
Ref: gnat_rm/the_gnat_library gnat-directory-operations-iteration-g-diopit-ads750910
Ref: 2f7750910
Node: GNAT Dynamic_HTables g-dynhta ads751143
Ref: gnat_rm/the_gnat_library gnat-dynamic-htables-g-dynhta-ads751328
Ref: 2f8751328
Ref: gnat_rm/the_gnat_library id66751328
Ref: 2f9751328
Node: GNAT Dynamic_Tables g-dyntab ads751893
Ref: gnat_rm/the_gnat_library gnat-dynamic-tables-g-dyntab-ads752061
Ref: 2fa752061
Ref: gnat_rm/the_gnat_library id67752061
Ref: 2fb752061
Node: GNAT Encode_String g-encstr ads752528
Ref: gnat_rm/the_gnat_library id68752699
Ref: 2fc752699
Ref: gnat_rm/the_gnat_library gnat-encode-string-g-encstr-ads752699
Ref: 2fd752699
Node: GNAT Encode_UTF8_String g-enutst ads753068
Ref: gnat_rm/the_gnat_library gnat-encode-utf8-string-g-enutst-ads753242
Ref: 2fe753242
Ref: gnat_rm/the_gnat_library id69753242
Ref: 2ff753242
Node: GNAT Exception_Actions g-excact ads753404
Ref: gnat_rm/the_gnat_library id70753581
Ref: 300753581
Ref: gnat_rm/the_gnat_library gnat-exception-actions-g-excact-ads753581
Ref: 301753581
Node: GNAT Exception_Traces g-exctra ads753883
Ref: gnat_rm/the_gnat_library gnat-exception-traces-g-exctra-ads754052
Ref: 302754052
Ref: gnat_rm/the_gnat_library id71754052
Ref: 303754052
Node: GNAT Exceptions g-expect ads754235
Ref: gnat_rm/the_gnat_library id72754393
Ref: 304754393
Ref: gnat_rm/the_gnat_library gnat-exceptions-g-expect-ads754393
Ref: 305754393
Node: GNAT Expect g-expect ads754865
Ref: gnat_rm/the_gnat_library id73755017
Ref: 306755017
Ref: gnat_rm/the_gnat_library gnat-expect-g-expect-ads755017
Ref: 307755017
Node: GNAT Expect TTY g-exptty ads755536
Ref: gnat_rm/the_gnat_library id74755691
Ref: 308755691
Ref: gnat_rm/the_gnat_library gnat-expect-tty-g-exptty-ads755691
Ref: 309755691
Node: GNAT Float_Control g-flocon ads755986
Ref: gnat_rm/the_gnat_library id75756151
Ref: 30a756151
Ref: gnat_rm/the_gnat_library gnat-float-control-g-flocon-ads756151
Ref: 30b756151
Node: GNAT Formatted_String g-forstr ads756522
Ref: gnat_rm/the_gnat_library id76756686
Ref: 30c756686
Ref: gnat_rm/the_gnat_library gnat-formatted-string-g-forstr-ads756686
Ref: 30d756686
Node: GNAT Heap_Sort g-heasor ads757068
Ref: gnat_rm/the_gnat_library gnat-heap-sort-g-heasor-ads757230
Ref: 30e757230
Ref: gnat_rm/the_gnat_library id77757230
Ref: 30f757230
Node: GNAT Heap_Sort_A g-hesora ads757599
Ref: gnat_rm/the_gnat_library id78757756
Ref: 310757756
Ref: gnat_rm/the_gnat_library gnat-heap-sort-a-g-hesora-ads757756
Ref: 311757756
Node: GNAT Heap_Sort_G g-hesorg ads758236
Ref: gnat_rm/the_gnat_library id79758390
Ref: 312758390
Ref: gnat_rm/the_gnat_library gnat-heap-sort-g-g-hesorg-ads758390
Ref: 313758390
Node: GNAT HTable g-htable ads758716
Ref: gnat_rm/the_gnat_library id80758857
Ref: 314758857
Ref: gnat_rm/the_gnat_library gnat-htable-g-htable-ads758857
Ref: 315758857
Node: GNAT IO g-io ads759124
Ref: gnat_rm/the_gnat_library id81759260
Ref: 316759260
Ref: gnat_rm/the_gnat_library gnat-io-g-io-ads759260
Ref: 317759260
Node: GNAT IO_Aux g-io_aux ads759561
Ref: gnat_rm/the_gnat_library id82759701
Ref: 318759701
Ref: gnat_rm/the_gnat_library gnat-io-aux-g-io-aux-ads759701
Ref: 319759701
Node: GNAT Lock_Files g-locfil ads759919
Ref: gnat_rm/the_gnat_library id83760081
Ref: 31a760081
Ref: gnat_rm/the_gnat_library gnat-lock-files-g-locfil-ads760081
Ref: 31b760081
Node: GNAT MBBS_Discrete_Random g-mbdira ads760278
Ref: gnat_rm/the_gnat_library gnat-mbbs-discrete-random-g-mbdira-ads760451
Ref: 31c760451
Ref: gnat_rm/the_gnat_library id84760451
Ref: 31d760451
Node: GNAT MBBS_Float_Random g-mbflra ads760676
Ref: gnat_rm/the_gnat_library id85760839
Ref: 31e760839
Ref: gnat_rm/the_gnat_library gnat-mbbs-float-random-g-mbflra-ads760839
Ref: 31f760839
Node: GNAT MD5 g-md5 ads761055
Ref: gnat_rm/the_gnat_library id86761209
Ref: 320761209
Ref: gnat_rm/the_gnat_library gnat-md5-g-md5-ads761209
Ref: 321761209
Node: GNAT Memory_Dump g-memdum ads761435
Ref: gnat_rm/the_gnat_library id87761593
Ref: 322761593
Ref: gnat_rm/the_gnat_library gnat-memory-dump-g-memdum-ads761593
Ref: 323761593
Node: GNAT Most_Recent_Exception g-moreex ads761819
Ref: gnat_rm/the_gnat_library id88761983
Ref: 324761983
Ref: gnat_rm/the_gnat_library gnat-most-recent-exception-g-moreex-ads761983
Ref: 325761983
Node: GNAT OS_Lib g-os_lib ads762275
Ref: gnat_rm/the_gnat_library id89762451
Ref: 326762451
Ref: gnat_rm/the_gnat_library gnat-os-lib-g-os-lib-ads762451
Ref: 327762451
Node: GNAT Perfect_Hash_Generators g-pehage ads762774
Ref: gnat_rm/the_gnat_library id90762943
Ref: 328762943
Ref: gnat_rm/the_gnat_library gnat-perfect-hash-generators-g-pehage-ads762943
Ref: 329762943
Node: GNAT Random_Numbers g-rannum ads763580
Ref: gnat_rm/the_gnat_library id91763749
Ref: 32a763749
Ref: gnat_rm/the_gnat_library gnat-random-numbers-g-rannum-ads763749
Ref: 32b763749
Node: GNAT Regexp g-regexp ads763966
Ref: gnat_rm/the_gnat_library gnat-regexp-g-regexp-ads764120
Ref: 1ff764120
Ref: gnat_rm/the_gnat_library id92764120
Ref: 32c764120
Node: GNAT Registry g-regist ads764464
Ref: gnat_rm/the_gnat_library id93764610
Ref: 32d764610
Ref: gnat_rm/the_gnat_library gnat-registry-g-regist-ads764610
Ref: 32e764610
Node: GNAT Regpat g-regpat ads764956
Ref: gnat_rm/the_gnat_library id94765108
Ref: 32f765108
Ref: gnat_rm/the_gnat_library gnat-regpat-g-regpat-ads765108
Ref: 330765108
Node: GNAT Rewrite_Data g-rewdat ads765389
Ref: gnat_rm/the_gnat_library id95765553
Ref: 331765553
Ref: gnat_rm/the_gnat_library gnat-rewrite-data-g-rewdat-ads765553
Ref: 332765553
Node: GNAT Secondary_Stack_Info g-sestin ads765908
Ref: gnat_rm/the_gnat_library gnat-secondary-stack-info-g-sestin-ads766076
Ref: 333766076
Ref: gnat_rm/the_gnat_library id96766076
Ref: 334766076
Node: GNAT Semaphores g-semaph ads766271
Ref: gnat_rm/the_gnat_library gnat-semaphores-g-semaph-ads766448
Ref: 335766448
Ref: gnat_rm/the_gnat_library id97766448
Ref: 336766448
Node: GNAT Serial_Communications g-sercom ads766603
Ref: gnat_rm/the_gnat_library id98766762
Ref: 337766762
Ref: gnat_rm/the_gnat_library gnat-serial-communications-g-sercom-ads766762
Ref: 338766762
Node: GNAT SHA1 g-sha1 ads766990
Ref: gnat_rm/the_gnat_library gnat-sha1-g-sha1-ads767145
Ref: 339767145
Ref: gnat_rm/the_gnat_library id99767145
Ref: 33a767145
Node: GNAT SHA224 g-sha224 ads767394
Ref: gnat_rm/the_gnat_library id100767534
Ref: 33b767534
Ref: gnat_rm/the_gnat_library gnat-sha224-g-sha224-ads767534
Ref: 33c767534
Node: GNAT SHA256 g-sha256 ads767782
Ref: gnat_rm/the_gnat_library id101767926
Ref: 33d767926
Ref: gnat_rm/the_gnat_library gnat-sha256-g-sha256-ads767926
Ref: 33e767926
Node: GNAT SHA384 g-sha384 ads768176
Ref: gnat_rm/the_gnat_library id102768320
Ref: 33f768320
Ref: gnat_rm/the_gnat_library gnat-sha384-g-sha384-ads768320
Ref: 340768320
Node: GNAT SHA512 g-sha512 ads768570
Ref: gnat_rm/the_gnat_library id103768715
Ref: 341768715
Ref: gnat_rm/the_gnat_library gnat-sha512-g-sha512-ads768715
Ref: 342768715
Node: GNAT Signals g-signal ads768965
Ref: gnat_rm/the_gnat_library gnat-signals-g-signal-ads769111
Ref: 343769111
Ref: gnat_rm/the_gnat_library id104769111
Ref: 344769111
Node: GNAT Sockets g-socket ads769278
Ref: gnat_rm/the_gnat_library gnat-sockets-g-socket-ads769429
Ref: 345769429
Ref: gnat_rm/the_gnat_library id105769429
Ref: 346769429
Node: GNAT Source_Info g-souinf ads769808
Ref: gnat_rm/the_gnat_library gnat-source-info-g-souinf-ads769968
Ref: 347769968
Ref: gnat_rm/the_gnat_library id106769968
Ref: 348769968
Node: GNAT Spelling_Checker g-speche ads770317
Ref: gnat_rm/the_gnat_library gnat-spelling-checker-g-speche-ads770494
Ref: 349770494
Ref: gnat_rm/the_gnat_library id107770494
Ref: 34a770494
Node: GNAT Spelling_Checker_Generic g-spchge ads770698
Ref: gnat_rm/the_gnat_library gnat-spelling-checker-generic-g-spchge-ads770880
Ref: 34b770880
Ref: gnat_rm/the_gnat_library id108770880
Ref: 34c770880
Node: GNAT Spitbol Patterns g-spipat ads771152
Ref: gnat_rm/the_gnat_library id109771325
Ref: 34d771325
Ref: gnat_rm/the_gnat_library gnat-spitbol-patterns-g-spipat-ads771325
Ref: 34e771325
Node: GNAT Spitbol g-spitbo ads771724
Ref: gnat_rm/the_gnat_library id110771894
Ref: 34f771894
Ref: gnat_rm/the_gnat_library gnat-spitbol-g-spitbo-ads771894
Ref: 350771894
Node: GNAT Spitbol Table_Boolean g-sptabo ads772296
Ref: gnat_rm/the_gnat_library id111772471
Ref: 351772471
Ref: gnat_rm/the_gnat_library gnat-spitbol-table-boolean-g-sptabo-ads772471
Ref: 352772471
Node: GNAT Spitbol Table_Integer g-sptain ads772725
Ref: gnat_rm/the_gnat_library id112772914
Ref: 353772914
Ref: gnat_rm/the_gnat_library gnat-spitbol-table-integer-g-sptain-ads772914
Ref: 354772914
Node: GNAT Spitbol Table_VString g-sptavs ads773181
Ref: gnat_rm/the_gnat_library id113773349
Ref: 355773349
Ref: gnat_rm/the_gnat_library gnat-spitbol-table-vstring-g-sptavs-ads773349
Ref: 356773349
Node: GNAT SSE g-sse ads773624
Ref: gnat_rm/the_gnat_library id114773787
Ref: 357773787
Ref: gnat_rm/the_gnat_library gnat-sse-g-sse-ads773787
Ref: 358773787
Node: GNAT SSE Vector_Types g-ssvety ads774106
Ref: gnat_rm/the_gnat_library gnat-sse-vector-types-g-ssvety-ads774255
Ref: 359774255
Ref: gnat_rm/the_gnat_library id115774255
Ref: 35a774255
Node: GNAT Strings g-string ads774407
Ref: gnat_rm/the_gnat_library id116774568
Ref: 35b774568
Ref: gnat_rm/the_gnat_library gnat-strings-g-string-ads774568
Ref: 35c774568
Node: GNAT String_Split g-strspl ads774774
Ref: gnat_rm/the_gnat_library gnat-string-split-g-strspl-ads774923
Ref: 35d774923
Ref: gnat_rm/the_gnat_library id117774923
Ref: 35e774923
Node: GNAT Table g-table ads775229
Ref: gnat_rm/the_gnat_library id118775380
Ref: 35f775380
Ref: gnat_rm/the_gnat_library gnat-table-g-table-ads775380
Ref: 360775380
Node: GNAT Task_Lock g-tasloc ads775847
Ref: gnat_rm/the_gnat_library gnat-task-lock-g-tasloc-ads775996
Ref: 361775996
Ref: gnat_rm/the_gnat_library id119775996
Ref: 362775996
Node: GNAT Time_Stamp g-timsta ads776270
Ref: gnat_rm/the_gnat_library gnat-time-stamp-g-timsta-ads776422
Ref: 363776422
Ref: gnat_rm/the_gnat_library id120776422
Ref: 364776422
Node: GNAT Threads g-thread ads776739
Ref: gnat_rm/the_gnat_library gnat-threads-g-thread-ads776891
Ref: 365776891
Ref: gnat_rm/the_gnat_library id121776891
Ref: 366776891
Node: GNAT Traceback g-traceb ads777238
Ref: gnat_rm/the_gnat_library id122777398
Ref: 367777398
Ref: gnat_rm/the_gnat_library gnat-traceback-g-traceb-ads777398
Ref: 368777398
Node: GNAT Traceback Symbolic g-trasym ads777592
Ref: gnat_rm/the_gnat_library gnat-traceback-symbolic-g-trasym-ads777750
Ref: 369777750
Ref: gnat_rm/the_gnat_library id123777750
Ref: 36a777750
Node: GNAT UTF_32 g-table ads777851
Ref: gnat_rm/the_gnat_library id124778021
Ref: 36b778021
Ref: gnat_rm/the_gnat_library gnat-utf-32-g-table-ads778021
Ref: 36c778021
Node: GNAT Wide_Spelling_Checker g-u3spch ads778562
Ref: gnat_rm/the_gnat_library gnat-wide-spelling-checker-g-u3spch-ads778735
Ref: 36d778735
Ref: gnat_rm/the_gnat_library id125778735
Ref: 36e778735
Node: GNAT Wide_Spelling_Checker g-wispch ads779059
Ref: gnat_rm/the_gnat_library gnat-wide-spelling-checker-g-wispch-ads779244
Ref: 36f779244
Ref: gnat_rm/the_gnat_library id126779244
Ref: 370779244
Node: GNAT Wide_String_Split g-wistsp ads779468
Ref: gnat_rm/the_gnat_library id127779658
Ref: 371779658
Ref: gnat_rm/the_gnat_library gnat-wide-string-split-g-wistsp-ads779658
Ref: 372779658
Node: GNAT Wide_Wide_Spelling_Checker g-zspche ads779984
Ref: gnat_rm/the_gnat_library gnat-wide-wide-spelling-checker-g-zspche-ads780175
Ref: 373780175
Ref: gnat_rm/the_gnat_library id128780175
Ref: 374780175
Node: GNAT Wide_Wide_String_Split g-zistsp ads780419
Ref: gnat_rm/the_gnat_library gnat-wide-wide-string-split-g-zistsp-ads780611
Ref: 375780611
Ref: gnat_rm/the_gnat_library id129780611
Ref: 376780611
Node: Interfaces C Extensions i-cexten ads780957
Ref: gnat_rm/the_gnat_library id130781138
Ref: 377781138
Ref: gnat_rm/the_gnat_library interfaces-c-extensions-i-cexten-ads781138
Ref: 378781138
Node: Interfaces C Streams i-cstrea ads781386
Ref: gnat_rm/the_gnat_library id131781565
Ref: 379781565
Ref: gnat_rm/the_gnat_library interfaces-c-streams-i-cstrea-ads781565
Ref: 37a781565
Node: Interfaces Packed_Decimal i-pacdec ads781739
Ref: gnat_rm/the_gnat_library interfaces-packed-decimal-i-pacdec-ads781913
Ref: 37b781913
Ref: gnat_rm/the_gnat_library id132781913
Ref: 37c781913
Node: Interfaces VxWorks i-vxwork ads782156
Ref: gnat_rm/the_gnat_library id133782331
Ref: 37d782331
Ref: gnat_rm/the_gnat_library interfaces-vxworks-i-vxwork-ads782331
Ref: 37e782331
Node: Interfaces VxWorks IO i-vxwoio ads782561
Ref: gnat_rm/the_gnat_library interfaces-vxworks-io-i-vxwoio-ads782731
Ref: 37f782731
Ref: gnat_rm/the_gnat_library id134782731
Ref: 380782731
Node: System Address_Image s-addima ads783046
Ref: gnat_rm/the_gnat_library system-address-image-s-addima-ads783215
Ref: 381783215
Ref: gnat_rm/the_gnat_library id135783215
Ref: 382783215
Node: System Assertions s-assert ads783439
Ref: gnat_rm/the_gnat_library system-assertions-s-assert-ads783609
Ref: 383783609
Ref: gnat_rm/the_gnat_library id136783609
Ref: 384783609
Node: System Atomic_Counters s-atocou ads783867
Ref: gnat_rm/the_gnat_library id137784030
Ref: 385784030
Ref: gnat_rm/the_gnat_library system-atomic-counters-s-atocou-ads784030
Ref: 386784030
Node: System Memory s-memory ads784453
Ref: gnat_rm/the_gnat_library system-memory-s-memory-ads784621
Ref: 387784621
Ref: gnat_rm/the_gnat_library id138784621
Ref: 388784621
Node: System Multiprocessors s-multip ads785216
Ref: gnat_rm/the_gnat_library id139785404
Ref: 389785404
Ref: gnat_rm/the_gnat_library system-multiprocessors-s-multip-ads785404
Ref: 38a785404
Node: System Multiprocessors Dispatching_Domains s-mudido ads785694
Ref: gnat_rm/the_gnat_library system-multiprocessors-dispatching-domains-s-mudido-ads785895
Ref: 38b785895
Ref: gnat_rm/the_gnat_library id140785895
Ref: 38c785895
Node: System Partition_Interface s-parint ads786225
Ref: gnat_rm/the_gnat_library id141786422
Ref: 38d786422
Ref: gnat_rm/the_gnat_library system-partition-interface-s-parint-ads786422
Ref: 38e786422
Node: System Pool_Global s-pooglo ads786671
Ref: gnat_rm/the_gnat_library id142786843
Ref: 38f786843
Ref: gnat_rm/the_gnat_library system-pool-global-s-pooglo-ads786843
Ref: 390786843
Node: System Pool_Local s-pooloc ads787176
Ref: gnat_rm/the_gnat_library system-pool-local-s-pooloc-ads787341
Ref: 391787341
Ref: gnat_rm/the_gnat_library id143787341
Ref: 392787341
Node: System Restrictions s-restri ads787707
Ref: gnat_rm/the_gnat_library id144787867
Ref: 393787867
Ref: gnat_rm/the_gnat_library system-restrictions-s-restri-ads787867
Ref: 394787867
Node: System Rident s-rident ads788296
Ref: gnat_rm/the_gnat_library id145788464
Ref: 395788464
Ref: gnat_rm/the_gnat_library system-rident-s-rident-ads788464
Ref: 396788464
Node: System Strings Stream_Ops s-ststop ads788851
Ref: gnat_rm/the_gnat_library id146789021
Ref: 397789021
Ref: gnat_rm/the_gnat_library system-strings-stream-ops-s-ststop-ads789021
Ref: 398789021
Node: System Unsigned_Types s-unstyp ads789408
Ref: gnat_rm/the_gnat_library system-unsigned-types-s-unstyp-ads789579
Ref: 399789579
Ref: gnat_rm/the_gnat_library id147789579
Ref: 39a789579
Node: System Wch_Cnv s-wchcnv ads790006
Ref: gnat_rm/the_gnat_library system-wch-cnv-s-wchcnv-ads790166
Ref: 39b790166
Ref: gnat_rm/the_gnat_library id148790166
Ref: 39c790166
Node: System Wch_Con s-wchcon ads790492
Ref: gnat_rm/the_gnat_library system-wch-con-s-wchcon-ads790609
Ref: 39d790609
Ref: gnat_rm/the_gnat_library id149790609
Ref: 39e790609
Node: Interfacing to Other Languages790883
Ref: gnat_rm/interfacing_to_other_languages interfacing-to-other-languages791013
Ref: 11791013
Ref: gnat_rm/interfacing_to_other_languages doc791013
Ref: 39f791013
Ref: gnat_rm/interfacing_to_other_languages id1791013
Ref: 3a0791013
Node: Interfacing to C791365
Ref: gnat_rm/interfacing_to_other_languages interfacing-to-c791476
Ref: 3a1791476
Ref: gnat_rm/interfacing_to_other_languages id2791476
Ref: 3a2791476
Node: Interfacing to C++793507
Ref: gnat_rm/interfacing_to_other_languages id4793647
Ref: 3a3793647
Ref: gnat_rm/interfacing_to_other_languages id3793647
Ref: 3f793647
Node: Interfacing to COBOL795796
Ref: gnat_rm/interfacing_to_other_languages id5795942
Ref: 3a4795942
Ref: gnat_rm/interfacing_to_other_languages interfacing-to-cobol795942
Ref: 3a5795942
Node: Interfacing to Fortran796086
Ref: gnat_rm/interfacing_to_other_languages id6796246
Ref: 3a6796246
Ref: gnat_rm/interfacing_to_other_languages interfacing-to-fortran796246
Ref: 3a7796246
Node: Interfacing to non-GNAT Ada code796568
Ref: gnat_rm/interfacing_to_other_languages interfacing-to-non-gnat-ada-code796699
Ref: 3a8796699
Ref: gnat_rm/interfacing_to_other_languages id7796699
Ref: 3a9796699
Node: Specialized Needs Annexes797714
Ref: gnat_rm/specialized_needs_annexes specialized-needs-annexes797867
Ref: 12797867
Ref: gnat_rm/specialized_needs_annexes doc797867
Ref: 3aa797867
Ref: gnat_rm/specialized_needs_annexes id1797867
Ref: 3ab797867
Node: Implementation of Specific Ada Features798932
Ref: gnat_rm/implementation_of_specific_ada_features implementation-of-specific-ada-features799090
Ref: 13799090
Ref: gnat_rm/implementation_of_specific_ada_features doc799090
Ref: 3ac799090
Ref: gnat_rm/implementation_of_specific_ada_features id1799090
Ref: 3ad799090
Node: Machine Code Insertions799542
Ref: gnat_rm/implementation_of_specific_ada_features machine-code-insertions799681
Ref: 11a799681
Ref: gnat_rm/implementation_of_specific_ada_features id2799681
Ref: 3ae799681
Node: GNAT Implementation of Tasking806943
Ref: gnat_rm/implementation_of_specific_ada_features id3807137
Ref: 3af807137
Ref: gnat_rm/implementation_of_specific_ada_features gnat-implementation-of-tasking807137
Ref: 3b0807137
Node: Mapping Ada Tasks onto the Underlying Kernel Threads807518
Ref: gnat_rm/implementation_of_specific_ada_features mapping-ada-tasks-onto-the-underlying-kernel-threads807691
Ref: 3b1807691
Ref: gnat_rm/implementation_of_specific_ada_features id4807691
Ref: 3b2807691
Node: Ensuring Compliance with the Real-Time Annex809872
Ref: gnat_rm/implementation_of_specific_ada_features id5810045
Ref: 3b3810045
Ref: gnat_rm/implementation_of_specific_ada_features ensuring-compliance-with-the-real-time-annex810045
Ref: 3b4810045
Node: GNAT Implementation of Shared Passive Packages811953
Ref: gnat_rm/implementation_of_specific_ada_features id6812160
Ref: 3b5812160
Ref: gnat_rm/implementation_of_specific_ada_features gnat-implementation-of-shared-passive-packages812160
Ref: 3b6812160
Node: Code Generation for Array Aggregates815368
Ref: gnat_rm/implementation_of_specific_ada_features code-generation-for-array-aggregates815605
Ref: 3b7815605
Ref: gnat_rm/implementation_of_specific_ada_features id7815605
Ref: 3b8815605
Node: Static constant aggregates with static bounds817029
Ref: gnat_rm/implementation_of_specific_ada_features static-constant-aggregates-with-static-bounds817209
Ref: 3b9817209
Ref: gnat_rm/implementation_of_specific_ada_features id8817209
Ref: 3ba817209
Node: Constant aggregates with unconstrained nominal types818600
Ref: gnat_rm/implementation_of_specific_ada_features constant-aggregates-with-unconstrained-nominal-types818818
Ref: 3bb818818
Ref: gnat_rm/implementation_of_specific_ada_features id9818818
Ref: 3bc818818
Node: Aggregates with static bounds819312
Ref: gnat_rm/implementation_of_specific_ada_features id10819518
Ref: 3bd819518
Ref: gnat_rm/implementation_of_specific_ada_features aggregates-with-static-bounds819518
Ref: 3be819518
Node: Aggregates with non-static bounds820143
Ref: gnat_rm/implementation_of_specific_ada_features aggregates-with-non-static-bounds820332
Ref: 3bf820332
Ref: gnat_rm/implementation_of_specific_ada_features id11820332
Ref: 3c0820332
Node: Aggregates in assignment statements820743
Ref: gnat_rm/implementation_of_specific_ada_features id12820894
Ref: 3c1820894
Ref: gnat_rm/implementation_of_specific_ada_features aggregates-in-assignment-statements820894
Ref: 3c2820894
Node: The Size of Discriminated Records with Default Discriminants822149
Ref: gnat_rm/implementation_of_specific_ada_features id13822386
Ref: 3c3822386
Ref: gnat_rm/implementation_of_specific_ada_features the-size-of-discriminated-records-with-default-discriminants822386
Ref: 3c4822386
Node: Strict Conformance to the Ada Reference Manual825273
Ref: gnat_rm/implementation_of_specific_ada_features strict-conformance-to-the-ada-reference-manual825465
Ref: 3c5825465
Ref: gnat_rm/implementation_of_specific_ada_features id14825465
Ref: 3c6825465
Node: Implementation of Ada 2012 Features827024
Ref: gnat_rm/implementation_of_ada_2012_features doc827177
Ref: 3c7827177
Ref: gnat_rm/implementation_of_ada_2012_features implementation-of-ada-2012-features827177
Ref: 14827177
Ref: gnat_rm/implementation_of_ada_2012_features id1827177
Ref: 3c8827177
Node: Obsolescent Features874265
Ref: gnat_rm/obsolescent_features id1874410
Ref: 3c9874410
Ref: gnat_rm/obsolescent_features doc874410
Ref: 3ca874410
Ref: gnat_rm/obsolescent_features obsolescent-features874410
Ref: 15874410
Node: pragma No_Run_Time874873
Ref: gnat_rm/obsolescent_features id2874974
Ref: 3cb874974
Ref: gnat_rm/obsolescent_features pragma-no-run-time874974
Ref: 3cc874974
Node: pragma Ravenscar875496
Ref: gnat_rm/obsolescent_features id3875632
Ref: 3cd875632
Ref: gnat_rm/obsolescent_features pragma-ravenscar875632
Ref: 3ce875632
Node: pragma Restricted_Run_Time875839
Ref: gnat_rm/obsolescent_features pragma-restricted-run-time875973
Ref: 3cf875973
Ref: gnat_rm/obsolescent_features id4875973
Ref: 3d0875973
Node: pragma Task_Info876264
Ref: gnat_rm/obsolescent_features pragma-task-info876419
Ref: 3d1876419
Ref: gnat_rm/obsolescent_features id5876419
Ref: 3d2876419
Node: package System Task_Info s-tasinf ads877259
Ref: gnat_rm/obsolescent_features package-system-task-info877379
Ref: 3d3877379
Ref: gnat_rm/obsolescent_features package-system-task-info-s-tasinf-ads877379
Ref: 3d4877379
Node: Compatibility and Porting Guide877722
Ref: gnat_rm/compatibility_and_porting_guide compatibility-and-porting-guide877862
Ref: 16877862
Ref: gnat_rm/compatibility_and_porting_guide doc877862
Ref: 3d5877862
Ref: gnat_rm/compatibility_and_porting_guide id1877862
Ref: 3d6877862
Node: Writing Portable Fixed-Point Declarations878501
Ref: gnat_rm/compatibility_and_porting_guide id2878645
Ref: 3d7878645
Ref: gnat_rm/compatibility_and_porting_guide writing-portable-fixed-point-declarations878645
Ref: 3d8878645
Node: Compatibility with Ada 83882480
Ref: gnat_rm/compatibility_and_porting_guide compatibility-with-ada-83882674
Ref: 3d9882674
Ref: gnat_rm/compatibility_and_porting_guide id3882674
Ref: 3da882674
Node: Legal Ada 83 programs that are illegal in Ada 95883544
Ref: gnat_rm/compatibility_and_porting_guide id4883692
Ref: 3db883692
Ref: gnat_rm/compatibility_and_porting_guide legal-ada-83-programs-that-are-illegal-in-ada-95883692
Ref: 3dc883692
Node: More deterministic semantics888163
Ref: gnat_rm/compatibility_and_porting_guide more-deterministic-semantics888337
Ref: 3dd888337
Ref: gnat_rm/compatibility_and_porting_guide id5888337
Ref: 3de888337
Node: Changed semantics889264
Ref: gnat_rm/compatibility_and_porting_guide id6889425
Ref: 3df889425
Ref: gnat_rm/compatibility_and_porting_guide changed-semantics889425
Ref: 3e0889425
Node: Other language compatibility issues890983
Ref: gnat_rm/compatibility_and_porting_guide other-language-compatibility-issues891107
Ref: 3e1891107
Ref: gnat_rm/compatibility_and_porting_guide id7891107
Ref: 3e2891107
Node: Compatibility between Ada 95 and Ada 2005892379
Ref: gnat_rm/compatibility_and_porting_guide compatibility-between-ada-95-and-ada-2005892572
Ref: 3e3892572
Ref: gnat_rm/compatibility_and_porting_guide id8892572
Ref: 3e4892572
Node: Implementation-dependent characteristics894912
Ref: gnat_rm/compatibility_and_porting_guide implementation-dependent-characteristics895116
Ref: 3e5895116
Ref: gnat_rm/compatibility_and_porting_guide id9895116
Ref: 3e6895116
Node: Implementation-defined pragmas895903
Ref: gnat_rm/compatibility_and_porting_guide implementation-defined-pragmas896053
Ref: 3e7896053
Ref: gnat_rm/compatibility_and_porting_guide id10896053
Ref: 3e8896053
Node: Implementation-defined attributes897018
Ref: gnat_rm/compatibility_and_porting_guide id11897186
Ref: 3e9897186
Ref: gnat_rm/compatibility_and_porting_guide implementation-defined-attributes897186
Ref: 3ea897186
Node: Libraries897753
Ref: gnat_rm/compatibility_and_porting_guide libraries897908
Ref: 3eb897908
Ref: gnat_rm/compatibility_and_porting_guide id12897908
Ref: 3ec897908
Node: Elaboration order898813
Ref: gnat_rm/compatibility_and_porting_guide elaboration-order898958
Ref: 3ed898958
Ref: gnat_rm/compatibility_and_porting_guide id13898958
Ref: 3ee898958
Node: Target-specific aspects900368
Ref: gnat_rm/compatibility_and_porting_guide target-specific-aspects900495
Ref: 3ef900495
Ref: gnat_rm/compatibility_and_porting_guide id14900495
Ref: 3f0900495
Node: Compatibility with Other Ada Systems901255
Ref: gnat_rm/compatibility_and_porting_guide id15901440
Ref: 3f2901440
Ref: gnat_rm/compatibility_and_porting_guide compatibility-with-other-ada-systems901440
Ref: 3f3901440
Node: Representation Clauses902981
Ref: gnat_rm/compatibility_and_porting_guide representation-clauses903154
Ref: 3f1903154
Ref: gnat_rm/compatibility_and_porting_guide id16903154
Ref: 3f4903154
Node: Compatibility with HP Ada 83907770
Ref: gnat_rm/compatibility_and_porting_guide compatibility-with-hp-ada-83907898
Ref: 3f5907898
Ref: gnat_rm/compatibility_and_porting_guide id17907898
Ref: 3f6907898
Node: GNU Free Documentation License908776
Ref: share/gnu_free_documentation_license gnu-fdl908901
Ref: 1908901
Ref: share/gnu_free_documentation_license doc908901
Ref: 3f7908901
Ref: share/gnu_free_documentation_license gnu-free-documentation-license908901
Ref: 3f8908901
Node: Index932023

End Tag Table
