# GNAT User's Guide

Next: About This Guide, Previous: (dir), Up: (dir)

## GNAT User's Guide

GNAT User's Guide

GNAT, The GNU Ada Compiler
GCC version 4.8.0

AdaCore

--- The Detailed Node Listing ---

About This Guide

Getting Started with GNAT

The GNAT Compilation Model

Foreign Language Representation

Compiling Ada Programs With gcc

Switches for gcc

Binding Ada Programs With gnatbind

Switches for gnatbind

Linking Using gnatlink

The GNAT Make Program gnatmake

Improving Performance

Performance Considerations

Reducing Size of Ada Executables with gnatelim

Reducing Size of Executables with unused subprogram/data elimination

Renaming Files Using gnatchop

Configuration Pragmas

Handling Arbitrary File Naming Conventions Using gnatname

The Cross-Referencing Tools gnatxref and gnatfind

The GNAT Pretty-Printer gnatpp

The GNAT Metrics Tool gnatmetric

File Name Krunching Using gnatkr

Preprocessing Using gnatprep

The GNAT Library Browser gnatls

Cleaning Up Using gnatclean

GNAT and Libraries

Using the GNU make Utility

Memory Management Issues

Stack Related Facilities

Some Useful Memory Pools

The GNAT Debug Pool Facility

The gnatmem Tool

Verifying Properties Using gnatcheck

Sample Bodies Using gnatstub

Creating Unit Tests Using gnattest

Other Utility Programs

Code Coverage and Profiling

Running and Debugging Ada Programs

Platform-Specific Information for the Run-Time Libraries

Example of Binder Output File

Elaboration Order Handling in GNAT

Overflow Check Handling in GNAT

Conditional Compilation

Inline Assembler

Compatibility and Porting Guide

Microsoft Windows Topics

Mac OS Topics

Next: Getting Started with GNAT, Previous: Top, Up: Top

## About This Guide

This guide describes the use of GNAT, a compiler and software development toolset for the full Ada programming language. It documents the features of the compiler and tools, and explains how to use them to build Ada applications.

GNAT implements Ada 95 and Ada 2005, and it may also be invoked in Ada 83 compatibility mode. By default, GNAT assumes Ada 2005, but you can override with a compiler switch (see Compiling Different Versions of Ada) to explicitly specify the language version. Throughout this manual, references to “Ada” without a year suffix apply to both the Ada 95 and Ada 2005 versions of the language.

Next: What You Should Know before Reading This Guide, Up: About This Guide

### What This Guide Contains

This guide contains the following chapters:

- Getting Started with GNAT, describes how to get started compiling and running Ada programs with the GNAT Ada programming environment.
- The GNAT Compilation Model, describes the compilation model used by GNAT.
- Compiling Using gcc, describes how to compile Ada programs with `gcc`, the Ada compiler.
- Binding Using gnatbind, describes how to perform binding of Ada programs with `gnatbind`, the GNAT binding utility.
- Linking Using gnatlink, describes `gnatlink`, a program that provides for linking using the GNAT run-time library to construct a program. `gnatlink` can also incorporate foreign language object units into the executable.
- The GNAT Make Program gnatmake, describes `gnatmake`, a utility that automatically determines the set of sources needed by an Ada compilation unit, and executes the necessary compilations binding and link.
- Improving Performance, shows various techniques for making your Ada program run faster or take less space. It discusses the effect of the compiler's optimization switch and also describes the `gnatelim` tool and unused subprogram/data elimination.
- Renaming Files Using gnatchop, describes `gnatchop`, a utility that allows you to preprocess a file that contains Ada source code, and split it into one or more new files, one for each compilation unit.
- Configuration Pragmas, describes the configuration pragmas handled by GNAT.
- Handling Arbitrary File Naming Conventions Using gnatname, shows how to override the default GNAT file naming conventions, either for an individual unit or globally.
- GNAT Project Manager, describes how to use project files to organize large projects.
- The Cross-Referencing Tools gnatxref and gnatfind, discusses `gnatxref` and `gnatfind`, two tools that provide an easy way to navigate through sources.
- The GNAT Pretty-Printer gnatpp, shows how to produce a reformatted version of an Ada source file with control over casing, indentation, comment placement, and other elements of program presentation style.
- The GNAT Metric Tool gnatmetric, shows how to compute various metrics for an Ada source file, such as the number of types and subprograms, and assorted complexity measures.
- File Name Krunching Using gnatkr, describes the `gnatkr` file name krunching utility, used to handle shortened file names on operating systems with a limit on the length of names.
- Preprocessing Using gnatprep, describes `gnatprep`, a preprocessor utility that allows a single source file to be used to generate multiple or parameterized source files by means of macro substitution.
- The GNAT Library Browser gnatls, describes `gnatls`, a utility that displays information about compiled units, including dependences on the corresponding sources files, and consistency of compilations.
- Cleaning Up Using gnatclean, describes `gnatclean`, a utility to delete files that are produced by the compiler, binder and linker.
- GNAT and Libraries, describes the process of creating and using Libraries with GNAT. It also describes how to recompile the GNAT run-time library.
- Using the GNU make Utility, describes some techniques for using the GNAT toolset in Makefiles.
- Memory Management Issues, describes some useful predefined storage pools and in particular the GNAT Debug Pool facility, which helps detect incorrect memory references. It also describes `gnatmem`, a utility that monitors dynamic allocation and deallocation and helps detect “memory leaks”.
- Stack Related Facilities, describes some useful tools associated with stack checking and analysis.
- Verifying Properties Using gnatcheck, discusses `gnatcheck`, a utility that checks Ada code against a set of rules.
- Creating Sample Bodies Using gnatstub, discusses `gnatstub`, a utility that generates empty but compilable bodies for library units.
- Creating Unit Tests Using gnattest, discusses `gnattest`, a utility that generates unit testing templates for library units.
- Performing Dimensionality Analysis in GNAT, describes the Ada 2012 facilities used in GNAT to declare dimensioned objects, and to verify that uses of these objects are consistent with their given physical dimensions (so that meters cannot be assigned to kilograms, and so on).
- Generating Ada Bindings for C and C++ headers, describes how to generate automatically Ada bindings from C and C++ headers.
- Other Utility Programs, discusses several other GNAT utilities, including `gnathtml`.
- Code Coverage and Profiling, describes how to perform a structural coverage and profile the execution of Ada programs.
- Running and Debugging Ada Programs, describes how to run and debug Ada programs.
- Platform-Specific Information for the Run-Time Libraries, describes the various run-time libraries supported by GNAT on various platforms and explains how to choose a particular library.
- Example of Binder Output File, shows the source code for the binder output file for a sample program.
- Elaboration Order Handling in GNAT, describes how GNAT helps you deal with elaboration order issues.
- Overflow Check Handling in GNAT, describes how GNAT helps you deal with arithmetic overflow issues.
- Conditional Compilation, describes how to model conditional compilation, both with Ada in general and with GNAT facilities in particular.
- Inline Assembler, shows how to use the inline assembly facility in an Ada program.
- Compatibility and Porting Guide, contains sections on compatibility of GNAT with other Ada development environments (including Ada 83 systems), to assist in porting code from those environments.
- Microsoft Windows Topics, presents information relevant to the Microsoft Windows platform.
- Mac OS Topics, presents information relevant to Apple's OS X platform.

Next: Related Information, Previous: What This Guide Contains, Up: About This Guide

### What You Should Know before Reading This Guide

This guide assumes a basic familiarity with the Ada 95 language, as described in the International Standard ANSI/ISO/IEC-8652:1995, January 1995. It does not require knowledge of the new features introduced by Ada 2005, (officially known as ISO/IEC 8652:1995 with Technical Corrigendum 1 and Amendment 1). Both reference manuals are included in the GNAT documentation package.

Next: Conventions, Previous: What You Should Know before Reading This Guide, Up: About This Guide

### Related Information

For further information about related tools, refer to the following documents:

- See GNAT Reference Manual, which contains all reference material for the GNAT implementation of Ada.
- Using the GNAT Programming Studio, which describes the GPS Integrated Development Environment.
- GNAT Programming Studio Tutorial, which introduces the main GPS features through examples.
- Ada 95 Reference Manual, which contains reference material for the Ada 95 programming language.
- Ada 2005 Reference Manual, which contains reference material for the Ada 2005 programming language.
- See Debugging with GDB, for all details on the use of the GNU source-level debugger.
- See The extensible self-documenting text editor, for full information on the extensible editor and programming environment Emacs.

Previous: Related Information, Up: About This Guide

### Conventions

Following are examples of the typographical and graphic conventions used in this guide:

- `Functions`, `utility program names`, `standard names`, and `classes`.
- `Option flags`
- `File names`, ‘`button names`’, and ‘`field names`’.
- `Variables`, `environment variables`, and metasyntactic variables.
- Emphasis.
- [optional information or parameters]
- Examples are described by text

                and then shown this way.

Commands that are entered by the user are preceded in this manual by the characters “`$` ” (dollar sign followed by space). If your system uses this sequence as a prompt, then the commands will appear exactly as you see them in the manual. If your system uses some other prompt, then the command will appear with the `$` replaced by whatever prompt character you are using.

Full file names are shown with the “`/`” character as the directory separator; e.g., `parent-dir/subdir/myfile.adb`. If you are using GNAT on a Windows platform, please note that the “`\`” character should be used instead.

Next: The GNAT Compilation Model, Previous: About This Guide, Up: Top

## 1 Getting Started with GNAT

This chapter describes some simple ways of using GNAT to build executable Ada programs. Running GNAT, through Using the gnatmake Utility, show how to use the command line environment. Introduction to GPS, provides a brief introduction to the GNAT Programming Studio, a visually-oriented Integrated Development Environment for GNAT. GPS offers a graphical “look and feel”, support for development in other programming languages, comprehensive browsing features, and many other capabilities. For information on GPS please refer to Using the GNAT Programming Studio.

Next: Running a Simple Ada Program, Up: Getting Started with GNAT

### 1.1 Running GNAT

Three steps are needed to create an executable file from an Ada source file:

1. The source file(s) must be compiled.
2. The file(s) must be bound using the GNAT binder.
3. All appropriate object files must be linked to produce an executable.

All three steps are most commonly handled by using the `gnatmake` utility program that, given the name of the main program, automatically performs the necessary compilation, binding and linking steps.

Next: Running a Program with Multiple Units, Previous: Running GNAT, Up: Getting Started with GNAT

### 1.2 Running a Simple Ada Program

Any text editor may be used to prepare an Ada program. (If `Emacs` is used, the optional Ada mode may be helpful in laying out the program.) The program text is a normal text file. We will assume in our initial example that you have used your editor to prepare the following standard format text file:

         with Ada.Text_IO; use Ada.Text_IO;
         procedure Hello is
         begin
            Put_Line ("Hello WORLD!");
         end Hello;

This file should be named `hello.adb`. With the normal default file naming conventions, GNAT requires that each file contain a single compilation unit whose file name is the unit name, with periods replaced by hyphens; the extension is `ads` for a spec and `adb` for a body. You can override this default file naming convention by use of the special pragma `Source_File_Name` (see Using Other File Names). Alternatively, if you want to rename your files according to this default convention, which is probably more convenient if you will be using GNAT for all your compilations, then the `gnatchop` utility can be used to generate correctly-named source files (see Renaming Files Using gnatchop).

You can compile the program using the following command (`$` is used as the command prompt in the examples in this document):

         $ gcc -c hello.adb

`gcc` is the command used to run the compiler. This compiler is capable of compiling programs in several languages, including Ada and C. It assumes that you have given it an Ada program if the file extension is either `.ads` or `.adb`, and it will then call the GNAT compiler to compile the specified file.

The `-c` switch is required. It tells `gcc` to only do a compilation. (For C programs, `gcc` can also do linking, but this capability is not used directly for Ada programs, so the `-c` switch must always be present.)

This compile command generates a file `hello.o`, which is the object file corresponding to your Ada program. It also generates an “Ada Library Information” file `hello.ali`, which contains additional information used to check that an Ada program is consistent. To build an executable file, use `gnatbind` to bind the program and `gnatlink` to link it. The argument to both `gnatbind` and `gnatlink` is the name of the `ALI` file, but the default extension of `.ali` can be omitted. This means that in the most common case, the argument is simply the name of the main program:

         $ gnatbind hello
         $ gnatlink hello

A simpler method of carrying out these steps is to use `gnatmake`, a master program that invokes all the required compilation, binding and linking tools in the correct order. In particular, `gnatmake` automatically recompiles any sources that have been modified since they were last compiled, or sources that depend on such modified sources, so that “version skew” is avoided.

         $ gnatmake hello.adb

The result is an executable program called `hello`, which can be run by entering:

         $ hello

assuming that the current directory is on the search path for executable programs.

and, if all has gone well, you will see

         Hello WORLD!

appear in response to this command.

Next: Using the gnatmake Utility, Previous: Running a Simple Ada Program, Up: Getting Started with GNAT

### 1.3 Running a Program with Multiple Units

Consider a slightly more complicated example that has three files: a main program, and the spec and body of a package:

         package Greetings is
            procedure Hello;
            procedure Goodbye;
         end Greetings;

         with Ada.Text_IO; use Ada.Text_IO;
         package body Greetings is
            procedure Hello is
            begin
               Put_Line ("Hello WORLD!");
            end Hello;

            procedure Goodbye is
            begin
               Put_Line ("Goodbye WORLD!");
            end Goodbye;
         end Greetings;

         with Greetings;
         procedure Gmain is
         begin
            Greetings.Hello;
            Greetings.Goodbye;
         end Gmain;

Following the one-unit-per-file rule, place this program in the following three separate files:

`greetings.ads`
  spec of package `Greetings`
`greetings.adb`
  body of package `Greetings`
`gmain.adb`
  body of main program

To build an executable version of this program, we could use four separate steps to compile, bind, and link the program, as follows:

         $ gcc -c gmain.adb
         $ gcc -c greetings.adb
         $ gnatbind gmain
         $ gnatlink gmain

Note that there is no required order of compilation when using GNAT. In particular it is perfectly fine to compile the main program first. Also, it is not necessary to compile package specs in the case where there is an accompanying body; you only need to compile the body. If you want to submit these files to the compiler for semantic checking and not code generation, then use the `-gnatc` switch:

         $ gcc -c greetings.ads -gnatc

Although the compilation can be done in separate steps as in the above example, in practice it is almost always more convenient to use the `gnatmake` tool. All you need to know in this case is the name of the main program's source file. The effect of the above four commands can be achieved with a single one:

         $ gnatmake gmain.adb

In the next section we discuss the advantages of using `gnatmake` in more detail.

Next: Introduction to GPS, Previous: Running a Program with Multiple Units, Up: Getting Started with GNAT

### 1.4 Using the `gnatmake` Utility

If you work on a program by compiling single components at a time using `gcc`, you typically keep track of the units you modify. In order to build a consistent system, you compile not only these units, but also any units that depend on the units you have modified. For example, in the preceding case, if you edit `gmain.adb`, you only need to recompile that file. But if you edit `greetings.ads`, you must recompile both `greetings.adb` and `gmain.adb`, because both files contain units that depend on `greetings.ads`.

`gnatbind` will warn you if you forget one of these compilation steps, so that it is impossible to generate an inconsistent program as a result of forgetting to do a compilation. Nevertheless it is tedious and error-prone to keep track of dependencies among units. One approach to handle the dependency-bookkeeping is to use a makefile. However, makefiles present maintenance problems of their own: if the dependencies change as you change the program, you must make sure that the makefile is kept up-to-date manually, which is also an error-prone process.

The `gnatmake` utility takes care of these details automatically. Invoke it using either one of the following forms:

         $ gnatmake gmain.adb
         $ gnatmake gmain

The argument is the name of the file containing the main program; you may omit the extension. `gnatmake` examines the environment, automatically recompiles any files that need recompiling, and binds and links the resulting set of object files, generating the executable file, `gmain`. In a large program, it can be extremely helpful to use `gnatmake`, because working out by hand what needs to be recompiled can be difficult.

Note that `gnatmake` takes into account all the Ada rules that establish dependencies among units. These include dependencies that result from inlining subprogram bodies, and from generic instantiation. Unlike some other Ada make tools, `gnatmake` does not rely on the dependencies that were found by the compiler on a previous compilation, which may possibly be wrong when sources change. `gnatmake` determines the exact set of dependencies from scratch each time it is run.

Previous: Using the gnatmake Utility, Up: Getting Started with GNAT

### 1.5 Introduction to GPS

Although the command line interface (`gnatmake`, etc.) alone is sufficient, a graphical Interactive Development Environment can make it easier for you to compose, navigate, and debug programs. This section describes the main features of GPS (“GNAT Programming Studio”), the GNAT graphical IDE. You will see how to use GPS to build and debug an executable, and you will also learn some of the basics of the GNAT “project” facility.

GPS enables you to do much more than is presented here; e.g., you can produce a call graph, interface to a third-party Version Control System, and inspect the generated assembly language for a program. Indeed, GPS also supports languages other than Ada. Such additional information, and an explanation of all of the GPS menu items. may be found in the on-line help, which includes a user's guide and a tutorial (these are also accessible from the GNAT startup menu).

Next: Simple Debugging with GPS, Up: Introduction to GPS

#### 1.5.1 Building a New Program with GPS

GPS invokes the GNAT compilation tools using information contained in a project (also known as a project file): a collection of properties such as source directories, identities of main subprograms, tool switches, etc., and their associated values. See GNAT Project Manager for details. In order to run GPS, you will need to either create a new project or else open an existing one.

This section will explain how you can use GPS to create a project, to associate Ada source files with a project, and to build and run programs.

1. Creating a project

   Invoke GPS, either from the command line or the platform's IDE. After it starts, GPS will display a “Welcome” screen with three radio buttons:

   - `Start with default project in directory`
   - `Create new project with wizard`
   - `Open existing project`

   Select `Create new project with wizard` and press `OK`. A new window will appear. In the text box labeled with `Enter the name of the project to create`, type `sample` as the project name. In the next box, browse to choose the directory in which you would like to create the project file. After selecting an appropriate directory, press `Forward`.

   A window will appear with the title `Version Control System Configuration`. Simply press `Forward`.

   A window will appear with the title `Please select the source directories for this project`. The directory that you specified for the project file will be selected by default as the one to use for sources; simply press `Forward`.

   A window will appear with the title `Please select the build directory for this project`. The directory that you specified for the project file will be selected by default for object files and executables; simply press `Forward`.

   A window will appear with the title `Please select the main units for this project`. You will supply this information later, after creating the source file. Simply press `Forward` for now.

   A window will appear with the title `Please select the switches to build the project`. Press `Apply`. This will create a project file named `sample.prj` in the directory that you had specified.

2. Creating and saving the source file

   After you create the new project, a GPS window will appear, which is partitioned into two main sections:

   - A Workspace area, initially greyed out, which you will use for creating and editing source files
   - Directly below, a Messages area, which initially displays a “Welcome” message. (If the Messages area is not visible, drag its border upward to expand it.)

   Select `File` on the menu bar, and then the `New` command. The Workspace area will become white, and you can now enter the source program explicitly. Type the following text

                 with Ada.Text_IO; use Ada.Text_IO;
                 procedure Hello is
                 begin
                   Put_Line("Hello from GPS!");
                 end Hello;

   Select `File`, then `Save As`, and enter the source file name `hello.adb`. The file will be saved in the same directory you specified as the location of the default project file.

3. Updating the project file

   You need to add the new source file to the project. To do this, select the `Project` menu and then `Edit project properties`. Click the `Main files` tab on the left, and then the `Add` button. Choose `hello.adb` from the list, and press `Open`. The project settings window will reflect this action. Click `OK`.

4. Building and running the program

   In the main GPS window, now choose the `Build` menu, then `Make`, and select `hello.adb`. The Messages window will display the resulting invocations of `gcc`, `gnatbind`, and `gnatlink` (reflecting the default switch settings from the project file that you created) and then a “successful compilation/build” message.

   To run the program, choose the `Build` menu, then `Run`, and select `hello`. An Arguments Selection window will appear. There are no command line arguments, so just click `OK`.

   The Messages window will now display the program's output (the string `Hello from GPS`), and at the bottom of the GPS window a status update is displayed (`Run: hello`). Close the GPS window (or select `File`, then `Exit`) to terminate this GPS session.

Previous: Building a New Program with GPS, Up: Introduction to GPS

#### 1.5.2 Simple Debugging with GPS

This section illustrates basic debugging techniques (setting breakpoints, examining/modifying variables, single stepping).

1. Opening a project

   Start GPS and select `Open existing project`; browse to specify the project file `sample.prj` that you had created in the earlier example.

2. Creating a source file

   Select `File`, then `New`, and type in the following program:

                 with Ada.Text_IO; use Ada.Text_IO;
                 procedure Example is
                    Line : String (1..80);
                    N    : Natural;
                 begin
                    Put_Line("Type a line of text at each prompt; an empty line to exit");
                    loop
                       Put(": ");
                       Get_Line (Line, N);
                       Put_Line (Line (1..N) );
                       exit when N=0;
                    end loop;
                 end Example;

   Select `File`, then `Save as`, and enter the file name `example.adb`.

3. Updating the project file

   Add `Example` as a new main unit for the project:

   1. Select `Project`, then `Edit Project Properties`.
   2. Select the `Main files` tab, click `Add`, then select the file `example.adb` from the list, and click `Open`. You will see the file name appear in the list of main units
   3. Click `OK`
4. Building/running the executable

   To build the executable select `Build`, then `Make`, and then choose `example.adb`.

   Run the program to see its effect (in the Messages area). Each line that you enter is displayed; an empty line will cause the loop to exit and the program to terminate.

5. Debugging the program

   Note that the `-g` switches to `gcc` and `gnatlink`, which are required for debugging, are on by default when you create a new project. Thus unless you intentionally remove these settings, you will be able to debug any program that you develop using GPS.

   1. Initializing

      Select `Debug`, then `Initialize`, then `example`

   2. Setting a breakpoint

      After performing the initialization step, you will observe a small icon to the right of each line number. This serves as a toggle for breakpoints; clicking the icon will set a breakpoint at the corresponding line (the icon will change to a red circle with an “x”), and clicking it again will remove the breakpoint / reset the icon.

      For purposes of this example, set a breakpoint at line 10 (the statement `Put_Line (Line (1..N));`

   3. Starting program execution

      Select `Debug`, then `Run`. When the `Program Arguments` window appears, click `OK`. A console window will appear; enter some line of text, e.g. `abcde`, at the prompt. The program will pause execution when it gets to the breakpoint, and the corresponding line is highlighted.

   4. Examining a variable

      Move the mouse over one of the occurrences of the variable `N`. You will see the value (5) displayed, in “tool tip” fashion. Right click on `N`, select `Debug`, then select `Display N`. You will see information about `N` appear in the `Debugger Data` pane, showing the value as 5.

   5. Assigning a new value to a variable

      Right click on the `N` in the `Debugger Data` pane, and select `Set value of N`. When the input window appears, enter the value `4` and click `OK`. This value does not automatically appear in the `Debugger Data` pane; to see it, right click again on the `N` in the `Debugger Data` pane and select `Update value`. The new value, 4, will appear in red.

   6. Single stepping

      Select `Debug`, then `Next`. This will cause the next statement to be executed, in this case the call of `Put_Line` with the string slice. Notice in the console window that the displayed string is simply `abcd` and not `abcde` which you had entered. This is because the upper bound of the slice is now 4 rather than 5.

   7. Removing a breakpoint

      Toggle the breakpoint icon at line 10.

   8. Resuming execution from a breakpoint

      Select `Debug`, then `Continue`. The program will reach the next iteration of the loop, and wait for input after displaying the prompt. This time, just hit the `Enter` key. The value of `N` will be 0, and the program will terminate. The console window will disappear.

Next: Compiling Using gcc, Previous: Getting Started with GNAT, Up: Top

## 2 The GNAT Compilation Model

This chapter describes the compilation model used by GNAT. Although similar to that used by other languages, such as C and C++, this model is substantially different from the traditional Ada compilation models, which are based on a library. The model is initially described without reference to the library-based model. If you have not previously used an Ada compiler, you need only read the first part of this chapter. The last section describes and discusses the differences between the GNAT model and the traditional Ada compiler models. If you have used other Ada compilers, this section will help you to understand those differences, and the advantages of the GNAT model.

Next: Foreign Language Representation, Up: The GNAT Compilation Model

### 2.1 Source Representation

Ada source programs are represented in standard text files, using Latin-1 coding. Latin-1 is an 8-bit code that includes the familiar 7-bit ASCII set, plus additional characters used for representing foreign languages (see Foreign Language Representation for support of non-USA character sets). The format effector characters are represented using their standard ASCII encodings, as follows:

`VT`
  Vertical tab, `16#0B#`
`HT`
  Horizontal tab, `16#09#`
`CR`
  Carriage return, `16#0D#`
`LF`
  Line feed, `16#0A#`
`FF`
  Form feed, `16#0C#`

Source files are in standard text file format. In addition, GNAT will recognize a wide variety of stream formats, in which the end of physical lines is marked by any of the following sequences: `LF`, `CR`, `CR-LF`, or `LF-CR`. This is useful in accommodating files that are imported from other operating systems.

The end of a source file is normally represented by the physical end of file. However, the control character `16#1A#` (`SUB`) is also recognized as signalling the end of the source file. Again, this is provided for compatibility with other operating systems where this code is used to represent the end of file.

Each file contains a single Ada compilation unit, including any pragmas associated with the unit. For example, this means you must place a package declaration (a package spec) and the corresponding body in separate files. An Ada compilation (which is a sequence of compilation units) is represented using a sequence of files. Similarly, you will place each subunit or child unit in a separate file.

Next: File Naming Rules, Previous: Source Representation, Up: The GNAT Compilation Model

### 2.2 Foreign Language Representation

GNAT supports the standard character sets defined in Ada as well as several other non-standard character sets for use in localized versions of the compiler (see Character Set Control).

Next: Other 8-Bit Codes, Up: Foreign Language Representation

#### 2.2.1 Latin-1

The basic character set is Latin-1. This character set is defined by ISO standard 8859, part 1. The lower half (character codes `16#00#` ... `16#7F#)` is identical to standard ASCII coding, but the upper half is used to represent additional characters. These include extended letters used by European languages, such as French accents, the vowels with umlauts used in German, and the extra letter A-ring used in Swedish.

For a complete list of Latin-1 codes and their encodings, see the source file of library unit `Ada.Characters.Latin_1` in file `a-chlat1.ads`. You may use any of these extended characters freely in character or string literals. In addition, the extended characters that represent letters can be used in identifiers.

Next: Wide Character Encodings, Previous: Latin-1, Up: Foreign Language Representation

#### 2.2.2 Other 8-Bit Codes

GNAT also supports several other 8-bit coding schemes:

ISO 8859-2 (Latin-2)
  Latin-2 letters allowed in identifiers, with uppercase and lowercase equivalence.
ISO 8859-3 (Latin-3)
  Latin-3 letters allowed in identifiers, with uppercase and lowercase equivalence.
ISO 8859-4 (Latin-4)
  Latin-4 letters allowed in identifiers, with uppercase and lowercase equivalence.
ISO 8859-5 (Cyrillic)
  ISO 8859-5 letters (Cyrillic) allowed in identifiers, with uppercase and lowercase equivalence.
ISO 8859-15 (Latin-9)
  ISO 8859-15 (Latin-9) letters allowed in identifiers, with uppercase and lowercase equivalence
IBM PC (code page 437)
  This code page is the normal default for PCs in the U.S. It corresponds to the original IBM PC character set. This set has some, but not all, of the extended Latin-1 letters, but these letters do not have the same encoding as Latin-1. In this mode, these letters are allowed in identifiers with uppercase and lowercase equivalence.
IBM PC (code page 850)
  This code page is a modification of 437 extended to include all the Latin-1 letters, but still not with the usual Latin-1 encoding. In this mode, all these letters are allowed in identifiers with uppercase and lowercase equivalence.
Full Upper 8-bit
  Any character in the range 80-FF allowed in identifiers, and all are considered distinct. In other words, there are no uppercase and lowercase equivalences in this range. This is useful in conjunction with certain encoding schemes used for some foreign character sets (e.g., the typical method of representing Chinese characters on the PC).
No Upper-Half
  No upper-half characters in the range 80-FF are allowed in identifiers. This gives Ada 83 compatibility for identifier names.

For precise data on the encodings permitted, and the uppercase and lowercase equivalences that are recognized, see the file `csets.adb` in the GNAT compiler sources. You will need to obtain a full source release of GNAT to obtain this file.

Previous: Other 8-Bit Codes, Up: Foreign Language Representation

#### 2.2.3 Wide Character Encodings

GNAT allows wide character codes to appear in character and string literals, and also optionally in identifiers, by means of the following possible encoding schemes:

Hex Coding
  In this encoding, a wide character is represented by the following five character sequence:

                ESC a b c d

  Where `a`, `b`, `c`, `d` are the four hexadecimal characters (using uppercase letters) of the wide character code. For example, ESC A345 is used to represent the wide character with code `16#A345#`. This scheme is compatible with use of the full Wide_Character set.

Upper-Half Coding
  The wide character with encoding `16#abcd#` where the upper bit is on (in other words, “a” is in the range 8-F) is represented as two bytes, `16#ab#` and `16#cd#`. The second byte cannot be a format control character, but is not required to be in the upper half. This method can be also used for shift-JIS or EUC, where the internal coding matches the external coding.
Shift JIS Coding
  A wide character is represented by a two-character sequence, `16#ab#` and `16#cd#`, with the restrictions described for upper-half encoding as described above. The internal character code is the corresponding JIS character according to the standard algorithm for Shift-JIS conversion. Only characters defined in the JIS code set table can be used with this encoding method.
EUC Coding
  A wide character is represented by a two-character sequence `16#ab#` and `16#cd#`, with both characters being in the upper half. The internal character code is the corresponding JIS character according to the EUC encoding algorithm. Only characters defined in the JIS code set table can be used with this encoding method.
UTF-8 Coding
  A wide character is represented using UCS Transformation Format 8 (UTF-8) as defined in Annex R of ISO 10646-1/Am.2. Depending on the character value, the representation is a one, two, or three byte sequence:

                16#0000#-16#007f#: 2#0xxxxxxx#
                16#0080#-16#07ff#: 2#110xxxxx# 2#10xxxxxx#
                16#0800#-16#ffff#: 2#1110xxxx# 2#10xxxxxx# 2#10xxxxxx#

  where the xxx bits correspond to the left-padded bits of the 16-bit character value. Note that all lower half ASCII characters are represented as ASCII bytes and all upper half characters and other wide characters are represented as sequences of upper-half (The full UTF-8 scheme allows for encoding 31-bit characters as 6-byte sequences, but in this implementation, all UTF-8 sequences of four or more bytes length will be treated as illegal).

Brackets Coding
  In this encoding, a wide character is represented by the following eight character sequence:

                [ " a b c d " ]

  Where `a`, `b`, `c`, `d` are the four hexadecimal characters (using uppercase letters) of the wide character code. For example, [“A345”] is used to represent the wide character with code `16#A345#`. It is also possible (though not required) to use the Brackets coding for upper half characters. For example, the code `16#A3#` can be represented as `[``A3'']`.

  This scheme is compatible with use of the full Wide_Character set, and is also the method used for wide character encoding in the standard ACVC (Ada Compiler Validation Capability) test suite distributions.

Note: Some of these coding schemes do not permit the full use of the Ada character set. For example, neither Shift JIS, nor EUC allow the use of the upper half of the Latin-1 set.

Next: Using Other File Names, Previous: Foreign Language Representation, Up: The GNAT Compilation Model

### 2.3 File Naming Rules

The default file name is determined by the name of the unit that the file contains. The name is formed by taking the full expanded name of the unit and replacing the separating dots with hyphens and using lowercase for all letters.

An exception arises if the file name generated by the above rules starts with one of the characters ‘`a`’, ‘`g`’, ‘`i`’, or ‘`s`’, and the second character is a minus. In this case, the character tilde is used in place of the minus. The reason for this special rule is to avoid clashes with the standard names for child units of the packages System, Ada, Interfaces, and GNAT, which use the prefixes ‘`s-`’, ‘`a-`’, ‘`i-`’, and ‘`g-`’, respectively.

The file extension is `.ads` for a spec and `.adb` for a body. The following list shows some examples of these rules.

`main.ads`
  Main (spec)
`main.adb`
  Main (body)
`arith_functions.ads`
  Arith_Functions (package spec)
`arith_functions.adb`
  Arith_Functions (package body)
`func-spec.ads`
  Func.Spec (child package spec)
`func-spec.adb`
  Func.Spec (child package body)
`main-sub.adb`
  Sub (subunit of Main)
`a~bad.adb`
  A.Bad (child package body)

Following these rules can result in excessively long file names if corresponding unit names are long (for example, if child units or subunits are heavily nested). An option is available to shorten such long file names (called file name “krunching”). This may be particularly useful when programs being developed with GNAT are to be used on operating systems with limited file name lengths. See Using gnatkr.

Of course, no file shortening algorithm can guarantee uniqueness over all possible unit names; if file name krunching is used, it is your responsibility to ensure no name clashes occur. Alternatively you can specify the exact file names that you want used, as described in the next section. Finally, if your Ada programs are migrating from a compiler with a different naming convention, you can use the gnatchop utility to produce source files that follow the GNAT naming conventions. (For details see Renaming Files Using gnatchop.)

Note: in the case of `Windows NT/XP` or `OpenVMS` operating systems, case is not significant. So for example on `Windows XP` if the canonical name is `main-sub.adb`, you can use the file name `Main-Sub.adb` instead. However, case is significant for other operating systems, so for example, if you want to use other than canonically cased file names on a Unix system, you need to follow the procedures described in the next section.

Next: Alternative File Naming Schemes, Previous: File Naming Rules, Up: The GNAT Compilation Model

### 2.4 Using Other File Names

In the previous section, we have described the default rules used by GNAT to determine the file name in which a given unit resides. It is often convenient to follow these default rules, and if you follow them, the compiler knows without being explicitly told where to find all the files it needs.

However, in some cases, particularly when a program is imported from another Ada compiler environment, it may be more convenient for the programmer to specify which file names contain which units. GNAT allows arbitrary file names to be used by means of the Source_File_Name pragma. The form of this pragma is as shown in the following examples:

         pragma Source_File_Name (My_Utilities.Stacks,
           Spec_File_Name => "myutilst_a.ada");
         pragma Source_File_name (My_Utilities.Stacks,
           Body_File_Name => "myutilst.ada");

As shown in this example, the first argument for the pragma is the unit name (in this example a child unit). The second argument has the form of a named association. The identifier indicates whether the file name is for a spec or a body; the file name itself is given by a string literal.

The source file name pragma is a configuration pragma, which means that normally it will be placed in the `gnat.adc` file used to hold configuration pragmas that apply to a complete compilation environment. For more details on how the `gnat.adc` file is created and used see Handling of Configuration Pragmas. GNAT allows completely arbitrary file names to be specified using the source file name pragma. However, if the file name specified has an extension other than `.ads` or `.adb` it is necessary to use a special syntax when compiling the file. The name in this case must be preceded by the special sequence `-x` followed by a space and the name of the language, here `ada`, as in:

         $ gcc -c -x ada peculiar_file_name.sim

`gnatmake` handles non-standard file names in the usual manner (the non-standard file name for the main program is simply used as the argument to gnatmake). Note that if the extension is also non-standard, then it must be included in the `gnatmake` command, it may not be omitted.

Next: Generating Object Files, Previous: Using Other File Names, Up: The GNAT Compilation Model

### 2.5 Alternative File Naming Schemes

In the previous section, we described the use of the `Source_File_Name` pragma to allow arbitrary names to be assigned to individual source files. However, this approach requires one pragma for each file, and especially in large systems can result in very long `gnat.adc` files, and also create a maintenance problem.

GNAT also provides a facility for specifying systematic file naming schemes other than the standard default naming scheme previously described. An alternative scheme for naming is specified by the use of `Source_File_Name` pragmas having the following format:

         pragma Source_File_Name (
            Spec_File_Name  => FILE_NAME_PATTERN
          [,Casing          => CASING_SPEC]
          [,Dot_Replacement => STRING_LITERAL]);

         pragma Source_File_Name (
            Body_File_Name  => FILE_NAME_PATTERN
          [,Casing          => CASING_SPEC]
          [,Dot_Replacement => STRING_LITERAL]);

         pragma Source_File_Name (
            Subunit_File_Name  => FILE_NAME_PATTERN
          [,Casing             => CASING_SPEC]
          [,Dot_Replacement    => STRING_LITERAL]);

         FILE_NAME_PATTERN ::= STRING_LITERAL
         CASING_SPEC ::= Lowercase | Uppercase | Mixedcase

The `FILE_NAME_PATTERN` string shows how the file name is constructed. It contains a single asterisk character, and the unit name is substituted systematically for this asterisk. The optional parameter `Casing` indicates whether the unit name is to be all upper-case letters, all lower-case letters, or mixed-case. If no `Casing` parameter is used, then the default is all lower-case.

The optional `Dot_Replacement` string is used to replace any periods that occur in subunit or child unit names. If no `Dot_Replacement` argument is used then separating dots appear unchanged in the resulting file name. Although the above syntax indicates that the `Casing` argument must appear before the `Dot_Replacement` argument, but it is also permissible to write these arguments in the opposite order.

As indicated, it is possible to specify different naming schemes for bodies, specs, and subunits. Quite often the rule for subunits is the same as the rule for bodies, in which case, there is no need to give a separate `Subunit_File_Name` rule, and in this case the `Body_File_name` rule is used for subunits as well.

The separate rule for subunits can also be used to implement the rather unusual case of a compilation environment (e.g. a single directory) which contains a subunit and a child unit with the same unit name. Although both units cannot appear in the same partition, the Ada Reference Manual allows (but does not require) the possibility of the two units coexisting in the same environment.

The file name translation works in the following steps:

- If there is a specific `Source_File_Name` pragma for the given unit, then this is always used, and any general pattern rules are ignored.
- If there is a pattern type `Source_File_Name` pragma that applies to the unit, then the resulting file name will be used if the file exists. If more than one pattern matches, the latest one will be tried first, and the first attempt resulting in a reference to a file that exists will be used.
- If no pattern type `Source_File_Name` pragma that applies to the unit for which the corresponding file exists, then the standard GNAT default naming rules are used.

As an example of the use of this mechanism, consider a commonly used scheme in which file names are all lower case, with separating periods copied unchanged to the resulting file name, and specs end with `.1.ada`, and bodies end with `.2.ada`. GNAT will follow this scheme if the following two pragmas appear:

         pragma Source_File_Name
           (Spec_File_Name => "*.1.ada");
         pragma Source_File_Name
           (Body_File_Name => "*.2.ada");

The default GNAT scheme is actually implemented by providing the following default pragmas internally:

         pragma Source_File_Name
           (Spec_File_Name => "*.ads", Dot_Replacement => "-");
         pragma Source_File_Name
           (Body_File_Name => "*.adb", Dot_Replacement => "-");

Our final example implements a scheme typically used with one of the Ada 83 compilers, where the separator character for subunits was “__” (two underscores), specs were identified by adding `_.ADA`, bodies by adding `.ADA`, and subunits by adding `.SEP`. All file names were upper case. Child units were not present of course since this was an Ada 83 compiler, but it seems reasonable to extend this scheme to use the same double underscore separator for child units.

         pragma Source_File_Name
           (Spec_File_Name => "*_.ADA",
            Dot_Replacement => "__",
            Casing = Uppercase);
         pragma Source_File_Name
           (Body_File_Name => "*.ADA",
            Dot_Replacement => "__",
            Casing = Uppercase);
         pragma Source_File_Name
           (Subunit_File_Name => "*.SEP",
            Dot_Replacement => "__",
            Casing = Uppercase);

Next: Source Dependencies, Previous: Alternative File Naming Schemes, Up: The GNAT Compilation Model

### 2.6 Generating Object Files

An Ada program consists of a set of source files, and the first step in compiling the program is to generate the corresponding object files. These are generated by compiling a subset of these source files. The files you need to compile are the following:

- If a package spec has no body, compile the package spec to produce the object file for the package.
- If a package has both a spec and a body, compile the body to produce the object file for the package. The source file for the package spec need not be compiled in this case because there is only one object file, which contains the code for both the spec and body of the package.
- For a subprogram, compile the subprogram body to produce the object file for the subprogram. The spec, if one is present, is as usual in a separate file, and need not be compiled.
- In the case of subunits, only compile the parent unit. A single object file is generated for the entire subunit tree, which includes all the subunits.
- Compile child units independently of their parent units (though, of course, the spec of all the ancestor unit must be present in order to compile a child unit).
- Compile generic units in the same manner as any other units. The object files in this case are small dummy files that contain at most the flag used for elaboration checking. This is because GNAT always handles generic instantiation by means of macro expansion. However, it is still necessary to compile generic units, for dependency checking and elaboration purposes.

The preceding rules describe the set of files that must be compiled to generate the object files for a program. Each object file has the same name as the corresponding source file, except that the extension is `.o` as usual.

You may wish to compile other files for the purpose of checking their syntactic and semantic correctness. For example, in the case where a package has a separate spec and body, you would not normally compile the spec. However, it is convenient in practice to compile the spec to make sure it is error-free before compiling clients of this spec, because such compilations will fail if there is an error in the spec.

GNAT provides an option for compiling such files purely for the purposes of checking correctness; such compilations are not required as part of the process of building a program. To compile a file in this checking mode, use the `-gnatc` switch.

Next: The Ada Library Information Files, Previous: Generating Object Files, Up: The GNAT Compilation Model

### 2.7 Source Dependencies

A given object file clearly depends on the source file which is compiled to produce it. Here we are using depends in the sense of a typical `make` utility; in other words, an object file depends on a source file if changes to the source file require the object file to be recompiled. In addition to this basic dependency, a given object may depend on additional source files as follows:

- If a file being compiled `with`'s a unit X, the object file depends on the file containing the spec of unit X. This includes files that are `with`'ed implicitly either because they are parents of `with`'ed child units or they are run-time units required by the language constructs used in a particular unit.
- If a file being compiled instantiates a library level generic unit, the object file depends on both the spec and body files for this generic unit.
- If a file being compiled instantiates a generic unit defined within a package, the object file depends on the body file for the package as well as the spec file.
- If a file being compiled contains a call to a subprogram for which pragma `Inline` applies and inlining is activated with the `-gnatn` switch, the object file depends on the file containing the body of this subprogram as well as on the file containing the spec. Note that for inlining to actually occur as a result of the use of this switch, it is necessary to compile in optimizing mode.

  The use of `-gnatN` activates inlining optimization that is performed by the front end of the compiler. This inlining does not require that the code generation be optimized. Like `-gnatn`, the use of this switch generates additional dependencies.

  When using a gcc-based back end (in practice this means using any version of GNAT other than the JGNAT, .NET or GNAAMP versions), then the use of `-gnatN` is deprecated, and the use of `-gnatn` is preferred. Historically front end inlining was more extensive than the gcc back end inlining, but that is no longer the case.

- If an object file `O` depends on the proper body of a subunit through inlining or instantiation, it depends on the parent unit of the subunit. This means that any modification of the parent unit or one of its subunits affects the compilation of `O`.
- The object file for a parent unit depends on all its subunit body files.
- The previous two rules meant that for purposes of computing dependencies and recompilation, a body and all its subunits are treated as an indivisible whole.

  These rules are applied transitively: if unit `A` `with`'s unit `B`, whose elaboration calls an inlined procedure in package `C`, the object file for unit `A` will depend on the body of `C`, in file `c.adb`.

  The set of dependent files described by these rules includes all the files on which the unit is semantically dependent, as dictated by the Ada language standard. However, it is a superset of what the standard describes, because it includes generic, inline, and subunit dependencies.

  An object file must be recreated by recompiling the corresponding source file if any of the source files on which it depends are modified. For example, if the `make` utility is used to control compilation, the rule for an Ada object file must mention all the source files on which the object file depends, according to the above definition. The determination of the necessary recompilations is done automatically when one uses `gnatmake`.

Next: Binding an Ada Program, Previous: Source Dependencies, Up: The GNAT Compilation Model

### 2.8 The Ada Library Information Files

Each compilation actually generates two output files. The first of these is the normal object file that has a `.o` extension. The second is a text file containing full dependency information. It has the same name as the source file, but an `.ali` extension. This file is known as the Ada Library Information (`ALI`) file. The following information is contained in the `ALI` file.

- Version information (indicates which version of GNAT was used to compile the unit(s) in question)
- Main program information (including priority and time slice settings, as well as the wide character encoding used during compilation).
- List of arguments used in the `gcc` command for the compilation
- Attributes of the unit, including configuration pragmas used, an indication of whether the compilation was successful, exception model used etc.
- A list of relevant restrictions applying to the unit (used for consistency) checking.
- Categorization information (e.g. use of pragma `Pure`).
- Information on all `with`'ed units, including presence of `Elaborate` or `Elaborate_All` pragmas.
- Information from any `Linker_Options` pragmas used in the unit
- Information on the use of `Body_Version` or `Version` attributes in the unit.
- Dependency information. This is a list of files, together with time stamp and checksum information. These are files on which the unit depends in the sense that recompilation is required if any of these units are modified.
- Cross-reference data. Contains information on all entities referenced in the unit. Used by tools like `gnatxref` and `gnatfind` to provide cross-reference information.

For a full detailed description of the format of the `ALI` file, see the source of the body of unit `Lib.Writ`, contained in file `lib-writ.adb` in the GNAT compiler sources.

Next: Mixed Language Programming, Previous: The Ada Library Information Files, Up: The GNAT Compilation Model

### 2.9 Binding an Ada Program

When using languages such as C and C++, once the source files have been compiled the only remaining step in building an executable program is linking the object modules together. This means that it is possible to link an inconsistent version of a program, in which two units have included different versions of the same header.

The rules of Ada do not permit such an inconsistent program to be built. For example, if two clients have different versions of the same package, it is illegal to build a program containing these two clients. These rules are enforced by the GNAT binder, which also determines an elaboration order consistent with the Ada rules.

The GNAT binder is run after all the object files for a program have been created. It is given the name of the main program unit, and from this it determines the set of units required by the program, by reading the corresponding ALI files. It generates error messages if the program is inconsistent or if no valid order of elaboration exists.

If no errors are detected, the binder produces a main program, in Ada by default, that contains calls to the elaboration procedures of those compilation unit that require them, followed by a call to the main program. This Ada program is compiled to generate the object file for the main program. The name of the Ada file is `b~xxx.adb` (with the corresponding spec `b~xxx.ads`) where xxx is the name of the main program unit.

Finally, the linker is used to build the resulting executable program, using the object from the main program from the bind step as well as the object files for the Ada units of the program.

Next: Building Mixed Ada & C++ Programs, Previous: Binding an Ada Program, Up: The GNAT Compilation Model

### 2.10 Mixed Language Programming

This section describes how to develop a mixed-language program, specifically one that comprises units in both Ada and C.

Next: Calling Conventions, Up: Mixed Language Programming

#### 2.10.1 Interfacing to C

Interfacing Ada with a foreign language such as C involves using compiler directives to import and/or export entity definitions in each language—using `extern` statements in C, for instance, and the `Import`, `Export`, and `Convention` pragmas in Ada. A full treatment of these topics is provided in Appendix B, section 1 of the Ada Reference Manual.

There are two ways to build a program using GNAT that contains some Ada sources and some foreign language sources, depending on whether or not the main subprogram is written in Ada. Here is a source example with the main subprogram in Ada:

         /* file1.c */
         #include <stdio.h>

         void print_num (int num)
         {
           printf ("num is %d.\n", num);
           return;
         }

         /* file2.c */

         /* num_from_Ada is declared in my_main.adb */
         extern int num_from_Ada;

         int get_num (void)
         {
           return num_from_Ada;
         }

         --  my_main.adb
         procedure My_Main is

            --  Declare then export an Integer entity called num_from_Ada
            My_Num : Integer := 10;
            pragma Export (C, My_Num, "num_from_Ada");

            --  Declare an Ada function spec for Get_Num, then use
            --  C function get_num for the implementation.
            function Get_Num return Integer;
            pragma Import (C, Get_Num, "get_num");

            --  Declare an Ada procedure spec for Print_Num, then use
            --  C function print_num for the implementation.
            procedure Print_Num (Num : Integer);
            pragma Import (C, Print_Num, "print_num");

         begin
            Print_Num (Get_Num);
         end My_Main;

1. To build this example, first compile the foreign language files to generate object files:

                 gcc -c file1.c
                 gcc -c file2.c

2. Then, compile the Ada units to produce a set of object files and ALI files:

                 gnatmake -c my_main.adb

3. Run the Ada binder on the Ada main program:

                 gnatbind my_main.ali

4. Link the Ada main program, the Ada objects and the other language objects:

                 gnatlink my_main.ali file1.o file2.o

The last three steps can be grouped in a single command:

         gnatmake my_main.adb -largs file1.o file2.o

If the main program is in a language other than Ada, then you may have more than one entry point into the Ada subsystem. You must use a special binder option to generate callable routines that initialize and finalize the Ada units (see Binding with Non-Ada Main Programs). Calls to the initialization and finalization routines must be inserted in the main program, or some other appropriate point in the code. The call to initialize the Ada units must occur before the first Ada subprogram is called, and the call to finalize the Ada units must occur after the last Ada subprogram returns. The binder will place the initialization and finalization subprograms into the `b~xxx.adb` file where they can be accessed by your C sources. To illustrate, we have the following example:

         /* main.c */
         extern void adainit (void);
         extern void adafinal (void);
         extern int add (int, int);
         extern int sub (int, int);

         int main (int argc, char *argv[])
         {
           int a = 21, b = 7;

           adainit();

           /* Should print "21 + 7 = 28" */
           printf ("%d + %d = %d\n", a, b, add (a, b));
           /* Should print "21 - 7 = 14" */
           printf ("%d - %d = %d\n", a, b, sub (a, b));

           adafinal();
         }

         --  unit1.ads
         package Unit1 is
            function Add (A, B : Integer) return Integer;
            pragma Export (C, Add, "add");
         end Unit1;

         --  unit1.adb
         package body Unit1 is
            function Add (A, B : Integer) return Integer is
            begin
               return A + B;
            end Add;
         end Unit1;

         --  unit2.ads
         package Unit2 is
            function Sub (A, B : Integer) return Integer;
            pragma Export (C, Sub, "sub");
         end Unit2;

         --  unit2.adb
         package body Unit2 is
            function Sub (A, B : Integer) return Integer is
            begin
               return A - B;
            end Sub;
         end Unit2;

1. The build procedure for this application is similar to the last example's. First, compile the foreign language files to generate object files:

                 gcc -c main.c

2. Next, compile the Ada units to produce a set of object files and ALI files:

                 gnatmake -c unit1.adb
                 gnatmake -c unit2.adb

3. Run the Ada binder on every generated ALI file. Make sure to use the `-n` option to specify a foreign main program:

                 gnatbind -n unit1.ali unit2.ali

4. Link the Ada main program, the Ada objects and the foreign language objects. You need only list the last ALI file here:

                 gnatlink unit2.ali main.o -o exec_file

   This procedure yields a binary executable called `exec_file`.

Depending on the circumstances (for example when your non-Ada main object does not provide symbol `main`), you may also need to instruct the GNAT linker not to include the standard startup objects by passing the `-nostartfiles` switch to `gnatlink`.

Previous: Interfacing to C, Up: Mixed Language Programming

#### 2.10.2 Calling Conventions

GNAT follows standard calling sequence conventions and will thus interface to any other language that also follows these conventions. The following Convention identifiers are recognized by GNAT:

`Ada`
  This indicates that the standard Ada calling sequence will be used and all Ada data items may be passed without any limitations in the case where GNAT is used to generate both the caller and callee. It is also possible to mix GNAT generated code and code generated by another Ada compiler. In this case, the data types should be restricted to simple cases, including primitive types. Whether complex data types can be passed depends on the situation. Probably it is safe to pass simple arrays, such as arrays of integers or floats. Records may or may not work, depending on whether both compilers lay them out identically. Complex structures involving variant records, access parameters, tasks, or protected types, are unlikely to be able to be passed.

  Note that in the case of GNAT running on a platform that supports HP Ada 83, a higher degree of compatibility can be guaranteed, and in particular records are layed out in an identical manner in the two compilers. Note also that if output from two different compilers is mixed, the program is responsible for dealing with elaboration issues. Probably the safest approach is to write the main program in the version of Ada other than GNAT, so that it takes care of its own elaboration requirements, and then call the GNAT-generated adainit procedure to ensure elaboration of the GNAT components. Consult the documentation of the other Ada compiler for further details on elaboration.

  However, it is not possible to mix the tasking run time of GNAT and HP Ada 83, All the tasking operations must either be entirely within GNAT compiled sections of the program, or entirely within HP Ada 83 compiled sections of the program.

`Assembler`
  Specifies assembler as the convention. In practice this has the same effect as convention Ada (but is not equivalent in the sense of being considered the same convention).

`Asm`
  Equivalent to Assembler.

`COBOL`
  Data will be passed according to the conventions described in section B.4 of the Ada Reference Manual.

`C`
  Data will be passed according to the conventions described in section B.3 of the Ada Reference Manual.

  A note on interfacing to a C “varargs” function:

  - In C, `varargs` allows a function to take a variable number of arguments. There is no direct equivalent in this to Ada. One approach that can be used is to create a C wrapper for each different profile and then interface to this C wrapper. For example, to print an `int` value using `printf`, create a C function `printfi` that takes two arguments, a pointer to a string and an int, and calls `printf`. Then in the Ada program, use pragma `Import` to interface to `printfi`.
  - It may work on some platforms to directly interface to a `varargs` function by providing a specific Ada profile for a particular call. However, this does not work on all platforms, since there is no guarantee that the calling sequence for a two argument normal C function is the same as for calling a `varargs` C function with the same two arguments.

`Default`
  Equivalent to C.

`External`
  Equivalent to C.

`C_Plus_Plus (or CPP)`
  This stands for C++. For most purposes this is identical to C. See the separate description of the specialized GNAT pragmas relating to C++ interfacing for further details.

`Fortran`
  Data will be passed according to the conventions described in section B.5 of the Ada Reference Manual.
`Intrinsic`
  This applies to an intrinsic operation, as defined in the Ada Reference Manual. If a pragma Import (Intrinsic) applies to a subprogram, this means that the body of the subprogram is provided by the compiler itself, usually by means of an efficient code sequence, and that the user does not supply an explicit body for it. In an application program, the pragma may be applied to the following sets of names:
  - Rotate_Left, Rotate_Right, Shift_Left, Shift_Right, Shift_Right_Arithmetic. The corresponding subprogram declaration must have two formal parameters. The first one must be a signed integer type or a modular type with a binary modulus, and the second parameter must be of type Natural. The return type must be the same as the type of the first argument. The size of this type can only be 8, 16, 32, or 64.
  - Binary arithmetic operators: “+”, “-”, “*”, “/” The corresponding operator declaration must have parameters and result type that have the same root numeric type (for example, all three are long_float types). This simplifies the definition of operations that use type checking to perform dimensional checks:

                       type Distance is new Long_Float;
                       type Time     is new Long_Float;
                       type Velocity is new Long_Float;
                       function "/" (D : Distance; T : Time)
                         return Velocity;
                       pragma Import (Intrinsic, "/");

    This common idiom is often programmed with a generic definition and an explicit body. The pragma makes it simpler to introduce such declarations. It incurs no overhead in compilation time or code size, because it is implemented as a single machine instruction.

  - General subprogram entities, to bind an Ada subprogram declaration to a compiler builtin by name with back-ends where such interfaces are available. A typical example is the set of “__builtin” functions exposed by the GCC back-end, as in the following example:

                          function builtin_sqrt (F : Float) return Float;
                          pragma Import (Intrinsic, builtin_sqrt, "__builtin_sqrtf");

    Most of the GCC builtins are accessible this way, and as for other import conventions (e.g. C), it is the user's responsibility to ensure that the Ada subprogram profile matches the underlying builtin expectations.

`Stdcall`
  This is relevant only to Windows XP/2000/NT implementations of GNAT, and specifies that the `Stdcall` calling sequence will be used, as defined by the NT API. Nevertheless, to ease building cross-platform bindings this convention will be handled as a `C` calling convention on non-Windows platforms.

`DLL`
  This is equivalent to `Stdcall`.

`Win32`
  This is equivalent to `Stdcall`.

`Stubbed`
  This is a special convention that indicates that the compiler should provide a stub body that raises `Program_Error`.

GNAT additionally provides a useful pragma `Convention_Identifier` that can be used to parameterize conventions and allow additional synonyms to be specified. For example if you have legacy code in which the convention identifier Fortran77 was used for Fortran, you can use the configuration pragma:

         pragma Convention_Identifier (Fortran77, Fortran);

And from now on the identifier Fortran77 may be used as a convention identifier (for example in an `Import` pragma) with the same meaning as Fortran.

Next: Comparison between GNAT and C/C++ Compilation Models, Previous: Mixed Language Programming, Up: The GNAT Compilation Model

### 2.11 Building Mixed Ada and C++ Programs

A programmer inexperienced with mixed-language development may find that building an application containing both Ada and C++ code can be a challenge. This section gives a few hints that should make this task easier. The first section addresses the differences between interfacing with C and interfacing with C++. The second section looks into the delicate problem of linking the complete application from its Ada and C++ parts. The last section gives some hints on how the GNAT run-time library can be adapted in order to allow inter-language dispatching with a new C++ compiler.

Next: Linking a Mixed C++ & Ada Program, Up: Building Mixed Ada & C++ Programs

#### 2.11.1 Interfacing to C++

GNAT supports interfacing with the G++ compiler (or any C++ compiler generating code that is compatible with the G++ Application Binary Interface —see http://www.codesourcery.com/archives/cxx-abi).

Interfacing can be done at 3 levels: simple data, subprograms, and classes. In the first two cases, GNAT offers a specific `Convention C_Plus_Plus` (or `CPP`) that behaves exactly like `Convention C`. Usually, C++ mangles the names of subprograms. To generate proper mangled names automatically, see Generating Ada Bindings for C and C++ headers). This problem can also be addressed manually in two ways:

- by modifying the C++ code in order to force a C convention using the `extern "C"` syntax.
- by figuring out the mangled name (using e.g. `nm`) and using it as the Link_Name argument of the pragma import.

Interfacing at the class level can be achieved by using the GNAT specific pragmas such as `CPP_Constructor`. See Interfacing to C++, for additional information.

Next: A Simple Example, Previous: Interfacing to C++, Up: Building Mixed Ada & C++ Programs

#### 2.11.2 Linking a Mixed C++ & Ada Program

Usually the linker of the C++ development system must be used to link mixed applications because most C++ systems will resolve elaboration issues (such as calling constructors on global class instances) transparently during the link phase. GNAT has been adapted to ease the use of a foreign linker for the last phase. Three cases can be considered:

1. Using GNAT and G++ (GNU C++ compiler) from the same GCC installation: The C++ linker can simply be called by using the C++ specific driver called `g++`.

   Note that if the C++ code uses inline functions, you will need to compile your C++ code with the `-fkeep-inline-functions` switch in order to provide an existing function implementation that the Ada code can link with.

                 $ g++ -c -fkeep-inline-functions file1.C
                 $ g++ -c -fkeep-inline-functions file2.C
                 $ gnatmake ada_unit -largs file1.o file2.o --LINK=g++

2. Using GNAT and G++ from two different GCC installations: If both compilers are on the `PATH`, the previous method may be used. It is important to note that environment variables such as `C_INCLUDE_PATH`, `GCC_EXEC_PREFIX`, `BINUTILS_ROOT`, and `GCC_ROOT` will affect both compilers at the same time and may make one of the two compilers operate improperly if set during invocation of the wrong compiler. It is also very important that the linker uses the proper `libgcc.a` GCC library – that is, the one from the C++ compiler installation. The implicit link command as suggested in the `gnatmake` command from the former example can be replaced by an explicit link command with the full-verbosity option in order to verify which library is used:

                 $ gnatbind ada_unit
                 $ gnatlink -v -v ada_unit file1.o file2.o --LINK=c++

   If there is a problem due to interfering environment variables, it can be worked around by using an intermediate script. The following example shows the proper script to use when GNAT has not been installed at its default location and g++ has been installed at its default location:

                 $ cat ./my_script
                 #!/bin/sh
                 unset BINUTILS_ROOT
                 unset GCC_ROOT
                 c++ $*
                 $ gnatlink -v -v ada_unit file1.o file2.o --LINK=./my_script

3. Using a non-GNU C++ compiler: The commands previously described can be used to insure that the C++ linker is used. Nonetheless, you need to add a few more parameters to the link command line, depending on the exception mechanism used.

   If the `setjmp/longjmp` exception mechanism is used, only the paths to the libgcc libraries are required:

                 $ cat ./my_script
                 #!/bin/sh
                 CC $* `gcc -print-file-name=libgcc.a` `gcc -print-file-name=libgcc_eh.a`
                 $ gnatlink ada_unit file1.o file2.o --LINK=./my_script

   Where CC is the name of the non-GNU C++ compiler.

   If the `zero cost` exception mechanism is used, and the platform supports automatic registration of exception tables (e.g. Solaris), paths to more objects are required:

                 $ cat ./my_script
                 #!/bin/sh
                 CC `gcc -print-file-name=crtbegin.o` $* \
                 `gcc -print-file-name=libgcc.a` `gcc -print-file-name=libgcc_eh.a` \
                 `gcc -print-file-name=crtend.o`
                 $ gnatlink ada_unit file1.o file2.o --LINK=./my_script

   If the `zero cost` exception mechanism is used, and the platform doesn't support automatic registration of exception tables (e.g. HP-UX or AIX), the simple approach described above will not work and a pre-linking phase using GNAT will be necessary.

Another alternative is to use the `gprbuild` multi-language builder which has a large knowledge base and knows how to link Ada and C++ code together automatically in most cases.

Next: Interfacing with C++ constructors, Previous: Linking a Mixed C++ & Ada Program, Up: Building Mixed Ada & C++ Programs

#### 2.11.3 A Simple Example

The following example, provided as part of the GNAT examples, shows how to achieve procedural interfacing between Ada and C++ in both directions. The C++ class A has two methods. The first method is exported to Ada by the means of an extern C wrapper function. The second method calls an Ada subprogram. On the Ada side, The C++ calls are modelled by a limited record with a layout comparable to the C++ class. The Ada subprogram, in turn, calls the C++ method. So, starting from the C++ main program, the process passes back and forth between the two languages.

Here are the compilation commands:

         $ gnatmake -c simple_cpp_interface
         $ g++ -c cpp_main.C
         $ g++ -c ex7.C
         $ gnatbind -n simple_cpp_interface
         $ gnatlink simple_cpp_interface -o cpp_main --LINK=g++
               -lstdc++ ex7.o cpp_main.o

Here are the corresponding sources:

         //cpp_main.C

         #include "ex7.h"

         extern "C" {
           void adainit (void);
           void adafinal (void);
           void method1 (A *t);
         }

         void method1 (A *t)
         {
           t->method1 ();
         }

         int main ()
         {
           A obj;
           adainit ();
           obj.method2 (3030);
           adafinal ();
         }

         //ex7.h

         class Origin {
          public:
           int o_value;
         };
         class A : public Origin {
          public:
           void method1 (void);
           void method2 (int v);
           A();
           int   a_value;
         };

         //ex7.C

         #include "ex7.h"
         #include <stdio.h>

         extern "C" { void ada_method2 (A *t, int v);}

         void A::method1 (void)
         {
           a_value = 2020;
           printf ("in A::method1, a_value = %d \n",a_value);

         }

         void A::method2 (int v)
         {
            ada_method2 (this, v);
            printf ("in A::method2, a_value = %d \n",a_value);

         }

         A::A(void)
         {
            a_value = 1010;
           printf ("in A::A, a_value = %d \n",a_value);
         }

         -- Ada sources
         package body Simple_Cpp_Interface is

            procedure Ada_Method2 (This : in out A; V : Integer) is
            begin
               Method1 (This);
               This.A_Value := V;
            end Ada_Method2;

         end Simple_Cpp_Interface;

         with System;
         package Simple_Cpp_Interface is
            type A is limited
               record
                  Vptr    : System.Address;
                  O_Value : Integer;
                  A_Value : Integer;
               end record;
            pragma Convention (C, A);

            procedure Method1 (This : in out A);
            pragma Import (C, Method1);

            procedure Ada_Method2 (This : in out A; V : Integer);
            pragma Export (C, Ada_Method2);

         end Simple_Cpp_Interface;

Next: Interfacing with C++ at the Class Level, Previous: A Simple Example, Up: Building Mixed Ada & C++ Programs

#### 2.11.4 Interfacing with C++ constructors

In order to interface with C++ constructors GNAT provides the `pragma CPP_Constructor` (See Interfacing to C++, for additional information). In this section we present some common uses of C++ constructors in mixed-languages programs in GNAT.

Let us assume that we need to interface with the following C++ class:

         class Root {
         public:
           int  a_value;
           int  b_value;
           virtual int Get_Value ();
           Root();              // Default constructor
           Root(int v);         // 1st non-default constructor
           Root(int v, int w);  // 2nd non-default constructor
         };

For this purpose we can write the following package spec (further information on how to build this spec is available in Interfacing with C++ at the Class Level and Generating Ada Bindings for C and C++ headers).

         with Interfaces.C; use Interfaces.C;
         package Pkg_Root is
           type Root is tagged limited record
              A_Value : int;
              B_Value : int;
           end record;
           pragma Import (CPP, Root);

           function Get_Value (Obj : Root) return int;
           pragma Import (CPP, Get_Value);

           function Constructor return Root;
           pragma Cpp_Constructor (Constructor, "_ZN4RootC1Ev");

           function Constructor (v : Integer) return Root;
           pragma Cpp_Constructor (Constructor, "_ZN4RootC1Ei");

           function Constructor (v, w : Integer) return Root;
           pragma Cpp_Constructor (Constructor, "_ZN4RootC1Eii");
         end Pkg_Root;

On the Ada side the constructor is represented by a function (whose name is arbitrary) that returns the classwide type corresponding to the imported C++ class. Although the constructor is described as a function, it is typically a procedure with an extra implicit argument (the object being initialized) at the implementation level. GNAT issues the appropriate call, whatever it is, to get the object properly initialized.

Constructors can only appear in the following contexts:

- On the right side of an initialization of an object of type T.
- On the right side of an initialization of a record component of type T.
- In an Ada 2005 limited aggregate.
- In an Ada 2005 nested limited aggregate.
- In an Ada 2005 limited aggregate that initializes an object built in place by an extended return statement.

In a declaration of an object whose type is a class imported from C++, either the default C++ constructor is implicitly called by GNAT, or else the required C++ constructor must be explicitly called in the expression that initializes the object. For example:

           Obj1 : Root;
           Obj2 : Root := Constructor;
           Obj3 : Root := Constructor (v => 10);
           Obj4 : Root := Constructor (30, 40);

The first two declarations are equivalent: in both cases the default C++ constructor is invoked (in the former case the call to the constructor is implicit, and in the latter case the call is explicit in the object declaration). `Obj3` is initialized by the C++ non-default constructor that takes an integer argument, and `Obj4` is initialized by the non-default C++ constructor that takes two integers.

Let us derive the imported C++ class in the Ada side. For example:

           type DT is new Root with record
              C_Value : Natural := 2009;
           end record;

In this case the components DT inherited from the C++ side must be initialized by a C++ constructor, and the additional Ada components of type DT are initialized by GNAT. The initialization of such an object is done either by default, or by means of a function returning an aggregate of type DT, or by means of an extension aggregate.

           Obj5 : DT;
           Obj6 : DT := Function_Returning_DT (50);
           Obj7 : DT := (Constructor (30,40) with C_Value => 50);

The declaration of `Obj5` invokes the default constructors: the C++ default constructor of the parent type takes care of the initialization of the components inherited from Root, and GNAT takes care of the default initialization of the additional Ada components of type DT (that is, `C_Value` is initialized to value 2009). The order of invocation of the constructors is consistent with the order of elaboration required by Ada and C++. That is, the constructor of the parent type is always called before the constructor of the derived type.

Let us now consider a record that has components whose type is imported from C++. For example:

           type Rec1 is limited record
              Data1 : Root := Constructor (10);
              Value : Natural := 1000;
           end record;

           type Rec2 (D : Integer := 20) is limited record
              Rec   : Rec1;
              Data2 : Root := Constructor (D, 30);
           end record;

The initialization of an object of type `Rec2` will call the non-default C++ constructors specified for the imported components. For example:

           Obj8 : Rec2 (40);

Using Ada 2005 we can use limited aggregates to initialize an object invoking C++ constructors that differ from those specified in the type declarations. For example:

           Obj9 : Rec2 := (Rec => (Data1 => Constructor (15, 16),
                                   others => <>),
                           others => <>);

The above declaration uses an Ada 2005 limited aggregate to initialize `Obj9`, and the C++ constructor that has two integer arguments is invoked to initialize the `Data1` component instead of the constructor specified in the declaration of type `Rec1`. In Ada 2005 the box in the aggregate indicates that unspecified components are initialized using the expression (if any) available in the component declaration. That is, in this case discriminant `D` is initialized to value `20`, `Value` is initialized to value 1000, and the non-default C++ constructor that handles two integers takes care of initializing component `Data2` with values `20,30`.

In Ada 2005 we can use the extended return statement to build the Ada equivalent to C++ non-default constructors. For example:

           function Constructor (V : Integer) return Rec2 is
           begin
              return Obj : Rec2 := (Rec => (Data1  => Constructor (V, 20),
                                            others => <>),
                                    others => <>) do
                 --  Further actions required for construction of
                 --  objects of type Rec2
                 ...
              end record;
           end Constructor;

In this example the extended return statement construct is used to build in place the returned object whose components are initialized by means of a limited aggregate. Any further action associated with the constructor can be placed inside the construct.

Previous: Interfacing with C++ constructors, Up: Building Mixed Ada & C++ Programs

#### 2.11.5 Interfacing with C++ at the Class Level

In this section we demonstrate the GNAT features for interfacing with C++ by means of an example making use of Ada 2005 abstract interface types. This example consists of a classification of animals; classes have been used to model our main classification of animals, and interfaces provide support for the management of secondary classifications. We first demonstrate a case in which the types and constructors are defined on the C++ side and imported from the Ada side, and latter the reverse case.

The root of our derivation will be the `Animal` class, with a single private attribute (the `Age` of the animal) and two public primitives to set and get the value of this attribute.

         class Animal {
          public:
            virtual void Set_Age (int New_Age);
            virtual int Age ();
          private:
            int Age_Count;
         };

Abstract interface types are defined in C++ by means of classes with pure virtual functions and no data members. In our example we will use two interfaces that provide support for the common management of `Carnivore` and `Domestic` animals:

         class Carnivore {
         public:
            virtual int Number_Of_Teeth () = 0;
         };

         class Domestic {
         public:
            virtual void Set_Owner (char* Name) = 0;
         };

Using these declarations, we can now say that a `Dog` is an animal that is both Carnivore and Domestic, that is:

         class Dog : Animal, Carnivore, Domestic {
          public:
            virtual int  Number_Of_Teeth ();
            virtual void Set_Owner (char* Name);

            Dog(); // Constructor
          private:
            int  Tooth_Count;
            char *Owner;
         };

In the following examples we will assume that the previous declarations are located in a file named `animals.h`. The following package demonstrates how to import these C++ declarations from the Ada side:

         with Interfaces.C.Strings; use Interfaces.C.Strings;
         package Animals is
           type Carnivore is interface;
           pragma Convention (C_Plus_Plus, Carnivore);
           function Number_Of_Teeth (X : Carnivore)
              return Natural is abstract;

           type Domestic is interface;
           pragma Convention (C_Plus_Plus, Set_Owner);
           procedure Set_Owner
             (X    : in out Domestic;
              Name : Chars_Ptr) is abstract;

           type Animal is tagged record
             Age : Natural := 0;
           end record;
           pragma Import (C_Plus_Plus, Animal);

           procedure Set_Age (X : in out Animal; Age : Integer);
           pragma Import (C_Plus_Plus, Set_Age);

           function Age (X : Animal) return Integer;
           pragma Import (C_Plus_Plus, Age);

           type Dog is new Animal and Carnivore and Domestic with record
             Tooth_Count : Natural;
             Owner       : String (1 .. 30);
           end record;
           pragma Import (C_Plus_Plus, Dog);

           function Number_Of_Teeth (A : Dog) return Integer;
           pragma Import (C_Plus_Plus, Number_Of_Teeth);

           procedure Set_Owner (A : in out Dog; Name : Chars_Ptr);
           pragma Import (C_Plus_Plus, Set_Owner);

           function New_Dog return Dog;
           pragma CPP_Constructor (New_Dog);
           pragma Import (CPP, New_Dog, "_ZN3DogC2Ev");
         end Animals;

Thanks to the compatibility between GNAT run-time structures and the C++ ABI, interfacing with these C++ classes is easy. The only requirement is that all the primitives and components must be declared exactly in the same order in the two languages.

Regarding the abstract interfaces, we must indicate to the GNAT compiler by means of a `pragma Convention (C_Plus_Plus)`, the convention used to pass the arguments to the called primitives will be the same as for C++. For the imported classes we use `pragma Import` with convention `C_Plus_Plus` to indicate that they have been defined on the C++ side; this is required because the dispatch table associated with these tagged types will be built in the C++ side and therefore will not contain the predefined Ada primitives which Ada would otherwise expect.

As the reader can see there is no need to indicate the C++ mangled names associated with each subprogram because it is assumed that all the calls to these primitives will be dispatching calls. The only exception is the constructor, which must be registered with the compiler by means of `pragma CPP_Constructor` and needs to provide its associated C++ mangled name because the Ada compiler generates direct calls to it.

With the above packages we can now declare objects of type Dog on the Ada side and dispatch calls to the corresponding subprograms on the C++ side. We can also extend the tagged type Dog with further fields and primitives, and override some of its C++ primitives on the Ada side. For example, here we have a type derivation defined on the Ada side that inherits all the dispatching primitives of the ancestor from the C++ side.

         with Animals; use Animals;
         package Vaccinated_Animals is
           type Vaccinated_Dog is new Dog with null record;
           function Vaccination_Expired (A : Vaccinated_Dog) return Boolean;
         end Vaccinated_Animals;

It is important to note that, because of the ABI compatibility, the programmer does not need to add any further information to indicate either the object layout or the dispatch table entry associated with each dispatching operation.

Now let us define all the types and constructors on the Ada side and export them to C++, using the same hierarchy of our previous example:

         with Interfaces.C.Strings;
         use Interfaces.C.Strings;
         package Animals is
           type Carnivore is interface;
           pragma Convention (C_Plus_Plus, Carnivore);
           function Number_Of_Teeth (X : Carnivore)
              return Natural is abstract;

           type Domestic is interface;
           pragma Convention (C_Plus_Plus, Set_Owner);
           procedure Set_Owner
             (X    : in out Domestic;
              Name : Chars_Ptr) is abstract;

           type Animal is tagged record
             Age : Natural := 0;
           end record;
           pragma Convention (C_Plus_Plus, Animal);

           procedure Set_Age (X : in out Animal; Age : Integer);
           pragma Export (C_Plus_Plus, Set_Age);

           function Age (X : Animal) return Integer;
           pragma Export (C_Plus_Plus, Age);

           type Dog is new Animal and Carnivore and Domestic with record
             Tooth_Count : Natural;
             Owner       : String (1 .. 30);
           end record;
           pragma Convention (C_Plus_Plus, Dog);

           function Number_Of_Teeth (A : Dog) return Integer;
           pragma Export (C_Plus_Plus, Number_Of_Teeth);

           procedure Set_Owner (A : in out Dog; Name : Chars_Ptr);
           pragma Export (C_Plus_Plus, Set_Owner);

           function New_Dog return Dog'Class;
           pragma Export (C_Plus_Plus, New_Dog);
         end Animals;

Compared with our previous example the only difference is the use of `pragma Export` to indicate to the GNAT compiler that the primitives will be available to C++. Thanks to the ABI compatibility, on the C++ side there is nothing else to be done; as explained above, the only requirement is that all the primitives and components are declared in exactly the same order.

For completeness, let us see a brief C++ main program that uses the declarations available in `animals.h` (presented in our first example) to import and use the declarations from the Ada side, properly initializing and finalizing the Ada run-time system along the way:

         #include "animals.h"
         #include <iostream>
         using namespace std;

         void Check_Carnivore (Carnivore *obj) {...}
         void Check_Domestic (Domestic *obj)   {...}
         void Check_Animal (Animal *obj)       {...}
         void Check_Dog (Dog *obj)             {...}

         extern "C" {
           void adainit (void);
           void adafinal (void);
           Dog* new_dog ();
         }

         void test ()
         {
           Dog *obj = new_dog();  // Ada constructor
           Check_Carnivore (obj); // Check secondary DT
           Check_Domestic (obj);  // Check secondary DT
           Check_Animal (obj);    // Check primary DT
           Check_Dog (obj);       // Check primary DT
         }

         int main ()
         {
           adainit ();  test();  adafinal ();
           return 0;
         }

Next: Comparison between GNAT and Conventional Ada Library Models, Previous: Building Mixed Ada & C++ Programs, Up: The GNAT Compilation Model

### 2.12 Comparison between GNAT and C/C++ Compilation Models

The GNAT model of compilation is close to the C and C++ models. You can think of Ada specs as corresponding to header files in C. As in C, you don't need to compile specs; they are compiled when they are used. The Ada `with` is similar in effect to the `#include` of a C header.

One notable difference is that, in Ada, you may compile specs separately to check them for semantic and syntactic accuracy. This is not always possible with C headers because they are fragments of programs that have less specific syntactic or semantic rules.

The other major difference is the requirement for running the binder, which performs two important functions. First, it checks for consistency. In C or C++, the only defense against assembling inconsistent programs lies outside the compiler, in a makefile, for example. The binder satisfies the Ada requirement that it be impossible to construct an inconsistent program when the compiler is used in normal mode.

The other important function of the binder is to deal with elaboration issues. There are also elaboration issues in C++ that are handled automatically. This automatic handling has the advantage of being simpler to use, but the C++ programmer has no control over elaboration. Where `gnatbind` might complain there was no valid order of elaboration, a C++ compiler would simply construct a program that malfunctioned at run time.

Previous: Comparison between GNAT and C/C++ Compilation Models, Up: The GNAT Compilation Model

### 2.13 Comparison between GNAT and Conventional Ada Library Models

This section is intended for Ada programmers who have used an Ada compiler implementing the traditional Ada library model, as described in the Ada Reference Manual.

In GNAT, there is no “library” in the normal sense. Instead, the set of source files themselves acts as the library. Compiling Ada programs does not generate any centralized information, but rather an object file and a ALI file, which are of interest only to the binder and linker. In a traditional system, the compiler reads information not only from the source file being compiled, but also from the centralized library. This means that the effect of a compilation depends on what has been previously compiled. In particular:

- When a unit is `with`'ed, the unit seen by the compiler corresponds to the version of the unit most recently compiled into the library.
- Inlining is effective only if the necessary body has already been compiled into the library.
- Compiling a unit may obsolete other units in the library.

In GNAT, compiling one unit never affects the compilation of any other units because the compiler reads only source files. Only changes to source files can affect the results of a compilation. In particular:

- When a unit is `with`'ed, the unit seen by the compiler corresponds to the source version of the unit that is currently accessible to the compiler.
- Inlining requires the appropriate source files for the package or subprogram bodies to be available to the compiler. Inlining is always effective, independent of the order in which units are complied.
- Compiling a unit never affects any other compilations. The editing of sources may cause previous compilations to be out of date if they depended on the source file being modified.

The most important result of these differences is that order of compilation is never significant in GNAT. There is no situation in which one is required to do one compilation before another. What shows up as order of compilation requirements in the traditional Ada library becomes, in GNAT, simple source dependencies; in other words, there is only a set of rules saying what source files must be present when a file is compiled.

Next: Binding Using gnatbind, Previous: The GNAT Compilation Model, Up: Top

## 3 Compiling Using `gcc`

This chapter discusses how to compile Ada programs using the `gcc` command. It also describes the set of switches that can be used to control the behavior of the compiler.

Next: Switches for gcc, Up: Compiling Using gcc

### 3.1 Compiling Programs

The first step in creating an executable program is to compile the units of the program using the `gcc` command. You must compile the following files:

- the body file (`.adb`) for a library level subprogram or generic subprogram
- the spec file (`.ads`) for a library level package or generic package that has no body
- the body file (`.adb`) for a library level package or generic package that has a body

You need not compile the following files

- the spec of a library unit which has a body
- subunits

because they are compiled as part of compiling related units. GNAT package specs when the corresponding body is compiled, and subunits when the parent is compiled.

If you attempt to compile any of these files, you will get one of the following error messages (where fff is the name of the file you compiled):

         cannot generate code for file fff (package spec)
         to check package spec, use -gnatc

         cannot generate code for file fff (missing subunits)
         to check parent unit, use -gnatc

         cannot generate code for file fff (subprogram spec)
         to check subprogram spec, use -gnatc

         cannot generate code for file fff (subunit)
         to check subunit, use -gnatc

As indicated by the above error messages, if you want to submit one of these files to the compiler to check for correct semantics without generating code, then use the `-gnatc` switch.

The basic command for compiling a file containing an Ada unit is

         $ gcc -c [switches] file name

where file name is the name of the Ada file (usually having an extension `.ads` for a spec or `.adb` for a body). You specify the `-c` switch to tell `gcc` to compile, but not link, the file. The result of a successful compilation is an object file, which has the same name as the source file but an extension of `.o` and an Ada Library Information (ALI) file, which also has the same name as the source file, but with `.ali` as the extension. GNAT creates these two output files in the current directory, but you may specify a source file in any directory using an absolute or relative path specification containing the directory information.

`gcc` is actually a driver program that looks at the extensions of the file arguments and loads the appropriate compiler. For example, the GNU C compiler is `cc1`, and the Ada compiler is `gnat1`. These programs are in directories known to the driver program (in some configurations via environment variables you set), but need not be in your path. The `gcc` driver also calls the assembler and any other utilities needed to complete the generation of the required object files.

It is possible to supply several file names on the same `gcc` command. This causes `gcc` to call the appropriate compiler for each file. For example, the following command lists three separate files to be compiled:

         $ gcc -c x.adb y.adb z.c

calls `gnat1` (the Ada compiler) twice to compile `x.adb` and `y.adb`, and `cc1` (the C compiler) once to compile `z.c`. The compiler generates three object files `x.o`, `y.o` and `z.o` and the two ALI files `x.ali` and `y.ali` from the Ada compilations. Any switches apply to all the files listed, except for `-gnatx` switches, which apply only to Ada compilations.

Next: Search Paths and the Run-Time Library (RTL), Previous: Compiling Programs, Up: Compiling Using gcc

### 3.2 Switches for `gcc`

The `gcc` command accepts switches that control the compilation process. These switches are fully described in this section. First we briefly list all the switches, in alphabetical order, then we describe the switches in more detail in functionally grouped sections.

More switches exist for GCC than those documented here, especially for specific targets. However, their use is not recommended as they may change code generation in ways that are incompatible with the Ada run-time library, or can cause inconsistencies between compilation units.

`-b target`
  Compile your program to run on target, which is the name of a system configuration. You must have a GNAT cross-compiler built if target is not the same as your host system.
`-Bdir`
  Load compiler executables (for example, `gnat1`, the Ada compiler) from dir instead of the default location. Only use this switch when multiple versions of the GNAT compiler are available. See Options for Directory Search, for further details. You would normally use the `-b` or `-V` switch instead.
`-c`
  Compile. Always use this switch when compiling Ada programs.

  Note: for some other languages when using `gcc`, notably in the case of C and C++, it is possible to use use `gcc` without a `-c` switch to compile and link in one step. In the case of GNAT, you cannot use this approach, because the binder must be run and `gcc` cannot be used to run the GNAT binder.

`-fcallgraph-info[=su,da]`
  Makes the compiler output callgraph information for the program, on a per-file basis. The information is generated in the VCG format. It can be decorated with additional, per-node and/or per-edge information, if a list of comma-separated markers is additionally specified. When the su marker is specified, the callgraph is decorated with stack usage information; it is equivalent to `-fstack-usage`. When the da marker is specified, the callgraph is decorated with information about dynamically allocated objects.
`-fdump-scos`
  Generates SCO (Source Coverage Obligation) information in the ALI file. This information is used by advanced coverage tools. See unit `SCOs` in the compiler sources for details in files `scos.ads` and `scos.adb`.
`-flto[=n]`
  Enables Link Time Optimization. This switch must be used in conjunction with the traditional `-Ox` switches and instructs the compiler to defer most optimizations until the link stage. The advantage of this approach is that the compiler can do a whole-program analysis and choose the best interprocedural optimization strategy based on a complete view of the program, instead of a fragmentary view with the usual approach. This can also speed up the compilation of huge programs and reduce the size of the final executable, compared with a per-unit compilation with full inlining across modules enabled with the `-gnatn2` switch. The drawback of this approach is that it may require much more memory. The switch, as well as the accompanying `-Ox` switches, must be specified both for the compilation and the link phases. If the n parameter is specified, the optimization and final code generation at link time are executed using n parallel jobs by means of an installed `make` program.
`-fno-inline`
  Suppresses all inlining, even if other optimization or inlining switches are set. This includes suppression of inlining that results from the use of the pragma `Inline_Always`. Any occurrences of pragma `Inline` or `Inline_Always` are ignored, and `-gnatn` and `-gnatN` have no effects if this switch is present. Note that inlining can also be suppressed on a finer-grained basis with pragma `No_Inline`.
`-fno-inline-functions`
  Suppresses automatic inlining of subprograms, which is enabled if `-O3` is used.
`-fno-inline-small-functions`
  Suppresses automatic inlining of small subprograms, which is enabled if `-O2` is used.
`-fno-inline-functions-called-once`
  Suppresses inlining of subprograms local to the unit and called once from within it, which is enabled if `-O1` is used.
`-fno-ivopts`
  Suppresses high-level loop induction variable optimizations, which are enabled if `-O1` is used. These optimizations are generally profitable but, for some specific cases of loops with numerous uses of the iteration variable that follow a common pattern, they may end up destroying the regularity that could be exploited at a lower level and thus producing inferior code.
`-fno-strict-aliasing`
  Causes the compiler to avoid assumptions regarding non-aliasing of objects of different types. See Optimization and Strict Aliasing for details.
`-fstack-check`
  Activates stack checking. See Stack Overflow Checking for details.
`-fstack-usage`
  Makes the compiler output stack usage information for the program, on a per-subprogram basis. See Static Stack Usage Analysis for details.
`-g`
  Generate debugging information. This information is stored in the object file and copied from there to the final executable file by the linker, where it can be read by the debugger. You must use the `-g` switch if you plan on using the debugger.
`-gnat83`
  Enforce Ada 83 restrictions.
`-gnat95`
  Enforce Ada 95 restrictions.
`-gnat05`
  Allow full Ada 2005 features.
`-gnat2005`
  Allow full Ada 2005 features (same as `-gnat05`)
`-gnat12`
`-gnat2012`
  Allow full Ada 2012 features (same as `-gnat12`)
`-gnata`
  Assertions enabled. `Pragma Assert` and `pragma Debug` to be activated. Note that these pragmas can also be controlled using the configuration pragmas `Assertion_Policy` and `Debug_Policy`. It also activates pragmas `Check`, `Precondition`, and `Postcondition`. Note that these pragmas can also be controlled using the configuration pragma `Check_Policy`. In Ada 2012, it also activates all assertions defined in the RM as aspects: preconditions, postconditions, type invariants and (sub)type predicates. In all Ada modes, corresponding pragmas for type invariants and (sub)type predicates are also activated.
`-gnatA`
  Avoid processing `gnat.adc`. If a `gnat.adc` file is present, it will be ignored.
`-gnatb`
  Generate brief messages to `stderr` even if verbose mode set.
`-gnatB`
  Assume no invalid (bad) values except for 'Valid attribute use (see Validity Checking).
`-gnatc`
  Check syntax and semantics only (no code generation attempted).
`-gnatC`
  Generate CodePeer information (no code generation attempted). This switch will generate an intermediate representation suitable for use by CodePeer (`.scil` files). This switch is not compatible with code generation (it will, among other things, disable some switches such as -gnatn, and enable others such as -gnata).
`-gnatd`
  Specify debug options for the compiler. The string of characters after the `-gnatd` specify the specific debug options. The possible characters are 0-9, a-z, A-Z, optionally preceded by a dot. See compiler source file `debug.adb` for details of the implemented debug options. Certain debug options are relevant to applications programmers, and these are documented at appropriate points in this users guide.
`-gnatD`
  Create expanded source files for source level debugging. This switch also suppress generation of cross-reference information (see `-gnatx`).
`-gnateA`
  Check that there is no aliasing between two parameters of the same subprogram.
`-gnatec=path`
  Specify a configuration pragma file (the equal sign is optional) (see The Configuration Pragmas Files).
`-gnated`
  Disable atomic synchronization
`-gnateDsymbol[=value]`
  Defines a symbol, associated with value, for preprocessing. (see Integrated Preprocessing).
`-gnateE`
  Generate extra information in exception messages. In particular, display extra column information and the value and range associated with index and range check failures, and extra column information for access checks. In cases where the compiler is able to determine at compile time that a check will fail, it gives a warning, and the extra information is not produced at run time.
`-gnatef`
  Display full source path name in brief error messages.
`-gnateF`
  Check for overflow on all floating-point operations, including those for unconstrained predefined types. See description of pragma `Check_Float_Overflow` in GNAT RM.
`-gnateG`
  Save result of preprocessing in a text file.
`-gnateinnn`
  Set maximum number of instantiations during compilation of a single unit to nnn. This may be useful in increasing the default maximum of 8000 for the rare case when a single unit legitimately exceeds this limit.
`-gnateInnn`
  Indicates that the source is a multi-unit source and that the index of the unit to compile is nnn. nnn needs to be a positive number and need to be a valid index in the multi-unit source.
`-gnatem=path`
  Specify a mapping file (the equal sign is optional) (see Units to Sources Mapping Files).
`-gnatep=file`
  Specify a preprocessing data file (the equal sign is optional) (see Integrated Preprocessing).
`-gnateP`
  Turn categorization dependency errors into warnings. Ada requires that units that WITH one another have compatible categories, for example a Pure unit cannot WITH a Preelaborate unit. If this switch is used, these errors become warnings (which can be ignored, or suppressed in the usual manner). This can be useful in some specialized circumstances such as the temporary use of special test software.
`-gnateS`
  Synonym of `-fdump-scos`, kept for backards compatibility.
`-gnatet`
  Generate target dependent information.
`-gnateV`
  Check validity of subprogram parameters.
`-gnateY`
  Ignore all STYLE_CHECKS pragmas. Full legality checks are still carried out, but the pragmas have no effect on what style checks are active. This allows all style checking options to be controlled from the command line.
`-gnatE`
  Full dynamic elaboration checks.
`-gnatf`
  Full errors. Multiple errors per line, all undefined references, do not attempt to suppress cascaded errors.
`-gnatF`
  Externals names are folded to all uppercase.
`-gnatg`
  Internal GNAT implementation mode. This should not be used for applications programs, it is intended only for use by the compiler and its run-time library. For documentation, see the GNAT sources. Note that `-gnatg` implies `-gnatwae` and `-gnatyg` so that all standard warnings and all standard style options are turned on. All warnings and style messages are treated as errors.
`-gnatG=nn`
  List generated expanded code in source form.
`-gnath`
  Output usage information. The output is written to `stdout`.
`-gnatic`
  Identifier character set (c=1/2/3/4/8/9/p/f/n/w). For details of the possible selections for c, see Character Set Control.
`-gnatI`
  Ignore representation clauses. When this switch is used, representation clauses are treated as comments. This is useful when initially porting code where you want to ignore rep clause problems, and also for compiling foreign code (particularly for use with ASIS). The representation clauses that are ignored are: enumeration_representation_clause, record_representation_clause, and attribute_definition_clause for the following attributes: Address, Alignment, Bit_Order, Component_Size, Machine_Radix, Object_Size, Size, Small, Stream_Size, and Value_Size. Note that this option should be used only for compiling – the code is likely to malfunction at run time.
`-gnatjnn`
  Reformat error messages to fit on nn character lines
`-gnatk=n`
  Limit file names to n (1-999) characters (`k` = krunch).
`-gnatl`
  Output full source listing with embedded error messages.
`-gnatL`
  Used in conjunction with -gnatG or -gnatD to intersperse original source lines (as comment lines with line numbers) in the expanded source output.
`-gnatm=n`
  Limit number of detected error or warning messages to n where n is in the range 1..999999. The default setting if no switch is given is 9999. If the number of warnings reaches this limit, then a message is output and further warnings are suppressed, but the compilation is continued. If the number of error messages reaches this limit, then a message is output and the compilation is abandoned. The equal sign here is optional. A value of zero means that no limit applies.
`-gnatn[12]`
  Activate inlining for subprograms for which pragma `Inline` is specified. This inlining is performed by the GCC back-end. An optional digit sets the inlining level: 1 for moderate inlining across modules or 2 for full inlining across modules. If no inlining level is specified, the compiler will pick it based on the optimization level.
`-gnatN`
  Activate front end inlining for subprograms for which pragma `Inline` is specified. This inlining is performed by the front end and will be visible in the `-gnatG` output.

  When using a gcc-based back end (in practice this means using any version of GNAT other than the JGNAT, .NET or GNAAMP versions), then the use of `-gnatN` is deprecated, and the use of `-gnatn` is preferred. Historically front end inlining was more extensive than the gcc back end inlining, but that is no longer the case.

`-gnato??`
  Set default mode for handling generation of code to avoid intermediate arithmetic overflow. Here ``??`' is two digits, a single digit, or nothing. Each digit is one of the digits ``1`' through ``3`':
  - `1`: all intermediate overflows checked against base type (`STRICT`)
  - `2`: minimize intermediate overflows (`MINIMIZED`)
  - `3`: eliminate intermediate overflows (`ELIMINATED`)

  If only one digit appears then it applies to all cases; if two digits are given, then the first applies outside assertions, and the second within assertions.

  If no digits follow the `-gnato`, then it is equivalent to `-gnato11`, causing all intermediate overflows to be handled in strict mode.

  This switch also causes arithmetic overflow checking to be performed (as though pragma `Unsuppress (Overflow_Mode)` has been specified.

  The default if no option `-gnato` is given is that overflow handling is in `STRICT` mode (computations done using the base type), and that overflow checking is suppressed.

  Note that division by zero is a separate check that is not controlled by this switch (division by zero checking is on by default).

  See also Specifying the Desired Mode.

`-gnatp`
  Suppress all checks. See Run-Time Checks for details. This switch has no effect if cancelled by a subsequent `-gnat-p` switch.
`-gnat-p`
  Cancel effect of previous `-gnatp` switch.
`-gnatP`
  Enable polling. This is required on some systems (notably Windows NT) to obtain asynchronous abort and asynchronous transfer of control capability. See Pragma Polling, for full details.
`-gnatq`
  Don't quit. Try semantics, even if parse errors.
`-gnatQ`
  Don't quit. Generate `ALI` and tree files even if illegalities.
`-gnatr`
  Treat pragma Restrictions as Restriction_Warnings.
`-gnatR[0/1/2/3[s]]`
  Output representation information for declared types and objects.
`-gnats`
  Syntax check only.
`-gnatS`
  Print package Standard.
`-gnatt`
  Generate tree output file.
`-gnatTnnn`
  All compiler tables start at nnn times usual starting size.
`-gnatu`
  List units for this compilation.
`-gnatU`
  Tag all error messages with the unique string “error:”
`-gnatv`
  Verbose mode. Full error output with source lines to `stdout`.
`-gnatV`
  Control level of validity checking (see Validity Checking).
`-gnatwxxx`
  Warning mode where xxx is a string of option letters that denotes the exact warnings that are enabled or disabled (see Warning Message Control).
`-gnatWe`
  Wide character encoding method (e=n/h/u/s/e/8).
`-gnatx`
  Suppress generation of cross-reference information.
`-gnatX`
  Enable GNAT implementation extensions and latest Ada version.
`-gnaty`
  Enable built-in style checks (see Style Checking).
`-gnatzm`
  Distribution stub generation and compilation (m=r/c for receiver/caller stubs).
`-Idir`
  Direct GNAT to search the dir directory for source files needed by the current compilation (see Search Paths and the Run-Time Library (RTL)).
`-I-`
  Except for the source file named in the command line, do not look for source files in the directory containing the source file named in the command line (see Search Paths and the Run-Time Library (RTL)).
`-mbig-switch`
  This standard gcc switch causes the compiler to use larger offsets in its jump table representation for `case` statements. This may result in less efficient code, but is sometimes necessary (for example on HP-UX targets) in order to compile large and/or nested `case` statements.
`-o file`
  This switch is used in `gcc` to redirect the generated object file and its associated ALI file. Beware of this switch with GNAT, because it may cause the object file and ALI file to have different names which in turn may confuse the binder and the linker.
`-nostdinc`
  Inhibit the search of the default location for the GNAT Run Time Library (RTL) source files.
`-nostdlib`
  Inhibit the search of the default location for the GNAT Run Time Library (RTL) ALI files.
`-O[n]`
  n controls the optimization level.
  n = 0
    No optimization, the default setting if no `-O` appears
  n = 1
    Normal optimization, the default if you specify `-O` without an operand. A good compromise between code quality and compilation time.
  n = 2
    Extensive optimization, may improve execution time, possibly at the cost of substantially increased compilation time.
  n = 3
    Same as `-O2`, and also includes inline expansion for small subprograms in the same unit.
  n = s
    Optimize space usage

  See also Optimization Levels.

`-pass-exit-codes`
  Catch exit codes from the compiler and use the most meaningful as exit status.
`--RTS=rts-path`
  Specifies the default location of the runtime library. Same meaning as the equivalent `gnatmake` flag (see Switches for gnatmake).
`-S`
  Used in place of `-c` to cause the assembler source file to be generated, using `.s` as the extension, instead of the object file. This may be useful if you need to examine the generated assembly code.
`-fverbose-asm`
  Used in conjunction with `-S` to cause the generated assembly code file to be annotated with variable names, making it significantly easier to follow.
`-v`
  Show commands generated by the `gcc` driver. Normally used only for debugging purposes or if you need to be sure what version of the compiler you are executing.
`-V ver`
  Execute ver version of the compiler. This is the `gcc` version, not the GNAT version.
`-w`
  Turn off warnings generated by the back end of the compiler. Use of this switch also causes the default for front end warnings to be set to suppress (as though `-gnatws` had appeared at the start of the options).

You may combine a sequence of GNAT switches into a single switch. For example, the combined switch

         -gnatofi3

is equivalent to specifying the following sequence of switches:

         -gnato -gnatf -gnati3

The following restrictions apply to the combination of switches in this manner:

- The switch `-gnatc` if combined with other switches must come first in the string.
- The switch `-gnats` if combined with other switches must come first in the string.
- The switches

  `-gnatzc` and `-gnatzr` may not be combined with any other switches, and only one of them may appear in the command line.

- The switch `-gnat-p` may not be combined with any other switch.
- Once a “y” appears in the string (that is a use of the `-gnaty` switch), then all further characters in the switch are interpreted as style modifiers (see description of `-gnaty`).
- Once a “d” appears in the string (that is a use of the `-gnatd` switch), then all further characters in the switch are interpreted as debug flags (see description of `-gnatd`).
- Once a “w” appears in the string (that is a use of the `-gnatw` switch), then all further characters in the switch are interpreted as warning mode modifiers (see description of `-gnatw`).
- Once a “V” appears in the string (that is a use of the `-gnatV` switch), then all further characters in the switch are interpreted as validity checking options (see Validity Checking).
- Option “em”, “ec”, “ep”, “l=” and “R” must be the last options in a combined list of options.

Next: Warning Message Control, Up: Switches for gcc

#### 3.2.1 Output and Error Message Control

The standard default format for error messages is called “brief format”. Brief format messages are written to `stderr` (the standard error file) and have the following form:

         e.adb:3:04: Incorrect spelling of keyword "function"
         e.adb:4:20: ";" should be "is"

The first integer after the file name is the line number in the file, and the second integer is the column number within the line. `GPS` can parse the error messages and point to the referenced character. The following switches provide control over the error message format:

`-gnatv`
  The v stands for verbose. The effect of this setting is to write long-format error messages to `stdout` (the standard output file. The same program compiled with the `-gnatv` switch would generate:

                3. funcion X (Q : Integer)
                   |
                >>> Incorrect spelling of keyword "function"
                4. return Integer;
                                 |
                >>> ";" should be "is"

  The vertical bar indicates the location of the error, and the ‘`>>>`’ prefix can be used to search for error messages. When this switch is used the only source lines output are those with errors.

`-gnatl`
  The `l` stands for list. This switch causes a full listing of the file to be generated. In the case where a body is compiled, the corresponding spec is also listed, along with any subunits. Typical output from compiling a package body `p.adb` might look like:

                 Compiling: p.adb

                     1. package body p is
                     2.    procedure a;
                     3.    procedure a is separate;
                     4. begin
                     5.    null
                               |
                        >>> missing ";"

                     6. end;

                Compiling: p.ads

                     1. package p is
                     2.    pragma Elaborate_Body
                                                |
                        >>> missing ";"

                     3. end p;

                Compiling: p-a.adb

                     1. separate p
                                |
                        >>> missing "("

                     2. procedure a is
                     3. begin
                     4.    null
                               |
                        >>> missing ";"

                     5. end;

  When you specify the `-gnatv` or `-gnatl` switches and standard output is redirected, a brief summary is written to `stderr` (standard error) giving the number of error messages and warning messages generated.

`-gnatl=file`
  This has the same effect as `-gnatl` except that the output is written to a file instead of to standard output. If the given name `fname` does not start with a period, then it is the full name of the file to be written. If `fname` is an extension, it is appended to the name of the file being compiled. For example, if file `xyz.adb` is compiled with `-gnatl=.lst`, then the output is written to file xyz.adb.lst.
`-gnatU`
  This switch forces all error messages to be preceded by the unique string “error:”. This means that error messages take a few more characters in space, but allows easy searching for and identification of error messages.
`-gnatb`
  The `b` stands for brief. This switch causes GNAT to generate the brief format error messages to `stderr` (the standard error file) as well as the verbose format message or full listing (which as usual is written to `stdout` (the standard output file).
`-gnatm=n`
  The `m` stands for maximum. n is a decimal integer in the range of 1 to 999999 and limits the number of error or warning messages to be generated. For example, using `-gnatm2` might yield

                e.adb:3:04: Incorrect spelling of keyword "function"
                e.adb:5:35: missing ".."
                fatal error: maximum number of errors detected
                compilation abandoned

  The default setting if no switch is given is 9999. If the number of warnings reaches this limit, then a message is output and further warnings are suppressed, but the compilation is continued. If the number of error messages reaches this limit, then a message is output and the compilation is abandoned. A value of zero means that no limit applies.

  Note that the equal sign is optional, so the switches `-gnatm2` and `-gnatm=2` are equivalent.

`-gnatf`
  The `f` stands for full. Normally, the compiler suppresses error messages that are likely to be redundant. This switch causes all error messages to be generated. In particular, in the case of references to undefined variables. If a given variable is referenced several times, the normal format of messages is

                e.adb:7:07: "V" is undefined (more references follow)

  where the parenthetical comment warns that there are additional references to the variable `V`. Compiling the same program with the `-gnatf` switch yields

                e.adb:7:07: "V" is undefined
                e.adb:8:07: "V" is undefined
                e.adb:8:12: "V" is undefined
                e.adb:8:16: "V" is undefined
                e.adb:9:07: "V" is undefined
                e.adb:9:12: "V" is undefined

  The `-gnatf` switch also generates additional information for some error messages. Some examples are:

  - Details on possibly non-portable unchecked conversion
  - List possible interpretations for ambiguous calls
  - Additional details on incorrect parameters
`-gnatjnn`
  In normal operation mode (or if `-gnatj0` is used, then error messages with continuation lines are treated as though the continuation lines were separate messages (and so a warning with two continuation lines counts as three warnings, and is listed as three separate messages).

  If the `-gnatjnn` switch is used with a positive value for nn, then messages are output in a different manner. A message and all its continuation lines are treated as a unit, and count as only one warning or message in the statistics totals. Furthermore, the message is reformatted so that no line is longer than nn characters.

`-gnatq`
  The `q` stands for quit (really “don't quit”). In normal operation mode, the compiler first parses the program and determines if there are any syntax errors. If there are, appropriate error messages are generated and compilation is immediately terminated. This switch tells GNAT to continue with semantic analysis even if syntax errors have been found. This may enable the detection of more errors in a single run. On the other hand, the semantic analyzer is more likely to encounter some internal fatal error when given a syntactically invalid tree.
`-gnatQ`
  In normal operation mode, the `ALI` file is not generated if any illegalities are detected in the program. The use of `-gnatQ` forces generation of the `ALI` file. This file is marked as being in error, so it cannot be used for binding purposes, but it does contain reasonably complete cross-reference information, and thus may be useful for use by tools (e.g., semantic browsing tools or integrated development environments) that are driven from the `ALI` file. This switch implies `-gnatq`, since the semantic phase must be run to get a meaningful ALI file.

  In addition, if `-gnatt` is also specified, then the tree file is generated even if there are illegalities. It may be useful in this case to also specify `-gnatq` to ensure that full semantic processing occurs. The resulting tree file can be processed by ASIS, for the purpose of providing partial information about illegal units, but if the error causes the tree to be badly malformed, then ASIS may crash during the analysis.

  When `-gnatQ` is used and the generated `ALI` file is marked as being in error, `gnatmake` will attempt to recompile the source when it finds such an `ALI` file, including with switch `-gnatc`.

  Note that `-gnatQ` has no effect if `-gnats` is specified, since ALI files are never generated if `-gnats` is set.

Next: Debugging and Assertion Control, Previous: Output and Error Message Control, Up: Switches for gcc

#### 3.2.2 Warning Message Control

In addition to error messages, which correspond to illegalities as defined in the Ada Reference Manual, the compiler detects two kinds of warning situations.

First, the compiler considers some constructs suspicious and generates a warning message to alert you to a possible error. Second, if the compiler detects a situation that is sure to raise an exception at run time, it generates a warning message. The following shows an example of warning messages:

         e.adb:4:24: warning: creation of object may raise Storage_Error
         e.adb:10:17: warning: static value out of range
         e.adb:10:17: warning: "Constraint_Error" will be raised at run time

GNAT considers a large number of situations as appropriate for the generation of warning messages. As always, warnings are not definite indications of errors. For example, if you do an out-of-range assignment with the deliberate intention of raising a `Constraint_Error` exception, then the warning that may be issued does not indicate an error. Some of the situations for which GNAT issues warnings (at least some of the time) are given in the following list. This list is not complete, and new warnings are often added to subsequent versions of GNAT. The list is intended to give a general idea of the kinds of warnings that are generated.

- Possible infinitely recursive calls
- Out-of-range values being assigned
- Possible order of elaboration problems
- Assertions (pragma Assert) that are sure to fail
- Unreachable code
- Address clauses with possibly unaligned values, or where an attempt is made to overlay a smaller variable with a larger one.
- Fixed-point type declarations with a null range
- Direct_IO or Sequential_IO instantiated with a type that has access values
- Variables that are never assigned a value
- Variables that are referenced before being initialized
- Task entries with no corresponding `accept` statement
- Duplicate accepts for the same task entry in a `select`
- Objects that take too much storage
- Unchecked conversion between types of differing sizes
- Missing `return` statement along some execution path in a function
- Incorrect (unrecognized) pragmas
- Incorrect external names
- Allocation from empty storage pool
- Potentially blocking operation in protected type
- Suspicious parenthesization of expressions
- Mismatching bounds in an aggregate
- Attempt to return local value by reference
- Premature instantiation of a generic body
- Attempt to pack aliased components
- Out of bounds array subscripts
- Wrong length on string assignment
- Violations of style rules if style checking is enabled
- Unused `with` clauses
- `Bit_Order` usage that does not have any effect
- `Standard.Duration` used to resolve universal fixed expression
- Dereference of possibly null value
- Declaration that is likely to cause storage error
- Internal GNAT unit `with`'ed by application unit
- Values known to be out of range at compile time
- Unreferenced labels and variables
- Address overlays that could clobber memory
- Unexpected initialization when address clause present
- Bad alignment for address clause
- Useless type conversions
- Redundant assignment statements and other redundant constructs
- Useless exception handlers
- Accidental hiding of name by child unit
- Access before elaboration detected at compile time
- A range in a `for` loop that is known to be null or might be null

The following section lists compiler switches that are available to control the handling of warning messages. It is also possible to exercise much finer control over what warnings are issued and suppressed using the GNAT pragma Warnings, See Pragma Warnings.

`-gnatwa`
  Activate most optional warnings. This switch activates most optional warning messages. See the remaining list in this section for details on optional warning messages that can be individually controlled. The warnings that are not turned on by this switch are `-gnatwd` (implicit dereferencing), `-gnatwh` (hiding), `-gnatw.d` (tag warnings with -gnatw switch) `-gnatw.h` (holes (gaps) in record layouts) `-gnatw.i` (overlapping actuals), `-gnatw.k` (redefinition of names in standard), `-gnatwl` (elaboration warnings), `-gnatw.l` (inherited aspects), `-gnatw.o` (warn on values set by out parameters ignored), `-gnatwt` (tracking of deleted conditional code) and `-gnatw.u` (unordered enumeration), All other optional warnings are turned on.
`-gnatwA`
  Suppress all optional errors. This switch suppresses all optional warning messages, see remaining list in this section for details on optional warning messages that can be individually controlled. Note that unlike switch `-gnatws`, the use of switch `-gnatwA` does not suppress warnings that are normally given unconditionally and cannot be individually controlled (for example, the warning about a missing exit path in a function). Also, again unlike switch `-gnatws`, warnings suppressed by the use of switch `-gnatwA` can be individually turned back on. For example the use of switch `-gnatwA` followed by switch `-gnatwd` will suppress all optional warnings except the warnings for implicit dereferencing.
`-gnatw.a`
  Activate warnings on failing assertions. This switch activates warnings for assertions where the compiler can tell at compile time that the assertion will fail. Note that this warning is given even if assertions are disabled. The default is that such warnings are generated.
`-gnatw.A`
  Suppress warnings on failing assertions. This switch suppresses warnings for assertions where the compiler can tell at compile time that the assertion will fail.
`-gnatwb`
  Activate warnings on bad fixed values. This switch activates warnings for static fixed-point expressions whose value is not an exact multiple of Small. Such values are implementation dependent, since an implementation is free to choose either of the multiples that surround the value. GNAT always chooses the closer one, but this is not required behavior, and it is better to specify a value that is an exact multiple, ensuring predictable execution. The default is that such warnings are not generated.
`-gnatwB`
  Suppress warnings on bad fixed values. This switch suppresses warnings for static fixed-point expressions whose value is not an exact multiple of Small.
`-gnatw.b`
  Activate warnings on biased representation. This switch activates warnings when a size clause, value size clause, component clause, or component size clause forces the use of biased representation for an integer type (e.g. representing a range of 10..11 in a single bit by using 0/1 to represent 10/11). The default is that such warnings are generated.
`-gnatw.B`
  Suppress warnings on biased representation. This switch suppresses warnings for representation clauses that force the use of biased representation.
`-gnatwc`
  Activate warnings on conditionals. This switch activates warnings for conditional expressions used in tests that are known to be True or False at compile time. The default is that such warnings are not generated. Note that this warning does not get issued for the use of boolean variables or constants whose values are known at compile time, since this is a standard technique for conditional compilation in Ada, and this would generate too many false positive warnings.

  This warning option also activates a special test for comparisons using the operators “>=” and“ <=”. If the compiler can tell that only the equality condition is possible, then it will warn that the “>” or “<” part of the test is useless and that the operator could be replaced by “=”. An example would be comparing a `Natural` variable <= 0.

  This warning option also generates warnings if one or both tests is optimized away in a membership test for integer values if the result can be determined at compile time. Range tests on enumeration types are not included, since it is common for such tests to include an end point.

  This warning can also be turned on using `-gnatwa`.

`-gnatwC`
  Suppress warnings on conditionals. This switch suppresses warnings for conditional expressions used in tests that are known to be True or False at compile time.
`-gnatw.c`
  Activate warnings on missing component clauses. This switch activates warnings for record components where a record representation clause is present and has component clauses for the majority, but not all, of the components. A warning is given for each component for which no component clause is present.

  This warning can also be turned on using `-gnatwa`.

`-gnatw.C`
  Suppress warnings on missing component clauses. This switch suppresses warnings for record components that are missing a component clause in the situation described above.
`-gnatwd`
  Activate warnings on implicit dereferencing. If this switch is set, then the use of a prefix of an access type in an indexed component, slice, or selected component without an explicit `.all` will generate a warning. With this warning enabled, access checks occur only at points where an explicit `.all` appears in the source code (assuming no warnings are generated as a result of this switch). The default is that such warnings are not generated. Note that `-gnatwa` does not affect the setting of this warning option.
`-gnatwD`
  Suppress warnings on implicit dereferencing. This switch suppresses warnings for implicit dereferences in indexed components, slices, and selected components.
`-gnatw.d`
  Activate tagging of warning messages. If this switch is set, then warning messages are tagged, either with the string “`-gnatw?`” showing which switch controls the warning, or with “[enabled by default]” if the warning is not under control of a specific `-gnatw?` switch. This mode is off by default, and is not affected by the use of `-gnatwa`.
`-gnatw.D`
  Deactivate tagging of warning messages. If this switch is set, then warning messages return to the default mode in which warnings are not tagged as described above for `-gnatw.d`.
`-gnatwe`
  Treat warnings and style checks as errors. This switch causes warning messages and style check messages to be treated as errors. The warning string still appears, but the warning messages are counted as errors, and prevent the generation of an object file. Note that this is the only -gnatw switch that affects the handling of style check messages.
`-gnatw.e`
  Activate every optional warning This switch activates all optional warnings, including those which are not activated by `-gnatwa`. The use of this switch is not recommended for normal use. If you turn this switch on, it is almost certain that you will get large numbers of useless warnings. The warnings that are excluded from `-gnatwa` are typically highly specialized warnings that are suitable for use only in code that has been specifically designed according to specialized coding rules.
`-gnatwf`
  Activate warnings on unreferenced formals. This switch causes a warning to be generated if a formal parameter is not referenced in the body of the subprogram. This warning can also be turned on using `-gnatwa` or `-gnatwu`. The default is that these warnings are not generated.
`-gnatwF`
  Suppress warnings on unreferenced formals. This switch suppresses warnings for unreferenced formal parameters. Note that the combination `-gnatwu` followed by `-gnatwF` has the effect of warning on unreferenced entities other than subprogram formals.
`-gnatwg`
  Activate warnings on unrecognized pragmas. This switch causes a warning to be generated if an unrecognized pragma is encountered. Apart from issuing this warning, the pragma is ignored and has no effect. This warning can also be turned on using `-gnatwa`. The default is that such warnings are issued (satisfying the Ada Reference Manual requirement that such warnings appear).
`-gnatwG`
  Suppress warnings on unrecognized pragmas. This switch suppresses warnings for unrecognized pragmas.
`-gnatwh`
  Activate warnings on hiding. This switch activates warnings on hiding declarations. A declaration is considered hiding if it is for a non-overloadable entity, and it declares an entity with the same name as some other entity that is directly or use-visible. The default is that such warnings are not generated. Note that `-gnatwa` does not affect the setting of this warning option.
`-gnatwH`
  Suppress warnings on hiding. This switch suppresses warnings on hiding declarations.
`-gnatw.h`
  Activate warnings on holes/gaps in records. This switch activates warnings on component clauses in record representation clauses that leave holes (gaps) in the record layout. If this warning option is active, then record representation clauses should specify a contiguous layout, adding unused fill fields if needed. Note that `-gnatwa` does not affect the setting of this warning option.
`-gnatw.H`
  Suppress warnings on holes/gaps in records. This switch suppresses warnings on component clauses in record representation clauses that leave holes (haps) in the record layout.
`-gnatwi`
  Activate warnings on implementation units. This switch activates warnings for a `with` of an internal GNAT implementation unit, defined as any unit from the `Ada`, `Interfaces`, `GNAT`, or `System` hierarchies that is not documented in either the Ada Reference Manual or the GNAT Programmer's Reference Manual. Such units are intended only for internal implementation purposes and should not be `with`'ed by user programs. The default is that such warnings are generated This warning can also be turned on using `-gnatwa`.
`-gnatwI`
  Disable warnings on implementation units. This switch disables warnings for a `with` of an internal GNAT implementation unit.
`-gnatw.i`
  Activate warnings on overlapping actuals. This switch enables a warning on statically detectable overlapping actuals in a subprogram call, when one of the actuals is an in-out parameter, and the types of the actuals are not by-copy types. The warning is off by default, and is not included under -gnatwa.
`-gnatw.I`
  Disable warnings on overlapping actuals. This switch disables warnings on overlapping actuals in a call..
`-gnatwj`
  Activate warnings on obsolescent features (Annex J). If this warning option is activated, then warnings are generated for calls to subprograms marked with `pragma Obsolescent` and for use of features in Annex J of the Ada Reference Manual. In the case of Annex J, not all features are flagged. In particular use of the renamed packages (like `Text_IO`) and use of package `ASCII` are not flagged, since these are very common and would generate many annoying positive warnings. The default is that such warnings are not generated. This warning is also turned on by the use of `-gnatwa`.

  In addition to the above cases, warnings are also generated for GNAT features that have been provided in past versions but which have been superseded (typically by features in the new Ada standard). For example, `pragma Ravenscar` will be flagged since its function is replaced by `pragma Profile(Ravenscar)`, and `pragma Interface_Name` will be flagged since its function is replaced by `pragma Import`.

  Note that this warning option functions differently from the restriction `No_Obsolescent_Features` in two respects. First, the restriction applies only to annex J features. Second, the restriction does flag uses of package `ASCII`.

`-gnatwJ`
  Suppress warnings on obsolescent features (Annex J). This switch disables warnings on use of obsolescent features.
`-gnatwk`
  Activate warnings on variables that could be constants. This switch activates warnings for variables that are initialized but never modified, and then could be declared constants. The default is that such warnings are not given. This warning can also be turned on using `-gnatwa`.
`-gnatwK`
  Suppress warnings on variables that could be constants. This switch disables warnings on variables that could be declared constants.
`-gnatw.k`
  Activate warnings on redefinition of names in standard. This switch activates warnings for declarations that declare a name that is defined in package Standard. Such declarations can be confusing, especially since the names in package Standard continue to be directly visible, meaning that use visibiliy on such redeclared names does not work as expected. Names of discriminants and components in records are not included in this check. This warning is not part of the warnings activated by `-gnatwa`. It must be explicitly activated.
`-gnatw.K`
  Suppress warnings on variables that could be constants. This switch activates warnings for declarations that declare a name that is defined in package Standard.
`-gnatwl`
  Activate warnings for elaboration pragmas. This switch activates warnings on missing `Elaborate_All` and `Elaborate` pragmas. See the section in this guide on elaboration checking for details on when such pragmas should be used. In dynamic elaboration mode, this switch generations warnings about the need to add elaboration pragmas. Note however, that if you blindly follow these warnings, and add `Elaborate_All` warnings wherever they are recommended, you basically end up with the equivalent of the static elaboration model, which may not be what you want for legacy code for which the static model does not work.

  For the static model, the messages generated are labeled "info:" (for information messages). They are not warnings to add elaboration pragmas, merely informational messages showing what implicit elaboration pragmas have been added, for use in analyzing elaboration circularity problems.

  Warnings are also generated if you are using the static mode of elaboration, and a `pragma Elaborate` is encountered. The default is that such warnings are not generated. This warning is not automatically turned on by the use of `-gnatwa`.

`-gnatwL`
  Suppress warnings for elaboration pragmas. This switch suppresses warnings on missing Elaborate and Elaborate_All pragmas. See the section in this guide on elaboration checking for details on when such pragmas should be used.
`-gnatw.l`
  List inherited aspects. This switch causes the compiler to list inherited invariants, preconditions, and postconditions from Type_Invariant'Class, Invariant'Class, Pre'Class, and Post'Class aspects. Also list inherited subtype predicates. These messages are not automatically turned on by the use of `-gnatwa`.
`-gnatw.L`
  Suppress listing of inherited aspects. This switch suppresses listing of inherited aspects.
`-gnatwm`
  Activate warnings on modified but unreferenced variables. This switch activates warnings for variables that are assigned (using an initialization value or with one or more assignment statements) but whose value is never read. The warning is suppressed for volatile variables and also for variables that are renamings of other variables or for which an address clause is given. This warning can also be turned on using `-gnatwa`. The default is that these warnings are not given.
`-gnatwM`
  Disable warnings on modified but unreferenced variables. This switch disables warnings for variables that are assigned or initialized, but never read.
`-gnatw.m`
  Activate warnings on suspicious modulus values. This switch activates warnings for modulus values that seem suspicious. The cases caught are where the size is the same as the modulus (e.g. a modulus of 7 with a size of 7 bits), and modulus values of 32 or 64 with no size clause. The guess in both cases is that 2**x was intended rather than x. In addition expressions of the form 2*x for small x generate a warning (the almost certainly accurate guess being that 2**x was intended). The default is that these warnings are given.
`-gnatw.M`
  Disable warnings on suspicious modulus values. This switch disables warnings for suspicious modulus values.
`-gnatwn`
  Set normal warnings mode. This switch sets normal warning mode, in which enabled warnings are issued and treated as warnings rather than errors. This is the default mode. the switch `-gnatwn` can be used to cancel the effect of an explicit `-gnatws` or `-gnatwe`. It also cancels the effect of the implicit `-gnatwe` that is activated by the use of `-gnatg`.
`-gnatwo`
  Activate warnings on address clause overlays. This switch activates warnings for possibly unintended initialization effects of defining address clauses that cause one variable to overlap another. The default is that such warnings are generated. This warning can also be turned on using `-gnatwa`.
`-gnatwO`
  Suppress warnings on address clause overlays. This switch suppresses warnings on possibly unintended initialization effects of defining address clauses that cause one variable to overlap another.
`-gnatw.o`
  Activate warnings on modified but unreferenced out parameters. This switch activates warnings for variables that are modified by using them as actuals for a call to a procedure with an out mode formal, where the resulting assigned value is never read. It is applicable in the case where there is more than one out mode formal. If there is only one out mode formal, the warning is issued by default (controlled by -gnatwu). The warning is suppressed for volatile variables and also for variables that are renamings of other variables or for which an address clause is given. The default is that these warnings are not given. Note that this warning is not included in -gnatwa, it must be activated explicitly.
`-gnatw.O`
  Disable warnings on modified but unreferenced out parameters. This switch suppresses warnings for variables that are modified by using them as actuals for a call to a procedure with an out mode formal, where the resulting assigned value is never read.
`-gnatwp`
  Activate warnings on ineffective pragma Inlines. This switch activates warnings for failure of front end inlining (activated by `-gnatN`) to inline a particular call. There are many reasons for not being able to inline a call, including most commonly that the call is too complex to inline. The default is that such warnings are not given. This warning can also be turned on using `-gnatwa`. Warnings on ineffective inlining by the gcc back-end can be activated separately, using the gcc switch -Winline.
`-gnatwP`
  Suppress warnings on ineffective pragma Inlines. This switch suppresses warnings on ineffective pragma Inlines. If the inlining mechanism cannot inline a call, it will simply ignore the request silently.
`-gnatw.p`
  Activate warnings on parameter ordering. This switch activates warnings for cases of suspicious parameter ordering when the list of arguments are all simple identifiers that match the names of the formals, but are in a different order. The warning is suppressed if any use of named parameter notation is used, so this is the appropriate way to suppress a false positive (and serves to emphasize that the "misordering" is deliberate). The default is that such warnings are not given. This warning can also be turned on using `-gnatwa`.
`-gnatw.P`
  Suppress warnings on parameter ordering. This switch suppresses warnings on cases of suspicious parameter ordering.
`-gnatwq`
  Activate warnings on questionable missing parentheses. This switch activates warnings for cases where parentheses are not used and the result is potential ambiguity from a readers point of view. For example (not a > b) when a and b are modular means ((not a) > b) and very likely the programmer intended (not (a > b)). Similarly (-x mod 5) means (-(x mod 5)) and quite likely ((-x) mod 5) was intended. In such situations it seems best to follow the rule of always parenthesizing to make the association clear, and this warning switch warns if such parentheses are not present. The default is that these warnings are given. This warning can also be turned on using `-gnatwa`.
`-gnatwQ`
  Suppress warnings on questionable missing parentheses. This switch suppresses warnings for cases where the association is not clear and the use of parentheses is preferred.
`-gnatwr`
  Activate warnings on redundant constructs. This switch activates warnings for redundant constructs. The following is the current list of constructs regarded as redundant:
  - Assignment of an item to itself.
  - Type conversion that converts an expression to its own type.
  - Use of the attribute `Base` where `typ'Base` is the same as `typ`.
  - Use of pragma `Pack` when all components are placed by a record representation clause.
  - Exception handler containing only a reraise statement (raise with no operand) which has no effect.
  - Use of the operator abs on an operand that is known at compile time to be non-negative
  - Comparison of boolean expressions to an explicit True value.

  This warning can also be turned on using `-gnatwa`. The default is that warnings for redundant constructs are not given.

`-gnatwR`
  Suppress warnings on redundant constructs. This switch suppresses warnings for redundant constructs.
`-gnatw.r`
  Activate warnings for object renaming function. This switch activates warnings for an object renaming that renames a function call, which is equivalent to a constant declaration (as opposed to renaming the function itself). The default is that these warnings are given. This warning can also be turned on using `-gnatwa`.
`-gnatw.R`
  Suppress warnings for object renaming function. This switch suppresses warnings for object renaming function.
`-gnatws`
  Suppress all warnings. This switch completely suppresses the output of all warning messages from the GNAT front end, including both warnings that can be controlled by switches described in this section, and those that are normally given unconditionally. The effect of this suppress action can only be cancelled by a subsequent use of the switch `-gnatwn`.

  Note that switch `-gnatws` does not suppress warnings from the `gcc` back end. To suppress these back end warnings as well, use the switch `-w` in addition to `-gnatws`. Also this switch has no effect on the handling of style check messages.

`-gnatw.s`
  Activate warnings on overridden size clauses. This switch activates warnings on component clauses in record representation clauses where the length given overrides that specified by an explicit size clause for the component type. A warning is similarly given in the array case if a specified component size overrides an explicit size clause for the array component type. Note that `-gnatwa` does not affect the setting of this warning option.
`-gnatw.S`
  Suppress warnings on overridden size clauses. This switch suppresses warnings on component clauses in record representation clauses that override size clauses, and similar warnings when an array component size overrides a size clause.
`-gnatwt`
  Activate warnings for tracking of deleted conditional code. This switch activates warnings for tracking of code in conditionals (IF and CASE statements) that is detected to be dead code which cannot be executed, and which is removed by the front end. This warning is off by default, and is not turned on by `-gnatwa`, it has to be turned on explicitly. This may be useful for detecting deactivated code in certified applications.
`-gnatwT`
  Suppress warnings for tracking of deleted conditional code. This switch suppresses warnings for tracking of deleted conditional code.
`-gnatw.t`
  Activate warnings on suspicious contracts. This switch activates warnings on suspicious postconditions (whether a pragma `Postcondition` or a `Post` aspect in Ada 2012) and suspicious contract cases (pragma `Contract_Case`). A function postcondition or contract case is suspicious when no postcondition or contract case for this function mentions the result of the function. A procedure postcondition or contract case is suspicious when it only refers to the pre-state of the procedure, because in that case it should rather be expressed as a precondition. The default is that such warnings are not generated. This warning can also be turned on using `-gnatwa`.
`-gnatw.T`
  Suppress warnings on suspicious contracts. This switch suppresses warnings on suspicious postconditions.
`-gnatwu`
  Activate warnings on unused entities. This switch activates warnings to be generated for entities that are declared but not referenced, and for units that are `with`'ed and not referenced. In the case of packages, a warning is also generated if no entities in the package are referenced. This means that if a with'ed package is referenced but the only references are in `use` clauses or `renames` declarations, a warning is still generated. A warning is also generated for a generic package that is `with`'ed but never instantiated. In the case where a package or subprogram body is compiled, and there is a `with` on the corresponding spec that is only referenced in the body, a warning is also generated, noting that the `with` can be moved to the body. The default is that such warnings are not generated. This switch also activates warnings on unreferenced formals (it includes the effect of `-gnatwf`). This warning can also be turned on using `-gnatwa`.
`-gnatwU`
  Suppress warnings on unused entities. This switch suppresses warnings for unused entities and packages. It also turns off warnings on unreferenced formals (and thus includes the effect of `-gnatwF`).
`-gnatw.u`
  Activate warnings on unordered enumeration types. This switch causes enumeration types to be considered as conceptually unordered, unless an explicit pragma `Ordered` is given for the type. The effect is to generate warnings in clients that use explicit comparisons or subranges, since these constructs both treat objects of the type as ordered. (A client is defined as a unit that is other than the unit in which the type is declared, or its body or subunits.) Please refer to the description of pragma `Ordered` in the GNAT Reference Manual for further details. The default is that such warnings are not generated. This warning is not automatically turned on by the use of `-gnatwa`.
`-gnatw.U`
  Deactivate warnings on unordered enumeration types. This switch causes all enumeration types to be considered as ordered, so that no warnings are given for comparisons or subranges for any type.
`-gnatwv`
  Activate warnings on unassigned variables. This switch activates warnings for access to variables which may not be properly initialized. The default is that such warnings are generated. This warning can also be turned on using `-gnatwa`.
`-gnatwV`
  Suppress warnings on unassigned variables. This switch suppresses warnings for access to variables which may not be properly initialized. For variables of a composite type, the warning can also be suppressed in Ada 2005 by using a default initialization with a box. For example, if Table is an array of records whose components are only partially uninitialized, then the following code:

                   Tab : Table := (others => <>);

  will suppress warnings on subsequent statements that access components of variable Tab.

`-gnatw.v`
  Activate info messages for non-default bit order. This switch activates messages (labeled "info", they are not warnings, just informational messages) about the effects of non-default bit-order on records to which a component clause is applied. The effect of specifying non-default bit ordering is a bit subtle (and changed with Ada 2005), so these messages, which are given by default, are useful in understanding the exact consequences of using this feature. These messages can also be turned on using `-gnatwa`
`-gnatw.V`
  Suppress info messages for non-default bit order. This switch suppresses information messages for the effects of specifying non-default bit order on record components with component clauses.
`-gnatww`
  Activate warnings on wrong low bound assumption. This switch activates warnings for indexing an unconstrained string parameter with a literal or S'Length. This is a case where the code is assuming that the low bound is one, which is in general not true (for example when a slice is passed). The default is that such warnings are generated. This warning can also be turned on using `-gnatwa`.
`-gnatwW`
  Suppress warnings on wrong low bound assumption. This switch suppresses warnings for indexing an unconstrained string parameter with a literal or S'Length. Note that this warning can also be suppressed in a particular case by adding an assertion that the lower bound is 1, as shown in the following example.

                   procedure K (S : String) is
                      pragma Assert (S'First = 1);
                      ...

`-gnatw.w`
  Activate warnings on unnecessary Warnings Off pragmas This switch activates warnings for use of `pragma Warnings (Off, entity)` where either the pragma is entirely useless (because it suppresses no warnings), or it could be replaced by `pragma Unreferenced` or `pragma Unmodified`. The default is that these warnings are not given. Note that this warning is not included in -gnatwa, it must be activated explicitly.
`-gnatw.W`
  Suppress warnings on unnecessary Warnings Off pragmas This switch suppresses warnings for use of `pragma Warnings (Off, entity)`.
`-gnatwx`
  Activate warnings on Export/Import pragmas. This switch activates warnings on Export/Import pragmas when the compiler detects a possible conflict between the Ada and foreign language calling sequences. For example, the use of default parameters in a convention C procedure is dubious because the C compiler cannot supply the proper default, so a warning is issued. The default is that such warnings are generated. This warning can also be turned on using `-gnatwa`.
`-gnatwX`
  Suppress warnings on Export/Import pragmas. This switch suppresses warnings on Export/Import pragmas. The sense of this is that you are telling the compiler that you know what you are doing in writing the pragma, and it should not complain at you.
`-gnatw.x`
  Activate warnings for No_Exception_Propagation mode. This switch activates warnings for exception usage when pragma Restrictions (No_Exception_Propagation) is in effect. Warnings are given for implicit or explicit exception raises which are not covered by a local handler, and for exception handlers which do not cover a local raise. The default is that these warnings are not given.
`-gnatw.X`
  Disable warnings for No_Exception_Propagation mode. This switch disables warnings for exception usage when pragma Restrictions (No_Exception_Propagation) is in effect.
`-gnatwy`
  Activate warnings for Ada compatibility issues. For the most part, newer versions of Ada are upwards compatible with older versions. For example, Ada 2005 programs will almost always work when compiled as Ada 2012. However there are some exceptions (for example the fact that `some` is now a reserved word in Ada 2012). This switch activates several warnings to help in identifying and correcting such incompatibilities. The default is that these warnings are generated. Note that at one point Ada 2005 was called Ada 0Y, hence the choice of character. This warning can also be turned on using `-gnatwa`.
`-gnatwY`
  Disable warnings for Ada compatibility issues. This switch suppresses the warnings intended to help in identifying incompatibilities between Ada language versions.
`-gnatwz`
  Activate warnings on unchecked conversions. This switch activates warnings for unchecked conversions where the types are known at compile time to have different sizes. The default is that such warnings are generated. Warnings are also generated for subprogram pointers with different conventions, and, on VMS only, for data pointers with different conventions. This warning can also be turned on using `-gnatwa`.
`-gnatwZ`
  Suppress warnings on unchecked conversions. This switch suppresses warnings for unchecked conversions where the types are known at compile time to have different sizes or conventions.
`-Wunused`
  The warnings controlled by the `-gnatw` switch are generated by the front end of the compiler. The `GCC` back end can provide additional warnings and they are controlled by the `-W` switch. For example, `-Wunused` activates back end warnings for entities that are declared but not referenced.
`-Wuninitialized`
  Similarly, `-Wuninitialized` activates the back end warning for uninitialized variables. This switch must be used in conjunction with an optimization level greater than zero.
`-Wstack-usage=len`
  Warn if the stack usage of a subprogram might be larger than len bytes. See Static Stack Usage Analysis for details.
`-Wall`
  This switch enables most warnings from the `GCC` back end. The code generator detects a number of warning situations that are missed by the `GNAT` front end, and this switch can be used to activate them. The use of this switch also sets the default front end warning mode to `-gnatwa`, that is, most front end warnings activated as well.
`-w`
  Conversely, this switch suppresses warnings from the `GCC` back end. The use of this switch also sets the default front end warning mode to `-gnatws`, that is, front end warnings suppressed as well.

A string of warning parameters can be used in the same parameter. For example:

         -gnatwaGe

will turn on all optional warnings except for unrecognized pragma warnings, and also specify that warnings should be treated as errors.

When no switch `-gnatw` is used, this is equivalent to:

`-gnatw.a`
`-gnatwB`
`-gnatw.b`
`-gnatwC`
`-gnatw.C`
`-gnatwD`
`-gnatwF`
`-gnatwg`
`-gnatwH`
`-gnatwi`
`-gnatw.I`
`-gnatwJ`
`-gnatwK`
`-gnatwL`
`-gnatw.L`
`-gnatwM`
`-gnatw.m`
`-gnatwn`
`-gnatwo`
`-gnatw.O`
`-gnatwP`
`-gnatw.P`
`-gnatwq`
`-gnatwR`
`-gnatw.R`
`-gnatw.S`
`-gnatwT`
`-gnatw.T`
`-gnatwU`
`-gnatwv`
`-gnatww`
`-gnatw.W`
`-gnatwx`
`-gnatw.X`
`-gnatwy`
`-gnatwz`

Next: Validity Checking, Previous: Warning Message Control, Up: Switches for gcc

#### 3.2.3 Debugging and Assertion Control

`-gnata`
  The pragmas `Assert` and `Debug` normally have no effect and are ignored. This switch, where ‘`a`’ stands for assert, causes `Assert` and `Debug` pragmas to be activated.

  The pragmas have the form:

                   pragma Assert (Boolean-expression [,
                                      static-string-expression])
                   pragma Debug (procedure call)

  The `Assert` pragma causes Boolean-expression to be tested. If the result is `True`, the pragma has no effect (other than possible side effects from evaluating the expression). If the result is `False`, the exception `Assert_Failure` declared in the package `System.Assertions` is raised (passing static-string-expression, if present, as the message associated with the exception). If no string expression is given the default is a string giving the file name and line number of the pragma.

  The `Debug` pragma causes procedure to be called. Note that `pragma Debug` may appear within a declaration sequence, allowing debugging procedures to be called between declarations.

Next: Style Checking, Previous: Debugging and Assertion Control, Up: Switches for gcc

#### 3.2.4 Validity Checking

The Ada Reference Manual defines the concept of invalid values (see RM 13.9.1). The primary source of invalid values is uninitialized variables. A scalar variable that is left uninitialized may contain an invalid value; the concept of invalid does not apply to access or composite types.

It is an error to read an invalid value, but the RM does not require run-time checks to detect such errors, except for some minimal checking to prevent erroneous execution (i.e. unpredictable behavior). This corresponds to the `-gnatVd` switch below, which is the default. For example, by default, if the expression of a case statement is invalid, it will raise Constraint_Error rather than causing a wild jump, and if an array index on the left-hand side of an assignment is invalid, it will raise Constraint_Error rather than overwriting an arbitrary memory location.

The `-gnatVa` may be used to enable additional validity checks, which are not required by the RM. These checks are often very expensive (which is why the RM does not require them). These checks are useful in tracking down uninitialized variables, but they are not usually recommended for production builds.

The other `-gnatVx` switches below allow finer-grained control; you can enable whichever validity checks you desire. However, for most debugging purposes, `-gnatVa` is sufficient, and the default `-gnatVd` (i.e. standard Ada behavior) is usually sufficient for non-debugging use.

The `-gnatB` switch tells the compiler to assume that all values are valid (that is, within their declared subtype range) except in the context of a use of the Valid attribute. This means the compiler can generate more efficient code, since the range of values is better known at compile time. However, an uninitialized variable can cause wild jumps and memory corruption in this mode.

The `-gnatVx` switch allows control over the validity checking mode as described below. The `x` argument is a string of letters that indicate validity checks that are performed or not performed in addition to the default checks required by Ada as described above.

`-gnatVa`
  All validity checks. All validity checks are turned on. That is, `-gnatVa` is equivalent to `gnatVcdfimorst`.
`-gnatVc`
  Validity checks for copies. The right hand side of assignments, and the initializing values of object declarations are validity checked.
`-gnatVd`
  Default (RM) validity checks. Some validity checks are done by default following normal Ada semantics (RM 13.9.1 (9-11)). A check is done in case statements that the expression is within the range of the subtype. If it is not, Constraint_Error is raised. For assignments to array components, a check is done that the expression used as index is within the range. If it is not, Constraint_Error is raised. Both these validity checks may be turned off using switch `-gnatVD`. They are turned on by default. If `-gnatVD` is specified, a subsequent switch `-gnatVd` will leave the checks turned on. Switch `-gnatVD` should be used only if you are sure that all such expressions have valid values. If you use this switch and invalid values are present, then the program is erroneous, and wild jumps or memory overwriting may occur.
`-gnatVe`
  Validity checks for elementary components. In the absence of this switch, assignments to record or array components are not validity checked, even if validity checks for assignments generally (`-gnatVc`) are turned on. In Ada, assignment of composite values do not require valid data, but assignment of individual components does. So for example, there is a difference between copying the elements of an array with a slice assignment, compared to assigning element by element in a loop. This switch allows you to turn off validity checking for components, even when they are assigned component by component.
`-gnatVf`
  Validity checks for floating-point values. In the absence of this switch, validity checking occurs only for discrete values. If `-gnatVf` is specified, then validity checking also applies for floating-point values, and NaNs and infinities are considered invalid, as well as out of range values for constrained types. Note that this means that standard IEEE infinity mode is not allowed. The exact contexts in which floating-point values are checked depends on the setting of other options. For example, `-gnatVif` or `-gnatVfi` (the order does not matter) specifies that floating-point parameters of mode `in` should be validity checked.
`-gnatVi`
  Validity checks for `in` mode parameters Arguments for parameters of mode `in` are validity checked in function and procedure calls at the point of call.
`-gnatVm`
  Validity checks for `in out` mode parameters. Arguments for parameters of mode `in out` are validity checked in procedure calls at the point of call. The `'m'` here stands for modify, since this concerns parameters that can be modified by the call. Note that there is no specific option to test `out` parameters, but any reference within the subprogram will be tested in the usual manner, and if an invalid value is copied back, any reference to it will be subject to validity checking.
`-gnatVn`
  No validity checks. This switch turns off all validity checking, including the default checking for case statements and left hand side subscripts. Note that the use of the switch `-gnatp` suppresses all run-time checks, including validity checks, and thus implies `-gnatVn`. When this switch is used, it cancels any other `-gnatV` previously issued.
`-gnatVo`
  Validity checks for operator and attribute operands. Arguments for predefined operators and attributes are validity checked. This includes all operators in package `Standard`, the shift operators defined as intrinsic in package `Interfaces` and operands for attributes such as `Pos`. Checks are also made on individual component values for composite comparisons, and on the expressions in type conversions and qualified expressions. Checks are also made on explicit ranges using ‘`..`’ (e.g. slices, loops etc).
`-gnatVp`
  Validity checks for parameters. This controls the treatment of parameters within a subprogram (as opposed to `-gnatVi` and `-gnatVm` which control validity testing of parameters on a call. If either of these call options is used, then normally an assumption is made within a subprogram that the input arguments have been validity checking at the point of call, and do not need checking again within a subprogram). If `-gnatVp` is set, then this assumption is not made, and parameters are not assumed to be valid, so their validity will be checked (or rechecked) within the subprogram.
`-gnatVr`
  Validity checks for function returns. The expression in `return` statements in functions is validity checked.
`-gnatVs`
  Validity checks for subscripts. All subscripts expressions are checked for validity, whether they appear on the right side or left side (in default mode only left side subscripts are validity checked).
`-gnatVt`
  Validity checks for tests. Expressions used as conditions in `if`, `while` or `exit` statements are checked, as well as guard expressions in entry calls.

The `-gnatV` switch may be followed by a string of letters to turn on a series of validity checking options. For example, `-gnatVcr` specifies that in addition to the default validity checking, copies and function return expressions are to be validity checked. In order to make it easier to specify the desired combination of effects, the upper case letters `CDFIMORST` may be used to turn off the corresponding lower case option. Thus `-gnatVaM` turns on all validity checking options except for checking of in out procedure arguments.

The specification of additional validity checking generates extra code (and in the case of `-gnatVa` the code expansion can be substantial). However, these additional checks can be very useful in detecting uninitialized variables, incorrect use of unchecked conversion, and other errors leading to invalid values. The use of pragma `Initialize_Scalars` is useful in conjunction with the extra validity checking, since this ensures that wherever possible uninitialized variables have invalid values.

See also the pragma `Validity_Checks` which allows modification of the validity checking mode at the program source level, and also allows for temporary disabling of validity checks.

Next: Run-Time Checks, Previous: Validity Checking, Up: Switches for gcc

#### 3.2.5 Style Checking

The `-gnatyx` switch causes the compiler to enforce specified style rules. A limited set of style rules has been used in writing the GNAT sources themselves. This switch allows user programs to activate all or some of these checks. If the source program fails a specified style check, an appropriate message is given, preceded by the character sequence “(style)”. This message does not prevent successful compilation (unless the `-gnatwe` switch is used).

Note that this is by no means intended to be a general facility for checking arbitrary coding standards. It is simply an embedding of the style rules we have chosen for the GNAT sources. If you are starting a project which does not have established style standards, you may find it useful to adopt the entire set of GNAT coding standards, or some subset of them. If you already have an established set of coding standards, then it may be that selected style checking options do indeed correspond to choices you have made, but for general checking of an existing set of coding rules, you should look to the gnatcheck tool, which is designed for that purpose.

The string x is a sequence of letters or digits indicating the particular style checks to be performed. The following checks are defined:

`0-9`
  Specify indentation level. If a digit from 1-9 appears in the string after `-gnaty` then proper indentation is checked, with the digit indicating the indentation level required. A value of zero turns off this style check. The general style of required indentation is as specified by the examples in the Ada Reference Manual. Full line comments must be aligned with the `--` starting on a column that is a multiple of the alignment level, or they may be aligned the same way as the following non-blank line (this is useful when full line comments appear in the middle of a statement.
`a`
  Check attribute casing. Attribute names, including the case of keywords such as `digits` used as attributes names, must be written in mixed case, that is, the initial letter and any letter following an underscore must be uppercase. All other letters must be lowercase.
`A`
  Use of array index numbers in array attributes. When using the array attributes First, Last, Range, or Length, the index number must be omitted for one-dimensional arrays and is required for multi-dimensional arrays.
`b`
  Blanks not allowed at statement end. Trailing blanks are not allowed at the end of statements. The purpose of this rule, together with h (no horizontal tabs), is to enforce a canonical format for the use of blanks to separate source tokens.
`B`
  Check Boolean operators. The use of AND/OR operators is not permitted except in the cases of modular operands, array operands, and simple stand-alone boolean variables or boolean constants. In all other cases `and then`/`or else` are required.
`c`
  Check comments, double space. Comments must meet the following set of rules:
  - The “`--`” that starts the column must either start in column one, or else at least one blank must precede this sequence.
  - Comments that follow other tokens on a line must have at least one blank following the “`--`” at the start of the comment.
  - Full line comments must have at least two blanks following the “`--`” that starts the comment, with the following exceptions.
  - A line consisting only of the “`--`” characters, possibly preceded by blanks is permitted.
  - A comment starting with “`--x`” where `x` is a special character is permitted. This allows proper processing of the output generated by specialized tools including `gnatprep` (where “`--!`” is used) and the SPARK annotation language (where “`--#`” is used). For the purposes of this rule, a special character is defined as being in one of the ASCII ranges `16#21#...16#2F#` or `16#3A#...16#3F#`. Note that this usage is not permitted in GNAT implementation units (i.e., when `-gnatg` is used).
  - A line consisting entirely of minus signs, possibly preceded by blanks, is permitted. This allows the construction of box comments where lines of minus signs are used to form the top and bottom of the box.
  - A comment that starts and ends with “`--`” is permitted as long as at least one blank follows the initial “`--`”. Together with the preceding rule, this allows the construction of box comments, as shown in the following example:

                       ---------------------------
                       -- This is a box comment --
                       -- with two text lines.  --
                       ---------------------------

`C`
  Check comments, single space. This is identical to `c` except that only one space is required following the `--` of a comment instead of two.
`d`
  Check no DOS line terminators present. All lines must be terminated by a single ASCII.LF character (in particular the DOS line terminator sequence CR/LF is not allowed).
`e`
  Check end/exit labels. Optional labels on `end` statements ending subprograms and on `exit` statements exiting named loops, are required to be present.
`f`
  No form feeds or vertical tabs. Neither form feeds nor vertical tab characters are permitted in the source text.
`g`
  GNAT style mode. The set of style check switches is set to match that used by the GNAT sources. This may be useful when developing code that is eventually intended to be incorporated into GNAT. For further details, see GNAT sources.
`h`
  No horizontal tabs. Horizontal tab characters are not permitted in the source text. Together with the b (no blanks at end of line) check, this enforces a canonical form for the use of blanks to separate source tokens.
`i`
  Check if-then layout. The keyword `then` must appear either on the same line as corresponding `if`, or on a line on its own, lined up under the `if` with at least one non-blank line in between containing all or part of the condition to be tested.
`I`
  check mode IN keywords. Mode `in` (the default mode) is not allowed to be given explicitly. `in out` is fine, but not `in` on its own.
`k`
  Check keyword casing. All keywords must be in lower case (with the exception of keywords such as `digits` used as attribute names to which this check does not apply).
`l`
  Check layout. Layout of statement and declaration constructs must follow the recommendations in the Ada Reference Manual, as indicated by the form of the syntax rules. For example an `else` keyword must be lined up with the corresponding `if` keyword.

  There are two respects in which the style rule enforced by this check option are more liberal than those in the Ada Reference Manual. First in the case of record declarations, it is permissible to put the `record` keyword on the same line as the `type` keyword, and then the `end` in `end record` must line up under `type`. This is also permitted when the type declaration is split on two lines. For example, any of the following three layouts is acceptable:

                type q is record
                   a : integer;
                   b : integer;
                end record;

                type q is
                   record
                      a : integer;
                      b : integer;
                   end record;

                type q is
                   record
                      a : integer;
                      b : integer;
                end record;

  Second, in the case of a block statement, a permitted alternative is to put the block label on the same line as the `declare` or `begin` keyword, and then line the `end` keyword up under the block label. For example both the following are permitted:

                Block : declare
                   A : Integer := 3;
                begin
                   Proc (A, A);
                end Block;

                Block :
                   declare
                      A : Integer := 3;
                   begin
                      Proc (A, A);
                   end Block;

  The same alternative format is allowed for loops. For example, both of the following are permitted:

                Clear : while J < 10 loop
                   A (J) := 0;
                end loop Clear;

                Clear :
                   while J < 10 loop
                      A (J) := 0;
                   end loop Clear;

`Lnnn`
  Set maximum nesting level. The maximum level of nesting of constructs (including subprograms, loops, blocks, packages, and conditionals) may not exceed the given value `nnn`. A value of zero disconnects this style check.
`m`
  Check maximum line length. The length of source lines must not exceed 79 characters, including any trailing blanks. The value of 79 allows convenient display on an 80 character wide device or window, allowing for possible special treatment of 80 character lines. Note that this count is of characters in the source text. This means that a tab character counts as one character in this count and a wide character sequence counts as a single character (however many bytes are needed in the encoding).
`Mnnn`
  Set maximum line length. The length of lines must not exceed the given value `nnn`. The maximum value that can be specified is 32767. If neither style option for setting the line length is used, then the default is 255. This also controls the maximum length of lexical elements, where the only restriction is that they must fit on a single line.
`n`
  Check casing of entities in Standard. Any identifier from Standard must be cased to match the presentation in the Ada Reference Manual (for example, `Integer` and `ASCII.NUL`).
`N`
  Turn off all style checks. All style check options are turned off.
`o`
  Check order of subprogram bodies. All subprogram bodies in a given scope (e.g. a package body) must be in alphabetical order. The ordering rule uses normal Ada rules for comparing strings, ignoring casing of letters, except that if there is a trailing numeric suffix, then the value of this suffix is used in the ordering (e.g. Junk2 comes before Junk10).
`O`
  Check that overriding subprograms are explicitly marked as such. The declaration of a primitive operation of a type extension that overrides an inherited operation must carry an overriding indicator.
`p`
  Check pragma casing. Pragma names must be written in mixed case, that is, the initial letter and any letter following an underscore must be uppercase. All other letters must be lowercase.
`r`
  Check references. All identifier references must be cased in the same way as the corresponding declaration. No specific casing style is imposed on identifiers. The only requirement is for consistency of references with declarations.
`s`
  Check separate specs. Separate declarations (“specs”) are required for subprograms (a body is not allowed to serve as its own declaration). The only exception is that parameterless library level procedures are not required to have a separate declaration. This exception covers the most frequent form of main program procedures.
`S`
  Check no statements after `then`/`else`. No statements are allowed on the same line as a `then` or `else` keyword following the keyword in an `if` statement. `or else` and `and then` are not affected, and a special exception allows a pragma to appear after `else`.
`t`
  Check token spacing. The following token spacing rules are enforced:
  - The keywords `abs` and `not` must be followed by a space.
  - The token `=>` must be surrounded by spaces.
  - The token `<>` must be preceded by a space or a left parenthesis.
  - Binary operators other than `**` must be surrounded by spaces. There is no restriction on the layout of the `**` binary operator.
  - Colon must be surrounded by spaces.
  - Colon-equal (assignment, initialization) must be surrounded by spaces.
  - Comma must be the first non-blank character on the line, or be immediately preceded by a non-blank character, and must be followed by a space.
  - If the token preceding a left parenthesis ends with a letter or digit, then a space must separate the two tokens.
  - if the token following a right parenthesis starts with a letter or digit, then a space must separate the two tokens.
  - A right parenthesis must either be the first non-blank character on a line, or it must be preceded by a non-blank character.
  - A semicolon must not be preceded by a space, and must not be followed by a non-blank character.
  - A unary plus or minus may not be followed by a space.
  - A vertical bar must be surrounded by spaces.
``
  Exactly one blank (and no other white space) must appear between a `not` token and a following `in` token.
`u`
  Check unnecessary blank lines. Unnecessary blank lines are not allowed. A blank line is considered unnecessary if it appears at the end of the file, or if more than one blank line occurs in sequence.
`x`
  Check extra parentheses. Unnecessary extra level of parentheses (C-style) are not allowed around conditions in `if` statements, `while` statements and `exit` statements.
`y`
  Set all standard style check options This is equivalent to `gnaty3aAbcefhiklmnprst`, that is all checking options enabled with the exception of `-gnatyB`, `-gnatyd`, `-gnatyI`, `-gnatyLnnn`, `-gnatyo`, `-gnatyO`, `-gnatyS`, `-gnatyu`, and `-gnatyx`.
`-`
  Remove style check options This causes any subsequent options in the string to act as canceling the corresponding style check option. To cancel maximum nesting level control, use `L` parameter witout any integer value after that, because any digit following `-` in the parameter string of the `-gnaty` option will be threated as canceling indentation check. The same is true for `M` parameter. `y` and `N` parameters are not allowed after `-`.
`+`
  This causes any subsequent options in the string to enable the corresponding style check option. That is, it cancels the effect of a previous -, if any.

In the above rules, appearing in column one is always permitted, that is, counts as meeting either a requirement for a required preceding space, or as meeting a requirement for no preceding space.

Appearing at the end of a line is also always permitted, that is, counts as meeting either a requirement for a following space, or as meeting a requirement for no following space.

If any of these style rules is violated, a message is generated giving details on the violation. The initial characters of such messages are always “`(style)`”. Note that these messages are treated as warning messages, so they normally do not prevent the generation of an object file. The `-gnatwe` switch can be used to treat warning messages, including style messages, as fatal errors.

The switch `-gnaty` on its own (that is not followed by any letters or digits) is equivalent to the use of `-gnatyy` as described above, that is all built-in standard style check options are enabled.

The switch `-gnatyN` clears any previously set style checks.

Next: Using gcc for Syntax Checking, Previous: Style Checking, Up: Switches for gcc

#### 3.2.6 Run-Time Checks

By default, the following checks are suppressed: integer overflow checks, stack overflow checks, and checks for access before elaboration on subprogram calls. All other checks, including range checks and array bounds checks, are turned on by default. The following `gcc` switches refine this default behavior.

`-gnatp`
  This switch causes the unit to be compiled as though `pragma Suppress (All_checks)` had been present in the source. Validity checks are also eliminated (in other words `-gnatp` also implies `-gnatVn`. Use this switch to improve the performance of the code at the expense of safety in the presence of invalid data or program bugs.

  Note that when checks are suppressed, the compiler is allowed, but not required, to omit the checking code. If the run-time cost of the checking code is zero or near-zero, the compiler will generate it even if checks are suppressed. In particular, if the compiler can prove that a certain check will necessarily fail, it will generate code to do an unconditional “raise”, even if checks are suppressed. The compiler warns in this case. Another case in which checks may not be eliminated is when they are embedded in certain run time routines such as math library routines.

  Of course, run-time checks are omitted whenever the compiler can prove that they will not fail, whether or not checks are suppressed.

  Note that if you suppress a check that would have failed, program execution is erroneous, which means the behavior is totally unpredictable. The program might crash, or print wrong answers, or do anything else. It might even do exactly what you wanted it to do (and then it might start failing mysteriously next week or next year). The compiler will generate code based on the assumption that the condition being checked is true, which can result in disaster if that assumption is wrong.

  The `-gnatp` switch has no effect if a subsequent `-gnat-p` switch appears.

`-gnat-p`
  This switch cancels the effect of a previous `gnatp` switch.
`-gnato??`
  This switch controls the mode used for computing intermediate arithmetic integer operations, and also enables overflow checking. For a full description of overflow mode and checking control, see the “Overflow Check Handling in GNAT” appendix in this User's Guide.

  Overflow checks are always enabled by this switch. The argument controls the mode, using the codes

  - 1 = STRICT In STRICT mode, intermediate operations are always done using the base type, and overflow checking ensures that the result is within the base type range.
  - 2 = MINIMIZED In MINIMIZED mode, overflows in intermediate operations are avoided where possible by using a larger integer type for the computation (typically `Long_Long_Integer`). Overflow checking ensures that the result fits in this larger integer type.
  - 3 = ELIMINATED In ELIMINATED mode, overflows in intermediate operations are avoided by using multi-precision arithmetic. In this case, overflow checking has no effect on intermediate operations (since overflow is impossible).

  If two digits are present after `-gnato` then the first digit sets the mode for expressions outside assertions, and the second digit sets the mode for expressions within assertions. Here assertions is used in the technical sense (which includes for example precondition and postcondition expressions).

  If one digit is present, the corresponding mode is applicable to both expressions within and outside assertion expressions.

  If no digits are present, the default is to enable overflow checks and set STRICT mode for both kinds of expressions. This is compatible with the use of `-gnato` in previous versions of GNAT.

  Note that the `-gnato??` switch does not affect the code generated for any floating-point operations; it applies only to integer semantics. For floating-point, GNAT has the `Machine_Overflows` attribute set to `False` and the normal mode of operation is to generate IEEE NaN and infinite values on overflow or invalid operations (such as dividing 0.0 by 0.0).

  The reason that we distinguish overflow checking from other kinds of range constraint checking is that a failure of an overflow check, unlike for example the failure of a range check, can result in an incorrect value, but cannot cause random memory destruction (like an out of range subscript), or a wild jump (from an out of range case value). Overflow checking is also quite expensive in time and space, since in general it requires the use of double length arithmetic.

  Note again that the default is `-gnato00`, so overflow checking is not performed in default mode. This means that out of the box, with the default settings, GNAT does not do all the checks expected from the language description in the Ada Reference Manual. If you want all constraint checks to be performed, as described in this Manual, then you must explicitly use the `-gnato??` switch either on the `gnatmake` or `gcc` command.

`-gnatE`
  Enables dynamic checks for access-before-elaboration on subprogram calls and generic instantiations. Note that `-gnatE` is not necessary for safety, because in the default mode, GNAT ensures statically that the checks would not fail. For full details of the effect and use of this switch, See Compiling Using gcc.
`-fstack-check`
  Activates stack overflow checking. For full details of the effect and use of this switch see Stack Overflow Checking.

The setting of these switches only controls the default setting of the checks. You may modify them using either `Suppress` (to remove checks) or `Unsuppress` (to add back suppressed checks) pragmas in the program source.

Next: Using gcc for Semantic Checking, Previous: Run-Time Checks, Up: Switches for gcc

#### 3.2.7 Using `gcc` for Syntax Checking

`-gnats`
  The `s` stands for “syntax”.

  Run GNAT in syntax checking only mode. For example, the command

                $ gcc -c -gnats x.adb

  compiles file `x.adb` in syntax-check-only mode. You can check a series of files in a single command , and can use wild cards to specify such a group of files. Note that you must specify the `-c` (compile only) flag in addition to the `-gnats` flag. . You may use other switches in conjunction with `-gnats`. In particular, `-gnatl` and `-gnatv` are useful to control the format of any generated error messages.

  When the source file is empty or contains only empty lines and/or comments, the output is a warning:

                $ gcc -c -gnats -x ada toto.txt
                toto.txt:1:01: warning: empty file, contains no compilation units
                $

  Otherwise, the output is simply the error messages, if any. No object file or ALI file is generated by a syntax-only compilation. Also, no units other than the one specified are accessed. For example, if a unit `X` `with`'s a unit `Y`, compiling unit `X` in syntax check only mode does not access the source file containing unit `Y`.

  Normally, GNAT allows only a single unit in a source file. However, this restriction does not apply in syntax-check-only mode, and it is possible to check a file containing multiple compilation units concatenated together. This is primarily used by the `gnatchop` utility (see Renaming Files Using gnatchop).

Next: Compiling Different Versions of Ada, Previous: Using gcc for Syntax Checking, Up: Switches for gcc

#### 3.2.8 Using `gcc` for Semantic Checking

`-gnatc`
  The `c` stands for “check”. Causes the compiler to operate in semantic check mode, with full checking for all illegalities specified in the Ada Reference Manual, but without generation of any object code (no object file is generated).

  Because dependent files must be accessed, you must follow the GNAT semantic restrictions on file structuring to operate in this mode:

  - The needed source files must be accessible (see Search Paths and the Run-Time Library (RTL)).
  - Each file must contain only one compilation unit.
  - The file name and unit name must match (see File Naming Rules).

  The output consists of error messages as appropriate. No object file is generated. An `ALI` file is generated for use in the context of cross-reference tools, but this file is marked as not being suitable for binding (since no object file is generated). The checking corresponds exactly to the notion of legality in the Ada Reference Manual.

  Any unit can be compiled in semantics-checking-only mode, including units that would not normally be compiled (subunits, and specifications where a separate body is present).

Next: Character Set Control, Previous: Using gcc for Semantic Checking, Up: Switches for gcc

#### 3.2.9 Compiling Different Versions of Ada

The switches described in this section allow you to explicitly specify the version of the Ada language that your programs are written in. By default GNAT assumes Ada 2005, but you can also specify Ada 95 or indicate Ada 83 compatibility mode.

`-gnat83 (Ada 83 Compatibility Mode)`
  Although GNAT is primarily an Ada 95 / Ada 2005 compiler, this switch specifies that the program is to be compiled in Ada 83 mode. With `-gnat83`, GNAT rejects most post-Ada 83 extensions and applies Ada 83 semantics where this can be done easily. It is not possible to guarantee this switch does a perfect job; some subtle tests, such as are found in earlier ACVC tests (and that have been removed from the ACATS suite for Ada 95), might not compile correctly. Nevertheless, this switch may be useful in some circumstances, for example where, due to contractual reasons, existing code needs to be maintained using only Ada 83 features.

  With few exceptions (most notably the need to use `<>` on unconstrained generic formal parameters, the use of the new Ada 95 / Ada 2005 reserved words, and the use of packages with optional bodies), it is not necessary to specify the `-gnat83` switch when compiling Ada 83 programs, because, with rare exceptions, Ada 95 and Ada 2005 are upwardly compatible with Ada 83. Thus a correct Ada 83 program is usually also a correct program in these later versions of the language standard. For further information, please refer to Compatibility and Porting Guide.

`-gnat95 (Ada 95 mode)`
  This switch directs the compiler to implement the Ada 95 version of the language. Since Ada 95 is almost completely upwards compatible with Ada 83, Ada 83 programs may generally be compiled using this switch (see the description of the `-gnat83` switch for further information about Ada 83 mode). If an Ada 2005 program is compiled in Ada 95 mode, uses of the new Ada 2005 features will cause error messages or warnings.

  This switch also can be used to cancel the effect of a previous `-gnat83`, `-gnat05/2005`, or `-gnat12/2012` switch earlier in the command line.

`-gnat05 or -gnat2005 (Ada 2005 mode)`
  This switch directs the compiler to implement the Ada 2005 version of the language, as documented in the official Ada standards document. Since Ada 2005 is almost completely upwards compatible with Ada 95 (and thus also with Ada 83), Ada 83 and Ada 95 programs may generally be compiled using this switch (see the description of the `-gnat83` and `-gnat95` switches for further information).
`-gnat12 or -gnat2012 (Ada 2012 mode)`
  This switch directs the compiler to implement the Ada 2012 version of the language. Since Ada 2012 is almost completely upwards compatible with Ada 2005 (and thus also with Ada 83, and Ada 95), Ada 83 and Ada 95 programs may generally be compiled using this switch (see the description of the `-gnat83`, `-gnat95`, and `-gnat05/2005` switches for further information).

  For information about the approved “Ada Issues” that have been incorporated into Ada 2012, see http://www.ada-auth.org/ais.html. Included with GNAT releases is a file `features-ada12` that describes the set of implemented Ada 2012 features.

`-gnatX (Enable GNAT Extensions)`
  This switch directs the compiler to implement the latest version of the language (currently Ada 2012) and also to enable certain GNAT implementation extensions that are not part of any Ada standard. For a full list of these extensions, see the GNAT reference manual.

Next: File Naming Control, Previous: Compiling Different Versions of Ada, Up: Switches for gcc

#### 3.2.10 Character Set Control

`-gnatic`
  Normally GNAT recognizes the Latin-1 character set in source program identifiers, as described in the Ada Reference Manual. This switch causes GNAT to recognize alternate character sets in identifiers. c is a single character indicating the character set, as follows:
  `1`
    ISO 8859-1 (Latin-1) identifiers
  `2`
    ISO 8859-2 (Latin-2) letters allowed in identifiers
  `3`
    ISO 8859-3 (Latin-3) letters allowed in identifiers
  `4`
    ISO 8859-4 (Latin-4) letters allowed in identifiers
  `5`
    ISO 8859-5 (Cyrillic) letters allowed in identifiers
  `9`
    ISO 8859-15 (Latin-9) letters allowed in identifiers
  `p`
    IBM PC letters (code page 437) allowed in identifiers
  `8`
    IBM PC letters (code page 850) allowed in identifiers
  `f`
    Full upper-half codes allowed in identifiers
  `n`
    No upper-half codes allowed in identifiers
  `w`
    Wide-character codes (that is, codes greater than 255) allowed in identifiers

  See Foreign Language Representation, for full details on the implementation of these character sets.

`-gnatWe`
  Specify the method of encoding for wide characters. e is one of the following:
  `h`
    Hex encoding (brackets coding also recognized)
  `u`
    Upper half encoding (brackets encoding also recognized)
  `s`
    Shift/JIS encoding (brackets encoding also recognized)
  `e`
    EUC encoding (brackets encoding also recognized)
  `8`
    UTF-8 encoding (brackets encoding also recognized)
  `b`
    Brackets encoding only (default value)
  For full details on these encoding methods see Wide Character Encodings. Note that brackets coding is always accepted, even if one of the other options is specified, so for example `-gnatW8` specifies that both brackets and UTF-8 encodings will be recognized. The units that are with'ed directly or indirectly will be scanned using the specified representation scheme, and so if one of the non-brackets scheme is used, it must be used consistently throughout the program. However, since brackets encoding is always recognized, it may be conveniently used in standard libraries, allowing these libraries to be used with any of the available coding schemes.

  Note that brackets encoding only applies to program text. Within comments, brackets are considered to be normal graphic characters, and bracket sequences are never recognized as wide characters.

  If no `-gnatW?` parameter is present, then the default representation is normally Brackets encoding only. However, if the first three characters of the file are 16#EF# 16#BB# 16#BF# (the standard byte order mark or BOM for UTF-8), then these three characters are skipped and the default representation for the file is set to UTF-8.

  Note that the wide character representation that is specified (explicitly or by default) for the main program also acts as the default encoding used for Wide_Text_IO files if not specifically overridden by a WCEM form parameter.

When no `-gnatW?` is specified, then characters (other than wide characters represented using brackets notation) are treated as 8-bit Latin-1 codes. The codes recognized are the Latin-1 graphic characters, and ASCII format effectors (CR, LF, HT, VT). Other lower half control characters in the range 16#00#..16#1F# are not accepted in program text or in comments. Upper half control characters (16#80#..16#9F#) are rejected in program text, but allowed and ignored in comments. Note in particular that the Next Line (NEL) character whose encoding is 16#85# is not recognized as an end of line in this default mode. If your source program contains instances of the NEL character used as a line terminator, you must use UTF-8 encoding for the whole source program. In default mode, all lines must be ended by a standard end of line sequence (CR, CR/LF, or LF).

Note that the convention of simply accepting all upper half characters in comments means that programs that use standard ASCII for program text, but UTF-8 encoding for comments are accepted in default mode, providing that the comments are ended by an appropriate (CR, or CR/LF, or LF) line terminator. This is a common mode for many programs with foreign language comments.

Next: Subprogram Inlining Control, Previous: Character Set Control, Up: Switches for gcc

#### 3.2.11 File Naming Control

`-gnatkn`
  Activates file name “krunching”. n, a decimal integer in the range 1-999, indicates the maximum allowable length of a file name (not including the `.ads` or `.adb` extension). The default is not to enable file name krunching.

  For the source file naming rules, See File Naming Rules.

Next: Auxiliary Output Control, Previous: File Naming Control, Up: Switches for gcc

#### 3.2.12 Subprogram Inlining Control

`-gnatn[12]`
  The `n` here is intended to suggest the first syllable of the word “inline”. GNAT recognizes and processes `Inline` pragmas. However, for the inlining to actually occur, optimization must be enabled and, in order to enable inlining of subprograms specified by pragma `Inline`, you must also specify this switch. In the absence of this switch, GNAT does not attempt inlining and does not need to access the bodies of subprograms for which `pragma Inline` is specified if they are not in the current unit.

  You can optionally specify the inlining level: 1 for moderate inlining across modules, which is a good compromise between compilation times and performances at run time, or 2 for full inlining across modules, which may bring about longer compilation times. If no inlining level is specified, the compiler will pick it based on the optimization level: 1 for `-O1`, `-O2` or `-Os` and 2 for `-O3`.

  If you specify this switch the compiler will access these bodies, creating an extra source dependency for the resulting object file, and where possible, the call will be inlined. For further details on when inlining is possible see Inlining of Subprograms.

`-gnatN`
  This switch activates front-end inlining which also generates additional dependencies.

  When using a gcc-based back end (in practice this means using any version of GNAT other than the JGNAT, .NET or GNAAMP versions), then the use of `-gnatN` is deprecated, and the use of `-gnatn` is preferred. Historically front end inlining was more extensive than the gcc back end inlining, but that is no longer the case.

Next: Debugging Control, Previous: Subprogram Inlining Control, Up: Switches for gcc

#### 3.2.13 Auxiliary Output Control

`-gnatt`
  Causes GNAT to write the internal tree for a unit to a file (with the extension `.adt`. This not normally required, but is used by separate analysis tools. Typically these tools do the necessary compilations automatically, so you should not have to specify this switch in normal operation. Note that the combination of switches `-gnatct` generates a tree in the form required by ASIS applications.
`-gnatu`
  Print a list of units required by this compilation on `stdout`. The listing includes all units on which the unit being compiled depends either directly or indirectly.
`-pass-exit-codes`
  If this switch is not used, the exit code returned by `gcc` when compiling multiple files indicates whether all source files have been successfully used to generate object files or not.

  When `-pass-exit-codes` is used, `gcc` exits with an extended exit status and allows an integrated development environment to better react to a compilation failure. Those exit status are:

  5
    There was an error in at least one source file.
  3
    At least one source file did not generate an object file.
  2
    The compiler died unexpectedly (internal error for example).
  0
    An object file has been generated for every source file.

Next: Exception Handling Control, Previous: Auxiliary Output Control, Up: Switches for gcc

#### 3.2.14 Debugging Control

`-gnatdx`
  Activate internal debugging switches. x is a letter or digit, or string of letters or digits, which specifies the type of debugging outputs desired. Normally these are used only for internal development or system debugging purposes. You can find full documentation for these switches in the body of the `Debug` unit in the compiler source file `debug.adb`.
`-gnatG[=nn]`
  This switch causes the compiler to generate auxiliary output containing a pseudo-source listing of the generated expanded code. Like most Ada compilers, GNAT works by first transforming the high level Ada code into lower level constructs. For example, tasking operations are transformed into calls to the tasking run-time routines. A unique capability of GNAT is to list this expanded code in a form very close to normal Ada source. This is very useful in understanding the implications of various Ada usage on the efficiency of the generated code. There are many cases in Ada (e.g. the use of controlled types), where simple Ada statements can generate a lot of run-time code. By using `-gnatG` you can identify these cases, and consider whether it may be desirable to modify the coding approach to improve efficiency.

  The optional parameter `nn` if present after -gnatG specifies an alternative maximum line length that overrides the normal default of 72. This value is in the range 40-999999, values less than 40 being silently reset to 40. The equal sign is optional.

  The format of the output is very similar to standard Ada source, and is easily understood by an Ada programmer. The following special syntactic additions correspond to low level features used in the generated code that do not have any exact analogies in pure Ada source form. The following is a partial list of these special constructions. See the spec of package `Sprint` in file `sprint.ads` for a full list.

  If the switch `-gnatL` is used in conjunction with `-gnatG`, then the original source lines are interspersed in the expanded source (as comment lines with the original line number).

  `new` xxx [`storage_pool =` yyy]
    Shows the storage pool being used for an allocator.
  `at end` procedure-name`;`
    Shows the finalization (cleanup) procedure for a scope.
  `(if` expr `then` expr `else` expr`)`
    Conditional expression equivalent to the `x?y:z` construction in C.
  target`^(`source`)`
    A conversion with floating-point truncation instead of rounding.
  target`?(`source`)`
    A conversion that bypasses normal Ada semantic checking. In particular enumeration types and fixed-point types are treated simply as integers.
  target`?^(`source`)`
    Combines the above two cases.
  x`#/` y
  x`#mod` y
  x`#*` y
  x`#rem` y
    A division or multiplication of fixed-point values which are treated as integers without any kind of scaling.
  `free` expr [`storage_pool =` xxx]
    Shows the storage pool associated with a `free` statement.
  `[subtype or type declaration]`
    Used to list an equivalent declaration for an internally generated type that is referenced elsewhere in the listing.
  `freeze` type-name [actions]
    Shows the point at which type-name is frozen, with possible associated actions to be performed at the freeze point.
  `reference` itype
    Reference (and hence definition) to internal type itype.
  function-name`! (`arg`,` arg`,` arg`)`
    Intrinsic function call.
  label-name`: label`
    Declaration of label labelname.
  `#$` subprogram-name
    An implicit call to a run-time support routine (to meet the requirement of H.3.1(9) in a convenient manner).
  expr`&&` expr`&&` expr`... &&` expr
    A multiple concatenation (same effect as expr & expr & expr, but handled more efficiently).
  `[constraint_error]`
    Raise the `Constraint_Error` exception.
  expression`'reference`
    A pointer to the result of evaluating expression.
  target-type`!(`source-expression`)`
    An unchecked conversion of source-expression to target-type.
  `[`numerator`/`denominator`]`
    Used to represent internal real literals (that) have no exact representation in base 2-16 (for example, the result of compile time evaluation of the expression 1.0/27.0).
`-gnatD[=nn]`
  When used in conjunction with `-gnatG`, this switch causes the expanded source, as described above for `-gnatG` to be written to files with names `xxx.dg`, where `xxx` is the normal file name, instead of to the standard output file. For example, if the source file name is `hello.adb`, then a file `hello.adb.dg` will be written. The debugging information generated by the `gcc` `-g` switch will refer to the generated `xxx.dg` file. This allows you to do source level debugging using the generated code which is sometimes useful for complex code, for example to find out exactly which part of a complex construction raised an exception. This switch also suppress generation of cross-reference information (see `-gnatx`) since otherwise the cross-reference information would refer to the `.dg` file, which would cause confusion since this is not the original source file.

  Note that `-gnatD` actually implies `-gnatG` automatically, so it is not necessary to give both options. In other words `-gnatD` is equivalent to `-gnatDG`).

  If the switch `-gnatL` is used in conjunction with `-gnatDG`, then the original source lines are interspersed in the expanded source (as comment lines with the original line number).

  The optional parameter `nn` if present after -gnatD specifies an alternative maximum line length that overrides the normal default of 72. This value is in the range 40-999999, values less than 40 being silently reset to 40. The equal sign is optional.

`-gnatr`
  This switch causes pragma Restrictions to be treated as Restriction_Warnings so that violation of restrictions causes warnings rather than illegalities. This is useful during the development process when new restrictions are added or investigated. The switch also causes pragma Profile to be treated as Profile_Warnings, and pragma Restricted_Run_Time and pragma Ravenscar set restriction warnings rather than restrictions.
`-gnatR[0|1|2|3[s]]`
  This switch controls output from the compiler of a listing showing representation information for declared types and objects. For `-gnatR0`, no information is output (equivalent to omitting the `-gnatR` switch). For `-gnatR1` (which is the default, so `-gnatR` with no parameter has the same effect), size and alignment information is listed for declared array and record types. For `-gnatR2`, size and alignment information is listed for all declared types and objects. Finally `-gnatR3` includes symbolic expressions for values that are computed at run time for variant records. These symbolic expressions have a mostly obvious format with #n being used to represent the value of the n'th discriminant. See source files `repinfo.ads/adb` in the `GNAT` sources for full details on the format of `-gnatR3` output. If the switch is followed by an s (e.g. `-gnatR2s`), then the output is to a file with the name `file.rep` where file is the name of the corresponding source file. Note that it is possible for record components to have zero size. In this case, the component clause uses an obvious extension of permitted Ada syntax, for example `at 0 range 0 .. -1`.

  Representation information requires that code be generated (since it is the code generator that lays out complex data structures). If an attempt is made to output representation information when no code is generated, for example when a subunit is compiled on its own, then no information can be generated and the compiler outputs a message to this effect.

`-gnatS`
  The use of the switch `-gnatS` for an Ada compilation will cause the compiler to output a representation of package Standard in a form very close to standard Ada. It is not quite possible to do this entirely in standard Ada (since new numeric base types cannot be created in standard Ada), but the output is easily readable to any Ada programmer, and is useful to determine the characteristics of target dependent types in package Standard.
`-gnatx`
  Normally the compiler generates full cross-referencing information in the `ALI` file. This information is used by a number of tools, including `gnatfind` and `gnatxref`. The `-gnatx` switch suppresses this information. This saves some space and may slightly speed up compilation, but means that these tools cannot be used.

Next: Units to Sources Mapping Files, Previous: Debugging Control, Up: Switches for gcc

#### 3.2.15 Exception Handling Control

GNAT uses two methods for handling exceptions at run-time. The `setjmp/longjmp` method saves the context when entering a frame with an exception handler. Then when an exception is raised, the context can be restored immediately, without the need for tracing stack frames. This method provides very fast exception propagation, but introduces significant overhead for the use of exception handlers, even if no exception is raised.

The other approach is called “zero cost” exception handling. With this method, the compiler builds static tables to describe the exception ranges. No dynamic code is required when entering a frame containing an exception handler. When an exception is raised, the tables are used to control a back trace of the subprogram invocation stack to locate the required exception handler. This method has considerably poorer performance for the propagation of exceptions, but there is no overhead for exception handlers if no exception is raised. Note that in this mode and in the context of mixed Ada and C/C++ programming, to propagate an exception through a C/C++ code, the C/C++ code must be compiled with the `-funwind-tables` GCC's option.

The following switches may be used to control which of the two exception handling methods is used.

`--RTS=sjlj`
  This switch causes the setjmp/longjmp run-time (when available) to be used for exception handling. If the default mechanism for the target is zero cost exceptions, then this switch can be used to modify this default, and must be used for all units in the partition. This option is rarely used. One case in which it may be advantageous is if you have an application where exception raising is common and the overall performance of the application is improved by favoring exception propagation.
`--RTS=zcx`
  This switch causes the zero cost approach to be used for exception handling. If this is the default mechanism for the target (see below), then this switch is unneeded. If the default mechanism for the target is setjmp/longjmp exceptions, then this switch can be used to modify this default, and must be used for all units in the partition. This option can only be used if the zero cost approach is available for the target in use, otherwise it will generate an error.

The same option `--RTS` must be used both for `gcc` and `gnatbind`. Passing this option to `gnatmake` (see Switches for gnatmake) will ensure the required consistency through the compilation and binding steps.

Next: Integrated Preprocessing, Previous: Exception Handling Control, Up: Switches for gcc

#### 3.2.16 Units to Sources Mapping Files

`-gnatem=path`
  A mapping file is a way to communicate to the compiler two mappings: from unit names to file names (without any directory information) and from file names to path names (with full directory information). These mappings are used by the compiler to short-circuit the path search.

  The use of mapping files is not required for correct operation of the compiler, but mapping files can improve efficiency, particularly when sources are read over a slow network connection. In normal operation, you need not be concerned with the format or use of mapping files, and the `-gnatem` switch is not a switch that you would use explicitly. It is intended primarily for use by automatic tools such as `gnatmake` running under the project file facility. The description here of the format of mapping files is provided for completeness and for possible use by other tools.

  A mapping file is a sequence of sets of three lines. In each set, the first line is the unit name, in lower case, with `%s` appended for specs and `%b` appended for bodies; the second line is the file name; and the third line is the path name.

  Example:

                   main%b
                   main.2.ada
                   /gnat/project1/sources/main.2.ada

  When the switch `-gnatem` is specified, the compiler will create in memory the two mappings from the specified file. If there is any problem (nonexistent file, truncated file or duplicate entries), no mapping will be created.

  Several `-gnatem` switches may be specified; however, only the last one on the command line will be taken into account.

  When using a project file, `gnatmake` creates a temporary mapping file and communicates it to the compiler using this switch.

Next: Code Generation Control, Previous: Units to Sources Mapping Files, Up: Switches for gcc

#### 3.2.17 Integrated Preprocessing

GNAT sources may be preprocessed immediately before compilation. In this case, the actual text of the source is not the text of the source file, but is derived from it through a process called preprocessing. Integrated preprocessing is specified through switches `-gnatep` and/or `-gnateD`. `-gnatep` indicates, through a text file, the preprocessing data to be used. `-gnateD` specifies or modifies the values of preprocessing symbol.

Note that when integrated preprocessing is used, the output from the preprocessor is not written to any external file. Instead it is passed internally to the compiler. If you need to preserve the result of preprocessing in a file, then you should use `gnatprep` to perform the desired preprocessing in stand-alone mode.

It is recommended that `gnatmake` switch -s should be used when Integrated Preprocessing is used. The reason is that preprocessing with another Preprocessing Data file without changing the sources will not trigger recompilation without this switch.

Note that `gnatmake` switch -m will almost always trigger recompilation for sources that are preprocessed, because `gnatmake` cannot compute the checksum of the source after preprocessing.

The actual preprocessing function is described in details in section Preprocessing Using gnatprep. This section only describes how integrated preprocessing is triggered and parameterized.

`-gnatep=`file
  This switch indicates to the compiler the file name (without directory information) of the preprocessor data file to use. The preprocessor data file should be found in the source directories. Note that when the compiler is called by a builder (`gnatmake` or `gprbuild`) with a project file, if the object directory is not also a source directory, the builder needs to be called with `-x`.

  A preprocessing data file is a text file with significant lines indicating how should be preprocessed either a specific source or all sources not mentioned in other lines. A significant line is a nonempty, non-comment line. Comments are similar to Ada comments.

  Each significant line starts with either a literal string or the character '*'. A literal string is the file name (without directory information) of the source to preprocess. A character '*' indicates the preprocessing for all the sources that are not specified explicitly on other lines (order of the lines is not significant). It is an error to have two lines with the same file name or two lines starting with the character '*'.

  After the file name or the character '*', another optional literal string indicating the file name of the definition file to be used for preprocessing (see Form of Definitions File). The definition files are found by the compiler in one of the source directories. In some cases, when compiling a source in a directory other than the current directory, if the definition file is in the current directory, it may be necessary to add the current directory as a source directory through switch -I., otherwise the compiler would not find the definition file.

  Then, optionally, switches similar to those of `gnatprep` may be found. Those switches are:

  `-b`
    Causes both preprocessor lines and the lines deleted by preprocessing to be replaced by blank lines, preserving the line number. This switch is always implied; however, if specified after `-c` it cancels the effect of `-c`.
  `-c`
    Causes both preprocessor lines and the lines deleted by preprocessing to be retained as comments marked with the special string “`--!` ”.
  `-Dsymbol=value`
    Define or redefine a symbol, associated with value. A symbol is an Ada identifier, or an Ada reserved word, with the exception of `if`, `else`, `elsif`, `end`, `and`, `or` and `then`. `value` is either a literal string, an Ada identifier or any Ada reserved word. A symbol declared with this switch replaces a symbol with the same name defined in a definition file.
  `-s`
    Causes a sorted list of symbol names and values to be listed on the standard output file.
  `-u`
    Causes undefined symbols to be treated as having the value `FALSE` in the context of a preprocessor test. In the absence of this option, an undefined symbol in a `#if` or `#elsif` test will be treated as an error.

  Examples of valid lines in a preprocessor data file:

                  "toto.adb"  "prep.def" -u
                  --  preprocess "toto.adb", using definition file "prep.def",
                  --  undefined symbol are False.

                  * -c -DVERSION=V101
                  --  preprocess all other sources without a definition file;
                  --  suppressed lined are commented; symbol VERSION has the value V101.

                  "titi.adb" "prep2.def" -s
                  --  preprocess "titi.adb", using definition file "prep2.def";
                  --  list all symbols with their values.

`-gnateDsymbol`[`=value`]
  Define or redefine a preprocessing symbol, associated with value. If no value is given on the command line, then the value of the symbol is `True`. A symbol is an identifier, following normal Ada (case-insensitive) rules for its syntax, and value is any sequence (including an empty sequence) of characters from the set (letters, digits, period, underline). Ada reserved words may be used as symbols, with the exceptions of `if`, `else`, `elsif`, `end`, `and`, `or` and `then`.

  A symbol declared with this switch on the command line replaces a symbol with the same name either in a definition file or specified with a switch -D in the preprocessor data file.

  This switch is similar to switch `-D` of `gnatprep`.

`-gnateG`
  When integrated preprocessing is performed and the preprocessor modifies the source text, write the result of this preprocessing into a file <source>.prep.

Previous: Integrated Preprocessing, Up: Switches for gcc

#### 3.2.18 Code Generation Control

The GCC technology provides a wide range of target dependent `-m` switches for controlling details of code generation with respect to different versions of architectures. This includes variations in instruction sets (e.g. different members of the power pc family), and different requirements for optimal arrangement of instructions (e.g. different members of the x86 family). The list of available `-m` switches may be found in the GCC documentation.

Use of these `-m` switches may in some cases result in improved code performance.

The GNAT technology is tested and qualified without any `-m` switches, so generally the most reliable approach is to avoid the use of these switches. However, we generally expect most of these switches to work successfully with GNAT, and many customers have reported successful use of these options.

Our general advice is to avoid the use of `-m` switches unless special needs lead to requirements in this area. In particular, there is no point in using `-m` switches to improve performance unless you actually see a performance improvement.

Next: Order of Compilation Issues, Previous: Switches for gcc, Up: Compiling Using gcc

### 3.3 Search Paths and the Run-Time Library (RTL)

With the GNAT source-based library system, the compiler must be able to find source files for units that are needed by the unit being compiled. Search paths are used to guide this process.

The compiler compiles one source file whose name must be given explicitly on the command line. In other words, no searching is done for this file. To find all other source files that are needed (the most common being the specs of units), the compiler examines the following directories, in the following order:

1. The directory containing the source file of the main unit being compiled (the file name on the command line).
2. Each directory named by an `-I` switch given on the `gcc` command line, in the order given.
3. Each of the directories listed in the text file whose name is given by the `ADA_PRJ_INCLUDE_FILE` environment variable.

   `ADA_PRJ_INCLUDE_FILE` is normally set by gnatmake or by the gnat driver when project files are used. It should not normally be set by other means.

4. Each of the directories listed in the value of the `ADA_INCLUDE_PATH` environment variable. Construct this value exactly as the `PATH` environment variable: a list of directory names separated by colons (semicolons when working with the NT version).
5. The content of the `ada_source_path` file which is part of the GNAT installation tree and is used to store standard libraries such as the GNAT Run Time Library (RTL) source files. Installing a library

Specifying the switch `-I-` inhibits the use of the directory containing the source file named in the command line. You can still have this directory on your search path, but in this case it must be explicitly requested with a `-I` switch.

Specifying the switch `-nostdinc` inhibits the search of the default location for the GNAT Run Time Library (RTL) source files.

The compiler outputs its object files and ALI files in the current working directory. Caution: The object file can be redirected with the `-o` switch; however, `gcc` and `gnat1` have not been coordinated on this so the `ALI` file will not go to the right place. Therefore, you should avoid using the `-o` switch.

The packages `Ada`, `System`, and `Interfaces` and their children make up the GNAT RTL, together with the simple `System.IO` package used in the `"Hello World"` example. The sources for these units are needed by the compiler and are kept together in one directory. Not all of the bodies are needed, but all of the sources are kept together anyway. In a normal installation, you need not specify these directory names when compiling or binding. Either the environment variables or the built-in defaults cause these files to be found.

In addition to the language-defined hierarchies (`System`, `Ada` and `Interfaces`), the GNAT distribution provides a fourth hierarchy, consisting of child units of `GNAT`. This is a collection of generally useful types, subprograms, etc. See GNAT Reference Manual, for further details.

Besides simplifying access to the RTL, a major use of search paths is in compiling sources from multiple directories. This can make development environments much more flexible.

Next: Examples, Previous: Search Paths and the Run-Time Library (RTL), Up: Compiling Using gcc

### 3.4 Order of Compilation Issues

If, in our earlier example, there was a spec for the `hello` procedure, it would be contained in the file `hello.ads`; yet this file would not have to be explicitly compiled. This is the result of the model we chose to implement library management. Some of the consequences of this model are as follows:

- There is no point in compiling specs (except for package specs with no bodies) because these are compiled as needed by clients. If you attempt a useless compilation, you will receive an error message. It is also useless to compile subunits because they are compiled as needed by the parent.
- There are no order of compilation requirements: performing a compilation never obsoletes anything. The only way you can obsolete something and require recompilations is to modify one of the source files on which it depends.
- There is no library as such, apart from the ALI files (see The Ada Library Information Files, for information on the format of these files). For now we find it convenient to create separate ALI files, but eventually the information therein may be incorporated into the object file directly.
- When you compile a unit, the source files for the specs of all units that it `with`'s, all its subunits, and the bodies of any generics it instantiates must be available (reachable by the search-paths mechanism described above), or you will receive a fatal error message.

Previous: Order of Compilation Issues, Up: Compiling Using gcc

### 3.5 Examples

The following are some typical Ada compilation command line examples:

`$ gcc -c xyz.adb`
  Compile body in file `xyz.adb` with all default options.
`$ gcc -c -O2 -gnata xyz-def.adb`
  Compile the child unit package in file `xyz-def.adb` with extensive optimizations, and pragma `Assert`/`Debug` statements enabled.
`$ gcc -c -gnatc abc-def.adb`
  Compile the subunit in file `abc-def.adb` in semantic-checking-only mode.

Next: Linking Using gnatlink, Previous: Compiling Using gcc, Up: Top

## 4 Binding Using `gnatbind`

This chapter describes the GNAT binder, `gnatbind`, which is used to bind compiled GNAT objects.

Note: to invoke `gnatbind` with a project file, use the `gnat` driver (see The GNAT Driver and Project Files).

The `gnatbind` program performs four separate functions:

1. Checks that a program is consistent, in accordance with the rules in Chapter 10 of the Ada Reference Manual. In particular, error messages are generated if a program uses inconsistent versions of a given unit.
2. Checks that an acceptable order of elaboration exists for the program and issues an error message if it cannot find an order of elaboration that satisfies the rules in Chapter 10 of the Ada Language Manual.
3. Generates a main program incorporating the given elaboration order. This program is a small Ada package (body and spec) that must be subsequently compiled using the GNAT compiler. The necessary compilation step is usually performed automatically by `gnatlink`. The two most important functions of this program are to call the elaboration routines of units in an appropriate order and to call the main program.
4. Determines the set of object files required by the given main program. This information is output in the forms of comments in the generated program, to be read by the `gnatlink` utility used to link the Ada application.

Next: Switches for gnatbind, Up: Binding Using gnatbind

### 4.1 Running `gnatbind`

The form of the `gnatbind` command is

         $ gnatbind [switches] mainprog[.ali] [switches]

where `mainprog.adb` is the Ada file containing the main program unit body. `gnatbind` constructs an Ada package in two files whose names are `b~mainprog.ads`, and `b~mainprog.adb`. For example, if given the parameter `hello.ali`, for a main program contained in file `hello.adb`, the binder output files would be `b~hello.ads` and `b~hello.adb`.

When doing consistency checking, the binder takes into consideration any source files it can locate. For example, if the binder determines that the given main program requires the package `Pack`, whose `.ALI` file is `pack.ali` and whose corresponding source spec file is `pack.ads`, it attempts to locate the source file `pack.ads` (using the same search path conventions as previously described for the `gcc` command). If it can locate this source file, it checks that the time stamps or source checksums of the source and its references to in `ALI` files match. In other words, any `ALI` files that mentions this spec must have resulted from compiling this version of the source file (or in the case where the source checksums match, a version close enough that the difference does not matter).

The effect of this consistency checking, which includes source files, is that the binder ensures that the program is consistent with the latest version of the source files that can be located at bind time. Editing a source file without compiling files that depend on the source file cause error messages to be generated by the binder.

For example, suppose you have a main program `hello.adb` and a package `P`, from file `p.ads` and you perform the following steps:

1. Enter `gcc -c hello.adb` to compile the main program.
2. Enter `gcc -c p.ads` to compile package `P`.
3. Edit file `p.ads`.
4. Enter `gnatbind hello`.

At this point, the file `p.ali` contains an out-of-date time stamp because the file `p.ads` has been edited. The attempt at binding fails, and the binder generates the following error messages:

         error: "hello.adb" must be recompiled ("p.ads" has been modified)
         error: "p.ads" has been modified and must be recompiled

Now both files must be recompiled as indicated, and then the bind can succeed, generating a main program. You need not normally be concerned with the contents of this file, but for reference purposes a sample binder output file is given in Example of Binder Output File.

In most normal usage, the default mode of `gnatbind` which is to generate the main package in Ada, as described in the previous section. In particular, this means that any Ada programmer can read and understand the generated main program. It can also be debugged just like any other Ada code provided the `-g` switch is used for `gnatbind` and `gnatlink`.

Next: Command-Line Access, Previous: Running gnatbind, Up: Binding Using gnatbind

### 4.2 Switches for `gnatbind`

The following switches are available with `gnatbind`; details will be presented in subsequent sections.

`--version`
  Display Copyright and version, then exit disregarding all other options.
`--help`
  If `--version` was not used, display usage, then exit disregarding all other options.
`-a`
  Indicates that, if supported by the platform, the adainit procedure should be treated as an initialisation routine by the linker (a constructor). This is intended to be used by the Project Manager to automatically initialize shared Stand-Alone Libraries.
`-aO`
  Specify directory to be searched for ALI files.
`-aI`
  Specify directory to be searched for source file.
`-A[=filename]`
  Output ALI list (to standard output or to the named file).
`-b`
  Generate brief messages to `stderr` even if verbose mode set.
`-c`
  Check only, no generation of binder output file.
`-dnn[k|m]`
  This switch can be used to change the default task stack size value to a specified size nn, which is expressed in bytes by default, or in kilobytes when suffixed with k or in megabytes when suffixed with m. In the absence of a ‘`[k|m]`’ suffix, this switch is equivalent, in effect, to completing all task specs with

                   pragma Storage_Size (nn);

  When they do not already have such a pragma.

`-Dnn[k|m]`
  This switch can be used to change the default secondary stack size value to a specified size nn, which is expressed in bytes by default, or in kilobytes when suffixed with k or in megabytes when suffixed with m.

  The secondary stack is used to deal with functions that return a variable sized result, for example a function returning an unconstrained String. There are two ways in which this secondary stack is allocated.

  For most targets, the secondary stack is growing on demand and is allocated as a chain of blocks in the heap. The -D option is not very relevant. It only give some control over the size of the allocated blocks (whose size is the minimum of the default secondary stack size value, and the actual size needed for the current allocation request).

  For certain targets, notably VxWorks 653, the secondary stack is allocated by carving off a fixed ratio chunk of the primary task stack. The -D option is used to define the size of the environment task's secondary stack.

`-e`
  Output complete list of elaboration-order dependencies.
`-E`
  Store tracebacks in exception occurrences when the target supports it. See also the packages `GNAT.Traceback` and `GNAT.Traceback.Symbolic` for more information. Note that on x86 ports, you must not use `-fomit-frame-pointer` `gcc` option.
`-F`
  Force the checks of elaboration flags. `gnatbind` does not normally generate checks of elaboration flags for the main executable, except when a Stand-Alone Library is used. However, there are cases when this cannot be detected by gnatbind. An example is importing an interface of a Stand-Alone Library through a pragma Import and only specifying through a linker switch this Stand-Alone Library. This switch is used to guarantee that elaboration flag checks are generated.
`-h`
  Output usage (help) information
`-H32`
  Use 32-bit allocations for `__gnat_malloc` (and thus for access types). For further details see Dynamic Allocation Control.
`-H64`
  Use 64-bit allocations for `__gnat_malloc` (and thus for access types). For further details see Dynamic Allocation Control.
`-I`
  Specify directory to be searched for source and ALI files.
`-I-`
  Do not look for sources in the current directory where `gnatbind` was invoked, and do not look for ALI files in the directory containing the ALI file named in the `gnatbind` command line.
`-l`
  Output chosen elaboration order.
`-Lxxx`
  Bind the units for library building. In this case the adainit and adafinal procedures (see Binding with Non-Ada Main Programs) are renamed to xxxinit and xxxfinal. Implies -n. (See GNAT and Libraries, for more details.)
`-Mxyz`
  Rename generated main program from main to xyz. This option is supported on cross environments only.
`-mn`
  Limit number of detected errors or warnings to n, where n is in the range 1..999999. The default value if no switch is given is 9999. If the number of warnings reaches this limit, then a message is output and further warnings are suppressed, the bind continues in this case. If the number of errors reaches this limit, then a message is output and the bind is abandoned. A value of zero means that no limit is enforced. The equal sign is optional.

  Furthermore, under Windows, the sources pointed to by the libraries path set in the registry are not searched for.

`-n`
  No main program.
`-nostdinc`
  Do not look for sources in the system default directory.
`-nostdlib`
  Do not look for library files in the system default directory.
`--RTS=rts-path`
  Specifies the default location of the runtime library. Same meaning as the equivalent `gnatmake` flag (see Switches for gnatmake).
`-o file`
  Name the output file file (default is `b~xxx.adb`). Note that if this option is used, then linking must be done manually, gnatlink cannot be used.
`-O[=filename]`
  Output object list (to standard output or to the named file).
`-p`
  Pessimistic (worst-case) elaboration order
`-P`
  Generate binder file suitable for CodePeer.
`-R`
  Output closure source list.
`-s`
  Require all source files to be present.
`-Sxxx`
  Specifies the value to be used when detecting uninitialized scalar objects with pragma Initialize_Scalars. The xxx string specified with the switch may be either
  - “`in`” requesting an invalid value where possible
  - “`lo`” for the lowest possible value
  - “`hi`” for the highest possible value
  - “`xx`” for a value consisting of repeated bytes with the value `16#`xx`#` (i.e., xx is a string of two hexadecimal digits).

  In addition, you can specify `-Sev` to indicate that the value is to be set at run time. In this case, the program will look for an environment variable of the form `GNAT_INIT_SCALARS=xx`, where xx is one of `in/lo/hi/xx` with the same meanings as above. If no environment variable is found, or if it does not have a valid value, then the default is `in` (invalid values).

`-static`
  Link against a static GNAT run time.
`-shared`
  Link against a shared GNAT run time when available.
`-t`
  Tolerate time stamp and other consistency errors
`-Tn`
  Set the time slice value to n milliseconds. If the system supports the specification of a specific time slice value, then the indicated value is used. If the system does not support specific time slice values, but does support some general notion of round-robin scheduling, then any nonzero value will activate round-robin scheduling.

  A value of zero is treated specially. It turns off time slicing, and in addition, indicates to the tasking run time that the semantics should match as closely as possible the Annex D requirements of the Ada RM, and in particular sets the default scheduling policy to `FIFO_Within_Priorities`.

`-un`
  Enable dynamic stack usage, with n results stored and displayed at program termination. A result is generated when a task terminates. Results that can't be stored are displayed on the fly, at task termination. This option is currently not supported on Itanium platforms. (See Dynamic Stack Usage Analysis for details.)
`-v`
  Verbose mode. Write error messages, header, summary output to `stdout`.
`-wx`
  Warning mode (x=s/e for suppress/treat as error)
`-Wxe`
  Override default wide character encoding for standard Text_IO files.
`-x`
  Exclude source files (check object consistency only).
`-y`
  Enable leap seconds support in `Ada.Calendar` and its children.
`-z`
  No main subprogram.

You may obtain this listing of switches by running `gnatbind` with no arguments.

Next: Binder Error Message Control, Up: Switches for gnatbind

#### 4.2.1 Consistency-Checking Modes

As described earlier, by default `gnatbind` checks that object files are consistent with one another and are consistent with any source files it can locate. The following switches control binder access to sources.

`-s`
  Require source files to be present. In this mode, the binder must be able to locate all source files that are referenced, in order to check their consistency. In normal mode, if a source file cannot be located it is simply ignored. If you specify this switch, a missing source file is an error.
`-Wxe`
  Override default wide character encoding for standard Text_IO files. Normally the default wide character encoding method used for standard [Wide_[Wide_]]Text_IO files is taken from the encoding specified for the main source input (see description of switch `-gnatWx` for the compiler). The use of this switch for the binder (which has the same set of possible arguments) overrides this default as specified.
`-x`
  Exclude source files. In this mode, the binder only checks that ALI files are consistent with one another. Source files are not accessed. The binder runs faster in this mode, and there is still a guarantee that the resulting program is self-consistent. If a source file has been edited since it was last compiled, and you specify this switch, the binder will not detect that the object file is out of date with respect to the source file. Note that this is the mode that is automatically used by `gnatmake` because in this case the checking against sources has already been performed by `gnatmake` in the course of compilation (i.e. before binding).

Next: Elaboration Control, Previous: Consistency-Checking Modes, Up: Switches for gnatbind

#### 4.2.2 Binder Error Message Control

The following switches provide control over the generation of error messages from the binder:

`-v`
  Verbose mode. In the normal mode, brief error messages are generated to `stderr`. If this switch is present, a header is written to `stdout` and any error messages are directed to `stdout`. All that is written to `stderr` is a brief summary message.
`-b`
  Generate brief error messages to `stderr` even if verbose mode is specified. This is relevant only when used with the `-v` switch.
`-mn`
  Limits the number of error messages to n, a decimal integer in the range 1-999. The binder terminates immediately if this limit is reached.
`-Mxxx`
  Renames the generated main program from `main` to `xxx`. This is useful in the case of some cross-building environments, where the actual main program is separate from the one generated by `gnatbind`.
`-ws`
  Suppress all warning messages.
`-we`
  Treat any warning messages as fatal errors.
`-t`
  The binder performs a number of consistency checks including:
  - Check that time stamps of a given source unit are consistent
  - Check that checksums of a given source unit are consistent
  - Check that consistent versions of `GNAT` were used for compilation
  - Check consistency of configuration pragmas as required

  Normally failure of such checks, in accordance with the consistency requirements of the Ada Reference Manual, causes error messages to be generated which abort the binder and prevent the output of a binder file and subsequent link to obtain an executable.

  The `-t` switch converts these error messages into warnings, so that binding and linking can continue to completion even in the presence of such errors. The result may be a failed link (due to missing symbols), or a non-functional executable which has undefined semantics. This means that `-t` should be used only in unusual situations, with extreme care.

Next: Output Control, Previous: Binder Error Message Control, Up: Switches for gnatbind

#### 4.2.3 Elaboration Control

The following switches provide additional control over the elaboration order. For full details see Elaboration Order Handling in GNAT.

`-p`
  Normally the binder attempts to choose an elaboration order that is likely to minimize the likelihood of an elaboration order error resulting in raising a `Program_Error` exception. This switch reverses the action of the binder, and requests that it deliberately choose an order that is likely to maximize the likelihood of an elaboration error. This is useful in ensuring portability and avoiding dependence on accidental fortuitous elaboration ordering.

  Normally it only makes sense to use the `-p` switch if dynamic elaboration checking is used (`-gnatE` switch used for compilation). This is because in the default static elaboration mode, all necessary `Elaborate` and `Elaborate_All` pragmas are implicitly inserted. These implicit pragmas are still respected by the binder in `-p` mode, so a safe elaboration order is assured.

  Note that `-p` is not intended for production use; it is more for debugging/experimental use.

Next: Dynamic Allocation Control, Previous: Elaboration Control, Up: Switches for gnatbind

#### 4.2.4 Output Control

The following switches allow additional control over the output generated by the binder.

`-c`
  Check only. Do not generate the binder output file. In this mode the binder performs all error checks but does not generate an output file.
`-e`
  Output complete list of elaboration-order dependencies, showing the reason for each dependency. This output can be rather extensive but may be useful in diagnosing problems with elaboration order. The output is written to `stdout`.
`-h`
  Output usage information. The output is written to `stdout`.
`-K`
  Output linker options to `stdout`. Includes library search paths, contents of pragmas Ident and Linker_Options, and libraries added by `gnatbind`.
`-l`
  Output chosen elaboration order. The output is written to `stdout`.
`-O`
  Output full names of all the object files that must be linked to provide the Ada component of the program. The output is written to `stdout`. This list includes the files explicitly supplied and referenced by the user as well as implicitly referenced run-time unit files. The latter are omitted if the corresponding units reside in shared libraries. The directory names for the run-time units depend on the system configuration.
`-o file`
  Set name of output file to file instead of the normal `b~mainprog.adb` default. Note that file denote the Ada binder generated body filename. Note that if this option is used, then linking must be done manually. It is not possible to use gnatlink in this case, since it cannot locate the binder file.
`-r`
  Generate list of `pragma Restrictions` that could be applied to the current unit. This is useful for code audit purposes, and also may be used to improve code generation in some cases.

Next: Binding with Non-Ada Main Programs, Previous: Output Control, Up: Switches for gnatbind

#### 4.2.5 Dynamic Allocation Control

The heap control switches – `-H32` and `-H64` – determine whether dynamic allocation uses 32-bit or 64-bit memory. They only affect compiler-generated allocations via `__gnat_malloc`; explicit calls to `malloc` and related functions from the C run-time library are unaffected.

`-H32`
  Allocate memory on 32-bit heap
`-H64`
  Allocate memory on 64-bit heap. This is the default unless explicitly overridden by a `'Size` clause on the access type.

These switches are only effective on VMS platforms.

Next: Binding Programs with No Main Subprogram, Previous: Dynamic Allocation Control, Up: Switches for gnatbind

#### 4.2.6 Binding with Non-Ada Main Programs

In our description so far we have assumed that the main program is in Ada, and that the task of the binder is to generate a corresponding function `main` that invokes this Ada main program. GNAT also supports the building of executable programs where the main program is not in Ada, but some of the called routines are written in Ada and compiled using GNAT (see Mixed Language Programming). The following switch is used in this situation:

`-n`
  No main program. The main program is not in Ada.

In this case, most of the functions of the binder are still required, but instead of generating a main program, the binder generates a file containing the following callable routines:

`adainit`
  You must call this routine to initialize the Ada part of the program by calling the necessary elaboration routines. A call to `adainit` is required before the first call to an Ada subprogram.

  Note that it is assumed that the basic execution environment must be setup to be appropriate for Ada execution at the point where the first Ada subprogram is called. In particular, if the Ada code will do any floating-point operations, then the FPU must be setup in an appropriate manner. For the case of the x86, for example, full precision mode is required. The procedure GNAT.Float_Control.Reset may be used to ensure that the FPU is in the right state.

`adafinal`
  You must call this routine to perform any library-level finalization required by the Ada subprograms. A call to `adafinal` is required after the last call to an Ada subprogram, and before the program terminates.

If the `-n` switch is given, more than one ALI file may appear on the command line for `gnatbind`. The normal closure calculation is performed for each of the specified units. Calculating the closure means finding out the set of units involved by tracing `with` references. The reason it is necessary to be able to specify more than one ALI file is that a given program may invoke two or more quite separate groups of Ada units.

The binder takes the name of its output file from the last specified ALI file, unless overridden by the use of the `-o file`. The output is an Ada unit in source form that can be compiled with GNAT. This compilation occurs automatically as part of the `gnatlink` processing.

Currently the GNAT run time requires a FPU using 80 bits mode precision. Under targets where this is not the default it is required to call GNAT.Float_Control.Reset before using floating point numbers (this include float computation, float input and output) in the Ada code. A side effect is that this could be the wrong mode for the foreign code where floating point computation could be broken after this call.

Previous: Binding with Non-Ada Main Programs, Up: Switches for gnatbind

#### 4.2.7 Binding Programs with No Main Subprogram

It is possible to have an Ada program which does not have a main subprogram. This program will call the elaboration routines of all the packages, then the finalization routines.

The following switch is used to bind programs organized in this manner:

`-z`
  Normally the binder checks that the unit name given on the command line corresponds to a suitable main subprogram. When this switch is used, a list of ALI files can be given, and the execution of the program consists of elaboration of these units in an appropriate order. Note that the default wide character encoding method for standard Text_IO files is always set to Brackets if this switch is set (you can use the binder switch `-Wx` to override this default).

Next: Search Paths for gnatbind, Previous: Switches for gnatbind, Up: Binding Using gnatbind

### 4.3 Command-Line Access

The package `Ada.Command_Line` provides access to the command-line arguments and program name. In order for this interface to operate correctly, the two variables

         int gnat_argc;
         char **gnat_argv;

are declared in one of the GNAT library routines. These variables must be set from the actual `argc` and `argv` values passed to the main program. With no `n` present, `gnatbind` generates the C main program to automatically set these variables. If the `n` switch is used, there is no automatic way to set these variables. If they are not set, the procedures in `Ada.Command_Line` will not be available, and any attempt to use them will raise `Constraint_Error`. If command line access is required, your main program must set `gnat_argc` and `gnat_argv` from the `argc` and `argv` values passed to it.

Next: Examples of gnatbind Usage, Previous: Command-Line Access, Up: Binding Using gnatbind

### 4.4 Search Paths for `gnatbind`

The binder takes the name of an ALI file as its argument and needs to locate source files as well as other ALI files to verify object consistency.

For source files, it follows exactly the same search rules as `gcc` (see Search Paths and the Run-Time Library (RTL)). For ALI files the directories searched are:

1. The directory containing the ALI file named in the command line, unless the switch `-I-` is specified.
2. All directories specified by `-I` switches on the `gnatbind` command line, in the order given.
3. Each of the directories listed in the text file whose name is given by the `ADA_PRJ_OBJECTS_FILE` environment variable.

   `ADA_PRJ_OBJECTS_FILE` is normally set by gnatmake or by the gnat driver when project files are used. It should not normally be set by other means.

4. Each of the directories listed in the value of the `ADA_OBJECTS_PATH` environment variable. Construct this value exactly as the `PATH` environment variable: a list of directory names separated by colons (semicolons when working with the NT version of GNAT).
5. The content of the `ada_object_path` file which is part of the GNAT installation tree and is used to store standard libraries such as the GNAT Run Time Library (RTL) unless the switch `-nostdlib` is specified. Installing a library

In the binder the switch `-I` is used to specify both source and library file paths. Use `-aI` instead if you want to specify source paths only, and `-aO` if you want to specify library paths only. This means that for the binder `-I` dir is equivalent to `-aI` dir `-aO` dir. The binder generates the bind file (a C language source file) in the current working directory.

The packages `Ada`, `System`, and `Interfaces` and their children make up the GNAT Run-Time Library, together with the package GNAT and its children, which contain a set of useful additional library functions provided by GNAT. The sources for these units are needed by the compiler and are kept together in one directory. The ALI files and object files generated by compiling the RTL are needed by the binder and the linker and are kept together in one directory, typically different from the directory containing the sources. In a normal installation, you need not specify these directory names when compiling or binding. Either the environment variables or the built-in defaults cause these files to be found.

Besides simplifying access to the RTL, a major use of search paths is in compiling sources from multiple directories. This can make development environments much more flexible.

Previous: Search Paths for gnatbind, Up: Binding Using gnatbind

### 4.5 Examples of `gnatbind` Usage

This section contains a number of examples of using the GNAT binding utility `gnatbind`.

`gnatbind hello`
  The main program `Hello` (source program in `hello.adb`) is bound using the standard switch settings. The generated main program is `b~hello.adb`. This is the normal, default use of the binder.
`gnatbind hello -o mainprog.adb`
  The main program `Hello` (source program in `hello.adb`) is bound using the standard switch settings. The generated main program is `mainprog.adb` with the associated spec in `mainprog.ads`. Note that you must specify the body here not the spec. Note that if this option is used, then linking must be done manually, since gnatlink will not be able to find the generated file.

Next: The GNAT Make Program gnatmake, Previous: Binding Using gnatbind, Up: Top

## 5 Linking Using `gnatlink`

This chapter discusses `gnatlink`, a tool that links an Ada program and builds an executable file. This utility invokes the system linker (via the `gcc` command) with a correct list of object files and library references. `gnatlink` automatically determines the list of files and references for the Ada part of a program. It uses the binder file generated by the `gnatbind` to determine this list.

Note: to invoke `gnatlink` with a project file, use the `gnat` driver (see The GNAT Driver and Project Files).

Next: Switches for gnatlink, Up: Linking Using gnatlink

### 5.1 Running `gnatlink`

The form of the `gnatlink` command is

         $ gnatlink [switches] mainprog[.ali]
                    [non-Ada objects] [linker options]

The arguments of `gnatlink` (switches, main `ALI` file, non-Ada objects or linker options) may be in any order, provided that no non-Ada object may be mistaken for a main `ALI` file. Any file name `F` without the `.ali` extension will be taken as the main `ALI` file if a file exists whose name is the concatenation of `F` and `.ali`.

`mainprog.ali` references the ALI file of the main program. The `.ali` extension of this file can be omitted. From this reference, `gnatlink` locates the corresponding binder file `b~mainprog.adb` and, using the information in this file along with the list of non-Ada objects and linker options, constructs a linker command file to create the executable.

The arguments other than the `gnatlink` switches and the main `ALI` file are passed to the linker uninterpreted. They typically include the names of object files for units written in other languages than Ada and any library references required to resolve references in any of these foreign language units, or in `Import` pragmas in any Ada units.

linker options is an optional list of linker specific switches. The default linker called by gnatlink is `gcc` which in turn calls the appropriate system linker.

One useful option for the linker is `-s`: it reduces the size of the executable by removing all symbol table and relocation information from the executable.

Standard options for the linker such as `-lmy_lib` or `-Ldir` can be added as is. For options that are not recognized by `gcc` as linker options, use the `gcc` switches `-Xlinker` or `-Wl,`.

Refer to the GCC documentation for details.

Here is an example showing how to generate a linker map:

         $ gnatlink my_prog -Wl,-Map,MAPFILE

Using linker options it is possible to set the program stack and heap size. See Setting Stack Size from gnatlink and Setting Heap Size from gnatlink.

`gnatlink` determines the list of objects required by the Ada program and prepends them to the list of objects passed to the linker. `gnatlink` also gathers any arguments set by the use of `pragma Linker_Options` and adds them to the list of arguments presented to the linker.

Previous: Running gnatlink, Up: Linking Using gnatlink

### 5.2 Switches for `gnatlink`

The following switches are available with the `gnatlink` utility:

`--version`
  Display Copyright and version, then exit disregarding all other options.
`--help`
  If `--version` was not used, display usage, then exit disregarding all other options.
`-f`
  On some targets, the command line length is limited, and `gnatlink` will generate a separate file for the linker if the list of object files is too long. The `-f` switch forces this file to be generated even if the limit is not exceeded. This is useful in some cases to deal with special situations where the command line length is exceeded.
`-g`
  The option to include debugging information causes the Ada bind file (in other words, `b~mainprog.adb`) to be compiled with `-g`. In addition, the binder does not delete the `b~mainprog.adb`, `b~mainprog.o` and `b~mainprog.ali` files. Without `-g`, the binder removes these files by default. The same procedure apply if a C bind file was generated using `-C` `gnatbind` option, in this case the filenames are `b_mainprog.c` and `b_mainprog.o`.
`-n`
  Do not compile the file generated by the binder. This may be used when a link is rerun with different options, but there is no need to recompile the binder file.
`-v`
  Causes additional information to be output, including a full list of the included object files. This switch option is most useful when you want to see what set of object files are being used in the link step.
`-v -v`
  Very verbose mode. Requests that the compiler operate in verbose mode when it compiles the binder file, and that the system linker run in verbose mode.
`-o exec-name`
  exec-name specifies an alternate name for the generated executable program. If this switch is omitted, the executable has the same name as the main unit. For example, `gnatlink try.ali` creates an executable called `try`.
`-b target`
  Compile your program to run on target, which is the name of a system configuration. You must have a GNAT cross-compiler built if target is not the same as your host system.
`-Bdir`
  Load compiler executables (for example, `gnat1`, the Ada compiler) from dir instead of the default location. Only use this switch when multiple versions of the GNAT compiler are available. See Directory Options, for further details. You would normally use the `-b` or `-V` switch instead.
`-M`
  When linking an executable, create a map file. The name of the map file has the same name as the executable with extension ".map".
`-M=mapfile`
  When linking an executable, create a map file. The name of the map file is "mapfile".
`--GCC=compiler_name`
  Program used for compiling the binder file. The default is `gcc`. You need to use quotes around compiler_name if `compiler_name` contains spaces or other separator characters. As an example `--GCC="foo -x -y"` will instruct `gnatlink` to use `foo -x -y` as your compiler. Note that switch `-c` is always inserted after your command name. Thus in the above example the compiler command that will be used by `gnatlink` will be `foo -c -x -y`. A limitation of this syntax is that the name and path name of the executable itself must not include any embedded spaces. If the compiler executable is different from the default one (gcc or <prefix>-gcc), then the back-end switches in the ALI file are not used to compile the binder generated source. For example, this is the case with `--GCC="foo -x -y"`. But the back end switches will be used for `--GCC="gcc -gnatv"`. If several `--GCC=compiler_name` are used, only the last compiler_name is taken into account. However, all the additional switches are also taken into account. Thus, `--GCC="foo -x -y" --GCC="bar -z -t"` is equivalent to `--GCC="bar -x -y -z -t"`.
`--LINK=name`
  name is the name of the linker to be invoked. This is especially useful in mixed language programs since languages such as C++ require their own linker to be used. When this switch is omitted, the default name for the linker is `gcc`. When this switch is used, the specified linker is called instead of `gcc` with exactly the same parameters that would have been passed to `gcc` so if the desired linker requires different parameters it is necessary to use a wrapper script that massages the parameters before invoking the real linker. It may be useful to control the exact invocation by using the verbose switch.

Next: Improving Performance, Previous: Linking Using gnatlink, Up: Top

## 6 The GNAT Make Program `gnatmake`

A typical development cycle when working on an Ada program consists of the following steps:

1. Edit some sources to fix bugs.
2. Add enhancements.
3. Compile all sources affected.
4. Rebind and relink.
5. Test.

The third step can be tricky, because not only do the modified files have to be compiled, but any files depending on these files must also be recompiled. The dependency rules in Ada can be quite complex, especially in the presence of overloading, `use` clauses, generics and inlined subprograms.

`gnatmake` automatically takes care of the third and fourth steps of this process. It determines which sources need to be compiled, compiles them, and binds and links the resulting object files.

Unlike some other Ada make programs, the dependencies are always accurately recomputed from the new sources. The source based approach of the GNAT compilation model makes this possible. This means that if changes to the source program cause corresponding changes in dependencies, they will always be tracked exactly correctly by `gnatmake`.

Next: Switches for gnatmake, Up: The GNAT Make Program gnatmake

### 6.1 Running `gnatmake`

The usual form of the `gnatmake` command is

         $ gnatmake [switches] file_name
               [file_names] [mode_switches]

The only required argument is one file_name, which specifies a compilation unit that is a main program. Several file_names can be specified: this will result in several executables being built. If `switches` are present, they can be placed before the first file_name, between file_names or after the last file_name. If mode_switches are present, they must always be placed after the last file_name and all `switches`.

If you are using standard file extensions (`.adb` and `.ads`), then the extension may be omitted from the file_name arguments. However, if you are using non-standard extensions, then it is required that the extension be given. A relative or absolute directory path can be specified in a file_name, in which case, the input source file will be searched for in the specified directory only. Otherwise, the input source file will first be searched in the directory where `gnatmake` was invoked and if it is not found, it will be search on the source path of the compiler as described in Search Paths and the Run-Time Library (RTL).

All `gnatmake` output (except when you specify `-M`) is to `stderr`. The output produced by the `-M` switch is send to `stdout`.

Next: Mode Switches for gnatmake, Previous: Running gnatmake, Up: The GNAT Make Program gnatmake

### 6.2 Switches for `gnatmake`

You may specify any of the following switches to `gnatmake`:

`--version`
  Display Copyright and version, then exit disregarding all other options.
`--help`
  If `--version` was not used, display usage, then exit disregarding all other options.
`--GCC=compiler_name`
  Program used for compiling. The default is ``gcc`'. You need to use quotes around compiler_name if `compiler_name` contains spaces or other separator characters. As an example `--GCC="foo -x -y"` will instruct `gnatmake` to use `foo -x -y` as your compiler. A limitation of this syntax is that the name and path name of the executable itself must not include any embedded spaces. Note that switch `-c` is always inserted after your command name. Thus in the above example the compiler command that will be used by `gnatmake` will be `foo -c -x -y`. If several `--GCC=compiler_name` are used, only the last compiler_name is taken into account. However, all the additional switches are also taken into account. Thus, `--GCC="foo -x -y" --GCC="bar -z -t"` is equivalent to `--GCC="bar -x -y -z -t"`.
`--GNATBIND=binder_name`
  Program used for binding. The default is ``gnatbind`'. You need to use quotes around binder_name if binder_name contains spaces or other separator characters. As an example `--GNATBIND="bar -x -y"` will instruct `gnatmake` to use `bar -x -y` as your binder. Binder switches that are normally appended by `gnatmake` to ``gnatbind`' are now appended to the end of `bar -x -y`. A limitation of this syntax is that the name and path name of the executable itself must not include any embedded spaces.
`--GNATLINK=linker_name`
  Program used for linking. The default is ``gnatlink`'. You need to use quotes around linker_name if linker_name contains spaces or other separator characters. As an example `--GNATLINK="lan -x -y"` will instruct `gnatmake` to use `lan -x -y` as your linker. Linker switches that are normally appended by `gnatmake` to ``gnatlink`' are now appended to the end of `lan -x -y`. A limitation of this syntax is that the name and path name of the executable itself must not include any embedded spaces.
`--subdirs=subdir`
  Actual object directory of each project file is the subdirectory subdir of the object directory specified or defaulted in the project file.
`--single-compile-per-obj-dir`
  Disallow simultaneous compilations in the same object directory when project files are used.
`--unchecked-shared-lib-imports`
  By default, shared library projects are not allowed to import static library projects. When this switch is used on the command line, this restriction is relaxed.
`--source-info=<source info file>`
  Specify a source info file. This switch is active only when project files are used. If the source info file is specified as a relative path, then it is relative to the object directory of the main project. If the source info file does not exist, then after the Project Manager has successfully parsed and processed the project files and found the sources, it creates the source info file. If the source info file already exists and can be read successfully, then the Project Manager will get all the needed information about the sources from the source info file and will not look for them. This reduces the time to process the project files, especially when looking for sources that take a long time. If the source info file exists but cannot be parsed successfully, the Project Manager will attempt to recreate it. If the Project Manager fails to create the source info file, a message is issued, but gnatmake does not fail. `gnatmake` "trusts" the source info file. This means that if the source files have changed (addition, deletion, moving to a different source directory), then the source info file need to be deleted and recreated.
`--create-map-file`
  When linking an executable, create a map file. The name of the map file has the same name as the executable with extension ".map".
`--create-map-file=mapfile`
  When linking an executable, create a map file. The name of the map file is "mapfile".
`-a`
  Consider all files in the make process, even the GNAT internal system files (for example, the predefined Ada library files), as well as any locked files. Locked files are files whose ALI file is write-protected. By default, `gnatmake` does not check these files, because the assumption is that the GNAT internal files are properly up to date, and also that any write protected ALI files have been properly installed. Note that if there is an installation problem, such that one of these files is not up to date, it will be properly caught by the binder. You may have to specify this switch if you are working on GNAT itself. The switch `-a` is also useful in conjunction with `-f` if you need to recompile an entire application, including run-time files, using special configuration pragmas, such as a `Normalize_Scalars` pragma.

  By default `gnatmake -a` compiles all GNAT internal files with `gcc -c -gnatpg` rather than `gcc -c`.

`-b`
  Bind only. Can be combined with `-c` to do compilation and binding, but no link. Can be combined with `-l` to do binding and linking. When not combined with `-c` all the units in the closure of the main program must have been previously compiled and must be up to date. The root unit specified by file_name may be given without extension, with the source extension or, if no GNAT Project File is specified, with the ALI file extension.
`-c`
  Compile only. Do not perform binding, except when `-b` is also specified. Do not perform linking, except if both `-b` and `-l` are also specified. If the root unit specified by file_name is not a main unit, this is the default. Otherwise `gnatmake` will attempt binding and linking unless all objects are up to date and the executable is more recent than the objects.
`-C`
  Use a temporary mapping file. A mapping file is a way to communicate to the compiler two mappings: from unit names to file names (without any directory information) and from file names to path names (with full directory information). A mapping file can make the compiler's file searches faster, especially if there are many source directories, or the sources are read over a slow network connection. If `-P` is used, a mapping file is always used, so `-C` is unnecessary; in this case the mapping file is initially populated based on the project file. If `-C` is used without `-P`, the mapping file is initially empty. Each invocation of the compiler will add any newly accessed sources to the mapping file.
`-C=file`
  Use a specific mapping file. The file, specified as a path name (absolute or relative) by this switch, should already exist, otherwise the switch is ineffective. The specified mapping file will be communicated to the compiler. This switch is not compatible with a project file (-Pfile) or with multiple compiling processes (-jnnn, when nnn is greater than 1).
`-d`
  Display progress for each source, up to date or not, as a single line

                completed x out of y (zz%)

  If the file needs to be compiled this is displayed after the invocation of the compiler. These lines are displayed even in quiet output mode.

`-D dir`
  Put all object files and ALI file in directory dir. If the `-D` switch is not used, all object files and ALI files go in the current working directory.

  This switch cannot be used when using a project file.

`-eInnn`
  Indicates that the main source is a multi-unit source and the rank of the unit in the source file is nnn. nnn needs to be a positive number and a valid index in the source. This switch cannot be used when `gnatmake` is invoked for several mains.
`-eL`
  Follow all symbolic links when processing project files. This should be used if your project uses symbolic links for files or directories, but is not needed in other cases.

  This also assumes that no directory matches the naming scheme for files (for instance that you do not have a directory called "sources.ads" when using the default GNAT naming scheme).

  When you do not have to use this switch (i.e. by default), gnatmake is able to save a lot of system calls (several per source file and object file), which can result in a significant speed up to load and manipulate a project file, especially when using source files from a remote system.

`-eS`
  Output the commands for the compiler, the binder and the linker on standard output, instead of standard error.
`-f`
  Force recompilations. Recompile all sources, even though some object files may be up to date, but don't recompile predefined or GNAT internal files or locked files (files with a write-protected ALI file), unless the `-a` switch is also specified.
`-F`
  When using project files, if some errors or warnings are detected during parsing and verbose mode is not in effect (no use of switch -v), then error lines start with the full path name of the project file, rather than its simple file name.
`-g`
  Enable debugging. This switch is simply passed to the compiler and to the linker.
`-i`
  In normal mode, `gnatmake` compiles all object files and ALI files into the current directory. If the `-i` switch is used, then instead object files and ALI files that already exist are overwritten in place. This means that once a large project is organized into separate directories in the desired manner, then `gnatmake` will automatically maintain and update this organization. If no ALI files are found on the Ada object path (Search Paths and the Run-Time Library (RTL)), the new object and ALI files are created in the directory containing the source being compiled. If another organization is desired, where objects and sources are kept in different directories, a useful technique is to create dummy ALI files in the desired directories. When detecting such a dummy file, `gnatmake` will be forced to recompile the corresponding source file, and it will be put the resulting object and ALI files in the directory where it found the dummy file.
`-jn`
  Use n processes to carry out the (re)compilations. On a multiprocessor machine compilations will occur in parallel. In the event of compilation errors, messages from various compilations might get interspersed (but `gnatmake` will give you the full ordered list of failing compiles at the end). If this is problematic, rerun the make process with n set to 1 to get a clean list of messages.
`-k`
  Keep going. Continue as much as possible after a compilation error. To ease the programmer's task in case of compilation errors, the list of sources for which the compile fails is given when `gnatmake` terminates.

  If `gnatmake` is invoked with several `file_names` and with this switch, if there are compilation errors when building an executable, `gnatmake` will not attempt to build the following executables.

`-l`
  Link only. Can be combined with `-b` to binding and linking. Linking will not be performed if combined with `-c` but not with `-b`. When not combined with `-b` all the units in the closure of the main program must have been previously compiled and must be up to date, and the main program needs to have been bound. The root unit specified by file_name may be given without extension, with the source extension or, if no GNAT Project File is specified, with the ALI file extension.
`-m`
  Specify that the minimum necessary amount of recompilations be performed. In this mode `gnatmake` ignores time stamp differences when the only modifications to a source file consist in adding/removing comments, empty lines, spaces or tabs. This means that if you have changed the comments in a source file or have simply reformatted it, using this switch will tell `gnatmake` not to recompile files that depend on it (provided other sources on which these files depend have undergone no semantic modifications). Note that the debugging information may be out of date with respect to the sources if the `-m` switch causes a compilation to be switched, so the use of this switch represents a trade-off between compilation time and accurate debugging information.
`-M`
  Check if all objects are up to date. If they are, output the object dependences to `stdout` in a form that can be directly exploited in a `Makefile`. By default, each source file is prefixed with its (relative or absolute) directory name. This name is whatever you specified in the various `-aI` and `-I` switches. If you use `gnatmake -M` `-q` (see below), only the source file names, without relative paths, are output. If you just specify the `-M` switch, dependencies of the GNAT internal system files are omitted. This is typically what you want. If you also specify the `-a` switch, dependencies of the GNAT internal files are also listed. Note that dependencies of the objects in external Ada libraries (see switch `-aL` dir in the following list) are never reported.
`-n`
  Don't compile, bind, or link. Checks if all objects are up to date. If they are not, the full name of the first file that needs to be recompiled is printed. Repeated use of this option, followed by compiling the indicated source file, will eventually result in recompiling all required units.
`-o exec_name`
  Output executable name. The name of the final executable program will be exec_name. If the `-o` switch is omitted the default name for the executable will be the name of the input file in appropriate form for an executable file on the host system.

  This switch cannot be used when invoking `gnatmake` with several `file_names`.

`-p or --create-missing-dirs`
  When using project files (-Pproject), create automatically missing object directories, library directories and exec directories.
`-Pproject`
  Use project file project. Only one such switch can be used. See gnatmake and Project Files.
`-q`
  Quiet. When this flag is not set, the commands carried out by `gnatmake` are displayed.
`-s`
  Recompile if compiler switches have changed since last compilation. All compiler switches but -I and -o are taken into account in the following way: orders between different “first letter” switches are ignored, but orders between same switches are taken into account. For example, `-O -O2` is different than `-O2 -O`, but `-g -O` is equivalent to `-O -g`.

  This switch is recommended when Integrated Preprocessing is used.

`-u`
  Unique. Recompile at most the main files. It implies -c. Combined with -f, it is equivalent to calling the compiler directly. Note that using -u with a project file and no main has a special meaning (see Project Files and Main Subprograms).
`-U`
  When used without a project file or with one or several mains on the command line, is equivalent to -u. When used with a project file and no main on the command line, all sources of all project files are checked and compiled if not up to date, and libraries are rebuilt, if necessary.
`-v`
  Verbose. Display the reason for all recompilations `gnatmake` decides are necessary, with the highest verbosity level.
`-vl`
  Verbosity level Low. Display fewer lines than in verbosity Medium.
`-vm`
  Verbosity level Medium. Potentially display fewer lines than in verbosity High.
`-vh`
  Verbosity level High. Equivalent to -v.
`-vPx`
  Indicate the verbosity of the parsing of GNAT project files. See Switches Related to Project Files.
`-x`
  Indicate that sources that are not part of any Project File may be compiled. Normally, when using Project Files, only sources that are part of a Project File may be compile. When this switch is used, a source outside of all Project Files may be compiled. The ALI file and the object file will be put in the object directory of the main Project. The compilation switches used will only be those specified on the command line. Even when `-x` is used, mains specified on the command line need to be sources of a project file.
`-Xname=value`
  Indicate that external variable name has the value value. The Project Manager will use this value for occurrences of `external(name)` when parsing the project file. See Switches Related to Project Files.
`-z`
  No main subprogram. Bind and link the program even if the unit name given on the command line is a package name. The resulting executable will execute the elaboration routines of the package and its closure, then the finalization routines.

`gcc` switches
  Any uppercase or multi-character switch that is not a `gnatmake` switch is passed to `gcc` (e.g. `-O`, `-gnato,` etc.)

Source and library search path switches:

`-aIdir`
  When looking for source files also look in directory dir. The order in which source files search is undertaken is described in Search Paths and the Run-Time Library (RTL).
`-aLdir`
  Consider dir as being an externally provided Ada library. Instructs `gnatmake` to skip compilation units whose `.ALI` files have been located in directory dir. This allows you to have missing bodies for the units in dir and to ignore out of date bodies for the same units. You still need to specify the location of the specs for these units by using the switches `-aIdir` or `-Idir`. Note: this switch is provided for compatibility with previous versions of `gnatmake`. The easier method of causing standard libraries to be excluded from consideration is to write-protect the corresponding ALI files.
`-aOdir`
  When searching for library and object files, look in directory dir. The order in which library files are searched is described in Search Paths for gnatbind.
`-Adir`
  Equivalent to `-aLdir -aIdir`.
`-Idir`
  Equivalent to `-aOdir -aIdir`.
`-I-`
  Do not look for source files in the directory containing the source file named in the command line. Do not look for ALI or object files in the directory where `gnatmake` was invoked.
`-Ldir`
  Add directory dir to the list of directories in which the linker will search for libraries. This is equivalent to `-largs -L` dir. Furthermore, under Windows, the sources pointed to by the libraries path set in the registry are not searched for.
`-nostdinc`
  Do not look for source files in the system default directory.
`-nostdlib`
  Do not look for library files in the system default directory.
`--RTS=rts-path`
  Specifies the default location of the runtime library. GNAT looks for the runtime in the following directories, and stops as soon as a valid runtime is found (`adainclude` or `ada_source_path`, and `adalib` or `ada_object_path` present):
  - <current directory>/$rts_path
  - <default-search-dir>/$rts_path
  - <default-search-dir>/rts-$rts_path

  The selected path is handled like a normal RTS path.

Next: Notes on the Command Line, Previous: Switches for gnatmake, Up: The GNAT Make Program gnatmake

### 6.3 Mode Switches for `gnatmake`

The mode switches (referred to as `mode_switches`) allow the inclusion of switches that are to be passed to the compiler itself, the binder or the linker. The effect of a mode switch is to cause all subsequent switches up to the end of the switch list, or up to the next mode switch, to be interpreted as switches to be passed on to the designated component of GNAT.

`-cargs switches`
  Compiler switches. Here switches is a list of switches that are valid switches for `gcc`. They will be passed on to all compile steps performed by `gnatmake`.
`-bargs switches`
  Binder switches. Here switches is a list of switches that are valid switches for `gnatbind`. They will be passed on to all bind steps performed by `gnatmake`.
`-largs switches`
  Linker switches. Here switches is a list of switches that are valid switches for `gnatlink`. They will be passed on to all link steps performed by `gnatmake`.
`-margs switches`
  Make switches. The switches are directly interpreted by `gnatmake`, regardless of any previous occurrence of `-cargs`, `-bargs` or `-largs`.

Next: How gnatmake Works, Previous: Mode Switches for gnatmake, Up: The GNAT Make Program gnatmake

### 6.4 Notes on the Command Line

This section contains some additional useful notes on the operation of the `gnatmake` command.

- If `gnatmake` finds no ALI files, it recompiles the main program and all other units required by the main program. This means that `gnatmake` can be used for the initial compile, as well as during subsequent steps of the development cycle.
- If you enter `gnatmake` file`.adb`, where `file.adb` is a subunit or body of a generic unit, `gnatmake` recompiles `file.adb` (because it finds no ALI) and stops, issuing a warning.
- In `gnatmake` the switch `-I` is used to specify both source and library file paths. Use `-aI` instead if you just want to specify source paths only and `-aO` if you want to specify library paths only.
- `gnatmake` will ignore any files whose ALI file is write-protected. This may conveniently be used to exclude standard libraries from consideration and in particular it means that the use of the `-f` switch will not recompile these files unless `-a` is also specified.
- `gnatmake` has been designed to make the use of Ada libraries particularly convenient. Assume you have an Ada library organized as follows: obj-dir contains the objects and ALI files for of your Ada compilation units, whereas include-dir contains the specs of these units, but no bodies. Then to compile a unit stored in `main.adb`, which uses this Ada library you would just type

                $ gnatmake -aIinclude-dir  -aLobj-dir  main

- Using `gnatmake` along with the `-m (minimal recompilation)` switch provides a mechanism for avoiding unnecessary recompilations. Using this switch, you can update the comments/format of your source files without having to recompile everything. Note, however, that adding or deleting lines in a source files may render its debugging info obsolete. If the file in question is a spec, the impact is rather limited, as that debugging info will only be useful during the elaboration phase of your program. For bodies the impact can be more significant. In all events, your debugger will warn you if a source file is more recent than the corresponding object, and alert you to the fact that the debugging information may be out of date.

Next: Examples of gnatmake Usage, Previous: Notes on the Command Line, Up: The GNAT Make Program gnatmake

### 6.5 How `gnatmake` Works

Generally `gnatmake` automatically performs all necessary recompilations and you don't need to worry about how it works. However, it may be useful to have some basic understanding of the `gnatmake` approach and in particular to understand how it uses the results of previous compilations without incorrectly depending on them.

First a definition: an object file is considered up to date if the corresponding ALI file exists and if all the source files listed in the dependency section of this ALI file have time stamps matching those in the ALI file. This means that neither the source file itself nor any files that it depends on have been modified, and hence there is no need to recompile this file.

`gnatmake` works by first checking if the specified main unit is up to date. If so, no compilations are required for the main unit. If not, `gnatmake` compiles the main program to build a new ALI file that reflects the latest sources. Then the ALI file of the main unit is examined to find all the source files on which the main program depends, and `gnatmake` recursively applies the above procedure on all these files.

This process ensures that `gnatmake` only trusts the dependencies in an existing ALI file if they are known to be correct. Otherwise it always recompiles to determine a new, guaranteed accurate set of dependencies. As a result the program is compiled “upside down” from what may be more familiar as the required order of compilation in some other Ada systems. In particular, clients are compiled before the units on which they depend. The ability of GNAT to compile in any order is critical in allowing an order of compilation to be chosen that guarantees that `gnatmake` will recompute a correct set of new dependencies if necessary.

When invoking `gnatmake` with several file_names, if a unit is imported by several of the executables, it will be recompiled at most once.

Note: when using non-standard naming conventions (see Using Other File Names), changing through a configuration pragmas file the version of a source and invoking `gnatmake` to recompile may have no effect, if the previous version of the source is still accessible by `gnatmake`. It may be necessary to use the switch -f.

Previous: How gnatmake Works, Up: The GNAT Make Program gnatmake

### 6.6 Examples of `gnatmake` Usage

`gnatmake hello.adb`
  Compile all files necessary to bind and link the main program `hello.adb` (containing unit `Hello`) and bind and link the resulting object files to generate an executable file `hello`.
`gnatmake main1 main2 main3`
  Compile all files necessary to bind and link the main programs `main1.adb` (containing unit `Main1`), `main2.adb` (containing unit `Main2`) and `main3.adb` (containing unit `Main3`) and bind and link the resulting object files to generate three executable files `main1`, `main2` and `main3`.
`gnatmake -q Main_Unit -cargs -O2 -bargs -l`
  Compile all files necessary to bind and link the main program unit `Main_Unit` (from file `main_unit.adb`). All compilations will be done with optimization level 2 and the order of elaboration will be listed by the binder. `gnatmake` will operate in quiet mode, not displaying commands it is executing.

Next: Renaming Files Using gnatchop, Previous: The GNAT Make Program gnatmake, Up: Top

## 7 Improving Performance

This chapter presents several topics related to program performance. It first describes some of the tradeoffs that need to be considered and some of the techniques for making your program run faster. It then documents the `gnatelim` tool and unused subprogram/data elimination feature, which can reduce the size of program executables.

Next: Text_IO Suggestions, Up: Improving Performance

### 7.1 Performance Considerations

The GNAT system provides a number of options that allow a trade-off between

- performance of the generated code
- speed of compilation
- minimization of dependences and recompilation
- the degree of run-time checking.

The defaults (if no options are selected) aim at improving the speed of compilation and minimizing dependences, at the expense of performance of the generated code:

- no optimization
- no inlining of subprogram calls
- all run-time checks enabled except overflow and elaboration checks

These options are suitable for most program development purposes. This chapter describes how you can modify these choices, and also provides some guidelines on debugging optimized code.

Next: Use of Restrictions, Up: Performance Considerations

#### 7.1.1 Controlling Run-Time Checks

By default, GNAT generates all run-time checks, except integer overflow checks, stack overflow checks, and checks for access before elaboration on subprogram calls. The latter are not required in default mode, because all necessary checking is done at compile time. Two gnat switches, `-gnatp` and `-gnato` allow this default to be modified. See Run-Time Checks.

Our experience is that the default is suitable for most development purposes.

We treat integer overflow specially because these are quite expensive and in our experience are not as important as other run-time checks in the development process. Note that division by zero is not considered an overflow check, and divide by zero checks are generated where required by default.

Elaboration checks are off by default, and also not needed by default, since GNAT uses a static elaboration analysis approach that avoids the need for run-time checking. This manual contains a full chapter discussing the issue of elaboration checks, and if the default is not satisfactory for your use, you should read this chapter.

For validity checks, the minimal checks required by the Ada Reference Manual (for case statements and assignments to array elements) are on by default. These can be suppressed by use of the `-gnatVn` switch. Note that in Ada 83, there were no validity checks, so if the Ada 83 mode is acceptable (or when comparing GNAT performance with an Ada 83 compiler), it may be reasonable to routinely use `-gnatVn`. Validity checks are also suppressed entirely if `-gnatp` is used.

Note that the setting of the switches controls the default setting of the checks. They may be modified using either `pragma Suppress` (to remove checks) or `pragma Unsuppress` (to add back suppressed checks) in the program source.

Next: Optimization Levels, Previous: Controlling Run-Time Checks, Up: Performance Considerations

#### 7.1.2 Use of Restrictions

The use of pragma Restrictions allows you to control which features are permitted in your program. Apart from the obvious point that if you avoid relatively expensive features like finalization (enforceable by the use of pragma Restrictions (No_Finalization), the use of this pragma does not affect the generated code in most cases.

One notable exception to this rule is that the possibility of task abort results in some distributed overhead, particularly if finalization or exception handlers are used. The reason is that certain sections of code have to be marked as non-abortable.

If you use neither the `abort` statement, nor asynchronous transfer of control (`select ... then abort`), then this distributed overhead is removed, which may have a general positive effect in improving overall performance. Especially code involving frequent use of tasking constructs and controlled types will show much improved performance. The relevant restrictions pragmas are

            pragma Restrictions (No_Abort_Statements);
            pragma Restrictions (Max_Asynchronous_Select_Nesting => 0);

It is recommended that these restriction pragmas be used if possible. Note that this also means that you can write code without worrying about the possibility of an immediate abort at any point.

Next: Debugging Optimized Code, Previous: Use of Restrictions, Up: Performance Considerations

#### 7.1.3 Optimization Levels

Without any optimization option, the compiler's goal is to reduce the cost of compilation and to make debugging produce the expected results. Statements are independent: if you stop the program with a breakpoint between statements, you can then assign a new value to any variable or change the program counter to any other statement in the subprogram and get exactly the results you would expect from the source code.

Turning on optimization makes the compiler attempt to improve the performance and/or code size at the expense of compilation time and possibly the ability to debug the program.

If you use multiple -O options, with or without level numbers, the last such option is the one that is effective.

The default is optimization off. This results in the fastest compile times, but GNAT makes absolutely no attempt to optimize, and the generated programs are considerably larger and slower than when optimization is enabled. You can use the `-O` switch (the permitted forms are `-O0`, `-O1` `-O2`, `-O3`, and `-Os`) to `gcc` to control the optimization level:

`-O0`
  No optimization (the default); generates unoptimized code but has the fastest compilation time.

  Note that many other compilers do fairly extensive optimization even if “no optimization” is specified. With gcc, it is very unusual to use -O0 for production if execution time is of any concern, since -O0 really does mean no optimization at all. This difference between gcc and other compilers should be kept in mind when doing performance comparisons.

`-O1`
  Moderate optimization; optimizes reasonably well but does not degrade compilation time significantly.
`-O2`
  Full optimization; generates highly optimized code and has the slowest compilation time.
`-O3`
  Full optimization as in `-O2`; also uses more aggressive automatic inlining of subprograms within a unit (see Inlining of Subprograms) and attempts to vectorize loops.
`-Os`
  Optimize space usage (code and data) of resulting program.

Higher optimization levels perform more global transformations on the program and apply more expensive analysis algorithms in order to generate faster and more compact code. The price in compilation time, and the resulting improvement in execution time, both depend on the particular application and the hardware environment. You should experiment to find the best level for your application.

Since the precise set of optimizations done at each level will vary from release to release (and sometime from target to target), it is best to think of the optimization settings in general terms. See Options That Control Optimization, for details about the `-O` settings and a number of `-f` options that individually enable or disable specific optimizations.

Unlike some other compilation systems, `gcc` has been tested extensively at all optimization levels. There are some bugs which appear only with optimization turned on, but there have also been bugs which show up only in unoptimized code. Selecting a lower level of optimization does not improve the reliability of the code generator, which in practice is highly reliable at all optimization levels.

Note regarding the use of `-O3`: The use of this optimization level is generally discouraged with GNAT, since it often results in larger executables which may run more slowly. See further discussion of this point in Inlining of Subprograms.

Next: Inlining of Subprograms, Previous: Optimization Levels, Up: Performance Considerations

#### 7.1.4 Debugging Optimized Code

Although it is possible to do a reasonable amount of debugging at nonzero optimization levels, the higher the level the more likely that source-level constructs will have been eliminated by optimization. For example, if a loop is strength-reduced, the loop control variable may be completely eliminated and thus cannot be displayed in the debugger. This can only happen at `-O2` or `-O3`. Explicit temporary variables that you code might be eliminated at level `-O1` or higher.

The use of the `-g` switch, which is needed for source-level debugging, affects the size of the program executable on disk, and indeed the debugging information can be quite large. However, it has no effect on the generated code (and thus does not degrade performance)

Since the compiler generates debugging tables for a compilation unit before it performs optimizations, the optimizing transformations may invalidate some of the debugging data. You therefore need to anticipate certain anomalous situations that may arise while debugging optimized code. These are the most common cases:

1. The “hopping Program Counter”: Repeated `step` or `next` commands show the PC bouncing back and forth in the code. This may result from any of the following optimizations:
   - Common subexpression elimination: using a single instance of code for a quantity that the source computes several times. As a result you may not be able to stop on what looks like a statement.
   - Invariant code motion: moving an expression that does not change within a loop, to the beginning of the loop.
   - Instruction scheduling: moving instructions so as to overlap loads and stores (typically) with other code, or in general to move computations of values closer to their uses. Often this causes you to pass an assignment statement without the assignment happening and then later bounce back to the statement when the value is actually needed. Placing a breakpoint on a line of code and then stepping over it may, therefore, not always cause all the expected side-effects.
2. The “big leap”: More commonly known as cross-jumping, in which two identical pieces of code are merged and the program counter suddenly jumps to a statement that is not supposed to be executed, simply because it (and the code following) translates to the same thing as the code that was supposed to be executed. This effect is typically seen in sequences that end in a jump, such as a `goto`, a `return`, or a `break` in a C `switch` statement.
3. The “roving variable”: The symptom is an unexpected value in a variable. There are various reasons for this effect:
   - In a subprogram prologue, a parameter may not yet have been moved to its “home”.
   - A variable may be dead, and its register re-used. This is probably the most common cause.
   - As mentioned above, the assignment of a value to a variable may have been moved.
   - A variable may be eliminated entirely by value propagation or other means. In this case, GCC may incorrectly generate debugging information for the variable

   In general, when an unexpected value appears for a local variable or parameter you should first ascertain if that value was actually computed by your program, as opposed to being incorrectly reported by the debugger. Record fields or array elements in an object designated by an access value are generally less of a problem, once you have ascertained that the access value is sensible. Typically, this means checking variables in the preceding code and in the calling subprogram to verify that the value observed is explainable from other values (one must apply the procedure recursively to those other values); or re-running the code and stopping a little earlier (perhaps before the call) and stepping to better see how the variable obtained the value in question; or continuing to step from the point of the strange value to see if code motion had simply moved the variable's assignments later.

In light of such anomalies, a recommended technique is to use `-O0` early in the software development cycle, when extensive debugging capabilities are most needed, and then move to `-O1` and later `-O2` as the debugger becomes less critical. Whether to use the `-g` switch in the release version is a release management issue. Note that if you use `-g` you can then use the `strip` program on the resulting executable, which removes both debugging information and global symbols.

Next: Vectorization of loops, Previous: Debugging Optimized Code, Up: Performance Considerations

#### 7.1.5 Inlining of Subprograms

A call to a subprogram in the current unit is inlined if all the following conditions are met:

- The optimization level is at least `-O1`.
- The called subprogram is suitable for inlining: It must be small enough and not contain something that `gcc` cannot support in inlined subprograms.
- Any one of the following applies: `pragma Inline` is applied to the subprogram and the `-gnatn` switch is specified; the subprogram is local to the unit and called once from within it; the subprogram is small and optimization level `-O2` is specified; optimization level `-O3` is specified.

Calls to subprograms in `with`'ed units are normally not inlined. To achieve actual inlining (that is, replacement of the call by the code in the body of the subprogram), the following conditions must all be true:

- The optimization level is at least `-O1`.
- The called subprogram is suitable for inlining: It must be small enough and not contain something that `gcc` cannot support in inlined subprograms.
- The call appears in a body (not in a package spec).
- There is a `pragma Inline` for the subprogram.
- The `-gnatn` switch is used on the command line.

Even if all these conditions are met, it may not be possible for the compiler to inline the call, due to the length of the body, or features in the body that make it impossible for the compiler to do the inlining.

Note that specifying the `-gnatn` switch causes additional compilation dependencies. Consider the following:

         package R is
            procedure Q;
            pragma Inline (Q);
         end R;
         package body R is
            ...
         end R;

         with R;
         procedure Main is
         begin
            ...
            R.Q;
         end Main;

With the default behavior (no `-gnatn` switch specified), the compilation of the `Main` procedure depends only on its own source, `main.adb`, and the spec of the package in file `r.ads`. This means that editing the body of `R` does not require recompiling `Main`.

On the other hand, the call `R.Q` is not inlined under these circumstances. If the `-gnatn` switch is present when `Main` is compiled, the call will be inlined if the body of `Q` is small enough, but now `Main` depends on the body of `R` in `r.adb` as well as on the spec. This means that if this body is edited, the main program must be recompiled. Note that this extra dependency occurs whether or not the call is in fact inlined by `gcc`.

The use of front end inlining with `-gnatN` generates similar additional dependencies.

Note: The `-fno-inline` switch can be used to prevent all inlining. This switch overrides all other conditions and ensures that no inlining occurs. The extra dependences resulting from `-gnatn` will still be active, even if this switch is used to suppress the resulting inlining actions.

Note: The `-fno-inline-functions` switch can be used to prevent automatic inlining of subprograms if `-O3` is used.

Note: The `-fno-inline-small-functions` switch can be used to prevent automatic inlining of small subprograms if `-O2` is used.

Note: The `-fno-inline-functions-called-once` switch can be used to prevent inlining of subprograms local to the unit and called once from within it if `-O1` is used.

Note regarding the use of `-O3`: `-gnatn` is made up of two sub-switches `-gnatn1` and `-gnatn2` that can be directly specified in lieu of it, `-gnatn` being translated into one of them based on the optimization level. With `-O2` or below, `-gnatn` is equivalent to `-gnatn1` which activates pragma `Inline` with moderate inlining across modules. With `-O3`, `-gnatn` is equivalent to `-gnatn2` which activates pragma `Inline` with full inlining across modules. If you have used pragma `Inline` in appropriate cases, then it is usually much better to use `-O2` and `-gnatn` and avoid the use of `-O3` which has the additional effect of inlining subprograms you did not think should be inlined. We have found that the use of `-O3` may slow down the compilation and increase the code size by performing excessive inlining, leading to increased instruction cache pressure from the increased code size and thus minor performance improvements. So the bottom line here is that you should not automatically assume that `-O3` is better than `-O2`, and indeed you should use `-O3` only if tests show that it actually improves performance for your program.

Next: Other Optimization Switches, Previous: Inlining of Subprograms, Up: Performance Considerations

#### 7.1.6 Vectorization of loops

You can take advantage of the auto-vectorizer present in the `gcc` back end to vectorize loops with GNAT. The corresponding command line switch is `-ftree-vectorize` but, as it is enabled by default at `-O3` and other aggressive optimizations helpful for vectorization also are enabled by default at this level, using `-O3` directly is recommended.

You also need to make sure that the target architecture features a supported SIMD instruction set. For example, for the x86 architecture, you should at least specify `-msse2` to get significant vectorization (but you don't need to specify it for x86-64 as it is part of the base 64-bit architecture). Similarly, for the PowerPC architecture, you should specify `-maltivec`.

The preferred loop form for vectorization is the `for` iteration scheme. Loops with a `while` iteration scheme can also be vectorized if they are very simple, but the vectorizer will quickly give up otherwise. With either iteration scheme, the flow of control must be straight, in particular no `exit` statement may appear in the loop body. The loop may however contain a single nested loop, if it can be vectorized when considered alone:

            A : array (1..4, 1..4) of Long_Float;
            S : array (1..4) of Long_Float;

            procedure Sum is
            begin
               for I in A'Range(1) loop
                  for J in A'Range(2) loop
                     S (I) := S (I) + A (I, J);
                  end loop;
               end loop;
            end Sum;

The vectorizable operations depend on the targeted SIMD instruction set, but the adding and some of the multiplying operators are generally supported, as well as the logical operators for modular types. Note that, in the former case, enabling overflow checks, for example with `-gnato`, totally disables vectorization. The other checks are not supposed to have the same definitive effect, although compiling with `-gnatp` might well reveal cases where some checks do thwart vectorization.

Type conversions may also prevent vectorization if they involve semantics that are not directly supported by the code generator or the SIMD instruction set. A typical example is direct conversion from floating-point to integer types. The solution in this case is to use the following idiom:

            Integer (S'Truncation (F))

if `S` is the subtype of floating-point object `F`.

In most cases, the vectorizable loops are loops that iterate over arrays. All kinds of array types are supported, i.e. constrained array types with static bounds:

            type Array_Type is array (1 .. 4) of Long_Float;

constrained array types with dynamic bounds:

            type Array_Type is array (1 .. Q.N) of Long_Float;

            type Array_Type is array (Q.K .. 4) of Long_Float;

            type Array_Type is array (Q.K .. Q.N) of Long_Float;

or unconstrained array types:

           type Array_Type is array (Positive range <>) of Long_Float;

The quality of the generated code decreases when the dynamic aspect of the array type increases, the worst code being generated for unconstrained array types. This is so because, the less information the compiler has about the bounds of the array, the more fallback code it needs to generate in order to fix things up at run time.

It is possible to specify that a given loop should be subject to vectorization preferably to other optimizations by means of pragma `Loop_Optimize`:

           pragma Loop_Optimize (Vector);

placed immediately within the loop will convey the appropriate hint to the compiler for this loop.

You can obtain information about the vectorization performed by the compiler by specifying `-ftree-vectorizer-verbose=N`. For more details of this switch, see Options for Debugging Your Program or GCC.

Next: Optimization and Strict Aliasing, Previous: Vectorization of loops, Up: Performance Considerations

#### 7.1.7 Other Optimization Switches

Since `GNAT` uses the `gcc` back end, all the specialized `gcc` optimization switches are potentially usable. These switches have not been extensively tested with GNAT but can generally be expected to work. Examples of switches in this category are `-funroll-loops` and the various target-specific `-m` options (in particular, it has been observed that `-march=xxx` can significantly improve performance on appropriate machines). For full details of these switches, see Hardware Models and Configurations.

Previous: Other Optimization Switches, Up: Performance Considerations

#### 7.1.8 Optimization and Strict Aliasing

The strong typing capabilities of Ada allow an optimizer to generate efficient code in situations where other languages would be forced to make worst case assumptions preventing such optimizations. Consider the following example:

         procedure R is
            type Int1 is new Integer;
            type Int2 is new Integer;
            type Int1A is access Int1;
            type Int2A is access Int2;
            Int1V : Int1A;
            Int2V : Int2A;
            ...

         begin
            ...
            for J in Data'Range loop
               if Data (J) = Int1V.all then
                  Int2V.all := Int2V.all + 1;
               end if;
            end loop;
            ...
         end R;

In this example, since the variable `Int1V` can only access objects of type `Int1`, and `Int2V` can only access objects of type `Int2`, there is no possibility that the assignment to `Int2V.all` affects the value of `Int1V.all`. This means that the compiler optimizer can "know" that the value `Int1V.all` is constant for all iterations of the loop and avoid the extra memory reference required to dereference it each time through the loop.

This kind of optimization, called strict aliasing analysis, is triggered by specifying an optimization level of `-O2` or higher or `-Os` and allows `GNAT` to generate more efficient code when access values are involved.

However, although this optimization is always correct in terms of the formal semantics of the Ada Reference Manual, difficulties can arise if features like `Unchecked_Conversion` are used to break the typing system. Consider the following complete program example:

         package p1 is
            type int1 is new integer;
            type int2 is new integer;
            type a1 is access int1;
            type a2 is access int2;
         end p1;

         with p1; use p1;
         package p2 is
            function to_a2 (Input : a1) return a2;
         end p2;

         with Unchecked_Conversion;
         package body p2 is
            function to_a2 (Input : a1) return a2 is
               function to_a2u is
                 new Unchecked_Conversion (a1, a2);
            begin
               return to_a2u (Input);
            end to_a2;
         end p2;

         with p2; use p2;
         with p1; use p1;
         with Text_IO; use Text_IO;
         procedure m is
            v1 : a1 := new int1;
            v2 : a2 := to_a2 (v1);
         begin
            v1.all := 1;
            v2.all := 0;
            put_line (int1'image (v1.all));
         end;

This program prints out 0 in `-O0` or `-O1` mode, but it prints out 1 in `-O2` mode. That's because in strict aliasing mode, the compiler can and does assume that the assignment to `v2.all` could not affect the value of `v1.all`, since different types are involved.

This behavior is not a case of non-conformance with the standard, since the Ada RM specifies that an unchecked conversion where the resulting bit pattern is not a correct value of the target type can result in an abnormal value and attempting to reference an abnormal value makes the execution of a program erroneous. That's the case here since the result does not point to an object of type `int2`. This means that the effect is entirely unpredictable.

However, although that explanation may satisfy a language lawyer, in practice an applications programmer expects an unchecked conversion involving pointers to create true aliases and the behavior of printing 1 seems plain wrong. In this case, the strict aliasing optimization is unwelcome.

Indeed the compiler recognizes this possibility, and the unchecked conversion generates a warning:

         p2.adb:5:07: warning: possible aliasing problem with type "a2"
         p2.adb:5:07: warning: use -fno-strict-aliasing switch for references
         p2.adb:5:07: warning:  or use "pragma No_Strict_Aliasing (a2);"

Unfortunately the problem is recognized when compiling the body of package `p2`, but the actual "bad" code is generated while compiling the body of `m` and this latter compilation does not see the suspicious `Unchecked_Conversion`.

As implied by the warning message, there are approaches you can use to avoid the unwanted strict aliasing optimization in a case like this.

One possibility is to simply avoid the use of `-O2`, but that is a bit drastic, since it throws away a number of useful optimizations that do not involve strict aliasing assumptions.

A less drastic approach is to compile the program using the option `-fno-strict-aliasing`. Actually it is only the unit containing the dereferencing of the suspicious pointer that needs to be compiled. So in this case, if we compile unit `m` with this switch, then we get the expected value of zero printed. Analyzing which units might need the switch can be painful, so a more reasonable approach is to compile the entire program with options `-O2` and `-fno-strict-aliasing`. If the performance is satisfactory with this combination of options, then the advantage is that the entire issue of possible "wrong" optimization due to strict aliasing is avoided.

To avoid the use of compiler switches, the configuration pragma `No_Strict_Aliasing` with no parameters may be used to specify that for all access types, the strict aliasing optimization should be suppressed.

However, these approaches are still overkill, in that they causes all manipulations of all access values to be deoptimized. A more refined approach is to concentrate attention on the specific access type identified as problematic.

First, if a careful analysis of uses of the pointer shows that there are no possible problematic references, then the warning can be suppressed by bracketing the instantiation of `Unchecked_Conversion` to turn the warning off:

            pragma Warnings (Off);
            function to_a2u is
              new Unchecked_Conversion (a1, a2);
            pragma Warnings (On);

Of course that approach is not appropriate for this particular example, since indeed there is a problematic reference. In this case we can take one of two other approaches.

The first possibility is to move the instantiation of unchecked conversion to the unit in which the type is declared. In this example, we would move the instantiation of `Unchecked_Conversion` from the body of package `p2` to the spec of package `p1`. Now the warning disappears. That's because any use of the access type knows there is a suspicious unchecked conversion, and the strict aliasing optimization is automatically suppressed for the type.

If it is not practical to move the unchecked conversion to the same unit in which the destination access type is declared (perhaps because the source type is not visible in that unit), you may use pragma `No_Strict_Aliasing` for the type. This pragma must occur in the same declarative sequence as the declaration of the access type:

            type a2 is access int2;
            pragma No_Strict_Aliasing (a2);

Here again, the compiler now knows that the strict aliasing optimization should be suppressed for any reference to type `a2` and the expected behavior is obtained.

Finally, note that although the compiler can generate warnings for simple cases of unchecked conversions, there are tricker and more indirect ways of creating type incorrect aliases which the compiler cannot detect. Examples are the use of address overlays and unchecked conversions involving composite types containing access types as components. In such cases, no warnings are generated, but there can still be aliasing problems. One safe coding practice is to forbid the use of address clauses for type overlaying, and to allow unchecked conversion only for primitive types. This is not really a significant restriction since any possible desired effect can be achieved by unchecked conversion of access values.

The aliasing analysis done in strict aliasing mode can certainly have significant benefits. We have seen cases of large scale application code where the time is increased by up to 5% by turning this optimization off. If you have code that includes significant usage of unchecked conversion, you might want to just stick with `-O1` and avoid the entire issue. If you get adequate performance at this level of optimization level, that's probably the safest approach. If tests show that you really need higher levels of optimization, then you can experiment with `-O2` and `-O2 -fno-strict-aliasing` to see how much effect this has on size and speed of the code. If you really need to use `-O2` with strict aliasing in effect, then you should review any uses of unchecked conversion of access types, particularly if you are getting the warnings described above.

Next: Reducing Size of Ada Executables with gnatelim, Previous: Performance Considerations, Up: Improving Performance

### 7.2 `Text_IO` Suggestions

The `Ada.Text_IO` package has fairly high overheads due in part to the requirement of maintaining page and line counts. If performance is critical, a recommendation is to use `Stream_IO` instead of `Text_IO` for volume output, since this package has less overhead.

If `Text_IO` must be used, note that by default output to the standard output and standard error files is unbuffered (this provides better behavior when output statements are used for debugging, or if the progress of a program is observed by tracking the output, e.g. by using the Unix `tail -f` command to watch redirected output.

If you are generating large volumes of output with `Text_IO` and performance is an important factor, use a designated file instead of the standard output file, or change the standard output file to be buffered using `Interfaces.C_Streams.setvbuf`.

Next: Reducing Size of Executables with unused subprogram/data elimination, Previous: Text_IO Suggestions, Up: Improving Performance

### 7.3 Reducing Size of Ada Executables with `gnatelim`

This section describes `gnatelim`, a tool which detects unused subprograms and helps the compiler to create a smaller executable for your program.

Next: Running gnatelim, Up: Reducing Size of Ada Executables with gnatelim

#### 7.3.1 About `gnatelim`

When a program shares a set of Ada packages with other programs, it may happen that this program uses only a fraction of the subprograms defined in these packages. The code created for these unused subprograms increases the size of the executable.

`gnatelim` tracks unused subprograms in an Ada program and outputs a list of GNAT-specific pragmas `Eliminate` marking all the subprograms that are declared but never called. By placing the list of `Eliminate` pragmas in the GNAT configuration file `gnat.adc` and recompiling your program, you may decrease the size of its executable, because the compiler will not generate the code for 'eliminated' subprograms. See Pragma Eliminate, for more information about this pragma.

`gnatelim` needs as its input data the name of the main subprogram.

If a set of source files is specified as `gnatelim` arguments, it treats these files as a complete set of sources making up a program to analyse, and analyses only these sources.

After a full successful build of the main subprogram `gnatelim` can be called without specifying sources to analyse, in this case it computes the source closure of the main unit from the `ALI` files.

The following command will create the set of `ALI` files needed for `gnatelim`:

         $ gnatmake -c Main_Prog

Note that `gnatelim` does not need object files.

Next: Processing Precompiled Libraries, Previous: About gnatelim, Up: Reducing Size of Ada Executables with gnatelim

#### 7.3.2 Running `gnatelim`

`gnatelim` has the following command-line interface:

         $ gnatelim [switches] -main=main_unit_name {filename} [-cargs gcc_switches]

main_unit_name should be a name of a source file that contains the main subprogram of a program (partition).

Each filename is the name (including the extension) of a source file to process. “Wildcards” are allowed, and the file name may contain path information.

‘`gcc_switches`’ is a list of switches for `gcc`. They will be passed on to all compiler invocations made by `gnatelim` to generate the ASIS trees. Here you can provide `-I` switches to form the source search path, use the `-gnatec` switch to set the configuration file, use the `-gnat05` switch if sources should be compiled in Ada 2005 mode etc.

`gnatelim` has the following switches:

`-files=filename`
  Take the argument source files from the specified file. This file should be an ordinary text file containing file names separated by spaces or line breaks. You can use this switch more than once in the same call to `gnatelim`. You also can combine this switch with an explicit list of files.
`-log`
  Duplicate all the output sent to `stderr` into a log file. The log file is named `gnatelim.log` and is located in the current directory.
`-log=filename`
  Duplicate all the output sent to `stderr` into a specified log file.

`--no-elim-dispatch`
  Do not generate pragmas for dispatching operations.
`--ignore=filename`
  Do not generate pragmas for subprograms declared in the sources listed in a specified file

`-o=report_file`
  Put `gnatelim` output into a specified file. If this file already exists, it is overridden. If this switch is not used, `gnatelim` outputs its results into `stderr`
`-q`
  Quiet mode: by default `gnatelim` outputs to the standard error stream the number of program units left to be processed. This option turns this trace off.

`-t`
  Print out execution time.
`-v`
  Verbose mode: `gnatelim` version information is printed as Ada comments to the standard output stream. Also, in addition to the number of program units left `gnatelim` will output the name of the current unit being processed.
`-wq`
  Quiet warning mode - some warnings are suppressed. In particular warnings that indicate that the analysed set of sources is incomplete to make up a partition and that some subprogram bodies are missing are not generated.

Note: to invoke `gnatelim` with a project file, use the `gnat` driver (see The GNAT Driver and Project Files).

Next: Correcting the List of Eliminate Pragmas, Previous: Running gnatelim, Up: Reducing Size of Ada Executables with gnatelim

#### 7.3.3 Processing Precompiled Libraries

If some program uses a precompiled Ada library, it can be processed by `gnatelim` in a usual way. `gnatelim` will newer generate an Eliminate pragma for a subprogram if the body of this subprogram has not been analysed, this is a typical case for subprograms from precompiled libraries. Switch `-wq` may be used to suppress warnings about missing source files and non-analyzed subprogram bodies that can be generated when processing precompiled Ada libraries.

Next: Making Your Executables Smaller, Previous: Processing Precompiled Libraries, Up: Reducing Size of Ada Executables with gnatelim

#### 7.3.4 Correcting the List of Eliminate Pragmas

In some rare cases `gnatelim` may try to eliminate subprograms that are actually called in the program. In this case, the compiler will generate an error message of the form:

         main.adb:4:08: cannot reference subprogram "P" eliminated at elim.out:5

You will need to manually remove the wrong `Eliminate` pragmas from the configuration file indicated in the error message. You should recompile your program from scratch after that, because you need a consistent configuration file(s) during the entire compilation.

Next: Summary of the gnatelim Usage Cycle, Previous: Correcting the List of Eliminate Pragmas, Up: Reducing Size of Ada Executables with gnatelim

#### 7.3.5 Making Your Executables Smaller

In order to get a smaller executable for your program you now have to recompile the program completely with the configuration file containing pragmas Eliminate generated by gnatelim. If these pragmas are placed in `gnat.adc` file located in your current directory, just do:

         $ gnatmake -f main_prog

(Use the `-f` option for `gnatmake` to recompile everything with the set of pragmas `Eliminate` that you have obtained with `gnatelim`).

Be aware that the set of `Eliminate` pragmas is specific to each program. It is not recommended to merge sets of `Eliminate` pragmas created for different programs in one configuration file.

Previous: Making Your Executables Smaller, Up: Reducing Size of Ada Executables with gnatelim

#### 7.3.6 Summary of the `gnatelim` Usage Cycle

Here is a quick summary of the steps to be taken in order to reduce the size of your executables with `gnatelim`. You may use other GNAT options to control the optimization level, to produce the debugging information, to set search path, etc.

1. Create a complete set of `ALI` files (if the program has not been built already)

                 $ gnatmake -c main_prog

2. Generate a list of `Eliminate` pragmas in default configuration file `gnat.adc` in the current directory

                 $ gnatelim main_prog >[>] gnat.adc

3. Recompile the application

                 $ gnatmake -f main_prog

Previous: Reducing Size of Ada Executables with gnatelim, Up: Improving Performance

### 7.4 Reducing Size of Executables with Unused Subprogram/Data Elimination

This section describes how you can eliminate unused subprograms and data from your executable just by setting options at compilation time.

Next: Compilation options, Up: Reducing Size of Executables with unused subprogram/data elimination

#### 7.4.1 About unused subprogram/data elimination

By default, an executable contains all code and data of its composing objects (directly linked or coming from statically linked libraries), even data or code never used by this executable.

This feature will allow you to eliminate such unused code from your executable, making it smaller (in disk and in memory).

This functionality is available on all Linux platforms except for the IA-64 architecture and on all cross platforms using the ELF binary file format. In both cases GNU binutils version 2.16 or later are required to enable it.

Next: Example of unused subprogram/data elimination, Previous: About unused subprogram/data elimination, Up: Reducing Size of Executables with unused subprogram/data elimination

#### 7.4.2 Compilation options

The operation of eliminating the unused code and data from the final executable is directly performed by the linker.

In order to do this, it has to work with objects compiled with the following options: `-ffunction-sections` `-fdata-sections`. These options are usable with C and Ada files. They will place respectively each function or data in a separate section in the resulting object file.

Once the objects and static libraries are created with these options, the linker can perform the dead code elimination. You can do this by setting the `-Wl,--gc-sections` option to gcc command or in the `-largs` section of `gnatmake`. This will perform a garbage collection of code and data never referenced.

If the linker performs a partial link (`-r` ld linker option), then you will need to provide one or several entry point using the `-e` / `--entry` ld option.

Note that objects compiled without the `-ffunction-sections` and `-fdata-sections` options can still be linked with the executable. However, no dead code elimination will be performed on those objects (they will be linked as is).

The GNAT static library is now compiled with -ffunction-sections and -fdata-sections on some platforms. This allows you to eliminate the unused code and data of the GNAT library from your executable.

Previous: Compilation options, Up: Reducing Size of Executables with unused subprogram/data elimination

#### 7.4.3 Example of unused subprogram/data elimination

Here is a simple example:

         with Aux;

         procedure Test is
         begin
            Aux.Used (10);
         end Test;

         package Aux is
            Used_Data   : Integer;
            Unused_Data : Integer;

            procedure Used   (Data : Integer);
            procedure Unused (Data : Integer);
         end Aux;

         package body Aux is
            procedure Used (Data : Integer) is
            begin
               Used_Data := Data;
            end Used;

            procedure Unused (Data : Integer) is
            begin
               Unused_Data := Data;
            end Unused;
         end Aux;

`Unused` and `Unused_Data` are never referenced in this code excerpt, and hence they may be safely removed from the final executable.

         $ gnatmake test

         $ nm test | grep used
         020015f0 T aux__unused
         02005d88 B aux__unused_data
         020015cc T aux__used
         02005d84 B aux__used_data

         $ gnatmake test -cargs -fdata-sections -ffunction-sections \
              -largs -Wl,--gc-sections

         $ nm test | grep used
         02005350 T aux__used
         0201ffe0 B aux__used_data

It can be observed that the procedure `Unused` and the object `Unused_Data` are removed by the linker when using the appropriate options.

Next: Configuration Pragmas, Previous: Improving Performance, Up: Top

## 8 Renaming Files Using `gnatchop`

This chapter discusses how to handle files with multiple units by using the `gnatchop` utility. This utility is also useful in renaming files to meet the standard GNAT default file naming conventions.

Next: Operating gnatchop in Compilation Mode, Up: Renaming Files Using gnatchop

### 8.1 Handling Files with Multiple Units

The basic compilation model of GNAT requires that a file submitted to the compiler have only one unit and there be a strict correspondence between the file name and the unit name.

The `gnatchop` utility allows both of these rules to be relaxed, allowing GNAT to process files which contain multiple compilation units and files with arbitrary file names. `gnatchop` reads the specified file and generates one or more output files, containing one unit per file. The unit and the file name correspond, as required by GNAT.

If you want to permanently restructure a set of “foreign” files so that they match the GNAT rules, and do the remaining development using the GNAT structure, you can simply use `gnatchop` once, generate the new set of files and work with them from that point on.

Alternatively, if you want to keep your files in the “foreign” format, perhaps to maintain compatibility with some other Ada compilation system, you can set up a procedure where you use `gnatchop` each time you compile, regarding the source files that it writes as temporary files that you throw away.

Note that if your file containing multiple units starts with a byte order mark (BOM) specifying UTF-8 encoding, then the files generated by gnatchop will each start with a copy of this BOM, meaning that they can be compiled automatically in UTF-8 mode without needing to specify an explicit encoding.

Next: Command Line for gnatchop, Previous: Handling Files with Multiple Units, Up: Renaming Files Using gnatchop

### 8.2 Operating gnatchop in Compilation Mode

The basic function of `gnatchop` is to take a file with multiple units and split it into separate files. The boundary between files is reasonably clear, except for the issue of comments and pragmas. In default mode, the rule is that any pragmas between units belong to the previous unit, except that configuration pragmas always belong to the following unit. Any comments belong to the following unit. These rules almost always result in the right choice of the split point without needing to mark it explicitly and most users will find this default to be what they want. In this default mode it is incorrect to submit a file containing only configuration pragmas, or one that ends in configuration pragmas, to `gnatchop`.

However, using a special option to activate “compilation mode”, `gnatchop` can perform another function, which is to provide exactly the semantics required by the RM for handling of configuration pragmas in a compilation. In the absence of configuration pragmas (at the main file level), this option has no effect, but it causes such configuration pragmas to be handled in a quite different manner.

First, in compilation mode, if `gnatchop` is given a file that consists of only configuration pragmas, then this file is appended to the `gnat.adc` file in the current directory. This behavior provides the required behavior described in the RM for the actions to be taken on submitting such a file to the compiler, namely that these pragmas should apply to all subsequent compilations in the same compilation environment. Using GNAT, the current directory, possibly containing a `gnat.adc` file is the representation of a compilation environment. For more information on the `gnat.adc` file, see Handling of Configuration Pragmas.

Second, in compilation mode, if `gnatchop` is given a file that starts with configuration pragmas, and contains one or more units, then these configuration pragmas are prepended to each of the chopped files. This behavior provides the required behavior described in the RM for the actions to be taken on compiling such a file, namely that the pragmas apply to all units in the compilation, but not to subsequently compiled units.

Finally, if configuration pragmas appear between units, they are appended to the previous unit. This results in the previous unit being illegal, since the compiler does not accept configuration pragmas that follow a unit. This provides the required RM behavior that forbids configuration pragmas other than those preceding the first compilation unit of a compilation.

For most purposes, `gnatchop` will be used in default mode. The compilation mode described above is used only if you need exactly accurate behavior with respect to compilations, and you have files that contain multiple units and configuration pragmas. In this circumstance the use of `gnatchop` with the compilation mode switch provides the required behavior, and is for example the mode in which GNAT processes the ACVC tests.

Next: Switches for gnatchop, Previous: Operating gnatchop in Compilation Mode, Up: Renaming Files Using gnatchop

### 8.3 Command Line for `gnatchop`

The `gnatchop` command has the form:

         $ gnatchop switches file name [file name ...]
               [directory]

The only required argument is the file name of the file to be chopped. There are no restrictions on the form of this file name. The file itself contains one or more Ada units, in normal GNAT format, concatenated together. As shown, more than one file may be presented to be chopped.

When run in default mode, `gnatchop` generates one output file in the current directory for each unit in each of the files.

directory, if specified, gives the name of the directory to which the output files will be written. If it is not specified, all files are written to the current directory.

For example, given a file called `hellofiles` containing

         procedure hello;

         with Text_IO; use Text_IO;
         procedure hello is
         begin
            Put_Line ("Hello");
         end hello;

the command

         $ gnatchop hellofiles

generates two files in the current directory, one called `hello.ads` containing the single line that is the procedure spec, and the other called `hello.adb` containing the remaining text. The original file is not affected. The generated files can be compiled in the normal manner.

When gnatchop is invoked on a file that is empty or that contains only empty lines and/or comments, gnatchop will not fail, but will not produce any new sources.

For example, given a file called `toto.txt` containing

         --  Just a comment

the command

         $ gnatchop toto.txt

will not produce any new file and will result in the following warnings:

         toto.txt:1:01: warning: empty file, contains no compilation units
         no compilation units found
         no source files written

Next: Examples of gnatchop Usage, Previous: Command Line for gnatchop, Up: Renaming Files Using gnatchop

### 8.4 Switches for `gnatchop`

`gnatchop` recognizes the following switches:

`--version`
  Display Copyright and version, then exit disregarding all other options.
`--help`
  If `--version` was not used, display usage, then exit disregarding all other options.
`-c`
  Causes `gnatchop` to operate in compilation mode, in which configuration pragmas are handled according to strict RM rules. See previous section for a full description of this mode.
`-gnatxxx`
  This passes the given `-gnatxxx` switch to `gnat` which is used to parse the given file. Not all xxx options make sense, but for example, the use of `-gnati2` allows `gnatchop` to process a source file that uses Latin-2 coding for identifiers.
`-h`
  Causes `gnatchop` to generate a brief help summary to the standard output file showing usage information.
`-kmm`
  Limit generated file names to the specified number `mm` of characters. This is useful if the resulting set of files is required to be interoperable with systems which limit the length of file names. No space is allowed between the `-k` and the numeric value. The numeric value may be omitted in which case a default of `-k8`, suitable for use with DOS-like file systems, is used. If no `-k` switch is present then there is no limit on the length of file names.
`-p`
  Causes the file modification time stamp of the input file to be preserved and used for the time stamp of the output file(s). This may be useful for preserving coherency of time stamps in an environment where `gnatchop` is used as part of a standard build process.
`-q`
  Causes output of informational messages indicating the set of generated files to be suppressed. Warnings and error messages are unaffected.
`-r`
  Generate `Source_Reference` pragmas. Use this switch if the output files are regarded as temporary and development is to be done in terms of the original unchopped file. This switch causes `Source_Reference` pragmas to be inserted into each of the generated files to refers back to the original file name and line number. The result is that all error messages refer back to the original unchopped file. In addition, the debugging information placed into the object file (when the `-g` switch of `gcc` or `gnatmake` is specified) also refers back to this original file so that tools like profilers and debuggers will give information in terms of the original unchopped file.

  If the original file to be chopped itself contains a `Source_Reference` pragma referencing a third file, then gnatchop respects this pragma, and the generated `Source_Reference` pragmas in the chopped file refer to the original file, with appropriate line numbers. This is particularly useful when `gnatchop` is used in conjunction with `gnatprep` to compile files that contain preprocessing statements and multiple units.

`-v`
  Causes `gnatchop` to operate in verbose mode. The version number and copyright notice are output, as well as exact copies of the gnat1 commands spawned to obtain the chop control information.
`-w`
  Overwrite existing file names. Normally `gnatchop` regards it as a fatal error if there is already a file with the same name as a file it would otherwise output, in other words if the files to be chopped contain duplicated units. This switch bypasses this check, and causes all but the last instance of such duplicated units to be skipped.
`--GCC=xxxx`
  Specify the path of the GNAT parser to be used. When this switch is used, no attempt is made to add the prefix to the GNAT parser executable.

Previous: Switches for gnatchop, Up: Renaming Files Using gnatchop

### 8.5 Examples of `gnatchop` Usage

`gnatchop -w hello_s.ada prerelease/files`
  Chops the source file `hello_s.ada`. The output files will be placed in the directory `prerelease/files`, overwriting any files with matching names in that directory (no files in the current directory are modified).
`gnatchop archive`
  Chops the source file `archive` into the current directory. One useful application of `gnatchop` is in sending sets of sources around, for example in email messages. The required sources are simply concatenated (for example, using a Unix `cat` command), and then `gnatchop` is used at the other end to reconstitute the original file names.
`gnatchop file1 file2 file3 direc`
  Chops all units in files `file1`, `file2`, `file3`, placing the resulting files in the directory `direc`. Note that if any units occur more than once anywhere within this set of files, an error message is generated, and no files are written. To override this check, use the `-w` switch, in which case the last occurrence in the last file will be the one that is output, and earlier duplicate occurrences for a given unit will be skipped.

Next: Handling Arbitrary File Naming Conventions Using gnatname, Previous: Renaming Files Using gnatchop, Up: Top

## 9 Configuration Pragmas

Configuration pragmas include those pragmas described as such in the Ada Reference Manual, as well as implementation-dependent pragmas that are configuration pragmas. See Implementation Defined Pragmas, for details on these additional GNAT-specific configuration pragmas. Most notably, the pragma `Source_File_Name`, which allows specifying non-default names for source files, is a configuration pragma. The following is a complete list of configuration pragmas recognized by GNAT:

            Ada_83
            Ada_95
            Ada_05
            Ada_2005
            Ada_12
            Ada_2012
            Annotate
            Assertion_Policy
            Assume_No_Invalid_Values
            C_Pass_By_Copy
            Check_Name
            Check_Policy
            Compile_Time_Error
            Compile_Time_Warning
            Compiler_Unit
            Component_Alignment
            Convention_Identifier
            Debug_Policy
            Detect_Blocking
            Default_Storage_Pool
            Discard_Names
            Elaboration_Checks
            Eliminate
            Extend_System
            Extensions_Allowed
            External_Name_Casing
            Fast_Math
            Favor_Top_Level
            Float_Representation
            Implicit_Packing
            Initialize_Scalars
            Interrupt_State
            License
            Locking_Policy
            Long_Float
            No_Run_Time
            No_Strict_Aliasing
            Normalize_Scalars
            Optimize_Alignment
            Persistent_BSS
            Polling
            Priority_Specific_Dispatching
            Profile
            Profile_Warnings
            Propagate_Exceptions
            Queuing_Policy
            Ravenscar
            Restricted_Run_Time
            Restrictions
            Restrictions_Warnings
            Reviewable
            Short_Circuit_And_Or
            Source_File_Name
            Source_File_Name_Project
            Style_Checks
            Suppress
            Suppress_Exception_Locations
            Task_Dispatching_Policy
            Universal_Data
            Unsuppress
            Use_VADS_Size
            Validity_Checks
            Warnings
            Wide_Character_Encoding

Next: The Configuration Pragmas Files, Up: Configuration Pragmas

### 9.1 Handling of Configuration Pragmas

Configuration pragmas may either appear at the start of a compilation unit, or they can appear in a configuration pragma file to apply to all compilations performed in a given compilation environment.

GNAT also provides the `gnatchop` utility to provide an automatic way to handle configuration pragmas following the semantics for compilations (that is, files with multiple units), described in the RM. See Operating gnatchop in Compilation Mode for details. However, for most purposes, it will be more convenient to edit the `gnat.adc` file that contains configuration pragmas directly, as described in the following section.

In the case of `Restrictions` pragmas appearing as configuration pragmas in individual compilation units, the exact handling depends on the type of restriction.

Restrictions that require partition-wide consistency (like `No_Tasking`) are recognized wherever they appear and can be freely inherited, e.g. from a with'ed unit to the with'ing unit. This makes sense since the binder will in any case insist on seeing consistent use, so any unit not conforming to any restrictions that are anywhere in the partition will be rejected, and you might as well find that out at compile time rather than at bind time.

For restrictions that do not require partition-wide consistency, e.g. SPARK or No_Implementation_Attributes, in general the restriction applies only to the unit in which the pragma appears, and not to any other units.

The exception is No_Elaboration_Code which always applies to the entire object file from a compilation, i.e. to the body, spec, and all subunits. This restriction can be specified in a configuration pragma file, or it can be on the body and/or the spec (in eithe case it applies to all the relevant units). It can appear on a subunit only if it has previously appeared in the body of spec.

Previous: Handling of Configuration Pragmas, Up: Configuration Pragmas

### 9.2 The Configuration Pragmas Files

In GNAT a compilation environment is defined by the current directory at the time that a compile command is given. This current directory is searched for a file whose name is `gnat.adc`. If this file is present, it is expected to contain one or more configuration pragmas that will be applied to the current compilation. However, if the switch `-gnatA` is used, `gnat.adc` is not considered.

Configuration pragmas may be entered into the `gnat.adc` file either by running `gnatchop` on a source file that consists only of configuration pragmas, or more conveniently by direct editing of the `gnat.adc` file, which is a standard format source file.

In addition to `gnat.adc`, additional files containing configuration pragmas may be applied to the current compilation using the switch `-gnatec` path. path must designate an existing file that contains only configuration pragmas. These configuration pragmas are in addition to those found in `gnat.adc` (provided `gnat.adc` is present and switch `-gnatA` is not used).

It is allowed to specify several switches `-gnatec`, all of which will be taken into account.

If you are using project file, a separate mechanism is provided using project attributes, see Specifying Configuration Pragmas for more details.

Next: GNAT Project Manager, Previous: Configuration Pragmas, Up: Top

## 10 Handling Arbitrary File Naming Conventions Using `gnatname`

Next: Running gnatname, Up: Handling Arbitrary File Naming Conventions Using gnatname

### 10.1 Arbitrary File Naming Conventions

The GNAT compiler must be able to know the source file name of a compilation unit. When using the standard GNAT default file naming conventions (`.ads` for specs, `.adb` for bodies), the GNAT compiler does not need additional information.

When the source file names do not follow the standard GNAT default file naming conventions, the GNAT compiler must be given additional information through a configuration pragmas file (see Configuration Pragmas) or a project file. When the non-standard file naming conventions are well-defined, a small number of pragmas `Source_File_Name` specifying a naming pattern (see Alternative File Naming Schemes) may be sufficient. However, if the file naming conventions are irregular or arbitrary, a number of pragma `Source_File_Name` for individual compilation units must be defined. To help maintain the correspondence between compilation unit names and source file names within the compiler, GNAT provides a tool `gnatname` to generate the required pragmas for a set of files.

Next: Switches for gnatname, Previous: Arbitrary File Naming Conventions, Up: Handling Arbitrary File Naming Conventions Using gnatname

### 10.2 Running `gnatname`

The usual form of the `gnatname` command is

         $ gnatname [switches] naming_pattern [naming_patterns]
               [--and [switches] naming_pattern [naming_patterns]]

All of the arguments are optional. If invoked without any argument, `gnatname` will display its usage.

When used with at least one naming pattern, `gnatname` will attempt to find all the compilation units in files that follow at least one of the naming patterns. To find these compilation units, `gnatname` will use the GNAT compiler in syntax-check-only mode on all regular files.

One or several Naming Patterns may be given as arguments to `gnatname`. Each Naming Pattern is enclosed between double quotes (or single quotes on Windows). A Naming Pattern is a regular expression similar to the wildcard patterns used in file names by the Unix shells or the DOS prompt.

`gnatname` may be called with several sections of directories/patterns. Sections are separated by switch `--and`. In each section, there must be at least one pattern. If no directory is specified in a section, the current directory (or the project directory is `-P` is used) is implied. The options other that the directory switches and the patterns apply globally even if they are in different sections.

Examples of Naming Patterns are

            "*.[12].ada"
            "*.ad[sb]*"
            "body_*"    "spec_*"

For a more complete description of the syntax of Naming Patterns, see the second kind of regular expressions described in `g-regexp.ads` (the “Glob” regular expressions).

When invoked with no switch `-P`, `gnatname` will create a configuration pragmas file `gnat.adc` in the current working directory, with pragmas `Source_File_Name` for each file that contains a valid Ada unit.

Next: Examples of gnatname Usage, Previous: Running gnatname, Up: Handling Arbitrary File Naming Conventions Using gnatname

### 10.3 Switches for `gnatname`

Switches for `gnatname` must precede any specified Naming Pattern.

You may specify any of the following switches to `gnatname`:

`--version`
  Display Copyright and version, then exit disregarding all other options.
`--help`
  If `--version` was not used, display usage, then exit disregarding all other options.
`--and`
  Start another section of directories/patterns.
`-c`file``
  Create a configuration pragmas file `file` (instead of the default `gnat.adc`). There may be zero, one or more space between `-c` and `file`. `file` may include directory information. `file` must be writable. There may be only one switch `-c`. When a switch `-c` is specified, no switch `-P` may be specified (see below).
`-d`dir``
  Look for source files in directory `dir`. There may be zero, one or more spaces between `-d` and `dir`. When a switch `-d` is specified, the current working directory will not be searched for source files, unless it is explicitly specified with a `-d` or `-D` switch. Several switches `-d` may be specified. If `dir` is a relative path, it is relative to the directory of the configuration pragmas file specified with switch `-c`, or to the directory of the project file specified with switch `-P` or, if neither switch `-c` nor switch `-P` are specified, it is relative to the current working directory. The directory specified with switch `-d` must exist and be readable.
`-D`file``
  Look for source files in all directories listed in text file `file`. There may be zero, one or more spaces between `-D` and `file`. `file` must be an existing, readable text file. Each nonempty line in `file` must be a directory. Specifying switch `-D` is equivalent to specifying as many switches `-d` as there are nonempty lines in `file`.
`-f`pattern``
  Foreign patterns. Using this switch, it is possible to add sources of languages other than Ada to the list of sources of a project file. It is only useful if a -P switch is used. For example,

                gnatname -Pprj -f"*.c" "*.ada"

  will look for Ada units in all files with the `.ada` extension, and will add to the list of file for project `prj.gpr` the C files with extension `.c`.

`-h`
  Output usage (help) information. The output is written to `stdout`.
`-P`proj``
  Create or update project file `proj`. There may be zero, one or more space between `-P` and `proj`. `proj` may include directory information. `proj` must be writable. There may be only one switch `-P`. When a switch `-P` is specified, no switch `-c` may be specified.
`-v`
  Verbose mode. Output detailed explanation of behavior to `stdout`. This includes name of the file written, the name of the directories to search and, for each file in those directories whose name matches at least one of the Naming Patterns, an indication of whether the file contains a unit, and if so the name of the unit.
`-v -v`
  Very Verbose mode. In addition to the output produced in verbose mode, for each file in the searched directories whose name matches none of the Naming Patterns, an indication is given that there is no match.
`-x`pattern``
  Excluded patterns. Using this switch, it is possible to exclude some files that would match the name patterns. For example,

                gnatname -x "*_nt.ada" "*.ada"

  will look for Ada units in all files with the `.ada` extension, except those whose names end with `_nt.ada`.

Previous: Switches for gnatname, Up: Handling Arbitrary File Naming Conventions Using gnatname

### 10.4 Examples of `gnatname` Usage

         $ gnatname -c /home/me/names.adc -d sources "[a-z]*.ada*"

In this example, the directory `/home/me` must already exist and be writable. In addition, the directory `/home/me/sources` (specified by `-d sources`) must exist and be readable.

Note the optional spaces after `-c` and `-d`.

         $ gnatname -P/home/me/proj -x "*_nt_body.ada"
           -dsources -dsources/plus -Dcommon_dirs.txt "body_*" "spec_*"

Note that several switches `-d` may be used, even in conjunction with one or several switches `-D`. Several Naming Patterns and one excluded pattern are used in this example.

Next: Tools Supporting Project Files, Previous: Handling Arbitrary File Naming Conventions Using gnatname, Up: Top

## 11 GNAT Project Manager

Next: Building With Projects, Up: GNAT Project Manager

### 11.1 Introduction

This chapter describes GNAT's Project Manager, a facility that allows you to manage complex builds involving a number of source files, directories, and options for different system configurations. In particular, project files allow you to specify:

- The directory or set of directories containing the source files, and/or the names of the specific source files themselves
- The directory in which the compiler's output (`ALI` files, object files, tree files, etc.) is to be placed
- The directory in which the executable programs are to be placed
- Switch settings for any of the project-enabled tools; you can apply these settings either globally or to individual compilation units.
- The source files containing the main subprogram(s) to be built
- The source programming language(s)
- Source file naming conventions; you can specify these either globally or for individual compilation units (see Naming Schemes).
- Change any of the above settings depending on external values, thus enabling the reuse of the projects in various scenarios (see Scenarios in Projects).
- Automatically build libraries as part of the build process (see Library Projects).

Project files are written in a syntax close to that of Ada, using familiar notions such as packages, context clauses, declarations, default values, assignments, and inheritance (see Project File Reference).

Project files can be built hierarchically from other project files, simplifying complex system integration and project reuse (see Organizing Projects into Subsystems).

- One project can import other projects containing needed source files. More generally, the Project Manager lets you structure large development efforts into hierarchical subsystems, where build decisions are delegated to the subsystem level, and thus different compilation environments (switch settings) used for different subsystems.
- You can organize GNAT projects in a hierarchy: a child project can extend a parent project, inheriting the parent's source files and optionally overriding any of them with alternative versions (see Project Extension).

Several tools support project files, generally in addition to specifying the information on the command line itself). They share common switches to control the loading of the project (in particular `-Pprojectfile` and `-Xvbl=value`). See Switches Related to Project Files.

The Project Manager supports a wide range of development strategies, for systems of all sizes. Here are some typical practices that are easily handled:

- Using a common set of source files and generating object files in different directories via different switch settings. It can be used for instance, for generating separate sets of object files for debugging and for production.
- Using a mostly-shared set of source files with different versions of some units or subunits. It can be used for instance, for grouping and hiding

all OS dependencies in a small number of implementation units.

Project files can be used to achieve some of the effects of a source versioning system (for example, defining separate projects for the different sets of sources that comprise different releases) but the Project Manager is independent of any source configuration management tool that might be used by the developers.

The various sections below introduce the different concepts related to projects. Each section starts with examples and use cases, and then goes into the details of related project file capabilities.

Next: Organizing Projects into Subsystems, Previous: Introduction, Up: GNAT Project Manager

### 11.2 Building With Projects

In its simplest form, a unique project is used to build a single executable. This section concentrates on such a simple setup. Later sections will extend this basic model to more complex setups.

The following concepts are the foundation of project files, and will be further detailed later in this documentation. They are summarized here as a reference.

Project file:
  A text file using an Ada-like syntax, generally using the `.gpr` extension. It defines build-related characteristics of an application. The characteristics include the list of sources, the location of those sources, the location for the generated object files, the name of the main program, and the options for the various tools involved in the build process.
Project attribute:
  A specific project characteristic is defined by an attribute clause. Its value is a string or a sequence of strings. All settings in a project are defined through a list of predefined attributes with precise semantics. See Attributes.
Package in a project:
  Global attributes are defined at the top level of a project. Attributes affecting specific tools are grouped in a package whose name is related to tool's function. The most common packages are `Builder`, `Compiler`, `Binder`, and `Linker`. See Packages.
Project variables:
  In addition to attributes, a project can use variables to store intermediate values and avoid duplication in complex expressions. It can be initialized with a value coming from the environment. A frequent use of variables is to define scenarios. See External Values, See Scenarios in Projects, and See Variables.
Source files and source directories:
  A source file is associated with a language through a naming convention. For instance, `foo.c` is typically the name of a C source file; `bar.ads` or `bar.1.ada` are two common naming conventions for a file containing an Ada spec. A compilation unit is often composed of a main source file and potentially several auxiliary ones, such as header files in C. The naming conventions can be user defined See Naming Schemes, and will drive the builder to call the appropriate compiler for the given source file. Source files are searched for in the source directories associated with the project through the Source_Dirs attribute. By default, all the files (in these source directories) following the naming conventions associated with the declared languages are considered to be part of the project. It is also possible to limit the list of source files using the Source_Files or Source_List_File attributes. Note that those last two attributes only accept basenames with no directory information.
Object files and object directory:
  An object file is an intermediate file produced by the compiler from a compilation unit. It is used by post-compilation tools to produce final executables or libraries. Object files produced in the context of a given project are stored in a single directory that can be specified by the Object_Dir attribute. In order to store objects in two or more object directories, the system must be split into distinct subsystems with their own project file.

The following subsections introduce gradually all the attributes of interest for simple build needs. Here is the simple setup that will be used in the following examples.

The Ada source files `pack.ads`, `pack.adb`, and `proc.adb` are in the `common/` directory. The file `proc.adb` contains an Ada main subprogram `Proc` that `with`s package `Pack`. We want to compile these source files with the switch `-O2`, and put the resulting files in the directory `obj/`.

         common/
           pack.ads
           pack.adb
           proc.adb
         common/release/
           proc.ali, proc.o pack.ali, pack.o

Our project is to be called Build. The name of the file is the name of the project (case-insensitive) with the `.gpr` extension, therefore the project file name is `build.gpr`. This is not mandatory, but a warning is issued when this convention is not followed.

This is a very simple example, and as stated above, a single project file is enough for it. We will thus create a new file, that for now should contain the following code:

         project Build is
         end Build;

Next: Object and Exec Directory, Up: Building With Projects

#### 11.2.1 Source Files and Directories

When you create a new project, the first thing to describe is how to find the corresponding source files. This is the only settings that are needed by all the tools that will use this project (builder, compiler, binder and linker for the compilation, IDEs to edit the source files,...).

First step is to declare the source directories, which are the directories to be searched to find source files. In the case of the example, the `common` directory is the only source directory.

There are several ways of defining source directories:

- When the attribute Source_Dirs is not used, a project contains a single source directory which is the one where the project file itself resides. In our example, if `build.gpr` is placed in the `common` directory, the project has the needed implicit source directory.
- The attribute Source_Dirs can be set to a list of path names, one for each of the source directories. Such paths can either be absolute names (for instance `"/usr/local/common/"` on UNIX), or relative to the directory in which the project file resides (for instance "." if `build.gpr` is inside `common/`, or "common" if it is one level up). Each of the source directories must exist and be readable.

  The syntax for directories is platform specific. For portability, however, the project manager will always properly translate UNIX-like path names to the native format of specific platform. For instance, when the same project file is to be used both on Unix and Windows, "/" should be used as the directory separator rather than "\".

- The attribute Source_Dirs can automatically include subdirectories using a special syntax inspired by some UNIX shells. If any of the path in the list ends with "**", then that path and all its subdirectories (recursively) are included in the list of source directories. For instance, `**` and `./**` represent the complete directory tree rooted at ".". When using that construct, it can sometimes be convenient to also use the attribute Excluded_Source_Dirs, which is also a list of paths. Each entry specifies a directory whose immediate content, not including subdirs, is to be excluded. It is also possible to exclude a complete directory subtree using the "**" notation.

  It is often desirable to remove, from the source directories, directory subtrees rooted at some subdirectories. An example is the subdirectories created by a Version Control System such as Subversion that creates directory subtrees rooted at subdirectories ".svn". To do that, attribute Ignore_Source_Sub_Dirs can be used. It specifies the list of simple file names for the roots of these undesirable directory subtrees.

                    for Source_Dirs use ("./**");
                    for Ignore_Source_Sub_Dirs use (".svn");

When applied to the simple example, and because we generally prefer to have the project file at the toplevel directory rather than mixed with the sources, we will create the following file

            build.gpr
            project Build is
               for Source_Dirs use ("common");  --  <<<<
            end Build;

Once source directories have been specified, one may need to indicate source files of interest. By default, all source files present in the source directories are considered by the project manager. When this is not desired, it is possible to specify the list of sources to consider explicitly. In such a case, only source file base names are indicated and not their absolute or relative path names. The project manager is in charge of locating the specified source files in the specified source directories.

- By default, the project manager search for all source files of all specified languages in all the source directories.

  Since the project manager was initially developed for Ada environments, the default language is usually Ada and the above project file is complete: it defines without ambiguity the sources composing the project: that is to say, all the sources in subdirectory "common" for the default language (Ada) using the default naming convention.

  However, when compiling a multi-language application, or a pure C application, the project manager must be told which languages are of interest, which is done by setting the Languages attribute to a list of strings, each of which is the name of a language. Tools like `gnatmake` only know about Ada, while other tools like `gprbuild` know about many more languages such as C, C++, Fortran, assembly and others can be added dynamically.

  Even when using only Ada, the default naming might not be suitable. Indeed, how does the project manager recognizes an "Ada file" from any other file? Project files can describe the naming scheme used for source files, and override the default (see Naming Schemes). The default is the standard GNAT extension (`.adb` for bodies and `.ads` for specs), which is what is used in our example, explaining why no naming scheme is explicitly specified. See Naming Schemes.

- `Source_Files` In some cases, source directories might contain files that should not be included in a project. One can specify the explicit list of file names to be considered through the Source_Files attribute. When this attribute is defined, instead of looking at every file in the source directories, the project manager takes only those names into consideration reports errors if they cannot be found in the source directories or does not correspond to the naming scheme.
- For various reasons, it is sometimes useful to have a project with no sources (most of the time because the attributes defined in the project file will be reused in other projects, as explained in see Organizing Projects into Subsystems. To do this, the attribute Source_Files is set to the empty list, i.e. `()`. Alternatively, Source_Dirs can be set to the empty list, with the same result.
- `Source_List_File` If there is a great number of files, it might be more convenient to use the attribute Source_List_File, which specifies the full path of a file. This file must contain a list of source file names (one per line, no directory information) that are searched as if they had been defined through Source_Files. Such a file can easily be created through external tools.

  A warning is issued if both attributes `Source_Files` and `Source_List_File` are given explicit values. In this case, the attribute `Source_Files` prevails.

- `Excluded_Source_Files` Specifying an explicit list of files is not always convenient.It might be more convenient to use the default search rules with specific exceptions. This can be done thanks to the attribute Excluded_Source_Files (or its synonym Locally_Removed_Files). Its value is the list of file names that should not be taken into account. This attribute is often used when extending a project, See Project Extension. A similar attribute Excluded_Source_List_File plays the same role but takes the name of file containing file names similarly to `Source_List_File`.

In most simple cases, such as the above example, the default source file search behavior provides the expected result, and we do not need to add anything after setting `Source_Dirs`. The project manager automatically finds `pack.ads`, `pack.adb` and `proc.adb` as source files of the project.

Note that it is considered an error for a project file to have no sources attached to it unless explicitly declared as mentioned above.

If the order of the source directories is known statically, that is if `"**"` is not used in the string list `Source_Dirs`, then there may be several files with the same source file name sitting in different directories of the project. In this case, only the file in the first directory is considered as a source of the project and the others are hidden. If `"**"` is used in the string list `Source_Dirs`, it is an error to have several files with the same source file name in the same directory `"**"` subtree, since there would be an ambiguity as to which one should be used. However, two files with the same source file name may exist in two single directories or directory subtrees. In this case, the one in the first directory or directory subtree is a source of the project.

Next: Main Subprograms, Previous: Source Files and Directories, Up: Building With Projects

#### 11.2.2 Object and Exec Directory

The next step when writing a project is to indicate where the compiler should put the object files. In fact, the compiler and other tools might create several different kind of files (for GNAT, there is the object file and the ALI file for instance). One of the important concepts in projects is that most tools may consider source directories as read-only and do not attempt to create new or temporary files there. Instead, all files are created in the object directory. It is of course not true for project-aware IDEs, whose purpose it is to create the source files.

The object directory is specified through the Object_Dir attribute. Its value is the path to the object directory, either absolute or relative to the directory containing the project file. This directory must already exist and be readable and writable, although some tools have a switch to create the directory if needed (See the switch `-p` for `gnatmake` and `gprbuild`).

If the attribute `Object_Dir` is not specified, it defaults to the project directory, that is the directory containing the project file.

For our example, we can specify the object dir in this way:

            project Build is
               for Source_Dirs use ("common");
               for Object_Dir use "obj";   --  <<<<
            end Build;

As mentioned earlier, there is a single object directory per project. As a result, if you have an existing system where the object files are spread in several directories, you can either move all of them into the same directory if you want to build it with a single project file, or study the section on subsystems (see Organizing Projects into Subsystems) to see how each separate object directory can be associated with one of the subsystem constituting the application.

When the `linker` is called, it usually creates an executable. By default, this executable is placed in the object directory of the project. It might be convenient to store it in its own directory.

This can be done through the `Exec_Dir` attribute, which, like Object_Dir contains a single absolute or relative path and must point to an existing and writable directory, unless you ask the tool to create it on your behalf. When not specified, It defaults to the object directory and therefore to the project file's directory if neither Object_Dir nor Exec_Dir was specified.

In the case of the example, let's place the executable in the root of the hierarchy, ie the same directory as `build.gpr`. Hence the project file is now

            project Build is
               for Source_Dirs use ("common");
               for Object_Dir use "obj";
               for Exec_Dir use ".";  --   <<<<
            end Build;

Next: Tools Options in Project Files, Previous: Object and Exec Directory, Up: Building With Projects

#### 11.2.3 Main Subprograms

In the previous section, executables were mentioned. The project manager needs to be taught what they are. In a project file, an executable is indicated by pointing to source file of the main subprogram. In C this is the file that contains the `main` function, and in Ada the file that contains the main unit.

There can be any number of such main files within a given project, and thus several executables can be built in the context of a single project file. Of course, one given executable might not (and in fact will not) need all the source files referenced by the project. As opposed to other build environments such as `makefile`, one does not need to specify the list of dependencies of each executable, the project-aware builders knows enough of the semantics of the languages to build ands link only the necessary elements.

The list of main files is specified via the Main attribute. It contains a list of file names (no directories). If a project defines this attribute, it is not necessary to identify main files on the command line when invoking a builder, and editors like `GPS` will be able to create extra menus to spawn or debug the corresponding executables.

            project Build is
               for Source_Dirs use ("common");
               for Object_Dir use "obj";
               for Exec_Dir use ".";
               for Main use ("proc.adb");  --   <<<<
            end Build;

If this attribute is defined in the project, then spawning the builder with a command such as

            gnatmake -Pbuild

automatically builds all the executables corresponding to the files listed in the Main attribute. It is possible to specify one or more executables on the command line to build a subset of them.

Next: Compiling with Project Files, Previous: Main Subprograms, Up: Building With Projects

#### 11.2.4 Tools Options in Project Files

We now have a project file that fully describes our environment, and can be used to build the application with a simple `gnatmake` command as seen in the previous section. In fact, the empty project we showed immediately at the beginning (with no attribute at all) could already fulfill that need if it was put in the `common` directory.

Of course, we always want more control. This section will show you how to specify the compilation switches that the various tools involved in the building of the executable should use.

Since source names and locations are described into the project file, it is not necessary to use switches on the command line for this purpose (switches such as -I for gcc). This removes a major source of command line length overflow. Clearly, the builders will have to communicate this information one way or another to the underlying compilers and tools they call but they usually use response files for this and thus should not be subject to command line overflows.

Several tools are participating to the creation of an executable: the compiler produces object files from the source files; the binder (in the Ada case) creates an source file that takes care, among other things, of elaboration issues and global variables initialization; and the linker gathers everything into a single executable that users can execute. All these tools are known by the project manager and will be called with user defined switches from the project files. However, we need to introduce a new project file concept to express which switches to be used for any of the tools involved in the build.

A project file is subdivided into zero or more packages, each of which contains the attributes specific to one tool (or one set of tools). Project files use an Ada-like syntax for packages. Package names permitted in project files are restricted to a predefined set (see Packages), and the contents of packages are limited to a small set of constructs and attributes (see Attributes).

Our example project file can be extended with the following empty packages. At this stage, they could all be omitted since they are empty, but they show which packages would be involved in the build process.

            project Build is
               for Source_Dirs use ("common");
               for Object_Dir use "obj";
               for Exec_Dir use ".";
               for Main use ("proc.adb");

               package Builder is  --<<<  for gnatmake and gprbuild
               end Builder;

               package Compiler is --<<<  for the compiler
               end Compiler;

               package Binder is   --<<<  for the binder
               end Binder;

               package Linker is   --<<<  for the linker
               end Linker;
            end Build;

Let's first examine the compiler switches. As stated in the initial description of the example, we want to compile all files with `-O2`. This is a compiler switch, although it is usual, on the command line, to pass it to the builder which then passes it to the compiler. It is recommended to use directly the right package, which will make the setup easier to understand for other people.

Several attributes can be used to specify the switches:

Default_Switches:
  This is the first mention in this manual of an indexed attribute. When this attribute is defined, one must supply an index in the form of a literal string. In the case of Default_Switches, the index is the name of the language to which the switches apply (since a different compiler will likely be used for each language, and each compiler has its own set of switches). The value of the attribute is a list of switches.

  In this example, we want to compile all Ada source files with the `-O2` switch, and the resulting project file is as follows (only the `Compiler` package is shown):

                  package Compiler is
                    for Default_Switches ("Ada") use ("-O2");
                  end Compiler;

Switches:
  in some cases, we might want to use specific switches for one or more files. For instance, compiling `proc.adb` might not be possible at high level of optimization because of a compiler issue. In such a case, the Switches attribute (indexed on the file name) can be used and will override the switches defined by Default_Switches. Our project file would become:

                  package Compiler is
                    for Default_Switches ("Ada") use ("-O2");
                    for Switches ("proc.adb") use ("-O0");
                  end Compiler;

  `Switches` may take a pattern as an index, such as in:

                  package Compiler is
                    for Default_Switches ("Ada") use ("-O2");
                    for Switches ("pkg*") use ("-O0");
                  end Compiler;

  Sources `pkg.adb` and `pkg-child.adb` would be compiled with -O0, not -O2.

  `Switches` can also be given a language name as index instead of a file name in which case it has the same semantics as Default_Switches. However, indexes with wild cards are never valid for language name.

Local_Configuration_Pragmas:
  this attribute may specify the path of a file containing configuration pragmas for use by the Ada compiler, such as `pragma Restrictions (No_Tasking)`. These pragmas will be used for all the sources of the project.

The switches for the other tools are defined in a similar manner through the Default_Switches and Switches attributes, respectively in the Builder package (for `gnatmake` and `gprbuild`), the Binder package (binding Ada executables) and the Linker package (for linking executables).

Next: Executable File Names, Previous: Tools Options in Project Files, Up: Building With Projects

#### 11.2.5 Compiling with Project Files

Now that our project files are written, let's build our executable. Here is the command we would use from the command line:

            gnatmake -Pbuild

This will automatically build the executables specified through the Main attribute: for each, it will compile or recompile the sources for which the object file does not exist or is not up-to-date; it will then run the binder; and finally run the linker to create the executable itself.

`gnatmake` only knows how to handle Ada files. By using `gprbuild` as a builder, you could automatically manage C files the same way: create the file `utils.c` in the `common` directory, set the attribute Languages to `"(Ada, C)"`, and run

            gprbuild -Pbuild

Gprbuild knows how to recompile the C files and will recompile them only if one of their dependencies has changed. No direct indication on how to build the various elements is given in the project file, which describes the project properties rather than a set of actions to be executed. Here is the invocation of `gprbuild` when building a multi-language program:

         $ gprbuild -Pbuild
         gcc -c proc.adb
         gcc -c pack.adb
         gcc -c utils.c
         gprbind proc
         ...
         gcc proc.o -o proc

Notice the three steps described earlier:

- The first three gcc commands correspond to the compilation phase.
- The gprbind command corresponds to the post-compilation phase.
- The last gcc command corresponds to the final link.

The default output of GPRbuild's execution is kept reasonably simple and easy to understand. In particular, some of the less frequently used commands are not shown, and some parameters are abbreviated. So it is not possible to rerun the effect of the `gprbuild` command by cut-and-pasting its output. GPRbuild's option `-v` provides a much more verbose output which includes, among other information, more complete compilation, post-compilation and link commands.

Next: Avoid Duplication With Variables, Previous: Compiling with Project Files, Up: Building With Projects

#### 11.2.6 Executable File Names

By default, the executable name corresponding to a main file is computed from the main source file name. Through the attribute Builder.Executable, it is possible to change this default.

For instance, instead of building `proc` (or `proc.exe` on Windows), we could configure our project file to build "proc1" (resp proc1.exe) with the following addition:

            project Build is
               ...  --  same as before
               package Builder is
                  for Executable ("proc.adb") use "proc1";
               end Builder
            end Build;

Attribute Executable_Suffix, when specified, may change the suffix of the executable files, when no attribute `Executable` applies: its value replace the platform-specific executable suffix. The default executable suffix is empty on UNIX and ".exe" on Windows.

It is also possible to change the name of the produced executable by using the command line switch `-o`. When several mains are defined in the project, it is not possible to use the `-o` switch and the only way to change the names of the executable is provided by Attributes `Executable` and `Executable_Suffix`.

Next: Naming Schemes, Previous: Executable File Names, Up: Building With Projects

#### 11.2.7 Avoid Duplication With Variables

To illustrate some other project capabilities, here is a slightly more complex project using similar sources and a main program in C:

         project C_Main is
            for Languages    use ("Ada", "C");
            for Source_Dirs  use ("common");
            for Object_Dir   use  "obj";
            for Main         use ("main.c");
            package Compiler is
               C_Switches := ("-pedantic");
               for Default_Switches ("C")   use C_Switches;
               for Default_Switches ("Ada") use ("-gnaty");
               for Switches ("main.c") use C_Switches & ("-g");
            end Compiler;
         end C_Main;

This project has many similarities with the previous one. As expected, its `Main` attribute now refers to a C source. The attribute Exec_Dir is now omitted, thus the resulting executable will be put in the directory `obj`.

The most noticeable difference is the use of a variable in the Compiler package to store settings used in several attributes. This avoids text duplication, and eases maintenance (a single place to modify if we want to add new switches for C files). We will revisit the use of variables in the context of scenarios (see Scenarios in Projects).

In this example, we see how the file `main.c` can be compiled with the switches used for all the other C files, plus `-g`. In this specific situation the use of a variable could have been replaced by a reference to the `Default_Switches` attribute:

            for Switches ("c_main.c") use Compiler'Default_Switches ("C") & ("-g");

Note the tick (') used to refer to attributes defined in a package.

Here is the output of the GPRbuild command using this project:

         $gprbuild -Pc_main
         gcc -c -pedantic -g main.c
         gcc -c -gnaty proc.adb
         gcc -c -gnaty pack.adb
         gcc -c -pedantic utils.c
         gprbind main.bexch
         ...
         gcc main.o -o main

The default switches for Ada sources, the default switches for C sources (in the compilation of `lib.c`), and the specific switches for `main.c` have all been taken into account.

Next: Installation, Previous: Avoid Duplication With Variables, Up: Building With Projects

#### 11.2.8 Naming Schemes

Sometimes an Ada software system is ported from one compilation environment to another (say GNAT), and the file are not named using the default GNAT conventions. Instead of changing all the file names, which for a variety of reasons might not be possible, you can define the relevant file naming scheme in the Naming package of your project file.

The naming scheme has two distinct goals for the project manager: it allows finding of source files when searching in the source directories, and given a source file name it makes it possible to guess the associated language, and thus the compiler to use.

Note that the use by the Ada compiler of pragmas Source_File_Name is not supported when using project files. You must use the features described in this paragraph. You can however specify other configuration pragmas (see Specifying Configuration Pragmas).

The following attributes can be defined in package `Naming`:

Casing:
  Its value must be one of `"lowercase"` (the default if unspecified), `"uppercase"` or `"mixedcase"`. It describes the casing of file names with regards to the Ada unit name. Given an Ada unit My_Unit, the file name will respectively be `my_unit.adb` (lowercase), `MY_UNIT.ADB` (uppercase) or `My_Unit.adb` (mixedcase). On Windows, file names are case insensitive, so this attribute is irrelevant.
Dot_Replacement:
  This attribute specifies the string that should replace the "." in unit names. Its default value is `"-"` so that a unit `Parent.Child` is expected to be found in the file `parent-child.adb`. The replacement string must satisfy the following requirements to avoid ambiguities in the naming scheme:
  - It must not be empty
  - It cannot start or end with an alphanumeric character
  - It cannot be a single underscore
  - It cannot start with an underscore followed by an alphanumeric
  - It cannot contain a dot `'.'` except if the entire string is `"."`
Spec_Suffix and Specification_Suffix:
  For Ada, these attributes give the suffix used in file names that contain specifications. For other languages, they give the extension for files that contain declaration (header files in C for instance). The attribute is indexed on the language. The two attributes are equivalent, but the latter is obsolescent. If `Spec_Suffix ("Ada")` is not specified, then the default is `".ads"`. The value must satisfy the following requirements:
  - It must not be empty
  - It cannot start with an alphanumeric character
  - It cannot start with an underscore followed by an alphanumeric character
  - It must include at least one dot
Body_Suffix and Implementation_Suffix:
  These attributes give the extension used for file names that contain code (bodies in Ada). They are indexed on the language. The second version is obsolescent and fully replaced by the first attribute.

  These attributes must satisfy the same requirements as `Spec_Suffix`. In addition, they must be different from any of the values in `Spec_Suffix`. If `Body_Suffix ("Ada")` is not specified, then the default is `".adb"`.

  If `Body_Suffix ("Ada")` and `Spec_Suffix ("Ada")` end with the same string, then a file name that ends with the longest of these two suffixes will be a body if the longest suffix is `Body_Suffix ("Ada")` or a spec if the longest suffix is `Spec_Suffix ("Ada")`.

  If the suffix does not start with a '.', a file with a name exactly equal to the suffix will also be part of the project (for instance if you define the suffix as `Makefile`, a file called `Makefile` will be part of the project. This capability is usually not interesting when building. However, it might become useful when a project is also used to find the list of source files in an editor, like the GNAT Programming System (GPS).

Separate_Suffix:
  This attribute is specific to Ada. It denotes the suffix used in file names that contain separate bodies. If it is not specified, then it defaults to same value as `Body_Suffix ("Ada")`. The same rules apply as for the `Body_Suffix` attribute. The only accepted index is "Ada".
Spec or Specification:
  This attribute `Spec` can be used to define the source file name for a given Ada compilation unit's spec. The index is the literal name of the Ada unit (case insensitive). The value is the literal base name of the file that contains this unit's spec (case sensitive or insensitive depending on the operating system). This attribute allows the definition of exceptions to the general naming scheme, in case some files do not follow the usual convention.

  When a source file contains several units, the relative position of the unit can be indicated. The first unit in the file is at position 1

                   for Spec ("MyPack.MyChild") use "mypack.mychild.spec";
                   for Spec ("top") use "foo.a" at 1;
                   for Spec ("foo") use "foo.a" at 2;

Body or Implementation:
  These attribute play the same role as Spec for Ada bodies.
Specification_Exceptions and Implementation_Exceptions:
  These attributes define exceptions to the naming scheme for languages other than Ada. They are indexed on the language name, and contain a list of file names respectively for headers and source code.

For example, the following package models the Apex file naming rules:

           package Naming is
             for Casing               use "lowercase";
             for Dot_Replacement      use ".";
             for Spec_Suffix ("Ada")  use ".1.ada";
             for Body_Suffix ("Ada")  use ".2.ada";
           end Naming;

Next: Distributed support, Previous: Naming Schemes, Up: Building With Projects

#### 11.2.9 Installation

After building an application or a library it is often required to install it into the development environment. For instance this step is required if the library is to be used by another application. The `gprinstall` tool provides an easy way to install libraries, executable or object code generated during the build. The Install package can be used to change the default locations.

The following attributes can be defined in package `Install`:

Active
  Whether the project is to be installed, values are `true` (default) or `false`.
Prefix:
  Root directory for the installation.
Exec_Subdir
  Subdirectory of Prefix where executables are to be installed. Default is bin.
Lib_Subdir
  Subdirectory of Prefix where directory with the library or object files is to be installed. Default is lib.
Sources_Subdir
  Subdirectory of Prefix where directory with sources is to be installed. Default is include.
Project_Subdir
  Subdirectory of Prefix where the generated project file is to be installed. Default is share/gpr.

Previous: Installation, Up: Building With Projects

#### 11.2.10 Distributed support

For large projects the compilation time can become a limitation in the development cycle. To cope with that, GPRbuild supports distributed compilation.

The following attributes can be defined in package `Remote`:

Build_Slaves
  A list of string referencing the remote build slaves to use for the compilation phase. The format is: `[protocol://]name.domain[:port]`.

  Where `protocol` is one of:

  rsync
    The sources are copied using the external `rsync` tool.
  file
    The sources are accessed via a shared directory or mount point.

  The default port used to communicate with `gprslave` is `8484`.

Root_Dir:
  Root directory of the project's sources. The default value is the project's directory.

Next: Scenarios in Projects, Previous: Building With Projects, Up: GNAT Project Manager

### 11.3 Organizing Projects into Subsystems

A subsystem is a coherent part of the complete system to be built. It is represented by a set of sources and one single object directory. A system can be composed of a single subsystem when it is simple as we have seen in the first section. Complex systems are usually composed of several interdependent subsystems. A subsystem is dependent on another subsystem if knowledge of the other one is required to build it, and in particular if visibility on some of the sources of this other subsystem is required. Each subsystem is usually represented by its own project file.

In this section, the previous example is being extended. Let's assume some sources of our `Build` project depend on other sources. For instance, when building a graphical interface, it is usual to depend upon a graphical library toolkit such as GtkAda. Furthermore, we also need sources from a logging module we had previously written.

Next: Cyclic Project Dependencies, Up: Organizing Projects into Subsystems

#### 11.3.1 Project Dependencies

GtkAda comes with its own project file (appropriately called `gtkada.gpr`), and we will assume we have already built a project called `logging.gpr` for the logging module. With the information provided so far in `build.gpr`, building the application would fail with an error indicating that the gtkada and logging units that are relied upon by the sources of this project cannot be found.

This is easily solved by adding the following with clauses at the beginning of our project:

           with "gtkada.gpr";
           with "a/b/logging.gpr";
           project Build is
              ...  --  as before
           end Build;

When such a project is compiled, `gnatmake` will automatically check the other projects and recompile their sources when needed. It will also recompile the sources from `Build` when needed, and finally create the executable. In some cases, the implementation units needed to recompile a project are not available, or come from some third-party and you do not want to recompile it yourself. In this case, the attribute Externally_Built to "true" can be set, indicating to the builder that this project can be assumed to be up-to-date, and should not be considered for recompilation. In Ada, if the sources of this externally built project were compiled with another version of the compiler or with incompatible options, the binder will issue an error.

The project's `with` clause has several effects. It provides source visibility between projects during the compilation process. It also guarantees that the necessary object files from `Logging` and `GtkAda` are available when linking `Build`.

As can be seen in this example, the syntax for importing projects is similar to the syntax for importing compilation units in Ada. However, project files use literal strings instead of names, and the `with` clause identifies project files rather than packages.

Each literal string after `with` is the path (absolute or relative) to a project file. The `.gpr` extension is optional, although we recommend adding it. If no extension is specified, and no project file with the `.gpr` extension is found, then the file is searched for exactly as written in the `with` clause, that is with no extension.

As mentioned above, the path after a `with` has to be a literal string, and you cannot use concatenation, or lookup the value of external variables to change the directories from which a project is loaded. A solution if you need something like this is to use aggregate projects (see Aggregate Projects).

When a relative path or a base name is used, the project files are searched relative to each of the directories in the project path. This path includes all the directories found with the following algorithm, in that order, as soon as a matching file is found, the search stops:

- First, the file is searched relative to the directory that contains the current project file.
- Then it is searched relative to all the directories specified in the environment variables GPR_PROJECT_PATH and ADA_PROJECT_PATH (in that order) if they exist. The former is recommended, the latter is kept for backward compatibility.
- Finally, it is searched relative to the default project directories. Such directories depends on the tool used. The different locations searched in the specified order are:
  - `<prefix>/<target>/lib/gnat` (for `gnatmake` in all cases, and for `gprbuild` if option `--target` is specified)
  - `<prefix>/share/gpr/` (for `gnatmake` and `gprbuild`)
  - `<prefix>/lib/gnat/` (for `gnatmake` and `gprbuild`)

  In our example, `gtkada.gpr` is found in the predefined directory if it was installed at the same root as GNAT.

Some tools also support extending the project path from the command line, generally through the `-aP`. You can see the value of the project path by using the `gnatls -v` command.

Any symbolic link will be fully resolved in the directory of the importing project file before the imported project file is examined.

Any source file in the imported project can be used by the sources of the importing project, transitively. Thus if `A` imports `B`, which imports `C`, the sources of `A` may depend on the sources of `C`, even if `A` does not import `C` explicitly. However, this is not recommended, because if and when `B` ceases to import `C`, some sources in `A` will no longer compile. `gprbuild` has a switch `--no-indirect-imports` that will report such indirect dependencies.

One very important aspect of a project hierarchy is that a given source can only belong to one project (otherwise the project manager would not know which settings apply to it and when to recompile it). It means that different project files do not usually share source directories or when they do, they need to specify precisely which project owns which sources using attribute `Source_Files` or equivalent. By contrast, 2 projects can each own a source with the same base file name as long as they live in different directories. The latter is not true for Ada Sources because of the correlation between source files and Ada units.

Next: Sharing Between Projects, Previous: Project Dependencies, Up: Organizing Projects into Subsystems

#### 11.3.2 Cyclic Project Dependencies

Cyclic dependencies are mostly forbidden: if `A` imports `B` (directly or indirectly) then `B` is not allowed to import `A`. However, there are cases when cyclic dependencies would be beneficial. For these cases, another form of import between projects exists: the limited with. A project `A` that imports a project `B` with a straight `with` may also be imported, directly or indirectly, by `B` through a `limited with`.

The difference between straight `with` and `limited with` is that the name of a project imported with a `limited with` cannot be used in the project importing it. In particular, its packages cannot be renamed and its variables cannot be referred to.

         with "b.gpr";
         with "c.gpr";
         project A is
             For Exec_Dir use B'Exec_Dir; -- ok
         end A;

         limited with "a.gpr";   --  Cyclic dependency: A -> B -> A
         project B is
            For Exec_Dir use A'Exec_Dir; -- not ok
         end B;

         with "d.gpr";
         project C is
         end C;

         limited with "a.gpr";  --  Cyclic dependency: A -> C -> D -> A
         project D is
            For Exec_Dir use A'Exec_Dir; -- not ok
         end D;

Next: Global Attributes, Previous: Cyclic Project Dependencies, Up: Organizing Projects into Subsystems

#### 11.3.3 Sharing Between Projects

When building an application, it is common to have similar needs in several of the projects corresponding to the subsystems under construction. For instance, they will all have the same compilation switches.

As seen before (see Tools Options in Project Files), setting compilation switches for all sources of a subsystem is simple: it is just a matter of adding a `Compiler.Default_Switches` attribute to each project files with the same value. Of course, that means duplication of data, and both places need to be changed in order to recompile the whole application with different switches. It can become a real problem if there are many subsystems and thus many project files to edit.

There are two main approaches to avoiding this duplication:

- Since `build.gpr` imports `logging.gpr`, we could change it to reference the attribute in Logging, either through a package renaming, or by referencing the attribute. The following example shows both cases:

                  project Logging is
                     package Compiler is
                        for Switches ("Ada") use ("-O2");
                     end Compiler;
                     package Binder is
                        for Switches ("Ada") use ("-E");
                     end Binder;
                  end Logging;

                  with "logging.gpr";
                  project Build is
                     package Compiler renames Logging.Compiler;
                     package Binder is
                        for Switches ("Ada") use Logging.Binder'Switches ("Ada");
                     end Binder;
                  end Build;

  The solution used for `Compiler` gets the same value for all attributes of the package, but you cannot modify anything from the package (adding extra switches or some exceptions). The second version is more flexible, but more verbose.

  If you need to refer to the value of a variable in an imported project, rather than an attribute, the syntax is similar but uses a "." rather than an apostrophe. For instance:

                  with "imported";
                  project Main is
                     Var1 := Imported.Var;
                  end Main;

- The second approach is to define the switches in a third project. That project is setup without any sources (so that, as opposed to the first example, none of the project plays a special role), and will only be used to define the attributes. Such a project is typically called `shared.gpr`.

                  abstract project Shared is
                     for Source_Files use ();   --  no project
                     package Compiler is
                        for Switches ("Ada") use ("-O2");
                     end Compiler;
                  end Shared;

                  with "shared.gpr";
                  project Logging is
                     package Compiler renames Shared.Compiler;
                  end Logging;

                  with "shared.gpr";
                  project Build is
                     package Compiler renames Shared.Compiler;
                  end Build;

  As for the first example, we could have chosen to set the attributes one by one rather than to rename a package. The reason we explicitly indicate that `Shared` has no sources is so that it can be created in any directory and we are sure it shares no sources with `Build` or `Logging`, which of course would be invalid.

  Note the additional use of the abstract qualifier in `shared.gpr`. This qualifier is optional, but helps convey the message that we do not intend this project to have sources (see Qualified Projects for more qualifiers).

Previous: Sharing Between Projects, Up: Organizing Projects into Subsystems

#### 11.3.4 Global Attributes

We have already seen many examples of attributes used to specify a special option of one of the tools involved in the build process. Most of those attributes are project specific. That it to say, they only affect the invocation of tools on the sources of the project where they are defined.

There are a few additional attributes that apply to all projects in a hierarchy as long as they are defined on the "main" project. The main project is the project explicitly mentioned on the command-line. The project hierarchy is the "with"-closure of the main project.

Here is a list of commonly used global attributes:

Builder.Global_Configuration_Pragmas:
  This attribute points to a file that contains configuration pragmas to use when building executables. These pragmas apply for all executables built from this project hierarchy. As we have seen before, additional pragmas can be specified on a per-project basis by setting the `Compiler.Local_Configuration_Pragmas` attribute.
Builder.Global_Compilation_Switches:
  This attribute is a list of compiler switches to use when compiling any source file in the project hierarchy. These switches are used in addition to the ones defined in the `Compiler` package, which only apply to the sources of the corresponding project. This attribute is indexed on the name of the language.

Using such global capabilities is convenient. It can also lead to unexpected behavior. Especially when several subsystems are shared among different main projects and the different global attributes are not compatible. Note that using aggregate projects can be a safer and more powerful replacement to global attributes.

Next: Library Projects, Previous: Organizing Projects into Subsystems, Up: GNAT Project Manager

### 11.4 Scenarios in Projects

Various aspects of the projects can be modified based on scenarios. These are user-defined modes that change the behavior of a project. Typical examples are the setup of platform-specific compiler options, or the use of a debug and a release mode (the former would activate the generation of debug information, when the second will focus on improving code optimization).

Let's enhance our example to support a debug and a release modes.The issue is to let the user choose what kind of system he is building: use `-g` as compiler switches in debug mode and `-O2` in release mode. We will also setup the projects so that we do not share the same object directory in both modes, otherwise switching from one to the other might trigger more recompilations than needed or mix objects from the 2 modes.

One naive approach is to create two different project files, say `build_debug.gpr` and `build_release.gpr`, that set the appropriate attributes as explained in previous sections. This solution does not scale well, because in presence of multiple projects depending on each other, you will also have to duplicate the complete hierarchy and adapt the project files to point to the right copies.

Instead, project files support the notion of scenarios controlled by external values. Such values can come from several sources (in decreasing order of priority):

Command line:
  When launching `gnatmake` or `gprbuild`, the user can pass extra `-X` switches to define the external value. In our case, the command line might look like

                       gnatmake -Pbuild.gpr -Xmode=debug
                   or  gnatmake -Pbuild.gpr -Xmode=release

Environment variables:
  When the external value does not come from the command line, it can come from the value of environment variables of the appropriate name. In our case, if an environment variable called "mode" exist, its value will be taken into account.
External function second parameter

We now need to get that value in the project. The general form is to use the predefined function external which returns the current value of the external. For instance, we could setup the object directory to point to either `obj/debug` or `obj/release` by changing our project to

            project Build is
                for Object_Dir use "obj/" & external ("mode", "debug");
                ... --  as before
            end Build;

The second parameter to `external` is optional, and is the default value to use if "mode" is not set from the command line or the environment.

In order to set the switches according to the different scenarios, other constructs have to be introduced such as typed variables and case statements.

A typed variable is a variable that can take only a limited number of values, similar to an enumeration in Ada. Such a variable can then be used in a case statement and create conditional sections in the project. The following example shows how this can be done:

            project Build is
               type Mode_Type is ("debug", "release");  --  all possible values
               Mode : Mode_Type := external ("mode", "debug"); -- a typed variable

               package Compiler is
                  case Mode is
                     when "debug" =>
                        for Switches ("Ada") use ("-g");
                     when "release" =>
                        for Switches ("Ada") use ("-O2");
                  end case;
               end Compiler;
            end Build;

The project has suddenly grown in size, but has become much more flexible. `Mode_Type` defines the only valid values for the `mode` variable. If any other value is read from the environment, an error is reported and the project is considered as invalid.

The `Mode` variable is initialized with an external value defaulting to `"debug"`. This default could be omitted and that would force the user to define the value. Finally, we can use a case statement to set the switches depending on the scenario the user has chosen.

Most aspects of the projects can depend on scenarios. The notable exception are project dependencies (`with` clauses), which may not depend on a scenario.

Scenarios work the same way with project hierarchies: you can either duplicate a variable similar to `Mode` in each of the project (as long as the first argument to `external` is always the same and the type is the same), or simply set the variable in the `shared.gpr` project (see Sharing Between Projects).

Next: Project Extension, Previous: Scenarios in Projects, Up: GNAT Project Manager

### 11.5 Library Projects

So far, we have seen examples of projects that create executables. However, it is also possible to create libraries instead. A library is a specific type of subsystem where, for convenience, objects are grouped together using system-specific means such as archives or windows DLLs.

Library projects provide a system- and language-independent way of building both static and dynamic libraries. They also support the concept of standalone libraries (SAL) which offers two significant properties: the elaboration (e.g. initialization) of the library is either automatic or very simple; a change in the implementation part of the library implies minimal post-compilation actions on the complete system and potentially no action at all for the rest of the system in the case of dynamic SALs.

The GNAT Project Manager takes complete care of the library build, rebuild and installation tasks, including recompilation of the source files for which objects do not exist or are not up to date, assembly of the library archive, and installation of the library (i.e., copying associated source, object and `ALI` files to the specified location).

Next: Using Library Projects, Up: Library Projects

#### 11.5.1 Building Libraries

Let's enhance our example and transform the `logging` subsystem into a library. In order to do so, a few changes need to be made to `logging.gpr`. A number of specific attributes needs to be defined: at least `Library_Name` and `Library_Dir`; in addition, a number of other attributes can be used to specify specific aspects of the library. For readability, it is also recommended (although not mandatory), to use the qualifier `library` in front of the `project` keyword.

Library_Name:
  This attribute is the name of the library to be built. There is no restriction on the name of a library imposed by the project manager, except for stand-alone libraries whose names must follow the syntax of Ada identifiers; however, there may be system specific restrictions on the name. In general, it is recommended to stick to alphanumeric characters (and possibly single underscores) to help portability.
Library_Dir:
  This attribute is the path (absolute or relative) of the directory where the library is to be installed. In the process of building a library, the sources are compiled, the object files end up in the explicit or implicit `Object_Dir` directory. When all sources of a library are compiled, some of the compilation artifacts, including the library itself, are copied to the library_dir directory. This directory must exists and be writable. It must also be different from the object directory so that cleanup activities in the Library_Dir do not affect recompilation needs.

Here is the new version of `logging.gpr` that makes it a library:

         library project Logging is          --  "library" is optional
            for Library_Name use "logging";  --  will create "liblogging.a" on Unix
            for Object_Dir   use "obj";
            for Library_Dir  use "lib";      --  different from object_dir
         end Logging;

Once the above two attributes are defined, the library project is valid and is enough for building a library with default characteristics. Other library-related attributes can be used to change the defaults:

Library_Kind:
  The value of this attribute must be either `"static"`, `"dynamic"` or `"relocatable"` (the latter is a synonym for dynamic). It indicates which kind of library should be built (the default is to build a static library, that is an archive of object files that can potentially be linked into a static executable). When the library is set to be dynamic, a separate image is created that will be loaded independently, usually at the start of the main program execution. Support for dynamic libraries is very platform specific, for instance on Windows it takes the form of a DLL while on GNU/Linux, it is a dynamic elf image whose suffix is usually `.so`. Library project files, on the other hand, can be written in a platform independent way so that the same project file can be used to build a library on different operating systems.

  If you need to build both a static and a dynamic library, it is recommended use two different object directories, since in some cases some extra code needs to be generated for the latter. For such cases, one can either define two different project files, or a single one which uses scenarios to indicate the various kinds of library to be built and their corresponding object_dir.

Library_ALI_Dir:
  This attribute may be specified to indicate the directory where the ALI files of the library are installed. By default, they are copied into the `Library_Dir` directory, but as for the executables where we have a separate `Exec_Dir` attribute, you might want to put them in a separate directory since there can be hundreds of them. The same restrictions as for the `Library_Dir` attribute apply.

Library_Version:
  This attribute is platform dependent, and has no effect on VMS and Windows. On Unix, it is used only for dynamic libraries as the internal name of the library (the `"soname"`). If the library file name (built from the `Library_Name`) is different from the `Library_Version`, then the library file will be a symbolic link to the actual file whose name will be `Library_Version`. This follows the usual installation schemes for dynamic libraries on many Unix systems.

                  project Logging is
                     Version := "1";
                     for Library_Dir use "lib";
                     for Library_Name use "logging";
                     for Library_Kind use "dynamic";
                     for Library_Version use "liblogging.so." & Version;
                  end Logging;

  After the compilation, the directory `lib` will contain both a `libdummy.so.1` library and a symbolic link to it called `libdummy.so`.

Library_GCC:
  This attribute is the name of the tool to use instead of "gcc" to link shared libraries. A common use of this attribute is to define a wrapper script that accomplishes specific actions before calling gcc (which itself is calling the linker to build the library image).
Library_Options:
  This attribute may be used to specify additional switches (last switches) when linking a shared library.
Leading_Library_Options:
  This attribute, that is taken into account only by `gprbuild`, may be used to specified leading options (first switches) when linking a shared library.

Linker.Linker_Options:
  This attribute specifies additional switches to be given to the linker when linking an executable. It is ignored when defined in the main project and taken into account in all other projects that are imported directly or indirectly. These switches complement the `Linker.Switches` defined in the main project. This is useful when a particular subsystem depends on an external library: adding this dependency as a `Linker_Options` in the project of the subsystem is more convenient than adding it to all the `Linker.Switches` of the main projects that depend upon this subsystem.

Next: Stand-alone Library Projects, Previous: Building Libraries, Up: Library Projects

#### 11.5.2 Using Library Projects

When the builder detects that a project file is a library project file, it recompiles all sources of the project that need recompilation and rebuild the library if any of the sources have been recompiled. It then groups all object files into a single file, which is a shared or a static library. This library can later on be linked with multiple executables. Note that the use of shard libraries reduces the size of the final executable and can also reduce the memory footprint at execution time when the library is shared among several executables.

It is also possible to build multi-language libraries. When using `gprbuild` as a builder, multi-language library projects allow naturally the creation of multi-language libraries . `gnatmake`, does not try to compile non Ada sources. However, when the project is multi-language, it will automatically link all object files found in the object directory, whether or not they were compiled from an Ada source file. This specific behavior does not apply to Ada-only projects which only take into account the objects corresponding to the sources of the project.

A non-library project can import a library project. When the builder is invoked on the former, the library of the latter is only rebuilt when absolutely necessary. For instance, if a unit of the library is not up-to-date but non of the executables need this unit, then the unit is not recompiled and the library is not reassembled. For instance, let's assume in our example that logging has the following sources: `log1.ads`, `log1.adb`, `log2.ads` and `log2.adb`. If `log1.adb` has been modified, then the library `liblogging` will be rebuilt when compiling all the sources of `Build` only if `proc.ads`, `pack.ads` or `pack.adb` include a `"with Log1"`.

To ensure that all the sources in the `Logging` library are up to date, and that all the sources of `Build` are also up to date, the following two commands needs to be used:

         gnatmake -Plogging.gpr
         gnatmake -Pbuild.gpr

All `ALI` files will also be copied from the object directory to the library directory. To build executables, `gnatmake` will use the library rather than the individual object files.

Library projects can also be useful to describe a library that need to be used but, for some reason, cannot be rebuilt. For instance, it is the case when some of the library sources are not available. Such library projects need simply to use the `Externally_Built` attribute as in the example below:

         library project Extern_Lib is
            for Languages    use ("Ada", "C");
            for Source_Dirs  use ("lib_src");
            for Library_Dir  use "lib2";
            for Library_Kind use "dynamic";
            for Library_Name use "l2";
            for Externally_Built use "true";  --  <<<<
         end Extern_Lib;

In the case of externally built libraries, the `Object_Dir` attribute does not need to be specified because it will never be used.

The main effect of using such an externally built library project is mostly to affect the linker command in order to reference the desired library. It can also be achieved by using `Linker.Linker_Options` or `Linker.Switches` in the project corresponding to the subsystem needing this external library. This latter method is more straightforward in simple cases but when several subsystems depend upon the same external library, finding the proper place for the `Linker.Linker_Options` might not be easy and if it is not placed properly, the final link command is likely to present ordering issues. In such a situation, it is better to use the externally built library project so that all other subsystems depending on it can declare this dependency thanks to a project `with` clause, which in turn will trigger the builder to find the proper order of libraries in the final link command.

Next: Installing a library with project files, Previous: Using Library Projects, Up: Library Projects

#### 11.5.3 Stand-alone Library Projects

A stand-alone library is a library that contains the necessary code to elaborate the Ada units that are included in the library. A stand-alone library is a convenient way to add an Ada subsystem to a more global system whose main is not in Ada since it makes the elaboration of the Ada part mostly transparent. However, stand-alone libraries are also useful when the main is in Ada: they provide a means for minimizing relinking & redeployment of complex systems when localized changes are made.

The name of a stand-alone library, specified with attribute `Library_Name`, must have the syntax of an Ada identifier.

The most prominent characteristic of a stand-alone library is that it offers a distinction between interface units and implementation units. Only the former are visible to units outside the library. A stand-alone library project is thus characterised by a third attribute, usually Library_Interface, in addition to the two attributes that make a project a Library Project (`Library_Name` and `Library_Dir`). This third attribute may also be Interfaces. Library_Interface only works when the interface is in Ada and takes a list of units as parameter. Interfaces works for any supported language and takes a list of sources as parameter.

Library_Interface:
  This attribute defines an explicit subset of the units of the project. Units from projects importing this library project may only "with" units whose sources are listed in the `Library_Interface`. Other sources are considered implementation units.

                     for Library_Dir use "lib";
                     for Library_Name use "loggin";
                     for Library_Interface use ("lib1", "lib2");  --  unit names

Interfaces
  This attribute defines an explicit subset of the source files of a project. Sources from projects importing this project, can only depend on sources from this subset. This attribute can be used on non library projects. It can also be used as a replacement for attribute `Library_Interface`, in which case, units have to be replaced by source files. For multi-language library projects, it is the only way to make the project a Stand-Alone Library project whose interface is not purely Ada.
Library_Standalone:
  This attribute defines the kind of standalone library to build. Values are either `standard` (the default), `no` or `encapsulated`. When `standard` is used the code to elaborate and finalize the library is embedded, when `encapsulated` is used the library can furthermore only depends on static libraries (including the GNAT runtime). This attribute can be set to `no` to make it clear that the library should not be standalone in which case the `Library_Interface` should not defined.

                     for Library_Dir use "lib";
                     for Library_Name use "loggin";
                     for Library_Interface use ("lib1", "lib2");  --  unit names
                     for Library_Standalone use "encapsulated";

In order to include the elaboration code in the stand-alone library, the binder is invoked on the closure of the library units creating a package whose name depends on the library name (b~logging.ads/b in the example). This binder-generated package includes initialization and finalization procedures whose names depend on the library name (`logginginit` and `loggingfinal` in the example). The object corresponding to this package is included in the library.

Library_Auto_Init:
  A dynamic stand-alone Library is automatically initialized if automatic initialization of Stand-alone Libraries is supported on the platform and if attribute Library_Auto_Init is not specified or is specified with the value "true". A static Stand-alone Library is never automatically initialized. Specifying "false" for this attribute prevent automatic initialization.

  When a non-automatically initialized stand-alone library is used in an executable, its initialization procedure must be called before any service of the library is used. When the main subprogram is in Ada, it may mean that the initialization procedure has to be called during elaboration of another package.

Library_Dir:
  For a stand-alone library, only the `ALI` files of the interface units (those that are listed in attribute `Library_Interface`) are copied to the library directory. As a consequence, only the interface units may be imported from Ada units outside of the library. If other units are imported, the binding phase will fail.
Binder.Default_Switches:
  When a stand-alone library is bound, the switches that are specified in the attribute Binder.Default_Switches ("Ada") are used in the call to `gnatbind`.
Library_Src_Dir:
  This attribute defines the location (absolute or relative to the project directory) where the sources of the interface units are copied at installation time. These sources includes the specs of the interface units along with the closure of sources necessary to compile them successfully. That may include bodies and subunits, when pragmas `Inline` are used, or when there is a generic units in the spec. This directory cannot point to the object directory or one of the source directories, but it can point to the library directory, which is the default value for this attribute.
Library_Symbol_Policy:
  This attribute controls the export of symbols and, on some platforms (like VMS) that have the notions of major and minor IDs built in the library files, it controls the setting of these IDs. It is not supported on all platforms (where it will just have no effect). It may have one of the following values:
  - `"autonomous"` or `"default"`: exported symbols are not controlled
  - `"compliant"`: if attribute Library_Reference_Symbol_File is not defined, then it is equivalent to policy "autonomous". If there are exported symbols in the reference symbol file that are not in the object files of the interfaces, the major ID of the library is increased. If there are symbols in the object files of the interfaces that are not in the reference symbol file, these symbols are put at the end of the list in the newly created symbol file and the minor ID is increased.
  - `"controlled"`: the attribute Library_Reference_Symbol_File must be defined. The library will fail to build if the exported symbols in the object files of the interfaces do not match exactly the symbol in the symbol file.
  - `"restricted"`: The attribute Library_Symbol_File must be defined. The library will fail to build if there are symbols in the symbol file that are not in the exported symbols of the object files of the interfaces. Additional symbols in the object files are not added to the symbol file.
  - `"direct"`: The attribute Library_Symbol_File must be defined and must designate an existing file in the object directory. This symbol file is passed directly to the underlying linker without any symbol processing.
Library_Reference_Symbol_File
  This attribute may define the path name of a reference symbol file that is read when the symbol policy is either "compliant" or "controlled", on platforms that support symbol control, such as VMS, when building a stand-alone library. The path may be an absolute path or a path relative to the project directory.
Library_Symbol_File
  This attribute may define the name of the symbol file to be created when building a stand-alone library when the symbol policy is either "compliant", "controlled" or "restricted", on platforms that support symbol control, such as VMS. When symbol policy is "direct", then a file with this name must exist in the object directory.

Previous: Stand-alone Library Projects, Up: Library Projects

#### 11.5.4 Installing a library with project files

When using project files, a usable version of the library is created in the directory specified by the `Library_Dir` attribute of the library project file. Thus no further action is needed in order to make use of the libraries that are built as part of the general application build.

You may want to install a library in a context different from where the library is built. This situation arises with third party suppliers, who may want to distribute a library in binary form where the user is not expected to be able to recompile the library. The simplest option in this case is to provide a project file slightly different from the one used to build the library, by using the `externally_built` attribute. Using Library Projects

Another option is to use `gprinstall` to install the library in a different context than the build location. A project to use this library is generated automatically by `gprinstall` which also copy, in the install location, the minimum set of sources needed to use the library. Installation

Next: Aggregate Projects, Previous: Library Projects, Up: GNAT Project Manager

### 11.6 Project Extension

During development of a large system, it is sometimes necessary to use modified versions of some of the source files, without changing the original sources. This can be achieved through the project extension facility.

Suppose for instance that our example `Build` project is built every night for the whole team, in some shared directory. A developer usually need to work on a small part of the system, and might not want to have a copy of all the sources and all the object files (mostly because that would require too much disk space, time to recompile everything). He prefers to be able to override some of the source files in his directory, while taking advantage of all the object files generated at night.

Another example can be taken from large software systems, where it is common to have multiple implementations of a common interface; in Ada terms, multiple versions of a package body for the same spec. For example, one implementation might be safe for use in tasking programs, while another might only be used in sequential applications. This can be modeled in GNAT using the concept of project extension. If one project (the “child”) extends another project (the “parent”) then by default all source files of the parent project are inherited by the child, but the child project can override any of the parent's source files with new versions, and can also add new files or remove unnecessary ones. This facility is the project analog of a type extension in object-oriented programming. Project hierarchies are permitted (an extending project may itself be extended), and a project that extends a project can also import other projects.

A third example is that of using project extensions to provide different versions of the same system. For instance, assume that a `Common` project is used by two development branches. One of the branches has now been frozen, and no further change can be done to it or to `Common`. However, the other development branch still needs evolution of `Common`. Project extensions provide a flexible solution to create a new version of a subsystem while sharing and reusing as much as possible from the original one.

A project extension inherits implicitly all the sources and objects from the project it extends. It is possible to create a new version of some of the sources in one of the additional source dirs of the extending project. Those new versions hide the original versions. Adding new sources or removing existing ones is also possible. Here is an example on how to extend the project `Build` from previous examples:

            project Work extends "../bld/build.gpr" is
            end Work;

The project after extends is the one being extended. As usual, it can be specified using an absolute path, or a path relative to any of the directories in the project path (see Project Dependencies). This project does not specify source or object directories, so the default value for these attribute will be used that is to say the current directory (where project `Work` is placed). We can already compile that project with

            gnatmake -Pwork

If no sources have been placed in the current directory, this command won't do anything, since this project does not change the sources it inherited from `Build`, therefore all the object files in `Build` and its dependencies are still valid and are reused automatically.

Suppose we now want to supply an alternate version of `pack.adb` but use the existing versions of `pack.ads` and `proc.adb`. We can create the new file Work's current directory (likely by copying the one from the `Build` project and making changes to it. If new packages are needed at the same time, we simply create new files in the source directory of the extending project.

When we recompile, `gnatmake` will now automatically recompile this file (thus creating `pack.o` in the current directory) and any file that depends on it (thus creating `proc.o`). Finally, the executable is also linked locally.

Note that we could have obtained the desired behavior using project import rather than project inheritance. A `base` project would contain the sources for `pack.ads` and `proc.adb`, and `Work` would import `base` and add `pack.adb`. In this scenario, `base` cannot contain the original version of `pack.adb` otherwise there would be 2 versions of the same unit in the closure of the project and this is not allowed. Generally speaking, it is not recommended to put the spec and the body of a unit in different projects since this affects their autonomy and reusability.

In a project file that extends another project, it is possible to indicate that an inherited source is not part of the sources of the extending project. This is necessary sometimes when a package spec has been overridden and no longer requires a body: in this case, it is necessary to indicate that the inherited body is not part of the sources of the project, otherwise there will be a compilation error when compiling the spec.

For that purpose, the attribute Excluded_Source_Files is used. Its value is a list of file names. It is also possible to use attribute `Excluded_Source_List_File`. Its value is the path of a text file containing one file name per line.

         project Work extends "../bld/build.gpr" is
            for Source_Files use ("pack.ads");
            --  New spec of Pkg does not need a completion
            for Excluded_Source_Files use ("pack.adb");
         end Work;

All packages that are not declared in the extending project are inherited from the project being extended, with their attributes, with the exception of `Linker'Linker_Options` which is never inherited. In particular, an extending project retains all the switches specified in the project being extended.

At the project level, if they are not declared in the extending project, some attributes are inherited from the project being extended. They are: `Languages`, `Main` (for a root non library project) and `Library_Name` (for a project extending a library project)

Up: Project Extension

#### 11.6.1 Project Hierarchy Extension

One of the fundamental restrictions in project extension is the following: A project is not allowed to import directly or indirectly at the same time an extending project and one of its ancestors.

By means of example, consider the following hierarchy of projects.

            a.gpr  contains package A1
            b.gpr, imports a.gpr and contains B1, which depends on A1
            c.gpr, imports b.gpr and contains C1, which depends on B1

If we want to locally extend the packages `A1` and `C1`, we need to create several extending projects:

            a_ext.gpr which extends a.gpr, and overrides A1
            b_ext.gpr which extends b.gpr and imports a_ext.gpr
            c_ext.gpr which extends c.gpr, imports b_ext.gpr and overrides C1

            project A_Ext extends "a.gpr" is
               for Source_Files use ("a1.adb", "a1.ads");
            end A_Ext;

            with "a_ext.gpr";
            project B_Ext extends "b.gpr" is
            end B_Ext;

            with "b_ext.gpr";
            project C_Ext extends "c.gpr" is
               for Source_Files use ("c1.adb");
            end C_Ext;

The extension `b_ext.gpr` is required, even though we are not overriding any of the sources of `b.gpr` because otherwise `c_expr.gpr` would import `b.gpr` which itself knows nothing about `a_ext.gpr`.

When extending a large system spanning multiple projects, it is often inconvenient to extend every project in the hierarchy that is impacted by a small change introduced in a low layer. In such cases, it is possible to create an implicit extension of entire hierarchy using extends all relationship.

When the project is extended using `extends all` inheritance, all projects that are imported by it, both directly and indirectly, are considered virtually extended. That is, the project manager creates implicit projects that extend every project in the hierarchy; all these implicit projects do not control sources on their own and use the object directory of the "extending all" project.

It is possible to explicitly extend one or more projects in the hierarchy in order to modify the sources. These extending projects must be imported by the "extending all" project, which will replace the corresponding virtual projects with the explicit ones.

When building such a project hierarchy extension, the project manager will ensure that both modified sources and sources in implicit extending projects that depend on them, are recompiled.

Thus, in our example we could create the following projects instead:

            a_ext.gpr, extends a.gpr and overrides A1
            c_ext.gpr, "extends all" c.gpr, imports a_ext.gpr and overrides C1

            project A_Ext extends "a.gpr" is
               for Source_Files use ("a1.adb", "a1.ads");
            end A_Ext;

            with "a_ext.gpr";
            project C_Ext extends all "c.gpr" is
              for Source_Files use ("c1.adb");
            end C_Ext;

When building project `c_ext.gpr`, the entire modified project space is considered for recompilation, including the sources of `b.gpr` that are impacted by the changes in `A1` and `C1`.

Next: Aggregate Library Projects, Previous: Project Extension, Up: GNAT Project Manager

### 11.7 Aggregate Projects

Aggregate projects are an extension of the project paradigm, and are meant to solve a few specific use cases that cannot be solved directly using standard projects. This section will go over a few of these use cases to try to explain what you can use aggregate projects for.

Next: Building a set of projects with a single command, Up: Aggregate Projects

#### 11.7.1 Building all main programs from a single project tree

Most often, an application is organized into modules and submodules, which are very conveniently represented as a project tree or graph (the root project A `with`s the projects for each modules (say B and C), which in turn `with` projects for submodules.

Very often, modules will build their own executables (for testing purposes for instance), or libraries (for easier reuse in various contexts).

However, if you build your project through `gnatmake` or `gprbuild`, using a syntax similar to

            gprbuild -PA.gpr

this will only rebuild the main programs of project A, not those of the imported projects B and C. Therefore you have to spawn several `gnatmake` commands, one per project, to build all executables. This is a little inconvenient, but more importantly is inefficient because `gnatmake` needs to do duplicate work to ensure that sources are up-to-date, and cannot easily compile things in parallel when using the -j switch.

Also libraries are always rebuilt when building a project.

You could therefore define an aggregate project Agg that groups A, B and C. Then, when you build with

             gprbuild -PAgg.gpr

this will build all mains from A, B and C.

            aggregate project Agg is
               for Project_Files use ("a.gpr", "b.gpr", "c.gpr");
            end Agg;

If B or C do not define any main program (through their Main attribute), all their sources are built. When you do not group them in the aggregate project, only those sources that are needed by A will be built.

If you add a main to a project P not already explicitly referenced in the aggregate project, you will need to add "p.gpr" in the list of project files for the aggregate project, or the main will not be built when building the aggregate project.

Next: Define a build environment, Previous: Building all main programs from a single project tree, Up: Aggregate Projects

#### 11.7.2 Building a set of projects with a single command

One other case is when you have multiple applications and libraries that are built independently from each other (but can be built in parallel). For instance, you have a project tree rooted at A, and another one (which might share some subprojects) rooted at B.

Using only `gprbuild`, you could do

           gprbuild -PA.gpr
           gprbuild -PB.gpr

to build both. But again, `gprbuild` has to do some duplicate work for those files that are shared between the two, and cannot truly build things in parallel efficiently.

If the two projects are really independent, share no sources other than through a common subproject, and have no source files with a common basename, you could create a project C that imports A and B. But these restrictions are often too strong, and one has to build them independently. An aggregate project does not have these limitations and can aggregate two project trees that have common sources.

This scenario is particularly useful in environments like VxWorks 653 where the applications running in the multiple partitions can be built in parallel through a single `gprbuild` command. This also works nicely with Annex E.

Next: Performance improvements in builder, Previous: Building a set of projects with a single command, Up: Aggregate Projects

#### 11.7.3 Define a build environment

The environment variables at the time you launch `gprbuild` or `gnatmake` will influence the view these tools have of the project (PATH to find the compiler, ADA_PROJECT_PATH or GPR_PROJECT_PATH to find the projects, environment variables that are referenced in project files through the "external" statement,...). Several command line switches can be used to override those (-X or -aP), but on some systems and with some projects, this might make the command line too long, and on all systems often make it hard to read.

An aggregate project can be used to set the environment for all projects built through that aggregate. One of the nice aspects is that you can put the aggregate project under configuration management, and make sure all your user have a consistent environment when building. The syntax looks like

            aggregate project Agg is
               for Project_Files use ("A.gpr", "B.gpr");
               for Project_Path use ("../dir1", "../dir1/dir2");
               for External ("BUILD") use "PRODUCTION";

               package Builder is
                  for Switches ("Ada") use ("-q");
               end Builder;
            end Agg;

One of the often requested features in projects is to be able to reference external variables in `with` statements, as in

           with external("SETUP") & "path/prj.gpr";   --  ILLEGAL
           project MyProject is
              ...
           end MyProject;

For various reasons, this isn't authorized. But using aggregate projects provide an elegant solution. For instance, you could use a project file like:

         aggregate project Agg is
             for Project_Path use (external("SETUP") % "path");
             for Project_Files use ("myproject.gpr");
         end Agg;

         with "prj.gpr";  --  searched on Agg'Project_Path
         project MyProject is
            ...
         end MyProject;

Next: Syntax of aggregate projects, Previous: Define a build environment, Up: Aggregate Projects

#### 11.7.4 Performance improvements in builder

The loading of aggregate projects is optimized in `gprbuild` and `gnatmake`, so that all files are searched for only once on the disk (thus reducing the number of system calls and contributing to faster compilation times especially on systems with sources on remote servers). As part of the loading, `gprbuild` and `gnatmake` compute how and where a source file should be compiled, and even if it is found several times in the aggregated projects it will be compiled only once.

Since there is no ambiguity as to which switches should be used, files can be compiled in parallel (through the usual -j switch) and this can be done while maximizing the use of CPUs (compared to launching multiple `gprbuild` and `gnatmake` commands in parallel).

Next: package Builder in aggregate projects, Previous: Performance improvements in builder, Up: Aggregate Projects

#### 11.7.5 Syntax of aggregate projects

An aggregate project follows the general syntax of project files. The recommended extension is still `.gpr`. However, a special `aggregate` qualifier must be put before the keyword `project`.

An aggregate project cannot `with` any other project (standard or aggregate), except an abstract project which can be used to share attribute values. Building other aggregate projects from an aggregate project is done through the Project_Files attribute (see below).

An aggregate project does not have any source files directly (only through other standard projects). Therefore a number of the standard attributes and packages are forbidden in an aggregate project. Here is the (non exhaustive) list:

- Languages
- Source_Files, Source_List_File and other attributes dealing with list of sources.
- Source_Dirs, Exec_Dir and Object_Dir
- Library_Dir, Library_Name and other library-related attributes
- Main
- Roots
- Externally_Built
- Inherit_Source_Path
- Excluded_Source_Dirs
- Locally_Removed_Files
- Excluded_Source_Files
- Excluded_Source_List_File
- Interfaces

The only package that is authorized (albeit optional) is Builder. Other packages (in particular Compiler, Binder and Linker) are forbidden. It is an error to have any of these (and such an error prevents the proper loading of the aggregate project).

Three new attributes have been created, which can only be used in the context of aggregate projects:

Project_Files:
  This attribute is compulsory (or else we are not aggregating any project, and thus not doing anything). It specifies a list of `.gpr` files that are grouped in the aggregate. The list may be empty. The project files can be either other aggregate projects, or standard projects. When grouping standard projects, you can have both the root of a project tree (and you do not need to specify all its imported projects), and any project within the tree.

  Basically, the idea is to specify all those projects that have main programs you want to build and link, or libraries you want to build. You can even specify projects that do not use the Main attribute nor the `Library_*` attributes, and the result will be to build all their source files (not just the ones needed by other projects).

  The file can include paths (absolute or relative). Paths are relative to the location of the aggregate project file itself (if you use a base name, we expect to find the .gpr file in the same directory as the aggregate project file). The extension `.gpr` is mandatory, since this attribute contains file names, not project names.

  Paths can also include the `"*"` and `"**"` globbing patterns. The latter indicates that any subdirectory (recursively) will be searched for matching files. The latter (`"**"`) can only occur at the last position in the directory part (ie `"a/**/*.gpr"` is supported, but not `"**/a/*.gpr"`). Starting the pattern with `"**"` is equivalent to starting with `"./**"`.

  For now, the pattern `"*"` is only allowed in the filename part, not in the directory part. This is mostly for efficiency reasons to limit the number of system calls that are needed.

  Here are a few valid examples:

                    for Project_Files use ("a.gpr", "subdir/b.gpr");
                    --  two specific projects relative to the directory of agg.gpr

                    for Project_Files use ("**/*.gpr");
                    --  all projects recursively

Project_Path:
  This attribute can be used to specify a list of directories in which to look for project files in `with` statements.

  When you specify a project in Project_Files say `"x/y/a.gpr"`), and this projects imports a project "b.gpr", only b.gpr is searched in the project path. a.gpr must be exactly at <dir of the aggregate>/x/y/a.gpr.

  This attribute, however, does not affect the search for the aggregated project files specified with `Project_Files`.

  Each aggregate project has its own (that is if agg1.gpr includes agg2.gpr, they can potentially both have a different project path).

  This project path is defined as the concatenation, in that order, of:

  - the current directory;
  - followed by the command line -aP switches;
  - then the directories from the GPR_PROJECT_PATH and ADA_PROJECT_PATH environment variables;
  - then the directories from the Project_Path attribute;
  - and finally the predefined directories.

  In the example above, agg2.gpr's project path is not influenced by the attribute agg1'Project_Path, nor is agg1 influenced by agg2'Project_Path.

  This can potentially lead to errors. In the following example:

                     +---------------+                  +----------------+
                     | Agg1.gpr      |-=--includes--=-->| Agg2.gpr       |
                     |  'project_path|                  |  'project_path |
                     |               |                  |                |
                     +---------------+                  +----------------+
                           :                                   :
                           includes                        includes
                           :                                   :
                           v                                   v
                       +-------+                          +---------+
                       | P.gpr |<---------- withs --------|  Q.gpr  |
                       +-------+---------\                +---------+
                           |             |
                           withs         |
                           |             |
                           v             v
                       +-------+      +---------+
                       | R.gpr |      | R'.gpr  |
                       +-------+      +---------+

  When looking for p.gpr, both aggregates find the same physical file on the disk. However, it might happen that with their different project paths, both aggregate projects would in fact find a different r.gpr. Since we have a common project (p.gpr) "with"ing two different r.gpr, this will be reported as an error by the builder.

  Directories are relative to the location of the aggregate project file.

  Here are a few valid examples:

                   for Project_Path use ("/usr/local/gpr", "gpr/");

External:
  This attribute can be used to set the value of environment variables as retrieved through the `external` statement in projects. It does not affect the environment variables themselves (so for instance you cannot use it to change the value of your PATH as seen from the spawned compiler).

  This attribute affects the external values as seen in the rest of the aggreate projects, and in the aggregated projects.

  The exact value of external a variable comes from one of three sources (each level overrides the previous levels):

  - An External attribute in aggregate project, for instance `for External ("BUILD_MODE") use "DEBUG"`;
  - Environment variables

    These override the value given by the attribute, so that users can override the value set in the (presumably shared with others in his team) aggregate project.

  - The -X command line switch to `gprbuild` and `gnatmake`

    This always takes precedence.

  This attribute is only taken into account in the main aggregate project (i.e. the one specified on the command line to `gprbuild` or `gnatmake`), and ignored in other aggregate projects. It is invalid in standard projects. The goal is to have a consistent value in all projects that are built through the aggregate, which would not be the case in the diamond case: A groups the aggregate projects B and C, which both (either directly or indirectly) build the project P. If B and C could set different values for the environment variables, we would have two different views of P, which in particular might impact the list of source files in P.

Previous: Syntax of aggregate projects, Up: Aggregate Projects

#### 11.7.6 package Builder in aggregate projects

As we mentioned before, only the package Builder can be specified in an aggregate project. In this package, only the following attributes are valid:

Switches:
  This attribute gives the list of switches to use for the builder (`gprbuild` or `gnatmake`), depending on the language of the main file. For instance,

                for Switches ("Ada") use ("-d", "-p");
                for Switches ("C")   use ("-p");

  These switches are only read from the main aggregate project (the one passed on the command line), and ignored in all other aggregate projects or projects.

  It can only contain builder switches, not compiler switches.

Global_Compilation_Switches
  This attribute gives the list of compiler switches for the various languages. For instance,

                for Global_Compilation_Switches ("Ada") use ("-O1", "-g");
                for Global_Compilation_Switches ("C")   use ("-O2");

  This attribute is only taken into account in the aggregate project specified on the command line, not in other aggregate projects.

  In the projects grouped by that aggregate, the attribute Builder.Global_Compilation_Switches is also ignored. However, the attribute Compiler.Default_Switches will be taken into account (but that of the aggregate have higher priority). The attribute Compiler.Switches is also taken into account and can be used to override the switches for a specific file. As a result, it always has priority.

  The rules are meant to avoid ambiguities when compiling. For instance, aggregate project Agg groups the projects A and B, that both depend on C. Here is an extra for all of these projects:

                      aggregate project Agg is
                          for Project_Files use ("a.gpr", "b.gpr");
                          package Builder is
                             for Global_Compilation_Switches ("Ada") use ("-O2");
                          end Builder;
                      end Agg;

                      with "c.gpr";
                      project A is
                          package Builder is
                             for Global_Compilation_Switches ("Ada") use ("-O1");
                             --  ignored
                          end Builder;

                          package Compiler is
                             for Default_Switches ("Ada") use ("-O1", "-g");
                             for Switches ("a_file1.adb") use ("-O0");
                          end Compiler;
                      end A;

                      with "c.gpr";
                      project B is
                          package Compiler is
                             for Default_Switches ("Ada") use ("-O0");
                          end Compiler;
                      end B;

                      project C is
                          package Compiler is
                             for Default_Switches ("Ada") use ("-O3", "-gnatn");
                             for Switches ("c_file1.adb") use ("-O0", "-g");
                          end Compiler;
                      end C;

  then the following switches are used:

  - all files from project A except a_file1.adb are compiled with "-O2 -g", since the aggregate project has priority.
  - the file a_file1.adb is compiled with "-O0", since the Compiler.Switches has priority
  - all files from project B are compiled with "-O2", since the aggregate project has priority
  - all files from C are compiled with "-O2 -gnatn", except for c_file1.adb which is compiled with "-O0 -g"

  Even though C is seen through two paths (through A and through B), the switches used by the compiler are unambiguous.

Global_Configuration_Pragmas
  This attribute can be used to specify a file containing configuration pragmas, to be passed to the compiler. Since we ignore the package Builder in other aggregate projects and projects, only those pragmas defined in the main aggregate project will be taken into account.

  Projects can locally add to those by using the `Compiler.Local_Configuration_Pragmas` attribute if they need.

For projects that are built through the aggregate, the package Builder is ignored, except for the Executable attribute which specifies the name of the executables resulting from the link of the main programs, and for the Executable_Suffix.

Next: Project File Reference, Previous: Aggregate Projects, Up: GNAT Project Manager

### 11.8 Aggregate Library Projects

Aggregate library projects make it possible to build a single library using object files built using other standard or library projects. This gives the flexibility to describe an application as having multiple modules (a GUI, database access, ...) using different project files (so possibly built with different compiler options) and yet create a single library (static or relocatable) out of the corresponding object files.

Next: Syntax of aggregate library projects, Up: Aggregate Library Projects

#### 11.8.1 Building aggregate library projects

For example, we can define an aggregate project Agg that groups A, B and C:

            aggregate library project Agg is
               for Project_Files use ("a.gpr", "b.gpr", "c.gpr");
               for Library_Name use ("agg");
               for Library_Dir use ("lagg");
            end Agg;

Then, when you build with:

             gprbuild agg.gpr

This will build all units from projects A, B and C and will create a static library named `libagg.a` into the `lagg` directory. An aggregate library project has the same set of restriction as a standard library project.

Note that a shared aggregate library project cannot aggregates a static library project. In platforms where a compiler option is required to create relocatable object files, a Builder package in the aggregate library project may be used:

            aggregate library project Agg is
               for Project_Files use ("a.gpr", "b.gpr", "c.gpr");
               for Library_Name use ("agg");
               for Library_Dir use ("lagg");
               for Library_Kind use "relocatable";

               package Builder is
                  for Global_Compilation_Switches ("Ada") use ("-fPIC");
               end Builder;
            end Agg;

With the above aggregate library Builder package, the `-fPIC` option will be passed to the compiler when building any source code from projects `a.gpr`, `b.gpr` and `c.gpr`.

Previous: Building aggregate library projects, Up: Aggregate Library Projects

#### 11.8.2 Syntax of aggregate library projects

An aggregate library project follows the general syntax of project files. The recommended extension is still `.gpr`. However, a special `aggregate library` qualifier must be put before the keyword `project`.

An aggregate library project cannot `with` any other project (standard or aggregate), except an abstract project which can be used to share attribute values.

An aggregate library project does not have any source files directly (only through other standard projects). Therefore a number of the standard attributes and packages are forbidden in an aggregate library project. Here is the (non exhaustive) list:

- Languages
- Source_Files, Source_List_File and other attributes dealing with list of sources.
- Source_Dirs, Exec_Dir and Object_Dir
- Main
- Roots
- Externally_Built
- Inherit_Source_Path
- Excluded_Source_Dirs
- Locally_Removed_Files
- Excluded_Source_Files
- Excluded_Source_List_File
- Interfaces

The only package that is authorized (albeit optional) is Builder.

The Project_Files attribute (See see Aggregate Projects) is used to described the aggregated projects whose object files have to be included into the aggregate library.

Previous: Aggregate Library Projects, Up: GNAT Project Manager

### 11.9 Project File Reference

This section describes the syntactic structure of project files, the various constructs that can be used. Finally, it ends with a summary of all available attributes.

Next: Qualified Projects, Up: Project File Reference

#### 11.9.1 Project Declaration

Project files have an Ada-like syntax. The minimal project file is:

         project Empty is
         end Empty;

The identifier `Empty` is the name of the project. This project name must be present after the reserved word `end` at the end of the project file, followed by a semi-colon.

Identifiers (i.e. the user-defined names such as project or variable names) have the same syntax as Ada identifiers: they must start with a letter, and be followed by zero or more letters, digits or underscore characters; it is also illegal to have two underscores next to each other. Identifiers are always case-insensitive ("Name" is the same as "name").

         simple_name ::= identifier
         name        ::= simple_name { . simple_name }

Strings are used for values of attributes or as indexes for these attributes. They are in general case sensitive, except when noted otherwise (in particular, strings representing file names will be case insensitive on some systems, so that "file.adb" and "File.adb" both represent the same file).

Reserved words are the same as for standard Ada 95, and cannot be used for identifiers. In particular, the following words are currently used in project files, but others could be added later on. In bold are the extra reserved words in project files: `all, at, case, end, for, is, limited, null, others, package, renames, type, use, when, with,` extends`,` external`,` project.

Comments in project files have the same syntax as in Ada, two consecutive hyphens through the end of the line.

A project may be an independent project, entirely defined by a single project file. Any source file in an independent project depends only on the predefined library and other source files in the same project. But a project may also depend on other projects, either by importing them through with clauses, or by extending at most one other project. Both types of dependency can be used in the same project.

A path name denotes a project file. It can be absolute or relative. An absolute path name includes a sequence of directories, in the syntax of the host operating system, that identifies uniquely the project file in the file system. A relative path name identifies the project file, relative to the directory that contains the current project, or relative to a directory listed in the environment variables ADA_PROJECT_PATH and GPR_PROJECT_PATH. Path names are case sensitive if file names in the host operating system are case sensitive. As a special case, the directory separator can always be "/" even on Windows systems, so that project files can be made portable across architectures. The syntax of the environment variable ADA_PROJECT_PATH and GPR_PROJECT_PATH is a list of directory names separated by colons on UNIX and semicolons on Windows.

A given project name can appear only once in a context clause.

It is illegal for a project imported by a context clause to refer, directly or indirectly, to the project in which this context clause appears (the dependency graph cannot contain cycles), except when one of the with clause in the cycle is a limited with.

         with "other_project.gpr";
         project My_Project extends "extended.gpr" is
         end My_Project;

These dependencies form a directed graph, potentially cyclic when using limited with. The subprogram reflecting the extends relations is a tree.

A project's immediate sources are the source files directly defined by that project, either implicitly by residing in the project source directories, or explicitly through any of the source-related attributes. More generally, a project sources are the immediate sources of the project together with the immediate sources (unless overridden) of any project on which it depends directly or indirectly.

A project hierarchy can be created, where projects are children of other projects. The name of such a child project must be `Parent.Child`, where `Parent` is the name of the parent project. In particular, this makes all `with` clauses of the parent project automatically visible in the child project.

         project        ::= context_clause project_declaration

         context_clause ::= {with_clause}
         with_clause    ::= with path_name { , path_name } ;
         path_name      ::= string_literal

         project_declaration ::= simple_project_declaration | project_extension
         simple_project_declaration ::=
           project <project_>name is
             {declarative_item}
           end <project_>simple_name;

Next: Declarations, Previous: Project Declaration, Up: Project File Reference

#### 11.9.2 Qualified Projects

Before the reserved `project`, there may be one or two qualifiers, that is identifiers or reserved words, to qualify the project. The current list of qualifiers is:

abstract: qualifies a project with no sources. Such a
  project must either have no declaration of attributes `Source_Dirs`, `Source_Files`, `Languages` or `Source_List_File`, or one of `Source_Dirs`, `Source_Files`, or `Languages` must be declared as empty. If it extends another project, the project it extends must also be a qualified abstract project.
standard: a standard project is a non library project with sources.
  This is the default (implicit) qualifier.
aggregate: a project whose sources are aggregated from other
  project files.
aggregate library: a library whose sources are aggregated
  from other project or library project files.
library: a library project must declare both attributes
  `Library_Name` and `Library_Dir`.
configuration: a configuration project cannot be in a project tree.
  It describes compilers and other tools to `gprbuild`.

Next: Packages, Previous: Qualified Projects, Up: Project File Reference

#### 11.9.3 Declarations

Declarations introduce new entities that denote types, variables, attributes, and packages. Some declarations can only appear immediately within a project declaration. Others can appear within a project or within a package.

         declarative_item ::= simple_declarative_item
           | typed_string_declaration
           | package_declaration

         simple_declarative_item ::= variable_declaration
           | typed_variable_declaration
           | attribute_declaration
           | case_construction
           | empty_declaration

         empty_declaration ::= null ;

An empty declaration is allowed anywhere a declaration is allowed. It has no effect.

Next: Expressions, Previous: Declarations, Up: Project File Reference

#### 11.9.4 Packages

A project file may contain packages, that group attributes (typically all the attributes that are used by one of the GNAT tools).

A package with a given name may only appear once in a project file. The following packages are currently supported in project files (See see Attributes for the list of attributes that each can contain).

`Binder`
  This package specifies characteristics useful when invoking the binder either directly via the `gnat` driver or when using a builder such as `gnatmake` or `gprbuild`. See Main Subprograms.
`Builder`
  This package specifies the compilation options used when building an executable or a library for a project. Most of the options should be set in one of `Compiler`, `Binder` or `Linker` packages, but there are some general options that should be defined in this package. See Main Subprograms, and see Executable File Names in particular.
`Check`
  This package specifies the options used when calling the checking tool `gnatcheck` via the `gnat` driver. Its attribute Default_Switches has the same semantics as for the package `Builder`. The first string should always be `-rules` to specify that all the other options belong to the `-rules` section of the parameters to `gnatcheck`.
`Compiler`
  This package specifies the compilation options used by the compiler for each languages. See Tools Options in Project Files.
`Cross_Reference`
  This package specifies the options used when calling the library tool `gnatxref` via the `gnat` driver. Its attributes Default_Switches and Switches have the same semantics as for the package `Builder`.
`Eliminate`
  This package specifies the options used when calling the tool `gnatelim` via the `gnat` driver. Its attributes Default_Switches and Switches have the same semantics as for the package `Builder`.
`Finder`
  This package specifies the options used when calling the search tool `gnatfind` via the `gnat` driver. Its attributes Default_Switches and Switches have the same semantics as for the package `Builder`.
`Gnatls`
  This package the options to use when invoking `gnatls` via the `gnat` driver.
`Gnatstub`
  This package specifies the options used when calling the tool `gnatstub` via the `gnat` driver. Its attributes Default_Switches and Switches have the same semantics as for the package `Builder`.
`IDE`
  This package specifies the options used when starting an integrated development environment, for instance `GPS` or `Gnatbench`. See The Development Environments.
`Install`
  This package specifies the options used when installing a project with `gprinstall`. See Installation.
`Linker`
  This package specifies the options used by the linker. See Main Subprograms.
`Makefile`
  This package is used by the GPS plugin Makefile.py. See the documentation in that plugin (from GPS: /Tools/Plug-ins).
`Metrics`
  This package specifies the options used when calling the tool `gnatmetric` via the `gnat` driver. Its attributes Default_Switches and Switches have the same semantics as for the package `Builder`.
`Naming`
  This package specifies the naming conventions that apply to the source files in a project. In particular, these conventions are used to automatically find all source files in the source directories, or given a file name to find out its language for proper processing. See Naming Schemes.
`Pretty_Printer`
  This package specifies the options used when calling the formatting tool `gnatpp` via the `gnat` driver. Its attributes Default_Switches and Switches have the same semantics as for the package `Builder`.
`Stack`
  This package specifies the options used when calling the tool `gnatstack` via the `gnat` driver. Its attributes Default_Switches and Switches have the same semantics as for the package `Builder`.
`Synchronize`
  This package specifies the options used when calling the tool `gnatsync` via the `gnat` driver.

In its simplest form, a package may be empty:

         project Simple is
           package Builder is
           end Builder;
         end Simple;

A package may contain attribute declarations, variable declarations and case constructions, as will be described below.

When there is ambiguity between a project name and a package name, the name always designates the project. To avoid possible confusion, it is always a good idea to avoid naming a project with one of the names allowed for packages or any name that starts with `gnat`.

A package can also be defined by a renaming declaration. The new package renames a package declared in a different project file, and has the same attributes as the package it renames. The name of the renamed package must be the same as the name of the renaming package. The project must contain a package declaration with this name, and the project must appear in the context clause of the current project, or be its parent project. It is not possible to add or override attributes to the renaming project. If you need to do so, you should use an extending declaration (see below).

Packages that are renamed in other project files often come from project files that have no sources: they are just used as templates. Any modification in the template will be reflected automatically in all the project files that rename a package from the template. This is a very common way to share settings between projects.

Finally, a package can also be defined by an extending declaration. This is similar to a renaming declaration, except that it is possible to add or override attributes.

         package_declaration ::= package_spec | package_renaming | package_extension
         package_spec ::=
           package <package_>simple_name is
             {simple_declarative_item}
           end package_identifier ;
         package_renaming ::==
           package <package_>simple_name renames <project_>simple_name.package_identifier ;
         package_extension ::==
           package <package_>simple_name extends <project_>simple_name.package_identifier is
             {simple_declarative_item}
           end package_identifier ;

Next: External Values, Previous: Packages, Up: Project File Reference

#### 11.9.5 Expressions

An expression is any value that can be assigned to an attribute or a variable. It is either a literal value, or a construct requiring runtime computation by the project manager. In a project file, the computed value of an expression is either a string or a list of strings.

A string value is one of:

- A literal string, for instance `"comm/my_proj.gpr"`
- The name of a variable that evaluates to a string (see Variables)
- The name of an attribute that evaluates to a string (see Attributes)
- An external reference (see External Values)
- A concatenation of the above, as in `"prefix_" & Var`.

A list of strings is one of the following:

- A parenthesized comma-separated list of zero or more string expressions, for instance `(File_Name, "gnat.adc", File_Name & ".orig")` or `()`.
- The name of a variable that evaluates to a list of strings
- The name of an attribute that evaluates to a list of strings
- A concatenation of a list of strings and a string (as defined above), for instance `("A", "B") & "C"`
- A concatenation of two lists of strings

The following is the grammar for expressions

         string_literal ::= "{string_element}"  --  Same as Ada
         string_expression ::= string_literal
             | variable_name
             | external_value
             | attribute_reference
             | ( string_expression { & string_expression } )
         string_list  ::= ( string_expression { , string_expression } )
            | string_variable_name
            | string_attribute_reference
         term ::= string_expression | string_list
         expression ::= term { & term }     --  Concatenation

Concatenation involves strings and list of strings. As soon as a list of strings is involved, the result of the concatenation is a list of strings. The following Ada declarations show the existing operators:

           function "&" (X : String;      Y : String)      return String;
           function "&" (X : String_List; Y : String)      return String_List;
           function "&" (X : String_List; Y : String_List) return String_List;

Here are some specific examples:

            List := () & File_Name; --  One string in this list
            List2 := List & (File_Name & ".orig"); -- Two strings
            Big_List := List & Lists2;  --  Three strings
            Illegal := "gnat.adc" & List2;  --  Illegal, must start with list

Next: Typed String Declaration, Previous: Expressions, Up: Project File Reference

#### 11.9.6 External Values

An external value is an expression whose value is obtained from the command that invoked the processing of the current project file (typically a `gnatmake` or `gprbuild` command).

There are two kinds of external values, one that returns a single string, and one that returns a string list.

The syntax of a single string external value is:

         external_value ::= external ( string_literal [, string_literal] )

The first string_literal is the string to be used on the command line or in the environment to specify the external value. The second string_literal, if present, is the default to use if there is no specification for this external value either on the command line or in the environment.

Typically, the external value will either exist in the environment variables or be specified on the command line through the `-Xvbl=value` switch. If both are specified, then the command line value is used, so that a user can more easily override the value.

The function `external` always returns a string. It is an error if the value was not found in the environment and no default was specified in the call to `external`.

An external reference may be part of a string expression or of a string list expression, and can therefore appear in a variable declaration or an attribute declaration.

Most of the time, this construct is used to initialize typed variables, which are then used in case statements to control the value assigned to attributes in various scenarios. Thus such variables are often called scenario variables.

The syntax for a string list external value is:

         external_value ::= external_as_list ( string_literal , string_literal )

The first string_literal is the string to be used on the command line or in the environment to specify the external value. The second string_literal is the separator between each component of the string list.

If the external value does not exist in the environment or on the command line, the result is an empty list. This is also the case, if the separator is an empty string or if the external value is only one separator.

Any separator at the beginning or at the end of the external value is discarded. Then, if there is no separator in the external value, the result is a string list with only one string. Otherwise, any string between the beginning and the first separator, between two consecutive separators and between the last separator and the end are components of the string list.

            external_as_list ("SWITCHES", ",")

If the external value is "-O2,-g", the result is ("-O2", "-g").

If the external value is ",-O2,-g,", the result is also ("-O2", "-g").

if the external value is "-gnav", the result is ("-gnatv").

If the external value is ",,", the result is ("").

If the external value is ",", the result is (), the empty string list.

Next: Variables, Previous: External Values, Up: Project File Reference

#### 11.9.7 Typed String Declaration

A type declaration introduces a discrete set of string literals. If a string variable is declared to have this type, its value is restricted to the given set of literals. These are the only named types in project files. A string type may only be declared at the project level, not inside a package.

         typed_string_declaration ::=
           type <typed_string_>_simple_name is ( string_literal {, string_literal} );

The string literals in the list are case sensitive and must all be different. They may include any graphic characters allowed in Ada, including spaces. Here is an example of a string type declaration:

            type OS is ("NT", "nt", "Unix", "GNU/Linux", "other OS");

Variables of a string type are called typed variables; all other variables are called untyped variables. Typed variables are particularly useful in `case` constructions, to support conditional attribute declarations. (see Case Statements).

A string type may be referenced by its name if it has been declared in the same project file, or by an expanded name whose prefix is the name of the project in which it is declared.

Next: Attributes, Previous: Typed String Declaration, Up: Project File Reference

#### 11.9.8 Variables

Variables store values (strings or list of strings) and can appear as part of an expression. The declaration of a variable creates the variable and assigns the value of the expression to it. The name of the variable is available immediately after the assignment symbol, if you need to reuse its old value to compute the new value. Before the completion of its first declaration, the value of a variable defaults to the empty string ("").

A typed variable can be used as part of a case expression to compute the value, but it can only be declared once in the project file, so that all case statements see the same value for the variable. This provides more consistency and makes the project easier to understand. The syntax for its declaration is identical to the Ada syntax for an object declaration. In effect, a typed variable acts as a constant.

An untyped variable can be declared and overridden multiple times within the same project. It is declared implicitly through an Ada assignment. The first declaration establishes the kind of the variable (string or list of strings) and successive declarations must respect the initial kind. Assignments are executed in the order in which they appear, so the new value replaces the old one and any subsequent reference to the variable uses the new value.

A variable may be declared at the project file level, or within a package.

         typed_variable_declaration ::=
           <typed_variable_>simple_name : <typed_string_>name := string_expression;
         variable_declaration ::= <variable_>simple_name := expression;

Here are some examples of variable declarations:

            This_OS : OS := external ("OS"); --  a typed variable declaration
            That_OS := "GNU/Linux";          --  an untyped variable declaration

            Name      := "readme.txt";
            Save_Name := Name & ".saved";

            Empty_List := ();
            List_With_One_Element := ("-gnaty");
            List_With_Two_Elements := List_With_One_Element & "-gnatg";
            Long_List := ("main.ada", "pack1_.ada", "pack1.ada", "pack2_.ada");

A variable reference may take several forms:

- The simple variable name, for a variable in the current package (if any) or in the current project
- An expanded name, whose prefix is a context name.

A context may be one of the following:

- The name of an existing package in the current project
- The name of an imported project of the current project
- The name of an ancestor project (i.e., a project extended by the current project, either directly or indirectly)
- An expanded name whose prefix is an imported/parent project name, and whose selector is a package name in that project.

Next: Case Statements, Previous: Variables, Up: Project File Reference

#### 11.9.9 Attributes

A project (and its packages) may have attributes that define the project's properties. Some attributes have values that are strings; others have values that are string lists.

         attribute_declaration ::=
            simple_attribute_declaration | indexed_attribute_declaration
         simple_attribute_declaration ::= for attribute_designator use expression ;
         indexed_attribute_declaration ::=
           for <indexed_attribute_>simple_name ( string_literal) use expression ;
         attribute_designator ::=
           <simple_attribute_>simple_name
           | <indexed_attribute_>simple_name ( string_literal )

There are two categories of attributes: simple attributes and indexed attributes. Each simple attribute has a default value: the empty string (for string attributes) and the empty list (for string list attributes). An attribute declaration defines a new value for an attribute, and overrides the previous value. The syntax of a simple attribute declaration is similar to that of an attribute definition clause in Ada.

Some attributes are indexed. These attributes are mappings whose domain is a set of strings. They are declared one association at a time, by specifying a point in the domain and the corresponding image of the attribute. Like untyped variables and simple attributes, indexed attributes may be declared several times. Each declaration supplies a new value for the attribute, and replaces the previous setting.

Here are some examples of attribute declarations:

            --  simple attributes
            for Object_Dir use "objects";
            for Source_Dirs use ("units", "test/drivers");

            --  indexed attributes
            for Body ("main") use "Main.ada";
            for Switches ("main.ada") use ("-v", "-gnatv");
            for Switches ("main.ada") use Builder'Switches ("main.ada") & "-g";

            --  indexed attributes copy (from package Builder in project Default)
            --  The package name must always be specified, even if it is the current
            --  package.
            for Default_Switches use Default.Builder'Default_Switches;

Attributes references may be appear anywhere in expressions, and are used to retrieve the value previously assigned to the attribute. If an attribute has not been set in a given package or project, its value defaults to the empty string or the empty list.

         attribute_reference ::= attribute_prefix ' <simple_attribute>_simple_name [ (string_literal) ]
         attribute_prefix ::= project
           | <project_>simple_name
           | package_identifier
           | <project_>simple_name . package_identifier

Examples are:

           project'Object_Dir
           Naming'Dot_Replacement
           Imported_Project'Source_Dirs
           Imported_Project.Naming'Casing
           Builder'Default_Switches ("Ada")

The prefix of an attribute may be:

- `project` for an attribute of the current project
- The name of an existing package of the current project
- The name of an imported project
- The name of a parent project that is extended by the current project
- An expanded name whose prefix is imported/parent project name, and whose selector is a package name

Legal attribute names are listed below, including the package in which they must be declared. These names are case-insensitive. The semantics for the attributes is explained in great details in other sections.

The column index indicates whether the attribute is an indexed attribute, and when it is whether its index is case sensitive (sensitive) or not (insensitive), or if case sensitivity depends is the same as file names sensitivity on the system (file). The text is between brackets ([]) if the index is optional.

Attribute Name | Value | Package | Index
--- | --- | --- | ---
General attributes |  |  | see Building With Projects
Name | string | - | (Read-only, name of project)
Project_Dir | string | - | (Read-only, directory of project)
Source_Files | list | - | -
Source_Dirs | list | - | -
Source_List_File | string | - | -
Locally_Removed_Files | list | - | -
Excluded_Source_Files | list | - | -
Object_Dir | string | - | -
Exec_Dir | string | - | -
Excluded_Source_Dirs | list | - | -
Excluded_Source_Files | list | - | -
Excluded_Source_List_File | list | - | -
Inherit_Source_Path | list | - | insensitive
Languages | list | - | -
Main | list | - | -
Main_Language | string | - | -
Externally_Built | string | - | -
Roots | list | - | file
Library-related attributes |  |  | see Library Projects
Library_Dir | string | - | -
Library_Name | string | - | -
Library_Kind | string | - | -
Library_Version | string | - | -
Library_Interface | string | - | -
Library_Auto_Init | string | - | -
Library_Options | list | - | -
Leading_Library_Options | list | - | -
Library_Src_Dir | string | - | -
Library_ALI_Dir | string | - | -
Library_GCC | string | - | -
Library_Symbol_File | string | - | -
Library_Symbol_Policy | string | - | -
Library_Reference_Symbol_File | string | - | -
Interfaces | list | - | -
Naming |  |  | see Naming Schemes
Spec_Suffix | string | Naming | insensitive (language)
Body_Suffix | string | Naming | insensitive (language)
Separate_Suffix | string | Naming | -
Casing | string | Naming | -
Dot_Replacement | string | Naming | -
Spec | string | Naming | insensitive (Ada unit)
Body | string | Naming | insensitive (Ada unit)
Specification_Exceptions | list | Naming | insensitive (language)
Implementation_Exceptions | list | Naming | insensitive (language)
Building |  |  | see Switches and Project Files
Default_Switches | list | Builder, Compiler, Binder, Linker, Cross_Reference, Finder, Pretty_Printer, gnatstub, Check, Synchronize, Eliminate, Metrics, IDE | insensitive (language name)
Switches | list | Builder, Compiler, Binder, Linker, Cross_Reference, Finder, gnatls, Pretty_Printer, gnatstub, Check, Synchronize, Eliminate, Metrics, Stack | [file] (file name)
Local_Configuration_Pragmas | string | Compiler | -
Local_Config_File | string | insensitive | -
Global_Configuration_Pragmas | list | Builder | -
Global_Compilation_Switches | list | Builder | language
Executable | string | Builder | [file]
Executable_Suffix | string | Builder | -
Global_Config_File | string | Builder | insensitive (language)
IDE (used and created by GPS) |  |  |
Remote_Host | string | IDE | -
Program_Host | string | IDE | -
Communication_Protocol | string | IDE | -
Compiler_Command | string | IDE | insensitive (language)
Debugger_Command | string | IDE | -
Gnatlist | string | IDE | -
Gnat | string | IDE | -
VCS_Kind | string | IDE | -
VCS_File_Check | string | IDE | -
VCS_Log_Check | string | IDE | -
Documentation_Dir | string | IDE | -
Configuration files |  |  | See gprbuild manual
Default_Language | string | - | -
Run_Path_Option | list | - | -
Run_Path_Origin | string | - | -
Separate_Run_Path_Options | string | - | -
Toolchain_Version | string | - | insensitive
Toolchain_Description | string | - | insensitive
Object_Generated | string | - | insensitive
Objects_Linked | string | - | insensitive
Target | string | - | -
Library_Builder | string | - | -
Library_Support | string | - | -
Archive_Builder | list | - | -
Archive_Builder_Append_Option | list | - | -
Archive_Indexer | list | - | -
Archive_Suffix | string | - | -
Library_Partial_Linker | list | - | -
Shared_Library_Prefix | string | - | -
Shared_Library_Suffix | string | - | -
Symbolic_Link_Supported | string | - | -
Library_Major_Minor_Id_Supported | string | - | -
Library_Auto_Init_Supported | string | - | -
Shared_Library_Minimum_Switches | list | - | -
Library_Version_Switches | list | - | -
Library_Install_Name_Option | string | - | -
Runtime_Library_Dir | string | - | insensitive
Runtime_Source_Dir | string | - | insensitive
Driver | string | Compiler,Binder,Linker | insensitive (language)
Required_Switches | list | Compiler,Binder,Linker | insensitive (language)
Leading_Required_Switches | list | Compiler | insensitive (language)
Trailing_Required_Switches | list | Compiler | insensitive (language)
Pic_Options | list | Compiler | insensitive (language)
Path_Syntax | string | Compiler | insensitive (language)
Object_File_Suffix | string | Compiler | insensitive (language)
Object_File_Switches | list | Compiler | insensitive (language)
Multi_Unit_Switches | list | Compiler | insensitive (language)
Multi_Unit_Object_Separator | string | Compiler | insensitive (language)
Mapping_File_Switches | list | Compiler | insensitive (language)
Mapping_Spec_Suffix | string | Compiler | insensitive (language)
Mapping_body_Suffix | string | Compiler | insensitive (language)
Config_File_Switches | list | Compiler | insensitive (language)
Config_Body_File_Name | string | Compiler | insensitive (language)
Config_Body_File_Name_Index | string | Compiler | insensitive (language)
Config_Body_File_Name_Pattern | string | Compiler | insensitive (language)
Config_Spec_File_Name | string | Compiler | insensitive (language)
Config_Spec_File_Name_Index | string | Compiler | insensitive (language)
Config_Spec_File_Name_Pattern | string | Compiler | insensitive (language)
Config_File_Unique | string | Compiler | insensitive (language)
Dependency_Switches | list | Compiler | insensitive (language)
Dependency_Driver | list | Compiler | insensitive (language)
Include_Switches | list | Compiler | insensitive (language)
Include_Path | string | Compiler | insensitive (language)
Include_Path_File | string | Compiler | insensitive (language)
Prefix | string | Binder | insensitive (language)
Objects_Path | string | Binder | insensitive (language)
Objects_Path_File | string | Binder | insensitive (language)
Linker_Options | list | Linker | -
Leading_Switches | list | Linker | -
Map_File_Options | string | Linker | -
Executable_Switches | list | Linker | -
Lib_Dir_Switch | string | Linker | -
Lib_Name_Switch | string | Linker | -
Max_Command_Line_Length | string | Linker | -
Response_File_Format | string | Linker | -
Response_File_Switches | list | Linker | -

Previous: Attributes, Up: Project File Reference

#### 11.9.10 Case Statements

A case statement is used in a project file to effect conditional behavior. Through this statement, you can set the value of attributes and variables depending on the value previously assigned to a typed variable.

All choices in a choice list must be distinct. Unlike Ada, the choice lists of all alternatives do not need to include all values of the type. An `others` choice must appear last in the list of alternatives.

The syntax of a `case` construction is based on the Ada case statement (although the `null` statement for empty alternatives is optional).

The case expression must be a typed string variable, whose value is often given by an external reference (see External Values).

Each alternative starts with the reserved word `when`, either a list of literal strings separated by the `"|"` character or the reserved word `others`, and the `"=>"` token. Each literal string must belong to the string type that is the type of the case variable. After each `=>`, there are zero or more statements. The only statements allowed in a case construction are other case statements, attribute declarations and variable declarations. String type declarations and package declarations are not allowed. Variable declarations are restricted to variables that have already been declared before the case construction.

         case_statement ::=
           case <typed_variable_>name is {case_item} end case ;

         case_item ::=
           when discrete_choice_list =>
             {case_statement
               | attribute_declaration
               | variable_declaration
               | empty_declaration}

         discrete_choice_list ::= string_literal {| string_literal} | others

Here is a typical example:

         project MyProj is
            type OS_Type is ("GNU/Linux", "Unix", "NT", "VMS");
            OS : OS_Type := external ("OS", "GNU/Linux");

            package Compiler is
              case OS is
                when "GNU/Linux" | "Unix" =>
                  for Switches ("Ada") use ("-gnath");
                when "NT" =>
                  for Switches ("Ada") use ("-gnatP");
                when others =>
                  null;
              end case;
            end Compiler;
         end MyProj;

Next: The Cross-Referencing Tools gnatxref and gnatfind, Previous: GNAT Project Manager, Up: Top

## 12 Tools Supporting Project Files

Next: The GNAT Driver and Project Files, Up: Tools Supporting Project Files

### 12.1 gnatmake and Project Files

This section covers several topics related to `gnatmake` and project files: defining switches for `gnatmake` and for the tools that it invokes; specifying configuration pragmas; the use of the `Main` attribute; building and rebuilding library project files.

Next: Switches and Project Files, Up: gnatmake and Project Files

#### 12.1.1 Switches Related to Project Files

The following switches are used by GNAT tools that support project files:

`-Pproject`
  Indicates the name of a project file. This project file will be parsed with the verbosity indicated by `-vPx`, if any, and using the external references indicated by `-X` switches, if any. There may zero, one or more spaces between `-P` and project.

  There must be only one `-P` switch on the command line.

  Since the Project Manager parses the project file only after all the switches on the command line are checked, the order of the switches `-P`, `-vPx` or `-X` is not significant.

`-Xname=value`
  Indicates that external variable name has the value value. The Project Manager will use this value for occurrences of `external(name)` when parsing the project file.

  If name or value includes a space, then name=value should be put between quotes.

                  -XOS=NT
                  -X"user=John Doe"

  Several `-X` switches can be used simultaneously. If several `-X` switches specify the same name, only the last one is used.

  An external variable specified with a `-X` switch takes precedence over the value of the same name in the environment.

`-vPx`
  Indicates the verbosity of the parsing of GNAT project files.

  `-vP0` means Default; `-vP1` means Medium; `-vP2` means High.

  The default is Default: no output for syntactically correct project files. If several `-vPx` switches are present, only the last one is used.

`-aP<dir>`
  Add directory <dir> at the beginning of the project search path, in order, after the current working directory.
`-eL`
  Follow all symbolic links when processing project files.
`--subdirs=<subdir>`
  This switch is recognized by `gnatmake` and `gnatclean`. It indicate that the real directories (except the source directories) are the subdirectories <subdir> of the directories specified in the project files. This applies in particular to object directories, library directories and exec directories. If the subdirectories do not exist, they are created automatically.

Next: Specifying Configuration Pragmas, Previous: Switches Related to Project Files, Up: gnatmake and Project Files

#### 12.1.2 Switches and Project Files

For each of the packages `Builder`, `Compiler`, `Binder`, and `Linker`, you can specify a `Default_Switches` attribute, a `Switches` attribute, or both; as their names imply, these switch-related attributes affect the switches that are used for each of these GNAT components when `gnatmake` is invoked. As will be explained below, these component-specific switches precede the switches provided on the `gnatmake` command line.

The `Default_Switches` attribute is an attribute indexed by language name (case insensitive) whose value is a string list. For example:

         package Compiler is
           for Default_Switches ("Ada")
               use ("-gnaty",
                    "-v");
         end Compiler;

The `Switches` attribute is indexed on a file name (which may or may not be case sensitive, depending on the operating system) whose value is a string list. For example:

         package Builder is
            for Switches ("main1.adb")
                use ("-O2");
            for Switches ("main2.adb")
                use ("-g");
         end Builder;

For the `Builder` package, the file names must designate source files for main subprograms. For the `Binder` and `Linker` packages, the file names must designate `ALI` or source files for main subprograms. In each case just the file name without an explicit extension is acceptable.

For each tool used in a program build (`gnatmake`, the compiler, the binder, and the linker), the corresponding package contributes a set of switches for each file on which the tool is invoked, based on the switch-related attributes defined in the package. In particular, the switches that each of these packages contributes for a given file f comprise:

- the value of attribute `Switches (`f`)`, if it is specified in the package for the given file,
- otherwise, the value of `Default_Switches ("Ada")`, if it is specified in the package.

If neither of these attributes is defined in the package, then the package does not contribute any switches for the given file.

When `gnatmake` is invoked on a file, the switches comprise two sets, in the following order: those contributed for the file by the `Builder` package; and the switches passed on the command line.

When `gnatmake` invokes a tool (compiler, binder, linker) on a file, the switches passed to the tool comprise three sets, in the following order:

1. the applicable switches contributed for the file by the `Builder` package in the project file supplied on the command line;
2. those contributed for the file by the package (in the relevant project file – see below) corresponding to the tool; and
3. the applicable switches passed on the command line.

The term applicable switches reflects the fact that `gnatmake` switches may or may not be passed to individual tools, depending on the individual switch.

`gnatmake` may invoke the compiler on source files from different projects. The Project Manager will use the appropriate project file to determine the `Compiler` package for each source file being compiled. Likewise for the `Binder` and `Linker` packages.

As an example, consider the following package in a project file:

         project Proj1 is
            package Compiler is
               for Default_Switches ("Ada")
                   use ("-g");
               for Switches ("a.adb")
                   use ("-O1");
               for Switches ("b.adb")
                   use ("-O2",
                        "-gnaty");
            end Compiler;
         end Proj1;

If `gnatmake` is invoked with this project file, and it needs to compile, say, the files `a.adb`, `b.adb`, and `c.adb`, then `a.adb` will be compiled with the switch `-O1`, `b.adb` with switches `-O2` and `-gnaty`, and `c.adb` with `-g`.

The following example illustrates the ordering of the switches contributed by different packages:

         project Proj2 is
            package Builder is
               for Switches ("main.adb")
                   use ("-g",
                        "-O1",
                        "-f");
            end Builder;

            package Compiler is
               for Switches ("main.adb")
                   use ("-O2");
            end Compiler;
         end Proj2;

If you issue the command:

             gnatmake -Pproj2 -O0 main

then the compiler will be invoked on `main.adb` with the following sequence of switches

            -g -O1 -O2 -O0

with the last `-O` switch having precedence over the earlier ones; several other switches (such as `-c`) are added implicitly.

The switches `-g` and `-O1` are contributed by package `Builder`, `-O2` is contributed by the package `Compiler` and `-O0` comes from the command line.

The `-g` switch will also be passed in the invocation of `Gnatlink.`

A final example illustrates switch contributions from packages in different project files:

         project Proj3 is
            for Source_Files use ("pack.ads", "pack.adb");
            package Compiler is
               for Default_Switches ("Ada")
                   use ("-gnata");
            end Compiler;
         end Proj3;

         with "Proj3";
         project Proj4 is
            for Source_Files use ("foo_main.adb", "bar_main.adb");
            package Builder is
               for Switches ("foo_main.adb")
                   use ("-s",
                        "-g");
            end Builder;
         end Proj4;

         -- Ada source file:
         with Pack;
         procedure Foo_Main is
            ...
         end Foo_Main;

If the command is

         gnatmake -PProj4 foo_main.adb -cargs -gnato

then the switches passed to the compiler for `foo_main.adb` are `-g` (contributed by the package `Proj4.Builder`) and `-gnato` (passed on the command line). When the imported package `Pack` is compiled, the switches used are `-g` from `Proj4.Builder`, `-gnata` (contributed from package `Proj3.Compiler`, and `-gnato` from the command line.

When using `gnatmake` with project files, some switches or arguments may be expressed as relative paths. As the working directory where compilation occurs may change, these relative paths are converted to absolute paths. For the switches found in a project file, the relative paths are relative to the project file directory, for the switches on the command line, they are relative to the directory where `gnatmake` is invoked. The switches for which this occurs are: -I, -A, -L, -aO, -aL, -aI, as well as all arguments that are not switches (arguments to switch -o, object files specified in package `Linker` or after -largs on the command line). The exception to this rule is the switch –RTS= for which a relative path argument is never converted.

Next: Project Files and Main Subprograms, Previous: Switches and Project Files, Up: gnatmake and Project Files

#### 12.1.3 Specifying Configuration Pragmas

When using `gnatmake` with project files, if there exists a file `gnat.adc` that contains configuration pragmas, this file will be ignored.

Configuration pragmas can be defined by means of the following attributes in project files: `Global_Configuration_Pragmas` in package `Builder` and `Local_Configuration_Pragmas` in package `Compiler`.

Both these attributes are single string attributes. Their values is the path name of a file containing configuration pragmas. If a path name is relative, then it is relative to the project directory of the project file where the attribute is defined.

When compiling a source, the configuration pragmas used are, in order, those listed in the file designated by attribute `Global_Configuration_Pragmas` in package `Builder` of the main project file, if it is specified, and those listed in the file designated by attribute `Local_Configuration_Pragmas` in package `Compiler` of the project file of the source, if it exists.

Next: Library Project Files, Previous: Specifying Configuration Pragmas, Up: gnatmake and Project Files

#### 12.1.4 Project Files and Main Subprograms

When using a project file, you can invoke `gnatmake` with one or several main subprograms, by specifying their source files on the command line.

             gnatmake -Pprj main1.adb main2.adb main3.adb

Each of these needs to be a source file of the same project, except when the switch -u is used.

When -u is not used, all the mains need to be sources of the same project, one of the project in the tree rooted at the project specified on the command line. The package `Builder` of this common project, the "main project" is the one that is considered by `gnatmake`.

When -u is used, the specified source files may be in projects imported directly or indirectly by the project specified on the command line. Note that if such a source file is not part of the project specified on the command line, the switches found in package `Builder` of the project specified on the command line, if any, that are transmitted to the compiler will still be used, not those found in the project file of the source file.

When using a project file, you can also invoke `gnatmake` without explicitly specifying any main, and the effect depends on whether you have defined the `Main` attribute. This attribute has a string list value, where each element in the list is the name of a source file (the file extension is optional) that contains a unit that can be a main subprogram.

If the `Main` attribute is defined in a project file as a non-empty string list and the switch `-u` is not used on the command line, then invoking `gnatmake` with this project file but without any main on the command line is equivalent to invoking `gnatmake` with all the file names in the `Main` attribute on the command line.

Example:

            project Prj is
               for Main use ("main1.adb", "main2.adb", "main3.adb");
            end Prj;

With this project file, `"gnatmake -Pprj"` is equivalent to `"gnatmake -Pprj main1.adb main2.adb main3.adb"`.

When the project attribute `Main` is not specified, or is specified as an empty string list, or when the switch `-u` is used on the command line, then invoking `gnatmake` with no main on the command line will result in all immediate sources of the project file being checked, and potentially recompiled. Depending on the presence of the switch `-u`, sources from other project files on which the immediate sources of the main project file depend are also checked and potentially recompiled. In other words, the `-u` switch is applied to all of the immediate sources of the main project file.

When no main is specified on the command line and attribute `Main` exists and includes several mains, or when several mains are specified on the command line, the default switches in package `Builder` will be used for all mains, even if there are specific switches specified for one or several mains.

But the switches from package `Binder` or `Linker` will be the specific switches for each main, if they are specified.

Previous: Project Files and Main Subprograms, Up: gnatmake and Project Files

#### 12.1.5 Library Project Files

When `gnatmake` is invoked with a main project file that is a library project file, it is not allowed to specify one or more mains on the command line.

When a library project file is specified, switches -b and -l have special meanings.

- -b is only allowed for stand-alone libraries. It indicates to `gnatmake` that `gnatbind` should be invoked for the library.
- -l may be used for all library projects. It indicates to `gnatmake` that the binder generated file should be compiled (in the case of a stand-alone library) and that the library should be built.

Next: The Development Environments, Previous: gnatmake and Project Files, Up: Tools Supporting Project Files

### 12.2 The GNAT Driver and Project Files

A number of GNAT tools, other than `gnatmake` can benefit from project files: (`gnatbind`, `gnatcheck`, `gnatclean`, `gnatelim`, `gnatfind`, `gnatlink`, `gnatls`, `gnatmetric`, `gnatpp`, `gnatstub`, and `gnatxref`). However, none of these tools can be invoked directly with a project file switch (`-P`). They must be invoked through the `gnat` driver.

The `gnat` driver is a wrapper that accepts a number of commands and calls the corresponding tool. It was designed initially for VMS platforms (to convert VMS qualifiers to Unix-style switches), but it is now available on all GNAT platforms.

On non-VMS platforms, the `gnat` driver accepts the following commands (case insensitive):

- BIND to invoke `gnatbind`
- CHOP to invoke `gnatchop`
- CLEAN to invoke `gnatclean`
- COMP or COMPILE to invoke the compiler
- ELIM to invoke `gnatelim`
- FIND to invoke `gnatfind`
- KR or KRUNCH to invoke `gnatkr`
- LINK to invoke `gnatlink`
- LS or LIST to invoke `gnatls`
- MAKE to invoke `gnatmake`
- NAME to invoke `gnatname`
- PREP or PREPROCESS to invoke `gnatprep`
- PP or PRETTY to invoke `gnatpp`
- METRIC to invoke `gnatmetric`
- STUB to invoke `gnatstub`
- XREF to invoke `gnatxref`

(note that the compiler is invoked using the command `gnatmake -f -u -c`).

On non-VMS platforms, between `gnat` and the command, two special switches may be used:

- `-v` to display the invocation of the tool.
- `-dn` to prevent the `gnat` driver from removing the temporary files it has created. These temporary files are configuration files and temporary file list files.

The command may be followed by switches and arguments for the invoked tool.

           gnat bind -C main.ali
           gnat ls -a main
           gnat chop foo.txt

Switches may also be put in text files, one switch per line, and the text files may be specified with their path name preceded by '@'.

            gnat bind @args.txt main.ali

In addition, for commands BIND, COMP or COMPILE, FIND, ELIM, LS or LIST, LINK, METRIC, PP or PRETTY, STUB and XREF, the project file related switches (`-P`, `-X` and `-vPx`) may be used in addition to the switches of the invoking tool.

When GNAT PP or GNAT PRETTY is used with a project file, but with no source specified on the command line, it invokes `gnatpp` with all the immediate sources of the specified project file.

When GNAT METRIC is used with a project file, but with no source specified on the command line, it invokes `gnatmetric` with all the immediate sources of the specified project file and with `-d` with the parameter pointing to the object directory of the project.

In addition, when GNAT PP, GNAT PRETTY or GNAT METRIC is used with a project file, no source is specified on the command line and switch -U is specified on the command line, then the underlying tool (gnatpp or gnatmetric) is invoked for all sources of all projects, not only for the immediate sources of the main project. (-U stands for Universal or Union of the project files of the project tree)

For each of the following commands, there is optionally a corresponding package in the main project.

- package `Binder` for command BIND (invoking `gnatbind`)
- package `Check` for command CHECK (invoking `gnatcheck`)
- package `Compiler` for command COMP or COMPILE (invoking the compiler)
- package `Cross_Reference` for command XREF (invoking `gnatxref`)
- package `Eliminate` for command ELIM (invoking `gnatelim`)
- package `Finder` for command FIND (invoking `gnatfind`)
- package `Gnatls` for command LS or LIST (invoking `gnatls`)
- package `Gnatstub` for command STUB (invoking `gnatstub`)
- package `Linker` for command LINK (invoking `gnatlink`)
- package `Check` for command CHECK (invoking `gnatcheck`)
- package `Metrics` for command METRIC (invoking `gnatmetric`)
- package `Pretty_Printer` for command PP or PRETTY (invoking `gnatpp`)

Package `Gnatls` has a unique attribute `Switches`, a simple variable with a string list value. It contains switches for the invocation of `gnatls`.

         project Proj1 is
            package gnatls is
               for Switches
                   use ("-a",
                        "-v");
            end gnatls;
         end Proj1;

All other packages have two attribute `Switches` and `Default_Switches`.

`Switches` is an indexed attribute, indexed by the source file name, that has a string list value: the switches to be used when the tool corresponding to the package is invoked for the specific source file.

`Default_Switches` is an attribute, indexed by the programming language that has a string list value. `Default_Switches ("Ada")` contains the switches for the invocation of the tool corresponding to the package, except if a specific `Switches` attribute is specified for the source file.

         project Proj is

            for Source_Dirs use ("**");

            package gnatls is
               for Switches use
                   ("-a",
                    "-v");
            end gnatls;

            package Compiler is
               for Default_Switches ("Ada")
                   use ("-gnatv",
                        "-gnatwa");
            end Binder;

            package Binder is
               for Default_Switches ("Ada")
                   use ("-C",
                        "-e");
            end Binder;

            package Linker is
               for Default_Switches ("Ada")
                   use ("-C");
               for Switches ("main.adb")
                   use ("-C",
                        "-v",
                        "-v");
            end Linker;

            package Finder is
               for Default_Switches ("Ada")
                    use ("-a",
                         "-f");
            end Finder;

            package Cross_Reference is
               for Default_Switches ("Ada")
                   use ("-a",
                        "-f",
                        "-d",
                        "-u");
            end Cross_Reference;
         end Proj;

With the above project file, commands such as

            gnat comp -Pproj main
            gnat ls -Pproj main
            gnat xref -Pproj main
            gnat bind -Pproj main.ali
            gnat link -Pproj main.ali

will set up the environment properly and invoke the tool with the switches found in the package corresponding to the tool: `Default_Switches ("Ada")` for all tools, except `Switches ("main.adb")` for `gnatlink`. It is also possible to invoke some of the tools, (`gnatcheck`, `gnatmetric`, and `gnatpp`) on a set of project units thanks to the combination of the switches `-P`, `-U` and possibly the main unit when one is interested in its closure. For instance,

         gnat metric -Pproj

will compute the metrics for all the immediate units of project `proj`.

         gnat metric -Pproj -U

will compute the metrics for all the units of the closure of projects rooted at `proj`.

         gnat metric -Pproj -U main_unit

will compute the metrics for the closure of units rooted at `main_unit`. This last possibility relies implicitly on `gnatbind`'s option `-R`. But if the argument files for the tool invoked by the `gnat` driver are explicitly specified either directly or through the tool `-files` option, then the tool is called only for these explicitly specified files.

Previous: The GNAT Driver and Project Files, Up: Tools Supporting Project Files

### 12.3 The Development Environments

See the appropriate manuals for more details. These environments will store a number of settings in the project itself, when they are meant to be shared by the whole team working on the project. Here are the attributes defined in the package IDE in projects.

`Remote_Host`
  This is a simple attribute. Its value is a string that designates the remote host in a cross-compilation environment, to be used for remote compilation and debugging. This field should not be specified when running on the local machine.
`Program_Host`
  This is a simple attribute. Its value is a string that specifies the name of IP address of the embedded target in a cross-compilation environment, on which the program should execute.
`Communication_Protocol`
  This is a simple string attribute. Its value is the name of the protocol to use to communicate with the target in a cross-compilation environment, e.g. `"wtx"` or `"vxworks"`.
`Compiler_Command`
  This is an associative array attribute, whose domain is a language name. Its value is string that denotes the command to be used to invoke the compiler. The value of `Compiler_Command ("Ada")` is expected to be compatible with `gnatmake`, in particular in the handling of switches.
`Debugger_Command`
  This is simple attribute, Its value is a string that specifies the name of the debugger to be used, such as gdb, powerpc-wrs-vxworks-gdb or gdb-4.
`Default_Switches`
  This is an associative array attribute. Its indexes are the name of the external tools that the GNAT Programming System (GPS) is supporting. Its value is a list of switches to use when invoking that tool.
`Gnatlist`
  This is a simple attribute. Its value is a string that specifies the name of the `gnatls` utility to be used to retrieve information about the predefined path; e.g., `"gnatls"`, `"powerpc-wrs-vxworks-gnatls"`.
`VCS_Kind`
  This is a simple attribute. Its value is a string used to specify the Version Control System (VCS) to be used for this project, e.g. CVS, RCS ClearCase or Perforce.
`Gnat`
  This is a simple attribute. Its value is a string that specifies the name of the `gnat` utility to be used when executing various tools from GPS, in particular `"gnat pp"`, `"gnat stub"`,...
`VCS_File_Check`
  This is a simple attribute. Its value is a string that specifies the command used by the VCS to check the validity of a file, either when the user explicitly asks for a check, or as a sanity check before doing the check-in.
`VCS_Log_Check`
  This is a simple attribute. Its value is a string that specifies the command used by the VCS to check the validity of a log file.
`VCS_Repository_Root`
  The VCS repository root path. This is used to create tags or branches of the repository. For subversion the value should be the `URL` as specified to check-out the working copy of the repository.
`VCS_Patch_Root`
  The local root directory to use for building patch file. All patch chunks will be relative to this path. The root project directory is used if this value is not defined.

Next: The GNAT Pretty-Printer gnatpp, Previous: Tools Supporting Project Files, Up: Top

## 13 The Cross-Referencing Tools `gnatxref` and `gnatfind`

The compiler generates cross-referencing information (unless you set the ‘`-gnatx`’ switch), which are saved in the `.ali` files. This information indicates where in the source each entity is declared and referenced. Note that entities in package Standard are not included, but entities in all other predefined units are included in the output.

Before using any of these two tools, you need to compile successfully your application, so that GNAT gets a chance to generate the cross-referencing information.

The two tools `gnatxref` and `gnatfind` take advantage of this information to provide the user with the capability to easily locate the declaration and references to an entity. These tools are quite similar, the difference being that `gnatfind` is intended for locating definitions and/or references to a specified entity or entities, whereas `gnatxref` is oriented to generating a full report of all cross-references.

To use these tools, you must not compile your application using the `-gnatx` switch on the `gnatmake` command line (see The GNAT Make Program gnatmake). Otherwise, cross-referencing information will not be generated.

Note: to invoke `gnatxref` or `gnatfind` with a project file, use the `gnat` driver (see The GNAT Driver and Project Files).

Next: Switches for gnatfind, Up: The Cross-Referencing Tools gnatxref and gnatfind

### 13.1 `gnatxref` Switches

The command invocation for `gnatxref` is:

         $ gnatxref [switches] sourcefile1 [sourcefile2 ...]

where

sourcefile1
sourcefile2
  identifies the source files for which a report is to be generated. The “with”ed units will be processed too. You must provide at least one file.

  These file names are considered to be regular expressions, so for instance specifying `source*.adb` is the same as giving every file in the current directory whose name starts with `source` and whose extension is `adb`.

  You shouldn't specify any directory name, just base names. `gnatxref` and `gnatfind` will be able to locate these files by themselves using the source path. If you specify directories, no result is produced.

The switches can be:

`--version`
  Display Copyright and version, then exit disregarding all other options.
`--help`
  If `--version` was not used, display usage, then exit disregarding all other options.
`-a`
  If this switch is present, `gnatfind` and `gnatxref` will parse the read-only files found in the library search path. Otherwise, these files will be ignored. This option can be used to protect Gnat sources or your own libraries from being parsed, thus making `gnatfind` and `gnatxref` much faster, and their output much smaller. Read-only here refers to access or permissions status in the file system for the current user.
`-aIDIR`
  When looking for source files also look in directory DIR. The order in which source file search is undertaken is the same as for `gnatmake`.
`-aODIR`
  When searching for library and object files, look in directory DIR. The order in which library files are searched is the same as for `gnatmake`.
`-nostdinc`
  Do not look for sources in the system default directory.
`-nostdlib`
  Do not look for library files in the system default directory.
`--ext=extension`
  Specify an alternate ali file extension. The default is `ali` and other extensions (e.g. `sli` for SPARK library files) may be specified via this switch. Note that if this switch overrides the default, which means that only the new extension will be considered.
`--RTS=rts-path`
  Specifies the default location of the runtime library. Same meaning as the equivalent `gnatmake` flag (see Switches for gnatmake).
`-d`
  If this switch is set `gnatxref` will output the parent type reference for each matching derived types.
`-f`
  If this switch is set, the output file names will be preceded by their directory (if the file was found in the search path). If this switch is not set, the directory will not be printed.
`-g`
  If this switch is set, information is output only for library-level entities, ignoring local entities. The use of this switch may accelerate `gnatfind` and `gnatxref`.
`-IDIR`
  Equivalent to ‘`-aODIR -aIDIR`’.
`-pFILE`
  Specify a project file to use See GNAT Project Manager. If you need to use the `.gpr` project files, you should use gnatxref through the GNAT driver (`gnat xref -Pproject`).

  By default, `gnatxref` and `gnatfind` will try to locate a project file in the current directory.

  If a project file is either specified or found by the tools, then the content of the source directory and object directory lines are added as if they had been specified respectively by ‘`-aI`’ and ‘`-aO`’.

`-u`
  Output only unused symbols. This may be really useful if you give your main compilation unit on the command line, as `gnatxref` will then display every unused entity and 'with'ed package.
`-v`
  Instead of producing the default output, `gnatxref` will generate a `tags` file that can be used by vi. For examples how to use this feature, see Examples of gnatxref Usage. The tags file is output to the standard output, thus you will have to redirect it to a file.

All these switches may be in any order on the command line, and may even appear after the file names. They need not be separated by spaces, thus you can say ‘`gnatxref -ag`’ instead of ‘`gnatxref -a -g`’.

Next: Project Files for gnatxref and gnatfind, Previous: Switches for gnatxref, Up: The Cross-Referencing Tools gnatxref and gnatfind

### 13.2 `gnatfind` Switches

The command line for `gnatfind` is:

         $ gnatfind [switches] pattern[:sourcefile[:line[:column]]]
               [file1 file2 ...]

where

pattern
  An entity will be output only if it matches the regular expression found in pattern, see Regular Expressions in gnatfind and gnatxref.

  Omitting the pattern is equivalent to specifying ‘`*`’, which will match any entity. Note that if you do not provide a pattern, you have to provide both a sourcefile and a line.

  Entity names are given in Latin-1, with uppercase/lowercase equivalence for matching purposes. At the current time there is no support for 8-bit codes other than Latin-1, or for wide characters in identifiers.

sourcefile
  `gnatfind` will look for references, bodies or declarations of symbols referenced in `sourcefile`, at line line and column column. See Examples of gnatfind Usage for syntax examples.
line
  is a decimal integer identifying the line number containing the reference to the entity (or entities) to be located.
column
  is a decimal integer identifying the exact location on the line of the first character of the identifier for the entity reference. Columns are numbered from 1.
file1 file2 ...
  The search will be restricted to these source files. If none are given, then the search will be done for every library file in the search path. These file must appear only after the pattern or sourcefile.

  These file names are considered to be regular expressions, so for instance specifying `source*.adb` is the same as giving every file in the current directory whose name starts with `source` and whose extension is `adb`.

  The location of the spec of the entity will always be displayed, even if it isn't in one of `file1`, `file2`,... The occurrences of the entity in the separate units of the ones given on the command line will also be displayed.

  Note that if you specify at least one file in this part, `gnatfind` may sometimes not be able to find the body of the subprograms.

At least one of 'sourcefile' or 'pattern' has to be present on the command line.

The following switches are available:

Display Copyright and version, then exit disregarding all other options.

`--help`
  If `--version` was not used, display usage, then exit disregarding all other options.
`-a`
  If this switch is present, `gnatfind` and `gnatxref` will parse the read-only files found in the library search path. Otherwise, these files will be ignored. This option can be used to protect Gnat sources or your own libraries from being parsed, thus making `gnatfind` and `gnatxref` much faster, and their output much smaller. Read-only here refers to access or permission status in the file system for the current user.
`-aIDIR`
  When looking for source files also look in directory DIR. The order in which source file search is undertaken is the same as for `gnatmake`.
`-aODIR`
  When searching for library and object files, look in directory DIR. The order in which library files are searched is the same as for `gnatmake`.
`-nostdinc`
  Do not look for sources in the system default directory.
`-nostdlib`
  Do not look for library files in the system default directory.
`--ext=extension`
  Specify an alternate ali file extension. The default is `ali` and other extensions (e.g. `sli` for SPARK library files) may be specified via this switch. Note that if this switch overrides the default, which means that only the new extension will be considered.
`--RTS=rts-path`
  Specifies the default location of the runtime library. Same meaning as the equivalent `gnatmake` flag (see Switches for gnatmake).
`-d`
  If this switch is set, then `gnatfind` will output the parent type reference for each matching derived types.
`-e`
  By default, `gnatfind` accept the simple regular expression set for ‘`pattern`’. If this switch is set, then the pattern will be considered as full Unix-style regular expression.
`-f`
  If this switch is set, the output file names will be preceded by their directory (if the file was found in the search path). If this switch is not set, the directory will not be printed.
`-g`
  If this switch is set, information is output only for library-level entities, ignoring local entities. The use of this switch may accelerate `gnatfind` and `gnatxref`.
`-IDIR`
  Equivalent to ‘`-aODIR -aIDIR`’.
`-pFILE`
  Specify a project file (see GNAT Project Manager) to use. By default, `gnatxref` and `gnatfind` will try to locate a project file in the current directory.

  If a project file is either specified or found by the tools, then the content of the source directory and object directory lines are added as if they had been specified respectively by ‘`-aI`’ and ‘`-aO`’.

`-r`
  By default, `gnatfind` will output only the information about the declaration, body or type completion of the entities. If this switch is set, the `gnatfind` will locate every reference to the entities in the files specified on the command line (or in every file in the search path if no file is given on the command line).
`-s`
  If this switch is set, then `gnatfind` will output the content of the Ada source file lines were the entity was found.
`-t`
  If this switch is set, then `gnatfind` will output the type hierarchy for the specified type. It act like -d option but recursively from parent type to parent type. When this switch is set it is not possible to specify more than one file.

All these switches may be in any order on the command line, and may even appear after the file names. They need not be separated by spaces, thus you can say ‘`gnatxref -ag`’ instead of ‘`gnatxref -a -g`’.

As stated previously, gnatfind will search in every directory in the search path. You can force it to look only in the current directory if you specify `*` at the end of the command line.

Next: Regular Expressions in gnatfind and gnatxref, Previous: Switches for gnatfind, Up: The Cross-Referencing Tools gnatxref and gnatfind

### 13.3 Project Files for `gnatxref` and `gnatfind`

Project files allow a programmer to specify how to compile its application, where to find sources, etc. These files are used primarily by GPS, but they can also be used by the two tools `gnatxref` and `gnatfind`.

A project file name must end with `.gpr`. If a single one is present in the current directory, then `gnatxref` and `gnatfind` will extract the information from it. If multiple project files are found, none of them is read, and you have to use the ‘`-p`’ switch to specify the one you want to use.

The following lines can be included, even though most of them have default values which can be used in most cases. The lines can be entered in any order in the file. Except for `src_dir` and `obj_dir`, you can only have one instance of each line. If you have multiple instances, only the last one is taken into account.

`src_dir=DIR`
  [default: `"./"`] specifies a directory where to look for source files. Multiple `src_dir` lines can be specified and they will be searched in the order they are specified.
`obj_dir=DIR`
  [default: `"./"`] specifies a directory where to look for object and library files. Multiple `obj_dir` lines can be specified, and they will be searched in the order they are specified
`comp_opt=SWITCHES`
  [default: `""`] creates a variable which can be referred to subsequently by using the `${comp_opt}` notation. This is intended to store the default switches given to `gnatmake` and `gcc`.
`bind_opt=SWITCHES`
  [default: `""`] creates a variable which can be referred to subsequently by using the ‘`${bind_opt}`’ notation. This is intended to store the default switches given to `gnatbind`.
`link_opt=SWITCHES`
  [default: `""`] creates a variable which can be referred to subsequently by using the ‘`${link_opt}`’ notation. This is intended to store the default switches given to `gnatlink`.
`main=EXECUTABLE`
  [default: `""`] specifies the name of the executable for the application. This variable can be referred to in the following lines by using the ‘`${main}`’ notation.
`comp_cmd=COMMAND`
  [default: `"gcc -c -I${src_dir} -g -gnatq"`] specifies the command used to compile a single file in the application.
`make_cmd=COMMAND`
  [default: `"gnatmake ${main} -aI${src_dir} -aO${obj_dir} -g -gnatq -cargs ${comp_opt} -bargs ${bind_opt} -largs ${link_opt}"`] specifies the command used to recompile the whole application.
`run_cmd=COMMAND`
  [default: `"${main}"`] specifies the command used to run the application.
`debug_cmd=COMMAND`
  [default: `"gdb ${main}"`] specifies the command used to debug the application

`gnatxref` and `gnatfind` only take into account the `src_dir` and `obj_dir` lines, and ignore the others.

Next: Examples of gnatxref Usage, Previous: Project Files for gnatxref and gnatfind, Up: The Cross-Referencing Tools gnatxref and gnatfind

### 13.4 Regular Expressions in `gnatfind` and `gnatxref`

As specified in the section about `gnatfind`, the pattern can be a regular expression. Actually, there are to set of regular expressions which are recognized by the program:

`globbing patterns`
  These are the most usual regular expression. They are the same that you generally used in a Unix shell command line, or in a DOS session.

  Here is a more formal grammar:

                regexp ::= term
                term   ::= elmt            -- matches elmt
                term   ::= elmt elmt       -- concatenation (elmt then elmt)
                term   ::= *               -- any string of 0 or more characters
                term   ::= ?               -- matches any character
                term   ::= [char {char}]   -- matches any character listed
                term   ::= [char - char]   -- matches any character in range

`full regular expression`
  The second set of regular expressions is much more powerful. This is the type of regular expressions recognized by utilities such a `grep`.

  The following is the form of a regular expression, expressed in Ada reference manual style BNF is as follows

                regexp ::= term {| term}   -- alternation (term or term ...)

                term ::= item {item}       -- concatenation (item then item)

                item ::= elmt              -- match elmt
                item ::= elmt *            -- zero or more elmt's
                item ::= elmt +            -- one or more elmt's
                item ::= elmt ?            -- matches elmt or nothing
                elmt ::= nschar            -- matches given character
                elmt ::= [nschar {nschar}]   -- matches any character listed
                elmt ::= [^ nschar {nschar}] -- matches any character not listed
                elmt ::= [char - char]     -- matches chars in given range
                elmt ::= \ char            -- matches given character
                elmt ::= .                 -- matches any single character
                elmt ::= ( regexp )        -- parens used for grouping

                char ::= any character, including special characters
                nschar ::= any character except ()[].*+?^

  Following are a few examples:

  ‘`abcde|fghi`’
    will match any of the two strings ‘`abcde`’ and ‘`fghi`’,
  ‘`abc*d`’
    will match any string like ‘`abd`’, ‘`abcd`’, ‘`abccd`’, ‘`abcccd`’, and so on,
  ‘`[a-z]+`’
    will match any string which has only lowercase characters in it (and at least one character.

Next: Examples of gnatfind Usage, Previous: Regular Expressions in gnatfind and gnatxref, Up: The Cross-Referencing Tools gnatxref and gnatfind

### 13.5 Examples of `gnatxref` Usage

#### 13.5.1 General Usage

For the following examples, we will consider the following units:

         main.ads:
         1: with Bar;
         2: package Main is
         3:     procedure Foo (B : in Integer);
         4:     C : Integer;
         5: private
         6:     D : Integer;
         7: end Main;

         main.adb:
         1: package body Main is
         2:     procedure Foo (B : in Integer) is
         3:     begin
         4:        C := B;
         5:        D := B;
         6:        Bar.Print (B);
         7:        Bar.Print (C);
         8:     end Foo;
         9: end Main;

         bar.ads:
         1: package Bar is
         2:     procedure Print (B : Integer);
         3: end bar;

The first thing to do is to recompile your application (for instance, in that case just by doing a ‘`gnatmake main`’, so that GNAT generates the cross-referencing information. You can then issue any of the following commands:
`gnatxref main.adb`
  `gnatxref` generates cross-reference information for main.adb and every unit 'with'ed by main.adb.

  The output would be:

                B                                                      Type: Integer
                  Decl: bar.ads           2:22
                B                                                      Type: Integer
                  Decl: main.ads          3:20
                  Body: main.adb          2:20
                  Ref:  main.adb          4:13     5:13     6:19
                Bar                                                    Type: Unit
                  Decl: bar.ads           1:9
                  Ref:  main.adb          6:8      7:8
                       main.ads           1:6
                C                                                      Type: Integer
                  Decl: main.ads          4:5
                  Modi: main.adb          4:8
                  Ref:  main.adb          7:19
                D                                                      Type: Integer
                  Decl: main.ads          6:5
                  Modi: main.adb          5:8
                Foo                                                    Type: Unit
                  Decl: main.ads          3:15
                  Body: main.adb          2:15
                Main                                                    Type: Unit
                  Decl: main.ads          2:9
                  Body: main.adb          1:14
                Print                                                   Type: Unit
                  Decl: bar.ads           2:15
                  Ref:  main.adb          6:12     7:12

  that is the entity `Main` is declared in main.ads, line 2, column 9, its body is in main.adb, line 1, column 14 and is not referenced any where.

  The entity `Print` is declared in bar.ads, line 2, column 15 and it is referenced in main.adb, line 6 column 12 and line 7 column 12.

`gnatxref package1.adb package2.ads`
  `gnatxref` will generates cross-reference information for package1.adb, package2.ads and any other package 'with'ed by any of these.

#### 13.5.2 Using gnatxref with vi

`gnatxref` can generate a tags file output, which can be used directly from `vi`. Note that the standard version of `vi` will not work properly with overloaded symbols. Consider using another free implementation of `vi`, such as `vim`.

         $ gnatxref -v gnatfind.adb > tags

will generate the tags file for `gnatfind` itself (if the sources are in the search path!).

From `vi`, you can then use the command ‘`:tag entity`’ (replacing entity by whatever you are looking for), and vi will display a new file with the corresponding declaration of entity.

Previous: Examples of gnatxref Usage, Up: The Cross-Referencing Tools gnatxref and gnatfind

### 13.6 Examples of `gnatfind` Usage

`gnatfind -f xyz:main.adb`
  Find declarations for all entities xyz referenced at least once in main.adb. The references are search in every library file in the search path.

  The directories will be printed as well (as the ‘`-f`’ switch is set)

  The output will look like:

                directory/main.ads:106:14: xyz <= declaration
                directory/main.adb:24:10: xyz <= body
                directory/foo.ads:45:23: xyz <= declaration

  that is to say, one of the entities xyz found in main.adb is declared at line 12 of main.ads (and its body is in main.adb), and another one is declared at line 45 of foo.ads

`gnatfind -fs xyz:main.adb`
  This is the same command as the previous one, instead `gnatfind` will display the content of the Ada source file lines.

  The output will look like:

                directory/main.ads:106:14: xyz <= declaration
                   procedure xyz;
                directory/main.adb:24:10: xyz <= body
                   procedure xyz is
                directory/foo.ads:45:23: xyz <= declaration
                   xyz : Integer;

  This can make it easier to find exactly the location your are looking for.

`gnatfind -r "*x*":main.ads:123 foo.adb`
  Find references to all entities containing an x that are referenced on line 123 of main.ads. The references will be searched only in main.ads and foo.adb.
`gnatfind main.ads:123`
  Find declarations and bodies for all entities that are referenced on line 123 of main.ads.

  This is the same as `gnatfind "*":main.adb:123`.

`gnatfind mydir/main.adb:123:45`
  Find the declaration for the entity referenced at column 45 in line 123 of file main.adb in directory mydir. Note that it is usual to omit the identifier name when the column is given, since the column position identifies a unique reference.

  The column has to be the beginning of the identifier, and should not point to any character in the middle of the identifier.

Next: The GNAT Metric Tool gnatmetric, Previous: The Cross-Referencing Tools gnatxref and gnatfind, Up: Top

## 14 The GNAT Pretty-Printer `gnatpp`

The `gnatpp` tool is an ASIS-based utility for source reformatting / pretty-printing. It takes an Ada source file as input and generates a reformatted version as output. You can specify various style directives via switches; e.g., identifier case conventions, rules of indentation, and comment layout.

To produce a reformatted file, `gnatpp` generates and uses the ASIS tree for the input source and thus requires the input to be syntactically and semantically legal. If this condition is not met, `gnatpp` will terminate with an error message; no output file will be generated.

`gnatpp` cannot process sources that contain preprocessing directives.

If the compilation unit contained in the input source depends semantically upon units located outside the current directory, you have to provide the source search path when invoking `gnatpp`, if these units are contained in files with names that do not follow the GNAT file naming rules, you have to provide the configuration file describing the corresponding naming scheme; see the description of the `gnatpp` switches below. Another possibility is to use a project file and to call `gnatpp` through the `gnat` driver (see The GNAT Driver and Project Files).

The `gnatpp` command has the form

         $ gnatpp [switches] filename [-cargs gcc_switches]

where

- switches is an optional sequence of switches defining such properties as the formatting rules, the source search path, and the destination for the output source file
- filename is the name (including the extension) of the source file to reformat; “wildcards” or several file names on the same gnatpp command are allowed. The file name may contain path information; it does not have to follow the GNAT file naming rules
- ‘`gcc_switches`’ is a list of switches for `gcc`. They will be passed on to all compiler invocations made by `gnatelim` to generate the ASIS trees. Here you can provide `-I` switches to form the source search path, use the `-gnatec` switch to set the configuration file, use the `-gnat05` switch if sources should be compiled in Ada 2005 mode etc.

Next: Formatting Rules, Up: The GNAT Pretty-Printer gnatpp

### 14.1 Switches for `gnatpp`

The following subsections describe the various switches accepted by `gnatpp`, organized by category.

You specify a switch by supplying a name and generally also a value. In many cases the values for a switch with a given name are incompatible with each other (for example the switch that controls the casing of a reserved word may have exactly one value: upper case, lower case, or mixed case) and thus exactly one such switch can be in effect for an invocation of `gnatpp`. If more than one is supplied, the last one is used. However, some values for the same switch are mutually compatible. You may supply several such switches to `gnatpp`, but then each must be specified in full, with both the name and the value. Abbreviated forms (the name appearing once, followed by each value) are not permitted. For example, to set the alignment of the assignment delimiter both in declarations and in assignment statements, you must write `-A2A3` (or `-A2 -A3`), but not `-A23`.

In most cases, it is obvious whether or not the values for a switch with a given name are compatible with each other. When the semantics might not be evident, the summaries below explicitly indicate the effect.

Next: Casing Control, Up: Switches for gnatpp

#### 14.1.1 Alignment Control

Programs can be easier to read if certain constructs are vertically aligned. By default all alignments are set ON. Through the `-A0` switch you may reset the default to OFF, and then use one or more of the other `-An` switches to activate alignment for specific constructs.

`-A0`
  Set all alignments to OFF
`-A1`
  Align `:` in declarations
`-A2`
  Align `:=` in initializations in declarations
`-A3`
  Align `:=` in assignment statements
`-A4`
  Align `=>` in associations
`-A5`
  Align `at` keywords in the component clauses in record representation clauses

The `-A` switches are mutually compatible; any combination is allowed.

Next: Construct Layout Control, Previous: Alignment Control, Up: Switches for gnatpp

#### 14.1.2 Casing Control

`gnatpp` allows you to specify the casing for reserved words, pragma names, attribute designators and identifiers. For identifiers you may define a general rule for name casing but also override this rule via a set of dictionary files.

Three types of casing are supported: lower case, upper case, and mixed case. Lower and upper case are self-explanatory (but since some letters in Latin1 and other GNAT-supported character sets exist only in lower-case form, an upper case conversion will have no effect on them.) “Mixed case” means that the first letter, and also each letter immediately following an underscore, are converted to their uppercase forms; all the other letters are converted to their lowercase forms.

`-aL`
  Attribute designators are lower case
`-aU`
  Attribute designators are upper case
`-aM`
  Attribute designators are mixed case (this is the default)

`-kL`
  Keywords (technically, these are known in Ada as reserved words) are lower case (this is the default)
`-kU`
  Keywords are upper case

`-nD`
  Name casing for defining occurrences are as they appear in the source file (this is the default)
`-nU`
  Names are in upper case
`-nL`
  Names are in lower case
`-nM`
  Names are in mixed case

`-neD`
  Enumeration literal casing for defining occurrences are as they appear in the source file. Overrides -n casing setting.
`-neU`
  Enumeration literals are in upper case. Overrides -n casing setting.
`-neL`
  Enumeration literals are in lower case. Overrides -n casing setting.
`-neM`
  Enumeration literals are in mixed case. Overrides -n casing setting.

`-neD`
  Names introduced by type and subtype declarations are always cased as they appear in the declaration in the source file. Overrides -n casing setting.
`-ntU`
  Names introduced by type and subtype declarations are always in upper case. Overrides -n casing setting.
`-ntL`
  Names introduced by type and subtype declarations are always in lower case. Overrides -n casing setting.
`-ntM`
  Names introduced by type and subtype declarations are always in mixed case. Overrides -n casing setting.
`-nnU`
  Names introduced by number declarations are always in upper case. Overrides -n casing setting.
`-nnL`
  Names introduced by number declarations are always in lower case. Overrides -n casing setting.
`-nnM`
  Names introduced by number declarations are always in mixed case. Overrides -n casing setting.

`-pL`
  Pragma names are lower case
`-pU`
  Pragma names are upper case
`-pM`
  Pragma names are mixed case (this is the default)
`-Dfile`
  Use file as a dictionary file that defines the casing for a set of specified names, thereby overriding the effect on these names by any explicit or implicit -n switch. To supply more than one dictionary file, use several `-D` switches.

  `gnatpp` implicitly uses a default dictionary file to define the casing for the Ada predefined names and the names declared in the GNAT libraries.

`-D-`
  Do not use the default dictionary file; instead, use the casing defined by a `-n` switch and any explicit dictionary file(s)

The structure of a dictionary file, and details on the conventions used in the default dictionary file, are defined in Name Casing.

The `-D-` and `-Dfile` switches are mutually compatible.

Next: General Text Layout Control, Previous: Casing Control, Up: Switches for gnatpp

#### 14.1.3 Construct Layout Control

This group of `gnatpp` switches controls the layout of comments and complex syntactic constructs. See Formatting Comments for details on their effect.

`-c0`
  All the comments remain unchanged
`-c1`
  GNAT-style comment line indentation (this is the default).
`-c2`
  Reference-manual comment line indentation.
`-c3`
  GNAT-style comment beginning
`-c4`
  Reformat comment blocks
`-c5`
  Keep unchanged special form comments

`-l1`
  GNAT-style layout (this is the default)
`-l2`
  Compact layout
`-l3`
  Uncompact layout

`-N`
  All the VT characters are removed from the comment text. All the HT characters are expanded with the sequences of space characters to get to the next tab stops.

`--no-separate-is`
  Do not place the keyword `is` on a separate line in a subprogram body in case if the spec occupies more than one line.

`--separate-label`
  Place statement label(s) on a separate line, with the following statement on the next line.

`--separate-loop-then`
  Place the keyword `loop` in FOR and WHILE loop statements and the keyword `then` in IF statements on a separate line.

`--no-separate-loop-then`
  Do not place the keyword `loop` in FOR and WHILE loop statements and the keyword `then` in IF statements on a separate line. This option is incompatible with `--separate-loop-then` option.

`--use-on-new-line`
  Start each USE clause in a context clause from a separate line.

`--separate-stmt-name`
  Use a separate line for a loop or block statement name, but do not use an extra indentation level for the statement itself.

The `-c1` and `-c2` switches are incompatible. The `-c3` and `-c4` switches are compatible with each other and also with `-c1` and `-c2`. The `-c0` switch disables all the other comment formatting switches.

The `-l1`, `-l2`, and `-l3` switches are incompatible.

Next: Other Formatting Options, Previous: Construct Layout Control, Up: Switches for gnatpp

#### 14.1.4 General Text Layout Control

These switches allow control over line length and indentation.

`-Mnnn`
  Maximum line length, nnn from 32...256, the default value is 79
`-innn`
  Indentation level, nnn from 1...9, the default value is 3
`-clnnn`
  Indentation level for continuation lines (relative to the line being continued), nnn from 1...9. The default value is one less than the (normal) indentation level, unless the indentation is set to 1 (in which case the default value for continuation line indentation is also 1)

Next: Setting the Source Search Path, Previous: General Text Layout Control, Up: Switches for gnatpp

#### 14.1.5 Other Formatting Options

These switches control the inclusion of missing end/exit labels, and the indentation level in case statements.

`-e`
  Do not insert missing end/exit labels. An end label is the name of a construct that may optionally be repeated at the end of the construct's declaration; e.g., the names of packages, subprograms, and tasks. An exit label is the name of a loop that may appear as target of an exit statement within the loop. By default, `gnatpp` inserts these end/exit labels when they are absent from the original source. This option suppresses such insertion, so that the formatted source reflects the original.
`-ff`
  Insert a Form Feed character after a pragma Page.
`-Tnnn`
  Do not use an additional indentation level for case alternatives and variants if there are nnn or more (the default value is 10). If nnn is 0, an additional indentation level is used for case alternatives and variants regardless of their number.
`--call_threshold=nnn`
  If the number of parameter associations is greater than nnn and if at least one association uses named notation, start each association from a new line. If nnn is 0, no check for the number of associations is made, this is the default.
`--par_threshold=nnn`
  If the number of parameter specifications is greater than nnn (or equal to nnn in case of a function), start each specification from a new line. The default for nnn is 3.

Next: Output File Control, Previous: Other Formatting Options, Up: Switches for gnatpp

#### 14.1.6 Setting the Source Search Path

To define the search path for the input source file, `gnatpp` uses the same switches as the GNAT compiler, with the same effects.

`-Idir`
  The same as the corresponding gcc switch
`-I-`
  The same as the corresponding gcc switch
`-gnatec=path`
  The same as the corresponding gcc switch
`--RTS=path`
  The same as the corresponding gcc switch

Next: Other gnatpp Switches, Previous: Setting the Source Search Path, Up: Switches for gnatpp

#### 14.1.7 Output File Control

By default the output is sent to the file whose name is obtained by appending the `.pp` suffix to the name of the input file (if the file with this name already exists, it is unconditionally overwritten). Thus if the input file is `my_ada_proc.adb` then `gnatpp` will produce `my_ada_proc.adb.pp` as output file. The output may be redirected by the following switches:

`-pipe`
  Send the output to `Standard_Output`
`-o output_file`
  Write the output into output_file. If output_file already exists, `gnatpp` terminates without reading or processing the input file.
`-of output_file`
  Write the output into output_file, overwriting the existing file (if one is present).
`-r`
  Replace the input source file with the reformatted output, and copy the original input source into the file whose name is obtained by appending the `.npp` suffix to the name of the input file. If a file with this name already exists, `gnatpp` terminates without reading or processing the input file.
`-rf`
  Like `-r` except that if the file with the specified name already exists, it is overwritten.
`-rnb`
  Replace the input source file with the reformatted output without creating any backup copy of the input source.
`--eol=xxx`
  Specifies the format of the reformatted output file. The xxx string specified with the switch may be either
  - “`dos`” MS DOS style, lines end with CR LF characters
  - “`crlf`” the same as `crlf`
  - “`unix`” UNIX style, lines end with LF character
  - “`lf`” the same as `unix`
`-We`
  Specify the wide character encoding method used to write the code in the result file e is one of the following:
  - h Hex encoding
  - u Upper half encoding
  - s Shift/JIS encoding
  - e EUC encoding
  - 8 UTF-8 encoding
  - b Brackets encoding (default value)

Options `-pipe`, `-o` and `-of` are allowed only if the call to gnatpp contains only one file to reformat. Option `--eol` and `-W` cannot be used together with `-pipe` option.

Previous: Output File Control, Up: Switches for gnatpp

#### 14.1.8 Other `gnatpp` Switches

The additional `gnatpp` switches are defined in this subsection.

`-files filename`
  Take the argument source files from the specified file. This file should be an ordinary text file containing file names separated by spaces or line breaks. You can use this switch more than once in the same call to `gnatpp`. You also can combine this switch with an explicit list of files.
`-v`
  Verbose mode; `gnatpp` generates version information and then a trace of the actions it takes to produce or obtain the ASIS tree.
`-w`
  Warning mode; `gnatpp` generates a warning whenever it cannot provide a required layout in the result source.

Previous: Switches for gnatpp, Up: The GNAT Pretty-Printer gnatpp

### 14.2 Formatting Rules

The following subsections show how `gnatpp` treats “white space”, comments, program layout, and name casing. They provide the detailed descriptions of the switches shown above.

Next: Formatting Comments, Up: Formatting Rules

#### 14.2.1 White Space and Empty Lines

`gnatpp` does not have an option to control space characters. It will add or remove spaces according to the style illustrated by the examples in the Ada Reference Manual.

The only format effectors (see Ada Reference Manual, paragraph 2.1(13)) that will appear in the output file are platform-specific line breaks, and also format effectors within (but not at the end of) comments. In particular, each horizontal tab character that is not inside a comment will be treated as a space and thus will appear in the output file as zero or more spaces depending on the reformatting of the line in which it appears. The only exception is a Form Feed character, which is inserted after a pragma `Page` when `-ff` is set.

The output file will contain no lines with trailing “white space” (spaces, format effectors).

Empty lines in the original source are preserved only if they separate declarations or statements. In such contexts, a sequence of two or more empty lines is replaced by exactly one empty line. Note that a blank line will be removed if it separates two “comment blocks” (a comment block is a sequence of whole-line comments). In order to preserve a visual separation between comment blocks, use an “empty comment” (a line comprising only hyphens) rather than an empty line. Likewise, if for some reason you wish to have a sequence of empty lines, use a sequence of empty comments instead.

Next: Construct Layout, Previous: White Space and Empty Lines, Up: Formatting Rules

#### 14.2.2 Formatting Comments

Comments in Ada code are of two kinds:

- a whole-line comment, which appears by itself (possibly preceded by “white space”) on a line
- an end-of-line comment, which follows some other Ada lexical element on the same line.

The indentation of a whole-line comment is that of either the preceding or following line in the formatted source, depending on switch settings as will be described below.

For an end-of-line comment, `gnatpp` leaves the same number of spaces between the end of the preceding Ada lexical element and the beginning of the comment as appear in the original source, unless either the comment has to be split to satisfy the line length limitation, or else the next line contains a whole line comment that is considered a continuation of this end-of-line comment (because it starts at the same position). In the latter two cases, the start of the end-of-line comment is moved right to the nearest multiple of the indentation level. This may result in a “line overflow” (the right-shifted comment extending beyond the maximum line length), in which case the comment is split as described below.

There is a difference between `-c1` (GNAT-style comment line indentation) and `-c2` (reference-manual comment line indentation). With reference-manual style, a whole-line comment is indented as if it were a declaration or statement at the same place (i.e., according to the indentation of the preceding line(s)). With GNAT style, a whole-line comment that is immediately followed by an if or case statement alternative, a record variant, or the reserved word begin, is indented based on the construct that follows it.

For example:

         if A then
             null;
                -- some comment
         else
            null;
         end if;

Reference-manual indentation produces:

         if A then
            null;
            --  some comment
         else
            null;
         end if;

while GNAT-style indentation produces:

         if A then
            null;
         --  some comment
         else
            null;
         end if;

The `-c3` switch (GNAT style comment beginning) has the following effect:

- For each whole-line comment that does not end with two hyphens, `gnatpp` inserts spaces if necessary after the starting two hyphens to ensure that there are at least two spaces between these hyphens and the first non-blank character of the comment.

For an end-of-line comment, if in the original source the next line is a whole-line comment that starts at the same position as the end-of-line comment, then the whole-line comment (and all whole-line comments that follow it and that start at the same position) will start at this position in the output file.

That is, if in the original source we have:

         begin
         A := B + C;            --  B must be in the range Low1..High1
                                --  C must be in the range Low2..High2
                      --B+C will be in the range Low1+Low2..High1+High2
         X := X + 1;

Then in the formatted source we get

         begin
            A := B + C;            --  B must be in the range Low1..High1
                                   --  C must be in the range Low2..High2
            --  B+C will be in the range Low1+Low2..High1+High2
            X := X + 1;

A comment that exceeds the line length limit will be split. Unless switch `-c4` (reformat comment blocks) is set and the line belongs to a reformattable block, splitting the line generates a `gnatpp` warning. The `-c4` switch specifies that whole-line comments may be reformatted in typical word processor style (that is, moving words between lines and putting as many words in a line as possible).

The `-c5` switch specifies, that comments that has a special format (that is, a character that is neither a letter nor digit not white space nor line break immediately following the leading `--` of the comment) should be without any change moved from the argument source into reformatted source. This switch allows to preserve comments that are used as a special marks in the code (e.g. SPARK annotation).

Next: Name Casing, Previous: Formatting Comments, Up: Formatting Rules

#### 14.2.3 Construct Layout

In several cases the suggested layout in the Ada Reference Manual includes an extra level of indentation that many programmers prefer to avoid. The affected cases include:

- Record type declaration (RM 3.8)
- Record representation clause (RM 13.5.1)
- Loop statement in case if a loop has a statement identifier (RM 5.6)
- Block statement in case if a block has a statement identifier (RM 5.6)

In compact mode (when GNAT style layout or compact layout is set), the pretty printer uses one level of indentation instead of two. This is achieved in the record definition and record representation clause cases by putting the `record` keyword on the same line as the start of the declaration or representation clause, and in the block and loop case by putting the block or loop header on the same line as the statement identifier.

The difference between GNAT style `-l1` and compact `-l2` layout on the one hand, and uncompact layout `-l3` on the other hand, can be illustrated by the following examples:

         GNAT style, compact layout              Uncompact layout

         type q is record                        type q is
            a : integer;                            record
            b : integer;                               a : integer;
         end record;                                   b : integer;
                                                    end record;

         for q use record                        for q use
            a at 0 range  0 .. 31;                  record
            b at 4 range  0 .. 31;                     a at 0 range  0 .. 31;
         end record;                                   b at 4 range  0 .. 31;
                                                    end record;

         Block : declare                         Block :
            A : Integer := 3;                       declare
         begin                                         A : Integer := 3;
            Proc (A, A);                            begin
         end Block;                                    Proc (A, A);
                                                    end Block;

         Clear : for J in 1 .. 10 loop           Clear :
            A (J) := 0;                             for J in 1 .. 10 loop
         end loop Clear;                               A (J) := 0;
                                                    end loop Clear;

A further difference between GNAT style layout and compact layout is that GNAT style layout inserts empty lines as separation for compound statements, return statements and bodies.

Note that the layout specified by `--separate-stmt-name` for named block and loop statements overrides the layout defined by these constructs by `-l1`, `-l2` or `-l3` option.

Previous: Construct Layout, Up: Formatting Rules

#### 14.2.4 Name Casing

`gnatpp` always converts the usage occurrence of a (simple) name to the same casing as the corresponding defining identifier.

You control the casing for defining occurrences via the `-n` switch. With `-nD` (“as declared”, which is the default), defining occurrences appear exactly as in the source file where they are declared. The other values for this switch — `-nU`, `-nL`, `-nM` — result in upper, lower, or mixed case, respectively. If `gnatpp` changes the casing of a defining occurrence, it analogously changes the casing of all the usage occurrences of this name.

If the defining occurrence of a name is not in the source compilation unit currently being processed by `gnatpp`, the casing of each reference to this name is changed according to the value of the `-n` switch (subject to the dictionary file mechanism described below). Thus `gnatpp` acts as though the `-n` switch had affected the casing for the defining occurrence of the name.

Some names may need to be spelled with casing conventions that are not covered by the upper-, lower-, and mixed-case transformations. You can arrange correct casing by placing such names in a dictionary file, and then supplying a `-D` switch. The casing of names from dictionary files overrides any `-n` switch.

To handle the casing of Ada predefined names and the names from GNAT libraries, `gnatpp` assumes a default dictionary file. The name of each predefined entity is spelled with the same casing as is used for the entity in the Ada Reference Manual. The name of each entity in the GNAT libraries is spelled with the same casing as is used in the declaration of that entity.

The `-D-` switch suppresses the use of the default dictionary file. Instead, the casing for predefined and GNAT-defined names will be established by the `-n` switch or explicit dictionary files. For example, by default the names `Ada.Text_IO` and `GNAT.OS_Lib` will appear as just shown, even in the presence of a `-nU` switch. To ensure that even such names are rendered in uppercase, additionally supply the `-D-` switch (or else, less conveniently, place these names in upper case in a dictionary file).

A dictionary file is a plain text file; each line in this file can be either a blank line (containing only space characters and ASCII.HT characters), an Ada comment line, or the specification of exactly one casing schema.

A casing schema is a string that has the following syntax:

           casing_schema ::= identifier | *simple_identifier*

           simple_identifier ::= letter{letter_or_digit}

(See Ada Reference Manual, Section 2.3) for the definition of the identifier lexical element and the letter_or_digit category.)

The casing schema string can be followed by white space and/or an Ada-style comment; any amount of white space is allowed before the string.

If a dictionary file is passed as the value of a `-Dfile` switch then for every simple name and every identifier, `gnatpp` checks if the dictionary defines the casing for the name or for some of its parts (the term “subword” is used below to denote the part of a name which is delimited by “_” or by the beginning or end of the word and which does not contain any “_” inside):

- if the whole name is in the dictionary, `gnatpp` uses for this name the casing defined by the dictionary; no subwords are checked for this word
- for every subword `gnatpp` checks if the dictionary contains the corresponding string of the form `*`simple_identifier`*`, and if it does, the casing of this simple_identifier is used for this subword
- if the whole name does not contain any “_” inside, and if for this name the dictionary contains two entries - one of the form identifier, and another - of the form *simple_identifier*, then the first one is applied to define the casing of this name
- if more than one dictionary file is passed as `gnatpp` switches, each dictionary adds new casing exceptions and overrides all the existing casing exceptions set by the previous dictionaries
- when `gnatpp` checks if the word or subword is in the dictionary, this check is not case sensitive

For example, suppose we have the following source to reformat:

         procedure test is
            name1 : integer := 1;
            name4_name3_name2 : integer := 2;
            name2_name3_name4 : Boolean;
            name1_var : Float;
         begin
            name2_name3_name4 := name4_name3_name2 > name1;
         end;

And suppose we have two dictionaries:

         dict1:
            NAME1
            *NaMe3*
            *Name1*

         dict2:
           *NAME3*

If `gnatpp` is called with the following switches:

         gnatpp -nM -D dict1 -D dict2 test.adb

then we will get the following name casing in the `gnatpp` output:

         procedure Test is
            NAME1             : Integer := 1;
            Name4_NAME3_Name2 : Integer := 2;
            Name2_NAME3_Name4 : Boolean;
            Name1_Var         : Float;
         begin
            Name2_NAME3_Name4 := Name4_NAME3_Name2 > NAME1;
         end Test;

Next: File Name Krunching Using gnatkr, Previous: The GNAT Pretty-Printer gnatpp, Up: Top

## 15 The GNAT Metric Tool `gnatmetric`

The `gnatmetric` tool is an ASIS-based utility for computing various program metrics. It takes an Ada source file as input and generates a file containing the metrics data as output. Various switches control which metrics are computed and output.

`gnatmetric` generates and uses the ASIS tree for the input source and thus requires the input to be syntactically and semantically legal. If this condition is not met, `gnatmetric` will generate an error message; no metric information for this file will be computed and reported.

If the compilation unit contained in the input source depends semantically upon units in files located outside the current directory, you have to provide the source search path when invoking `gnatmetric`. If it depends semantically upon units that are contained in files with names that do not follow the GNAT file naming rules, you have to provide the configuration file describing the corresponding naming scheme (see the description of the `gnatmetric` switches below.) Alternatively, you may use a project file and invoke `gnatmetric` through the `gnat` driver (see The GNAT Driver and Project Files).

The `gnatmetric` command has the form

         $ gnatmetric [switches] {filename} [-cargs gcc_switches]

where

- switches specify the metrics to compute and define the destination for the output
- Each filename is the name (including the extension) of a source file to process. “Wildcards” are allowed, and the file name may contain path information. If no filename is supplied, then the switches list must contain at least one `-files` switch (see Other gnatmetric Switches). Including both a `-files` switch and one or more filename arguments is permitted.
- ‘`gcc_switches`’ is a list of switches for `gcc`. They will be passed on to all compiler invocations made by `gnatmetric` to generate the ASIS trees. Here you can provide `-I` switches to form the source search path, and use the `-gnatec` switch to set the configuration file, use the `-gnat05` switch if sources should be compiled in Ada 2005 mode etc.

Up: The GNAT Metric Tool gnatmetric

### 15.1 Switches for `gnatmetric`

The following subsections describe the various switches accepted by `gnatmetric`, organized by category.

Next: Disable Metrics For Local Units, Up: Switches for gnatmetric

#### 15.1.1 Output File Control

`gnatmetric` has two output formats. It can generate a textual (human-readable) form, and also XML. By default only textual output is generated.

When generating the output in textual form, `gnatmetric` creates for each Ada source file a corresponding text file containing the computed metrics, except for the case when the set of metrics specified by gnatmetric parameters consists only of metrics that are computed for the whole set of analyzed sources, but not for each Ada source. By default, this file is placed in the same directory as where the source file is located, and its name is obtained by appending the `.metrix` suffix to the name of the input file.

All the output information generated in XML format is placed in a single file. By default this file is placed in the current directory and has the name `metrix.xml`.

Some of the computed metrics are summed over the units passed to `gnatmetric`; for example, the total number of lines of code. By default this information is sent to `stdout`, but a file can be specified with the `-og` switch.

The following switches control the `gnatmetric` output:

`-x`
  Generate the XML output

`-xs`
  Generate the XML output and the XML schema file that describes the structure of the XML metric report, this schema is assigned to the XML file. The schema file has the same name as the XML output file with `.xml` suffix replaced with `.xsd`

`-nt`
  Do not generate the output in text form (implies `-x`)

`-d output_dir`
  Put text files with detailed metrics into output_dir

`-o file_suffix`
  Use file_suffix, instead of `.metrix` in the name of the output file.

`-og file_name`
  Put global metrics into file_name

`-ox file_name`
  Put the XML output into file_name (also implies `-x`)

`-sfn`
  Use “short” source file names in the output. (The `gnatmetric` output includes the name(s) of the Ada source file(s) from which the metrics are computed. By default each name includes the absolute path. The `-sfn` switch causes `gnatmetric` to exclude all directory information from the file names that are output.)

Next: Specifying a set of metrics to compute, Previous: Output Files Control, Up: Switches for gnatmetric

#### 15.1.2 Disable Metrics For Local Units

`gnatmetric` relies on the GNAT compilation model − one compilation unit per one source file. It computes line metrics for the whole source file, and it also computes syntax and complexity metrics for the file's outermost unit.

By default, `gnatmetric` will also compute all metrics for certain kinds of locally declared program units:

- subprogram (and generic subprogram) bodies;
- package (and generic package) specs and bodies;
- task object and type specifications and bodies;
- protected object and type specifications and bodies.

These kinds of entities will be referred to as eligible local program units, or simply eligible local units, in the discussion below.

Note that a subprogram declaration, generic instantiation, or renaming declaration only receives metrics computation when it appear as the outermost entity in a source file.

Suppression of metrics computation for eligible local units can be obtained via the following switch:

`-nolocal`
  Do not compute detailed metrics for eligible local program units

Next: Other gnatmetric Switches, Previous: Disable Metrics For Local Units, Up: Switches for gnatmetric

#### 15.1.3 Specifying a set of metrics to compute

By default all the metrics are computed and reported. The switches described in this subsection allow you to control, on an individual basis, whether metrics are computed and reported. If at least one positive metric switch is specified (that is, a switch that defines that a given metric or set of metrics is to be computed), then only explicitly specified metrics are reported.

Next: Syntax Metrics Control, Up: Specifying a set of metrics to compute

##### 15.1.3.1 Line Metrics Control

For any (legal) source file, and for each of its eligible local program units, `gnatmetric` computes the following metrics:

- the total number of lines;
- the total number of code lines (i.e., non-blank lines that are not comments)
- the number of comment lines
- the number of code lines containing end-of-line comments;
- the comment percentage: the ratio between the number of lines that contain comments and the number of all non-blank lines, expressed as a percentage;
- the number of empty lines and lines containing only space characters and/or format effectors (blank lines)
- the average number of code lines in subprogram bodies, task bodies, entry bodies and statement sequences in package bodies (this metric is only computed across the whole set of the analyzed units)

`gnatmetric` sums the values of the line metrics for all the files being processed and then generates the cumulative results. The tool also computes for all the files being processed the average number of code lines in bodies.

You can use the following switches to select the specific line metrics to be computed and reported.

`--lines-all`
  Report all the line metrics
`--no-lines-all`
  Do not report any of line metrics
`--lines`
  Report the number of all lines
`--no-lines`
  Do not report the number of all lines
`--lines-code`
  Report the number of code lines
`--no-lines-code`
  Do not report the number of code lines
`--lines-comment`
  Report the number of comment lines
`--no-lines-comment`
  Do not report the number of comment lines
`--lines-eol-comment`
  Report the number of code lines containing end-of-line comments
`--no-lines-eol-comment`
  Do not report the number of code lines containing end-of-line comments
`--lines-ratio`
  Report the comment percentage in the program text
`--no-lines-ratio`
  Do not report the comment percentage in the program text
`--lines-blank`
  Report the number of blank lines
`--no-lines-blank`
  Do not report the number of blank lines
`--lines-average`
  Report the average number of code lines in subprogram bodies, task bodies, entry bodies and statement sequences in package bodies. The metric is computed and reported for the whole set of processed Ada sources only.
`--no-lines-average`
  Do not report the average number of code lines in subprogram bodies, task bodies, entry bodies and statement sequences in package bodies.

Next: Complexity Metrics Control, Previous: Line Metrics Control, Up: Specifying a set of metrics to compute

##### 15.1.3.2 Syntax Metrics Control

`gnatmetric` computes various syntactic metrics for the outermost unit and for each eligible local unit:

LSLOC (“Logical Source Lines Of Code”)
  The total number of declarations and the total number of statements. Note that the definition of declarations is the one given in the reference manual:

  “Each of the following is defined to be a declaration: any basic_declaration; an enumeration_literal_specification; a discriminant_specification; a component_declaration; a loop_parameter_specification; a parameter_specification; a subprogram_body; an entry_declaration; an entry_index_specification; a choice_parameter_specification; a generic_formal_parameter_declaration.”

  This means for example that each enumeration literal adds one to the count, as well as each subprogram parameter.

  Thus the results from this metric will be significantly greater than might be expected from a naive view of counting semicolons.

Maximal static nesting level of inner program units
  According to Ada Reference Manual, 10.1(1), “A program unit is either a package, a task unit, a protected unit, a protected entry, a generic unit, or an explicitly declared subprogram other than an enumeration literal.”
Maximal nesting level of composite syntactic constructs
  This corresponds to the notion of the maximum nesting level in the GNAT built-in style checks (see Style Checking)

For the outermost unit in the file, `gnatmetric` additionally computes the following metrics:

Public subprograms
  This metric is computed for package specs. It is the number of subprograms and generic subprograms declared in the visible part (including the visible part of nested packages, protected objects, and protected types).
All subprograms
  This metric is computed for bodies and subunits. The metric is equal to a total number of subprogram bodies in the compilation unit. Neither generic instantiations nor renamings-as-a-body nor body stubs are counted. Any subprogram body is counted, independently of its nesting level and enclosing constructs. Generic bodies and bodies of protected subprograms are counted in the same way as “usual” subprogram bodies.
Public types
  This metric is computed for package specs and generic package declarations. It is the total number of types that can be referenced from outside this compilation unit, plus the number of types from all the visible parts of all the visible generic packages. Generic formal types are not counted. Only types, not subtypes, are included.

  Along with the total number of public types, the following types are counted and reported separately:

  - Abstract types
  - Root tagged types (abstract, non-abstract, private, non-private). Type extensions are not counted
  - Private types (including private extensions)
  - Task types
  - Protected types
All types
  This metric is computed for any compilation unit. It is equal to the total number of the declarations of different types given in the compilation unit. The private and the corresponding full type declaration are counted as one type declaration. Incomplete type declarations and generic formal types are not counted. No distinction is made among different kinds of types (abstract, private etc.); the total number of types is computed and reported.

By default, all the syntax metrics are computed and reported. You can use the following switches to select specific syntax metrics.

`--syntax-all`
  Report all the syntax metrics
`--no-syntax-all`
  Do not report any of syntax metrics
`--declarations`
  Report the total number of declarations
`--no-declarations`
  Do not report the total number of declarations
`--statements`
  Report the total number of statements
`--no-statements`
  Do not report the total number of statements
`--public-subprograms`
  Report the number of public subprograms in a compilation unit
`--no-public-subprograms`
  Do not report the number of public subprograms in a compilation unit
`--all-subprograms`
  Report the number of all the subprograms in a compilation unit
`--no-all-subprograms`
  Do not report the number of all the subprograms in a compilation unit
`--public-types`
  Report the number of public types in a compilation unit
`--no-public-types`
  Do not report the number of public types in a compilation unit
`--all-types`
  Report the number of all the types in a compilation unit
`--no-all-types`
  Do not report the number of all the types in a compilation unit
`--unit-nesting`
  Report the maximal program unit nesting level
`--no-unit-nesting`
  Do not report the maximal program unit nesting level
`--construct-nesting`
  Report the maximal construct nesting level
`--no-construct-nesting`
  Do not report the maximal construct nesting level

Next: Coupling Metrics Control, Previous: Syntax Metrics Control, Up: Specifying a set of metrics to compute

##### 15.1.3.3 Complexity Metrics Control

For a program unit that is an executable body (a subprogram body (including generic bodies), task body, entry body or a package body containing its own statement sequence) `gnatmetric` computes the following complexity metrics:

- McCabe cyclomatic complexity;
- McCabe essential complexity;
- maximal loop nesting level;
- extra exit points (for subprograms);

The McCabe cyclomatic complexity metric is defined in http://www.mccabe.com/pdf/mccabe-nist235r.pdf

According to McCabe, both control statements and short-circuit control forms should be taken into account when computing cyclomatic complexity. For Ada 2012 we have also take into account conditional expressions and quantified expressions. For each body, we compute three metric values:

- the complexity introduced by control statements only, without taking into account short-circuit forms,
- the complexity introduced by short-circuit control forms only, and
- the total cyclomatic complexity, which is the sum of these two values.

The cyclomatic complexity is also computed for Ada 2012 expression functions. An expression function cannot have statements as its components, so only one metric value is computed as a cyclomatic complexity of an expression function.

The origin of cyclomatic complexity metric is the need to estimate the number of independent paths in the control flow graph that in turn gives the number of tests needed to satisfy paths coverage testing completeness criterion. Considered from the testing point of view, a static Ada `loop` (that is, the `loop` statement having static subtype in loop parameter specification) does not add to cyclomatic complexity. By providing `--no-static-loop` option a user may specify that such loops should not be counted when computing the cyclomatic complexity metric

The Ada essential complexity metric is a McCabe cyclomatic complexity metric counted for the code that is reduced by excluding all the pure structural Ada control statements. An compound statement is considered as a non-structural if it contains a `raise` or `return` statement as it subcomponent, or if it contains a `goto` statement that transfers the control outside the operator. A selective accept statement with `terminate` alternative is considered as non-structural statement. When computing this metric, `exit` statements are treated in the same way as `goto` statements unless `-ne` option is specified.

The Ada essential complexity metric defined here is intended to quantify the extent to which the software is unstructured. It is adapted from the McCabe essential complexity metric defined in http://www.mccabe.com/pdf/mccabe-nist235r.pdf but is modified to be more suitable for typical Ada usage. For example, short circuit forms are not penalized as unstructured in the Ada essential complexity metric.

When computing cyclomatic and essential complexity, `gnatmetric` skips the code in the exception handlers and in all the nested program units. The code of assertions and predicates (that is, subprogram preconditions and postconditions, subtype predicates and type invariants) is also skipped.

By default, all the complexity metrics are computed and reported. For more fine-grained control you can use the following switches:

`--complexity-all`
  Report all the complexity metrics
`--no-complexity-all`
  Do not report any of complexity metrics
`--complexity-cyclomatic`
  Report the McCabe Cyclomatic Complexity
`--no-complexity-cyclomatic`
  Do not report the McCabe Cyclomatic Complexity
`--complexity-essential`
  Report the Essential Complexity
`--no-complexity-essential`
  Do not report the Essential Complexity
`--loop-nesting`
  Report maximal loop nesting level
`--no-loop-nesting`
  Do not report maximal loop nesting level
`--complexity-average`
  Report the average McCabe Cyclomatic Complexity for all the subprogram bodies, task bodies, entry bodies and statement sequences in package bodies. The metric is computed and reported for whole set of processed Ada sources only.
`--no-complexity-average`
  Do not report the average McCabe Cyclomatic Complexity for all the subprogram bodies, task bodies, entry bodies and statement sequences in package bodies

`-ne`
  Do not consider `exit` statements as `goto`s when computing Essential Complexity

`--no-static-loop`
  Do not consider static loops when computing cyclomatic complexity
`--extra-exit-points`
  Report the extra exit points for subprogram bodies. As an exit point, this metric counts `return` statements and raise statements in case when the raised exception is not handled in the same body. In case of a function this metric subtracts 1 from the number of exit points, because a function body must contain at least one `return` statement.
`--no-extra-exit-points`
  Do not report the extra exit points for subprogram bodies

Previous: Complexity Metrics Control, Up: Specifying a set of metrics to compute

##### 15.1.3.4 Coupling Metrics Control

Coupling metrics measure the dependencies between a given entity and other entities the program consists of. The goal of these metrics is to estimate the stability of the whole program considered as the collection of entities (modules, classes etc.).

Gnatmetric computes the following coupling metrics:

- object-oriented coupling - for classes in traditional object-oriented sense;
- unit coupling - for all the program units making up a program;
- control coupling - this metric counts dependencies between a unit and only those units that define subprograms;

Two kinds of coupling metrics are computed:

fan-out coupling (efferent coupling)
  the number of entities the given entity depends upon. It estimates in what extent the given entity depends on the changes in “external world”
fan-in coupling (afferent coupling)
  the number of entities that depend on a given entity. It estimates in what extent the “external world” depends on the changes in a given entity

Object-oriented coupling metrics are metrics that measure the dependencies between a given class (or a group of classes) and the other classes in the program. In this subsection the term “class” is used in its traditional object-oriented programming sense (an instantiable module that contains data and/or method members). A category (of classes) is a group of closely related classes that are reused and/or modified together.

A class `K`'s fan-out coupling is the number of classes that `K` depends upon. A category's fan-out coupling is the number of classes outside the category that the classes inside the category depend upon.

A class `K`'s fan-in coupling is the number of classes that depend upon `K`. A category's fan-in coupling is the number of classes outside the category that depend on classes belonging to the category.

Ada's implementation of the object-oriented paradigm does not use the traditional class notion, so the definition of the coupling metrics for Ada maps the class and class category notions onto Ada constructs.

For the coupling metrics, several kinds of modules – a library package, a library generic package, and a library generic package instantiation – that define a tagged type or an interface type are considered to be a class. A category consists of a library package (or a library generic package) that defines a tagged or an interface type, together with all its descendant (generic) packages that define tagged or interface types. That is a category is an Ada hierarchy of library-level program units. So class coupling in case of Ada is called as tagged coupling, and category coupling - as hierarchy coupling.

For any package counted as a class, its body and subunits (if any) are considered together with its spec when counting the dependencies, and coupling metrics are reported for spec units only. For dependencies between classes, the Ada semantic dependencies are considered. For object-oriented coupling metrics, only dependencies on units that are considered as classes, are considered.

For unit and control coupling also not compilation units but program units are counted. That is, for a package, its spec, its body and its subunits (if any) are considered as making up one unit, and the dependencies that are counted are the dependencies of all these compilation units collected together as the dependencies as a (whole) unit. And metrics are reported for spec compilation units only (or for a subprogram body unit in case if there is no separate spec for the given subprogram).

For unit coupling, dependencies between all kinds of program units are considered. For control coupling, for each unit the dependencies of this unit upon units that define subprograms are counted, so control fan-out coupling is reported for all units, but control fan-in coupling - only for the units that define subprograms.

The following simple example illustrates the difference between unit coupling and control coupling metrics:

         package Lib_1 is
             function F_1 (I : Integer) return Integer;
         end Lib_1;

         package Lib_2 is
             type T_2 is new Integer;
         end Lib_2;

         package body Lib_1 is
             function F_1 (I : Integer) return Integer is
             begin
                return I + 1;
             end F_1;
         end Lib_1;

         with Lib_2; use Lib_2;
         package Pack is
             Var : T_2;
             function Fun (I : Integer) return Integer;
         end Pack;

         with Lib_1; use Lib_1;
         package body Pack is
             function Fun (I : Integer) return Integer is
             begin
                return F_1 (I);
             end Fun;
         end Pack;

if we apply `gnatmetric` with `--coupling-all` option to these units, the result will be:

         Coupling metrics:
         =================
             Unit Lib_1 (C:\customers\662\L406-007\lib_1.ads)
                control fan-out coupling  : 0
                control fan-in coupling   : 1
                unit fan-out coupling     : 0
                unit fan-in coupling      : 1

             Unit Pack (C:\customers\662\L406-007\pack.ads)
                control fan-out coupling  : 1
                control fan-in coupling   : 0
                unit fan-out coupling     : 2
                unit fan-in coupling      : 0

             Unit Lib_2 (C:\customers\662\L406-007\lib_2.ads)
                control fan-out coupling  : 0
                unit fan-out coupling     : 0
                unit fan-in coupling      : 1

The result does not contain values for object-oriented coupling because none of the argument unit contains a tagged type and therefore none of these units can be treated as a class.

`Pack` (considered as a program unit, that is spec+body) depends on two units - `Lib_1` `and Lib_2`, therefore it has unit fan-out coupling equals to 2. And nothing depend on it, so its unit fan-in coupling is 0 as well as control fan-in coupling. Only one of the units `Pack` depends upon defines a subprogram, so its control fan-out coupling is 1.

`Lib_2` depends on nothing, so fan-out metrics for it are 0. It does not define a subprogram, so control fan-in metric cannot be applied to it, and there is one unit that depends on it (`Pack`), so it has unit fan-in coupling equals to 1.

`Lib_1` is similar to `Lib_2`, but it does define a subprogram. So it has control fan-in coupling equals to 1 (because there is a unit depending on it).

When computing coupling metrics, `gnatmetric` counts only dependencies between units that are arguments of the `gnatmetric` call. Coupling metrics are program-wide (or project-wide) metrics, so to get a valid result, you should call `gnatmetric` for the whole set of sources that make up your program. It can be done by calling `gnatmetric` from the GNAT driver with `-U` option (see The GNAT Driver and Project Files for details).

By default, all the coupling metrics are disabled. You can use the following switches to specify the coupling metrics to be computed and reported:

`--coupling-all`
  Report all the coupling metrics
`--tagged-coupling-out`
  Report tagged (class) fan-out coupling
`--tagged-coupling-in`
  Report tagged (class) fan-in coupling
`--hierarchy-coupling-out`
  Report hierarchy (category) fan-out coupling
`--hierarchy-coupling-in`
  Report hierarchy (category) fan-in coupling
`--unit-coupling-out`
  Report unit fan-out coupling
`--unit-coupling-in`
  Report unit fan-in coupling
`--control-coupling-out`
  Report control fan-out coupling
`--control-coupling-in`
  Report control fan-in coupling

Next: Generate project-wide metrics, Previous: Specifying a set of metrics to compute, Up: Switches for gnatmetric

#### 15.1.4 Other `gnatmetric` Switches

Additional `gnatmetric` switches are as follows:

`-files filename`
  Take the argument source files from the specified file. This file should be an ordinary text file containing file names separated by spaces or line breaks. You can use this switch more than once in the same call to `gnatmetric`. You also can combine this switch with an explicit list of files.
`-v`
  Verbose mode; `gnatmetric` generates version information and then a trace of sources being processed.
`-q`
  Quiet mode.

Previous: Other gnatmetric Switches, Up: Switches for gnatmetric

#### 15.1.5 Generate project-wide metrics

In order to compute metrics on all units of a given project, you can use the `gnat` driver along with the `-P` option:

            gnat metric -Pproj

If the project `proj` depends upon other projects, you can compute the metrics on the project closure using the `-U` option:

            gnat metric -Pproj -U

Finally, if not all the units are relevant to a particular main program in the project closure, you can generate metrics for the set of units needed to create a given main program (unit closure) using the `-U` option followed by the name of the main unit:

            gnat metric -Pproj -U main

Next: Preprocessing Using gnatprep, Previous: The GNAT Metric Tool gnatmetric, Up: Top

## 16 File Name Krunching Using `gnatkr`

This chapter discusses the method used by the compiler to shorten the default file names chosen for Ada units so that they do not exceed the maximum length permitted. It also describes the `gnatkr` utility that can be used to determine the result of applying this shortening.

Next: Using gnatkr, Up: File Name Krunching Using gnatkr

### 16.1 About `gnatkr`

The default file naming rule in GNAT is that the file name must be derived from the unit name. The exact default rule is as follows:

- Take the unit name and replace all dots by hyphens.
- If such a replacement occurs in the second character position of a name, and the first character is ‘`a`’, ‘`g`’, ‘`s`’, or ‘`i`’, then replace the dot by the character ‘`~`’ (tilde) instead of a minus.

The reason for this exception is to avoid clashes with the standard names for children of System, Ada, Interfaces, and GNAT, which use the prefixes ‘`s-`’, ‘`a-`’, ‘`i-`’, and ‘`g-`’, respectively.

The `-gnatknn` switch of the compiler activates a “krunching” circuit that limits file names to nn characters (where nn is a decimal integer). For example, using OpenVMS, where the maximum file name length is 39, the value of nn is usually set to 39, but if you want to generate a set of files that would be usable if ported to a system with some different maximum file length, then a different value can be specified. The default value of 39 for OpenVMS need not be specified.

The `gnatkr` utility can be used to determine the krunched name for a given file, when krunched to a specified maximum length.

Next: Krunching Method, Previous: About gnatkr, Up: File Name Krunching Using gnatkr

### 16.2 Using `gnatkr`

The `gnatkr` command has the form

         $ gnatkr name [length]

name is the uncrunched file name, derived from the name of the unit in the standard manner described in the previous section (i.e., in particular all dots are replaced by hyphens). The file name may or may not have an extension (defined as a suffix of the form period followed by arbitrary characters other than period). If an extension is present then it will be preserved in the output. For example, when krunching `hellofile.ads` to eight characters, the result will be hellofil.ads.

Note: for compatibility with previous versions of `gnatkr` dots may appear in the name instead of hyphens, but the last dot will always be taken as the start of an extension. So if `gnatkr` is given an argument such as `Hello.World.adb` it will be treated exactly as if the first period had been a hyphen, and for example krunching to eight characters gives the result `hellworl.adb`.

Note that the result is always all lower case (except on OpenVMS where it is all upper case). Characters of the other case are folded as required.

length represents the length of the krunched name. The default when no argument is given is 8 characters. A length of zero stands for unlimited, in other words do not chop except for system files where the implied crunching length is always eight characters.

The output is the krunched name. The output has an extension only if the original argument was a file name with an extension.

Next: Examples of gnatkr Usage, Previous: Using gnatkr, Up: File Name Krunching Using gnatkr

### 16.3 Krunching Method

The initial file name is determined by the name of the unit that the file contains. The name is formed by taking the full expanded name of the unit and replacing the separating dots with hyphens and using lowercase for all letters, except that a hyphen in the second character position is replaced by a tilde if the first character is ‘`a`’, ‘`i`’, ‘`g`’, or ‘`s`’. The extension is `.ads` for a spec and `.adb` for a body. Krunching does not affect the extension, but the file name is shortened to the specified length by following these rules:

- The name is divided into segments separated by hyphens, tildes or underscores and all hyphens, tildes, and underscores are eliminated. If this leaves the name short enough, we are done.
- If the name is too long, the longest segment is located (left-most if there are two of equal length), and shortened by dropping its last character. This is repeated until the name is short enough.

  As an example, consider the krunching of
  `our-strings-wide_fixed.adb` to fit the name into 8 characters as required by some operating systems.

                our-strings-wide_fixed 22
                our strings wide fixed 19
                our string  wide fixed 18
                our strin   wide fixed 17
                our stri    wide fixed 16
                our stri    wide fixe  15
                our str     wide fixe  14
                our str     wid  fixe  13
                our str     wid  fix   12
                ou  str     wid  fix   11
                ou  st      wid  fix   10
                ou  st      wi   fix   9
                ou  st      wi   fi    8
                Final file name: oustwifi.adb

- The file names for all predefined units are always krunched to eight characters. The krunching of these predefined units uses the following special prefix replacements:
  `ada-`
    replaced by `a-`
  `gnat-`
    replaced by `g-`
  `interfaces-`
    replaced by `i-`
  `system-`
    replaced by `s-`

  These system files have a hyphen in the second character position. That is why normal user files replace such a character with a tilde, to avoid confusion with system file names.

  As an example of this special rule, consider
  `ada-strings-wide_fixed.adb`, which gets krunched as follows:

                ada-strings-wide_fixed 22
                a-  strings wide fixed 18
                a-  string  wide fixed 17
                a-  strin   wide fixed 16
                a-  stri    wide fixed 15
                a-  stri    wide fixe  14
                a-  str     wide fixe  13
                a-  str     wid  fixe  12
                a-  str     wid  fix   11
                a-  st      wid  fix   10
                a-  st      wi   fix   9
                a-  st      wi   fi    8
                Final file name: a-stwifi.adb

Of course no file shortening algorithm can guarantee uniqueness over all possible unit names, and if file name krunching is used then it is your responsibility to ensure that no name clashes occur. The utility program `gnatkr` is supplied for conveniently determining the krunched name of a file.

Previous: Krunching Method, Up: File Name Krunching Using gnatkr

### 16.4 Examples of `gnatkr` Usage

         $ gnatkr very_long_unit_name.ads      --> velounna.ads
         $ gnatkr grandparent-parent-child.ads --> grparchi.ads
         $ gnatkr Grandparent.Parent.Child.ads --> grparchi.ads
         $ gnatkr grandparent-parent-child     --> grparchi
         $ gnatkr very_long_unit_name.ads/count=6 --> vlunna.ads
         $ gnatkr very_long_unit_name.ads/count=0 --> very_long_unit_name.ads

Next: The GNAT Library Browser gnatls, Previous: File Name Krunching Using gnatkr, Up: Top

## 17 Preprocessing Using `gnatprep`

This chapter discusses how to use GNAT's `gnatprep` utility for simple preprocessing. Although designed for use with GNAT, `gnatprep` does not depend on any special GNAT features. For further discussion of conditional compilation in general, see Conditional Compilation.

Next: Using gnatprep, Up: Preprocessing Using gnatprep

### 17.1 Preprocessing Symbols

Preprocessing symbols are defined in definition files and referred to in sources to be preprocessed. A Preprocessing symbol is an identifier, following normal Ada (case-insensitive) rules for its syntax, with the restriction that all characters need to be in the ASCII set (no accented letters).

Next: Switches for gnatprep, Previous: Preprocessing Symbols, Up: Preprocessing Using gnatprep

### 17.2 Using `gnatprep`

To call `gnatprep` use

         $ gnatprep [switches] infile outfile [deffile]

where

switches
  is an optional sequence of switches as described in the next section.
infile
  is the full name of the input file, which is an Ada source file containing preprocessor directives.
outfile
  is the full name of the output file, which is an Ada source in standard Ada form. When used with GNAT, this file name will normally have an ads or adb suffix.
deffile
  is the full name of a text file containing definitions of preprocessing symbols to be referenced by the preprocessor. This argument is optional, and can be replaced by the use of the `-D` switch.

Next: Form of Definitions File, Previous: Using gnatprep, Up: Preprocessing Using gnatprep

### 17.3 Switches for `gnatprep`

`-b`
  Causes both preprocessor lines and the lines deleted by preprocessing to be replaced by blank lines in the output source file, preserving line numbers in the output file.
`-c`
  Causes both preprocessor lines and the lines deleted by preprocessing to be retained in the output source as comments marked with the special string `"--! "`. This option will result in line numbers being preserved in the output file.
`-C`
  Causes comments to be scanned. Normally comments are ignored by gnatprep. If this option is specified, then comments are scanned and any $symbol substitutions performed as in program text. This is particularly useful when structured comments are used (e.g., when writing programs in the SPARK dialect of Ada). Note that this switch is not available when doing integrated preprocessing (it would be useless in this context since comments are ignored by the compiler in any case).
`-Dsymbol=value`
  Defines a new preprocessing symbol, associated with value. If no value is given on the command line, then symbol is considered to be `True`. This switch can be used in place of a definition file.
`-r`
  Causes a `Source_Reference` pragma to be generated that references the original input file, so that error messages will use the file name of this original file. The use of this switch implies that preprocessor lines are not to be removed from the file, so its use will force `-b` mode if `-c` has not been specified explicitly.

  Note that if the file to be preprocessed contains multiple units, then it will be necessary to `gnatchop` the output file from `gnatprep`. If a `Source_Reference` pragma is present in the preprocessed file, it will be respected by `gnatchop -r` so that the final chopped files will correctly refer to the original input source file for `gnatprep`.

`-s`
  Causes a sorted list of symbol names and values to be listed on the standard output file.
`-u`
  Causes undefined symbols to be treated as having the value FALSE in the context of a preprocessor test. In the absence of this option, an undefined symbol in a `#if` or `#elsif` test will be treated as an error.

Note: if neither `-b` nor `-c` is present, then preprocessor lines and deleted lines are completely removed from the output, unless -r is specified, in which case -b is assumed.

Next: Form of Input Text for gnatprep, Previous: Switches for gnatprep, Up: Preprocessing Using gnatprep

### 17.4 Form of Definitions File

The definitions file contains lines of the form

         symbol := value

where symbol is a preprocessing symbol, and value is one of the following:

- Empty, corresponding to a null substitution
- A string literal using normal Ada syntax
- Any sequence of characters from the set (letters, digits, period, underline).

Comment lines may also appear in the definitions file, starting with the usual `--`, and comments may be added to the definitions lines.

Previous: Form of Definitions File, Up: Preprocessing Using gnatprep

### 17.5 Form of Input Text for `gnatprep`

The input text may contain preprocessor conditional inclusion lines, as well as general symbol substitution sequences.

The preprocessor conditional inclusion commands have the form

         #if expression [then]
            lines
         #elsif expression [then]
            lines
         #elsif expression [then]
            lines
         ...
         #else
            lines
         #end if;

In this example, expression is defined by the following grammar:

         expression ::=  <symbol>
         expression ::=  <symbol> = "<value>"
         expression ::=  <symbol> = <symbol>
         expression ::=  <symbol> 'Defined
         expression ::=  not expression
         expression ::=  expression and expression
         expression ::=  expression or expression
         expression ::=  expression and then expression
         expression ::=  expression or else expression
         expression ::=  ( expression )

The following restriction exists: it is not allowed to have "and" or "or" following "not" in the same expression without parentheses. For example, this is not allowed:

            not X or Y

This should be one of the following:

            (not X) or Y
            not (X or Y)

For the first test (expression ::= <symbol>) the symbol must have either the value true or false, that is to say the right-hand of the symbol definition must be one of the (case-insensitive) literals `True` or `False`. If the value is true, then the corresponding lines are included, and if the value is false, they are excluded.

The test (expression ::= <symbol> `'Defined`) is true only if the symbol has been defined in the definition file or by a `-D` switch on the command line. Otherwise, the test is false.

The equality tests are case insensitive, as are all the preprocessor lines.

If the symbol referenced is not defined in the symbol definitions file, then the effect depends on whether or not switch `-u` is specified. If so, then the symbol is treated as if it had the value false and the test fails. If this switch is not specified, then it is an error to reference an undefined symbol. It is also an error to reference a symbol that is defined with a value other than `True` or `False`.

The use of the `not` operator inverts the sense of this logical test. The `not` operator cannot be combined with the `or` or `and` operators, without parentheses. For example, "if not X or Y then" is not allowed, but "if (not X) or Y then" and "if not (X or Y) then" are.

The `then` keyword is optional as shown

The `#` must be the first non-blank character on a line, but otherwise the format is free form. Spaces or tabs may appear between the `#` and the keyword. The keywords and the symbols are case insensitive as in normal Ada code. Comments may be used on a preprocessor line, but other than that, no other tokens may appear on a preprocessor line. Any number of `elsif` clauses can be present, including none at all. The `else` is optional, as in Ada.

The `#` marking the start of a preprocessor line must be the first non-blank character on the line, i.e., it must be preceded only by spaces or horizontal tabs.

Symbol substitution outside of preprocessor lines is obtained by using the sequence

         $symbol

anywhere within a source line, except in a comment or within a string literal. The identifier following the `$` must match one of the symbols defined in the symbol definition file, and the result is to substitute the value of the symbol in place of `$symbol` in the output file.

Note that although the substitution of strings within a string literal is not possible, it is possible to have a symbol whose defined value is a string literal. So instead of setting XYZ to `hello` and writing:

         Header : String := "$XYZ";

you should set XYZ to `"hello"` and write:

         Header : String := $XYZ;

and then the substitution will occur as desired.

Next: Cleaning Up Using gnatclean, Previous: Preprocessing Using gnatprep, Up: Top

## 18 The GNAT Library Browser `gnatls`

`gnatls` is a tool that outputs information about compiled units. It gives the relationship between objects, unit names and source files. It can also be used to check the source dependencies of a unit as well as various characteristics.

Note: to invoke `gnatls` with a project file, use the `gnat` driver (see The GNAT Driver and Project Files).

Next: Switches for gnatls, Up: The GNAT Library Browser gnatls

### 18.1 Running `gnatls`

The `gnatls` command has the form

         $ gnatls switches object_or_ali_file

The main argument is the list of object or `ali` files (see The Ada Library Information Files) for which information is requested.

In normal mode, without additional option, `gnatls` produces a four-column listing. Each line represents information for a specific object. The first column gives the full path of the object, the second column gives the name of the principal unit in this object, the third column gives the status of the source and the fourth column gives the full path of the source representing this unit. Here is a simple example of use:

         $ gnatls *.o
         ./demo1.o            demo1            DIF demo1.adb
         ./demo2.o            demo2             OK demo2.adb
         ./hello.o            h1                OK hello.adb
         ./instr-child.o      instr.child      MOK instr-child.adb
         ./instr.o            instr             OK instr.adb
         ./tef.o              tef              DIF tef.adb
         ./text_io_example.o  text_io_example   OK text_io_example.adb
         ./tgef.o             tgef             DIF tgef.adb

The first line can be interpreted as follows: the main unit which is contained in object file `demo1.o` is demo1, whose main source is in `demo1.adb`. Furthermore, the version of the source used for the compilation of demo1 has been modified (DIF). Each source file has a status qualifier which can be:

`OK (unchanged)`
  The version of the source file used for the compilation of the specified unit corresponds exactly to the actual source file.
`MOK (slightly modified)`
  The version of the source file used for the compilation of the specified unit differs from the actual source file but not enough to require recompilation. If you use gnatmake with the qualifier `-m (minimal recompilation)`, a file marked MOK will not be recompiled.
`DIF (modified)`
  No version of the source found on the path corresponds to the source used to build this object.
`??? (file not found)`
  No source file was found for this unit.
`HID (hidden, unchanged version not first on PATH)`
  The version of the source that corresponds exactly to the source used for compilation has been found on the path but it is hidden by another version of the same source that has been modified.

Next: Examples of gnatls Usage, Previous: Running gnatls, Up: The GNAT Library Browser gnatls

### 18.2 Switches for `gnatls`

`gnatls` recognizes the following switches:

Display Copyright and version, then exit disregarding all other options.
`--help`
  If `--version` was not used, display usage, then exit disregarding all other options.
`-a`
  Consider all units, including those of the predefined Ada library. Especially useful with `-d`.
`-d`
  List sources from which specified units depend on.
`-h`
  Output the list of options.
`-o`
  Only output information about object files.
`-s`
  Only output information about source files.
`-u`
  Only output information about compilation units.
`-files=file`
  Take as arguments the files listed in text file file. Text file file may contain empty lines that are ignored. Each nonempty line should contain the name of an existing file. Several such switches may be specified simultaneously.
`-aOdir`
`-aIdir`
`-Idir`
`-I-`
`-nostdinc`
  Source path manipulation. Same meaning as the equivalent `gnatmake` flags (see Switches for gnatmake).
`--RTS=rts-path`
  Specifies the default location of the runtime library. Same meaning as the equivalent `gnatmake` flag (see Switches for gnatmake).
`-v`
  Verbose mode. Output the complete source, object and project paths. Do not use the default column layout but instead use long format giving as much as information possible on each requested units, including special characteristics such as:
  `Preelaborable`
    The unit is preelaborable in the Ada sense.
  `No_Elab_Code`
    No elaboration code has been produced by the compiler for this unit.
  `Pure`
    The unit is pure in the Ada sense.
  `Elaborate_Body`
    The unit contains a pragma Elaborate_Body.
  `Remote_Types`
    The unit contains a pragma Remote_Types.
  `Shared_Passive`
    The unit contains a pragma Shared_Passive.
  `Predefined`
    This unit is part of the predefined environment and cannot be modified by the user.
  `Remote_Call_Interface`
    The unit contains a pragma Remote_Call_Interface.

Previous: Switches for gnatls, Up: The GNAT Library Browser gnatls

### 18.3 Example of `gnatls` Usage

Example of using the verbose switch. Note how the source and object paths are affected by the -I switch.

         $ gnatls -v -I.. demo1.o

         GNATLS 5.03w (20041123-34)
         Copyright 1997-2004 Free Software Foundation, Inc.

         Source Search Path:
            <Current_Directory>
            ../
            /home/comar/local/adainclude/

         Object Search Path:
            <Current_Directory>
            ../
            /home/comar/local/lib/gcc-lib/x86-linux/3.4.3/adalib/

         Project Search Path:
            <Current_Directory>
            /home/comar/local/lib/gnat/

         ./demo1.o
            Unit =>
              Name   => demo1
              Kind   => subprogram body
              Flags  => No_Elab_Code
              Source => demo1.adb    modified

The following is an example of use of the dependency list. Note the use of the -s switch which gives a straight list of source files. This can be useful for building specialized scripts.

         $ gnatls -d demo2.o
         ./demo2.o   demo2        OK demo2.adb
                                  OK gen_list.ads
                                  OK gen_list.adb
                                  OK instr.ads
                                  OK instr-child.ads

         $ gnatls -d -s -a demo1.o
         demo1.adb
         /home/comar/local/adainclude/ada.ads
         /home/comar/local/adainclude/a-finali.ads
         /home/comar/local/adainclude/a-filico.ads
         /home/comar/local/adainclude/a-stream.ads
         /home/comar/local/adainclude/a-tags.ads
         gen_list.ads
         gen_list.adb
         /home/comar/local/adainclude/gnat.ads
         /home/comar/local/adainclude/g-io.ads
         instr.ads
         /home/comar/local/adainclude/system.ads
         /home/comar/local/adainclude/s-exctab.ads
         /home/comar/local/adainclude/s-finimp.ads
         /home/comar/local/adainclude/s-finroo.ads
         /home/comar/local/adainclude/s-secsta.ads
         /home/comar/local/adainclude/s-stalib.ads
         /home/comar/local/adainclude/s-stoele.ads
         /home/comar/local/adainclude/s-stratt.ads
         /home/comar/local/adainclude/s-tasoli.ads
         /home/comar/local/adainclude/s-unstyp.ads
         /home/comar/local/adainclude/unchconv.ads

Next: GNAT and Libraries, Previous: The GNAT Library Browser gnatls, Up: Top

## 19 Cleaning Up Using `gnatclean`

`gnatclean` is a tool that allows the deletion of files produced by the compiler, binder and linker, including ALI files, object files, tree files, expanded source files, library files, interface copy source files, binder generated files and executable files.

Next: Switches for gnatclean, Up: Cleaning Up Using gnatclean

### 19.1 Running `gnatclean`

The `gnatclean` command has the form:

         $ gnatclean switches names

names is a list of source file names. Suffixes `.ads` and `adb` may be omitted. If a project file is specified using switch `-P`, then names may be completely omitted.

In normal mode, `gnatclean` delete the files produced by the compiler and, if switch `-c` is not specified, by the binder and the linker. In informative-only mode, specified by switch `-n`, the list of files that would have been deleted in normal mode is listed, but no file is actually deleted.

Previous: Running gnatclean, Up: Cleaning Up Using gnatclean

### 19.2 Switches for `gnatclean`

`gnatclean` recognizes the following switches:

Display Copyright and version, then exit disregarding all other options.
`--help`
  If `--version` was not used, display usage, then exit disregarding all other options.
`--subdirs=subdir`
  Actual object directory of each project file is the subdirectory subdir of the object directory specified or defaulted in the project file.
`--unchecked-shared-lib-imports`
  By default, shared library projects are not allowed to import static library projects. When this switch is used on the command line, this restriction is relaxed.
`-c`
  Only attempt to delete the files produced by the compiler, not those produced by the binder or the linker. The files that are not to be deleted are library files, interface copy files, binder generated files and executable files.
`-D dir`
  Indicate that ALI and object files should normally be found in directory dir.
`-F`
  When using project files, if some errors or warnings are detected during parsing and verbose mode is not in effect (no use of switch -v), then error lines start with the full path name of the project file, rather than its simple file name.
`-h`
  Output a message explaining the usage of `gnatclean`.
`-n`
  Informative-only mode. Do not delete any files. Output the list of the files that would have been deleted if this switch was not specified.
`-Pproject`
  Use project file project. Only one such switch can be used. When cleaning a project file, the files produced by the compilation of the immediate sources or inherited sources of the project files are to be deleted. This is not depending on the presence or not of executable names on the command line.
`-q`
  Quiet output. If there are no errors, do not output anything, except in verbose mode (switch -v) or in informative-only mode (switch -n).
`-r`
  When a project file is specified (using switch -P), clean all imported and extended project files, recursively. If this switch is not specified, only the files related to the main project file are to be deleted. This switch has no effect if no project file is specified.
`-v`
  Verbose mode.
`-vPx`
  Indicates the verbosity of the parsing of GNAT project files. See Switches Related to Project Files.
`-Xname=value`
  Indicates that external variable name has the value value. The Project Manager will use this value for occurrences of `external(name)` when parsing the project file. See Switches Related to Project Files.
`-aOdir`
  When searching for ALI and object files, look in directory dir.
`-Idir`
  Equivalent to `-aOdir`.
`-I-`
  Do not look for ALI or object files in the directory where `gnatclean` was invoked.

Next: Using the GNU make Utility, Previous: Cleaning Up Using gnatclean, Up: Top

## 20 GNAT and Libraries

This chapter describes how to build and use libraries with GNAT, and also shows how to recompile the GNAT run-time library. You should be familiar with the Project Manager facility (see GNAT Project Manager) before reading this chapter.

Next: General Ada Libraries, Up: GNAT and Libraries

### 20.1 Introduction to Libraries in GNAT

A library is, conceptually, a collection of objects which does not have its own main thread of execution, but rather provides certain services to the applications that use it. A library can be either statically linked with the application, in which case its code is directly included in the application, or, on platforms that support it, be dynamically linked, in which case its code is shared by all applications making use of this library.

GNAT supports both types of libraries. In the static case, the compiled code can be provided in different ways. The simplest approach is to provide directly the set of objects resulting from compilation of the library source files. Alternatively, you can group the objects into an archive using whatever commands are provided by the operating system. For the latter case, the objects are grouped into a shared library.

In the GNAT environment, a library has three types of components:

- Source files.
- `ALI` files. See The Ada Library Information Files.
- Object files, an archive or a shared library.

A GNAT library may expose all its source files, which is useful for documentation purposes. Alternatively, it may expose only the units needed by an external user to make use of the library. That is to say, the specs reflecting the library services along with all the units needed to compile those specs, which can include generic bodies or any body implementing an inlined routine. In the case of stand-alone libraries those exposed units are called interface units (see Stand-alone Ada Libraries).

All compilation units comprising an application, including those in a library, need to be elaborated in an order partially defined by Ada's semantics. GNAT computes the elaboration order from the `ALI` files and this is why they constitute a mandatory part of GNAT libraries. Stand-alone libraries are the exception to this rule because a specific library elaboration routine is produced independently of the application(s) using the library.

Next: Stand-alone Ada Libraries, Previous: Introduction to Libraries in GNAT, Up: GNAT and Libraries

### 20.2 General Ada Libraries

Next: Installing a library, Up: General Ada Libraries

#### 20.2.1 Building a library

The easiest way to build a library is to use the Project Manager, which supports a special type of project called a Library Project (see Library Projects).

A project is considered a library project, when two project-level attributes are defined in it: `Library_Name` and `Library_Dir`. In order to control different aspects of library configuration, additional optional project-level attributes can be specified:

`Library_Kind`
  This attribute controls whether the library is to be static or dynamic
`Library_Version`
  This attribute specifies the library version; this value is used during dynamic linking of shared libraries to determine if the currently installed versions of the binaries are compatible.
`Library_Options`
`Library_GCC`
  These attributes specify additional low-level options to be used during library generation, and redefine the actual application used to generate library.

The GNAT Project Manager takes full care of the library maintenance task, including recompilation of the source files for which objects do not exist or are not up to date, assembly of the library archive, and installation of the library (i.e., copying associated source, object and `ALI` files to the specified location).

Here is a simple library project file:

         project My_Lib is
            for Source_Dirs use ("src1", "src2");
            for Object_Dir use "obj";
            for Library_Name use "mylib";
            for Library_Dir use "lib";
            for Library_Kind use "dynamic";
         end My_lib;

and the compilation command to build and install the library:

           $ gnatmake -Pmy_lib

It is not entirely trivial to perform manually all the steps required to produce a library. We recommend that you use the GNAT Project Manager for this task. In special cases where this is not desired, the necessary steps are discussed below.

There are various possibilities for compiling the units that make up the library: for example with a Makefile (see Using the GNU make Utility) or with a conventional script. For simple libraries, it is also possible to create a dummy main program which depends upon all the packages that comprise the interface of the library. This dummy main program can then be given to `gnatmake`, which will ensure that all necessary objects are built.

After this task is accomplished, you should follow the standard procedure of the underlying operating system to produce the static or shared library.

Here is an example of such a dummy program:

         with My_Lib.Service1;
         with My_Lib.Service2;
         with My_Lib.Service3;
         procedure My_Lib_Dummy is
         begin
            null;
         end;

Here are the generic commands that will build an archive or a shared library.

         # compiling the library
         $ gnatmake -c my_lib_dummy.adb

         # we don't need the dummy object itself
         $ rm my_lib_dummy.o my_lib_dummy.ali

         # create an archive with the remaining objects
         $ ar rc libmy_lib.a *.o
         # some systems may require "ranlib" to be run as well

         # or create a shared library
         $ gcc -shared -o libmy_lib.so *.o
         # some systems may require the code to have been compiled with -fPIC

         # remove the object files that are now in the library
         $ rm *.o

         # Make the ALI files read-only so that gnatmake will not try to
         # regenerate the objects that are in the library
         $ chmod -w *.ali

Please note that the library must have a name of the form `libxxx.a` or `libxxx.so` (or `libxxx.dll` on Windows) in order to be accessed by the directive `-lxxx` at link time.

Next: Using a library, Previous: Building a library, Up: General Ada Libraries

#### 20.2.2 Installing a library

If you use project files, library installation is part of the library build process (see Installing a library with project files).

When project files are not an option, it is also possible, but not recommended, to install the library so that the sources needed to use the library are on the Ada source path and the ALI files & libraries be on the Ada Object path (see Search Paths and the Run-Time Library (RTL). Alternatively, the system administrator can place general-purpose libraries in the default compiler paths, by specifying the libraries' location in the configuration files `ada_source_path` and `ada_object_path`. These configuration files must be located in the GNAT installation tree at the same place as the gcc spec file. The location of the gcc spec file can be determined as follows:

         $ gcc -v

The configuration files mentioned above have a simple format: each line must contain one unique directory name. Those names are added to the corresponding path in their order of appearance in the file. The names can be either absolute or relative; in the latter case, they are relative to where theses files are located.

The files `ada_source_path` and `ada_object_path` might not be present in a GNAT installation, in which case, GNAT will look for its run-time library in the directories `adainclude` (for the sources) and `adalib` (for the objects and `ALI` files). When the files exist, the compiler does not look in `adainclude` and `adalib`, and thus the `ada_source_path` file must contain the location for the GNAT run-time sources (which can simply be `adainclude`). In the same way, the `ada_object_path` file must contain the location for the GNAT run-time objects (which can simply be `adalib`).

You can also specify a new default path to the run-time library at compilation time with the switch `--RTS=rts-path`. You can thus choose / change the run-time library you want your program to be compiled with. This switch is recognized by `gcc`, `gnatmake`, `gnatbind`, `gnatls`, `gnatfind` and `gnatxref`.

It is possible to install a library before or after the standard GNAT library, by reordering the lines in the configuration files. In general, a library must be installed before the GNAT library if it redefines any part of it.

Previous: Installing a library, Up: General Ada Libraries

#### 20.2.3 Using a library

Once again, the project facility greatly simplifies the use of libraries. In this context, using a library is just a matter of adding a `with` clause in the user project. For instance, to make use of the library `My_Lib` shown in examples in earlier sections, you can write:

         with "my_lib";
         project My_Proj is
           ...
         end My_Proj;

Even if you have a third-party, non-Ada library, you can still use GNAT's Project Manager facility to provide a wrapper for it. For example, the following project, when `with`ed by your main project, will link with the third-party library `liba.a`:

         project Liba is
            for Externally_Built use "true";
            for Source_Files use ();
            for Library_Dir use "lib";
            for Library_Name use "a";
            for Library_Kind use "static";
         end Liba;

This is an alternative to the use of `pragma Linker_Options`. It is especially interesting in the context of systems with several interdependent static libraries where finding a proper linker order is not easy and best be left to the tools having visibility over project dependence information.

In order to use an Ada library manually, you need to make sure that this library is on both your source and object path (see Search Paths and the Run-Time Library (RTL) and Search Paths for gnatbind). Furthermore, when the objects are grouped in an archive or a shared library, you need to specify the desired library at link time.

For example, you can use the library `mylib` installed in `/dir/my_lib_src` and `/dir/my_lib_obj` with the following commands:

         $ gnatmake -aI/dir/my_lib_src -aO/dir/my_lib_obj my_appl \
           -largs -lmy_lib

This can be expressed more simply:

         $ gnatmake my_appl

when the following conditions are met:

- `/dir/my_lib_src` has been added by the user to the environment variable `ADA_INCLUDE_PATH`, or by the administrator to the file `ada_source_path`
- `/dir/my_lib_obj` has been added by the user to the environment variable `ADA_OBJECTS_PATH`, or by the administrator to the file `ada_object_path`
- a pragma `Linker_Options` has been added to one of the sources. For example:

                pragma Linker_Options ("-lmy_lib");

Next: Rebuilding the GNAT Run-Time Library, Previous: General Ada Libraries, Up: GNAT and Libraries

### 20.3 Stand-alone Ada Libraries

Next: Building a Stand-alone Library, Up: Stand-alone Ada Libraries

#### 20.3.1 Introduction to Stand-alone Libraries

A Stand-alone Library (abbreviated “SAL”) is a library that contains the necessary code to elaborate the Ada units that are included in the library. In contrast with an ordinary library, which consists of all sources, objects and `ALI` files of the library, a SAL may specify a restricted subset of compilation units to serve as a library interface. In this case, the fully self-sufficient set of files will normally consist of an objects archive, the sources of interface units' specs, and the `ALI` files of interface units. If an interface spec contains a generic unit or an inlined subprogram, the body's source must also be provided; if the units that must be provided in the source form depend on other units, the source and `ALI` files of those must also be provided.

The main purpose of a SAL is to minimize the recompilation overhead of client applications when a new version of the library is installed. Specifically, if the interface sources have not changed, client applications do not need to be recompiled. If, furthermore, a SAL is provided in the shared form and its version, controlled by `Library_Version` attribute, is not changed, then the clients do not need to be relinked.

SALs also allow the library providers to minimize the amount of library source text exposed to the clients. Such “information hiding” might be useful or necessary for various reasons.

Stand-alone libraries are also well suited to be used in an executable whose main routine is not written in Ada.

Next: Creating a Stand-alone Library to be used in a non-Ada context, Previous: Introduction to Stand-alone Libraries, Up: Stand-alone Ada Libraries

#### 20.3.2 Building a Stand-alone Library

GNAT's Project facility provides a simple way of building and installing stand-alone libraries; see Stand-alone Library Projects. To be a Stand-alone Library Project, in addition to the two attributes that make a project a Library Project (`Library_Name` and `Library_Dir`; see Library Projects), the attribute `Library_Interface` must be defined. For example:

            for Library_Dir use "lib_dir";
            for Library_Name use "dummy";
            for Library_Interface use ("int1", "int1.child");

Attribute `Library_Interface` has a non-empty string list value, each string in the list designating a unit contained in an immediate source of the project file.

When a Stand-alone Library is built, first the binder is invoked to build a package whose name depends on the library name (`b~dummy.ads/b` in the example above). This binder-generated package includes initialization and finalization procedures whose names depend on the library name (`dummyinit` and `dummyfinal` in the example above). The object corresponding to this package is included in the library.

You must ensure timely (e.g., prior to any use of interfaces in the SAL) calling of these procedures if a static SAL is built, or if a shared SAL is built with the project-level attribute `Library_Auto_Init` set to `"false"`.

For a Stand-Alone Library, only the `ALI` files of the Interface Units (those that are listed in attribute `Library_Interface`) are copied to the Library Directory. As a consequence, only the Interface Units may be imported from Ada units outside of the library. If other units are imported, the binding phase will fail.

It is also possible to build an encapsulated library where not only the code to elaborate and finalize the library is embedded but also ensuring that the library is linked only against static libraries. So an encapsulated library only depends on system libraries, all other code, including the GNAT runtime, is embedded. To build an encapsulated library the attribute `Library_Standalone` must be set to `encapsulated`:

            for Library_Dir use "lib_dir";
            for Library_Name use "dummy";
            for Library_Interface use ("int1", "int1.child");
            for Library_Standalone use "encapsulated";

The default value for this attribute is `standard` in which case a stand-alone library is built.

The attribute `Library_Src_Dir` may be specified for a Stand-Alone Library. `Library_Src_Dir` is a simple attribute that has a single string value. Its value must be the path (absolute or relative to the project directory) of an existing directory. This directory cannot be the object directory or one of the source directories, but it can be the same as the library directory. The sources of the Interface Units of the library that are needed by an Ada client of the library will be copied to the designated directory, called the Interface Copy directory. These sources include the specs of the Interface Units, but they may also include bodies and subunits, when pragmas `Inline` or `Inline_Always` are used, or when there is a generic unit in the spec. Before the sources are copied to the Interface Copy directory, an attempt is made to delete all files in the Interface Copy directory.

Building stand-alone libraries by hand is somewhat tedious, but for those occasions when it is necessary here are the steps that you need to perform:

- Compile all library sources.
- Invoke the binder with the switch `-n` (No Ada main program), with all the `ALI` files of the interfaces, and with the switch `-L` to give specific names to the `init` and `final` procedures. For example:

                  gnatbind -n int1.ali int2.ali -Lsal1

- Compile the binder generated file:

                  gcc -c b~int2.adb

- Link the dynamic library with all the necessary object files, indicating to the linker the names of the `init` (and possibly `final`) procedures for automatic initialization (and finalization). The built library should be placed in a directory different from the object directory.
- Copy the `ALI` files of the interface to the library directory, add in this copy an indication that it is an interface to a SAL (i.e., add a word `SL` on the line in the `ALI` file that starts with letter “P”) and make the modified copy of the `ALI` file read-only.

Using SALs is not different from using other libraries (see Using a library).

Next: Restrictions in Stand-alone Libraries, Previous: Building a Stand-alone Library, Up: Stand-alone Ada Libraries

#### 20.3.3 Creating a Stand-alone Library to be used in a non-Ada context

It is easy to adapt the SAL build procedure discussed above for use of a SAL in a non-Ada context.

The only extra step required is to ensure that library interface subprograms are compatible with the main program, by means of `pragma Export` or `pragma Convention`.

Here is an example of simple library interface for use with C main program:

         package My_Package is

            procedure Do_Something;
            pragma Export (C, Do_Something, "do_something");

            procedure Do_Something_Else;
            pragma Export (C, Do_Something_Else, "do_something_else");

         end My_Package;

On the foreign language side, you must provide a “foreign” view of the library interface; remember that it should contain elaboration routines in addition to interface subprograms.

The example below shows the content of `mylib_interface.h` (note that there is no rule for the naming of this file, any name can be used)

         /* the library elaboration procedure */
         extern void mylibinit (void);

         /* the library finalization procedure */
         extern void mylibfinal (void);

         /* the interface exported by the library */
         extern void do_something (void);
         extern void do_something_else (void);

Libraries built as explained above can be used from any program, provided that the elaboration procedures (named `mylibinit` in the previous example) are called before the library services are used. Any number of libraries can be used simultaneously, as long as the elaboration procedure of each library is called.

Below is an example of a C program that uses the `mylib` library.

         #include "mylib_interface.h"

         int
         main (void)
         {
            /* First, elaborate the library before using it */
            mylibinit ();

            /* Main program, using the library exported entities */
            do_something ();
            do_something_else ();

            /* Library finalization at the end of the program */
            mylibfinal ();
            return 0;
         }

Note that invoking any library finalization procedure generated by `gnatbind` shuts down the Ada run-time environment. Consequently, the finalization of all Ada libraries must be performed at the end of the program. No call to these libraries or to the Ada run-time library should be made after the finalization phase.

Previous: Creating a Stand-alone Library to be used in a non-Ada context, Up: Stand-alone Ada Libraries

#### 20.3.4 Restrictions in Stand-alone Libraries

The pragmas listed below should be used with caution inside libraries, as they can create incompatibilities with other Ada libraries:

- pragma `Locking_Policy`
- pragma `Queuing_Policy`
- pragma `Task_Dispatching_Policy`
- pragma `Unreserve_All_Interrupts`

When using a library that contains such pragmas, the user must make sure that all libraries use the same pragmas with the same values. Otherwise, `Program_Error` will be raised during the elaboration of the conflicting libraries. The usage of these pragmas and its consequences for the user should therefore be well documented.

Similarly, the traceback in the exception occurrence mechanism should be enabled or disabled in a consistent manner across all libraries. Otherwise, Program_Error will be raised during the elaboration of the conflicting libraries.

If the `Version` or `Body_Version` attributes are used inside a library, then you need to perform a `gnatbind` step that specifies all `ALI` files in all libraries, so that version identifiers can be properly computed. In practice these attributes are rarely used, so this is unlikely to be a consideration.

Previous: Stand-alone Ada Libraries, Up: GNAT and Libraries

### 20.4 Rebuilding the GNAT Run-Time Library

It may be useful to recompile the GNAT library in various contexts, the most important one being the use of partition-wide configuration pragmas such as `Normalize_Scalars`. A special Makefile called `Makefile.adalib` is provided to that effect and can be found in the directory containing the GNAT library. The location of this directory depends on the way the GNAT environment has been installed and can be determined by means of the command:

         $ gnatls -v

The last entry in the object search path usually contains the gnat library. This Makefile contains its own documentation and in particular the set of instructions needed to rebuild a new library and to use it.

Next: Memory Management Issues, Previous: GNAT and Libraries, Up: Top

## 21 Using the GNU `make` Utility

This chapter offers some examples of makefiles that solve specific problems. It does not explain how to write a makefile (see GNU make), nor does it try to replace the `gnatmake` utility (see The GNAT Make Program gnatmake).

All the examples in this section are specific to the GNU version of make. Although `make` is a standard utility, and the basic language is the same, these examples use some advanced features found only in `GNU make`.

Next: Automatically Creating a List of Directories, Up: Using the GNU make Utility

### 21.1 Using gnatmake in a Makefile

Complex project organizations can be handled in a very powerful way by using GNU make combined with gnatmake. For instance, here is a Makefile which allows you to build each subsystem of a big project into a separate shared library. Such a makefile allows you to significantly reduce the link time of very big applications while maintaining full coherence at each step of the build process.

The list of dependencies are handled automatically by `gnatmake`. The Makefile is simply used to call gnatmake in each of the appropriate directories.

Note that you should also read the example on how to automatically create the list of directories (see Automatically Creating a List of Directories) which might help you in case your project has a lot of subdirectories.

         ## This Makefile is intended to be used with the following directory
         ## configuration:
         ##  - The sources are split into a series of csc (computer software components)
         ##    Each of these csc is put in its own directory.
         ##    Their name are referenced by the directory names.
         ##    They will be compiled into shared library (although this would also work
         ##    with static libraries
         ##  - The main program (and possibly other packages that do not belong to any
         ##    csc is put in the top level directory (where the Makefile is).
         ##       toplevel_dir __ first_csc  (sources) __ lib (will contain the library)
         ##                    \_ second_csc (sources) __ lib (will contain the library)
         ##                    \_ ...
         ## Although this Makefile is build for shared library, it is easy to modify
         ## to build partial link objects instead (modify the lines with -shared and
         ## gnatlink below)
         ##
         ## With this makefile, you can change any file in the system or add any new
         ## file, and everything will be recompiled correctly (only the relevant shared
         ## objects will be recompiled, and the main program will be re-linked).

         # The list of computer software component for your project. This might be
         # generated automatically.
         CSC_LIST=aa bb cc

         # Name of the main program (no extension)
         MAIN=main

         # If we need to build objects with -fPIC, uncomment the following line
         #NEED_FPIC=-fPIC

         # The following variable should give the directory containing libgnat.so
         # You can get this directory through 'gnatls -v'. This is usually the last
         # directory in the Object_Path.
         GLIB=...

         # The directories for the libraries
         # (This macro expands the list of CSC to the list of shared libraries, you
         # could simply use the expanded form:
         # LIB_DIR=aa/lib/libaa.so bb/lib/libbb.so cc/lib/libcc.so
         LIB_DIR=${foreach dir,${CSC_LIST},${dir}/lib/lib${dir}.so}

         ${MAIN}: objects ${LIB_DIR}
             gnatbind ${MAIN} ${CSC_LIST:%=-aO%/lib} -shared
             gnatlink ${MAIN} ${CSC_LIST:%=-l%}

         objects::
             # recompile the sources
             gnatmake -c -i ${MAIN}.adb ${NEED_FPIC} ${CSC_LIST:%=-I%}

         # Note: In a future version of GNAT, the following commands will be simplified
         # by a new tool, gnatmlib
         ${LIB_DIR}:
             mkdir -p ${dir $@ }
             cd ${dir $@ } && gcc -shared -o ${notdir $@ } ../*.o -L${GLIB} -lgnat
             cd ${dir $@ } && cp -f ../*.ali .

         # The dependencies for the modules
         # Note that we have to force the expansion of *.o, since in some cases
         # make won't be able to do it itself.
         aa/lib/libaa.so: ${wildcard aa/*.o}
         bb/lib/libbb.so: ${wildcard bb/*.o}
         cc/lib/libcc.so: ${wildcard cc/*.o}

         # Make sure all of the shared libraries are in the path before starting the
         # program
         run::
             LD_LIBRARY_PATH=`pwd`/aa/lib:`pwd`/bb/lib:`pwd`/cc/lib ./${MAIN}

         clean::
             ${RM} -rf ${CSC_LIST:%=%/lib}
             ${RM} ${CSC_LIST:%=%/*.ali}
             ${RM} ${CSC_LIST:%=%/*.o}
             ${RM} *.o *.ali ${MAIN}

Next: Generating the Command Line Switches, Previous: Using gnatmake in a Makefile, Up: Using the GNU make Utility

### 21.2 Automatically Creating a List of Directories

In most makefiles, you will have to specify a list of directories, and store it in a variable. For small projects, it is often easier to specify each of them by hand, since you then have full control over what is the proper order for these directories, which ones should be included.

However, in larger projects, which might involve hundreds of subdirectories, it might be more convenient to generate this list automatically.

The example below presents two methods. The first one, although less general, gives you more control over the list. It involves wildcard characters, that are automatically expanded by `make`. Its shortcoming is that you need to explicitly specify some of the organization of your project, such as for instance the directory tree depth, whether some directories are found in a separate tree, ...

The second method is the most general one. It requires an external program, called `find`, which is standard on all Unix systems. All the directories found under a given root directory will be added to the list.

         # The examples below are based on the following directory hierarchy:
         # All the directories can contain any number of files
         # ROOT_DIRECTORY ->  a  ->  aa  ->  aaa
         #                       ->  ab
         #                       ->  ac
         #                ->  b  ->  ba  ->  baa
         #                       ->  bb
         #                       ->  bc
         # This Makefile creates a variable called DIRS, that can be reused any time
         # you need this list (see the other examples in this section)

         # The root of your project's directory hierarchy
         ROOT_DIRECTORY=.

         ####
         # First method: specify explicitly the list of directories
         # This allows you to specify any subset of all the directories you need.
         ####

         DIRS := a/aa/ a/ab/ b/ba/

         ####
         # Second method: use wildcards
         # Note that the argument(s) to wildcard below should end with a '/'.
         # Since wildcards also return file names, we have to filter them out
         # to avoid duplicate directory names.
         # We thus use make's dir and sort functions.
         # It sets DIRs to the following value (note that the directories aaa and baa
         # are not given, unless you change the arguments to wildcard).
         # DIRS= ./a/a/ ./b/ ./a/aa/ ./a/ab/ ./a/ac/ ./b/ba/ ./b/bb/ ./b/bc/
         ####

         DIRS := ${sort ${dir ${wildcard ${ROOT_DIRECTORY}/*/
                             ${ROOT_DIRECTORY}/*/*/}}}

         ####
         # Third method: use an external program
         # This command is much faster if run on local disks, avoiding NFS slowdowns.
         # This is the most complete command: it sets DIRs to the following value:
         # DIRS= ./a ./a/aa ./a/aa/aaa ./a/ab ./a/ac ./b ./b/ba ./b/ba/baa ./b/bb ./b/bc
         ####

         DIRS := ${shell find ${ROOT_DIRECTORY} -type d -print}

Next: Overcoming Command Line Length Limits, Previous: Automatically Creating a List of Directories, Up: Using the GNU make Utility

### 21.3 Generating the Command Line Switches

Once you have created the list of directories as explained in the previous section (see Automatically Creating a List of Directories), you can easily generate the command line arguments to pass to gnatmake.

For the sake of completeness, this example assumes that the source path is not the same as the object path, and that you have two separate lists of directories.

         # see "Automatically creating a list of directories" to create
         # these variables
         SOURCE_DIRS=
         OBJECT_DIRS=

         GNATMAKE_SWITCHES := ${patsubst %,-aI%,${SOURCE_DIRS}}
         GNATMAKE_SWITCHES += ${patsubst %,-aO%,${OBJECT_DIRS}}

         all:
                 gnatmake ${GNATMAKE_SWITCHES} main_unit

Previous: Generating the Command Line Switches, Up: Using the GNU make Utility

### 21.4 Overcoming Command Line Length Limits

One problem that might be encountered on big projects is that many operating systems limit the length of the command line. It is thus hard to give gnatmake the list of source and object directories.

This example shows how you can set up environment variables, which will make `gnatmake` behave exactly as if the directories had been specified on the command line, but have a much higher length limit (or even none on most systems).

It assumes that you have created a list of directories in your Makefile, using one of the methods presented in Automatically Creating a List of Directories. For the sake of completeness, we assume that the object path (where the ALI files are found) is different from the sources patch.

Note a small trick in the Makefile below: for efficiency reasons, we create two temporary variables (SOURCE_LIST and OBJECT_LIST), that are expanded immediately by `make`. This way we overcome the standard make behavior which is to expand the variables only when they are actually used.

On Windows, if you are using the standard Windows command shell, you must replace colons with semicolons in the assignments to these variables.

         # In this example, we create both ADA_INCLUDE_PATH and ADA_OBJECTS_PATH.
         # This is the same thing as putting the -I arguments on the command line.
         # (the equivalent of using -aI on the command line would be to define
         #  only ADA_INCLUDE_PATH, the equivalent of -aO is ADA_OBJECTS_PATH).
         # You can of course have different values for these variables.
         #
         # Note also that we need to keep the previous values of these variables, since
         # they might have been set before running 'make' to specify where the GNAT
         # library is installed.

         # see "Automatically creating a list of directories" to create these
         # variables
         SOURCE_DIRS=
         OBJECT_DIRS=

         empty:=
         space:=${empty} ${empty}
         SOURCE_LIST := ${subst ${space},:,${SOURCE_DIRS}}
         OBJECT_LIST := ${subst ${space},:,${OBJECT_DIRS}}
         ADA_INCLUDE_PATH += ${SOURCE_LIST}
         ADA_OBJECTS_PATH += ${OBJECT_LIST}
         export ADA_INCLUDE_PATH
         export ADA_OBJECTS_PATH

         all:
                 gnatmake main_unit

Next: Stack Related Facilities, Previous: Using the GNU make Utility, Up: Top

## 22 Memory Management Issues

This chapter describes some useful memory pools provided in the GNAT library and in particular the GNAT Debug Pool facility, which can be used to detect incorrect uses of access values (including “dangling references”). It also describes the `gnatmem` tool, which can be used to track down “memory leaks”.

Next: The GNAT Debug Pool Facility, Up: Memory Management Issues

### 22.1 Some Useful Memory Pools

The `System.Pool_Global` package offers the Unbounded_No_Reclaim_Pool storage pool. Allocations use the standard system call `malloc` while deallocations use the standard system call `free`. No reclamation is performed when the pool goes out of scope. For performance reasons, the standard default Ada allocators/deallocators do not use any explicit storage pools but if they did, they could use this storage pool without any change in behavior. That is why this storage pool is used when the user manages to make the default implicit allocator explicit as in this example:

            type T1 is access Something;
             -- no Storage pool is defined for T2
            type T2 is access Something_Else;
            for T2'Storage_Pool use T1'Storage_Pool;
            -- the above is equivalent to
            for T2'Storage_Pool use System.Pool_Global.Global_Pool_Object;

The `System.Pool_Local` package offers the Unbounded_Reclaim_Pool storage pool. The allocation strategy is similar to `Pool_Local`'s except that the all storage allocated with this pool is reclaimed when the pool object goes out of scope. This pool provides a explicit mechanism similar to the implicit one provided by several Ada 83 compilers for allocations performed through a local access type and whose purpose was to reclaim memory when exiting the scope of a given local access. As an example, the following program does not leak memory even though it does not perform explicit deallocation:

         with System.Pool_Local;
         procedure Pooloc1 is
            procedure Internal is
               type A is access Integer;
               X : System.Pool_Local.Unbounded_Reclaim_Pool;
               for A'Storage_Pool use X;
               v : A;
            begin
               for I in  1 .. 50 loop
                  v := new Integer;
               end loop;
            end Internal;
         begin
            for I in  1 .. 100 loop
               Internal;
            end loop;
         end Pooloc1;

The `System.Pool_Size` package implements the Stack_Bounded_Pool used when `Storage_Size` is specified for an access type. The whole storage for the pool is allocated at once, usually on the stack at the point where the access type is elaborated. It is automatically reclaimed when exiting the scope where the access type is defined. This package is not intended to be used directly by the user and it is implicitly used for each such declaration:

            type T1 is access Something;
            for T1'Storage_Size use 10_000;

Next: The gnatmem Tool, Previous: Some Useful Memory Pools, Up: Memory Management Issues

### 22.2 The GNAT Debug Pool Facility

The use of unchecked deallocation and unchecked conversion can easily lead to incorrect memory references. The problems generated by such references are usually difficult to tackle because the symptoms can be very remote from the origin of the problem. In such cases, it is very helpful to detect the problem as early as possible. This is the purpose of the Storage Pool provided by `GNAT.Debug_Pools`.

In order to use the GNAT specific debugging pool, the user must associate a debug pool object with each of the access types that may be related to suspected memory problems. See Ada Reference Manual 13.11.

         type Ptr is access Some_Type;
         Pool : GNAT.Debug_Pools.Debug_Pool;
         for Ptr'Storage_Pool use Pool;

`GNAT.Debug_Pools` is derived from a GNAT-specific kind of pool: the `Checked_Pool`. Such pools, like standard Ada storage pools, allow the user to redefine allocation and deallocation strategies. They also provide a checkpoint for each dereference, through the use of the primitive operation `Dereference` which is implicitly called at each dereference of an access value.

Once an access type has been associated with a debug pool, operations on values of the type may raise four distinct exceptions, which correspond to four potential kinds of memory corruption:

- `GNAT.Debug_Pools.Accessing_Not_Allocated_Storage`
- `GNAT.Debug_Pools.Accessing_Deallocated_Storage`
- `GNAT.Debug_Pools.Freeing_Not_Allocated_Storage`
- `GNAT.Debug_Pools.Freeing_Deallocated_Storage`

For types associated with a Debug_Pool, dynamic allocation is performed using the standard GNAT allocation routine. References to all allocated chunks of memory are kept in an internal dictionary. Several deallocation strategies are provided, whereupon the user can choose to release the memory to the system, keep it allocated for further invalid access checks, or fill it with an easily recognizable pattern for debug sessions. The memory pattern is the old IBM hexadecimal convention: `16#DEADBEEF#`.

See the documentation in the file g-debpoo.ads for more information on the various strategies.

Upon each dereference, a check is made that the access value denotes a properly allocated memory location. Here is a complete example of use of `Debug_Pools`, that includes typical instances of memory corruption:

         with Gnat.Io; use Gnat.Io;
         with Unchecked_Deallocation;
         with Unchecked_Conversion;
         with GNAT.Debug_Pools;
         with System.Storage_Elements;
         with Ada.Exceptions; use Ada.Exceptions;
         procedure Debug_Pool_Test is

            type T is access Integer;
            type U is access all T;

            P : GNAT.Debug_Pools.Debug_Pool;
            for T'Storage_Pool use P;

            procedure Free is new Unchecked_Deallocation (Integer, T);
            function UC is new Unchecked_Conversion (U, T);
            A, B : aliased T;

            procedure Info is new GNAT.Debug_Pools.Print_Info(Put_Line);

         begin
            Info (P);
            A := new Integer;
            B := new Integer;
            B := A;
            Info (P);
            Free (A);
            begin
               Put_Line (Integer'Image(B.all));
            exception
               when E : others => Put_Line ("raised: " & Exception_Name (E));
            end;
            begin
               Free (B);
            exception
               when E : others => Put_Line ("raised: " & Exception_Name (E));
            end;
            B := UC(A'Access);
            begin
               Put_Line (Integer'Image(B.all));
            exception
               when E : others => Put_Line ("raised: " & Exception_Name (E));
            end;
            begin
               Free (B);
            exception
               when E : others => Put_Line ("raised: " & Exception_Name (E));
            end;
            Info (P);
         end Debug_Pool_Test;

The debug pool mechanism provides the following precise diagnostics on the execution of this erroneous program:

         Debug Pool info:
           Total allocated bytes :  0
           Total deallocated bytes :  0
           Current Water Mark:  0
           High Water Mark:  0

         Debug Pool info:
           Total allocated bytes :  8
           Total deallocated bytes :  0
           Current Water Mark:  8
           High Water Mark:  8

         raised: GNAT.DEBUG_POOLS.ACCESSING_DEALLOCATED_STORAGE
         raised: GNAT.DEBUG_POOLS.FREEING_DEALLOCATED_STORAGE
         raised: GNAT.DEBUG_POOLS.ACCESSING_NOT_ALLOCATED_STORAGE
         raised: GNAT.DEBUG_POOLS.FREEING_NOT_ALLOCATED_STORAGE
         Debug Pool info:
           Total allocated bytes :  8
           Total deallocated bytes :  4
           Current Water Mark:  4
           High Water Mark:  8

Previous: The GNAT Debug Pool Facility, Up: Memory Management Issues

### 22.3 The `gnatmem` Tool

The `gnatmem` utility monitors dynamic allocation and deallocation activity in a program, and displays information about incorrect deallocations and possible sources of memory leaks. It is designed to work in association with a static runtime library only and in this context provides three types of information:

- General information concerning memory management, such as the total number of allocations and deallocations, the amount of allocated memory and the high water mark, i.e. the largest amount of allocated memory in the course of program execution.
- Backtraces for all incorrect deallocations, that is to say deallocations which do not correspond to a valid allocation.
- Information on each allocation that is potentially the origin of a memory leak.

Next: Switches for gnatmem, Up: The gnatmem Tool

#### 22.3.1 Running `gnatmem`

`gnatmem` makes use of the output created by the special version of allocation and deallocation routines that record call information. This allows to obtain accurate dynamic memory usage history at a minimal cost to the execution speed. Note however, that `gnatmem` is not supported on all platforms (currently, it is supported on AIX, HP-UX, GNU/Linux, Solaris and Windows NT/2000/XP (x86).

The `gnatmem` command has the form

               $ gnatmem [switches] user_program

The program must have been linked with the instrumented version of the allocation and deallocation routines. This is done by linking with the `libgmem.a` library. For correct symbolic backtrace information, the user program should be compiled with debugging options (see Switches for gcc). For example to build `my_program`:

         $ gnatmake -g my_program -largs -lgmem

As library `libgmem.a` contains an alternate body for package `System.Memory`, `s-memory.adb` should not be compiled and linked when an executable is linked with library `libgmem.a`. It is then not recommended to use `gnatmake` with switch `-a`.

When `my_program` is executed, the file `gmem.out` is produced. This file contains information about all allocations and deallocations performed by the program. It is produced by the instrumented allocations and deallocations routines and will be used by `gnatmem`.

In order to produce symbolic backtrace information for allocations and deallocations performed by the GNAT run-time library, you need to use a version of that library that has been compiled with the `-g` switch (see Rebuilding the GNAT Run-Time Library).

Gnatmem must be supplied with the `gmem.out` file and the executable to examine. If the location of `gmem.out` file was not explicitly supplied by `-i` switch, gnatmem will assume that this file can be found in the current directory. For example, after you have executed `my_program`, `gmem.out` can be analyzed by `gnatmem` using the command:

         $ gnatmem my_program

This will produce the output with the following format:

*************** debut cc

         $ gnatmem my_program

         Global information
         ------------------
            Total number of allocations        :  45
            Total number of deallocations      :   6
            Final Water Mark (non freed mem)   :  11.29 Kilobytes
            High Water Mark                    :  11.40 Kilobytes

         .
         .
         .
         Allocation Root # 2
         -------------------
          Number of non freed allocations    :  11
          Final Water Mark (non freed mem)   :   1.16 Kilobytes
          High Water Mark                    :   1.27 Kilobytes
          Backtrace                          :
            my_program.adb:23 my_program.alloc
         .
         .
         .

The first block of output gives general information. In this case, the Ada construct “new” was executed 45 times, and only 6 calls to an Unchecked_Deallocation routine occurred.

Subsequent paragraphs display information on all allocation roots. An allocation root is a specific point in the execution of the program that generates some dynamic allocation, such as a “new” construct. This root is represented by an execution backtrace (or subprogram call stack). By default the backtrace depth for allocations roots is 1, so that a root corresponds exactly to a source location. The backtrace can be made deeper, to make the root more specific.

Next: Example of gnatmem Usage, Previous: Running gnatmem, Up: The gnatmem Tool

#### 22.3.2 Switches for `gnatmem`

`gnatmem` recognizes the following switches:

`-q`
  Quiet. Gives the minimum output needed to identify the origin of the memory leaks. Omits statistical information.
`N`
  N is an integer literal (usually between 1 and 10) which controls the depth of the backtraces defining allocation root. The default value for N is 1. The deeper the backtrace, the more precise the localization of the root. Note that the total number of roots can depend on this parameter. This parameter must be specified before the name of the executable to be analyzed, to avoid ambiguity.
`-b n`
  This switch has the same effect as just depth parameter.
`-i file`
  Do the `gnatmem` processing starting from `file`, rather than `gmem.out` in the current directory.
`-m n`
  This switch causes `gnatmem` to mask the allocation roots that have less than n leaks. The default value is 1. Specifying the value of 0 will allow to examine even the roots that didn't result in leaks.
`-s order`
  This switch causes `gnatmem` to sort the allocation roots according to the specified order of sort criteria, each identified by a single letter. The currently supported criteria are `n, h, w` standing respectively for number of unfreed allocations, high watermark, and final watermark corresponding to a specific root. The default order is `nwh`.

Previous: Switches for gnatmem, Up: The gnatmem Tool

#### 22.3.3 Example of `gnatmem` Usage

The following example shows the use of `gnatmem` on a simple memory-leaking program. Suppose that we have the following Ada program:

         with Unchecked_Deallocation;
         procedure Test_Gm is

            type T is array (1..1000) of Integer;
            type Ptr is access T;
            procedure Free is new Unchecked_Deallocation (T, Ptr);
            A : Ptr;

            procedure My_Alloc is
            begin
               A := new T;
            end My_Alloc;

            procedure My_DeAlloc is
               B : Ptr := A;
            begin
               Free (B);
            end My_DeAlloc;

         begin
            My_Alloc;
            for I in 1 .. 5 loop
               for J in I .. 5 loop
                  My_Alloc;
               end loop;
               My_Dealloc;
            end loop;
         end;

The program needs to be compiled with debugging option and linked with `gmem` library:

         $ gnatmake -g test_gm -largs -lgmem

Then we execute the program as usual:

         $ test_gm

Then `gnatmem` is invoked simply with

         $ gnatmem test_gm

which produces the following output (result may vary on different platforms):

         Global information
         ------------------
            Total number of allocations        :  18
            Total number of deallocations      :   5
            Final Water Mark (non freed mem)   :  53.00 Kilobytes
            High Water Mark                    :  56.90 Kilobytes

         Allocation Root # 1
         -------------------
          Number of non freed allocations    :  11
          Final Water Mark (non freed mem)   :  42.97 Kilobytes
          High Water Mark                    :  46.88 Kilobytes
          Backtrace                          :
            test_gm.adb:11 test_gm.my_alloc

         Allocation Root # 2
         -------------------
          Number of non freed allocations    :   1
          Final Water Mark (non freed mem)   :  10.02 Kilobytes
          High Water Mark                    :  10.02 Kilobytes
          Backtrace                          :
            s-secsta.adb:81 system.secondary_stack.ss_init

         Allocation Root # 3
         -------------------
          Number of non freed allocations    :   1
          Final Water Mark (non freed mem)   :  12 Bytes
          High Water Mark                    :  12 Bytes
          Backtrace                          :
            s-secsta.adb:181 system.secondary_stack.ss_init

Note that the GNAT run time contains itself a certain number of allocations that have no corresponding deallocation, as shown here for root #2 and root #3. This is a normal behavior when the number of non-freed allocations is one, it allocates dynamic data structures that the run time needs for the complete lifetime of the program. Note also that there is only one allocation root in the user program with a single line back trace: test_gm.adb:11 test_gm.my_alloc, whereas a careful analysis of the program shows that 'My_Alloc' is called at 2 different points in the source (line 21 and line 24). If those two allocation roots need to be distinguished, the backtrace depth parameter can be used:

         $ gnatmem 3 test_gm

which will give the following output:

         Global information
         ------------------
            Total number of allocations        :  18
            Total number of deallocations      :   5
            Final Water Mark (non freed mem)   :  53.00 Kilobytes
            High Water Mark                    :  56.90 Kilobytes

         Allocation Root # 1
         -------------------
          Number of non freed allocations    :  10
          Final Water Mark (non freed mem)   :  39.06 Kilobytes
          High Water Mark                    :  42.97 Kilobytes
          Backtrace                          :
            test_gm.adb:11 test_gm.my_alloc
            test_gm.adb:24 test_gm
            b_test_gm.c:52 main

         Allocation Root # 2
         -------------------
          Number of non freed allocations    :   1
          Final Water Mark (non freed mem)   :  10.02 Kilobytes
          High Water Mark                    :  10.02 Kilobytes
          Backtrace                          :
            s-secsta.adb:81  system.secondary_stack.ss_init
            s-secsta.adb:283 <system__secondary_stack___elabb>
            b_test_gm.c:33   adainit

         Allocation Root # 3
         -------------------
          Number of non freed allocations    :   1
          Final Water Mark (non freed mem)   :   3.91 Kilobytes
          High Water Mark                    :   3.91 Kilobytes
          Backtrace                          :
            test_gm.adb:11 test_gm.my_alloc
            test_gm.adb:21 test_gm
            b_test_gm.c:52 main

         Allocation Root # 4
         -------------------
          Number of non freed allocations    :   1
          Final Water Mark (non freed mem)   :  12 Bytes
          High Water Mark                    :  12 Bytes
          Backtrace                          :
            s-secsta.adb:181 system.secondary_stack.ss_init
            s-secsta.adb:283 <system__secondary_stack___elabb>
            b_test_gm.c:33   adainit

The allocation root #1 of the first example has been split in 2 roots #1 and #3 thanks to the more precise associated backtrace.

Next: Verifying Properties Using gnatcheck, Previous: Memory Management Issues, Up: Top

## 23 Stack Related Facilities

This chapter describes some useful tools associated with stack checking and analysis. In particular, it deals with dynamic and static stack usage measurements.

Next: Static Stack Usage Analysis, Up: Stack Related Facilities

### 23.1 Stack Overflow Checking

For most operating systems, `gcc` does not perform stack overflow checking by default. This means that if the main environment task or some other task exceeds the available stack space, then unpredictable behavior will occur. Most native systems offer some level of protection by adding a guard page at the end of each task stack. This mechanism is usually not enough for dealing properly with stack overflow situations because a large local variable could “jump” above the guard page. Furthermore, when the guard page is hit, there may not be any space left on the stack for executing the exception propagation code. Enabling stack checking avoids such situations.

To activate stack checking, compile all units with the gcc option `-fstack-check`. For example:

         gcc -c -fstack-check package1.adb

Units compiled with this option will generate extra instructions to check that any use of the stack (for procedure calls or for declaring local variables in declare blocks) does not exceed the available stack space. If the space is exceeded, then a `Storage_Error` exception is raised.

For declared tasks, the stack size is controlled by the size given in an applicable `Storage_Size` pragma or by the value specified at bind time with `-d` (see Switches for gnatbind) or is set to the default size as defined in the GNAT runtime otherwise.

For the environment task, the stack size depends on system defaults and is unknown to the compiler. Stack checking may still work correctly if a fixed size stack is allocated, but this cannot be guaranteed. To ensure that a clean exception is signalled for stack overflow, set the environment variable `GNAT_STACK_LIMIT` to indicate the maximum stack area that can be used, as in:

         SET GNAT_STACK_LIMIT 1600

The limit is given in kilobytes, so the above declaration would set the stack limit of the environment task to 1.6 megabytes. Note that the only purpose of this usage is to limit the amount of stack used by the environment task. If it is necessary to increase the amount of stack for the environment task, then this is an operating systems issue, and must be addressed with the appropriate operating systems commands.

Next: Dynamic Stack Usage Analysis, Previous: Stack Overflow Checking, Up: Stack Related Facilities

### 23.2 Static Stack Usage Analysis

A unit compiled with `-fstack-usage` will generate an extra file that specifies the maximum amount of stack used, on a per-function basis. The file has the same basename as the target object file with a `.su` extension. Each line of this file is made up of three fields:

- The name of the function.
- A number of bytes.
- One or more qualifiers: `static`, `dynamic`, `bounded`.

The second field corresponds to the size of the known part of the function frame.

The qualifier `static` means that the function frame size is purely static. It usually means that all local variables have a static size. In this case, the second field is a reliable measure of the function stack utilization.

The qualifier `dynamic` means that the function frame size is not static. It happens mainly when some local variables have a dynamic size. When this qualifier appears alone, the second field is not a reliable measure of the function stack analysis. When it is qualified with `bounded`, it means that the second field is a reliable maximum of the function stack utilization.

A unit compiled with `-Wstack-usage` will issue a warning for each subprogram whose stack usage might be larger than the specified amount of bytes. The wording is in keeping with the qualifier documented above.

Previous: Static Stack Usage Analysis, Up: Stack Related Facilities

### 23.3 Dynamic Stack Usage Analysis

It is possible to measure the maximum amount of stack used by a task, by adding a switch to `gnatbind`, as:

         $ gnatbind -u0 file

With this option, at each task termination, its stack usage is output on `stderr`. It is not always convenient to output the stack usage when the program is still running. Hence, it is possible to delay this output until program termination. for a given number of tasks specified as the argument of the `-u` option. For instance:

         $ gnatbind -u100 file

will buffer the stack usage information of the first 100 tasks to terminate and output this info at program termination. Results are displayed in four columns:

Index | Task Name | Stack Size | Stack Usage

where:

Index
  is a number associated with each task.
Task Name
  is the name of the task analyzed.
Stack Size
  is the maximum size for the stack.
Stack Usage
  is the measure done by the stack analyzer. In order to prevent overflow, the stack is not entirely analyzed, and it's not possible to know exactly how much has actually been used.

The environment task stack, e.g., the stack that contains the main unit, is only processed when the environment variable GNAT_STACK_LIMIT is set.

The package `GNAT.Task_Stack_Usage` provides facilities to get stack usage reports at run-time. See its body for the details.

Next: Creating Sample Bodies Using gnatstub, Previous: Stack Related Facilities, Up: Top

## 24 Verifying Properties Using `gnatcheck`

The `gnatcheck` tool is an ASIS-based utility that checks properties of Ada source files according to a given set of semantic rules. In order to check compliance with a given rule, `gnatcheck` has to semantically analyze the Ada sources. Therefore, checks can only be performed on legal Ada units. Moreover, when a unit depends semantically upon units located outside the current directory, the source search path has to be provided when calling `gnatcheck`, either through a specified project file or through `gnatcheck` switches.

For full details, refer to GNATcheck Reference Manual document.

Next: Creating Unit Tests Using gnattest, Previous: Verifying Properties Using gnatcheck, Up: Top

## 25 Creating Sample Bodies Using `gnatstub`

`gnatstub` creates body stubs, that is, empty but compilable bodies for library unit declarations.

Note: to invoke `gnatstub` with a project file, use the `gnat` driver (see The GNAT Driver and Project Files).

To create a body stub, `gnatstub` has to compile the library unit declaration. Therefore, bodies can be created only for legal library units. Moreover, if a library unit depends semantically upon units located outside the current directory, you have to provide the source search path when calling `gnatstub`, see the description of `gnatstub` switches below.

By default, all the program unit body stubs generated by `gnatstub` raise the predefined `Program_Error` exception, which will catch accidental calls of generated stubs. This behavior can be changed with option `--no-exception` (see below).

Next: Switches for gnatstub, Up: Creating Sample Bodies Using gnatstub

### 25.1 Running `gnatstub`

`gnatstub` has a command-line interface of the form:

         $ gnatstub [switches] filename [directory] [-cargs gcc_switches]

where

filename
  is the name of the source file that contains a library unit declaration for which a body must be created. The file name may contain the path information. The file name does not have to follow the GNAT file name conventions. If the name does not follow GNAT file naming conventions, the name of the body file must be provided explicitly as the value of the `-obody-name` option. If the file name follows the GNAT file naming conventions and the name of the body file is not provided, `gnatstub` creates the name of the body file from the argument file name by replacing the `.ads` suffix with the `.adb` suffix.
directory
  indicates the directory in which the body stub is to be placed (the default is the current directory)
‘`gcc_switches`’ is a list of switches for
  `gcc`. They will be passed on to all compiler invocations made by `gnatstub` to generate the ASIS trees. Here you can provide `-I` switches to form the source search path, use the `-gnatec` switch to set the configuration file, use the `-gnat05` switch if sources should be compiled in Ada 2005 mode etc.
switches
  is an optional sequence of switches as described in the next section

Previous: Running gnatstub, Up: Creating Sample Bodies Using gnatstub

### 25.2 Switches for `gnatstub`

`-f`
  If the destination directory already contains a file with the name of the body file for the argument spec file, replace it with the generated body stub.
`-hs`
  Put the comment header (i.e., all the comments preceding the compilation unit) from the source of the library unit declaration into the body stub.
`-hg`
  Put a sample comment header into the body stub.
`--header-file=filename`
  Use the content of the file as the comment header for a generated body stub.
`-IDIR`
`-I-`
  These switches have the same meaning as in calls to `gcc`. They define the source search path in the call to `gcc` issued by `gnatstub` to compile an argument source file.
`-gnatecPATH`
  This switch has the same meaning as in calls to `gcc`. It defines the additional configuration file to be passed to the call to `gcc` issued by `gnatstub` to compile an argument source file.
`-gnatyMn`
  (n is a non-negative integer). Set the maximum line length in the body stub to n; the default is 79. The maximum value that can be specified is 32767. Note that in the special case of configuration pragma files, the maximum is always 32767 regardless of whether or not this switch appears.
`-gnatyn`
  (n is a non-negative integer from 1 to 9). Set the indentation level in the generated body sample to n. The default indentation is 3.
`-gnatyo`
  Order local bodies alphabetically. (By default local bodies are ordered in the same way as the corresponding local specs in the argument spec file.)
`-in`
  Same as `-gnatyn`
`-k`
  Do not remove the tree file (i.e., the snapshot of the compiler internal structures used by `gnatstub`) after creating the body stub.
`-ln`
  Same as `-gnatyMn`
`--no-exception`
  Avoid raising PROGRAM_ERROR in the generated bodies of program unit stubs. This is not always possible for function stubs.
`--no-local-header`
  Do not place local comment header with unit name before body stub for a unit.
`-o body-name`
  Body file name. This should be set if the argument file name does not follow the GNAT file naming conventions. If this switch is omitted the default name for the body will be obtained from the argument file name according to the GNAT file naming conventions.
`-q`
  Quiet mode: do not generate a confirmation when a body is successfully created, and do not generate a message when a body is not required for an argument unit.
`-r`
  Reuse the tree file (if it exists) instead of creating it. Instead of creating the tree file for the library unit declaration, `gnatstub` tries to find it in the current directory and use it for creating a body. If the tree file is not found, no body is created. This option also implies `-k`, whether or not the latter is set explicitly.
`-t`
  Overwrite the existing tree file. If the current directory already contains the file which, according to the GNAT file naming rules should be considered as a tree file for the argument source file, `gnatstub` will refuse to create the tree file needed to create a sample body unless this option is set.
`-v`
  Verbose mode: generate version information.

Next: Performing Dimensionality Analysis in GNAT, Previous: Creating Sample Bodies Using gnatstub, Up: Top

## 26 Creating Unit Tests Using `gnattest`

`gnattest` is an ASIS-based utility that creates unit-test skeletons as well as a test driver infrastructure (harness). `gnattest` creates a skeleton for each visible subprogram in the packages under consideration when they do not exist already.

In order to process source files from a project, `gnattest` has to semantically analyze the sources. Therefore, test skeletons can only be generated for legal Ada units. If a unit is dependent on other units, those units should be among the source files of the project or of other projects imported by this one.

Generated skeletons and harnesses are based on the AUnit testing framework. AUnit is an Ada adaptation of the xxxUnit testing frameworks, similar to JUnit for Java or CppUnit for C++. While it is advised that gnattest users read the AUnit manual, deep knowledge of AUnit is not necessary for using gnattest. For correct operation of `gnattest`, AUnit should be installed and aunit.gpr must be on the project path. This happens automatically when Aunit is installed at its default location.

Next: Switches for gnattest, Up: Creating Unit Tests Using gnattest

### 26.1 Running `gnattest`

`gnattest` has a command-line interface of the form

         $ gnattest -Pprojname [–harness-dir=dirname] [switches] [filename] [-cargs gcc_switches]

where

-Pprojname
  specifies the project defining the location of source files. When no file names are provided on the command line, all sources in the project are used as input. This switch is required.
filename
  is the name of the source file containing the library unit package declaration for which a test package will be created. The file name may be given with a path.
‘`gcc_switches`’
  is a list of switches for `gcc`. These switches will be passed on to all compiler invocations made by `gnattest` to generate a set of ASIS trees. Here you can provide `-I` switches to form the source search path, use the `-gnatec` switch to set the configuration file, use the `-gnat05` switch if sources should be compiled in Ada 2005 mode, etc.
switches
  is an optional sequence of switches as described in the next section.

`gnattest` results can be found in two different places.

- automatic harness: the harness code, which is located by default in "gnattest/harness" directory that is created in the object directory of corresponding project file. All of this code is generated completely automatically and can be destroyed and regenerated at will. It is not recommended to modify this code manually, since it could easily be overridden by mistake. The entry point in the harness code is the project file named `test_driver.gpr`. Tests can be compiled and run using a command such as:

                gnatmake -P<harness-dir>/test_driver
                test_runner

  Note that you might need to specify the necessary values of scenario variables when you are not using the AUnit defaults.

- actual unit test skeletons: a test skeleton for each visible subprogram is created in a separate file, if it doesn't exist already. By default, those separate test files are located in a "gnattest/tests" directory that is created in the object directory of corresponding project file. For example, if a source file my_unit.ads in directory src contains a visible subprogram Proc, then the corresponding unit test will be found in file src/tests/my_unit-test_data-tests-proc_<code>.adb. <code> is a signature encoding used to differentiate test names in case of overloading.

  Note that if the project already has both my_unit.ads and my_unit-test_data.ads, this will cause a name conflict with the generated test package.

Next: Project Attributes for gnattest, Previous: Running gnattest, Up: Creating Unit Tests Using gnattest

### 26.2 Switches for `gnattest`

`--harness-only`
  When this option is given, `gnattest` creates a harness for all sources, treating them as test packages.
`--additional-tests=projname`
  Sources described in projname are considered potential additional manual tests to be added to the test suite.
`-r`
  Recursively consider all sources from all projects.
`-Xname=value`
  Indicate that external variable name has the value value.
`-q`
  Suppresses noncritical output messages.
`-v`
  Verbose mode: generates version information.
`--validate-type-extensions`
  Enables substitution check: run all tests from all parents in order to check substitutability.
`--skeleton-default=val`
  Specifies the default behavior of generated skeletons. val can be either "fail" or "pass", "fail" being the default.
`--tests-root=dirname`
  The directory hierarchy of tested sources is recreated in the dirname directory, and test packages are placed in corresponding directories. If the dirname is a relative path, it is considered relative to the object directory of the project file. When all sources from all projects are taken recursively from all projects, directory hierarchies of tested sources are recreated for each project in their object directories and test packages are placed accordingly.
`--subdir=dirname`
  Test packages are placed in subdirectories.
`--tests-dir=dirname`
  All test packages are placed in the dirname directory. If the dirname is a relative path, it is considered relative to the object directory of the project file. When all sources from all projects are taken recursively from all projects, dirname directories are created for each project in their object directories and test packages are placed accordingly.
`--harness-dir=dirname`
  specifies the directory that will hold the harness packages and project file for the test driver. If the dirname is a relative path, it is considered relative to the object directory of the project file.
`--separates`
  Bodies of all test routines are generated as separates. Note that this mode is kept for compatibility reasons only and it is not advised to use it due to possible problems with hash in names of test skeletons when using an inconsistent casing. Separate test skeletons can be incorporated to monolith test package with improved hash being used by using `--transition` switch.
`--transition`
  This allows transition from separate test routines to monolith test packages. All matching test routines are overwritten with contents of corresponding separates. Note that if separate test routines had any manually added with clauses they will be moved to the test package body as is and have to be moved by hand.

`--tests_root`, `--subdir` and `--tests-dir` switches are mutually exclusive.

Next: Simple Example, Previous: Switches for gnattest, Up: Creating Unit Tests Using gnattest

### 26.3 Project Attributes for `gnattest`

Most of the command-line options can also be passed to the tool by adding special attributes to the project file. Those attributes should be put in package gnattest. Here is the list of attributes:

- Tests_Root is used to select the same output mode as with the –tests-root option. This attribute cannot be used together with Subdir or Tests_Dir.
- Subdir is used to select the same output mode as with the –subdir option. This attribute cannot be used together with Tests_Root or Tests_Dir.
- Tests_Dir is used to select the same output mode as with the –tests-dir option. This attribute cannot be used together with Subdir or Tests_Root.
- Harness_Dir is used to specify the directory in which to place harness packages and project file for the test driver, otherwise specified by –harness-dir.
- Additional_Tests is used to specify the project file, otherwise given by –additional-tests switch.
- Skeletons_Default is used to specify the default behaviour of test skeletons, otherwise specified by –skeleton-default option. The value of this attribute should be either "pass" or "fail".

Each of those attributes can be overridden from the command line if needed. Other `gnattest` switches can also be passed via the project file as an attribute list called GNATtest_Switches.

Next: Setting Up and Tearing Down the Testing Environment, Previous: Project Attributes for gnattest, Up: Creating Unit Tests Using gnattest

### 26.4 Simple Example

Let's take a very simple example using the first `gnattest` example located in:

         <install_prefix>/share/examples/gnattest/simple

This project contains a simple package containing one subprogram. By running gnattest:

         $ gnattest --harness-dir=driver -Psimple.gpr

a test driver is created in directory "driver". It can be compiled and run:

         $ cd driver
         $ gprbuild -Ptest_driver
         $ test_runner

One failed test with diagnosis "test not implemented" is reported. Since no special output option was specified, the test package Simple.Tests is located in:

         <install_prefix>/share/examples/gnattest/simple/obj/gnattest/tests

For each package containing visible subprograms, a child test package is generated. It contains one test routine per tested subprogram. Each declaration of a test subprogram has a comment specifying which tested subprogram it corresponds to. Bodies of test routines are placed in test package bodies and are surrounded by special comment sections. Those comment sections should not be removed or modified in order for gnattest to be able to regenerate test packages and keep already written tests in place. The test routine Test_Inc_5eaee3 located at simple-test_data-tests.adb contains a single statement: a call to procedure Assert. It has two arguments: the Boolean expression we want to check and the diagnosis message to display if the condition is false.

That is where actual testing code should be written after a proper setup. An actual check can be performed by replacing the Assert call with:

         Assert (Inc (1) = 2, "wrong incrementation");

After recompiling and running the test driver, one successfully passed test is reported.

Next: Regenerating Tests, Previous: Simple Example, Up: Creating Unit Tests Using gnattest

### 26.5 Setting Up and Tearing Down the Testing Environment

Besides test routines themselves, each test package has a parent package Test_Data that has two procedures: Set_Up and Tear_Down. This package is never overwritten by the tool. Set_Up is called before each test routine of the package and Tear_Down is called after each test routine. Those two procedures can be used to perform necessary initialization and finalization, memory allocation, etc. Test type declared in Test_Data package is parent type for the test type of test package and can have user-defined components whose values can be set by Set_Up routine and used in test routines afterwards.

Next: Default Test Behavior, Previous: Setting Up and Tearing Down the Testing Environment, Up: Creating Unit Tests Using gnattest

### 26.6 Regenerating Tests

Bodies of test routines and test_data packages are never overridden after they have been created once. As long as the name of the subprogram, full expanded Ada names, and the order of its parameters is the same, and comment sections are intact the old test routine will fit in its place and no test skeleton will be generated for the subprogram.

This can be demonstrated with the previous example. By uncommenting declaration and body of function Dec in simple.ads and simple.adb, running `gnattest` on the project, and then running the test driver:

         gnattest --harness-dir=driver -Psimple.gpr
         cd driver
         gprbuild -Ptest_driver
         test_runner

the old test is not replaced with a stub, nor is it lost, but a new test skeleton is created for function Dec.

The only way of regenerating tests skeletons is to remove the previously created tests together with corresponding comment sections.

Next: Testing Primitive Operations of Tagged Types, Previous: Regenerating Tests, Up: Creating Unit Tests Using gnattest

### 26.7 Default Test Behavior

The generated test driver can treat unimplemented tests in two ways: either count them all as failed (this is useful to see which tests are still left to implement) or as passed (to sort out unimplemented ones from those actually failing).

The test driver accepts a switch to specify this behavior: –skeleton-default=val, where val is either "pass" or "fail" (exactly as for `gnattest`).

The default behavior of the test driver is set with the same switch as passed to gnattest when generating the test driver.

Passing it to the driver generated on the first example:

         test_runner --skeleton-default=pass

makes both tests pass, even the unimplemented one.

Next: Testing Inheritance, Previous: Default Test Behavior, Up: Creating Unit Tests Using gnattest

### 26.8 Testing Primitive Operations of Tagged Types

Creation of test skeletons for primitive operations of tagged types entails a number of features. Test routines for all primitives of a given tagged type are placed in a separate child package named according to the tagged type. For example, if you have tagged type T in package P, all tests for primitives of T will be in P.T_Test_Data.T_Tests.

Consider running gnattest on the second example (note: actual tests for this example already exist, so there's no need to worry if the tool reports that no new stubs were generated):

         cd <install_prefix>/share/examples/gnattest/tagged_rec
         gnattest --harness-dir=driver -Ptagged_rec.gpr

Taking a closer look at the test type declared in the test package Speed1.Controller_Test_Data is necessary. It is declared in:

         <install_prefix>/share/examples/gnattest/tagged_rec/obj/gnattest/tests

Test types are direct or indirect descendants of AUnit.Test_Fixtures.Test_Fixture type. In the case of nonprimitive tested subprograms, the user doesn't need to be concerned with them. However, when generating test packages for primitive operations, there are some things the user needs to know.

Type Test_Controller has components that allow assignment of various derivations of type Controller. And if you look at the specification of package Speed2.Auto_Controller, you will see that Test_Auto_Controller actually derives from Test_Controller rather than AUnit type Test_Fixture. Thus, test types mirror the hierarchy of tested types.

The Set_Up procedure of Test_Data package corresponding to a test package of primitive operations of type T assigns to Fixture a reference to an object of that exact type T. Notice, however, that if the tagged type has discriminants, the Set_Up only has a commented template for setting up the fixture, since filling the discriminant with actual value is up to the user.

The knowledge of the structure of test types allows additional testing without additional effort. Those possibilities are described below.

Next: Tagged Types Substitutability Testing, Previous: Testing Primitive Operations of Tagged Types, Up: Creating Unit Tests Using gnattest

### 26.9 Testing Inheritance

Since the test type hierarchy mimics the hierarchy of tested types, the inheritance of tests takes place. An example of such inheritance can be seen by running the test driver generated for the second example. As previously mentioned, actual tests are already written for this example.

         cd driver
         gprbuild -Ptest_driver
         test_runner

There are 6 passed tests while there are only 5 testable subprograms. The test routine for function Speed has been inherited and run against objects of the derived type.

Next: Testing with Contracts, Previous: Testing Inheritance, Up: Creating Unit Tests Using gnattest

### 26.10 Tagged Types Substitutability Testing

Tagged Types Substitutability Testing is a way of verifying the global type consistency by testing. Global type consistency is a principle stating that if S is a subtype of T (in Ada, S is a derived type of tagged type T), then objects of type T may be replaced with objects of type S (that is, objects of type S may be substituted for objects of type T), without altering any of the desirable properties of the program. When the properties of the program are expressed in the form of subprogram preconditions and postconditions (let's call them pre and post), the principle is formulated as relations between the pre and post of primitive operations and the pre and post of their derived operations. The pre of a derived operation should not be stronger than the original pre, and the post of the derived operation should not be weaker than the original post. Those relations ensure that verifying if a dispatching call is safe can be done just by using the pre and post of the root operation.

Verifying global type consistency by testing consists of running all the unit tests associated with the primitives of a given tagged type with objects of its derived types.

In the example used in the previous section, there was clearly a violation of type consistency. The overriding primitive Adjust_Speed in package Speed2 removes the functionality of the overridden primitive and thus doesn't respect the consistency principle. Gnattest has a special option to run overridden parent tests against objects of the type which have overriding primitives:

         gnattest --harness-dir=driver --validate-type-extensions -Ptagged_rec.gpr
         cd driver
         gprbuild -Ptest_driver
         test_runner

While all the tests pass by themselves, the parent test for Adjust_Speed fails against objects of the derived type.

Non-overridden tests are already inherited for derived test types, so the –validate-type-extensions enables the application of overriden tests to objects of derived types.

Next: Additional Tests, Previous: Tagged Types Substitutability Testing, Up: Creating Unit Tests Using gnattest

### 26.11 Testing with Contracts

`gnattest` supports pragmas Precondition, Postcondition, and Test_Case, as well as corresponding aspects. Test routines are generated, one per each Test_Case associated with a tested subprogram. Those test routines have special wrappers for tested functions that have composition of pre- and postcondition of the subprogram with "requires" and "ensures" of the Test_Case (depending on the mode, pre and post either count for Nominal mode or do not count for Robustness mode).

The third example demonstrates how this works:

         cd <install_prefix>/share/examples/gnattest/contracts
         gnattest --harness-dir=driver -Pcontracts.gpr

Putting actual checks within the range of the contract does not cause any error reports. For example, for the test routine which corresponds to test case 1:

         Assert (Sqrt (9.0) = 3.0, "wrong sqrt");

and for the test routine corresponding to test case 2:

         Assert (Sqrt (-5.0) = -1.0, "wrong error indication");

are acceptable:

         cd driver
         gprbuild -Ptest_driver
         test_runner

However, by changing 9.0 to 25.0 and 3.0 to 5.0, for example, you can get a precondition violation for test case one. Also, by using any otherwise correct but positive pair of numbers in the second test routine, you can also get a precondition violation. Postconditions are checked and reported the same way.

Next: Support for other platforms/run-times, Previous: Testing with Contracts, Up: Creating Unit Tests Using gnattest

### 26.12 Additional Tests

`gnattest` can add user-written tests to the main suite of the test driver. `gnattest` traverses the given packages and searches for test routines. All procedures with a single in out parameter of a type which is derived from AUnit.Test_Fixtures.Test_Fixture and that are declared in package specifications are added to the suites and are then executed by the test driver. (Set_Up and Tear_Down are filtered out.)

An example illustrates two ways of creating test harnesses for user-written tests. Directory additional_tests contains an AUnit-based test driver written by hand.

         <install_prefix>/share/examples/gnattest/additional_tests/

To create a test driver for already-written tests, use the –harness-only option:

         gnattest -Padditional/harness/harness.gpr --harness-dir=harness_only \
           --harness-only
         gnatmake -Pharness_only/test_driver.gpr
         harness_only/test_runner

Additional tests can also be executed together with generated tests:

         gnattest -Psimple.gpr --additional-tests=additional/harness/harness.gpr \
           --harness-dir=mixing
         gnatmake -Pmixing/test_driver.gpr
         mixing/test_runner

Next: Current Limitations, Previous: Additional Tests, Up: Creating Unit Tests Using gnattest

### 26.13 Support for other platforms/run-times

`gnattest` can be used to generate the test harness for platforms and run-time libraries others than the default native target with the default full run-time. For example, when using a limited run-time library such as Zero FootPrint (ZFP), a simplified harness is generated.

Two variables are used to tell the underlying AUnit framework how to generate the test harness: `PLATFORM`, which identifies the target, and `RUNTIME`, used to determine the run-time library for which the harness is generated. Corresponding prefix should also be used when calling `gnattest` for non-native targets. For example, the following options are used to generate the AUnit test harness for a PowerPC ELF target using the ZFP run-time library:

         powerpc-elf-gnattest -Psimple.gpr -XPLATFORM=powerpc-elf -XRUNTIME=zfp

Previous: Support for other platforms/run-times, Up: Creating Unit Tests Using gnattest

### 26.14 Current Limitations

The tool currently does not support following features:

- generic tests for generic packages and package instantiations
- tests for protected subprograms and entries

Next: Generating Ada Bindings for C and C++ headers, Previous: Creating Unit Tests Using gnattest, Up: Top

## 27 Performing Dimensionality Analysis in GNAT

The GNAT compiler now supports dimensionality checking. The user can specify physical units for objects, and the compiler will verify that uses of these objects are compatible with their dimensions, in a fashion that is familiar to engineering practice. The dimensions of algebraic expressions (including powers with static exponents) are computed from their consistuents.

This feature depends on Ada 2012 aspect specifications, and is available from version 7.0.1 of GNAT onwards. The GNAT-specific aspect Dimension_System allows the user to define a system of units; the aspect Dimension then allows the user to declare dimensioned quantities within a given system.

The major advantage of this model is that it does not require the declaration of multiple operators for all possible combinations of types: it is only necessary to use the proper subtypes in object declarations.

The simplest way to impose dimensionality checking on a computation is to make use of the package System.Dim.Mks, which is part of the GNAT library. This package defines a floating-point type MKS_Type, for which a sequence of dimension names are specified, together with their conventional abbreviations. The following should be read together with the full specification of the package, in file s-dimmks.ads.

            type Mks_Type is new Long_Long_Float
              with
               Dimension_System => (
                 (Unit_Name => Meter,    Unit_Symbol => 'm',   Dim_Symbol => 'L'),
                 (Unit_Name => Kilogram, Unit_Symbol => "kg",  Dim_Symbol => 'M'),
                 (Unit_Name => Second,   Unit_Symbol => 's',   Dim_Symbol => 'T'),
                 (Unit_Name => Ampere,   Unit_Symbol => 'A',   Dim_Symbol => 'I'),
                 (Unit_Name => Kelvin,   Unit_Symbol => 'K',   Dim_Symbol => "Theta"),
                 (Unit_Name => Mole,     Unit_Symbol => "mol", Dim_Symbol => 'N'),
                 (Unit_Name => Candela,  Unit_Symbol => "cd",  Dim_Symbol => 'J'));

The package then defines a series of subtypes that correspond to these conventional units. For example:

            subtype Length is Mks_Type
              with
               Dimension => (Symbol => 'm',
                 Meter  => 1,
                 others => 0);

and similarly for Mass, Time, Electric_Current, Thermodynamic_Temperature, Amount_Of_Substance, and Luminous_Intensity (the standard set of units of the SI system).

The package also defines conventional names for values of each unit, for example:

            m   : constant Length           := 1.0;
            kg  : constant Mass             := 1.0;
            s   : constant Time             := 1.0;
            A   : constant Electric_Current := 1.0;

as well as useful multiples of these units:

            cm  : constant Length := 1.0E-02;
            g   : constant Mass   := 1.0E-03;
            min : constant Time   := 60.0;
            day : constant TIme   := 60.0 * 24.0 * min;
           ...

The user can then define a derived unit by providing the aspect that specifies its dimensions within the MKS system, as well as the string to be used for output of a value of that unit:

           subtype Acceleration is Mks_Type
             with Dimension => ("m/sec^2", Meter => 1, Second => -2, others => 0);

Here is a complete example of use:

         with System.Dim.MKS; use System.Dim.Mks;
         with System.Dim.Mks_IO; use System.Dim.Mks_IO;
         with Text_IO; use Text_IO;
         procedure Free_Fall is
           subtype Acceleration is Mks_Type
             with Dimension => ("m/sec^2", 1, 0, -2, others => 0);
           G : constant acceleration := 9.81 * m / (s ** 2);
           T : Time := 10.0*s;
           Distance : Length;
         begin
           Put ("Gravitational constant: ");
           Put (G, Aft => 2, Exp => 0); Put_Line ("");
           Distance := 0.5 * G * T ** 2;
           Put ("distance travelled in 10 seconds of free fall ");
           Put (Distance, Aft => 2, Exp => 0);
           Put_Line ("");
         end Free_Fall;

Execution of this program yields:

         Gravitational constant:  9.81 m/sec^2
         distance travelled in 10 seconds of free fall 490.50 m

However, incorrect assignments such as:

            Distance := 5.0;
            Distance := 5.0 * kg:

are rejected with the following diagnoses:

            Distance := 5.0;
               >>> dimensions mismatch in assignment
               >>> left-hand side has dimension [L]
               >>> right-hand side is dimensionless

            Distance := 5.0 * kg:
               >>> dimensions mismatch in assignment
               >>> left-hand side has dimension [L]
               >>> right-hand side has dimension [M]

The dimensions of an expression are properly displayed, even if there is no explicit subtype for it. If we add to the program:

               Put ("Final velocity: ");
               Put (G * T, Aft =>2, Exp =>0);
               Put_Line ("");

then the output includes:

              Final velocity: 98.10 m.s**(-1)

Next: Other Utility Programs, Previous: Performing Dimensionality Analysis in GNAT, Up: Top

## 28 Generating Ada Bindings for C and C++ headers

GNAT now comes with a binding generator for C and C++ headers which is intended to do 95% of the tedious work of generating Ada specs from C or C++ header files.

Note that this capability is not intended to generate 100% correct Ada specs, and will is some cases require manual adjustments, although it can often be used out of the box in practice.

Some of the known limitations include:

- only very simple character constant macros are translated into Ada constants. Function macros (macros with arguments) are partially translated as comments, to be completed manually if needed.
- some extensions (e.g. vector types) are not supported
- pointers to pointers or complex structures are mapped to System.Address
- identifiers with identical name (except casing) will generate compilation errors (e.g. `shm_get` vs `SHM_GET`).

The code generated is using the Ada 2005 syntax, which makes it easier to interface with other languages than previous versions of Ada.

Next: Generating bindings for C++ headers, Up: Generating Ada Bindings for C and C++ headers

### 28.1 Running the binding generator

The binding generator is part of the `gcc` compiler and can be invoked via the `-fdump-ada-spec` switch, which will generate Ada spec files for the header files specified on the command line, and all header files needed by these files transitively. For example:

         $ g++ -c -fdump-ada-spec -C /usr/include/time.h
         $ gcc -c -gnat05 *.ads

will generate, under GNU/Linux, the following files: `time_h.ads`, `bits_time_h.ads`, `stddef_h.ads`, `bits_types_h.ads` which correspond to the files `/usr/include/time.h`, `/usr/include/bits/time.h`, etc..., and will then compile in Ada 2005 mode these Ada specs.

The `-C` switch tells `gcc` to extract comments from headers, and will attempt to generate corresponding Ada comments.

If you want to generate a single Ada file and not the transitive closure, you can use instead the `-fdump-ada-spec-slim` switch.

You can optionally specify a parent unit, of which all generated units will be children, using `-fada-spec-parent=`unit.

Note that we recommend when possible to use the `g++` driver to generate bindings, even for most C headers, since this will in general generate better Ada specs. For generating bindings for C++ headers, it is mandatory to use the `g++` command, or `gcc -x c++` which is equivalent in this case. If `g++` cannot work on your C headers because of incompatibilities between C and C++, then you can fallback to `gcc` instead.

For an example of better bindings generated from the C++ front-end, the name of the parameters (when available) are actually ignored by the C front-end. Consider the following C header:

         extern void foo (int variable);

with the C front-end, `variable` is ignored, and the above is handled as:

         extern void foo (int);

generating a generic:

         procedure foo (param1 : int);

with the C++ front-end, the name is available, and we generate:

         procedure foo (variable : int);

In some cases, the generated bindings will be more complete or more meaningful when defining some macros, which you can do via the `-D` switch. This is for example the case with `Xlib.h` under GNU/Linux:

         g++ -c -fdump-ada-spec -DXLIB_ILLEGAL_ACCESS -C /usr/include/X11/Xlib.h

The above will generate more complete bindings than a straight call without the `-DXLIB_ILLEGAL_ACCESS` switch.

In other cases, it is not possible to parse a header file in a stand-alone manner, because other include files need to be included first. In this case, the solution is to create a small header file including the needed `#include` and possible `#define` directives. For example, to generate Ada bindings for `readline/readline.h`, you need to first include `stdio.h`, so you can create a file with the following two lines in e.g. `readline1.h`:

         #include <stdio.h>
         #include <readline/readline.h>

and then generate Ada bindings from this file:

         $ g++ -c -fdump-ada-spec readline1.h

Next: Switches, Previous: Running the binding generator, Up: Generating Ada Bindings for C and C++ headers

### 28.2 Generating bindings for C++ headers

Generating bindings for C++ headers is done using the same options, always with the `g++` compiler.

In this mode, C++ classes will be mapped to Ada tagged types, constructors will be mapped using the `CPP_Constructor` pragma, and when possible, multiple inheritance of abstract classes will be mapped to Ada interfaces (See Interfacing to C++, for additional information on interfacing to C++).

For example, given the following C++ header file:

         class Carnivore {
         public:
            virtual int Number_Of_Teeth () = 0;
         };

         class Domestic {
         public:
            virtual void Set_Owner (char* Name) = 0;
         };

         class Animal {
         public:
           int Age_Count;
           virtual void Set_Age (int New_Age);
         };

         class Dog : Animal, Carnivore, Domestic {
          public:
           int  Tooth_Count;
           char *Owner;

           virtual int  Number_Of_Teeth ();
           virtual void Set_Owner (char* Name);

           Dog();
         };

The corresponding Ada code is generated:

           package Class_Carnivore is
             type Carnivore is limited interface;
             pragma Import (CPP, Carnivore);

             function Number_Of_Teeth (this : access Carnivore) return int is abstract;
           end;
           use Class_Carnivore;

           package Class_Domestic is
             type Domestic is limited interface;
             pragma Import (CPP, Domestic);

             procedure Set_Owner
               (this : access Domestic;
                Name : Interfaces.C.Strings.chars_ptr) is abstract;
           end;
           use Class_Domestic;

           package Class_Animal is
             type Animal is tagged limited record
               Age_Count : aliased int;
             end record;
             pragma Import (CPP, Animal);

             procedure Set_Age (this : access Animal; New_Age : int);
             pragma Import (CPP, Set_Age, "_ZN6Animal7Set_AgeEi");
           end;
           use Class_Animal;

           package Class_Dog is
             type Dog is new Animal and Carnivore and Domestic with record
               Tooth_Count : aliased int;
               Owner : Interfaces.C.Strings.chars_ptr;
             end record;
             pragma Import (CPP, Dog);

             function Number_Of_Teeth (this : access Dog) return int;
             pragma Import (CPP, Number_Of_Teeth, "_ZN3Dog15Number_Of_TeethEv");

             procedure Set_Owner
               (this : access Dog; Name : Interfaces.C.Strings.chars_ptr);
             pragma Import (CPP, Set_Owner, "_ZN3Dog9Set_OwnerEPc");

             function New_Dog return Dog;
             pragma CPP_Constructor (New_Dog);
             pragma Import (CPP, New_Dog, "_ZN3DogC1Ev");
           end;
           use Class_Dog;

Previous: Generating bindings for C++ headers, Up: Generating Ada Bindings for C and C++ headers

### 28.3 Switches

`-fdump-ada-spec`
  Generate Ada spec files for the given header files transitively (including all header files that these headers depend upon).
`-fdump-ada-spec-slim`
  Generate Ada spec files for the header files specified on the command line only.
`-fada-spec-parent=unit`
  Specifies that all files generated by `-fdump-ada-spec*` are to be child units of the specified parent unit.
`-C`
  Extract comments from headers and generate Ada comments in the Ada spec files.

Next: Running and Debugging Ada Programs, Previous: Generating Ada Bindings for C and C++ headers, Up: Top

## 29 Other Utility Programs

This chapter discusses some other utility programs available in the Ada environment.

Next: The External Symbol Naming Scheme of GNAT, Up: Other Utility Programs

### 29.1 Using Other Utility Programs with GNAT

The object files generated by GNAT are in standard system format and in particular the debugging information uses this format. This means programs generated by GNAT can be used with existing utilities that depend on these formats.

In general, any utility program that works with C will also often work with Ada programs generated by GNAT. This includes software utilities such as gprof (a profiling program), `gdb` (the FSF debugger), and utilities such as Purify.

Next: Converting Ada Files to html with gnathtml, Previous: Using Other Utility Programs with GNAT, Up: Other Utility Programs

### 29.2 The External Symbol Naming Scheme of GNAT

In order to interpret the output from GNAT, when using tools that are originally intended for use with other languages, it is useful to understand the conventions used to generate link names from the Ada entity names.

All link names are in all lowercase letters. With the exception of library procedure names, the mechanism used is simply to use the full expanded Ada name with dots replaced by double underscores. For example, suppose we have the following package spec:

         package QRS is
            MN : Integer;
         end QRS;

The variable `MN` has a full expanded Ada name of `QRS.MN`, so the corresponding link name is `qrs__mn`. Of course if a `pragma Export` is used this may be overridden:

         package Exports is
            Var1 : Integer;
            pragma Export (Var1, C, External_Name => "var1_name");
            Var2 : Integer;
            pragma Export (Var2, C, Link_Name => "var2_link_name");
         end Exports;

In this case, the link name for Var1 is whatever link name the C compiler would assign for the C function var1_name. This typically would be either var1_name or _var1_name, depending on operating system conventions, but other possibilities exist. The link name for Var2 is var2_link_name, and this is not operating system dependent.

One exception occurs for library level procedures. A potential ambiguity arises between the required name `_main` for the C main program, and the name we would otherwise assign to an Ada library level procedure called `Main` (which might well not be the main program).

To avoid this ambiguity, we attach the prefix `_ada_` to such names. So if we have a library level procedure such as

         procedure Hello (S : String);

the external name of this procedure will be _ada_hello.

Next: Installing gnathtml, Previous: The External Symbol Naming Scheme of GNAT, Up: Other Utility Programs

### 29.3 Converting Ada Files to HTML with `gnathtml`

This `Perl` script allows Ada source files to be browsed using standard Web browsers. For installation procedure, see the section See Installing gnathtml.

Ada reserved keywords are highlighted in a bold font and Ada comments in a blue font. Unless your program was compiled with the gcc `-gnatx` switch to suppress the generation of cross-referencing information, user defined variables and types will appear in a different color; you will be able to click on any identifier and go to its declaration.

The command line is as follow:

         $ perl gnathtml.pl [switches] ada-files

You can pass it as many Ada files as you want. `gnathtml` will generate an html file for every ada file, and a global file called `index.htm`. This file is an index of every identifier defined in the files.

The available switches are the following ones:

`-83`
  Only the Ada 83 subset of keywords will be highlighted.
`-cc color`
  This option allows you to change the color used for comments. The default value is green. The color argument can be any name accepted by html.
`-d`
  If the Ada files depend on some other files (for instance through `with` clauses, the latter files will also be converted to html. Only the files in the user project will be converted to html, not the files in the run-time library itself.
`-D`
  This command is the same as `-d` above, but `gnathtml` will also look for files in the run-time library, and generate html files for them.
`-ext extension`
  This option allows you to change the extension of the generated HTML files. If you do not specify an extension, it will default to `htm`.
`-f`
  By default, gnathtml will generate html links only for global entities ('with'ed units, global variables and types,...). If you specify `-f` on the command line, then links will be generated for local entities too.
`-l number`
  If this switch is provided and number is not 0, then `gnathtml` will number the html files every number line.
`-I dir`
  Specify a directory to search for library files (`.ALI` files) and source files. You can provide several -I switches on the command line, and the directories will be parsed in the order of the command line.
`-o dir`
  Specify the output directory for html files. By default, gnathtml will saved the generated html files in a subdirectory named `html/`.
`-p file`
  If you are using Emacs and the most recent Emacs Ada mode, which provides a full Integrated Development Environment for compiling, checking, running and debugging applications, you may use `.gpr` files to give the directories where Emacs can find sources and object files.

  Using this switch, you can tell gnathtml to use these files. This allows you to get an html version of your application, even if it is spread over multiple directories.

`-sc color`
  This switch allows you to change the color used for symbol definitions. The default value is red. The color argument can be any name accepted by html.
`-t file`
  This switch provides the name of a file. This file contains a list of file names to be converted, and the effect is exactly as though they had appeared explicitly on the command line. This is the recommended way to work around the command line length limit on some systems.

Previous: Converting Ada Files to html with gnathtml, Up: Other Utility Programs

### 29.4 Installing `gnathtml`

`Perl` needs to be installed on your machine to run this script. `Perl` is freely available for almost every architecture and Operating System via the Internet.

On Unix systems, you may want to modify the first line of the script `gnathtml`, to explicitly tell the Operating system where Perl is. The syntax of this line is:

         #!full_path_name_to_perl

Alternatively, you may run the script using the following command line:

         $ perl gnathtml.pl [switches] files

Next: Platform-Specific Information for the Run-Time Libraries, Previous: Running and Debugging Ada Programs, Up: Top

## 30 Code Coverage and Profiling

This chapter describes how to use `gcov` - coverage testing tool - and `gprof` - profiler tool - on your Ada programs.

Next: Profiling an Ada Program using gprof, Up: Code Coverage and Profiling

### 30.1 Code Coverage of Ada Programs using gcov

`gcov` is a test coverage program: it analyzes the execution of a given program on selected tests, to help you determine the portions of the program that are still untested.

`gcov` is part of the GCC suite, and is described in detail in the GCC User's Guide. You can refer to this documentation for a more complete description.

This chapter provides a quick startup guide, and details some Gnat-specific features.

Next: Gnat specifics, Up: Code Coverage of Ada Programs using gcov

#### 30.1.1 Quick startup guide

In order to perform coverage analysis of a program using `gcov`, 3 steps are needed:

- Code instrumentation during the compilation process
- Execution of the instrumented program
- Execution of the `gcov` tool to generate the result.

The code instrumentation needed by gcov is created at the object level: The source code is not modified in any way, because the instrumentation code is inserted by gcc during the compilation process. To compile your code with code coverage activated, you need to recompile your whole project using the switches `-fprofile-arcs` and `-ftest-coverage`, and link it using `-fprofile-arcs`.

         $ gnatmake -P my_project.gpr -f -cargs -fprofile-arcs -ftest-coverage \
            -largs -fprofile-arcs

This compilation process will create `.gcno` files together with the usual object files.

Once the program is compiled with coverage instrumentation, you can run it as many times as needed - on portions of a test suite for example. The first execution will produce `.gcda` files at the same location as the `.gcno` files. The following executions will update those files, so that a cumulative result of the covered portions of the program is generated.

Finally, you need to call the `gcov` tool. The different options of `gcov` are available in the GCC User's Guide, section 'Invoking gcov'.

This will create annotated source files with a `.gcov` extension: `my_main.adb` file will be analysed in `my_main.adb.gcov`.

Previous: Quick startup guide, Up: Code Coverage of Ada Programs using gcov

#### 30.1.2 Gnat specifics

Because Ada semantics, portions of the source code may be shared among several object files. This is the case for example when generics are involved, when inlining is active or when declarations generate initialisation calls. In order to take into account this shared code, you need to call `gcov` on all source files of the tested program at once.

The list of source files might exceed the system's maximum command line length. In order to bypass this limitation, a new mechanism has been implemented in `gcov`: you can now list all your project's files into a text file, and provide this file to gcov as a parameter, preceded by a @ (e.g. ‘`gcov @mysrclist.txt`’).

Note that on AIX compiling a static library with `-fprofile-arcs` is not supported as there can be unresolved symbols during the final link.

Previous: Code Coverage of Ada Programs using gcov, Up: Code Coverage and Profiling

### 30.2 Profiling an Ada Program using gprof

This section is not meant to be an exhaustive documentation of `gprof`. Full documentation for it can be found in the GNU Profiler User's Guide documentation that is part of this GNAT distribution.

Profiling a program helps determine the parts of a program that are executed most often, and are therefore the most time-consuming.

`gprof` is the standard GNU profiling tool; it has been enhanced to better handle Ada programs and multitasking. It is currently supported on the following platforms

- linux x86/x86_64
- solaris sparc/sparc64/x86
- windows x86

In order to profile a program using `gprof`, 3 steps are needed:

- Code instrumentation, requiring a full recompilation of the project with the proper switches.
- Execution of the program under the analysis conditions, i.e. with the desired input.
- Analysis of the results using the `gprof` tool.

The following sections detail the different steps, and indicate how to interpret the results:

Next: Program execution, Up: Profiling an Ada Program using gprof

#### 30.2.1 Compilation for profiling

In order to profile a program the first step is to tell the compiler to generate the necessary profiling information. The compiler switch to be used is `-pg`, which must be added to other compilation switches. This switch needs to be specified both during compilation and link stages, and can be specified once when using gnatmake:

         gnatmake -f -pg -P my_project

Note that only the objects that were compiled with the ‘`-pg`’ switch will be profiled; if you need to profile your whole project, use the ‘`-f`’ gnatmake switch to force full recompilation.

Next: Running gprof, Previous: Compilation for profiling, Up: Profiling an Ada Program using gprof

#### 30.2.2 Program execution

Once the program has been compiled for profiling, you can run it as usual.

The only constraint imposed by profiling is that the program must terminate normally. An interrupted program (via a Ctrl-C, kill, etc.) will not be properly analyzed.

Once the program completes execution, a data file called `gmon.out` is generated in the directory where the program was launched from. If this file already exists, it will be overwritten.

Next: Interpretation of profiling results, Previous: Program execution, Up: Profiling an Ada Program using gprof

#### 30.2.3 Running gprof

The `gprof` tool is called as follow:

         gprof my_prog gmon.out

or simpler:

         gprof my_prog

The complete form of the gprof command line is the following:

         gprof [switches] [executable [data-file]]

`gprof` supports numerous switch. The order of these switch does not matter. The full list of options can be found in the GNU Profiler User's Guide documentation that comes with this documentation.

The following is the subset of those switches that is most relevant:

`--demangle[=style]`
`--no-demangle`
  These options control whether symbol names should be demangled when printing output. The default is to demangle C++ symbols. The `--no-demangle` option may be used to turn off demangling. Different compilers have different mangling styles. The optional demangling style argument can be used to choose an appropriate demangling style for your compiler, in particular Ada symbols generated by GNAT can be demangled using `--demangle=gnat`.
`-e function_name`
  The ‘`-e function`’ option tells `gprof` not to print information about the function function_name (and its children...) in the call graph. The function will still be listed as a child of any functions that call it, but its index number will be shown as ‘`[not printed]`’. More than one ‘`-e`’ option may be given; only one function_name may be indicated with each ‘`-e`’ option.
`-E function_name`
  The `-E` function option works like the `-e` option, but execution time spent in the function (and children who were not called from anywhere else), will not be used to compute the percentages-of-time for the call graph. More than one ‘`-E`’ option may be given; only one function_name may be indicated with each ‘`-E`’ option.
`-f function_name`
  The ‘`-f function`’ option causes `gprof` to limit the call graph to the function function_name and its children (and their children...). More than one ‘`-f`’ option may be given; only one function_name may be indicated with each ‘`-f`’ option.
`-F function_name`
  The ‘`-F function`’ option works like the `-f` option, but only time spent in the function and its children (and their children...) will be used to determine total-time and percentages-of-time for the call graph. More than one ‘`-F`’ option may be given; only one function_name may be indicated with each ‘`-F`’ option. The ‘`-F`’ option overrides the ‘`-E`’ option.

Previous: Running gprof, Up: Profiling an Ada Program using gprof

#### 30.2.4 Interpretation of profiling results

The results of the profiling analysis are represented by two arrays: the 'flat profile' and the 'call graph'. Full documentation of those outputs can be found in the GNU Profiler User's Guide.

The flat profile shows the time spent in each function of the program, and how many time it has been called. This allows you to locate easily the most time-consuming functions.

The call graph shows, for each subprogram, the subprograms that call it, and the subprograms that it calls. It also provides an estimate of the time spent in each of those callers/called subprograms.

Next: Code Coverage and Profiling, Previous: Other Utility Programs, Up: Top

## 31 Running and Debugging Ada Programs

This chapter discusses how to debug Ada programs.

An incorrect Ada program may be handled in three ways by the GNAT compiler:

1. The illegality may be a violation of the static semantics of Ada. In that case GNAT diagnoses the constructs in the program that are illegal. It is then a straightforward matter for the user to modify those parts of the program.
2. The illegality may be a violation of the dynamic semantics of Ada. In that case the program compiles and executes, but may generate incorrect results, or may terminate abnormally with some exception.
3. When presented with a program that contains convoluted errors, GNAT itself may terminate abnormally without providing full diagnostics on the incorrect user program.

Next: Running GDB, Up: Running and Debugging Ada Programs

### 31.1 The GNAT Debugger GDB

`GDB` is a general purpose, platform-independent debugger that can be used to debug mixed-language programs compiled with `gcc`, and in particular is capable of debugging Ada programs compiled with GNAT. The latest versions of `GDB` are Ada-aware and can handle complex Ada data structures.

See Debugging with GDB, for full details on the usage of `GDB`, including a section on its usage on programs. This manual should be consulted for full details. The section that follows is a brief introduction to the philosophy and use of `GDB`.

When GNAT programs are compiled, the compiler optionally writes debugging information into the generated object file, including information on line numbers, and on declared types and variables. This information is separate from the generated code. It makes the object files considerably larger, but it does not add to the size of the actual executable that will be loaded into memory, and has no impact on run-time performance. The generation of debug information is triggered by the use of the -g switch in the `gcc` or `gnatmake` command used to carry out the compilations. It is important to emphasize that the use of these options does not change the generated code.

The debugging information is written in standard system formats that are used by many tools, including debuggers and profilers. The format of the information is typically designed to describe C types and semantics, but GNAT implements a translation scheme which allows full details about Ada types and variables to be encoded into these standard C formats. Details of this encoding scheme may be found in the file exp_dbug.ads in the GNAT source distribution. However, the details of this encoding are, in general, of no interest to a user, since `GDB` automatically performs the necessary decoding.

When a program is bound and linked, the debugging information is collected from the object files, and stored in the executable image of the program. Again, this process significantly increases the size of the generated executable file, but it does not increase the size of the executable program itself. Furthermore, if this program is run in the normal manner, it runs exactly as if the debug information were not present, and takes no more actual memory.

However, if the program is run under control of `GDB`, the debugger is activated. The image of the program is loaded, at which point it is ready to run. If a run command is given, then the program will run exactly as it would have if `GDB` were not present. This is a crucial part of the `GDB` design philosophy. `GDB` is entirely non-intrusive until a breakpoint is encountered. If no breakpoint is ever hit, the program will run exactly as it would if no debugger were present. When a breakpoint is hit, `GDB` accesses the debugging information and can respond to user commands to inspect variables, and more generally to report on the state of execution.

Next: Introduction to GDB Commands, Previous: The GNAT Debugger GDB, Up: Running and Debugging Ada Programs

### 31.2 Running GDB

This section describes how to initiate the debugger.

The debugger can be launched from a `GPS` menu or directly from the command line. The description below covers the latter use. All the commands shown can be used in the `GPS` debug console window, but there are usually more GUI-based ways to achieve the same effect.

The command to run `GDB` is

         $ gdb program

where `program` is the name of the executable file. This activates the debugger and results in a prompt for debugger commands. The simplest command is simply `run`, which causes the program to run exactly as if the debugger were not present. The following section describes some of the additional commands that can be given to `GDB`.

Next: Using Ada Expressions, Previous: Running GDB, Up: Running and Debugging Ada Programs

### 31.3 Introduction to GDB Commands

`GDB` contains a large repertoire of commands. See Debugging with GDB, for extensive documentation on the use of these commands, together with examples of their use. Furthermore, the command `help` invoked from within GDB activates a simple help facility which summarizes the available commands and their options. In this section we summarize a few of the most commonly used commands to give an idea of what `GDB` is about. You should create a simple program with debugging information and experiment with the use of these `GDB` commands on the program as you read through the following section.

`set args` arguments
  The arguments list above is a list of arguments to be passed to the program on a subsequent run command, just as though the arguments had been entered on a normal invocation of the program. The `set args` command is not needed if the program does not require arguments.
`run`
  The `run` command causes execution of the program to start from the beginning. If the program is already running, that is to say if you are currently positioned at a breakpoint, then a prompt will ask for confirmation that you want to abandon the current execution and restart.
`breakpoint` location
  The breakpoint command sets a breakpoint, that is to say a point at which execution will halt and `GDB` will await further commands. location is either a line number within a file, given in the format `file:linenumber`, or it is the name of a subprogram. If you request that a breakpoint be set on a subprogram that is overloaded, a prompt will ask you to specify on which of those subprograms you want to breakpoint. You can also specify that all of them should be breakpointed. If the program is run and execution encounters the breakpoint, then the program stops and `GDB` signals that the breakpoint was encountered by printing the line of code before which the program is halted.
`catch exception` name
  This command causes the program execution to stop whenever exception name is raised. If name is omitted, then the execution is suspended when any exception is raised.
`print` expression
  This will print the value of the given expression. Most simple Ada expression formats are properly handled by `GDB`, so the expression can contain function calls, variables, operators, and attribute references.
`continue`
  Continues execution following a breakpoint, until the next breakpoint or the termination of the program.
`step`
  Executes a single line after a breakpoint. If the next statement is a subprogram call, execution continues into (the first statement of) the called subprogram.
`next`
  Executes a single line. If this line is a subprogram call, executes and returns from the call.
`list`
  Lists a few lines around the current source location. In practice, it is usually more convenient to have a separate edit window open with the relevant source file displayed. Successive applications of this command print subsequent lines. The command can be given an argument which is a line number, in which case it displays a few lines around the specified one.
`backtrace`
  Displays a backtrace of the call chain. This command is typically used after a breakpoint has occurred, to examine the sequence of calls that leads to the current breakpoint. The display includes one line for each activation record (frame) corresponding to an active subprogram.
`up`
  At a breakpoint, `GDB` can display the values of variables local to the current frame. The command `up` can be used to examine the contents of other active frames, by moving the focus up the stack, that is to say from callee to caller, one frame at a time.
`down`
  Moves the focus of `GDB` down from the frame currently being examined to the frame of its callee (the reverse of the previous command),
`frame` n
  Inspect the frame with the given number. The value 0 denotes the frame of the current breakpoint, that is to say the top of the call stack.

The above list is a very short introduction to the commands that `GDB` provides. Important additional capabilities, including conditional breakpoints, the ability to execute command sequences on a breakpoint, the ability to debug at the machine instruction level and many other features are described in detail in Debugging with GDB. Note that most commands can be abbreviated (for example, c for continue, bt for backtrace).

Next: Calling User-Defined Subprograms, Previous: Introduction to GDB Commands, Up: Running and Debugging Ada Programs

### 31.4 Using Ada Expressions

`GDB` supports a fairly large subset of Ada expression syntax, with some extensions. The philosophy behind the design of this subset is

- That `GDB` should provide basic literals and access to operations for arithmetic, dereferencing, field selection, indexing, and subprogram calls, leaving more sophisticated computations to subprograms written into the program (which therefore may be called from `GDB`).
- That type safety and strict adherence to Ada language restrictions are not particularly important to the `GDB` user.
- That brevity is important to the `GDB` user.

Thus, for brevity, the debugger acts as if there were implicit `with` and `use` clauses in effect for all user-written packages, thus making it unnecessary to fully qualify most names with their packages, regardless of context. Where this causes ambiguity, `GDB` asks the user's intent.

For details on the supported Ada syntax, see Debugging with GDB.

Next: Using the Next Command in a Function, Previous: Using Ada Expressions, Up: Running and Debugging Ada Programs

### 31.5 Calling User-Defined Subprograms

An important capability of `GDB` is the ability to call user-defined subprograms while debugging. This is achieved simply by entering a subprogram call statement in the form:

         call subprogram-name (parameters)

The keyword `call` can be omitted in the normal case where the `subprogram-name` does not coincide with any of the predefined `GDB` commands.

The effect is to invoke the given subprogram, passing it the list of parameters that is supplied. The parameters can be expressions and can include variables from the program being debugged. The subprogram must be defined at the library level within your program, and `GDB` will call the subprogram within the environment of your program execution (which means that the subprogram is free to access or even modify variables within your program).

The most important use of this facility is in allowing the inclusion of debugging routines that are tailored to particular data structures in your program. Such debugging routines can be written to provide a suitably high-level description of an abstract type, rather than a low-level dump of its physical layout. After all, the standard `GDB print` command only knows the physical layout of your types, not their abstract meaning. Debugging routines can provide information at the desired semantic level and are thus enormously useful.

For example, when debugging GNAT itself, it is crucial to have access to the contents of the tree nodes used to represent the program internally. But tree nodes are represented simply by an integer value (which in turn is an index into a table of nodes). Using the `print` command on a tree node would simply print this integer value, which is not very useful. But the PN routine (defined in file treepr.adb in the GNAT sources) takes a tree node as input, and displays a useful high level representation of the tree node, which includes the syntactic category of the node, its position in the source, the integers that denote descendant nodes and parent node, as well as varied semantic information. To study this example in more detail, you might want to look at the body of the PN procedure in the stated file.

Next: Ada Exceptions, Previous: Calling User-Defined Subprograms, Up: Running and Debugging Ada Programs

### 31.6 Using the Next Command in a Function

When you use the `next` command in a function, the current source location will advance to the next statement as usual. A special case arises in the case of a `return` statement.

Part of the code for a return statement is the “epilog” of the function. This is the code that returns to the caller. There is only one copy of this epilog code, and it is typically associated with the last return statement in the function if there is more than one return. In some implementations, this epilog is associated with the first statement of the function.

The result is that if you use the `next` command from a return statement that is not the last return statement of the function you may see a strange apparent jump to the last return statement or to the start of the function. You should simply ignore this odd jump. The value returned is always that from the first return statement that was stepped through.

Next: Ada Tasks, Previous: Using the Next Command in a Function, Up: Running and Debugging Ada Programs

### 31.7 Stopping when Ada Exceptions are Raised

You can set catchpoints that stop the program execution when your program raises selected exceptions.

`catch exception`
  Set a catchpoint that stops execution whenever (any task in the) program raises any exception.
`catch exception` name
  Set a catchpoint that stops execution whenever (any task in the) program raises the exception name.
`catch exception unhandled`
  Set a catchpoint that stops executing whenever (any task in the) program raises an exception for which there is no handler.
`info exceptions`
`info exceptions` regexp
  The `info exceptions` command permits the user to examine all defined exceptions within Ada programs. With a regular expression, regexp, as argument, prints out only those exceptions whose name matches regexp.

Next: Debugging Generic Units, Previous: Ada Exceptions, Up: Running and Debugging Ada Programs

### 31.8 Ada Tasks

`GDB` allows the following task-related commands:

`info tasks`
  This command shows a list of current Ada tasks, as in the following example:

                (gdb) info tasks
                  ID       TID P-ID   Thread Pri State                 Name
                   1   8088000   0   807e000  15 Child Activation Wait main_task
                   2   80a4000   1   80ae000  15 Accept/Select Wait    b
                   3   809a800   1   80a4800  15 Child Activation Wait a
                *  4   80ae800   3   80b8000  15 Running               c

  In this listing, the asterisk before the first task indicates it to be the currently running task. The first column lists the task ID that is used to refer to tasks in the following commands.

`break` linespec `task` taskid
`break` linespec `task` taskid `if ...`
  These commands are like the `break ... thread ...`. linespec specifies source lines.

  Use the qualifier ‘`task taskid`’ with a breakpoint command to specify that you only want `GDB` to stop the program when a particular Ada task reaches this breakpoint. taskid is one of the numeric task identifiers assigned by `GDB`, shown in the first column of the ‘`info tasks`’ display.

  If you do not specify ‘`task taskid`’ when you set a breakpoint, the breakpoint applies to all tasks of your program.

  You can use the `task` qualifier on conditional breakpoints as well; in this case, place ‘`task taskid`’ before the breakpoint condition (before the `if`).

`task` taskno
  This command allows to switch to the task referred by taskno. In particular, This allows to browse the backtrace of the specified task. It is advised to switch back to the original task before continuing execution otherwise the scheduling of the program may be perturbed.

For more detailed information on the tasking support, see Debugging with GDB.

Next: Remote Debugging using gdbserver, Previous: Ada Tasks, Up: Running and Debugging Ada Programs

### 31.9 Debugging Generic Units

GNAT always uses code expansion for generic instantiation. This means that each time an instantiation occurs, a complete copy of the original code is made, with appropriate substitutions of formals by actuals.

It is not possible to refer to the original generic entities in `GDB`, but it is always possible to debug a particular instance of a generic, by using the appropriate expanded names. For example, if we have

         procedure g is

            generic package k is
               procedure kp (v1 : in out integer);
            end k;

            package body k is
               procedure kp (v1 : in out integer) is
               begin
                  v1 := v1 + 1;
               end kp;
            end k;

            package k1 is new k;
            package k2 is new k;

            var : integer := 1;

         begin
            k1.kp (var);
            k2.kp (var);
            k1.kp (var);
            k2.kp (var);
         end;

Then to break on a call to procedure kp in the k2 instance, simply use the command:

         (gdb) break g.k2.kp

When the breakpoint occurs, you can step through the code of the instance in the normal manner and examine the values of local variables, as for other units.

Next: GNAT Abnormal Termination or Failure to Terminate, Previous: Debugging Generic Units, Up: Running and Debugging Ada Programs

### 31.10 Remote Debugging using gdbserver

On platforms where gdbserver is supported, it is possible to use this tool to debug your application remotely. This can be useful in situations where the program needs to be run on a target host that is different from the host used for development, particularly when the target has a limited amount of resources (either CPU and/or memory).

To do so, start your program using gdbserver on the target machine. gdbserver then automatically suspends the execution of your program at its entry point, waiting for a debugger to connect to it. The following commands starts an application and tells gdbserver to wait for a connection with the debugger on localhost port 4444.

         $ gdbserver localhost:4444 program
         Process program created; pid = 5685
         Listening on port 4444

Once gdbserver has started listening, we can tell the debugger to establish a connection with this gdbserver, and then start the same debugging session as if the program was being debugged on the same host, directly under the control of GDB.

         $ gdb program
         (gdb) target remote targethost:4444
         Remote debugging using targethost:4444
         0x00007f29936d0af0 in ?? () from /lib64/ld-linux-x86-64.so.
         (gdb) b foo.adb:3
         Breakpoint 1 at 0x401f0c: file foo.adb, line 3.
         (gdb) continue
         Continuing.

         Breakpoint 1, foo () at foo.adb:4
         4       end foo;

It is also possible to use gdbserver to attach to an already running program, in which case the execution of that program is simply suspended until the connection between the debugger and gdbserver is established.

For more information on how to use gdbserver, Server. GNAT provides support for gdbserver on x86-linux, x86-windows and x86_64-linux.

Next: Naming Conventions for GNAT Source Files, Previous: Remote Debugging using gdbserver, Up: Running and Debugging Ada Programs

### 31.11 GNAT Abnormal Termination or Failure to Terminate

When presented with programs that contain serious errors in syntax or semantics, GNAT may on rare occasions experience problems in operation, such as aborting with a segmentation fault or illegal memory access, raising an internal exception, terminating abnormally, or failing to terminate at all. In such cases, you can activate various features of GNAT that can help you pinpoint the construct in your program that is the likely source of the problem.

The following strategies are presented in increasing order of difficulty, corresponding to your experience in using GNAT and your familiarity with compiler internals.

1. Run `gcc` with the `-gnatf`. This first switch causes all errors on a given line to be reported. In its absence, only the first error on a line is displayed.

   The `-gnatdO` switch causes errors to be displayed as soon as they are encountered, rather than after compilation is terminated. If GNAT terminates prematurely or goes into an infinite loop, the last error message displayed may help to pinpoint the culprit.

2. Run `gcc` with the `-v (verbose)` switch. In this mode, `gcc` produces ongoing information about the progress of the compilation and provides the name of each procedure as code is generated. This switch allows you to find which Ada procedure was being compiled when it encountered a code generation problem.
3. Run `gcc` with the `-gnatdc` switch. This is a GNAT specific switch that does for the front-end what `-v` does for the back end. The system prints the name of each unit, either a compilation unit or nested unit, as it is being analyzed.
4. Finally, you can start `gdb` directly on the `gnat1` executable. `gnat1` is the front-end of GNAT, and can be run independently (normally it is just called from `gcc`). You can use `gdb` on `gnat1` as you would on a C program (but see The GNAT Debugger GDB for caveats). The `where` command is the first line of attack; the variable `lineno` (seen by `print lineno`), used by the second phase of `gnat1` and by the `gcc` backend, indicates the source line at which the execution stopped, and `input_file name` indicates the name of the source file.

Next: Getting Internal Debugging Information, Previous: GNAT Abnormal Termination or Failure to Terminate, Up: Running and Debugging Ada Programs

### 31.12 Naming Conventions for GNAT Source Files

In order to examine the workings of the GNAT system, the following brief description of its organization may be helpful:

- Files with prefix `sc` contain the lexical scanner.
- All files prefixed with `par` are components of the parser. The numbers correspond to chapters of the Ada Reference Manual. For example, parsing of select statements can be found in `par-ch9.adb`.
- All files prefixed with `sem` perform semantic analysis. The numbers correspond to chapters of the Ada standard. For example, all issues involving context clauses can be found in `sem_ch10.adb`. In addition, some features of the language require sufficient special processing to justify their own semantic files: sem_aggr for aggregates, sem_disp for dynamic dispatching, etc.
- All files prefixed with `exp` perform normalization and expansion of the intermediate representation (abstract syntax tree, or AST). these files use the same numbering scheme as the parser and semantics files. For example, the construction of record initialization procedures is done in `exp_ch3.adb`.
- The files prefixed with `bind` implement the binder, which verifies the consistency of the compilation, determines an order of elaboration, and generates the bind file.
- The files `atree.ads` and `atree.adb` detail the low-level data structures used by the front-end.
- The files `sinfo.ads` and `sinfo.adb` detail the structure of the abstract syntax tree as produced by the parser.
- The files `einfo.ads` and `einfo.adb` detail the attributes of all entities, computed during semantic analysis.
- Library management issues are dealt with in files with prefix `lib`.
- Ada files with the prefix `a-` are children of `Ada`, as defined in Annex A.
- Files with prefix `i-` are children of `Interfaces`, as defined in Annex B.
- Files with prefix `s-` are children of `System`. This includes both language-defined children and GNAT run-time routines.
- Files with prefix `g-` are children of `GNAT`. These are useful general-purpose packages, fully documented in their specs. All the other `.c` files are modifications of common `gcc` files.

Next: Stack Traceback, Previous: Naming Conventions for GNAT Source Files, Up: Running and Debugging Ada Programs

### 31.13 Getting Internal Debugging Information

Most compilers have internal debugging switches and modes. GNAT does also, except GNAT internal debugging switches and modes are not secret. A summary and full description of all the compiler and binder debug flags are in the file `debug.adb`. You must obtain the sources of the compiler to see the full detailed effects of these flags.

The switches that print the source of the program (reconstructed from the internal tree) are of general interest for user programs, as are the options to print the full internal tree, and the entity table (the symbol table information). The reconstructed source provides a readable version of the program after the front-end has completed analysis and expansion, and is useful when studying the performance of specific constructs. For example, constraint checks are indicated, complex aggregates are replaced with loops and assignments, and tasking primitives are replaced with run-time calls.

Previous: Getting Internal Debugging Information, Up: Running and Debugging Ada Programs

### 31.14 Stack Traceback

Traceback is a mechanism to display the sequence of subprogram calls that leads to a specified execution point in a program. Often (but not always) the execution point is an instruction at which an exception has been raised. This mechanism is also known as stack unwinding because it obtains its information by scanning the run-time stack and recovering the activation records of all active subprograms. Stack unwinding is one of the most important tools for program debugging.

The first entry stored in traceback corresponds to the deepest calling level, that is to say the subprogram currently executing the instruction from which we want to obtain the traceback.

Note that there is no runtime performance penalty when stack traceback is enabled, and no exception is raised during program execution.

Next: Symbolic Traceback, Up: Stack Traceback

#### 31.14.1 Non-Symbolic Traceback

Note: this feature is not supported on all platforms. See `GNAT.Traceback spec in g-traceb.ads` for a complete list of supported platforms.

Next: Tracebacks From Exception Occurrences (non-symbolic), Up: Non-Symbolic Traceback

##### 31.14.1.1 Tracebacks From an Unhandled Exception

A runtime non-symbolic traceback is a list of addresses of call instructions. To enable this feature you must use the `-E` `gnatbind`'s option. With this option a stack traceback is stored as part of exception information. You can retrieve this information using the `addr2line` tool.

Here is a simple example:

         procedure STB is

            procedure P1 is
            begin
               raise Constraint_Error;
            end P1;

            procedure P2 is
            begin
               P1;
            end P2;

         begin
            P2;
         end STB;

         $ gnatmake stb -bargs -E
         $ stb

         Execution terminated by unhandled exception
         Exception name: CONSTRAINT_ERROR
         Message: stb.adb:5
         Call stack traceback locations:
         0x401373 0x40138b 0x40139c 0x401335 0x4011c4 0x4011f1 0x77e892a4

As we see the traceback lists a sequence of addresses for the unhandled exception `CONSTRAINT_ERROR` raised in procedure P1. It is easy to guess that this exception come from procedure P1. To translate these addresses into the source lines where the calls appear, the `addr2line` tool, described below, is invaluable. The use of this tool requires the program to be compiled with debug information.

         $ gnatmake -g stb -bargs -E
         $ stb

         Execution terminated by unhandled exception
         Exception name: CONSTRAINT_ERROR
         Message: stb.adb:5
         Call stack traceback locations:
         0x401373 0x40138b 0x40139c 0x401335 0x4011c4 0x4011f1 0x77e892a4

         $ addr2line --exe=stb 0x401373 0x40138b 0x40139c 0x401335 0x4011c4
            0x4011f1 0x77e892a4

         00401373 at d:/stb/stb.adb:5
         0040138B at d:/stb/stb.adb:10
         0040139C at d:/stb/stb.adb:14
         00401335 at d:/stb/b~stb.adb:104
         004011C4 at /build/.../crt1.c:200
         004011F1 at /build/.../crt1.c:222
         77E892A4 in ?? at ??:0

The `addr2line` tool has several other useful options:

`--functions`
  to get the function name corresponding to any location
`--demangle=gnat`
  to use the gnat decoding mode for the function names. Note that for binutils version 2.9.x the option is simply `--demangle`.

         $ addr2line --exe=stb --functions --demangle=gnat 0x401373 0x40138b
            0x40139c 0x401335 0x4011c4 0x4011f1

         00401373 in stb.p1 at d:/stb/stb.adb:5
         0040138B in stb.p2 at d:/stb/stb.adb:10
         0040139C in stb at d:/stb/stb.adb:14
         00401335 in main at d:/stb/b~stb.adb:104
         004011C4 in <__mingw_CRTStartup> at /build/.../crt1.c:200
         004011F1 in <mainCRTStartup> at /build/.../crt1.c:222

From this traceback we can see that the exception was raised in `stb.adb` at line 5, which was reached from a procedure call in `stb.adb` at line 10, and so on. The `b~std.adb` is the binder file, which contains the call to the main program. See Running gnatbind. The remaining entries are assorted runtime routines, and the output will vary from platform to platform.

It is also possible to use `GDB` with these traceback addresses to debug the program. For example, we can break at a given code location, as reported in the stack traceback:

         $ gdb -nw stb
         Furthermore, this feature is not implemented inside Windows DLL. Only
         the non-symbolic traceback is reported in this case.

         (gdb) break *0x401373
         Breakpoint 1 at 0x401373: file stb.adb, line 5.

It is important to note that the stack traceback addresses do not change when debug information is included. This is particularly useful because it makes it possible to release software without debug information (to minimize object size), get a field report that includes a stack traceback whenever an internal bug occurs, and then be able to retrieve the sequence of calls with the same program compiled with debug information.

Next: Tracebacks From Anywhere in a Program (non-symbolic), Previous: Tracebacks From an Unhandled Exception, Up: Non-Symbolic Traceback

##### 31.14.1.2 Tracebacks From Exception Occurrences

Non-symbolic tracebacks are obtained by using the `-E` binder argument. The stack traceback is attached to the exception information string, and can be retrieved in an exception handler within the Ada program, by means of the Ada facilities defined in `Ada.Exceptions`. Here is a simple example:

         with Ada.Text_IO;
         with Ada.Exceptions;

         procedure STB is

            use Ada;
            use Ada.Exceptions;

            procedure P1 is
               K : Positive := 1;
            begin
               K := K - 1;
            exception
               when E : others =>
                  Text_IO.Put_Line (Exception_Information (E));
            end P1;

            procedure P2 is
            begin
               P1;
            end P2;

         begin
            P2;
         end STB;

This program will output:

         $ stb

         Exception name: CONSTRAINT_ERROR
         Message: stb.adb:12
         Call stack traceback locations:
         0x4015e4 0x401633 0x401644 0x401461 0x4011c4 0x4011f1 0x77e892a4

Previous: Tracebacks From Exception Occurrences (non-symbolic), Up: Non-Symbolic Traceback

##### 31.14.1.3 Tracebacks From Anywhere in a Program

It is also possible to retrieve a stack traceback from anywhere in a program. For this you need to use the `GNAT.Traceback` API. This package includes a procedure called `Call_Chain` that computes a complete stack traceback, as well as useful display procedures described below. It is not necessary to use the `-E gnatbind` option in this case, because the stack traceback mechanism is invoked explicitly.

In the following example we compute a traceback at a specific location in the program, and we display it using `GNAT.Debug_Utilities.Image` to convert addresses to strings:

         with Ada.Text_IO;
         with GNAT.Traceback;
         with GNAT.Debug_Utilities;

         procedure STB is

            use Ada;
            use GNAT;
            use GNAT.Traceback;

            procedure P1 is
               TB  : Tracebacks_Array (1 .. 10);
               --  We are asking for a maximum of 10 stack frames.
               Len : Natural;
               --  Len will receive the actual number of stack frames returned.
            begin
               Call_Chain (TB, Len);

               Text_IO.Put ("In STB.P1 : ");

               for K in 1 .. Len loop
                  Text_IO.Put (Debug_Utilities.Image (TB (K)));
                  Text_IO.Put (' ');
               end loop;

               Text_IO.New_Line;
            end P1;

            procedure P2 is
            begin
               P1;
            end P2;

         begin
            P2;
         end STB;

         $ gnatmake -g stb
         $ stb

         In STB.P1 : 16#0040_F1E4# 16#0040_14F2# 16#0040_170B# 16#0040_171C#
         16#0040_1461# 16#0040_11C4# 16#0040_11F1# 16#77E8_92A4#

You can then get further information by invoking the `addr2line` tool as described earlier (note that the hexadecimal addresses need to be specified in C format, with a leading “0x”).

Previous: Non-Symbolic Traceback, Up: Stack Traceback

#### 31.14.2 Symbolic Traceback

A symbolic traceback is a stack traceback in which procedure names are associated with each code location.

Note that this feature is not supported on all platforms. See `GNAT.Traceback.Symbolic spec in g-trasym.ads` for a complete list of currently supported platforms.

Note that the symbolic traceback requires that the program be compiled with debug information. If it is not compiled with debug information only the non-symbolic information will be valid.

Next: Tracebacks From Anywhere in a Program (symbolic), Up: Symbolic Traceback

##### 31.14.2.1 Tracebacks From Exception Occurrences

         with Ada.Text_IO;
         with GNAT.Traceback.Symbolic;

         procedure STB is

            procedure P1 is
            begin
               raise Constraint_Error;
            end P1;

            procedure P2 is
            begin
               P1;
            end P2;

            procedure P3 is
            begin
               P2;
            end P3;

         begin
            P3;
         exception
            when E : others =>
               Ada.Text_IO.Put_Line (GNAT.Traceback.Symbolic.Symbolic_Traceback (E));
         end STB;

         $ gnatmake -g .\stb -bargs -E -largs -lgnat -laddr2line -lintl
         $ stb

         0040149F in stb.p1 at stb.adb:8
         004014B7 in stb.p2 at stb.adb:13
         004014CF in stb.p3 at stb.adb:18
         004015DD in ada.stb at stb.adb:22
         00401461 in main at b~stb.adb:168
         004011C4 in __mingw_CRTStartup at crt1.c:200
         004011F1 in mainCRTStartup at crt1.c:222
         77E892A4 in ?? at ??:0

In the above example the “.\” syntax in the `gnatmake` command is currently required by `addr2line` for files that are in the current working directory. Moreover, the exact sequence of linker options may vary from platform to platform. The above `-largs` section is for Windows platforms. By contrast, under Unix there is no need for the `-largs` section. Differences across platforms are due to details of linker implementation.

Previous: Tracebacks From Exception Occurrences (symbolic), Up: Symbolic Traceback

##### 31.14.2.2 Tracebacks From Anywhere in a Program

It is possible to get a symbolic stack traceback from anywhere in a program, just as for non-symbolic tracebacks. The first step is to obtain a non-symbolic traceback, and then call `Symbolic_Traceback` to compute the symbolic information. Here is an example:

         with Ada.Text_IO;
         with GNAT.Traceback;
         with GNAT.Traceback.Symbolic;

         procedure STB is

            use Ada;
            use GNAT.Traceback;
            use GNAT.Traceback.Symbolic;

            procedure P1 is
               TB  : Tracebacks_Array (1 .. 10);
               --  We are asking for a maximum of 10 stack frames.
               Len : Natural;
               --  Len will receive the actual number of stack frames returned.
            begin
               Call_Chain (TB, Len);
               Text_IO.Put_Line (Symbolic_Traceback (TB (1 .. Len)));
            end P1;

            procedure P2 is
            begin
               P1;
            end P2;

         begin
            P2;
         end STB;

Next: Example of Binder Output File, Previous: Code Coverage and Profiling, Up: Top

## Appendix A Platform-Specific Information for the Run-Time Libraries

The GNAT run-time implementation may vary with respect to both the underlying threads library and the exception handling scheme. For threads support, one or more of the following are supplied:

- native threads library, a binding to the thread package from the underlying operating system
- pthreads library (Sparc Solaris only), a binding to the Solaris POSIX thread package

For exception handling, either or both of two models are supplied:

- Zero-Cost Exceptions (“ZCX”),1 which uses binder-generated tables that are interrogated at run time to locate a handler
- setjmp / longjmp (“SJLJ”), which uses dynamically-set data to establish the set of handlers

This appendix summarizes which combinations of threads and exception support are supplied on various GNAT platforms. It then shows how to select a particular library either permanently or temporarily, explains the properties of (and tradeoffs among) the various threads libraries, and provides some additional information about several specific platforms.

Next: Specifying a Run-Time Library, Up: Platform-Specific Information for the Run-Time Libraries

### A.1 Summary of Run-Time Configurations

alpha-openvms
rts-native (default)
Tasking | native VMS threads
Exceptions | ZCX
rts-sjlj
Tasking | native TRU64 threads
Exceptions | SJLJ
ia64-hp_linux
rts-native (default)
Tasking | pthread library
Exceptions | ZCX
ia64-hpux
rts-native (default)
Tasking | native HP-UX threads
Exceptions | SJLJ
ia64-openvms
rts-native (default)
Tasking | native VMS threads
Exceptions | ZCX
ia64-sgi_linux
rts-native (default)
Tasking | pthread library
Exceptions | ZCX
pa-hpux
rts-native (default)
Tasking | native HP-UX threads
Exceptions | ZCX
rts-sjlj
Tasking | native HP-UX threads
Exceptions | SJLJ
ppc-aix
rts-native (default)
Tasking | native AIX threads
Exceptions | ZCX
rts-sjlj
Tasking | native AIX threads
Exceptions | SJLJ
ppc-darwin
rts-native (default)
Tasking | native MacOS threads
Exceptions | ZCX
sparc-solaris |
rts-native (default)
Tasking | native Solaris threads library
Exceptions | ZCX
rts-pthread
Tasking | pthread library
Exceptions | ZCX
rts-sjlj
Tasking | native Solaris threads library
Exceptions | SJLJ
sparc64-solaris |
rts-native (default)
Tasking | native Solaris threads library
Exceptions | ZCX
x86-linux
rts-native (default)
Tasking | pthread library
Exceptions | ZCX
rts-sjlj
Tasking | pthread library
Exceptions | SJLJ
x86-lynx
rts-native (default)
Tasking | native LynxOS threads
Exceptions | SJLJ
x86-solaris
rts-native (default)
Tasking | native Solaris threads
Exceptions | ZCX
rts-sjlj
Tasking | native Solaris threads library
Exceptions | SJLJ
x86-windows
rts-native (default)
Tasking | native Win32 threads
Exceptions | ZCX
rts-sjlj
Tasking | native Win32 threads
Exceptions | SJLJ
x86-windows-rtx
rts-rtx-rtss (default)
Tasking | RTX real-time subsystem RTSS threads (kernel mode)
Exceptions | SJLJ
rts-rtx-w32
Tasking | RTX Win32 threads (user mode)
Exceptions | ZCX
x86_64-linux
rts-native (default)
Tasking | pthread library
Exceptions | ZCX
rts-sjlj
Tasking | pthread library
Exceptions | SJLJ

Next: Choosing the Scheduling Policy, Previous: Summary of Run-Time Configurations, Up: Platform-Specific Information for the Run-Time Libraries

### A.2 Specifying a Run-Time Library

The `adainclude` subdirectory containing the sources of the GNAT run-time library, and the `adalib` subdirectory containing the `ALI` files and the static and/or shared GNAT library, are located in the gcc target-dependent area:

         target=$prefix/lib/gcc/gcc-dumpmachine/gcc-dumpversion/

As indicated above, on some platforms several run-time libraries are supplied. These libraries are installed in the target dependent area and contain a complete source and binary subdirectory. The detailed description below explains the differences between the different libraries in terms of their thread support.

The default run-time library (when GNAT is installed) is rts-native. This default run time is selected by the means of soft links. For example on x86-linux:

          $(target-dir)
              |
              +--- adainclude----------+
              |                        |
              +--- adalib-----------+  |
              |                     |  |
              +--- rts-native       |  |
              |    |                |  |
              |    +--- adainclude <---+
              |    |                |
              |    +--- adalib <----+
              |
              +--- rts-sjlj
                   |
                   +--- adainclude
                   |
                   +--- adalib

If the rts-sjlj library is to be selected on a permanent basis, these soft links can be modified with the following commands:

         $ cd $target
         $ rm -f adainclude adalib
         $ ln -s rts-sjlj/adainclude adainclude
         $ ln -s rts-sjlj/adalib adalib

Alternatively, you can specify `rts-sjlj/adainclude` in the file `$target/ada_source_path` and `rts-sjlj/adalib` in `$target/ada_object_path`.

Selecting another run-time library temporarily can be achieved by using the `--RTS` switch, e.g., `--RTS=sjlj`

Next: Solaris-Specific Considerations, Previous: Specifying a Run-Time Library, Up: Platform-Specific Information for the Run-Time Libraries

### A.3 Choosing the Scheduling Policy

When using a POSIX threads implementation, you have a choice of several scheduling policies: `SCHED_FIFO`, `SCHED_RR` and `SCHED_OTHER`. Typically, the default is `SCHED_OTHER`, while using `SCHED_FIFO` or `SCHED_RR` requires special (e.g., root) privileges.

By default, GNAT uses the `SCHED_OTHER` policy. To specify `SCHED_FIFO`, you can use one of the following:

- `pragma Time_Slice (0.0)`
- the corresponding binder option `-T0`
- `pragma Task_Dispatching_Policy (FIFO_Within_Priorities)`

To specify `SCHED_RR`, you should use `pragma Time_Slice` with a value greater than `0.0`, or else use the corresponding `-T` binder option.

Next: Linux-Specific Considerations, Previous: Choosing the Scheduling Policy, Up: Platform-Specific Information for the Run-Time Libraries

### A.4 Solaris-Specific Considerations

This section addresses some topics related to the various threads libraries on Sparc Solaris.

Up: Solaris-Specific Considerations

#### A.4.1 Solaris Threads Issues

GNAT under Solaris/Sparc 32 bits comes with an alternate tasking run-time library based on POSIX threads — rts-pthread. This run-time library has the advantage of being mostly shared across all POSIX-compliant thread implementations, and it also provides under Solaris 8 the `PTHREAD_PRIO_INHERIT` and `PTHREAD_PRIO_PROTECT` semantics that can be selected using the predefined pragma `Locking_Policy` with respectively `Inheritance_Locking` and `Ceiling_Locking` as the policy. As explained above, the native run-time library is based on the Solaris thread library (`libthread`) and is the default library.

When the Solaris threads library is used (this is the default), programs compiled with GNAT can automatically take advantage of and can thus execute on multiple processors. The user can alternatively specify a processor on which the program should run to emulate a single-processor system. The multiprocessor / uniprocessor choice is made by setting the environment variable `GNAT_PROCESSOR` to one of the following:

`-2`
  Use the default configuration (run the program on all available processors) - this is the same as having `GNAT_PROCESSOR` unset
`-1`
  Let the run-time implementation choose one processor and run the program on that processor
`0 .. Last_Proc`
  Run the program on the specified processor. `Last_Proc` is equal to `_SC_NPROCESSORS_CONF - 1` (where `_SC_NPROCESSORS_CONF` is a system variable).

Next: AIX-Specific Considerations, Previous: Solaris-Specific Considerations, Up: Platform-Specific Information for the Run-Time Libraries

### A.5 Linux-Specific Considerations

On GNU/Linux without NPTL support (usually system with GNU C Library older than 2.3), the signal model is not POSIX compliant, which means that to send a signal to the process, you need to send the signal to all threads, e.g. by using `killpg()`.

Next: RTX-Specific Considerations, Previous: Linux-Specific Considerations, Up: Platform-Specific Information for the Run-Time Libraries

### A.6 AIX-Specific Considerations

On AIX, the resolver library initializes some internal structure on the first call to `get*by*` functions, which are used to implement `GNAT.Sockets.Get_Host_By_Name` and `GNAT.Sockets.Get_Host_By_Address`. If such initialization occurs within an Ada task, and the stack size for the task is the default size, a stack overflow may occur.

To avoid this overflow, the user should either ensure that the first call to `GNAT.Sockets.Get_Host_By_Name` or `GNAT.Sockets.Get_Host_By_Addrss` occurs in the environment task, or use `pragma Storage_Size` to specify a sufficiently large size for the stack of the task that contains this call.

Next: HP-UX-Specific Considerations, Previous: AIX-Specific Considerations, Up: Platform-Specific Information for the Run-Time Libraries

### A.7 RTX-Specific Considerations

The Real-time Extension (RTX) to Windows is based on the Windows Win32 API. Applications can be built to work in two different modes:

- Windows executables that run in Ring 3 to utilize memory protection (rts-rtx-w32).
- Real-time subsystem (RTSS) executables that run in Ring 0, where performance can be optimized with RTSS applications taking precedent over all Windows applications (rts-rtx-rtss). This mode requires the Microsoft linker to handle RTSS libraries.

Previous: RTX-Specific Considerations, Up: Platform-Specific Information for the Run-Time Libraries

### A.8 HP-UX-Specific Considerations

On HP-UX, appropriate privileges are required to change the scheduling parameters of a task. The calling process must have appropriate privileges or be a member of a group having `PRIV_RTSCHED` access to successfully change the scheduling parameters.

By default, GNAT uses the `SCHED_HPUX` policy. To have access to the priority range 0-31 either the `FIFO_Within_Priorities` or the `Round_Robin_Within_Priorities` scheduling policies need to be set.

To specify the `FIFO_Within_Priorities` scheduling policy you can use one of the following:

- `pragma Time_Slice (0.0)`
- the corresponding binder option `-T0`
- `pragma Task_Dispatching_Policy (FIFO_Within_Priorities)`

To specify the `Round_Robin_Within_Priorities`, scheduling policy you should use `pragma Time_Slice` with a value greater than `0.0`, or use the corresponding `-T` binder option, or set the `pragma Task_Dispatching_Policy (Round_Robin_Within_Priorities)`.

Next: Elaboration Order Handling in GNAT, Previous: Platform-Specific Information for the Run-Time Libraries, Up: Top

## Appendix B Example of Binder Output File

This Appendix displays the source code for `gnatbind`'s output file generated for a simple “Hello World” program. Comments have been added for clarification purposes.

         --  The package is called Ada_Main unless this name is actually used
         --  as a unit name in the partition, in which case some other unique
         --  name is used.

         with System;
         package ada_main is

            Elab_Final_Code : Integer;
            pragma Import (C, Elab_Final_Code, "__gnat_inside_elab_final_code");

            --  The main program saves the parameters (argument count,
            --  argument values, environment pointer) in global variables
            --  for later access by other units including
            --  Ada.Command_Line.

            gnat_argc : Integer;
            gnat_argv : System.Address;
            gnat_envp : System.Address;

            --  The actual variables are stored in a library routine. This
            --  is useful for some shared library situations, where there
            --  are problems if variables are not in the library.

            pragma Import (C, gnat_argc);
            pragma Import (C, gnat_argv);
            pragma Import (C, gnat_envp);

            --  The exit status is similarly an external location

            gnat_exit_status : Integer;
            pragma Import (C, gnat_exit_status);

            GNAT_Version : constant String :=
                             "GNAT Version: 6.0.0w (20061115)";
            pragma Export (C, GNAT_Version, "__gnat_version");

            --  This is the generated adafinal routine that performs
            --  finalization at the end of execution. In the case where
            --  Ada is the main program, this main program makes a call
            --  to adafinal at program termination.

            procedure adafinal;
            pragma Export (C, adafinal, "adafinal");

            --  This is the generated adainit routine that performs
            --  initialization at the start of execution. In the case
            --  where Ada is the main program, this main program makes
            --  a call to adainit at program startup.

            procedure adainit;
            pragma Export (C, adainit, "adainit");

            --  This routine is called at the start of execution. It is
            --  a dummy routine that is used by the debugger to breakpoint
            --  at the start of execution.

            procedure Break_Start;
            pragma Import (C, Break_Start, "__gnat_break_start");

            --  This is the actual generated main program (it would be
            --  suppressed if the no main program switch were used). As
            --  required by standard system conventions, this program has
            --  the external name main.

            function main
              (argc : Integer;
               argv : System.Address;
               envp : System.Address)
               return Integer;
            pragma Export (C, main, "main");

            --  The following set of constants give the version
            --  identification values for every unit in the bound
            --  partition. This identification is computed from all
            --  dependent semantic units, and corresponds to the
            --  string that would be returned by use of the
            --  Body_Version or Version attributes.

            type Version_32 is mod 2 ** 32;
            u00001 : constant Version_32 := 16#7880BEB3#;
            u00002 : constant Version_32 := 16#0D24CBD0#;
            u00003 : constant Version_32 := 16#3283DBEB#;
            u00004 : constant Version_32 := 16#2359F9ED#;
            u00005 : constant Version_32 := 16#664FB847#;
            u00006 : constant Version_32 := 16#68E803DF#;
            u00007 : constant Version_32 := 16#5572E604#;
            u00008 : constant Version_32 := 16#46B173D8#;
            u00009 : constant Version_32 := 16#156A40CF#;
            u00010 : constant Version_32 := 16#033DABE0#;
            u00011 : constant Version_32 := 16#6AB38FEA#;
            u00012 : constant Version_32 := 16#22B6217D#;
            u00013 : constant Version_32 := 16#68A22947#;
            u00014 : constant Version_32 := 16#18CC4A56#;
            u00015 : constant Version_32 := 16#08258E1B#;
            u00016 : constant Version_32 := 16#367D5222#;
            u00017 : constant Version_32 := 16#20C9ECA4#;
            u00018 : constant Version_32 := 16#50D32CB6#;
            u00019 : constant Version_32 := 16#39A8BB77#;
            u00020 : constant Version_32 := 16#5CF8FA2B#;
            u00021 : constant Version_32 := 16#2F1EB794#;
            u00022 : constant Version_32 := 16#31AB6444#;
            u00023 : constant Version_32 := 16#1574B6E9#;
            u00024 : constant Version_32 := 16#5109C189#;
            u00025 : constant Version_32 := 16#56D770CD#;
            u00026 : constant Version_32 := 16#02F9DE3D#;
            u00027 : constant Version_32 := 16#08AB6B2C#;
            u00028 : constant Version_32 := 16#3FA37670#;
            u00029 : constant Version_32 := 16#476457A0#;
            u00030 : constant Version_32 := 16#731E1B6E#;
            u00031 : constant Version_32 := 16#23C2E789#;
            u00032 : constant Version_32 := 16#0F1BD6A1#;
            u00033 : constant Version_32 := 16#7C25DE96#;
            u00034 : constant Version_32 := 16#39ADFFA2#;
            u00035 : constant Version_32 := 16#571DE3E7#;
            u00036 : constant Version_32 := 16#5EB646AB#;
            u00037 : constant Version_32 := 16#4249379B#;
            u00038 : constant Version_32 := 16#0357E00A#;
            u00039 : constant Version_32 := 16#3784FB72#;
            u00040 : constant Version_32 := 16#2E723019#;
            u00041 : constant Version_32 := 16#623358EA#;
            u00042 : constant Version_32 := 16#107F9465#;
            u00043 : constant Version_32 := 16#6843F68A#;
            u00044 : constant Version_32 := 16#63305874#;
            u00045 : constant Version_32 := 16#31E56CE1#;
            u00046 : constant Version_32 := 16#02917970#;
            u00047 : constant Version_32 := 16#6CCBA70E#;
            u00048 : constant Version_32 := 16#41CD4204#;
            u00049 : constant Version_32 := 16#572E3F58#;
            u00050 : constant Version_32 := 16#20729FF5#;
            u00051 : constant Version_32 := 16#1D4F93E8#;
            u00052 : constant Version_32 := 16#30B2EC3D#;
            u00053 : constant Version_32 := 16#34054F96#;
            u00054 : constant Version_32 := 16#5A199860#;
            u00055 : constant Version_32 := 16#0E7F912B#;
            u00056 : constant Version_32 := 16#5760634A#;
            u00057 : constant Version_32 := 16#5D851835#;

            --  The following Export pragmas export the version numbers
            --  with symbolic names ending in B (for body) or S
            --  (for spec) so that they can be located in a link. The
            --  information provided here is sufficient to track down
            --  the exact versions of units used in a given build.

            pragma Export (C, u00001, "helloB");
            pragma Export (C, u00002, "system__standard_libraryB");
            pragma Export (C, u00003, "system__standard_libraryS");
            pragma Export (C, u00004, "adaS");
            pragma Export (C, u00005, "ada__text_ioB");
            pragma Export (C, u00006, "ada__text_ioS");
            pragma Export (C, u00007, "ada__exceptionsB");
            pragma Export (C, u00008, "ada__exceptionsS");
            pragma Export (C, u00009, "gnatS");
            pragma Export (C, u00010, "gnat__heap_sort_aB");
            pragma Export (C, u00011, "gnat__heap_sort_aS");
            pragma Export (C, u00012, "systemS");
            pragma Export (C, u00013, "system__exception_tableB");
            pragma Export (C, u00014, "system__exception_tableS");
            pragma Export (C, u00015, "gnat__htableB");
            pragma Export (C, u00016, "gnat__htableS");
            pragma Export (C, u00017, "system__exceptionsS");
            pragma Export (C, u00018, "system__machine_state_operationsB");
            pragma Export (C, u00019, "system__machine_state_operationsS");
            pragma Export (C, u00020, "system__machine_codeS");
            pragma Export (C, u00021, "system__storage_elementsB");
            pragma Export (C, u00022, "system__storage_elementsS");
            pragma Export (C, u00023, "system__secondary_stackB");
            pragma Export (C, u00024, "system__secondary_stackS");
            pragma Export (C, u00025, "system__parametersB");
            pragma Export (C, u00026, "system__parametersS");
            pragma Export (C, u00027, "system__soft_linksB");
            pragma Export (C, u00028, "system__soft_linksS");
            pragma Export (C, u00029, "system__stack_checkingB");
            pragma Export (C, u00030, "system__stack_checkingS");
            pragma Export (C, u00031, "system__tracebackB");
            pragma Export (C, u00032, "system__tracebackS");
            pragma Export (C, u00033, "ada__streamsS");
            pragma Export (C, u00034, "ada__tagsB");
            pragma Export (C, u00035, "ada__tagsS");
            pragma Export (C, u00036, "system__string_opsB");
            pragma Export (C, u00037, "system__string_opsS");
            pragma Export (C, u00038, "interfacesS");
            pragma Export (C, u00039, "interfaces__c_streamsB");
            pragma Export (C, u00040, "interfaces__c_streamsS");
            pragma Export (C, u00041, "system__file_ioB");
            pragma Export (C, u00042, "system__file_ioS");
            pragma Export (C, u00043, "ada__finalizationB");
            pragma Export (C, u00044, "ada__finalizationS");
            pragma Export (C, u00045, "system__finalization_rootB");
            pragma Export (C, u00046, "system__finalization_rootS");
            pragma Export (C, u00047, "system__finalization_implementationB");
            pragma Export (C, u00048, "system__finalization_implementationS");
            pragma Export (C, u00049, "system__string_ops_concat_3B");
            pragma Export (C, u00050, "system__string_ops_concat_3S");
            pragma Export (C, u00051, "system__stream_attributesB");
            pragma Export (C, u00052, "system__stream_attributesS");
            pragma Export (C, u00053, "ada__io_exceptionsS");
            pragma Export (C, u00054, "system__unsigned_typesS");
            pragma Export (C, u00055, "system__file_control_blockS");
            pragma Export (C, u00056, "ada__finalization__list_controllerB");
            pragma Export (C, u00057, "ada__finalization__list_controllerS");

            -- BEGIN ELABORATION ORDER
            -- ada (spec)
            -- gnat (spec)
            -- gnat.heap_sort_a (spec)
            -- gnat.heap_sort_a (body)
            -- gnat.htable (spec)
            -- gnat.htable (body)
            -- interfaces (spec)
            -- system (spec)
            -- system.machine_code (spec)
            -- system.parameters (spec)
            -- system.parameters (body)
            -- interfaces.c_streams (spec)
            -- interfaces.c_streams (body)
            -- system.standard_library (spec)
            -- ada.exceptions (spec)
            -- system.exception_table (spec)
            -- system.exception_table (body)
            -- ada.io_exceptions (spec)
            -- system.exceptions (spec)
            -- system.storage_elements (spec)
            -- system.storage_elements (body)
            -- system.machine_state_operations (spec)
            -- system.machine_state_operations (body)
            -- system.secondary_stack (spec)
            -- system.stack_checking (spec)
            -- system.soft_links (spec)
            -- system.soft_links (body)
            -- system.stack_checking (body)
            -- system.secondary_stack (body)
            -- system.standard_library (body)
            -- system.string_ops (spec)
            -- system.string_ops (body)
            -- ada.tags (spec)
            -- ada.tags (body)
            -- ada.streams (spec)
            -- system.finalization_root (spec)
            -- system.finalization_root (body)
            -- system.string_ops_concat_3 (spec)
            -- system.string_ops_concat_3 (body)
            -- system.traceback (spec)
            -- system.traceback (body)
            -- ada.exceptions (body)
            -- system.unsigned_types (spec)
            -- system.stream_attributes (spec)
            -- system.stream_attributes (body)
            -- system.finalization_implementation (spec)
            -- system.finalization_implementation (body)
            -- ada.finalization (spec)
            -- ada.finalization (body)
            -- ada.finalization.list_controller (spec)
            -- ada.finalization.list_controller (body)
            -- system.file_control_block (spec)
            -- system.file_io (spec)
            -- system.file_io (body)
            -- ada.text_io (spec)
            -- ada.text_io (body)
            -- hello (body)
            -- END ELABORATION ORDER

         end ada_main;

         --  The following source file name pragmas allow the generated file
         --  names to be unique for different main programs. They are needed
         --  since the package name will always be Ada_Main.

         pragma Source_File_Name (ada_main, Spec_File_Name => "b~hello.ads");
         pragma Source_File_Name (ada_main, Body_File_Name => "b~hello.adb");

         --  Generated package body for Ada_Main starts here

         package body ada_main is

            --  The actual finalization is performed by calling the
            --  library routine in System.Standard_Library.Adafinal

            procedure Do_Finalize;
            pragma Import (C, Do_Finalize, "system__standard_library__adafinal");

            -------------
            -- adainit --
            -------------

            procedure adainit is

               --  These booleans are set to True once the associated unit has
               --  been elaborated. It is also used to avoid elaborating the
               --  same unit twice.

               E040 : Boolean;
               pragma Import (Ada, E040, "interfaces__c_streams_E");

               E008 : Boolean;
               pragma Import (Ada, E008, "ada__exceptions_E");

               E014 : Boolean;
               pragma Import (Ada, E014, "system__exception_table_E");

               E053 : Boolean;
               pragma Import (Ada, E053, "ada__io_exceptions_E");

               E017 : Boolean;
               pragma Import (Ada, E017, "system__exceptions_E");

               E024 : Boolean;
               pragma Import (Ada, E024, "system__secondary_stack_E");

               E030 : Boolean;
               pragma Import (Ada, E030, "system__stack_checking_E");

               E028 : Boolean;
               pragma Import (Ada, E028, "system__soft_links_E");

               E035 : Boolean;
               pragma Import (Ada, E035, "ada__tags_E");

               E033 : Boolean;
               pragma Import (Ada, E033, "ada__streams_E");

               E046 : Boolean;
               pragma Import (Ada, E046, "system__finalization_root_E");

               E048 : Boolean;
               pragma Import (Ada, E048, "system__finalization_implementation_E");

               E044 : Boolean;
               pragma Import (Ada, E044, "ada__finalization_E");

               E057 : Boolean;
               pragma Import (Ada, E057, "ada__finalization__list_controller_E");

               E055 : Boolean;
               pragma Import (Ada, E055, "system__file_control_block_E");

               E042 : Boolean;
               pragma Import (Ada, E042, "system__file_io_E");

               E006 : Boolean;
               pragma Import (Ada, E006, "ada__text_io_E");

               --  Set_Globals is a library routine that stores away the
               --  value of the indicated set of global values in global
               --  variables within the library.

               procedure Set_Globals
                 (Main_Priority            : Integer;
                  Time_Slice_Value         : Integer;
                  WC_Encoding              : Character;
                  Locking_Policy           : Character;
                  Queuing_Policy           : Character;
                  Task_Dispatching_Policy  : Character;
                  Adafinal                 : System.Address;
                  Unreserve_All_Interrupts : Integer;
                  Exception_Tracebacks     : Integer);
               pragma Import (C, Set_Globals, "__gnat_set_globals");

               --  SDP_Table_Build is a library routine used to build the
               --  exception tables. See unit Ada.Exceptions in files
               --  a-except.ads/adb for full details of how zero cost
               --  exception handling works. This procedure, the call to
               --  it, and the two following tables are all omitted if the
               --  build is in longjmp/setjmp exception mode.

               procedure SDP_Table_Build
                 (SDP_Addresses   : System.Address;
                  SDP_Count       : Natural;
                  Elab_Addresses  : System.Address;
                  Elab_Addr_Count : Natural);
               pragma Import (C, SDP_Table_Build, "__gnat_SDP_Table_Build");

               --  Table of Unit_Exception_Table addresses. Used for zero
               --  cost exception handling to build the top level table.

               ST : aliased constant array (1 .. 23) of System.Address := (
                 Hello'UET_Address,
                 Ada.Text_Io'UET_Address,
                 Ada.Exceptions'UET_Address,
                 Gnat.Heap_Sort_A'UET_Address,
                 System.Exception_Table'UET_Address,
                 System.Machine_State_Operations'UET_Address,
                 System.Secondary_Stack'UET_Address,
                 System.Parameters'UET_Address,
                 System.Soft_Links'UET_Address,
                 System.Stack_Checking'UET_Address,
                 System.Traceback'UET_Address,
                 Ada.Streams'UET_Address,
                 Ada.Tags'UET_Address,
                 System.String_Ops'UET_Address,
                 Interfaces.C_Streams'UET_Address,
                 System.File_Io'UET_Address,
                 Ada.Finalization'UET_Address,
                 System.Finalization_Root'UET_Address,
                 System.Finalization_Implementation'UET_Address,
                 System.String_Ops_Concat_3'UET_Address,
                 System.Stream_Attributes'UET_Address,
                 System.File_Control_Block'UET_Address,
                 Ada.Finalization.List_Controller'UET_Address);

               --  Table of addresses of elaboration routines. Used for
               --  zero cost exception handling to make sure these
               --  addresses are included in the top level procedure
               --  address table.

               EA : aliased constant array (1 .. 23) of System.Address := (
                 adainit'Code_Address,
                 Do_Finalize'Code_Address,
                 Ada.Exceptions'Elab_Spec'Address,
                 System.Exceptions'Elab_Spec'Address,
                 Interfaces.C_Streams'Elab_Spec'Address,
                 System.Exception_Table'Elab_Body'Address,
                 Ada.Io_Exceptions'Elab_Spec'Address,
                 System.Stack_Checking'Elab_Spec'Address,
                 System.Soft_Links'Elab_Body'Address,
                 System.Secondary_Stack'Elab_Body'Address,
                 Ada.Tags'Elab_Spec'Address,
                 Ada.Tags'Elab_Body'Address,
                 Ada.Streams'Elab_Spec'Address,
                 System.Finalization_Root'Elab_Spec'Address,
                 Ada.Exceptions'Elab_Body'Address,
                 System.Finalization_Implementation'Elab_Spec'Address,
                 System.Finalization_Implementation'Elab_Body'Address,
                 Ada.Finalization'Elab_Spec'Address,
                 Ada.Finalization.List_Controller'Elab_Spec'Address,
                 System.File_Control_Block'Elab_Spec'Address,
                 System.File_Io'Elab_Body'Address,
                 Ada.Text_Io'Elab_Spec'Address,
                 Ada.Text_Io'Elab_Body'Address);

            --  Start of processing for adainit

            begin

               --  Call SDP_Table_Build to build the top level procedure
               --  table for zero cost exception handling (omitted in
               --  longjmp/setjmp mode).

               SDP_Table_Build (ST'Address, 23, EA'Address, 23);

               --  Call Set_Globals to record various information for
               --  this partition.  The values are derived by the binder
               --  from information stored in the ali files by the compiler.

               Set_Globals
                 (Main_Priority            => -1,
                  --  Priority of main program, -1 if no pragma Priority used

                  Time_Slice_Value         => -1,
                  --  Time slice from Time_Slice pragma, -1 if none used

                  WC_Encoding              => 'b',
                  --  Wide_Character encoding used, default is brackets

                  Locking_Policy           => ' ',
                  --  Locking_Policy used, default of space means not
                  --  specified, otherwise it is the first character of
                  --  the policy name.

                  Queuing_Policy           => ' ',
                  --  Queuing_Policy used, default of space means not
                  --  specified, otherwise it is the first character of
                  --  the policy name.

                  Task_Dispatching_Policy  => ' ',
                  --  Task_Dispatching_Policy used, default of space means
                  --  not specified, otherwise first character of the
                  --  policy name.

                  Adafinal                 => System.Null_Address,
                  --  Address of Adafinal routine, not used anymore

                  Unreserve_All_Interrupts => 0,
                  --  Set true if pragma Unreserve_All_Interrupts was used

                  Exception_Tracebacks     => 0);
                  --  Indicates if exception tracebacks are enabled

               Elab_Final_Code := 1;

               --  Now we have the elaboration calls for all units in the partition.
               --  The Elab_Spec and Elab_Body attributes generate references to the
               --  implicit elaboration procedures generated by the compiler for
               --  each unit that requires elaboration.

               if not E040 then
                  Interfaces.C_Streams'Elab_Spec;
               end if;
               E040 := True;
               if not E008 then
                  Ada.Exceptions'Elab_Spec;
               end if;
               if not E014 then
                  System.Exception_Table'Elab_Body;
                  E014 := True;
               end if;
               if not E053 then
                  Ada.Io_Exceptions'Elab_Spec;
                  E053 := True;
               end if;
               if not E017 then
                  System.Exceptions'Elab_Spec;
                  E017 := True;
               end if;
               if not E030 then
                  System.Stack_Checking'Elab_Spec;
               end if;
               if not E028 then
                  System.Soft_Links'Elab_Body;
                  E028 := True;
               end if;
               E030 := True;
               if not E024 then
                  System.Secondary_Stack'Elab_Body;
                  E024 := True;
               end if;
               if not E035 then
                  Ada.Tags'Elab_Spec;
               end if;
               if not E035 then
                  Ada.Tags'Elab_Body;
                  E035 := True;
               end if;
               if not E033 then
                  Ada.Streams'Elab_Spec;
                  E033 := True;
               end if;
               if not E046 then
                  System.Finalization_Root'Elab_Spec;
               end if;
               E046 := True;
               if not E008 then
                  Ada.Exceptions'Elab_Body;
                  E008 := True;
               end if;
               if not E048 then
                  System.Finalization_Implementation'Elab_Spec;
               end if;
               if not E048 then
                  System.Finalization_Implementation'Elab_Body;
                  E048 := True;
               end if;
               if not E044 then
                  Ada.Finalization'Elab_Spec;
               end if;
               E044 := True;
               if not E057 then
                  Ada.Finalization.List_Controller'Elab_Spec;
               end if;
               E057 := True;
               if not E055 then
                  System.File_Control_Block'Elab_Spec;
                  E055 := True;
               end if;
               if not E042 then
                  System.File_Io'Elab_Body;
                  E042 := True;
               end if;
               if not E006 then
                  Ada.Text_Io'Elab_Spec;
               end if;
               if not E006 then
                  Ada.Text_Io'Elab_Body;
                  E006 := True;
               end if;

               Elab_Final_Code := 0;
            end adainit;

            --------------
            -- adafinal --
            --------------

            procedure adafinal is
            begin
               Do_Finalize;
            end adafinal;

            ----------
            -- main --
            ----------

            --  main is actually a function, as in the ANSI C standard,
            --  defined to return the exit status. The three parameters
            --  are the argument count, argument values and environment
            --  pointer.

            function main
              (argc : Integer;
               argv : System.Address;
               envp : System.Address)
               return Integer
            is
               --  The initialize routine performs low level system
               --  initialization using a standard library routine which
               --  sets up signal handling and performs any other
               --  required setup. The routine can be found in file
               --  a-init.c.

               procedure initialize;
               pragma Import (C, initialize, "__gnat_initialize");

               --  The finalize routine performs low level system
               --  finalization using a standard library routine. The
               --  routine is found in file a-final.c and in the standard
               --  distribution is a dummy routine that does nothing, so
               --  really this is a hook for special user finalization.

               procedure finalize;
               pragma Import (C, finalize, "__gnat_finalize");

               --  We get to the main program of the partition by using
               --  pragma Import because if we try to with the unit and
               --  call it Ada style, then not only do we waste time
               --  recompiling it, but also, we don't really know the right
               --  switches (e.g. identifier character set) to be used
               --  to compile it.

               procedure Ada_Main_Program;
               pragma Import (Ada, Ada_Main_Program, "_ada_hello");

            --  Start of processing for main

            begin
               --  Save global variables

               gnat_argc := argc;
               gnat_argv := argv;
               gnat_envp := envp;

               --  Call low level system initialization

               Initialize;

               --  Call our generated Ada initialization routine

               adainit;

               --  This is the point at which we want the debugger to get
               --  control

               Break_Start;

               --  Now we call the main program of the partition

               Ada_Main_Program;

               --  Perform Ada finalization

               adafinal;

               --  Perform low level system finalization

               Finalize;

               --  Return the proper exit status
               return (gnat_exit_status);
            end;

         --  This section is entirely comments, so it has no effect on the
         --  compilation of the Ada_Main package. It provides the list of
         --  object files and linker options, as well as some standard
         --  libraries needed for the link. The gnatlink utility parses
         --  this b~hello.adb file to read these comment lines to generate
         --  the appropriate command line arguments for the call to the
         --  system linker. The BEGIN/END lines are used for sentinels for
         --  this parsing operation.

         --  The exact file names will of course depend on the environment,
         --  host/target and location of files on the host system.

         -- BEGIN Object file/option list
            --   ./hello.o
            --   -L./
            --   -L/usr/local/gnat/lib/gcc-lib/i686-pc-linux-gnu/2.8.1/adalib/
            --   /usr/local/gnat/lib/gcc-lib/i686-pc-linux-gnu/2.8.1/adalib/libgnat.a
         -- END Object file/option list

         end ada_main;

The Ada code in the above example is exactly what is generated by the binder. We have added comments to more clearly indicate the function of each part of the generated `Ada_Main` package.

The code is standard Ada in all respects, and can be processed by any tools that handle Ada. In particular, it is possible to use the debugger in Ada mode to debug the generated `Ada_Main` package. For example, suppose that for reasons that you do not understand, your program is crashing during elaboration of the body of `Ada.Text_IO`. To locate this bug, you can place a breakpoint on the call:

         Ada.Text_Io'Elab_Body;

and trace the elaboration routine for this package to find out where the problem might be (more usually of course you would be debugging elaboration code in your own application).

Next: Overflow Check Handling in GNAT, Previous: Example of Binder Output File, Up: Top

## Appendix C Elaboration Order Handling in GNAT

This chapter describes the handling of elaboration code in Ada and in GNAT, and discusses how the order of elaboration of program units can be controlled in GNAT, either automatically or with explicit programming features.

Next: Checking the Elaboration Order, Up: Elaboration Order Handling in GNAT

### C.1 Elaboration Code

Ada provides rather general mechanisms for executing code at elaboration time, that is to say before the main program starts executing. Such code arises in three contexts:

Initializers for variables.
  Variables declared at the library level, in package specs or bodies, can require initialization that is performed at elaboration time, as in:

                Sqrt_Half : Float := Sqrt (0.5);

Package initialization code
  Code in a `BEGIN-END` section at the outer level of a package body is executed as part of the package body elaboration code.
Library level task allocators
  Tasks that are declared using task allocators at the library level start executing immediately and hence can execute at elaboration time.

Subprogram calls are possible in any of these contexts, which means that any arbitrary part of the program may be executed as part of the elaboration code. It is even possible to write a program which does all its work at elaboration time, with a null main program, although stylistically this would usually be considered an inappropriate way to structure a program.

An important concern arises in the context of elaboration code: we have to be sure that it is executed in an appropriate order. What we have is a series of elaboration code sections, potentially one section for each unit in the program. It is important that these execute in the correct order. Correctness here means that, taking the above example of the declaration of `Sqrt_Half`, if some other piece of elaboration code references `Sqrt_Half`, then it must run after the section of elaboration code that contains the declaration of `Sqrt_Half`.

There would never be any order of elaboration problem if we made a rule that whenever you `with` a unit, you must elaborate both the spec and body of that unit before elaborating the unit doing the `with`'ing:

         with Unit_1;
         package Unit_2 is ...

would require that both the body and spec of `Unit_1` be elaborated before the spec of `Unit_2`. However, a rule like that would be far too restrictive. In particular, it would make it impossible to have routines in separate packages that were mutually recursive.

You might think that a clever enough compiler could look at the actual elaboration code and determine an appropriate correct order of elaboration, but in the general case, this is not possible. Consider the following example.

In the body of `Unit_1`, we have a procedure `Func_1` that references the variable `Sqrt_1`, which is declared in the elaboration code of the body of `Unit_1`:

         Sqrt_1 : Float := Sqrt (0.1);

The elaboration code of the body of `Unit_1` also contains:

         if expression_1 = 1 then
            Q := Unit_2.Func_2;
         end if;

`Unit_2` is exactly parallel, it has a procedure `Func_2` that references the variable `Sqrt_2`, which is declared in the elaboration code of the body `Unit_2`:

         Sqrt_2 : Float := Sqrt (0.1);

The elaboration code of the body of `Unit_2` also contains:

         if expression_2 = 2 then
            Q := Unit_1.Func_1;
         end if;

Now the question is, which of the following orders of elaboration is acceptable:

         Spec of Unit_1
         Spec of Unit_2
         Body of Unit_1
         Body of Unit_2

or

         Spec of Unit_2
         Spec of Unit_1
         Body of Unit_2
         Body of Unit_1

If you carefully analyze the flow here, you will see that you cannot tell at compile time the answer to this question. If `expression_1` is not equal to 1, and `expression_2` is not equal to 2, then either order is acceptable, because neither of the function calls is executed. If both tests evaluate to true, then neither order is acceptable and in fact there is no correct order.

If one of the two expressions is true, and the other is false, then one of the above orders is correct, and the other is incorrect. For example, if `expression_1` /= 1 and `expression_2` = 2, then the call to `Func_1` will occur, but not the call to `Func_2.` This means that it is essential to elaborate the body of `Unit_1` before the body of `Unit_2`, so the first order of elaboration is correct and the second is wrong.

By making `expression_1` and `expression_2` depend on input data, or perhaps the time of day, we can make it impossible for the compiler or binder to figure out which of these expressions will be true, and hence it is impossible to guarantee a safe order of elaboration at run time.

Next: Controlling the Elaboration Order, Previous: Elaboration Code, Up: Elaboration Order Handling in GNAT

### C.2 Checking the Elaboration Order

In some languages that involve the same kind of elaboration problems, e.g. Java and C++, the programmer is expected to worry about these ordering problems himself, and it is common to write a program in which an incorrect elaboration order gives surprising results, because it references variables before they are initialized. Ada is designed to be a safe language, and a programmer-beware approach is clearly not sufficient. Consequently, the language provides three lines of defense:

Standard rules
  Some standard rules restrict the possible choice of elaboration order. In particular, if you `with` a unit, then its spec is always elaborated before the unit doing the `with`. Similarly, a parent spec is always elaborated before the child spec, and finally a spec is always elaborated before its corresponding body.
Dynamic elaboration checks
  Dynamic checks are made at run time, so that if some entity is accessed before it is elaborated (typically by means of a subprogram call) then the exception (`Program_Error`) is raised.
Elaboration control
  Facilities are provided for the programmer to specify the desired order of elaboration.

Let's look at these facilities in more detail. First, the rules for dynamic checking. One possible rule would be simply to say that the exception is raised if you access a variable which has not yet been elaborated. The trouble with this approach is that it could require expensive checks on every variable reference. Instead Ada has two rules which are a little more restrictive, but easier to check, and easier to state:

Restrictions on calls
  A subprogram can only be called at elaboration time if its body has been elaborated. The rules for elaboration given above guarantee that the spec of the subprogram has been elaborated before the call, but not the body. If this rule is violated, then the exception `Program_Error` is raised.
Restrictions on instantiations
  A generic unit can only be instantiated if the body of the generic unit has been elaborated. Again, the rules for elaboration given above guarantee that the spec of the generic unit has been elaborated before the instantiation, but not the body. If this rule is violated, then the exception `Program_Error` is raised.

The idea is that if the body has been elaborated, then any variables it references must have been elaborated; by checking for the body being elaborated we guarantee that none of its references causes any trouble. As we noted above, this is a little too restrictive, because a subprogram that has no non-local references in its body may in fact be safe to call. However, it really would be unsafe to rely on this, because it would mean that the caller was aware of details of the implementation in the body. This goes against the basic tenets of Ada.

A plausible implementation can be described as follows. A Boolean variable is associated with each subprogram and each generic unit. This variable is initialized to False, and is set to True at the point body is elaborated. Every call or instantiation checks the variable, and raises `Program_Error` if the variable is False.

Note that one might think that it would be good enough to have one Boolean variable for each package, but that would not deal with cases of trying to call a body in the same package as the call that has not been elaborated yet. Of course a compiler may be able to do enough analysis to optimize away some of the Boolean variables as unnecessary, and `GNAT` indeed does such optimizations, but still the easiest conceptual model is to think of there being one variable per subprogram.

Next: Controlling Elaboration in GNAT - Internal Calls, Previous: Checking the Elaboration Order, Up: Elaboration Order Handling in GNAT

### C.3 Controlling the Elaboration Order

In the previous section we discussed the rules in Ada which ensure that `Program_Error` is raised if an incorrect elaboration order is chosen. This prevents erroneous executions, but we need mechanisms to specify a correct execution and avoid the exception altogether. To achieve this, Ada provides a number of features for controlling the order of elaboration. We discuss these features in this section.

First, there are several ways of indicating to the compiler that a given unit has no elaboration problems:

packages that do not require a body
  A library package that does not require a body does not permit a body (this rule was introduced in Ada 95). Thus if we have a such a package, as in:

                package Definitions is
                   generic
                      type m is new integer;
                   package Subp is
                      type a is array (1 .. 10) of m;
                      type b is array (1 .. 20) of m;
                   end Subp;
                end Definitions;

  A package that `with`'s `Definitions` may safely instantiate `Definitions.Subp` because the compiler can determine that there definitely is no package body to worry about in this case

pragma Pure
  Places sufficient restrictions on a unit to guarantee that no call to any subprogram in the unit can result in an elaboration problem. This means that the compiler does not need to worry about the point of elaboration of such units, and in particular, does not need to check any calls to any subprograms in this unit.
pragma Preelaborate
  This pragma places slightly less stringent restrictions on a unit than does pragma Pure, but these restrictions are still sufficient to ensure that there are no elaboration problems with any calls to the unit.
pragma Elaborate_Body
  This pragma requires that the body of a unit be elaborated immediately after its spec. Suppose a unit `A` has such a pragma, and unit `B` does a `with` of unit `A`. Recall that the standard rules require the spec of unit `A` to be elaborated before the `with`'ing unit; given the pragma in `A`, we also know that the body of `A` will be elaborated before `B`, so that calls to `A` are safe and do not need a check.

Note that, unlike pragma `Pure` and pragma `Preelaborate`, the use of `Elaborate_Body` does not guarantee that the program is free of elaboration problems, because it may not be possible to satisfy the requested elaboration order. Let's go back to the example with `Unit_1` and `Unit_2`. If a programmer marks `Unit_1` as `Elaborate_Body`, and not `Unit_2,` then the order of elaboration will be:

         Spec of Unit_2
         Spec of Unit_1
         Body of Unit_1
         Body of Unit_2

Now that means that the call to `Func_1` in `Unit_2` need not be checked, it must be safe. But the call to `Func_2` in `Unit_1` may still fail if `Expression_1` is equal to 1, and the programmer must still take responsibility for this not being the case.

If all units carry a pragma `Elaborate_Body`, then all problems are eliminated, except for calls entirely within a body, which are in any case fully under programmer control. However, using the pragma everywhere is not always possible. In particular, for our `Unit_1`/`Unit_2` example, if we marked both of them as having pragma `Elaborate_Body`, then clearly there would be no possible elaboration order.

The above pragmas allow a server to guarantee safe use by clients, and clearly this is the preferable approach. Consequently a good rule is to mark units as `Pure` or `Preelaborate` if possible, and if this is not possible, mark them as `Elaborate_Body` if possible. As we have seen, there are situations where neither of these three pragmas can be used. So we also provide methods for clients to control the order of elaboration of the servers on which they depend:

pragma Elaborate (unit)
  This pragma is placed in the context clause, after a `with` clause, and it requires that the body of the named unit be elaborated before the unit in which the pragma occurs. The idea is to use this pragma if the current unit calls at elaboration time, directly or indirectly, some subprogram in the named unit.
pragma Elaborate_All (unit)
  This is a stronger version of the Elaborate pragma. Consider the following example:

                Unit A with's unit B and calls B.Func in elab code
                Unit B with's unit C, and B.Func calls C.Func

  Now if we put a pragma `Elaborate (B)` in unit `A`, this ensures that the body of `B` is elaborated before the call, but not the body of `C`, so the call to `C.Func` could still cause `Program_Error` to be raised.

  The effect of a pragma `Elaborate_All` is stronger, it requires not only that the body of the named unit be elaborated before the unit doing the `with`, but also the bodies of all units that the named unit uses, following `with` links transitively. For example, if we put a pragma `Elaborate_All (B)` in unit `A`, then it requires not only that the body of `B` be elaborated before `A`, but also the body of `C`, because `B` `with`'s `C`.

We are now in a position to give a usage rule in Ada for avoiding elaboration problems, at least if dynamic dispatching and access to subprogram values are not used. We will handle these cases separately later.

The rule is simple. If a unit has elaboration code that can directly or indirectly make a call to a subprogram in a `with`'ed unit, or instantiate a generic package in a `with`'ed unit, then if the `with`'ed unit does not have pragma `Pure` or `Preelaborate`, then the client should have a pragma `Elaborate_All` for the `with`'ed unit. By following this rule a client is assured that calls can be made without risk of an exception.

For generic subprogram instantiations, the rule can be relaxed to require only a pragma `Elaborate` since elaborating the body of a subprogram cannot cause any transitive elaboration (we are not calling the subprogram in this case, just elaborating its declaration).

If this rule is not followed, then a program may be in one of four states:

No order exists
  No order of elaboration exists which follows the rules, taking into account any `Elaborate`, `Elaborate_All`, or `Elaborate_Body` pragmas. In this case, an Ada compiler must diagnose the situation at bind time, and refuse to build an executable program.
One or more orders exist, all incorrect
  One or more acceptable elaboration orders exist, and all of them generate an elaboration order problem. In this case, the binder can build an executable program, but `Program_Error` will be raised when the program is run.
Several orders exist, some right, some incorrect
  One or more acceptable elaboration orders exists, and some of them work, and some do not. The programmer has not controlled the order of elaboration, so the binder may or may not pick one of the correct orders, and the program may or may not raise an exception when it is run. This is the worst case, because it means that the program may fail when moved to another compiler, or even another version of the same compiler.
One or more orders exists, all correct
  One ore more acceptable elaboration orders exist, and all of them work. In this case the program runs successfully. This state of affairs can be guaranteed by following the rule we gave above, but may be true even if the rule is not followed.

Note that one additional advantage of following our rules on the use of `Elaborate` and `Elaborate_All` is that the program continues to stay in the ideal (all orders OK) state even if maintenance changes some bodies of some units. Conversely, if a program that does not follow this rule happens to be safe at some point, this state of affairs may deteriorate silently as a result of maintenance changes.

You may have noticed that the above discussion did not mention the use of `Elaborate_Body`. This was a deliberate omission. If you `with` an `Elaborate_Body` unit, it still may be the case that code in the body makes calls to some other unit, so it is still necessary to use `Elaborate_All` on such units.

Next: Controlling Elaboration in GNAT - External Calls, Previous: Controlling the Elaboration Order, Up: Elaboration Order Handling in GNAT

### C.4 Controlling Elaboration in GNAT - Internal Calls

In the case of internal calls, i.e., calls within a single package, the programmer has full control over the order of elaboration, and it is up to the programmer to elaborate declarations in an appropriate order. For example writing:

         function One return Float;

         Q : Float := One;

         function One return Float is
         begin
              return 1.0;
         end One;

will obviously raise `Program_Error` at run time, because function One will be called before its body is elaborated. In this case GNAT will generate a warning that the call will raise `Program_Error`:

          1. procedure y is
          2.    function One return Float;
          3.
          4.    Q : Float := One;
                             |
             >>> warning: cannot call "One" before body is elaborated
             >>> warning: Program_Error will be raised at run time

          5.
          6.    function One return Float is
          7.    begin
          8.         return 1.0;
          9.    end One;
         10.
         11. begin
         12.    null;
         13. end;

Note that in this particular case, it is likely that the call is safe, because the function `One` does not access any global variables. Nevertheless in Ada, we do not want the validity of the check to depend on the contents of the body (think about the separate compilation case), so this is still wrong, as we discussed in the previous sections.

The error is easily corrected by rearranging the declarations so that the body of `One` appears before the declaration containing the call (note that in Ada 95 and Ada 2005, declarations can appear in any order, so there is no restriction that would prevent this reordering, and if we write:

         function One return Float;

         function One return Float is
         begin
              return 1.0;
         end One;

         Q : Float := One;

then all is well, no warning is generated, and no `Program_Error` exception will be raised. Things are more complicated when a chain of subprograms is executed:

         function A return Integer;
         function B return Integer;
         function C return Integer;

         function B return Integer is begin return A; end;
         function C return Integer is begin return B; end;

         X : Integer := C;

         function A return Integer is begin return 1; end;

Now the call to `C` at elaboration time in the declaration of `X` is correct, because the body of `C` is already elaborated, and the call to `B` within the body of `C` is correct, but the call to `A` within the body of `B` is incorrect, because the body of `A` has not been elaborated, so `Program_Error` will be raised on the call to `A`. In this case GNAT will generate a warning that `Program_Error` may be raised at the point of the call. Let's look at the warning:

          1. procedure x is
          2.    function A return Integer;
          3.    function B return Integer;
          4.    function C return Integer;
          5.
          6.    function B return Integer is begin return A; end;
                                                             |
             >>> warning: call to "A" before body is elaborated may
                          raise Program_Error
             >>> warning: "B" called at line 7
             >>> warning: "C" called at line 9

          7.    function C return Integer is begin return B; end;
          8.
          9.    X : Integer := C;
         10.
         11.    function A return Integer is begin return 1; end;
         12.
         13. begin
         14.    null;
         15. end;

Note that the message here says “may raise”, instead of the direct case, where the message says “will be raised”. That's because whether `A` is actually called depends in general on run-time flow of control. For example, if the body of `B` said

         function B return Integer is
         begin
            if some-condition-depending-on-input-data then
               return A;
            else
               return 1;
            end if;
         end B;

then we could not know until run time whether the incorrect call to A would actually occur, so `Program_Error` might or might not be raised. It is possible for a compiler to do a better job of analyzing bodies, to determine whether or not `Program_Error` might be raised, but it certainly couldn't do a perfect job (that would require solving the halting problem and is provably impossible), and because this is a warning anyway, it does not seem worth the effort to do the analysis. Cases in which it would be relevant are rare.

In practice, warnings of either of the forms given above will usually correspond to real errors, and should be examined carefully and eliminated. In the rare case where a warning is bogus, it can be suppressed by any of the following methods:

- Compile with the `-gnatws` switch set
- Suppress `Elaboration_Check` for the called subprogram
- Use pragma `Warnings_Off` to turn warnings off for the call

For the internal elaboration check case, GNAT by default generates the necessary run-time checks to ensure that `Program_Error` is raised if any call fails an elaboration check. Of course this can only happen if a warning has been issued as described above. The use of pragma `Suppress (Elaboration_Check)` may (but is not guaranteed to) suppress some of these checks, meaning that it may be possible (but is not guaranteed) for a program to be able to call a subprogram whose body is not yet elaborated, without raising a `Program_Error` exception.

Next: Default Behavior in GNAT - Ensuring Safety, Previous: Controlling Elaboration in GNAT - Internal Calls, Up: Elaboration Order Handling in GNAT

### C.5 Controlling Elaboration in GNAT - External Calls

The previous section discussed the case in which the execution of a particular thread of elaboration code occurred entirely within a single unit. This is the easy case to handle, because a programmer has direct and total control over the order of elaboration, and furthermore, checks need only be generated in cases which are rare and which the compiler can easily detect. The situation is more complex when separate compilation is taken into account. Consider the following:

         package Math is
            function Sqrt (Arg : Float) return Float;
         end Math;

         package body Math is
            function Sqrt (Arg : Float) return Float is
            begin
                  ...
            end Sqrt;
         end Math;

         with Math;
         package Stuff is
            X : Float := Math.Sqrt (0.5);
         end Stuff;

         with Stuff;
         procedure Main is
         begin
            ...
         end Main;

where `Main` is the main program. When this program is executed, the elaboration code must first be executed, and one of the jobs of the binder is to determine the order in which the units of a program are to be elaborated. In this case we have four units: the spec and body of `Math`, the spec of `Stuff` and the body of `Main`). In what order should the four separate sections of elaboration code be executed?

There are some restrictions in the order of elaboration that the binder can choose. In particular, if unit U has a `with` for a package `X`, then you are assured that the spec of `X` is elaborated before U , but you are not assured that the body of `X` is elaborated before U. This means that in the above case, the binder is allowed to choose the order:

         spec of Math
         spec of Stuff
         body of Math
         body of Main

but that's not good, because now the call to `Math.Sqrt` that happens during the elaboration of the `Stuff` spec happens before the body of `Math.Sqrt` is elaborated, and hence causes `Program_Error` exception to be raised. At first glance, one might say that the binder is misbehaving, because obviously you want to elaborate the body of something you `with` first, but that is not a general rule that can be followed in all cases. Consider

         package X is ...

         package Y is ...

         with X;
         package body Y is ...

         with Y;
         package body X is ...

This is a common arrangement, and, apart from the order of elaboration problems that might arise in connection with elaboration code, this works fine. A rule that says that you must first elaborate the body of anything you `with` cannot work in this case: the body of `X` `with`'s `Y`, which means you would have to elaborate the body of `Y` first, but that `with`'s `X`, which means you have to elaborate the body of `X` first, but ... and we have a loop that cannot be broken.

It is true that the binder can in many cases guess an order of elaboration that is unlikely to cause a `Program_Error` exception to be raised, and it tries to do so (in the above example of `Math/Stuff/Spec`, the GNAT binder will by default elaborate the body of `Math` right after its spec, so all will be well).

However, a program that blindly relies on the binder to be helpful can get into trouble, as we discussed in the previous sections, so GNAT provides a number of facilities for assisting the programmer in developing programs that are robust with respect to elaboration order.

Next: Treatment of Pragma Elaborate, Previous: Controlling Elaboration in GNAT - External Calls, Up: Elaboration Order Handling in GNAT

### C.6 Default Behavior in GNAT - Ensuring Safety

The default behavior in GNAT ensures elaboration safety. In its default mode GNAT implements the rule we previously described as the right approach. Let's restate it:

- If a unit has elaboration code that can directly or indirectly make a call to a subprogram in a `with`'ed unit, or instantiate a generic package in a `with`'ed unit, then if the `with`'ed unit does not have pragma `Pure` or `Preelaborate`, then the client should have an `Elaborate_All` pragma for the `with`'ed unit.

  In the case of instantiating a generic subprogram, it is always sufficient to have only an `Elaborate` pragma for the `with`'ed unit.

By following this rule a client is assured that calls and instantiations can be made without risk of an exception.

In this mode GNAT traces all calls that are potentially made from elaboration code, and puts in any missing implicit `Elaborate` and `Elaborate_All` pragmas. The advantage of this approach is that no elaboration problems are possible if the binder can find an elaboration order that is consistent with these implicit `Elaborate` and `Elaborate_All` pragmas. The disadvantage of this approach is that no such order may exist.

If the binder does not generate any diagnostics, then it means that it has found an elaboration order that is guaranteed to be safe. However, the binder may still be relying on implicitly generated `Elaborate` and `Elaborate_All` pragmas so portability to other compilers than GNAT is not guaranteed.

If it is important to guarantee portability, then the compilations should use the `-gnatwl` (warn on elaboration problems) switch. This will cause warning messages to be generated indicating the missing `Elaborate` and `Elaborate_All` pragmas. Consider the following source program:

         with k;
         package j is
           m : integer := k.r;
         end;

where it is clear that there should be a pragma `Elaborate_All` for unit `k`. An implicit pragma will be generated, and it is likely that the binder will be able to honor it. However, if you want to port this program to some other Ada compiler than GNAT. it is safer to include the pragma explicitly in the source. If this unit is compiled with the `-gnatwl` switch, then the compiler outputs a warning:

         1. with k;
         2. package j is
         3.   m : integer := k.r;
                              |
            >>> warning: call to "r" may raise Program_Error
            >>> warning: missing pragma Elaborate_All for "k"

         4. end;

and these warnings can be used as a guide for supplying manually the missing pragmas. It is usually a bad idea to use this warning option during development. That's because it will warn you when you need to put in a pragma, but cannot warn you when it is time to take it out. So the use of pragma `Elaborate_All` may lead to unnecessary dependencies and even false circularities.

This default mode is more restrictive than the Ada Reference Manual, and it is possible to construct programs which will compile using the dynamic model described there, but will run into a circularity using the safer static model we have described.

Of course any Ada compiler must be able to operate in a mode consistent with the requirements of the Ada Reference Manual, and in particular must have the capability of implementing the standard dynamic model of elaboration with run-time checks.

In GNAT, this standard mode can be achieved either by the use of the `-gnatE` switch on the compiler (`gcc` or `gnatmake`) command, or by the use of the configuration pragma:

         pragma Elaboration_Checks (DYNAMIC);

Either approach will cause the unit affected to be compiled using the standard dynamic run-time elaboration checks described in the Ada Reference Manual. The static model is generally preferable, since it is clearly safer to rely on compile and link time checks rather than run-time checks. However, in the case of legacy code, it may be difficult to meet the requirements of the static model. This issue is further discussed in What to Do If the Default Elaboration Behavior Fails.

Note that the static model provides a strict subset of the allowed behavior and programs of the Ada Reference Manual, so if you do adhere to the static model and no circularities exist, then you are assured that your program will work using the dynamic model, providing that you remove any pragma Elaborate statements from the source.

Next: Elaboration Issues for Library Tasks, Previous: Default Behavior in GNAT - Ensuring Safety, Up: Elaboration Order Handling in GNAT

### C.7 Treatment of Pragma Elaborate

The use of `pragma Elaborate` should generally be avoided in Ada 95 and Ada 2005 programs, since there is no guarantee that transitive calls will be properly handled. Indeed at one point, this pragma was placed in Annex J (Obsolescent Features), on the grounds that it is never useful.

Now that's a bit restrictive. In practice, the case in which `pragma Elaborate` is useful is when the caller knows that there are no transitive calls, or that the called unit contains all necessary transitive `pragma Elaborate` statements, and legacy code often contains such uses.

Strictly speaking the static mode in GNAT should ignore such pragmas, since there is no assurance at compile time that the necessary safety conditions are met. In practice, this would cause GNAT to be incompatible with correctly written Ada 83 code that had all necessary `pragma Elaborate` statements in place. Consequently, we made the decision that GNAT in its default mode will believe that if it encounters a `pragma Elaborate` then the programmer knows what they are doing, and it will trust that no elaboration errors can occur.

The result of this decision is two-fold. First to be safe using the static mode, you should remove all `pragma Elaborate` statements. Second, when fixing circularities in existing code, you can selectively use `pragma Elaborate` statements to convince the static mode of GNAT that it need not generate an implicit `pragma Elaborate_All` statement.

When using the static mode with `-gnatwl`, any use of `pragma Elaborate` will generate a warning about possible problems.

Next: Mixing Elaboration Models, Previous: Treatment of Pragma Elaborate, Up: Elaboration Order Handling in GNAT

### C.8 Elaboration Issues for Library Tasks

In this section we examine special elaboration issues that arise for programs that declare library level tasks.

Generally the model of execution of an Ada program is that all units are elaborated, and then execution of the program starts. However, the declaration of library tasks definitely does not fit this model. The reason for this is that library tasks start as soon as they are declared (more precisely, as soon as the statement part of the enclosing package body is reached), that is to say before elaboration of the program is complete. This means that if such a task calls a subprogram, or an entry in another task, the callee may or may not be elaborated yet, and in the standard Reference Manual model of dynamic elaboration checks, you can even get timing dependent Program_Error exceptions, since there can be a race between the elaboration code and the task code.

The static model of elaboration in GNAT seeks to avoid all such dynamic behavior, by being conservative, and the conservative approach in this particular case is to assume that all the code in a task body is potentially executed at elaboration time if a task is declared at the library level.

This can definitely result in unexpected circularities. Consider the following example

         package Decls is
           task Lib_Task is
              entry Start;
           end Lib_Task;

           type My_Int is new Integer;

           function Ident (M : My_Int) return My_Int;
         end Decls;

         with Utils;
         package body Decls is
           task body Lib_Task is
           begin
              accept Start;
              Utils.Put_Val (2);
           end Lib_Task;

           function Ident (M : My_Int) return My_Int is
           begin
              return M;
           end Ident;
         end Decls;

         with Decls;
         package Utils is
           procedure Put_Val (Arg : Decls.My_Int);
         end Utils;

         with Text_IO;
         package body Utils is
           procedure Put_Val (Arg : Decls.My_Int) is
           begin
              Text_IO.Put_Line (Decls.My_Int'Image (Decls.Ident (Arg)));
           end Put_Val;
         end Utils;

         with Decls;
         procedure Main is
         begin
            Decls.Lib_Task.Start;
         end;

If the above example is compiled in the default static elaboration mode, then a circularity occurs. The circularity comes from the call `Utils.Put_Val` in the task body of `Decls.Lib_Task`. Since this call occurs in elaboration code, we need an implicit pragma `Elaborate_All` for `Utils`. This means that not only must the spec and body of `Utils` be elaborated before the body of `Decls`, but also the spec and body of any unit that is `with'ed` by the body of `Utils` must also be elaborated before the body of `Decls`. This is the transitive implication of pragma `Elaborate_All` and it makes sense, because in general the body of `Put_Val` might have a call to something in a `with'ed` unit.

In this case, the body of Utils (actually its spec) `with's` `Decls`. Unfortunately this means that the body of `Decls` must be elaborated before itself, in case there is a call from the body of `Utils`.

Here is the exact chain of events we are worrying about:

1. In the body of `Decls` a call is made from within the body of a library task to a subprogram in the package `Utils`. Since this call may occur at elaboration time (given that the task is activated at elaboration time), we have to assume the worst, i.e., that the call does happen at elaboration time.
2. This means that the body and spec of `Util` must be elaborated before the body of `Decls` so that this call does not cause an access before elaboration.
3. Within the body of `Util`, specifically within the body of `Util.Put_Val` there may be calls to any unit `with`'ed by this package.
4. One such `with`'ed package is package `Decls`, so there might be a call to a subprogram in `Decls` in `Put_Val`. In fact there is such a call in this example, but we would have to assume that there was such a call even if it were not there, since we are not supposed to write the body of `Decls` knowing what is in the body of `Utils`; certainly in the case of the static elaboration model, the compiler does not know what is in other bodies and must assume the worst.
5. This means that the spec and body of `Decls` must also be elaborated before we elaborate the unit containing the call, but that unit is `Decls`! This means that the body of `Decls` must be elaborated before itself, and that's a circularity.

Indeed, if you add an explicit pragma `Elaborate_All` for `Utils` in the body of `Decls` you will get a true Ada Reference Manual circularity that makes the program illegal.

In practice, we have found that problems with the static model of elaboration in existing code often arise from library tasks, so we must address this particular situation.

Note that if we compile and run the program above, using the dynamic model of elaboration (that is to say use the `-gnatE` switch), then it compiles, binds, links, and runs, printing the expected result of 2. Therefore in some sense the circularity here is only apparent, and we need to capture the properties of this program that distinguish it from other library-level tasks that have real elaboration problems.

We have four possible answers to this question:

- Use the dynamic model of elaboration.

  If we use the `-gnatE` switch, then as noted above, the program works. Why is this? If we examine the task body, it is apparent that the task cannot proceed past the `accept` statement until after elaboration has been completed, because the corresponding entry call comes from the main program, not earlier. This is why the dynamic model works here. But that's really giving up on a precise analysis, and we prefer to take this approach only if we cannot solve the problem in any other manner. So let us examine two ways to reorganize the program to avoid the potential elaboration problem.

- Split library tasks into separate packages.

  Write separate packages, so that library tasks are isolated from other declarations as much as possible. Let us look at a variation on the above program.

                package Decls1 is
                  task Lib_Task is
                     entry Start;
                  end Lib_Task;
                end Decls1;

                with Utils;
                package body Decls1 is
                  task body Lib_Task is
                  begin
                     accept Start;
                     Utils.Put_Val (2);
                  end Lib_Task;
                end Decls1;

                package Decls2 is
                  type My_Int is new Integer;
                  function Ident (M : My_Int) return My_Int;
                end Decls2;

                with Utils;
                package body Decls2 is
                  function Ident (M : My_Int) return My_Int is
                  begin
                     return M;
                  end Ident;
                end Decls2;

                with Decls2;
                package Utils is
                  procedure Put_Val (Arg : Decls2.My_Int);
                end Utils;

                with Text_IO;
                package body Utils is
                  procedure Put_Val (Arg : Decls2.My_Int) is
                  begin
                     Text_IO.Put_Line (Decls2.My_Int'Image (Decls2.Ident (Arg)));
                  end Put_Val;
                end Utils;

                with Decls1;
                procedure Main is
                begin
                   Decls1.Lib_Task.Start;
                end;

  All we have done is to split `Decls` into two packages, one containing the library task, and one containing everything else. Now there is no cycle, and the program compiles, binds, links and executes using the default static model of elaboration.

- Declare separate task types.

  A significant part of the problem arises because of the use of the single task declaration form. This means that the elaboration of the task type, and the elaboration of the task itself (i.e. the creation of the task) happen at the same time. A good rule of style in Ada is to always create explicit task types. By following the additional step of placing task objects in separate packages from the task type declaration, many elaboration problems are avoided. Here is another modified example of the example program:

                package Decls is
                  task type Lib_Task_Type is
                     entry Start;
                  end Lib_Task_Type;

                  type My_Int is new Integer;

                  function Ident (M : My_Int) return My_Int;
                end Decls;

                with Utils;
                package body Decls is
                  task body Lib_Task_Type is
                  begin
                     accept Start;
                     Utils.Put_Val (2);
                  end Lib_Task_Type;

                  function Ident (M : My_Int) return My_Int is
                  begin
                     return M;
                  end Ident;
                end Decls;

                with Decls;
                package Utils is
                  procedure Put_Val (Arg : Decls.My_Int);
                end Utils;

                with Text_IO;
                package body Utils is
                  procedure Put_Val (Arg : Decls.My_Int) is
                  begin
                     Text_IO.Put_Line (Decls.My_Int'Image (Decls.Ident (Arg)));
                  end Put_Val;
                end Utils;

                with Decls;
                package Declst is
                   Lib_Task : Decls.Lib_Task_Type;
                end Declst;

                with Declst;
                procedure Main is
                begin
                   Declst.Lib_Task.Start;
                end;

  What we have done here is to replace the `task` declaration in package `Decls` with a `task type` declaration. Then we introduce a separate package `Declst` to contain the actual task object. This separates the elaboration issues for the `task type` declaration, which causes no trouble, from the elaboration issues of the task object, which is also unproblematic, since it is now independent of the elaboration of `Utils`. This separation of concerns also corresponds to a generally sound engineering principle of separating declarations from instances. This version of the program also compiles, binds, links, and executes, generating the expected output.

- Use No_Entry_Calls_In_Elaboration_Code restriction. The previous two approaches described how a program can be restructured to avoid the special problems caused by library task bodies. in practice, however, such restructuring may be difficult to apply to existing legacy code, so we must consider solutions that do not require massive rewriting.

  Let us consider more carefully why our original sample program works under the dynamic model of elaboration. The reason is that the code in the task body blocks immediately on the `accept` statement. Now of course there is nothing to prohibit elaboration code from making entry calls (for example from another library level task), so we cannot tell in isolation that the task will not execute the accept statement during elaboration.

  However, in practice it is very unusual to see elaboration code make any entry calls, and the pattern of tasks starting at elaboration time and then immediately blocking on `accept` or `select` statements is very common. What this means is that the compiler is being too pessimistic when it analyzes the whole package body as though it might be executed at elaboration time.

  If we know that the elaboration code contains no entry calls, (a very safe assumption most of the time, that could almost be made the default behavior), then we can compile all units of the program under control of the following configuration pragma:

                pragma Restrictions (No_Entry_Calls_In_Elaboration_Code);

  This pragma can be placed in the `gnat.adc` file in the usual manner. If we take our original unmodified program and compile it in the presence of a `gnat.adc` containing the above pragma, then once again, we can compile, bind, link, and execute, obtaining the expected result. In the presence of this pragma, the compiler does not trace calls in a task body, that appear after the first `accept` or `select` statement, and therefore does not report a potential circularity in the original program.

  The compiler will check to the extent it can that the above restriction is not violated, but it is not always possible to do a complete check at compile time, so it is important to use this pragma only if the stated restriction is in fact met, that is to say no task receives an entry call before elaboration of all units is completed.

Next: What to Do If the Default Elaboration Behavior Fails, Previous: Elaboration Issues for Library Tasks, Up: Elaboration Order Handling in GNAT

### C.9 Mixing Elaboration Models

So far, we have assumed that the entire program is either compiled using the dynamic model or static model, ensuring consistency. It is possible to mix the two models, but rules have to be followed if this mixing is done to ensure that elaboration checks are not omitted.

The basic rule is that a unit compiled with the static model cannot be `with'ed` by a unit compiled with the dynamic model. The reason for this is that in the static model, a unit assumes that its clients guarantee to use (the equivalent of) pragma `Elaborate_All` so that no elaboration checks are required in inner subprograms, and this assumption is violated if the client is compiled with dynamic checks.

The precise rule is as follows. A unit that is compiled with dynamic checks can only `with` a unit that meets at least one of the following criteria:

- The `with'ed` unit is itself compiled with dynamic elaboration checks (that is with the `-gnatE` switch.
- The `with'ed` unit is an internal GNAT implementation unit from the System, Interfaces, Ada, or GNAT hierarchies.
- The `with'ed` unit has pragma Preelaborate or pragma Pure.
- The `with'ing` unit (that is the client) has an explicit pragma `Elaborate_All` for the `with'ed` unit.

If this rule is violated, that is if a unit with dynamic elaboration checks `with's` a unit that does not meet one of the above four criteria, then the binder (`gnatbind`) will issue a warning similar to that in the following example:

         warning: "x.ads" has dynamic elaboration checks and with's
         warning:   "y.ads" which has static elaboration checks

These warnings indicate that the rule has been violated, and that as a result elaboration checks may be missed in the resulting executable file. This warning may be suppressed using the `-ws` binder switch in the usual manner.

One useful application of this mixing rule is in the case of a subsystem which does not itself `with` units from the remainder of the application. In this case, the entire subsystem can be compiled with dynamic checks to resolve a circularity in the subsystem, while allowing the main application that uses this subsystem to be compiled using the more reliable default static model.

Next: Elaboration for Dispatching Calls, Previous: Mixing Elaboration Models, Up: Elaboration Order Handling in GNAT

### C.10 What to Do If the Default Elaboration Behavior Fails

If the binder cannot find an acceptable order, it outputs detailed diagnostics. For example:

         error: elaboration circularity detected
         info:   "proc (body)" must be elaborated before "pack (body)"
         info:     reason: Elaborate_All probably needed in unit "pack (body)"
         info:     recompile "pack (body)" with -gnatwl
         info:                             for full details
         info:       "proc (body)"
         info:         is needed by its spec:
         info:       "proc (spec)"
         info:         which is withed by:
         info:       "pack (body)"
         info:  "pack (body)" must be elaborated before "proc (body)"
         info:     reason: pragma Elaborate in unit "proc (body)"

In this case we have a cycle that the binder cannot break. On the one hand, there is an explicit pragma Elaborate in `proc` for `pack`. This means that the body of `pack` must be elaborated before the body of `proc`. On the other hand, there is elaboration code in `pack` that calls a subprogram in `proc`. This means that for maximum safety, there should really be a pragma Elaborate_All in `pack` for `proc` which would require that the body of `proc` be elaborated before the body of `pack`. Clearly both requirements cannot be satisfied. Faced with a circularity of this kind, you have three different options.

Fix the program
  The most desirable option from the point of view of long-term maintenance is to rearrange the program so that the elaboration problems are avoided. One useful technique is to place the elaboration code into separate child packages. Another is to move some of the initialization code to explicitly called subprograms, where the program controls the order of initialization explicitly. Although this is the most desirable option, it may be impractical and involve too much modification, especially in the case of complex legacy code.
Perform dynamic checks
  If the compilations are done using the `-gnatE` (dynamic elaboration check) switch, then GNAT behaves in a quite different manner. Dynamic checks are generated for all calls that could possibly result in raising an exception. With this switch, the compiler does not generate implicit `Elaborate` or `Elaborate_All` pragmas. The behavior then is exactly as specified in the Ada Reference Manual. The binder will generate an executable program that may or may not raise `Program_Error`, and then it is the programmer's job to ensure that it does not raise an exception. Note that it is important to compile all units with the switch, it cannot be used selectively.
Suppress checks
  The drawback of dynamic checks is that they generate a significant overhead at run time, both in space and time. If you are absolutely sure that your program cannot raise any elaboration exceptions, and you still want to use the dynamic elaboration model, then you can use the configuration pragma `Suppress (Elaboration_Check)` to suppress all such checks. For example this pragma could be placed in the `gnat.adc` file.
Suppress checks selectively
  When you know that certain calls or instantiations in elaboration code cannot possibly lead to an elaboration error, and the binder nevertheless complains about implicit `Elaborate` and `Elaborate_All` pragmas that lead to elaboration circularities, it is possible to remove those warnings locally and obtain a program that will bind. Clearly this can be unsafe, and it is the responsibility of the programmer to make sure that the resulting program has no elaboration anomalies. The pragma `Suppress (Elaboration_Check)` can be used with different granularity to suppress warnings and break elaboration circularities:
  - Place the pragma that names the called subprogram in the declarative part that contains the call.
  - Place the pragma in the declarative part, without naming an entity. This disables warnings on all calls in the corresponding declarative region.
  - Place the pragma in the package spec that declares the called subprogram, and name the subprogram. This disables warnings on all elaboration calls to that subprogram.
  - Place the pragma in the package spec that declares the called subprogram, without naming any entity. This disables warnings on all elaboration calls to all subprograms declared in this spec.
  - Use Pragma Elaborate As previously described in section See Treatment of Pragma Elaborate, GNAT in static mode assumes that a `pragma` Elaborate indicates correctly that no elaboration checks are required on calls to the designated unit. There may be cases in which the caller knows that no transitive calls can occur, so that a `pragma Elaborate` will be sufficient in a case where `pragma Elaborate_All` would cause a circularity.

  These five cases are listed in order of decreasing safety, and therefore require increasing programmer care in their application. Consider the following program:

                package Pack1 is
                  function F1 return Integer;
                  X1 : Integer;
                end Pack1;

                package Pack2 is
                  function F2 return Integer;
                  function Pure (x : integer) return integer;
                  --  pragma Suppress (Elaboration_Check, On => Pure);  -- (3)
                  --  pragma Suppress (Elaboration_Check);              -- (4)
                end Pack2;

                with Pack2;
                package body Pack1 is
                  function F1 return Integer is
                  begin
                    return 100;
                  end F1;
                  Val : integer := Pack2.Pure (11);    --  Elab. call (1)
                begin
                  declare
                    --  pragma Suppress(Elaboration_Check, Pack2.F2);   -- (1)
                    --  pragma Suppress(Elaboration_Check);             -- (2)
                  begin
                    X1 := Pack2.F2 + 1;                --  Elab. call (2)
                  end;
                end Pack1;

                with Pack1;
                package body Pack2 is
                  function F2 return Integer is
                  begin
                     return Pack1.F1;
                  end F2;
                  function Pure (x : integer) return integer is
                  begin
                     return x ** 3 - 3 * x;
                  end;
                end Pack2;

                with Pack1, Ada.Text_IO;
                procedure Proc3 is
                begin
                  Ada.Text_IO.Put_Line(Pack1.X1'Img); -- 101
                end Proc3;

  In the absence of any pragmas, an attempt to bind this program produces the following diagnostics:

                error: elaboration circularity detected
                info:    "pack1 (body)" must be elaborated before "pack1 (body)"
                info:       reason: Elaborate_All probably needed in unit "pack1 (body)"
                info:       recompile "pack1 (body)" with -gnatwl for full details
                info:          "pack1 (body)"
                info:             must be elaborated along with its spec:
                info:          "pack1 (spec)"
                info:             which is withed by:
                info:          "pack2 (body)"
                info:             which must be elaborated along with its spec:
                info:          "pack2 (spec)"
                info:             which is withed by:
                info:          "pack1 (body)"

  The sources of the circularity are the two calls to `Pack2.Pure` and `Pack2.F2` in the body of `Pack1`. We can see that the call to F2 is safe, even though F2 calls F1, because the call appears after the elaboration of the body of F1. Therefore the pragma (1) is safe, and will remove the warning on the call. It is also possible to use pragma (2) because there are no other potentially unsafe calls in the block.

  The call to `Pure` is safe because this function does not depend on the state of `Pack2`. Therefore any call to this function is safe, and it is correct to place pragma (3) in the corresponding package spec.

  Finally, we could place pragma (4) in the spec of `Pack2` to disable warnings on all calls to functions declared therein. Note that this is not necessarily safe, and requires more detailed examination of the subprogram bodies involved. In particular, a call to `F2` requires that `F1` be already elaborated.

It is hard to generalize on which of these four approaches should be taken. Obviously if it is possible to fix the program so that the default treatment works, this is preferable, but this may not always be practical. It is certainly simple enough to use `-gnatE` but the danger in this case is that, even if the GNAT binder finds a correct elaboration order, it may not always do so, and certainly a binder from another Ada compiler might not. A combination of testing and analysis (for which the warnings generated with the `-gnatwl` switch can be useful) must be used to ensure that the program is free of errors. One switch that is useful in this testing is the `-p (pessimistic elaboration order)` switch for `gnatbind`. Normally the binder tries to find an order that has the best chance of avoiding elaboration problems. However, if this switch is used, the binder plays a devil's advocate role, and tries to choose the order that has the best chance of failing. If your program works even with this switch, then it has a better chance of being error free, but this is still not a guarantee.

For an example of this approach in action, consider the C-tests (executable tests) from the ACVC suite. If these are compiled and run with the default treatment, then all but one of them succeed without generating any error diagnostics from the binder. However, there is one test that fails, and this is not surprising, because the whole point of this test is to ensure that the compiler can handle cases where it is impossible to determine a correct order statically, and it checks that an exception is indeed raised at run time.

This one test must be compiled and run using the `-gnatE` switch, and then it passes. Alternatively, the entire suite can be run using this switch. It is never wrong to run with the dynamic elaboration switch if your code is correct, and we assume that the C-tests are indeed correct (it is less efficient, but efficiency is not a factor in running the ACVC tests.)

Next: Summary of Procedures for Elaboration Control, Previous: What to Do If the Default Elaboration Behavior Fails, Up: Elaboration Order Handling in GNAT

### C.11 Elaboration for Dispatching Calls

In rare cases, the static elaboration model fails to prevent dispatching calls to not-yet-elaborated subprograms. In such cases, we fall back to run-time checks; premature calls to any primitive operation of a tagged type before the body of the operation has been elaborated will raise `Program_Error`.

Access-to-subprogram types, however, are handled conservatively, and do not require run-time checks. This was not true in earlier versions of the compiler; you can use the `-gnatd.U` debug switch to revert to the old behavior if the new conservative behavior causes elaboration cycles.

Next: Other Elaboration Order Considerations, Previous: Elaboration for Dispatching Calls, Up: Elaboration Order Handling in GNAT

### C.12 Summary of Procedures for Elaboration Control

First, compile your program with the default options, using none of the special elaboration control switches. If the binder successfully binds your program, then you can be confident that, apart from issues raised by the use of access-to-subprogram types and dynamic dispatching, the program is free of elaboration errors. If it is important that the program be portable, then use the `-gnatwl` switch to generate warnings about missing `Elaborate` or `Elaborate_All` pragmas, and supply the missing pragmas.

If the program fails to bind using the default static elaboration handling, then you can fix the program to eliminate the binder message, or recompile the entire program with the `-gnatE` switch to generate dynamic elaboration checks, and, if you are sure there really are no elaboration problems, use a global pragma `Suppress (Elaboration_Check)`.

Previous: Summary of Procedures for Elaboration Control, Up: Elaboration Order Handling in GNAT

### C.13 Other Elaboration Order Considerations

This section has been entirely concerned with the issue of finding a valid elaboration order, as defined by the Ada Reference Manual. In a case where several elaboration orders are valid, the task is to find one of the possible valid elaboration orders (and the static model in GNAT will ensure that this is achieved).

The purpose of the elaboration rules in the Ada Reference Manual is to make sure that no entity is accessed before it has been elaborated. For a subprogram, this means that the spec and body must have been elaborated before the subprogram is called. For an object, this means that the object must have been elaborated before its value is read or written. A violation of either of these two requirements is an access before elaboration order, and this section has been all about avoiding such errors.

In the case where more than one order of elaboration is possible, in the sense that access before elaboration errors are avoided, then any one of the orders is “correct” in the sense that it meets the requirements of the Ada Reference Manual, and no such error occurs.

However, it may be the case for a given program, that there are constraints on the order of elaboration that come not from consideration of avoiding elaboration errors, but rather from extra-lingual logic requirements. Consider this example:

         with Init_Constants;
         package Constants is
            X : Integer := 0;
            Y : Integer := 0;
         end Constants;

         package Init_Constants is
            procedure P; -- require a body
         end Init_Constants;

         with Constants;
         package body Init_Constants is
            procedure P is begin null; end;
         begin
            Constants.X := 3;
            Constants.Y := 4;
         end Init_Constants;

         with Constants;
         package Calc is
            Z : Integer := Constants.X + Constants.Y;
         end Calc;

         with Calc;
         with Text_IO; use Text_IO;
         procedure Main is
         begin
            Put_Line (Calc.Z'Img);
         end Main;

In this example, there is more than one valid order of elaboration. For example both the following are correct orders:

         Init_Constants spec
         Constants spec
         Calc spec
         Init_Constants body
         Main body

           and

         Init_Constants spec
         Init_Constants body
         Constants spec
         Calc spec
         Main body

There is no language rule to prefer one or the other, both are correct from an order of elaboration point of view. But the programmatic effects of the two orders are very different. In the first, the elaboration routine of `Calc` initializes `Z` to zero, and then the main program runs with this value of zero. But in the second order, the elaboration routine of `Calc` runs after the body of Init_Constants has set `X` and `Y` and thus `Z` is set to 7 before `Main` runs.

One could perhaps by applying pretty clever non-artificial intelligence to the situation guess that it is more likely that the second order of elaboration is the one desired, but there is no formal linguistic reason to prefer one over the other. In fact in this particular case, GNAT will prefer the second order, because of the rule that bodies are elaborated as soon as possible, but it's just luck that this is what was wanted (if indeed the second order was preferred).

If the program cares about the order of elaboration routines in a case like this, it is important to specify the order required. In this particular case, that could have been achieved by adding to the spec of Calc:

         pragma Elaborate_All (Constants);

which requires that the body (if any) and spec of `Constants`, as well as the body and spec of any unit `with`'ed by `Constants` be elaborated before `Calc` is elaborated.

Clearly no automatic method can always guess which alternative you require, and if you are working with legacy code that had constraints of this kind which were not properly specified by adding `Elaborate` or `Elaborate_All` pragmas, then indeed it is possible that two different compilers can choose different orders.

However, GNAT does attempt to diagnose the common situation where there are uninitialized variables in the visible part of a package spec, and the corresponding package body has an elaboration block that directly or indirectly initialized one or more of these variables. This is the situation in which a pragma Elaborate_Body is usually desirable, and GNAT will generate a warning that suggests this addition if it detects this situation.

The `gnatbind` `-p` switch may be useful in smoking out problems. This switch causes bodies to be elaborated as late as possible instead of as early as possible. In the example above, it would have forced the choice of the first elaboration order. If you get different results when using this switch, and particularly if one set of results is right, and one is wrong as far as you are concerned, it shows that you have some missing `Elaborate` pragmas. For the example above, we have the following output:

         gnatmake -f -q main
         main
          7
         gnatmake -f -q main -bargs -p
         main
          0

It is of course quite unlikely that both these results are correct, so it is up to you in a case like this to investigate the source of the difference, by looking at the two elaboration orders that are chosen, and figuring out which is correct, and then adding the necessary `Elaborate` or `Elaborate_All` pragmas to ensure the desired order.

Next: Conditional Compilation, Previous: Elaboration Order Handling in GNAT, Up: Top

## Appendix D Overflow Check Handling in GNAT

Next: Overflow Checking Modes in GNAT, Up: Overflow Check Handling in GNAT

### D.1 Background

Overflow checks are checks that the compiler may make to ensure that intermediate results are not out of range. For example:

            A : Integer;
            ...
            A := A + 1;

if `A` has the value `Integer'Last`, then the addition may cause overflow since the result is out of range of the type `Integer`. In this case `Constraint_Error` will be raised if checks are enabled.

A trickier situation arises in examples like the following:

           A, C : Integer;
           ...
           A := (A + 1) + C;

where `A` is `Integer'Last` and `C` is `-1`. Now the final result of the expression on the right hand side is `Integer'Last` which is in range, but the question arises whether the intermediate addition of `(A + 1)` raises an overflow error.

The (perhaps surprising) answer is that the Ada language definition does not answer this question. Instead it leaves it up to the implementation to do one of two things if overflow checks are enabled.

- raise an exception (`Constraint_Error`), or
- yield the correct mathematical result which is then used in subsequent operations.

If the compiler chooses the first approach, then the assignment of this example will indeed raise `Constraint_Error` if overflow checking is enabled, or result in erroneous execution if overflow checks are suppressed.

But if the compiler chooses the second approach, then it can perform both additions yielding the correct mathematical result, which is in range, so no exception will be raised, and the right result is obtained, regardless of whether overflow checks are suppressed.

Note that in the first example an exception will be raised in either case, since if the compiler gives the correct mathematical result for the addition, it will be out of range of the target type of the assignment, and thus fails the range check.

This lack of specified behavior in the handling of overflow for intermediate results is a source of non-portability, and can thus be problematic when programs are ported. Most typically this arises in a situation where the original compiler did not raise an exception, and then the application is moved to a compiler where the check is performed on the intermediate result and an unexpected exception is raised.

Furthermore, when using Ada 2012's preconditions and other assertion forms, another issue arises. Consider:

              procedure P (A, B : Integer) with
                Pre => A + B <= Integer'Last;

One often wants to regard arithmetic in a context like this from a mathematical point of view. So for example, if the two actual parameters for a call to `P` are both `Integer'Last`, then the precondition should be regarded as False. If we are executing in a mode with run-time checks enabled for preconditions, then we would like this precondition to fail, rather than raising an exception because of the intermediate overflow.

However, the language definition leaves the specification of whether the above condition fails (raising `Assert_Error`) or causes an intermediate overflow (raising `Constraint_Error`) up to the implementation.

The situation is worse in a case such as the following:

              procedure Q (A, B, C : Integer) with
                Pre => A + B + C <= Integer'Last;

Consider the call

              Q (A => Integer'Last, B => 1, C => -1);

From a mathematical point of view the precondition is True, but at run time we may (but are not guaranteed to) get an exception raised because of the intermediate overflow (and we really would prefer this precondition to be considered True at run time).

Next: Specifying the Desired Mode, Previous: Background, Up: Overflow Check Handling in GNAT

### D.2 Overflow Checking Modes in GNAT

To deal with the portability issue, and with the problem of mathematical versus run-time intepretation of the expressions in assertions, GNAT provides comprehensive control over the handling of intermediate overflow. GNAT can operate in three modes, and furthemore, permits separate selection of operating modes for the expressions within assertions (here the term “assertions” is used in the technical sense, which includes preconditions and so forth) and for expressions appearing outside assertions.

The three modes are:

- Use base type for intermediate operations (`STRICT`)

  In this mode, all intermediate results for predefined arithmetic operators are computed using the base type, and the result must be in range of the base type. If this is not the case then either an exception is raised (if overflow checks are enabled) or the execution is erroneous (if overflow checks are suppressed). This is the normal default mode.

- Most intermediate overflows avoided (`MINIMIZED`)

  In this mode, the compiler attempts to avoid intermediate overflows by using a larger integer type, typically `Long_Long_Integer`, as the type in which arithmetic is performed for predefined arithmetic operators. This may be slightly more expensive at run time (compared to suppressing intermediate overflow checks), though the cost is negligible on modern 64-bit machines. For the examples given earlier, no intermediate overflows would have resulted in exceptions, since the intermediate results are all in the range of `Long_Long_Integer` (typically 64-bits on nearly all implementations of GNAT). In addition, if checks are enabled, this reduces the number of checks that must be made, so this choice may actually result in an improvement in space and time behavior.

  However, there are cases where `Long_Long_Integer` is not large enough, consider the following example:

                       procedure R (A, B, C, D : Integer) with
                         Pre => (A**2 * B**2) / (C**2 * D**2) <= 10;

  where `A` = `B` = `C` = `D` = `Integer'Last`. Now the intermediate results are out of the range of `Long_Long_Integer` even though the final result is in range and the precondition is True (from a mathematical point of view). In such a case, operating in this mode, an overflow occurs for the intermediate computation (which is why this mode says most intermediate overflows are avoided). In this case, an exception is raised if overflow checks are enabled, and the execution is erroneous if overflow checks are suppressed.

- All intermediate overflows avoided (`ELIMINATED`)

  In this mode, the compiler avoids all intermediate overflows by using arbitrary precision arithmetic as required. In this mode, the above example with `A**2 * B**2` would not cause intermediate overflow, because the intermediate result would be evaluated using sufficient precision, and the result of evaluating the precondition would be True.

  This mode has the advantage of avoiding any intermediate overflows, but at the expense of significant run-time overhead, including the use of a library (included automatically in this mode) for multiple-precision arithmetic.

  This mode provides cleaner semantics for assertions, since now the run-time behavior emulates true arithmetic behavior for the predefined arithmetic operators, meaning that there is never a conflict between the mathematical view of the assertion, and its run-time behavior.

  Note that in this mode, the behavior is unaffected by whether or not overflow checks are suppressed, since overflow does not occur. It is possible for gigantic intermediate expressions to raise `Storage_Error` as a result of attempting to compute the results of such expressions (e.g. `Integer'Last ** Integer'Last`) but overflow is impossible.

Note that these modes apply only to the evaluation of predefined arithmetic, membership, and comparison operators for signed integer aritmetic.

For fixed-point arithmetic, checks can be suppressed. But if checks are enabled then fixed-point values are always checked for overflow against the base type for intermediate expressions (that is such checks always operate in the equivalent of `STRICT` mode).

For floating-point, on nearly all architectures, `Machine_Overflows` is False, and IEEE infinities are generated, so overflow exceptions are never raised. If you want to avoid infinities, and check that final results of expressions are in range, then you can declare a constrained floating-point type, and range checks will be carried out in the normal manner (with infinite values always failing all range checks).

Next: Default Settings, Previous: Overflow Checking Modes in GNAT, Up: Overflow Check Handling in GNAT

### D.3 Specifying the Desired Mode

The desired mode of for handling intermediate overflow can be specified using either the `Overflow_Mode` pragma or an equivalent compiler switch. The pragma has the form

             pragma Overflow_Mode ([General =>] MODE [, [Assertions =>] MODE]);

where `MODE` is one of

- `STRICT`: intermediate overflows checked (using base type)
- `MINIMIZED`: minimize intermediate overflows
- `ELIMINATED`: eliminate intermediate overflows

The case is ignored, so `MINIMIZED`, `Minimized` and `minimized` all have the same effect.

If only the `General` parameter is present, then the given `MODE` applies to expressions both within and outside assertions. If both arguments are present, then `General` applies to expressions outside assertions, and `Assertions` applies to expressions within assertions. For example:

            pragma Overflow_Mode
              (General => Minimized, Assertions => Eliminated);

specifies that general expressions outside assertions be evaluated in “minimize intermediate overflows” mode, and expressions within assertions be evaluated in “eliminate intermediate overflows” mode. This is often a reasonable choice, avoiding excessive overhead outside assertions, but assuring a high degree of portability when importing code from another compiler, while incurring the extra overhead for assertion expressions to ensure that the behavior at run time matches the expected mathematical behavior.

The `Overflow_Mode` pragma has the same scoping and placement rules as pragma `Suppress`, so it can occur either as a configuration pragma, specifying a default for the whole program, or in a declarative scope, where it applies to the remaining declarations and statements in that scope.

Note that pragma `Overflow_Mode` does not affect whether overflow checks are enabled or suppressed. It only controls the method used to compute intermediate values. To control whether overflow checking is enabled or suppressed, use pragma `Suppress` or `Unsuppress` in the usual manner

Additionally, a compiler switch `-gnato?` or `-gnato??` can be used to control the checking mode default (which can be subsequently overridden using pragmas). Here ``?`' is one of the digits ``1`' through ``3`':

- `1`: use base type for intermediate operations (`STRICT`)
- `2`: minimize intermediate overflows (`MINIMIZED`)
- `3`: eliminate intermediate overflows (`ELIMINATED`)

As with the pragma, if only one digit appears then it applies to all cases; if two digits are given, then the first applies outside assertions, and the second within assertions. Thus the equivalent of the example pragma above would be `-gnato23`.

If no digits follow the `-gnato`, then it is equivalent to `-gnato11`, causing all intermediate operations to be computed using the base type (`STRICT` mode).

In addition to setting the mode used for computation of intermediate results, the `-gnato` switch also enables overflow checking (which is suppressed by default). It thus combines the effect of using a pragma `Overflow_Mode` and pragma `Unsuppress`.

Next: Implementation Notes, Previous: Specifying the Desired Mode, Up: Overflow Check Handling in GNAT

### D.4 Default Settings

The default mode for overflow checks is

            General => Strict

which causes all computations both inside and outside assertions to use the base type. In addition overflow checks are suppressed.

This retains compatibility with previous versions of GNAT which suppressed overflow checks by default and always used the base type for computation of intermediate results.

The switch `-gnato` (with no digits following) is equivalent to

            General => Strict

which causes overflow checking of all intermediate overflows both inside and outside assertions against the base type. This provides compatibility with this switch as implemented in previous versions of GNAT.

The pragma `Suppress (Overflow_Check)` disables overflow checking, but it has no effect on the method used for computing intermediate results.

The pragma `Unsuppress (Overflow_Check)` enables overflow checking, but it has no effect on the method used for computing intermediate results.

Previous: Default Settings, Up: Overflow Check Handling in GNAT

### D.5 Implementation Notes

In practice on typical 64-bit machines, the `MINIMIZED` mode is reasonably efficient, and can be generally used. It also helps to ensure compatibility with code imported from some other compiler to GNAT.

Setting all intermediate overflows checking (`CHECKED` mode) makes sense if you want to make sure that your code is compatible with any other possible Ada implementation. This may be useful in ensuring portability for code that is to be exported to some other compiler than GNAT.

The Ada standard allows the reassociation of expressions at the same precedence level if no parentheses are present. For example, `A+B+C` parses as though it were `(A+B)+C`, but the compiler can reintepret this as `A+(B+C)`, possibly introducing or eliminating an overflow exception. The GNAT compiler never takes advantage of this freedom, and the expression `A+B+C` will be evaluated as `(A+B)+C`. If you need the other order, you can write the parentheses explicitly `A+(B+C)` and GNAT will respect this order.

The use of `ELIMINATED` mode will cause the compiler to automatically include an appropriate arbitrary precision integer arithmetic package. The compiler will make calls to this package, though only in cases where it cannot be sure that `Long_Long_Integer` is sufficient to guard against intermediate overflows. This package does not use dynamic alllocation, but it does use the secondary stack, so an appropriate secondary stack package must be present (this is always true for standard full Ada, but may require specific steps for restricted run times such as ZFP).

Although `ELIMINATED` mode causes expressions to use arbitrary precision arithmetic, avoiding overflow, the final result must be in an appropriate range. This is true even if the final result is of type `[Long_[Long_]]Integer'Base`, which still has the same bounds as its associated constrained type at run-time.

Currently, the `ELIMINATED` mode is only available on target platforms for which `Long_Long_Integer` is 64-bits (nearly all GNAT platforms).

Next: Inline Assembler, Previous: Overflow Check Handling in GNAT, Up: Top

## Appendix E Conditional Compilation

It is often necessary to arrange for a single source program to serve multiple purposes, where it is compiled in different ways to achieve these different goals. Some examples of the need for this feature are

- Adapting a program to a different hardware environment
- Adapting a program to a different target architecture
- Turning debugging features on and off
- Arranging for a program to compile with different compilers

In C, or C++, the typical approach would be to use the preprocessor that is defined as part of the language. The Ada language does not contain such a feature. This is not an oversight, but rather a very deliberate design decision, based on the experience that overuse of the preprocessing features in C and C++ can result in programs that are extremely difficult to maintain. For example, if we have ten switches that can be on or off, this means that there are a thousand separate programs, any one of which might not even be syntactically correct, and even if syntactically correct, the resulting program might not work correctly. Testing all combinations can quickly become impossible.

Nevertheless, the need to tailor programs certainly exists, and in this Appendix we will discuss how this can be achieved using Ada in general, and GNAT in particular.

Next: Debugging - A Special Case, Up: Conditional Compilation

### E.1 Use of Boolean Constants

In the case where the difference is simply which code sequence is executed, the cleanest solution is to use Boolean constants to control which code is executed.

         FP_Initialize_Required : constant Boolean := True;
         ...
         if FP_Initialize_Required then
         ...
         end if;

Not only will the code inside the `if` statement not be executed if the constant Boolean is `False`, but it will also be completely deleted from the program. However, the code is only deleted after the `if` statement has been checked for syntactic and semantic correctness. (In contrast, with preprocessors the code is deleted before the compiler ever gets to see it, so it is not checked until the switch is turned on.) Typically the Boolean constants will be in a separate package, something like:

         package Config is
            FP_Initialize_Required : constant Boolean := True;
            Reset_Available        : constant Boolean := False;
            ...
         end Config;

The `Config` package exists in multiple forms for the various targets, with an appropriate script selecting the version of `Config` needed. Then any other unit requiring conditional compilation can do a `with` of `Config` to make the constants visible.

Next: Conditionalizing Declarations, Previous: Use of Boolean Constants, Up: Conditional Compilation

### E.2 Debugging - A Special Case

A common use of conditional code is to execute statements (for example dynamic checks, or output of intermediate results) under control of a debug switch, so that the debugging behavior can be turned on and off. This can be done using a Boolean constant to control whether the code is active:

         if Debugging then
            Put_Line ("got to the first stage!");
         end if;

or

         if Debugging and then Temperature > 999.0 then
            raise Temperature_Crazy;
         end if;

Since this is a common case, there are special features to deal with this in a convenient manner. For the case of tests, Ada 2005 has added a pragma `Assert` that can be used for such tests. This pragma is modeled on the `Assert` pragma that has always been available in GNAT, so this feature may be used with GNAT even if you are not using Ada 2005 features. The use of pragma `Assert` is described in Pragma Assert, but as an example, the last test could be written:

         pragma Assert (Temperature <= 999.0, "Temperature Crazy");

or simply

         pragma Assert (Temperature <= 999.0);

In both cases, if assertions are active and the temperature is excessive, the exception `Assert_Failure` will be raised, with the given string in the first case or a string indicating the location of the pragma in the second case used as the exception message.

You can turn assertions on and off by using the `Assertion_Policy` pragma. This is an Ada 2005 pragma which is implemented in all modes by GNAT, but only in the latest versions of GNAT which include Ada 2005 capability. Alternatively, you can use the `-gnata` switch to enable assertions from the command line (this is recognized by all versions of GNAT).

For the example above with the `Put_Line`, the GNAT-specific pragma `Debug` can be used:

         pragma Debug (Put_Line ("got to the first stage!"));

If debug pragmas are enabled, the argument, which must be of the form of a procedure call, is executed (in this case, `Put_Line` will be called). Only one call can be present, but of course a special debugging procedure containing any code you like can be included in the program and then called in a pragma `Debug` argument as needed.

One advantage of pragma `Debug` over the `if Debugging then` construct is that pragma `Debug` can appear in declarative contexts, such as at the very beginning of a procedure, before local declarations have been elaborated.

Debug pragmas are enabled using either the `-gnata` switch that also controls assertions, or with a separate Debug_Policy pragma. The latter pragma is new in the Ada 2005 versions of GNAT (but it can be used in Ada 95 and Ada 83 programs as well), and is analogous to pragma `Assertion_Policy` to control assertions.

`Assertion_Policy` and `Debug_Policy` are configuration pragmas, and thus they can appear in `gnat.adc` if you are not using a project file, or in the file designated to contain configuration pragmas in a project file. They then apply to all subsequent compilations. In practice the use of the `-gnata` switch is often the most convenient method of controlling the status of these pragmas.

Note that a pragma is not a statement, so in contexts where a statement sequence is required, you can't just write a pragma on its own. You have to add a `null` statement.

         if ... then
            ... -- some statements
         else
            pragma Assert (Num_Cases < 10);
            null;
         end if;

Next: Use of Alternative Implementations, Previous: Debugging - A Special Case, Up: Conditional Compilation

### E.3 Conditionalizing Declarations

In some cases, it may be necessary to conditionalize declarations to meet different requirements. For example we might want a bit string whose length is set to meet some hardware message requirement.

In some cases, it may be possible to do this using declare blocks controlled by conditional constants:

         if Small_Machine then
            declare
               X : Bit_String (1 .. 10);
            begin
               ...
            end;
         else
            declare
               X : Large_Bit_String (1 .. 1000);
            begin
               ...
            end;
         end if;

Note that in this approach, both declarations are analyzed by the compiler so this can only be used where both declarations are legal, even though one of them will not be used.

Another approach is to define integer constants, e.g. `Bits_Per_Word`, or Boolean constants, e.g. `Little_Endian`, and then write declarations that are parameterized by these constants. For example

         for Rec use
           Field1 at 0 range Boolean'Pos (Little_Endian) * 10 .. Bits_Per_Word;
         end record;

If `Bits_Per_Word` is set to 32, this generates either

         for Rec use
           Field1 at 0 range 0 .. 32;
         end record;

for the big endian case, or

         for Rec use record
           Field1 at 0 range 10 .. 32;
         end record;

for the little endian case. Since a powerful subset of Ada expression notation is usable for creating static constants, clever use of this feature can often solve quite difficult problems in conditionalizing compilation (note incidentally that in Ada 95, the little endian constant was introduced as `System.Default_Bit_Order`, so you do not need to define this one yourself).

Next: Preprocessing, Previous: Conditionalizing Declarations, Up: Conditional Compilation

### E.4 Use of Alternative Implementations

In some cases, none of the approaches described above are adequate. This can occur for example if the set of declarations required is radically different for two different configurations.

In this situation, the official Ada way of dealing with conditionalizing such code is to write separate units for the different cases. As long as this does not result in excessive duplication of code, this can be done without creating maintenance problems. The approach is to share common code as far as possible, and then isolate the code and declarations that are different. Subunits are often a convenient method for breaking out a piece of a unit that is to be conditionalized, with separate files for different versions of the subunit for different targets, where the build script selects the right one to give to the compiler. As an example, consider a situation where a new feature in Ada 2005 allows something to be done in a really nice way. But your code must be able to compile with an Ada 95 compiler. Conceptually you want to say:

         if Ada_2005 then
            ... neat Ada 2005 code
         else
            ... not quite as neat Ada 95 code
         end if;

where `Ada_2005` is a Boolean constant.

But this won't work when `Ada_2005` is set to `False`, since the `then` clause will be illegal for an Ada 95 compiler. (Recall that although such unreachable code would eventually be deleted by the compiler, it still needs to be legal. If it uses features introduced in Ada 2005, it will be illegal in Ada 95.)

So instead we write

         procedure Insert is separate;

Then we have two files for the subunit `Insert`, with the two sets of code. If the package containing this is called `File_Queries`, then we might have two files

- `file_queries-insert-2005.adb`
- `file_queries-insert-95.adb`

and the build script renames the appropriate file to

         file_queries-insert.adb

and then carries out the compilation.

This can also be done with project files' naming schemes. For example:

         For Body ("File_Queries.Insert") use "file_queries-insert-2005.ada";

Note also that with project files it is desirable to use a different extension than `ads` / `adb` for alternative versions. Otherwise a naming conflict may arise through another commonly used feature: to declare as part of the project a set of directories containing all the sources obeying the default naming scheme.

The use of alternative units is certainly feasible in all situations, and for example the Ada part of the GNAT run-time is conditionalized based on the target architecture using this approach. As a specific example, consider the implementation of the AST feature in VMS. There is one spec:

         s-asthan.ads

which is the same for all architectures, and three bodies:

`s-asthan.adb`
  used for all non-VMS operating systems
`s-asthan-vms-alpha.adb`
  used for VMS on the Alpha
`s-asthan-vms-ia64.adb`
  used for VMS on the ia64

The dummy version `s-asthan.adb` simply raises exceptions noting that this operating system feature is not available, and the two remaining versions interface with the corresponding versions of VMS to provide VMS-compatible AST handling. The GNAT build script knows the architecture and operating system, and automatically selects the right version, renaming it if necessary to `s-asthan.adb` before the run-time build.

Another style for arranging alternative implementations is through Ada's access-to-subprogram facility. In case some functionality is to be conditionally included, you can declare an access-to-procedure variable `Ref` that is initialized to designate a “do nothing” procedure, and then invoke `Ref.all` when appropriate. In some library package, set `Ref` to `Proc'Access` for some procedure `Proc` that performs the relevant processing. The initialization only occurs if the library package is included in the program. The same idea can also be implemented using tagged types and dispatching calls.

Previous: Use of Alternative Implementations, Up: Conditional Compilation

### E.5 Preprocessing

Although it is quite possible to conditionalize code without the use of C-style preprocessing, as described earlier in this section, it is nevertheless convenient in some cases to use the C approach. Moreover, older Ada compilers have often provided some preprocessing capability, so legacy code may depend on this approach, even though it is not standard.

To accommodate such use, GNAT provides a preprocessor (modeled to a large extent on the various preprocessors that have been used with legacy code on other compilers, to enable easier transition).

The preprocessor may be used in two separate modes. It can be used quite separately from the compiler, to generate a separate output source file that is then fed to the compiler as a separate step. This is the `gnatprep` utility, whose use is fully described in Preprocessing Using gnatprep. The preprocessing language allows such constructs as

         #if DEBUG or PRIORITY > 4 then
            bunch of declarations
         #else
            completely different bunch of declarations
         #end if;

The values of the symbols `DEBUG` and `PRIORITY` can be defined either on the command line or in a separate file.

The other way of running the preprocessor is even closer to the C style and often more convenient. In this approach the preprocessing is integrated into the compilation process. The compiler is fed the preprocessor input which includes `#if` lines etc, and then the compiler carries out the preprocessing internally and processes the resulting output. For more details on this approach, see Integrated Preprocessing.

Next: Compatibility and Porting Guide, Previous: Conditional Compilation, Up: Top

## Appendix F Inline Assembler

If you need to write low-level software that interacts directly with the hardware, Ada provides two ways to incorporate assembly language code into your program. First, you can import and invoke external routines written in assembly language, an Ada feature fully supported by GNAT. However, for small sections of code it may be simpler or more efficient to include assembly language statements directly in your Ada source program, using the facilities of the implementation-defined package `System.Machine_Code`, which incorporates the gcc Inline Assembler. The Inline Assembler approach offers a number of advantages, including the following:

- No need to use non-Ada tools
- Consistent interface over different targets
- Automatic usage of the proper calling conventions
- Access to Ada constants and variables
- Definition of intrinsic routines
- Possibility of inlining a subprogram comprising assembler code
- Code optimizer can take Inline Assembler code into account

This chapter presents a series of examples to show you how to use the Inline Assembler. Although it focuses on the Intel x86, the general approach applies also to other processors. It is assumed that you are familiar with Ada and with assembly language programming.

Next: A Simple Example of Inline Assembler, Up: Inline Assembler

### F.1 Basic Assembler Syntax

The assembler used by GNAT and gcc is based not on the Intel assembly language, but rather on a language that descends from the AT&T Unix assembler as (and which is often referred to as “AT&T syntax”). The following table summarizes the main features of as syntax and points out the differences from the Intel conventions. See the gcc as and gas (an as macro pre-processor) documentation for further information.

Register names
  gcc / as: Prefix with “%”; for example `%eax`
  Intel: No extra punctuation; for example `eax`
Immediate operand
  gcc / as: Prefix with “$”; for example `$4`
  Intel: No extra punctuation; for example `4`
Address
  gcc / as: Prefix with “$”; for example `$loc`
  Intel: No extra punctuation; for example `loc`
Memory contents
  gcc / as: No extra punctuation; for example `loc`
  Intel: Square brackets; for example `[loc]`
Register contents
  gcc / as: Parentheses; for example `(%eax)`
  Intel: Square brackets; for example `[eax]`
Hexadecimal numbers
  gcc / as: Leading “0x” (C language syntax); for example `0xA0`
  Intel: Trailing “h”; for example `A0h`
Operand size
  gcc / as: Explicit in op code; for example `movw` to move a 16-bit word
  Intel: Implicit, deduced by assembler; for example `mov`
Instruction repetition
  gcc / as: Split into two lines; for example
  `rep`
  `stosl`
  Intel: Keep on one line; for example `rep stosl`
Order of operands
  gcc / as: Source first; for example `movw $4, %eax`
  Intel: Destination first; for example `mov eax, 4`

Next: Output Variables in Inline Assembler, Previous: Basic Assembler Syntax, Up: Inline Assembler

### F.2 A Simple Example of Inline Assembler

The following example will generate a single assembly language statement, `nop`, which does nothing. Despite its lack of run-time effect, the example will be useful in illustrating the basics of the Inline Assembler facility.

         with System.Machine_Code; use System.Machine_Code;
         procedure Nothing is
         begin
            Asm ("nop");
         end Nothing;

`Asm` is a procedure declared in package `System.Machine_Code`; here it takes one parameter, a template string that must be a static expression and that will form the generated instruction. `Asm` may be regarded as a compile-time procedure that parses the template string and additional parameters (none here), from which it generates a sequence of assembly language instructions.

The examples in this chapter will illustrate several of the forms for invoking `Asm`; a complete specification of the syntax is found in Machine Code Insertions.

Under the standard GNAT conventions, the `Nothing` procedure should be in a file named `nothing.adb`. You can build the executable in the usual way:

         gnatmake nothing

However, the interesting aspect of this example is not its run-time behavior but rather the generated assembly code. To see this output, invoke the compiler as follows:

            gcc -c -S -fomit-frame-pointer -gnatp nothing.adb

where the options are:

`-c`
  compile only (no bind or link)
`-S`
  generate assembler listing
`-fomit-frame-pointer`
  do not set up separate stack frames
`-gnatp`
  do not add runtime checks

This gives a human-readable assembler version of the code. The resulting file will have the same name as the Ada source file, but with a `.s` extension. In our example, the file `nothing.s` has the following contents:

         .file "nothing.adb"
         gcc2_compiled.:
         ___gnu_compiled_ada:
         .text
            .align 4
         .globl __ada_nothing
         __ada_nothing:
         #APP
            nop
         #NO_APP
            jmp L1
            .align 2,0x90
         L1:
            ret

The assembly code you included is clearly indicated by the compiler, between the `#APP` and `#NO_APP` delimiters. The character before the 'APP' and 'NOAPP' can differ on different targets. For example, GNU/Linux uses '#APP' while on NT you will see '/APP'.

If you make a mistake in your assembler code (such as using the wrong size modifier, or using a wrong operand for the instruction) GNAT will report this error in a temporary file, which will be deleted when the compilation is finished. Generating an assembler file will help in such cases, since you can assemble this file separately using the as assembler that comes with gcc.

Assembling the file using the command

         as nothing.s

will give you error messages whose lines correspond to the assembler input file, so you can easily find and correct any mistakes you made. If there are no errors, as will generate an object file `nothing.out`.

Next: Input Variables in Inline Assembler, Previous: A Simple Example of Inline Assembler, Up: Inline Assembler

### F.3 Output Variables in Inline Assembler

The examples in this section, showing how to access the processor flags, illustrate how to specify the destination operands for assembly language statements.

         with Interfaces; use Interfaces;
         with Ada.Text_IO; use Ada.Text_IO;
         with System.Machine_Code; use System.Machine_Code;
         procedure Get_Flags is
            Flags : Unsigned_32;
            use ASCII;
         begin
            Asm ("pushfl"          & LF & HT & -- push flags on stack
                 "popl %%eax"      & LF & HT & -- load eax with flags
                 "movl %%eax, %0",             -- store flags in variable
                 Outputs => Unsigned_32'Asm_Output ("=g", Flags));
            Put_Line ("Flags register:" & Flags'Img);
         end Get_Flags;

In order to have a nicely aligned assembly listing, we have separated multiple assembler statements in the Asm template string with linefeed (ASCII.LF) and horizontal tab (ASCII.HT) characters. The resulting section of the assembly output file is:

         #APP
            pushfl
            popl %eax
            movl %eax, -40(%ebp)
         #NO_APP

It would have been legal to write the Asm invocation as:

         Asm ("pushfl popl %%eax movl %%eax, %0")

but in the generated assembler file, this would come out as:

         #APP
            pushfl popl %eax movl %eax, -40(%ebp)
         #NO_APP

which is not so convenient for the human reader.

We use Ada comments at the end of each line to explain what the assembler instructions actually do. This is a useful convention.

When writing Inline Assembler instructions, you need to precede each register and variable name with a percent sign. Since the assembler already requires a percent sign at the beginning of a register name, you need two consecutive percent signs for such names in the Asm template string, thus `%%eax`. In the generated assembly code, one of the percent signs will be stripped off.

Names such as `%0`, `%1`, `%2`, etc., denote input or output variables: operands you later define using `Input` or `Output` parameters to `Asm`. An output variable is illustrated in the third statement in the Asm template string:

         movl %%eax, %0

The intent is to store the contents of the eax register in a variable that can be accessed in Ada. Simply writing `movl %%eax, Flags` would not necessarily work, since the compiler might optimize by using a register to hold Flags, and the expansion of the `movl` instruction would not be aware of this optimization. The solution is not to store the result directly but rather to advise the compiler to choose the correct operand form; that is the purpose of the `%0` output variable.

Information about the output variable is supplied in the `Outputs` parameter to `Asm`:

         Outputs => Unsigned_32'Asm_Output ("=g", Flags));

The output is defined by the `Asm_Output` attribute of the target type; the general format is

         Type'Asm_Output (constraint_string, variable_name)

The constraint string directs the compiler how to store/access the associated variable. In the example

         Unsigned_32'Asm_Output ("=m", Flags);

the `"m"` (memory) constraint tells the compiler that the variable `Flags` should be stored in a memory variable, thus preventing the optimizer from keeping it in a register. In contrast,

         Unsigned_32'Asm_Output ("=r", Flags);

uses the `"r"` (register) constraint, telling the compiler to store the variable in a register.

If the constraint is preceded by the equal character (=), it tells the compiler that the variable will be used to store data into it.

In the `Get_Flags` example, we used the `"g"` (global) constraint, allowing the optimizer to choose whatever it deems best.

There are a fairly large number of constraints, but the ones that are most useful (for the Intel x86 processor) are the following:

`=`
  output constraint
`g`
  global (i.e. can be stored anywhere)
`m`
  in memory
`I`
  a constant
`a`
  use eax
`b`
  use ebx
`c`
  use ecx
`d`
  use edx
`S`
  use esi
`D`
  use edi
`r`
  use one of eax, ebx, ecx or edx
`q`
  use one of eax, ebx, ecx, edx, esi or edi

The full set of constraints is described in the gcc and as documentation; note that it is possible to combine certain constraints in one constraint string.

You specify the association of an output variable with an assembler operand through the `%`n notation, where n is a non-negative integer. Thus in

         Asm ("pushfl"          & LF & HT & -- push flags on stack
              "popl %%eax"      & LF & HT & -- load eax with flags
              "movl %%eax, %0",             -- store flags in variable
              Outputs => Unsigned_32'Asm_Output ("=g", Flags));

`%0` will be replaced in the expanded code by the appropriate operand, whatever the compiler decided for the `Flags` variable.

In general, you may have any number of output variables:

- Count the operands starting at 0; thus `%0`, `%1`, etc.
- Specify the `Outputs` parameter as a parenthesized comma-separated list of `Asm_Output` attributes

For example:

         Asm ("movl %%eax, %0" & LF & HT &
              "movl %%ebx, %1" & LF & HT &
              "movl %%ecx, %2",
              Outputs => (Unsigned_32'Asm_Output ("=g", Var_A),   --  %0 = Var_A
                          Unsigned_32'Asm_Output ("=g", Var_B),   --  %1 = Var_B
                          Unsigned_32'Asm_Output ("=g", Var_C))); --  %2 = Var_C

where `Var_A`, `Var_B`, and `Var_C` are variables in the Ada program.

As a variation on the `Get_Flags` example, we can use the constraints string to direct the compiler to store the eax register into the `Flags` variable, instead of including the store instruction explicitly in the `Asm` template string:

         with Interfaces; use Interfaces;
         with Ada.Text_IO; use Ada.Text_IO;
         with System.Machine_Code; use System.Machine_Code;
         procedure Get_Flags_2 is
            Flags : Unsigned_32;
            use ASCII;
         begin
            Asm ("pushfl"      & LF & HT & -- push flags on stack
                 "popl %%eax",             -- save flags in eax
                 Outputs => Unsigned_32'Asm_Output ("=a", Flags));
            Put_Line ("Flags register:" & Flags'Img);
         end Get_Flags_2;

The `"a"` constraint tells the compiler that the `Flags` variable will come from the eax register. Here is the resulting code:

         #APP
            pushfl
            popl %eax
         #NO_APP
            movl %eax,-40(%ebp)

The compiler generated the store of eax into Flags after expanding the assembler code.

Actually, there was no need to pop the flags into the eax register; more simply, we could just pop the flags directly into the program variable:

         with Interfaces; use Interfaces;
         with Ada.Text_IO; use Ada.Text_IO;
         with System.Machine_Code; use System.Machine_Code;
         procedure Get_Flags_3 is
            Flags : Unsigned_32;
            use ASCII;
         begin
            Asm ("pushfl"  & LF & HT & -- push flags on stack
                 "pop %0",             -- save flags in Flags
                 Outputs => Unsigned_32'Asm_Output ("=g", Flags));
            Put_Line ("Flags register:" & Flags'Img);
         end Get_Flags_3;

Next: Inlining Inline Assembler Code, Previous: Output Variables in Inline Assembler, Up: Inline Assembler

### F.4 Input Variables in Inline Assembler

The example in this section illustrates how to specify the source operands for assembly language statements. The program simply increments its input value by 1:

         with Interfaces; use Interfaces;
         with Ada.Text_IO; use Ada.Text_IO;
         with System.Machine_Code; use System.Machine_Code;
         procedure Increment is

            function Incr (Value : Unsigned_32) return Unsigned_32 is
               Result : Unsigned_32;
            begin
               Asm ("incl %0",
                    Outputs => Unsigned_32'Asm_Output ("=a", Result),
                    Inputs  => Unsigned_32'Asm_Input ("a", Value));
               return Result;
            end Incr;

            Value : Unsigned_32;

         begin
            Value := 5;
            Put_Line ("Value before is" & Value'Img);
            Value := Incr (Value);
            Put_Line ("Value after is" & Value'Img);
         end Increment;

The `Outputs` parameter to `Asm` specifies that the result will be in the eax register and that it is to be stored in the `Result` variable.

The `Inputs` parameter looks much like the `Outputs` parameter, but with an `Asm_Input` attribute. The `"="` constraint, indicating an output value, is not present.

You can have multiple input variables, in the same way that you can have more than one output variable.

The parameter count (%0, %1) etc, still starts at the first output statement, and continues with the input statements.

Just as the `Outputs` parameter causes the register to be stored into the target variable after execution of the assembler statements, so does the `Inputs` parameter cause its variable to be loaded into the register before execution of the assembler statements.

Thus the effect of the `Asm` invocation is:

1. load the 32-bit value of `Value` into eax
2. execute the `incl %eax` instruction
3. store the contents of eax into the `Result` variable

The resulting assembler file (with `-O2` optimization) contains:

         _increment__incr.1:
            subl $4,%esp
            movl 8(%esp),%eax
         #APP
            incl %eax
         #NO_APP
            movl %eax,%edx
            movl %ecx,(%esp)
            addl $4,%esp
            ret

Next: Other Asm Functionality, Previous: Input Variables in Inline Assembler, Up: Inline Assembler

### F.5 Inlining Inline Assembler Code

For a short subprogram such as the `Incr` function in the previous section, the overhead of the call and return (creating / deleting the stack frame) can be significant, compared to the amount of code in the subprogram body. A solution is to apply Ada's `Inline` pragma to the subprogram, which directs the compiler to expand invocations of the subprogram at the point(s) of call, instead of setting up a stack frame for out-of-line calls. Here is the resulting program:

         with Interfaces; use Interfaces;
         with Ada.Text_IO; use Ada.Text_IO;
         with System.Machine_Code; use System.Machine_Code;
         procedure Increment_2 is

            function Incr (Value : Unsigned_32) return Unsigned_32 is
               Result : Unsigned_32;
            begin
               Asm ("incl %0",
                    Outputs => Unsigned_32'Asm_Output ("=a", Result),
                    Inputs  => Unsigned_32'Asm_Input ("a", Value));
               return Result;
            end Incr;
            pragma Inline (Increment);

            Value : Unsigned_32;

         begin
            Value := 5;
            Put_Line ("Value before is" & Value'Img);
            Value := Increment (Value);
            Put_Line ("Value after is" & Value'Img);
         end Increment_2;

Compile the program with both optimization (`-O2`) and inlining (`-gnatn`) enabled.

The `Incr` function is still compiled as usual, but at the point in `Increment` where our function used to be called:

         pushl %edi
         call _increment__incr.1

the code for the function body directly appears:

         movl %esi,%eax
         #APP
            incl %eax
         #NO_APP
            movl %eax,%edx

thus saving the overhead of stack frame setup and an out-of-line call.

Previous: Inlining Inline Assembler Code, Up: Inline Assembler

### F.6 Other `Asm` Functionality

This section describes two important parameters to the `Asm` procedure: `Clobber`, which identifies register usage; and `Volatile`, which inhibits unwanted optimizations.

Next: The Volatile Parameter, Up: Other Asm Functionality

#### F.6.1 The `Clobber` Parameter

One of the dangers of intermixing assembly language and a compiled language such as Ada is that the compiler needs to be aware of which registers are being used by the assembly code. In some cases, such as the earlier examples, the constraint string is sufficient to indicate register usage (e.g., `"a"` for the eax register). But more generally, the compiler needs an explicit identification of the registers that are used by the Inline Assembly statements.

Using a register that the compiler doesn't know about could be a side effect of an instruction (like `mull` storing its result in both eax and edx). It can also arise from explicit register usage in your assembly code; for example:

         Asm ("movl %0, %%ebx" & LF & HT &
              "movl %%ebx, %1",
              Outputs => Unsigned_32'Asm_Output ("=g", Var_Out),
              Inputs  => Unsigned_32'Asm_Input  ("g", Var_In));

where the compiler (since it does not analyze the `Asm` template string) does not know you are using the ebx register.

In such cases you need to supply the `Clobber` parameter to `Asm`, to identify the registers that will be used by your assembly code:

         Asm ("movl %0, %%ebx" & LF & HT &
              "movl %%ebx, %1",
              Outputs => Unsigned_32'Asm_Output ("=g", Var_Out),
              Inputs  => Unsigned_32'Asm_Input  ("g", Var_In),
              Clobber => "ebx");

The Clobber parameter is a static string expression specifying the register(s) you are using. Note that register names are not prefixed by a percent sign. Also, if more than one register is used then their names are separated by commas; e.g., `"eax, ebx"`

The `Clobber` parameter has several additional uses:

1. Use “register” name `cc` to indicate that flags might have changed
2. Use “register” name `memory` if you changed a memory location

Previous: The Clobber Parameter, Up: Other Asm Functionality

#### F.6.2 The `Volatile` Parameter

Compiler optimizations in the presence of Inline Assembler may sometimes have unwanted effects. For example, when an `Asm` invocation with an input variable is inside a loop, the compiler might move the loading of the input variable outside the loop, regarding it as a one-time initialization.

If this effect is not desired, you can disable such optimizations by setting the `Volatile` parameter to `True`; for example:

         Asm ("movl %0, %%ebx" & LF & HT &
              "movl %%ebx, %1",
              Outputs  => Unsigned_32'Asm_Output ("=g", Var_Out),
              Inputs   => Unsigned_32'Asm_Input  ("g", Var_In),
              Clobber  => "ebx",
              Volatile => True);

By default, `Volatile` is set to `False` unless there is no `Outputs` parameter.

Although setting `Volatile` to `True` prevents unwanted optimizations, it will also disable other optimizations that might be important for efficiency. In general, you should set `Volatile` to `True` only if the compiler's optimizations have created problems.

Next: Microsoft Windows Topics, Previous: Inline Assembler, Up: Top

## Appendix G Compatibility and Porting Guide

This chapter describes the compatibility issues that may arise between GNAT and other Ada compilation systems (including those for Ada 83), and shows how GNAT can expedite porting applications developed in other Ada environments.

Next: Compatibility between Ada 95 and Ada 2005, Up: Compatibility and Porting Guide

### G.1 Compatibility with Ada 83

Ada 95 and Ada 2005 are highly upwards compatible with Ada 83. In particular, the design intention was that the difficulties associated with moving from Ada 83 to Ada 95 or Ada 2005 should be no greater than those that occur when moving from one Ada 83 system to another.

However, there are a number of points at which there are minor incompatibilities. The Ada 95 Annotated Reference Manual contains full details of these issues, and should be consulted for a complete treatment. In practice the following subsections treat the most likely issues to be encountered.

Next: More deterministic semantics, Up: Compatibility with Ada 83

#### G.1.1 Legal Ada 83 programs that are illegal in Ada 95

Some legal Ada 83 programs are illegal (i.e., they will fail to compile) in Ada 95 and thus also in Ada 2005:

Character literals
  Some uses of character literals are ambiguous. Since Ada 95 has introduced `Wide_Character` as a new predefined character type, some uses of character literals that were legal in Ada 83 are illegal in Ada 95. For example:

                   for Char in 'A' .. 'Z' loop ... end loop;

  The problem is that `'A'` and `'Z'` could be from either `Character` or `Wide_Character`. The simplest correction is to make the type explicit; e.g.:

                   for Char in Character range 'A' .. 'Z' loop ... end loop;

New reserved words
  The identifiers `abstract`, `aliased`, `protected`, `requeue`, `tagged`, and `until` are reserved in Ada 95. Existing Ada 83 code using any of these identifiers must be edited to use some alternative name.
Freezing rules
  The rules in Ada 95 are slightly different with regard to the point at which entities are frozen, and representation pragmas and clauses are not permitted past the freeze point. This shows up most typically in the form of an error message complaining that a representation item appears too late, and the appropriate corrective action is to move the item nearer to the declaration of the entity to which it refers.

  A particular case is that representation pragmas cannot be applied to a subprogram body. If necessary, a separate subprogram declaration must be introduced to which the pragma can be applied.

Optional bodies for library packages
  In Ada 83, a package that did not require a package body was nevertheless allowed to have one. This lead to certain surprises in compiling large systems (situations in which the body could be unexpectedly ignored by the binder). In Ada 95, if a package does not require a body then it is not permitted to have a body. To fix this problem, simply remove a redundant body if it is empty, or, if it is non-empty, introduce a dummy declaration into the spec that makes the body required. One approach is to add a private part to the package declaration (if necessary), and define a parameterless procedure called `Requires_Body`, which must then be given a dummy procedure body in the package body, which then becomes required. Another approach (assuming that this does not introduce elaboration circularities) is to add an `Elaborate_Body` pragma to the package spec, since one effect of this pragma is to require the presence of a package body.
`Numeric_Error` is now the same as `Constraint_Error`
  In Ada 95, the exception `Numeric_Error` is a renaming of `Constraint_Error`. This means that it is illegal to have separate exception handlers for the two exceptions. The fix is simply to remove the handler for the `Numeric_Error` case (since even in Ada 83, a compiler was free to raise `Constraint_Error` in place of `Numeric_Error` in all cases).
Indefinite subtypes in generics
  In Ada 83, it was permissible to pass an indefinite type (e.g. `String`) as the actual for a generic formal private type, but then the instantiation would be illegal if there were any instances of declarations of variables of this type in the generic body. In Ada 95, to avoid this clear violation of the methodological principle known as the “contract model”, the generic declaration explicitly indicates whether or not such instantiations are permitted. If a generic formal parameter has explicit unknown discriminants, indicated by using `(<>)` after the subtype name, then it can be instantiated with indefinite types, but no stand-alone variables can be declared of this type. Any attempt to declare such a variable will result in an illegality at the time the generic is declared. If the `(<>)` notation is not used, then it is illegal to instantiate the generic with an indefinite type. This is the potential incompatibility issue when porting Ada 83 code to Ada 95. It will show up as a compile time error, and the fix is usually simply to add the `(<>)` to the generic declaration.

Next: Changed semantics, Previous: Legal Ada 83 programs that are illegal in Ada 95, Up: Compatibility with Ada 83

#### G.1.2 More deterministic semantics

Conversions
  Conversions from real types to integer types round away from 0. In Ada 83 the conversion Integer(2.5) could deliver either 2 or 3 as its value. This implementation freedom was intended to support unbiased rounding in statistical applications, but in practice it interfered with portability. In Ada 95 the conversion semantics are unambiguous, and rounding away from 0 is required. Numeric code may be affected by this change in semantics. Note, though, that this issue is no worse than already existed in Ada 83 when porting code from one vendor to another.
Tasking
  The Real-Time Annex introduces a set of policies that define the behavior of features that were implementation dependent in Ada 83, such as the order in which open select branches are executed.

Next: Other language compatibility issues, Previous: More deterministic semantics, Up: Compatibility with Ada 83

#### G.1.3 Changed semantics

The worst kind of incompatibility is one where a program that is legal in Ada 83 is also legal in Ada 95 but can have an effect in Ada 95 that was not possible in Ada 83. Fortunately this is extremely rare, but the one situation that you should be alert to is the change in the predefined type `Character` from 7-bit ASCII to 8-bit Latin-1.

Range of type `Character`
  The range of `Standard.Character` is now the full 256 characters of Latin-1, whereas in most Ada 83 implementations it was restricted to 128 characters. Although some of the effects of this change will be manifest in compile-time rejection of legal Ada 83 programs it is possible for a working Ada 83 program to have a different effect in Ada 95, one that was not permitted in Ada 83. As an example, the expression `Character'Pos(Character'Last)` returned `127` in Ada 83 and now delivers `255` as its value. In general, you should look at the logic of any character-processing Ada 83 program and see whether it needs to be adapted to work correctly with Latin-1. Note that the predefined Ada 95 API has a character handling package that may be relevant if code needs to be adapted to account for the additional Latin-1 elements. The desirable fix is to modify the program to accommodate the full character set, but in some cases it may be convenient to define a subtype or derived type of Character that covers only the restricted range.

Previous: Changed semantics, Up: Compatibility with Ada 83

#### G.1.4 Other language compatibility issues

`-gnat83` switch
  All implementations of GNAT provide a switch that causes GNAT to operate in Ada 83 mode. In this mode, some but not all compatibility problems of the type described above are handled automatically. For example, the new reserved words introduced in Ada 95 and Ada 2005 are treated simply as identifiers as in Ada 83. However, in practice, it is usually advisable to make the necessary modifications to the program to remove the need for using this switch. See Compiling Different Versions of Ada.
Support for removed Ada 83 pragmas and attributes
  A number of pragmas and attributes from Ada 83 were removed from Ada 95, generally because they were replaced by other mechanisms. Ada 95 and Ada 2005 compilers are allowed, but not required, to implement these missing elements. In contrast with some other compilers, GNAT implements all such pragmas and attributes, eliminating this compatibility concern. These include `pragma Interface` and the floating point type attributes (`Emax`, `Mantissa`, etc.), among other items.

Next: Implementation-dependent characteristics, Previous: Compatibility with Ada 83, Up: Compatibility and Porting Guide

### G.2 Compatibility between Ada 95 and Ada 2005

Although Ada 2005 was designed to be upwards compatible with Ada 95, there are a number of incompatibilities. Several are enumerated below; for a complete description please see the Annotated Ada 2005 Reference Manual, or section 9.1.1 in Rationale for Ada 2005.

New reserved words.
  The words `interface`, `overriding` and `synchronized` are reserved in Ada 2005. A pre-Ada 2005 program that uses any of these as an identifier will be illegal.
New declarations in predefined packages.
  A number of packages in the predefined environment contain new declarations: `Ada.Exceptions`, `Ada.Real_Time`, `Ada.Strings`, `Ada.Strings.Fixed`, `Ada.Strings.Bounded`, `Ada.Strings.Unbounded`, `Ada.Strings.Wide_Fixed`, `Ada.Strings.Wide_Bounded`, `Ada.Strings.Wide_Unbounded`, `Ada.Tags`, `Ada.Text_IO`, and `Interfaces.C`. If an Ada 95 program does a `with` and `use` of any of these packages, the new declarations may cause name clashes.
Access parameters.
  A nondispatching subprogram with an access parameter cannot be renamed as a dispatching operation. This was permitted in Ada 95.
Access types, discriminants, and constraints.
  Rule changes in this area have led to some incompatibilities; for example, constrained subtypes of some access types are not permitted in Ada 2005.
Aggregates for limited types.
  The allowance of aggregates for limited types in Ada 2005 raises the possibility of ambiguities in legal Ada 95 programs, since additional types now need to be considered in expression resolution.
Fixed-point multiplication and division.
  Certain expressions involving “*” or “/” for a fixed-point type, which were legal in Ada 95 and invoked the predefined versions of these operations, are now ambiguous. The ambiguity may be resolved either by applying a type conversion to the expression, or by explicitly invoking the operation from package `Standard`.
Return-by-reference types.
  The Ada 95 return-by-reference mechanism has been removed. Instead, the user can declare a function returning a value from an anonymous access type.

Next: Compatibility with Other Ada Systems, Previous: Compatibility between Ada 95 and Ada 2005, Up: Compatibility and Porting Guide

### G.3 Implementation-dependent characteristics

Although the Ada language defines the semantics of each construct as precisely as practical, in some situations (for example for reasons of efficiency, or where the effect is heavily dependent on the host or target platform) the implementation is allowed some freedom. In porting Ada 83 code to GNAT, you need to be aware of whether / how the existing code exercised such implementation dependencies. Such characteristics fall into several categories, and GNAT offers specific support in assisting the transition from certain Ada 83 compilers.

Next: Implementation-defined attributes, Up: Implementation-dependent characteristics

#### G.3.1 Implementation-defined pragmas

Ada compilers are allowed to supplement the language-defined pragmas, and these are a potential source of non-portability. All GNAT-defined pragmas are described in Implementation Defined Pragmas, and these include several that are specifically intended to correspond to other vendors' Ada 83 pragmas. For migrating from VADS, the pragma `Use_VADS_Size` may be useful. For compatibility with HP Ada 83, GNAT supplies the pragmas `Extend_System`, `Ident`, `Inline_Generic`, `Interface_Name`, `Passive`, `Suppress_All`, and `Volatile`. Other relevant pragmas include `External` and `Link_With`. Some vendor-specific Ada 83 pragmas (`Share_Generic`, `Subtitle`, and `Title`) are recognized, thus avoiding compiler rejection of units that contain such pragmas; they are not relevant in a GNAT context and hence are not otherwise implemented.

Next: Libraries, Previous: Implementation-defined pragmas, Up: Implementation-dependent characteristics

#### G.3.2 Implementation-defined attributes

Analogous to pragmas, the set of attributes may be extended by an implementation. All GNAT-defined attributes are described in Implementation Defined Attributes, and these include several that are specifically intended to correspond to other vendors' Ada 83 attributes. For migrating from VADS, the attribute `VADS_Size` may be useful. For compatibility with HP Ada 83, GNAT supplies the attributes `Bit`, `Machine_Size` and `Type_Class`.

Next: Elaboration order, Previous: Implementation-defined attributes, Up: Implementation-dependent characteristics

#### G.3.3 Libraries

Vendors may supply libraries to supplement the standard Ada API. If Ada 83 code uses vendor-specific libraries then there are several ways to manage this in Ada 95 or Ada 2005:

1. If the source code for the libraries (specs and bodies) are available, then the libraries can be migrated in the same way as the application.
2. If the source code for the specs but not the bodies are available, then you can reimplement the bodies.
3. Some features introduced by Ada 95 obviate the need for library support. For example most Ada 83 vendors supplied a package for unsigned integers. The Ada 95 modular type feature is the preferred way to handle this need, so instead of migrating or reimplementing the unsigned integer package it may be preferable to retrofit the application using modular types.

Next: Target-specific aspects, Previous: Libraries, Up: Implementation-dependent characteristics

#### G.3.4 Elaboration order

The implementation can choose any elaboration order consistent with the unit dependency relationship. This freedom means that some orders can result in Program_Error being raised due to an “Access Before Elaboration”: an attempt to invoke a subprogram its body has been elaborated, or to instantiate a generic before the generic body has been elaborated. By default GNAT attempts to choose a safe order (one that will not encounter access before elaboration problems) by implicitly inserting `Elaborate` or `Elaborate_All` pragmas where needed. However, this can lead to the creation of elaboration circularities and a resulting rejection of the program by gnatbind. This issue is thoroughly described in Elaboration Order Handling in GNAT. In brief, there are several ways to deal with this situation:

- Modify the program to eliminate the circularities, e.g. by moving elaboration-time code into explicitly-invoked procedures
- Constrain the elaboration order by including explicit `Elaborate_Body` or `Elaborate` pragmas, and then inhibit the generation of implicit `Elaborate_All` pragmas either globally (as an effect of the `-gnatE` switch) or locally (by selectively suppressing elaboration checks via pragma `Suppress(Elaboration_Check)` when it is safe to do so).

Previous: Elaboration order, Up: Implementation-dependent characteristics

#### G.3.5 Target-specific aspects

Low-level applications need to deal with machine addresses, data representations, interfacing with assembler code, and similar issues. If such an Ada 83 application is being ported to different target hardware (for example where the byte endianness has changed) then you will need to carefully examine the program logic; the porting effort will heavily depend on the robustness of the original design. Moreover, Ada 95 (and thus Ada 2005) are sometimes incompatible with typical Ada 83 compiler practices regarding implicit packing, the meaning of the Size attribute, and the size of access values. GNAT's approach to these issues is described in Representation Clauses.

Next: Representation Clauses, Previous: Implementation-dependent characteristics, Up: Compatibility and Porting Guide

### G.4 Compatibility with Other Ada Systems

If programs avoid the use of implementation dependent and implementation defined features, as documented in the Ada Reference Manual, there should be a high degree of portability between GNAT and other Ada systems. The following are specific items which have proved troublesome in moving Ada 95 programs from GNAT to other Ada 95 compilers, but do not affect porting code to GNAT. (As of January 2007, GNAT is the only compiler available for Ada 2005; the following issues may or may not arise for Ada 2005 programs when other compilers appear.)

Ada 83 Pragmas and Attributes
  Ada 95 compilers are allowed, but not required, to implement the missing Ada 83 pragmas and attributes that are no longer defined in Ada 95. GNAT implements all such pragmas and attributes, eliminating this as a compatibility concern, but some other Ada 95 compilers reject these pragmas and attributes.
Specialized Needs Annexes
  GNAT implements the full set of special needs annexes. At the current time, it is the only Ada 95 compiler to do so. This means that programs making use of these features may not be portable to other Ada 95 compilation systems.
Representation Clauses
  Some other Ada 95 compilers implement only the minimal set of representation clauses required by the Ada 95 reference manual. GNAT goes far beyond this minimal set, as described in the next section.

Next: Compatibility with HP Ada 83, Previous: Compatibility with Other Ada Systems, Up: Compatibility and Porting Guide

### G.5 Representation Clauses

The Ada 83 reference manual was quite vague in describing both the minimal required implementation of representation clauses, and also their precise effects. Ada 95 (and thus also Ada 2005) are much more explicit, but the minimal set of capabilities required is still quite limited.

GNAT implements the full required set of capabilities in Ada 95 and Ada 2005, but also goes much further, and in particular an effort has been made to be compatible with existing Ada 83 usage to the greatest extent possible.

A few cases exist in which Ada 83 compiler behavior is incompatible with the requirements in Ada 95 (and thus also Ada 2005). These are instances of intentional or accidental dependence on specific implementation dependent characteristics of these Ada 83 compilers. The following is a list of the cases most likely to arise in existing Ada 83 code.

Implicit Packing
  Some Ada 83 compilers allowed a Size specification to cause implicit packing of an array or record. This could cause expensive implicit conversions for change of representation in the presence of derived types, and the Ada design intends to avoid this possibility. Subsequent AI's were issued to make it clear that such implicit change of representation in response to a Size clause is inadvisable, and this recommendation is represented explicitly in the Ada 95 (and Ada 2005) Reference Manuals as implementation advice that is followed by GNAT. The problem will show up as an error message rejecting the size clause. The fix is simply to provide the explicit pragma `Pack`, or for more fine tuned control, provide a Component_Size clause.
Meaning of Size Attribute
  The Size attribute in Ada 95 (and Ada 2005) for discrete types is defined as the minimal number of bits required to hold values of the type. For example, on a 32-bit machine, the size of `Natural` will typically be 31 and not 32 (since no sign bit is required). Some Ada 83 compilers gave 31, and some 32 in this situation. This problem will usually show up as a compile time error, but not always. It is a good idea to check all uses of the 'Size attribute when porting Ada 83 code. The GNAT specific attribute Object_Size can provide a useful way of duplicating the behavior of some Ada 83 compiler systems.
Size of Access Types
  A common assumption in Ada 83 code is that an access type is in fact a pointer, and that therefore it will be the same size as a System.Address value. This assumption is true for GNAT in most cases with one exception. For the case of a pointer to an unconstrained array type (where the bounds may vary from one value of the access type to another), the default is to use a “fat pointer”, which is represented as two separate pointers, one to the bounds, and one to the array. This representation has a number of advantages, including improved efficiency. However, it may cause some difficulties in porting existing Ada 83 code which makes the assumption that, for example, pointers fit in 32 bits on a machine with 32-bit addressing.

  To get around this problem, GNAT also permits the use of “thin pointers” for access types in this case (where the designated type is an unconstrained array type). These thin pointers are indeed the same size as a System.Address value. To specify a thin pointer, use a size clause for the type, for example:

                type X is access all String;
                for X'Size use Standard'Address_Size;

  which will cause the type X to be represented using a single pointer. When using this representation, the bounds are right behind the array. This representation is slightly less efficient, and does not allow quite such flexibility in the use of foreign pointers or in using the Unrestricted_Access attribute to create pointers to non-aliased objects. But for any standard portable use of the access type it will work in a functionally correct manner and allow porting of existing code. Note that another way of forcing a thin pointer representation is to use a component size clause for the element size in an array, or a record representation clause for an access field in a record.

Previous: Representation Clauses, Up: Compatibility and Porting Guide

### G.6 Compatibility with HP Ada 83

The VMS version of GNAT fully implements all the pragmas and attributes provided by HP Ada 83, as well as providing the standard HP Ada 83 libraries, including Starlet. In addition, data layouts and parameter passing conventions are highly compatible. This means that porting existing HP Ada 83 code to GNAT in VMS systems should be easier than most other porting efforts. The following are some of the most significant differences between GNAT and HP Ada 83.

Default floating-point representation
  In GNAT, the default floating-point format is IEEE, whereas in HP Ada 83, it is VMS format. GNAT does implement the necessary pragmas (Long_Float, Float_Representation) for changing this default.
System
  The package System in GNAT exactly corresponds to the definition in the Ada 95 reference manual, which means that it excludes many of the HP Ada 83 extensions. However, a separate package Aux_DEC is provided that contains the additional definitions, and a special pragma, Extend_System allows this package to be treated transparently as an extension of package System.
To_Address
  The definitions provided by Aux_DEC are exactly compatible with those in the HP Ada 83 version of System, with one exception. HP Ada provides the following declarations:

                TO_ADDRESS (INTEGER)
                TO_ADDRESS (UNSIGNED_LONGWORD)
                TO_ADDRESS (universal_integer)

  The version of TO_ADDRESS taking a universal integer argument is in fact an extension to Ada 83 not strictly compatible with the reference manual. In GNAT, we are constrained to be exactly compatible with the standard, and this means we cannot provide this capability. In HP Ada 83, the point of this definition is to deal with a call like:

                TO_ADDRESS (16#12777#);

  Normally, according to the Ada 83 standard, one would expect this to be ambiguous, since it matches both the INTEGER and UNSIGNED_LONGWORD forms of TO_ADDRESS. However, in HP Ada 83, there is no ambiguity, since the definition using universal_integer takes precedence.

  In GNAT, since the version with universal_integer cannot be supplied, it is not possible to be 100% compatible. Since there are many programs using numeric constants for the argument to TO_ADDRESS, the decision in GNAT was to change the name of the function in the UNSIGNED_LONGWORD case, so the declarations provided in the GNAT version of AUX_Dec are:

                function To_Address (X : Integer) return Address;
                pragma Pure_Function (To_Address);

                function To_Address_Long (X : Unsigned_Longword)
                 return Address;
                pragma Pure_Function (To_Address_Long);

  This means that programs using TO_ADDRESS for UNSIGNED_LONGWORD must change the name to TO_ADDRESS_LONG.

Task_Id values
  The Task_Id values assigned will be different in the two systems, and GNAT does not provide a specified value for the Task_Id of the environment task, which in GNAT is treated like any other declared task.

For full details on these and other less significant compatibility issues, see appendix E of the HP publication entitled HP Ada, Technical Overview and Comparison on HP Platforms.

For GNAT running on other than VMS systems, all the HP Ada 83 pragmas and attributes are recognized, although only a subset of them can sensibly be implemented. The description of pragmas in Implementation Defined Pragmas indicates whether or not they are applicable to non-VMS systems.

Next: Mac OS Topics, Previous: Compatibility and Porting Guide, Up: Top

## Appendix H Microsoft Windows Topics

This chapter describes topics that are specific to the Microsoft Windows platforms (NT, 2000, and XP Professional).

Next: Using a network installation of GNAT, Up: Microsoft Windows Topics

### H.1 Using GNAT on Windows

One of the strengths of the GNAT technology is that its tool set (`gcc`, `gnatbind`, `gnatlink`, `gnatmake`, the `gdb` debugger, etc.) is used in the same way regardless of the platform.

On Windows this tool set is complemented by a number of Microsoft-specific tools that have been provided to facilitate interoperability with Windows when this is required. With these tools:

- You can build applications using the `CONSOLE` or `WINDOWS` subsystems.
- You can use any Dynamically Linked Library (DLL) in your Ada code (both relocatable and non-relocatable DLLs are supported).
- You can build Ada DLLs for use in other applications. These applications can be written in a language other than Ada (e.g., C, C++, etc). Again both relocatable and non-relocatable Ada DLLs are supported.
- You can include Windows resources in your Ada application.
- You can use or create COM/DCOM objects.

Immediately below are listed all known general GNAT-for-Windows restrictions. Other restrictions about specific features like Windows Resources and DLLs are listed in separate sections below.

- It is not possible to use `GetLastError` and `SetLastError` when tasking, protected records, or exceptions are used. In these cases, in order to implement Ada semantics, the GNAT run-time system calls certain Win32 routines that set the last error variable to 0 upon success. It should be possible to use `GetLastError` and `SetLastError` when tasking, protected record, and exception features are not used, but it is not guaranteed to work.
- It is not possible to link against Microsoft C++ libraries except for import libraries. Interfacing must be done by the mean of DLLs.
- It is possible to link against Microsoft C libraries. Yet the preferred solution is to use C/C++ compiler that comes with GNAT, since it doesn't require having two different development environments and makes the inter-language debugging experience smoother.
- When the compilation environment is located on FAT32 drives, users may experience recompilations of the source files that have not changed if Daylight Saving Time (DST) state has changed since the last time files were compiled. NTFS drives do not have this problem.
- No components of the GNAT toolset use any entries in the Windows registry. The only entries that can be created are file associations and PATH settings, provided the user has chosen to create them at installation time, as well as some minimal book-keeping information needed to correctly uninstall or integrate different GNAT products.

Next: CONSOLE and WINDOWS subsystems, Previous: Using GNAT on Windows, Up: Microsoft Windows Topics

### H.2 Using a network installation of GNAT

Make sure the system on which GNAT is installed is accessible from the current machine, i.e., the install location is shared over the network. Shared resources are accessed on Windows by means of UNC paths, which have the format `\\server\sharename\path`

In order to use such a network installation, simply add the UNC path of the `bin` directory of your GNAT installation in front of your PATH. For example, if GNAT is installed in `\GNAT` directory of a share location called `c-drive` on a machine `LOKI`, the following command will make it available:

`path \\loki\c-drive\gnat\bin;%path%`

Be aware that every compilation using the network installation results in the transfer of large amounts of data across the network and will likely cause serious performance penalty.

Next: Temporary Files, Previous: Using a network installation of GNAT, Up: Microsoft Windows Topics

### H.3 CONSOLE and WINDOWS subsystems

There are two main subsystems under Windows. The `CONSOLE` subsystem (which is the default subsystem) will always create a console when launching the application. This is not something desirable when the application has a Windows GUI. To get rid of this console the application must be using the `WINDOWS` subsystem. To do so the `-mwindows` linker option must be specified.

         $ gnatmake winprog -largs -mwindows

Next: Mixed-Language Programming on Windows, Previous: CONSOLE and WINDOWS subsystems, Up: Microsoft Windows Topics

### H.4 Temporary Files

It is possible to control where temporary files gets created by setting the `TMP` environment variable. The file will be created:

- Under the directory pointed to by the `TMP` environment variable if this directory exists.
- Under `c:\temp`, if the `TMP` environment variable is not set (or not pointing to a directory) and if this directory exists.
- Under the current working directory otherwise.

This allows you to determine exactly where the temporary file will be created. This is particularly useful in networked environments where you may not have write access to some directories.

Next: Windows Calling Conventions, Previous: Temporary Files, Up: Microsoft Windows Topics

### H.5 Mixed-Language Programming on Windows

Developing pure Ada applications on Windows is no different than on other GNAT-supported platforms. However, when developing or porting an application that contains a mix of Ada and C/C++, the choice of your Windows C/C++ development environment conditions your overall interoperability strategy.

If you use `gcc` or Microsoft C to compile the non-Ada part of your application, there are no Windows-specific restrictions that affect the overall interoperability with your Ada code. If you do want to use the Microsoft tools for your C++ code, you have two choices:

1. Encapsulate your C++ code in a DLL to be linked with your Ada application. In this case, use the Microsoft or whatever environment to build the DLL and use GNAT to build your executable (see Using DLLs with GNAT).
2. Or you can encapsulate your Ada code in a DLL to be linked with the other part of your application. In this case, use GNAT to build the DLL (see Building DLLs with GNAT Project files) and use the Microsoft or whatever environment to build your executable.

In addition to the description about C main in see Mixed Language Programming section, if the C main uses a stand-alone library it is required on x86-windows to setup the SEH context. For this the C main must looks like this:

         /* main.c */
         extern void adainit (void);
         extern void adafinal (void);
         extern void __gnat_initialize(void*);
         extern void call_to_ada (void);

         int main (int argc, char *argv[])
         {
           int SEH [2];

           /* Initialize the SEH context */
           __gnat_initialize (&SEH);

           adainit();

           /* Then call Ada services in the stand-alone library */

           call_to_ada();

           adafinal();
         }

Note that this is not needed on x86_64-windows where the Windows native SEH support is used.

Next: Introduction to Dynamic Link Libraries (DLLs), Previous: Mixed-Language Programming on Windows, Up: Microsoft Windows Topics

### H.6 Windows Calling Conventions

This section pertain only to Win32. On Win64 there is a single native calling convention. All convention specifiers are ignored on this platform.

When a subprogram `F` (caller) calls a subprogram `G` (callee), there are several ways to push `G`'s parameters on the stack and there are several possible scenarios to clean up the stack upon `G`'s return. A calling convention is an agreed upon software protocol whereby the responsibilities between the caller (`F`) and the callee (`G`) are clearly defined. Several calling conventions are available for Windows:

- `C` (Microsoft defined)
- `Stdcall` (Microsoft defined)
- `Win32` (GNAT specific)
- `DLL` (GNAT specific)

Next: Stdcall Calling Convention, Up: Windows Calling Conventions

#### H.6.1 `C` Calling Convention

This is the default calling convention used when interfacing to C/C++ routines compiled with either `gcc` or Microsoft Visual C++.

In the `C` calling convention subprogram parameters are pushed on the stack by the caller from right to left. The caller itself is in charge of cleaning up the stack after the call. In addition, the name of a routine with `C` calling convention is mangled by adding a leading underscore.

The name to use on the Ada side when importing (or exporting) a routine with `C` calling convention is the name of the routine. For instance the C function:

         int get_val (long);

should be imported from Ada as follows:

         function Get_Val (V : Interfaces.C.long) return Interfaces.C.int;
         pragma Import (C, Get_Val, External_Name => "get_val");

Note that in this particular case the `External_Name` parameter could have been omitted since, when missing, this parameter is taken to be the name of the Ada entity in lower case. When the `Link_Name` parameter is missing, as in the above example, this parameter is set to be the `External_Name` with a leading underscore.

When importing a variable defined in C, you should always use the `C` calling convention unless the object containing the variable is part of a DLL (in which case you should use the `Stdcall` calling convention, see Stdcall Calling Convention).

Next: Win32 Calling Convention, Previous: C Calling Convention, Up: Windows Calling Conventions

#### H.6.2 `Stdcall` Calling Convention

This convention, which was the calling convention used for Pascal programs, is used by Microsoft for all the routines in the Win32 API for efficiency reasons. It must be used to import any routine for which this convention was specified.

In the `Stdcall` calling convention subprogram parameters are pushed on the stack by the caller from right to left. The callee (and not the caller) is in charge of cleaning the stack on routine exit. In addition, the name of a routine with `Stdcall` calling convention is mangled by adding a leading underscore (as for the `C` calling convention) and a trailing `@`nn, where nn is the overall size (in bytes) of the parameters passed to the routine.

The name to use on the Ada side when importing a C routine with a `Stdcall` calling convention is the name of the C routine. The leading underscore and trailing `@`nn are added automatically by the compiler. For instance the Win32 function:

         APIENTRY int get_val (long);

should be imported from Ada as follows:

         function Get_Val (V : Interfaces.C.long) return Interfaces.C.int;
         pragma Import (Stdcall, Get_Val);
         --  On the x86 a long is 4 bytes, so the Link_Name is "_get_val@4"

As for the `C` calling convention, when the `External_Name` parameter is missing, it is taken to be the name of the Ada entity in lower case. If instead of writing the above import pragma you write:

         function Get_Val (V : Interfaces.C.long) return Interfaces.C.int;
         pragma Import (Stdcall, Get_Val, External_Name => "retrieve_val");

then the imported routine is `_retrieve_val@4`. However, if instead of specifying the `External_Name` parameter you specify the `Link_Name` as in the following example:

         function Get_Val (V : Interfaces.C.long) return Interfaces.C.int;
         pragma Import (Stdcall, Get_Val, Link_Name => "retrieve_val");

then the imported routine is `retrieve_val`, that is, there is no decoration at all. No leading underscore and no Stdcall suffix `@`nn.

This is especially important as in some special cases a DLL's entry point name lacks a trailing `@`nn while the exported name generated for a call has it.

It is also possible to import variables defined in a DLL by using an import pragma for a variable. As an example, if a DLL contains a variable defined as:

         int my_var;

then, to access this variable from Ada you should write:

         My_Var : Interfaces.C.int;
         pragma Import (Stdcall, My_Var);

Note that to ease building cross-platform bindings this convention will be handled as a `C` calling convention on non-Windows platforms.

Next: DLL Calling Convention, Previous: Stdcall Calling Convention, Up: Windows Calling Conventions

#### H.6.3 `Win32` Calling Convention

This convention, which is GNAT-specific is fully equivalent to the `Stdcall` calling convention described above.

Previous: Win32 Calling Convention, Up: Windows Calling Conventions

#### H.6.4 `DLL` Calling Convention

This convention, which is GNAT-specific is fully equivalent to the `Stdcall` calling convention described above.

Next: Using DLLs with GNAT, Previous: Windows Calling Conventions, Up: Microsoft Windows Topics

### H.7 Introduction to Dynamic Link Libraries (DLLs)

A Dynamically Linked Library (DLL) is a library that can be shared by several applications running under Windows. A DLL can contain any number of routines and variables.

One advantage of DLLs is that you can change and enhance them without forcing all the applications that depend on them to be relinked or recompiled. However, you should be aware than all calls to DLL routines are slower since, as you will understand below, such calls are indirect.

To illustrate the remainder of this section, suppose that an application wants to use the services of a DLL `API.dll`. To use the services provided by `API.dll` you must statically link against the DLL or an import library which contains a jump table with an entry for each routine and variable exported by the DLL. In the Microsoft world this import library is called `API.lib`. When using GNAT this import library is called either `libAPI.dll.a`, `libapi.dll.a`, `libAPI.a` or `libapi.a` (names are case insensitive).

After you have linked your application with the DLL or the import library and you run your application, here is what happens:

1. Your application is loaded into memory.
2. The DLL `API.dll` is mapped into the address space of your application. This means that:
   - The DLL will use the stack of the calling thread.
   - The DLL will use the virtual address space of the calling process.
   - The DLL will allocate memory from the virtual address space of the calling process.
   - Handles (pointers) can be safely exchanged between routines in the DLL routines and routines in the application using the DLL.
3. The entries in the jump table (from the import library `libAPI.dll.a` or `API.lib` or automatically created when linking against a DLL) which is part of your application are initialized with the addresses of the routines and variables in `API.dll`.
4. If present in `API.dll`, routines `DllMain` or `DllMainCRTStartup` are invoked. These routines typically contain the initialization code needed for the well-being of the routines and variables exported by the DLL.

There is an additional point which is worth mentioning. In the Windows world there are two kind of DLLs: relocatable and non-relocatable DLLs. Non-relocatable DLLs can only be loaded at a very specific address in the target application address space. If the addresses of two non-relocatable DLLs overlap and these happen to be used by the same application, a conflict will occur and the application will run incorrectly. Hence, when possible, it is always preferable to use and build relocatable DLLs. Both relocatable and non-relocatable DLLs are supported by GNAT. Note that the `-s` linker option (see GNU Linker User's Guide) removes the debugging symbols from the DLL but the DLL can still be relocated.

As a side note, an interesting difference between Microsoft DLLs and Unix shared libraries, is the fact that on most Unix systems all public routines are exported by default in a Unix shared library, while under Windows it is possible (but not required) to list exported routines in a definition file (see The Definition File).

Next: Building DLLs with GNAT Project files, Previous: Introduction to Dynamic Link Libraries (DLLs), Up: Microsoft Windows Topics

### H.8 Using DLLs with GNAT

To use the services of a DLL, say `API.dll`, in your Ada application you must have:

1. The Ada spec for the routines and/or variables you want to access in `API.dll`. If not available this Ada spec must be built from the C/C++ header files provided with the DLL.
2. The import library (`libAPI.dll.a` or `API.lib`). As previously mentioned an import library is a statically linked library containing the import table which will be filled at load time to point to the actual `API.dll` routines. Sometimes you don't have an import library for the DLL you want to use. The following sections will explain how to build one. Note that this is optional.
3. The actual DLL, `API.dll`.

Once you have all the above, to compile an Ada application that uses the services of `API.dll` and whose main subprogram is `My_Ada_App`, you simply issue the command

         $ gnatmake my_ada_app -largs -lAPI

The argument `-largs -lAPI` at the end of the `gnatmake` command tells the GNAT linker to look for an import library. The linker will look for a library name in this specific order:

1. `libAPI.dll.a`
2. `API.dll.a`
3. `libAPI.a`
4. `API.lib`
5. `libAPI.dll`
6. `API.dll`

The first three are the GNU style import libraries. The third is the Microsoft style import libraries. The last two are the actual DLL names.

Note that if the Ada package spec for `API.dll` contains the following pragma

         pragma Linker_Options ("-lAPI");

you do not have to add `-largs -lAPI` at the end of the `gnatmake` command.

If any one of the items above is missing you will have to create it yourself. The following sections explain how to do so using as an example a fictitious DLL called `API.dll`.

Next: Creating an Import Library, Up: Using DLLs with GNAT

#### H.8.1 Creating an Ada Spec for the DLL Services

A DLL typically comes with a C/C++ header file which provides the definitions of the routines and variables exported by the DLL. The Ada equivalent of this header file is a package spec that contains definitions for the imported entities. If the DLL you intend to use does not come with an Ada spec you have to generate one such spec yourself. For example if the header file of `API.dll` is a file `api.h` containing the following two definitions:

         int some_var;
         int get (char *);

then the equivalent Ada spec could be:

         with Interfaces.C.Strings;
         package API is
            use Interfaces;

            Some_Var : C.int;
            function Get (Str : C.Strings.Chars_Ptr) return C.int;

         private
            pragma Import (C, Get);
            pragma Import (DLL, Some_Var);
         end API;

Note that a variable is always imported with a DLL convention. A function can have `C` or `Stdcall` convention. (see Windows Calling Conventions).

Previous: Creating an Ada Spec for the DLL Services, Up: Using DLLs with GNAT

#### H.8.2 Creating an Import Library

If a Microsoft-style import library `API.lib` or a GNAT-style import library `libAPI.dll.a` or `libAPI.a` is available with `API.dll` you can skip this section. You can also skip this section if `API.dll` or `libAPI.dll` is built with GNU tools as in this case it is possible to link directly against the DLL. Otherwise read on.

Next: GNAT-Style Import Library, Up: Creating an Import Library

##### H.8.2.1 The Definition File

As previously mentioned, and unlike Unix systems, the list of symbols that are exported from a DLL must be provided explicitly in Windows. The main goal of a definition file is precisely that: list the symbols exported by a DLL. A definition file (usually a file with a `.def` suffix) has the following structure:

         [LIBRARY name]
         [DESCRIPTION string]
         EXPORTS
            symbol1
            symbol2
            ...

`LIBRARY` name
  This section, which is optional, gives the name of the DLL.
`DESCRIPTION` string
  This section, which is optional, gives a description string that will be embedded in the import library.
`EXPORTS`
  This section gives the list of exported symbols (procedures, functions or variables). For instance in the case of `API.dll` the `EXPORTS` section of `API.def` looks like:

                EXPORTS
                   some_var
                   get

Note that you must specify the correct suffix (`@`nn) (see Windows Calling Conventions) for a Stdcall calling convention function in the exported symbols list.

There can actually be other sections in a definition file, but these sections are not relevant to the discussion at hand.

Next: Microsoft-Style Import Library, Previous: The Definition File, Up: Creating an Import Library

##### H.8.2.2 GNAT-Style Import Library

To create a static import library from `API.dll` with the GNAT tools you should proceed as follows:

1. Create the definition file `API.def` (see The Definition File). For that use the `dll2def` tool as follows:

                 $ dll2def API.dll > API.def

   `dll2def` is a very simple tool: it takes as input a DLL and prints to standard output the list of entry points in the DLL. Note that if some routines in the DLL have the `Stdcall` convention (see Windows Calling Conventions) with stripped `@`nn suffix then you'll have to edit `api.def` to add it, and specify `-k` to `gnatdll` when creating the import library.

   Here are some hints to find the right `@`nn suffix.

   1. If you have the Microsoft import library (.lib), it is possible to get the right symbols by using Microsoft `dumpbin` tool (see the corresponding Microsoft documentation for further details).

                         $ dumpbin /exports api.lib

   2. If you have a message about a missing symbol at link time the compiler tells you what symbol is expected. You just have to go back to the definition file and add the right suffix.
2. Build the import library `libAPI.dll.a`, using `gnatdll` (see Using gnatdll) as follows:

                 $ gnatdll -e API.def -d API.dll

   `gnatdll` takes as input a definition file `API.def` and the name of the DLL containing the services listed in the definition file `API.dll`. The name of the static import library generated is computed from the name of the definition file as follows: if the definition file name is xyz`.def`, the import library name will be `lib` xyz`.a`. Note that in the previous example option `-e` could have been removed because the name of the definition file (before the “`.def`” suffix) is the same as the name of the DLL (see Using gnatdll for more information about `gnatdll`).

Previous: GNAT-Style Import Library, Up: Creating an Import Library

##### H.8.2.3 Microsoft-Style Import Library

With GNAT you can either use a GNAT-style or Microsoft-style import library. A Microsoft import library is needed only if you plan to make an Ada DLL available to applications developed with Microsoft tools (see Mixed-Language Programming on Windows).

To create a Microsoft-style import library for `API.dll` you should proceed as follows:

1. Create the definition file `API.def` from the DLL. For this use either the `dll2def` tool as described above or the Microsoft `dumpbin` tool (see the corresponding Microsoft documentation for further details).
2. Build the actual import library using Microsoft's `lib` utility:

                 $ lib -machine:IX86 -def:API.def -out:API.lib

   If you use the above command the definition file `API.def` must contain a line giving the name of the DLL:

                 LIBRARY      "API"

   See the Microsoft documentation for further details about the usage of `lib`.

Next: Building DLLs with GNAT, Previous: Using DLLs with GNAT, Up: Microsoft Windows Topics

### H.9 Building DLLs with GNAT Project files

There is nothing specific to Windows in the build process. see Library Projects.

Due to a system limitation, it is not possible under Windows to create threads when inside the `DllMain` routine which is used for auto-initialization of shared libraries, so it is not possible to have library level tasks in SALs.

Next: Building DLLs with gnatdll, Previous: Building DLLs with GNAT Project files, Up: Microsoft Windows Topics

### H.10 Building DLLs with GNAT

This section explain how to build DLLs using the GNAT built-in DLL support. With the following procedure it is straight forward to build and use DLLs with GNAT.

1. building object files

   The first step is to build all objects files that are to be included into the DLL. This is done by using the standard `gnatmake` tool.

2. building the DLL

   To build the DLL you must use `gcc`'s `-shared` and `-shared-libgcc` options. It is quite simple to use this method:

                 $ gcc -shared -shared-libgcc -o api.dll obj1.o obj2.o ...

   It is important to note that in this case all symbols found in the object files are automatically exported. It is possible to restrict the set of symbols to export by passing to `gcc` a definition file, see The Definition File. For example:

                 $ gcc -shared -shared-libgcc -o api.dll api.def obj1.o obj2.o ...

   If you use a definition file you must export the elaboration procedures for every package that required one. Elaboration procedures are named using the package name followed by "_E".

3. preparing DLL to be used

   For the DLL to be used by client programs the bodies must be hidden from it and the .ali set with read-only attribute. This is very important otherwise GNAT will recompile all packages and will not actually use the code in the DLL. For example:

                 $ mkdir apilib
                 $ copy *.ads *.ali api.dll apilib
                 $ attrib +R apilib\*.ali

At this point it is possible to use the DLL by directly linking against it. Note that you must use the GNAT shared runtime when using GNAT shared libraries. This is achieved by using `-shared` binder's option.

         $ gnatmake main -Iapilib -bargs -shared -largs -Lapilib -lAPI

Next: GNAT and Windows Resources, Previous: Building DLLs with GNAT, Up: Microsoft Windows Topics

### H.11 Building DLLs with gnatdll

Note that it is preferred to use GNAT Project files (see Building DLLs with GNAT Project files) or the built-in GNAT DLL support (see Building DLLs with GNAT) or to build DLLs.

This section explains how to build DLLs containing Ada code using `gnatdll`. These DLLs will be referred to as Ada DLLs in the remainder of this section.

The steps required to build an Ada DLL that is to be used by Ada as well as non-Ada applications are as follows:

1. You need to mark each Ada entity exported by the DLL with a `C` or `Stdcall` calling convention to avoid any Ada name mangling for the entities exported by the DLL (see Exporting Ada Entities). You can skip this step if you plan to use the Ada DLL only from Ada applications.
2. Your Ada code must export an initialization routine which calls the routine `adainit` generated by `gnatbind` to perform the elaboration of the Ada code in the DLL (see Ada DLLs and Elaboration). The initialization routine exported by the Ada DLL must be invoked by the clients of the DLL to initialize the DLL.
3. When useful, the DLL should also export a finalization routine which calls routine `adafinal` generated by `gnatbind` to perform the finalization of the Ada code in the DLL (see Ada DLLs and Finalization). The finalization routine exported by the Ada DLL must be invoked by the clients of the DLL when the DLL services are no further needed.
4. You must provide a spec for the services exported by the Ada DLL in each of the programming languages to which you plan to make the DLL available.
5. You must provide a definition file listing the exported entities (see The Definition File).
6. Finally you must use `gnatdll` to produce the DLL and the import library (see Using gnatdll).

Note that a relocatable DLL stripped using the `strip` binutils tool will not be relocatable anymore. To build a DLL without debug information pass `-largs -s` to `gnatdll`. This restriction does not apply to a DLL built using a Library Project. see Library Projects.

Next: Exporting Ada Entities, Up: Building DLLs with gnatdll

#### H.11.1 Limitations When Using Ada DLLs from Ada

When using Ada DLLs from Ada applications there is a limitation users should be aware of. Because on Windows the GNAT run time is not in a DLL of its own, each Ada DLL includes a part of the GNAT run time. Specifically, each Ada DLL includes the services of the GNAT run time that are necessary to the Ada code inside the DLL. As a result, when an Ada program uses an Ada DLL there are two independent GNAT run times: one in the Ada DLL and one in the main program.

It is therefore not possible to exchange GNAT run-time objects between the Ada DLL and the main Ada program. Example of GNAT run-time objects are file handles (e.g. `Text_IO.File_Type`), tasks types, protected objects types, etc.

It is completely safe to exchange plain elementary, array or record types, Windows object handles, etc.

Next: Ada DLLs and Elaboration, Previous: Limitations When Using Ada DLLs from Ada, Up: Building DLLs with gnatdll

#### H.11.2 Exporting Ada Entities

Building a DLL is a way to encapsulate a set of services usable from any application. As a result, the Ada entities exported by a DLL should be exported with the `C` or `Stdcall` calling conventions to avoid any Ada name mangling. As an example here is an Ada package `API`, spec and body, exporting two procedures, a function, and a variable:

         with Interfaces.C; use Interfaces;
         package API is
            Count : C.int := 0;
            function Factorial (Val : C.int) return C.int;

            procedure Initialize_API;
            procedure Finalize_API;
            --  Initialization & Finalization routines. More in the next section.
         private
            pragma Export (C, Initialize_API);
            pragma Export (C, Finalize_API);
            pragma Export (C, Count);
            pragma Export (C, Factorial);
         end API;

         package body API is
            function Factorial (Val : C.int) return C.int is
               Fact : C.int := 1;
            begin
               Count := Count + 1;
               for K in 1 .. Val loop
                  Fact := Fact * K;
               end loop;
               return Fact;
            end Factorial;

            procedure Initialize_API is
               procedure Adainit;
               pragma Import (C, Adainit);
            begin
               Adainit;
            end Initialize_API;

            procedure Finalize_API is
               procedure Adafinal;
               pragma Import (C, Adafinal);
            begin
               Adafinal;
            end Finalize_API;
         end API;

If the Ada DLL you are building will only be used by Ada applications you do not have to export Ada entities with a `C` or `Stdcall` convention. As an example, the previous package could be written as follows:

         package API is
            Count : Integer := 0;
            function Factorial (Val : Integer) return Integer;

            procedure Initialize_API;
            procedure Finalize_API;
            --  Initialization and Finalization routines.
         end API;

         package body API is
            function Factorial (Val : Integer) return Integer is
               Fact : Integer := 1;
            begin
               Count := Count + 1;
               for K in 1 .. Val loop
                  Fact := Fact * K;
               end loop;
               return Fact;
            end Factorial;

            ...
            --  The remainder of this package body is unchanged.
         end API;

Note that if you do not export the Ada entities with a `C` or `Stdcall` convention you will have to provide the mangled Ada names in the definition file of the Ada DLL (see Creating the Definition File).

Next: Ada DLLs and Finalization, Previous: Exporting Ada Entities, Up: Building DLLs with gnatdll

#### H.11.3 Ada DLLs and Elaboration

The DLL that you are building contains your Ada code as well as all the routines in the Ada library that are needed by it. The first thing a user of your DLL must do is elaborate the Ada code (see Elaboration Order Handling in GNAT).

To achieve this you must export an initialization routine (`Initialize_API` in the previous example), which must be invoked before using any of the DLL services. This elaboration routine must call the Ada elaboration routine `adainit` generated by the GNAT binder (see Binding with Non-Ada Main Programs). See the body of `Initialize_Api` for an example. Note that the GNAT binder is automatically invoked during the DLL build process by the `gnatdll` tool (see Using gnatdll).

When a DLL is loaded, Windows systematically invokes a routine called `DllMain`. It would therefore be possible to call `adainit` directly from `DllMain` without having to provide an explicit initialization routine. Unfortunately, it is not possible to call `adainit` from the `DllMain` if your program has library level tasks because access to the `DllMain` entry point is serialized by the system (that is, only a single thread can execute “through” it at a time), which means that the GNAT run time will deadlock waiting for the newly created task to complete its initialization.

Next: Creating a Spec for Ada DLLs, Previous: Ada DLLs and Elaboration, Up: Building DLLs with gnatdll

#### H.11.4 Ada DLLs and Finalization

When the services of an Ada DLL are no longer needed, the client code should invoke the DLL finalization routine, if available. The DLL finalization routine is in charge of releasing all resources acquired by the DLL. In the case of the Ada code contained in the DLL, this is achieved by calling routine `adafinal` generated by the GNAT binder (see Binding with Non-Ada Main Programs). See the body of `Finalize_Api` for an example. As already pointed out the GNAT binder is automatically invoked during the DLL build process by the `gnatdll` tool (see Using gnatdll).

Next: Creating the Definition File, Previous: Ada DLLs and Finalization, Up: Building DLLs with gnatdll

#### H.11.5 Creating a Spec for Ada DLLs

To use the services exported by the Ada DLL from another programming language (e.g. C), you have to translate the specs of the exported Ada entities in that language. For instance in the case of `API.dll`, the corresponding C header file could look like:

         extern int *_imp__count;
         #define count (*_imp__count)
         int factorial (int);

It is important to understand that when building an Ada DLL to be used by other Ada applications, you need two different specs for the packages contained in the DLL: one for building the DLL and the other for using the DLL. This is because the `DLL` calling convention is needed to use a variable defined in a DLL, but when building the DLL, the variable must have either the `Ada` or `C` calling convention. As an example consider a DLL comprising the following package `API`:

         package API is
            Count : Integer := 0;
            ...
            --  Remainder of the package omitted.
         end API;

After producing a DLL containing package `API`, the spec that must be used to import `API.Count` from Ada code outside of the DLL is:

         package API is
            Count : Integer;
            pragma Import (DLL, Count);
         end API;

Next: Using gnatdll, Previous: Creating a Spec for Ada DLLs, Up: Building DLLs with gnatdll

#### H.11.6 Creating the Definition File

The definition file is the last file needed to build the DLL. It lists the exported symbols. As an example, the definition file for a DLL containing only package `API` (where all the entities are exported with a `C` calling convention) is:

         EXPORTS
             count
             factorial
             finalize_api
             initialize_api

If the `C` calling convention is missing from package `API`, then the definition file contains the mangled Ada names of the above entities, which in this case are:

         EXPORTS
             api__count
             api__factorial
             api__finalize_api
             api__initialize_api

Previous: Creating the Definition File, Up: Building DLLs with gnatdll

#### H.11.7 Using `gnatdll`

`gnatdll` is a tool to automate the DLL build process once all the Ada and non-Ada sources that make up your DLL have been compiled. `gnatdll` is actually in charge of two distinct tasks: build the static import library for the DLL and the actual DLL. The form of the `gnatdll` command is

         $ gnatdll [switches] list-of-files [-largs opts]

where list-of-files is a list of ALI and object files. The object file list must be the exact list of objects corresponding to the non-Ada sources whose services are to be included in the DLL. The ALI file list must be the exact list of ALI files for the corresponding Ada sources whose services are to be included in the DLL. If list-of-files is missing, only the static import library is generated.

You may specify any of the following switches to `gnatdll`:

`-a`[address]
  Build a non-relocatable DLL at address. If address is not specified the default address 0x11000000 will be used. By default, when this switch is missing, `gnatdll` builds relocatable DLL. We advise the reader to build relocatable DLL.
`-b` address
  Set the relocatable DLL base address. By default the address is `0x11000000`.
`-bargs` opts
  Binder options. Pass opts to the binder.
`-d` dllfile
  dllfile is the name of the DLL. This switch must be present for `gnatdll` to do anything. The name of the generated import library is obtained algorithmically from dllfile as shown in the following example: if dllfile is `xyz.dll`, the import library name is `libxyz.dll.a`. The name of the definition file to use (if not specified by option `-e`) is obtained algorithmically from dllfile as shown in the following example: if dllfile is `xyz.dll`, the definition file used is `xyz.def`.
`-e` deffile
  deffile is the name of the definition file.
`-g`
  Generate debugging information. This information is stored in the object file and copied from there to the final DLL file by the linker, where it can be read by the debugger. You must use the `-g` switch if you plan on using the debugger or the symbolic stack traceback.
`-h`
  Help mode. Displays `gnatdll` switch usage information.
`-Idir`
  Direct `gnatdll` to search the dir directory for source and object files needed to build the DLL. (see Search Paths and the Run-Time Library (RTL)).
`-k`
  Removes the `@`nn suffix from the import library's exported names, but keeps them for the link names. You must specify this option if you want to use a `Stdcall` function in a DLL for which the `@`nn suffix has been removed. This is the case for most of the Windows NT DLL for example. This option has no effect when `-n` option is specified.
`-l` file
  The list of ALI and object files used to build the DLL are listed in file, instead of being given in the command line. Each line in file contains the name of an ALI or object file.
`-n`
  No Import. Do not create the import library.
`-q`
  Quiet mode. Do not display unnecessary messages.
`-v`
  Verbose mode. Display extra information.
`-largs` opts
  Linker options. Pass opts to the linker.

Next: gnatdll behind the Scenes, Up: Using gnatdll

##### H.11.7.1 `gnatdll` Example

As an example the command to build a relocatable DLL from `api.adb` once `api.adb` has been compiled and `api.def` created is

         $ gnatdll -d api.dll api.ali

The above command creates two files: `libapi.dll.a` (the import library) and `api.dll` (the actual DLL). If you want to create only the DLL, just type:

         $ gnatdll -d api.dll -n api.ali

Alternatively if you want to create just the import library, type:

         $ gnatdll -d api.dll

Next: Using dlltool, Previous: gnatdll Example, Up: Using gnatdll

##### H.11.7.2 `gnatdll` behind the Scenes

This section details the steps involved in creating a DLL. `gnatdll` does these steps for you. Unless you are interested in understanding what goes on behind the scenes, you should skip this section.

We use the previous example of a DLL containing the Ada package `API`, to illustrate the steps necessary to build a DLL. The starting point is a set of objects that will make up the DLL and the corresponding ALI files. In the case of this example this means that `api.o` and `api.ali` are available. To build a relocatable DLL, `gnatdll` does the following:

1. `gnatdll` builds the base file (`api.base`). A base file gives the information necessary to generate relocation information for the DLL.

                 $ gnatbind -n api
                 $ gnatlink api -o api.jnk -mdll -Wl,--base-file,api.base

   In addition to the base file, the `gnatlink` command generates an output file `api.jnk` which can be discarded. The `-mdll` switch asks `gnatlink` to generate the routines `DllMain` and `DllMainCRTStartup` that are called by the Windows loader when the DLL is loaded into memory.

2. `gnatdll` uses `dlltool` (see Using dlltool) to build the export table (`api.exp`). The export table contains the relocation information in a form which can be used during the final link to ensure that the Windows loader is able to place the DLL anywhere in memory.

                 $ dlltool --dllname api.dll --def api.def --base-file api.base \
                           --output-exp api.exp

3. `gnatdll` builds the base file using the new export table. Note that `gnatbind` must be called once again since the binder generated file has been deleted during the previous call to `gnatlink`.

                 $ gnatbind -n api
                 $ gnatlink api -o api.jnk api.exp -mdll
                       -Wl,--base-file,api.base

4. `gnatdll` builds the new export table using the new base file and generates the DLL import library `libAPI.dll.a`.

                 $ dlltool --dllname api.dll --def api.def --base-file api.base \
                           --output-exp api.exp --output-lib libAPI.a

5. Finally `gnatdll` builds the relocatable DLL using the final export table.

                 $ gnatbind -n api
                 $ gnatlink api api.exp -o api.dll -mdll

Previous: gnatdll behind the Scenes, Up: Using gnatdll

##### H.11.7.3 Using `dlltool`

`dlltool` is the low-level tool used by `gnatdll` to build DLLs and static import libraries. This section summarizes the most common `dlltool` switches. The form of the `dlltool` command is

         $ dlltool [switches]

`dlltool` switches include:

`--base-file basefile`
  Read the base file basefile generated by the linker. This switch is used to create a relocatable DLL.
`--def deffile`
  Read the definition file.
`--dllname name`
  Gives the name of the DLL. This switch is used to embed the name of the DLL in the static import library generated by `dlltool` with switch `--output-lib`.
`-k`
  Kill `@`nn from exported names (see Windows Calling Conventions for a discussion about `Stdcall`-style symbols.
`--help`
  Prints the `dlltool` switches with a concise description.
`--output-exp exportfile`
  Generate an export file exportfile. The export file contains the export table (list of symbols in the DLL) and is used to create the DLL.
`--output-lib libfile`
  Generate a static import library libfile.
`-v`
  Verbose mode.
`--as assembler-name`
  Use assembler-name as the assembler. The default is `as`.

Next: Debugging a DLL, Previous: Building DLLs with gnatdll, Up: Microsoft Windows Topics

### H.12 GNAT and Windows Resources

Resources are an easy way to add Windows specific objects to your application. The objects that can be added as resources include:

- menus
- accelerators
- dialog boxes
- string tables
- bitmaps
- cursors
- icons
- fonts
- version information

For example, a version information resource can be defined as follow and embedded into an executable or DLL:

A version information resource can be used to embed information into an executable or a DLL. These information can be viewed using the file properties from the Windows Explorer. Here is an example of a version information resource:

         1 VERSIONINFO
         FILEVERSION     1,0,0,0
         PRODUCTVERSION  1,0,0,0
         BEGIN
           BLOCK "StringFileInfo"
           BEGIN
             BLOCK "080904E4"
             BEGIN
               VALUE "CompanyName", "My Company Name"
               VALUE "FileDescription", "My application"
               VALUE "FileVersion", "1.0"
               VALUE "InternalName", "my_app"
               VALUE "LegalCopyright", "My Name"
               VALUE "OriginalFilename", "my_app.exe"
               VALUE "ProductName", "My App"
               VALUE "ProductVersion", "1.0"
             END
           END

           BLOCK "VarFileInfo"
           BEGIN
             VALUE "Translation", 0x809, 1252
           END
         END

The value `0809` (langID) is for the U.K English language and `04E4` (charsetID), which is equal to `1252` decimal, for multilingual.

This section explains how to build, compile and use resources. Note that this section does not cover all resource objects, for a complete description see the corresponding Microsoft documentation.

Next: Compiling Resources, Up: GNAT and Windows Resources

#### H.12.1 Building Resources

A resource file is an ASCII file. By convention resource files have an `.rc` extension. The easiest way to build a resource file is to use Microsoft tools such as `imagedit.exe` to build bitmaps, icons and cursors and `dlgedit.exe` to build dialogs. It is always possible to build an `.rc` file yourself by writing a resource script.

It is not our objective to explain how to write a resource file. A complete description of the resource script language can be found in the Microsoft documentation.

Next: Using Resources, Previous: Building Resources, Up: GNAT and Windows Resources

#### H.12.2 Compiling Resources

This section describes how to build a GNAT-compatible (COFF) object file containing the resources. This is done using the Resource Compiler `windres` as follows:

         $ windres -i myres.rc -o myres.o

By default `windres` will run `gcc` to preprocess the `.rc` file. You can specify an alternate preprocessor (usually named `cpp.exe`) using the `windres` `--preprocessor` parameter. A list of all possible options may be obtained by entering the command `windres` `--help`.

It is also possible to use the Microsoft resource compiler `rc.exe` to produce a `.res` file (binary resource file). See the corresponding Microsoft documentation for further details. In this case you need to use `windres` to translate the `.res` file to a GNAT-compatible object file as follows:

         $ windres -i myres.res -o myres.o

Previous: Compiling Resources, Up: GNAT and Windows Resources

#### H.12.3 Using Resources

To include the resource file in your program just add the GNAT-compatible object file for the resource(s) to the linker arguments. With `gnatmake` this is done by using the `-largs` option:

         $ gnatmake myprog -largs myres.o

Next: Setting Stack Size from gnatlink, Previous: GNAT and Windows Resources, Up: Microsoft Windows Topics

### H.13 Debugging a DLL

Debugging a DLL is similar to debugging a standard program. But we have to deal with two different executable parts: the DLL and the program that uses it. We have the following four possibilities:

1. The program and the DLL are built with `GCC/GNAT`.
2. The program is built with foreign tools and the DLL is built with `GCC/GNAT`.
3. The program is built with `GCC/GNAT` and the DLL is built with foreign tools.

In this section we address only cases one and two above. There is no point in trying to debug a DLL with `GNU/GDB`, if there is no GDB-compatible debugging information in it. To do so you must use a debugger compatible with the tools suite used to build the DLL.

Next: Program Built with Foreign Tools and DLL Built with GCC/GNAT, Up: Debugging a DLL

#### H.13.1 Program and DLL Both Built with GCC/GNAT

This is the simplest case. Both the DLL and the program have `GDB` compatible debugging information. It is then possible to break anywhere in the process. Let's suppose here that the main procedure is named `ada_main` and that in the DLL there is an entry point named `ada_dll`.

The DLL (see Introduction to Dynamic Link Libraries (DLLs)) and program must have been built with the debugging information (see GNAT -g switch). Here are the step-by-step instructions for debugging it:

1. Launch `GDB` on the main program.

                 $ gdb -nw ada_main

2. Start the program and stop at the beginning of the main procedure

                 (gdb) start

   This step is required to be able to set a breakpoint inside the DLL. As long as the program is not run, the DLL is not loaded. This has the consequence that the DLL debugging information is also not loaded, so it is not possible to set a breakpoint in the DLL.

3. Set a breakpoint inside the DLL

                 (gdb) break ada_dll
                 (gdb) cont

At this stage a breakpoint is set inside the DLL. From there on you can use the standard approach to debug the whole program (see Running and Debugging Ada Programs).

Previous: Program and DLL Both Built with GCC/GNAT, Up: Debugging a DLL

#### H.13.2 Program Built with Foreign Tools and DLL Built with GCC/GNAT

In this case things are slightly more complex because it is not possible to start the main program and then break at the beginning to load the DLL and the associated DLL debugging information. It is not possible to break at the beginning of the program because there is no `GDB` debugging information, and therefore there is no direct way of getting initial control. This section addresses this issue by describing some methods that can be used to break somewhere in the DLL to debug it.

First suppose that the main procedure is named `main` (this is for example some C code built with Microsoft Visual C) and that there is a DLL named `test.dll` containing an Ada entry point named `ada_dll`.

The DLL (see Introduction to Dynamic Link Libraries (DLLs)) must have been built with debugging information (see GNAT -g option).

Next: Attaching to a Running Process, Up: Program Built with Foreign Tools and DLL Built with GCC/GNAT

##### H.13.2.1 Debugging the DLL Directly

1. Find out the executable starting address

                 $ objdump --file-header main.exe

   The starting address is reported on the last line. For example:

                 main.exe:     file format pei-i386
                 architecture: i386, flags 0x0000010a:
                 EXEC_P, HAS_DEBUG, D_PAGED
                 start address 0x00401010

2. Launch the debugger on the executable.

                 $ gdb main.exe

3. Set a breakpoint at the starting address, and launch the program.

                 $ (gdb) break *0x00401010
                 $ (gdb) run

   The program will stop at the given address.

4. Set a breakpoint on a DLL subroutine.

                 (gdb) break ada_dll.adb:45

   Or if you want to break using a symbol on the DLL, you need first to select the Ada language (language used by the DLL).

                 (gdb) set language ada
                 (gdb) break ada_dll

5. Continue the program.

                 (gdb) cont

   This will run the program until it reaches the breakpoint that has been set. From that point you can use the standard way to debug a program as described in (see Running and Debugging Ada Programs).

It is also possible to debug the DLL by attaching to a running process.

Previous: Debugging the DLL Directly, Up: Program Built with Foreign Tools and DLL Built with GCC/GNAT

##### H.13.2.2 Attaching to a Running Process

With `GDB` it is always possible to debug a running process by attaching to it. It is possible to debug a DLL this way. The limitation of this approach is that the DLL must run long enough to perform the attach operation. It may be useful for instance to insert a time wasting loop in the code of the DLL to meet this criterion.

1. Launch the main program `main.exe`.

                 $ main

2. Use the Windows Task Manager to find the process ID. Let's say that the process PID for `main.exe` is 208.
3. Launch gdb.

                 $ gdb

4. Attach to the running process to be debugged.

                 (gdb) attach 208

5. Load the process debugging information.

                 (gdb) symbol-file main.exe

6. Break somewhere in the DLL.

                 (gdb) break ada_dll

7. Continue process execution.

                 (gdb) cont

This last step will resume the process execution, and stop at the breakpoint we have set. From there you can use the standard approach to debug a program as described in (see Running and Debugging Ada Programs).

Next: Setting Heap Size from gnatlink, Previous: Debugging a DLL, Up: Microsoft Windows Topics

### H.14 Setting Stack Size from `gnatlink`

It is possible to specify the program stack size at link time. On modern versions of Windows, starting with XP, this is mostly useful to set the size of the main stack (environment task). The other task stacks are set with pragma Storage_Size or with the `gnatbind -d` command.

Since older versions of Windows (2000, NT4, etc.) do not allow setting the reserve size of individual tasks, the link-time stack size applies to all tasks, and pragma Storage_Size has no effect. In particular, Stack Overflow checks are made against this link-time specified size.

This setting can be done with `gnatlink` using either:

- using `-Xlinker` linker option

                $ gnatlink hello -Xlinker --stack=0x10000,0x1000

  This sets the stack reserve size to 0x10000 bytes and the stack commit size to 0x1000 bytes.

- using `-Wl` linker option

                $ gnatlink hello -Wl,--stack=0x1000000

  This sets the stack reserve size to 0x1000000 bytes. Note that with `-Wl` option it is not possible to set the stack commit size because the coma is a separator for this option.

Previous: Setting Stack Size from gnatlink, Up: Microsoft Windows Topics

### H.15 Setting Heap Size from `gnatlink`

Under Windows systems, it is possible to specify the program heap size from `gnatlink` using either:

- using `-Xlinker` linker option

                $ gnatlink hello -Xlinker --heap=0x10000,0x1000

  This sets the heap reserve size to 0x10000 bytes and the heap commit size to 0x1000 bytes.

- using `-Wl` linker option

                $ gnatlink hello -Wl,--heap=0x1000000

  This sets the heap reserve size to 0x1000000 bytes. Note that with `-Wl` option it is not possible to set the heap commit size because the coma is a separator for this option.

Next: GNU Free Documentation License, Previous: Microsoft Windows Topics, Up: Top

## Appendix I Mac OS Topics

This chapter describes topics that are specific to Apple's OS X platform.

Up: Mac OS Topics

### I.1 Codesigning the Debugger

The Darwin Kernel requires the debugger to have special permissions before it is allowed to control other processes. These permissions are granted by codesigning the GDB executable. Without these permissions, the debugger will report error messages such as:

         Starting program: /x/y/foo
         Unable to find Mach task port for process-id 28885: (os/kern) failure (0x5).
          (please check gdb is codesigned - see taskgated(8))

Codesigning requires a certificate. The following procedure explains how to create one:

- Start the Keychain Access application (in /Applications/Utilities/Keychain Access.app)
- Select the Keychain Access -> Certificate Assistant -> Create a Certificate... menu
- Then:
  - Choose a name for the new certificate (this procedure will use "gdb-cert" as an example)
  - Set "Identity Type" to "Self Signed Root"
  - Set "Certificate Type" to "Code Signing"
  - Activate the "Let me override defaults" option
- Click several times on "Continue" until the "Specify a Location For The Certificate" screen appears, then set "Keychain" to "System"
- Click on "Continue" until the certificate is created
- Finally, in the view, double-click on the new certificate, and set "When using this certificate" to "Always Trust"
- Exit the Keychain Access application and restart the computer (this is unfortunately required)

Once a certificate has been created, the debugger can be codesigned as follow. In a Terminal, run the following command...

         codesign -f -s  "gdb-cert"  <gnat_install_prefix>/bin/gdb

... where "gdb-cert" should be replaced by the actual certificate name chosen above, and <gnat_install_prefix> should be replaced by the location where you installed GNAT.

Next: Index, Previous: Mac OS Topics, Up: Top

## GNU Free Documentation License

Version 1.3, 3 November 2008

         Copyright © 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
         http://fsf.org/

         Everyone is permitted to copy and distribute verbatim copies
         of this license document, but changing it is not allowed.

0. PREAMBLE

   The purpose of this License is to make a manual, textbook, or other functional and useful document free in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others.

   This License is a kind of “copyleft”, which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software.

   We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference.

1. APPLICABILITY AND DEFINITIONS

   This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. Such a notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under the conditions stated herein. The “Document”, below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as “you”. You accept the license if you copy, modify or distribute the work in a way requiring permission under copyright law.

   A “Modified Version” of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language.

   A “Secondary Section” is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document's overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (Thus, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them.

   The “Invariant Sections” are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. If a section does not fit the above definition of Secondary then it is not allowed to be designated as Invariant. The Document may contain zero Invariant Sections. If the Document does not identify any Invariant Sections then there are none.

   The “Cover Texts” are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words.

   A “Transparent” copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, that is suitable for revising the document straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent modification by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not “Transparent” is called “Opaque”.

   Examples of suitable formats for Transparent copies include plain ascii without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML, PostScript or PDF designed for human modification. Examples of transparent image formats include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML, PostScript or PDF produced by some word processors for output purposes only.

   The “Title Page” means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, “Title Page” means the text near the most prominent appearance of the work's title, preceding the beginning of the body of the text.

   The “publisher” means any person or entity that distributes copies of the Document to the public.

   A section “Entitled XYZ” means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another language. (Here XYZ stands for a specific section name mentioned below, such as “Acknowledgements”, “Dedications”, “Endorsements”, or “History”.) To “Preserve the Title” of such a section when you modify the Document means that it remains a section “Entitled XYZ” according to this definition.

   The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as regards disclaiming warranties: any other implication that these Warranty Disclaimers may have is void and has no effect on the meaning of this License.

2. VERBATIM COPYING

   You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3.

   You may also lend copies, under the same conditions stated above, and you may publicly display copies.

3. COPYING IN QUANTITY

   If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Document's license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects.

   If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages.

   If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a computer-network location from which the general network-using public has access to download using public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public.

   It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document.

4. MODIFICATIONS

   You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version:

   1. Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission.
   2. List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has fewer than five), unless they release you from this requirement.
   3. State on the Title page the name of the publisher of the Modified Version, as the publisher.
   4. Preserve all the copyright notices of the Document.
   5. Add an appropriate copyright notice for your modifications adjacent to the other copyright notices.
   6. Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below.
   7. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document's license notice.
   8. Include an unaltered copy of this License.
   9. Preserve the section Entitled “History”, Preserve its Title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section Entitled “History” in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence.
   10. Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the “History” section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission.
   11. For any section Entitled “Acknowledgements” or “Dedications”, Preserve the Title of the section, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein.
   12. Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles.
   13. Delete any section Entitled “Endorsements”. Such a section may not be included in the Modified Version.
   14. Do not retitle any existing section to be Entitled “Endorsements” or to conflict in title with any Invariant Section.
   15. Preserve any Warranty Disclaimers.

   If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version's license notice. These titles must be distinct from any other section titles.

   You may add a section Entitled “Endorsements”, provided it contains nothing but endorsements of your Modified Version by various parties—for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard.

   You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one.

   The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version.

5. COMBINING DOCUMENTS

   You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice, and that you preserve all their Warranty Disclaimers.

   The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work.

   In the combination, you must combine any sections Entitled “History” in the various original documents, forming one section Entitled “History”; likewise combine any sections Entitled “Acknowledgements”, and any sections Entitled “Dedications”. You must delete all sections Entitled “Endorsements.”

6. COLLECTIONS OF DOCUMENTS

   You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects.

   You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document.

7. AGGREGATION WITH INDEPENDENT WORKS

   A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, is called an “aggregate” if the copyright resulting from the compilation is not used to limit the legal rights of the compilation's users beyond what the individual works permit. When the Document is included in an aggregate, this License does not apply to the other works in the aggregate which are not themselves derivative works of the Document.

   If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one half of the entire aggregate, the Document's Cover Texts may be placed on covers that bracket the Document within the aggregate, or the electronic equivalent of covers if the Document is in electronic form. Otherwise they must appear on printed covers that bracket the whole aggregate.

8. TRANSLATION

   Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warranty Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail.

   If a section in the Document is Entitled “Acknowledgements”, “Dedications”, or “History”, the requirement (section 4) to Preserve its Title (section 1) will typically require changing the actual title.

9. TERMINATION

   You may not copy, modify, sublicense, or distribute the Document except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, or distribute it is void, and will automatically terminate your rights under this License.

   However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.

   Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.

   Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, receipt of a copy of some or all of the same material does not give you any rights to use it.

10. FUTURE REVISIONS OF THIS LICENSE

    The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See http://www.gnu.org/copyleft/.

    Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License “or any later version” applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation. If the Document specifies that a proxy can decide which future versions of this License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Document.

11. RELICENSING

    “Massive Multiauthor Collaboration Site” (or “MMC Site”) means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A “Massive Multiauthor Collaboration” (or “MMC”) contained in the site means any set of copyrightable works thus published on the MMC site.

    “CC-BY-SA” means the Creative Commons Attribution-Share Alike 3.0 license published by Creative Commons Corporation, a not-for-profit corporation with a principal place of business in San Francisco, California, as well as future copyleft versions of that license published by that same organization.

    “Incorporate” means to publish or republish a Document, in whole or in part, as part of another Document.

    An MMC is “eligible for relicensing” if it is licensed under this License, and if all works that were first published under this License somewhere other than this MMC, and subsequently incorporated in whole or in part into the MMC, (1) had no cover texts or invariant sections, and (2) were thus incorporated prior to November 1, 2008.

    The operator of an MMC Site may republish an MMC contained in the site under CC-BY-SA on the same site at any time before August 1, 2009, provided the MMC is eligible for relicensing.

### ADDENDUM: How to use this License for your documents

To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page:

           Copyright (C)  year  your name.
           Permission is granted to copy, distribute and/or modify this document
           under the terms of the GNU Free Documentation License, Version 1.3
           or any later version published by the Free Software Foundation;
           with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
           Texts.  A copy of the license is included in the section entitled ``GNU
           Free Documentation License''.

If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, replace the “with...Texts.” line with this:

             with the Invariant Sections being list their titles, with
             the Front-Cover Texts being list, and with the Back-Cover Texts
             being list.

If you have Invariant Sections without Cover Texts, or some other combination of the three, merge those two alternatives to suit the situation.

If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software.

Previous: GNU Free Documentation License, Up: Top

## Index

- `--additional-tests` (`gnattest`): Switches for gnattest
- `--as` (`dlltool`): Using dlltool
- `--base-file` (`dlltool`): Using dlltool
- `--call_threshold` (`gnatpp`): Other Formatting Options
- `--control-couplingx` (`gnatmetric`): Coupling Metrics Control
- `--def` (`dlltool`): Using dlltool
- `--demangle` (`gprof`): Running gprof
- `--dllname` (`dlltool`): Using dlltool
- `--eol` (`gnatpp`): Output File Control
- `--ext` (`gnatfind`): Switches for gnatfind
- `--ext` (`gnatxref`): Switches for gnatxref
- `--GCC=` (`gnatchop`): Switches for gnatchop
- `--GCC=compiler_name` (`gnatlink`): Switches for gnatlink
- `--GCC=compiler_name` (`gnatmake`): Switches for gnatmake
- `--GNATBIND=binder_name` (`gnatmake`): Switches for gnatmake
- `--GNATLINK=linker_name` (`gnatmake`): Switches for gnatmake
- `--harness-dir` (`gnattest`): Switches for gnattest
- `--harness-only` (`gnattest`): Switches for gnattest
- `--header-file` (`gnatstub`): Switches for gnatstub
- `--help` (`dlltool`): Using dlltool
- `--help` `gnatbind`: Switches for gnatbind
- `--help` `gnatchop`: Switches for gnatchop
- `--help` `gnatclean`: Switches for gnatclean
- `--help` `gnatfind`: Switches for gnatfind
- `--help` `gnatlink`: Switches for gnatlink
- `--help` `gnatls`: Switches for gnatls
- `--help` `gnatmake`: Switches for gnatmake
- `--help` `gnatname`: Switches for gnatname
- `--help` `gnatxref`: Switches for gnatxref
- `--hierarchy-couplingx` (`gnatmetric`): Coupling Metrics Control
- `--ignore` (`gnatelim`): Running gnatelim
- `--linesx` (`gnatmetric`): Line Metrics Control
- `--LINK=` (`gnatlink`): Switches for gnatlink
- `--no-complexityx`: Complexity Metrics Control
- `--no-elim-dispatch` (`gnatelim`): Running gnatelim
- `--no-exception` (`gnatstub`): Switches for gnatstub
- `--no-linesx`: Line Metrics Control
- `--no-local-header` (`gnatstub`): Switches for gnatstub
- `--no-separate-is` (`gnatpp`): Construct Layout Control
- `--no-separate-loop-then` (`gnatpp`): Construct Layout Control
- `--no-static-loop` (`gnatmetric`): Complexity Metrics Control
- `--no-syntaxx` (`gnatmetric`): Syntax Metrics Control
- `--output-exp` (`dlltool`): Using dlltool
- `--output-lib` (`dlltool`): Using dlltool
- `--par_threshold` (`gnatpp`): Other Formatting Options
- `--RTS` (`gcc`): Switches for gcc
- `--RTS` (`gnatbind`): Switches for gnatbind
- `--RTS` (`gnatfind`): Switches for gnatfind
- `--RTS` (`gnatls`): Switches for gnatls
- `--RTS` (`gnatmake`): Switches for gnatmake
- `--RTS` (`gnatpp`): Setting the Source Search Path
- `--RTS` (`gnatxref`): Switches for gnatxref
- `--RTS` option: Specifying a Run-Time Library
- `--RTS=sjlj` (`gnatmake`): Exception Handling Control
- `--RTS=zcx` (`gnatmake`): Exception Handling Control
- `--separate-label` (`gnatpp`): Construct Layout Control
- `--separate-loop-then` (`gnatpp`): Construct Layout Control
- `--separate-stmt-name` (`gnatpp`): Construct Layout Control
- `--separates` (`gnattest`): Switches for gnattest
- `--skeleton-default` (`gnattest`): Switches for gnattest
- `--subdir` (`gnattest`): Switches for gnattest
- `--subdirs=` (gnatmake and gnatclean): Switches Related to Project Files
- `--syntaxx` (`gnatmetric`): Syntax Metrics Control
- `--tagged-couplingx` (`gnatmetric`): Coupling Metrics Control
- `--tests-dir` (`gnattest`): Switches for gnattest
- `--tests-root` (`gnattest`): Switches for gnattest
- `--transition` (`gnattest`): Switches for gnattest
- `--unit-couplingx` (`gnatmetric`): Coupling Metrics Control
- `--use-on-new-line` (`gnatpp`): Construct Layout Control
- `--validate-type-extensions` (`gnattest`): Switches for gnattest
- `--version` `gnatbind`: Switches for gnatbind
- `--version` `gnatchop`: Switches for gnatchop
- `--version` `gnatclean`: Switches for gnatclean
- `--version` `gnatfind`: Switches for gnatfind
- `--version` `gnatlink`: Switches for gnatlink
- `--version` `gnatls`: Switches for gnatls
- `--version` `gnatmake`: Switches for gnatmake
- `--version` `gnatname`: Switches for gnatname
- `--version` `gnatxref`: Switches for gnatxref
- `-83` (`gnathtml`): Converting Ada Files to html with gnathtml
- `-A` (`gnatbind`): Switches for gnatbind
- `-a` (`gnatdll`): Using gnatdll
- `-a` (`gnatfind`): Switches for gnatfind
- `-a` (`gnatls`): Switches for gnatls
- `-A` (`gnatmake`): Switches for gnatmake
- `-a` (`gnatmake`): Switches for gnatmake
- `-a` (`gnatxref`): Switches for gnatxref
- `-a` `gnatbind`: Switches for gnatbind
- `-aI` (`gnatbind`): Search Paths for gnatbind
- `-aI` (`gnatbind`): Switches for gnatbind
- `-aI` (`gnatls`): Switches for gnatls
- `-aI` (`gnatmake`): Switches for gnatmake
- `-aIDIR` (`gnatfind`): Switches for gnatfind
- `-aIDIR` (`gnatxref`): Switches for gnatxref
- `-aL` (`gnatmake`): Switches for gnatmake
- `-An` (`gnatpp`): Alignment Control
- `-aO` (`gnatbind`): Search Paths for gnatbind
- `-aO` (`gnatbind`): Switches for gnatbind
- `-aO` (`gnatclean`): Switches for gnatclean
- `-aO` (`gnatls`): Switches for gnatls
- `-aO` (`gnatmake`): Switches for gnatmake
- `-aODIR` (`gnatfind`): Switches for gnatfind
- `-aODIR` (`gnatxref`): Switches for gnatxref
- `-aP` (any project-aware tool): Switches Related to Project Files
- `-ax` (`gnatpp`): Casing Control
- `-B` (`gcc`): Switches for gcc
- `-b` (`gcc`): Switches for gcc
- `-b` (`gnatbind`): Binder Error Message Control
- `-b` (`gnatbind`): Switches for gnatbind
- `-b` (`gnatdll`): Using gnatdll
- `-B` (`gnatlink`): Switches for gnatlink
- `-b` (`gnatlink`): Switches for gnatlink
- `-b` (`gnatmake`): Switches for gnatmake
- `-b` (`gnatmem`): Switches for gnatmem
- `-b` (`gnatprep`): Switches for gnatprep
- `-bargs` (`gnatdll`): Using gnatdll
- `-bargs` (`gnatmake`): Mode Switches for gnatmake
- `-C` (`gcc`): Switches
- `-c` (`gcc`): Switches for gcc
- `-c` (`gnatbind`): Output Control
- `-c` (`gnatbind`): Switches for gnatbind
- `-c` (`gnatchop`): Switches for gnatchop
- `-c` (`gnatclean`): Switches for gnatclean
- `-C` (`gnatmake`): Switches for gnatmake
- `-c` (`gnatmake`): Switches for gnatmake
- `-c` (`gnatname`): Switches for gnatname
- `-C` (`gnatprep`): Switches for gnatprep
- `-c` (`gnatprep`): Switches for gnatprep
- `-C=` (`gnatmake`): Switches for gnatmake
- `-cargs` (`gnatmake`): Mode Switches for gnatmake
- `-cc` (`gnathtml`): Converting Ada Files to html with gnathtml
- `-cl` (`gnatpp`): General Text Layout Control
- `-cn` (`gnatpp`): Construct Layout Control
- `-complexityx` (`gnatmetric`): Complexity Metrics Control
- -coverage: Code Coverage of Ada Programs using gcov
- `-D` (`gnatbind`): Switches for gnatbind
- `-D` (`gnatclean`): Switches for gnatclean
- `-d` (`gnatdll`): Using gnatdll
- `-d` (`gnatfind`): Switches for gnatfind
- `-D` (`gnathtml`): Converting Ada Files to html with gnathtml
- `-d` (`gnathtml`): Converting Ada Files to html with gnathtml
- `-d` (`gnatls`): Switches for gnatls
- `-D` (`gnatmake`): Switches for gnatmake
- `-d` (`gnatmake`): Switches for gnatmake
- `-d` (`gnatmetric`): Output Files Control
- `-D` (`gnatname`): Switches for gnatname
- `-d` (`gnatname`): Switches for gnatname
- `-D` (`gnatpp`): Casing Control
- `-D` (`gnatprep`): Switches for gnatprep
- `-d` (`gnatxref`): Switches for gnatxref
- `-D-` (`gnatpp`): Casing Control
- `-dnn[k|m]` (`gnatbind`): Switches for gnatbind
- `-e` (`gnatbind`): Output Control
- `-E` (`gnatbind`): Switches for gnatbind
- `-e` (`gnatbind`): Switches for gnatbind
- `-e` (`gnatdll`): Using gnatdll
- `-e` (`gnatfind`): Switches for gnatfind
- `-e` (`gnatpp`): Other Formatting Options
- `-E` (`gprof`): Running gprof
- `-e` (`gprof`): Running gprof
- `-eI` (`gnatmake`): Switches for gnatmake
- `-eL` (any project-aware tool): Switches Related to Project Files
- `-eL` (`gnatmake`): Switches for gnatmake
- `-eS` (`gnatmake`): Switches for gnatmake
- `-ext` (`gnathtml`): Converting Ada Files to html with gnathtml
- `-F` (`gnatbind`): Switches for gnatbind
- `-F` (`gnatclean`): Switches for gnatclean
- `-f` (`gnatfind`): Switches for gnatfind
- `-f` (`gnathtml`): Converting Ada Files to html with gnathtml
- `-f` (`gnatlink`): Switches for gnatlink
- `-F` (`gnatmake`): Switches for gnatmake
- `-f` (`gnatmake`): Switches for gnatmake
- `-f` (`gnatname`): Switches for gnatname
- `-f` (`gnatstub`): Switches for gnatstub
- `-f` (`gnatxref`): Switches for gnatxref
- `-F` (`gprof`): Running gprof
- `-f` (`gprof`): Running gprof
- -fada-spec-parent (`gcc`): Switches
- `-fcallgraph-info` (`gcc`): Switches for gcc
- `-fdata-sections` (`gcc`): Compilation options
- `-fdump-ada-spec` (`gcc`): Switches
- `-fdump-ada-spec-slim` (`gcc`): Switches
- `-fdump-scos` (`gcc`): Switches for gcc
- `-ff` (`gnatpp`): Other Formatting Options
- `-ffunction-sections` (`gcc`): Compilation options
- `-files` (`gnatelim`): Running gnatelim
- `-files` (`gnatls`): Switches for gnatls
- `-files` (`gnatmetric`): Other gnatmetric Switches
- `-files` (`gnatpp`): Other gnatpp Switches
- `-flto` (`gcc`): Switches for gcc
- `-fno-inline` (`gcc`): Inlining of Subprograms
- `-fno-inline` (`gcc`): Switches for gcc
- `-fno-inline-functions` (`gcc`): Inlining of Subprograms
- `-fno-inline-functions` (`gcc`): Switches for gcc
- `-fno-inline-functions-called-once` (`gcc`): Inlining of Subprograms
- `-fno-inline-functions-called-once` (`gcc`): Switches for gcc
- `-fno-inline-small-functions` (`gcc`): Inlining of Subprograms
- `-fno-inline-small-functions` (`gcc`): Switches for gcc
- `-fno-ivopts` (`gcc`): Switches for gcc
- `-fno-strict-aliasing` (`gcc`): Switches for gcc
- -fprofile-arcs: Code Coverage of Ada Programs using gcov
- -fstack-check: Stack Overflow Checking
- `-fstack-check` (`gcc`): Run-Time Checks
- `-fstack-check` (`gcc`): Switches for gcc
- -fstack-usage: Static Stack Usage Analysis
- `-fstack-usage` (`gcc`): Switches for gcc
- -ftest-coverage: Code Coverage of Ada Programs using gcov
- `-fverbose-asm` (`gcc`): Switches for gcc
- `-g` (`gcc`): Debugging Optimized Code
- `-g` (`gcc`): Switches for gcc
- `-g` (`gnatdll`): Using gnatdll
- `-g` (`gnatfind`): Switches for gnatfind
- `-g` (`gnatlink`): Switches for gnatlink
- `-g` (`gnatmake`): Switches for gnatmake
- `-g` (`gnatxref`): Switches for gnatxref
- `-gnat-p` (`gcc`): Run-Time Checks
- `-gnat-p` (`gcc`): Switches for gcc
- `-gnat05` (`gcc`): Compiling Different Versions of Ada
- `-gnat05` (`gcc`): Switches for gcc
- `-gnat12` (`gcc`): Compiling Different Versions of Ada
- `-gnat12` (`gcc`): Switches for gcc
- `-gnat2005` (`gcc`): Compiling Different Versions of Ada
- `-gnat2005` (`gcc`): Switches for gcc
- `-gnat2012` (`gcc`): Compiling Different Versions of Ada
- `-gnat2012` (`gcc`): Switches for gcc
- `-gnat83` (`gcc`): Compiling Different Versions of Ada
- `-gnat83` (`gcc`): Switches for gcc
- `-gnat95` (`gcc`): Compiling Different Versions of Ada
- `-gnat95` (`gcc`): Switches for gcc
- `-gnata` (`gcc`): Debugging and Assertion Control
- `-gnatA` (`gcc`): Switches for gcc
- `-gnata` (`gcc`): Switches for gcc
- `-gnata` switch: Debugging - A Special Case
- `-gnatb` (`gcc`): Output and Error Message Control
- `-gnatB` (`gcc`): Switches for gcc
- `-gnatb` (`gcc`): Switches for gcc
- `-gnatc` (`gcc`): Using gcc for Semantic Checking
- `-gnatC` (`gcc`): Switches for gcc
- `-gnatc` (`gcc`): Switches for gcc
- `-gnatD` (`gcc`): Debugging Control
- `-gnatd` (`gcc`): Debugging Control
- `-gnatd` (`gcc`): Switches for gcc
- `-gnatD[nn]` (`gcc`): Switches for gcc
- `-gnatdc` switch: GNAT Abnormal Termination or Failure to Terminate
- `-gnatE` (`gcc`): Run-Time Checks
- `-gnatE` (`gcc`): Switches for gcc
- `-gnateA` (`gcc`): Switches for gcc
- `-gnatec` (`gcc`): Switches for gcc
- `-gnatec` (`gnatpp`): Setting the Source Search Path
- `-gnatec` (`gnatstub`): Switches for gnatstub
- `-gnateD` (`gcc`): Integrated Preprocessing
- `-gnateD` (`gcc`): Switches for gcc
- `-gnated` (`gcc`): Switches for gcc
- `-gnateE` (`gcc`): Switches for gcc
- `-gnateF` (`gcc`): Switches for gcc
- `-gnatef` (`gcc`): Switches for gcc
- `-gnateG` (`gcc`): Switches for gcc
- `-gnateI` (`gcc`): Switches for gcc
- `-gnatei` (`gcc`): Switches for gcc
- `-gnatem` (`gcc`): Units to Sources Mapping Files
- `-gnatem` (`gcc`): Switches for gcc
- `-gnatep` (`gcc`): Integrated Preprocessing
- `-gnateP` (`gcc`): Switches for gcc
- `-gnatep` (`gcc`): Switches for gcc
- `-gnateS` (`gcc`): Switches for gcc
- `-gnatet` (`gcc`): Switches for gcc
- `-gnateV` (`gcc`): Switches for gcc
- `-gnateY` (`gcc`): Switches for gcc
- `-gnatf` (`gcc`): Output and Error Message Control
- `-gnatF` (`gcc`): Switches for gcc
- `-gnatf` (`gcc`): Switches for gcc
- `-gnatG` (`gcc`): Debugging Control
- `-gnatg` (`gcc`): Switches for gcc
- `-gnatG[nn]` (`gcc`): Switches for gcc
- `-gnath` (`gcc`): Switches for gcc
- `-gnati` (`gcc`): Character Set Control
- `-gnatI` (`gcc`): Switches for gcc
- `-gnati` (`gcc`): Switches for gcc
- `-gnatjnn` (`gcc`): Output and Error Message Control
- `-gnatjnn` (`gcc`): Switches for gcc
- `-gnatk` (`gcc`): File Naming Control
- `-gnatk` (`gcc`): Switches for gcc
- `-gnatL` (`gcc`): Debugging Control
- `-gnatl` (`gcc`): Output and Error Message Control
- `-gnatL` (`gcc`): Switches for gcc
- `-gnatl` (`gcc`): Switches for gcc
- `-gnatl=fname` (`gcc`): Output and Error Message Control
- `-gnatm` (`gcc`): Output and Error Message Control
- `-gnatm` (`gcc`): Switches for gcc
- `-gnatN` (`gcc`): Subprogram Inlining Control
- `-gnatn` (`gcc`): Subprogram Inlining Control
- `-gnatN` (`gcc`): Switches for gcc
- `-gnatn` (`gcc`): Switches for gcc
- `-gnatN` switch: Source Dependencies
- `-gnatn` switch: Source Dependencies
- `-gnato` (gcc): Default Settings
- `-gnato` (`gcc`): Controlling Run-Time Checks
- `-gnato` (`gnatstub`): Switches for gnatstub
- `-gnato?` (gcc): Specifying the Desired Mode
- `-gnato??` (gcc): Specifying the Desired Mode
- `-gnato??` (`gcc`): Run-Time Checks
- `-gnato??` (`gcc`): Switches for gcc
- `-gnatp` (`gcc`): Controlling Run-Time Checks
- `-gnatp` (`gcc`): Run-Time Checks
- `-gnatP` (`gcc`): Switches for gcc
- `-gnatp` (`gcc`): Switches for gcc
- `-gnatQ` (`gcc`): Output and Error Message Control
- `-gnatq` (`gcc`): Output and Error Message Control
- `-gnatQ` (`gcc`): Switches for gcc
- `-gnatq` (`gcc`): Switches for gcc
- `-gnatR` (`gcc`): Debugging Control
- `-gnatr` (`gcc`): Debugging Control
- `-gnatR` (`gcc`): Switches for gcc
- `-gnatr` (`gcc`): Switches for gcc
- `-gnatS` (`gcc`): Debugging Control
- `-gnats` (`gcc`): Using gcc for Syntax Checking
- `-gnatS` (`gcc`): Switches for gcc
- `-gnats` (`gcc`): Switches for gcc
- `-gnatt` (`gcc`): Auxiliary Output Control
- `-gnatT` (`gcc`): Switches for gcc
- `-gnatt` (`gcc`): Switches for gcc
- `-gnatu` (`gcc`): Auxiliary Output Control
- `-gnatU` (`gcc`): Output and Error Message Control
- `-gnatU` (`gcc`): Switches for gcc
- `-gnatu` (`gcc`): Switches for gcc
- `-gnatv` (`gcc`): Output and Error Message Control
- `-gnatV` (`gcc`): Switches for gcc
- `-gnatv` (`gcc`): Switches for gcc
- `-gnatVa` (`gcc`): Validity Checking
- `-gnatVc` (`gcc`): Validity Checking
- `-gnatVd` (`gcc`): Validity Checking
- `-gnatVe` (`gcc`): Validity Checking
- `-gnatVf` (`gcc`): Validity Checking
- `-gnatVi` (`gcc`): Validity Checking
- `-gnatVm` (`gcc`): Validity Checking
- `-gnatVn` (`gcc`): Validity Checking
- `-gnatVo` (`gcc`): Validity Checking
- `-gnatVp` (`gcc`): Validity Checking
- `-gnatVr` (`gcc`): Validity Checking
- `-gnatVs` (`gcc`): Validity Checking
- `-gnatVt` (`gcc`): Validity Checking
- `-gnatW` (`gcc`): Character Set Control
- `-gnatW` (`gcc`): Switches for gcc
- `-gnatw` (`gcc`): Switches for gcc
- `-gnatw.A` (`gcc`): Warning Message Control
- `-gnatw.a` (`gcc`): Warning Message Control
- `-gnatw.b` (`gcc`): Warning Message Control
- `-gnatw.c` (`gcc`): Warning Message Control
- `-gnatw.d` (`gcc`): Warning Message Control
- `-gnatw.e` (`gcc`): Warning Message Control
- `-gnatw.H` (`gcc`): Warning Message Control
- `-gnatw.h` (`gcc`): Warning Message Control
- `-gnatw.I` (`gcc`): Warning Message Control
- `-gnatw.i` (`gcc`): Warning Message Control
- `-gnatw.k` (`gcc`): Warning Message Control
- `-gnatw.L` (`gcc`): Warning Message Control
- `-gnatw.l` (`gcc`): Warning Message Control
- `-gnatw.M` (`gcc`): Warning Message Control
- `-gnatw.m` (`gcc`): Warning Message Control
- `-gnatw.O` (`gcc`): Warning Message Control
- `-gnatw.o` (`gcc`): Warning Message Control
- `-gnatw.P` (`gcc`): Warning Message Control
- `-gnatw.p` (`gcc`): Warning Message Control
- `-gnatw.r` (`gcc`): Warning Message Control
- `-gnatw.S` (`gcc`): Warning Message Control
- `-gnatw.s` (`gcc`): Warning Message Control
- `-gnatw.T` (`gcc`): Warning Message Control
- `-gnatw.t` (`gcc`): Warning Message Control
- `-gnatw.U` (`gcc`): Warning Message Control
- `-gnatw.u` (`gcc`): Warning Message Control
- `-gnatw.V` (`gcc`): Warning Message Control
- `-gnatw.v` (`gcc`): Warning Message Control
- `-gnatw.W` (`gcc`): Warning Message Control
- `-gnatw.w` (`gcc`): Warning Message Control
- `-gnatwA` (`gcc`): Warning Message Control
- `-gnatwa` (`gcc`): Warning Message Control
- `-gnatwB` (`gcc`): Warning Message Control
- `-gnatwb` (`gcc`): Warning Message Control
- `-gnatwC` (`gcc`): Warning Message Control
- `-gnatwc` (`gcc`): Warning Message Control
- `-gnatwD` (`gcc`): Warning Message Control
- `-gnatwd` (`gcc`): Warning Message Control
- `-gnatwe` (`gcc`): Warning Message Control
- `-gnatwF` (`gcc`): Warning Message Control
- `-gnatwf` (`gcc`): Warning Message Control
- `-gnatwG` (`gcc`): Warning Message Control
- `-gnatwg` (`gcc`): Warning Message Control
- `-gnatwH` (`gcc`): Warning Message Control
- `-gnatwh` (`gcc`): Warning Message Control
- `-gnatwI` (`gcc`): Warning Message Control
- `-gnatwi` (`gcc`): Warning Message Control
- `-gnatwJ` (`gcc`): Warning Message Control
- `-gnatwj` (`gcc`): Warning Message Control
- `-gnatwK` (`gcc`): Warning Message Control
- `-gnatwk` (`gcc`): Warning Message Control
- `-gnatwL` (`gcc`): Warning Message Control
- `-gnatwl` (`gcc`): Warning Message Control
- `-gnatwm` (`gcc`): Warning Message Control
- `-gnatwM` (`gcc`): Warning Message Control
- `-gnatwm` (`gcc`): Warning Message Control
- `-gnatwn` (`gcc`): Warning Message Control
- `-gnatwO` (`gcc`): Warning Message Control
- `-gnatwo` (`gcc`): Warning Message Control
- `-gnatwP` (`gcc`): Warning Message Control
- `-gnatwp` (`gcc`): Warning Message Control
- `-gnatwQ` (`gcc`): Warning Message Control
- `-gnatwq` (`gcc`): Warning Message Control
- `-gnatwR` (`gcc`): Warning Message Control
- `-gnatwr` (`gcc`): Warning Message Control
- `-gnatws` (`gcc`): Warning Message Control
- `-gnatwT` (`gcc`): Warning Message Control
- `-gnatwt` (`gcc`): Warning Message Control
- `-gnatwT` (`gcc`): Warning Message Control
- `-gnatwU` (`gcc`): Warning Message Control
- `-gnatwu` (`gcc`): Warning Message Control
- `-gnatwV` (`gcc`): Warning Message Control
- `-gnatwv` (`gcc`): Warning Message Control
- `-gnatwW` (`gcc`): Warning Message Control
- `-gnatww` (`gcc`): Warning Message Control
- `-gnatwX` (`gcc`): Warning Message Control
- `-gnatwx` (`gcc`): Warning Message Control
- `-gnatwY` (`gcc`): Warning Message Control
- `-gnatwy` (`gcc`): Warning Message Control
- `-gnatwZ` (`gcc`): Warning Message Control
- `-gnatwz` (`gcc`): Warning Message Control
- `-gnatx` (`gcc`): Debugging Control
- `-gnatX` (`gcc`): Compiling Different Versions of Ada
- `-gnatX` (`gcc`): Switches for gcc
- `-gnatx` (`gcc`): Switches for gcc
- `-gnaty` (`gcc`): Style Checking
- `-gnaty` (`gcc`): Switches for gcc
- `-gnaty` (`gnatstub`): Switches for gnatstub
- `-gnatyM` (`gnatstub`): Switches for gnatstub
- `-gnatz` (`gcc`): Switches for gcc
- `-h` (`gnatbind`): Output Control
- `-h` (`gnatbind`): Switches for gnatbind
- `-h` (`gnatclean`): Switches for gnatclean
- `-h` (`gnatdll`): Using gnatdll
- `-h` (`gnatls`): Switches for gnatls
- `-h` (`gnatname`): Switches for gnatname
- `-H32` (`gnatbind`): Switches for gnatbind
- `-H64` (`gnatbind`): Switches for gnatbind
- `-hg` (`gnatstub`): Switches for gnatstub
- `-hs` (`gnatstub`): Switches for gnatstub
- `-I` (`gcc`): Switches for gcc
- `-I` (`gnatbind`): Search Paths for gnatbind
- `-I` (`gnatbind`): Switches for gnatbind
- `-I` (`gnatclean`): Switches for gnatclean
- `-I` (`gnatdll`): Using gnatdll
- `-I` (`gnathtml`): Converting Ada Files to html with gnathtml
- `-I` (`gnatls`): Switches for gnatls
- `-I` (`gnatmake`): Switches for gnatmake
- `-i` (`gnatmake`): Switches for gnatmake
- `-i` (`gnatmem`): Switches for gnatmem
- `-I` (`gnatpp`): Setting the Source Search Path
- `-i` (`gnatpp`): General Text Layout Control
- `-i` (`gnatstub`): Switches for gnatstub
- `-I-` (`gcc`): Switches for gcc
- `-I-` (`gnatbind`): Switches for gnatbind
- `-I-` (`gnatclean`): Switches for gnatclean
- `-I-` (`gnatls`): Switches for gnatls
- `-I-` (`gnatmake`): Switches for gnatmake
- `-I-` (`gnatpp`): Setting the Source Search Path
- `-I-` (`gnatstub`): Switches for gnatstub
- `-IDIR` (`gnatfind`): Switches for gnatfind
- `-IDIR` (`gnatstub`): Switches for gnatstub
- `-IDIR` (`gnatxref`): Switches for gnatxref
- `-j` (`gnatmake`): Switches for gnatmake
- `-k` (`dlltool`): Using dlltool
- `-K` (`gnatbind`): Output Control
- `-k` (`gnatchop`): Switches for gnatchop
- `-k` (`gnatdll`): Using gnatdll
- `-k` (`gnatmake`): Switches for gnatmake
- `-k` (`gnatstub`): Switches for gnatstub
- `-kx` (`gnatpp`): Casing Control
- `-l` (`gnatbind`): Output Control
- `-L` (`gnatbind`): Switches for gnatbind
- `-l` (`gnatbind`): Switches for gnatbind
- `-l` (`gnatdll`): Using gnatdll
- `-l` (`gnathtml`): Converting Ada Files to html with gnathtml
- `-L` (`gnatmake`): Switches for gnatmake
- `-l` (`gnatmake`): Switches for gnatmake
- `-l` (`gnatstub`): Switches for gnatstub
- `-largs` (`gnatdll`): Using gnatdll
- `-largs` (`gnatmake`): Mode Switches for gnatmake
- `-ln` (`gnatpp`): Construct Layout Control
- `-log` (`gnatelim`): Running gnatelim
- `-M` (`gnatbind`): Binder Error Message Control
- `-m` (`gnatbind`): Binder Error Message Control
- `-m` (`gnatbind`): Switches for gnatbind
- `-M` (`gnatbind`): Switches for gnatbind
- `-M` (`gnatmake`): Switches for gnatmake
- `-m` (`gnatmake`): Switches for gnatmake
- `-m` (`gnatmem`): Switches for gnatmem
- `-M` (`gnatpp`): General Text Layout Control
- `-margs` (`gnatmake`): Mode Switches for gnatmake
- `-mbig-switch` (`gcc`): Switches for gcc
- -mwindows: CONSOLE and WINDOWS subsystems
- `-n` (`gnatbind`): Binding with Non-Ada Main Programs
- `-n` (`gnatbind`): Switches for gnatbind
- `-n` (`gnatclean`): Switches for gnatclean
- `-n` (`gnatdll`): Using gnatdll
- `-n` (`gnatlink`): Switches for gnatlink
- `-n` (`gnatmake`): Switches for gnatmake
- `-N` (`gnatpp`): Construct Layout Control
- `-ne` (`gnatmetric`): Complexity Metrics Control
- `-nex` (`gnatpp`): Casing Control
- `-nostdinc` (`gcc`): Switches for gcc
- `-nostdinc` (`gnatbind`): Switches for gnatbind
- `-nostdinc` (`gnatfind`): Switches for gnatfind
- `-nostdinc` (`gnatmake`): Switches for gnatmake
- `-nostdinc` (`gnatxref`): Switches for gnatxref
- `-nostdlib` (`gcc`): Switches for gcc
- `-nostdlib` (`gnatbind`): Switches for gnatbind
- `-nostdlib` (`gnatfind`): Switches for gnatfind
- `-nostdlib` (`gnatmake`): Switches for gnatmake
- `-nostdlib` (`gnatxref`): Switches for gnatxref
- `-nt` (`gnatmetric`): Output Files Control
- `-ntx` (`gnatpp`): Casing Control
- `-nx` (`gnatmetric`): Disable Metrics For Local Units
- `-nx` (`gnatpp`): Casing Control
- `-o` (`gnatbind`): Switches for gnatbind
- `-O` (`gcc`): Optimization Levels
- `-O` (`gcc`): Switches for gcc
- `-o` (`gcc`): Switches for gcc
- `-o` (`gnatbind`): Binding with Non-Ada Main Programs
- `-o` (`gnatbind`): Output Control
- `-O` (`gnatbind`): Output Control
- `-O` (`gnatbind`): Switches for gnatbind
- `-o` (`gnatelim`): Running gnatelim
- `-o` (`gnathtml`): Converting Ada Files to html with gnathtml
- `-o` (`gnatlink`): Switches for gnatlink
- `-o` (`gnatls`): Switches for gnatls
- `-o` (`gnatmake`): Switches for gnatmake
- `-o` (`gnatmetric`): Output Files Control
- `-o` (`gnatpp`): Output File Control
- `-o` (`gnatstub`): Switches for gnatstub
- `-of` (`gnatpp`): Output File Control
- `-og` (`gnatmetric`): Output Files Control
- `-ox` (`gnatmetric`): Output Files Control
- `-P` (any project-aware tool): Switches Related to Project Files
- `-p` (`gnatbind`): Elaboration Control
- `-P` (`gnatbind`): Switches for gnatbind
- `-p` (`gnatbind`): Switches for gnatbind
- `-p` (`gnatchop`): Switches for gnatchop
- `-P` (`gnatclean`): Switches for gnatclean
- `-p` (`gnathtml`): Converting Ada Files to html with gnathtml
- `-P` (`gnatmake`): Switches for gnatmake
- `-p` (`gnatmake`): Switches for gnatmake
- `-P` (`gnatname`): Switches for gnatname
- `-pass-exit-codes` (`gcc`): Auxiliary Output Control
- `-pass-exit-codes` (`gcc`): Switches for gcc
- `-pFILE` (`gnatfind`): Switches for gnatfind
- `-pFILE` (`gnatxref`): Switches for gnatxref
- -pg: Compilation for profiling
- -pg: Profiling an Ada Program using gprof
- `-pipe` (`gnatpp`): Output File Control
- `-px` (`gnatpp`): Casing Control
- `-q` (`gnatchop`): Switches for gnatchop
- `-q` (`gnatclean`): Switches for gnatclean
- `-q` (`gnatdll`): Using gnatdll
- `-q` (`gnatelim`): Running gnatelim
- `-q` (`gnatmake`): Switches for gnatmake
- `-q` (`gnatmem`): Switches for gnatmem
- `-q` (`gnatmetric`): Other gnatmetric Switches
- `-q` (`gnatstub`): Switches for gnatstub
- `-q` (`gnattest`): Switches for gnattest
- `-r` (`gnatbind`): Output Control
- `-R` (`gnatbind`): Switches for gnatbind
- `-r` (`gnatchop`): Switches for gnatchop
- `-r` (`gnatclean`): Switches for gnatclean
- `-r` (`gnatfind`): Switches for gnatfind
- `-r` (`gnatpp`): Output File Control
- `-r` (`gnatprep`): Switches for gnatprep
- `-r` (`gnatstub`): Switches for gnatstub
- `-r` (`gnattest`): Switches for gnattest
- `-rf` (`gnatpp`): Output File Control
- `-rnb` (`gnatpp`): Output File Control
- `-S` (`gcc`): Switches for gcc
- `-s` (`gnatbind`): Consistency-Checking Modes
- `-S` (`gnatbind`): Switches for gnatbind
- `-s` (`gnatbind`): Switches for gnatbind
- `-s` (`gnatfind`): Switches for gnatfind
- `-s` (`gnatls`): Switches for gnatls
- `-s` (`gnatmake`): Switches for gnatmake
- `-s` (`gnatmem`): Switches for gnatmem
- `-s` (`gnatprep`): Switches for gnatprep
- `-sc` (`gnathtml`): Converting Ada Files to html with gnathtml
- `-sfn` (`gnatmetric`): Output Files Control
- `-shared` (`gnatbind`): Switches for gnatbind
- `-static` (`gnatbind`): Switches for gnatbind
- `-t` (`gnatbind`): Binder Error Message Control
- `-T` (`gnatbind`): Switches for gnatbind
- `-t` (`gnatbind`): Switches for gnatbind
- `-t` (`gnatelim`): Running gnatelim
- `-t` (`gnatfind`): Switches for gnatfind
- `-t` (`gnathtml`): Converting Ada Files to html with gnathtml
- `-T` (`gnatpp`): Other Formatting Options
- `-t` (`gnatstub`): Switches for gnatstub
- `-T0` option: HP-UX-Specific Considerations
- `-T0` option: Choosing the Scheduling Policy
- `-u` (`gnatbind`): Switches for gnatbind
- `-u` (`gnatls`): Switches for gnatls
- `-U` (`gnatmake`): Switches for gnatmake
- `-u` (`gnatmake`): Switches for gnatmake
- `-u` (`gnatprep`): Switches for gnatprep
- `-v` (`dlltool`): Using dlltool
- `-V` (`gcc`): Switches for gcc
- `-v` (`gcc`): Switches for gcc
- `-v` (`gnatbind`): Binder Error Message Control
- `-v` (`gnatbind`): Switches for gnatbind
- `-v` (`gnatchop`): Switches for gnatchop
- `-v` (`gnatclean`): Switches for gnatclean
- `-v` (`gnatdll`): Using gnatdll
- `-v` (`gnatelim`): Running gnatelim
- `-v` (`gnatlink`): Switches for gnatlink
- `-v` (`gnatls`): Switches for gnatls
- `-v` (`gnatmake`): Switches for gnatmake
- `-v` (`gnatmetric`): Other gnatmetric Switches
- `-v` (`gnatname`): Switches for gnatname
- `-v` (`gnatpp`): Other gnatpp Switches
- `-v` (`gnatstub`): Switches for gnatstub
- `-v` (`gnattest`): Switches for gnattest
- `-v -v` (`gnatlink`): Switches for gnatlink
- `-v -v` (`gnatname`): Switches for gnatname
- `-v` option (for GPRbuild): Compiling with Project Files
- `-vl` (`gnatmake`): Switches for gnatmake
- `-vm` (`gnatmake`): Switches for gnatmake
- `-vP` (any project-aware tool): Switches Related to Project Files
- `-vP` (`gnatclean`): Switches for gnatclean
- `-w`: Warning Message Control
- `-w` (`gcc`): Switches for gcc
- `-w` (`gnatbind`): Switches for gnatbind
- `-w` (`gnatchop`): Switches for gnatchop
- `-w` (`gnatpp`): Other gnatpp Switches
- `-W` (`gnatpp`): Output File Control
- `-Wall`: Warning Message Control
- `-we` (`gnatbind`): Binder Error Message Control
- `-wq` (`gnatelim`): Running gnatelim
- `-ws` (`gnatbind`): Binder Error Message Control
- `-Wstack-usage`: Warning Message Control
- `-Wuninitialized`: Warning Message Control
- `-Wunused`: Warning Message Control
- `-Wx` (`gnatbind`): Consistency-Checking Modes
- `-Wx` (`gnatbind`): Switches for gnatbind
- `-X`: Scenarios in Projects
- `-X` (any project-aware tool): Switches Related to Project Files
- `-x` (`gnatbind`): Consistency-Checking Modes
- `-x` (`gnatbind`): Switches for gnatbind
- `-X` (`gnatclean`): Switches for gnatclean
- `-x` (`gnatmake`): Switches for gnatmake
- `-x` (`gnatmetric`): Output Files Control
- `-x` (`gnatname`): Switches for gnatname
- `-X` (`gnattest`): Switches for gnattest
- `-xs` (`gnatmetric`): Output Files Control
- `-y` (`gnatbind`): Switches for gnatbind
- `-z` (`gnatbind`): Binding Programs with No Main Subprogram
- `-z` (`gnatbind`): Switches for gnatbind
- `-z` (`gnatmake`): Switches for gnatmake
- `.def`: The Definition File
- `__gnat_finalize`: Example of Binder Output File
- `__gnat_initialize`: Example of Binder Output File
- `__gnat_malloc`: Switches for gnatbind
- `__gnat_set_globals`: Example of Binder Output File
- `_main`: The External Symbol Naming Scheme of GNAT
- Access before elaboration: Run-Time Checks
- ACVC, Ada 83 tests: Compiling Different Versions of Ada
- `Ada`: Naming Conventions for GNAT Source Files
- `Ada`: Search Paths for gnatbind
- Ada 2005 Language Reference Manual: What You Should Know before Reading This Guide
- Ada 2005 mode: Compiling Different Versions of Ada
- Ada 2012 mode: Compiling Different Versions of Ada
- Ada 83 mode: Compiling Different Versions of Ada
- Ada 95 Language Reference Manual: What You Should Know before Reading This Guide
- Ada 95 mode: Compiling Different Versions of Ada
- Ada compatibility issues warnings: Warning Message Control
- Ada expressions: Using Ada Expressions
- Ada language extensions: Compiling Different Versions of Ada
- Ada Library Information files: The Ada Library Information Files
- `Ada.Characters.Latin_1`: Latin-1
- `ADA_INCLUDE_PATH`: Search Paths and the Run-Time Library (RTL)
- `ADA_OBJECTS_PATH`: Search Paths for gnatbind
- `ADA_PRJ_INCLUDE_FILE`: Search Paths and the Run-Time Library (RTL)
- `ADA_PRJ_OBJECTS_FILE`: Search Paths for gnatbind
- `ADA_PROJECT_PATH`: Installing a library
- `ADA_PROJECT_PATH`: Project Dependencies
- `adafinal`: Example of Binder Output File
- `adafinal`: Binding with Non-Ada Main Programs
- `adainit`: Example of Binder Output File
- `adainit`: Binding with Non-Ada Main Programs
- Address Clauses, warnings: Warning Message Control
- afferent coupling: Coupling Metrics Control
- AIX resolver library: AIX-Specific Considerations
- `ALI` files: The Ada Library Information Files
- Aliasing: Optimization and Strict Aliasing
- Alignment control in `gnatpp`: Alignment Control
- Annex A: Naming Conventions for GNAT Source Files
- Annex B: Naming Conventions for GNAT Source Files
- `APIENTRY`: Windows Calling Conventions
- Arbitrary File Naming Conventions: Handling Arbitrary File Naming Conventions Using gnatname
- ASIS: Verifying Properties Using gnatcheck
- `Asm`: Calling Conventions
- `Assert`: Debugging and Assertion Control
- Assert failures: Warning Message Control
- Assertions: Debugging and Assertion Control
- Bad fixed values: Warning Message Control
- Biased representation: Warning Message Control
- Binder consistency checks: Binder Error Message Control
- Binder output file: Interfacing to C
- Binder, multiple input files: Binding with Non-Ada Main Programs
- `binding`: Generating Ada Bindings for C and C++ headers
- bit order warnings: Warning Message Control
- `Body`: Naming Schemes
- `Body_Suffix`: Naming Schemes
- Breakpoints and tasks: Ada Tasks
- `Build_Slaves`: Distributed support
- Building the GNAT Run-Time Library: Rebuilding the GNAT Run-Time Library
- `C`: Calling Conventions
- `C varargs function`: Calling Conventions
- `C++`: Calling Conventions
- Calling Conventions: Calling Conventions
- cannot generate code: Compiling Programs
- case statement: Scenarios in Projects
- `case` statement (effect of `-mbig-switch` option): Switches for gcc
- `Casing`: Naming Schemes
- Casing control in `gnatpp`: Casing Control
- `Ceiling_Locking` (under rts-pthread): Solaris Threads Issues
- Check, elaboration: Run-Time Checks
- Check, overflow: Run-Time Checks
- Checks (overflow): Overflow Check Handling in GNAT
- Checks, access before elaboration: Run-Time Checks
- Checks, division by zero: Run-Time Checks
- Checks, elaboration: Checking the Elaboration Order
- Checks, overflow: Controlling Run-Time Checks
- Checks, stack overflow checking: Run-Time Checks
- Checks, suppressing: Run-Time Checks
- Cleaning tool: Cleaning Up Using gnatclean
- `COBOL`: Calling Conventions
- Code Coverage: Code Coverage of Ada Programs using gcov
- Code Coverage: Code Coverage and Profiling
- code page 437: Other 8-Bit Codes
- code page 850: Other 8-Bit Codes
- Combining GNAT switches: Switches for gcc
- command line length: Tools Options in Project Files
- Command line length: Switches for gnatlink
- Compatibility (between Ada 83 and Ada 95 / Ada 2005): Compatibility with Ada 83
- Compatibility between Ada 95 and Ada 2005: Compatibility between Ada 95 and Ada 2005
- Compatibility with Ada 83: Compiling Different Versions of Ada
- Compilation model: The GNAT Compilation Model
- Complexity metrics control in `gnatmetric`: Complexity Metrics Control
- Component clause, missing: Warning Message Control
- Conditional compilation: Conditional Compilation
- Conditionals, constant: Warning Message Control
- Configuration pragmas: Configuration Pragmas
- Consistency checks, in binder: Binder Error Message Control
- CONSOLE Subsystem: CONSOLE and WINDOWS subsystems
- Convention Ada: Calling Conventions
- Convention Asm: Calling Conventions
- Convention Assembler: Calling Conventions
- Convention C: Calling Conventions
- Convention C++: Calling Conventions
- Convention COBOL: Calling Conventions
- Convention Default: Calling Conventions
- Convention DLL: Calling Conventions
- Convention External: Calling Conventions
- Convention Fortran: Calling Conventions
- Convention Stdcall: Calling Conventions
- Convention Stubbed: Calling Conventions
- Convention Win32: Calling Conventions
- Conventions: Conventions
- Coupling metrics (in in `gnatmetric`): Coupling Metrics Control
- Coupling metrics control in `gnatmetric`: Coupling Metrics Control
- `CR`: Source Representation
- Cyrillic: Other 8-Bit Codes
- Deactivated code, warnings: Warning Message Control
- `Debug`: Debugging and Assertion Control
- `Debug Pool`: The GNAT Debug Pool Facility
- Debugger: Running and Debugging Ada Programs
- Debugging: Running and Debugging Ada Programs
- Debugging Generic Units: Debugging Generic Units
- Debugging information, including: Switches for gnatlink
- Debugging optimized code: Debugging Optimized Code
- Debugging options: Debugging Control
- `Default`: Calling Conventions
- `Default_Switches`: Tools Options in Project Files
- Definition file: The Definition File
- Deleted code, warnings: Warning Message Control
- Dependencies, producing list: Switches for gnatmake
- Dependency rules: The GNAT Make Program gnatmake
- Dereferencing, implicit: Warning Message Control
- Disable Metrics For Local Units in `gnatmetric`: Disable Metrics For Local Units
- Dispatching calls: Elaboration for Dispatching Calls
- Division by zero: Run-Time Checks
- `DLL`: Introduction to Dynamic Link Libraries (DLLs)
- `DLL`: Calling Conventions
- DLL debugging: Debugging a DLL
- DLL debugging, attach to process: Attaching to a Running Process
- DLLs and elaboration: Ada DLLs and Elaboration
- DLLs and finalization: Ada DLLs and Finalization
- DLLs, building: Building DLLs with gnatdll
- DLLs, building: Building DLLs with GNAT
- DLLs, building: Building DLLs with GNAT Project files
- `Dot_Replacement`: Naming Schemes
- efferent coupling: Coupling Metrics Control
- `Elaborate`: Controlling the Elaboration Order
- `Elaborate_All`: Controlling the Elaboration Order
- `Elaborate_Body`: Controlling the Elaboration Order
- Elaboration checks: Checking the Elaboration Order
- Elaboration checks: Run-Time Checks
- Elaboration control: Summary of Procedures for Elaboration Control
- Elaboration control: Elaboration Order Handling in GNAT
- Elaboration of library tasks: Elaboration Issues for Library Tasks
- Elaboration order control: Comparison between GNAT and C/C++ Compilation Models
- Elaboration, warnings: Warning Message Control
- Eligible local unit (for `gnatmetric`): Disable Metrics For Local Units
- End of source file: Source Representation
- Error messages, suppressing: Output and Error Message Control
- EUC Coding: Wide Character Encodings
- Exceptions: Ada Exceptions
- `Excluded_Source_Dirs`: Source Files and Directories
- `Excluded_Source_Files`: Project Extension
- `Excluded_Source_Files`: Source Files and Directories
- `Excluded_Source_List_File`: Project Extension
- `Excluded_Source_List_File`: Source Files and Directories
- `Exec_Dir`: Object and Exec Directory
- `Executable`: Executable File Names
- `Executable_Suffix`: Executable File Names
- `Export`: The External Symbol Naming Scheme of GNAT
- Export table: Exporting Ada Entities
- Export/Import pragma warnings: Warning Message Control
- extends all: Project Hierarchy Extension
- `External`: Syntax of aggregate projects
- `external`: Scenarios in Projects
- `External`: Calling Conventions
- `Externally_Built`: Project Dependencies
- fan-in coupling: Coupling Metrics Control
- fan-out coupling: Coupling Metrics Control
- FDL, GNU Free Documentation License: GNU Free Documentation License
- Features, obsolescent: Warning Message Control
- `FF`: Source Representation
- File names: Alternative File Naming Schemes
- File names: Using Other File Names
- File naming schemes, alternative: Alternative File Naming Schemes
- Fixed-point Small value: Warning Message Control
- Foreign Languages: Calling Conventions
- Formals, unreferenced: Warning Message Control
- `Fortran`: Calling Conventions
- gcov: Code Coverage of Ada Programs using gcov
- `gdb`: Running and Debugging Ada Programs
- Generic formal parameters: Compiling Different Versions of Ada
- Generics: Debugging Generic Units
- Generics: Generating Object Files
- `Global_Compilation_Switches`: package Builder in aggregate projects
- `Global_Compilation_Switches`: Global Attributes
- `Global_Configuration_Pragmas`: package Builder in aggregate projects
- `Global_Configuration_Pragmas`: Global Attributes
- `GNAT`: Naming Conventions for GNAT Source Files
- `GNAT`: Search Paths for gnatbind
- GNAT Abnormal Termination or Failure to Terminate: GNAT Abnormal Termination or Failure to Terminate
- GNAT compilation model: The GNAT Compilation Model
- GNAT extensions: Compiling Different Versions of Ada
- GNAT library: Comparison between GNAT and Conventional Ada Library Models
- GNAT Programming Studio (GPS): Introduction to GPS
- GNAT Run-Time Library, rebuilding: Rebuilding the GNAT Run-Time Library
- `gnat.adc`: The Configuration Pragmas Files
- `gnat.adc`: Using Other File Names
- `gnat1`: Compiling Programs
- `gnat_argc`: Command-Line Access
- `gnat_argv`: Command-Line Access
- GNAT_INIT_SCALARS: Switches for gnatbind
- `GNAT_PROCESSOR` environment variable (on Sparc Solaris): Solaris Threads Issues
- GNAT_STACK_LIMIT: Stack Overflow Checking
- `gnatbind`: Binding Using gnatbind
- `gnatcheck`: Verifying Properties Using gnatcheck
- `gnatchop`: Renaming Files Using gnatchop
- `gnatclean`: Cleaning Up Using gnatclean
- `gnatdll`: Using gnatdll
- `gnatelim`: Reducing Size of Ada Executables with gnatelim
- `gnatfind`: The Cross-Referencing Tools gnatxref and gnatfind
- `gnatkr`: File Name Krunching Using gnatkr
- `gnatlink`: Linking Using gnatlink
- `gnatls`: The GNAT Library Browser gnatls
- `gnatmake`: The GNAT Make Program gnatmake
- `gnatmem`: The gnatmem Tool
- `gnatmetric`: The GNAT Metric Tool gnatmetric
- `gnatpp`: The GNAT Pretty-Printer gnatpp
- `gnatprep`: Preprocessing
- `gnatprep`: Preprocessing Using gnatprep
- `gnatstub`: Creating Sample Bodies Using gnatstub
- `gnattest`: Creating Unit Tests Using gnattest
- `gnatxref`: The Cross-Referencing Tools gnatxref and gnatfind
- GNU make: Using gnatmake in a Makefile
- `GPR_PROJECT_PATH`: Installing a library
- `GPR_PROJECT_PATH`: Project Dependencies
- gprof: Profiling an Ada Program using gprof
- GPS (GNAT Programming Studio): Introduction to GPS
- Hiding of Declarations: Warning Message Control
- HP-UX and `-mbig-switch` option: Switches for gcc
- HP-UX Scheduling: HP-UX-Specific Considerations
- `HT`: Source Representation
- `Ignore_Source_Sub_Dirs`: Source Files and Directories
- `Implementation`: Naming Schemes
- `Implementation_Exceptions`: Naming Schemes
- `Implementation_Suffix`: Naming Schemes
- Implicit dereferencing: Warning Message Control
- Import library: Creating an Import Library
- Improving performance: Improving Performance
- `Inheritance_Locking` (under rts-pthread): Solaris Threads Issues
- `Inline`: Inlining of Subprograms
- `Inline`: Source Dependencies
- Inlining: Comparison between GNAT and Conventional Ada Library Models
- Inlining, warnings: Warning Message Control
- `Interfaces`: Naming Conventions for GNAT Source Files
- `Interfaces`: Search Paths for gnatbind
- Interfacing to Ada: Calling Conventions
- Interfacing to Assembly: Calling Conventions
- Interfacing to C: Calling Conventions
- Interfacing to C varargs function: Calling Conventions
- Interfacing to C++: Calling Conventions
- Interfacing to COBOL: Calling Conventions
- Interfacing to Fortran: Calling Conventions
- Internal trees, writing to file: Auxiliary Output Control
- ISO 8859-15: Other 8-Bit Codes
- ISO 8859-2: Other 8-Bit Codes
- ISO 8859-3: Other 8-Bit Codes
- ISO 8859-4: Other 8-Bit Codes
- ISO 8859-5: Other 8-Bit Codes
- `Languages`: Source Files and Directories
- Latin-1: Changed semantics
- Latin-1: Latin-1
- Latin-1: Source Representation
- Latin-2: Other 8-Bit Codes
- Latin-3: Other 8-Bit Codes
- Latin-4: Other 8-Bit Codes
- Latin-9: Other 8-Bit Codes
- Layout control in `gnatpp`: Construct Layout Control
- `Leading_Library_Options`: Building Libraries
- `LF`: Source Representation
- Library browser: The GNAT Library Browser gnatls
- Library tasks, elaboration issues: Elaboration Issues for Library Tasks
- Library, building, installing, using: GNAT and Libraries
- `Library_ALI_Dir`: Building Libraries
- `Library_Auto_Init`: Stand-alone Library Projects
- `Library_Dir`: Stand-alone Library Projects
- `Library_Dir`: Building Libraries
- `Library_GCC`: Building Libraries
- `Library_Interface`: Stand-alone Library Projects
- `Library_Kind`: Building Libraries
- `Library_Name`: Building Libraries
- `Library_Options`: Building Libraries
- `Library_Reference_Symbol_File`: Stand-alone Library Projects
- `Library_Src_Dir`: Stand-alone Library Projects
- `Library_Standalone`: Stand-alone Library Projects
- `Library_Symbol_File`: Stand-alone Library Projects
- `Library_Symbol_Policy`: Stand-alone Library Projects
- `Library_Version`: Building Libraries
- Line metrics control in `gnatmetric`: Line Metrics Control
- Linker libraries: Switches for gnatmake
- `Linker_Options`: Building Libraries
- Linux threads libraries: Linux-Specific Considerations
- `Local_Configuration_Pragmas`: Tools Options in Project Files
- `Locally_Removed_Files`: Source Files and Directories
- `Machine_Overflows`: Run-Time Checks
- `Main`: Main Subprograms
- `Main Program`: Example of Binder Output File
- `make`: Using the GNU make Utility
- `makefile`: Using gnatmake in a Makefile
- Makefile package in projects: Packages
- `Memory Pool`: Some Useful Memory Pools
- Metric tool: The GNAT Metric Tool gnatmetric
- Mixed Language Programming: Mixed Language Programming
- Multiple units, syntax checking: Using gcc for Syntax Checking
- N (`gnatmem`): Switches for gnatmem
- Naming scheme: Source Files and Directories
- naming scheme: Switches for gnatmake
- No_Entry_Calls_In_Elaboration_Code: Elaboration Issues for Library Tasks
- No_Strict_Aliasing: Optimization and Strict Aliasing
- `Object file list`: Example of Binder Output File
- `Object_Dir`: Object and Exec Directory
- Obsolescent features: Warning Message Control
- Optimization and debugging: Debugging Optimized Code
- Optimization Switches: Other Optimization Switches
- Optimization Switches: Vectorization of loops
- Order of elaboration: Elaboration Order Handling in GNAT
- OS X: Mac OS Topics
- Other Ada compilers: Calling Conventions
- Output file control in `gnatmetric`: Output Files Control
- Overflow checks: Overflow Check Handling in GNAT
- Overflow checks: Controlling Run-Time Checks
- Overflow checks: Run-Time Checks
- Overflow mode: Run-Time Checks
- Parallel make: Switches for gnatmake
- Parameter order, warnings: Warning Message Control
- Parentheses, warnings: Warning Message Control
- portability: Source Files and Directories
- pragma `Assert`: Debugging - A Special Case
- pragma `Assertion_Policy`: Debugging - A Special Case
- pragma `Debug`: Debugging - A Special Case
- pragma `Debug_Policy`: Debugging - A Special Case
- Pragma Elaborate: Treatment of Pragma Elaborate
- pragma Elaborate: Controlling the Elaboration Order
- pragma Elaborate_All: Controlling the Elaboration Order
- pragma Elaborate_Body: Controlling the Elaboration Order
- pragma Inline: Inlining of Subprograms
- pragma Locking_Policy (under rts-pthread): Solaris Threads Issues
- pragma `Overflow_Mode`: Specifying the Desired Mode
- pragma Preelaborate: Controlling the Elaboration Order
- pragma Pure: Controlling the Elaboration Order
- pragma Restrictions: Debugging Control
- pragma Suppress: Controlling Run-Time Checks
- pragma Task_Dispatching_Policy: HP-UX-Specific Considerations
- pragma Task_Dispatching_Policy: Choosing the Scheduling Policy
- pragma Time_Slice: HP-UX-Specific Considerations
- pragma Time_Slice: Choosing the Scheduling Policy
- pragma Unsuppress: Controlling Run-Time Checks
- Pragmas, configuration: Configuration Pragmas
- Pragmas, unrecognized: Warning Message Control
- `Preelaborate`: Controlling the Elaboration Order
- `Prefix`: Installation
- Preprocessing: Preprocessing
- Preprocessors (contrasted with conditional compilation): Use of Boolean Constants
- Pretty-Printer: The GNAT Pretty-Printer gnatpp
- Profiling: Compilation for profiling
- Profiling: Profiling an Ada Program using gprof
- Profiling: Code Coverage and Profiling
- project file packages: Tools Options in Project Files
- project path: Project Dependencies
- project qualifier: Sharing Between Projects
- `Project_Files`: Syntax of aggregate projects
- `Project_Path`: Syntax of aggregate projects
- `PTHREAD_PRIO_INHERIT` policy (under rts-pthread): Solaris Threads Issues
- `PTHREAD_PRIO_PROTECT` policy (under rts-pthread): Solaris Threads Issues
- `Pure`: Controlling the Elaboration Order
- `rc`: Compiling Resources
- Rebuilding the GNAT Run-Time Library: Rebuilding the GNAT Run-Time Library
- Recompilation, by `gnatmake`: Notes on the Command Line
- Record Representation (component sizes): Warning Message Control
- Record Representation (gaps): Warning Message Control
- Remote Debugging using gdbserver: Remote Debugging using gdbserver
- Resources, building: Building Resources
- Resources, compiling: Compiling Resources
- Resources, using: Using Resources
- Resources, windows: GNAT and Windows Resources
- `Root_Dir`: Distributed support
- `rsync`: Distributed support
- RTL: Switches for gcc
- rts-pthread threads library: Solaris Threads Issues
- RTX libraries: RTX-Specific Considerations
- Run-time libraries (platform-specific information): Platform-Specific Information for the Run-Time Libraries
- Run-Time Library, rebuilding: Rebuilding the GNAT Run-Time Library
- scenarios: Scenarios in Projects
- `SCHED_FIFO` scheduling policy: Choosing the Scheduling Policy
- `SCHED_OTHER` scheduling policy: Choosing the Scheduling Policy
- `SCHED_RR` scheduling policy: Choosing the Scheduling Policy
- `SDP_Table_Build`: Example of Binder Output File
- Search paths, for `gnatmake`: Switches for gnatmake
- `Separate_Suffix`: Naming Schemes
- setjmp/longjmp Exception Model: Platform-Specific Information for the Run-Time Libraries
- Shift JIS Coding: Wide Character Encodings
- SJLJ (setjmp/longjmp Exception Model): Platform-Specific Information for the Run-Time Libraries
- Small value: Warning Message Control
- Solaris Sparc threads libraries: Solaris-Specific Considerations
- Source directories: Source Files and Directories
- Source directories, recursive: Source Files and Directories
- Source file, end: Source Representation
- Source files, suppressing search: Switches for gnatclean
- Source files, suppressing search: Switches for gnatmake
- Source files, use by binder: Running gnatbind
- `Source_Dirs`: Source Files and Directories
- Source_File_Name pragma: Alternative File Naming Schemes
- Source_File_Name pragma: Using Other File Names
- `Source_Files`: Source Files and Directories
- `Source_List_File`: Source Files and Directories
- `Source_Reference`: Switches for gnatchop
- `Spec`: Naming Schemes
- `Spec_Suffix`: Naming Schemes
- `Specification`: Naming Schemes
- `Specification_Exceptions`: Naming Schemes
- `Specification_Suffix`: Naming Schemes
- Stack Overflow Checking: Stack Overflow Checking
- Stack Overflow Checking: Run-Time Checks
- stack traceback: Stack Traceback
- stack unwinding: Stack Traceback
- Stand-alone library, building, using: Stand-alone Ada Libraries
- standalone libraries: Stand-alone Library Projects
- Static Stack Usage Analysis: Static Stack Usage Analysis
- `Stdcall`: Windows Calling Conventions
- `Stdcall`: Calling Conventions
- `stderr`: Output and Error Message Control
- `stdout`: Output and Error Message Control
- storage, pool: Some Useful Memory Pools
- storage, pool, memory corruption: The GNAT Debug Pool Facility
- Strict Aliasing: Optimization and Strict Aliasing
- String indexing warnings: Warning Message Control
- `Stubbed`: Calling Conventions
- `Style checking`: Style Checking
- `SUB`: Source Representation
- Subunits: Generating Object Files
- Subunits (and conditional compilation): Use of Alternative Implementations
- `Suppress`: Controlling Run-Time Checks
- `Suppress`: Run-Time Checks
- Suppressing checks: Run-Time Checks
- `Switches`: package Builder in aggregate projects
- `Switches`: Tools Options in Project Files
- symbolic links: Switches for gnatmake
- Syntax metrics control in `gnatmetric`: Syntax Metrics Control
- `System`: Naming Conventions for GNAT Source Files
- `System`: Search Paths for gnatbind
- `System.IO`: Search Paths and the Run-Time Library (RTL)
- Task switching: Ada Tasks
- Tasking and threads libraries: Platform-Specific Information for the Run-Time Libraries
- Tasks: Ada Tasks
- Temporary files: Temporary Files
- `Text_IO` and performance: Text_IO Suggestions
- Threads libraries and tasking: Platform-Specific Information for the Run-Time Libraries
- Time stamp checks, in binder: Binder Error Message Control
- traceback: Stack Traceback
- traceback, non-symbolic: Non-Symbolic Traceback
- traceback, symbolic: Symbolic Traceback
- typed variable: Scenarios in Projects
- Typographical conventions: Conventions
- Unassigned variable warnings: Warning Message Control
- Unchecked_Conversion warnings: Warning Message Control
- `Unsuppress`: Controlling Run-Time Checks
- `Unsuppress`: Run-Time Checks
- `unused subprogram/data elimination`: Reducing Size of Executables with unused subprogram/data elimination
- Upper-Half Coding: Wide Character Encodings
- `Validity Checking`: Validity Checking
- varargs function interfaces: Calling Conventions
- Version skew (avoided by `gnatmake`): Running a Simple Ada Program
- Volatile parameter: The Volatile Parameter
- `VT`: Source Representation
- Warning messages: Warning Message Control
- Warnings: Binder Error Message Control
- Warnings Off control: Warning Message Control
- Warnings, activate every optional warning: Warning Message Control
- Warnings, treat as error: Warning Message Control
- `Win32`: Calling Conventions
- Windows 95: Microsoft Windows Topics
- Windows 98: Microsoft Windows Topics
- Windows NT: Microsoft Windows Topics
- WINDOWS Subsystem: CONSOLE and WINDOWS subsystems
- `windres`: Compiling Resources
- Writing internal trees: Auxiliary Output Control
- ZCX (Zero-Cost Exceptions): Platform-Specific Information for the Run-Time Libraries
- `Zero Cost Exceptions`: Example of Binder Output File
- Zero Cost Exceptions: Exception Handling Control
- Zero-Cost Exceptions: Platform-Specific Information for the Run-Time Libraries

## Table of Contents

- GNAT User's Guide
- About This Guide
  - What This Guide Contains
  - What You Should Know before Reading This Guide
  - Related Information
  - Conventions
- 1 Getting Started with GNAT
  - 1.1 Running GNAT
  - 1.2 Running a Simple Ada Program
  - 1.3 Running a Program with Multiple Units
  - 1.4 Using the `gnatmake` Utility
  - 1.5 Introduction to GPS
    - 1.5.1 Building a New Program with GPS
    - 1.5.2 Simple Debugging with GPS
- 2 The GNAT Compilation Model
  - 2.1 Source Representation
  - 2.2 Foreign Language Representation
    - 2.2.1 Latin-1
    - 2.2.2 Other 8-Bit Codes
    - 2.2.3 Wide Character Encodings
  - 2.3 File Naming Rules
  - 2.4 Using Other File Names
  - 2.5 Alternative File Naming Schemes
  - 2.6 Generating Object Files
  - 2.7 Source Dependencies
  - 2.8 The Ada Library Information Files
  - 2.9 Binding an Ada Program
  - 2.10 Mixed Language Programming
    - 2.10.1 Interfacing to C
    - 2.10.2 Calling Conventions
  - 2.11 Building Mixed Ada and C++ Programs
    - 2.11.1 Interfacing to C++
    - 2.11.2 Linking a Mixed C++ & Ada Program
    - 2.11.3 A Simple Example
    - 2.11.4 Interfacing with C++ constructors
    - 2.11.5 Interfacing with C++ at the Class Level
  - 2.12 Comparison between GNAT and C/C++ Compilation Models
  - 2.13 Comparison between GNAT and Conventional Ada Library Models
- 3 Compiling Using `gcc`
  - 3.1 Compiling Programs
  - 3.2 Switches for `gcc`
    - 3.2.1 Output and Error Message Control
    - 3.2.2 Warning Message Control
    - 3.2.3 Debugging and Assertion Control
    - 3.2.4 Validity Checking
    - 3.2.5 Style Checking
    - 3.2.6 Run-Time Checks
    - 3.2.7 Using `gcc` for Syntax Checking
    - 3.2.8 Using `gcc` for Semantic Checking
    - 3.2.9 Compiling Different Versions of Ada
    - 3.2.10 Character Set Control
    - 3.2.11 File Naming Control
    - 3.2.12 Subprogram Inlining Control
    - 3.2.13 Auxiliary Output Control
    - 3.2.14 Debugging Control
    - 3.2.15 Exception Handling Control
    - 3.2.16 Units to Sources Mapping Files
    - 3.2.17 Integrated Preprocessing
    - 3.2.18 Code Generation Control
  - 3.3 Search Paths and the Run-Time Library (RTL)
  - 3.4 Order of Compilation Issues
  - 3.5 Examples
- 4 Binding Using `gnatbind`
  - 4.1 Running `gnatbind`
  - 4.2 Switches for `gnatbind`
    - 4.2.1 Consistency-Checking Modes
    - 4.2.2 Binder Error Message Control
    - 4.2.3 Elaboration Control
    - 4.2.4 Output Control
    - 4.2.5 Dynamic Allocation Control
    - 4.2.6 Binding with Non-Ada Main Programs
    - 4.2.7 Binding Programs with No Main Subprogram
  - 4.3 Command-Line Access
  - 4.4 Search Paths for `gnatbind`
  - 4.5 Examples of `gnatbind` Usage
- 5 Linking Using `gnatlink`
  - 5.1 Running `gnatlink`
  - 5.2 Switches for `gnatlink`
- 6 The GNAT Make Program `gnatmake`
  - 6.1 Running `gnatmake`
  - 6.2 Switches for `gnatmake`
  - 6.3 Mode Switches for `gnatmake`
  - 6.4 Notes on the Command Line
  - 6.5 How `gnatmake` Works
  - 6.6 Examples of `gnatmake` Usage
- 7 Improving Performance
  - 7.1 Performance Considerations
    - 7.1.1 Controlling Run-Time Checks
    - 7.1.2 Use of Restrictions
    - 7.1.3 Optimization Levels
    - 7.1.4 Debugging Optimized Code
    - 7.1.5 Inlining of Subprograms
    - 7.1.6 Vectorization of loops
    - 7.1.7 Other Optimization Switches
    - 7.1.8 Optimization and Strict Aliasing
  - 7.2 `Text_IO` Suggestions
  - 7.3 Reducing Size of Ada Executables with `gnatelim`
    - 7.3.1 About `gnatelim`
    - 7.3.2 Running `gnatelim`
    - 7.3.3 Processing Precompiled Libraries
    - 7.3.4 Correcting the List of Eliminate Pragmas
    - 7.3.5 Making Your Executables Smaller
    - 7.3.6 Summary of the `gnatelim` Usage Cycle
  - 7.4 Reducing Size of Executables with Unused Subprogram/Data Elimination
    - 7.4.1 About unused subprogram/data elimination
    - 7.4.2 Compilation options
    - 7.4.3 Example of unused subprogram/data elimination
- 8 Renaming Files Using `gnatchop`
  - 8.1 Handling Files with Multiple Units
  - 8.2 Operating gnatchop in Compilation Mode
  - 8.3 Command Line for `gnatchop`
  - 8.4 Switches for `gnatchop`
  - 8.5 Examples of `gnatchop` Usage
- 9 Configuration Pragmas
  - 9.1 Handling of Configuration Pragmas
  - 9.2 The Configuration Pragmas Files
- 10 Handling Arbitrary File Naming Conventions Using `gnatname`
  - 10.1 Arbitrary File Naming Conventions
  - 10.2 Running `gnatname`
  - 10.3 Switches for `gnatname`
  - 10.4 Examples of `gnatname` Usage
- 11 GNAT Project Manager
  - 11.1 Introduction
  - 11.2 Building With Projects
    - 11.2.1 Source Files and Directories
    - 11.2.2 Object and Exec Directory
    - 11.2.3 Main Subprograms
    - 11.2.4 Tools Options in Project Files
    - 11.2.5 Compiling with Project Files
    - 11.2.6 Executable File Names
    - 11.2.7 Avoid Duplication With Variables
    - 11.2.8 Naming Schemes
    - 11.2.9 Installation
    - 11.2.10 Distributed support
  - 11.3 Organizing Projects into Subsystems
    - 11.3.1 Project Dependencies
    - 11.3.2 Cyclic Project Dependencies
    - 11.3.3 Sharing Between Projects
    - 11.3.4 Global Attributes
  - 11.4 Scenarios in Projects
  - 11.5 Library Projects
    - 11.5.1 Building Libraries
    - 11.5.2 Using Library Projects
    - 11.5.3 Stand-alone Library Projects
    - 11.5.4 Installing a library with project files
  - 11.6 Project Extension
    - 11.6.1 Project Hierarchy Extension
  - 11.7 Aggregate Projects
    - 11.7.1 Building all main programs from a single project tree
    - 11.7.2 Building a set of projects with a single command
    - 11.7.3 Define a build environment
    - 11.7.4 Performance improvements in builder
    - 11.7.5 Syntax of aggregate projects
    - 11.7.6 package Builder in aggregate projects
  - 11.8 Aggregate Library Projects
    - 11.8.1 Building aggregate library projects
    - 11.8.2 Syntax of aggregate library projects
  - 11.9 Project File Reference
    - 11.9.1 Project Declaration
    - 11.9.2 Qualified Projects
    - 11.9.3 Declarations
    - 11.9.4 Packages
    - 11.9.5 Expressions
    - 11.9.6 External Values
    - 11.9.7 Typed String Declaration
    - 11.9.8 Variables
    - 11.9.9 Attributes
    - 11.9.10 Case Statements
- 12 Tools Supporting Project Files
  - 12.1 gnatmake and Project Files
    - 12.1.1 Switches Related to Project Files
    - 12.1.2 Switches and Project Files
    - 12.1.3 Specifying Configuration Pragmas
    - 12.1.4 Project Files and Main Subprograms
    - 12.1.5 Library Project Files
  - 12.2 The GNAT Driver and Project Files
  - 12.3 The Development Environments
- 13 The Cross-Referencing Tools `gnatxref` and `gnatfind`
  - 13.1 `gnatxref` Switches
  - 13.2 `gnatfind` Switches
  - 13.3 Project Files for `gnatxref` and `gnatfind`
  - 13.4 Regular Expressions in `gnatfind` and `gnatxref`
  - 13.5 Examples of `gnatxref` Usage
    - 13.5.1 General Usage
    - 13.5.2 Using gnatxref with vi
  - 13.6 Examples of `gnatfind` Usage
- 14 The GNAT Pretty-Printer `gnatpp`
  - 14.1 Switches for `gnatpp`
    - 14.1.1 Alignment Control
    - 14.1.2 Casing Control
    - 14.1.3 Construct Layout Control
    - 14.1.4 General Text Layout Control
    - 14.1.5 Other Formatting Options
    - 14.1.6 Setting the Source Search Path
    - 14.1.7 Output File Control
    - 14.1.8 Other `gnatpp` Switches
  - 14.2 Formatting Rules
    - 14.2.1 White Space and Empty Lines
    - 14.2.2 Formatting Comments
    - 14.2.3 Construct Layout
    - 14.2.4 Name Casing
- 15 The GNAT Metric Tool `gnatmetric`
  - 15.1 Switches for `gnatmetric`
    - 15.1.1 Output File Control
    - 15.1.2 Disable Metrics For Local Units
    - 15.1.3 Specifying a set of metrics to compute
      - 15.1.3.1 Line Metrics Control
      - 15.1.3.2 Syntax Metrics Control
      - 15.1.3.3 Complexity Metrics Control
      - 15.1.3.4 Coupling Metrics Control
    - 15.1.4 Other `gnatmetric` Switches
    - 15.1.5 Generate project-wide metrics
- 16 File Name Krunching Using `gnatkr`
  - 16.1 About `gnatkr`
  - 16.2 Using `gnatkr`
  - 16.3 Krunching Method
  - 16.4 Examples of `gnatkr` Usage
- 17 Preprocessing Using `gnatprep`
  - 17.1 Preprocessing Symbols
  - 17.2 Using `gnatprep`
  - 17.3 Switches for `gnatprep`
  - 17.4 Form of Definitions File
  - 17.5 Form of Input Text for `gnatprep`
- 18 The GNAT Library Browser `gnatls`
  - 18.1 Running `gnatls`
  - 18.2 Switches for `gnatls`
  - 18.3 Example of `gnatls` Usage
- 19 Cleaning Up Using `gnatclean`
  - 19.1 Running `gnatclean`
  - 19.2 Switches for `gnatclean`
- 20 GNAT and Libraries
  - 20.1 Introduction to Libraries in GNAT
  - 20.2 General Ada Libraries
    - 20.2.1 Building a library
    - 20.2.2 Installing a library
    - 20.2.3 Using a library
  - 20.3 Stand-alone Ada Libraries
    - 20.3.1 Introduction to Stand-alone Libraries
    - 20.3.2 Building a Stand-alone Library
    - 20.3.3 Creating a Stand-alone Library to be used in a non-Ada context
    - 20.3.4 Restrictions in Stand-alone Libraries
  - 20.4 Rebuilding the GNAT Run-Time Library
- 21 Using the GNU `make` Utility
  - 21.1 Using gnatmake in a Makefile
  - 21.2 Automatically Creating a List of Directories
  - 21.3 Generating the Command Line Switches
  - 21.4 Overcoming Command Line Length Limits
- 22 Memory Management Issues
  - 22.1 Some Useful Memory Pools
  - 22.2 The GNAT Debug Pool Facility
  - 22.3 The `gnatmem` Tool
    - 22.3.1 Running `gnatmem`
    - 22.3.2 Switches for `gnatmem`
    - 22.3.3 Example of `gnatmem` Usage
- 23 Stack Related Facilities
  - 23.1 Stack Overflow Checking
  - 23.2 Static Stack Usage Analysis
  - 23.3 Dynamic Stack Usage Analysis
- 24 Verifying Properties Using `gnatcheck`
- 25 Creating Sample Bodies Using `gnatstub`
  - 25.1 Running `gnatstub`
  - 25.2 Switches for `gnatstub`
- 26 Creating Unit Tests Using `gnattest`
  - 26.1 Running `gnattest`
  - 26.2 Switches for `gnattest`
  - 26.3 Project Attributes for `gnattest`
  - 26.4 Simple Example
  - 26.5 Setting Up and Tearing Down the Testing Environment
  - 26.6 Regenerating Tests
  - 26.7 Default Test Behavior
  - 26.8 Testing Primitive Operations of Tagged Types
  - 26.9 Testing Inheritance
  - 26.10 Tagged Types Substitutability Testing
  - 26.11 Testing with Contracts
  - 26.12 Additional Tests
  - 26.13 Support for other platforms/run-times
  - 26.14 Current Limitations
- 27 Performing Dimensionality Analysis in GNAT
- 28 Generating Ada Bindings for C and C++ headers
  - 28.1 Running the binding generator
  - 28.2 Generating bindings for C++ headers
  - 28.3 Switches
- 29 Other Utility Programs
  - 29.1 Using Other Utility Programs with GNAT
  - 29.2 The External Symbol Naming Scheme of GNAT
  - 29.3 Converting Ada Files to HTML with `gnathtml`
  - 29.4 Installing `gnathtml`
- 30 Code Coverage and Profiling
  - 30.1 Code Coverage of Ada Programs using gcov
    - 30.1.1 Quick startup guide
    - 30.1.2 Gnat specifics
  - 30.2 Profiling an Ada Program using gprof
    - 30.2.1 Compilation for profiling
    - 30.2.2 Program execution
    - 30.2.3 Running gprof
    - 30.2.4 Interpretation of profiling results
- 31 Running and Debugging Ada Programs
  - 31.1 The GNAT Debugger GDB
  - 31.2 Running GDB
  - 31.3 Introduction to GDB Commands
  - 31.4 Using Ada Expressions
  - 31.5 Calling User-Defined Subprograms
  - 31.6 Using the Next Command in a Function
  - 31.7 Stopping when Ada Exceptions are Raised
  - 31.8 Ada Tasks
  - 31.9 Debugging Generic Units
  - 31.10 Remote Debugging using gdbserver
  - 31.11 GNAT Abnormal Termination or Failure to Terminate
  - 31.12 Naming Conventions for GNAT Source Files
  - 31.13 Getting Internal Debugging Information
  - 31.14 Stack Traceback
    - 31.14.1 Non-Symbolic Traceback
      - 31.14.1.1 Tracebacks From an Unhandled Exception
      - 31.14.1.2 Tracebacks From Exception Occurrences
      - 31.14.1.3 Tracebacks From Anywhere in a Program
    - 31.14.2 Symbolic Traceback
      - 31.14.2.1 Tracebacks From Exception Occurrences
      - 31.14.2.2 Tracebacks From Anywhere in a Program
- Appendix A Platform-Specific Information for the Run-Time Libraries
  - A.1 Summary of Run-Time Configurations
  - A.2 Specifying a Run-Time Library
  - A.3 Choosing the Scheduling Policy
  - A.4 Solaris-Specific Considerations
    - A.4.1 Solaris Threads Issues
  - A.5 Linux-Specific Considerations
  - A.6 AIX-Specific Considerations
  - A.7 RTX-Specific Considerations
  - A.8 HP-UX-Specific Considerations
- Appendix B Example of Binder Output File
- Appendix C Elaboration Order Handling in GNAT
  - C.1 Elaboration Code
  - C.2 Checking the Elaboration Order
  - C.3 Controlling the Elaboration Order
  - C.4 Controlling Elaboration in GNAT - Internal Calls
  - C.5 Controlling Elaboration in GNAT - External Calls
  - C.6 Default Behavior in GNAT - Ensuring Safety
  - C.7 Treatment of Pragma Elaborate
  - C.8 Elaboration Issues for Library Tasks
  - C.9 Mixing Elaboration Models
  - C.10 What to Do If the Default Elaboration Behavior Fails
  - C.11 Elaboration for Dispatching Calls
  - C.12 Summary of Procedures for Elaboration Control
  - C.13 Other Elaboration Order Considerations
- Appendix D Overflow Check Handling in GNAT
  - D.1 Background
  - D.2 Overflow Checking Modes in GNAT
  - D.3 Specifying the Desired Mode
  - D.4 Default Settings
  - D.5 Implementation Notes
- Appendix E Conditional Compilation
  - E.1 Use of Boolean Constants
  - E.2 Debugging - A Special Case
  - E.3 Conditionalizing Declarations
  - E.4 Use of Alternative Implementations
  - E.5 Preprocessing
- Appendix F Inline Assembler
  - F.1 Basic Assembler Syntax
  - F.2 A Simple Example of Inline Assembler
  - F.3 Output Variables in Inline Assembler
  - F.4 Input Variables in Inline Assembler
  - F.5 Inlining Inline Assembler Code
  - F.6 Other `Asm` Functionality
    - F.6.1 The `Clobber` Parameter
    - F.6.2 The `Volatile` Parameter
- Appendix G Compatibility and Porting Guide
  - G.1 Compatibility with Ada 83
    - G.1.1 Legal Ada 83 programs that are illegal in Ada 95
    - G.1.2 More deterministic semantics
    - G.1.3 Changed semantics
    - G.1.4 Other language compatibility issues
  - G.2 Compatibility between Ada 95 and Ada 2005
  - G.3 Implementation-dependent characteristics
    - G.3.1 Implementation-defined pragmas
    - G.3.2 Implementation-defined attributes
    - G.3.3 Libraries
    - G.3.4 Elaboration order
    - G.3.5 Target-specific aspects
  - G.4 Compatibility with Other Ada Systems
  - G.5 Representation Clauses
  - G.6 Compatibility with HP Ada 83
- Appendix H Microsoft Windows Topics
  - H.1 Using GNAT on Windows
  - H.2 Using a network installation of GNAT
  - H.3 CONSOLE and WINDOWS subsystems
  - H.4 Temporary Files
  - H.5 Mixed-Language Programming on Windows
  - H.6 Windows Calling Conventions
    - H.6.1 `C` Calling Convention
    - H.6.2 `Stdcall` Calling Convention
    - H.6.3 `Win32` Calling Convention
    - H.6.4 `DLL` Calling Convention
  - H.7 Introduction to Dynamic Link Libraries (DLLs)
  - H.8 Using DLLs with GNAT
    - H.8.1 Creating an Ada Spec for the DLL Services
    - H.8.2 Creating an Import Library
      - H.8.2.1 The Definition File
      - H.8.2.2 GNAT-Style Import Library
      - H.8.2.3 Microsoft-Style Import Library
  - H.9 Building DLLs with GNAT Project files
  - H.10 Building DLLs with GNAT
  - H.11 Building DLLs with gnatdll
    - H.11.1 Limitations When Using Ada DLLs from Ada
    - H.11.2 Exporting Ada Entities
    - H.11.3 Ada DLLs and Elaboration
    - H.11.4 Ada DLLs and Finalization
    - H.11.5 Creating a Spec for Ada DLLs
    - H.11.6 Creating the Definition File
    - H.11.7 Using `gnatdll`
      - H.11.7.1 `gnatdll` Example
      - H.11.7.2 `gnatdll` behind the Scenes
      - H.11.7.3 Using `dlltool`
  - H.12 GNAT and Windows Resources
    - H.12.1 Building Resources
    - H.12.2 Compiling Resources
    - H.12.3 Using Resources
  - H.13 Debugging a DLL
    - H.13.1 Program and DLL Both Built with GCC/GNAT
    - H.13.2 Program Built with Foreign Tools and DLL Built with GCC/GNAT
      - H.13.2.1 Debugging the DLL Directly
      - H.13.2.2 Attaching to a Running Process
  - H.14 Setting Stack Size from `gnatlink`
  - H.15 Setting Heap Size from `gnatlink`
- Appendix I Mac OS Topics
  - I.1 Codesigning the Debugger
- GNU Free Documentation License
  - ADDENDUM: How to use this License for your documents
- Index

#### Footnotes

[1] Most programs should experience a substantial speed improvement by being compiled with a ZCX run-time. This is especially true for tasking applications or applications with many exception handlers.