This is doc/gnat_rm.info, produced by makeinfo version 4.9 from
/v204/gcc-4.72/gcc/ada/gnat_rm.texi.

   Copyright (C) 1995-2008, Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
Invariant Sections, with the Front-Cover Texts being "GNAT Reference
Manual", and with no Back-Cover Texts.  A copy of the license is
included in the section entitled "GNU Free Documentation License".

INFO-DIR-SECTION GNU Ada tools
START-INFO-DIR-ENTRY
* GNAT Reference Manual: (gnat_rm).  Reference Manual for GNU Ada tools.
END-INFO-DIR-ENTRY


File: gnat_rm.info,  Node: Top,  Next: About This Guide,  Prev: (dir),  Up: (dir)

GNAT Reference Manual
*********************

GNAT Reference Manual

GNAT, The GNU Ada Compiler
GCC version 4.7.2
AdaCore

* Menu:

* About This Guide::
* Implementation Defined Pragmas::
* Implementation Defined Attributes::
* Implementation Defined Restrictions::
* Implementation Advice::
* Implementation Defined Characteristics::
* Intrinsic Subprograms::
* Representation Clauses and Pragmas::
* Standard Library Routines::
* The Implementation of Standard I/O::
* The GNAT Library::
* Interfacing to Other Languages::
* Specialized Needs Annexes::
* Implementation of Specific Ada Features::
* Implementation of Ada 2012 Features::
* Obsolescent Features::
* GNU Free Documentation License::
* Index::

 --- The Detailed Node Listing ---

About This Guide

* What This Reference Manual Contains::
* Related Information::

Implementation Defined Pragmas

* Pragma Abort_Defer::
* Pragma Ada_83::
* Pragma Ada_95::
* Pragma Ada_05::
* Pragma Ada_2005::
* Pragma Ada_12::
* Pragma Ada_2012::
* Pragma Annotate::
* Pragma Assert::
* Pragma Assertion_Policy::
* Pragma Assume_No_Invalid_Values::
* Pragma Ast_Entry::
* Pragma C_Pass_By_Copy::
* Pragma Check::
* Pragma Check_Name::
* Pragma Check_Policy::
* Pragma Comment::
* Pragma Common_Object::
* Pragma Compile_Time_Error::
* Pragma Compile_Time_Warning::
* Pragma Compiler_Unit::
* Pragma Complete_Representation::
* Pragma Complex_Representation::
* Pragma Component_Alignment::
* Pragma Convention_Identifier::
* Pragma CPP_Class::
* Pragma CPP_Constructor::
* Pragma CPP_Virtual::
* Pragma CPP_Vtable::
* Pragma Debug::
* Pragma Debug_Policy::
* Pragma Detect_Blocking::
* Pragma Elaboration_Checks::
* Pragma Eliminate::
* Pragma Export_Exception::
* Pragma Export_Function::
* Pragma Export_Object::
* Pragma Export_Procedure::
* Pragma Export_Value::
* Pragma Export_Valued_Procedure::
* Pragma Extend_System::
* Pragma Extensions_Allowed::
* Pragma External::
* Pragma External_Name_Casing::
* Pragma Fast_Math::
* Pragma Favor_Top_Level::
* Pragma Finalize_Storage_Only::
* Pragma Float_Representation::
* Pragma Ident::
* Pragma Implemented::
* Pragma Implicit_Packing::
* Pragma Import_Exception::
* Pragma Import_Function::
* Pragma Import_Object::
* Pragma Import_Procedure::
* Pragma Import_Valued_Procedure::
* Pragma Initialize_Scalars::
* Pragma Inline_Always::
* Pragma Inline_Generic::
* Pragma Interface::
* Pragma Interface_Name::
* Pragma Interrupt_Handler::
* Pragma Interrupt_State::
* Pragma Invariant::
* Pragma Keep_Names::
* Pragma License::
* Pragma Link_With::
* Pragma Linker_Alias::
* Pragma Linker_Constructor::
* Pragma Linker_Destructor::
* Pragma Linker_Section::
* Pragma Long_Float::
* Pragma Machine_Attribute::
* Pragma Main::
* Pragma Main_Storage::
* Pragma No_Body::
* Pragma No_Return::
* Pragma No_Strict_Aliasing ::
* Pragma Normalize_Scalars::
* Pragma Obsolescent::
* Pragma Optimize_Alignment::
* Pragma Ordered::
* Pragma Passive::
* Pragma Persistent_BSS::
* Pragma Polling::
* Pragma Postcondition::
* Pragma Precondition::
* Pragma Profile (Ravenscar)::
* Pragma Profile (Restricted)::
* Pragma Psect_Object::
* Pragma Pure_Function::
* Pragma Remote_Access_Type::
* Pragma Restriction_Warnings::
* Pragma Shared::
* Pragma Short_Circuit_And_Or::
* Pragma Short_Descriptors::
* Pragma Simple_Storage_Pool_Type::
* Pragma Source_File_Name::
* Pragma Source_File_Name_Project::
* Pragma Source_Reference::
* Pragma Static_Elaboration_Desired::
* Pragma Stream_Convert::
* Pragma Style_Checks::
* Pragma Subtitle::
* Pragma Suppress::
* Pragma Suppress_All::
* Pragma Suppress_Exception_Locations::
* Pragma Suppress_Initialization::
* Pragma Task_Info::
* Pragma Task_Name::
* Pragma Task_Storage::
* Pragma Test_Case::
* Pragma Thread_Local_Storage::
* Pragma Time_Slice::
* Pragma Title::
* Pragma Unchecked_Union::
* Pragma Unimplemented_Unit::
* Pragma Universal_Aliasing ::
* Pragma Universal_Data::
* Pragma Unmodified::
* Pragma Unreferenced::
* Pragma Unreferenced_Objects::
* Pragma Unreserve_All_Interrupts::
* Pragma Unsuppress::
* Pragma Use_VADS_Size::
* Pragma Validity_Checks::
* Pragma Volatile::
* Pragma Warnings::
* Pragma Weak_External::
* Pragma Wide_Character_Encoding::

Implementation Defined Attributes

* Abort_Signal::
* Address_Size::
* Asm_Input::
* Asm_Output::
* AST_Entry::
* Bit::
* Bit_Position::
* Compiler_Version::
* Code_Address::
* Default_Bit_Order::
* Descriptor_Size::
* Elaborated::
* Elab_Body::
* Elab_Spec::
* Elab_Subp_Body::
* Emax::
* Enabled::
* Enum_Rep::
* Enum_Val::
* Epsilon::
* Fixed_Value::
* Has_Access_Values::
* Has_Discriminants::
* Img::
* Integer_Value::
* Invalid_Value::
* Large::
* Machine_Size::
* Mantissa::
* Max_Interrupt_Priority::
* Max_Priority::
* Maximum_Alignment::
* Mechanism_Code::
* Null_Parameter::
* Object_Size::
* Old::
* Passed_By_Reference::
* Pool_Address::
* Range_Length::
* Result::
* Safe_Emax::
* Safe_Large::
* Simple_Storage_Pool::
* Small::
* Storage_Unit::
* Stub_Type::
* System_Allocator_Alignment::
* Target_Name::
* Tick::
* To_Address::
* Type_Class::
* UET_Address::
* Unconstrained_Array::
* Universal_Literal_String::
* Unrestricted_Access::
* VADS_Size::
* Value_Size::
* Wchar_T_Size::
* Word_Size::

Implementation Defined Restrictions

* Partition-Wide Restrictions::
* Program Unit Level Restrictions::

Partition-Wide Restrictions

* Immediate_Reclamation::
* Max_Asynchronous_Select_Nesting::
* Max_Entry_Queue_Length::
* Max_Protected_Entries::
* Max_Select_Alternatives::
* Max_Storage_At_Blocking::
* Max_Task_Entries::
* Max_Tasks::
* No_Abort_Statements::
* No_Access_Parameter_Allocators::
* No_Access_Subprograms::
* No_Allocators::
* No_Anonymous_Allocators::
* No_Calendar::
* No_Coextensions::
* No_Default_Initialization::
* No_Delay::
* No_Dependence::
* No_Direct_Boolean_Operators::
* No_Dispatch::
* No_Dispatching_Calls::
* No_Dynamic_Attachment::
* No_Dynamic_Priorities::
* No_Entry_Calls_In_Elaboration_Code::
* No_Enumeration_Maps::
* No_Exception_Handlers::
* No_Exception_Propagation::
* No_Exception_Registration::
* No_Exceptions::
* No_Finalization::
* No_Fixed_Point::
* No_Floating_Point::
* No_Implicit_Conditionals::
* No_Implicit_Dynamic_Code::
* No_Implicit_Heap_Allocations::
* No_Implicit_Loops::
* No_Initialize_Scalars::
* No_IO::
* No_Local_Allocators::
* No_Local_Protected_Objects::
* No_Local_Timing_Events::
* No_Nested_Finalization::
* No_Protected_Type_Allocators::
* No_Protected_Types::
* No_Recursion::
* No_Reentrancy::
* No_Relative_Delay::
* No_Requeue_Statements::
* No_Secondary_Stack::
* No_Select_Statements::
* No_Specific_Termination_Handlers::
* No_Specification_of_Aspect::
* No_Standard_Allocators_After_Elaboration::
* No_Standard_Storage_Pools::
* No_Stream_Optimizations::
* No_Streams::
* No_Task_Allocators::
* No_Task_Attributes_Package::
* No_Task_Hierarchy::
* No_Task_Termination::
* No_Tasking::
* No_Terminate_Alternatives::
* No_Unchecked_Access::
* Simple_Barriers::
* Static_Priorities::
* Static_Storage_Size::

Program Unit Level Restrictions

* No_Elaboration_Code::
* No_Entry_Queue::
* No_Implementation_Aspect_Specifications::
* No_Implementation_Attributes::
* No_Implementation_Identifiers::
* No_Implementation_Pragmas::
* No_Implementation_Restrictions::
* No_Implementation_Units::
* No_Implicit_Aliasing::
* No_Obsolescent_Features::
* No_Wide_Characters::
* SPARK::

The Implementation of Standard I/O

* Standard I/O Packages::
* FORM Strings::
* Direct_IO::
* Sequential_IO::
* Text_IO::
* Wide_Text_IO::
* Wide_Wide_Text_IO::
* Stream_IO::
* Text Translation::
* Shared Files::
* Filenames encoding::
* Open Modes::
* Operations on C Streams::
* Interfacing to C Streams::

The GNAT Library

* Ada.Characters.Latin_9 (a-chlat9.ads)::
* Ada.Characters.Wide_Latin_1 (a-cwila1.ads)::
* Ada.Characters.Wide_Latin_9 (a-cwila9.ads)::
* Ada.Characters.Wide_Wide_Latin_1 (a-chzla1.ads)::
* Ada.Characters.Wide_Wide_Latin_9 (a-chzla9.ads)::
* Ada.Containers.Formal_Doubly_Linked_Lists (a-cfdlli.ads)::
* Ada.Containers.Formal_Hashed_Maps (a-cfhama.ads)::
* Ada.Containers.Formal_Hashed_Sets (a-cfhase.ads)::
* Ada.Containers.Formal_Ordered_Maps (a-cforma.ads)::
* Ada.Containers.Formal_Ordered_Sets (a-cforse.ads)::
* Ada.Containers.Formal_Vectors (a-cofove.ads)::
* Ada.Command_Line.Environment (a-colien.ads)::
* Ada.Command_Line.Remove (a-colire.ads)::
* Ada.Command_Line.Response_File (a-clrefi.ads)::
* Ada.Direct_IO.C_Streams (a-diocst.ads)::
* Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads)::
* Ada.Exceptions.Last_Chance_Handler (a-elchha.ads)::
* Ada.Exceptions.Traceback (a-exctra.ads)::
* Ada.Sequential_IO.C_Streams (a-siocst.ads)::
* Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads)::
* Ada.Strings.Unbounded.Text_IO (a-suteio.ads)::
* Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads)::
* Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads)::
* Ada.Text_IO.C_Streams (a-tiocst.ads)::
* Ada.Text_IO.Reset_Standard_Files (a-tirsfi.ads)::
* Ada.Wide_Characters.Unicode (a-wichun.ads)::
* Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads)::
* Ada.Wide_Text_IO.Reset_Standard_Files (a-wrstfi.ads)::
* Ada.Wide_Wide_Characters.Unicode (a-zchuni.ads)::
* Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads)::
* Ada.Wide_Wide_Text_IO.Reset_Standard_Files (a-zrstfi.ads)::
* GNAT.Altivec (g-altive.ads)::
* GNAT.Altivec.Conversions (g-altcon.ads)::
* GNAT.Altivec.Vector_Operations (g-alveop.ads)::
* GNAT.Altivec.Vector_Types (g-alvety.ads)::
* GNAT.Altivec.Vector_Views (g-alvevi.ads)::
* GNAT.Array_Split (g-arrspl.ads)::
* GNAT.AWK (g-awk.ads)::
* GNAT.Bounded_Buffers (g-boubuf.ads)::
* GNAT.Bounded_Mailboxes (g-boumai.ads)::
* GNAT.Bubble_Sort (g-bubsor.ads)::
* GNAT.Bubble_Sort_A (g-busora.ads)::
* GNAT.Bubble_Sort_G (g-busorg.ads)::
* GNAT.Byte_Order_Mark (g-byorma.ads)::
* GNAT.Byte_Swapping (g-bytswa.ads)::
* GNAT.Calendar (g-calend.ads)::
* GNAT.Calendar.Time_IO (g-catiio.ads)::
* GNAT.Case_Util (g-casuti.ads)::
* GNAT.CGI (g-cgi.ads)::
* GNAT.CGI.Cookie (g-cgicoo.ads)::
* GNAT.CGI.Debug (g-cgideb.ads)::
* GNAT.Command_Line (g-comlin.ads)::
* GNAT.Compiler_Version (g-comver.ads)::
* GNAT.Ctrl_C (g-ctrl_c.ads)::
* GNAT.CRC32 (g-crc32.ads)::
* GNAT.Current_Exception (g-curexc.ads)::
* GNAT.Debug_Pools (g-debpoo.ads)::
* GNAT.Debug_Utilities (g-debuti.ads)::
* GNAT.Decode_String (g-decstr.ads)::
* GNAT.Decode_UTF8_String (g-deutst.ads)::
* GNAT.Directory_Operations (g-dirope.ads)::
* GNAT.Directory_Operations.Iteration (g-diopit.ads)::
* GNAT.Dynamic_HTables (g-dynhta.ads)::
* GNAT.Dynamic_Tables (g-dyntab.ads)::
* GNAT.Encode_String (g-encstr.ads)::
* GNAT.Encode_UTF8_String (g-enutst.ads)::
* GNAT.Exception_Actions (g-excact.ads)::
* GNAT.Exception_Traces (g-exctra.ads)::
* GNAT.Exceptions (g-except.ads)::
* GNAT.Expect (g-expect.ads)::
* GNAT.Expect.TTY (g-exptty.ads)::
* GNAT.Float_Control (g-flocon.ads)::
* GNAT.Heap_Sort (g-heasor.ads)::
* GNAT.Heap_Sort_A (g-hesora.ads)::
* GNAT.Heap_Sort_G (g-hesorg.ads)::
* GNAT.HTable (g-htable.ads)::
* GNAT.IO (g-io.ads)::
* GNAT.IO_Aux (g-io_aux.ads)::
* GNAT.Lock_Files (g-locfil.ads)::
* GNAT.MBBS_Discrete_Random (g-mbdira.ads)::
* GNAT.MBBS_Float_Random (g-mbflra.ads)::
* GNAT.MD5 (g-md5.ads)::
* GNAT.Memory_Dump (g-memdum.ads)::
* GNAT.Most_Recent_Exception (g-moreex.ads)::
* GNAT.OS_Lib (g-os_lib.ads)::
* GNAT.Perfect_Hash_Generators (g-pehage.ads)::
* GNAT.Random_Numbers (g-rannum.ads)::
* GNAT.Regexp (g-regexp.ads)::
* GNAT.Registry (g-regist.ads)::
* GNAT.Regpat (g-regpat.ads)::
* GNAT.Secondary_Stack_Info (g-sestin.ads)::
* GNAT.Semaphores (g-semaph.ads)::
* GNAT.Serial_Communications (g-sercom.ads)::
* GNAT.SHA1 (g-sha1.ads)::
* GNAT.SHA224 (g-sha224.ads)::
* GNAT.SHA256 (g-sha256.ads)::
* GNAT.SHA384 (g-sha384.ads)::
* GNAT.SHA512 (g-sha512.ads)::
* GNAT.Signals (g-signal.ads)::
* GNAT.Sockets (g-socket.ads)::
* GNAT.Source_Info (g-souinf.ads)::
* GNAT.Spelling_Checker (g-speche.ads)::
* GNAT.Spelling_Checker_Generic (g-spchge.ads)::
* GNAT.Spitbol.Patterns (g-spipat.ads)::
* GNAT.Spitbol (g-spitbo.ads)::
* GNAT.Spitbol.Table_Boolean (g-sptabo.ads)::
* GNAT.Spitbol.Table_Integer (g-sptain.ads)::
* GNAT.Spitbol.Table_VString (g-sptavs.ads)::
* GNAT.SSE (g-sse.ads)::
* GNAT.SSE.Vector_Types (g-ssvety.ads)::
* GNAT.Strings (g-string.ads)::
* GNAT.String_Split (g-strspl.ads)::
* GNAT.Table (g-table.ads)::
* GNAT.Task_Lock (g-tasloc.ads)::
* GNAT.Threads (g-thread.ads)::
* GNAT.Time_Stamp (g-timsta.ads)::
* GNAT.Traceback (g-traceb.ads)::
* GNAT.Traceback.Symbolic (g-trasym.ads)::
* GNAT.UTF_32 (g-utf_32.ads)::
* GNAT.UTF_32_Spelling_Checker (g-u3spch.ads)::
* GNAT.Wide_Spelling_Checker (g-wispch.ads)::
* GNAT.Wide_String_Split (g-wistsp.ads)::
* GNAT.Wide_Wide_Spelling_Checker (g-zspche.ads)::
* GNAT.Wide_Wide_String_Split (g-zistsp.ads)::
* Interfaces.C.Extensions (i-cexten.ads)::
* Interfaces.C.Streams (i-cstrea.ads)::
* Interfaces.CPP (i-cpp.ads)::
* Interfaces.Packed_Decimal (i-pacdec.ads)::
* Interfaces.VxWorks (i-vxwork.ads)::
* Interfaces.VxWorks.IO (i-vxwoio.ads)::
* System.Address_Image (s-addima.ads)::
* System.Assertions (s-assert.ads)::
* System.Memory (s-memory.ads)::
* System.Partition_Interface (s-parint.ads)::
* System.Pool_Global (s-pooglo.ads)::
* System.Pool_Local (s-pooloc.ads)::
* System.Restrictions (s-restri.ads)::
* System.Rident (s-rident.ads)::
* System.Strings.Stream_Ops (s-ststop.ads)::
* System.Task_Info (s-tasinf.ads)::
* System.Wch_Cnv (s-wchcnv.ads)::
* System.Wch_Con (s-wchcon.ads)::

Text_IO

* Text_IO Stream Pointer Positioning::
* Text_IO Reading and Writing Non-Regular Files::
* Get_Immediate::
* Treating Text_IO Files as Streams::
* Text_IO Extensions::
* Text_IO Facilities for Unbounded Strings::

Wide_Text_IO

* Wide_Text_IO Stream Pointer Positioning::
* Wide_Text_IO Reading and Writing Non-Regular Files::

Wide_Wide_Text_IO

* Wide_Wide_Text_IO Stream Pointer Positioning::
* Wide_Wide_Text_IO Reading and Writing Non-Regular Files::

Interfacing to Other Languages

* Interfacing to C::
* Interfacing to C++::
* Interfacing to COBOL::
* Interfacing to Fortran::
* Interfacing to non-GNAT Ada code::

Specialized Needs Annexes

Implementation of Specific Ada Features
* Machine Code Insertions::
* GNAT Implementation of Tasking::
* GNAT Implementation of Shared Passive Packages::
* Code Generation for Array Aggregates::
* The Size of Discriminated Records with Default Discriminants::
* Strict Conformance to the Ada Reference Manual::

Implementation of Ada 2012 Features

Obsolescent Features

GNU Free Documentation License

Index


File: gnat_rm.info,  Node: About This Guide,  Next: Implementation Defined Pragmas,  Prev: Top,  Up: Top

About This Guide
****************

This manual contains useful information in writing programs using the
GNAT compiler.  It includes information on implementation dependent
characteristics of GNAT, including all the information required by
Annex M of the Ada language standard.

   GNAT implements Ada 95 and Ada 2005, and it may also be invoked in
Ada 83 compatibility mode.  By default, GNAT assumes
Ada 2005, but you can override with a compiler switch to explicitly
specify the language version.  (Please refer to *Note Compiling
Different Versions of Ada: (gnat_ugn)Compiling Different Versions of
Ada, for details on these switches.)  Throughout this manual,
references to "Ada" without a year suffix apply to both the Ada 95 and
Ada 2005 versions of the language.

   Ada is designed to be highly portable.  In general, a program will
have the same effect even when compiled by different compilers on
different platforms.  However, since Ada is designed to be used in a
wide variety of applications, it also contains a number of system
dependent features to be used in interfacing to the external world.  

   Note: Any program that makes use of implementation-dependent features
may be non-portable.  You should follow good programming practice and
isolate and clearly document any sections of your program that make use
of these features in a non-portable manner.

* Menu:

* What This Reference Manual Contains::
* Conventions::
* Related Information::


File: gnat_rm.info,  Node: What This Reference Manual Contains,  Next: Conventions,  Up: About This Guide

What This Reference Manual Contains
===================================

This reference manual contains the following chapters:

   * *Note Implementation Defined Pragmas::, lists GNAT
     implementation-dependent pragmas, which can be used to extend and
     enhance the functionality of the compiler.

   * *Note Implementation Defined Attributes::, lists GNAT
     implementation-dependent attributes, which can be used to extend
     and enhance the functionality of the compiler.

   * *Note Implementation Defined Restrictions::, lists GNAT
     implementation-dependent restrictions, which can be used to extend
     and enhance the functionality of the compiler.

   * *Note Implementation Advice::, provides information on generally
     desirable behavior which are not requirements that all compilers
     must follow since it cannot be provided on all systems, or which
     may be undesirable on some systems.

   * *Note Implementation Defined Characteristics::, provides a guide to
     minimizing implementation dependent features.

   * *Note Intrinsic Subprograms::, describes the intrinsic subprograms
     implemented by GNAT, and how they can be imported into user
     application programs.

   * *Note Representation Clauses and Pragmas::, describes in detail the
     way that GNAT represents data, and in particular the exact set of
     representation clauses and pragmas that is accepted.

   * *Note Standard Library Routines::, provides a listing of packages
     and a brief description of the functionality that is provided by
     Ada's extensive set of standard library routines as implemented by
     GNAT.

   * *Note The Implementation of Standard I/O::, details how the GNAT
     implementation of the input-output facilities.

   * *Note The GNAT Library::, is a catalog of packages that complement
     the Ada predefined library.

   * *Note Interfacing to Other Languages::, describes how programs
     written in Ada using GNAT can be interfaced to other programming
     languages.

     *Note Specialized Needs Annexes::, describes the GNAT
     implementation of all of the specialized needs annexes.

   * *Note Implementation of Specific Ada Features::, discusses issues
     related to GNAT's implementation of machine code insertions,
     tasking, and several other features.

   * *Note Implementation of Ada 2012 Features::, describes the status
     of the GNAT implementation of the Ada 2012 language standard.

   * *Note Obsolescent Features:: documents implementation dependent
     features, including pragmas and attributes, which are considered
     obsolescent, since there are other preferred ways of achieving the
     same results. These obsolescent forms are retained for backwards
     compatibility.


This reference manual assumes a basic familiarity with the Ada 95
language, as described in the International Standard
ANSI/ISO/IEC-8652:1995, January 1995.  It does not require knowledge of
the new features introduced by Ada 2005, (officially known as ISO/IEC
8652:1995 with Technical Corrigendum 1 and Amendment 1).  Both
reference manuals are included in the GNAT documentation package.


File: gnat_rm.info,  Node: Conventions,  Next: Related Information,  Prev: What This Reference Manual Contains,  Up: About This Guide

Conventions
===========

Following are examples of the typographical and graphic conventions used
in this guide:

   * `Functions', `utility program names', `standard names', and
     `classes'.

   * `Option flags'

   * `File names', `button names', and `field names'.

   * `Variables', `environment variables', and METASYNTACTIC VARIABLES.

   * _Emphasis_.

   * [optional information or parameters]

   * Examples are described by text
          and then shown this way.

Commands that are entered by the user are preceded in this manual by the
characters `$ ' (dollar sign followed by space).  If your system uses
this sequence as a prompt, then the commands will appear exactly as you
see them in the manual.  If your system uses some other prompt, then
the command will appear with the `$' replaced by whatever prompt
character you are using.


File: gnat_rm.info,  Node: Related Information,  Prev: Conventions,  Up: About This Guide

Related Information
===================

See the following documents for further information on GNAT:

   * *Note GNAT User's Guide: (gnat_ugn)Top, which provides information
     on how to use the GNAT compiler system.

   * `Ada 95 Reference Manual', which contains all reference material
     for the Ada 95 programming language.

   * `Ada 95 Annotated Reference Manual', which is an annotated version
     of the Ada 95 standard.  The annotations describe detailed aspects
     of the design decision, and in particular contain useful sections
     on Ada 83 compatibility.

   * `Ada 2005 Reference Manual', which contains all reference material
     for the Ada 2005 programming language.

   * `Ada 2005 Annotated Reference Manual', which is an annotated
     version of the Ada 2005 standard.  The annotations describe
     detailed aspects of the design decision, and in particular contain
     useful sections on Ada 83 and Ada 95 compatibility.

   * `DEC Ada, Technical Overview and Comparison on DIGITAL Platforms',
     which contains specific information on compatibility between GNAT
     and DEC Ada 83 systems.

   * `DEC Ada, Language Reference Manual, part number AA-PYZAB-TK' which
     describes in detail the pragmas and attributes provided by the DEC
     Ada 83 compiler system.



File: gnat_rm.info,  Node: Implementation Defined Pragmas,  Next: Implementation Defined Attributes,  Prev: About This Guide,  Up: Top

1 Implementation Defined Pragmas
********************************

Ada defines a set of pragmas that can be used to supply additional
information to the compiler.  These language defined pragmas are
implemented in GNAT and work as described in the Ada Reference Manual.

   In addition, Ada allows implementations to define additional pragmas
whose meaning is defined by the implementation.  GNAT provides a number
of these implementation-defined pragmas, which can be used to extend
and enhance the functionality of the compiler.  This section of the GNAT
Reference Manual describes these additional pragmas.

   Note that any program using these pragmas might not be portable to
other compilers (although GNAT implements this set of pragmas on all
platforms).  Therefore if portability to other compilers is an important
consideration, the use of these pragmas should be minimized.

* Menu:

* Pragma Abort_Defer::
* Pragma Ada_83::
* Pragma Ada_95::
* Pragma Ada_05::
* Pragma Ada_2005::
* Pragma Ada_12::
* Pragma Ada_2012::
* Pragma Annotate::
* Pragma Assert::
* Pragma Assertion_Policy::
* Pragma Assume_No_Invalid_Values::
* Pragma Ast_Entry::
* Pragma C_Pass_By_Copy::
* Pragma Check::
* Pragma Check_Name::
* Pragma Check_Policy::
* Pragma Comment::
* Pragma Common_Object::
* Pragma Compile_Time_Error::
* Pragma Compile_Time_Warning::
* Pragma Compiler_Unit::
* Pragma Complete_Representation::
* Pragma Complex_Representation::
* Pragma Component_Alignment::
* Pragma Convention_Identifier::
* Pragma CPP_Class::
* Pragma CPP_Constructor::
* Pragma CPP_Virtual::
* Pragma CPP_Vtable::
* Pragma Debug::
* Pragma Debug_Policy::
* Pragma Detect_Blocking::
* Pragma Elaboration_Checks::
* Pragma Eliminate::
* Pragma Export_Exception::
* Pragma Export_Function::
* Pragma Export_Object::
* Pragma Export_Procedure::
* Pragma Export_Value::
* Pragma Export_Valued_Procedure::
* Pragma Extend_System::
* Pragma Extensions_Allowed::
* Pragma External::
* Pragma External_Name_Casing::
* Pragma Fast_Math::
* Pragma Favor_Top_Level::
* Pragma Finalize_Storage_Only::
* Pragma Float_Representation::
* Pragma Ident::
* Pragma Implemented::
* Pragma Implicit_Packing::
* Pragma Import_Exception::
* Pragma Import_Function::
* Pragma Import_Object::
* Pragma Import_Procedure::
* Pragma Import_Valued_Procedure::
* Pragma Initialize_Scalars::
* Pragma Inline_Always::
* Pragma Inline_Generic::
* Pragma Interface::
* Pragma Interface_Name::
* Pragma Interrupt_Handler::
* Pragma Interrupt_State::
* Pragma Invariant::
* Pragma Keep_Names::
* Pragma License::
* Pragma Link_With::
* Pragma Linker_Alias::
* Pragma Linker_Constructor::
* Pragma Linker_Destructor::
* Pragma Linker_Section::
* Pragma Long_Float::
* Pragma Machine_Attribute::
* Pragma Main::
* Pragma Main_Storage::
* Pragma No_Body::
* Pragma No_Return::
* Pragma No_Strict_Aliasing::
* Pragma Normalize_Scalars::
* Pragma Obsolescent::
* Pragma Optimize_Alignment::
* Pragma Ordered::
* Pragma Passive::
* Pragma Persistent_BSS::
* Pragma Polling::
* Pragma Postcondition::
* Pragma Precondition::
* Pragma Profile (Ravenscar)::
* Pragma Profile (Restricted)::
* Pragma Psect_Object::
* Pragma Pure_Function::
* Pragma Remote_Access_Type::
* Pragma Restriction_Warnings::
* Pragma Shared::
* Pragma Short_Circuit_And_Or::
* Pragma Short_Descriptors::
* Pragma Simple_Storage_Pool_Type::
* Pragma Source_File_Name::
* Pragma Source_File_Name_Project::
* Pragma Source_Reference::
* Pragma Static_Elaboration_Desired::
* Pragma Stream_Convert::
* Pragma Style_Checks::
* Pragma Subtitle::
* Pragma Suppress::
* Pragma Suppress_All::
* Pragma Suppress_Exception_Locations::
* Pragma Suppress_Initialization::
* Pragma Task_Info::
* Pragma Task_Name::
* Pragma Task_Storage::
* Pragma Test_Case::
* Pragma Thread_Local_Storage::
* Pragma Time_Slice::
* Pragma Title::
* Pragma Unchecked_Union::
* Pragma Unimplemented_Unit::
* Pragma Universal_Aliasing ::
* Pragma Universal_Data::
* Pragma Unmodified::
* Pragma Unreferenced::
* Pragma Unreferenced_Objects::
* Pragma Unreserve_All_Interrupts::
* Pragma Unsuppress::
* Pragma Use_VADS_Size::
* Pragma Validity_Checks::
* Pragma Volatile::
* Pragma Warnings::
* Pragma Weak_External::
* Pragma Wide_Character_Encoding::


File: gnat_rm.info,  Node: Pragma Abort_Defer,  Next: Pragma Ada_83,  Up: Implementation Defined Pragmas

Pragma Abort_Defer
==================

Syntax:
     pragma Abort_Defer;

This pragma must appear at the start of the statement sequence of a
handled sequence of statements (right after the `begin').  It has the
effect of deferring aborts for the sequence of statements (but not for
the declarations or handlers, if any, associated with this statement
sequence).


File: gnat_rm.info,  Node: Pragma Ada_83,  Next: Pragma Ada_95,  Prev: Pragma Abort_Defer,  Up: Implementation Defined Pragmas

Pragma Ada_83
=============

Syntax:
     pragma Ada_83;

A configuration pragma that establishes Ada 83 mode for the unit to
which it applies, regardless of the mode set by the command line
switches.  In Ada 83 mode, GNAT attempts to be as compatible with the
syntax and semantics of Ada 83, as defined in the original Ada 83
Reference Manual as possible.  In particular, the keywords added by Ada
95 and Ada 2005 are not recognized, optional package bodies are allowed,
and generics may name types with unknown discriminants without using
the `(<>)' notation.  In addition, some but not all of the additional
restrictions of Ada 83 are enforced.

   Ada 83 mode is intended for two purposes.  Firstly, it allows
existing Ada 83 code to be compiled and adapted to GNAT with less
effort.  Secondly, it aids in keeping code backwards compatible with
Ada 83.  However, there is no guarantee that code that is processed
correctly by GNAT in Ada 83 mode will in fact compile and execute with
an Ada 83 compiler, since GNAT does not enforce all the additional
checks required by Ada 83.


File: gnat_rm.info,  Node: Pragma Ada_95,  Next: Pragma Ada_05,  Prev: Pragma Ada_83,  Up: Implementation Defined Pragmas

Pragma Ada_95
=============

Syntax:
     pragma Ada_95;

A configuration pragma that establishes Ada 95 mode for the unit to
which it applies, regardless of the mode set by the command line
switches.  This mode is set automatically for the `Ada' and `System'
packages and their children, so you need not specify it in these
contexts.  This pragma is useful when writing a reusable component that
itself uses Ada 95 features, but which is intended to be usable from
either Ada 83 or Ada 95 programs.


File: gnat_rm.info,  Node: Pragma Ada_05,  Next: Pragma Ada_2005,  Prev: Pragma Ada_95,  Up: Implementation Defined Pragmas

Pragma Ada_05
=============

Syntax:
     pragma Ada_05;

A configuration pragma that establishes Ada 2005 mode for the unit to
which it applies, regardless of the mode set by the command line
switches.  This pragma is useful when writing a reusable component that
itself uses Ada 2005 features, but which is intended to be usable from
either Ada 83 or Ada 95 programs.


File: gnat_rm.info,  Node: Pragma Ada_2005,  Next: Pragma Ada_12,  Prev: Pragma Ada_05,  Up: Implementation Defined Pragmas

Pragma Ada_2005
===============

Syntax:
     pragma Ada_2005;

This configuration pragma is a synonym for pragma Ada_05 and has the
same syntax and effect.


File: gnat_rm.info,  Node: Pragma Ada_12,  Next: Pragma Ada_2012,  Prev: Pragma Ada_2005,  Up: Implementation Defined Pragmas

Pragma Ada_12
=============

Syntax:
     pragma Ada_12;

A configuration pragma that establishes Ada 2012 mode for the unit to
which it applies, regardless of the mode set by the command line
switches.  This mode is set automatically for the `Ada' and `System'
packages and their children, so you need not specify it in these
contexts.  This pragma is useful when writing a reusable component that
itself uses Ada 2012 features, but which is intended to be usable from
Ada 83, Ada 95, or Ada 2005 programs.


File: gnat_rm.info,  Node: Pragma Ada_2012,  Next: Pragma Annotate,  Prev: Pragma Ada_12,  Up: Implementation Defined Pragmas

Pragma Ada_2012
===============

Syntax:
     pragma Ada_2012;

This configuration pragma is a synonym for pragma Ada_12 and has the
same syntax and effect.


File: gnat_rm.info,  Node: Pragma Annotate,  Next: Pragma Assert,  Prev: Pragma Ada_2012,  Up: Implementation Defined Pragmas

Pragma Annotate
===============

Syntax:
     pragma Annotate (IDENTIFIER [,IDENTIFIER {, ARG}]);

     ARG ::= NAME | EXPRESSION

This pragma is used to annotate programs.  IDENTIFIER identifies the
type of annotation.  GNAT verifies that it is an identifier, but does
not otherwise analyze it. The second optional identifier is also left
unanalyzed, and by convention is used to control the action of the tool
to which the annotation is addressed.  The remaining ARG arguments can
be either string literals or more generally expressions.  String
literals are assumed to be either of type `Standard.String' or else
`Wide_String' or `Wide_Wide_String' depending on the character literals
they contain.  All other kinds of arguments are analyzed as
expressions, and must be unambiguous.

   The analyzed pragma is retained in the tree, but not otherwise
processed by any part of the GNAT compiler, except to generate
corresponding note lines in the generated ALI file. For the format of
these note lines, see the compiler source file lib-writ.ads. This
pragma is intended for use by external tools, including ASIS. The use
of pragma Annotate does not affect the compilation process in any way.
This pragma may be used as a configuration pragma.


File: gnat_rm.info,  Node: Pragma Assert,  Next: Pragma Assertion_Policy,  Prev: Pragma Annotate,  Up: Implementation Defined Pragmas

Pragma Assert
=============

Syntax:
     pragma Assert (
       boolean_EXPRESSION
       [, string_EXPRESSION]);

The effect of this pragma depends on whether the corresponding command
line switch is set to activate assertions.  The pragma expands into code
equivalent to the following:

     if assertions-enabled then
        if not boolean_EXPRESSION then
           System.Assertions.Raise_Assert_Failure
             (string_EXPRESSION);
        end if;
     end if;

The string argument, if given, is the message that will be associated
with the exception occurrence if the exception is raised.  If no second
argument is given, the default message is `FILE:NNN', where FILE is the
name of the source file containing the assert, and NNN is the line
number of the assert.  A pragma is not a statement, so if a statement
sequence contains nothing but a pragma assert, then a null statement is
required in addition, as in:

     ...
     if J > 3 then
        pragma Assert (K > 3, "Bad value for K");
        null;
     end if;

Note that, as with the `if' statement to which it is equivalent, the
type of the expression is either `Standard.Boolean', or any type derived
from this standard type.

   If assertions are disabled (switch `-gnata' not used), then there is
no run-time effect (and in particular, any side effects from the
expression will not occur at run time).  (The expression is still
analyzed at compile time, and may cause types to be frozen if they are
mentioned here for the first time).

   If assertions are enabled, then the given expression is tested, and
if it is `False' then `System.Assertions.Raise_Assert_Failure' is called
which results in the raising of `Assert_Failure' with the given message.

   You should generally avoid side effects in the expression arguments
of this pragma, because these side effects will turn on and off with the
setting of the assertions mode, resulting in assertions that have an
effect on the program.  However, the expressions are analyzed for
semantic correctness whether or not assertions are enabled, so turning
assertions on and off cannot affect the legality of a program.

   Note that the implementation defined policy `DISABLE', given in a
pragma Assertion_Policy, can be used to suppress this semantic analysis.

   Note: this is a standard language-defined pragma in versions of Ada
from 2005 on. In GNAT, it is implemented in all versions of Ada, and
the DISABLE policy is an implementation-defined addition.


File: gnat_rm.info,  Node: Pragma Assertion_Policy,  Next: Pragma Assume_No_Invalid_Values,  Prev: Pragma Assert,  Up: Implementation Defined Pragmas

Pragma Assertion_Policy
=======================

Syntax:

     pragma Assertion_Policy (CHECK | DISABLE | IGNORE);

If the argument is `CHECK', then pragma `Assert' is enabled.  If the
argument is `IGNORE', then pragma `Assert' is ignored.  This pragma
overrides the effect of the `-gnata' switch on the command line.

   The implementation defined policy `DISABLE' is like `IGNORE' except
that it completely disables semantic checking of the argument to
`pragma Assert'. This may be useful when the pragma argument references
subprograms in a with'ed package which is replaced by a dummy package
for the final build.

   Note: this is a standard language-defined pragma in versions of Ada
from 2005 on. In GNAT, it is implemented in all versions of Ada, and
the DISABLE policy is an implementation-defined addition.


File: gnat_rm.info,  Node: Pragma Assume_No_Invalid_Values,  Next: Pragma Ast_Entry,  Prev: Pragma Assertion_Policy,  Up: Implementation Defined Pragmas

Pragma Assume_No_Invalid_Values
===============================

Syntax:
     pragma Assume_No_Invalid_Values (On | Off);

This is a configuration pragma that controls the assumptions made by the
compiler about the occurrence of invalid representations (invalid
values) in the code.

   The default behavior (corresponding to an Off argument for this
pragma), is to assume that values may in general be invalid unless the
compiler can prove they are valid. Consider the following example:

     V1 : Integer range 1 .. 10;
     V2 : Integer range 11 .. 20;
     ...
     for J in V2 .. V1 loop
        ...
     end loop;

if V1 and V2 have valid values, then the loop is known at compile time
not to execute since the lower bound must be greater than the upper
bound. However in default mode, no such assumption is made, and the
loop may execute. If `Assume_No_Invalid_Values (On)' is given, the
compiler will assume that any occurrence of a variable other than in an
explicit `'Valid' test always has a valid value, and the loop above
will be optimized away.

   The use of `Assume_No_Invalid_Values (On)' is appropriate if you
know your code is free of uninitialized variables and other possible
sources of invalid representations, and may result in more efficient
code. A program that accesses an invalid representation with this
pragma in effect is erroneous, so no guarantees can be made about its
behavior.

   It is peculiar though permissible to use this pragma in conjunction
with validity checking (-gnatVa). In such cases, accessing invalid
values will generally give an exception, though formally the program is
erroneous so there are no guarantees that this will always be the case,
and it is recommended that these two options not be used together.


File: gnat_rm.info,  Node: Pragma Ast_Entry,  Next: Pragma C_Pass_By_Copy,  Prev: Pragma Assume_No_Invalid_Values,  Up: Implementation Defined Pragmas

Pragma Ast_Entry
================

Syntax:
     pragma AST_Entry (entry_IDENTIFIER);

This pragma is implemented only in the OpenVMS implementation of GNAT.
The argument is the simple name of a single entry; at most one
`AST_Entry' pragma is allowed for any given entry.  This pragma must be
used in conjunction with the `AST_Entry' attribute, and is only allowed
after the entry declaration and in the same task type specification or
single task as the entry to which it applies.  This pragma specifies
that the given entry may be used to handle an OpenVMS asynchronous
system trap (`AST') resulting from an OpenVMS system service call.  The
pragma does not affect normal use of the entry.  For further details on
this pragma, see the DEC Ada Language Reference Manual, section 9.12a.


File: gnat_rm.info,  Node: Pragma C_Pass_By_Copy,  Next: Pragma Check,  Prev: Pragma Ast_Entry,  Up: Implementation Defined Pragmas

Pragma C_Pass_By_Copy
=====================

Syntax:
     pragma C_Pass_By_Copy
       ([Max_Size =>] static_integer_EXPRESSION);

Normally the default mechanism for passing C convention records to C
convention subprograms is to pass them by reference, as suggested by RM
B.3(69).  Use the configuration pragma `C_Pass_By_Copy' to change this
default, by requiring that record formal parameters be passed by copy
if all of the following conditions are met:

   * The size of the record type does not exceed the value specified for
     `Max_Size'.

   * The record type has `Convention C'.

   * The formal parameter has this record type, and the subprogram has a
     foreign (non-Ada) convention.

If these conditions are met the argument is passed by copy, i.e. in a
manner consistent with what C expects if the corresponding formal in the
C prototype is a struct (rather than a pointer to a struct).

   You can also pass records by copy by specifying the convention
`C_Pass_By_Copy' for the record type, or by using the extended `Import'
and `Export' pragmas, which allow specification of passing mechanisms
on a parameter by parameter basis.


File: gnat_rm.info,  Node: Pragma Check,  Next: Pragma Check_Name,  Prev: Pragma C_Pass_By_Copy,  Up: Implementation Defined Pragmas

Pragma Check
============

Syntax:
     pragma Check (
          [Name    =>] Identifier,
          [Check   =>] Boolean_EXPRESSION
       [, [Message =>] string_EXPRESSION] );

This pragma is similar to the predefined pragma `Assert' except that an
extra identifier argument is present. In conjunction with pragma
`Check_Policy', this can be used to define groups of assertions that can
be independently controlled. The identifier `Assertion' is special, it
refers to the normal set of pragma `Assert' statements. The identifiers
`Precondition' and `Postcondition' correspond to the pragmas of these
names, so these three names would normally not be used directly in a
pragma `Check'.

   Checks introduced by this pragma are normally deactivated by
default. They can be activated either by the command line option
`-gnata', which turns on all checks, or individually controlled using
pragma `Check_Policy'.


File: gnat_rm.info,  Node: Pragma Check_Name,  Next: Pragma Check_Policy,  Prev: Pragma Check,  Up: Implementation Defined Pragmas

Pragma Check_Name
=================

Syntax:
     pragma Check_Name (check_name_IDENTIFIER);

This is a configuration pragma that defines a new implementation
defined check name (unless IDENTIFIER matches one of the predefined
check names, in which case the pragma has no effect). Check names are
global to a partition, so if two or more configuration pragmas are
present in a partition mentioning the same name, only one new check
name is introduced.

   An implementation defined check name introduced with this pragma may
be used in only three contexts: `pragma Suppress', `pragma Unsuppress',
and as the prefix of a `Check_Name'Enabled' attribute reference. For
any of these three cases, the check name must be visible. A check name
is visible if it is in the configuration pragmas applying to the
current unit, or if it appears at the start of any unit that is part of
the dependency set of the current unit (e.g., units that are mentioned
in `with' clauses).


File: gnat_rm.info,  Node: Pragma Check_Policy,  Next: Pragma Comment,  Prev: Pragma Check_Name,  Up: Implementation Defined Pragmas

Pragma Check_Policy
===================

Syntax:
     pragma Check_Policy
      ([Name   =>] Identifier,
       [Policy =>] POLICY_IDENTIFIER);

     POLICY_IDENTIFIER ::= ON | OFF | CHECK | DISABLE | IGNORE

This pragma is similar to the predefined pragma `Assertion_Policy',
except that it controls sets of named assertions introduced using the
`Check' pragmas. It can be used as a configuration pragma or (unlike
`Assertion_Policy') can be used within a declarative part, in which case
it controls the status to the end of the corresponding construct (in a
manner identical to pragma `Suppress)'.

   The identifier given as the first argument corresponds to a name
used in associated `Check' pragmas. For example, if the pragma:

     pragma Check_Policy (Critical_Error, OFF);

is given, then subsequent `Check' pragmas whose first argument is also
`Critical_Error' will be disabled. The special identifier `Assertion'
controls the behavior of normal `Assert' pragmas (thus a pragma
`Check_Policy' with this identifier is similar to the normal
`Assertion_Policy' pragma except that it can appear within a
declarative part).

   The special identifiers `Precondition' and `Postcondition' control
the status of preconditions and postconditions. If a `Precondition'
pragma is encountered, it is ignored if turned off by a `Check_Policy'
specifying that `Precondition' checks are `Off' or `Ignored'. Similarly
use of the name `Postcondition' controls whether `Postcondition' pragmas
are recognized.

   The check policy is `OFF' to turn off corresponding checks, and `ON'
to turn on corresponding checks. The default for a set of checks for
which no `Check_Policy' is given is `OFF' unless the compiler switch
`-gnata' is given, which turns on all checks by default.

   The check policy settings `CHECK' and `IGNORE' are also recognized
as synonyms for `ON' and `OFF'. These synonyms are provided for
compatibility with the standard `Assertion_Policy' pragma.

   The implementation defined policy `DISABLE' is like `OFF' except
that it completely disables semantic checking of the argument to the
corresponding class of pragmas. This may be useful when the pragma
arguments reference subprograms in a with'ed package which is replaced
by a dummy package for the final build.


File: gnat_rm.info,  Node: Pragma Comment,  Next: Pragma Common_Object,  Prev: Pragma Check_Policy,  Up: Implementation Defined Pragmas

Pragma Comment
==============

Syntax:

     pragma Comment (static_string_EXPRESSION);

This is almost identical in effect to pragma `Ident'.  It allows the
placement of a comment into the object file and hence into the
executable file if the operating system permits such usage.  The
difference is that `Comment', unlike `Ident', has no limitations on
placement of the pragma (it can be placed anywhere in the main source
unit), and if more than one pragma is used, all comments are retained.


File: gnat_rm.info,  Node: Pragma Common_Object,  Next: Pragma Compile_Time_Error,  Prev: Pragma Comment,  Up: Implementation Defined Pragmas

Pragma Common_Object
====================

Syntax:

     pragma Common_Object (
          [Internal =>] LOCAL_NAME
       [, [External =>] EXTERNAL_SYMBOL]
       [, [Size     =>] EXTERNAL_SYMBOL] );

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

This pragma enables the shared use of variables stored in overlaid
linker areas corresponding to the use of `COMMON' in Fortran.  The
single object LOCAL_NAME is assigned to the area designated by the
EXTERNAL argument.  You may define a record to correspond to a series
of fields.  The SIZE argument is syntax checked in GNAT, but otherwise
ignored.

   `Common_Object' is not supported on all platforms.  If no support is
available, then the code generator will issue a message indicating that
the necessary attribute for implementation of this pragma is not
available.


File: gnat_rm.info,  Node: Pragma Compile_Time_Error,  Next: Pragma Compile_Time_Warning,  Prev: Pragma Common_Object,  Up: Implementation Defined Pragmas

Pragma Compile_Time_Error
=========================

Syntax:

     pragma Compile_Time_Error
              (boolean_EXPRESSION, static_string_EXPRESSION);

This pragma can be used to generate additional compile time error
messages. It is particularly useful in generics, where errors can be
issued for specific problematic instantiations. The first parameter is
a boolean expression. The pragma is effective only if the value of this
expression is known at compile time, and has the value True. The set of
expressions whose values are known at compile time includes all static
boolean expressions, and also other values which the compiler can
determine at compile time (e.g., the size of a record type set by an
explicit size representation clause, or the value of a variable which
was initialized to a constant and is known not to have been modified).
If these conditions are met, an error message is generated using the
value given as the second argument. This string value may contain
embedded ASCII.LF characters to break the message into multiple lines.


File: gnat_rm.info,  Node: Pragma Compile_Time_Warning,  Next: Pragma Compiler_Unit,  Prev: Pragma Compile_Time_Error,  Up: Implementation Defined Pragmas

Pragma Compile_Time_Warning
===========================

Syntax:

     pragma Compile_Time_Warning
              (boolean_EXPRESSION, static_string_EXPRESSION);

Same as pragma Compile_Time_Error, except a warning is issued instead
of an error message. Note that if this pragma is used in a package that
is with'ed by a client, the client will get the warning even though it
is issued by a with'ed package (normally warnings in with'ed units are
suppressed, but this is a special exception to that rule).

   One typical use is within a generic where compile time known
characteristics of formal parameters are tested, and warnings given
appropriately. Another use with a first parameter of True is to warn a
client about use of a package, for example that it is not fully
implemented.


File: gnat_rm.info,  Node: Pragma Compiler_Unit,  Next: Pragma Complete_Representation,  Prev: Pragma Compile_Time_Warning,  Up: Implementation Defined Pragmas

Pragma Compiler_Unit
====================

Syntax:

     pragma Compiler_Unit;

This pragma is intended only for internal use in the GNAT run-time
library.  It indicates that the unit is used as part of the compiler
build. The effect is to disallow constructs (raise with message,
conditional expressions etc) that would cause trouble when
bootstrapping using an older version of GNAT.  For the exact list of
restrictions, see the compiler sources and references to
Is_Compiler_Unit.


File: gnat_rm.info,  Node: Pragma Complete_Representation,  Next: Pragma Complex_Representation,  Prev: Pragma Compiler_Unit,  Up: Implementation Defined Pragmas

Pragma Complete_Representation
==============================

Syntax:

     pragma Complete_Representation;

This pragma must appear immediately within a record representation
clause. Typical placements are before the first component clause or
after the last component clause. The effect is to give an error message
if any component is missing a component clause. This pragma may be used
to ensure that a record representation clause is complete, and that
this invariant is maintained if fields are added to the record in the
future.


File: gnat_rm.info,  Node: Pragma Complex_Representation,  Next: Pragma Component_Alignment,  Prev: Pragma Complete_Representation,  Up: Implementation Defined Pragmas

Pragma Complex_Representation
=============================

Syntax:

     pragma Complex_Representation
             ([Entity =>] LOCAL_NAME);

The ENTITY argument must be the name of a record type which has two
fields of the same floating-point type.  The effect of this pragma is
to force gcc to use the special internal complex representation form for
this record, which may be more efficient.  Note that this may result in
the code for this type not conforming to standard ABI (application
binary interface) requirements for the handling of record types.  For
example, in some environments, there is a requirement for passing
records by pointer, and the use of this pragma may result in passing
this type in floating-point registers.


File: gnat_rm.info,  Node: Pragma Component_Alignment,  Next: Pragma Convention_Identifier,  Prev: Pragma Complex_Representation,  Up: Implementation Defined Pragmas

Pragma Component_Alignment
==========================

Syntax:

     pragma Component_Alignment (
          [Form =>] ALIGNMENT_CHOICE
       [, [Name =>] type_LOCAL_NAME]);

     ALIGNMENT_CHOICE ::=
       Component_Size
     | Component_Size_4
     | Storage_Unit
     | Default

Specifies the alignment of components in array or record types.  The
meaning of the FORM argument is as follows:

`Component_Size'
     Aligns scalar components and subcomponents of the array or record
     type on boundaries appropriate to their inherent size (naturally
     aligned).  For example, 1-byte components are aligned on byte
     boundaries, 2-byte integer components are aligned on 2-byte
     boundaries, 4-byte integer components are aligned on 4-byte
     boundaries and so on.  These alignment rules correspond to the
     normal rules for C compilers on all machines except the VAX.

`Component_Size_4'
     Naturally aligns components with a size of four or fewer bytes.
     Components that are larger than 4 bytes are placed on the next
     4-byte boundary.

`Storage_Unit'
     Specifies that array or record components are byte aligned, i.e.
     aligned on boundaries determined by the value of the constant
     `System.Storage_Unit'.

`Default'
     Specifies that array or record components are aligned on default
     boundaries, appropriate to the underlying hardware or operating
     system or both.  For OpenVMS VAX systems, the `Default' choice is
     the same as the `Storage_Unit' choice (byte alignment).  For all
     other systems, the `Default' choice is the same as
     `Component_Size' (natural alignment).

If the `Name' parameter is present, TYPE_LOCAL_NAME must refer to a
local record or array type, and the specified alignment choice applies
to the specified type.  The use of `Component_Alignment' together with
a pragma `Pack' causes the `Component_Alignment' pragma to be ignored.
The use of `Component_Alignment' together with a record representation
clause is only effective for fields not specified by the representation
clause.

   If the `Name' parameter is absent, the pragma can be used as either
a configuration pragma, in which case it applies to one or more units in
accordance with the normal rules for configuration pragmas, or it can be
used within a declarative part, in which case it applies to types that
are declared within this declarative part, or within any nested scope
within this declarative part.  In either case it specifies the alignment
to be applied to any record or array type which has otherwise standard
representation.

   If the alignment for a record or array type is not specified (using
pragma `Pack', pragma `Component_Alignment', or a record rep clause),
the GNAT uses the default alignment as described previously.


File: gnat_rm.info,  Node: Pragma Convention_Identifier,  Next: Pragma CPP_Class,  Prev: Pragma Component_Alignment,  Up: Implementation Defined Pragmas

Pragma Convention_Identifier
============================

Syntax:

     pragma Convention_Identifier (
              [Name =>]       IDENTIFIER,
              [Convention =>] convention_IDENTIFIER);

This pragma provides a mechanism for supplying synonyms for existing
convention identifiers. The `Name' identifier can subsequently be used
as a synonym for the given convention in other pragmas (including for
example pragma `Import' or another `Convention_Identifier' pragma). As
an example of the use of this, suppose you had legacy code which used
Fortran77 as the identifier for Fortran. Then the pragma:

     pragma Convention_Identifier (Fortran77, Fortran);

would allow the use of the convention identifier `Fortran77' in
subsequent code, avoiding the need to modify the sources. As another
example, you could use this to parameterize convention requirements
according to systems. Suppose you needed to use `Stdcall' on windows
systems, and `C' on some other system, then you could define a
convention identifier `Library' and use a single
`Convention_Identifier' pragma to specify which convention would be
used system-wide.


File: gnat_rm.info,  Node: Pragma CPP_Class,  Next: Pragma CPP_Constructor,  Prev: Pragma Convention_Identifier,  Up: Implementation Defined Pragmas

Pragma CPP_Class
================

Syntax:

     pragma CPP_Class ([Entity =>] LOCAL_NAME);

The argument denotes an entity in the current declarative region that is
declared as a record type. It indicates that the type corresponds to an
externally declared C++ class type, and is to be laid out the same way
that C++ would lay out the type. If the C++ class has virtual primitives
then the record must be declared as a tagged record type.

   Types for which `CPP_Class' is specified do not have assignment or
equality operators defined (such operations can be imported or declared
as subprograms as required). Initialization is allowed only by
constructor functions (see pragma `CPP_Constructor'). Such types are
implicitly limited if not explicitly declared as limited or derived
from a limited type, and an error is issued in that case.

   Pragma `CPP_Class' is intended primarily for automatic generation
using an automatic binding generator tool.  See *Note Interfacing to
C++:: for related information.

   Note: Pragma `CPP_Class' is currently obsolete. It is supported for
backward compatibility but its functionality is available using pragma
`Import' with `Convention' = `CPP'.


File: gnat_rm.info,  Node: Pragma CPP_Constructor,  Next: Pragma CPP_Virtual,  Prev: Pragma CPP_Class,  Up: Implementation Defined Pragmas

Pragma CPP_Constructor
======================

Syntax:

     pragma CPP_Constructor ([Entity =>] LOCAL_NAME
       [, [External_Name =>] static_string_EXPRESSION ]
       [, [Link_Name     =>] static_string_EXPRESSION ]);

This pragma identifies an imported function (imported in the usual way
with pragma `Import') as corresponding to a C++ constructor. If
`External_Name' and `Link_Name' are not specified then the `Entity'
argument is a name that must have been previously mentioned in a pragma
`Import' with `Convention' = `CPP'. Such name must be of one of the
following forms:

   * `function FNAME return T'

        * `function FNAME return T'Class'

        * `function FNAME (...) return T'

   * `function FNAME (...) return T'Class'

where T is a limited record type imported from C++ with pragma `Import'
and `Convention' = `CPP'.

   The first two forms import the default constructor, used when an
object of type T is created on the Ada side with no explicit
constructor.  The latter two forms cover all the non-default
constructors of the type.  See the GNAT users guide for details.

   If no constructors are imported, it is impossible to create any
objects on the Ada side and the type is implicitly declared abstract.

   Pragma `CPP_Constructor' is intended primarily for automatic
generation using an automatic binding generator tool.  See *Note
Interfacing to C++:: for more related information.

   Note: The use of functions returning class-wide types for
constructors is currently obsolete. They are supported for backward
compatibility. The use of functions returning the type T leave the Ada
sources more clear because the imported C++ constructors always return
an object of type T; that is, they never return an object whose type is
a descendant of type T.


File: gnat_rm.info,  Node: Pragma CPP_Virtual,  Next: Pragma CPP_Vtable,  Prev: Pragma CPP_Constructor,  Up: Implementation Defined Pragmas

Pragma CPP_Virtual
==================

This pragma is now obsolete has has no effect because GNAT generates
the same object layout than the G++ compiler.

   See *Note Interfacing to C++:: for related information.


File: gnat_rm.info,  Node: Pragma CPP_Vtable,  Next: Pragma Debug,  Prev: Pragma CPP_Virtual,  Up: Implementation Defined Pragmas

Pragma CPP_Vtable
=================

This pragma is now obsolete has has no effect because GNAT generates
the same object layout than the G++ compiler.

   See *Note Interfacing to C++:: for related information.


File: gnat_rm.info,  Node: Pragma Debug,  Next: Pragma Debug_Policy,  Prev: Pragma CPP_Vtable,  Up: Implementation Defined Pragmas

Pragma Debug
============

Syntax:

     pragma Debug ([CONDITION, ]PROCEDURE_CALL_WITHOUT_SEMICOLON);

     PROCEDURE_CALL_WITHOUT_SEMICOLON ::=
       PROCEDURE_NAME
     | PROCEDURE_PREFIX ACTUAL_PARAMETER_PART

The procedure call argument has the syntactic form of an expression,
meeting the syntactic requirements for pragmas.

   If debug pragmas are not enabled or if the condition is present and
evaluates to False, this pragma has no effect. If debug pragmas are
enabled, the semantics of the pragma is exactly equivalent to the
procedure call statement corresponding to the argument with a
terminating semicolon. Pragmas are permitted in sequences of
declarations, so you can use pragma `Debug' to intersperse calls to
debug procedures in the middle of declarations. Debug pragmas can be
enabled either by use of the command line switch `-gnata' or by use of
the configuration pragma `Debug_Policy'.


File: gnat_rm.info,  Node: Pragma Debug_Policy,  Next: Pragma Detect_Blocking,  Prev: Pragma Debug,  Up: Implementation Defined Pragmas

Pragma Debug_Policy
===================

Syntax:

     pragma Debug_Policy (CHECK | DISABLE | IGNORE);

If the argument is `CHECK', then pragma `DEBUG' is enabled.  If the
argument is `IGNORE', then pragma `DEBUG' is ignored.  This pragma
overrides the effect of the `-gnata' switch on the command line.

   The implementation defined policy `DISABLE' is like `IGNORE' except
that it completely disables semantic checking of the argument to
`pragma Debug'. This may be useful when the pragma argument references
subprograms in a with'ed package which is replaced by a dummy package
for the final build.


File: gnat_rm.info,  Node: Pragma Detect_Blocking,  Next: Pragma Elaboration_Checks,  Prev: Pragma Debug_Policy,  Up: Implementation Defined Pragmas

Pragma Detect_Blocking
======================

Syntax:

     pragma Detect_Blocking;

This is a configuration pragma that forces the detection of potentially
blocking operations within a protected operation, and to raise
Program_Error if that happens.


File: gnat_rm.info,  Node: Pragma Elaboration_Checks,  Next: Pragma Eliminate,  Prev: Pragma Detect_Blocking,  Up: Implementation Defined Pragmas

Pragma Elaboration_Checks
=========================

Syntax:

     pragma Elaboration_Checks (Dynamic | Static);

This is a configuration pragma that provides control over the
elaboration model used by the compilation affected by the pragma.  If
the parameter is `Dynamic', then the dynamic elaboration model
described in the Ada Reference Manual is used, as though the `-gnatE'
switch had been specified on the command line.  If the parameter is
`Static', then the default GNAT static model is used.  This
configuration pragma overrides the setting of the command line.  For
full details on the elaboration models used by the GNAT compiler, see
*Note Elaboration Order Handling in GNAT: (gnat_ugn)Elaboration Order
Handling in GNAT.


File: gnat_rm.info,  Node: Pragma Eliminate,  Next: Pragma Export_Exception,  Prev: Pragma Elaboration_Checks,  Up: Implementation Defined Pragmas

Pragma Eliminate
================

Syntax:

     pragma Eliminate ([Entity          =>] DEFINING_DESIGNATOR,
                       [Source_Location =>] STRING_LITERAL);

The string literal given for the source location is a string which
specifies the line number of the occurrence of the entity, using the
syntax for SOURCE_TRACE given below:

      SOURCE_TRACE     ::= SOURCE_REFERENCE [LBRACKET SOURCE_TRACE RBRACKET]

      LBRACKET         ::= [
      RBRACKET         ::= ]

      SOURCE_REFERENCE ::= FILE_NAME : LINE_NUMBER

      LINE_NUMBER      ::= DIGIT {DIGIT}

Spaces around the colon in a `Source_Reference' are optional.

   The `DEFINING_DESIGNATOR' matches the defining designator used in an
explicit subprogram declaration, where the `entity' name in this
designator appears on the source line specified by the source location.

   The source trace that is given as the `Source_Location' shall obey
the following rules. The `FILE_NAME' is the short name (with no
directory information) of an Ada source file, given using exactly the
required syntax for the underlying file system (e.g. case is important
if the underlying operating system is case sensitive). `LINE_NUMBER'
gives the line number of the occurrence of the `entity' as a decimal
literal without an exponent or point. If an `entity' is not declared in
a generic instantiation (this includes generic subprogram instances),
the source trace includes only one source reference. If an entity is
declared inside a generic instantiation, its source trace (when parsing
from left to right) starts with the source location of the declaration
of the entity in the generic unit and ends with the source location of
the instantiation (it is given in square brackets). This approach is
recursively used in case of nested instantiations: the rightmost
(nested most deeply in square brackets) element of the source trace is
the location of the outermost instantiation, the next to left element
is the location of the next (first nested) instantiation in the code of
the corresponding generic unit, and so on, and the leftmost element
(that is out of any square brackets) is the location of the declaration
of the entity to eliminate in a generic unit.

   Note that the `Source_Location' argument specifies which of a set of
similarly named entities is being eliminated, dealing both with
overloading, and also appearence of the same entity name in different
scopes.

   This pragma indicates that the given entity is not used in the
program to be compiled and built. The effect of the pragma is to allow
the compiler to eliminate the code or data associated with the named
entity. Any reference to an eliminated entity causes a compile-time or
link-time error.

   The intention of pragma `Eliminate' is to allow a program to be
compiled in a system-independent manner, with unused entities
eliminated, without needing to modify the source text. Normally the
required set of `Eliminate' pragmas is constructed automatically using
the gnatelim tool.

   Any source file change that removes, splits, or adds lines may make
the set of Eliminate pragmas invalid because their `Source_Location'
argument values may get out of date.

   Pragma `Eliminate' may be used where the referenced entity is a
dispatching operation. In this case all the subprograms to which the
given operation can dispatch are considered to be unused (are never
called as a result of a direct or a dispatching call).


File: gnat_rm.info,  Node: Pragma Export_Exception,  Next: Pragma Export_Function,  Prev: Pragma Eliminate,  Up: Implementation Defined Pragmas

Pragma Export_Exception
=======================

Syntax:

     pragma Export_Exception (
          [Internal =>] LOCAL_NAME
       [, [External =>] EXTERNAL_SYMBOL]
       [, [Form     =>] Ada | VMS]
       [, [Code     =>] static_integer_EXPRESSION]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

This pragma is implemented only in the OpenVMS implementation of GNAT.
It causes the specified exception to be propagated outside of the Ada
program, so that it can be handled by programs written in other OpenVMS
languages.  This pragma establishes an external name for an Ada
exception and makes the name available to the OpenVMS Linker as a
global symbol.  For further details on this pragma, see the DEC Ada
Language Reference Manual, section 13.9a3.2.


File: gnat_rm.info,  Node: Pragma Export_Function,  Next: Pragma Export_Object,  Prev: Pragma Export_Exception,  Up: Implementation Defined Pragmas

Pragma Export_Function
======================

Syntax:

     pragma Export_Function (
          [Internal         =>] LOCAL_NAME
       [, [External         =>] EXTERNAL_SYMBOL]
       [, [Parameter_Types  =>] PARAMETER_TYPES]
       [, [Result_Type      =>] result_SUBTYPE_MARK]
       [, [Mechanism        =>] MECHANISM]
       [, [Result_Mechanism =>] MECHANISM_NAME]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION
     | ""

     PARAMETER_TYPES ::=
       null
     | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

     TYPE_DESIGNATOR ::=
       subtype_NAME
     | subtype_Name ' Access

     MECHANISM ::=
       MECHANISM_NAME
     | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

     MECHANISM_ASSOCIATION ::=
       [formal_parameter_NAME =>] MECHANISM_NAME

     MECHANISM_NAME ::=
       Value
     | Reference
     | Descriptor [([Class =>] CLASS_NAME)]
     | Short_Descriptor [([Class =>] CLASS_NAME)]

     CLASS_NAME ::= ubs | ubsb | uba | s | sb | a

Use this pragma to make a function externally callable and optionally
provide information on mechanisms to be used for passing parameter and
result values.  We recommend, for the purposes of improving portability,
this pragma always be used in conjunction with a separate pragma
`Export', which must precede the pragma `Export_Function'.  GNAT does
not require a separate pragma `Export', but if none is present,
`Convention Ada' is assumed, which is usually not what is wanted, so it
is usually appropriate to use this pragma in conjunction with a
`Export' or `Convention' pragma that specifies the desired foreign
convention.  Pragma `Export_Function' (and `Export', if present) must
appear in the same declarative region as the function to which they
apply.

   INTERNAL_NAME must uniquely designate the function to which the
pragma applies.  If more than one function name exists of this name in
the declarative part you must use the `Parameter_Types' and
`Result_Type' parameters is mandatory to achieve the required unique
designation.  SUBTYPE_MARKs in these parameters must exactly match the
subtypes in the corresponding function specification, using positional
notation to match parameters with subtype marks.  The form with an
`'Access' attribute can be used to match an anonymous access parameter.

   Passing by descriptor is supported only on the OpenVMS ports of GNAT.
The default behavior for Export_Function is to accept either 64bit or
32bit descriptors unless short_descriptor is specified, then only 32bit
descriptors are accepted.

   Special treatment is given if the EXTERNAL is an explicit null
string or a static string expressions that evaluates to the null
string. In this case, no external name is generated. This form still
allows the specification of parameter mechanisms.


File: gnat_rm.info,  Node: Pragma Export_Object,  Next: Pragma Export_Procedure,  Prev: Pragma Export_Function,  Up: Implementation Defined Pragmas

Pragma Export_Object
====================

Syntax:

     pragma Export_Object
           [Internal =>] LOCAL_NAME
        [, [External =>] EXTERNAL_SYMBOL]
        [, [Size     =>] EXTERNAL_SYMBOL]

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

This pragma designates an object as exported, and apart from the
extended rules for external symbols, is identical in effect to the use
of the normal `Export' pragma applied to an object.  You may use a
separate Export pragma (and you probably should from the point of view
of portability), but it is not required.  SIZE is syntax checked, but
otherwise ignored by GNAT.


File: gnat_rm.info,  Node: Pragma Export_Procedure,  Next: Pragma Export_Value,  Prev: Pragma Export_Object,  Up: Implementation Defined Pragmas

Pragma Export_Procedure
=======================

Syntax:

     pragma Export_Procedure (
          [Internal        =>] LOCAL_NAME
       [, [External        =>] EXTERNAL_SYMBOL]
       [, [Parameter_Types =>] PARAMETER_TYPES]
       [, [Mechanism       =>] MECHANISM]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION
     | ""

     PARAMETER_TYPES ::=
       null
     | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

     TYPE_DESIGNATOR ::=
       subtype_NAME
     | subtype_Name ' Access

     MECHANISM ::=
       MECHANISM_NAME
     | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

     MECHANISM_ASSOCIATION ::=
       [formal_parameter_NAME =>] MECHANISM_NAME

     MECHANISM_NAME ::=
       Value
     | Reference
     | Descriptor [([Class =>] CLASS_NAME)]
     | Short_Descriptor [([Class =>] CLASS_NAME)]

     CLASS_NAME ::= ubs | ubsb | uba | s | sb | a

This pragma is identical to `Export_Function' except that it applies to
a procedure rather than a function and the parameters `Result_Type' and
`Result_Mechanism' are not permitted.  GNAT does not require a separate
pragma `Export', but if none is present, `Convention Ada' is assumed,
which is usually not what is wanted, so it is usually appropriate to
use this pragma in conjunction with a `Export' or `Convention' pragma
that specifies the desired foreign convention.

   Passing by descriptor is supported only on the OpenVMS ports of GNAT.
The default behavior for Export_Procedure is to accept either 64bit or
32bit descriptors unless short_descriptor is specified, then only 32bit
descriptors are accepted.

   Special treatment is given if the EXTERNAL is an explicit null
string or a static string expressions that evaluates to the null
string. In this case, no external name is generated. This form still
allows the specification of parameter mechanisms.


File: gnat_rm.info,  Node: Pragma Export_Value,  Next: Pragma Export_Valued_Procedure,  Prev: Pragma Export_Procedure,  Up: Implementation Defined Pragmas

Pragma Export_Value
===================

Syntax:

     pragma Export_Value (
       [Value     =>] static_integer_EXPRESSION,
       [Link_Name =>] static_string_EXPRESSION);

This pragma serves to export a static integer value for external use.
The first argument specifies the value to be exported. The Link_Name
argument specifies the symbolic name to be associated with the integer
value. This pragma is useful for defining a named static value in Ada
that can be referenced in assembly language units to be linked with the
application. This pragma is currently supported only for the AAMP
target and is ignored for other targets.


File: gnat_rm.info,  Node: Pragma Export_Valued_Procedure,  Next: Pragma Extend_System,  Prev: Pragma Export_Value,  Up: Implementation Defined Pragmas

Pragma Export_Valued_Procedure
==============================

Syntax:

     pragma Export_Valued_Procedure (
          [Internal        =>] LOCAL_NAME
       [, [External        =>] EXTERNAL_SYMBOL]
       [, [Parameter_Types =>] PARAMETER_TYPES]
       [, [Mechanism       =>] MECHANISM]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION
     | ""

     PARAMETER_TYPES ::=
       null
     | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

     TYPE_DESIGNATOR ::=
       subtype_NAME
     | subtype_Name ' Access

     MECHANISM ::=
       MECHANISM_NAME
     | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

     MECHANISM_ASSOCIATION ::=
       [formal_parameter_NAME =>] MECHANISM_NAME

     MECHANISM_NAME ::=
       Value
     | Reference
     | Descriptor [([Class =>] CLASS_NAME)]
     | Short_Descriptor [([Class =>] CLASS_NAME)]

     CLASS_NAME ::= ubs | ubsb | uba | s | sb | a

This pragma is identical to `Export_Procedure' except that the first
parameter of LOCAL_NAME, which must be present, must be of mode `OUT',
and externally the subprogram is treated as a function with this
parameter as the result of the function.  GNAT provides for this
capability to allow the use of `OUT' and `IN OUT' parameters in
interfacing to external functions (which are not permitted in Ada
functions).  GNAT does not require a separate pragma `Export', but if
none is present, `Convention Ada' is assumed, which is almost certainly
not what is wanted since the whole point of this pragma is to interface
with foreign language functions, so it is usually appropriate to use
this pragma in conjunction with a `Export' or `Convention' pragma that
specifies the desired foreign convention.

   Passing by descriptor is supported only on the OpenVMS ports of GNAT.
The default behavior for Export_Valued_Procedure is to accept either
64bit or 32bit descriptors unless short_descriptor is specified, then
only 32bit descriptors are accepted.

   Special treatment is given if the EXTERNAL is an explicit null
string or a static string expressions that evaluates to the null
string. In this case, no external name is generated. This form still
allows the specification of parameter mechanisms.


File: gnat_rm.info,  Node: Pragma Extend_System,  Next: Pragma Extensions_Allowed,  Prev: Pragma Export_Valued_Procedure,  Up: Implementation Defined Pragmas

Pragma Extend_System
====================

Syntax:

     pragma Extend_System ([Name =>] IDENTIFIER);

This pragma is used to provide backwards compatibility with other
implementations that extend the facilities of package `System'.  In
GNAT, `System' contains only the definitions that are present in the
Ada RM.  However, other implementations, notably the DEC Ada 83
implementation, provide many extensions to package `System'.

   For each such implementation accommodated by this pragma, GNAT
provides a package `Aux_XXX', e.g. `Aux_DEC' for the DEC Ada 83
implementation, which provides the required additional definitions.  You
can use this package in two ways.  You can `with' it in the normal way
and access entities either by selection or using a `use' clause.  In
this case no special processing is required.

   However, if existing code contains references such as `System.XXX'
where XXX is an entity in the extended definitions provided in package
`System', you may use this pragma to extend visibility in `System' in a
non-standard way that provides greater compatibility with the existing
code.  Pragma `Extend_System' is a configuration pragma whose single
argument is the name of the package containing the extended definition
(e.g. `Aux_DEC' for the DEC Ada case).  A unit compiled under control
of this pragma will be processed using special visibility processing
that looks in package `System.Aux_XXX' where `Aux_XXX' is the pragma
argument for any entity referenced in package `System', but not found
in package `System'.

   You can use this pragma either to access a predefined `System'
extension supplied with the compiler, for example `Aux_DEC' or you can
construct your own extension unit following the above definition.  Note
that such a package is a child of `System' and thus is considered part
of the implementation.  To compile it you will have to use the
appropriate switch for compiling system units.  *Note GNAT User's
Guide: (gnat_ugn)Top, for details.


File: gnat_rm.info,  Node: Pragma Extensions_Allowed,  Next: Pragma External,  Prev: Pragma Extend_System,  Up: Implementation Defined Pragmas

Pragma Extensions_Allowed
=========================

Syntax:

     pragma Extensions_Allowed (On | Off);

This configuration pragma enables or disables the implementation
extension mode (the use of Off as a parameter cancels the effect of the
`-gnatX' command switch).

   In extension mode, the latest version of the Ada language is
implemented (currently Ada 2012), and in addition a small number of
GNAT specific extensions are recognized as follows:

Constrained attribute for generic objects
     The `Constrained' attribute is permitted for objects of generic
     types. The result indicates if the corresponding actual is
     constrained.



File: gnat_rm.info,  Node: Pragma External,  Next: Pragma External_Name_Casing,  Prev: Pragma Extensions_Allowed,  Up: Implementation Defined Pragmas

Pragma External
===============

Syntax:

     pragma External (
       [   Convention    =>] convention_IDENTIFIER,
       [   Entity        =>] LOCAL_NAME
       [, [External_Name =>] static_string_EXPRESSION ]
       [, [Link_Name     =>] static_string_EXPRESSION ]);

This pragma is identical in syntax and semantics to pragma `Export' as
defined in the Ada Reference Manual.  It is provided for compatibility
with some Ada 83 compilers that used this pragma for exactly the same
purposes as pragma `Export' before the latter was standardized.


File: gnat_rm.info,  Node: Pragma External_Name_Casing,  Next: Pragma Fast_Math,  Prev: Pragma External,  Up: Implementation Defined Pragmas

Pragma External_Name_Casing
===========================

Syntax:

     pragma External_Name_Casing (
       Uppercase | Lowercase
       [, Uppercase | Lowercase | As_Is]);

This pragma provides control over the casing of external names
associated with Import and Export pragmas.  There are two cases to
consider:

Implicit external names
     Implicit external names are derived from identifiers.  The most
     common case arises when a standard Ada Import or Export pragma is
     used with only two arguments, as in:

             pragma Import (C, C_Routine);

     Since Ada is a case-insensitive language, the spelling of the
     identifier in the Ada source program does not provide any
     information on the desired casing of the external name, and so a
     convention is needed.  In GNAT the default treatment is that such
     names are converted to all lower case letters.  This corresponds
     to the normal C style in many environments.  The first argument of
     pragma `External_Name_Casing' can be used to control this
     treatment.  If `Uppercase' is specified, then the name will be
     forced to all uppercase letters.  If `Lowercase' is specified,
     then the normal default of all lower case letters will be used.

     This same implicit treatment is also used in the case of extended
     DEC Ada 83 compatible Import and Export pragmas where an external
     name is explicitly specified using an identifier rather than a
     string.

Explicit external names
     Explicit external names are given as string literals.  The most
     common case arises when a standard Ada Import or Export pragma is
     used with three arguments, as in:

          pragma Import (C, C_Routine, "C_routine");

     In this case, the string literal normally provides the exact
     casing required for the external name.  The second argument of
     pragma `External_Name_Casing' may be used to modify this behavior.
     If `Uppercase' is specified, then the name will be forced to all
     uppercase letters.  If `Lowercase' is specified, then the name
     will be forced to all lowercase letters.  A specification of
     `As_Is' provides the normal default behavior in which the casing is
     taken from the string provided.

This pragma may appear anywhere that a pragma is valid.  In particular,
it can be used as a configuration pragma in the `gnat.adc' file, in
which case it applies to all subsequent compilations, or it can be used
as a program unit pragma, in which case it only applies to the current
unit, or it can be used more locally to control individual
Import/Export pragmas.

   It is primarily intended for use with OpenVMS systems, where many
compilers convert all symbols to upper case by default.  For
interfacing to such compilers (e.g. the DEC C compiler), it may be
convenient to use the pragma:

     pragma External_Name_Casing (Uppercase, Uppercase);

to enforce the upper casing of all external symbols.


File: gnat_rm.info,  Node: Pragma Fast_Math,  Next: Pragma Favor_Top_Level,  Prev: Pragma External_Name_Casing,  Up: Implementation Defined Pragmas

Pragma Fast_Math
================

Syntax:

     pragma Fast_Math;

This is a configuration pragma which activates a mode in which speed is
considered more important for floating-point operations than absolutely
accurate adherence to the requirements of the standard. Currently the
following operations are affected:

Complex Multiplication
     The normal simple formula for complex multiplication can result in
     intermediate overflows for numbers near the end of the range. The
     Ada standard requires that this situation be detected and
     corrected by scaling, but in Fast_Math mode such cases will simply
     result in overflow. Note that to take advantage of this you must
     instantiate your own version of
     `Ada.Numerics.Generic_Complex_Types' under control of the pragma,
     rather than use the preinstantiated versions.


File: gnat_rm.info,  Node: Pragma Favor_Top_Level,  Next: Pragma Finalize_Storage_Only,  Prev: Pragma Fast_Math,  Up: Implementation Defined Pragmas

Pragma Favor_Top_Level
======================

Syntax:

     pragma Favor_Top_Level (type_NAME);

The named type must be an access-to-subprogram type. This pragma is an
efficiency hint to the compiler, regarding the use of 'Access or
'Unrestricted_Access on nested (non-library-level) subprograms. The
pragma means that nested subprograms are not used with this type, or
are rare, so that the generated code should be efficient in the
top-level case. When this pragma is used, dynamically generated
trampolines may be used on some targets for nested subprograms.  See
also the No_Implicit_Dynamic_Code restriction.


File: gnat_rm.info,  Node: Pragma Finalize_Storage_Only,  Next: Pragma Float_Representation,  Prev: Pragma Favor_Top_Level,  Up: Implementation Defined Pragmas

Pragma Finalize_Storage_Only
============================

Syntax:

     pragma Finalize_Storage_Only (first_subtype_LOCAL_NAME);

This pragma allows the compiler not to emit a Finalize call for objects
defined at the library level.  This is mostly useful for types where
finalization is only used to deal with storage reclamation since in most
environments it is not necessary to reclaim memory just before
terminating execution, hence the name.


File: gnat_rm.info,  Node: Pragma Float_Representation,  Next: Pragma Ident,  Prev: Pragma Finalize_Storage_Only,  Up: Implementation Defined Pragmas

Pragma Float_Representation
===========================

Syntax:

     pragma Float_Representation (FLOAT_REP[, float_type_LOCAL_NAME]);

     FLOAT_REP ::= VAX_Float | IEEE_Float

In the one argument form, this pragma is a configuration pragma which
allows control over the internal representation chosen for the
predefined floating point types declared in the packages `Standard' and
`System'. On all systems other than OpenVMS, the argument must be
`IEEE_Float' and the pragma has no effect. On OpenVMS, the argument may
be `VAX_Float' to specify the use of the VAX float format for the
floating-point types in Standard. This requires that the standard
runtime libraries be recompiled.

   The two argument form specifies the representation to be used for
the specified floating-point type. On all systems other than OpenVMS,
the argument must be `IEEE_Float' and the pragma has no effect. On
OpenVMS, the argument may be `VAX_Float' to specify the use of the VAX
float format, as follows:

   * For digits values up to 6, F float format will be used.

   * For digits values from 7 to 9, D float format will be used.

   * For digits values from 10 to 15, G float format will be used.

   * Digits values above 15 are not allowed.


File: gnat_rm.info,  Node: Pragma Ident,  Next: Pragma Implemented,  Prev: Pragma Float_Representation,  Up: Implementation Defined Pragmas

Pragma Ident
============

Syntax:

     pragma Ident (static_string_EXPRESSION);

This pragma provides a string identification in the generated object
file, if the system supports the concept of this kind of identification
string.  This pragma is allowed only in the outermost declarative part
or declarative items of a compilation unit. If more than one `Ident'
pragma is given, only the last one processed is effective.  On OpenVMS
systems, the effect of the pragma is identical to the effect of the DEC
Ada 83 pragma of the same name. Note that in DEC Ada 83, the maximum
allowed length is 31 characters, so if it is important to maintain
compatibility with this compiler, you should obey this length limit.


File: gnat_rm.info,  Node: Pragma Implemented,  Next: Pragma Implicit_Packing,  Prev: Pragma Ident,  Up: Implementation Defined Pragmas

Pragma Implemented
==================

Syntax:

     pragma Implemented (procedure_LOCAL_NAME, implementation_kind);

     implementation_kind ::= By_Entry | By_Protected_Procedure | By_Any

This is an Ada 2012 representation pragma which applies to protected,
task and synchronized interface primitives. The use of pragma
Implemented provides a way to impose a static requirement on the
overriding operation by adhering to one of the three implementation
kids: entry, protected procedure or any of the above.

     type Synch_Iface is synchronized interface;
     procedure Prim_Op (Obj : in out Iface) is abstract;
     pragma Implemented (Prim_Op, By_Protected_Procedure);

     protected type Prot_1 is new Synch_Iface with
        procedure Prim_Op;  --  Legal
     end Prot_1;

     protected type Prot_2 is new Synch_Iface with
        entry Prim_Op;      --  Illegal
     end Prot_2;

     task type Task_Typ is new Synch_Iface with
        entry Prim_Op;      --  Illegal
     end Task_Typ;

When applied to the procedure_or_entry_NAME of a requeue statement,
pragma Implemented determines the runtime behavior of the requeue.
Implementation kind By_Entry guarantees that the action of requeueing
will proceed from an entry to another entry. Implementation kind
By_Protected_Procedure transforms the requeue into a dispatching call,
thus eliminating the chance of blocking. Kind By_Any shares the
behavior of By_Entry and By_Protected_Procedure depending on the
target's overriding subprogram kind.


File: gnat_rm.info,  Node: Pragma Implicit_Packing,  Next: Pragma Import_Exception,  Prev: Pragma Implemented,  Up: Implementation Defined Pragmas

Pragma Implicit_Packing
=======================

Syntax:

     pragma Implicit_Packing;

This is a configuration pragma that requests implicit packing for packed
arrays for which a size clause is given but no explicit pragma Pack or
specification of Component_Size is present. It also applies to records
where no record representation clause is present. Consider this example:

     type R is array (0 .. 7) of Boolean;
     for R'Size use 8;

In accordance with the recommendation in the RM (RM 13.3(53)), a Size
clause does not change the layout of a composite object. So the Size
clause in the above example is normally rejected, since the default
layout of the array uses 8-bit components, and thus the array requires
a minimum of 64 bits.

   If this declaration is compiled in a region of code covered by an
occurrence of the configuration pragma Implicit_Packing, then the Size
clause in this and similar examples will cause implicit packing and
thus be accepted. For this implicit packing to occur, the type in
question must be an array of small components whose size is known at
compile time, and the Size clause must specify the exact size that
corresponds to the length of the array multiplied by the size in bits
of the component type.  

   Similarly, the following example shows the use in the record case

     type r is record
        a, b, c, d, e, f, g, h : boolean;
        chr                    : character;
     end record;
     for r'size use 16;

Without a pragma Pack, each Boolean field requires 8 bits, so the
minimum size is 72 bits, but with a pragma Pack, 16 bits would be
sufficient. The use of pragma Implicit_Packing allows this record
declaration to compile without an explicit pragma Pack.


File: gnat_rm.info,  Node: Pragma Import_Exception,  Next: Pragma Import_Function,  Prev: Pragma Implicit_Packing,  Up: Implementation Defined Pragmas

Pragma Import_Exception
=======================

Syntax:

     pragma Import_Exception (
          [Internal =>] LOCAL_NAME
       [, [External =>] EXTERNAL_SYMBOL]
       [, [Form     =>] Ada | VMS]
       [, [Code     =>] static_integer_EXPRESSION]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

This pragma is implemented only in the OpenVMS implementation of GNAT.
It allows OpenVMS conditions (for example, from OpenVMS system services
or other OpenVMS languages) to be propagated to Ada programs as Ada
exceptions.  The pragma specifies that the exception associated with an
exception declaration in an Ada program be defined externally (in
non-Ada code).  For further details on this pragma, see the DEC Ada
Language Reference Manual, section 13.9a.3.1.


File: gnat_rm.info,  Node: Pragma Import_Function,  Next: Pragma Import_Object,  Prev: Pragma Import_Exception,  Up: Implementation Defined Pragmas

Pragma Import_Function
======================

Syntax:

     pragma Import_Function (
          [Internal                 =>] LOCAL_NAME,
       [, [External                 =>] EXTERNAL_SYMBOL]
       [, [Parameter_Types          =>] PARAMETER_TYPES]
       [, [Result_Type              =>] SUBTYPE_MARK]
       [, [Mechanism                =>] MECHANISM]
       [, [Result_Mechanism         =>] MECHANISM_NAME]
       [, [First_Optional_Parameter =>] IDENTIFIER]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

     PARAMETER_TYPES ::=
       null
     | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

     TYPE_DESIGNATOR ::=
       subtype_NAME
     | subtype_Name ' Access

     MECHANISM ::=
       MECHANISM_NAME
     | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

     MECHANISM_ASSOCIATION ::=
       [formal_parameter_NAME =>] MECHANISM_NAME

     MECHANISM_NAME ::=
       Value
     | Reference
     | Descriptor [([Class =>] CLASS_NAME)]
     | Short_Descriptor [([Class =>] CLASS_NAME)]

     CLASS_NAME ::= ubs | ubsb | uba | s | sb | a | nca

This pragma is used in conjunction with a pragma `Import' to specify
additional information for an imported function.  The pragma `Import'
(or equivalent pragma `Interface') must precede the `Import_Function'
pragma and both must appear in the same declarative part as the
function specification.

   The INTERNAL argument must uniquely designate the function to which
the pragma applies.  If more than one function name exists of this name
in the declarative part you must use the `Parameter_Types' and
RESULT_TYPE parameters to achieve the required unique designation.
Subtype marks in these parameters must exactly match the subtypes in
the corresponding function specification, using positional notation to
match parameters with subtype marks.  The form with an `'Access'
attribute can be used to match an anonymous access parameter.

   You may optionally use the MECHANISM and RESULT_MECHANISM parameters
to specify passing mechanisms for the parameters and result.  If you
specify a single mechanism name, it applies to all parameters.
Otherwise you may specify a mechanism on a parameter by parameter basis
using either positional or named notation.  If the mechanism is not
specified, the default mechanism is used.

   Passing by descriptor is supported only on the OpenVMS ports of GNAT.
The default behavior for Import_Function is to pass a 64bit descriptor
unless short_descriptor is specified, then a 32bit descriptor is passed.

   `First_Optional_Parameter' applies only to OpenVMS ports of GNAT.
It specifies that the designated parameter and all following parameters
are optional, meaning that they are not passed at the generated code
level (this is distinct from the notion of optional parameters in Ada
where the parameters are passed anyway with the designated optional
parameters).  All optional parameters must be of mode `IN' and have
default parameter values that are either known at compile time
expressions, or uses of the `'Null_Parameter' attribute.


File: gnat_rm.info,  Node: Pragma Import_Object,  Next: Pragma Import_Procedure,  Prev: Pragma Import_Function,  Up: Implementation Defined Pragmas

Pragma Import_Object
====================

Syntax:

     pragma Import_Object
          [Internal =>] LOCAL_NAME
       [, [External =>] EXTERNAL_SYMBOL]
       [, [Size     =>] EXTERNAL_SYMBOL]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

This pragma designates an object as imported, and apart from the
extended rules for external symbols, is identical in effect to the use
of the normal `Import' pragma applied to an object.  Unlike the
subprogram case, you need not use a separate `Import' pragma, although
you may do so (and probably should do so from a portability point of
view).  SIZE is syntax checked, but otherwise ignored by GNAT.


File: gnat_rm.info,  Node: Pragma Import_Procedure,  Next: Pragma Import_Valued_Procedure,  Prev: Pragma Import_Object,  Up: Implementation Defined Pragmas

Pragma Import_Procedure
=======================

Syntax:

     pragma Import_Procedure (
          [Internal                 =>] LOCAL_NAME
       [, [External                 =>] EXTERNAL_SYMBOL]
       [, [Parameter_Types          =>] PARAMETER_TYPES]
       [, [Mechanism                =>] MECHANISM]
       [, [First_Optional_Parameter =>] IDENTIFIER]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

     PARAMETER_TYPES ::=
       null
     | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

     TYPE_DESIGNATOR ::=
       subtype_NAME
     | subtype_Name ' Access

     MECHANISM ::=
       MECHANISM_NAME
     | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

     MECHANISM_ASSOCIATION ::=
       [formal_parameter_NAME =>] MECHANISM_NAME

     MECHANISM_NAME ::=
       Value
     | Reference
     | Descriptor [([Class =>] CLASS_NAME)]
     | Short_Descriptor [([Class =>] CLASS_NAME)]

     CLASS_NAME ::= ubs | ubsb | uba | s | sb | a | nca

This pragma is identical to `Import_Function' except that it applies to
a procedure rather than a function and the parameters `Result_Type' and
`Result_Mechanism' are not permitted.


File: gnat_rm.info,  Node: Pragma Import_Valued_Procedure,  Next: Pragma Initialize_Scalars,  Prev: Pragma Import_Procedure,  Up: Implementation Defined Pragmas

Pragma Import_Valued_Procedure
==============================

Syntax:

     pragma Import_Valued_Procedure (
          [Internal                 =>] LOCAL_NAME
       [, [External                 =>] EXTERNAL_SYMBOL]
       [, [Parameter_Types          =>] PARAMETER_TYPES]
       [, [Mechanism                =>] MECHANISM]
       [, [First_Optional_Parameter =>] IDENTIFIER]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

     PARAMETER_TYPES ::=
       null
     | TYPE_DESIGNATOR {, TYPE_DESIGNATOR}

     TYPE_DESIGNATOR ::=
       subtype_NAME
     | subtype_Name ' Access

     MECHANISM ::=
       MECHANISM_NAME
     | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION})

     MECHANISM_ASSOCIATION ::=
       [formal_parameter_NAME =>] MECHANISM_NAME

     MECHANISM_NAME ::=
       Value
     | Reference
     | Descriptor [([Class =>] CLASS_NAME)]
     | Short_Descriptor [([Class =>] CLASS_NAME)]

     CLASS_NAME ::= ubs | ubsb | uba | s | sb | a | nca

This pragma is identical to `Import_Procedure' except that the first
parameter of LOCAL_NAME, which must be present, must be of mode `OUT',
and externally the subprogram is treated as a function with this
parameter as the result of the function.  The purpose of this
capability is to allow the use of `OUT' and `IN OUT' parameters in
interfacing to external functions (which are not permitted in Ada
functions).  You may optionally use the `Mechanism' parameters to
specify passing mechanisms for the parameters.  If you specify a single
mechanism name, it applies to all parameters.  Otherwise you may
specify a mechanism on a parameter by parameter basis using either
positional or named notation.  If the mechanism is not specified, the
default mechanism is used.

   Note that it is important to use this pragma in conjunction with a
separate pragma Import that specifies the desired convention, since
otherwise the default convention is Ada, which is almost certainly not
what is required.


File: gnat_rm.info,  Node: Pragma Initialize_Scalars,  Next: Pragma Inline_Always,  Prev: Pragma Import_Valued_Procedure,  Up: Implementation Defined Pragmas

Pragma Initialize_Scalars
=========================

Syntax:

     pragma Initialize_Scalars;

This pragma is similar to `Normalize_Scalars' conceptually but has two
important differences.  First, there is no requirement for the pragma
to be used uniformly in all units of a partition, in particular, it is
fine to use this just for some or all of the application units of a
partition, without needing to recompile the run-time library.

   In the case where some units are compiled with the pragma, and some
without, then a declaration of a variable where the type is defined in
package Standard or is locally declared will always be subject to
initialization, as will any declaration of a scalar variable.  For
composite variables, whether the variable is initialized may also
depend on whether the package in which the type of the variable is
declared is compiled with the pragma.

   The other important difference is that you can control the value used
for initializing scalar objects.  At bind time, you can select several
options for initialization. You can initialize with invalid values
(similar to Normalize_Scalars, though for Initialize_Scalars it is not
always possible to determine the invalid values in complex cases like
signed component fields with non-standard sizes). You can also
initialize with high or low values, or with a specified bit pattern.
See the users guide for binder options for specifying these cases.

   This means that you can compile a program, and then without having to
recompile the program, you can run it with different values being used
for initializing otherwise uninitialized values, to test if your program
behavior depends on the choice.  Of course the behavior should not
change, and if it does, then most likely you have an erroneous
reference to an uninitialized value.

   It is even possible to change the value at execution time
eliminating even the need to rebind with a different switch using an
environment variable.  See the GNAT users guide for details.

   Note that pragma `Initialize_Scalars' is particularly useful in
conjunction with the enhanced validity checking that is now provided in
GNAT, which checks for invalid values under more conditions.  Using
this feature (see description of the `-gnatV' flag in the users guide)
in conjunction with pragma `Initialize_Scalars' provides a powerful new
tool to assist in the detection of problems caused by uninitialized
variables.

   Note: the use of `Initialize_Scalars' has a fairly extensive effect
on the generated code. This may cause your code to be substantially
larger. It may also cause an increase in the amount of stack required,
so it is probably a good idea to turn on stack checking (see
description of stack checking in the GNAT users guide) when using this
pragma.


File: gnat_rm.info,  Node: Pragma Inline_Always,  Next: Pragma Inline_Generic,  Prev: Pragma Initialize_Scalars,  Up: Implementation Defined Pragmas

Pragma Inline_Always
====================

Syntax:

     pragma Inline_Always (NAME [, NAME]);

Similar to pragma `Inline' except that inlining is not subject to the
use of option `-gnatn' and the inlining happens regardless of whether
this option is used.


File: gnat_rm.info,  Node: Pragma Inline_Generic,  Next: Pragma Interface,  Prev: Pragma Inline_Always,  Up: Implementation Defined Pragmas

Pragma Inline_Generic
=====================

Syntax:

     pragma Inline_Generic (generic_package_NAME);

This is implemented for compatibility with DEC Ada 83 and is recognized,
but otherwise ignored, by GNAT.  All generic instantiations are inlined
by default when using GNAT.


File: gnat_rm.info,  Node: Pragma Interface,  Next: Pragma Interface_Name,  Prev: Pragma Inline_Generic,  Up: Implementation Defined Pragmas

Pragma Interface
================

Syntax:

     pragma Interface (
          [Convention    =>] convention_identifier,
          [Entity        =>] local_NAME
       [, [External_Name =>] static_string_expression]
       [, [Link_Name     =>] static_string_expression]);

This pragma is identical in syntax and semantics to the standard Ada
pragma `Import'.  It is provided for compatibility with Ada 83.  The
definition is upwards compatible both with pragma `Interface' as
defined in the Ada 83 Reference Manual, and also with some extended
implementations of this pragma in certain Ada 83 implementations.  The
only difference between pragma `Interface' and pragma `Import' is that
there is special circuitry to allow both pragmas to appear for the same
subprogram entity (normally it is illegal to have multiple `Import'
pragmas. This is useful in maintaining Ada 83/Ada 95 compatibility and
is compatible with other Ada 83 compilers.


File: gnat_rm.info,  Node: Pragma Interface_Name,  Next: Pragma Interrupt_Handler,  Prev: Pragma Interface,  Up: Implementation Defined Pragmas

Pragma Interface_Name
=====================

Syntax:

     pragma Interface_Name (
          [Entity        =>] LOCAL_NAME
       [, [External_Name =>] static_string_EXPRESSION]
       [, [Link_Name     =>] static_string_EXPRESSION]);

This pragma provides an alternative way of specifying the interface name
for an interfaced subprogram, and is provided for compatibility with Ada
83 compilers that use the pragma for this purpose.  You must provide at
least one of EXTERNAL_NAME or LINK_NAME.


File: gnat_rm.info,  Node: Pragma Interrupt_Handler,  Next: Pragma Interrupt_State,  Prev: Pragma Interface_Name,  Up: Implementation Defined Pragmas

Pragma Interrupt_Handler
========================

Syntax:

     pragma Interrupt_Handler (procedure_LOCAL_NAME);

This program unit pragma is supported for parameterless protected
procedures as described in Annex C of the Ada Reference Manual. On the
AAMP target the pragma can also be specified for nonprotected
parameterless procedures that are declared at the library level (which
includes procedures declared at the top level of a library package). In
the case of AAMP, when this pragma is applied to a nonprotected
procedure, the instruction `IERET' is generated for returns from the
procedure, enabling maskable interrupts, in place of the normal return
instruction.


File: gnat_rm.info,  Node: Pragma Interrupt_State,  Next: Pragma Invariant,  Prev: Pragma Interrupt_Handler,  Up: Implementation Defined Pragmas

Pragma Interrupt_State
======================

Syntax:

     pragma Interrupt_State
      ([Name  =>] value,
       [State =>] SYSTEM | RUNTIME | USER);

Normally certain interrupts are reserved to the implementation.  Any
attempt to attach an interrupt causes Program_Error to be raised, as
described in RM C.3.2(22).  A typical example is the `SIGINT' interrupt
used in many systems for an `Ctrl-C' interrupt.  Normally this
interrupt is reserved to the implementation, so that `Ctrl-C' can be
used to interrupt execution.  Additionally, signals such as `SIGSEGV',
`SIGABRT', `SIGFPE' and `SIGILL' are often mapped to specific Ada
exceptions, or used to implement run-time functions such as the `abort'
statement and stack overflow checking.

   Pragma `Interrupt_State' provides a general mechanism for overriding
such uses of interrupts.  It subsumes the functionality of pragma
`Unreserve_All_Interrupts'.  Pragma `Interrupt_State' is not available
on Windows or VMS.  On all other platforms than VxWorks, it applies to
signals; on VxWorks, it applies to vectored hardware interrupts and may
be used to mark interrupts required by the board support package as
reserved.

   Interrupts can be in one of three states:
   * System

     The interrupt is reserved (no Ada handler can be installed), and
     the Ada run-time may not install a handler. As a result you are
     guaranteed standard system default action if this interrupt is
     raised.

   * Runtime

     The interrupt is reserved (no Ada handler can be installed). The
     run time is allowed to install a handler for internal control
     purposes, but is not required to do so.

   * User

     The interrupt is unreserved.  The user may install a handler to
     provide some other action.

These states are the allowed values of the `State' parameter of the
pragma.  The `Name' parameter is a value of the type
`Ada.Interrupts.Interrupt_ID'.  Typically, it is a name declared in
`Ada.Interrupts.Names'.

   This is a configuration pragma, and the binder will check that there
are no inconsistencies between different units in a partition in how a
given interrupt is specified. It may appear anywhere a pragma is legal.

   The effect is to move the interrupt to the specified state.

   By declaring interrupts to be SYSTEM, you guarantee the standard
system action, such as a core dump.

   By declaring interrupts to be USER, you guarantee that you can
install a handler.

   Note that certain signals on many operating systems cannot be caught
and handled by applications.  In such cases, the pragma is ignored.
See the operating system documentation, or the value of the array
`Reserved' declared in the spec of package `System.OS_Interface'.

   Overriding the default state of signals used by the Ada runtime may
interfere with an application's runtime behavior in the cases of the
synchronous signals, and in the case of the signal used to implement
the `abort' statement.


File: gnat_rm.info,  Node: Pragma Invariant,  Next: Pragma Keep_Names,  Prev: Pragma Interrupt_State,  Up: Implementation Defined Pragmas

Pragma Invariant
================

Syntax:

     pragma Invariant
       ([Entity =>]    private_type_LOCAL_NAME,
        [Check  =>]    EXPRESSION
        [,[Message =>] String_Expression]);

This pragma provides exactly the same capabilities as the Invariant
aspect defined in AI05-0146-1, and in the Ada 2012 Reference Manual.
The Invariant aspect is fully implemented in Ada 2012 mode, but since
it requires the use of the aspect syntax, which is not available
exception in 2012 mode, it is not possible to use the Invariant aspect
in earlier versions of Ada. However the Invariant pragma may be used in
any version of Ada.

   The pragma must appear within the visible part of the package
specification, after the type to which its Entity argument appears. As
with the Invariant aspect, the Check expression is not analyzed until
the end of the visible part of the package, so it may contain forward
references. The Message argument, if present, provides the exception
message used if the invariant is violated. If no Message parameter is
provided, a default message that identifies the line on which the
pragma appears is used.

   It is permissible to have multiple Invariants for the same type
entity, in which case they are and'ed together. It is permissible to
use this pragma in Ada 2012 mode, but you cannot have both an invariant
aspect and an invariant pragma for the same entity.

   For further details on the use of this pragma, see the Ada 2012
documentation of the Invariant aspect.


File: gnat_rm.info,  Node: Pragma Keep_Names,  Next: Pragma License,  Prev: Pragma Invariant,  Up: Implementation Defined Pragmas

Pragma Keep_Names
=================

Syntax:

     pragma Keep_Names ([On =>] enumeration_first_subtype_LOCAL_NAME);

The LOCAL_NAME argument must refer to an enumeration first subtype in
the current declarative part. The effect is to retain the enumeration
literal names for use by `Image' and `Value' even if a global
`Discard_Names' pragma applies. This is useful when you want to
generally suppress enumeration literal names and for example you
therefore use a `Discard_Names' pragma in the `gnat.adc' file, but you
want to retain the names for specific enumeration types.


File: gnat_rm.info,  Node: Pragma License,  Next: Pragma Link_With,  Prev: Pragma Keep_Names,  Up: Implementation Defined Pragmas

Pragma License
==============

Syntax:

     pragma License (Unrestricted | GPL | Modified_GPL | Restricted);

This pragma is provided to allow automated checking for appropriate
license conditions with respect to the standard and modified GPL.  A
pragma `License', which is a configuration pragma that typically
appears at the start of a source file or in a separate `gnat.adc' file,
specifies the licensing conditions of a unit as follows:

   * Unrestricted This is used for a unit that can be freely used with
     no license restrictions.  Examples of such units are public domain
     units, and units from the Ada Reference Manual.

   * GPL This is used for a unit that is licensed under the unmodified
     GPL, and which therefore cannot be `with''ed by a restricted unit.

   * Modified_GPL This is used for a unit licensed under the GNAT
     modified GPL that includes a special exception paragraph that
     specifically permits the inclusion of the unit in programs without
     requiring the entire program to be released under the GPL.

   * Restricted This is used for a unit that is restricted in that it
     is not permitted to depend on units that are licensed under the
     GPL.  Typical examples are proprietary code that is to be released
     under more restrictive license conditions.  Note that restricted
     units are permitted to `with' units which are licensed under the
     modified GPL (this is the whole point of the modified GPL).


Normally a unit with no `License' pragma is considered to have an
unknown license, and no checking is done.  However, standard GNAT
headers are recognized, and license information is derived from them as
follows.

     A GNAT license header starts with a line containing 78 hyphens.
     The following comment text is searched for the appearance of any
     of the following strings.

     If the string "GNU General Public License" is found, then the unit
     is assumed to have GPL license, unless the string "As a special
     exception" follows, in which case the license is assumed to be
     modified GPL.

     If one of the strings "This specification is adapted from the Ada
     Semantic Interface" or "This specification is derived from the Ada
     Reference Manual" is found then the unit is assumed to be
     unrestricted.

These default actions means that a program with a restricted license
pragma will automatically get warnings if a GPL unit is inappropriately
`with''ed.  For example, the program:

     with Sem_Ch3;
     with GNAT.Sockets;
     procedure Secret_Stuff is
       ...
     end Secret_Stuff

if compiled with pragma `License' (`Restricted') in a `gnat.adc' file
will generate the warning:

     1.  with Sem_Ch3;
             |
        >>> license of withed unit "Sem_Ch3" is incompatible

     2.  with GNAT.Sockets;
     3.  procedure Secret_Stuff is

Here we get a warning on `Sem_Ch3' since it is part of the GNAT
compiler and is licensed under the GPL, but no warning for
`GNAT.Sockets' which is part of the GNAT run time, and is therefore
licensed under the modified GPL.


File: gnat_rm.info,  Node: Pragma Link_With,  Next: Pragma Linker_Alias,  Prev: Pragma License,  Up: Implementation Defined Pragmas

Pragma Link_With
================

Syntax:

     pragma Link_With (static_string_EXPRESSION {,static_string_EXPRESSION});

This pragma is provided for compatibility with certain Ada 83 compilers.
It has exactly the same effect as pragma `Linker_Options' except that
spaces occurring within one of the string expressions are treated as
separators. For example, in the following case:

     pragma Link_With ("-labc -ldef");

results in passing the strings `-labc' and `-ldef' as two separate
arguments to the linker. In addition pragma Link_With allows multiple
arguments, with the same effect as successive pragmas.


File: gnat_rm.info,  Node: Pragma Linker_Alias,  Next: Pragma Linker_Constructor,  Prev: Pragma Link_With,  Up: Implementation Defined Pragmas

Pragma Linker_Alias
===================

Syntax:

     pragma Linker_Alias (
       [Entity =>] LOCAL_NAME,
       [Target =>] static_string_EXPRESSION);

LOCAL_NAME must refer to an object that is declared at the library
level. This pragma establishes the given entity as a linker alias for
the given target. It is equivalent to `__attribute__((alias))' in GNU C
and causes LOCAL_NAME to be emitted as an alias for the symbol
STATIC_STRING_EXPRESSION in the object file, that is to say no space is
reserved for LOCAL_NAME by the assembler and it will be resolved to the
same address as STATIC_STRING_EXPRESSION by the linker.

   The actual linker name for the target must be used (e.g. the fully
encoded name with qualification in Ada, or the mangled name in C++), or
it must be declared using the C convention with `pragma Import' or
`pragma Export'.

   Not all target machines support this pragma. On some of them it is
accepted only if `pragma Weak_External' has been applied to LOCAL_NAME.

     --  Example of the use of pragma Linker_Alias

     package p is
       i : Integer := 1;
       pragma Export (C, i);

       new_name_for_i : Integer;
       pragma Linker_Alias (new_name_for_i, "i");
     end p;


File: gnat_rm.info,  Node: Pragma Linker_Constructor,  Next: Pragma Linker_Destructor,  Prev: Pragma Linker_Alias,  Up: Implementation Defined Pragmas

Pragma Linker_Constructor
=========================

Syntax:

     pragma Linker_Constructor (procedure_LOCAL_NAME);

PROCEDURE_LOCAL_NAME must refer to a parameterless procedure that is
declared at the library level. A procedure to which this pragma is
applied will be treated as an initialization routine by the linker.  It
is equivalent to `__attribute__((constructor))' in GNU C and causes
PROCEDURE_LOCAL_NAME to be invoked before the entry point of the
executable is called (or immediately after the shared library is loaded
if the procedure is linked in a shared library), in particular before
the Ada run-time environment is set up.

   Because of these specific contexts, the set of operations such a
procedure can perform is very limited and the type of objects it can
manipulate is essentially restricted to the elementary types. In
particular, it must only contain code to which pragma Restrictions
(No_Elaboration_Code) applies.

   This pragma is used by GNAT to implement auto-initialization of
shared Stand Alone Libraries, which provides a related capability
without the restrictions listed above. Where possible, the use of Stand
Alone Libraries is preferable to the use of this pragma.


File: gnat_rm.info,  Node: Pragma Linker_Destructor,  Next: Pragma Linker_Section,  Prev: Pragma Linker_Constructor,  Up: Implementation Defined Pragmas

Pragma Linker_Destructor
========================

Syntax:

     pragma Linker_Destructor (procedure_LOCAL_NAME);

PROCEDURE_LOCAL_NAME must refer to a parameterless procedure that is
declared at the library level. A procedure to which this pragma is
applied will be treated as a finalization routine by the linker.  It is
equivalent to `__attribute__((destructor))' in GNU C and causes
PROCEDURE_LOCAL_NAME to be invoked after the entry point of the
executable has exited (or immediately before the shared library is
unloaded if the procedure is linked in a shared library), in particular
after the Ada run-time environment is shut down.

   See `pragma Linker_Constructor' for the set of restrictions that
apply because of these specific contexts.


File: gnat_rm.info,  Node: Pragma Linker_Section,  Next: Pragma Long_Float,  Prev: Pragma Linker_Destructor,  Up: Implementation Defined Pragmas

Pragma Linker_Section
=====================

Syntax:

     pragma Linker_Section (
       [Entity  =>] LOCAL_NAME,
       [Section =>] static_string_EXPRESSION);

LOCAL_NAME must refer to an object that is declared at the library
level. This pragma specifies the name of the linker section for the
given entity. It is equivalent to `__attribute__((section))' in GNU C
and causes LOCAL_NAME to be placed in the STATIC_STRING_EXPRESSION
section of the executable (assuming the linker doesn't rename the
section).

   The compiler normally places library-level objects in standard
sections depending on their type: procedures and functions generally go
in the `.text' section, initialized variables in the `.data' section
and uninitialized variables in the `.bss' section.

   Other, special sections may exist on given target machines to map
special hardware, for example I/O ports or flash memory. This pragma is
a means to defer the final layout of the executable to the linker, thus
fully working at the symbolic level with the compiler.

   Some file formats do not support arbitrary sections so not all target
machines support this pragma. The use of this pragma may cause a program
execution to be erroneous if it is used to place an entity into an
inappropriate section (e.g. a modified variable into the `.text'
section). See also `pragma Persistent_BSS'.

     --  Example of the use of pragma Linker_Section

     package IO_Card is
       Port_A : Integer;
       pragma Volatile (Port_A);
       pragma Linker_Section (Port_A, ".bss.port_a");

       Port_B : Integer;
       pragma Volatile (Port_B);
       pragma Linker_Section (Port_B, ".bss.port_b");
     end IO_Card;


File: gnat_rm.info,  Node: Pragma Long_Float,  Next: Pragma Machine_Attribute,  Prev: Pragma Linker_Section,  Up: Implementation Defined Pragmas

Pragma Long_Float
=================

Syntax:

     pragma Long_Float (FLOAT_FORMAT);

     FLOAT_FORMAT ::= D_Float | G_Float

This pragma is implemented only in the OpenVMS implementation of GNAT.
It allows control over the internal representation chosen for the
predefined type `Long_Float' and for floating point type
representations with `digits' specified in the range 7 through 15.  For
further details on this pragma, see the `DEC Ada Language Reference
Manual', section 3.5.7b.  Note that to use this pragma, the standard
runtime libraries must be recompiled.


File: gnat_rm.info,  Node: Pragma Machine_Attribute,  Next: Pragma Main,  Prev: Pragma Long_Float,  Up: Implementation Defined Pragmas

Pragma Machine_Attribute
========================

Syntax:

     pragma Machine_Attribute (
          [Entity         =>] LOCAL_NAME,
          [Attribute_Name =>] static_string_EXPRESSION
       [, [Info           =>] static_EXPRESSION] );

Machine-dependent attributes can be specified for types and/or
declarations.  This pragma is semantically equivalent to
`__attribute__((ATTRIBUTE_NAME))' (if INFO is not specified) or
`__attribute__((ATTRIBUTE_NAME(INFO)))' in GNU C, where
`ATTRIBUTE_NAME' is recognized by the compiler middle-end or the
`TARGET_ATTRIBUTE_TABLE' machine specific macro.  A string literal for
the optional parameter INFO is transformed into an identifier, which
may make this pragma unusable for some attributes.  *Note Defining
target-specific uses of `__attribute__': (gccint)Target Attributes,
further information.


File: gnat_rm.info,  Node: Pragma Main,  Next: Pragma Main_Storage,  Prev: Pragma Machine_Attribute,  Up: Implementation Defined Pragmas

Pragma Main
===========

Syntax:

     pragma Main
      (MAIN_OPTION [, MAIN_OPTION]);

     MAIN_OPTION ::=
       [Stack_Size              =>] static_integer_EXPRESSION
     | [Task_Stack_Size_Default =>] static_integer_EXPRESSION
     | [Time_Slicing_Enabled    =>] static_boolean_EXPRESSION

This pragma is provided for compatibility with OpenVMS VAX Systems.  It
has no effect in GNAT, other than being syntax checked.


File: gnat_rm.info,  Node: Pragma Main_Storage,  Next: Pragma No_Body,  Prev: Pragma Main,  Up: Implementation Defined Pragmas

Pragma Main_Storage
===================

Syntax:

     pragma Main_Storage
       (MAIN_STORAGE_OPTION [, MAIN_STORAGE_OPTION]);

     MAIN_STORAGE_OPTION ::=
       [WORKING_STORAGE =>] static_SIMPLE_EXPRESSION
     | [TOP_GUARD       =>] static_SIMPLE_EXPRESSION

This pragma is provided for compatibility with OpenVMS VAX Systems.  It
has no effect in GNAT, other than being syntax checked.  Note that the
pragma also has no effect in DEC Ada 83 for OpenVMS Alpha Systems.


File: gnat_rm.info,  Node: Pragma No_Body,  Next: Pragma No_Return,  Prev: Pragma Main_Storage,  Up: Implementation Defined Pragmas

Pragma No_Body
==============

Syntax:

     pragma No_Body;

There are a number of cases in which a package spec does not require a
body, and in fact a body is not permitted. GNAT will not permit the
spec to be compiled if there is a body around. The pragma No_Body
allows you to provide a body file, even in a case where no body is
allowed. The body file must contain only comments and a single No_Body
pragma. This is recognized by the compiler as indicating that no body
is logically present.

   This is particularly useful during maintenance when a package is
modified in such a way that a body needed before is no longer needed.
The provision of a dummy body with a No_Body pragma ensures that there
is no interference from earlier versions of the package body.


File: gnat_rm.info,  Node: Pragma No_Return,  Next: Pragma No_Strict_Aliasing,  Prev: Pragma No_Body,  Up: Implementation Defined Pragmas

Pragma No_Return
================

Syntax:

     pragma No_Return (procedure_LOCAL_NAME {, procedure_LOCAL_NAME});

Each PROCEDURE_LOCAL_NAME argument must refer to one or more procedure
declarations in the current declarative part.  A procedure to which this
pragma is applied may not contain any explicit `return' statements.  In
addition, if the procedure contains any implicit returns from falling
off the end of a statement sequence, then execution of that implicit
return will cause Program_Error to be raised.

   One use of this pragma is to identify procedures whose only purpose
is to raise an exception. Another use of this pragma is to suppress
incorrect warnings about missing returns in functions, where the last
statement of a function statement sequence is a call to such a
procedure.

   Note that in Ada 2005 mode, this pragma is part of the language, and
is identical in effect to the pragma as implemented in Ada 95 mode.


File: gnat_rm.info,  Node: Pragma No_Strict_Aliasing,  Next: Pragma Normalize_Scalars,  Prev: Pragma No_Return,  Up: Implementation Defined Pragmas

Pragma No_Strict_Aliasing
=========================

Syntax:

     pragma No_Strict_Aliasing [([Entity =>] type_LOCAL_NAME)];

TYPE_LOCAL_NAME must refer to an access type declaration in the current
declarative part.  The effect is to inhibit strict aliasing
optimization for the given type.  The form with no arguments is a
configuration pragma which applies to all access types declared in
units to which the pragma applies. For a detailed description of the
strict aliasing optimization, and the situations in which it must be
suppressed, see *Note Optimization and Strict Aliasing:
(gnat_ugn)Optimization and Strict Aliasing.

   This pragma currently has no effects on access to unconstrained
array types.


File: gnat_rm.info,  Node: Pragma Normalize_Scalars,  Next: Pragma Obsolescent,  Prev: Pragma No_Strict_Aliasing,  Up: Implementation Defined Pragmas

Pragma Normalize_Scalars
========================

Syntax:

     pragma Normalize_Scalars;

This is a language defined pragma which is fully implemented in GNAT.
The effect is to cause all scalar objects that are not otherwise
initialized to be initialized.  The initial values are implementation
dependent and are as follows:

`Standard.Character'
     Objects whose root type is Standard.Character are initialized to
     Character'Last unless the subtype range excludes NUL (in which case
     NUL is used). This choice will always generate an invalid value if
     one exists.

`Standard.Wide_Character'
     Objects whose root type is Standard.Wide_Character are initialized
     to Wide_Character'Last unless the subtype range excludes NUL (in
     which case NUL is used). This choice will always generate an
     invalid value if one exists.

`Standard.Wide_Wide_Character'
     Objects whose root type is Standard.Wide_Wide_Character are
     initialized to the invalid value 16#FFFF_FFFF# unless the subtype
     range excludes NUL (in which case NUL is used). This choice will
     always generate an invalid value if one exists.

`Integer types'
     Objects of an integer type are treated differently depending on
     whether negative values are present in the subtype. If no negative
     values are present, then all one bits is used as the initial value
     except in the special case where zero is excluded from the
     subtype, in which case all zero bits are used. This choice will
     always generate an invalid value if one exists.

     For subtypes with negative values present, the largest negative
     number is used, except in the unusual case where this largest
     negative number is in the subtype, and the largest positive number
     is not, in which case the largest positive value is used. This
     choice will always generate an invalid value if one exists.

`Floating-Point Types'
     Objects of all floating-point types are initialized to all 1-bits.
     For standard IEEE format, this corresponds to a NaN (not a number)
     which is indeed an invalid value.

`Fixed-Point Types'
     Objects of all fixed-point types are treated as described above
     for integers, with the rules applying to the underlying integer
     value used to represent the fixed-point value.

`Modular types'
     Objects of a modular type are initialized to all one bits, except
     in the special case where zero is excluded from the subtype, in
     which case all zero bits are used. This choice will always
     generate an invalid value if one exists.

`Enumeration types'
     Objects of an enumeration type are initialized to all one-bits,
     i.e. to the value `2 ** typ'Size - 1' unless the subtype excludes
     the literal whose Pos value is zero, in which case a code of zero
     is used. This choice will always generate an invalid value if one
     exists.



File: gnat_rm.info,  Node: Pragma Obsolescent,  Next: Pragma Optimize_Alignment,  Prev: Pragma Normalize_Scalars,  Up: Implementation Defined Pragmas

Pragma Obsolescent
==================

Syntax:

     pragma Obsolescent;

     pragma Obsolescent (
       [Message =>] static_string_EXPRESSION
     [,[Version =>] Ada_05]]);

     pragma Obsolescent (
       [Entity  =>] NAME
     [,[Message =>] static_string_EXPRESSION
     [,[Version =>] Ada_05]] );

This pragma can occur immediately following a declaration of an entity,
including the case of a record component. If no Entity argument is
present, then this declaration is the one to which the pragma applies.
If an Entity parameter is present, it must either match the name of the
entity in this declaration, or alternatively, the pragma can
immediately follow an enumeration type declaration, where the Entity
argument names one of the enumeration literals.

   This pragma is used to indicate that the named entity is considered
obsolescent and should not be used. Typically this is used when an API
must be modified by eventually removing or modifying existing
subprograms or other entities. The pragma can be used at an
intermediate stage when the entity is still present, but will be
removed later.

   The effect of this pragma is to output a warning message on a
reference to an entity thus marked that the subprogram is obsolescent
if the appropriate warning option in the compiler is activated. If the
Message parameter is present, then a second warning message is given
containing this text. In addition, a reference to the entity is
considered to be a violation of pragma Restrictions
(No_Obsolescent_Features).

   This pragma can also be used as a program unit pragma for a package,
in which case the entity name is the name of the package, and the
pragma indicates that the entire package is considered obsolescent. In
this case a client `with''ing such a package violates the restriction,
and the `with' statement is flagged with warnings if the warning option
is set.

   If the Version parameter is present (which must be exactly the
identifier Ada_05, no other argument is allowed), then the indication
of obsolescence applies only when compiling in Ada 2005 mode. This is
primarily intended for dealing with the situations in the predefined
library where subprograms or packages have become defined as
obsolescent in Ada 2005 (e.g. in Ada.Characters.Handling), but may be
used anywhere.

   The following examples show typical uses of this pragma:

     package p is
        pragma Obsolescent (p, Message => "use pp instead of p");
     end p;

     package q is
        procedure q2;
        pragma Obsolescent ("use q2new instead");

        type R is new integer;
        pragma Obsolescent
          (Entity  => R,
           Message => "use RR in Ada 2005",
           Version => Ada_05);

        type M is record
           F1 : Integer;
           F2 : Integer;
           pragma Obsolescent;
           F3 : Integer;
        end record;

        type E is (a, bc, 'd', quack);
        pragma Obsolescent (Entity => bc)
        pragma Obsolescent (Entity => 'd')

        function "+"
          (a, b : character) return character;
        pragma Obsolescent (Entity => "+");
     end;

Note that, as for all pragmas, if you use a pragma argument identifier,
then all subsequent parameters must also use a pragma argument
identifier.  So if you specify "Entity =>" for the Entity argument, and
a Message argument is present, it must be preceded by "Message =>".


File: gnat_rm.info,  Node: Pragma Optimize_Alignment,  Next: Pragma Ordered,  Prev: Pragma Obsolescent,  Up: Implementation Defined Pragmas

Pragma Optimize_Alignment
=========================

Syntax:

     pragma Optimize_Alignment (TIME | SPACE | OFF);

This is a configuration pragma which affects the choice of default
alignments for types where no alignment is explicitly specified. There
is a time/space trade-off in the selection of these values. Large
alignments result in more efficient code, at the expense of larger data
space, since sizes have to be increased to match these alignments.
Smaller alignments save space, but the access code is slower. The
normal choice of default alignments (which is what you get if you do
not use this pragma, or if you use an argument of OFF), tries to
balance these two requirements.

   Specifying SPACE causes smaller default alignments to be chosen in
two cases.  First any packed record is given an alignment of 1. Second,
if a size is given for the type, then the alignment is chosen to avoid
increasing this size. For example, consider:

        type R is record
           X : Integer;
           Y : Character;
        end record;

        for R'Size use 5*8;

In the default mode, this type gets an alignment of 4, so that access
to the Integer field X are efficient. But this means that objects of
the type end up with a size of 8 bytes. This is a valid choice, since
sizes of objects are allowed to be bigger than the size of the type,
but it can waste space if for example fields of type R appear in an
enclosing record. If the above type is compiled in `Optimize_Alignment
(Space)' mode, the alignment is set to 1.

   Specifying TIME causes larger default alignments to be chosen in the
case of small types with sizes that are not a power of 2. For example,
consider:

        type R is record
           A : Character;
           B : Character;
           C : Boolean;
        end record;

        pragma Pack (R);
        for R'Size use 17;

The default alignment for this record is normally 1, but if this type is
compiled in `Optimize_Alignment (Time)' mode, then the alignment is set
to 4, which wastes space for objects of the type, since they are now 4
bytes long, but results in more efficient access when the whole record
is referenced.

   As noted above, this is a configuration pragma, and there is a
requirement that all units in a partition be compiled with a consistent
setting of the optimization setting. This would normally be achieved by
use of a configuration pragma file containing the appropriate setting.
The exception to this rule is that units with an explicit configuration
pragma in the same file as the source unit are excluded from the
consistency check, as are all predefined units. The latter are compiled
by default in pragma Optimize_Alignment (Off) mode if no pragma appears
at the start of the file.


File: gnat_rm.info,  Node: Pragma Ordered,  Next: Pragma Passive,  Prev: Pragma Optimize_Alignment,  Up: Implementation Defined Pragmas

Pragma Ordered
==============

Syntax:

     pragma Ordered (enumeration_first_subtype_LOCAL_NAME);

Most enumeration types are from a conceptual point of view unordered.
For example, consider:

     type Color is (Red, Blue, Green, Yellow);

By Ada semantics `Blue > Red' and `Green > Blue', but really these
relations make no sense; the enumeration type merely specifies a set of
possible colors, and the order is unimportant.

   For unordered enumeration types, it is generally a good idea if
clients avoid comparisons (other than equality or inequality) and
explicit ranges. (A _client_ is a unit where the type is referenced,
other than the unit where the type is declared, its body, and its
subunits.)  For example, if code buried in some client says:

     if Current_Color < Yellow then ...
     if Current_Color in Blue .. Green then ...

then the client code is relying on the order, which is undesirable.  It
makes the code hard to read and creates maintenance difficulties if
entries have to be added to the enumeration type. Instead, the code in
the client should list the possibilities, or an appropriate subtype
should be declared in the unit that declares the original enumeration
type. E.g., the following subtype could be declared along with the type
`Color':

     subtype RBG is Color range Red .. Green;

and then the client could write:

     if Current_Color in RBG then ...
     if Current_Color = Blue or Current_Color = Green then ...

However, some enumeration types are legitimately ordered from a
conceptual point of view. For example, if you declare:

     type Day is (Mon, Tue, Wed, Thu, Fri, Sat, Sun);

then the ordering imposed by the language is reasonable, and clients
can depend on it, writing for example:

     if D in Mon .. Fri then ...
     if D < Wed then ...

The pragma `Ordered' is provided to mark enumeration types that are
conceptually ordered, alerting the reader that clients may depend on
the ordering. GNAT provides a pragma to mark enumerations as ordered
rather than one to mark them as unordered, since in our experience, the
great majority of enumeration types are conceptually unordered.

   The types `Boolean', `Character', `Wide_Character', and
`Wide_Wide_Character' are considered to be ordered types, so each is
declared with a pragma `Ordered' in package `Standard'.

   Normally pragma `Ordered' serves only as documentation and a guide
for coding standards, but GNAT provides a warning switch `-gnatw.u' that
requests warnings for inappropriate uses (comparisons and explicit
subranges) for unordered types. If this switch is used, then any
enumeration type not marked with pragma `Ordered' will be considered as
unordered, and will generate warnings for inappropriate uses.

   For additional information please refer to the description of the
`-gnatw.u' switch in the GNAT User's Guide.


File: gnat_rm.info,  Node: Pragma Passive,  Next: Pragma Persistent_BSS,  Prev: Pragma Ordered,  Up: Implementation Defined Pragmas

Pragma Passive
==============

Syntax:

     pragma Passive [(Semaphore | No)];

Syntax checked, but otherwise ignored by GNAT.  This is recognized for
compatibility with DEC Ada 83 implementations, where it is used within a
task definition to request that a task be made passive.  If the argument
`Semaphore' is present, or the argument is omitted, then DEC Ada 83
treats the pragma as an assertion that the containing task is passive
and that optimization of context switch with this task is permitted and
desired.  If the argument `No' is present, the task must not be
optimized.  GNAT does not attempt to optimize any tasks in this manner
(since protected objects are available in place of passive tasks).


File: gnat_rm.info,  Node: Pragma Persistent_BSS,  Next: Pragma Polling,  Prev: Pragma Passive,  Up: Implementation Defined Pragmas

Pragma Persistent_BSS
=====================

Syntax:

     pragma Persistent_BSS [(LOCAL_NAME)]

This pragma allows selected objects to be placed in the
`.persistent_bss' section. On some targets the linker and loader
provide for special treatment of this section, allowing a program to be
reloaded without affecting the contents of this data (hence the name
persistent).

   There are two forms of usage. If an argument is given, it must be the
local name of a library level object, with no explicit initialization
and whose type is potentially persistent. If no argument is given, then
the pragma is a configuration pragma, and applies to all library level
objects with no explicit initialization of potentially persistent types.

   A potentially persistent type is a scalar type, or a non-tagged,
non-discriminated record, all of whose components have no explicit
initialization and are themselves of a potentially persistent type, or
an array, all of whose constraints are static, and whose component type
is potentially persistent.

   If this pragma is used on a target where this feature is not
supported, then the pragma will be ignored. See also `pragma
Linker_Section'.


File: gnat_rm.info,  Node: Pragma Polling,  Next: Pragma Postcondition,  Prev: Pragma Persistent_BSS,  Up: Implementation Defined Pragmas

Pragma Polling
==============

Syntax:

     pragma Polling (ON | OFF);

This pragma controls the generation of polling code.  This is normally
off.  If `pragma Polling (ON)' is used then periodic calls are
generated to the routine `Ada.Exceptions.Poll'.  This routine is a
separate unit in the runtime library, and can be found in file
`a-excpol.adb'.

   Pragma `Polling' can appear as a configuration pragma (for example it
can be placed in the `gnat.adc' file) to enable polling globally, or it
can be used in the statement or declaration sequence to control polling
more locally.

   A call to the polling routine is generated at the start of every
loop and at the start of every subprogram call.  This guarantees that
the `Poll' routine is called frequently, and places an upper bound
(determined by the complexity of the code) on the period between two
`Poll' calls.

   The primary purpose of the polling interface is to enable
asynchronous aborts on targets that cannot otherwise support it (for
example Windows NT), but it may be used for any other purpose requiring
periodic polling.  The standard version is null, and can be replaced by
a user program.  This will require re-compilation of the
`Ada.Exceptions' package that can be found in files `a-except.ads' and
`a-except.adb'.

   A standard alternative unit (in file `4wexcpol.adb' in the standard
GNAT distribution) is used to enable the asynchronous abort capability
on targets that do not normally support the capability.  The version of
`Poll' in this file makes a call to the appropriate runtime routine to
test for an abort condition.

   Note that polling can also be enabled by use of the `-gnatP' switch.
*Note Switches for gcc: (gnat_ugn)Switches for gcc, for details.


File: gnat_rm.info,  Node: Pragma Postcondition,  Next: Pragma Precondition,  Prev: Pragma Polling,  Up: Implementation Defined Pragmas

Pragma Postcondition
====================

Syntax:

     pragma Postcondition (
        [Check   =>] Boolean_Expression
      [,[Message =>] String_Expression]);

The `Postcondition' pragma allows specification of automatic
postcondition checks for subprograms. These checks are similar to
assertions, but are automatically inserted just prior to the return
statements of the subprogram with which they are associated (including
implicit returns at the end of procedure bodies and associated
exception handlers).

   In addition, the boolean expression which is the condition which
must be true may contain references to function'Result in the case of a
function to refer to the returned value.

   `Postcondition' pragmas may appear either immediately following the
(separate) declaration of a subprogram, or at the start of the
declarations of a subprogram body. Only other pragmas may intervene
(that is appear between the subprogram declaration and its
postconditions, or appear before the postcondition in the declaration
sequence in a subprogram body). In the case of a postcondition
appearing after a subprogram declaration, the formal arguments of the
subprogram are visible, and can be referenced in the postcondition
expressions.

   The postconditions are collected and automatically tested just
before any return (implicit or explicit) in the subprogram body.  A
postcondition is only recognized if postconditions are active at the
time the pragma is encountered. The compiler switch `gnata' turns on
all postconditions by default, and pragma `Check_Policy' with an
identifier of `Postcondition' can also be used to control whether
postconditions are active.

   The general approach is that postconditions are placed in the spec
if they represent functional aspects which make sense to the client.
For example we might have:

        function Direction return Integer;
        pragma Postcondition
         (Direction'Result = +1
            or else
          Direction'Result = -1);

which serves to document that the result must be +1 or -1, and will
test that this is the case at run time if postcondition checking is
active.

   Postconditions within the subprogram body can be used to check that
some internal aspect of the implementation, not visible to the client,
is operating as expected.  For instance if a square root routine keeps
an internal counter of the number of times it is called, then we might
have the following postcondition:

        Sqrt_Calls : Natural := 0;

        function Sqrt (Arg : Float) return Float is
          pragma Postcondition
            (Sqrt_Calls = Sqrt_Calls'Old + 1);
          ...
        end Sqrt

As this example, shows, the use of the `Old' attribute is often useful
in postconditions to refer to the state on entry to the subprogram.

   Note that postconditions are only checked on normal returns from the
subprogram. If an abnormal return results from raising an exception,
then the postconditions are not checked.

   If a postcondition fails, then the exception
`System.Assertions.Assert_Failure' is raised. If a message argument was
supplied, then the given string will be used as the exception message.
If no message argument was supplied, then the default message has the
form "Postcondition failed at file:line". The exception is raised in
the context of the subprogram body, so it is possible to catch
postcondition failures within the subprogram body itself.

   Within a package spec, normal visibility rules in Ada would prevent
forward references within a postcondition pragma to functions defined
later in the same package. This would introduce undesirable ordering
constraints. To avoid this problem, all postcondition pragmas are
analyzed at the end of the package spec, allowing forward references.

   The following example shows that this even allows mutually recursive
postconditions as in:

     package Parity_Functions is
        function Odd  (X : Natural) return Boolean;
        pragma Postcondition
          (Odd'Result =
             (x = 1
               or else
             (x /= 0 and then Even (X - 1))));

        function Even (X : Natural) return Boolean;
        pragma Postcondition
          (Even'Result =
             (x = 0
               or else
             (x /= 1 and then Odd (X - 1))));

     end Parity_Functions;

There are no restrictions on the complexity or form of conditions used
within `Postcondition' pragmas.  The following example shows that it is
even possible to verify performance behavior.

     package Sort is

        Performance : constant Float;
        --  Performance constant set by implementation
        --  to match target architecture behavior.

        procedure Treesort (Arg : String);
        --  Sorts characters of argument using N*logN sort
        pragma Postcondition
          (Float (Clock - Clock'Old) <=
             Float (Arg'Length) *
             log (Float (Arg'Length)) *
             Performance);
     end Sort;

Note: postcondition pragmas associated with subprograms that are marked
as Inline_Always, or those marked as Inline with front-end inlining
(-gnatN option set) are accepted and legality-checked by the compiler,
but are ignored at run-time even if postcondition checking is enabled.


File: gnat_rm.info,  Node: Pragma Precondition,  Next: Pragma Profile (Ravenscar),  Prev: Pragma Postcondition,  Up: Implementation Defined Pragmas

Pragma Precondition
===================

Syntax:

     pragma Precondition (
        [Check   =>] Boolean_Expression
      [,[Message =>] String_Expression]);

The `Precondition' pragma is similar to `Postcondition' except that the
corresponding checks take place immediately upon entry to the
subprogram, and if a precondition fails, the exception is raised in the
context of the caller, and the attribute 'Result cannot be used within
the precondition expression.

   Otherwise, the placement and visibility rules are identical to those
described for postconditions. The following is an example of use within
a package spec:

     package Math_Functions is
        ...
        function Sqrt (Arg : Float) return Float;
        pragma Precondition (Arg >= 0.0)
        ...
     end Math_Functions;

`Precondition' pragmas may appear either immediately following the
(separate) declaration of a subprogram, or at the start of the
declarations of a subprogram body. Only other pragmas may intervene
(that is appear between the subprogram declaration and its
postconditions, or appear before the postcondition in the declaration
sequence in a subprogram body).

   Note: postcondition pragmas associated with subprograms that are
marked as Inline_Always, or those marked as Inline with front-end
inlining (-gnatN option set) are accepted and legality-checked by the
compiler, but are ignored at run-time even if postcondition checking is
enabled.


File: gnat_rm.info,  Node: Pragma Profile (Ravenscar),  Next: Pragma Profile (Restricted),  Prev: Pragma Precondition,  Up: Implementation Defined Pragmas

Pragma Profile (Ravenscar)
==========================

Syntax:

     pragma Profile (Ravenscar);

A configuration pragma that establishes the following set of
configuration pragmas:

`Task_Dispatching_Policy (FIFO_Within_Priorities)'
     [RM D.2.2] Tasks are dispatched following a preemptive
     priority-ordered scheduling policy.

`Locking_Policy (Ceiling_Locking)'
     [RM D.3] While tasks and interrupts execute a protected action,
     they inherit the ceiling priority of the corresponding protected
     object.
   plus the following set of restrictions:

`Max_Entry_Queue_Length => 1'
     No task can be queued on a protected entry.

`Max_Protected_Entries => 1'

`Max_Task_Entries => 0'
     No rendezvous statements are allowed.

`No_Abort_Statements'

`No_Dynamic_Attachment'

`No_Dynamic_Priorities'

`No_Implicit_Heap_Allocations'

`No_Local_Protected_Objects'

`No_Local_Timing_Events'

`No_Protected_Type_Allocators'

`No_Relative_Delay'

`No_Requeue_Statements'

`No_Select_Statements'

`No_Specific_Termination_Handlers'

`No_Task_Allocators'

`No_Task_Hierarchy'

`No_Task_Termination'

`Simple_Barriers'
   The Ravenscar profile also includes the following restrictions that
specify that there are no semantic dependences on the corresponding
predefined packages:

`No_Dependence => Ada.Asynchronous_Task_Control'

`No_Dependence => Ada.Calendar'

`No_Dependence => Ada.Execution_Time.Group_Budget'

`No_Dependence => Ada.Execution_Time.Timers'

`No_Dependence => Ada.Task_Attributes'

`No_Dependence => System.Multiprocessors.Dispatching_Domains'

This set of configuration pragmas and restrictions correspond to the
definition of the "Ravenscar Profile" for limited tasking, devised and
published by the `International Real-Time Ada Workshop', 1997, and
whose most recent description is available at
`http://www-users.cs.york.ac.uk/~burns/ravenscar.ps'.

   The original definition of the profile was revised at subsequent
IRTAW meetings. It has been included in the ISO `Guide for the Use of
the Ada Programming Language in High Integrity Systems', and has been
approved by ISO/IEC/SC22/WG9 for inclusion in the next revision of the
standard. The formal definition given by the Ada Rapporteur Group (ARG)
can be found in two Ada Issues (AI-249 and AI-305) available at
`http://www.ada-auth.org/cgi-bin/cvsweb.cgi/ais/ai-00249.txt' and
`http://www.ada-auth.org/cgi-bin/cvsweb.cgi/ais/ai-00305.txt'.

   The above set is a superset of the restrictions provided by pragma
`Profile (Restricted)', it includes six additional restrictions
(`Simple_Barriers', `No_Select_Statements', `No_Calendar',
`No_Implicit_Heap_Allocations', `No_Relative_Delay' and
`No_Task_Termination').  This means that pragma `Profile (Ravenscar)',
like the pragma `Profile (Restricted)', automatically causes the use of
a simplified, more efficient version of the tasking run-time system.


File: gnat_rm.info,  Node: Pragma Profile (Restricted),  Next: Pragma Psect_Object,  Prev: Pragma Profile (Ravenscar),  Up: Implementation Defined Pragmas

Pragma Profile (Restricted)
===========================

Syntax:

     pragma Profile (Restricted);

A configuration pragma that establishes the following set of
restrictions:

   * No_Abort_Statements

   * No_Entry_Queue

   * No_Task_Hierarchy

   * No_Task_Allocators

   * No_Dynamic_Priorities

   * No_Terminate_Alternatives

   * No_Dynamic_Attachment

   * No_Protected_Type_Allocators

   * No_Local_Protected_Objects

   * No_Requeue_Statements

   * No_Task_Attributes_Package

   * Max_Asynchronous_Select_Nesting =  0

   * Max_Task_Entries =  0

   * Max_Protected_Entries = 1

   * Max_Select_Alternatives = 0

This set of restrictions causes the automatic selection of a simplified
version of the run time that provides improved performance for the
limited set of tasking functionality permitted by this set of
restrictions.


File: gnat_rm.info,  Node: Pragma Psect_Object,  Next: Pragma Pure_Function,  Prev: Pragma Profile (Restricted),  Up: Implementation Defined Pragmas

Pragma Psect_Object
===================

Syntax:

     pragma Psect_Object (
          [Internal =>] LOCAL_NAME,
       [, [External =>] EXTERNAL_SYMBOL]
       [, [Size     =>] EXTERNAL_SYMBOL]);

     EXTERNAL_SYMBOL ::=
       IDENTIFIER
     | static_string_EXPRESSION

This pragma is identical in effect to pragma `Common_Object'.


File: gnat_rm.info,  Node: Pragma Pure_Function,  Next: Pragma Remote_Access_Type,  Prev: Pragma Psect_Object,  Up: Implementation Defined Pragmas

Pragma Pure_Function
====================

Syntax:

     pragma Pure_Function ([Entity =>] function_LOCAL_NAME);

This pragma appears in the same declarative part as a function
declaration (or a set of function declarations if more than one
overloaded declaration exists, in which case the pragma applies to all
entities).  It specifies that the function `Entity' is to be considered
pure for the purposes of code generation.  This means that the compiler
can assume that there are no side effects, and in particular that two
calls with identical arguments produce the same result.  It also means
that the function can be used in an address clause.

   Note that, quite deliberately, there are no static checks to try to
ensure that this promise is met, so `Pure_Function' can be used with
functions that are conceptually pure, even if they do modify global
variables.  For example, a square root function that is instrumented to
count the number of times it is called is still conceptually pure, and
can still be optimized, even though it modifies a global variable (the
count).  Memo functions are another example (where a table of previous
calls is kept and consulted to avoid re-computation).

   Note also that the normal rules excluding optimization of subprograms
in pure units (when parameter types are descended from System.Address,
or when the full view of a parameter type is limited), do not apply for
the Pure_Function case. If you explicitly specify Pure_Function, the
compiler may optimize away calls with identical arguments, and if that
results in unexpected behavior, the proper action is not to use the
pragma for subprograms that are not (conceptually) pure.

   Note: Most functions in a `Pure' package are automatically pure, and
there is no need to use pragma `Pure_Function' for such functions.  One
exception is any function that has at least one formal of type
`System.Address' or a type derived from it.  Such functions are not
considered pure by default, since the compiler assumes that the
`Address' parameter may be functioning as a pointer and that the
referenced data may change even if the address value does not.
Similarly, imported functions are not considered to be pure by default,
since there is no way of checking that they are in fact pure.  The use
of pragma `Pure_Function' for such a function will override these
default assumption, and cause the compiler to treat a designated
subprogram as pure in these cases.

   Note: If pragma `Pure_Function' is applied to a renamed function, it
applies to the underlying renamed function.  This can be used to
disambiguate cases of overloading where some but not all functions in a
set of overloaded functions are to be designated as pure.

   If pragma `Pure_Function' is applied to a library level function, the
function is also considered pure from an optimization point of view,
but the unit is not a Pure unit in the categorization sense. So for
example, a function thus marked is free to `with' non-pure units.


File: gnat_rm.info,  Node: Pragma Remote_Access_Type,  Next: Pragma Restriction_Warnings,  Prev: Pragma Pure_Function,  Up: Implementation Defined Pragmas

Pragma Remote_Access_Type
=========================

Syntax:

     pragma Remote_Access_Type ([Entity =>] formal_access_type_LOCAL_NAME);

This pragma appears in the formal part of a generic declaration.  It
specifies an exception to the RM rule from E.2.2(17/2), which forbids
the use of a remote access to class-wide type as actual for a formal
access type.

   When this pragma applies to a formal access type `Entity', that type
is treated as a remote access to class-wide type in the generic.  It
must be a formal general access type, and its designated type must be
the class-wide type of a formal tagged limited private type from the
same generic declaration.

   In the generic unit, the formal type is subject to all restrictions
pertaining to remote access to class-wide types. At instantiation, the
actual type must be a remote access to class-wide type.


File: gnat_rm.info,  Node: Pragma Restriction_Warnings,  Next: Pragma Shared,  Prev: Pragma Remote_Access_Type,  Up: Implementation Defined Pragmas

Pragma Restriction_Warnings
===========================

Syntax:

     pragma Restriction_Warnings
       (restriction_IDENTIFIER {, restriction_IDENTIFIER});

This pragma allows a series of restriction identifiers to be specified
(the list of allowed identifiers is the same as for pragma
`Restrictions'). For each of these identifiers the compiler checks for
violations of the restriction, but generates a warning message rather
than an error message if the restriction is violated.


File: gnat_rm.info,  Node: Pragma Shared,  Next: Pragma Short_Circuit_And_Or,  Prev: Pragma Restriction_Warnings,  Up: Implementation Defined Pragmas

Pragma Shared
=============

This pragma is provided for compatibility with Ada 83. The syntax and
semantics are identical to pragma Atomic.


File: gnat_rm.info,  Node: Pragma Short_Circuit_And_Or,  Next: Pragma Short_Descriptors,  Prev: Pragma Shared,  Up: Implementation Defined Pragmas

Pragma Short_Circuit_And_Or
===========================

This configuration pragma causes any occurrence of the AND operator
applied to operands of type Standard.Boolean to be short-circuited
(i.e. the AND operator is treated as if it were AND THEN). Or is
similarly treated as OR ELSE. This may be useful in the context of
certification protocols requiring the use of short-circuited logical
operators. If this configuration pragma occurs locally within the file
being compiled, it applies only to the file being compiled.  There is
no requirement that all units in a partition use this option.


File: gnat_rm.info,  Node: Pragma Short_Descriptors,  Next: Pragma Simple_Storage_Pool_Type,  Prev: Pragma Short_Circuit_And_Or,  Up: Implementation Defined Pragmas

Pragma Short_Descriptors
========================

Syntax:

     pragma Short_Descriptors

In VMS versions of the compiler, this configuration pragma causes all
occurrences of the mechanism types Descriptor[_xxx] to be treated as
Short_Descriptor[_xxx]. This is helpful in porting legacy applications
from a 32-bit environment to a 64-bit environment. This pragma is
ignored for non-VMS versions.


File: gnat_rm.info,  Node: Pragma Simple_Storage_Pool_Type,  Next: Pragma Source_File_Name,  Prev: Pragma Short_Descriptors,  Up: Implementation Defined Pragmas

Pragma Simple_Storage_Pool_Type
===============================

Syntax:

     pragma Simple_Storage_Pool_Type (type_LOCAL_NAME);

A type can be established as a "simple storage pool type" by applying
the representation pragma `Simple_Storage_Pool_Type' to the type.  A
type named in the pragma must be a library-level immutably limited
record type or limited tagged type declared immediately within a
package declaration.  The type can also be a limited private type whose
full type is allowed as a simple storage pool type.

   For a simple storage pool type SSP, nonabstract primitive subprograms
`Allocate', `Deallocate', and `Storage_Size' can be declared that are
subtype conformant with the following subprogram declarations:

     procedure Allocate
       (Pool                     : in out SSP;
        Storage_Address          : out System.Address;
        Size_In_Storage_Elements : System.Storage_Elements.Storage_Count;
        Alignment                : System.Storage_Elements.Storage_Count);

     procedure Deallocate
       (Pool : in out SSP;
        Storage_Address          : System.Address;
        Size_In_Storage_Elements : System.Storage_Elements.Storage_Count;
        Alignment                : System.Storage_Elements.Storage_Count);

     function Storage_Size (Pool : SSP)
       return System.Storage_Elements.Storage_Count;

Procedure `Allocate' must be declared, whereas `Deallocate' and
`Storage_Size' are optional. If `Deallocate' is not declared, then
applying an unchecked deallocation has no effect other than to set its
actual parameter to null. If `Storage_Size' is not declared, then the
`Storage_Size' attribute applied to an access type associated with a
pool object of type SSP returns zero. Additional operations can be
declared for a simple storage pool type (such as for supporting a
mark/release storage-management discipline).

   An object of a simple storage pool type can be associated with an
access type by specifying the attribute `Simple_Storage_Pool'. For
example:


     My_Pool : My_Simple_Storage_Pool_Type;

     type Acc is access My_Data_Type;

     for Acc'Simple_Storage_Pool use My_Pool;

See attribute `Simple_Storage_Pool' for further details.


File: gnat_rm.info,  Node: Pragma Source_File_Name,  Next: Pragma Source_File_Name_Project,  Prev: Pragma Simple_Storage_Pool_Type,  Up: Implementation Defined Pragmas

Pragma Source_File_Name
=======================

Syntax:

     pragma Source_File_Name (
       [Unit_Name   =>] unit_NAME,
       Spec_File_Name =>  STRING_LITERAL,
       [Index => INTEGER_LITERAL]);

     pragma Source_File_Name (
       [Unit_Name   =>] unit_NAME,
       Body_File_Name =>  STRING_LITERAL,
       [Index => INTEGER_LITERAL]);

Use this to override the normal naming convention.  It is a
configuration pragma, and so has the usual applicability of
configuration pragmas (i.e. it applies to either an entire partition,
or to all units in a compilation, or to a single unit, depending on how
it is used.  UNIT_NAME is mapped to FILE_NAME_LITERAL.  The identifier
for the second argument is required, and indicates whether this is the
file name for the spec or for the body.

   The optional Index argument should be used when a file contains
multiple units, and when you do not want to use `gnatchop' to separate
then into multiple files (which is the recommended procedure to limit
the number of recompilations that are needed when some sources change).
For instance, if the source file `source.ada' contains

     package B is
     ...
     end B;

     with B;
     procedure A is
     begin
        ..
     end A;

   you could use the following configuration pragmas:

     pragma Source_File_Name
       (B, Spec_File_Name => "source.ada", Index => 1);
     pragma Source_File_Name
       (A, Body_File_Name => "source.ada", Index => 2);

   Note that the `gnatname' utility can also be used to generate those
configuration pragmas.

   Another form of the `Source_File_Name' pragma allows the
specification of patterns defining alternative file naming schemes to
apply to all files.

     pragma Source_File_Name
       (  [Spec_File_Name  =>] STRING_LITERAL
        [,[Casing          =>] CASING_SPEC]
        [,[Dot_Replacement =>] STRING_LITERAL]);

     pragma Source_File_Name
       (  [Body_File_Name  =>] STRING_LITERAL
        [,[Casing          =>] CASING_SPEC]
        [,[Dot_Replacement =>] STRING_LITERAL]);

     pragma Source_File_Name
       (  [Subunit_File_Name =>] STRING_LITERAL
        [,[Casing            =>] CASING_SPEC]
        [,[Dot_Replacement   =>] STRING_LITERAL]);

     CASING_SPEC ::= Lowercase | Uppercase | Mixedcase

The first argument is a pattern that contains a single asterisk
indicating the point at which the unit name is to be inserted in the
pattern string to form the file name.  The second argument is optional.
If present it specifies the casing of the unit name in the resulting
file name string.  The default is lower case.  Finally the third
argument allows for systematic replacement of any dots in the unit name
by the specified string literal.

   Note that Source_File_Name pragmas should not be used if you are
using project files. The reason for this rule is that the project
manager is not aware of these pragmas, and so other tools that use the
projet file would not be aware of the intended naming conventions. If
you are using project files, file naming is controlled by
Source_File_Name_Project pragmas, which are usually supplied
automatically by the project manager. A pragma Source_File_Name cannot
appear after a *Note Pragma Source_File_Name_Project::.

   For more details on the use of the `Source_File_Name' pragma, *Note
Using Other File Names: (gnat_ugn)Using Other File Names, and *Note
Alternative File Naming Schemes: (gnat_ugn)Alternative File Naming
Schemes.


File: gnat_rm.info,  Node: Pragma Source_File_Name_Project,  Next: Pragma Source_Reference,  Prev: Pragma Source_File_Name,  Up: Implementation Defined Pragmas

Pragma Source_File_Name_Project
===============================

This pragma has the same syntax and semantics as pragma
Source_File_Name.  It is only allowed as a stand alone configuration
pragma.  It cannot appear after a *Note Pragma Source_File_Name::, and
most importantly, once pragma Source_File_Name_Project appears, no
further Source_File_Name pragmas are allowed.

   The intention is that Source_File_Name_Project pragmas are always
generated by the Project Manager in a manner consistent with the naming
specified in a project file, and when naming is controlled in this
manner, it is not permissible to attempt to modify this naming scheme
using Source_File_Name or Source_File_Name_Project pragmas (which would
not be known to the project manager).


File: gnat_rm.info,  Node: Pragma Source_Reference,  Next: Pragma Static_Elaboration_Desired,  Prev: Pragma Source_File_Name_Project,  Up: Implementation Defined Pragmas

Pragma Source_Reference
=======================

Syntax:

     pragma Source_Reference (INTEGER_LITERAL, STRING_LITERAL);

This pragma must appear as the first line of a source file.
INTEGER_LITERAL is the logical line number of the line following the
pragma line (for use in error messages and debugging information).
STRING_LITERAL is a static string constant that specifies the file name
to be used in error messages and debugging information.  This is most
notably used for the output of `gnatchop' with the `-r' switch, to make
sure that the original unchopped source file is the one referred to.

   The second argument must be a string literal, it cannot be a static
string expression other than a string literal.  This is because its
value is needed for error messages issued by all phases of the compiler.


File: gnat_rm.info,  Node: Pragma Static_Elaboration_Desired,  Next: Pragma Stream_Convert,  Prev: Pragma Source_Reference,  Up: Implementation Defined Pragmas

Pragma Static_Elaboration_Desired
=================================

Syntax:

     pragma Static_Elaboration_Desired;

This pragma is used to indicate that the compiler should attempt to
initialize statically the objects declared in the library unit to which
the pragma applies, when these objects are initialized (explicitly or
implicitly) by an aggregate.  In the absence of this pragma, aggregates
in object declarations are expanded into assignments and loops, even
when the aggregate components are static constants. When the aggregate
is present the compiler builds a static expression that requires no
run-time code, so that the initialized object can be placed in
read-only data space. If the components are not static, or the
aggregate has more that 100 components, the compiler emits a warning
that the pragma cannot be obeyed. (See also the restriction
No_Implicit_Loops, which supports static construction of larger
aggregates with static components that include an others choice.)


File: gnat_rm.info,  Node: Pragma Stream_Convert,  Next: Pragma Style_Checks,  Prev: Pragma Static_Elaboration_Desired,  Up: Implementation Defined Pragmas

Pragma Stream_Convert
=====================

Syntax:

     pragma Stream_Convert (
       [Entity =>] type_LOCAL_NAME,
       [Read   =>] function_NAME,
       [Write  =>] function_NAME);

This pragma provides an efficient way of providing stream functions for
types defined in packages.  Not only is it simpler to use than declaring
the necessary functions with attribute representation clauses, but more
significantly, it allows the declaration to made in such a way that the
stream packages are not loaded unless they are needed.  The use of the
Stream_Convert pragma adds no overhead at all, unless the stream
attributes are actually used on the designated type.

   The first argument specifies the type for which stream functions are
provided.  The second parameter provides a function used to read values
of this type.  It must name a function whose argument type may be any
subtype, and whose returned type must be the type given as the first
argument to the pragma.

   The meaning of the READ parameter is that if a stream attribute
directly or indirectly specifies reading of the type given as the first
parameter, then a value of the type given as the argument to the Read
function is read from the stream, and then the Read function is used to
convert this to the required target type.

   Similarly the WRITE parameter specifies how to treat write attributes
that directly or indirectly apply to the type given as the first
parameter.  It must have an input parameter of the type specified by
the first parameter, and the return type must be the same as the input
type of the Read function.  The effect is to first call the Write
function to convert to the given stream type, and then write the result
type to the stream.

   The Read and Write functions must not be overloaded subprograms.  If
necessary renamings can be supplied to meet this requirement.  The
usage of this attribute is best illustrated by a simple example, taken
from the GNAT implementation of package Ada.Strings.Unbounded:

     function To_Unbounded (S : String)
                return Unbounded_String
       renames To_Unbounded_String;

     pragma Stream_Convert
       (Unbounded_String, To_Unbounded, To_String);

The specifications of the referenced functions, as given in the Ada
Reference Manual are:

     function To_Unbounded_String (Source : String)
       return Unbounded_String;

     function To_String (Source : Unbounded_String)
       return String;

The effect is that if the value of an unbounded string is written to a
stream, then the representation of the item in the stream is in the
same format that would be used for `Standard.String'Output', and this
same representation is expected when a value of this type is read from
the stream. Note that the value written always includes the bounds,
even for Unbounded_String'Write, since Unbounded_String is not an array
type.


File: gnat_rm.info,  Node: Pragma Style_Checks,  Next: Pragma Subtitle,  Prev: Pragma Stream_Convert,  Up: Implementation Defined Pragmas

Pragma Style_Checks
===================

Syntax:

     pragma Style_Checks (string_LITERAL | ALL_CHECKS |
                          On | Off [, LOCAL_NAME]);

This pragma is used in conjunction with compiler switches to control the
built in style checking provided by GNAT.  The compiler switches, if
set, provide an initial setting for the switches, and this pragma may
be used to modify these settings, or the settings may be provided
entirely by the use of the pragma.  This pragma can be used anywhere
that a pragma is legal, including use as a configuration pragma
(including use in the `gnat.adc' file).

   The form with a string literal specifies which style options are to
be activated.  These are additive, so they apply in addition to any
previously set style check options.  The codes for the options are the
same as those used in the `-gnaty' switch to `gcc' or `gnatmake'.  For
example the following two methods can be used to enable layout checking:

   *      pragma Style_Checks ("l");

   *      gcc -c -gnatyl ...

The form ALL_CHECKS activates all standard checks (its use is equivalent
to the use of the `gnaty' switch with no options.  *Note GNAT User's
Guide: (gnat_ugn)Top, for details.)

   Note: the behavior is slightly different in GNAT mode (`-gnatg'
used).  In this case, ALL_CHECKS implies the standard set of GNAT mode
style check options (i.e. equivalent to -gnatyg).

   The forms with `Off' and `On' can be used to temporarily disable
style checks as shown in the following example:

     pragma Style_Checks ("k"); -- requires keywords in lower case
     pragma Style_Checks (Off); -- turn off style checks
     NULL;                      -- this will not generate an error message
     pragma Style_Checks (On);  -- turn style checks back on
     NULL;                      -- this will generate an error message

Finally the two argument form is allowed only if the first argument is
`On' or `Off'.  The effect is to turn of semantic style checks for the
specified entity, as shown in the following example:

     pragma Style_Checks ("r"); -- require consistency of identifier casing
     Arg : Integer;
     Rf1 : Integer := ARG;      -- incorrect, wrong case
     pragma Style_Checks (Off, Arg);
     Rf2 : Integer := ARG;      -- OK, no error


File: gnat_rm.info,  Node: Pragma Subtitle,  Next: Pragma Suppress,  Prev: Pragma Style_Checks,  Up: Implementation Defined Pragmas

Pragma Subtitle
===============

Syntax:

     pragma Subtitle ([Subtitle =>] STRING_LITERAL);

This pragma is recognized for compatibility with other Ada compilers
but is ignored by GNAT.


File: gnat_rm.info,  Node: Pragma Suppress,  Next: Pragma Suppress_All,  Prev: Pragma Subtitle,  Up: Implementation Defined Pragmas

Pragma Suppress
===============

Syntax:

     pragma Suppress (Identifier [, [On =>] Name]);

This is a standard pragma, and supports all the check names required in
the RM. It is included here because GNAT recognizes one additional check
name: `Alignment_Check' which can be used to suppress alignment checks
on addresses used in address clauses. Such checks can also be suppressed
by suppressing range checks, but the specific use of `Alignment_Check'
allows suppression of alignment checks without suppressing other range
checks.

   Note that pragma Suppress gives the compiler permission to omit
checks, but does not require the compiler to omit checks. The compiler
will generate checks if they are essentially free, even when they are
suppressed. In particular, if the compiler can prove that a certain
check will necessarily fail, it will generate code to do an
unconditional "raise", even if checks are suppressed. The compiler
warns in this case.

   Of course, run-time checks are omitted whenever the compiler can
prove that they will not fail, whether or not checks are suppressed.


File: gnat_rm.info,  Node: Pragma Suppress_All,  Next: Pragma Suppress_Exception_Locations,  Prev: Pragma Suppress,  Up: Implementation Defined Pragmas

Pragma Suppress_All
===================

Syntax:

     pragma Suppress_All;

This pragma can appear anywhere within a unit.  The effect is to apply
`Suppress (All_Checks)' to the unit in which it appears.  This pragma
is implemented for compatibility with DEC Ada 83 usage where it appears
at the end of a unit, and for compatibility with Rational Ada, where it
appears as a program unit pragma.  The use of the standard Ada pragma
`Suppress (All_Checks)' as a normal configuration pragma is the
preferred usage in GNAT.


File: gnat_rm.info,  Node: Pragma Suppress_Exception_Locations,  Next: Pragma Suppress_Initialization,  Prev: Pragma Suppress_All,  Up: Implementation Defined Pragmas

Pragma Suppress_Exception_Locations
===================================

Syntax:

     pragma Suppress_Exception_Locations;

In normal mode, a raise statement for an exception by default generates
an exception message giving the file name and line number for the
location of the raise. This is useful for debugging and logging
purposes, but this entails extra space for the strings for the
messages. The configuration pragma `Suppress_Exception_Locations' can
be used to suppress the generation of these strings, with the result
that space is saved, but the exception message for such raises is null.
This configuration pragma may appear in a global configuration pragma
file, or in a specific unit as usual. It is not required that this
pragma be used consistently within a partition, so it is fine to have
some units within a partition compiled with this pragma and others
compiled in normal mode without it.


File: gnat_rm.info,  Node: Pragma Suppress_Initialization,  Next: Pragma Task_Info,  Prev: Pragma Suppress_Exception_Locations,  Up: Implementation Defined Pragmas

Pragma Suppress_Initialization
==============================

Syntax:

     pragma Suppress_Initialization ([Entity =>] subtype_Name);

Here subtype_Name is the name introduced by a type declaration or
subtype declaration.  This pragma suppresses any implicit or explicit
initialization for all variables of the given type or subtype,
including initialization resulting from the use of pragmas
Normalize_Scalars or Initialize_Scalars.

   This is considered a representation item, so it cannot be given after
the type is frozen. It applies to all subsequent object declarations,
and also any allocator that creates objects of the type.

   If the pragma is given for the first subtype, then it is considered
to apply to the base type and all its subtypes. If the pragma is given
for other than a first subtype, then it applies only to the given
subtype.  The pragma may not be given after the type is frozen.


File: gnat_rm.info,  Node: Pragma Task_Info,  Next: Pragma Task_Name,  Prev: Pragma Suppress_Initialization,  Up: Implementation Defined Pragmas

Pragma Task_Info
================

Syntax

     pragma Task_Info (EXPRESSION);

This pragma appears within a task definition (like pragma `Priority')
and applies to the task in which it appears.  The argument must be of
type `System.Task_Info.Task_Info_Type'.  The `Task_Info' pragma
provides system dependent control over aspects of tasking
implementation, for example, the ability to map tasks to specific
processors.  For details on the facilities available for the version of
GNAT that you are using, see the documentation in the spec of package
System.Task_Info in the runtime library.


File: gnat_rm.info,  Node: Pragma Task_Name,  Next: Pragma Task_Storage,  Prev: Pragma Task_Info,  Up: Implementation Defined Pragmas

Pragma Task_Name
================

Syntax

     pragma Task_Name (string_EXPRESSION);

This pragma appears within a task definition (like pragma `Priority')
and applies to the task in which it appears.  The argument must be of
type String, and provides a name to be used for the task instance when
the task is created.  Note that this expression is not required to be
static, and in particular, it can contain references to task
discriminants.  This facility can be used to provide different names
for different tasks as they are created, as illustrated in the example
below.

   The task name is recorded internally in the run-time structures and
is accessible to tools like the debugger.  In addition the routine
`Ada.Task_Identification.Image' will return this string, with a unique
task address appended.

     --  Example of the use of pragma Task_Name

     with Ada.Task_Identification;
     use Ada.Task_Identification;
     with Text_IO; use Text_IO;
     procedure t3 is

        type Astring is access String;

        task type Task_Typ (Name : access String) is
           pragma Task_Name (Name.all);
        end Task_Typ;

        task body Task_Typ is
           Nam : constant String := Image (Current_Task);
        begin
           Put_Line ("-->" & Nam (1 .. 14) & "<--");
        end Task_Typ;

        type Ptr_Task is access Task_Typ;
        Task_Var : Ptr_Task;

     begin
        Task_Var :=
          new Task_Typ (new String'("This is task 1"));
        Task_Var :=
          new Task_Typ (new String'("This is task 2"));
     end;


File: gnat_rm.info,  Node: Pragma Task_Storage,  Next: Pragma Test_Case,  Prev: Pragma Task_Name,  Up: Implementation Defined Pragmas

Pragma Task_Storage
===================

Syntax:

     pragma Task_Storage (
       [Task_Type =>] LOCAL_NAME,
       [Top_Guard =>] static_integer_EXPRESSION);

This pragma specifies the length of the guard area for tasks.  The guard
area is an additional storage area allocated to a task.  A value of zero
means that either no guard area is created or a minimal guard area is
created, depending on the target.  This pragma can appear anywhere a
`Storage_Size' attribute definition clause is allowed for a task type.


File: gnat_rm.info,  Node: Pragma Test_Case,  Next: Pragma Thread_Local_Storage,  Prev: Pragma Task_Storage,  Up: Implementation Defined Pragmas

Pragma Test_Case
================

Syntax:

     pragma Test_Case (
        [Name     =>] static_string_Expression
       ,[Mode     =>] (Nominal | Robustness)
      [, Requires =>  Boolean_Expression]
      [, Ensures  =>  Boolean_Expression]);

The `Test_Case' pragma allows defining fine-grain specifications for
use by testing and verification tools. The compiler checks its validity
but the presence of pragma `Test_Case' does not lead to any
modification of the code generated by the compiler.

   `Test_Case' pragmas may only appear immediately following the
(separate) declaration of a subprogram in a package declaration, inside
a package spec unit. Only other pragmas may intervene (that is appear
between the subprogram declaration and a test case).

   The compiler checks that boolean expressions given in `Requires' and
`Ensures' are valid, where the rules for `Requires' are the same as the
rule for an expression in `Precondition' and the rules for `Ensures'
are the same as the rule for an expression in `Postcondition'. In
particular, attributes `'Old' and `'Result' can only be used within the
`Ensures' expression. The following is an example of use within a
package spec:

     package Math_Functions is
        ...
        function Sqrt (Arg : Float) return Float;
        pragma Test_Case (Name     => "Test 1",
                          Mode     => Nominal,
                          Requires => Arg < 100,
                          Ensures  => Sqrt'Result < 10);
        ...
     end Math_Functions;

The meaning of a test case is that, if the associated subprogram is
executed in a context where `Requires' holds, then `Ensures' should
hold when the subprogram returns. Mode `Nominal' indicates that the
input context should satisfy the precondition of the subprogram, and
the output context should then satisfy its postcondition. More
`Robustness' indicates that the pre- and postcondition of the
subprogram should be ignored for this test case.


File: gnat_rm.info,  Node: Pragma Thread_Local_Storage,  Next: Pragma Time_Slice,  Prev: Pragma Test_Case,  Up: Implementation Defined Pragmas

Pragma Thread_Local_Storage
===========================

Syntax:

     pragma Thread_Local_Storage ([Entity =>] LOCAL_NAME);

This pragma specifies that the specified entity, which must be a
variable declared in a library level package, is to be marked as
"Thread Local Storage" (`TLS'). On systems supporting this (which
include Solaris, GNU/Linux and VxWorks 6), this causes each thread (and
hence each Ada task) to see a distinct copy of the variable.

   The variable may not have default initialization, and if there is an
explicit initialization, it must be either `null' for an access
variable, or a static expression for a scalar variable.  This provides
a low level mechanism similar to that provided by the
`Ada.Task_Attributes' package, but much more efficient and is also
useful in writing interface code that will interact with foreign
threads.

   If this pragma is used on a system where `TLS' is not supported,
then an error message will be generated and the program will be
rejected.


File: gnat_rm.info,  Node: Pragma Time_Slice,  Next: Pragma Title,  Prev: Pragma Thread_Local_Storage,  Up: Implementation Defined Pragmas

Pragma Time_Slice
=================

Syntax:

     pragma Time_Slice (static_duration_EXPRESSION);

For implementations of GNAT on operating systems where it is possible
to supply a time slice value, this pragma may be used for this purpose.
It is ignored if it is used in a system that does not allow this
control, or if it appears in other than the main program unit.  Note
that the effect of this pragma is identical to the effect of the DEC
Ada 83 pragma of the same name when operating under OpenVMS systems.


File: gnat_rm.info,  Node: Pragma Title,  Next: Pragma Unchecked_Union,  Prev: Pragma Time_Slice,  Up: Implementation Defined Pragmas

Pragma Title
============

Syntax:

     pragma Title (TITLING_OPTION [, TITLING OPTION]);

     TITLING_OPTION ::=
       [Title    =>] STRING_LITERAL,
     | [Subtitle =>] STRING_LITERAL

Syntax checked but otherwise ignored by GNAT.  This is a listing control
pragma used in DEC Ada 83 implementations to provide a title and/or
subtitle for the program listing.  The program listing generated by GNAT
does not have titles or subtitles.

   Unlike other pragmas, the full flexibility of named notation is
allowed for this pragma, i.e. the parameters may be given in any order
if named notation is used, and named and positional notation can be
mixed following the normal rules for procedure calls in Ada.


File: gnat_rm.info,  Node: Pragma Unchecked_Union,  Next: Pragma Unimplemented_Unit,  Prev: Pragma Title,  Up: Implementation Defined Pragmas

Pragma Unchecked_Union
======================

Syntax:

     pragma Unchecked_Union (first_subtype_LOCAL_NAME);

This pragma is used to specify a representation of a record type that is
equivalent to a C union. It was introduced as a GNAT implementation
defined pragma in the GNAT Ada 95 mode. Ada 2005 includes an extended
version of this pragma, making it language defined, and GNAT fully
implements this extended version in all language modes (Ada 83, Ada 95,
and Ada 2005). For full details, consult the Ada 2005 Reference Manual,
section B.3.3.


File: gnat_rm.info,  Node: Pragma Unimplemented_Unit,  Next: Pragma Universal_Aliasing,  Prev: Pragma Unchecked_Union,  Up: Implementation Defined Pragmas

Pragma Unimplemented_Unit
=========================

Syntax:

     pragma Unimplemented_Unit;

If this pragma occurs in a unit that is processed by the compiler, GNAT
aborts with the message `XXX not implemented', where XXX is the name of
the current compilation unit.  This pragma is intended to allow the
compiler to handle unimplemented library units in a clean manner.

   The abort only happens if code is being generated.  Thus you can use
specs of unimplemented packages in syntax or semantic checking mode.


File: gnat_rm.info,  Node: Pragma Universal_Aliasing,  Next: Pragma Universal_Data,  Prev: Pragma Unimplemented_Unit,  Up: Implementation Defined Pragmas

Pragma Universal_Aliasing
=========================

Syntax:

     pragma Universal_Aliasing [([Entity =>] type_LOCAL_NAME)];

TYPE_LOCAL_NAME must refer to a type declaration in the current
declarative part.  The effect is to inhibit strict type-based aliasing
optimization for the given type.  In other words, the effect is as
though access types designating this type were subject to pragma
No_Strict_Aliasing.  For a detailed description of the strict aliasing
optimization, and the situations in which it must be suppressed, *Note
Optimization and Strict Aliasing: (gnat_ugn)Optimization and Strict
Aliasing.


File: gnat_rm.info,  Node: Pragma Universal_Data,  Next: Pragma Unmodified,  Prev: Pragma Universal_Aliasing,  Up: Implementation Defined Pragmas

Pragma Universal_Data
=====================

Syntax:

     pragma Universal_Data [(library_unit_Name)];

This pragma is supported only for the AAMP target and is ignored for
other targets. The pragma specifies that all library-level objects
(Counter 0 data) associated with the library unit are to be accessed
and updated using universal addressing (24-bit addresses for AAMP5)
rather than the default of 16-bit Data Environment (DENV) addressing.
Use of this pragma will generally result in less efficient code for
references to global data associated with the library unit, but allows
such data to be located anywhere in memory. This pragma is a library
unit pragma, but can also be used as a configuration pragma (including
use in the `gnat.adc' file). The functionality of this pragma is also
available by applying the -univ switch on the compilations of units
where universal addressing of the data is desired.


File: gnat_rm.info,  Node: Pragma Unmodified,  Next: Pragma Unreferenced,  Prev: Pragma Universal_Data,  Up: Implementation Defined Pragmas

Pragma Unmodified
=================

Syntax:

     pragma Unmodified (LOCAL_NAME {, LOCAL_NAME});

This pragma signals that the assignable entities (variables, `out'
parameters, `in out' parameters) whose names are listed are
deliberately not assigned in the current source unit. This suppresses
warnings about the entities being referenced but not assigned, and in
addition a warning will be generated if one of these entities is in
fact assigned in the same unit as the pragma (or in the corresponding
body, or one of its subunits).

   This is particularly useful for clearly signaling that a particular
parameter is not modified, even though the spec suggests that it might
be.


File: gnat_rm.info,  Node: Pragma Unreferenced,  Next: Pragma Unreferenced_Objects,  Prev: Pragma Unmodified,  Up: Implementation Defined Pragmas

Pragma Unreferenced
===================

Syntax:

     pragma Unreferenced (LOCAL_NAME {, LOCAL_NAME});
     pragma Unreferenced (library_unit_NAME {, library_unit_NAME});

This pragma signals that the entities whose names are listed are
deliberately not referenced in the current source unit. This suppresses
warnings about the entities being unreferenced, and in addition a
warning will be generated if one of these entities is in fact
subsequently referenced in the same unit as the pragma (or in the
corresponding body, or one of its subunits).

   This is particularly useful for clearly signaling that a particular
parameter is not referenced in some particular subprogram implementation
and that this is deliberate. It can also be useful in the case of
objects declared only for their initialization or finalization side
effects.

   If `LOCAL_NAME' identifies more than one matching homonym in the
current scope, then the entity most recently declared is the one to
which the pragma applies. Note that in the case of accept formals, the
pragma Unreferenced may appear immediately after the keyword `do' which
allows the indication of whether or not accept formals are referenced
or not to be given individually for each accept statement.

   The left hand side of an assignment does not count as a reference
for the purpose of this pragma. Thus it is fine to assign to an entity
for which pragma Unreferenced is given.

   Note that if a warning is desired for all calls to a given
subprogram, regardless of whether they occur in the same unit as the
subprogram declaration, then this pragma should not be used (calls from
another unit would not be flagged); pragma Obsolescent can be used
instead for this purpose, see *Note Pragma Obsolescent::.

   The second form of pragma `Unreferenced' is used within a context
clause. In this case the arguments must be unit names of units
previously mentioned in `with' clauses (similar to the usage of pragma
`Elaborate_All'. The effect is to suppress warnings about unreferenced
units and unreferenced entities within these units.


File: gnat_rm.info,  Node: Pragma Unreferenced_Objects,  Next: Pragma Unreserve_All_Interrupts,  Prev: Pragma Unreferenced,  Up: Implementation Defined Pragmas

Pragma Unreferenced_Objects
===========================

Syntax:

     pragma Unreferenced_Objects (local_subtype_NAME {, local_subtype_NAME});

This pragma signals that for the types or subtypes whose names are
listed, objects which are declared with one of these types or subtypes
may not be referenced, and if no references appear, no warnings are
given.

   This is particularly useful for objects which are declared solely
for their initialization and finalization effect. Such variables are
sometimes referred to as RAII variables (Resource Acquisition Is
Initialization). Using this pragma on the relevant type (most typically
a limited controlled type), the compiler will automatically suppress
unwanted warnings about these variables not being referenced.


File: gnat_rm.info,  Node: Pragma Unreserve_All_Interrupts,  Next: Pragma Unsuppress,  Prev: Pragma Unreferenced_Objects,  Up: Implementation Defined Pragmas

Pragma Unreserve_All_Interrupts
===============================

Syntax:

     pragma Unreserve_All_Interrupts;

Normally certain interrupts are reserved to the implementation.  Any
attempt to attach an interrupt causes Program_Error to be raised, as
described in RM C.3.2(22).  A typical example is the `SIGINT' interrupt
used in many systems for a `Ctrl-C' interrupt.  Normally this interrupt
is reserved to the implementation, so that `Ctrl-C' can be used to
interrupt execution.

   If the pragma `Unreserve_All_Interrupts' appears anywhere in any
unit in a program, then all such interrupts are unreserved.  This
allows the program to handle these interrupts, but disables their
standard functions.  For example, if this pragma is used, then pressing
`Ctrl-C' will not automatically interrupt execution.  However, a
program can then handle the `SIGINT' interrupt as it chooses.

   For a full list of the interrupts handled in a specific
implementation, see the source code for the spec of
`Ada.Interrupts.Names' in file `a-intnam.ads'.  This is a target
dependent file that contains the list of interrupts recognized for a
given target.  The documentation in this file also specifies what
interrupts are affected by the use of the `Unreserve_All_Interrupts'
pragma.

   For a more general facility for controlling what interrupts can be
handled, see pragma `Interrupt_State', which subsumes the functionality
of the `Unreserve_All_Interrupts' pragma.


File: gnat_rm.info,  Node: Pragma Unsuppress,  Next: Pragma Use_VADS_Size,  Prev: Pragma Unreserve_All_Interrupts,  Up: Implementation Defined Pragmas

Pragma Unsuppress
=================

Syntax:

     pragma Unsuppress (IDENTIFIER [, [On =>] NAME]);

This pragma undoes the effect of a previous pragma `Suppress'.  If
there is no corresponding pragma `Suppress' in effect, it has no
effect.  The range of the effect is the same as for pragma `Suppress'.
The meaning of the arguments is identical to that used in pragma
`Suppress'.

   One important application is to ensure that checks are on in cases
where code depends on the checks for its correct functioning, so that
the code will compile correctly even if the compiler switches are set
to suppress checks.


File: gnat_rm.info,  Node: Pragma Use_VADS_Size,  Next: Pragma Validity_Checks,  Prev: Pragma Unsuppress,  Up: Implementation Defined Pragmas

Pragma Use_VADS_Size
====================

Syntax:

     pragma Use_VADS_Size;

This is a configuration pragma.  In a unit to which it applies, any use
of the 'Size attribute is automatically interpreted as a use of the
'VADS_Size attribute.  Note that this may result in incorrect semantic
processing of valid Ada 95 or Ada 2005 programs.  This is intended to
aid in the handling of existing code which depends on the
interpretation of Size as implemented in the VADS compiler.  See
description of the VADS_Size attribute for further details.


File: gnat_rm.info,  Node: Pragma Validity_Checks,  Next: Pragma Volatile,  Prev: Pragma Use_VADS_Size,  Up: Implementation Defined Pragmas

Pragma Validity_Checks
======================

Syntax:

     pragma Validity_Checks (string_LITERAL | ALL_CHECKS | On | Off);

This pragma is used in conjunction with compiler switches to control the
built-in validity checking provided by GNAT.  The compiler switches, if
set provide an initial setting for the switches, and this pragma may be
used to modify these settings, or the settings may be provided entirely
by the use of the pragma.  This pragma can be used anywhere that a
pragma is legal, including use as a configuration pragma (including use
in the `gnat.adc' file).

   The form with a string literal specifies which validity options are
to be activated.  The validity checks are first set to include only the
default reference manual settings, and then a string of letters in the
string specifies the exact set of options required.  The form of this
string is exactly as described for the `-gnatVx' compiler switch (see
the GNAT users guide for details).  For example the following two
methods can be used to enable validity checking for mode `in' and `in
out' subprogram parameters:

   *      pragma Validity_Checks ("im");

   *      gcc -c -gnatVim ...

The form ALL_CHECKS activates all standard checks (its use is equivalent
to the use of the `gnatva' switch.

   The forms with `Off' and `On' can be used to temporarily disable
validity checks as shown in the following example:

     pragma Validity_Checks ("c"); -- validity checks for copies
     pragma Validity_Checks (Off); -- turn off validity checks
     A := B;                       -- B will not be validity checked
     pragma Validity_Checks (On);  -- turn validity checks back on
     A := C;                       -- C will be validity checked


File: gnat_rm.info,  Node: Pragma Volatile,  Next: Pragma Warnings,  Prev: Pragma Validity_Checks,  Up: Implementation Defined Pragmas

Pragma Volatile
===============

Syntax:

     pragma Volatile (LOCAL_NAME);

This pragma is defined by the Ada Reference Manual, and the GNAT
implementation is fully conformant with this definition.  The reason it
is mentioned in this section is that a pragma of the same name was
supplied in some Ada 83 compilers, including DEC Ada 83.  The Ada 95 /
Ada 2005 implementation of pragma Volatile is upwards compatible with
the implementation in DEC Ada 83.


File: gnat_rm.info,  Node: Pragma Warnings,  Next: Pragma Weak_External,  Prev: Pragma Volatile,  Up: Implementation Defined Pragmas

Pragma Warnings
===============

Syntax:

     pragma Warnings (On | Off);
     pragma Warnings (On | Off, LOCAL_NAME);
     pragma Warnings (static_string_EXPRESSION);
     pragma Warnings (On | Off, static_string_EXPRESSION);

Normally warnings are enabled, with the output being controlled by the
command line switch.  Warnings (`Off') turns off generation of warnings
until a Warnings (`On') is encountered or the end of the current unit.
If generation of warnings is turned off using this pragma, then no
warning messages are output, regardless of the setting of the command
line switches.

   The form with a single argument may be used as a configuration
pragma.

   If the LOCAL_NAME parameter is present, warnings are suppressed for
the specified entity.  This suppression is effective from the point
where it occurs till the end of the extended scope of the variable
(similar to the scope of `Suppress').

   The form with a single static_string_EXPRESSION argument provides
more precise control over which warnings are active. The string is a
list of letters specifying which warnings are to be activated and which
deactivated. The code for these letters is the same as the string used
in the command line switch controlling warnings. For a brief summary,
use the gnatmake command with no arguments, which will generate usage
information containing the list of warnings switches supported. For
full details see *Note Warning Message Control: (gnat_ugn)Warning
Message Control.

The specified warnings will be in effect until the end of the program
or another pragma Warnings is encountered. The effect of the pragma is
cumulative. Initially the set of warnings is the standard default set
as possibly modified by compiler switches. Then each pragma Warning
modifies this set of warnings as specified. This form of the pragma may
also be used as a configuration pragma.

   The fourth form, with an `On|Off' parameter and a string, is used to
control individual messages, based on their text. The string argument
is a pattern that is used to match against the text of individual
warning messages (not including the initial "warning: " tag).

   The pattern may contain asterisks, which match zero or more
characters in the message. For example, you can use `pragma Warnings
(Off, "*bits of*unused")' to suppress the warning message `warning: 960
bits of "a" unused'. No other regular expression notations are
permitted. All characters other than asterisk in these three specific
cases are treated as literal characters in the match.

   There are two ways to use the pragma in this form. The OFF form can
be used as a configuration pragma. The effect is to suppress all
warnings (if any) that match the pattern string throughout the
compilation.

   The second usage is to suppress a warning locally, and in this case,
two pragmas must appear in sequence:

     pragma Warnings (Off, Pattern);
     ... code where given warning is to be suppressed
     pragma Warnings (On, Pattern);

In this usage, the pattern string must match in the Off and On pragmas,
and at least one matching warning must be suppressed.

   Note: to write a string that will match any warning, use the string
`"***"'. It will not work to use a single asterisk or two asterisks
since this looks like an operator name. This form with three asterisks
is similar in effect to specifying `pragma Warnings (Off)' except that a
matching `pragma Warnings (On, "***")' will be required. This can be
helpful in avoiding forgetting to turn warnings back on.

   Note: the debug flag -gnatd.i (`/NOWARNINGS_PRAGMAS' in VMS) can be
used to cause the compiler to entirely ignore all WARNINGS pragmas.
This can be useful in checking whether obsolete pragmas in existing
programs are hiding real problems.

   Note: pragma Warnings does not affect the processing of style
messages. See separate entry for pragma Style_Checks for control of
style messages.


File: gnat_rm.info,  Node: Pragma Weak_External,  Next: Pragma Wide_Character_Encoding,  Prev: Pragma Warnings,  Up: Implementation Defined Pragmas

Pragma Weak_External
====================

Syntax:

     pragma Weak_External ([Entity =>] LOCAL_NAME);

LOCAL_NAME must refer to an object that is declared at the library
level. This pragma specifies that the given entity should be marked as a
weak symbol for the linker. It is equivalent to `__attribute__((weak))'
in GNU C and causes LOCAL_NAME to be emitted as a weak symbol instead
of a regular symbol, that is to say a symbol that does not have to be
resolved by the linker if used in conjunction with a pragma Import.

   When a weak symbol is not resolved by the linker, its address is set
to zero. This is useful in writing interfaces to external modules that
may or may not be linked in the final executable, for example depending
on configuration settings.

   If a program references at run time an entity to which this pragma
has been applied, and the corresponding symbol was not resolved at link
time, then the execution of the program is erroneous. It is not
erroneous to take the Address of such an entity, for example to guard
potential references, as shown in the example below.

   Some file formats do not support weak symbols so not all target
machines support this pragma.

     --  Example of the use of pragma Weak_External

     package External_Module is
       key : Integer;
       pragma Import (C, key);
       pragma Weak_External (key);
       function Present return boolean;
     end External_Module;

     with System; use System;
     package body External_Module is
       function Present return boolean is
       begin
         return key'Address /= System.Null_Address;
       end Present;
     end External_Module;


File: gnat_rm.info,  Node: Pragma Wide_Character_Encoding,  Prev: Pragma Weak_External,  Up: Implementation Defined Pragmas

Pragma Wide_Character_Encoding
==============================

Syntax:

     pragma Wide_Character_Encoding (IDENTIFIER | CHARACTER_LITERAL);

This pragma specifies the wide character encoding to be used in program
source text appearing subsequently. It is a configuration pragma, but
may also be used at any point that a pragma is allowed, and it is
permissible to have more than one such pragma in a file, allowing
multiple encodings to appear within the same file.

   The argument can be an identifier or a character literal. In the
identifier case, it is one of `HEX', `UPPER', `SHIFT_JIS', `EUC',
`UTF8', or `BRACKETS'. In the character literal case it is
correspondingly one of the characters `h', `u', `s', `e', `8', or `b'.

   Note that when the pragma is used within a file, it affects only the
encoding within that file, and does not affect withed units, specs, or
subunits.


File: gnat_rm.info,  Node: Implementation Defined Attributes,  Next: Implementation Defined Restrictions,  Prev: Implementation Defined Pragmas,  Up: Top

2 Implementation Defined Attributes
***********************************

Ada defines (throughout the Ada reference manual, summarized in Annex
K), a set of attributes that provide useful additional functionality in
all areas of the language.  These language defined attributes are
implemented in GNAT and work as described in the Ada Reference Manual.

   In addition, Ada allows implementations to define additional
attributes whose meaning is defined by the implementation.  GNAT
provides a number of these implementation-dependent attributes which
can be used to extend and enhance the functionality of the compiler.
This section of the GNAT reference manual describes these additional
attributes.

   Note that any program using these attributes may not be portable to
other compilers (although GNAT implements this set of attributes on all
platforms).  Therefore if portability to other compilers is an important
consideration, you should minimize the use of these attributes.

* Menu:

* Abort_Signal::
* Address_Size::
* Asm_Input::
* Asm_Output::
* AST_Entry::
* Bit::
* Bit_Position::
* Compiler_Version::
* Code_Address::
* Default_Bit_Order::
* Descriptor_Size::
* Elaborated::
* Elab_Body::
* Elab_Spec::
* Elab_Subp_Body::
* Emax::
* Enabled::
* Enum_Rep::
* Enum_Val::
* Epsilon::
* Fixed_Value::
* Has_Access_Values::
* Has_Discriminants::
* Img::
* Integer_Value::
* Invalid_Value::
* Large::
* Machine_Size::
* Mantissa::
* Max_Interrupt_Priority::
* Max_Priority::
* Maximum_Alignment::
* Mechanism_Code::
* Null_Parameter::
* Object_Size::
* Old::
* Passed_By_Reference::
* Pool_Address::
* Range_Length::
* Ref::
* Result::
* Safe_Emax::
* Safe_Large::
* Simple_Storage_Pool::
* Small::
* Storage_Unit::
* Stub_Type::
* System_Allocator_Alignment::
* Target_Name::
* Tick::
* To_Address::
* Type_Class::
* UET_Address::
* Unconstrained_Array::
* Universal_Literal_String::
* Unrestricted_Access::
* VADS_Size::
* Value_Size::
* Wchar_T_Size::
* Word_Size::


File: gnat_rm.info,  Node: Abort_Signal,  Next: Address_Size,  Up: Implementation Defined Attributes

Abort_Signal
============

`Standard'Abort_Signal' (`Standard' is the only allowed prefix)
provides the entity for the special exception used to signal task abort
or asynchronous transfer of control.  Normally this attribute should
only be used in the tasking runtime (it is highly peculiar, and
completely outside the normal semantics of Ada, for a user program to
intercept the abort exception).


File: gnat_rm.info,  Node: Address_Size,  Next: Asm_Input,  Prev: Abort_Signal,  Up: Implementation Defined Attributes

Address_Size
============

`Standard'Address_Size' (`Standard' is the only allowed prefix) is a
static constant giving the number of bits in an `Address'. It is the
same value as System.Address'Size, but has the advantage of being
static, while a direct reference to System.Address'Size is non-static
because Address is a private type.


File: gnat_rm.info,  Node: Asm_Input,  Next: Asm_Output,  Prev: Address_Size,  Up: Implementation Defined Attributes

Asm_Input
=========

The `Asm_Input' attribute denotes a function that takes two parameters.
The first is a string, the second is an expression of the type
designated by the prefix.  The first (string) argument is required to
be a static expression, and is the constraint for the parameter, (e.g.
what kind of register is required).  The second argument is the value
to be used as the input argument.  The possible values for the constant
are the same as those used in the RTL, and are dependent on the
configuration file used to built the GCC back end.  *Note Machine Code
Insertions::


File: gnat_rm.info,  Node: Asm_Output,  Next: AST_Entry,  Prev: Asm_Input,  Up: Implementation Defined Attributes

Asm_Output
==========

The `Asm_Output' attribute denotes a function that takes two
parameters.  The first is a string, the second is the name of a variable
of the type designated by the attribute prefix.  The first (string)
argument is required to be a static expression and designates the
constraint for the parameter (e.g. what kind of register is required).
The second argument is the variable to be updated with the result.  The
possible values for constraint are the same as those used in the RTL,
and are dependent on the configuration file used to build the GCC back
end.  If there are no output operands, then this argument may either be
omitted, or explicitly given as `No_Output_Operands'.  *Note Machine
Code Insertions::


File: gnat_rm.info,  Node: AST_Entry,  Next: Bit,  Prev: Asm_Output,  Up: Implementation Defined Attributes

AST_Entry
=========

This attribute is implemented only in OpenVMS versions of GNAT.
Applied to the name of an entry, it yields a value of the predefined
type AST_Handler (declared in the predefined package System, as
extended by the use of pragma `Extend_System (Aux_DEC)').  This value
enables the given entry to be called when an AST occurs.  For further
details, refer to the `DEC Ada Language Reference Manual', section
9.12a.


File: gnat_rm.info,  Node: Bit,  Next: Bit_Position,  Prev: AST_Entry,  Up: Implementation Defined Attributes

Bit
===

`OBJ'Bit', where OBJ is any object, yields the bit offset within the
storage unit (byte) that contains the first bit of storage allocated
for the object.  The value of this attribute is of the type
`Universal_Integer', and is always a non-negative number not exceeding
the value of `System.Storage_Unit'.

   For an object that is a variable or a constant allocated in a
register, the value is zero.  (The use of this attribute does not force
the allocation of a variable to memory).

   For an object that is a formal parameter, this attribute applies to
either the matching actual parameter or to a copy of the matching
actual parameter.

   For an access object the value is zero.  Note that `OBJ.all'Bit' is
subject to an `Access_Check' for the designated object.  Similarly for
a record component `X.C'Bit' is subject to a discriminant check and
`X(I).Bit' and `X(I1..I2)'Bit' are subject to index checks.

   This attribute is designed to be compatible with the DEC Ada 83
definition and implementation of the `Bit' attribute.


File: gnat_rm.info,  Node: Bit_Position,  Next: Compiler_Version,  Prev: Bit,  Up: Implementation Defined Attributes

Bit_Position
============

`R.C'Bit_Position', where R is a record object and C is one of the
fields of the record type, yields the bit offset within the record
contains the first bit of storage allocated for the object.  The value
of this attribute is of the type `Universal_Integer'.  The value
depends only on the field C and is independent of the alignment of the
containing record R.


File: gnat_rm.info,  Node: Compiler_Version,  Next: Code_Address,  Prev: Bit_Position,  Up: Implementation Defined Attributes

Compiler_Version
================

`Standard'Compiler_Version' (`Standard' is the only allowed prefix)
yields a static string identifying the version of the compiler being
used to compile the unit containing the attribute reference. A typical
result would be something like "GNAT version (20090221)".


File: gnat_rm.info,  Node: Code_Address,  Next: Default_Bit_Order,  Prev: Compiler_Version,  Up: Implementation Defined Attributes

Code_Address
============

The `'Address' attribute may be applied to subprograms in Ada 95 and
Ada 2005, but the intended effect seems to be to provide an address
value which can be used to call the subprogram by means of an address
clause as in the following example:

     procedure K is ...

     procedure L;
     for L'Address use K'Address;
     pragma Import (Ada, L);

A call to `L' is then expected to result in a call to `K'.  In Ada 83,
where there were no access-to-subprogram values, this was a common
work-around for getting the effect of an indirect call.  GNAT
implements the above use of `Address' and the technique illustrated by
the example code works correctly.

   However, for some purposes, it is useful to have the address of the
start of the generated code for the subprogram.  On some architectures,
this is not necessarily the same as the `Address' value described above.
For example, the `Address' value may reference a subprogram descriptor
rather than the subprogram itself.

   The `'Code_Address' attribute, which can only be applied to
subprogram entities, always returns the address of the start of the
generated code of the specified subprogram, which may or may not be the
same value as is returned by the corresponding `'Address' attribute.


File: gnat_rm.info,  Node: Default_Bit_Order,  Next: Descriptor_Size,  Prev: Code_Address,  Up: Implementation Defined Attributes

Default_Bit_Order
=================

`Standard'Default_Bit_Order' (`Standard' is the only permissible
prefix), provides the value `System.Default_Bit_Order' as a `Pos' value
(0 for `High_Order_First', 1 for `Low_Order_First').  This is used to
construct the definition of `Default_Bit_Order' in package `System'.


File: gnat_rm.info,  Node: Descriptor_Size,  Next: Elaborated,  Prev: Default_Bit_Order,  Up: Implementation Defined Attributes

Descriptor_Size
===============

Non-static attribute `Descriptor_Size' returns the size in bits of the
descriptor allocated for a type.  The result is non-zero only for
unconstrained array types and the returned value is of type universal
integer.  In GNAT, an array descriptor contains bounds information and
is located immediately before the first element of the array.

     type Unconstr_Array is array (Positive range <>) of Boolean;
     Put_Line ("Descriptor size = " & Unconstr_Array'Descriptor_Size'Img);

The attribute takes into account any additional padding due to type
alignment.  In the example above, the descriptor contains two values of
type `Positive' representing the low and high bound.  Since `Positive'
has a size of 31 bits and an alignment of 4, the descriptor size is `2 *
Positive'Size + 2' or 64 bits.


File: gnat_rm.info,  Node: Elaborated,  Next: Elab_Body,  Prev: Descriptor_Size,  Up: Implementation Defined Attributes

Elaborated
==========

The prefix of the `'Elaborated' attribute must be a unit name.  The
value is a Boolean which indicates whether or not the given unit has
been elaborated.  This attribute is primarily intended for internal use
by the generated code for dynamic elaboration checking, but it can also
be used in user programs.  The value will always be True once
elaboration of all units has been completed.  An exception is for units
which need no elaboration, the value is always False for such units.


File: gnat_rm.info,  Node: Elab_Body,  Next: Elab_Spec,  Prev: Elaborated,  Up: Implementation Defined Attributes

Elab_Body
=========

This attribute can only be applied to a program unit name.  It returns
the entity for the corresponding elaboration procedure for elaborating
the body of the referenced unit.  This is used in the main generated
elaboration procedure by the binder and is not normally used in any
other context.  However, there may be specialized situations in which it
is useful to be able to call this elaboration procedure from Ada code,
e.g. if it is necessary to do selective re-elaboration to fix some
error.


File: gnat_rm.info,  Node: Elab_Spec,  Next: Elab_Subp_Body,  Prev: Elab_Body,  Up: Implementation Defined Attributes

Elab_Spec
=========

This attribute can only be applied to a program unit name.  It returns
the entity for the corresponding elaboration procedure for elaborating
the spec of the referenced unit.  This is used in the main generated
elaboration procedure by the binder and is not normally used in any
other context.  However, there may be specialized situations in which
it is useful to be able to call this elaboration procedure from Ada
code, e.g. if it is necessary to do selective re-elaboration to fix
some error.


File: gnat_rm.info,  Node: Elab_Subp_Body,  Next: Emax,  Prev: Elab_Spec,  Up: Implementation Defined Attributes

Elab_Subp_Body
==============

This attribute can only be applied to a library level subprogram name
and is only allowed in CodePeer mode. It returns the entity for the
corresponding elaboration procedure for elaborating the body of the
referenced subprogram unit. This is used in the main generated
elaboration procedure by the binder in CodePeer mode only and is
unrecognized otherwise.


File: gnat_rm.info,  Node: Emax,  Next: Enabled,  Prev: Elab_Subp_Body,  Up: Implementation Defined Attributes

Emax
====

The `Emax' attribute is provided for compatibility with Ada 83.  See
the Ada 83 reference manual for an exact description of the semantics of
this attribute.


File: gnat_rm.info,  Node: Enabled,  Next: Enum_Rep,  Prev: Emax,  Up: Implementation Defined Attributes

Enabled
=======

The `Enabled' attribute allows an application program to check at
compile time to see if the designated check is currently enabled. The
prefix is a simple identifier, referencing any predefined check name
(other than `All_Checks') or a check name introduced by pragma
Check_Name. If no argument is given for the attribute, the check is for
the general state of the check, if an argument is given, then it is an
entity name, and the check indicates whether an `Suppress' or
`Unsuppress' has been given naming the entity (if not, then the
argument is ignored).

   Note that instantiations inherit the check status at the point of the
instantiation, so a useful idiom is to have a library package that
introduces a check name with `pragma Check_Name', and then contains
generic packages or subprograms which use the `Enabled' attribute to
see if the check is enabled. A user of this package can then issue a
`pragma Suppress' or `pragma Unsuppress' before instantiating the
package or subprogram, controlling whether the check will be present.


File: gnat_rm.info,  Node: Enum_Rep,  Next: Enum_Val,  Prev: Enabled,  Up: Implementation Defined Attributes

Enum_Rep
========

For every enumeration subtype S, `S'Enum_Rep' denotes a function with
the following spec:

     function S'Enum_Rep (Arg : S'Base)
       return Universal_Integer;

It is also allowable to apply `Enum_Rep' directly to an object of an
enumeration type or to a non-overloaded enumeration literal.  In this
case `S'Enum_Rep' is equivalent to `TYP'Enum_Rep(S)' where TYP is the
type of the enumeration literal or object.

   The function returns the representation value for the given
enumeration value.  This will be equal to value of the `Pos' attribute
in the absence of an enumeration representation clause.  This is a
static attribute (i.e. the result is static if the argument is static).

   `S'Enum_Rep' can also be used with integer types and objects, in
which case it simply returns the integer value.  The reason for this is
to allow it to be used for `(<>)' discrete formal arguments in a
generic unit that can be instantiated with either enumeration types or
integer types.  Note that if `Enum_Rep' is used on a modular type whose
upper bound exceeds the upper bound of the largest signed integer type,
and the argument is a variable, so that the universal integer
calculation is done at run time, then the call to `Enum_Rep' may raise
`Constraint_Error'.


File: gnat_rm.info,  Node: Enum_Val,  Next: Epsilon,  Prev: Enum_Rep,  Up: Implementation Defined Attributes

Enum_Val
========

For every enumeration subtype S, `S'Enum_Val' denotes a function with
the following spec:

     function S'Enum_Val (Arg : Universal_Integer)
       return S'Base;

The function returns the enumeration value whose representation matches
the argument, or raises Constraint_Error if no enumeration literal of
the type has the matching value.  This will be equal to value of the
`Val' attribute in the absence of an enumeration representation clause.
This is a static attribute (i.e. the result is static if the argument
is static).


File: gnat_rm.info,  Node: Epsilon,  Next: Fixed_Value,  Prev: Enum_Val,  Up: Implementation Defined Attributes

Epsilon
=======

The `Epsilon' attribute is provided for compatibility with Ada 83.  See
the Ada 83 reference manual for an exact description of the semantics of
this attribute.


File: gnat_rm.info,  Node: Fixed_Value,  Next: Has_Access_Values,  Prev: Epsilon,  Up: Implementation Defined Attributes

Fixed_Value
===========

For every fixed-point type S, `S'Fixed_Value' denotes a function with
the following specification:

     function S'Fixed_Value (Arg : Universal_Integer)
       return S;

The value returned is the fixed-point value V such that

     V = Arg * S'Small

The effect is thus similar to first converting the argument to the
integer type used to represent S, and then doing an unchecked
conversion to the fixed-point type.  The difference is that there are
full range checks, to ensure that the result is in range.  This
attribute is primarily intended for use in implementation of the
input-output functions for fixed-point values.


File: gnat_rm.info,  Node: Has_Access_Values,  Next: Has_Discriminants,  Prev: Fixed_Value,  Up: Implementation Defined Attributes

Has_Access_Values
=================

The prefix of the `Has_Access_Values' attribute is a type.  The result
is a Boolean value which is True if the is an access type, or is a
composite type with a component (at any nesting depth) that is an
access type, and is False otherwise.  The intended use of this
attribute is in conjunction with generic definitions.  If the attribute
is applied to a generic private type, it indicates whether or not the
corresponding actual type has access values.


File: gnat_rm.info,  Node: Has_Discriminants,  Next: Img,  Prev: Has_Access_Values,  Up: Implementation Defined Attributes

Has_Discriminants
=================

The prefix of the `Has_Discriminants' attribute is a type.  The result
is a Boolean value which is True if the type has discriminants, and
False otherwise.  The intended use of this attribute is in conjunction
with generic definitions.  If the attribute is applied to a generic
private type, it indicates whether or not the corresponding actual type
has discriminants.


File: gnat_rm.info,  Node: Img,  Next: Integer_Value,  Prev: Has_Discriminants,  Up: Implementation Defined Attributes

Img
===

The `Img' attribute differs from `Image' in that it may be applied to
objects as well as types, in which case it gives the `Image' for the
subtype of the object.  This is convenient for debugging:

     Put_Line ("X = " & X'Img);

has the same meaning as the more verbose:

     Put_Line ("X = " & T'Image (X));

where T is the (sub)type of the object `X'.


File: gnat_rm.info,  Node: Integer_Value,  Next: Invalid_Value,  Prev: Img,  Up: Implementation Defined Attributes

Integer_Value
=============

For every integer type S, `S'Integer_Value' denotes a function with the
following spec:

     function S'Integer_Value (Arg : Universal_Fixed)
       return S;

The value returned is the integer value V, such that

     Arg = V * T'Small

where T is the type of `Arg'.  The effect is thus similar to first
doing an unchecked conversion from the fixed-point type to its
corresponding implementation type, and then converting the result to
the target integer type.  The difference is that there are full range
checks, to ensure that the result is in range.  This attribute is
primarily intended for use in implementation of the standard
input-output functions for fixed-point values.


File: gnat_rm.info,  Node: Invalid_Value,  Next: Large,  Prev: Integer_Value,  Up: Implementation Defined Attributes

Invalid_Value
=============

For every scalar type S, S'Invalid_Value returns an undefined value of
the type. If possible this value is an invalid representation for the
type. The value returned is identical to the value used to initialize
an otherwise uninitialized value of the type if pragma
Initialize_Scalars is used, including the ability to modify the value
with the binder -Sxx flag and relevant environment variables at run
time.


File: gnat_rm.info,  Node: Large,  Next: Machine_Size,  Prev: Invalid_Value,  Up: Implementation Defined Attributes

Large
=====

The `Large' attribute is provided for compatibility with Ada 83.  See
the Ada 83 reference manual for an exact description of the semantics of
this attribute.


File: gnat_rm.info,  Node: Machine_Size,  Next: Mantissa,  Prev: Large,  Up: Implementation Defined Attributes

Machine_Size
============

This attribute is identical to the `Object_Size' attribute.  It is
provided for compatibility with the DEC Ada 83 attribute of this name.


File: gnat_rm.info,  Node: Mantissa,  Next: Max_Interrupt_Priority,  Prev: Machine_Size,  Up: Implementation Defined Attributes

Mantissa
========

The `Mantissa' attribute is provided for compatibility with Ada 83.  See
the Ada 83 reference manual for an exact description of the semantics of
this attribute.


File: gnat_rm.info,  Node: Max_Interrupt_Priority,  Next: Max_Priority,  Prev: Mantissa,  Up: Implementation Defined Attributes

Max_Interrupt_Priority
======================

`Standard'Max_Interrupt_Priority' (`Standard' is the only permissible
prefix), provides the same value as `System.Max_Interrupt_Priority'.


File: gnat_rm.info,  Node: Max_Priority,  Next: Maximum_Alignment,  Prev: Max_Interrupt_Priority,  Up: Implementation Defined Attributes

Max_Priority
============

`Standard'Max_Priority' (`Standard' is the only permissible prefix)
provides the same value as `System.Max_Priority'.


File: gnat_rm.info,  Node: Maximum_Alignment,  Next: Mechanism_Code,  Prev: Max_Priority,  Up: Implementation Defined Attributes

Maximum_Alignment
=================

`Standard'Maximum_Alignment' (`Standard' is the only permissible
prefix) provides the maximum useful alignment value for the target.
This is a static value that can be used to specify the alignment for an
object, guaranteeing that it is properly aligned in all cases.


File: gnat_rm.info,  Node: Mechanism_Code,  Next: Null_Parameter,  Prev: Maximum_Alignment,  Up: Implementation Defined Attributes

Mechanism_Code
==============

`FUNCTION'Mechanism_Code' yields an integer code for the mechanism used
for the result of function, and `SUBPROGRAM'Mechanism_Code (N)' yields
the mechanism used for formal parameter number N (a static integer
value with 1 meaning the first parameter) of SUBPROGRAM.  The code
returned is:

1
     by copy (value)

2
     by reference

3
     by descriptor (default descriptor class)

4
     by descriptor (UBS: unaligned bit string)

5
     by descriptor (UBSB: aligned bit string with arbitrary bounds)

6
     by descriptor (UBA: unaligned bit array)

7
     by descriptor (S: string, also scalar access type parameter)

8
     by descriptor (SB: string with arbitrary bounds)

9
     by descriptor (A: contiguous array)

10
     by descriptor (NCA: non-contiguous array)

Values from 3 through 10 are only relevant to Digital OpenVMS
implementations.  


File: gnat_rm.info,  Node: Null_Parameter,  Next: Object_Size,  Prev: Mechanism_Code,  Up: Implementation Defined Attributes

Null_Parameter
==============

A reference `T'Null_Parameter' denotes an imaginary object of type or
subtype T allocated at machine address zero.  The attribute is allowed
only as the default expression of a formal parameter, or as an actual
expression of a subprogram call.  In either case, the subprogram must
be imported.

   The identity of the object is represented by the address zero in the
argument list, independent of the passing mechanism (explicit or
default).

   This capability is needed to specify that a zero address should be
passed for a record or other composite object passed by reference.
There is no way of indicating this without the `Null_Parameter'
attribute.


File: gnat_rm.info,  Node: Object_Size,  Next: Old,  Prev: Null_Parameter,  Up: Implementation Defined Attributes

Object_Size
===========

The size of an object is not necessarily the same as the size of the
type of an object.  This is because by default object sizes are
increased to be a multiple of the alignment of the object.  For example,
`Natural'Size' is 31, but by default objects of type `Natural' will
have a size of 32 bits.  Similarly, a record containing an integer and
a character:

     type Rec is record
        I : Integer;
        C : Character;
     end record;

will have a size of 40 (that is `Rec'Size' will be 40).  The alignment
will be 4, because of the integer field, and so the default size of
record objects for this type will be 64 (8 bytes).


File: gnat_rm.info,  Node: Old,  Next: Passed_By_Reference,  Prev: Object_Size,  Up: Implementation Defined Attributes

Old
===

The attribute Prefix'Old can be used within a subprogram body or within
a precondition or postcondition pragma. The effect is to refer to the
value of the prefix on entry. So for example if you have an argument of
a record type X called Arg1, you can refer to Arg1.Field'Old which
yields the value of Arg1.Field on entry. The implementation simply
involves generating an object declaration which captures the value on
entry.  The prefix must denote an object of a nonlimited type (since
limited types cannot be copied to capture their values) and it must not
reference a local variable (since local variables do not exist at
subprogram entry time). Note that the variable introduced by a
quantified expression is a local variable.  The following example shows
the use of 'Old to implement a test of a postcondition:

     with Old_Pkg;
     procedure Old is
     begin
        Old_Pkg.Incr;
     end Old;

     package Old_Pkg is
        procedure Incr;
     end Old_Pkg;

     package body Old_Pkg is
        Count : Natural := 0;

        procedure Incr is
        begin
           ... code manipulating the value of Count

           pragma Assert (Count = Count'Old + 1);
        end Incr;
     end Old_Pkg;

Note that it is allowed to apply 'Old to a constant entity, but this
will result in a warning, since the old and new values will always be
the same.


File: gnat_rm.info,  Node: Passed_By_Reference,  Next: Pool_Address,  Prev: Old,  Up: Implementation Defined Attributes

Passed_By_Reference
===================

`TYPE'Passed_By_Reference' for any subtype TYPE returns a value of type
`Boolean' value that is `True' if the type is normally passed by
reference and `False' if the type is normally passed by copy in calls.
For scalar types, the result is always `False' and is static.  For
non-scalar types, the result is non-static.


File: gnat_rm.info,  Node: Pool_Address,  Next: Range_Length,  Prev: Passed_By_Reference,  Up: Implementation Defined Attributes

Pool_Address
============

`X'Pool_Address' for any object X returns the address of X within its
storage pool. This is the same as `X'Address', except that for an
unconstrained array whose bounds are allocated just before the first
component, `X'Pool_Address' returns the address of those bounds,
whereas `X'Address' returns the address of the first component.

   Here, we are interpreting "storage pool" broadly to mean "wherever
the object is allocated", which could be a user-defined storage pool,
the global heap, on the stack, or in a static memory area. For an
object created by `new', `PTR.ALL'Pool_Address' is what is passed to
`Allocate' and returned from `Deallocate'.


File: gnat_rm.info,  Node: Range_Length,  Next: Ref,  Prev: Pool_Address,  Up: Implementation Defined Attributes

Range_Length
============

`TYPE'Range_Length' for any discrete type TYPE yields the number of
values represented by the subtype (zero for a null range).  The result
is static for static subtypes.  `Range_Length' applied to the index
subtype of a one dimensional array always gives the same result as
`Range' applied to the array itself.


File: gnat_rm.info,  Node: Ref,  Next: Result,  Prev: Range_Length,  Up: Implementation Defined Attributes

Ref
===

The `System.Address'Ref' (`System.Address' is the only permissible
prefix) denotes a function identical to
`System.Storage_Elements.To_Address' except that it is a static
attribute.  See *Note To_Address:: for more details.


File: gnat_rm.info,  Node: Result,  Next: Safe_Emax,  Prev: Ref,  Up: Implementation Defined Attributes

Result
======

`FUNCTION'Result' can only be used with in a Postcondition pragma for a
function. The prefix must be the name of the corresponding function.
This is used to refer to the result of the function in the
postcondition expression.  For a further discussion of the use of this
attribute and examples of its use, see the description of pragma
Postcondition.


File: gnat_rm.info,  Node: Safe_Emax,  Next: Safe_Large,  Prev: Result,  Up: Implementation Defined Attributes

Safe_Emax
=========

The `Safe_Emax' attribute is provided for compatibility with Ada 83.
See the Ada 83 reference manual for an exact description of the
semantics of this attribute.


File: gnat_rm.info,  Node: Safe_Large,  Next: Simple_Storage_Pool,  Prev: Safe_Emax,  Up: Implementation Defined Attributes

Safe_Large
==========

The `Safe_Large' attribute is provided for compatibility with Ada 83.
See the Ada 83 reference manual for an exact description of the
semantics of this attribute.


File: gnat_rm.info,  Node: Simple_Storage_Pool,  Next: Small,  Prev: Safe_Large,  Up: Implementation Defined Attributes

Simple_Storage_Pool
===================

For every nonformal, nonderived access-to-object type ACC, the
representation attribute `Simple_Storage_Pool' may be specified via an
attribute_definition_clause (or by specifying the equivalent aspect):


     My_Pool : My_Simple_Storage_Pool_Type;

     type Acc is access My_Data_Type;

     for Acc'Simple_Storage_Pool use My_Pool;

The name given in an attribute_definition_clause for the
`Simple_Storage_Pool' attribute shall denote a variable of a "simple
storage pool type" (see pragma `Simple_Storage_Pool_Type').

   The use of this attribute is only allowed for a prefix denoting a
type for which it has been specified. The type of the attribute is the
type of the variable specified as the simple storage pool of the access
type, and the attribute denotes that variable.

   It is illegal to specify both `Storage_Pool' and
`Simple_Storage_Pool' for the same access type.

   If the `Simple_Storage_Pool' attribute has been specified for an
access type, then applying the `Storage_Pool' attribute to the type is
flagged with a warning and its evaluation raises the exception
`Program_Error'.

   If the Simple_Storage_Pool attribute has been specified for an access
type S, then the evaluation of the attribute `S'Storage_Size' returns
the result of calling `Storage_Size (S'Simple_Storage_Pool)', which is
intended to indicate the number of storage elements reserved for the
simple storage pool. If the Storage_Size function has not been defined
for the simple storage pool type, then this attribute returns zero.

   If an access type S has a specified simple storage pool of type SSP,
then the evaluation of an allocator for that access type calls the
primitive `Allocate' procedure for type SSP, passing
`S'Simple_Storage_Pool' as the pool parameter. The detailed semantics
of such allocators is the same as those defined for allocators in
section 13.11 of the Ada Reference Manual, with the term "simple
storage pool" substituted for "storage pool".

   If an access type S has a specified simple storage pool of type SSP,
then a call to an instance of the `Ada.Unchecked_Deallocation' for that
access type invokes the primitive `Deallocate' procedure for type SSP,
passing `S'Simple_Storage_Pool' as the pool parameter. The detailed
semantics of such unchecked deallocations is the same as defined in
section 13.11.2 of the Ada Reference Manual, except that the term
"simple storage pool" is substituted for "storage pool".


File: gnat_rm.info,  Node: Small,  Next: Storage_Unit,  Prev: Simple_Storage_Pool,  Up: Implementation Defined Attributes

Small
=====

The `Small' attribute is defined in Ada 95 (and Ada 2005) only for
fixed-point types.  GNAT also allows this attribute to be applied to
floating-point types for compatibility with Ada 83.  See the Ada 83
reference manual for an exact description of the semantics of this
attribute when applied to floating-point types.


File: gnat_rm.info,  Node: Storage_Unit,  Next: Stub_Type,  Prev: Small,  Up: Implementation Defined Attributes

Storage_Unit
============

`Standard'Storage_Unit' (`Standard' is the only permissible prefix)
provides the same value as `System.Storage_Unit'.


File: gnat_rm.info,  Node: Stub_Type,  Next: System_Allocator_Alignment,  Prev: Storage_Unit,  Up: Implementation Defined Attributes

Stub_Type
=========

The GNAT implementation of remote access-to-classwide types is
organized as described in AARM section E.4 (20.t): a value of an RACW
type (designating a remote object) is represented as a normal access
value, pointing to a "stub" object which in turn contains the necessary
information to contact the designated remote object. A call on any
dispatching operation of such a stub object does the remote call, if
necessary, using the information in the stub object to locate the
target partition, etc.

   For a prefix `T' that denotes a remote access-to-classwide type,
`T'Stub_Type' denotes the type of the corresponding stub objects.

   By construction, the layout of `T'Stub_Type' is identical to that of
type `RACW_Stub_Type' declared in the internal implementation-defined
unit `System.Partition_Interface'. Use of this attribute will create an
implicit dependency on this unit.


File: gnat_rm.info,  Node: System_Allocator_Alignment,  Next: Target_Name,  Prev: Stub_Type,  Up: Implementation Defined Attributes

System_Allocator_Alignment
==========================

`Standard'System_Allocator_Alignment' (`Standard' is the only
permissible prefix) provides the observable guaranted to be honored by
the system allocator (malloc). This is a static value that can be used
in user storage pools based on malloc either to reject allocation with
alignment too large or to enable a realignment circuitry if the
alignment request is larger than this value.


File: gnat_rm.info,  Node: Target_Name,  Next: Tick,  Prev: System_Allocator_Alignment,  Up: Implementation Defined Attributes

Target_Name
===========

`Standard'Target_Name' (`Standard' is the only permissible prefix)
provides a static string value that identifies the target for the
current compilation. For GCC implementations, this is the standard gcc
target name without the terminating slash (for example, GNAT 5.0 on
windows yields "i586-pc-mingw32msv").


File: gnat_rm.info,  Node: Tick,  Next: To_Address,  Prev: Target_Name,  Up: Implementation Defined Attributes

Tick
====

`Standard'Tick' (`Standard' is the only permissible prefix) provides
the same value as `System.Tick',


File: gnat_rm.info,  Node: To_Address,  Next: Type_Class,  Prev: Tick,  Up: Implementation Defined Attributes

To_Address
==========

The `System'To_Address' (`System' is the only permissible prefix)
denotes a function identical to `System.Storage_Elements.To_Address'
except that it is a static attribute.  This means that if its argument
is a static expression, then the result of the attribute is a static
expression.  The result is that such an expression can be used in
contexts (e.g. preelaborable packages) which require a static
expression and where the function call could not be used (since the
function call is always non-static, even if its argument is static).


File: gnat_rm.info,  Node: Type_Class,  Next: UET_Address,  Prev: To_Address,  Up: Implementation Defined Attributes

Type_Class
==========

`TYPE'Type_Class' for any type or subtype TYPE yields the value of the
type class for the full type of TYPE.  If TYPE is a generic formal
type, the value is the value for the corresponding actual subtype.  The
value of this attribute is of type `System.Aux_DEC.Type_Class', which
has the following definition:

       type Type_Class is
         (Type_Class_Enumeration,
          Type_Class_Integer,
          Type_Class_Fixed_Point,
          Type_Class_Floating_Point,
          Type_Class_Array,
          Type_Class_Record,
          Type_Class_Access,
          Type_Class_Task,
          Type_Class_Address);

Protected types yield the value `Type_Class_Task', which thus applies
to all concurrent types.  This attribute is designed to be compatible
with the DEC Ada 83 attribute of the same name.


File: gnat_rm.info,  Node: UET_Address,  Next: Unconstrained_Array,  Prev: Type_Class,  Up: Implementation Defined Attributes

UET_Address
===========

The `UET_Address' attribute can only be used for a prefix which denotes
a library package.  It yields the address of the unit exception table
when zero cost exception handling is used.  This attribute is intended
only for use within the GNAT implementation.  See the unit
`Ada.Exceptions' in files `a-except.ads' and `a-except.adb' for details
on how this attribute is used in the implementation.


File: gnat_rm.info,  Node: Unconstrained_Array,  Next: Universal_Literal_String,  Prev: UET_Address,  Up: Implementation Defined Attributes

Unconstrained_Array
===================

The `Unconstrained_Array' attribute can be used with a prefix that
denotes any type or subtype. It is a static attribute that yields
`True' if the prefix designates an unconstrained array, and `False'
otherwise. In a generic instance, the result is still static, and
yields the result of applying this test to the generic actual.


File: gnat_rm.info,  Node: Universal_Literal_String,  Next: Unrestricted_Access,  Prev: Unconstrained_Array,  Up: Implementation Defined Attributes

Universal_Literal_String
========================

The prefix of `Universal_Literal_String' must be a named number.  The
static result is the string consisting of the characters of the number
as defined in the original source.  This allows the user program to
access the actual text of named numbers without intermediate
conversions and without the need to enclose the strings in quotes (which
would preclude their use as numbers).

   For example, the following program prints the first 50 digits of pi:

     with Text_IO; use Text_IO;
     with Ada.Numerics;
     procedure Pi is
     begin
        Put (Ada.Numerics.Pi'Universal_Literal_String);
     end;


File: gnat_rm.info,  Node: Unrestricted_Access,  Next: VADS_Size,  Prev: Universal_Literal_String,  Up: Implementation Defined Attributes

Unrestricted_Access
===================

The `Unrestricted_Access' attribute is similar to `Access' except that
all accessibility and aliased view checks are omitted.  This is a
user-beware attribute.  It is similar to `Address', for which it is a
desirable replacement where the value desired is an access type.  In
other words, its effect is identical to first applying the `Address'
attribute and then doing an unchecked conversion to a desired access
type.  In GNAT, but not necessarily in other implementations, the use
of static chains for inner level subprograms means that
`Unrestricted_Access' applied to a subprogram yields a value that can
be called as long as the subprogram is in scope (normal Ada
accessibility rules restrict this usage).

   It is possible to use `Unrestricted_Access' for any type, but care
must be exercised if it is used to create pointers to unconstrained
objects. In this case, the resulting pointer has the same scope as the
context of the attribute, and may not be returned to some enclosing
scope. For instance, a function cannot use `Unrestricted_Access' to
create a unconstrained pointer and then return that value to the caller.


File: gnat_rm.info,  Node: VADS_Size,  Next: Value_Size,  Prev: Unrestricted_Access,  Up: Implementation Defined Attributes

VADS_Size
=========

The `'VADS_Size' attribute is intended to make it easier to port legacy
code which relies on the semantics of `'Size' as implemented by the
VADS Ada 83 compiler.  GNAT makes a best effort at duplicating the same
semantic interpretation.  In particular, `'VADS_Size' applied to a
predefined or other primitive type with no Size clause yields the
Object_Size (for example, `Natural'Size' is 32 rather than 31 on
typical machines).  In addition `'VADS_Size' applied to an object gives
the result that would be obtained by applying the attribute to the
corresponding type.


File: gnat_rm.info,  Node: Value_Size,  Next: Wchar_T_Size,  Prev: VADS_Size,  Up: Implementation Defined Attributes

Value_Size
==========

`TYPE'Value_Size' is the number of bits required to represent a value
of the given subtype.  It is the same as `TYPE'Size', but, unlike
`Size', may be set for non-first subtypes.


File: gnat_rm.info,  Node: Wchar_T_Size,  Next: Word_Size,  Prev: Value_Size,  Up: Implementation Defined Attributes

Wchar_T_Size
============

`Standard'Wchar_T_Size' (`Standard' is the only permissible prefix)
provides the size in bits of the C `wchar_t' type primarily for
constructing the definition of this type in package `Interfaces.C'.


File: gnat_rm.info,  Node: Word_Size,  Prev: Wchar_T_Size,  Up: Implementation Defined Attributes

Word_Size
=========

`Standard'Word_Size' (`Standard' is the only permissible prefix)
provides the value `System.Word_Size'.


File: gnat_rm.info,  Node: Implementation Defined Restrictions,  Next: Implementation Advice,  Prev: Implementation Defined Attributes,  Up: Top

3 Implementation Defined Restrictions
*************************************

All RM defined Restriction identifiers are implemented:

   * language-defined restrictions (see 13.12.1)

   * tasking restrictions (see D.7)

   * high integrity restrictions (see H.4)

GNAT implements additional restriction identifiers. All restrictions,
whether language defined or GNAT-specific, are listed in the following.

* Menu:

* Partition-Wide Restrictions::
* Program Unit Level Restrictions::


File: gnat_rm.info,  Node: Partition-Wide Restrictions,  Next: Program Unit Level Restrictions,  Up: Implementation Defined Restrictions

3.1 Partition-Wide Restrictions
===============================

There are two separate lists of restriction identifiers. The first set
requires consistency throughout a partition (in other words, if the
restriction identifier is used for any compilation unit in the
partition, then all compilation units in the partition must obey the
restriction).

* Menu:

* Immediate_Reclamation::
* Max_Asynchronous_Select_Nesting::
* Max_Entry_Queue_Length::
* Max_Protected_Entries::
* Max_Select_Alternatives::
* Max_Storage_At_Blocking::
* Max_Task_Entries::
* Max_Tasks::
* No_Abort_Statements::
* No_Access_Parameter_Allocators::
* No_Access_Subprograms::
* No_Allocators::
* No_Anonymous_Allocators::
* No_Calendar::
* No_Coextensions::
* No_Default_Initialization::
* No_Delay::
* No_Dependence::
* No_Direct_Boolean_Operators::
* No_Dispatch::
* No_Dispatching_Calls::
* No_Dynamic_Attachment::
* No_Dynamic_Priorities::
* No_Entry_Calls_In_Elaboration_Code::
* No_Enumeration_Maps::
* No_Exception_Handlers::
* No_Exception_Propagation::
* No_Exception_Registration::
* No_Exceptions::
* No_Finalization::
* No_Fixed_Point::
* No_Floating_Point::
* No_Implicit_Conditionals::
* No_Implicit_Dynamic_Code::
* No_Implicit_Heap_Allocations::
* No_Implicit_Loops::
* No_Initialize_Scalars::
* No_IO::
* No_Local_Allocators::
* No_Local_Protected_Objects::
* No_Local_Timing_Events::
* No_Nested_Finalization::
* No_Protected_Type_Allocators::
* No_Protected_Types::
* No_Recursion::
* No_Reentrancy::
* No_Relative_Delay::
* No_Requeue_Statements::
* No_Secondary_Stack::
* No_Select_Statements::
* No_Specific_Termination_Handlers::
* No_Specification_of_Aspect::
* No_Standard_Allocators_After_Elaboration::
* No_Standard_Storage_Pools::
* No_Stream_Optimizations::
* No_Streams::
* No_Task_Allocators::
* No_Task_Attributes_Package::
* No_Task_Hierarchy::
* No_Task_Termination::
* No_Tasking::
* No_Terminate_Alternatives::
* No_Unchecked_Access::
* Simple_Barriers::
* Static_Priorities::
* Static_Storage_Size::


File: gnat_rm.info,  Node: Immediate_Reclamation,  Next: Max_Asynchronous_Select_Nesting,  Up: Partition-Wide Restrictions

Immediate_Reclamation
---------------------

[RM H.4] This restriction ensures that, except for storage occupied by
objects created by allocators and not deallocated via unchecked
deallocation, any storage reserved at run time for an object is
immediately reclaimed when the object no longer exists.


File: gnat_rm.info,  Node: Max_Asynchronous_Select_Nesting,  Next: Max_Entry_Queue_Length,  Prev: Immediate_Reclamation,  Up: Partition-Wide Restrictions

Max_Asynchronous_Select_Nesting
-------------------------------

[RM D.7] Specifies the maximum dynamic nesting level of asynchronous
selects. Violations of this restriction with a value of zero are
detected at compile time. Violations of this restriction with values
other than zero cause Storage_Error to be raised.


File: gnat_rm.info,  Node: Max_Entry_Queue_Length,  Next: Max_Protected_Entries,  Prev: Max_Asynchronous_Select_Nesting,  Up: Partition-Wide Restrictions

Max_Entry_Queue_Length
----------------------

[RM D.7] This restriction is a declaration that any protected entry
compiled in the scope of the restriction has at most the specified
number of tasks waiting on the entry at any one time, and so no queue
is required.  Note that this restriction is checked at run time.
Violation of this restriction results in the raising of Program_Error
exception at the point of the call.


File: gnat_rm.info,  Node: Max_Protected_Entries,  Next: Max_Select_Alternatives,  Prev: Max_Entry_Queue_Length,  Up: Partition-Wide Restrictions

Max_Protected_Entries
---------------------

[RM D.7] Specifies the maximum number of entries per protected type. The
bounds of every entry family of a protected unit shall be static, or
shall be defined by a discriminant of a subtype whose corresponding
bound is static.


File: gnat_rm.info,  Node: Max_Select_Alternatives,  Next: Max_Storage_At_Blocking,  Prev: Max_Protected_Entries,  Up: Partition-Wide Restrictions

Max_Select_Alternatives
-----------------------

[RM D.7] Specifies the maximum number of alternatives in a selective
accept.


File: gnat_rm.info,  Node: Max_Storage_At_Blocking,  Next: Max_Task_Entries,  Prev: Max_Select_Alternatives,  Up: Partition-Wide Restrictions

Max_Storage_At_Blocking
-----------------------

[RM D.7] Specifies the maximum portion (in storage elements) of a task's
Storage_Size that can be retained by a blocked task. A violation of this
restriction causes Storage_Error to be raised.


File: gnat_rm.info,  Node: Max_Task_Entries,  Next: Max_Tasks,  Prev: Max_Storage_At_Blocking,  Up: Partition-Wide Restrictions

Max_Task_Entries
----------------

[RM D.7] Specifies the maximum number of entries per task.  The bounds
of every entry family of a task unit shall be static, or shall be
defined by a discriminant of a subtype whose corresponding bound is
static.


File: gnat_rm.info,  Node: Max_Tasks,  Next: No_Abort_Statements,  Prev: Max_Task_Entries,  Up: Partition-Wide Restrictions

Max_Tasks
---------

[RM D.7] Specifies the maximum number of task that may be created, not
counting the creation of the environment task.  Violations of this
restriction with a value of zero are detected at compile time.
Violations of this restriction with values other than zero cause
Storage_Error to be raised.


File: gnat_rm.info,  Node: No_Abort_Statements,  Next: No_Access_Parameter_Allocators,  Prev: Max_Tasks,  Up: Partition-Wide Restrictions

No_Abort_Statements
-------------------

[RM D.7] There are no abort_statements, and there are no calls to
Task_Identification.Abort_Task.


File: gnat_rm.info,  Node: No_Access_Parameter_Allocators,  Next: No_Access_Subprograms,  Prev: No_Abort_Statements,  Up: Partition-Wide Restrictions

No_Access_Parameter_Allocators
------------------------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of an allocator as the actual parameter to an access
parameter.


File: gnat_rm.info,  Node: No_Access_Subprograms,  Next: No_Allocators,  Prev: No_Access_Parameter_Allocators,  Up: Partition-Wide Restrictions

No_Access_Subprograms
---------------------

[RM H.4] This restriction ensures at compile time that there are no
declarations of access-to-subprogram types.


File: gnat_rm.info,  Node: No_Allocators,  Next: No_Anonymous_Allocators,  Prev: No_Access_Subprograms,  Up: Partition-Wide Restrictions

No_Allocators
-------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of an allocator.


File: gnat_rm.info,  Node: No_Anonymous_Allocators,  Next: No_Calendar,  Prev: No_Allocators,  Up: Partition-Wide Restrictions

No_Anonymous_Allocators
-----------------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of an allocator of anonymous access type.


File: gnat_rm.info,  Node: No_Calendar,  Next: No_Coextensions,  Prev: No_Anonymous_Allocators,  Up: Partition-Wide Restrictions

No_Calendar
-----------

[GNAT] This restriction ensures at compile time that there is no
implicit or explicit dependence on the package `Ada.Calendar'.


File: gnat_rm.info,  Node: No_Coextensions,  Next: No_Default_Initialization,  Prev: No_Calendar,  Up: Partition-Wide Restrictions

No_Coextensions
---------------

[RM H.4] This restriction ensures at compile time that there are no
coextensions. See 3.10.2.


File: gnat_rm.info,  Node: No_Default_Initialization,  Next: No_Delay,  Prev: No_Coextensions,  Up: Partition-Wide Restrictions

No_Default_Initialization
-------------------------

[GNAT] This restriction prohibits any instance of default initialization
of variables.  The binder implements a consistency rule which prevents
any unit compiled without the restriction from with'ing a unit with the
restriction (this allows the generation of initialization procedures to
be skipped, since you can be sure that no call is ever generated to an
initialization procedure in a unit with the restriction active). If used
in conjunction with Initialize_Scalars or Normalize_Scalars, the effect
is to prohibit all cases of variables declared without a specific
initializer (including the case of OUT scalar parameters).


File: gnat_rm.info,  Node: No_Delay,  Next: No_Dependence,  Prev: No_Default_Initialization,  Up: Partition-Wide Restrictions

No_Delay
--------

[RM H.4] This restriction ensures at compile time that there are no
delay statements and no dependences on package Calendar.


File: gnat_rm.info,  Node: No_Dependence,  Next: No_Direct_Boolean_Operators,  Prev: No_Delay,  Up: Partition-Wide Restrictions

No_Dependence
-------------

[RM 13.12.1] This restriction checks at compile time that there are no
dependence on a library unit.


File: gnat_rm.info,  Node: No_Direct_Boolean_Operators,  Next: No_Dispatch,  Prev: No_Dependence,  Up: Partition-Wide Restrictions

No_Direct_Boolean_Operators
---------------------------

[GNAT] This restriction ensures that no logical (and/or/xor) are used on
operands of type Boolean (or any type derived from Boolean). This is
intended for use in safety critical programs where the certification
protocol requires the use of short-circuit (and then, or else) forms
for all composite boolean operations.


File: gnat_rm.info,  Node: No_Dispatch,  Next: No_Dispatching_Calls,  Prev: No_Direct_Boolean_Operators,  Up: Partition-Wide Restrictions

No_Dispatch
-----------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of `T'Class', for any (tagged) subtype `T'.


File: gnat_rm.info,  Node: No_Dispatching_Calls,  Next: No_Dynamic_Attachment,  Prev: No_Dispatch,  Up: Partition-Wide Restrictions

No_Dispatching_Calls
--------------------

[GNAT] This restriction ensures at compile time that the code generated
by the compiler involves no dispatching calls. The use of this
restriction allows the safe use of record extensions, classwide
membership tests and other classwide features not involving implicit
dispatching. This restriction ensures that the code contains no
indirect calls through a dispatching mechanism. Note that this includes
internally-generated calls created by the compiler, for example in the
implementation of class-wide objects assignments. The membership test
is allowed in the presence of this restriction, because its
implementation requires no dispatching.  This restriction is comparable
to the official Ada restriction `No_Dispatch' except that it is a bit
less restrictive in that it allows all classwide constructs that do not
imply dispatching.  The following example indicates constructs that
violate this restriction.

     package Pkg is
       type T is tagged record
         Data : Natural;
       end record;
       procedure P (X : T);

       type DT is new T with record
         More_Data : Natural;
       end record;
       procedure Q (X : DT);
     end Pkg;

     with Pkg; use Pkg;
     procedure Example is
       procedure Test (O : T'Class) is
         N : Natural  := O'Size;--  Error: Dispatching call
         C : T'Class := O;      --  Error: implicit Dispatching Call
       begin
         if O in DT'Class then  --  OK   : Membership test
            Q (DT (O));         --  OK   : Type conversion plus direct call
         else
            P (O);              --  Error: Dispatching call
         end if;
       end Test;

       Obj : DT;
     begin
       P (Obj);                 --  OK   : Direct call
       P (T (Obj));             --  OK   : Type conversion plus direct call
       P (T'Class (Obj));       --  Error: Dispatching call

       Test (Obj);              --  OK   : Type conversion

       if Obj in T'Class then   --  OK   : Membership test
          null;
       end if;
     end Example;


File: gnat_rm.info,  Node: No_Dynamic_Attachment,  Next: No_Dynamic_Priorities,  Prev: No_Dispatching_Calls,  Up: Partition-Wide Restrictions

No_Dynamic_Attachment
---------------------

[RM D.7] This restriction ensures that there is no call to any of the
operations defined in package Ada.Interrupts (Is_Reserved, Is_Attached,
Current_Handler, Attach_Handler, Exchange_Handler, Detach_Handler, and
Reference).


File: gnat_rm.info,  Node: No_Dynamic_Priorities,  Next: No_Entry_Calls_In_Elaboration_Code,  Prev: No_Dynamic_Attachment,  Up: Partition-Wide Restrictions

No_Dynamic_Priorities
---------------------

[RM D.7] There are no semantic dependencies on the package
Dynamic_Priorities.


File: gnat_rm.info,  Node: No_Entry_Calls_In_Elaboration_Code,  Next: No_Enumeration_Maps,  Prev: No_Dynamic_Priorities,  Up: Partition-Wide Restrictions

No_Entry_Calls_In_Elaboration_Code
----------------------------------

[GNAT] This restriction ensures at compile time that no task or
protected entry calls are made during elaboration code.  As a result of
the use of this restriction, the compiler can assume that no code past
an accept statement in a task can be executed at elaboration time.


File: gnat_rm.info,  Node: No_Enumeration_Maps,  Next: No_Exception_Handlers,  Prev: No_Entry_Calls_In_Elaboration_Code,  Up: Partition-Wide Restrictions

No_Enumeration_Maps
-------------------

[GNAT] This restriction ensures at compile time that no operations
requiring enumeration maps are used (that is Image and Value attributes
applied to enumeration types).


File: gnat_rm.info,  Node: No_Exception_Handlers,  Next: No_Exception_Propagation,  Prev: No_Enumeration_Maps,  Up: Partition-Wide Restrictions

No_Exception_Handlers
---------------------

[GNAT] This restriction ensures at compile time that there are no
explicit exception handlers. It also indicates that no exception
propagation will be provided. In this mode, exceptions may be raised
but will result in an immediate call to the last chance handler, a
routine that the user must define with the following profile:

     procedure Last_Chance_Handler
       (Source_Location : System.Address; Line : Integer);
     pragma Export (C, Last_Chance_Handler,
                    "__gnat_last_chance_handler");

   The parameter is a C null-terminated string representing a message
to be associated with the exception (typically the source location of
the raise statement generated by the compiler). The Line parameter when
nonzero represents the line number in the source program where the
raise occurs.


File: gnat_rm.info,  Node: No_Exception_Propagation,  Next: No_Exception_Registration,  Prev: No_Exception_Handlers,  Up: Partition-Wide Restrictions

No_Exception_Propagation
------------------------

[GNAT] This restriction guarantees that exceptions are never propagated
to an outer subprogram scope. The only case in which an exception may
be raised is when the handler is statically in the same subprogram, so
that the effect of a raise is essentially like a goto statement. Any
other raise statement (implicit or explicit) will be considered
unhandled. Exception handlers are allowed, but may not contain an
exception occurrence identifier (exception choice). In addition, use of
the package GNAT.Current_Exception is not permitted, and reraise
statements (raise with no operand) are not permitted.


File: gnat_rm.info,  Node: No_Exception_Registration,  Next: No_Exceptions,  Prev: No_Exception_Propagation,  Up: Partition-Wide Restrictions

No_Exception_Registration
-------------------------

[GNAT] This restriction ensures at compile time that no stream
operations for types Exception_Id or Exception_Occurrence are used.
This also makes it impossible to pass exceptions to or from a partition
with this restriction in a distributed environment. If this exception
is active, then the generated code is simplified by omitting the
otherwise-required global registration of exceptions when they are
declared.


File: gnat_rm.info,  Node: No_Exceptions,  Next: No_Finalization,  Prev: No_Exception_Registration,  Up: Partition-Wide Restrictions

No_Exceptions
-------------

[RM H.4] This restriction ensures at compile time that there are no
raise statements and no exception handlers.


File: gnat_rm.info,  Node: No_Finalization,  Next: No_Fixed_Point,  Prev: No_Exceptions,  Up: Partition-Wide Restrictions

No_Finalization
---------------

[GNAT] This restriction disables the language features described in
chapter 7.6 of the Ada 2005 RM as well as all form of code generation
performed by the compiler to support these features. The following types
are no longer considered controlled when this restriction is in effect:
   * `Ada.Finalization.Controlled'

   * `Ada.Finalization.Limited_Controlled'

   * Derivations from `Controlled' or `Limited_Controlled'

   * Class-wide types

   * Protected types

   * Task types

   * Array and record types with controlled components
   The compiler no longer generates code to initialize, finalize or
adjust an object or a nested component, either declared on the stack or
on the heap. The deallocation of a controlled object no longer
finalizes its contents.


File: gnat_rm.info,  Node: No_Fixed_Point,  Next: No_Floating_Point,  Prev: No_Finalization,  Up: Partition-Wide Restrictions

No_Fixed_Point
--------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of fixed point types and operations.


File: gnat_rm.info,  Node: No_Floating_Point,  Next: No_Implicit_Conditionals,  Prev: No_Fixed_Point,  Up: Partition-Wide Restrictions

No_Floating_Point
-----------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of floating point types and operations.


File: gnat_rm.info,  Node: No_Implicit_Conditionals,  Next: No_Implicit_Dynamic_Code,  Prev: No_Floating_Point,  Up: Partition-Wide Restrictions

No_Implicit_Conditionals
------------------------

[GNAT] This restriction ensures that the generated code does not
contain any implicit conditionals, either by modifying the generated
code where possible, or by rejecting any construct that would otherwise
generate an implicit conditional. Note that this check does not include
run time constraint checks, which on some targets may generate implicit
conditionals as well. To control the latter, constraint checks can be
suppressed in the normal manner. Constructs generating implicit
conditionals include comparisons of composite objects and the Max/Min
attributes.


File: gnat_rm.info,  Node: No_Implicit_Dynamic_Code,  Next: No_Implicit_Heap_Allocations,  Prev: No_Implicit_Conditionals,  Up: Partition-Wide Restrictions

No_Implicit_Dynamic_Code
------------------------

[GNAT] This restriction prevents the compiler from building
"trampolines".  This is a structure that is built on the stack and
contains dynamic code to be executed at run time. On some targets, a
trampoline is built for the following features: `Access',
`Unrestricted_Access', or `Address' of a nested subprogram; nested task
bodies; primitive operations of nested tagged types.  Trampolines do
not work on machines that prevent execution of stack data. For example,
on windows systems, enabling DEP (data execution protection) will cause
trampolines to raise an exception.  Trampolines are also quite slow at
run time.

   On many targets, trampolines have been largely eliminated. Look at
the version of system.ads for your target -- if it has
Always_Compatible_Rep equal to False, then trampolines are largely
eliminated. In particular, a trampoline is built for the following
features: `Address' of a nested subprogram; `Access' or
`Unrestricted_Access' of a nested subprogram, but only if pragma
Favor_Top_Level applies, or the access type has a foreign-language
convention; primitive operations of nested tagged types.


File: gnat_rm.info,  Node: No_Implicit_Heap_Allocations,  Next: No_Implicit_Loops,  Prev: No_Implicit_Dynamic_Code,  Up: Partition-Wide Restrictions

No_Implicit_Heap_Allocations
----------------------------

[RM D.7] No constructs are allowed to cause implicit heap allocation.


File: gnat_rm.info,  Node: No_Implicit_Loops,  Next: No_Initialize_Scalars,  Prev: No_Implicit_Heap_Allocations,  Up: Partition-Wide Restrictions

No_Implicit_Loops
-----------------

[GNAT] This restriction ensures that the generated code does not
contain any implicit `for' loops, either by modifying the generated
code where possible, or by rejecting any construct that would otherwise
generate an implicit `for' loop. If this restriction is active, it is
possible to build large array aggregates with all static components
without generating an intermediate temporary, and without generating a
loop to initialize individual components. Otherwise, a loop is created
for arrays larger than about 5000 scalar components.


File: gnat_rm.info,  Node: No_Initialize_Scalars,  Next: No_IO,  Prev: No_Implicit_Loops,  Up: Partition-Wide Restrictions

No_Initialize_Scalars
---------------------

[GNAT] This restriction ensures that no unit in the partition is
compiled with pragma Initialize_Scalars. This allows the generation of
more efficient code, and in particular eliminates dummy null
initialization routines that are otherwise generated for some record
and array types.


File: gnat_rm.info,  Node: No_IO,  Next: No_Local_Allocators,  Prev: No_Initialize_Scalars,  Up: Partition-Wide Restrictions

No_IO
-----

[RM H.4] This restriction ensures at compile time that there are no
dependences on any of the library units Sequential_IO, Direct_IO,
Text_IO, Wide_Text_IO, Wide_Wide_Text_IO, or Stream_IO.


File: gnat_rm.info,  Node: No_Local_Allocators,  Next: No_Local_Protected_Objects,  Prev: No_IO,  Up: Partition-Wide Restrictions

No_Local_Allocators
-------------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of an allocator in subprograms, generic subprograms, tasks,
and entry bodies.


File: gnat_rm.info,  Node: No_Local_Protected_Objects,  Next: No_Local_Timing_Events,  Prev: No_Local_Allocators,  Up: Partition-Wide Restrictions

No_Local_Protected_Objects
--------------------------

[RM D.7] This restriction ensures at compile time that protected
objects are only declared at the library level.


File: gnat_rm.info,  Node: No_Local_Timing_Events,  Next: No_Nested_Finalization,  Prev: No_Local_Protected_Objects,  Up: Partition-Wide Restrictions

No_Local_Timing_Events
----------------------

[RM D.7] All objects of type Ada.Timing_Events.Timing_Event are
declared at the library level.


File: gnat_rm.info,  Node: No_Nested_Finalization,  Next: No_Protected_Type_Allocators,  Prev: No_Local_Timing_Events,  Up: Partition-Wide Restrictions

No_Nested_Finalization
----------------------

[RM D.7] All objects requiring finalization are declared at the library
level.


File: gnat_rm.info,  Node: No_Protected_Type_Allocators,  Next: No_Protected_Types,  Prev: No_Nested_Finalization,  Up: Partition-Wide Restrictions

No_Protected_Type_Allocators
----------------------------

[RM D.7] This restriction ensures at compile time that there are no
allocator expressions that attempt to allocate protected objects.


File: gnat_rm.info,  Node: No_Protected_Types,  Next: No_Recursion,  Prev: No_Protected_Type_Allocators,  Up: Partition-Wide Restrictions

No_Protected_Types
------------------

[RM H.4] This restriction ensures at compile time that there are no
declarations of protected types or protected objects.


File: gnat_rm.info,  Node: No_Recursion,  Next: No_Reentrancy,  Prev: No_Protected_Types,  Up: Partition-Wide Restrictions

No_Recursion
------------

[RM H.4] A program execution is erroneous if a subprogram is invoked as
part of its execution.


File: gnat_rm.info,  Node: No_Reentrancy,  Next: No_Relative_Delay,  Prev: No_Recursion,  Up: Partition-Wide Restrictions

No_Reentrancy
-------------

[RM H.4] A program execution is erroneous if a subprogram is executed by
two tasks at the same time.


File: gnat_rm.info,  Node: No_Relative_Delay,  Next: No_Requeue_Statements,  Prev: No_Reentrancy,  Up: Partition-Wide Restrictions

No_Relative_Delay
-----------------

[RM D.7] This restriction ensures at compile time that there are no
delay relative statements and prevents expressions such as `delay
1.23;' from appearing in source code.


File: gnat_rm.info,  Node: No_Requeue_Statements,  Next: No_Secondary_Stack,  Prev: No_Relative_Delay,  Up: Partition-Wide Restrictions

No_Requeue_Statements
---------------------

[RM D.7] This restriction ensures at compile time that no requeue
statements are permitted and prevents keyword `requeue' from being used
in source code.


File: gnat_rm.info,  Node: No_Secondary_Stack,  Next: No_Select_Statements,  Prev: No_Requeue_Statements,  Up: Partition-Wide Restrictions

No_Secondary_Stack
------------------

[GNAT] This restriction ensures at compile time that the generated code
does not contain any reference to the secondary stack.  The secondary
stack is used to implement functions returning unconstrained objects
(arrays or records) on some targets.


File: gnat_rm.info,  Node: No_Select_Statements,  Next: No_Specific_Termination_Handlers,  Prev: No_Secondary_Stack,  Up: Partition-Wide Restrictions

No_Select_Statements
--------------------

[RM D.7] This restriction ensures at compile time no select statements
of any kind are permitted, that is the keyword `select' may not appear.


File: gnat_rm.info,  Node: No_Specific_Termination_Handlers,  Next: No_Specification_of_Aspect,  Prev: No_Select_Statements,  Up: Partition-Wide Restrictions

No_Specific_Termination_Handlers
--------------------------------

[RM D.7] There are no calls to Ada.Task_Termination.Set_Specific_Handler
or to Ada.Task_Termination.Specific_Handler.


File: gnat_rm.info,  Node: No_Specification_of_Aspect,  Next: No_Standard_Allocators_After_Elaboration,  Prev: No_Specific_Termination_Handlers,  Up: Partition-Wide Restrictions

No_Specification_of_Aspect
--------------------------

[RM 13.12.1] This restriction checks at compile time that no aspect
specification, attribute definition clause, or pragma is given for a
given aspect.


File: gnat_rm.info,  Node: No_Standard_Allocators_After_Elaboration,  Next: No_Standard_Storage_Pools,  Prev: No_Specification_of_Aspect,  Up: Partition-Wide Restrictions

No_Standard_Allocators_After_Elaboration
----------------------------------------

[RM D.7] Specifies that an allocator using a standard storage pool
should never be evaluated at run time after the elaboration of the
library items of the partition has completed. Otherwise, Storage_Error
is raised.


File: gnat_rm.info,  Node: No_Standard_Storage_Pools,  Next: No_Stream_Optimizations,  Prev: No_Standard_Allocators_After_Elaboration,  Up: Partition-Wide Restrictions

No_Standard_Storage_Pools
-------------------------

[GNAT] This restriction ensures at compile time that no access types
use the standard default storage pool.  Any access type declared must
have an explicit Storage_Pool attribute defined specifying a
user-defined storage pool.


File: gnat_rm.info,  Node: No_Stream_Optimizations,  Next: No_Streams,  Prev: No_Standard_Storage_Pools,  Up: Partition-Wide Restrictions

No_Stream_Optimizations
-----------------------

[GNAT] This restriction affects the performance of stream operations on
types `String', `Wide_String' and `Wide_Wide_String'. By default, the
compiler uses block reads and writes when manipulating `String' objects
due to their supperior performance. When this restriction is in effect,
the compiler performs all IO operations on a per-character basis.


File: gnat_rm.info,  Node: No_Streams,  Next: No_Task_Allocators,  Prev: No_Stream_Optimizations,  Up: Partition-Wide Restrictions

No_Streams
----------

[GNAT] This restriction ensures at compile/bind time that there are no
stream objects created and no use of stream attributes.  This
restriction does not forbid dependences on the package `Ada.Streams'.
So it is permissible to with `Ada.Streams' (or another package that
does so itself) as long as no actual stream objects are created and no
stream attributes are used.

   Note that the use of restriction allows optimization of tagged types,
since they do not need to worry about dispatching stream operations.
To take maximum advantage of this space-saving optimization, any unit
declaring a tagged type should be compiled with the restriction, though
this is not required.


File: gnat_rm.info,  Node: No_Task_Allocators,  Next: No_Task_Attributes_Package,  Prev: No_Streams,  Up: Partition-Wide Restrictions

No_Task_Allocators
------------------

[RM D.7] There are no allocators for task types or types containing
task subcomponents.


File: gnat_rm.info,  Node: No_Task_Attributes_Package,  Next: No_Task_Hierarchy,  Prev: No_Task_Allocators,  Up: Partition-Wide Restrictions

No_Task_Attributes_Package
--------------------------

[GNAT] This restriction ensures at compile time that there are no
implicit or explicit dependencies on the package `Ada.Task_Attributes'.


File: gnat_rm.info,  Node: No_Task_Hierarchy,  Next: No_Task_Termination,  Prev: No_Task_Attributes_Package,  Up: Partition-Wide Restrictions

No_Task_Hierarchy
-----------------

[RM D.7] All (non-environment) tasks depend directly on the environment
task of the partition.


File: gnat_rm.info,  Node: No_Task_Termination,  Next: No_Tasking,  Prev: No_Task_Hierarchy,  Up: Partition-Wide Restrictions

No_Task_Termination
-------------------

[RM D.7] Tasks which terminate are erroneous.


File: gnat_rm.info,  Node: No_Tasking,  Next: No_Terminate_Alternatives,  Prev: No_Task_Termination,  Up: Partition-Wide Restrictions

No_Tasking
----------

[GNAT] This restriction prevents the declaration of tasks or task types
throughout the partition.  It is similar in effect to the use of
`Max_Tasks => 0' except that violations are caught at compile time and
cause an error message to be output either by the compiler or binder.


File: gnat_rm.info,  Node: No_Terminate_Alternatives,  Next: No_Unchecked_Access,  Prev: No_Tasking,  Up: Partition-Wide Restrictions

No_Terminate_Alternatives
-------------------------

[RM D.7] There are no selective accepts with terminate alternatives.


File: gnat_rm.info,  Node: No_Unchecked_Access,  Next: Simple_Barriers,  Prev: No_Terminate_Alternatives,  Up: Partition-Wide Restrictions

No_Unchecked_Access
-------------------

[RM H.4] This restriction ensures at compile time that there are no
occurrences of the Unchecked_Access attribute.


File: gnat_rm.info,  Node: Simple_Barriers,  Next: Static_Priorities,  Prev: No_Unchecked_Access,  Up: Partition-Wide Restrictions

Simple_Barriers
---------------

[RM D.7] This restriction ensures at compile time that barriers in entry
declarations for protected types are restricted to either static boolean
expressions or references to simple boolean variables defined in the
private part of the protected type.  No other form of entry barriers is
permitted.


File: gnat_rm.info,  Node: Static_Priorities,  Next: Static_Storage_Size,  Prev: Simple_Barriers,  Up: Partition-Wide Restrictions

Static_Priorities
-----------------

[GNAT] This restriction ensures at compile time that all priority
expressions are static, and that there are no dependences on the package
`Ada.Dynamic_Priorities'.


File: gnat_rm.info,  Node: Static_Storage_Size,  Prev: Static_Priorities,  Up: Partition-Wide Restrictions

Static_Storage_Size
-------------------

[GNAT] This restriction ensures at compile time that any expression
appearing in a Storage_Size pragma or attribute definition clause is
static.


File: gnat_rm.info,  Node: Program Unit Level Restrictions,  Prev: Partition-Wide Restrictions,  Up: Implementation Defined Restrictions

3.2 Program Unit Level Restrictions
===================================

The second set of restriction identifiers does not require
partition-wide consistency.  The restriction may be enforced for a
single compilation unit without any effect on any of the other
compilation units in the partition.

* Menu:

* No_Elaboration_Code::
* No_Entry_Queue::
* No_Implementation_Aspect_Specifications::
* No_Implementation_Attributes::
* No_Implementation_Identifiers::
* No_Implementation_Pragmas::
* No_Implementation_Restrictions::
* No_Implementation_Units::
* No_Implicit_Aliasing::
* No_Obsolescent_Features::
* No_Wide_Characters::
* SPARK::


File: gnat_rm.info,  Node: No_Elaboration_Code,  Next: No_Entry_Queue,  Up: Program Unit Level Restrictions

No_Elaboration_Code
-------------------

[GNAT] This restriction ensures at compile time that no elaboration
code is generated.  Note that this is not the same condition as is
enforced by pragma `Preelaborate'.  There are cases in which pragma
`Preelaborate' still permits code to be generated (e.g. code to
initialize a large array to all zeroes), and there are cases of units
which do not meet the requirements for pragma `Preelaborate', but for
which no elaboration code is generated.  Generally, it is the case that
preelaborable units will meet the restrictions, with the exception of
large aggregates initialized with an others_clause, and exception
declarations (which generate calls to a run-time registry procedure).
This restriction is enforced on a unit by unit basis, it need not be
obeyed consistently throughout a partition.

   In the case of aggregates with others, if the aggregate has a dynamic
size, there is no way to eliminate the elaboration code (such dynamic
bounds would be incompatible with `Preelaborate' in any case). If the
bounds are static, then use of this restriction actually modifies the
code choice of the compiler to avoid generating a loop, and instead
generate the aggregate statically if possible, no matter how many times
the data for the others clause must be repeatedly generated.

   It is not possible to precisely document the constructs which are
compatible with this restriction, since, unlike most other
restrictions, this is not a restriction on the source code, but a
restriction on the generated object code. For example, if the source
contains a declaration:

        Val : constant Integer := X;

where X is not a static constant, it may be possible, depending on
complex optimization circuitry, for the compiler to figure out the
value of X at compile time, in which case this initialization can be
done by the loader, and requires no initialization code. It is not
possible to document the precise conditions under which the optimizer
can figure this out.

   Note that this the implementation of this restriction requires full
code generation. If it is used in conjunction with "semantics only"
checking, then some cases of violations may be missed.


File: gnat_rm.info,  Node: No_Entry_Queue,  Next: No_Implementation_Aspect_Specifications,  Prev: No_Elaboration_Code,  Up: Program Unit Level Restrictions

No_Entry_Queue
--------------

[GNAT] This restriction is a declaration that any protected entry
compiled in the scope of the restriction has at most one task waiting
on the entry at any one time, and so no queue is required.  This
restriction is not checked at compile time.  A program execution is
erroneous if an attempt is made to queue a second task on such an entry.


File: gnat_rm.info,  Node: No_Implementation_Aspect_Specifications,  Next: No_Implementation_Attributes,  Prev: No_Entry_Queue,  Up: Program Unit Level Restrictions

No_Implementation_Aspect_Specifications
---------------------------------------

[RM 13.12.1] This restriction checks at compile time that no
GNAT-defined aspects are present.  With this restriction, the only
aspects that can be used are those defined in the Ada Reference Manual.


File: gnat_rm.info,  Node: No_Implementation_Attributes,  Next: No_Implementation_Identifiers,  Prev: No_Implementation_Aspect_Specifications,  Up: Program Unit Level Restrictions

No_Implementation_Attributes
----------------------------

[RM 13.12.1] This restriction checks at compile time that no
GNAT-defined attributes are present.  With this restriction, the only
attributes that can be used are those defined in the Ada Reference
Manual.


File: gnat_rm.info,  Node: No_Implementation_Identifiers,  Next: No_Implementation_Pragmas,  Prev: No_Implementation_Attributes,  Up: Program Unit Level Restrictions

No_Implementation_Identifiers
-----------------------------

[RM 13.12.1] This restriction checks at compile time that no
implementation-defined identifiers occur within language-defined
packages.


File: gnat_rm.info,  Node: No_Implementation_Pragmas,  Next: No_Implementation_Restrictions,  Prev: No_Implementation_Identifiers,  Up: Program Unit Level Restrictions

No_Implementation_Pragmas
-------------------------

[RM 13.12.1] This restriction checks at compile time that no
GNAT-defined pragmas are present.  With this restriction, the only
pragmas that can be used are those defined in the Ada Reference Manual.


File: gnat_rm.info,  Node: No_Implementation_Restrictions,  Next: No_Implementation_Units,  Prev: No_Implementation_Pragmas,  Up: Program Unit Level Restrictions

No_Implementation_Restrictions
------------------------------

[GNAT] This restriction checks at compile time that no GNAT-defined
restriction identifiers (other than `No_Implementation_Restrictions'
itself) are present.  With this restriction, the only other restriction
identifiers that can be used are those defined in the Ada Reference
Manual.


File: gnat_rm.info,  Node: No_Implementation_Units,  Next: No_Implicit_Aliasing,  Prev: No_Implementation_Restrictions,  Up: Program Unit Level Restrictions

No_Implementation_Units
-----------------------

[RM 13.12.1] This restriction checks at compile time that there is no
mention in the context clause of any implementation-defined descendants
of packages Ada, Interfaces, or System.


File: gnat_rm.info,  Node: No_Implicit_Aliasing,  Next: No_Obsolescent_Features,  Prev: No_Implementation_Units,  Up: Program Unit Level Restrictions

No_Implicit_Aliasing
--------------------

[GNAT] This restriction, which is not required to be partition-wide
consistent, requires an explicit aliased keyword for an object to which
'Access, 'Unchecked_Access, or 'Address is applied, and forbids
entirely the use of the 'Unrestricted_Access attribute for objects.
Note: the reason that Unrestricted_Access is forbidden is that it would
require the prefix to be aliased, and in such cases, it can always be
replaced by the standard attribute Unchecked_Access which is preferable.


File: gnat_rm.info,  Node: No_Obsolescent_Features,  Next: No_Wide_Characters,  Prev: No_Implicit_Aliasing,  Up: Program Unit Level Restrictions

No_Obsolescent_Features
-----------------------

[RM 13.12.1] This restriction checks at compile time that no obsolescent
features are used, as defined in Annex J of the Ada Reference Manual.


File: gnat_rm.info,  Node: No_Wide_Characters,  Next: SPARK,  Prev: No_Obsolescent_Features,  Up: Program Unit Level Restrictions

No_Wide_Characters
------------------

[GNAT] This restriction ensures at compile time that no uses of the
types `Wide_Character' or `Wide_String' or corresponding wide wide types
appear, and that no wide or wide wide string or character literals
appear in the program (that is literals representing characters not in
type `Character'.


File: gnat_rm.info,  Node: SPARK,  Prev: No_Wide_Characters,  Up: Program Unit Level Restrictions

SPARK
-----

[GNAT] This restriction checks at compile time that some constructs
forbidden in SPARK are not present. The SPARK version used as a
reference is the same as the Ada mode for the unit, so a unit compiled
in Ada 95 mode with SPARK restrictions will be checked for constructs
forbidden in SPARK 95.  Error messages related to SPARK restriction have
the form:

     violation of restriction "SPARK" at <file>
      <error message>

   This is not a replacement for the semantic checks performed by the
SPARK Examiner tool, as the compiler only deals currently with code,
not at all with SPARK annotations and does not guarantee catching all
cases of constructs forbidden by SPARK.

   Thus it may well be the case that code which passes the compiler in
SPARK mode is rejected by the SPARK Examiner, e.g. due to the different
visibility rules of the Examiner based on SPARK `inherit' annotations.

   This restriction can be useful in providing an initial filter for
code developed using SPARK, or in examining legacy code to see how far
it is from meeting SPARK restrictions.


File: gnat_rm.info,  Node: Implementation Advice,  Next: Implementation Defined Characteristics,  Prev: Implementation Defined Restrictions,  Up: Top

4 Implementation Advice
***********************

The main text of the Ada Reference Manual describes the required
behavior of all Ada compilers, and the GNAT compiler conforms to these
requirements.

   In addition, there are sections throughout the Ada Reference Manual
headed by the phrase "Implementation advice".  These sections are not
normative, i.e., they do not specify requirements that all compilers
must follow.  Rather they provide advice on generally desirable
behavior.  You may wonder why they are not requirements.  The most
typical answer is that they describe behavior that seems generally
desirable, but cannot be provided on all systems, or which may be
undesirable on some systems.

   As far as practical, GNAT follows the implementation advice sections
in the Ada Reference Manual.  This chapter contains a table giving the
reference manual section number, paragraph number and several keywords
for each advice.  Each entry consists of the text of the advice followed
by the GNAT interpretation of this advice.  Most often, this simply says
"followed", which means that GNAT follows the advice.  However, in a
number of cases, GNAT deliberately deviates from this advice, in which
case the text describes what GNAT does and why.

1.1.3(20): Error Detection
==========================


If an implementation detects the use of an unsupported Specialized Needs
Annex feature at run time, it should raise `Program_Error' if feasible.
Not relevant.  All specialized needs annex features are either
supported, or diagnosed at compile time.

1.1.3(31): Child Units
======================


If an implementation wishes to provide implementation-defined
extensions to the functionality of a language-defined library unit, it
should normally do so by adding children to the library unit.
Followed.

1.1.5(12): Bounded Errors
=========================


If an implementation detects a bounded error or erroneous execution, it
should raise `Program_Error'.
Followed in all cases in which the implementation detects a bounded
error or erroneous execution.  Not all such situations are detected at
runtime.

2.8(16): Pragmas
================


Normally, implementation-defined pragmas should have no semantic effect
for error-free programs; that is, if the implementation-defined pragmas
are removed from a working program, the program should still be legal,
and should still have the same semantics.
The following implementation defined pragmas are exceptions to this
rule:

`Abort_Defer'
     Affects semantics

`Ada_83'
     Affects legality

`Assert'
     Affects semantics

`CPP_Class'
     Affects semantics

`CPP_Constructor'
     Affects semantics

`Debug'
     Affects semantics

`Interface_Name'
     Affects semantics

`Machine_Attribute'
     Affects semantics

`Unimplemented_Unit'
     Affects legality

`Unchecked_Union'
     Affects semantics

In each of the above cases, it is essential to the purpose of the pragma
that this advice not be followed.  For details see the separate section
on implementation defined pragmas.

2.8(17-19): Pragmas
===================


Normally, an implementation should not define pragmas that can make an
illegal program legal, except as follows:


   A pragma used to complete a declaration, such as a pragma `Import';


   A pragma used to configure the environment by adding, removing, or
replacing `library_items'.
   See response to paragraph 16 of this same section.

3.5.2(5): Alternative Character Sets
====================================


If an implementation supports a mode with alternative interpretations
for `Character' and `Wide_Character', the set of graphic characters of
`Character' should nevertheless remain a proper subset of the set of
graphic characters of `Wide_Character'.  Any character set
"localizations" should be reflected in the results of the subprograms
defined in the language-defined package `Characters.Handling' (see A.3)
available in such a mode.  In a mode with an alternative interpretation
of `Character', the implementation should also support a corresponding
change in what is a legal `identifier_letter'.
Not all wide character modes follow this advice, in particular the JIS
and IEC modes reflect standard usage in Japan, and in these encoding,
the upper half of the Latin-1 set is not part of the wide-character
subset, since the most significant bit is used for wide character
encoding.  However, this only applies to the external forms.  Internally
there is no such restriction.

3.5.4(28): Integer Types
========================


An implementation should support `Long_Integer' in addition to
`Integer' if the target machine supports 32-bit (or longer) arithmetic.
No other named integer subtypes are recommended for package
`Standard'.  Instead, appropriate named integer subtypes should be
provided in the library package `Interfaces' (see B.2).
`Long_Integer' is supported.  Other standard integer types are supported
so this advice is not fully followed.  These types are supported for
convenient interface to C, and so that all hardware types of the
machine are easily available.

3.5.4(29): Integer Types
========================


An implementation for a two's complement machine should support modular
types with a binary modulus up to `System.Max_Int*2+2'.  An
implementation should support a non-binary modules up to `Integer'Last'.
Followed.

3.5.5(8): Enumeration Values
============================


For the evaluation of a call on `S'Pos' for an enumeration subtype, if
the value of the operand does not correspond to the internal code for
any enumeration literal of its type (perhaps due to an un-initialized
variable), then the implementation should raise `Program_Error'.  This
is particularly important for enumeration types with noncontiguous
internal codes specified by an enumeration_representation_clause.
Followed.

3.5.7(17): Float Types
======================


An implementation should support `Long_Float' in addition to `Float' if
the target machine supports 11 or more digits of precision.  No other
named floating point subtypes are recommended for package `Standard'.
Instead, appropriate named floating point subtypes should be provided
in the library package `Interfaces' (see B.2).
`Short_Float' and `Long_Long_Float' are also provided.  The former
provides improved compatibility with other implementations supporting
this type.  The latter corresponds to the highest precision
floating-point type supported by the hardware.  On most machines, this
will be the same as `Long_Float', but on some machines, it will
correspond to the IEEE extended form.  The notable case is all ia32
(x86) implementations, where `Long_Long_Float' corresponds to the
80-bit extended precision format supported in hardware on this
processor.  Note that the 128-bit format on SPARC is not supported,
since this is a software rather than a hardware format.

3.6.2(11): Multidimensional Arrays
==================================


An implementation should normally represent multidimensional arrays in
row-major order, consistent with the notation used for multidimensional
array aggregates (see 4.3.3).  However, if a pragma `Convention'
(`Fortran', ...) applies to a multidimensional array type, then
column-major order should be used instead (see B.5, "Interfacing with
Fortran").
Followed.

9.6(30-31): Duration'Small
==========================


Whenever possible in an implementation, the value of `Duration'Small'
should be no greater than 100 microseconds.
Followed.  (`Duration'Small' = 10**(-9)).


   The time base for `delay_relative_statements' should be monotonic;
it need not be the same time base as used for `Calendar.Clock'.
   Followed.

10.2.1(12): Consistent Representation
=====================================


In an implementation, a type declared in a pre-elaborated package should
have the same representation in every elaboration of a given version of
the package, whether the elaborations occur in distinct executions of
the same program, or in executions of distinct programs or partitions
that include the given version.
Followed, except in the case of tagged types.  Tagged types involve
implicit pointers to a local copy of a dispatch table, and these
pointers have representations which thus depend on a particular
elaboration of the package.  It is not easy to see how it would be
possible to follow this advice without severely impacting efficiency of
execution.

11.4.1(19): Exception Information
=================================


`Exception_Message' by default and `Exception_Information' should
produce information useful for debugging.  `Exception_Message' should
be short, about one line.  `Exception_Information' can be long.
`Exception_Message' should not include the `Exception_Name'.
`Exception_Information' should include both the `Exception_Name' and
the `Exception_Message'.
Followed.  For each exception that doesn't have a specified
`Exception_Message', the compiler generates one containing the location
of the raise statement.  This location has the form "file:line", where
file is the short file name (without path information) and line is the
line number in the file.  Note that in the case of the Zero Cost
Exception mechanism, these messages become redundant with the
Exception_Information that contains a full backtrace of the calling
sequence, so they are disabled.  To disable explicitly the generation
of the source location message, use the Pragma `Discard_Names'.

11.5(28): Suppression of Checks
===============================


The implementation should minimize the code executed for checks that
have been suppressed.
Followed.

13.1 (21-24): Representation Clauses
====================================


The recommended level of support for all representation items is
qualified as follows:


   An implementation need not support representation items containing
non-static expressions, except that an implementation should support a
representation item for a given entity if each non-static expression in
the representation item is a name that statically denotes a constant
declared before the entity.
   Followed.  In fact, GNAT goes beyond the recommended level of support
by allowing nonstatic expressions in some representation clauses even
without the need to declare constants initialized with the values of
such expressions.  For example:

       X : Integer;
       Y : Float;
       for Y'Address use X'Address;>>


   An implementation need not support a specification for the `Size'
for a given composite subtype, nor the size or storage place for an
object (including a component) of a given composite subtype, unless the
constraints on the subtype and its composite subcomponents (if any) are
all static constraints.
   Followed.  Size Clauses are not permitted on non-static components,
as described above.


   An aliased component, or a component whose type is by-reference,
should always be allocated at an addressable location.
   Followed.

13.2(6-8): Packed Types
=======================


If a type is packed, then the implementation should try to minimize
storage allocated to objects of the type, possibly at the expense of
speed of accessing components, subject to reasonable complexity in
addressing calculations.


   The recommended level of support pragma `Pack' is:

   For a packed record type, the components should be packed as tightly
as possible subject to the Sizes of the component subtypes, and subject
to any `record_representation_clause' that applies to the type; the
implementation may, but need not, reorder components or cross aligned
word boundaries to improve the packing.  A component whose `Size' is
greater than the word size may be allocated an integral number of words.
   Followed.  Tight packing of arrays is supported for all component
sizes up to 64-bits. If the array component size is 1 (that is to say,
if the component is a boolean type or an enumeration type with two
values) then values of the type are implicitly initialized to zero. This
happens both for objects of the packed type, and for objects that have a
subcomponent of the packed type.


   An implementation should support Address clauses for imported
subprograms.
   Followed.  

13.3(14-19): Address Clauses
============================


For an array X, `X'Address' should point at the first component of the
array, and not at the array bounds.
Followed.


   The recommended level of support for the `Address' attribute is:

   `X'Address' should produce a useful result if X is an object that is
aliased or of a by-reference type, or is an entity whose `Address' has
been specified.
   Followed.  A valid address will be produced even if none of those
conditions have been met.  If necessary, the object is forced into
memory to ensure the address is valid.


   An implementation should support `Address' clauses for imported
subprograms.
   Followed.


   Objects (including subcomponents) that are aliased or of a
by-reference type should be allocated on storage element boundaries.
   Followed.


   If the `Address' of an object is specified, or it is imported or
exported, then the implementation should not perform optimizations
based on assumptions of no aliases.
   Followed.

13.3(29-35): Alignment Clauses
==============================


The recommended level of support for the `Alignment' attribute for
subtypes is:

   An implementation should support specified Alignments that are
factors and multiples of the number of storage elements per word,
subject to the following:
Followed.


   An implementation need not support specified `Alignment's for
combinations of `Size's and `Alignment's that cannot be easily loaded
and stored by available machine instructions.
   Followed.


   An implementation need not support specified `Alignment's that are
greater than the maximum `Alignment' the implementation ever returns by
default.
   Followed.


   The recommended level of support for the `Alignment' attribute for
objects is:

   Same as above, for subtypes, but in addition:
   Followed.


   For stand-alone library-level objects of statically constrained
subtypes, the implementation should support all `Alignment's supported
by the target linker.  For example, page alignment is likely to be
supported for such objects, but not for subtypes.
   Followed.

13.3(42-43): Size Clauses
=========================


The recommended level of support for the `Size' attribute of objects is:

   A `Size' clause should be supported for an object if the specified
`Size' is at least as large as its subtype's `Size', and corresponds to
a size in storage elements that is a multiple of the object's
`Alignment' (if the `Alignment' is nonzero).
Followed.

13.3(50-56): Size Clauses
=========================


If the `Size' of a subtype is specified, and allows for efficient
independent addressability (see 9.10) on the target architecture, then
the `Size' of the following objects of the subtype should equal the
`Size' of the subtype:

   Aliased objects (including components).
Followed.


   `Size' clause on a composite subtype should not affect the internal
layout of components.
   Followed. But note that this can be overridden by use of the
implementation pragma Implicit_Packing in the case of packed arrays.


   The recommended level of support for the `Size' attribute of
subtypes is:


   The `Size' (if not specified) of a static discrete or fixed point
subtype should be the number of bits needed to represent each value
belonging to the subtype using an unbiased representation, leaving space
for a sign bit only if the subtype contains negative values.  If such a
subtype is a first subtype, then an implementation should support a
specified `Size' for it that reflects this representation.
   Followed.


   For a subtype implemented with levels of indirection, the `Size'
should include the size of the pointers, but not the size of what they
point at.
   Followed.

13.3(71-73): Component Size Clauses
===================================


The recommended level of support for the `Component_Size' attribute is:


   An implementation need not support specified `Component_Sizes' that
are less than the `Size' of the component subtype.
   Followed.


   An implementation should support specified `Component_Size's that
are factors and multiples of the word size.  For such
`Component_Size's, the array should contain no gaps between components.
For other `Component_Size's (if supported), the array should contain
no gaps between components when packing is also specified; the
implementation should forbid this combination in cases where it cannot
support a no-gaps representation.
   Followed.

13.4(9-10): Enumeration Representation Clauses
==============================================


The recommended level of support for enumeration representation clauses
is:

   An implementation need not support enumeration representation clauses
for boolean types, but should at minimum support the internal codes in
the range `System.Min_Int.System.Max_Int'.
Followed.

13.5.1(17-22): Record Representation Clauses
============================================


The recommended level of support for
`record_representation_clauses' is:

   An implementation should support storage places that can be extracted
with a load, mask, shift sequence of machine code, and set with a load,
shift, mask, store sequence, given the available machine instructions
and run-time model.
Followed.


   A storage place should be supported if its size is equal to the
`Size' of the component subtype, and it starts and ends on a boundary
that obeys the `Alignment' of the component subtype.
   Followed.


   If the default bit ordering applies to the declaration of a given
type, then for a component whose subtype's `Size' is less than the word
size, any storage place that does not cross an aligned word boundary
should be supported.
   Followed.


   An implementation may reserve a storage place for the tag field of a
tagged type, and disallow other components from overlapping that place.
   Followed.  The storage place for the tag field is the beginning of
the tagged record, and its size is Address'Size.  GNAT will reject an
explicit component clause for the tag field.


   An implementation need not support a `component_clause' for a
component of an extension part if the storage place is not after the
storage places of all components of the parent type, whether or not
those storage places had been specified.
   Followed.  The above advice on record representation clauses is
followed, and all mentioned features are implemented.

13.5.2(5): Storage Place Attributes
===================================


If a component is represented using some form of pointer (such as an
offset) to the actual data of the component, and this data is contiguous
with the rest of the object, then the storage place attributes should
reflect the place of the actual data, not the pointer.  If a component
is allocated discontinuously from the rest of the object, then a warning
should be generated upon reference to one of its storage place
attributes.
Followed.  There are no such components in GNAT.

13.5.3(7-8): Bit Ordering
=========================


The recommended level of support for the non-default bit ordering is:


   If `Word_Size' = `Storage_Unit', then the implementation should
support the non-default bit ordering in addition to the default bit
ordering.
   Followed.  Word size does not equal storage size in this
implementation.  Thus non-default bit ordering is not supported.

13.7(37): Address as Private
============================


`Address' should be of a private type.
Followed.

13.7.1(16): Address Operations
==============================


Operations in `System' and its children should reflect the target
environment semantics as closely as is reasonable.  For example, on most
machines, it makes sense for address arithmetic to "wrap around".
Operations that do not make sense should raise `Program_Error'.
Followed.  Address arithmetic is modular arithmetic that wraps around.
No operation raises `Program_Error', since all operations make sense.

13.9(14-17): Unchecked Conversion
=================================


The `Size' of an array object should not include its bounds; hence, the
bounds should not be part of the converted data.
Followed.


   The implementation should not generate unnecessary run-time checks to
ensure that the representation of S is a representation of the target
type.  It should take advantage of the permission to return by
reference when possible.  Restrictions on unchecked conversions should
be avoided unless required by the target environment.
   Followed.  There are no restrictions on unchecked conversion.  A
warning is generated if the source and target types do not have the
same size since the semantics in this case may be target dependent.


   The recommended level of support for unchecked conversions is:


   Unchecked conversions should be supported and should be reversible in
the cases where this clause defines the result.  To enable meaningful
use of unchecked conversion, a contiguous representation should be used
for elementary subtypes, for statically constrained array subtypes whose
component subtype is one of the subtypes described in this paragraph,
and for record subtypes without discriminants whose component subtypes
are described in this paragraph.
   Followed.

13.11(23-25): Implicit Heap Usage
=================================


An implementation should document any cases in which it dynamically
allocates heap storage for a purpose other than the evaluation of an
allocator.
Followed, the only other points at which heap storage is dynamically
allocated are as follows:

   * At initial elaboration time, to allocate dynamically sized global
     objects.

   * To allocate space for a task when a task is created.

   * To extend the secondary stack dynamically when needed.  The
     secondary stack is used for returning variable length results.


   A default (implementation-provided) storage pool for an
access-to-constant type should not have overhead to support
deallocation of individual objects.
   Followed.


   A storage pool for an anonymous access type should be created at the
point of an allocator for the type, and be reclaimed when the designated
object becomes inaccessible.
   Followed.

13.11.2(17): Unchecked De-allocation
====================================


For a standard storage pool, `Free' should actually reclaim the storage.
Followed.

13.13.2(17): Stream Oriented Attributes
=======================================


If a stream element is the same size as a storage element, then the
normal in-memory representation should be used by `Read' and `Write'
for scalar objects.  Otherwise, `Read' and `Write' should use the
smallest number of stream elements needed to represent all values in
the base range of the scalar type.

   Followed.  By default, GNAT uses the interpretation suggested by
AI-195, which specifies using the size of the first subtype.  However,
such an implementation is based on direct binary representations and is
therefore target- and endianness-dependent.  To address this issue,
GNAT also supplies an alternate implementation of the stream attributes
`Read' and `Write', which uses the target-independent XDR standard
representation for scalar types.  The XDR implementation is provided as
an alternative body of the `System.Stream_Attributes' package, in the
file `s-stratt-xdr.adb' in the GNAT library.  There is no
`s-stratt-xdr.ads' file.  In order to install the XDR implementation,
do the following:
  1. Replace the default implementation of the
     `System.Stream_Attributes' package with the XDR implementation.
     For example on a Unix platform issue the commands:
          $ mv s-stratt.adb s-stratt-default.adb
          $ mv s-stratt-xdr.adb s-stratt.adb

  2. Rebuild the GNAT run-time library as documented in *Note GNAT and
     Libraries: (gnat_ugn)GNAT and Libraries.

A.1(52): Names of Predefined Numeric Types
==========================================


If an implementation provides additional named predefined integer types,
then the names should end with `Integer' as in `Long_Integer'.  If an
implementation provides additional named predefined floating point
types, then the names should end with `Float' as in `Long_Float'.
Followed.

A.3.2(49): `Ada.Characters.Handling'
====================================


If an implementation provides a localized definition of `Character' or
`Wide_Character', then the effects of the subprograms in
`Characters.Handling' should reflect the localizations.  See also 3.5.2.
Followed.  GNAT provides no such localized definitions.

A.4.4(106): Bounded-Length String Handling
==========================================


Bounded string objects should not be implemented by implicit pointers
and dynamic allocation.
Followed.  No implicit pointers or dynamic allocation are used.

A.5.2(46-47): Random Number Generation
======================================


Any storage associated with an object of type `Generator' should be
reclaimed on exit from the scope of the object.
Followed.


   If the generator period is sufficiently long in relation to the
number of distinct initiator values, then each possible value of
`Initiator' passed to `Reset' should initiate a sequence of random
numbers that does not, in a practical sense, overlap the sequence
initiated by any other value.  If this is not possible, then the mapping
between initiator values and generator states should be a rapidly
varying function of the initiator value.
   Followed.  The generator period is sufficiently long for the first
condition here to hold true.

A.10.7(23): `Get_Immediate'
===========================


The `Get_Immediate' procedures should be implemented with unbuffered
input.  For a device such as a keyboard, input should be "available" if
a key has already been typed, whereas for a disk file, input should
always be available except at end of file.  For a file associated with
a keyboard-like device, any line-editing features of the underlying
operating system should be disabled during the execution of
`Get_Immediate'.
Followed on all targets except VxWorks. For VxWorks, there is no way to
provide this functionality that does not result in the input buffer
being flushed before the `Get_Immediate' call. A special unit
`Interfaces.Vxworks.IO' is provided that contains routines to enable
this functionality.

B.1(39-41): Pragma `Export'
===========================


If an implementation supports pragma `Export' to a given language, then
it should also allow the main subprogram to be written in that
language.  It should support some mechanism for invoking the elaboration
of the Ada library units included in the system, and for invoking the
finalization of the environment task.  On typical systems, the
recommended mechanism is to provide two subprograms whose link names are
`adainit' and `adafinal'.  `adainit' should contain the elaboration
code for library units.  `adafinal' should contain the finalization
code.  These subprograms should have no effect the second and
subsequent time they are called.
Followed.


   Automatic elaboration of pre-elaborated packages should be provided
when pragma `Export' is supported.
   Followed when the main program is in Ada.  If the main program is in
a foreign language, then `adainit' must be called to elaborate
pre-elaborated packages.


   For each supported convention L other than `Intrinsic', an
implementation should support `Import' and `Export' pragmas for objects
of L-compatible types and for subprograms, and pragma `Convention' for
L-eligible types and for subprograms, presuming the other language has
corresponding features.  Pragma `Convention' need not be supported for
scalar types.
   Followed.

B.2(12-13): Package `Interfaces'
================================


For each implementation-defined convention identifier, there should be a
child package of package Interfaces with the corresponding name.  This
package should contain any declarations that would be useful for
interfacing to the language (implementation) represented by the
convention.  Any declarations useful for interfacing to any language on
the given hardware architecture should be provided directly in
`Interfaces'.
Followed. An additional package not defined in the Ada Reference Manual
is `Interfaces.CPP', used for interfacing to C++.


   An implementation supporting an interface to C, COBOL, or Fortran
should provide the corresponding package or packages described in the
following clauses.
   Followed.  GNAT provides all the packages described in this section.

B.3(63-71): Interfacing with C
==============================


An implementation should support the following interface correspondences
between Ada and C.
Followed.


   An Ada procedure corresponds to a void-returning C function.
   Followed.


   An Ada function corresponds to a non-void C function.
   Followed.


   An Ada `in' scalar parameter is passed as a scalar argument to a C
function.
   Followed.


   An Ada `in' parameter of an access-to-object type with designated
type T is passed as a `T*' argument to a C function, where T is the C
type corresponding to the Ada type T.
   Followed.


   An Ada access T parameter, or an Ada `out' or `in out' parameter of
an elementary type T, is passed as a `T*' argument to a C function,
where T is the C type corresponding to the Ada type T.  In the case of
an elementary `out' or `in out' parameter, a pointer to a temporary
copy is used to preserve by-copy semantics.
   Followed.


   An Ada parameter of a record type T, of any mode, is passed as a
`T*' argument to a C function, where T is the C structure corresponding
to the Ada type T.
   Followed.  This convention may be overridden by the use of the
C_Pass_By_Copy pragma, or Convention, or by explicitly specifying the
mechanism for a given call using an extended import or export pragma.


   An Ada parameter of an array type with component type T, of any
mode, is passed as a `T*' argument to a C function, where T is the C
type corresponding to the Ada type T.
   Followed.


   An Ada parameter of an access-to-subprogram type is passed as a
pointer to a C function whose prototype corresponds to the designated
subprogram's specification.
   Followed.

B.4(95-98): Interfacing with COBOL
==================================


An Ada implementation should support the following interface
correspondences between Ada and COBOL.
Followed.


   An Ada access T parameter is passed as a `BY REFERENCE' data item of
the COBOL type corresponding to T.
   Followed.


   An Ada in scalar parameter is passed as a `BY CONTENT' data item of
the corresponding COBOL type.
   Followed.


   Any other Ada parameter is passed as a `BY REFERENCE' data item of
the COBOL type corresponding to the Ada parameter type; for scalars, a
local copy is used if necessary to ensure by-copy semantics.
   Followed.

B.5(22-26): Interfacing with Fortran
====================================


An Ada implementation should support the following interface
correspondences between Ada and Fortran:
Followed.


   An Ada procedure corresponds to a Fortran subroutine.
   Followed.


   An Ada function corresponds to a Fortran function.
   Followed.


   An Ada parameter of an elementary, array, or record type T is passed
as a T argument to a Fortran procedure, where T is the Fortran type
corresponding to the Ada type T, and where the INTENT attribute of the
corresponding dummy argument matches the Ada formal parameter mode; the
Fortran implementation's parameter passing conventions are used.  For
elementary types, a local copy is used if necessary to ensure by-copy
semantics.
   Followed.


   An Ada parameter of an access-to-subprogram type is passed as a
reference to a Fortran procedure whose interface corresponds to the
designated subprogram's specification.
   Followed.

C.1(3-5): Access to Machine Operations
======================================


The machine code or intrinsic support should allow access to all
operations normally available to assembly language programmers for the
target environment, including privileged instructions, if any.
Followed.


   The interfacing pragmas (see Annex B) should support interface to
assembler; the default assembler should be associated with the
convention identifier `Assembler'.
   Followed.


   If an entity is exported to assembly language, then the
implementation should allocate it at an addressable location, and
should ensure that it is retained by the linking process, even if not
otherwise referenced from the Ada code.  The implementation should
assume that any call to a machine code or assembler subprogram is
allowed to read or update every object that is specified as exported.
   Followed.

C.1(10-16): Access to Machine Operations
========================================


The implementation should ensure that little or no overhead is
associated with calling intrinsic and machine-code subprograms.
Followed for both intrinsics and machine-code subprograms.


   It is recommended that intrinsic subprograms be provided for
convenient access to any machine operations that provide special
capabilities or efficiency and that are not otherwise available through
the language constructs.
   Followed.  A full set of machine operation intrinsic subprograms is
provided.


   Atomic read-modify-write operations--e.g., test and set, compare and
swap, decrement and test, enqueue/dequeue.
   Followed on any target supporting such operations.


   Standard numeric functions--e.g., sin, log.
   Followed on any target supporting such operations.


   String manipulation operations--e.g., translate and test.
   Followed on any target supporting such operations.


   Vector operations--e.g., compare vector against thresholds.
   Followed on any target supporting such operations.


   Direct operations on I/O ports.
   Followed on any target supporting such operations.

C.3(28): Interrupt Support
==========================


If the `Ceiling_Locking' policy is not in effect, the implementation
should provide means for the application to specify which interrupts
are to be blocked during protected actions, if the underlying system
allows for a finer-grain control of interrupt blocking.
Followed.  The underlying system does not allow for finer-grain control
of interrupt blocking.

C.3.1(20-21): Protected Procedure Handlers
==========================================


Whenever possible, the implementation should allow interrupt handlers to
be called directly by the hardware.
Followed on any target where the underlying operating system permits
such direct calls.


   Whenever practical, violations of any implementation-defined
restrictions should be detected before run time.
   Followed.  Compile time warnings are given when possible.

C.3.2(25): Package `Interrupts'
===============================


If implementation-defined forms of interrupt handler procedures are
supported, such as protected procedures with parameters, then for each
such form of a handler, a type analogous to `Parameterless_Handler'
should be specified in a child package of `Interrupts', with the same
operations as in the predefined package Interrupts.
Followed.

C.4(14): Pre-elaboration Requirements
=====================================


It is recommended that pre-elaborated packages be implemented in such a
way that there should be little or no code executed at run time for the
elaboration of entities not already covered by the Implementation
Requirements.
Followed.  Executable code is generated in some cases, e.g. loops to
initialize large arrays.

C.5(8): Pragma `Discard_Names'
==============================


If the pragma applies to an entity, then the implementation should
reduce the amount of storage used for storing names associated with that
entity.
Followed.

C.7.2(30): The Package Task_Attributes
======================================


Some implementations are targeted to domains in which memory use at run
time must be completely deterministic.  For such implementations, it is
recommended that the storage for task attributes will be pre-allocated
statically and not from the heap.  This can be accomplished by either
placing restrictions on the number and the size of the task's
attributes, or by using the pre-allocated storage for the first N
attribute objects, and the heap for the others.  In the latter case, N
should be documented.
Not followed.  This implementation is not targeted to such a domain.

D.3(17): Locking Policies
=========================


The implementation should use names that end with `_Locking' for
locking policies defined by the implementation.
Followed.  Two implementation-defined locking policies are defined,
whose names (`Inheritance_Locking' and `Concurrent_Readers_Locking')
follow this suggestion.

D.4(16): Entry Queuing Policies
===============================


Names that end with `_Queuing' should be used for all
implementation-defined queuing policies.
Followed.  No such implementation-defined queuing policies exist.

D.6(9-10): Preemptive Abort
===========================


Even though the `abort_statement' is included in the list of
potentially blocking operations (see 9.5.1), it is recommended that this
statement be implemented in a way that never requires the task executing
the `abort_statement' to block.
Followed.


   On a multi-processor, the delay associated with aborting a task on
another processor should be bounded; the implementation should use
periodic polling, if necessary, to achieve this.
   Followed.

D.7(21): Tasking Restrictions
=============================


When feasible, the implementation should take advantage of the specified
restrictions to produce a more efficient implementation.
GNAT currently takes advantage of these restrictions by providing an
optimized run time when the Ravenscar profile and the GNAT restricted
run time set of restrictions are specified.  See pragma `Profile
(Ravenscar)' and pragma `Profile (Restricted)' for more details.

D.8(47-49): Monotonic Time
==========================


When appropriate, implementations should provide configuration
mechanisms to change the value of `Tick'.
Such configuration mechanisms are not appropriate to this implementation
and are thus not supported.


   It is recommended that `Calendar.Clock' and `Real_Time.Clock' be
implemented as transformations of the same time base.
   Followed.


   It is recommended that the "best" time base which exists in the
underlying system be available to the application through `Clock'.
"Best" may mean highest accuracy or largest range.
   Followed.

E.5(28-29): Partition Communication Subsystem
=============================================


Whenever possible, the PCS on the called partition should allow for
multiple tasks to call the RPC-receiver with different messages and
should allow them to block until the corresponding subprogram body
returns.
Followed by GLADE, a separately supplied PCS that can be used with GNAT.


   The `Write' operation on a stream of type `Params_Stream_Type'
should raise `Storage_Error' if it runs out of space trying to write
the `Item' into the stream.
   Followed by GLADE, a separately supplied PCS that can be used with
GNAT.

F(7): COBOL Support
===================


If COBOL (respectively, C) is widely supported in the target
environment, implementations supporting the Information Systems Annex
should provide the child package `Interfaces.COBOL' (respectively,
`Interfaces.C') specified in Annex B and should support a
`convention_identifier' of COBOL (respectively, C) in the interfacing
pragmas (see Annex B), thus allowing Ada programs to interface with
programs written in that language.
Followed.

F.1(2): Decimal Radix Support
=============================


Packed decimal should be used as the internal representation for objects
of subtype S when S'Machine_Radix = 10.
Not followed.  GNAT ignores S'Machine_Radix and always uses binary
representations.

G: Numerics
===========



If Fortran (respectively, C) is widely supported in the target
environment, implementations supporting the Numerics Annex should
provide the child package `Interfaces.Fortran' (respectively,
`Interfaces.C') specified in Annex B and should support a
`convention_identifier' of Fortran (respectively, C) in the interfacing
pragmas (see Annex B), thus allowing Ada programs to interface with
programs written in that language.
Followed.

G.1.1(56-58): Complex Types
===========================



Because the usual mathematical meaning of multiplication of a complex
operand and a real operand is that of the scaling of both components of
the former by the latter, an implementation should not perform this
operation by first promoting the real operand to complex type and then
performing a full complex multiplication.  In systems that, in the
future, support an Ada binding to IEC 559:1989, the latter technique
will not generate the required result when one of the components of the
complex operand is infinite.  (Explicit multiplication of the infinite
component by the zero component obtained during promotion yields a NaN
that propagates into the final result.) Analogous advice applies in the
case of multiplication of a complex operand and a pure-imaginary
operand, and in the case of division of a complex operand by a real or
pure-imaginary operand.
Not followed.


   Similarly, because the usual mathematical meaning of addition of a
complex operand and a real operand is that the imaginary operand remains
unchanged, an implementation should not perform this operation by first
promoting the real operand to complex type and then performing a full
complex addition.  In implementations in which the `Signed_Zeros'
attribute of the component type is `True' (and which therefore conform
to IEC 559:1989 in regard to the handling of the sign of zero in
predefined arithmetic operations), the latter technique will not
generate the required result when the imaginary component of the complex
operand is a negatively signed zero.  (Explicit addition of the negative
zero to the zero obtained during promotion yields a positive zero.)
Analogous advice applies in the case of addition of a complex operand
and a pure-imaginary operand, and in the case of subtraction of a
complex operand and a real or pure-imaginary operand.
   Not followed.


   Implementations in which `Real'Signed_Zeros' is `True' should
attempt to provide a rational treatment of the signs of zero results and
result components.  As one example, the result of the `Argument'
function should have the sign of the imaginary component of the
parameter `X' when the point represented by that parameter lies on the
positive real axis; as another, the sign of the imaginary component of
the `Compose_From_Polar' function should be the same as (respectively,
the opposite of) that of the `Argument' parameter when that parameter
has a value of zero and the `Modulus' parameter has a nonnegative
(respectively, negative) value.
   Followed.

G.1.2(49): Complex Elementary Functions
=======================================


Implementations in which `Complex_Types.Real'Signed_Zeros' is `True'
should attempt to provide a rational treatment of the signs of zero
results and result components.  For example, many of the complex
elementary functions have components that are odd functions of one of
the parameter components; in these cases, the result component should
have the sign of the parameter component at the origin.  Other complex
elementary functions have zero components whose sign is opposite that of
a parameter component at the origin, or is always positive or always
negative.
Followed.

G.2.4(19): Accuracy Requirements
================================


The versions of the forward trigonometric functions without a `Cycle'
parameter should not be implemented by calling the corresponding
version with a `Cycle' parameter of `2.0*Numerics.Pi', since this will
not provide the required accuracy in some portions of the domain.  For
the same reason, the version of `Log' without a `Base' parameter should
not be implemented by calling the corresponding version with a `Base'
parameter of `Numerics.e'.
Followed.

G.2.6(15): Complex Arithmetic Accuracy
======================================


The version of the `Compose_From_Polar' function without a `Cycle'
parameter should not be implemented by calling the corresponding
version with a `Cycle' parameter of `2.0*Numerics.Pi', since this will
not provide the required accuracy in some portions of the domain.
Followed.


File: gnat_rm.info,  Node: Implementation Defined Characteristics,  Next: Intrinsic Subprograms,  Prev: Implementation Advice,  Up: Top

5 Implementation Defined Characteristics
****************************************

In addition to the implementation dependent pragmas and attributes, and
the implementation advice, there are a number of other Ada features
that are potentially implementation dependent and are designated as
implementation-defined. These are mentioned throughout the Ada Reference
Manual, and are summarized in Annex M.

   A requirement for conforming Ada compilers is that they provide
documentation describing how the implementation deals with each of these
issues.  In this chapter, you will find each point in Annex M listed
followed by a description in italic font of how GNAT handles the
implementation dependence.

   You can use this chapter as a guide to minimizing implementation
dependent features in your programs if portability to other compilers
and other operating systems is an important consideration.  The numbers
in each section below correspond to the paragraph number in the Ada
Reference Manual.


*2*.  Whether or not each recommendation given in Implementation Advice
is followed.  See 1.1.2(37).
   *Note Implementation Advice::.


*3*.  Capacity limitations of the implementation.  See 1.1.3(3).
   The complexity of programs that can be processed is limited only by
the total amount of available virtual memory, and disk space for the
generated object files.


*4*.  Variations from the standard that are impractical to avoid given
the implementation's execution environment.  See 1.1.3(6).
   There are no variations from the standard.


*5*.  Which `code_statement's cause external interactions.  See
1.1.3(10).
   Any `code_statement' can potentially cause external interactions.


*6*.  The coded representation for the text of an Ada program.  See
2.1(4).
   See separate section on source representation.


*7*.  The control functions allowed in comments.  See 2.1(14).
   See separate section on source representation.


*8*.  The representation for an end of line.  See 2.2(2).
   See separate section on source representation.


*9*.  Maximum supported line length and lexical element length.  See
2.2(15).
   The maximum line length is 255 characters and the maximum length of a
lexical element is also 255 characters.


*10*.  Implementation defined pragmas.  See 2.8(14).
   *Note Implementation Defined Pragmas::.


*11*.  Effect of pragma `Optimize'.  See 2.8(27).
   Pragma `Optimize', if given with a `Time' or `Space' parameter,
checks that the optimization flag is set, and aborts if it is not.


*12*.  The sequence of characters of the value returned by `S'Image'
when some of the graphic characters of `S'Wide_Image' are not defined
in `Character'.  See 3.5(37).
   The sequence of characters is as defined by the wide character
encoding method used for the source.  See section on source
representation for further details.


*13*.  The predefined integer types declared in `Standard'.  See
3.5.4(25).

`Short_Short_Integer'
     8 bit signed

`Short_Integer'
     (Short) 16 bit signed

`Integer'
     32 bit signed

`Long_Integer'
     64 bit signed (on most 64 bit targets, depending on the C
     definition of long).  32 bit signed (all other targets)

`Long_Long_Integer'
     64 bit signed


*14*.  Any nonstandard integer types and the operators defined for
them.  See 3.5.4(26).
   There are no nonstandard integer types.


*15*.  Any nonstandard real types and the operators defined for them.
See 3.5.6(8).
   There are no nonstandard real types.


*16*.  What combinations of requested decimal precision and range are
supported for floating point types.  See 3.5.7(7).
   The precision and range is as defined by the IEEE standard.


*17*.  The predefined floating point types declared in `Standard'.  See
3.5.7(16).

`Short_Float'
     32 bit IEEE short

`Float'
     (Short) 32 bit IEEE short

`Long_Float'
     64 bit IEEE long

`Long_Long_Float'
     64 bit IEEE long (80 bit IEEE long on x86 processors)


*18*.  The small of an ordinary fixed point type.  See 3.5.9(8).
   `Fine_Delta' is 2**(-63)


*19*.  What combinations of small, range, and digits are supported for
fixed point types.  See 3.5.9(10).
   Any combinations are permitted that do not result in a small less
than `Fine_Delta' and do not result in a mantissa larger than 63 bits.
If the mantissa is larger than 53 bits on machines where Long_Long_Float
is 64 bits (true of all architectures except ia32), then the output from
Text_IO is accurate to only 53 bits, rather than the full mantissa.
This is because floating-point conversions are used to convert fixed
point.


*20*.  The result of `Tags.Expanded_Name' for types declared within an
unnamed `block_statement'.  See 3.9(10).
   Block numbers of the form `BNNN', where NNN is a decimal integer are
allocated.


*21*.  Implementation-defined attributes.  See 4.1.4(12).
   *Note Implementation Defined Attributes::.


*22*.  Any implementation-defined time types.  See 9.6(6).
   There are no implementation-defined time types.


*23*.  The time base associated with relative delays.
   See 9.6(20).  The time base used is that provided by the C library
function `gettimeofday'.


*24*.  The time base of the type `Calendar.Time'.  See 9.6(23).
   The time base used is that provided by the C library function
`gettimeofday'.


*25*.  The time zone used for package `Calendar' operations.  See
9.6(24).
   The time zone used by package `Calendar' is the current system time
zone setting for local time, as accessed by the C library function
`localtime'.


*26*.  Any limit on `delay_until_statements' of `select_statements'.
See 9.6(29).
   There are no such limits.


*27*.  Whether or not two non-overlapping parts of a composite object
are independently addressable, in the case where packing, record
layout, or `Component_Size' is specified for the object.  See 9.10(1).
   Separate components are independently addressable if they do not
share overlapping storage units.


*28*.  The representation for a compilation.  See 10.1(2).
   A compilation is represented by a sequence of files presented to the
compiler in a single invocation of the `gcc' command.


*29*.  Any restrictions on compilations that contain multiple
compilation_units.  See 10.1(4).
   No single file can contain more than one compilation unit, but any
sequence of files can be presented to the compiler as a single
compilation.


*30*.  The mechanisms for creating an environment and for adding and
replacing compilation units.  See 10.1.4(3).
   See separate section on compilation model.


*31*.  The manner of explicitly assigning library units to a partition.
See 10.2(2).
   If a unit contains an Ada main program, then the Ada units for the
partition are determined by recursive application of the rules in the
Ada Reference Manual section 10.2(2-6).  In other words, the Ada units
will be those that are needed by the main program, and then this
definition of need is applied recursively to those units, and the
partition contains the transitive closure determined by this
relationship.  In short, all the necessary units are included, with no
need to explicitly specify the list.  If additional units are required,
e.g. by foreign language units, then all units must be mentioned in the
context clause of one of the needed Ada units.

   If the partition contains no main program, or if the main program is
in a language other than Ada, then GNAT provides the binder options
`-z' and `-n' respectively, and in this case a list of units can be
explicitly supplied to the binder for inclusion in the partition (all
units needed by these units will also be included automatically).  For
full details on the use of these options, refer to *Note The GNAT Make
Program gnatmake: (gnat_ugn)The GNAT Make Program gnatmake.


*32*.  The implementation-defined means, if any, of specifying which
compilation units are needed by a given compilation unit.  See 10.2(2).
   The units needed by a given compilation unit are as defined in the
Ada Reference Manual section 10.2(2-6).  There are no
implementation-defined pragmas or other implementation-defined means
for specifying needed units.


*33*.  The manner of designating the main subprogram of a partition.
See 10.2(7).
   The main program is designated by providing the name of the
corresponding `ALI' file as the input parameter to the binder.


*34*.  The order of elaboration of `library_items'.  See 10.2(18).
   The first constraint on ordering is that it meets the requirements of
Chapter 10 of the Ada Reference Manual.  This still leaves some
implementation dependent choices, which are resolved by first
elaborating bodies as early as possible (i.e., in preference to specs
where there is a choice), and second by evaluating the immediate with
clauses of a unit to determine the probably best choice, and third by
elaborating in alphabetical order of unit names where a choice still
remains.


*35*.  Parameter passing and function return for the main subprogram.
See 10.2(21).
   The main program has no parameters.  It may be a procedure, or a
function returning an integer type.  In the latter case, the returned
integer value is the return code of the program (overriding any value
that may have been set by a call to `Ada.Command_Line.Set_Exit_Status').


*36*.  The mechanisms for building and running partitions.  See
10.2(24).
   GNAT itself supports programs with only a single partition.  The
GNATDIST tool provided with the GLADE package (which also includes an
implementation of the PCS) provides a completely flexible method for
building and running programs consisting of multiple partitions.  See
the separate GLADE manual for details.


*37*.  The details of program execution, including program termination.
See 10.2(25).
   See separate section on compilation model.


*38*.  The semantics of any non-active partitions supported by the
implementation.  See 10.2(28).
   Passive partitions are supported on targets where shared memory is
provided by the operating system.  See the GLADE reference manual for
further details.


*39*.  The information returned by `Exception_Message'.  See 11.4.1(10).
   Exception message returns the null string unless a specific message
has been passed by the program.


*40*.  The result of `Exceptions.Exception_Name' for types declared
within an unnamed `block_statement'.  See 11.4.1(12).
   Blocks have implementation defined names of the form `BNNN' where
NNN is an integer.


*41*.  The information returned by `Exception_Information'.  See
11.4.1(13).
   `Exception_Information' returns a string in the following format:

     _Exception_Name:_ nnnnn
     _Message:_ mmmmm
     _PID:_ ppp
     _Call stack traceback locations:_
     0xhhhh 0xhhhh 0xhhhh ... 0xhhh

where

   * `nnnn' is the fully qualified name of the exception in all upper
     case letters. This line is always present.

   * `mmmm' is the message (this line present only if message is
     non-null)

   * `ppp' is the Process Id value as a decimal integer (this line is
     present only if the Process Id is nonzero). Currently we are not
     making use of this field.

   * The Call stack traceback locations line and the following values
     are present only if at least one traceback location was recorded.
     The values are given in C style format, with lower case letters
     for a-f, and only as many digits present as are necessary.

The line terminator sequence at the end of each line, including the
last line is a single `LF' character (`16#0A#').


*42*.  Implementation-defined check names.  See 11.5(27).
   The implementation defined check name Alignment_Check controls
checking of address clause values for proper alignment (that is, the
address supplied must be consistent with the alignment of the type).

   In addition, a user program can add implementation-defined check
names by means of the pragma Check_Name.


*43*.  The interpretation of each aspect of representation.  See
13.1(20).
   See separate section on data representations.


*44*.  Any restrictions placed upon representation items.  See 13.1(20).
   See separate section on data representations.


*45*.  The meaning of `Size' for indefinite subtypes.  See 13.3(48).
   Size for an indefinite subtype is the maximum possible size, except
that for the case of a subprogram parameter, the size of the parameter
object is the actual size.


*46*.  The default external representation for a type tag.  See
13.3(75).
   The default external representation for a type tag is the fully
expanded name of the type in upper case letters.


*47*.  What determines whether a compilation unit is the same in two
different partitions.  See 13.3(76).
   A compilation unit is the same in two different partitions if and
only if it derives from the same source file.


*48*.  Implementation-defined components.  See 13.5.1(15).
   The only implementation defined component is the tag for a tagged
type, which contains a pointer to the dispatching table.


*49*.  If `Word_Size' = `Storage_Unit', the default bit ordering.  See
13.5.3(5).
   `Word_Size' (32) is not the same as `Storage_Unit' (8) for this
implementation, so no non-default bit ordering is supported.  The
default bit ordering corresponds to the natural endianness of the
target architecture.


*50*.  The contents of the visible part of package `System' and its
language-defined children.  See 13.7(2).
   See the definition of these packages in files `system.ads' and
`s-stoele.ads'.


*51*.  The contents of the visible part of package
`System.Machine_Code', and the meaning of `code_statements'.  See
13.8(7).
   See the definition and documentation in file `s-maccod.ads'.


*52*.  The effect of unchecked conversion.  See 13.9(11).
   Unchecked conversion between types of the same size results in an
uninterpreted transmission of the bits from one type to the other.  If
the types are of unequal sizes, then in the case of discrete types, a
shorter source is first zero or sign extended as necessary, and a
shorter target is simply truncated on the left.  For all non-discrete
types, the source is first copied if necessary to ensure that the
alignment requirements of the target are met, then a pointer is
constructed to the source value, and the result is obtained by
dereferencing this pointer after converting it to be a pointer to the
target type. Unchecked conversions where the target subtype is an
unconstrained array are not permitted. If the target alignment is
greater than the source alignment, then a copy of the result is made
with appropriate alignment


*53*. The semantics of operations on invalid representations.  See
13.9.2(10-11).
   For assignments and other operations where the use of invalid values
cannot result in erroneous behavior, the compiler ignores the
possibility of invalid values. An exception is raised at the point
where an invalid value would result in erroneous behavior. For example
executing:

     procedure invalidvals is
        X : Integer := -1;
        Y : Natural range 1 .. 10;
        for Y'Address use X'Address;
        Z : Natural range 1 .. 10;
        A : array (Natural range 1 .. 10) of Integer;
     begin
        Z := Y;     -- no exception
        A (Z) := 3; -- exception raised;
     end;

As indicated, an exception is raised on the array assignment, but not
on the simple assignment of the invalid negative value from Y to Z.


*53*.  The manner of choosing a storage pool for an access type when
`Storage_Pool' is not specified for the type.  See 13.11(17).
   There are 3 different standard pools used by the compiler when
`Storage_Pool' is not specified depending whether the type is local to
a subprogram or defined at the library level and whether
`Storage_Size'is specified or not.  See documentation in the runtime
library units `System.Pool_Global', `System.Pool_Size' and
`System.Pool_Local' in files `s-poosiz.ads', `s-pooglo.ads' and
`s-pooloc.ads' for full details on the default pools used.


*54*.  Whether or not the implementation provides user-accessible names
for the standard pool type(s).  See 13.11(17).
   See documentation in the sources of the run time mentioned in
paragraph *53* .  All these pools are accessible by means of `with''ing
these units.


*55*.  The meaning of `Storage_Size'.  See 13.11(18).
   `Storage_Size' is measured in storage units, and refers to the total
space available for an access type collection, or to the primary stack
space for a task.


*56*.  Implementation-defined aspects of storage pools.  See 13.11(22).
   See documentation in the sources of the run time mentioned in
paragraph *53* for details on GNAT-defined aspects of storage pools.


*57*.  The set of restrictions allowed in a pragma `Restrictions'.  See
13.12(7).
   *Note Implementation Defined Restrictions::.


*58*.  The consequences of violating limitations on `Restrictions'
pragmas.  See 13.12(9).
   Restrictions that can be checked at compile time result in
illegalities if violated.  Currently there are no other consequences of
violating restrictions.


*59*.  The representation used by the `Read' and `Write' attributes of
elementary types in terms of stream elements.  See 13.13.2(9).
   The representation is the in-memory representation of the base type
of the type, using the number of bits corresponding to the `TYPE'Size'
value, and the natural ordering of the machine.


*60*.  The names and characteristics of the numeric subtypes declared
in the visible part of package `Standard'.  See A.1(3).
   See items describing the integer and floating-point types supported.


*61*.  The accuracy actually achieved by the elementary functions.  See
A.5.1(1).
   The elementary functions correspond to the functions available in
the C library.  Only fast math mode is implemented.


*62*.  The sign of a zero result from some of the operators or
functions in `Numerics.Generic_Elementary_Functions', when
`Float_Type'Signed_Zeros' is `True'.  See A.5.1(46).
   The sign of zeroes follows the requirements of the IEEE 754 standard
on floating-point.


*63*.  The value of `Numerics.Float_Random.Max_Image_Width'.  See
A.5.2(27).
   Maximum image width is 6864, see library file `s-rannum.ads'.


*64*.  The value of `Numerics.Discrete_Random.Max_Image_Width'.  See
A.5.2(27).
   Maximum image width is 6864, see library file `s-rannum.ads'.


*65*.  The algorithms for random number generation.  See A.5.2(32).
   The algorithm is the Mersenne Twister, as documented in the source
file `s-rannum.adb'. This version of the algorithm has a period of
2**19937-1.


*66*.  The string representation of a random number generator's state.
See A.5.2(38).
   The value returned by the Image function is the concatenation of the
fixed-width decimal representations of the 624 32-bit integers of the
state vector.


*67*.  The minimum time interval between calls to the time-dependent
Reset procedure that are guaranteed to initiate different random number
sequences.  See A.5.2(45).
   The minimum period between reset calls to guarantee distinct series
of random numbers is one microsecond.


*68*.  The values of the `Model_Mantissa', `Model_Emin',
`Model_Epsilon', `Model', `Safe_First', and `Safe_Last' attributes, if
the Numerics Annex is not supported.  See A.5.3(72).
   Run the compiler with `-gnatS' to produce a listing of package
`Standard', has the values of all numeric attributes.


*69*.  Any implementation-defined characteristics of the input-output
packages.  See A.7(14).
   There are no special implementation defined characteristics for these
packages.


*70*.  The value of `Buffer_Size' in `Storage_IO'.  See A.9(10).
   All type representations are contiguous, and the `Buffer_Size' is
the value of `TYPE'Size' rounded up to the next storage unit boundary.


*71*.  External files for standard input, standard output, and standard
error See A.10(5).
   These files are mapped onto the files provided by the C streams
libraries.  See source file `i-cstrea.ads' for further details.


*72*.  The accuracy of the value produced by `Put'.  See A.10.9(36).
   If more digits are requested in the output than are represented by
the precision of the value, zeroes are output in the corresponding least
significant digit positions.


*73*.  The meaning of `Argument_Count', `Argument', and `Command_Name'.
See A.15(1).
   These are mapped onto the `argv' and `argc' parameters of the main
program in the natural manner.


*74*.  The interpretation of the `Form' parameter in procedure
`Create_Directory'.  See A.16(56).
   The `Form' parameter is not used.


*75*.  The interpretation of the `Form' parameter in procedure
`Create_Path'.  See A.16(60).
   The `Form' parameter is not used.


*76*.  The interpretation of the `Form' parameter in procedure
`Copy_File'.  See A.16(68).
   The `Form' parameter is case-insensitive.

   Two fields are recognized in the `Form' parameter:

`preserve=<value>'

`mode=<value>'

<value> starts immediately after the character '=' and ends with the
character immediately preceding the next comma (',') or with the last
character of the parameter.

   The only possible values for preserve= are:

`no_attributes'
     Do not try to preserve any file attributes. This is the default if
     no preserve= is found in Form.

`all_attributes'
     Try to preserve all file attributes (timestamps, access rights).

`timestamps'
     Preserve the timestamp of the copied file, but not the other file
     attributes.


The only possible values for mode= are:

`copy'
     Only do the copy if the destination file does not already exist.
     If it already exists, Copy_File fails.

`overwrite'
     Copy the file in all cases. Overwrite an already existing
     destination file.

`append'
     Append the original file to the destination file. If the
     destination file does not exist, the destination file is a copy of
     the source file. When mode=append, the field preserve=, if it
     exists, is not taken into account.


If the Form parameter includes one or both of the fields and the value
or values are incorrect, Copy_file fails with Use_Error.

   Examples of correct Forms:

     Form => "preserve=no_attributes,mode=overwrite" (the default)
     Form => "mode=append"
     Form => "mode=copy, preserve=all_attributes"

Examples of incorrect Forms

     Form => "preserve=junk"
     Form => "mode=internal, preserve=timestamps"


*77*.  Implementation-defined convention names.  See B.1(11).
   The following convention names are supported

`Ada'
     Ada

`Ada_Pass_By_Copy'
     Allowed for any types except by-reference types such as limited
     records. Compatible with convention Ada, but causes any parameters
     with this convention to be passed by copy.

`Ada_Pass_By_Reference'
     Allowed for any types except by-copy types such as scalars.
     Compatible with convention Ada, but causes any parameters with
     this convention to be passed by reference.

`Assembler'
     Assembly language

`Asm'
     Synonym for Assembler

`Assembly'
     Synonym for Assembler

`C'
     C

`C_Pass_By_Copy'
     Allowed only for record types, like C, but also notes that record
     is to be passed by copy rather than reference.

`COBOL'
     COBOL

`C_Plus_Plus (or CPP)'
     C++

`Default'
     Treated the same as C

`External'
     Treated the same as C

`Fortran'
     Fortran

`Intrinsic'
     For support of pragma `Import' with convention Intrinsic, see
     separate section on Intrinsic Subprograms.

`Stdcall'
     Stdcall (used for Windows implementations only).  This convention
     correspond to the WINAPI (previously called Pascal convention)
     C/C++ convention under Windows.  A routine with this convention
     cleans the stack before exit. This pragma cannot be applied to a
     dispatching call.

`DLL'
     Synonym for Stdcall

`Win32'
     Synonym for Stdcall

`Stubbed'
     Stubbed is a special convention used to indicate that the body of
     the subprogram will be entirely ignored.  Any call to the
     subprogram is converted into a raise of the `Program_Error'
     exception.  If a pragma `Import' specifies convention `stubbed'
     then no body need be present at all.  This convention is useful
     during development for the inclusion of subprograms whose body has
     not yet been written.

   In addition, all otherwise unrecognized convention names are also
treated as being synonymous with convention C.  In all implementations
except for VMS, use of such other names results in a warning.  In VMS
implementations, these names are accepted silently.


*78*.  The meaning of link names.  See B.1(36).
   Link names are the actual names used by the linker.


*79*.  The manner of choosing link names when neither the link name nor
the address of an imported or exported entity is specified.  See
B.1(36).
   The default linker name is that which would be assigned by the
relevant external language, interpreting the Ada name as being in all
lower case letters.


*80*.  The effect of pragma `Linker_Options'.  See B.1(37).
   The string passed to `Linker_Options' is presented uninterpreted as
an argument to the link command, unless it contains ASCII.NUL
characters.  NUL characters if they appear act as argument separators,
so for example

     pragma Linker_Options ("-labc" & ASCII.NUL & "-ldef");

causes two separate arguments `-labc' and `-ldef' to be passed to the
linker. The order of linker options is preserved for a given unit. The
final list of options passed to the linker is in reverse order of the
elaboration order. For example, linker options for a body always appear
before the options from the corresponding package spec.


*81*.  The contents of the visible part of package `Interfaces' and its
language-defined descendants.  See B.2(1).
   See files with prefix `i-' in the distributed library.


*82*.  Implementation-defined children of package `Interfaces'.  The
contents of the visible part of package `Interfaces'.  See B.2(11).
   See files with prefix `i-' in the distributed library.


*83*.  The types `Floating', `Long_Floating', `Binary', `Long_Binary',
`Decimal_ Element', and `COBOL_Character'; and the initialization of
the variables `Ada_To_COBOL' and `COBOL_To_Ada', in `Interfaces.COBOL'.
See B.4(50).

`Floating'
     Float

`Long_Floating'
     (Floating) Long_Float

`Binary'
     Integer

`Long_Binary'
     Long_Long_Integer

`Decimal_Element'
     Character

`COBOL_Character'
     Character

For initialization, see the file `i-cobol.ads' in the distributed
library.


*84*.  Support for access to machine instructions.  See C.1(1).
   See documentation in file `s-maccod.ads' in the distributed library.


*85*.  Implementation-defined aspects of access to machine operations.
See C.1(9).
   See documentation in file `s-maccod.ads' in the distributed library.


*86*.  Implementation-defined aspects of interrupts.  See C.3(2).
   Interrupts are mapped to signals or conditions as appropriate.  See
definition of unit `Ada.Interrupt_Names' in source file `a-intnam.ads'
for details on the interrupts supported on a particular target.


*87*.  Implementation-defined aspects of pre-elaboration.  See C.4(13).
   GNAT does not permit a partition to be restarted without reloading,
except under control of the debugger.


*88*.  The semantics of pragma `Discard_Names'.  See C.5(7).
   Pragma `Discard_Names' causes names of enumeration literals to be
suppressed.  In the presence of this pragma, the Image attribute
provides the image of the Pos of the literal, and Value accepts Pos
values.


*89*.  The result of the `Task_Identification.Image' attribute.  See
C.7.1(7).
   The result of this attribute is a string that identifies the object
or component that denotes a given task. If a variable `Var' has a task
type, the image for this task will have the form `Var_XXXXXXXX', where
the suffix is the hexadecimal representation of the virtual address of
the corresponding task control block. If the variable is an array of
tasks, the image of each task will have the form of an indexed
component indicating the position of a given task in the array, e.g.
`Group(5)_XXXXXXX'. If the task is a component of a record, the image
of the task will have the form of a selected component. These rules are
fully recursive, so that the image of a task that is a subcomponent of
a composite object corresponds to the expression that designates this
task.  If a task is created by an allocator, its image depends on the
context. If the allocator is part of an object declaration, the rules
described above are used to construct its image, and this image is not
affected by subsequent assignments. If the allocator appears within an
expression, the image includes only the name of the task type.  If the
configuration pragma Discard_Names is present, or if the restriction
No_Implicit_Heap_Allocation is in effect,  the image reduces to the
numeric suffix, that is to say the hexadecimal representation of the
virtual address of the control block of the task.

*90*.  The value of `Current_Task' when in a protected entry or
interrupt handler.  See C.7.1(17).
   Protected entries or interrupt handlers can be executed by any
convenient thread, so the value of `Current_Task' is undefined.


*91*.  The effect of calling `Current_Task' from an entry body or
interrupt handler.  See C.7.1(19).
   The effect of calling `Current_Task' from an entry body or interrupt
handler is to return the identification of the task currently executing
the code.


*92*.  Implementation-defined aspects of `Task_Attributes'.  See
C.7.2(19).
   There are no implementation-defined aspects of `Task_Attributes'.


*93*.  Values of all `Metrics'.  See D(2).
   The metrics information for GNAT depends on the performance of the
underlying operating system.  The sources of the run-time for tasking
implementation, together with the output from `-gnatG' can be used to
determine the exact sequence of operating systems calls made to
implement various tasking constructs.  Together with appropriate
information on the performance of the underlying operating system, on
the exact target in use, this information can be used to determine the
required metrics.


*94*.  The declarations of `Any_Priority' and `Priority'.  See D.1(11).
   See declarations in file `system.ads'.


*95*.  Implementation-defined execution resources.  See D.1(15).
   There are no implementation-defined execution resources.


*96*.  Whether, on a multiprocessor, a task that is waiting for access
to a protected object keeps its processor busy.  See D.2.1(3).
   On a multi-processor, a task that is waiting for access to a
protected object does not keep its processor busy.


*97*.  The affect of implementation defined execution resources on task
dispatching.  See D.2.1(9).
   Tasks map to threads in the threads package used by GNAT.  Where
possible and appropriate, these threads correspond to native threads of
the underlying operating system.


*98*.  Implementation-defined `policy_identifiers' allowed in a pragma
`Task_Dispatching_Policy'.  See D.2.2(3).
   There are no implementation-defined policy-identifiers allowed in
this pragma.


*99*.  Implementation-defined aspects of priority inversion.  See
D.2.2(16).
   Execution of a task cannot be preempted by the implementation
processing of delay expirations for lower priority tasks.


*100*.  Implementation-defined task dispatching.  See D.2.2(18).
   The policy is the same as that of the underlying threads
implementation.


*101*.  Implementation-defined `policy_identifiers' allowed in a pragma
`Locking_Policy'.  See D.3(4).
   The two implementation defined policies permitted in GNAT are
`Inheritance_Locking' and  `Conccurent_Readers_Locking'.  On targets
that support the `Inheritance_Locking' policy, locking is implemented
by inheritance, i.e. the task owning the lock operates at a priority
equal to the highest priority of any task currently requesting the
lock.  On targets that support the `Conccurent_Readers_Locking' policy,
locking is implemented with a read/write lock allowing multiple
propected object functions to enter concurrently.


*102*.  Default ceiling priorities.  See D.3(10).
   The ceiling priority of protected objects of the type
`System.Interrupt_Priority'Last' as described in the Ada Reference
Manual D.3(10),


*103*.  The ceiling of any protected object used internally by the
implementation.  See D.3(16).
   The ceiling priority of internal protected objects is
`System.Priority'Last'.


*104*.  Implementation-defined queuing policies.  See D.4(1).
   There are no implementation-defined queuing policies.


*105*.  On a multiprocessor, any conditions that cause the completion
of an aborted construct to be delayed later than what is specified for
a single processor.  See D.6(3).
   The semantics for abort on a multi-processor is the same as on a
single processor, there are no further delays.


*106*.  Any operations that implicitly require heap storage allocation.
See D.7(8).
   The only operation that implicitly requires heap storage allocation
is task creation.


*107*.  Implementation-defined aspects of pragma `Restrictions'.  See
D.7(20).
   There are no such implementation-defined aspects.


*108*.  Implementation-defined aspects of package `Real_Time'.  See
D.8(17).
   There are no implementation defined aspects of package `Real_Time'.


*109*.  Implementation-defined aspects of `delay_statements'.  See
D.9(8).
   Any difference greater than one microsecond will cause the task to be
delayed (see D.9(7)).


*110*.  The upper bound on the duration of interrupt blocking caused by
the implementation.  See D.12(5).
   The upper bound is determined by the underlying operating system.  In
no cases is it more than 10 milliseconds.


*111*.  The means for creating and executing distributed programs.  See
E(5).
   The GLADE package provides a utility GNATDIST for creating and
executing distributed programs.  See the GLADE reference manual for
further details.


*112*.  Any events that can result in a partition becoming
inaccessible.  See E.1(7).
   See the GLADE reference manual for full details on such events.


*113*.  The scheduling policies, treatment of priorities, and
management of shared resources between partitions in certain cases.  See
E.1(11).
   See the GLADE reference manual for full details on these aspects of
multi-partition execution.


*114*.  Events that cause the version of a compilation unit to change.
See E.3(5).
   Editing the source file of a compilation unit, or the source files of
any units on which it is dependent in a significant way cause the
version to change.  No other actions cause the version number to
change.  All changes are significant except those which affect only
layout, capitalization or comments.


*115*.  Whether the execution of the remote subprogram is immediately
aborted as a result of cancellation.  See E.4(13).
   See the GLADE reference manual for details on the effect of abort in
a distributed application.


*116*.  Implementation-defined aspects of the PCS.  See E.5(25).
   See the GLADE reference manual for a full description of all
implementation defined aspects of the PCS.


*117*.  Implementation-defined interfaces in the PCS.  See E.5(26).
   See the GLADE reference manual for a full description of all
implementation defined interfaces.


*118*.  The values of named numbers in the package `Decimal'.  See
F.2(7).

`Max_Scale'
     +18

`Min_Scale'
     -18

`Min_Delta'
     1.0E-18

`Max_Delta'
     1.0E+18

`Max_Decimal_Digits'
     18


*119*.  The value of `Max_Picture_Length' in the package
`Text_IO.Editing'.  See F.3.3(16).
   64


*120*.  The value of `Max_Picture_Length' in the package
`Wide_Text_IO.Editing'.  See F.3.4(5).
   64


*121*.  The accuracy actually achieved by the complex elementary
functions and by other complex arithmetic operations.  See G.1(1).
   Standard library functions are used for the complex arithmetic
operations.  Only fast math mode is currently supported.


*122*.  The sign of a zero result (or a component thereof) from any
operator or function in `Numerics.Generic_Complex_Types', when
`Real'Signed_Zeros' is True.  See G.1.1(53).
   The signs of zero values are as recommended by the relevant
implementation advice.


*123*.  The sign of a zero result (or a component thereof) from any
operator or function in
`Numerics.Generic_Complex_Elementary_Functions', when
`Real'Signed_Zeros' is `True'.  See G.1.2(45).
   The signs of zero values are as recommended by the relevant
implementation advice.


*124*.  Whether the strict mode or the relaxed mode is the default.
See G.2(2).
   The strict mode is the default.  There is no separate relaxed mode.
GNAT provides a highly efficient implementation of strict mode.


*125*.  The result interval in certain cases of fixed-to-float
conversion.  See G.2.1(10).
   For cases where the result interval is implementation dependent, the
accuracy is that provided by performing all operations in 64-bit IEEE
floating-point format.


*126*.  The result of a floating point arithmetic operation in overflow
situations, when the `Machine_Overflows' attribute of the result type
is `False'.  See G.2.1(13).
   Infinite and NaN values are produced as dictated by the IEEE
floating-point standard.

   Note that on machines that are not fully compliant with the IEEE
floating-point standard, such as Alpha, the `-mieee' compiler flag must
be used for achieving IEEE conforming behavior (although at the cost of
a significant performance penalty), so infinite and NaN values are
properly generated.


*127*.  The result interval for division (or exponentiation by a
negative exponent), when the floating point hardware implements division
as multiplication by a reciprocal.  See G.2.1(16).
   Not relevant, division is IEEE exact.


*128*.  The definition of close result set, which determines the
accuracy of certain fixed point multiplications and divisions.  See
G.2.3(5).
   Operations in the close result set are performed using IEEE long
format floating-point arithmetic.  The input operands are converted to
floating-point, the operation is done in floating-point, and the result
is converted to the target type.


*129*.  Conditions on a `universal_real' operand of a fixed point
multiplication or division for which the result shall be in the perfect
result set.  See G.2.3(22).
   The result is only defined to be in the perfect result set if the
result can be computed by a single scaling operation involving a scale
factor representable in 64-bits.


*130*.  The result of a fixed point arithmetic operation in overflow
situations, when the `Machine_Overflows' attribute of the result type
is `False'.  See G.2.3(27).
   Not relevant, `Machine_Overflows' is `True' for fixed-point types.


*131*.  The result of an elementary function reference in overflow
situations, when the `Machine_Overflows' attribute of the result type
is `False'.  See G.2.4(4).
   IEEE infinite and Nan values are produced as appropriate.


*132*.  The value of the angle threshold, within which certain
elementary functions, complex arithmetic operations, and complex
elementary functions yield results conforming to a maximum relative
error bound.  See G.2.4(10).
   Information on this subject is not yet available.


*133*.  The accuracy of certain elementary functions for parameters
beyond the angle threshold.  See G.2.4(10).
   Information on this subject is not yet available.


*134*.  The result of a complex arithmetic operation or complex
elementary function reference in overflow situations, when the
`Machine_Overflows' attribute of the corresponding real type is
`False'.  See G.2.6(5).
   IEEE infinite and Nan values are produced as appropriate.


*135*.  The accuracy of certain complex arithmetic operations and
certain complex elementary functions for parameters (or components
thereof) beyond the angle threshold.  See G.2.6(8).
   Information on those subjects is not yet available.


*136*.  Information regarding bounded errors and erroneous execution.
See H.2(1).
   Information on this subject is not yet available.


*137*.  Implementation-defined aspects of pragma `Inspection_Point'.
See H.3.2(8).
   Pragma `Inspection_Point' ensures that the variable is live and can
be examined by the debugger at the inspection point.


*138*.  Implementation-defined aspects of pragma `Restrictions'.  See
H.4(25).
   There are no implementation-defined aspects of pragma
`Restrictions'.  The use of pragma `Restrictions [No_Exceptions]' has
no effect on the generated code.  Checks must suppressed by use of
pragma `Suppress'.


*139*.  Any restrictions on pragma `Restrictions'.  See H.4(27).
   There are no restrictions on pragma `Restrictions'.


File: gnat_rm.info,  Node: Intrinsic Subprograms,  Next: Representation Clauses and Pragmas,  Prev: Implementation Defined Characteristics,  Up: Top

6 Intrinsic Subprograms
***********************

* Menu:

* Intrinsic Operators::
* Enclosing_Entity::
* Exception_Information::
* Exception_Message::
* Exception_Name::
* File::
* Line::
* Shifts and Rotates::
* Source_Location::

GNAT allows a user application program to write the declaration:

        pragma Import (Intrinsic, name);

providing that the name corresponds to one of the implemented intrinsic
subprograms in GNAT, and that the parameter profile of the referenced
subprogram meets the requirements.  This chapter describes the set of
implemented intrinsic subprograms, and the requirements on parameter
profiles.  Note that no body is supplied; as with other uses of pragma
Import, the body is supplied elsewhere (in this case by the compiler
itself).  Note that any use of this feature is potentially
non-portable, since the Ada standard does not require Ada compilers to
implement this feature.


File: gnat_rm.info,  Node: Intrinsic Operators,  Next: Enclosing_Entity,  Up: Intrinsic Subprograms

6.1 Intrinsic Operators
=======================

All the predefined numeric operators in package Standard in `pragma
Import (Intrinsic,..)' declarations.  In the binary operator case, the
operands must have the same size.  The operand or operands must also be
appropriate for the operator.  For example, for addition, the operands
must both be floating-point or both be fixed-point, and the right
operand for `"**"' must have a root type of `Standard.Integer'Base'.
You can use an intrinsic operator declaration as in the following
example:

        type Int1 is new Integer;
        type Int2 is new Integer;

        function "+" (X1 : Int1; X2 : Int2) return Int1;
        function "+" (X1 : Int1; X2 : Int2) return Int2;
        pragma Import (Intrinsic, "+");

This declaration would permit "mixed mode" arithmetic on items of the
differing types `Int1' and `Int2'.  It is also possible to specify such
operators for private types, if the full views are appropriate
arithmetic types.


File: gnat_rm.info,  Node: Enclosing_Entity,  Next: Exception_Information,  Prev: Intrinsic Operators,  Up: Intrinsic Subprograms

6.2 Enclosing_Entity
====================

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Source_Info'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Source_Info.Enclosing_Entity' to
obtain the name of the current subprogram, package, task, entry, or
protected subprogram.


File: gnat_rm.info,  Node: Exception_Information,  Next: Exception_Message,  Prev: Enclosing_Entity,  Up: Intrinsic Subprograms

6.3 Exception_Information
=========================

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Current_Exception'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function
`GNAT.Current_Exception.Exception_Information' to obtain the exception
information associated with the current exception.


File: gnat_rm.info,  Node: Exception_Message,  Next: Exception_Name,  Prev: Exception_Information,  Up: Intrinsic Subprograms

6.4 Exception_Message
=====================

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Current_Exception'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function
`GNAT.Current_Exception.Exception_Message' to obtain the message
associated with the current exception.


File: gnat_rm.info,  Node: Exception_Name,  Next: File,  Prev: Exception_Message,  Up: Intrinsic Subprograms

6.5 Exception_Name
==================

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Current_Exception'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Current_Exception.Exception_Name'
to obtain the name of the current exception.


File: gnat_rm.info,  Node: File,  Next: Line,  Prev: Exception_Name,  Up: Intrinsic Subprograms

6.6 File
========

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Source_Info'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Source_Info.File' to obtain the
name of the current file.


File: gnat_rm.info,  Node: Line,  Next: Shifts and Rotates,  Prev: File,  Up: Intrinsic Subprograms

6.7 Line
========

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Source_Info'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Source_Info.Line' to obtain the
number of the current source line.


File: gnat_rm.info,  Node: Shifts and Rotates,  Next: Source_Location,  Prev: Line,  Up: Intrinsic Subprograms

6.8 Shifts and Rotates
======================

In standard Ada, the shift and rotate functions are available only for
the predefined modular types in package `Interfaces'.  However, in GNAT
it is possible to define these functions for any integer type (signed
or modular), as in this example:

        function Shift_Left
          (Value  : T;
           Amount : Natural)
           return   T;

The function name must be one of Shift_Left, Shift_Right,
Shift_Right_Arithmetic, Rotate_Left, or Rotate_Right. T must be an
integer type. T'Size must be 8, 16, 32 or 64 bits; if T is modular, the
modulus must be 2**8, 2**16, 2**32 or 2**64.  The result type must be
the same as the type of `Value'.  The shift amount must be Natural.
The formal parameter names can be anything.


File: gnat_rm.info,  Node: Source_Location,  Prev: Shifts and Rotates,  Up: Intrinsic Subprograms

6.9 Source_Location
===================

This intrinsic subprogram is used in the implementation of the library
routine `GNAT.Source_Info'.  The only useful use of the intrinsic
import in this case is the one in this unit, so an application program
should simply call the function `GNAT.Source_Info.Source_Location' to
obtain the current source file location.


File: gnat_rm.info,  Node: Representation Clauses and Pragmas,  Next: Standard Library Routines,  Prev: Intrinsic Subprograms,  Up: Top

7 Representation Clauses and Pragmas
************************************

* Menu:

* Alignment Clauses::
* Size Clauses::
* Storage_Size Clauses::
* Size of Variant Record Objects::
* Biased Representation ::
* Value_Size and Object_Size Clauses::
* Component_Size Clauses::
* Bit_Order Clauses::
* Effect of Bit_Order on Byte Ordering::
* Pragma Pack for Arrays::
* Pragma Pack for Records::
* Record Representation Clauses::
* Enumeration Clauses::
* Address Clauses::
* Effect of Convention on Representation::
* Determining the Representations chosen by GNAT::

This section describes the representation clauses accepted by GNAT, and
their effect on the representation of corresponding data objects.

   GNAT fully implements Annex C (Systems Programming).  This means
that all the implementation advice sections in chapter 13 are fully
implemented.  However, these sections only require a minimal level of
support for representation clauses.  GNAT provides much more extensive
capabilities, and this section describes the additional capabilities
provided.


File: gnat_rm.info,  Node: Alignment Clauses,  Next: Size Clauses,  Up: Representation Clauses and Pragmas

7.1 Alignment Clauses
=====================

GNAT requires that all alignment clauses specify a power of 2, and all
default alignments are always a power of 2.  The default alignment
values are as follows:

   * _Primitive Types_.  For primitive types, the alignment is the
     minimum of the actual size of objects of the type divided by
     `Storage_Unit', and the maximum alignment supported by the target.
     (This maximum alignment is given by the GNAT-specific attribute
     `Standard'Maximum_Alignment'; see *Note Maximum_Alignment::.)  For
     example, for type `Long_Float', the object size is 8 bytes, and the
     default alignment will be 8 on any target that supports alignments
     this large, but on some targets, the maximum alignment may be
     smaller than 8, in which case objects of type `Long_Float' will be
     maximally aligned.

   * _Arrays_.  For arrays, the alignment is equal to the alignment of
     the component type for the normal case where no packing or
     component size is given.  If the array is packed, and the packing
     is effective (see separate section on packed arrays), then the
     alignment will be one for long packed arrays, or arrays whose
     length is not known at compile time.  For short packed arrays,
     which are handled internally as modular types, the alignment will
     be as described for primitive types, e.g. a packed array of length
     31 bits will have an object size of four bytes, and an alignment
     of 4.

   * _Records_.  For the normal non-packed case, the alignment of a
     record is equal to the maximum alignment of any of its components.
     For tagged records, this includes the implicit access type used
     for the tag.  If a pragma `Pack' is used and all components are
     packable (see separate section on pragma `Pack'), then the
     resulting alignment is 1, unless the layout of the record makes it
     profitable to increase it.

     A special case is when:
        * the size of the record is given explicitly, or a full record
          representation clause is given, and

        * the size of the record is 2, 4, or 8 bytes.
     In this case, an alignment is chosen to match the size of the
     record. For example, if we have:

             type Small is record
                A, B : Character;
             end record;
             for Small'Size use 16;

     then the default alignment of the record type `Small' is 2, not 1.
     This leads to more efficient code when the record is treated as a
     unit, and also allows the type to specified as `Atomic' on
     architectures requiring strict alignment.


An alignment clause may specify a larger alignment than the default
value up to some maximum value dependent on the target (obtainable by
using the attribute reference `Standard'Maximum_Alignment'). It may
also specify a smaller alignment than the default value for
enumeration, integer and fixed point types, as well as for record
types, for example

       type V is record
          A : Integer;
       end record;

       for V'alignment use 1;

The default alignment for the type `V' is 4, as a result of the Integer
field in the record, but it is permissible, as shown, to override the
default alignment of the record with a smaller value.


File: gnat_rm.info,  Node: Size Clauses,  Next: Storage_Size Clauses,  Prev: Alignment Clauses,  Up: Representation Clauses and Pragmas

7.2 Size Clauses
================

The default size for a type `T' is obtainable through the
language-defined attribute `T'Size' and also through the equivalent
GNAT-defined attribute `T'Value_Size'.  For objects of type `T', GNAT
will generally increase the type size so that the object size
(obtainable through the GNAT-defined attribute `T'Object_Size') is a
multiple of `T'Alignment * Storage_Unit'.  For example

        type Smallint is range 1 .. 6;

        type Rec is record
           Y1 : integer;
           Y2 : boolean;
        end record;

In this example, `Smallint'Size' = `Smallint'Value_Size' = 3, as
specified by the RM rules, but objects of this type will have a size of
8 (`Smallint'Object_Size' = 8), since objects by default occupy an
integral number of storage units.  On some targets, notably older
versions of the Digital Alpha, the size of stand alone objects of this
type may be 32, reflecting the inability of the hardware to do byte
load/stores.

   Similarly, the size of type `Rec' is 40 bits (`Rec'Size' =
`Rec'Value_Size' = 40), but the alignment is 4, so objects of this type
will have their size increased to 64 bits so that it is a multiple of
the alignment (in bits).  This decision is in accordance with the
specific Implementation Advice in RM 13.3(43):

     A `Size' clause should be supported for an object if the specified
     `Size' is at least as large as its subtype's `Size', and
     corresponds to a size in storage elements that is a multiple of
     the object's `Alignment' (if the `Alignment' is nonzero).

An explicit size clause may be used to override the default size by
increasing it.  For example, if we have:

        type My_Boolean is new Boolean;
        for My_Boolean'Size use 32;

then values of this type will always be 32 bits long.  In the case of
discrete types, the size can be increased up to 64 bits, with the effect
that the entire specified field is used to hold the value, sign- or
zero-extended as appropriate.  If more than 64 bits is specified, then
padding space is allocated after the value, and a warning is issued that
there are unused bits.

   Similarly the size of records and arrays may be increased, and the
effect is to add padding bits after the value.  This also causes a
warning message to be generated.

   The largest Size value permitted in GNAT is 2**31-1.  Since this is a
Size in bits, this corresponds to an object of size 256 megabytes (minus
one).  This limitation is true on all targets.  The reason for this
limitation is that it improves the quality of the code in many cases if
it is known that a Size value can be accommodated in an object of type
Integer.


File: gnat_rm.info,  Node: Storage_Size Clauses,  Next: Size of Variant Record Objects,  Prev: Size Clauses,  Up: Representation Clauses and Pragmas

7.3 Storage_Size Clauses
========================

For tasks, the `Storage_Size' clause specifies the amount of space to
be allocated for the task stack.  This cannot be extended, and if the
stack is exhausted, then `Storage_Error' will be raised (if stack
checking is enabled).  Use a `Storage_Size' attribute definition clause,
or a `Storage_Size' pragma in the task definition to set the
appropriate required size.  A useful technique is to include in every
task definition a pragma of the form:

        pragma Storage_Size (Default_Stack_Size);

Then `Default_Stack_Size' can be defined in a global package, and
modified as required. Any tasks requiring stack sizes different from the
default can have an appropriate alternative reference in the pragma.

   You can also use the `-d' binder switch to modify the default stack
size.

   For access types, the `Storage_Size' clause specifies the maximum
space available for allocation of objects of the type.  If this space is
exceeded then `Storage_Error' will be raised by an allocation attempt.
In the case where the access type is declared local to a subprogram, the
use of a `Storage_Size' clause triggers automatic use of a special
predefined storage pool (`System.Pool_Size') that ensures that all
space for the pool is automatically reclaimed on exit from the scope in
which the type is declared.

   A special case recognized by the compiler is the specification of a
`Storage_Size' of zero for an access type.  This means that no items
can be allocated from the pool, and this is recognized at compile time,
and all the overhead normally associated with maintaining a fixed size
storage pool is eliminated.  Consider the following example:

        procedure p is
           type R is array (Natural) of Character;
           type P is access all R;
           for P'Storage_Size use 0;
           --  Above access type intended only for interfacing purposes

           y : P;

           procedure g (m : P);
           pragma Import (C, g);

           --  ...

        begin
           --  ...
           y := new R;
        end;

As indicated in this example, these dummy storage pools are often
useful in connection with interfacing where no object will ever be
allocated.  If you compile the above example, you get the warning:

        p.adb:16:09: warning: allocation from empty storage pool
        p.adb:16:09: warning: Storage_Error will be raised at run time

Of course in practice, there will not be any explicit allocators in the
case of such an access declaration.


File: gnat_rm.info,  Node: Size of Variant Record Objects,  Next: Biased Representation,  Prev: Storage_Size Clauses,  Up: Representation Clauses and Pragmas

7.4 Size of Variant Record Objects
==================================

In the case of variant record objects, there is a question whether Size
gives information about a particular variant, or the maximum size
required for any variant.  Consider the following program

     with Text_IO; use Text_IO;
     procedure q is
        type R1 (A : Boolean := False) is record
          case A is
            when True  => X : Character;
            when False => null;
          end case;
        end record;

        V1 : R1 (False);
        V2 : R1;

     begin
        Put_Line (Integer'Image (V1'Size));
        Put_Line (Integer'Image (V2'Size));
     end q;

Here we are dealing with a variant record, where the True variant
requires 16 bits, and the False variant requires 8 bits.  In the above
example, both V1 and V2 contain the False variant, which is only 8 bits
long.  However, the result of running the program is:

     8
     16

The reason for the difference here is that the discriminant value of V1
is fixed, and will always be False.  It is not possible to assign a
True variant value to V1, therefore 8 bits is sufficient.  On the other
hand, in the case of V2, the initial discriminant value is False (from
the default), but it is possible to assign a True variant value to V2,
therefore 16 bits must be allocated for V2 in the general case, even
fewer bits may be needed at any particular point during the program
execution.

   As can be seen from the output of this program, the `'Size'
attribute applied to such an object in GNAT gives the actual allocated
size of the variable, which is the largest size of any of the variants.
The Ada Reference Manual is not completely clear on what choice should
be made here, but the GNAT behavior seems most consistent with the
language in the RM.

   In some cases, it may be desirable to obtain the size of the current
variant, rather than the size of the largest variant.  This can be
achieved in GNAT by making use of the fact that in the case of a
subprogram parameter, GNAT does indeed return the size of the current
variant (because a subprogram has no way of knowing how much space is
actually allocated for the actual).

   Consider the following modified version of the above program:

     with Text_IO; use Text_IO;
     procedure q is
        type R1 (A : Boolean := False) is record
          case A is
            when True  => X : Character;
            when False => null;
          end case;
        end record;

        V2 : R1;

        function Size (V : R1) return Integer is
        begin
           return V'Size;
        end Size;

     begin
        Put_Line (Integer'Image (V2'Size));
        Put_Line (Integer'IMage (Size (V2)));
        V2 := (True, 'x');
        Put_Line (Integer'Image (V2'Size));
        Put_Line (Integer'IMage (Size (V2)));
     end q;

The output from this program is

     16
     8
     16
     16

Here we see that while the `'Size' attribute always returns the maximum
size, regardless of the current variant value, the `Size' function does
indeed return the size of the current variant value.


File: gnat_rm.info,  Node: Biased Representation,  Next: Value_Size and Object_Size Clauses,  Prev: Size of Variant Record Objects,  Up: Representation Clauses and Pragmas

7.5 Biased Representation
=========================

In the case of scalars with a range starting at other than zero, it is
possible in some cases to specify a size smaller than the default
minimum value, and in such cases, GNAT uses an unsigned biased
representation, in which zero is used to represent the lower bound, and
successive values represent successive values of the type.

   For example, suppose we have the declaration:

        type Small is range -7 .. -4;
        for Small'Size use 2;

Although the default size of type `Small' is 4, the `Size' clause is
accepted by GNAT and results in the following representation scheme:

       -7 is represented as 2#00#
       -6 is represented as 2#01#
       -5 is represented as 2#10#
       -4 is represented as 2#11#

Biased representation is only used if the specified `Size' clause
cannot be accepted in any other manner.  These reduced sizes that force
biased representation can be used for all discrete types except for
enumeration types for which a representation clause is given.


File: gnat_rm.info,  Node: Value_Size and Object_Size Clauses,  Next: Component_Size Clauses,  Prev: Biased Representation,  Up: Representation Clauses and Pragmas

7.6 Value_Size and Object_Size Clauses
======================================

In Ada 95 and Ada 2005, `T'Size' for a type `T' is the minimum number
of bits required to hold values of type `T'.  Although this
interpretation was allowed in Ada 83, it was not required, and this
requirement in practice can cause some significant difficulties.  For
example, in most Ada 83 compilers, `Natural'Size' was 32.  However, in
Ada 95 and Ada 2005, `Natural'Size' is typically 31.  This means that
code may change in behavior when moving from Ada 83 to Ada 95 or Ada
2005.  For example, consider:

        type Rec is record;
           A : Natural;
           B : Natural;
        end record;

        for Rec use record
           at 0  range 0 .. Natural'Size - 1;
           at 0  range Natural'Size .. 2 * Natural'Size - 1;
        end record;

In the above code, since the typical size of `Natural' objects is 32
bits and `Natural'Size' is 31, the above code can cause unexpected
inefficient packing in Ada 95 and Ada 2005, and in general there are
cases where the fact that the object size can exceed the size of the
type causes surprises.

   To help get around this problem GNAT provides two implementation
defined attributes, `Value_Size' and `Object_Size'.  When applied to a
type, these attributes yield the size of the type (corresponding to the
RM defined size attribute), and the size of objects of the type
respectively.

   The `Object_Size' is used for determining the default size of
objects and components.  This size value can be referred to using the
`Object_Size' attribute.  The phrase "is used" here means that it is
the basis of the determination of the size.  The backend is free to pad
this up if necessary for efficiency, e.g. an 8-bit stand-alone
character might be stored in 32 bits on a machine with no efficient
byte access instructions such as the Alpha.

   The default rules for the value of `Object_Size' for discrete types
are as follows:

   * The `Object_Size' for base subtypes reflect the natural hardware
     size in bits (run the compiler with `-gnatS' to find those values
     for numeric types). Enumeration types and fixed-point base
     subtypes have 8, 16, 32 or 64 bits for this size, depending on the
     range of values to be stored.

   * The `Object_Size' of a subtype is the same as the `Object_Size' of
     the type from which it is obtained.

   * The `Object_Size' of a derived base type is copied from the parent
     base type, and the `Object_Size' of a derived first subtype is
     copied from the parent first subtype.

The `Value_Size' attribute is the (minimum) number of bits required to
store a value of the type.  This value is used to determine how tightly
to pack records or arrays with components of this type, and also affects
the semantics of unchecked conversion (unchecked conversions where the
`Value_Size' values differ generate a warning, and are potentially
target dependent).

   The default rules for the value of `Value_Size' are as follows:

   * The `Value_Size' for a base subtype is the minimum number of bits
     required to store all values of the type (including the sign bit
     only if negative values are possible).

   * If a subtype statically matches the first subtype of a given type,
     then it has by default the same `Value_Size' as the first subtype.
     This is a consequence of RM 13.1(14) ("if two subtypes statically
     match, then their subtype-specific aspects are the same".)

   * All other subtypes have a `Value_Size' corresponding to the minimum
     number of bits required to store all values of the subtype.  For
     dynamic bounds, it is assumed that the value can range down or up
     to the corresponding bound of the ancestor

The RM defined attribute `Size' corresponds to the `Value_Size'
attribute.

   The `Size' attribute may be defined for a first-named subtype.  This
sets the `Value_Size' of the first-named subtype to the given value,
and the `Object_Size' of this first-named subtype to the given value
padded up to an appropriate boundary.  It is a consequence of the
default rules above that this `Object_Size' will apply to all further
subtypes.  On the other hand, `Value_Size' is affected only for the
first subtype, any dynamic subtypes obtained from it directly, and any
statically matching subtypes.  The `Value_Size' of any other static
subtypes is not affected.

   `Value_Size' and `Object_Size' may be explicitly set for any subtype
using an attribute definition clause.  Note that the use of these
attributes can cause the RM 13.1(14) rule to be violated.  If two
access types reference aliased objects whose subtypes have differing
`Object_Size' values as a result of explicit attribute definition
clauses, then it is erroneous to convert from one access subtype to the
other.

   At the implementation level, Esize stores the Object_Size and the
RM_Size field stores the `Value_Size' (and hence the value of the
`Size' attribute, which, as noted above, is equivalent to `Value_Size').

   To get a feel for the difference, consider the following examples
(note that in each case the base is `Short_Short_Integer' with a size
of 8):

                                            Object_Size     Value_Size

     type x1 is range 0 .. 5;                    8               3

     type x2 is range 0 .. 5;
     for x2'size use 12;                        16              12

     subtype x3 is x2 range 0 .. 3;             16               2

     subtype x4 is x2'base range 0 .. 10;        8               4

     subtype x5 is x2 range 0 .. dynamic;       16               3*

     subtype x6 is x2'base range 0 .. dynamic;   8               3*

Note: the entries marked "3*" are not actually specified by the Ada
Reference Manual, but it seems in the spirit of the RM rules to allocate
the minimum number of bits (here 3, given the range for `x2') known to
be large enough to hold the given range of values.

   So far, so good, but GNAT has to obey the RM rules, so the question
is under what conditions must the RM `Size' be used.  The following is
a list of the occasions on which the RM `Size' must be used:

   * Component size for packed arrays or records

   * Value of the attribute `Size' for a type

   * Warning about sizes not matching for unchecked conversion

For record types, the `Object_Size' is always a multiple of the
alignment of the type (this is true for all types). In some cases the
`Value_Size' can be smaller. Consider:

        type R is record
          X : Integer;
          Y : Character;
        end record;

On a typical 32-bit architecture, the X component will be four bytes,
and require four-byte alignment, and the Y component will be one byte.
In this case `R'Value_Size' will be 40 (bits) since this is the minimum
size required to store a value of this type, and for example, it is
permissible to have a component of type R in an outer array whose
component size is specified to be 48 bits. However, `R'Object_Size'
will be 64 (bits), since it must be rounded up so that this value is a
multiple of the alignment (4 bytes = 32 bits).

For all other types, the `Object_Size' and Value_Size are the same (and
equivalent to the RM attribute `Size').  Only `Size' may be specified
for such types.


File: gnat_rm.info,  Node: Component_Size Clauses,  Next: Bit_Order Clauses,  Prev: Value_Size and Object_Size Clauses,  Up: Representation Clauses and Pragmas

7.7 Component_Size Clauses
==========================

Normally, the value specified in a component size clause must be
consistent with the subtype of the array component with regard to size
and alignment.  In other words, the value specified must be at least
equal to the size of this subtype, and must be a multiple of the
alignment value.

   In addition, component size clauses are allowed which cause the array
to be packed, by specifying a smaller value.  A first case is for
component size values in the range 1 through 63.  The value specified
must not be smaller than the Size of the subtype.  GNAT will accurately
honor all packing requests in this range.  For example, if we have:

     type r is array (1 .. 8) of Natural;
     for r'Component_Size use 31;

then the resulting array has a length of 31 bytes (248 bits = 8 * 31).
Of course access to the components of such an array is considerably
less efficient than if the natural component size of 32 is used.  A
second case is when the subtype of the component is a record type
padded because of its default alignment.  For example, if we have:

     type r is record
       i : Integer;
       j : Integer;
       b : Boolean;
     end record;

     type a is array (1 .. 8) of r;
     for a'Component_Size use 72;

then the resulting array has a length of 72 bytes, instead of 96 bytes
if the alignment of the record (4) was obeyed.

   Note that there is no point in giving both a component size clause
and a pragma Pack for the same array type. if such duplicate clauses
are given, the pragma Pack will be ignored.


File: gnat_rm.info,  Node: Bit_Order Clauses,  Next: Effect of Bit_Order on Byte Ordering,  Prev: Component_Size Clauses,  Up: Representation Clauses and Pragmas

7.8 Bit_Order Clauses
=====================

For record subtypes, GNAT permits the specification of the `Bit_Order'
attribute.  The specification may either correspond to the default bit
order for the target, in which case the specification has no effect and
places no additional restrictions, or it may be for the non-standard
setting (that is the opposite of the default).

   In the case where the non-standard value is specified, the effect is
to renumber bits within each byte, but the ordering of bytes is not
affected.  There are certain restrictions placed on component clauses
as follows:

   * Components fitting within a single storage unit.  These are
     unrestricted, and the effect is merely to renumber bits.  For
     example if we are on a little-endian machine with `Low_Order_First'
     being the default, then the following two declarations have exactly
     the same effect:

             type R1 is record
                A : Boolean;
                B : Integer range 1 .. 120;
             end record;

             for R1 use record
                A at 0 range 0 .. 0;
                B at 0 range 1 .. 7;
             end record;

             type R2 is record
                A : Boolean;
                B : Integer range 1 .. 120;
             end record;

             for R2'Bit_Order use High_Order_First;

             for R2 use record
                A at 0 range 7 .. 7;
                B at 0 range 0 .. 6;
             end record;

     The useful application here is to write the second declaration
     with the `Bit_Order' attribute definition clause, and know that it
     will be treated the same, regardless of whether the target is
     little-endian or big-endian.

   * Components occupying an integral number of bytes.  These are
     components that exactly fit in two or more bytes.  Such component
     declarations are allowed, but have no effect, since it is
     important to realize that the `Bit_Order' specification does not
     affect the ordering of bytes.  In particular, the following
     attempt at getting an endian-independent integer does not work:

             type R2 is record
                A : Integer;
             end record;

             for R2'Bit_Order use High_Order_First;

             for R2 use record
                A at 0 range 0 .. 31;
             end record;

     This declaration will result in a little-endian integer on a
     little-endian machine, and a big-endian integer on a big-endian
     machine.  If byte flipping is required for interoperability
     between big- and little-endian machines, this must be explicitly
     programmed.  This capability is not provided by `Bit_Order'.

   * Components that are positioned across byte boundaries but do not
     occupy an integral number of bytes.  Given that bytes are not
     reordered, such fields would occupy a non-contiguous sequence of
     bits in memory, requiring non-trivial code to reassemble.  They
     are for this reason not permitted, and any component clause
     specifying such a layout will be flagged as illegal by GNAT.


Since the misconception that Bit_Order automatically deals with all
endian-related incompatibilities is a common one, the specification of
a component field that is an integral number of bytes will always
generate a warning.  This warning may be suppressed using `pragma
Warnings (Off)' if desired.  The following section contains additional
details regarding the issue of byte ordering.


File: gnat_rm.info,  Node: Effect of Bit_Order on Byte Ordering,  Next: Pragma Pack for Arrays,  Prev: Bit_Order Clauses,  Up: Representation Clauses and Pragmas

7.9 Effect of Bit_Order on Byte Ordering
========================================

In this section we will review the effect of the `Bit_Order' attribute
definition clause on byte ordering.  Briefly, it has no effect at all,
but a detailed example will be helpful.  Before giving this example,
let us review the precise definition of the effect of defining
`Bit_Order'.  The effect of a non-standard bit order is described in
section 15.5.3 of the Ada Reference Manual:

     2   A bit ordering is a method of interpreting the meaning of the
     storage place attributes.

To understand the precise definition of storage place attributes in
this context, we visit section 13.5.1 of the manual:

     13   A record_representation_clause (without the mod_clause)
     specifies the layout.  The storage place attributes (see 13.5.2)
     are taken from the values of the position, first_bit, and last_bit
     expressions after normalizing those values so that first_bit is
     less than Storage_Unit.

The critical point here is that storage places are taken from the
values after normalization, not before.  So the `Bit_Order'
interpretation applies to normalized values.  The interpretation is
described in the later part of the 15.5.3 paragraph:

     2   A bit ordering is a method of interpreting the meaning of the
     storage place attributes.  High_Order_First (known in the
     vernacular as "big endian") means that the first bit of a storage
     element (bit 0) is the most significant bit (interpreting the
     sequence of bits that represent a component as an unsigned integer
     value).  Low_Order_First (known in the vernacular as "little
     endian") means the opposite: the first bit is the least
     significant.

Note that the numbering is with respect to the bits of a storage unit.
In other words, the specification affects only the numbering of bits
within a single storage unit.

   We can make the effect clearer by giving an example.

   Suppose that we have an external device which presents two bytes,
the first byte presented, which is the first (low addressed byte) of
the two byte record is called Master, and the second byte is called
Slave.

   The left most (most significant bit is called Control for each byte,
and the remaining 7 bits are called V1, V2, ... V7, where V7 is the
rightmost (least significant) bit.

   On a big-endian machine, we can write the following representation
clause

        type Data is record
           Master_Control : Bit;
           Master_V1      : Bit;
           Master_V2      : Bit;
           Master_V3      : Bit;
           Master_V4      : Bit;
           Master_V5      : Bit;
           Master_V6      : Bit;
           Master_V7      : Bit;
           Slave_Control  : Bit;
           Slave_V1       : Bit;
           Slave_V2       : Bit;
           Slave_V3       : Bit;
           Slave_V4       : Bit;
           Slave_V5       : Bit;
           Slave_V6       : Bit;
           Slave_V7       : Bit;
        end record;

        for Data use record
           Master_Control at 0 range 0 .. 0;
           Master_V1      at 0 range 1 .. 1;
           Master_V2      at 0 range 2 .. 2;
           Master_V3      at 0 range 3 .. 3;
           Master_V4      at 0 range 4 .. 4;
           Master_V5      at 0 range 5 .. 5;
           Master_V6      at 0 range 6 .. 6;
           Master_V7      at 0 range 7 .. 7;
           Slave_Control  at 1 range 0 .. 0;
           Slave_V1       at 1 range 1 .. 1;
           Slave_V2       at 1 range 2 .. 2;
           Slave_V3       at 1 range 3 .. 3;
           Slave_V4       at 1 range 4 .. 4;
           Slave_V5       at 1 range 5 .. 5;
           Slave_V6       at 1 range 6 .. 6;
           Slave_V7       at 1 range 7 .. 7;
        end record;

Now if we move this to a little endian machine, then the bit ordering
within the byte is backwards, so we have to rewrite the record rep
clause as:

        for Data use record
           Master_Control at 0 range 7 .. 7;
           Master_V1      at 0 range 6 .. 6;
           Master_V2      at 0 range 5 .. 5;
           Master_V3      at 0 range 4 .. 4;
           Master_V4      at 0 range 3 .. 3;
           Master_V5      at 0 range 2 .. 2;
           Master_V6      at 0 range 1 .. 1;
           Master_V7      at 0 range 0 .. 0;
           Slave_Control  at 1 range 7 .. 7;
           Slave_V1       at 1 range 6 .. 6;
           Slave_V2       at 1 range 5 .. 5;
           Slave_V3       at 1 range 4 .. 4;
           Slave_V4       at 1 range 3 .. 3;
           Slave_V5       at 1 range 2 .. 2;
           Slave_V6       at 1 range 1 .. 1;
           Slave_V7       at 1 range 0 .. 0;
        end record;

It is a nuisance to have to rewrite the clause, especially if the code
has to be maintained on both machines.  However, this is a case that we
can handle with the `Bit_Order' attribute if it is implemented.  Note
that the implementation is not required on byte addressed machines, but
it is indeed implemented in GNAT.  This means that we can simply use the
first record clause, together with the declaration

        for Data'Bit_Order use High_Order_First;

and the effect is what is desired, namely the layout is exactly the
same, independent of whether the code is compiled on a big-endian or
little-endian machine.

   The important point to understand is that byte ordering is not
affected.  A `Bit_Order' attribute definition never affects which byte
a field ends up in, only where it ends up in that byte.  To make this
clear, let us rewrite the record rep clause of the previous example as:

        for Data'Bit_Order use High_Order_First;
        for Data use record
           Master_Control at 0 range  0 .. 0;
           Master_V1      at 0 range  1 .. 1;
           Master_V2      at 0 range  2 .. 2;
           Master_V3      at 0 range  3 .. 3;
           Master_V4      at 0 range  4 .. 4;
           Master_V5      at 0 range  5 .. 5;
           Master_V6      at 0 range  6 .. 6;
           Master_V7      at 0 range  7 .. 7;
           Slave_Control  at 0 range  8 .. 8;
           Slave_V1       at 0 range  9 .. 9;
           Slave_V2       at 0 range 10 .. 10;
           Slave_V3       at 0 range 11 .. 11;
           Slave_V4       at 0 range 12 .. 12;
           Slave_V5       at 0 range 13 .. 13;
           Slave_V6       at 0 range 14 .. 14;
           Slave_V7       at 0 range 15 .. 15;
        end record;

This is exactly equivalent to saying (a repeat of the first example):

        for Data'Bit_Order use High_Order_First;
        for Data use record
           Master_Control at 0 range 0 .. 0;
           Master_V1      at 0 range 1 .. 1;
           Master_V2      at 0 range 2 .. 2;
           Master_V3      at 0 range 3 .. 3;
           Master_V4      at 0 range 4 .. 4;
           Master_V5      at 0 range 5 .. 5;
           Master_V6      at 0 range 6 .. 6;
           Master_V7      at 0 range 7 .. 7;
           Slave_Control  at 1 range 0 .. 0;
           Slave_V1       at 1 range 1 .. 1;
           Slave_V2       at 1 range 2 .. 2;
           Slave_V3       at 1 range 3 .. 3;
           Slave_V4       at 1 range 4 .. 4;
           Slave_V5       at 1 range 5 .. 5;
           Slave_V6       at 1 range 6 .. 6;
           Slave_V7       at 1 range 7 .. 7;
        end record;

Why are they equivalent? Well take a specific field, the `Slave_V2'
field.  The storage place attributes are obtained by normalizing the
values given so that the `First_Bit' value is less than 8.  After
normalizing the values (0,10,10) we get (1,2,2) which is exactly what
we specified in the other case.

   Now one might expect that the `Bit_Order' attribute might affect bit
numbering within the entire record component (two bytes in this case,
thus affecting which byte fields end up in), but that is not the way
this feature is defined, it only affects numbering of bits, not which
byte they end up in.

   Consequently it never makes sense to specify a starting bit number
greater than 7 (for a byte addressable field) if an attribute
definition for `Bit_Order' has been given, and indeed it may be
actively confusing to specify such a value, so the compiler generates a
warning for such usage.

   If you do need to control byte ordering then appropriate conditional
values must be used.  If in our example, the slave byte came first on
some machines we might write:

        Master_Byte_First constant Boolean := ...;

        Master_Byte : constant Natural :=
                        1 - Boolean'Pos (Master_Byte_First);
        Slave_Byte  : constant Natural :=
                        Boolean'Pos (Master_Byte_First);

        for Data'Bit_Order use High_Order_First;
        for Data use record
           Master_Control at Master_Byte range 0 .. 0;
           Master_V1      at Master_Byte range 1 .. 1;
           Master_V2      at Master_Byte range 2 .. 2;
           Master_V3      at Master_Byte range 3 .. 3;
           Master_V4      at Master_Byte range 4 .. 4;
           Master_V5      at Master_Byte range 5 .. 5;
           Master_V6      at Master_Byte range 6 .. 6;
           Master_V7      at Master_Byte range 7 .. 7;
           Slave_Control  at Slave_Byte  range 0 .. 0;
           Slave_V1       at Slave_Byte  range 1 .. 1;
           Slave_V2       at Slave_Byte  range 2 .. 2;
           Slave_V3       at Slave_Byte  range 3 .. 3;
           Slave_V4       at Slave_Byte  range 4 .. 4;
           Slave_V5       at Slave_Byte  range 5 .. 5;
           Slave_V6       at Slave_Byte  range 6 .. 6;
           Slave_V7       at Slave_Byte  range 7 .. 7;
        end record;

Now to switch between machines, all that is necessary is to set the
boolean constant `Master_Byte_First' in an appropriate manner.


File: gnat_rm.info,  Node: Pragma Pack for Arrays,  Next: Pragma Pack for Records,  Prev: Effect of Bit_Order on Byte Ordering,  Up: Representation Clauses and Pragmas

7.10 Pragma Pack for Arrays
===========================

Pragma `Pack' applied to an array has no effect unless the component
type is packable.  For a component type to be packable, it must be one
of the following cases:

   * Any scalar type

   * Any type whose size is specified with a size clause

   * Any packed array type with a static size

   * Any record type padded because of its default alignment

For all these cases, if the component subtype size is in the range 1
through 63, then the effect of the pragma `Pack' is exactly as though a
component size were specified giving the component subtype size.  For
example if we have:

        type r is range 0 .. 17;

        type ar is array (1 .. 8) of r;
        pragma Pack (ar);

Then the component size of `ar' will be set to 5 (i.e. to `r'size', and
the size of the array `ar' will be exactly 40 bits.

   Note that in some cases this rather fierce approach to packing can
produce unexpected effects.  For example, in Ada 95 and Ada 2005,
subtype `Natural' typically has a size of 31, meaning that if you pack
an array of `Natural', you get 31-bit close packing, which saves a few
bits, but results in far less efficient access.  Since many other Ada
compilers will ignore such a packing request, GNAT will generate a
warning on some uses of pragma `Pack' that it guesses might not be what
is intended.  You can easily remove this warning by using an explicit
`Component_Size' setting instead, which never generates a warning,
since the intention of the programmer is clear in this case.

   GNAT treats packed arrays in one of two ways.  If the size of the
array is known at compile time and is less than 64 bits, then
internally the array is represented as a single modular type, of
exactly the appropriate number of bits.  If the length is greater than
63 bits, or is not known at compile time, then the packed array is
represented as an array of bytes, and the length is always a multiple
of 8 bits.

   Note that to represent a packed array as a modular type, the
alignment must be suitable for the modular type involved. For example,
on typical machines a 32-bit packed array will be represented by a
32-bit modular integer with an alignment of four bytes. If you
explicitly override the default alignment with an alignment clause that
is too small, the modular representation cannot be used. For example,
consider the following set of declarations:

        type R is range 1 .. 3;
        type S is array (1 .. 31) of R;
        for S'Component_Size use 2;
        for S'Size use 62;
        for S'Alignment use 1;

If the alignment clause were not present, then a 62-bit modular
representation would be chosen (typically with an alignment of 4 or 8
bytes depending on the target). But the default alignment is overridden
with the explicit alignment clause. This means that the modular
representation cannot be used, and instead the array of bytes
representation must be used, meaning that the length must be a multiple
of 8. Thus the above set of declarations will result in a diagnostic
rejecting the size clause and noting that the minimum size allowed is
64.

   One special case that is worth noting occurs when the base type of
the component size is 8/16/32 and the subtype is one bit less. Notably
this occurs with subtype `Natural'. Consider:

        type Arr is array (1 .. 32) of Natural;
        pragma Pack (Arr);

In all commonly used Ada 83 compilers, this pragma Pack would be
ignored, since typically `Natural'Size' is 32 in Ada 83, and in any
case most Ada 83 compilers did not attempt 31 bit packing.

   In Ada 95 and Ada 2005, `Natural'Size' is required to be 31.
Furthermore, GNAT really does pack 31-bit subtype to 31 bits. This may
result in a substantial unintended performance penalty when porting
legacy Ada 83 code.  To help prevent this, GNAT generates a warning in
such cases. If you really want 31 bit packing in a case like this, you
can set the component size explicitly:

        type Arr is array (1 .. 32) of Natural;
        for Arr'Component_Size use 31;

Here 31-bit packing is achieved as required, and no warning is
generated, since in this case the programmer intention is clear.


File: gnat_rm.info,  Node: Pragma Pack for Records,  Next: Record Representation Clauses,  Prev: Pragma Pack for Arrays,  Up: Representation Clauses and Pragmas

7.11 Pragma Pack for Records
============================

Pragma `Pack' applied to a record will pack the components to reduce
wasted space from alignment gaps and by reducing the amount of space
taken by components.  We distinguish between _packable_ components and
_non-packable_ components.  Components of the following types are
considered packable:
   * All primitive types are packable.

   * Small packed arrays, whose size does not exceed 64 bits, and where
     the size is statically known at compile time, are represented
     internally as modular integers, and so they are also packable.


All packable components occupy the exact number of bits corresponding to
their `Size' value, and are packed with no padding bits, i.e. they can
start on an arbitrary bit boundary.

   All other types are non-packable, they occupy an integral number of
storage units, and are placed at a boundary corresponding to their
alignment requirements.

   For example, consider the record

        type Rb1 is array (1 .. 13) of Boolean;
        pragma Pack (rb1);

        type Rb2 is array (1 .. 65) of Boolean;
        pragma Pack (rb2);

        type x2 is record
           l1 : Boolean;
           l2 : Duration;
           l3 : Float;
           l4 : Boolean;
           l5 : Rb1;
           l6 : Rb2;
        end record;
        pragma Pack (x2);

The representation for the record x2 is as follows:

     for x2'Size use 224;
     for x2 use record
        l1 at  0 range  0 .. 0;
        l2 at  0 range  1 .. 64;
        l3 at 12 range  0 .. 31;
        l4 at 16 range  0 .. 0;
        l5 at 16 range  1 .. 13;
        l6 at 18 range  0 .. 71;
     end record;

Studying this example, we see that the packable fields `l1' and `l2' are
of length equal to their sizes, and placed at specific bit boundaries
(and not byte boundaries) to eliminate padding.  But `l3' is of a
non-packable float type, so it is on the next appropriate alignment
boundary.

   The next two fields are fully packable, so `l4' and `l5' are
minimally packed with no gaps.  However, type `Rb2' is a packed array
that is longer than 64 bits, so it is itself non-packable.  Thus the
`l6' field is aligned to the next byte boundary, and takes an integral
number of bytes, i.e. 72 bits.


File: gnat_rm.info,  Node: Record Representation Clauses,  Next: Enumeration Clauses,  Prev: Pragma Pack for Records,  Up: Representation Clauses and Pragmas

7.12 Record Representation Clauses
==================================

Record representation clauses may be given for all record types,
including types obtained by record extension.  Component clauses are
allowed for any static component.  The restrictions on component
clauses depend on the type of the component.

   For all components of an elementary type, the only restriction on
component clauses is that the size must be at least the 'Size value of
the type (actually the Value_Size).  There are no restrictions due to
alignment, and such components may freely cross storage boundaries.

   Packed arrays with a size up to and including 64 bits are represented
internally using a modular type with the appropriate number of bits, and
thus the same lack of restriction applies.  For example, if you declare:

        type R is array (1 .. 49) of Boolean;
        pragma Pack (R);
        for R'Size use 49;

then a component clause for a component of type R may start on any
specified bit boundary, and may specify a value of 49 bits or greater.

   For packed bit arrays that are longer than 64 bits, there are two
cases. If the component size is a power of 2 (1,2,4,8,16,32 bits),
including the important case of single bits or boolean values, then
there are no limitations on placement of such components, and they may
start and end at arbitrary bit boundaries.

   If the component size is not a power of 2 (e.g. 3 or 5), then an
array of this type longer than 64 bits must always be placed on on a
storage unit (byte) boundary and occupy an integral number of storage
units (bytes). Any component clause that does not meet this requirement
will be rejected.

   Any aliased component, or component of an aliased type, must have
its normal alignment and size. A component clause that does not meet
this requirement will be rejected.

   The tag field of a tagged type always occupies an address sized
field at the start of the record.  No component clause may attempt to
overlay this tag. When a tagged type appears as a component, the tag
field must have proper alignment

   In the case of a record extension T1, of a type T, no component
clause applied to the type T1 can specify a storage location that would
overlap the first T'Size bytes of the record.

   For all other component types, including non-bit-packed arrays, the
component can be placed at an arbitrary bit boundary, so for example,
the following is permitted:

        type R is array (1 .. 10) of Boolean;
        for R'Size use 80;

        type Q is record
           G, H : Boolean;
           L, M : R;
        end record;

        for Q use record
           G at 0 range  0 ..   0;
           H at 0 range  1 ..   1;
           L at 0 range  2 ..  81;
           R at 0 range 82 .. 161;
        end record;

Note: the above rules apply to recent releases of GNAT 5.  In GNAT 3,
there are more severe restrictions on larger components.  For
non-primitive types, including packed arrays with a size greater than
64 bits, component clauses must respect the alignment requirement of the
type, in particular, always starting on a byte boundary, and the length
must be a multiple of the storage unit.


File: gnat_rm.info,  Node: Enumeration Clauses,  Next: Address Clauses,  Prev: Record Representation Clauses,  Up: Representation Clauses and Pragmas

7.13 Enumeration Clauses
========================

The only restriction on enumeration clauses is that the range of values
must be representable.  For the signed case, if one or more of the
representation values are negative, all values must be in the range:

        System.Min_Int .. System.Max_Int

For the unsigned case, where all values are nonnegative, the values must
be in the range:

        0 .. System.Max_Binary_Modulus;

A _confirming_ representation clause is one in which the values range
from 0 in sequence, i.e. a clause that confirms the default
representation for an enumeration type.  Such a confirming
representation is permitted by these rules, and is specially recognized
by the compiler so that no extra overhead results from the use of such
a clause.

   If an array has an index type which is an enumeration type to which
an enumeration clause has been applied, then the array is stored in a
compact manner.  Consider the declarations:

        type r is (A, B, C);
        for r use (A => 1, B => 5, C => 10);
        type t is array (r) of Character;

The array type t corresponds to a vector with exactly three elements and
has a default size equal to `3*Character'Size'.  This ensures efficient
use of space, but means that accesses to elements of the array will
incur the overhead of converting representation values to the
corresponding positional values, (i.e. the value delivered by the `Pos'
attribute).


File: gnat_rm.info,  Node: Address Clauses,  Next: Effect of Convention on Representation,  Prev: Enumeration Clauses,  Up: Representation Clauses and Pragmas

7.14 Address Clauses
====================

The reference manual allows a general restriction on representation
clauses, as found in RM 13.1(22):

     An implementation need not support representation items containing
     nonstatic expressions, except that an implementation should
     support a representation item for a given entity if each nonstatic
     expression in the representation item is a name that statically
     denotes a constant declared before the entity.

In practice this is applicable only to address clauses, since this is
the only case in which a non-static expression is permitted by the
syntax.  As the AARM notes in sections 13.1 (22.a-22.h):

       22.a   Reason: This is to avoid the following sort of thing:

       22.b        X : Integer := F(...);
                   Y : Address := G(...);
                   for X'Address use Y;

       22.c   In the above, we have to evaluate the
              initialization expression for X before we
              know where to put the result.  This seems
              like an unreasonable implementation burden.

       22.d   The above code should instead be written
              like this:

       22.e        Y : constant Address := G(...);
                   X : Integer := F(...);
                   for X'Address use Y;

       22.f   This allows the expression "Y" to be safely
              evaluated before X is created.

       22.g   The constant could be a formal parameter of mode in.

       22.h   An implementation can support other nonstatic
              expressions if it wants to.  Expressions of type
              Address are hardly ever static, but their value
              might be known at compile time anyway in many
              cases.

GNAT does indeed permit many additional cases of non-static
expressions.  In particular, if the type involved is elementary there
are no restrictions (since in this case, holding a temporary copy of
the initialization value, if one is present, is inexpensive).  In
addition, if there is no implicit or explicit initialization, then
there are no restrictions.  GNAT will reject only the case where all
three of these conditions hold:

   * The type of the item is non-elementary (e.g. a record or array).

   * There is explicit or implicit initialization required for the
     object.  Note that access values are always implicitly initialized.

   * The address value is non-static.  Here GNAT is more permissive
     than the RM, and allows the address value to be the address of a
     previously declared stand-alone variable, as long as it does not
     itself have an address clause.

                     Anchor  : Some_Initialized_Type;
                     Overlay : Some_Initialized_Type;
                     for Overlay'Address use Anchor'Address;

     However, the prefix of the address clause cannot be an array
     component, or a component of a discriminated record.


As noted above in section 22.h, address values are typically
non-static.  In particular the To_Address function, even if applied to
a literal value, is a non-static function call.  To avoid this minor
annoyance, GNAT provides the implementation defined attribute
'To_Address.  The following two expressions have identical values:

        To_Address (16#1234_0000#)
        System'To_Address (16#1234_0000#);

except that the second form is considered to be a static expression, and
thus when used as an address clause value is always permitted.

Additionally, GNAT treats as static an address clause that is an
unchecked_conversion of a static integer value.  This simplifies the
porting of legacy code, and provides a portable equivalent to the GNAT
attribute `To_Address'.

   Another issue with address clauses is the interaction with alignment
requirements.  When an address clause is given for an object, the
address value must be consistent with the alignment of the object
(which is usually the same as the alignment of the type of the object).
If an address clause is given that specifies an inappropriately
aligned address value, then the program execution is erroneous.

   Since this source of erroneous behavior can have unfortunate
effects, GNAT checks (at compile time if possible, generating a
warning, or at execution time with a run-time check) that the alignment
is appropriate.  If the run-time check fails, then `Program_Error' is
raised.  This run-time check is suppressed if range checks are
suppressed, or if the special GNAT check Alignment_Check is suppressed,
or if `pragma Restrictions (No_Elaboration_Code)' is in effect.

   Finally, GNAT does not permit overlaying of objects of controlled
types or composite types containing a controlled component. In most
cases, the compiler can detect an attempt at such overlays and will
generate a warning at compile time and a Program_Error exception at run
time.

   An address clause cannot be given for an exported object.  More
understandably the real restriction is that objects with an address
clause cannot be exported.  This is because such variables are not
defined by the Ada program, so there is no external object to export.

   It is permissible to give an address clause and a pragma Import for
the same object.  In this case, the variable is not really defined by
the Ada program, so there is no external symbol to be linked.  The link
name and the external name are ignored in this case.  The reason that
we allow this combination is that it provides a useful idiom to avoid
unwanted initializations on objects with address clauses.

   When an address clause is given for an object that has implicit or
explicit initialization, then by default initialization takes place.
This means that the effect of the object declaration is to overwrite the
memory at the specified address.  This is almost always not what the
programmer wants, so GNAT will output a warning:

       with System;
       package G is
          type R is record
             M : Integer := 0;
          end record;

          Ext : R;
          for Ext'Address use System'To_Address (16#1234_1234#);
              |
       >>> warning: implicit initialization of "Ext" may
           modify overlaid storage
       >>> warning: use pragma Import for "Ext" to suppress
           initialization (RM B(24))

       end G;

As indicated by the warning message, the solution is to use a (dummy)
pragma Import to suppress this initialization.  The pragma tell the
compiler that the object is declared and initialized elsewhere.  The
following package compiles without warnings (and the initialization is
suppressed):

        with System;
        package G is
           type R is record
              M : Integer := 0;
           end record;

           Ext : R;
           for Ext'Address use System'To_Address (16#1234_1234#);
           pragma Import (Ada, Ext);
        end G;

A final issue with address clauses involves their use for overlaying
variables, as in the following example: 

       A : Integer;
       B : Integer;
       for B'Address use A'Address;

or alternatively, using the form recommended by the RM:

       A    : Integer;
       Addr : constant Address := A'Address;
       B    : Integer;
       for B'Address use Addr;

In both of these cases, `A' and `B' become aliased to one another via
the address clause. This use of address clauses to overlay variables,
achieving an effect similar to unchecked conversion was erroneous in
Ada 83, but in Ada 95 and Ada 2005 the effect is implementation
defined. Furthermore, the Ada RM specifically recommends that in a
situation like this, `B' should be subject to the following
implementation advice (RM 13.3(19)):

     19  If the Address of an object is specified, or it is imported
     or exported, then the implementation should not perform
     optimizations based on assumptions of no aliases.

GNAT follows this recommendation, and goes further by also applying
this recommendation to the overlaid variable (`A' in the above example)
in this case. This means that the overlay works "as expected", in that
a modification to one of the variables will affect the value of the
other.


File: gnat_rm.info,  Node: Effect of Convention on Representation,  Next: Determining the Representations chosen by GNAT,  Prev: Address Clauses,  Up: Representation Clauses and Pragmas

7.15 Effect of Convention on Representation
===========================================

Normally the specification of a foreign language convention for a type
or an object has no effect on the chosen representation.  In
particular, the representation chosen for data in GNAT generally meets
the standard system conventions, and for example records are laid out
in a manner that is consistent with C.  This means that specifying
convention C (for example) has no effect.

   There are four exceptions to this general rule:

   * Convention Fortran and array subtypes If pragma Convention Fortran
     is specified for an array subtype, then in accordance with the
     implementation advice in section 3.6.2(11) of the Ada Reference
     Manual, the array will be stored in a Fortran-compatible
     column-major manner, instead of the normal default row-major order.

   * Convention C and enumeration types GNAT normally stores
     enumeration types in 8, 16, or 32 bits as required to accommodate
     all values of the type.  For example, for the enumeration type
     declared by:

             type Color is (Red, Green, Blue);

     8 bits is sufficient to store all values of the type, so by
     default, objects of type `Color' will be represented using 8 bits.
     However, normal C convention is to use 32 bits for all enum
     values in C, since enum values are essentially of type int.  If
     pragma `Convention C' is specified for an Ada enumeration type,
     then the size is modified as necessary (usually to 32 bits) to be
     consistent with the C convention for enum values.

     Note that this treatment applies only to types. If Convention C is
     given for an enumeration object, where the enumeration type is not
     Convention C, then Object_Size bits are allocated. For example,
     for a normal enumeration type, with less than 256 elements, only 8
     bits will be allocated for the object.  Since this may be a
     surprise in terms of what C expects, GNAT will issue a warning in
     this situation. The warning can be suppressed by giving an explicit
     size clause specifying the desired size.

   * Convention C/Fortran and Boolean types In C, the usual convention
     for boolean values, that is values used for conditions, is that
     zero represents false, and nonzero values represent true.  In Ada,
     the normal convention is that two specific values, typically 0/1,
     are used to represent false/true respectively.

     Fortran has a similar convention for `LOGICAL' values (any nonzero
     value represents true).

     To accommodate the Fortran and C conventions, if a pragma
     Convention specifies C or Fortran convention for a derived
     Boolean, as in the following example:

             type C_Switch is new Boolean;
             pragma Convention (C, C_Switch);

     then the GNAT generated code will treat any nonzero value as true.
     For truth values generated by GNAT, the conventional value 1 will
     be used for True, but when one of these values is read, any
     nonzero value is treated as True.

   * Access types on OpenVMS For 64-bit OpenVMS systems, access types
     (other than those for unconstrained arrays) are 64-bits long. An
     exception to this rule is for the case of C-convention access
     types where there is no explicit size clause present (or inherited
     for derived types). In this case, GNAT chooses to make these
     pointers 32-bits, which provides an easier path for migration of
     32-bit legacy code. size clause specifying 64-bits must be used to
     obtain a 64-bit pointer.



File: gnat_rm.info,  Node: Determining the Representations chosen by GNAT,  Prev: Effect of Convention on Representation,  Up: Representation Clauses and Pragmas

7.16 Determining the Representations chosen by GNAT
===================================================

Although the descriptions in this section are intended to be complete,
it is often easier to simply experiment to see what GNAT accepts and
what the effect is on the layout of types and objects.

   As required by the Ada RM, if a representation clause is not
accepted, then it must be rejected as illegal by the compiler.
However, when a representation clause or pragma is accepted, there can
still be questions of what the compiler actually does.  For example, if
a partial record representation clause specifies the location of some
components and not others, then where are the non-specified components
placed? Or if pragma `Pack' is used on a record, then exactly where are
the resulting fields placed? The section on pragma `Pack' in this
chapter can be used to answer the second question, but it is often
easier to just see what the compiler does.

   For this purpose, GNAT provides the option `-gnatR'.  If you compile
with this option, then the compiler will output information on the
actual representations chosen, in a format similar to source
representation clauses.  For example, if we compile the package:

     package q is
        type r (x : boolean) is tagged record
           case x is
              when True => S : String (1 .. 100);
              when False => null;
           end case;
        end record;

        type r2 is new r (false) with record
           y2 : integer;
        end record;

        for r2 use record
           y2 at 16 range 0 .. 31;
        end record;

        type x is record
           y : character;
        end record;

        type x1 is array (1 .. 10) of x;
        for x1'component_size use 11;

        type ia is access integer;

        type Rb1 is array (1 .. 13) of Boolean;
        pragma Pack (rb1);

        type Rb2 is array (1 .. 65) of Boolean;
        pragma Pack (rb2);

        type x2 is record
           l1 : Boolean;
           l2 : Duration;
           l3 : Float;
           l4 : Boolean;
           l5 : Rb1;
           l6 : Rb2;
        end record;
        pragma Pack (x2);
     end q;

using the switch `-gnatR' we obtain the following output:

     Representation information for unit q
     -------------------------------------

     for r'Size use ??;
     for r'Alignment use 4;
     for r use record
        x    at 4 range  0 .. 7;
        _tag at 0 range  0 .. 31;
        s    at 5 range  0 .. 799;
     end record;

     for r2'Size use 160;
     for r2'Alignment use 4;
     for r2 use record
        x       at  4 range  0 .. 7;
        _tag    at  0 range  0 .. 31;
        _parent at  0 range  0 .. 63;
        y2      at 16 range  0 .. 31;
     end record;

     for x'Size use 8;
     for x'Alignment use 1;
     for x use record
        y at 0 range  0 .. 7;
     end record;

     for x1'Size use 112;
     for x1'Alignment use 1;
     for x1'Component_Size use 11;

     for rb1'Size use 13;
     for rb1'Alignment use 2;
     for rb1'Component_Size use 1;

     for rb2'Size use 72;
     for rb2'Alignment use 1;
     for rb2'Component_Size use 1;

     for x2'Size use 224;
     for x2'Alignment use 4;
     for x2 use record
        l1 at  0 range  0 .. 0;
        l2 at  0 range  1 .. 64;
        l3 at 12 range  0 .. 31;
        l4 at 16 range  0 .. 0;
        l5 at 16 range  1 .. 13;
        l6 at 18 range  0 .. 71;
     end record;

The Size values are actually the Object_Size, i.e. the default size that
will be allocated for objects of the type.  The ?? size for type r
indicates that we have a variant record, and the actual size of objects
will depend on the discriminant value.

   The Alignment values show the actual alignment chosen by the compiler
for each record or array type.

   The record representation clause for type r shows where all fields
are placed, including the compiler generated tag field (whose location
cannot be controlled by the programmer).

   The record representation clause for the type extension r2 shows all
the fields present, including the parent field, which is a copy of the
fields of the parent type of r2, i.e. r1.

   The component size and size clauses for types rb1 and rb2 show the
exact effect of pragma `Pack' on these arrays, and the record
representation clause for type x2 shows how pragma `Pack' affects this
record type.

   In some cases, it may be useful to cut and paste the representation
clauses generated by the compiler into the original source to fix and
guarantee the actual representation to be used.


File: gnat_rm.info,  Node: Standard Library Routines,  Next: The Implementation of Standard I/O,  Prev: Representation Clauses and Pragmas,  Up: Top

8 Standard Library Routines
***************************

The Ada Reference Manual contains in Annex A a full description of an
extensive set of standard library routines that can be used in any Ada
program, and which must be provided by all Ada compilers.  They are
analogous to the standard C library used by C programs.

   GNAT implements all of the facilities described in annex A, and for
most purposes the description in the Ada Reference Manual, or
appropriate Ada text book, will be sufficient for making use of these
facilities.

   In the case of the input-output facilities, *Note The Implementation
of Standard I/O::, gives details on exactly how GNAT interfaces to the
file system.  For the remaining packages, the Ada Reference Manual
should be sufficient.  The following is a list of the packages included,
together with a brief description of the functionality that is provided.

   For completeness, references are included to other predefined library
routines defined in other sections of the Ada Reference Manual (these
are cross-indexed from Annex A).

`Ada (A.2)'
     This is a parent package for all the standard library packages.
     It is usually included implicitly in your program, and itself
     contains no useful data or routines.

`Ada.Calendar (9.6)'
     `Calendar' provides time of day access, and routines for
     manipulating times and durations.

`Ada.Characters (A.3.1)'
     This is a dummy parent package that contains no useful entities

`Ada.Characters.Handling (A.3.2)'
     This package provides some basic character handling capabilities,
     including classification functions for classes of characters (e.g.
     test for letters, or digits).

`Ada.Characters.Latin_1 (A.3.3)'
     This package includes a complete set of definitions of the
     characters that appear in type CHARACTER.  It is useful for
     writing programs that will run in international environments.  For
     example, if you want an upper case E with an acute accent in a
     string, it is often better to use the definition of `UC_E_Acute'
     in this package.  Then your program will print in an
     understandable manner even if your environment does not support
     these extended characters.

`Ada.Command_Line (A.15)'
     This package provides access to the command line parameters and
     the name of the current program (analogous to the use of `argc'
     and `argv' in C), and also allows the exit status for the program
     to be set in a system-independent manner.

`Ada.Decimal (F.2)'
     This package provides constants describing the range of decimal
     numbers implemented, and also a decimal divide routine (analogous
     to the COBOL verb DIVIDE ... GIVING ... REMAINDER ...)

`Ada.Direct_IO (A.8.4)'
     This package provides input-output using a model of a set of
     records of fixed-length, containing an arbitrary definite Ada
     type, indexed by an integer record number.

`Ada.Dynamic_Priorities (D.5)'
     This package allows the priorities of a task to be adjusted
     dynamically as the task is running.

`Ada.Exceptions (11.4.1)'
     This package provides additional information on exceptions, and
     also contains facilities for treating exceptions as data objects,
     and raising exceptions with associated messages.

`Ada.Finalization (7.6)'
     This package contains the declarations and subprograms to support
     the use of controlled types, providing for automatic
     initialization and finalization (analogous to the constructors and
     destructors of C++)

`Ada.Interrupts (C.3.2)'
     This package provides facilities for interfacing to interrupts,
     which includes the set of signals or conditions that can be raised
     and recognized as interrupts.

`Ada.Interrupts.Names (C.3.2)'
     This package provides the set of interrupt names (actually signal
     or condition names) that can be handled by GNAT.

`Ada.IO_Exceptions (A.13)'
     This package defines the set of exceptions that can be raised by
     use of the standard IO packages.

`Ada.Numerics'
     This package contains some standard constants and exceptions used
     throughout the numerics packages.  Note that the constants pi and
     e are defined here, and it is better to use these definitions than
     rolling your own.

`Ada.Numerics.Complex_Elementary_Functions'
     Provides the implementation of standard elementary functions (such
     as log and trigonometric functions) operating on complex numbers
     using the standard `Float' and the `Complex' and `Imaginary' types
     created by the package `Numerics.Complex_Types'.

`Ada.Numerics.Complex_Types'
     This is a predefined instantiation of
     `Numerics.Generic_Complex_Types' using `Standard.Float' to build
     the type `Complex' and `Imaginary'.

`Ada.Numerics.Discrete_Random'
     This generic package provides a random number generator suitable
     for generating uniformly distributed values of a specified
     discrete subtype.

`Ada.Numerics.Float_Random'
     This package provides a random number generator suitable for
     generating uniformly distributed floating point values in the unit
     interval.

`Ada.Numerics.Generic_Complex_Elementary_Functions'
     This is a generic version of the package that provides the
     implementation of standard elementary functions (such as log and
     trigonometric functions) for an arbitrary complex type.

     The following predefined instantiations of this package are
     provided:

    `Short_Float'
          `Ada.Numerics.Short_Complex_Elementary_Functions'

    `Float'
          `Ada.Numerics.Complex_Elementary_Functions'

    `Long_Float'
          `Ada.Numerics.Long_Complex_Elementary_Functions'

`Ada.Numerics.Generic_Complex_Types'
     This is a generic package that allows the creation of complex
     types, with associated complex arithmetic operations.

     The following predefined instantiations of this package exist
    `Short_Float'
          `Ada.Numerics.Short_Complex_Complex_Types'

    `Float'
          `Ada.Numerics.Complex_Complex_Types'

    `Long_Float'
          `Ada.Numerics.Long_Complex_Complex_Types'

`Ada.Numerics.Generic_Elementary_Functions'
     This is a generic package that provides the implementation of
     standard elementary functions (such as log an trigonometric
     functions) for an arbitrary float type.

     The following predefined instantiations of this package exist

    `Short_Float'
          `Ada.Numerics.Short_Elementary_Functions'

    `Float'
          `Ada.Numerics.Elementary_Functions'

    `Long_Float'
          `Ada.Numerics.Long_Elementary_Functions'

`Ada.Real_Time (D.8)'
     This package provides facilities similar to those of `Calendar',
     but operating with a finer clock suitable for real time control.
     Note that annex D requires that there be no backward clock jumps,
     and GNAT generally guarantees this behavior, but of course if the
     external clock on which the GNAT runtime depends is deliberately
     reset by some external event, then such a backward jump may occur.

`Ada.Sequential_IO (A.8.1)'
     This package provides input-output facilities for sequential files,
     which can contain a sequence of values of a single type, which can
     be any Ada type, including indefinite (unconstrained) types.

`Ada.Storage_IO (A.9)'
     This package provides a facility for mapping arbitrary Ada types
     to and from a storage buffer.  It is primarily intended for the
     creation of new IO packages.

`Ada.Streams (13.13.1)'
     This is a generic package that provides the basic support for the
     concept of streams as used by the stream attributes (`Input',
     `Output', `Read' and `Write').

`Ada.Streams.Stream_IO (A.12.1)'
     This package is a specialization of the type `Streams' defined in
     package `Streams' together with a set of operations providing
     Stream_IO capability.  The Stream_IO model permits both random and
     sequential access to a file which can contain an arbitrary set of
     values of one or more Ada types.

`Ada.Strings (A.4.1)'
     This package provides some basic constants used by the string
     handling packages.

`Ada.Strings.Bounded (A.4.4)'
     This package provides facilities for handling variable length
     strings.  The bounded model requires a maximum length.  It is thus
     somewhat more limited than the unbounded model, but avoids the use
     of dynamic allocation or finalization.

`Ada.Strings.Fixed (A.4.3)'
     This package provides facilities for handling fixed length strings.

`Ada.Strings.Maps (A.4.2)'
     This package provides facilities for handling character mappings
     and arbitrarily defined subsets of characters.  For instance it is
     useful in defining specialized translation tables.

`Ada.Strings.Maps.Constants (A.4.6)'
     This package provides a standard set of predefined mappings and
     predefined character sets.  For example, the standard upper to
     lower case conversion table is found in this package.  Note that
     upper to lower case conversion is non-trivial if you want to take
     the entire set of characters, including extended characters like E
     with an acute accent, into account.  You should use the mappings
     in this package (rather than adding 32 yourself) to do case
     mappings.

`Ada.Strings.Unbounded (A.4.5)'
     This package provides facilities for handling variable length
     strings.  The unbounded model allows arbitrary length strings, but
     requires the use of dynamic allocation and finalization.

`Ada.Strings.Wide_Bounded (A.4.7)'
`Ada.Strings.Wide_Fixed (A.4.7)'
`Ada.Strings.Wide_Maps (A.4.7)'
`Ada.Strings.Wide_Maps.Constants (A.4.7)'
`Ada.Strings.Wide_Unbounded (A.4.7)'
     These packages provide analogous capabilities to the corresponding
     packages without `Wide_' in the name, but operate with the types
     `Wide_String' and `Wide_Character' instead of `String' and
     `Character'.

`Ada.Strings.Wide_Wide_Bounded (A.4.7)'
`Ada.Strings.Wide_Wide_Fixed (A.4.7)'
`Ada.Strings.Wide_Wide_Maps (A.4.7)'
`Ada.Strings.Wide_Wide_Maps.Constants (A.4.7)'
`Ada.Strings.Wide_Wide_Unbounded (A.4.7)'
     These packages provide analogous capabilities to the corresponding
     packages without `Wide_' in the name, but operate with the types
     `Wide_Wide_String' and `Wide_Wide_Character' instead of `String'
     and `Character'.

`Ada.Synchronous_Task_Control (D.10)'
     This package provides some standard facilities for controlling task
     communication in a synchronous manner.

`Ada.Tags'
     This package contains definitions for manipulation of the tags of
     tagged values.

`Ada.Task_Attributes'
     This package provides the capability of associating arbitrary
     task-specific data with separate tasks.

`Ada.Text_IO'
     This package provides basic text input-output capabilities for
     character, string and numeric data.  The subpackages of this
     package are listed next.

`Ada.Text_IO.Decimal_IO'
     Provides input-output facilities for decimal fixed-point types

`Ada.Text_IO.Enumeration_IO'
     Provides input-output facilities for enumeration types.

`Ada.Text_IO.Fixed_IO'
     Provides input-output facilities for ordinary fixed-point types.

`Ada.Text_IO.Float_IO'
     Provides input-output facilities for float types.  The following
     predefined instantiations of this generic package are available:

    `Short_Float'
          `Short_Float_Text_IO'

    `Float'
          `Float_Text_IO'

    `Long_Float'
          `Long_Float_Text_IO'

`Ada.Text_IO.Integer_IO'
     Provides input-output facilities for integer types.  The following
     predefined instantiations of this generic package are available:

    `Short_Short_Integer'
          `Ada.Short_Short_Integer_Text_IO'

    `Short_Integer'
          `Ada.Short_Integer_Text_IO'

    `Integer'
          `Ada.Integer_Text_IO'

    `Long_Integer'
          `Ada.Long_Integer_Text_IO'

    `Long_Long_Integer'
          `Ada.Long_Long_Integer_Text_IO'

`Ada.Text_IO.Modular_IO'
     Provides input-output facilities for modular (unsigned) types

`Ada.Text_IO.Complex_IO (G.1.3)'
     This package provides basic text input-output capabilities for
     complex data.

`Ada.Text_IO.Editing (F.3.3)'
     This package contains routines for edited output, analogous to the
     use of pictures in COBOL.  The picture formats used by this
     package are a close copy of the facility in COBOL.

`Ada.Text_IO.Text_Streams (A.12.2)'
     This package provides a facility that allows Text_IO files to be
     treated as streams, so that the stream attributes can be used for
     writing arbitrary data, including binary data, to Text_IO files.

`Ada.Unchecked_Conversion (13.9)'
     This generic package allows arbitrary conversion from one type to
     another of the same size, providing for breaking the type safety in
     special circumstances.

     If the types have the same Size (more accurately the same
     Value_Size), then the effect is simply to transfer the bits from
     the source to the target type without any modification.  This
     usage is well defined, and for simple types whose representation
     is typically the same across all implementations, gives a portable
     method of performing such conversions.

     If the types do not have the same size, then the result is
     implementation defined, and thus may be non-portable.  The
     following describes how GNAT handles such unchecked conversion
     cases.

     If the types are of different sizes, and are both discrete types,
     then the effect is of a normal type conversion without any
     constraint checking.  In particular if the result type has a
     larger size, the result will be zero or sign extended.  If the
     result type has a smaller size, the result will be truncated by
     ignoring high order bits.

     If the types are of different sizes, and are not both discrete
     types, then the conversion works as though pointers were created
     to the source and target, and the pointer value is converted.  The
     effect is that bits are copied from successive low order storage
     units and bits of the source up to the length of the target type.

     A warning is issued if the lengths differ, since the effect in this
     case is implementation dependent, and the above behavior may not
     match that of some other compiler.

     A pointer to one type may be converted to a pointer to another
     type using unchecked conversion.  The only case in which the
     effect is undefined is when one or both pointers are pointers to
     unconstrained array types.  In this case, the bounds information
     may get incorrectly transferred, and in particular, GNAT uses
     double size pointers for such types, and it is meaningless to
     convert between such pointer types.  GNAT will issue a warning if
     the alignment of the target designated type is more strict than
     the alignment of the source designated type (since the result may
     be unaligned in this case).

     A pointer other than a pointer to an unconstrained array type may
     be converted to and from System.Address.  Such usage is common in
     Ada 83 programs, but note that Ada.Address_To_Access_Conversions
     is the preferred method of performing such conversions in Ada 95
     and Ada 2005.  Neither unchecked conversion nor
     Ada.Address_To_Access_Conversions should be used in conjunction
     with pointers to unconstrained objects, since the bounds
     information cannot be handled correctly in this case.

`Ada.Unchecked_Deallocation (13.11.2)'
     This generic package allows explicit freeing of storage previously
     allocated by use of an allocator.

`Ada.Wide_Text_IO (A.11)'
     This package is similar to `Ada.Text_IO', except that the external
     file supports wide character representations, and the internal
     types are `Wide_Character' and `Wide_String' instead of `Character'
     and `String'.  It contains generic subpackages listed next.

`Ada.Wide_Text_IO.Decimal_IO'
     Provides input-output facilities for decimal fixed-point types

`Ada.Wide_Text_IO.Enumeration_IO'
     Provides input-output facilities for enumeration types.

`Ada.Wide_Text_IO.Fixed_IO'
     Provides input-output facilities for ordinary fixed-point types.

`Ada.Wide_Text_IO.Float_IO'
     Provides input-output facilities for float types.  The following
     predefined instantiations of this generic package are available:

    `Short_Float'
          `Short_Float_Wide_Text_IO'

    `Float'
          `Float_Wide_Text_IO'

    `Long_Float'
          `Long_Float_Wide_Text_IO'

`Ada.Wide_Text_IO.Integer_IO'
     Provides input-output facilities for integer types.  The following
     predefined instantiations of this generic package are available:

    `Short_Short_Integer'
          `Ada.Short_Short_Integer_Wide_Text_IO'

    `Short_Integer'
          `Ada.Short_Integer_Wide_Text_IO'

    `Integer'
          `Ada.Integer_Wide_Text_IO'

    `Long_Integer'
          `Ada.Long_Integer_Wide_Text_IO'

    `Long_Long_Integer'
          `Ada.Long_Long_Integer_Wide_Text_IO'

`Ada.Wide_Text_IO.Modular_IO'
     Provides input-output facilities for modular (unsigned) types

`Ada.Wide_Text_IO.Complex_IO (G.1.3)'
     This package is similar to `Ada.Text_IO.Complex_IO', except that
     the external file supports wide character representations.

`Ada.Wide_Text_IO.Editing (F.3.4)'
     This package is similar to `Ada.Text_IO.Editing', except that the
     types are `Wide_Character' and `Wide_String' instead of
     `Character' and `String'.

`Ada.Wide_Text_IO.Streams (A.12.3)'
     This package is similar to `Ada.Text_IO.Streams', except that the
     types are `Wide_Character' and `Wide_String' instead of
     `Character' and `String'.

`Ada.Wide_Wide_Text_IO (A.11)'
     This package is similar to `Ada.Text_IO', except that the external
     file supports wide character representations, and the internal
     types are `Wide_Character' and `Wide_String' instead of `Character'
     and `String'.  It contains generic subpackages listed next.

`Ada.Wide_Wide_Text_IO.Decimal_IO'
     Provides input-output facilities for decimal fixed-point types

`Ada.Wide_Wide_Text_IO.Enumeration_IO'
     Provides input-output facilities for enumeration types.

`Ada.Wide_Wide_Text_IO.Fixed_IO'
     Provides input-output facilities for ordinary fixed-point types.

`Ada.Wide_Wide_Text_IO.Float_IO'
     Provides input-output facilities for float types.  The following
     predefined instantiations of this generic package are available:

    `Short_Float'
          `Short_Float_Wide_Wide_Text_IO'

    `Float'
          `Float_Wide_Wide_Text_IO'

    `Long_Float'
          `Long_Float_Wide_Wide_Text_IO'

`Ada.Wide_Wide_Text_IO.Integer_IO'
     Provides input-output facilities for integer types.  The following
     predefined instantiations of this generic package are available:

    `Short_Short_Integer'
          `Ada.Short_Short_Integer_Wide_Wide_Text_IO'

    `Short_Integer'
          `Ada.Short_Integer_Wide_Wide_Text_IO'

    `Integer'
          `Ada.Integer_Wide_Wide_Text_IO'

    `Long_Integer'
          `Ada.Long_Integer_Wide_Wide_Text_IO'

    `Long_Long_Integer'
          `Ada.Long_Long_Integer_Wide_Wide_Text_IO'

`Ada.Wide_Wide_Text_IO.Modular_IO'
     Provides input-output facilities for modular (unsigned) types

`Ada.Wide_Wide_Text_IO.Complex_IO (G.1.3)'
     This package is similar to `Ada.Text_IO.Complex_IO', except that
     the external file supports wide character representations.

`Ada.Wide_Wide_Text_IO.Editing (F.3.4)'
     This package is similar to `Ada.Text_IO.Editing', except that the
     types are `Wide_Character' and `Wide_String' instead of
     `Character' and `String'.

`Ada.Wide_Wide_Text_IO.Streams (A.12.3)'
     This package is similar to `Ada.Text_IO.Streams', except that the
     types are `Wide_Character' and `Wide_String' instead of
     `Character' and `String'.


File: gnat_rm.info,  Node: The Implementation of Standard I/O,  Next: The GNAT Library,  Prev: Standard Library Routines,  Up: Top

9 The Implementation of Standard I/O
************************************

GNAT implements all the required input-output facilities described in
A.6 through A.14.  These sections of the Ada Reference Manual describe
the required behavior of these packages from the Ada point of view, and
if you are writing a portable Ada program that does not need to know the
exact manner in which Ada maps to the outside world when it comes to
reading or writing external files, then you do not need to read this
chapter.  As long as your files are all regular files (not pipes or
devices), and as long as you write and read the files only from Ada, the
description in the Ada Reference Manual is sufficient.

   However, if you want to do input-output to pipes or other devices,
such as the keyboard or screen, or if the files you are dealing with are
either generated by some other language, or to be read by some other
language, then you need to know more about the details of how the GNAT
implementation of these input-output facilities behaves.

   In this chapter we give a detailed description of exactly how GNAT
interfaces to the file system.  As always, the sources of the system are
available to you for answering questions at an even more detailed level,
but for most purposes the information in this chapter will suffice.

   Another reason that you may need to know more about how input-output
is implemented arises when you have a program written in mixed languages
where, for example, files are shared between the C and Ada sections of
the same program.  GNAT provides some additional facilities, in the form
of additional child library packages, that facilitate this sharing, and
these additional facilities are also described in this chapter.

* Menu:

* Standard I/O Packages::
* FORM Strings::
* Direct_IO::
* Sequential_IO::
* Text_IO::
* Wide_Text_IO::
* Wide_Wide_Text_IO::
* Stream_IO::
* Text Translation::
* Shared Files::
* Filenames encoding::
* Open Modes::
* Operations on C Streams::
* Interfacing to C Streams::


File: gnat_rm.info,  Node: Standard I/O Packages,  Next: FORM Strings,  Up: The Implementation of Standard I/O

9.1 Standard I/O Packages
=========================

The Standard I/O packages described in Annex A for

   * Ada.Text_IO

   * Ada.Text_IO.Complex_IO

   * Ada.Text_IO.Text_Streams

   * Ada.Wide_Text_IO

   * Ada.Wide_Text_IO.Complex_IO

   * Ada.Wide_Text_IO.Text_Streams

   * Ada.Wide_Wide_Text_IO

   * Ada.Wide_Wide_Text_IO.Complex_IO

   * Ada.Wide_Wide_Text_IO.Text_Streams

   * Ada.Stream_IO

   * Ada.Sequential_IO

   * Ada.Direct_IO

are implemented using the C library streams facility; where

   * All files are opened using `fopen'.

   * All input/output operations use `fread'/`fwrite'.

There is no internal buffering of any kind at the Ada library level.
The only buffering is that provided at the system level in the
implementation of the library routines that support streams. This
facilitates shared use of these streams by mixed language programs.
Note though that system level buffering is explicitly enabled at
elaboration of the standard I/O packages and that can have an impact on
mixed language programs, in particular those using I/O before calling
the Ada elaboration routine (e.g. adainit). It is recommended to call
the Ada elaboration routine before performing any I/O or when
impractical, flush the common I/O streams and in particular
Standard_Output before elaborating the Ada code.


File: gnat_rm.info,  Node: FORM Strings,  Next: Direct_IO,  Prev: Standard I/O Packages,  Up: The Implementation of Standard I/O

9.2 FORM Strings
================

The format of a FORM string in GNAT is:

     "keyword=value,keyword=value,...,keyword=value"

where letters may be in upper or lower case, and there are no spaces
between values.  The order of the entries is not important.  Currently
the following keywords defined.

     TEXT_TRANSLATION=[YES|NO]
     SHARED=[YES|NO]
     WCEM=[n|h|u|s|e|8|b]
     ENCODING=[UTF8|8BITS]

The use of these parameters is described later in this section.


File: gnat_rm.info,  Node: Direct_IO,  Next: Sequential_IO,  Prev: FORM Strings,  Up: The Implementation of Standard I/O

9.3 Direct_IO
=============

Direct_IO can only be instantiated for definite types.  This is a
restriction of the Ada language, which means that the records are fixed
length (the length being determined by `TYPE'Size', rounded up to the
next storage unit boundary if necessary).

   The records of a Direct_IO file are simply written to the file in
index sequence, with the first record starting at offset zero, and
subsequent records following.  There is no control information of any
kind.  For example, if 32-bit integers are being written, each record
takes 4-bytes, so the record at index K starts at offset (K-1)*4.

   There is no limit on the size of Direct_IO files, they are expanded
as necessary to accommodate whatever records are written to the file.


File: gnat_rm.info,  Node: Sequential_IO,  Next: Text_IO,  Prev: Direct_IO,  Up: The Implementation of Standard I/O

9.4 Sequential_IO
=================

Sequential_IO may be instantiated with either a definite (constrained)
or indefinite (unconstrained) type.

   For the definite type case, the elements written to the file are
simply the memory images of the data values with no control information
of any kind.  The resulting file should be read using the same type, no
validity checking is performed on input.

   For the indefinite type case, the elements written consist of two
parts.  First is the size of the data item, written as the memory image
of a `Interfaces.C.size_t' value, followed by the memory image of the
data value.  The resulting file can only be read using the same
(unconstrained) type.  Normal assignment checks are performed on these
read operations, and if these checks fail, `Data_Error' is raised.  In
particular, in the array case, the lengths must match, and in the
variant record case, if the variable for a particular read operation is
constrained, the discriminants must match.

   Note that it is not possible to use Sequential_IO to write variable
length array items, and then read the data back into different length
arrays.  For example, the following will raise `Data_Error':

      package IO is new Sequential_IO (String);
      F : IO.File_Type;
      S : String (1..4);
      ...
      IO.Create (F)
      IO.Write (F, "hello!")
      IO.Reset (F, Mode=>In_File);
      IO.Read (F, S);
      Put_Line (S);

On some Ada implementations, this will print `hell', but the program is
clearly incorrect, since there is only one element in the file, and that
element is the string `hello!'.

   In Ada 95 and Ada 2005, this kind of behavior can be legitimately
achieved using Stream_IO, and this is the preferred mechanism.  In
particular, the above program fragment rewritten to use Stream_IO will
work correctly.


File: gnat_rm.info,  Node: Text_IO,  Next: Wide_Text_IO,  Prev: Sequential_IO,  Up: The Implementation of Standard I/O

9.5 Text_IO
===========

Text_IO files consist of a stream of characters containing the following
special control characters:

     LF (line feed, 16#0A#) Line Mark
     FF (form feed, 16#0C#) Page Mark

A canonical Text_IO file is defined as one in which the following
conditions are met:

   * The character `LF' is used only as a line mark, i.e. to mark the
     end of the line.

   * The character `FF' is used only as a page mark, i.e. to mark the
     end of a page and consequently can appear only immediately
     following a `LF' (line mark) character.

   * The file ends with either `LF' (line mark) or `LF'-`FF' (line
     mark, page mark).  In the former case, the page mark is implicitly
     assumed to be present.

A file written using Text_IO will be in canonical form provided that no
explicit `LF' or `FF' characters are written using `Put' or `Put_Line'.
There will be no `FF' character at the end of the file unless an
explicit `New_Page' operation was performed before closing the file.

   A canonical Text_IO file that is a regular file (i.e., not a device
or a pipe) can be read using any of the routines in Text_IO.  The
semantics in this case will be exactly as defined in the Ada Reference
Manual, and all the routines in Text_IO are fully implemented.

   A text file that does not meet the requirements for a canonical
Text_IO file has one of the following:

   * The file contains `FF' characters not immediately following a `LF'
     character.

   * The file contains `LF' or `FF' characters written by `Put' or
     `Put_Line', which are not logically considered to be line marks or
     page marks.

   * The file ends in a character other than `LF' or `FF', i.e. there
     is no explicit line mark or page mark at the end of the file.

Text_IO can be used to read such non-standard text files but subprograms
to do with line or page numbers do not have defined meanings.  In
particular, a `FF' character that does not follow a `LF' character may
or may not be treated as a page mark from the point of view of page and
line numbering.  Every `LF' character is considered to end a line, and
there is an implied `LF' character at the end of the file.

* Menu:

* Text_IO Stream Pointer Positioning::
* Text_IO Reading and Writing Non-Regular Files::
* Get_Immediate::
* Treating Text_IO Files as Streams::
* Text_IO Extensions::
* Text_IO Facilities for Unbounded Strings::


File: gnat_rm.info,  Node: Text_IO Stream Pointer Positioning,  Next: Text_IO Reading and Writing Non-Regular Files,  Up: Text_IO

9.5.1 Stream Pointer Positioning
--------------------------------

`Ada.Text_IO' has a definition of current position for a file that is
being read.  No internal buffering occurs in Text_IO, and usually the
physical position in the stream used to implement the file corresponds
to this logical position defined by Text_IO.  There are two exceptions:

   * After a call to `End_Of_Page' that returns `True', the stream is
     positioned past the `LF' (line mark) that precedes the page mark.
     Text_IO maintains an internal flag so that subsequent read
     operations properly handle the logical position which is unchanged
     by the `End_Of_Page' call.

   * After a call to `End_Of_File' that returns `True', if the Text_IO
     file was positioned before the line mark at the end of file before
     the call, then the logical position is unchanged, but the stream
     is physically positioned right at the end of file (past the line
     mark, and past a possible page mark following the line mark.
     Again Text_IO maintains internal flags so that subsequent read
     operations properly handle the logical position.

These discrepancies have no effect on the observable behavior of
Text_IO, but if a single Ada stream is shared between a C program and
Ada program, or shared (using `shared=yes' in the form string) between
two Ada files, then the difference may be observable in some situations.


File: gnat_rm.info,  Node: Text_IO Reading and Writing Non-Regular Files,  Next: Get_Immediate,  Prev: Text_IO Stream Pointer Positioning,  Up: Text_IO

9.5.2 Reading and Writing Non-Regular Files
-------------------------------------------

A non-regular file is a device (such as a keyboard), or a pipe.  Text_IO
can be used for reading and writing.  Writing is not affected and the
sequence of characters output is identical to the normal file case, but
for reading, the behavior of Text_IO is modified to avoid undesirable
look-ahead as follows:

   An input file that is not a regular file is considered to have no
page marks.  Any `Ascii.FF' characters (the character normally used for
a page mark) appearing in the file are considered to be data
characters.  In particular:

   * `Get_Line' and `Skip_Line' do not test for a page mark following a
     line mark.  If a page mark appears, it will be treated as a data
     character.

   * This avoids the need to wait for an extra character to be typed or
     entered from the pipe to complete one of these operations.

   * `End_Of_Page' always returns `False'

   * `End_Of_File' will return `False' if there is a page mark at the
     end of the file.

Output to non-regular files is the same as for regular files.  Page
marks may be written to non-regular files using `New_Page', but as noted
above they will not be treated as page marks on input if the output is
piped to another Ada program.

   Another important discrepancy when reading non-regular files is that
the end of file indication is not "sticky".  If an end of file is
entered, e.g. by pressing the <EOT> key, then end of file is signaled
once (i.e. the test `End_Of_File' will yield `True', or a read will
raise `End_Error'), but then reading can resume to read data past that
end of file indication, until another end of file indication is entered.


File: gnat_rm.info,  Node: Get_Immediate,  Next: Treating Text_IO Files as Streams,  Prev: Text_IO Reading and Writing Non-Regular Files,  Up: Text_IO

9.5.3 Get_Immediate
-------------------

Get_Immediate returns the next character (including control characters)
from the input file.  In particular, Get_Immediate will return LF or FF
characters used as line marks or page marks.  Such operations leave the
file positioned past the control character, and it is thus not treated
as having its normal function.  This means that page, line and column
counts after this kind of Get_Immediate call are set as though the mark
did not occur.  In the case where a Get_Immediate leaves the file
positioned between the line mark and page mark (which is not normally
possible), it is undefined whether the FF character will be treated as a
page mark.


File: gnat_rm.info,  Node: Treating Text_IO Files as Streams,  Next: Text_IO Extensions,  Prev: Get_Immediate,  Up: Text_IO

9.5.4 Treating Text_IO Files as Streams
---------------------------------------

The package `Text_IO.Streams' allows a Text_IO file to be treated as a
stream.  Data written to a Text_IO file in this stream mode is binary
data.  If this binary data contains bytes 16#0A# (`LF') or 16#0C#
(`FF'), the resulting file may have non-standard format.  Similarly if
read operations are used to read from a Text_IO file treated as a
stream, then `LF' and `FF' characters may be skipped and the effect is
similar to that described above for `Get_Immediate'.


File: gnat_rm.info,  Node: Text_IO Extensions,  Next: Text_IO Facilities for Unbounded Strings,  Prev: Treating Text_IO Files as Streams,  Up: Text_IO

9.5.5 Text_IO Extensions
------------------------

A package GNAT.IO_Aux in the GNAT library provides some useful
extensions to the standard `Text_IO' package:

   * function File_Exists (Name : String) return Boolean; Determines if
     a file of the given name exists.

   * function Get_Line return String; Reads a string from the standard
     input file.  The value returned is exactly the length of the line
     that was read.

   * function Get_Line (File : Ada.Text_IO.File_Type) return String;
     Similar, except that the parameter File specifies the file from
     which the string is to be read.



File: gnat_rm.info,  Node: Text_IO Facilities for Unbounded Strings,  Prev: Text_IO Extensions,  Up: Text_IO

9.5.6 Text_IO Facilities for Unbounded Strings
----------------------------------------------

The package `Ada.Strings.Unbounded.Text_IO' in library files
`a-suteio.ads/adb' contains some GNAT-specific subprograms useful for
Text_IO operations on unbounded strings:

   * function Get_Line (File : File_Type) return Unbounded_String;
     Reads a line from the specified file and returns the result as an
     unbounded string.

   * procedure Put (File : File_Type; U : Unbounded_String); Writes the
     value of the given unbounded string to the specified file Similar
     to the effect of `Put (To_String (U))' except that an extra copy
     is avoided.

   * procedure Put_Line (File : File_Type; U : Unbounded_String);
     Writes the value of the given unbounded string to the specified
     file, followed by a `New_Line'.  Similar to the effect of
     `Put_Line (To_String (U))' except that an extra copy is avoided.

In the above procedures, `File' is of type `Ada.Text_IO.File_Type' and
is optional.  If the parameter is omitted, then the standard input or
output file is referenced as appropriate.

   The package `Ada.Strings.Wide_Unbounded.Wide_Text_IO' in library
files `a-swuwti.ads' and `a-swuwti.adb' provides similar extended
`Wide_Text_IO' functionality for unbounded wide strings.

   The package `Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO' in
library files `a-szuzti.ads' and `a-szuzti.adb' provides similar
extended `Wide_Wide_Text_IO' functionality for unbounded wide wide
strings.


File: gnat_rm.info,  Node: Wide_Text_IO,  Next: Wide_Wide_Text_IO,  Prev: Text_IO,  Up: The Implementation of Standard I/O

9.6 Wide_Text_IO
================

`Wide_Text_IO' is similar in most respects to Text_IO, except that both
input and output files may contain special sequences that represent
wide character values.  The encoding scheme for a given file may be
specified using a FORM parameter:

     WCEM=X

as part of the FORM string (WCEM = wide character encoding method),
where X is one of the following characters

`h'
     Hex ESC encoding

`u'
     Upper half encoding

`s'
     Shift-JIS encoding

`e'
     EUC Encoding

`8'
     UTF-8 encoding

`b'
     Brackets encoding

The encoding methods match those that can be used in a source program,
but there is no requirement that the encoding method used for the
source program be the same as the encoding method used for files, and
different files may use different encoding methods.

   The default encoding method for the standard files, and for opened
files for which no WCEM parameter is given in the FORM string matches
the wide character encoding specified for the main program (the default
being brackets encoding if no coding method was specified with -gnatW).

Hex Coding
     In this encoding, a wide character is represented by a five
     character sequence:

          ESC a b c d

     where A, B, C, D are the four hexadecimal characters (using upper
     case letters) of the wide character code.  For example, ESC A345
     is used to represent the wide character with code 16#A345#.  This
     scheme is compatible with use of the full `Wide_Character' set.

Upper Half Coding
     The wide character with encoding 16#abcd#, where the upper bit is
     on (i.e. a is in the range 8-F) is represented as two bytes 16#ab#
     and 16#cd#.  The second byte may never be a format control
     character, but is not required to be in the upper half.  This
     method can be also used for shift-JIS or EUC where the internal
     coding matches the external coding.

Shift JIS Coding
     A wide character is represented by a two character sequence 16#ab#
     and 16#cd#, with the restrictions described for upper half
     encoding as described above.  The internal character code is the
     corresponding JIS character according to the standard algorithm
     for Shift-JIS conversion.  Only characters defined in the JIS code
     set table can be used with this encoding method.

EUC Coding
     A wide character is represented by a two character sequence 16#ab#
     and 16#cd#, with both characters being in the upper half.  The
     internal character code is the corresponding JIS character
     according to the EUC encoding algorithm.  Only characters defined
     in the JIS code set table can be used with this encoding method.

UTF-8 Coding
     A wide character is represented using UCS Transformation Format 8
     (UTF-8) as defined in Annex R of ISO 10646-1/Am.2.  Depending on
     the character value, the representation is a one, two, or three
     byte sequence:

          16#0000#-16#007f#: 2#0xxxxxxx#
          16#0080#-16#07ff#: 2#110xxxxx# 2#10xxxxxx#
          16#0800#-16#ffff#: 2#1110xxxx# 2#10xxxxxx# 2#10xxxxxx#

     where the XXX bits correspond to the left-padded bits of the
     16-bit character value.  Note that all lower half ASCII characters
     are represented as ASCII bytes and all upper half characters and
     other wide characters are represented as sequences of upper-half
     (The full UTF-8 scheme allows for encoding 31-bit characters as
     6-byte sequences, but in this implementation, all UTF-8 sequences
     of four or more bytes length will raise a Constraint_Error, as
     will all invalid UTF-8 sequences.)

Brackets Coding
     In this encoding, a wide character is represented by the following
     eight character sequence:

          [ " a b c d " ]

     where `a', `b', `c', `d' are the four hexadecimal characters
     (using uppercase letters) of the wide character code.  For
     example, `["A345"]' is used to represent the wide character with
     code `16#A345#'.  This scheme is compatible with use of the full
     Wide_Character set.  On input, brackets coding can also be used
     for upper half characters, e.g. `["C1"]' for lower case a.
     However, on output, brackets notation is only used for wide
     characters with a code greater than `16#FF#'.

     Note that brackets coding is not normally used in the context of
     Wide_Text_IO or Wide_Wide_Text_IO, since it is really just
     designed as a portable way of encoding source files. In the
     context of Wide_Text_IO or Wide_Wide_Text_IO, it can only be used
     if the file does not contain any instance of the left bracket
     character other than to encode wide character values using the
     brackets encoding method. In practice it is expected that some
     standard wide character encoding method such as UTF-8 will be used
     for text input output.

     If brackets notation is used, then any occurrence of a left bracket
     in the input file which is not the start of a valid wide character
     sequence will cause Constraint_Error to be raised. It is possible
     to encode a left bracket as ["5B"] and Wide_Text_IO and
     Wide_Wide_Text_IO input will interpret this as a left bracket.

     However, when a left bracket is output, it will be output as a
     left bracket and not as ["5B"]. We make this decision because for
     normal use of Wide_Text_IO for outputting messages, it is
     unpleasant to clobber left brackets. For example, if we write:

             Put_Line ("Start of output [first run]");

     we really do not want to have the left bracket in this message
     clobbered so that the output reads:

             Start of output ["5B"]first run]

     In practice brackets encoding is reasonably useful for normal
     Put_Line use since we won't get confused between left brackets and
     wide character sequences in the output. But for input, or when
     files are written out and read back in, it really makes better
     sense to use one of the standard encoding methods such as UTF-8.


For the coding schemes other than UTF-8, Hex, or Brackets encoding, not
all wide character values can be represented.  An attempt to output a
character that cannot be represented using the encoding scheme for the
file causes Constraint_Error to be raised.  An invalid wide character
sequence on input also causes Constraint_Error to be raised.

* Menu:

* Wide_Text_IO Stream Pointer Positioning::
* Wide_Text_IO Reading and Writing Non-Regular Files::


File: gnat_rm.info,  Node: Wide_Text_IO Stream Pointer Positioning,  Next: Wide_Text_IO Reading and Writing Non-Regular Files,  Up: Wide_Text_IO

9.6.1 Stream Pointer Positioning
--------------------------------

`Ada.Wide_Text_IO' is similar to `Ada.Text_IO' in its handling of
stream pointer positioning (*note Text_IO::).  There is one additional
case:

   If `Ada.Wide_Text_IO.Look_Ahead' reads a character outside the
normal lower ASCII set (i.e. a character in the range:

     Wide_Character'Val (16#0080#) .. Wide_Character'Val (16#FFFF#)

then although the logical position of the file pointer is unchanged by
the `Look_Ahead' call, the stream is physically positioned past the
wide character sequence.  Again this is to avoid the need for buffering
or backup, and all `Wide_Text_IO' routines check the internal
indication that this situation has occurred so that this is not visible
to a normal program using `Wide_Text_IO'.  However, this discrepancy
can be observed if the wide text file shares a stream with another file.


File: gnat_rm.info,  Node: Wide_Text_IO Reading and Writing Non-Regular Files,  Prev: Wide_Text_IO Stream Pointer Positioning,  Up: Wide_Text_IO

9.6.2 Reading and Writing Non-Regular Files
-------------------------------------------

As in the case of Text_IO, when a non-regular file is read, it is
assumed that the file contains no page marks (any form characters are
treated as data characters), and `End_Of_Page' always returns `False'.
Similarly, the end of file indication is not sticky, so it is possible
to read beyond an end of file.


File: gnat_rm.info,  Node: Wide_Wide_Text_IO,  Next: Stream_IO,  Prev: Wide_Text_IO,  Up: The Implementation of Standard I/O

9.7 Wide_Wide_Text_IO
=====================

`Wide_Wide_Text_IO' is similar in most respects to Text_IO, except that
both input and output files may contain special sequences that represent
wide wide character values.  The encoding scheme for a given file may be
specified using a FORM parameter:

     WCEM=X

as part of the FORM string (WCEM = wide character encoding method),
where X is one of the following characters

`h'
     Hex ESC encoding

`u'
     Upper half encoding

`s'
     Shift-JIS encoding

`e'
     EUC Encoding

`8'
     UTF-8 encoding

`b'
     Brackets encoding

The encoding methods match those that can be used in a source program,
but there is no requirement that the encoding method used for the
source program be the same as the encoding method used for files, and
different files may use different encoding methods.

   The default encoding method for the standard files, and for opened
files for which no WCEM parameter is given in the FORM string matches
the wide character encoding specified for the main program (the default
being brackets encoding if no coding method was specified with -gnatW).

UTF-8 Coding
     A wide character is represented using UCS Transformation Format 8
     (UTF-8) as defined in Annex R of ISO 10646-1/Am.2.  Depending on
     the character value, the representation is a one, two, three, or
     four byte sequence:

          16#000000#-16#00007f#: 2#0xxxxxxx#
          16#000080#-16#0007ff#: 2#110xxxxx# 2#10xxxxxx#
          16#000800#-16#00ffff#: 2#1110xxxx# 2#10xxxxxx# 2#10xxxxxx#
          16#010000#-16#10ffff#: 2#11110xxx# 2#10xxxxxx# 2#10xxxxxx# 2#10xxxxxx#

     where the XXX bits correspond to the left-padded bits of the
     21-bit character value.  Note that all lower half ASCII characters
     are represented as ASCII bytes and all upper half characters and
     other wide characters are represented as sequences of upper-half
     characters.

Brackets Coding
     In this encoding, a wide wide character is represented by the
     following eight character sequence if is in wide character range

          [ " a b c d " ]

     and by the following ten character sequence if not

          [ " a b c d e f " ]

     where `a', `b', `c', `d', `e', and `f' are the four or six
     hexadecimal characters (using uppercase letters) of the wide wide
     character code.  For example, `["01A345"]' is used to represent
     the wide wide character with code `16#01A345#'.

     This scheme is compatible with use of the full Wide_Wide_Character
     set.  On input, brackets coding can also be used for upper half
     characters, e.g. `["C1"]' for lower case a.  However, on output,
     brackets notation is only used for wide characters with a code
     greater than `16#FF#'.


If is also possible to use the other Wide_Character encoding methods,
such as Shift-JIS, but the other schemes cannot support the full range
of wide wide characters.  An attempt to output a character that cannot
be represented using the encoding scheme for the file causes
Constraint_Error to be raised.  An invalid wide character sequence on
input also causes Constraint_Error to be raised.

* Menu:

* Wide_Wide_Text_IO Stream Pointer Positioning::
* Wide_Wide_Text_IO Reading and Writing Non-Regular Files::


File: gnat_rm.info,  Node: Wide_Wide_Text_IO Stream Pointer Positioning,  Next: Wide_Wide_Text_IO Reading and Writing Non-Regular Files,  Up: Wide_Wide_Text_IO

9.7.1 Stream Pointer Positioning
--------------------------------

`Ada.Wide_Wide_Text_IO' is similar to `Ada.Text_IO' in its handling of
stream pointer positioning (*note Text_IO::).  There is one additional
case:

   If `Ada.Wide_Wide_Text_IO.Look_Ahead' reads a character outside the
normal lower ASCII set (i.e. a character in the range:

     Wide_Wide_Character'Val (16#0080#) .. Wide_Wide_Character'Val (16#10FFFF#)

then although the logical position of the file pointer is unchanged by
the `Look_Ahead' call, the stream is physically positioned past the
wide character sequence.  Again this is to avoid the need for buffering
or backup, and all `Wide_Wide_Text_IO' routines check the internal
indication that this situation has occurred so that this is not visible
to a normal program using `Wide_Wide_Text_IO'.  However, this
discrepancy can be observed if the wide text file shares a stream with
another file.


File: gnat_rm.info,  Node: Wide_Wide_Text_IO Reading and Writing Non-Regular Files,  Prev: Wide_Wide_Text_IO Stream Pointer Positioning,  Up: Wide_Wide_Text_IO

9.7.2 Reading and Writing Non-Regular Files
-------------------------------------------

As in the case of Text_IO, when a non-regular file is read, it is
assumed that the file contains no page marks (any form characters are
treated as data characters), and `End_Of_Page' always returns `False'.
Similarly, the end of file indication is not sticky, so it is possible
to read beyond an end of file.


File: gnat_rm.info,  Node: Stream_IO,  Next: Text Translation,  Prev: Wide_Wide_Text_IO,  Up: The Implementation of Standard I/O

9.8 Stream_IO
=============

A stream file is a sequence of bytes, where individual elements are
written to the file as described in the Ada Reference Manual.  The type
`Stream_Element' is simply a byte.  There are two ways to read or write
a stream file.

   * The operations `Read' and `Write' directly read or write a
     sequence of stream elements with no control information.

   * The stream attributes applied to a stream file transfer data in the
     manner described for stream attributes.


File: gnat_rm.info,  Node: Text Translation,  Next: Shared Files,  Prev: Stream_IO,  Up: The Implementation of Standard I/O

9.9 Text Translation
====================

`Text_Translation=XXX' may be used as the Form parameter passed to
Text_IO.Create and Text_IO.Open: `Text_Translation=YES' is the default,
which means to translate LF to/from CR/LF on Windows systems.
`Text_Translation=NO' disables this translation; i.e. it uses binary
mode. For output files, `Text_Translation=NO' may be used to create
Unix-style files on Windows. `Text_Translation=XXX' has no effect on
Unix systems.


File: gnat_rm.info,  Node: Shared Files,  Next: Filenames encoding,  Prev: Text Translation,  Up: The Implementation of Standard I/O

9.10 Shared Files
=================

Section A.14 of the Ada Reference Manual allows implementations to
provide a wide variety of behavior if an attempt is made to access the
same external file with two or more internal files.

   To provide a full range of functionality, while at the same time
minimizing the problems of portability caused by this implementation
dependence, GNAT handles file sharing as follows:

   * In the absence of a `shared=XXX' form parameter, an attempt to
     open two or more files with the same full name is considered an
     error and is not supported.  The exception `Use_Error' will be
     raised.  Note that a file that is not explicitly closed by the
     program remains open until the program terminates.

   * If the form parameter `shared=no' appears in the form string, the
     file can be opened or created with its own separate stream
     identifier, regardless of whether other files sharing the same
     external file are opened.  The exact effect depends on how the C
     stream routines handle multiple accesses to the same external
     files using separate streams.

   * If the form parameter `shared=yes' appears in the form string for
     each of two or more files opened using the same full name, the same
     stream is shared between these files, and the semantics are as
     described in Ada Reference Manual, Section A.14.

When a program that opens multiple files with the same name is ported
from another Ada compiler to GNAT, the effect will be that `Use_Error'
is raised.

   The documentation of the original compiler and the documentation of
the program should then be examined to determine if file sharing was
expected, and `shared=XXX' parameters added to `Open' and `Create'
calls as required.

   When a program is ported from GNAT to some other Ada compiler, no
special attention is required unless the `shared=XXX' form parameter is
used in the program.  In this case, you must examine the documentation
of the new compiler to see if it supports the required file sharing
semantics, and form strings modified appropriately.  Of course it may
be the case that the program cannot be ported if the target compiler
does not support the required functionality.  The best approach in
writing portable code is to avoid file sharing (and hence the use of
the `shared=XXX' parameter in the form string) completely.

   One common use of file sharing in Ada 83 is the use of
instantiations of Sequential_IO on the same file with different types,
to achieve heterogeneous input-output.  Although this approach will
work in GNAT if `shared=yes' is specified, it is preferable in Ada to
use Stream_IO for this purpose (using the stream attributes)


File: gnat_rm.info,  Node: Filenames encoding,  Next: Open Modes,  Prev: Shared Files,  Up: The Implementation of Standard I/O

9.11 Filenames encoding
=======================

An encoding form parameter can be used to specify the filename encoding
`encoding=XXX'.

   * If the form parameter `encoding=utf8' appears in the form string,
     the filename must be encoded in UTF-8.

   * If the form parameter `encoding=8bits' appears in the form string,
     the filename must be a standard 8bits string.

   In the absence of a `encoding=XXX' form parameter, the encoding is
controlled by the `GNAT_CODE_PAGE' environment variable. And if not set
`utf8' is assumed.

`CP_ACP'
     The current system Windows ANSI code page.

`CP_UTF8'
     UTF-8 encoding

   This encoding form parameter is only supported on the Windows
platform. On the other Operating Systems the run-time is supporting
UTF-8 natively.


File: gnat_rm.info,  Node: Open Modes,  Next: Operations on C Streams,  Prev: Filenames encoding,  Up: The Implementation of Standard I/O

9.12 Open Modes
===============

`Open' and `Create' calls result in a call to `fopen' using the mode
shown in the following table:



                    `Open' and `Create' Call Modes
                                    OPEN            CREATE
     Append_File                    "r+"             "w+"
     In_File                        "r"              "w+"
     Out_File (Direct_IO)           "r+"             "w"
     Out_File (all other cases)     "w"              "w"
     Inout_File                     "r+"             "w+"

If text file translation is required, then either `b' or `t' is added
to the mode, depending on the setting of Text.  Text file translation
refers to the mapping of CR/LF sequences in an external file to LF
characters internally.  This mapping only occurs in DOS and DOS-like
systems, and is not relevant to other systems.

   A special case occurs with Stream_IO.  As shown in the above table,
the file is initially opened in `r' or `w' mode for the `In_File' and
`Out_File' cases.  If a `Set_Mode' operation subsequently requires
switching from reading to writing or vice-versa, then the file is
reopened in `r+' mode to permit the required operation.


File: gnat_rm.info,  Node: Operations on C Streams,  Next: Interfacing to C Streams,  Prev: Open Modes,  Up: The Implementation of Standard I/O

9.13 Operations on C Streams
============================

The package `Interfaces.C_Streams' provides an Ada program with direct
access to the C library functions for operations on C streams:

     package Interfaces.C_Streams is
       -- Note: the reason we do not use the types that are in
       -- Interfaces.C is that we want to avoid dragging in the
       -- code in this unit if possible.
       subtype chars is System.Address;
       -- Pointer to null-terminated array of characters
       subtype FILEs is System.Address;
       -- Corresponds to the C type FILE*
       subtype voids is System.Address;
       -- Corresponds to the C type void*
       subtype int is Integer;
       subtype long is Long_Integer;
       -- Note: the above types are subtypes deliberately, and it
       -- is part of this spec that the above correspondences are
       -- guaranteed.  This means that it is legitimate to, for
       -- example, use Integer instead of int.  We provide these
       -- synonyms for clarity, but in some cases it may be
       -- convenient to use the underlying types (for example to
       -- avoid an unnecessary dependency of a spec on the spec
       -- of this unit).
       type size_t is mod 2 ** Standard'Address_Size;
       NULL_Stream : constant FILEs;
       -- Value returned (NULL in C) to indicate an
       -- fdopen/fopen/tmpfile error
       ----------------------------------
       -- Constants Defined in stdio.h --
       ----------------------------------
       EOF : constant int;
       -- Used by a number of routines to indicate error or
       -- end of file
       IOFBF : constant int;
       IOLBF : constant int;
       IONBF : constant int;
       -- Used to indicate buffering mode for setvbuf call
       SEEK_CUR : constant int;
       SEEK_END : constant int;
       SEEK_SET : constant int;
       -- Used to indicate origin for fseek call
       function stdin return FILEs;
       function stdout return FILEs;
       function stderr return FILEs;
       -- Streams associated with standard files
       --------------------------
       -- Standard C functions --
       --------------------------
       -- The functions selected below are ones that are
       -- available in UNIX (but not necessarily in ANSI C).
       -- These are very thin interfaces
       -- which copy exactly the C headers.  For more
       -- documentation on these functions, see the Microsoft C
       -- "Run-Time Library Reference" (Microsoft Press, 1990,
       -- ISBN 1-55615-225-6), which includes useful information
       -- on system compatibility.
       procedure clearerr (stream : FILEs);
       function fclose (stream : FILEs) return int;
       function fdopen (handle : int; mode : chars) return FILEs;
       function feof (stream : FILEs) return int;
       function ferror (stream : FILEs) return int;
       function fflush (stream : FILEs) return int;
       function fgetc (stream : FILEs) return int;
       function fgets (strng : chars; n : int; stream : FILEs)
           return chars;
       function fileno (stream : FILEs) return int;
       function fopen (filename : chars; Mode : chars)
           return FILEs;
       -- Note: to maintain target independence, use
       -- text_translation_required, a boolean variable defined in
       -- a-sysdep.c to deal with the target dependent text
       -- translation requirement.  If this variable is set,
       -- then  b/t should be appended to the standard mode
       -- argument to set the text translation mode off or on
       -- as required.
       function fputc (C : int; stream : FILEs) return int;
       function fputs (Strng : chars; Stream : FILEs) return int;
       function fread
          (buffer : voids;
           size : size_t;
           count : size_t;
           stream : FILEs)
           return size_t;
       function freopen
          (filename : chars;
           mode : chars;
           stream : FILEs)
           return FILEs;
       function fseek
          (stream : FILEs;
           offset : long;
           origin : int)
           return int;
       function ftell (stream : FILEs) return long;
       function fwrite
          (buffer : voids;
           size : size_t;
           count : size_t;
           stream : FILEs)
           return size_t;
       function isatty (handle : int) return int;
       procedure mktemp (template : chars);
       -- The return value (which is just a pointer to template)
       -- is discarded
       procedure rewind (stream : FILEs);
       function rmtmp return int;
       function setvbuf
          (stream : FILEs;
           buffer : chars;
           mode : int;
           size : size_t)
           return int;

       function tmpfile return FILEs;
       function ungetc (c : int; stream : FILEs) return int;
       function unlink (filename : chars) return int;
       ---------------------
       -- Extra functions --
       ---------------------
       -- These functions supply slightly thicker bindings than
       -- those above.  They are derived from functions in the
       -- C Run-Time Library, but may do a bit more work than
       -- just directly calling one of the Library functions.
       function is_regular_file (handle : int) return int;
       -- Tests if given handle is for a regular file (result 1)
       -- or for a non-regular file (pipe or device, result 0).
       ---------------------------------
       -- Control of Text/Binary Mode --
       ---------------------------------
       -- If text_translation_required is true, then the following
       -- functions may be used to dynamically switch a file from
       -- binary to text mode or vice versa.  These functions have
       -- no effect if text_translation_required is false (i.e. in
       -- normal UNIX mode).  Use fileno to get a stream handle.
       procedure set_binary_mode (handle : int);
       procedure set_text_mode (handle : int);
       ----------------------------
       -- Full Path Name support --
       ----------------------------
       procedure full_name (nam : chars; buffer : chars);
       -- Given a NUL terminated string representing a file
       -- name, returns in buffer a NUL terminated string
       -- representing the full path name for the file name.
       -- On systems where it is relevant the   drive is also
       -- part of the full path name.  It is the responsibility
       -- of the caller to pass an actual parameter for buffer
       -- that is big enough for any full path name.  Use
       -- max_path_len given below as the size of buffer.
       max_path_len : integer;
       -- Maximum length of an allowable full path name on the
       -- system, including a terminating NUL character.
     end Interfaces.C_Streams;


File: gnat_rm.info,  Node: Interfacing to C Streams,  Prev: Operations on C Streams,  Up: The Implementation of Standard I/O

9.14 Interfacing to C Streams
=============================

The packages in this section permit interfacing Ada files to C Stream
operations.

      with Interfaces.C_Streams;
      package Ada.Sequential_IO.C_Streams is
         function C_Stream (F : File_Type)
            return Interfaces.C_Streams.FILEs;
         procedure Open
           (File : in out File_Type;
            Mode : in File_Mode;
            C_Stream : in Interfaces.C_Streams.FILEs;
            Form : in String := "");
      end Ada.Sequential_IO.C_Streams;

       with Interfaces.C_Streams;
       package Ada.Direct_IO.C_Streams is
          function C_Stream (F : File_Type)
             return Interfaces.C_Streams.FILEs;
          procedure Open
            (File : in out File_Type;
             Mode : in File_Mode;
             C_Stream : in Interfaces.C_Streams.FILEs;
             Form : in String := "");
       end Ada.Direct_IO.C_Streams;

       with Interfaces.C_Streams;
       package Ada.Text_IO.C_Streams is
          function C_Stream (F : File_Type)
             return Interfaces.C_Streams.FILEs;
          procedure Open
            (File : in out File_Type;
             Mode : in File_Mode;
             C_Stream : in Interfaces.C_Streams.FILEs;
             Form : in String := "");
       end Ada.Text_IO.C_Streams;

       with Interfaces.C_Streams;
       package Ada.Wide_Text_IO.C_Streams is
          function C_Stream (F : File_Type)
             return Interfaces.C_Streams.FILEs;
          procedure Open
            (File : in out File_Type;
             Mode : in File_Mode;
             C_Stream : in Interfaces.C_Streams.FILEs;
             Form : in String := "");
      end Ada.Wide_Text_IO.C_Streams;

       with Interfaces.C_Streams;
       package Ada.Wide_Wide_Text_IO.C_Streams is
          function C_Stream (F : File_Type)
             return Interfaces.C_Streams.FILEs;
          procedure Open
            (File : in out File_Type;
             Mode : in File_Mode;
             C_Stream : in Interfaces.C_Streams.FILEs;
             Form : in String := "");
      end Ada.Wide_Wide_Text_IO.C_Streams;

      with Interfaces.C_Streams;
      package Ada.Stream_IO.C_Streams is
         function C_Stream (F : File_Type)
            return Interfaces.C_Streams.FILEs;
         procedure Open
           (File : in out File_Type;
            Mode : in File_Mode;
            C_Stream : in Interfaces.C_Streams.FILEs;
            Form : in String := "");
      end Ada.Stream_IO.C_Streams;

In each of these six packages, the `C_Stream' function obtains the
`FILE' pointer from a currently opened Ada file.  It is then possible
to use the `Interfaces.C_Streams' package to operate on this stream, or
the stream can be passed to a C program which can operate on it
directly.  Of course the program is responsible for ensuring that only
appropriate sequences of operations are executed.

   One particular use of relevance to an Ada program is that the
`setvbuf' function can be used to control the buffering of the stream
used by an Ada file.  In the absence of such a call the standard
default buffering is used.

   The `Open' procedures in these packages open a file giving an
existing C Stream instead of a file name.  Typically this stream is
imported from a C program, allowing an Ada file to operate on an
existing C file.


File: gnat_rm.info,  Node: The GNAT Library,  Next: Interfacing to Other Languages,  Prev: The Implementation of Standard I/O,  Up: Top

10 The GNAT Library
*******************

The GNAT library contains a number of general and special purpose
packages.  It represents functionality that the GNAT developers have
found useful, and which is made available to GNAT users.  The packages
described here are fully supported, and upwards compatibility will be
maintained in future releases, so you can use these facilities with the
confidence that the same functionality will be available in future
releases.

   The chapter here simply gives a brief summary of the facilities
available.  The full documentation is found in the spec file for the
package.  The full sources of these library packages, including both
spec and body, are provided with all GNAT releases.  For example, to
find out the full specifications of the SPITBOL pattern matching
capability, including a full tutorial and extensive examples, look in
the `g-spipat.ads' file in the library.

   For each entry here, the package name (as it would appear in a `with'
clause) is given, followed by the name of the corresponding spec file in
parentheses.  The packages are children in four hierarchies, `Ada',
`Interfaces', `System', and `GNAT', the latter being a GNAT-specific
hierarchy.

   Note that an application program should only use packages in one of
these four hierarchies if the package is defined in the Ada Reference
Manual, or is listed in this section of the GNAT Programmers Reference
Manual.  All other units should be considered internal implementation
units and should not be directly `with''ed by application code.  The
use of a `with' statement that references one of these internal
implementation units makes an application potentially dependent on
changes in versions of GNAT, and will generate a warning message.

* Menu:

* Ada.Characters.Latin_9 (a-chlat9.ads)::
* Ada.Characters.Wide_Latin_1 (a-cwila1.ads)::
* Ada.Characters.Wide_Latin_9 (a-cwila9.ads)::
* Ada.Characters.Wide_Wide_Latin_1 (a-chzla1.ads)::
* Ada.Characters.Wide_Wide_Latin_9 (a-chzla9.ads)::
* Ada.Containers.Formal_Doubly_Linked_Lists (a-cfdlli.ads)::
* Ada.Containers.Formal_Hashed_Maps (a-cfhama.ads)::
* Ada.Containers.Formal_Hashed_Sets (a-cfhase.ads)::
* Ada.Containers.Formal_Ordered_Maps (a-cforma.ads)::
* Ada.Containers.Formal_Ordered_Sets (a-cforse.ads)::
* Ada.Containers.Formal_Vectors (a-cofove.ads)::
* Ada.Command_Line.Environment (a-colien.ads)::
* Ada.Command_Line.Remove (a-colire.ads)::
* Ada.Command_Line.Response_File (a-clrefi.ads)::
* Ada.Direct_IO.C_Streams (a-diocst.ads)::
* Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads)::
* Ada.Exceptions.Last_Chance_Handler (a-elchha.ads)::
* Ada.Exceptions.Traceback (a-exctra.ads)::
* Ada.Sequential_IO.C_Streams (a-siocst.ads)::
* Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads)::
* Ada.Strings.Unbounded.Text_IO (a-suteio.ads)::
* Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads)::
* Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads)::
* Ada.Text_IO.C_Streams (a-tiocst.ads)::
* Ada.Text_IO.Reset_Standard_Files (a-tirsfi.ads)::
* Ada.Wide_Characters.Unicode (a-wichun.ads)::
* Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads)::
* Ada.Wide_Text_IO.Reset_Standard_Files (a-wrstfi.ads)::
* Ada.Wide_Wide_Characters.Unicode (a-zchuni.ads)::
* Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads)::
* Ada.Wide_Wide_Text_IO.Reset_Standard_Files (a-zrstfi.ads)::
* GNAT.Altivec (g-altive.ads)::
* GNAT.Altivec.Conversions (g-altcon.ads)::
* GNAT.Altivec.Vector_Operations (g-alveop.ads)::
* GNAT.Altivec.Vector_Types (g-alvety.ads)::
* GNAT.Altivec.Vector_Views (g-alvevi.ads)::
* GNAT.Array_Split (g-arrspl.ads)::
* GNAT.AWK (g-awk.ads)::
* GNAT.Bounded_Buffers (g-boubuf.ads)::
* GNAT.Bounded_Mailboxes (g-boumai.ads)::
* GNAT.Bubble_Sort (g-bubsor.ads)::
* GNAT.Bubble_Sort_A (g-busora.ads)::
* GNAT.Bubble_Sort_G (g-busorg.ads)::
* GNAT.Byte_Order_Mark (g-byorma.ads)::
* GNAT.Byte_Swapping (g-bytswa.ads)::
* GNAT.Calendar (g-calend.ads)::
* GNAT.Calendar.Time_IO (g-catiio.ads)::
* GNAT.Case_Util (g-casuti.ads)::
* GNAT.CGI (g-cgi.ads)::
* GNAT.CGI.Cookie (g-cgicoo.ads)::
* GNAT.CGI.Debug (g-cgideb.ads)::
* GNAT.Command_Line (g-comlin.ads)::
* GNAT.Compiler_Version (g-comver.ads)::
* GNAT.Ctrl_C (g-ctrl_c.ads)::
* GNAT.CRC32 (g-crc32.ads)::
* GNAT.Current_Exception (g-curexc.ads)::
* GNAT.Debug_Pools (g-debpoo.ads)::
* GNAT.Debug_Utilities (g-debuti.ads)::
* GNAT.Decode_String (g-decstr.ads)::
* GNAT.Decode_UTF8_String (g-deutst.ads)::
* GNAT.Directory_Operations (g-dirope.ads)::
* GNAT.Directory_Operations.Iteration (g-diopit.ads)::
* GNAT.Dynamic_HTables (g-dynhta.ads)::
* GNAT.Dynamic_Tables (g-dyntab.ads)::
* GNAT.Encode_String (g-encstr.ads)::
* GNAT.Encode_UTF8_String (g-enutst.ads)::
* GNAT.Exception_Actions (g-excact.ads)::
* GNAT.Exception_Traces (g-exctra.ads)::
* GNAT.Exceptions (g-except.ads)::
* GNAT.Expect (g-expect.ads)::
* GNAT.Expect.TTY (g-exptty.ads)::
* GNAT.Float_Control (g-flocon.ads)::
* GNAT.Heap_Sort (g-heasor.ads)::
* GNAT.Heap_Sort_A (g-hesora.ads)::
* GNAT.Heap_Sort_G (g-hesorg.ads)::
* GNAT.HTable (g-htable.ads)::
* GNAT.IO (g-io.ads)::
* GNAT.IO_Aux (g-io_aux.ads)::
* GNAT.Lock_Files (g-locfil.ads)::
* GNAT.MBBS_Discrete_Random (g-mbdira.ads)::
* GNAT.MBBS_Float_Random (g-mbflra.ads)::
* GNAT.MD5 (g-md5.ads)::
* GNAT.Memory_Dump (g-memdum.ads)::
* GNAT.Most_Recent_Exception (g-moreex.ads)::
* GNAT.OS_Lib (g-os_lib.ads)::
* GNAT.Perfect_Hash_Generators (g-pehage.ads)::
* GNAT.Random_Numbers (g-rannum.ads)::
* GNAT.Regexp (g-regexp.ads)::
* GNAT.Registry (g-regist.ads)::
* GNAT.Regpat (g-regpat.ads)::
* GNAT.Secondary_Stack_Info (g-sestin.ads)::
* GNAT.Semaphores (g-semaph.ads)::
* GNAT.Serial_Communications (g-sercom.ads)::
* GNAT.SHA1 (g-sha1.ads)::
* GNAT.SHA224 (g-sha224.ads)::
* GNAT.SHA256 (g-sha256.ads)::
* GNAT.SHA384 (g-sha384.ads)::
* GNAT.SHA512 (g-sha512.ads)::
* GNAT.Signals (g-signal.ads)::
* GNAT.Sockets (g-socket.ads)::
* GNAT.Source_Info (g-souinf.ads)::
* GNAT.Spelling_Checker (g-speche.ads)::
* GNAT.Spelling_Checker_Generic (g-spchge.ads)::
* GNAT.Spitbol.Patterns (g-spipat.ads)::
* GNAT.Spitbol (g-spitbo.ads)::
* GNAT.Spitbol.Table_Boolean (g-sptabo.ads)::
* GNAT.Spitbol.Table_Integer (g-sptain.ads)::
* GNAT.Spitbol.Table_VString (g-sptavs.ads)::
* GNAT.SSE (g-sse.ads)::
* GNAT.SSE.Vector_Types (g-ssvety.ads)::
* GNAT.Strings (g-string.ads)::
* GNAT.String_Split (g-strspl.ads)::
* GNAT.Table (g-table.ads)::
* GNAT.Task_Lock (g-tasloc.ads)::
* GNAT.Threads (g-thread.ads)::
* GNAT.Time_Stamp (g-timsta.ads)::
* GNAT.Traceback (g-traceb.ads)::
* GNAT.Traceback.Symbolic (g-trasym.ads)::
* GNAT.UTF_32 (g-utf_32.ads)::
* GNAT.UTF_32_Spelling_Checker (g-u3spch.ads)::
* GNAT.Wide_Spelling_Checker (g-wispch.ads)::
* GNAT.Wide_String_Split (g-wistsp.ads)::
* GNAT.Wide_Wide_Spelling_Checker (g-zspche.ads)::
* GNAT.Wide_Wide_String_Split (g-zistsp.ads)::
* Interfaces.C.Extensions (i-cexten.ads)::
* Interfaces.C.Streams (i-cstrea.ads)::
* Interfaces.CPP (i-cpp.ads)::
* Interfaces.Packed_Decimal (i-pacdec.ads)::
* Interfaces.VxWorks (i-vxwork.ads)::
* Interfaces.VxWorks.IO (i-vxwoio.ads)::
* System.Address_Image (s-addima.ads)::
* System.Assertions (s-assert.ads)::
* System.Memory (s-memory.ads)::
* System.Partition_Interface (s-parint.ads)::
* System.Pool_Global (s-pooglo.ads)::
* System.Pool_Local (s-pooloc.ads)::
* System.Restrictions (s-restri.ads)::
* System.Rident (s-rident.ads)::
* System.Strings.Stream_Ops (s-ststop.ads)::
* System.Task_Info (s-tasinf.ads)::
* System.Wch_Cnv (s-wchcnv.ads)::
* System.Wch_Con (s-wchcon.ads)::


File: gnat_rm.info,  Node: Ada.Characters.Latin_9 (a-chlat9.ads),  Next: Ada.Characters.Wide_Latin_1 (a-cwila1.ads),  Up: The GNAT Library

10.1 `Ada.Characters.Latin_9' (`a-chlat9.ads')
==============================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the RM-defined package
`Ada.Characters.Latin_1' but with the few modifications required for
`Latin-9' The provision of such a package is specifically authorized by
the Ada Reference Manual (RM A.3.3(27)).


File: gnat_rm.info,  Node: Ada.Characters.Wide_Latin_1 (a-cwila1.ads),  Next: Ada.Characters.Wide_Latin_9 (a-cwila9.ads),  Prev: Ada.Characters.Latin_9 (a-chlat9.ads),  Up: The GNAT Library

10.2 `Ada.Characters.Wide_Latin_1' (`a-cwila1.ads')
===================================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the RM-defined package
`Ada.Characters.Latin_1' but with the types of the constants being
`Wide_Character' instead of `Character'.  The provision of such a
package is specifically authorized by the Ada Reference Manual (RM
A.3.3(27)).


File: gnat_rm.info,  Node: Ada.Characters.Wide_Latin_9 (a-cwila9.ads),  Next: Ada.Characters.Wide_Wide_Latin_1 (a-chzla1.ads),  Prev: Ada.Characters.Wide_Latin_1 (a-cwila1.ads),  Up: The GNAT Library

10.3 `Ada.Characters.Wide_Latin_9' (`a-cwila1.ads')
===================================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the GNAT defined package
`Ada.Characters.Latin_9' but with the types of the constants being
`Wide_Character' instead of `Character'.  The provision of such a
package is specifically authorized by the Ada Reference Manual (RM
A.3.3(27)).


File: gnat_rm.info,  Node: Ada.Characters.Wide_Wide_Latin_1 (a-chzla1.ads),  Next: Ada.Characters.Wide_Wide_Latin_9 (a-chzla9.ads),  Prev: Ada.Characters.Wide_Latin_9 (a-cwila9.ads),  Up: The GNAT Library

10.4 `Ada.Characters.Wide_Wide_Latin_1' (`a-chzla1.ads')
========================================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the RM-defined package
`Ada.Characters.Latin_1' but with the types of the constants being
`Wide_Wide_Character' instead of `Character'.  The provision of such a
package is specifically authorized by the Ada Reference Manual (RM
A.3.3(27)).


File: gnat_rm.info,  Node: Ada.Characters.Wide_Wide_Latin_9 (a-chzla9.ads),  Next: Ada.Containers.Formal_Doubly_Linked_Lists (a-cfdlli.ads),  Prev: Ada.Characters.Wide_Wide_Latin_1 (a-chzla1.ads),  Up: The GNAT Library

10.5 `Ada.Characters.Wide_Wide_Latin_9' (`a-chzla9.ads')
========================================================

This child of `Ada.Characters' provides a set of definitions
corresponding to those in the GNAT defined package
`Ada.Characters.Latin_9' but with the types of the constants being
`Wide_Wide_Character' instead of `Character'.  The provision of such a
package is specifically authorized by the Ada Reference Manual (RM
A.3.3(27)).


File: gnat_rm.info,  Node: Ada.Containers.Formal_Doubly_Linked_Lists (a-cfdlli.ads),  Next: Ada.Containers.Formal_Hashed_Maps (a-cfhama.ads),  Prev: Ada.Characters.Wide_Wide_Latin_9 (a-chzla9.ads),  Up: The GNAT Library

10.6 `Ada.Containers.Formal_Doubly_Linked_Lists' (`a-cfdlli.ads')
=================================================================

This child of `Ada.Containers' defines a modified version of the Ada
2005 container for doubly linked lists, meant to facilitate formal
verification of code using such containers.


File: gnat_rm.info,  Node: Ada.Containers.Formal_Hashed_Maps (a-cfhama.ads),  Next: Ada.Containers.Formal_Hashed_Sets (a-cfhase.ads),  Prev: Ada.Containers.Formal_Doubly_Linked_Lists (a-cfdlli.ads),  Up: The GNAT Library

10.7 `Ada.Containers.Formal_Hashed_Maps' (`a-cfhama.ads')
=========================================================

This child of `Ada.Containers' defines a modified version of the Ada
2005 container for hashed maps, meant to facilitate formal verification
of code using such containers.


File: gnat_rm.info,  Node: Ada.Containers.Formal_Hashed_Sets (a-cfhase.ads),  Next: Ada.Containers.Formal_Ordered_Maps (a-cforma.ads),  Prev: Ada.Containers.Formal_Hashed_Maps (a-cfhama.ads),  Up: The GNAT Library

10.8 `Ada.Containers.Formal_Hashed_Sets' (`a-cfhase.ads')
=========================================================

This child of `Ada.Containers' defines a modified version of the Ada
2005 container for hashed sets, meant to facilitate formal verification
of code using such containers.


File: gnat_rm.info,  Node: Ada.Containers.Formal_Ordered_Maps (a-cforma.ads),  Next: Ada.Containers.Formal_Ordered_Sets (a-cforse.ads),  Prev: Ada.Containers.Formal_Hashed_Sets (a-cfhase.ads),  Up: The GNAT Library

10.9 `Ada.Containers.Formal_Ordered_Maps' (`a-cforma.ads')
==========================================================

This child of `Ada.Containers' defines a modified version of the Ada
2005 container for ordered maps, meant to facilitate formal
verification of code using such containers.


File: gnat_rm.info,  Node: Ada.Containers.Formal_Ordered_Sets (a-cforse.ads),  Next: Ada.Containers.Formal_Vectors (a-cofove.ads),  Prev: Ada.Containers.Formal_Ordered_Maps (a-cforma.ads),  Up: The GNAT Library

10.10 `Ada.Containers.Formal_Ordered_Sets' (`a-cforse.ads')
===========================================================

This child of `Ada.Containers' defines a modified version of the Ada
2005 container for ordered sets, meant to facilitate formal
verification of code using such containers.


File: gnat_rm.info,  Node: Ada.Containers.Formal_Vectors (a-cofove.ads),  Next: Ada.Command_Line.Environment (a-colien.ads),  Prev: Ada.Containers.Formal_Ordered_Sets (a-cforse.ads),  Up: The GNAT Library

10.11 `Ada.Containers.Formal_Vectors' (`a-cofove.ads')
======================================================

This child of `Ada.Containers' defines a modified version of the Ada
2005 container for vectors, meant to facilitate formal verification of
code using such containers.


File: gnat_rm.info,  Node: Ada.Command_Line.Environment (a-colien.ads),  Next: Ada.Command_Line.Remove (a-colire.ads),  Prev: Ada.Containers.Formal_Vectors (a-cofove.ads),  Up: The GNAT Library

10.12 `Ada.Command_Line.Environment' (`a-colien.ads')
=====================================================

This child of `Ada.Command_Line' provides a mechanism for obtaining
environment values on systems where this concept makes sense.


File: gnat_rm.info,  Node: Ada.Command_Line.Remove (a-colire.ads),  Next: Ada.Command_Line.Response_File (a-clrefi.ads),  Prev: Ada.Command_Line.Environment (a-colien.ads),  Up: The GNAT Library

10.13 `Ada.Command_Line.Remove' (`a-colire.ads')
================================================

This child of `Ada.Command_Line' provides a mechanism for logically
removing arguments from the argument list.  Once removed, an argument
is not visible to further calls on the subprograms in
`Ada.Command_Line' will not see the removed argument.


File: gnat_rm.info,  Node: Ada.Command_Line.Response_File (a-clrefi.ads),  Next: Ada.Direct_IO.C_Streams (a-diocst.ads),  Prev: Ada.Command_Line.Remove (a-colire.ads),  Up: The GNAT Library

10.14 `Ada.Command_Line.Response_File' (`a-clrefi.ads')
=======================================================

This child of `Ada.Command_Line' provides a mechanism facilities for
getting command line arguments from a text file, called a "response
file".  Using a response file allow passing a set of arguments to an
executable longer than the maximum allowed by the system on the command
line.


File: gnat_rm.info,  Node: Ada.Direct_IO.C_Streams (a-diocst.ads),  Next: Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads),  Prev: Ada.Command_Line.Response_File (a-clrefi.ads),  Up: The GNAT Library

10.15 `Ada.Direct_IO.C_Streams' (`a-diocst.ads')
================================================

This package provides subprograms that allow interfacing between C
streams and `Direct_IO'.  The stream identifier can be extracted from a
file opened on the Ada side, and an Ada file can be constructed from a
stream opened on the C side.


File: gnat_rm.info,  Node: Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads),  Next: Ada.Exceptions.Last_Chance_Handler (a-elchha.ads),  Prev: Ada.Direct_IO.C_Streams (a-diocst.ads),  Up: The GNAT Library

10.16 `Ada.Exceptions.Is_Null_Occurrence' (`a-einuoc.ads')
==========================================================

This child subprogram provides a way of testing for the null exception
occurrence (`Null_Occurrence') without raising an exception.


File: gnat_rm.info,  Node: Ada.Exceptions.Last_Chance_Handler (a-elchha.ads),  Next: Ada.Exceptions.Traceback (a-exctra.ads),  Prev: Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads),  Up: The GNAT Library

10.17 `Ada.Exceptions.Last_Chance_Handler' (`a-elchha.ads')
===========================================================

This child subprogram is used for handling otherwise unhandled
exceptions (hence the name last chance), and perform clean ups before
terminating the program. Note that this subprogram never returns.


File: gnat_rm.info,  Node: Ada.Exceptions.Traceback (a-exctra.ads),  Next: Ada.Sequential_IO.C_Streams (a-siocst.ads),  Prev: Ada.Exceptions.Last_Chance_Handler (a-elchha.ads),  Up: The GNAT Library

10.18 `Ada.Exceptions.Traceback' (`a-exctra.ads')
=================================================

This child package provides the subprogram (`Tracebacks') to give a
traceback array of addresses based on an exception occurrence.


File: gnat_rm.info,  Node: Ada.Sequential_IO.C_Streams (a-siocst.ads),  Next: Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads),  Prev: Ada.Exceptions.Traceback (a-exctra.ads),  Up: The GNAT Library

10.19 `Ada.Sequential_IO.C_Streams' (`a-siocst.ads')
====================================================

This package provides subprograms that allow interfacing between C
streams and `Sequential_IO'.  The stream identifier can be extracted
from a file opened on the Ada side, and an Ada file can be constructed
from a stream opened on the C side.


File: gnat_rm.info,  Node: Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads),  Next: Ada.Strings.Unbounded.Text_IO (a-suteio.ads),  Prev: Ada.Sequential_IO.C_Streams (a-siocst.ads),  Up: The GNAT Library

10.20 `Ada.Streams.Stream_IO.C_Streams' (`a-ssicst.ads')
========================================================

This package provides subprograms that allow interfacing between C
streams and `Stream_IO'.  The stream identifier can be extracted from a
file opened on the Ada side, and an Ada file can be constructed from a
stream opened on the C side.


File: gnat_rm.info,  Node: Ada.Strings.Unbounded.Text_IO (a-suteio.ads),  Next: Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads),  Prev: Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads),  Up: The GNAT Library

10.21 `Ada.Strings.Unbounded.Text_IO' (`a-suteio.ads')
======================================================

This package provides subprograms for Text_IO for unbounded strings,
avoiding the necessity for an intermediate operation with ordinary
strings.


File: gnat_rm.info,  Node: Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads),  Next: Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads),  Prev: Ada.Strings.Unbounded.Text_IO (a-suteio.ads),  Up: The GNAT Library

10.22 `Ada.Strings.Wide_Unbounded.Wide_Text_IO' (`a-swuwti.ads')
================================================================

This package provides subprograms for Text_IO for unbounded wide
strings, avoiding the necessity for an intermediate operation with
ordinary wide strings.


File: gnat_rm.info,  Node: Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads),  Next: Ada.Text_IO.C_Streams (a-tiocst.ads),  Prev: Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads),  Up: The GNAT Library

10.23 `Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO' (`a-szuzti.ads')
==========================================================================

This package provides subprograms for Text_IO for unbounded wide wide
strings, avoiding the necessity for an intermediate operation with
ordinary wide wide strings.


File: gnat_rm.info,  Node: Ada.Text_IO.C_Streams (a-tiocst.ads),  Next: Ada.Text_IO.Reset_Standard_Files (a-tirsfi.ads),  Prev: Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads),  Up: The GNAT Library

10.24 `Ada.Text_IO.C_Streams' (`a-tiocst.ads')
==============================================

This package provides subprograms that allow interfacing between C
streams and `Text_IO'.  The stream identifier can be extracted from a
file opened on the Ada side, and an Ada file can be constructed from a
stream opened on the C side.


File: gnat_rm.info,  Node: Ada.Text_IO.Reset_Standard_Files (a-tirsfi.ads),  Next: Ada.Wide_Characters.Unicode (a-wichun.ads),  Prev: Ada.Text_IO.C_Streams (a-tiocst.ads),  Up: The GNAT Library

10.25 `Ada.Text_IO.Reset_Standard_Files' (`a-tirsfi.ads')
=========================================================

This procedure is used to reset the status of the standard files used
by Ada.Text_IO.  This is useful in a situation (such as a restart in an
embedded application) where the status of the files may change during
execution (for example a standard input file may be redefined to be
interactive).


File: gnat_rm.info,  Node: Ada.Wide_Characters.Unicode (a-wichun.ads),  Next: Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads),  Prev: Ada.Text_IO.Reset_Standard_Files (a-tirsfi.ads),  Up: The GNAT Library

10.26 `Ada.Wide_Characters.Unicode' (`a-wichun.ads')
====================================================

This package provides subprograms that allow categorization of
Wide_Character values according to Unicode categories.


File: gnat_rm.info,  Node: Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads),  Next: Ada.Wide_Text_IO.Reset_Standard_Files (a-wrstfi.ads),  Prev: Ada.Wide_Characters.Unicode (a-wichun.ads),  Up: The GNAT Library

10.27 `Ada.Wide_Text_IO.C_Streams' (`a-wtcstr.ads')
===================================================

This package provides subprograms that allow interfacing between C
streams and `Wide_Text_IO'.  The stream identifier can be extracted
from a file opened on the Ada side, and an Ada file can be constructed
from a stream opened on the C side.


File: gnat_rm.info,  Node: Ada.Wide_Text_IO.Reset_Standard_Files (a-wrstfi.ads),  Next: Ada.Wide_Wide_Characters.Unicode (a-zchuni.ads),  Prev: Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads),  Up: The GNAT Library

10.28 `Ada.Wide_Text_IO.Reset_Standard_Files' (`a-wrstfi.ads')
==============================================================

This procedure is used to reset the status of the standard files used
by Ada.Wide_Text_IO.  This is useful in a situation (such as a restart
in an embedded application) where the status of the files may change
during execution (for example a standard input file may be redefined to
be interactive).


File: gnat_rm.info,  Node: Ada.Wide_Wide_Characters.Unicode (a-zchuni.ads),  Next: Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads),  Prev: Ada.Wide_Text_IO.Reset_Standard_Files (a-wrstfi.ads),  Up: The GNAT Library

10.29 `Ada.Wide_Wide_Characters.Unicode' (`a-zchuni.ads')
=========================================================

This package provides subprograms that allow categorization of
Wide_Wide_Character values according to Unicode categories.


File: gnat_rm.info,  Node: Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads),  Next: Ada.Wide_Wide_Text_IO.Reset_Standard_Files (a-zrstfi.ads),  Prev: Ada.Wide_Wide_Characters.Unicode (a-zchuni.ads),  Up: The GNAT Library

10.30 `Ada.Wide_Wide_Text_IO.C_Streams' (`a-ztcstr.ads')
========================================================

This package provides subprograms that allow interfacing between C
streams and `Wide_Wide_Text_IO'.  The stream identifier can be
extracted from a file opened on the Ada side, and an Ada file can be
constructed from a stream opened on the C side.


File: gnat_rm.info,  Node: Ada.Wide_Wide_Text_IO.Reset_Standard_Files (a-zrstfi.ads),  Next: GNAT.Altivec (g-altive.ads),  Prev: Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads),  Up: The GNAT Library

10.31 `Ada.Wide_Wide_Text_IO.Reset_Standard_Files' (`a-zrstfi.ads')
===================================================================

This procedure is used to reset the status of the standard files used
by Ada.Wide_Wide_Text_IO. This is useful in a situation (such as a
restart in an embedded application) where the status of the files may
change during execution (for example a standard input file may be
redefined to be interactive).


File: gnat_rm.info,  Node: GNAT.Altivec (g-altive.ads),  Next: GNAT.Altivec.Conversions (g-altcon.ads),  Prev: Ada.Wide_Wide_Text_IO.Reset_Standard_Files (a-zrstfi.ads),  Up: The GNAT Library

10.32 `GNAT.Altivec' (`g-altive.ads')
=====================================

This is the root package of the GNAT AltiVec binding. It provides
definitions of constants and types common to all the versions of the
binding.


File: gnat_rm.info,  Node: GNAT.Altivec.Conversions (g-altcon.ads),  Next: GNAT.Altivec.Vector_Operations (g-alveop.ads),  Prev: GNAT.Altivec (g-altive.ads),  Up: The GNAT Library

10.33 `GNAT.Altivec.Conversions' (`g-altcon.ads')
=================================================

This package provides the Vector/View conversion routines.


File: gnat_rm.info,  Node: GNAT.Altivec.Vector_Operations (g-alveop.ads),  Next: GNAT.Altivec.Vector_Types (g-alvety.ads),  Prev: GNAT.Altivec.Conversions (g-altcon.ads),  Up: The GNAT Library

10.34 `GNAT.Altivec.Vector_Operations' (`g-alveop.ads')
=======================================================

This package exposes the Ada interface to the AltiVec operations on
vector objects. A soft emulation is included by default in the GNAT
library. The hard binding is provided as a separate package. This unit
is common to both bindings.


File: gnat_rm.info,  Node: GNAT.Altivec.Vector_Types (g-alvety.ads),  Next: GNAT.Altivec.Vector_Views (g-alvevi.ads),  Prev: GNAT.Altivec.Vector_Operations (g-alveop.ads),  Up: The GNAT Library

10.35 `GNAT.Altivec.Vector_Types' (`g-alvety.ads')
==================================================

This package exposes the various vector types part of the Ada binding
to AltiVec facilities.


File: gnat_rm.info,  Node: GNAT.Altivec.Vector_Views (g-alvevi.ads),  Next: GNAT.Array_Split (g-arrspl.ads),  Prev: GNAT.Altivec.Vector_Types (g-alvety.ads),  Up: The GNAT Library

10.36 `GNAT.Altivec.Vector_Views' (`g-alvevi.ads')
==================================================

This package provides public 'View' data types from/to which private
vector representations can be converted via GNAT.Altivec.Conversions.
This allows convenient access to individual vector elements and
provides a simple way to initialize vector objects.


File: gnat_rm.info,  Node: GNAT.Array_Split (g-arrspl.ads),  Next: GNAT.AWK (g-awk.ads),  Prev: GNAT.Altivec.Vector_Views (g-alvevi.ads),  Up: The GNAT Library

10.37 `GNAT.Array_Split' (`g-arrspl.ads')
=========================================

Useful array-manipulation routines: given a set of separators, split an
array wherever the separators appear, and provide direct access to the
resulting slices.


File: gnat_rm.info,  Node: GNAT.AWK (g-awk.ads),  Next: GNAT.Bounded_Buffers (g-boubuf.ads),  Prev: GNAT.Array_Split (g-arrspl.ads),  Up: The GNAT Library

10.38 `GNAT.AWK' (`g-awk.ads')
==============================

Provides AWK-like parsing functions, with an easy interface for parsing
one or more files containing formatted data.  The file is viewed as a
database where each record is a line and a field is a data element in
this line.


File: gnat_rm.info,  Node: GNAT.Bounded_Buffers (g-boubuf.ads),  Next: GNAT.Bounded_Mailboxes (g-boumai.ads),  Prev: GNAT.AWK (g-awk.ads),  Up: The GNAT Library

10.39 `GNAT.Bounded_Buffers' (`g-boubuf.ads')
=============================================

Provides a concurrent generic bounded buffer abstraction.  Instances are
useful directly or as parts of the implementations of other
abstractions, such as mailboxes.


File: gnat_rm.info,  Node: GNAT.Bounded_Mailboxes (g-boumai.ads),  Next: GNAT.Bubble_Sort (g-bubsor.ads),  Prev: GNAT.Bounded_Buffers (g-boubuf.ads),  Up: The GNAT Library

10.40 `GNAT.Bounded_Mailboxes' (`g-boumai.ads')
===============================================

Provides a thread-safe asynchronous intertask mailbox communication
facility.


File: gnat_rm.info,  Node: GNAT.Bubble_Sort (g-bubsor.ads),  Next: GNAT.Bubble_Sort_A (g-busora.ads),  Prev: GNAT.Bounded_Mailboxes (g-boumai.ads),  Up: The GNAT Library

10.41 `GNAT.Bubble_Sort' (`g-bubsor.ads')
=========================================

Provides a general implementation of bubble sort usable for sorting
arbitrary data items.  Exchange and comparison procedures are provided
by passing access-to-procedure values.


File: gnat_rm.info,  Node: GNAT.Bubble_Sort_A (g-busora.ads),  Next: GNAT.Bubble_Sort_G (g-busorg.ads),  Prev: GNAT.Bubble_Sort (g-bubsor.ads),  Up: The GNAT Library

10.42 `GNAT.Bubble_Sort_A' (`g-busora.ads')
===========================================

Provides a general implementation of bubble sort usable for sorting
arbitrary data items.  Move and comparison procedures are provided by
passing access-to-procedure values. This is an older version, retained
for compatibility. Usually `GNAT.Bubble_Sort' will be preferable.


File: gnat_rm.info,  Node: GNAT.Bubble_Sort_G (g-busorg.ads),  Next: GNAT.Byte_Order_Mark (g-byorma.ads),  Prev: GNAT.Bubble_Sort_A (g-busora.ads),  Up: The GNAT Library

10.43 `GNAT.Bubble_Sort_G' (`g-busorg.ads')
===========================================

Similar to `Bubble_Sort_A' except that the move and sorting procedures
are provided as generic parameters, this improves efficiency, especially
if the procedures can be inlined, at the expense of duplicating code for
multiple instantiations.


File: gnat_rm.info,  Node: GNAT.Byte_Order_Mark (g-byorma.ads),  Next: GNAT.Byte_Swapping (g-bytswa.ads),  Prev: GNAT.Bubble_Sort_G (g-busorg.ads),  Up: The GNAT Library

10.44 `GNAT.Byte_Order_Mark' (`g-byorma.ads')
=============================================

Provides a routine which given a string, reads the start of the string
to see whether it is one of the standard byte order marks (BOM's) which
signal the encoding of the string. The routine includes detection of
special XML sequences for various UCS input formats.


File: gnat_rm.info,  Node: GNAT.Byte_Swapping (g-bytswa.ads),  Next: GNAT.Calendar (g-calend.ads),  Prev: GNAT.Byte_Order_Mark (g-byorma.ads),  Up: The GNAT Library

10.45 `GNAT.Byte_Swapping' (`g-bytswa.ads')
===========================================

General routines for swapping the bytes in 2-, 4-, and 8-byte
quantities.  Machine-specific implementations are available in some
cases.


File: gnat_rm.info,  Node: GNAT.Calendar (g-calend.ads),  Next: GNAT.Calendar.Time_IO (g-catiio.ads),  Prev: GNAT.Byte_Swapping (g-bytswa.ads),  Up: The GNAT Library

10.46 `GNAT.Calendar' (`g-calend.ads')
======================================

Extends the facilities provided by `Ada.Calendar' to include handling
of days of the week, an extended `Split' and `Time_Of' capability.
Also provides conversion of `Ada.Calendar.Time' values to and from the
C `timeval' format.


File: gnat_rm.info,  Node: GNAT.Calendar.Time_IO (g-catiio.ads),  Next: GNAT.Case_Util (g-casuti.ads),  Prev: GNAT.Calendar (g-calend.ads),  Up: The GNAT Library

10.47 `GNAT.Calendar.Time_IO' (`g-catiio.ads')
==============================================


File: gnat_rm.info,  Node: GNAT.CRC32 (g-crc32.ads),  Next: GNAT.Current_Exception (g-curexc.ads),  Prev: GNAT.Ctrl_C (g-ctrl_c.ads),  Up: The GNAT Library

10.48 `GNAT.CRC32' (`g-crc32.ads')
==================================

This package implements the CRC-32 algorithm.  For a full description
of this algorithm see "Computation of Cyclic Redundancy Checks via
Table Look-Up", `Communications of the ACM', Vol. 31 No. 8, pp.
1008-1013, Aug. 1988.  Sarwate, D.V.


File: gnat_rm.info,  Node: GNAT.Case_Util (g-casuti.ads),  Next: GNAT.CGI (g-cgi.ads),  Prev: GNAT.Calendar.Time_IO (g-catiio.ads),  Up: The GNAT Library

10.49 `GNAT.Case_Util' (`g-casuti.ads')
=======================================

A set of simple routines for handling upper and lower casing of strings
without the overhead of the full casing tables in
`Ada.Characters.Handling'.


File: gnat_rm.info,  Node: GNAT.CGI (g-cgi.ads),  Next: GNAT.CGI.Cookie (g-cgicoo.ads),  Prev: GNAT.Case_Util (g-casuti.ads),  Up: The GNAT Library

10.50 `GNAT.CGI' (`g-cgi.ads')
==============================

This is a package for interfacing a GNAT program with a Web server via
the Common Gateway Interface (CGI).  Basically this package parses the
CGI parameters, which are a set of key/value pairs sent by the Web
server.  It builds a table whose index is the key and provides some
services to deal with this table.


File: gnat_rm.info,  Node: GNAT.CGI.Cookie (g-cgicoo.ads),  Next: GNAT.CGI.Debug (g-cgideb.ads),  Prev: GNAT.CGI (g-cgi.ads),  Up: The GNAT Library

10.51 `GNAT.CGI.Cookie' (`g-cgicoo.ads')
========================================

This is a package to interface a GNAT program with a Web server via the
Common Gateway Interface (CGI).  It exports services to deal with Web
cookies (piece of information kept in the Web client software).


File: gnat_rm.info,  Node: GNAT.CGI.Debug (g-cgideb.ads),  Next: GNAT.Command_Line (g-comlin.ads),  Prev: GNAT.CGI.Cookie (g-cgicoo.ads),  Up: The GNAT Library

10.52 `GNAT.CGI.Debug' (`g-cgideb.ads')
=======================================

This is a package to help debugging CGI (Common Gateway Interface)
programs written in Ada.


File: gnat_rm.info,  Node: GNAT.Command_Line (g-comlin.ads),  Next: GNAT.Compiler_Version (g-comver.ads),  Prev: GNAT.CGI.Debug (g-cgideb.ads),  Up: The GNAT Library

10.53 `GNAT.Command_Line' (`g-comlin.ads')
==========================================

Provides a high level interface to `Ada.Command_Line' facilities,
including the ability to scan for named switches with optional
parameters and expand file names using wild card notations.


File: gnat_rm.info,  Node: GNAT.Compiler_Version (g-comver.ads),  Next: GNAT.Ctrl_C (g-ctrl_c.ads),  Prev: GNAT.Command_Line (g-comlin.ads),  Up: The GNAT Library

10.54 `GNAT.Compiler_Version' (`g-comver.ads')
==============================================

Provides a routine for obtaining the version of the compiler used to
compile the program. More accurately this is the version of the binder
used to bind the program (this will normally be the same as the version
of the compiler if a consistent tool set is used to compile all units
of a partition).


File: gnat_rm.info,  Node: GNAT.Ctrl_C (g-ctrl_c.ads),  Next: GNAT.CRC32 (g-crc32.ads),  Prev: GNAT.Compiler_Version (g-comver.ads),  Up: The GNAT Library

10.55 `GNAT.Ctrl_C' (`g-ctrl_c.ads')
====================================

Provides a simple interface to handle Ctrl-C keyboard events.


File: gnat_rm.info,  Node: GNAT.Current_Exception (g-curexc.ads),  Next: GNAT.Debug_Pools (g-debpoo.ads),  Prev: GNAT.CRC32 (g-crc32.ads),  Up: The GNAT Library

10.56 `GNAT.Current_Exception' (`g-curexc.ads')
===============================================

Provides access to information on the current exception that has been
raised without the need for using the Ada 95 / Ada 2005 exception
choice parameter specification syntax.  This is particularly useful in
simulating typical facilities for obtaining information about
exceptions provided by Ada 83 compilers.


File: gnat_rm.info,  Node: GNAT.Debug_Pools (g-debpoo.ads),  Next: GNAT.Debug_Utilities (g-debuti.ads),  Prev: GNAT.Current_Exception (g-curexc.ads),  Up: The GNAT Library

10.57 `GNAT.Debug_Pools' (`g-debpoo.ads')
=========================================

Provide a debugging storage pools that helps tracking memory corruption
problems.  *Note The GNAT Debug Pool Facility: (gnat_ugn)The GNAT Debug
Pool Facility.


File: gnat_rm.info,  Node: GNAT.Debug_Utilities (g-debuti.ads),  Next: GNAT.Decode_String (g-decstr.ads),  Prev: GNAT.Debug_Pools (g-debpoo.ads),  Up: The GNAT Library

10.58 `GNAT.Debug_Utilities' (`g-debuti.ads')
=============================================

Provides a few useful utilities for debugging purposes, including
conversion to and from string images of address values. Supports both C
and Ada formats for hexadecimal literals.


File: gnat_rm.info,  Node: GNAT.Decode_String (g-decstr.ads),  Next: GNAT.Decode_UTF8_String (g-deutst.ads),  Prev: GNAT.Debug_Utilities (g-debuti.ads),  Up: The GNAT Library

10.59 `GNAT.Decode_String' (`g-decstr.ads')
===========================================

A generic package providing routines for decoding wide character and
wide wide character strings encoded as sequences of 8-bit characters
using a specified encoding method. Includes validation routines, and
also routines for stepping to next or previous encoded character in an
encoded string.  Useful in conjunction with Unicode character coding.
Note there is a preinstantiation for UTF-8. See next entry.


File: gnat_rm.info,  Node: GNAT.Decode_UTF8_String (g-deutst.ads),  Next: GNAT.Directory_Operations (g-dirope.ads),  Prev: GNAT.Decode_String (g-decstr.ads),  Up: The GNAT Library

10.60 `GNAT.Decode_UTF8_String' (`g-deutst.ads')
================================================

A preinstantiation of GNAT.Decode_Strings for UTF-8 encoding.


File: gnat_rm.info,  Node: GNAT.Directory_Operations (g-dirope.ads),  Next: GNAT.Directory_Operations.Iteration (g-diopit.ads),  Prev: GNAT.Decode_UTF8_String (g-deutst.ads),  Up: The GNAT Library

10.61 `GNAT.Directory_Operations' (`g-dirope.ads')
==================================================

Provides a set of routines for manipulating directories, including
changing the current directory, making new directories, and scanning
the files in a directory.


File: gnat_rm.info,  Node: GNAT.Directory_Operations.Iteration (g-diopit.ads),  Next: GNAT.Dynamic_HTables (g-dynhta.ads),  Prev: GNAT.Directory_Operations (g-dirope.ads),  Up: The GNAT Library

10.62 `GNAT.Directory_Operations.Iteration' (`g-diopit.ads')
============================================================

A child unit of GNAT.Directory_Operations providing additional
operations for iterating through directories.


File: gnat_rm.info,  Node: GNAT.Dynamic_HTables (g-dynhta.ads),  Next: GNAT.Dynamic_Tables (g-dyntab.ads),  Prev: GNAT.Directory_Operations.Iteration (g-diopit.ads),  Up: The GNAT Library

10.63 `GNAT.Dynamic_HTables' (`g-dynhta.ads')
=============================================

A generic implementation of hash tables that can be used to hash
arbitrary data.  Provided in two forms, a simple form with built in
hash functions, and a more complex form in which the hash function is
supplied.

This package provides a facility similar to that of `GNAT.HTable',
except that this package declares a type that can be used to define
dynamic instances of the hash table, while an instantiation of
`GNAT.HTable' creates a single instance of the hash table.


File: gnat_rm.info,  Node: GNAT.Dynamic_Tables (g-dyntab.ads),  Next: GNAT.Encode_String (g-encstr.ads),  Prev: GNAT.Dynamic_HTables (g-dynhta.ads),  Up: The GNAT Library

10.64 `GNAT.Dynamic_Tables' (`g-dyntab.ads')
============================================

A generic package providing a single dimension array abstraction where
the length of the array can be dynamically modified.

This package provides a facility similar to that of `GNAT.Table',
except that this package declares a type that can be used to define
dynamic instances of the table, while an instantiation of `GNAT.Table'
creates a single instance of the table type.


File: gnat_rm.info,  Node: GNAT.Encode_String (g-encstr.ads),  Next: GNAT.Encode_UTF8_String (g-enutst.ads),  Prev: GNAT.Dynamic_Tables (g-dyntab.ads),  Up: The GNAT Library

10.65 `GNAT.Encode_String' (`g-encstr.ads')
===========================================

A generic package providing routines for encoding wide character and
wide wide character strings as sequences of 8-bit characters using a
specified encoding method. Useful in conjunction with Unicode character
coding.  Note there is a preinstantiation for UTF-8. See next entry.


File: gnat_rm.info,  Node: GNAT.Encode_UTF8_String (g-enutst.ads),  Next: GNAT.Exception_Actions (g-excact.ads),  Prev: GNAT.Encode_String (g-encstr.ads),  Up: The GNAT Library

10.66 `GNAT.Encode_UTF8_String' (`g-enutst.ads')
================================================

A preinstantiation of GNAT.Encode_Strings for UTF-8 encoding.


File: gnat_rm.info,  Node: GNAT.Exception_Actions (g-excact.ads),  Next: GNAT.Exception_Traces (g-exctra.ads),  Prev: GNAT.Encode_UTF8_String (g-enutst.ads),  Up: The GNAT Library

10.67 `GNAT.Exception_Actions' (`g-excact.ads')
===============================================

Provides callbacks when an exception is raised. Callbacks can be
registered for specific exceptions, or when any exception is raised.
This can be used for instance to force a core dump to ease debugging.


File: gnat_rm.info,  Node: GNAT.Exception_Traces (g-exctra.ads),  Next: GNAT.Exceptions (g-except.ads),  Prev: GNAT.Exception_Actions (g-excact.ads),  Up: The GNAT Library

10.68 `GNAT.Exception_Traces' (`g-exctra.ads')
==============================================

Provides an interface allowing to control automatic output upon
exception occurrences.


File: gnat_rm.info,  Node: GNAT.Exceptions (g-except.ads),  Next: GNAT.Expect (g-expect.ads),  Prev: GNAT.Exception_Traces (g-exctra.ads),  Up: The GNAT Library

10.69 `GNAT.Exceptions' (`g-expect.ads')
========================================

Normally it is not possible to raise an exception with a message from a
subprogram in a pure package, since the necessary types and subprograms
are in `Ada.Exceptions' which is not a pure unit. `GNAT.Exceptions'
provides a facility for getting around this limitation for a few
predefined exceptions, and for example allow raising `Constraint_Error'
with a message from a pure subprogram.


File: gnat_rm.info,  Node: GNAT.Expect (g-expect.ads),  Next: GNAT.Expect.TTY (g-exptty.ads),  Prev: GNAT.Exceptions (g-except.ads),  Up: The GNAT Library

10.70 `GNAT.Expect' (`g-expect.ads')
====================================

Provides a set of subprograms similar to what is available with the
standard Tcl Expect tool.  It allows you to easily spawn and
communicate with an external process.  You can send commands or inputs
to the process, and compare the output with some expected regular
expression. Currently `GNAT.Expect' is implemented on all native GNAT
ports except for OpenVMS.  It is not implemented for cross ports, and
in particular is not implemented for VxWorks or LynxOS.


File: gnat_rm.info,  Node: GNAT.Expect.TTY (g-exptty.ads),  Next: GNAT.Float_Control (g-flocon.ads),  Prev: GNAT.Expect (g-expect.ads),  Up: The GNAT Library

10.71 `GNAT.Expect.TTY' (`g-exptty.ads')
========================================

As GNAT.Expect but using pseudo-terminal.  Currently `GNAT.Expect.TTY'
is implemented on all native GNAT ports except for OpenVMS. It is not
implemented for cross ports, and in particular is not implemented for
VxWorks or LynxOS.


File: gnat_rm.info,  Node: GNAT.Float_Control (g-flocon.ads),  Next: GNAT.Heap_Sort (g-heasor.ads),  Prev: GNAT.Expect.TTY (g-exptty.ads),  Up: The GNAT Library

10.72 `GNAT.Float_Control' (`g-flocon.ads')
===========================================

Provides an interface for resetting the floating-point processor into
the mode required for correct semantic operation in Ada.  Some third
party library calls may cause this mode to be modified, and the Reset
procedure in this package can be used to reestablish the required mode.


File: gnat_rm.info,  Node: GNAT.Heap_Sort (g-heasor.ads),  Next: GNAT.Heap_Sort_A (g-hesora.ads),  Prev: GNAT.Float_Control (g-flocon.ads),  Up: The GNAT Library

10.73 `GNAT.Heap_Sort' (`g-heasor.ads')
=======================================

Provides a general implementation of heap sort usable for sorting
arbitrary data items. Exchange and comparison procedures are provided
by passing access-to-procedure values.  The algorithm used is a
modified heap sort that performs approximately N*log(N) comparisons in
the worst case.


File: gnat_rm.info,  Node: GNAT.Heap_Sort_A (g-hesora.ads),  Next: GNAT.Heap_Sort_G (g-hesorg.ads),  Prev: GNAT.Heap_Sort (g-heasor.ads),  Up: The GNAT Library

10.74 `GNAT.Heap_Sort_A' (`g-hesora.ads')
=========================================

Provides a general implementation of heap sort usable for sorting
arbitrary data items. Move and comparison procedures are provided by
passing access-to-procedure values.  The algorithm used is a modified
heap sort that performs approximately N*log(N) comparisons in the worst
case.  This differs from `GNAT.Heap_Sort' in having a less convenient
interface, but may be slightly more efficient.


File: gnat_rm.info,  Node: GNAT.Heap_Sort_G (g-hesorg.ads),  Next: GNAT.HTable (g-htable.ads),  Prev: GNAT.Heap_Sort_A (g-hesora.ads),  Up: The GNAT Library

10.75 `GNAT.Heap_Sort_G' (`g-hesorg.ads')
=========================================

Similar to `Heap_Sort_A' except that the move and sorting procedures
are provided as generic parameters, this improves efficiency, especially
if the procedures can be inlined, at the expense of duplicating code for
multiple instantiations.


File: gnat_rm.info,  Node: GNAT.HTable (g-htable.ads),  Next: GNAT.IO (g-io.ads),  Prev: GNAT.Heap_Sort_G (g-hesorg.ads),  Up: The GNAT Library

10.76 `GNAT.HTable' (`g-htable.ads')
====================================

A generic implementation of hash tables that can be used to hash
arbitrary data.  Provides two approaches, one a simple static approach,
and the other allowing arbitrary dynamic hash tables.


File: gnat_rm.info,  Node: GNAT.IO (g-io.ads),  Next: GNAT.IO_Aux (g-io_aux.ads),  Prev: GNAT.HTable (g-htable.ads),  Up: The GNAT Library

10.77 `GNAT.IO' (`g-io.ads')
============================

A simple preelaborable input-output package that provides a subset of
simple Text_IO functions for reading characters and strings from
Standard_Input, and writing characters, strings and integers to either
Standard_Output or Standard_Error.


File: gnat_rm.info,  Node: GNAT.IO_Aux (g-io_aux.ads),  Next: GNAT.Lock_Files (g-locfil.ads),  Prev: GNAT.IO (g-io.ads),  Up: The GNAT Library

10.78 `GNAT.IO_Aux' (`g-io_aux.ads')
====================================

Provides some auxiliary functions for use with Text_IO, including a test
for whether a file exists, and functions for reading a line of text.


File: gnat_rm.info,  Node: GNAT.Lock_Files (g-locfil.ads),  Next: GNAT.MBBS_Discrete_Random (g-mbdira.ads),  Prev: GNAT.IO_Aux (g-io_aux.ads),  Up: The GNAT Library

10.79 `GNAT.Lock_Files' (`g-locfil.ads')
========================================

Provides a general interface for using files as locks.  Can be used for
providing program level synchronization.


File: gnat_rm.info,  Node: GNAT.MBBS_Discrete_Random (g-mbdira.ads),  Next: GNAT.MBBS_Float_Random (g-mbflra.ads),  Prev: GNAT.Lock_Files (g-locfil.ads),  Up: The GNAT Library

10.80 `GNAT.MBBS_Discrete_Random' (`g-mbdira.ads')
==================================================

The original implementation of `Ada.Numerics.Discrete_Random'.  Uses a
modified version of the Blum-Blum-Shub generator.


File: gnat_rm.info,  Node: GNAT.MBBS_Float_Random (g-mbflra.ads),  Next: GNAT.MD5 (g-md5.ads),  Prev: GNAT.MBBS_Discrete_Random (g-mbdira.ads),  Up: The GNAT Library

10.81 `GNAT.MBBS_Float_Random' (`g-mbflra.ads')
===============================================

The original implementation of `Ada.Numerics.Float_Random'.  Uses a
modified version of the Blum-Blum-Shub generator.


File: gnat_rm.info,  Node: GNAT.MD5 (g-md5.ads),  Next: GNAT.Memory_Dump (g-memdum.ads),  Prev: GNAT.MBBS_Float_Random (g-mbflra.ads),  Up: The GNAT Library

10.82 `GNAT.MD5' (`g-md5.ads')
==============================

Implements the MD5 Message-Digest Algorithm as described in RFC 1321.


File: gnat_rm.info,  Node: GNAT.Memory_Dump (g-memdum.ads),  Next: GNAT.Most_Recent_Exception (g-moreex.ads),  Prev: GNAT.MD5 (g-md5.ads),  Up: The GNAT Library

10.83 `GNAT.Memory_Dump' (`g-memdum.ads')
=========================================

Provides a convenient routine for dumping raw memory to either the
standard output or standard error files. Uses GNAT.IO for actual output.


File: gnat_rm.info,  Node: GNAT.Most_Recent_Exception (g-moreex.ads),  Next: GNAT.OS_Lib (g-os_lib.ads),  Prev: GNAT.Memory_Dump (g-memdum.ads),  Up: The GNAT Library

10.84 `GNAT.Most_Recent_Exception' (`g-moreex.ads')
===================================================

Provides access to the most recently raised exception.  Can be used for
various logging purposes, including duplicating functionality of some
Ada 83 implementation dependent extensions.


File: gnat_rm.info,  Node: GNAT.OS_Lib (g-os_lib.ads),  Next: GNAT.Perfect_Hash_Generators (g-pehage.ads),  Prev: GNAT.Most_Recent_Exception (g-moreex.ads),  Up: The GNAT Library

10.85 `GNAT.OS_Lib' (`g-os_lib.ads')
====================================

Provides a range of target independent operating system interface
functions, including time/date management, file operations, subprocess
management, including a portable spawn procedure, and access to
environment variables and error return codes.


File: gnat_rm.info,  Node: GNAT.Perfect_Hash_Generators (g-pehage.ads),  Next: GNAT.Random_Numbers (g-rannum.ads),  Prev: GNAT.OS_Lib (g-os_lib.ads),  Up: The GNAT Library

10.86 `GNAT.Perfect_Hash_Generators' (`g-pehage.ads')
=====================================================

Provides a generator of static minimal perfect hash functions. No
collisions occur and each item can be retrieved from the table in one
probe (perfect property). The hash table size corresponds to the exact
size of the key set and no larger (minimal property). The key set has to
be know in advance (static property). The hash functions are also order
preserving. If w2 is inserted after w1 in the generator, their hashcode
are in the same order. These hashing functions are very convenient for
use with realtime applications.


File: gnat_rm.info,  Node: GNAT.Random_Numbers (g-rannum.ads),  Next: GNAT.Regexp (g-regexp.ads),  Prev: GNAT.Perfect_Hash_Generators (g-pehage.ads),  Up: The GNAT Library

10.87 `GNAT.Random_Numbers' (`g-rannum.ads')
============================================

Provides random number capabilities which extend those available in the
standard Ada library and are more convenient to use.


File: gnat_rm.info,  Node: GNAT.Regexp (g-regexp.ads),  Next: GNAT.Registry (g-regist.ads),  Prev: GNAT.Random_Numbers (g-rannum.ads),  Up: The GNAT Library

10.88 `GNAT.Regexp' (`g-regexp.ads')
====================================

A simple implementation of regular expressions, using a subset of
regular expression syntax copied from familiar Unix style utilities.
This is the simples of the three pattern matching packages provided,
and is particularly suitable for "file globbing" applications.


File: gnat_rm.info,  Node: GNAT.Registry (g-regist.ads),  Next: GNAT.Regpat (g-regpat.ads),  Prev: GNAT.Regexp (g-regexp.ads),  Up: The GNAT Library

10.89 `GNAT.Registry' (`g-regist.ads')
======================================

This is a high level binding to the Windows registry.  It is possible to
do simple things like reading a key value, creating a new key.  For full
registry API, but at a lower level of abstraction, refer to the
Win32.Winreg package provided with the Win32Ada binding


File: gnat_rm.info,  Node: GNAT.Regpat (g-regpat.ads),  Next: GNAT.Secondary_Stack_Info (g-sestin.ads),  Prev: GNAT.Registry (g-regist.ads),  Up: The GNAT Library

10.90 `GNAT.Regpat' (`g-regpat.ads')
====================================

A complete implementation of Unix-style regular expression matching,
copied from the original V7 style regular expression library written in
C by Henry Spencer (and binary compatible with this C library).


File: gnat_rm.info,  Node: GNAT.Secondary_Stack_Info (g-sestin.ads),  Next: GNAT.Semaphores (g-semaph.ads),  Prev: GNAT.Regpat (g-regpat.ads),  Up: The GNAT Library

10.91 `GNAT.Secondary_Stack_Info' (`g-sestin.ads')
==================================================

Provide the capability to query the high water mark of the current
task's secondary stack.


File: gnat_rm.info,  Node: GNAT.Semaphores (g-semaph.ads),  Next: GNAT.Serial_Communications (g-sercom.ads),  Prev: GNAT.Secondary_Stack_Info (g-sestin.ads),  Up: The GNAT Library

10.92 `GNAT.Semaphores' (`g-semaph.ads')
========================================

Provides classic counting and binary semaphores using protected types.


File: gnat_rm.info,  Node: GNAT.Serial_Communications (g-sercom.ads),  Next: GNAT.SHA1 (g-sha1.ads),  Prev: GNAT.Semaphores (g-semaph.ads),  Up: The GNAT Library

10.93 `GNAT.Serial_Communications' (`g-sercom.ads')
===================================================

Provides a simple interface to send and receive data over a serial
port. This is only supported on GNU/Linux and Windows.


File: gnat_rm.info,  Node: GNAT.SHA1 (g-sha1.ads),  Next: GNAT.SHA224 (g-sha224.ads),  Prev: GNAT.Serial_Communications (g-sercom.ads),  Up: The GNAT Library

10.94 `GNAT.SHA1' (`g-sha1.ads')
================================

Implements the SHA-1 Secure Hash Algorithm as described in FIPS PUB
180-3 and RFC 3174.


File: gnat_rm.info,  Node: GNAT.SHA224 (g-sha224.ads),  Next: GNAT.SHA256 (g-sha256.ads),  Prev: GNAT.SHA1 (g-sha1.ads),  Up: The GNAT Library

10.95 `GNAT.SHA224' (`g-sha224.ads')
====================================

Implements the SHA-224 Secure Hash Algorithm as described in FIPS PUB
180-3.


File: gnat_rm.info,  Node: GNAT.SHA256 (g-sha256.ads),  Next: GNAT.SHA384 (g-sha384.ads),  Prev: GNAT.SHA224 (g-sha224.ads),  Up: The GNAT Library

10.96 `GNAT.SHA256' (`g-sha256.ads')
====================================

Implements the SHA-256 Secure Hash Algorithm as described in FIPS PUB
180-3.


File: gnat_rm.info,  Node: GNAT.SHA384 (g-sha384.ads),  Next: GNAT.SHA512 (g-sha512.ads),  Prev: GNAT.SHA256 (g-sha256.ads),  Up: The GNAT Library

10.97 `GNAT.SHA384' (`g-sha384.ads')
====================================

Implements the SHA-384 Secure Hash Algorithm as described in FIPS PUB
180-3.


File: gnat_rm.info,  Node: GNAT.SHA512 (g-sha512.ads),  Next: GNAT.Signals (g-signal.ads),  Prev: GNAT.SHA384 (g-sha384.ads),  Up: The GNAT Library

10.98 `GNAT.SHA512' (`g-sha512.ads')
====================================

Implements the SHA-512 Secure Hash Algorithm as described in FIPS PUB
180-3.


File: gnat_rm.info,  Node: GNAT.Signals (g-signal.ads),  Next: GNAT.Sockets (g-socket.ads),  Prev: GNAT.SHA512 (g-sha512.ads),  Up: The GNAT Library

10.99 `GNAT.Signals' (`g-signal.ads')
=====================================

Provides the ability to manipulate the blocked status of signals on
supported targets.


File: gnat_rm.info,  Node: GNAT.Sockets (g-socket.ads),  Next: GNAT.Source_Info (g-souinf.ads),  Prev: GNAT.Signals (g-signal.ads),  Up: The GNAT Library

10.100 `GNAT.Sockets' (`g-socket.ads')
======================================

A high level and portable interface to develop sockets based
applications.  This package is based on the sockets thin binding found
in `GNAT.Sockets.Thin'. Currently `GNAT.Sockets' is implemented on all
native GNAT ports except for OpenVMS.  It is not implemented for the
LynxOS cross port.


File: gnat_rm.info,  Node: GNAT.Source_Info (g-souinf.ads),  Next: GNAT.Spelling_Checker (g-speche.ads),  Prev: GNAT.Sockets (g-socket.ads),  Up: The GNAT Library

10.101 `GNAT.Source_Info' (`g-souinf.ads')
==========================================

Provides subprograms that give access to source code information known
at compile time, such as the current file name and line number.


File: gnat_rm.info,  Node: GNAT.Spelling_Checker (g-speche.ads),  Next: GNAT.Spelling_Checker_Generic (g-spchge.ads),  Prev: GNAT.Source_Info (g-souinf.ads),  Up: The GNAT Library

10.102 `GNAT.Spelling_Checker' (`g-speche.ads')
===============================================

Provides a function for determining whether one string is a plausible
near misspelling of another string.


File: gnat_rm.info,  Node: GNAT.Spelling_Checker_Generic (g-spchge.ads),  Next: GNAT.Spitbol.Patterns (g-spipat.ads),  Prev: GNAT.Spelling_Checker (g-speche.ads),  Up: The GNAT Library

10.103 `GNAT.Spelling_Checker_Generic' (`g-spchge.ads')
=======================================================

Provides a generic function that can be instantiated with a string type
for determining whether one string is a plausible near misspelling of
another string.


File: gnat_rm.info,  Node: GNAT.Spitbol.Patterns (g-spipat.ads),  Next: GNAT.Spitbol (g-spitbo.ads),  Prev: GNAT.Spelling_Checker_Generic (g-spchge.ads),  Up: The GNAT Library

10.104 `GNAT.Spitbol.Patterns' (`g-spipat.ads')
===============================================

A complete implementation of SNOBOL4 style pattern matching.  This is
the most elaborate of the pattern matching packages provided.  It fully
duplicates the SNOBOL4 dynamic pattern construction and matching
capabilities, using the efficient algorithm developed by Robert Dewar
for the SPITBOL system.


File: gnat_rm.info,  Node: GNAT.Spitbol (g-spitbo.ads),  Next: GNAT.Spitbol.Table_Boolean (g-sptabo.ads),  Prev: GNAT.Spitbol.Patterns (g-spipat.ads),  Up: The GNAT Library

10.105 `GNAT.Spitbol' (`g-spitbo.ads')
======================================

The top level package of the collection of SPITBOL-style functionality,
this package provides basic SNOBOL4 string manipulation functions, such
as Pad, Reverse, Trim, Substr capability, as well as a generic table
function useful for constructing arbitrary mappings from strings in the
style of the SNOBOL4 TABLE function.


File: gnat_rm.info,  Node: GNAT.Spitbol.Table_Boolean (g-sptabo.ads),  Next: GNAT.Spitbol.Table_Integer (g-sptain.ads),  Prev: GNAT.Spitbol (g-spitbo.ads),  Up: The GNAT Library

10.106 `GNAT.Spitbol.Table_Boolean' (`g-sptabo.ads')
====================================================

A library level of instantiation of `GNAT.Spitbol.Patterns.Table' for
type `Standard.Boolean', giving an implementation of sets of string
values.


File: gnat_rm.info,  Node: GNAT.Spitbol.Table_Integer (g-sptain.ads),  Next: GNAT.Spitbol.Table_VString (g-sptavs.ads),  Prev: GNAT.Spitbol.Table_Boolean (g-sptabo.ads),  Up: The GNAT Library

10.107 `GNAT.Spitbol.Table_Integer' (`g-sptain.ads')
====================================================

A library level of instantiation of `GNAT.Spitbol.Patterns.Table' for
type `Standard.Integer', giving an implementation of maps from string
to integer values.


File: gnat_rm.info,  Node: GNAT.Spitbol.Table_VString (g-sptavs.ads),  Next: GNAT.SSE (g-sse.ads),  Prev: GNAT.Spitbol.Table_Integer (g-sptain.ads),  Up: The GNAT Library

10.108 `GNAT.Spitbol.Table_VString' (`g-sptavs.ads')
====================================================

A library level of instantiation of `GNAT.Spitbol.Patterns.Table' for a
variable length string type, giving an implementation of general maps
from strings to strings.


File: gnat_rm.info,  Node: GNAT.SSE (g-sse.ads),  Next: GNAT.SSE.Vector_Types (g-ssvety.ads),  Prev: GNAT.Spitbol.Table_VString (g-sptavs.ads),  Up: The GNAT Library

10.109 `GNAT.SSE' (`g-sse.ads')
===============================

Root of a set of units aimed at offering Ada bindings to a subset of
the Intel(r) Streaming SIMD Extensions with GNAT on the x86 family of
targets.  It exposes vector component types together with a general
introduction to the binding contents and use.


File: gnat_rm.info,  Node: GNAT.SSE.Vector_Types (g-ssvety.ads),  Next: GNAT.Strings (g-string.ads),  Prev: GNAT.SSE (g-sse.ads),  Up: The GNAT Library

10.110 `GNAT.SSE.Vector_Types' (`g-ssvety.ads')
===============================================

SSE vector types for use with SSE related intrinsics.


File: gnat_rm.info,  Node: GNAT.Strings (g-string.ads),  Next: GNAT.String_Split (g-strspl.ads),  Prev: GNAT.SSE.Vector_Types (g-ssvety.ads),  Up: The GNAT Library

10.111 `GNAT.Strings' (`g-string.ads')
======================================

Common String access types and related subprograms. Basically it
defines a string access and an array of string access types.


File: gnat_rm.info,  Node: GNAT.String_Split (g-strspl.ads),  Next: GNAT.Table (g-table.ads),  Prev: GNAT.Strings (g-string.ads),  Up: The GNAT Library

10.112 `GNAT.String_Split' (`g-strspl.ads')
===========================================

Useful string manipulation routines: given a set of separators, split a
string wherever the separators appear, and provide direct access to the
resulting slices. This package is instantiated from `GNAT.Array_Split'.


File: gnat_rm.info,  Node: GNAT.Table (g-table.ads),  Next: GNAT.Task_Lock (g-tasloc.ads),  Prev: GNAT.String_Split (g-strspl.ads),  Up: The GNAT Library

10.113 `GNAT.Table' (`g-table.ads')
===================================

A generic package providing a single dimension array abstraction where
the length of the array can be dynamically modified.

This package provides a facility similar to that of
`GNAT.Dynamic_Tables', except that this package declares a single
instance of the table type, while an instantiation of
`GNAT.Dynamic_Tables' creates a type that can be used to define dynamic
instances of the table.


File: gnat_rm.info,  Node: GNAT.Task_Lock (g-tasloc.ads),  Next: GNAT.Threads (g-thread.ads),  Prev: GNAT.Table (g-table.ads),  Up: The GNAT Library

10.114 `GNAT.Task_Lock' (`g-tasloc.ads')
========================================

A very simple facility for locking and unlocking sections of code using
a single global task lock.  Appropriate for use in situations where
contention between tasks is very rarely expected.


File: gnat_rm.info,  Node: GNAT.Time_Stamp (g-timsta.ads),  Next: GNAT.Traceback (g-traceb.ads),  Prev: GNAT.Threads (g-thread.ads),  Up: The GNAT Library

10.115 `GNAT.Time_Stamp' (`g-timsta.ads')
=========================================

Provides a simple function that returns a string YYYY-MM-DD HH:MM:SS.SS
that represents the current date and time in ISO 8601 format. This is a
very simple routine with minimal code and there are no dependencies on
any other unit.


File: gnat_rm.info,  Node: GNAT.Threads (g-thread.ads),  Next: GNAT.Time_Stamp (g-timsta.ads),  Prev: GNAT.Task_Lock (g-tasloc.ads),  Up: The GNAT Library

10.116 `GNAT.Threads' (`g-thread.ads')
======================================

Provides facilities for dealing with foreign threads which need to be
known by the GNAT run-time system. Consult the documentation of this
package for further details if your program has threads that are
created by a non-Ada environment which then accesses Ada code.


File: gnat_rm.info,  Node: GNAT.Traceback (g-traceb.ads),  Next: GNAT.Traceback.Symbolic (g-trasym.ads),  Prev: GNAT.Time_Stamp (g-timsta.ads),  Up: The GNAT Library

10.117 `GNAT.Traceback' (`g-traceb.ads')
========================================

Provides a facility for obtaining non-symbolic traceback information,
useful in various debugging situations.


File: gnat_rm.info,  Node: GNAT.Traceback.Symbolic (g-trasym.ads),  Next: GNAT.UTF_32 (g-utf_32.ads),  Prev: GNAT.Traceback (g-traceb.ads),  Up: The GNAT Library

10.118 `GNAT.Traceback.Symbolic' (`g-trasym.ads')
=================================================


File: gnat_rm.info,  Node: GNAT.UTF_32 (g-utf_32.ads),  Next: GNAT.UTF_32_Spelling_Checker (g-u3spch.ads),  Prev: GNAT.Traceback.Symbolic (g-trasym.ads),  Up: The GNAT Library

10.119 `GNAT.UTF_32' (`g-table.ads')
====================================

This is a package intended to be used in conjunction with the
`Wide_Character' type in Ada 95 and the `Wide_Wide_Character' type in
Ada 2005 (available in `GNAT' in Ada 2005 mode). This package contains
Unicode categorization routines, as well as lexical categorization
routines corresponding to the Ada 2005 lexical rules for identifiers
and strings, and also a lower case to upper case fold routine
corresponding to the Ada 2005 rules for identifier equivalence.


File: gnat_rm.info,  Node: GNAT.UTF_32_Spelling_Checker (g-u3spch.ads),  Next: GNAT.Wide_Spelling_Checker (g-wispch.ads),  Prev: GNAT.UTF_32 (g-utf_32.ads),  Up: The GNAT Library

10.120 `GNAT.Wide_Spelling_Checker' (`g-u3spch.ads')
====================================================

Provides a function for determining whether one wide wide string is a
plausible near misspelling of another wide wide string, where the
strings are represented using the UTF_32_String type defined in
System.Wch_Cnv.


File: gnat_rm.info,  Node: GNAT.Wide_Spelling_Checker (g-wispch.ads),  Next: GNAT.Wide_String_Split (g-wistsp.ads),  Prev: GNAT.UTF_32_Spelling_Checker (g-u3spch.ads),  Up: The GNAT Library

10.121 `GNAT.Wide_Spelling_Checker' (`g-wispch.ads')
====================================================

Provides a function for determining whether one wide string is a
plausible near misspelling of another wide string.


File: gnat_rm.info,  Node: GNAT.Wide_String_Split (g-wistsp.ads),  Next: GNAT.Wide_Wide_Spelling_Checker (g-zspche.ads),  Prev: GNAT.Wide_Spelling_Checker (g-wispch.ads),  Up: The GNAT Library

10.122 `GNAT.Wide_String_Split' (`g-wistsp.ads')
================================================

Useful wide string manipulation routines: given a set of separators,
split a wide string wherever the separators appear, and provide direct
access to the resulting slices. This package is instantiated from
`GNAT.Array_Split'.


File: gnat_rm.info,  Node: GNAT.Wide_Wide_Spelling_Checker (g-zspche.ads),  Next: GNAT.Wide_Wide_String_Split (g-zistsp.ads),  Prev: GNAT.Wide_String_Split (g-wistsp.ads),  Up: The GNAT Library

10.123 `GNAT.Wide_Wide_Spelling_Checker' (`g-zspche.ads')
=========================================================

Provides a function for determining whether one wide wide string is a
plausible near misspelling of another wide wide string.


File: gnat_rm.info,  Node: GNAT.Wide_Wide_String_Split (g-zistsp.ads),  Next: Interfaces.C.Extensions (i-cexten.ads),  Prev: GNAT.Wide_Wide_Spelling_Checker (g-zspche.ads),  Up: The GNAT Library

10.124 `GNAT.Wide_Wide_String_Split' (`g-zistsp.ads')
=====================================================

Useful wide wide string manipulation routines: given a set of
separators, split a wide wide string wherever the separators appear,
and provide direct access to the resulting slices. This package is
instantiated from `GNAT.Array_Split'.


File: gnat_rm.info,  Node: Interfaces.C.Extensions (i-cexten.ads),  Next: Interfaces.C.Streams (i-cstrea.ads),  Prev: GNAT.Wide_Wide_String_Split (g-zistsp.ads),  Up: The GNAT Library

10.125 `Interfaces.C.Extensions' (`i-cexten.ads')
=================================================

This package contains additional C-related definitions, intended for
use with either manually or automatically generated bindings to C
libraries.


File: gnat_rm.info,  Node: Interfaces.C.Streams (i-cstrea.ads),  Next: Interfaces.CPP (i-cpp.ads),  Prev: Interfaces.C.Extensions (i-cexten.ads),  Up: The GNAT Library

10.126 `Interfaces.C.Streams' (`i-cstrea.ads')
==============================================

This package is a binding for the most commonly used operations on C
streams.


File: gnat_rm.info,  Node: Interfaces.CPP (i-cpp.ads),  Next: Interfaces.Packed_Decimal (i-pacdec.ads),  Prev: Interfaces.C.Streams (i-cstrea.ads),  Up: The GNAT Library

10.127 `Interfaces.CPP' (`i-cpp.ads')
=====================================

This package provides facilities for use in interfacing to C++.  It is
primarily intended to be used in connection with automated tools for
the generation of C++ interfaces.


File: gnat_rm.info,  Node: Interfaces.Packed_Decimal (i-pacdec.ads),  Next: Interfaces.VxWorks (i-vxwork.ads),  Prev: Interfaces.CPP (i-cpp.ads),  Up: The GNAT Library

10.128 `Interfaces.Packed_Decimal' (`i-pacdec.ads')
===================================================

This package provides a set of routines for conversions to and from a
packed decimal format compatible with that used on IBM mainframes.


File: gnat_rm.info,  Node: Interfaces.VxWorks (i-vxwork.ads),  Next: Interfaces.VxWorks.IO (i-vxwoio.ads),  Prev: Interfaces.Packed_Decimal (i-pacdec.ads),  Up: The GNAT Library

10.129 `Interfaces.VxWorks' (`i-vxwork.ads')
============================================

This package provides a limited binding to the VxWorks API.  In
particular, it interfaces with the VxWorks hardware interrupt
facilities.


File: gnat_rm.info,  Node: Interfaces.VxWorks.IO (i-vxwoio.ads),  Next: System.Address_Image (s-addima.ads),  Prev: Interfaces.VxWorks (i-vxwork.ads),  Up: The GNAT Library

10.130 `Interfaces.VxWorks.IO' (`i-vxwoio.ads')
===============================================

This package provides a binding to the ioctl (IO/Control) function of
VxWorks, defining a set of option values and function codes. A
particular use of this package is to enable the use of Get_Immediate
under VxWorks.


File: gnat_rm.info,  Node: System.Address_Image (s-addima.ads),  Next: System.Assertions (s-assert.ads),  Prev: Interfaces.VxWorks.IO (i-vxwoio.ads),  Up: The GNAT Library

10.131 `System.Address_Image' (`s-addima.ads')
==============================================

This function provides a useful debugging function that gives an
(implementation dependent) string which identifies an address.


File: gnat_rm.info,  Node: System.Assertions (s-assert.ads),  Next: System.Memory (s-memory.ads),  Prev: System.Address_Image (s-addima.ads),  Up: The GNAT Library

10.132 `System.Assertions' (`s-assert.ads')
===========================================

This package provides the declaration of the exception raised by an
run-time assertion failure, as well as the routine that is used
internally to raise this assertion.


File: gnat_rm.info,  Node: System.Memory (s-memory.ads),  Next: System.Partition_Interface (s-parint.ads),  Prev: System.Assertions (s-assert.ads),  Up: The GNAT Library

10.133 `System.Memory' (`s-memory.ads')
=======================================

This package provides the interface to the low level routines used by
the generated code for allocation and freeing storage for the default
storage pool (analogous to the C routines malloc and free.  It also
provides a reallocation interface analogous to the C routine realloc.
The body of this unit may be modified to provide alternative allocation
mechanisms for the default pool, and in addition, direct calls to this
unit may be made for low level allocation uses (for example see the
body of `GNAT.Tables').


File: gnat_rm.info,  Node: System.Partition_Interface (s-parint.ads),  Next: System.Pool_Global (s-pooglo.ads),  Prev: System.Memory (s-memory.ads),  Up: The GNAT Library

10.134 `System.Partition_Interface' (`s-parint.ads')
====================================================

This package provides facilities for partition interfacing.  It is used
primarily in a distribution context when using Annex E with `GLADE'.


File: gnat_rm.info,  Node: System.Pool_Global (s-pooglo.ads),  Next: System.Pool_Local (s-pooloc.ads),  Prev: System.Partition_Interface (s-parint.ads),  Up: The GNAT Library

10.135 `System.Pool_Global' (`s-pooglo.ads')
============================================

This package provides a storage pool that is equivalent to the default
storage pool used for access types for which no pool is specifically
declared. It uses malloc/free to allocate/free and does not attempt to
do any automatic reclamation.


File: gnat_rm.info,  Node: System.Pool_Local (s-pooloc.ads),  Next: System.Restrictions (s-restri.ads),  Prev: System.Pool_Global (s-pooglo.ads),  Up: The GNAT Library

10.136 `System.Pool_Local' (`s-pooloc.ads')
===========================================

This package provides a storage pool that is intended for use with
locally defined access types. It uses malloc/free for allocate/free,
and maintains a list of allocated blocks, so that all storage allocated
for the pool can be freed automatically when the pool is finalized.


File: gnat_rm.info,  Node: System.Restrictions (s-restri.ads),  Next: System.Rident (s-rident.ads),  Prev: System.Pool_Local (s-pooloc.ads),  Up: The GNAT Library

10.137 `System.Restrictions' (`s-restri.ads')
=============================================

This package provides facilities for accessing at run time the status
of restrictions specified at compile time for the partition.
Information is available both with regard to actual restrictions
specified, and with regard to compiler determined information on which
restrictions are violated by one or more packages in the partition.


File: gnat_rm.info,  Node: System.Rident (s-rident.ads),  Next: System.Strings.Stream_Ops (s-ststop.ads),  Prev: System.Restrictions (s-restri.ads),  Up: The GNAT Library

10.138 `System.Rident' (`s-rident.ads')
=======================================

This package provides definitions of the restrictions identifiers
supported by GNAT, and also the format of the restrictions provided in
package System.Restrictions.  It is not normally necessary to `with'
this generic package since the necessary instantiation is included in
package System.Restrictions.


File: gnat_rm.info,  Node: System.Strings.Stream_Ops (s-ststop.ads),  Next: System.Task_Info (s-tasinf.ads),  Prev: System.Rident (s-rident.ads),  Up: The GNAT Library

10.139 `System.Strings.Stream_Ops' (`s-ststop.ads')
===================================================

This package provides a set of stream subprograms for standard string
types.  It is intended primarily to support implicit use of such
subprograms when stream attributes are applied to string types, but the
subprograms in this package can be used directly by application
programs.


File: gnat_rm.info,  Node: System.Task_Info (s-tasinf.ads),  Next: System.Wch_Cnv (s-wchcnv.ads),  Prev: System.Strings.Stream_Ops (s-ststop.ads),  Up: The GNAT Library

10.140 `System.Task_Info' (`s-tasinf.ads')
==========================================

This package provides target dependent functionality that is used to
support the `Task_Info' pragma


File: gnat_rm.info,  Node: System.Wch_Cnv (s-wchcnv.ads),  Next: System.Wch_Con (s-wchcon.ads),  Prev: System.Task_Info (s-tasinf.ads),  Up: The GNAT Library

10.141 `System.Wch_Cnv' (`s-wchcnv.ads')
========================================

This package provides routines for converting between wide and wide
wide characters and a representation as a value of type
`Standard.String', using a specified wide character encoding method.
It uses definitions in package `System.Wch_Con'.


File: gnat_rm.info,  Node: System.Wch_Con (s-wchcon.ads),  Prev: System.Wch_Cnv (s-wchcnv.ads),  Up: The GNAT Library

10.142 `System.Wch_Con' (`s-wchcon.ads')
========================================

This package provides definitions and descriptions of the various
methods used for encoding wide characters in ordinary strings.  These
definitions are used by the package `System.Wch_Cnv'.


File: gnat_rm.info,  Node: Interfacing to Other Languages,  Next: Specialized Needs Annexes,  Prev: The GNAT Library,  Up: Top

11 Interfacing to Other Languages
*********************************

The facilities in annex B of the Ada Reference Manual are fully
implemented in GNAT, and in addition, a full interface to C++ is
provided.

* Menu:

* Interfacing to C::
* Interfacing to C++::
* Interfacing to COBOL::
* Interfacing to Fortran::
* Interfacing to non-GNAT Ada code::


File: gnat_rm.info,  Node: Interfacing to C,  Next: Interfacing to C++,  Up: Interfacing to Other Languages

11.1 Interfacing to C
=====================

Interfacing to C with GNAT can use one of two approaches:

   * The types in the package `Interfaces.C' may be used.

   * Standard Ada types may be used directly.  This may be less
     portable to other compilers, but will work on all GNAT compilers,
     which guarantee correspondence between the C and Ada types.

Pragma `Convention C' may be applied to Ada types, but mostly has no
effect, since this is the default.  The following table shows the
correspondence between Ada scalar types and the corresponding C types.

`Integer'
     `int'

`Short_Integer'
     `short'

`Short_Short_Integer'
     `signed char'

`Long_Integer'
     `long'

`Long_Long_Integer'
     `long long'

`Short_Float'
     `float'

`Float'
     `float'

`Long_Float'
     `double'

`Long_Long_Float'
     This is the longest floating-point type supported by the hardware.

Additionally, there are the following general correspondences between
Ada and C types:
   * Ada enumeration types map to C enumeration types directly if pragma
     `Convention C' is specified, which causes them to have int length.
     Without pragma `Convention C', Ada enumeration types map to 8,
     16, or 32 bits (i.e. C types `signed char', `short', `int',
     respectively) depending on the number of values passed.  This is
     the only case in which pragma `Convention C' affects the
     representation of an Ada type.

   * Ada access types map to C pointers, except for the case of
     pointers to unconstrained types in Ada, which have no direct C
     equivalent.

   * Ada arrays map directly to C arrays.

   * Ada records map directly to C structures.

   * Packed Ada records map to C structures where all members are bit
     fields of the length corresponding to the `TYPE'Size' value in Ada.


File: gnat_rm.info,  Node: Interfacing to C++,  Next: Interfacing to COBOL,  Prev: Interfacing to C,  Up: Interfacing to Other Languages

11.2 Interfacing to C++
=======================

The interface to C++ makes use of the following pragmas, which are
primarily intended to be constructed automatically using a binding
generator tool, although it is possible to construct them by hand.  No
suitable binding generator tool is supplied with GNAT though.

   Using these pragmas it is possible to achieve complete
inter-operability between Ada tagged types and C++ class definitions.
See *Note Implementation Defined Pragmas::, for more details.

`pragma CPP_Class ([Entity =>] LOCAL_NAME)'
     The argument denotes an entity in the current declarative region
     that is declared as a tagged or untagged record type. It indicates
     that the type corresponds to an externally declared C++ class
     type, and is to be laid out the same way that C++ would lay out
     the type.

     Note: Pragma `CPP_Class' is currently obsolete. It is supported
     for backward compatibility but its functionality is available
     using pragma `Import' with `Convention' = `CPP'.

`pragma CPP_Constructor ([Entity =>] LOCAL_NAME)'
     This pragma identifies an imported function (imported in the usual
     way with pragma `Import') as corresponding to a C++ constructor.


File: gnat_rm.info,  Node: Interfacing to COBOL,  Next: Interfacing to Fortran,  Prev: Interfacing to C++,  Up: Interfacing to Other Languages

11.3 Interfacing to COBOL
=========================

Interfacing to COBOL is achieved as described in section B.4 of the Ada
Reference Manual.


File: gnat_rm.info,  Node: Interfacing to Fortran,  Next: Interfacing to non-GNAT Ada code,  Prev: Interfacing to COBOL,  Up: Interfacing to Other Languages

11.4 Interfacing to Fortran
===========================

Interfacing to Fortran is achieved as described in section B.5 of the
Ada Reference Manual.  The pragma `Convention Fortran', applied to a
multi-dimensional array causes the array to be stored in column-major
order as required for convenient interface to Fortran.


File: gnat_rm.info,  Node: Interfacing to non-GNAT Ada code,  Prev: Interfacing to Fortran,  Up: Interfacing to Other Languages

11.5 Interfacing to non-GNAT Ada code
=====================================

It is possible to specify the convention `Ada' in a pragma `Import' or
pragma `Export'.  However this refers to the calling conventions used
by GNAT, which may or may not be similar enough to those used by some
other Ada 83 / Ada 95 / Ada 2005 compiler to allow interoperation.

   If arguments types are kept simple, and if the foreign compiler
generally follows system calling conventions, then it may be possible
to integrate files compiled by other Ada compilers, provided that the
elaboration issues are adequately addressed (for example by eliminating
the need for any load time elaboration).

   In particular, GNAT running on VMS is designed to be highly
compatible with the DEC Ada 83 compiler, so this is one case in which
it is possible to import foreign units of this type, provided that the
data items passed are restricted to simple scalar values or simple
record types without variants, or simple array types with fixed bounds.


File: gnat_rm.info,  Node: Specialized Needs Annexes,  Next: Implementation of Specific Ada Features,  Prev: Interfacing to Other Languages,  Up: Top

12 Specialized Needs Annexes
****************************

Ada 95 and Ada 2005 define a number of Specialized Needs Annexes, which
are not required in all implementations.  However, as described in this
chapter, GNAT implements all of these annexes:

Systems Programming (Annex C)
     The Systems Programming Annex is fully implemented.

Real-Time Systems (Annex D)
     The Real-Time Systems Annex is fully implemented.

Distributed Systems (Annex E)
     Stub generation is fully implemented in the GNAT compiler.  In
     addition, a complete compatible PCS is available as part of the
     GLADE system, a separate product.  When the two products are used
     in conjunction, this annex is fully implemented.

Information Systems (Annex F)
     The Information Systems annex is fully implemented.

Numerics (Annex G)
     The Numerics Annex is fully implemented.

Safety and Security / High-Integrity Systems (Annex H)
     The Safety and Security Annex (termed the High-Integrity Systems
     Annex in Ada 2005) is fully implemented.


File: gnat_rm.info,  Node: Implementation of Specific Ada Features,  Next: Implementation of Ada 2012 Features,  Prev: Specialized Needs Annexes,  Up: Top

13 Implementation of Specific Ada Features
******************************************

This chapter describes the GNAT implementation of several Ada language
facilities.

* Menu:

* Machine Code Insertions::
* GNAT Implementation of Tasking::
* GNAT Implementation of Shared Passive Packages::
* Code Generation for Array Aggregates::
* The Size of Discriminated Records with Default Discriminants::
* Strict Conformance to the Ada Reference Manual::


File: gnat_rm.info,  Node: Machine Code Insertions,  Next: GNAT Implementation of Tasking,  Up: Implementation of Specific Ada Features

13.1 Machine Code Insertions
============================

Package `Machine_Code' provides machine code support as described in
the Ada Reference Manual in two separate forms:
   * Machine code statements, consisting of qualified expressions that
     fit the requirements of RM section 13.8.

   * An intrinsic callable procedure, providing an alternative
     mechanism of including machine instructions in a subprogram.

The two features are similar, and both are closely related to the
mechanism provided by the asm instruction in the GNU C compiler.  Full
understanding and use of the facilities in this package requires
understanding the asm instruction, see *Note Assembler Instructions
with C Expression Operands: (gcc)Extended Asm.

   Calls to the function `Asm' and the procedure `Asm' have identical
semantic restrictions and effects as described below.  Both are
provided so that the procedure call can be used as a statement, and the
function call can be used to form a code_statement.

   The first example given in the GCC documentation is the C `asm'
instruction:
        asm ("fsinx %1 %0" : "=f" (result) : "f" (angle));

The equivalent can be written for GNAT as:

     Asm ("fsinx %1 %0",
          My_Float'Asm_Output ("=f", result),
          My_Float'Asm_Input  ("f",  angle));

The first argument to `Asm' is the assembler template, and is identical
to what is used in GNU C.  This string must be a static expression.
The second argument is the output operand list.  It is either a single
`Asm_Output' attribute reference, or a list of such references enclosed
in parentheses (technically an array aggregate of such references).

   The `Asm_Output' attribute denotes a function that takes two
parameters.  The first is a string, the second is the name of a variable
of the type designated by the attribute prefix.  The first (string)
argument is required to be a static expression and designates the
constraint for the parameter (e.g. what kind of register is required).
The second argument is the variable to be updated with the result.  The
possible values for constraint are the same as those used in the RTL,
and are dependent on the configuration file used to build the GCC back
end.  If there are no output operands, then this argument may either be
omitted, or explicitly given as `No_Output_Operands'.

   The second argument of `MY_FLOAT'Asm_Output' functions as though it
were an `out' parameter, which is a little curious, but all names have
the form of expressions, so there is no syntactic irregularity, even
though normally functions would not be permitted `out' parameters.  The
third argument is the list of input operands.  It is either a single
`Asm_Input' attribute reference, or a list of such references enclosed
in parentheses (technically an array aggregate of such references).

   The `Asm_Input' attribute denotes a function that takes two
parameters.  The first is a string, the second is an expression of the
type designated by the prefix.  The first (string) argument is required
to be a static expression, and is the constraint for the parameter,
(e.g. what kind of register is required).  The second argument is the
value to be used as the input argument.  The possible values for the
constant are the same as those used in the RTL, and are dependent on
the configuration file used to built the GCC back end.

   If there are no input operands, this argument may either be omitted,
or explicitly given as `No_Input_Operands'.  The fourth argument, not
present in the above example, is a list of register names, called the
"clobber" argument.  This argument, if given, must be a static string
expression, and is a space or comma separated list of names of registers
that must be considered destroyed as a result of the `Asm' call.  If
this argument is the null string (the default value), then the code
generator assumes that no additional registers are destroyed.

   The fifth argument, not present in the above example, called the
"volatile" argument, is by default `False'.  It can be set to the
literal value `True' to indicate to the code generator that all
optimizations with respect to the instruction specified should be
suppressed, and that in particular, for an instruction that has outputs,
the instruction will still be generated, even if none of the outputs are
used.  *Note Assembler Instructions with C Expression Operands:
(gcc)Extended Asm, for the full description.  Generally it is strongly
advisable to use Volatile for any ASM statement that is missing either
input or output operands, or when two or more ASM statements appear in
sequence, to avoid unwanted optimizations. A warning is generated if
this advice is not followed.

   The `Asm' subprograms may be used in two ways.  First the procedure
forms can be used anywhere a procedure call would be valid, and
correspond to what the RM calls "intrinsic" routines.  Such calls can
be used to intersperse machine instructions with other Ada statements.
Second, the function forms, which return a dummy value of the limited
private type `Asm_Insn', can be used in code statements, and indeed
this is the only context where such calls are allowed.  Code statements
appear as aggregates of the form:

     Asm_Insn'(Asm (...));
     Asm_Insn'(Asm_Volatile (...));

In accordance with RM rules, such code statements are allowed only
within subprograms whose entire body consists of such statements.  It is
not permissible to intermix such statements with other Ada statements.

   Typically the form using intrinsic procedure calls is more convenient
and more flexible.  The code statement form is provided to meet the RM
suggestion that such a facility should be made available.  The following
is the exact syntax of the call to `Asm'. As usual, if named notation
is used, the arguments may be given in arbitrary order, following the
normal rules for use of positional and named arguments)

     ASM_CALL ::= Asm (
                      [Template =>] static_string_EXPRESSION
                    [,[Outputs  =>] OUTPUT_OPERAND_LIST      ]
                    [,[Inputs   =>] INPUT_OPERAND_LIST       ]
                    [,[Clobber  =>] static_string_EXPRESSION ]
                    [,[Volatile =>] static_boolean_EXPRESSION] )

     OUTPUT_OPERAND_LIST ::=
       [PREFIX.]No_Output_Operands
     | OUTPUT_OPERAND_ATTRIBUTE
     | (OUTPUT_OPERAND_ATTRIBUTE {,OUTPUT_OPERAND_ATTRIBUTE})

     OUTPUT_OPERAND_ATTRIBUTE ::=
       SUBTYPE_MARK'Asm_Output (static_string_EXPRESSION, NAME)

     INPUT_OPERAND_LIST ::=
       [PREFIX.]No_Input_Operands
     | INPUT_OPERAND_ATTRIBUTE
     | (INPUT_OPERAND_ATTRIBUTE {,INPUT_OPERAND_ATTRIBUTE})

     INPUT_OPERAND_ATTRIBUTE ::=
       SUBTYPE_MARK'Asm_Input (static_string_EXPRESSION, EXPRESSION)

The identifiers `No_Input_Operands' and `No_Output_Operands' are
declared in the package `Machine_Code' and must be referenced according
to normal visibility rules. In particular if there is no `use' clause
for this package, then appropriate package name qualification is
required.


File: gnat_rm.info,  Node: GNAT Implementation of Tasking,  Next: GNAT Implementation of Shared Passive Packages,  Prev: Machine Code Insertions,  Up: Implementation of Specific Ada Features

13.2 GNAT Implementation of Tasking
===================================

This chapter outlines the basic GNAT approach to tasking (in particular,
a multi-layered library for portability) and discusses issues related
to compliance with the Real-Time Systems Annex.

* Menu:

* Mapping Ada Tasks onto the Underlying Kernel Threads::
* Ensuring Compliance with the Real-Time Annex::


File: gnat_rm.info,  Node: Mapping Ada Tasks onto the Underlying Kernel Threads,  Next: Ensuring Compliance with the Real-Time Annex,  Up: GNAT Implementation of Tasking

13.2.1 Mapping Ada Tasks onto the Underlying Kernel Threads
-----------------------------------------------------------

GNAT's run-time support comprises two layers:

   * GNARL (GNAT Run-time Layer)

   * GNULL (GNAT Low-level Library)

In GNAT, Ada's tasking services rely on a platform and OS independent
layer known as GNARL.  This code is responsible for implementing the
correct semantics of Ada's task creation, rendezvous, protected
operations etc.

   GNARL decomposes Ada's tasking semantics into simpler lower level
operations such as create a thread, set the priority of a thread,
yield, create a lock, lock/unlock, etc.  The spec for these low-level
operations constitutes GNULLI, the GNULL Interface.  This interface is
directly inspired from the POSIX real-time API.

   If the underlying executive or OS implements the POSIX standard
faithfully, the GNULL Interface maps as is to the services offered by
the underlying kernel.  Otherwise, some target dependent glue code maps
the services offered by the underlying kernel to the semantics expected
by GNARL.

   Whatever the underlying OS (VxWorks, UNIX, Windows, etc.) the key
point is that each Ada task is mapped on a thread in the underlying
kernel.  For example, in the case of VxWorks, one Ada task = one
VxWorks task.

   In addition Ada task priorities map onto the underlying thread
priorities.  Mapping Ada tasks onto the underlying kernel threads has
several advantages:

   * The underlying scheduler is used to schedule the Ada tasks.  This
     makes Ada tasks as efficient as kernel threads from a scheduling
     standpoint.

   * Interaction with code written in C containing threads is eased
     since at the lowest level Ada tasks and C threads map onto the same
     underlying kernel concept.

   * When an Ada task is blocked during I/O the remaining Ada tasks are
     able to proceed.

   * On multiprocessor systems Ada tasks can execute in parallel.

Some threads libraries offer a mechanism to fork a new process, with the
child process duplicating the threads from the parent.  GNAT does not
support this functionality when the parent contains more than one task.  


File: gnat_rm.info,  Node: Ensuring Compliance with the Real-Time Annex,  Prev: Mapping Ada Tasks onto the Underlying Kernel Threads,  Up: GNAT Implementation of Tasking

13.2.2 Ensuring Compliance with the Real-Time Annex
---------------------------------------------------

Although mapping Ada tasks onto the underlying threads has significant
advantages, it does create some complications when it comes to
respecting the scheduling semantics specified in the real-time annex
(Annex D).

   For instance the Annex D requirement for the `FIFO_Within_Priorities'
scheduling policy states:

     _When the active priority of a ready task that is not running
     changes, or the setting of its base priority takes effect, the
     task is removed from the ready queue for its old active priority
     and is added at the tail of the ready queue for its new active
     priority, except in the case where the active priority is lowered
     due to the loss of inherited priority, in which case the task is
     added at the head of the ready queue for its new active priority._

While most kernels do put tasks at the end of the priority queue when a
task changes its priority, (which respects the main
FIFO_Within_Priorities requirement), almost none keep a thread at the
beginning of its priority queue when its priority drops from the loss
of inherited priority.

   As a result most vendors have provided incomplete Annex D
implementations.

   The GNAT run-time, has a nice cooperative solution to this problem
which ensures that accurate FIFO_Within_Priorities semantics are
respected.

   The principle is as follows.  When an Ada task T is about to start
running, it checks whether some other Ada task R with the same priority
as T has been suspended due to the loss of priority inheritance.  If
this is the case, T yields and is placed at the end of its priority
queue.  When R arrives at the front of the queue it executes.

   Note that this simple scheme preserves the relative order of the
tasks that were ready to execute in the priority queue where R has been
placed at the end.


File: gnat_rm.info,  Node: GNAT Implementation of Shared Passive Packages,  Next: Code Generation for Array Aggregates,  Prev: GNAT Implementation of Tasking,  Up: Implementation of Specific Ada Features

13.3 GNAT Implementation of Shared Passive Packages
===================================================

GNAT fully implements the pragma `Shared_Passive' for the purpose of
designating shared passive packages.  This allows the use of passive
partitions in the context described in the Ada Reference Manual; i.e.,
for communication between separate partitions of a distributed
application using the features in Annex E.  

   However, the implementation approach used by GNAT provides for more
extensive usage as follows:

_Communication between separate programs_
     This allows separate programs to access the data in passive
     partitions, using protected objects for synchronization where
     needed. The only requirement is that the two programs have a
     common shared file system. It is even possible for programs
     running on different machines with different architectures (e.g.
     different endianness) to communicate via the data in a passive
     partition.

_Persistence between program runs_
     The data in a passive package can persist from one run of a
     program to another, so that a later program sees the final values
     stored by a previous run of the same program.


The implementation approach used is to store the data in files. A
separate stream file is created for each object in the package, and an
access to an object causes the corresponding file to be read or written.

   The environment variable `SHARED_MEMORY_DIRECTORY' should be set to
the directory to be used for these files.  The files in this directory
have names that correspond to their fully qualified names. For example,
if we have the package

     package X is
       pragma Shared_Passive (X);
       Y : Integer;
       Z : Float;
     end X;

and the environment variable is set to `/stemp/', then the files created
will have the names:

     /stemp/x.y
     /stemp/x.z

These files are created when a value is initially written to the
object, and the files are retained until manually deleted. This
provides the persistence semantics. If no file exists, it means that no
partition has assigned a value to the variable; in this case the
initial value declared in the package will be used. This model ensures
that there are no issues in synchronizing the elaboration process,
since elaboration of passive packages elaborates the initial values,
but does not create the files.

   The files are written using normal `Stream_IO' access.  If you want
to be able to communicate between programs or partitions running on
different architectures, then you should use the XDR versions of the
stream attribute routines, since these are architecture independent.

   If active synchronization is required for access to the variables in
the shared passive package, then as described in the Ada Reference
Manual, the package may contain protected objects used for this
purpose. In this case a lock file (whose name is `___lock' (three
underscores) is created in the shared memory directory.  This is used
to provide the required locking semantics for proper protected object
synchronization.

   As of January 2003, GNAT supports shared passive packages on all
platforms except for OpenVMS.


File: gnat_rm.info,  Node: Code Generation for Array Aggregates,  Next: The Size of Discriminated Records with Default Discriminants,  Prev: GNAT Implementation of Shared Passive Packages,  Up: Implementation of Specific Ada Features

13.4 Code Generation for Array Aggregates
=========================================

* Menu:

* Static constant aggregates with static bounds::
* Constant aggregates with unconstrained nominal types::
* Aggregates with static bounds::
* Aggregates with non-static bounds::
* Aggregates in assignment statements::

Aggregates have a rich syntax and allow the user to specify the values
of complex data structures by means of a single construct.  As a
result, the code generated for aggregates can be quite complex and
involve loops, case statements and multiple assignments.  In the
simplest cases, however, the compiler will recognize aggregates whose
components and constraints are fully static, and in those cases the
compiler will generate little or no executable code.  The following is
an outline of the code that GNAT generates for various aggregate
constructs.  For further details, you will find it useful to examine
the output produced by the -gnatG flag to see the expanded source that
is input to the code generator.  You may also want to examine the
assembly code generated at various levels of optimization.

   The code generated for aggregates depends on the context, the
component values, and the type.  In the context of an object
declaration the code generated is generally simpler than in the case of
an assignment.  As a general rule, static component values and static
subtypes also lead to simpler code.


File: gnat_rm.info,  Node: Static constant aggregates with static bounds,  Next: Constant aggregates with unconstrained nominal types,  Up: Code Generation for Array Aggregates

13.4.1 Static constant aggregates with static bounds
----------------------------------------------------

For the declarations:
         type One_Dim is array (1..10) of integer;
         ar0 : constant One_Dim := (1, 2, 3, 4, 5, 6, 7, 8, 9, 0);

GNAT generates no executable code: the constant ar0 is placed in static
memory.  The same is true for constant aggregates with named
associations:

         Cr1 : constant One_Dim := (4 => 16, 2 => 4, 3 => 9, 1 => 1, 5 .. 10 => 0);
         Cr3 : constant One_Dim := (others => 7777);

The same is true for multidimensional constant arrays such as:

         type two_dim is array (1..3, 1..3) of integer;
         Unit : constant two_dim := ( (1,0,0), (0,1,0), (0,0,1));

The same is true for arrays of one-dimensional arrays: the following are
static:

     type ar1b  is array (1..3) of boolean;
     type ar_ar is array (1..3) of ar1b;
     None  : constant ar1b := (others => false);     --  fully static
     None2 : constant ar_ar := (1..3 => None);       --  fully static

However, for multidimensional aggregates with named associations, GNAT
will generate assignments and loops, even if all associations are
static.  The following two declarations generate a loop for the first
dimension, and individual component assignments for the second
dimension:

     Zero1: constant two_dim := (1..3 => (1..3 => 0));
     Zero2: constant two_dim := (others => (others => 0));


File: gnat_rm.info,  Node: Constant aggregates with unconstrained nominal types,  Next: Aggregates with static bounds,  Prev: Static constant aggregates with static bounds,  Up: Code Generation for Array Aggregates

13.4.2 Constant aggregates with unconstrained nominal types
-----------------------------------------------------------

In such cases the aggregate itself establishes the subtype, so that
associations with `others' cannot be used.  GNAT determines the bounds
for the actual subtype of the aggregate, and allocates the aggregate
statically as well.  No code is generated for the following:

         type One_Unc is array (natural range <>) of integer;
         Cr_Unc : constant One_Unc := (12,24,36);


File: gnat_rm.info,  Node: Aggregates with static bounds,  Next: Aggregates with non-static bounds,  Prev: Constant aggregates with unconstrained nominal types,  Up: Code Generation for Array Aggregates

13.4.3 Aggregates with static bounds
------------------------------------

In all previous examples the aggregate was the initial (and immutable)
value of a constant.  If the aggregate initializes a variable, then
code is generated for it as a combination of individual assignments and
loops over the target object.  The declarations

            Cr_Var1 : One_Dim := (2, 5, 7, 11, 0, 0, 0, 0, 0, 0);
            Cr_Var2 : One_Dim := (others > -1);

generate the equivalent of

            Cr_Var1 (1) := 2;
            Cr_Var1 (2) := 3;
            Cr_Var1 (3) := 5;
            Cr_Var1 (4) := 11;

            for I in Cr_Var2'range loop
               Cr_Var2 (I) := -1;
            end loop;


File: gnat_rm.info,  Node: Aggregates with non-static bounds,  Next: Aggregates in assignment statements,  Prev: Aggregates with static bounds,  Up: Code Generation for Array Aggregates

13.4.4 Aggregates with non-static bounds
----------------------------------------

If the bounds of the aggregate are not statically compatible with the
bounds of the nominal subtype  of the target, then constraint checks
have to be generated on the bounds.  For a multidimensional array,
constraint checks may have to be applied to sub-arrays individually, if
they do not have statically compatible subtypes.


File: gnat_rm.info,  Node: Aggregates in assignment statements,  Prev: Aggregates with non-static bounds,  Up: Code Generation for Array Aggregates

13.4.5 Aggregates in assignment statements
------------------------------------------

In general, aggregate assignment requires the construction of a
temporary, and a copy from the temporary to the target of the
assignment.  This is because it is not always possible to convert the
assignment into a series of individual component assignments.  For
example, consider the simple case:

             A := (A(2), A(1));

This cannot be converted into:

             A(1) := A(2);
             A(2) := A(1);

So the aggregate has to be built first in a separate location, and then
copied into the target.  GNAT recognizes simple cases where this
intermediate step is not required, and the assignments can be performed
in place, directly into the target.  The following sufficient criteria
are applied:

   * The bounds of the aggregate are static, and the associations are
     static.

   * The components of the aggregate are static constants, names of
     simple variables that are not renamings, or expressions not
     involving indexed components whose operands obey these rules.

If any of these conditions are violated, the aggregate will be built in
a temporary (created either by the front-end or the code generator) and
then that temporary will be copied onto the target.


File: gnat_rm.info,  Node: The Size of Discriminated Records with Default Discriminants,  Next: Strict Conformance to the Ada Reference Manual,  Prev: Code Generation for Array Aggregates,  Up: Implementation of Specific Ada Features

13.5 The Size of Discriminated Records with Default Discriminants
=================================================================

If a discriminated type `T' has discriminants with default values, it is
possible to declare an object of this type without providing an explicit
constraint:

     type Size is range 1..100;

     type Rec (D : Size := 15) is record
        Name : String (1..D);
     end T;

     Word : Rec;

Such an object is said to be _unconstrained_.  The discriminant of the
object can be modified by a full assignment to the object, as long as
it preserves the relation between the value of the discriminant, and
the value of the components that depend on it:

     Word := (3, "yes");

     Word := (5, "maybe");

     Word := (5, "no"); -- raises Constraint_Error

In order to support this behavior efficiently, an unconstrained object
is given the maximum size that any value of the type requires. In the
case above, `Word' has storage for the discriminant and for a `String'
of length 100.  It is important to note that unconstrained objects do
not require dynamic allocation. It would be an improper implementation
to place on the heap those components whose size depends on
discriminants. (This improper implementation was used by some Ada83
compilers, where the `Name' component above would have been stored as a
pointer to a dynamic string). Following the principle that dynamic
storage management should never be introduced implicitly, an Ada
compiler should reserve the full size for an unconstrained declared
object, and place it on the stack.

   This maximum size approach has been a source of surprise to some
users, who expect the default values of the discriminants to determine
the size reserved for an unconstrained object: "If the default is 15,
why should the object occupy a larger size?"  The answer, of course, is
that the discriminant may be later modified, and its full range of
values must be taken into account. This is why the declaration:

     type Rec (D : Positive := 15) is record
        Name : String (1..D);
     end record;

     Too_Large : Rec;

is flagged by the compiler with a warning: an attempt to create
`Too_Large' will raise `Storage_Error', because the required size
includes `Positive'Last' bytes. As the first example indicates, the
proper approach is to declare an index type of "reasonable" range so
that unconstrained objects are not too large.

   One final wrinkle: if the object is declared to be `aliased', or if
it is created in the heap by means of an allocator, then it is _not_
unconstrained: it is constrained by the default values of the
discriminants, and those values cannot be modified by full assignment.
This is because in the presence of aliasing all views of the object
(which may be manipulated by different tasks, say) must be consistent,
so it is imperative that the object, once created, remain invariant.


File: gnat_rm.info,  Node: Strict Conformance to the Ada Reference Manual,  Prev: The Size of Discriminated Records with Default Discriminants,  Up: Implementation of Specific Ada Features

13.6 Strict Conformance to the Ada Reference Manual
===================================================

The dynamic semantics defined by the Ada Reference Manual impose a set
of run-time checks to be generated. By default, the GNAT compiler will
insert many run-time checks into the compiled code, including most of
those required by the Ada Reference Manual. However, there are three
checks that are not enabled in the default mode for efficiency reasons:
arithmetic overflow checking for integer operations (including division
by zero), checks for access before elaboration on subprogram calls, and
stack overflow checking (most operating systems do not perform this
check by default).

   Strict conformance to the Ada Reference Manual can be achieved by
adding three compiler options for overflow checking for integer
operations (`-gnato'), dynamic checks for access-before-elaboration on
subprogram calls and generic instantiations (`-gnatE'), and stack
overflow checking (`-fstack-check').

   Note that the result of a floating point arithmetic operation in
overflow and invalid situations, when the `Machine_Overflows' attribute
of the result type is `False', is to generate IEEE NaN and infinite
values. This is the case for machines compliant with the IEEE
floating-point standard, but on machines that are not fully compliant
with this standard, such as Alpha, the `-mieee' compiler flag must be
used for achieving IEEE confirming behavior (although at the cost of a
significant performance penalty), so infinite and NaN values are
properly generated.


File: gnat_rm.info,  Node: Implementation of Ada 2012 Features,  Next: Obsolescent Features,  Prev: Implementation of Specific Ada Features,  Up: Top

14 Implementation of Ada 2012 Features
**************************************

This chapter contains a complete list of Ada 2012 features that have
been implemented as of GNAT version 6.4. Generally, these features are
only available if the `-gnat12' (Ada 2012 features enabled) flag is set or
if the configuration pragma `Ada_2012' is used.  However, new pragmas,
attributes, and restrictions are unconditionally available, since the
Ada 95 standard allows the addition of new pragmas, attributes, and
restrictions (there are exceptions, which are documented in the
individual descriptions), and also certain packages were made available
in earlier versions of Ada.

   An ISO date (YYYY-MM-DD) appears in parentheses on the description
line.  This date shows the implementation date of the feature. Any
wavefront subsequent to this date will contain the indicated feature,
as will any subsequent releases. A date of 0000-00-00 means that GNAT
has always implemented the feature, or implemented it as soon as it
appeared as a binding interpretation.

   Each feature corresponds to an Ada Issue ("AI") approved by the Ada
standardization group (ISO/IEC JTC1/SC22/WG9) for inclusion in Ada 2012.
The features are ordered based on the relevant sections of the Ada
Reference Manual ("RM").  When a given AI relates to multiple points in
the RM, the earliest is used.

   A complete description of the AIs may be found in
`www.ada-auth.org/ai05-summary.html'.

   * _AI-0176 Quantified expressions (2010-09-29)_ 

     Both universally and existentially quantified expressions are
     implemented.    They use the new syntax for iterators proposed in
     AI05-139-2, as well as   the standard Ada loop syntax.

     RM References:  1.01.04 (12)   2.09 (2/2)   4.04 (7)   4.05.09 (0)

   * _AI-0079 Allow other_format characters in source (2010-07-10)_ 

     Wide characters in the unicode category other_format are now
     allowed in   source programs between tokens, but not within a
     token such as an identifier.

     RM References:  2.01 (4/2)   2.02 (7)

   * _AI-0091 Do not allow other_format in identifiers (0000-00-00)_ 

     Wide characters in the unicode category other_format are not
     permitted   within  an identifier, since this can be a security
     problem. The error   message for this case has been improved to be
     more specific, but GNAT has   never allowed such characters to
     appear in identifiers.

     RM References:  2.03 (3.1/2)   2.03 (4/2)   2.03 (5/2)   2.03
     (5.1/2)   2.03 (5.2/2)   2.03 (5.3/2)   2.09 (2/2)

   * _AI-0100 Placement of pragmas  (2010-07-01)_ 

     This AI is an earlier version of AI-163. It simplifies the rules
     for legal placement of pragmas. In the case of lists that allow
     pragmas, if   the list may have no elements, then the list may
     consist solely of pragmas.

     RM References:  2.08 (7)

   * _AI-0163 Pragmas in place of null (2010-07-01)_ 

     A statement sequence may be composed entirely of pragmas. It is no
     longer   necessary to add a dummy `null' statement to make the
     sequence legal.

     RM References:  2.08 (7)   2.08 (16)

   * _AI-0080 "View of" not needed if clear from context (0000-00-00)_ 

     This is an editorial change only, described as non-testable in the
     AI.

     RM References:  3.01 (7)

   * _AI-0183 Aspect specifications (2010-08-16)_ 

     Aspect specifications have been fully implemented except for pre
     and post-   conditions, and type invariants, which have their own
     separate AI's. All   forms of declarations listed in the AI are
     supported. The following is a   list of the aspects supported
     (with GNAT implementation aspects marked)

     `Ada_2005'                       - GNAT
     `Ada_2012'                       - GNAT
     `Address'                        
     `Alignment'                      
     `Atomic'                         
     `Atomic_Components'              
     `Bit_Order'                      
     `Component_Size'                 
     `Discard_Names'                  
     `External_Tag'                   
     `Favor_Top_Level'                - GNAT
     `Inline'                         
     `Inline_Always'                  - GNAT
     `Invariant'                      
     `Machine_Radix'                  
     `No_Return'                      
     `Object_Size'                    - GNAT
     `Pack'                           
     `Persistent_BSS'                 - GNAT
     `Post'                           
     `Pre'                            
     `Predicate'                      
     `Preelaborable_Initialization'   
     `Pure_Function'                  - GNAT
     `Remote_Access_Type'             - GNAT
     `Shared'                         - GNAT
     `Size'                           
     `Storage_Pool'                   
     `Storage_Size'                   
     `Stream_Size'                    
     `Suppress'                       
     `Suppress_Debug_Info'            - GNAT
     `Test_Case'                      - GNAT
     `Unchecked_Union'                
     `Universal_Aliasing'             - GNAT
     `Unmodified'                     - GNAT
     `Unreferenced'                   - GNAT
     `Unreferenced_Objects'           - GNAT
     `Unsuppress'                     
     `Value_Size'                     - GNAT
     `Volatile'                       
     `Volatile_Components'            
     `Warnings'                       - GNAT

     Note that for aspects with an expression, e.g. `Size', the
     expression is   treated like a default expression (visibility is
     analyzed at the point of   occurrence of the aspect, but
     evaluation of the expression occurs at the   freeze point of the
     entity involved.

     RM References:  3.02.01 (3)   3.02.02 (2)   3.03.01 (2/2)   3.08
     (6)   3.09.03 (1.1/2)   6.01 (2/2)   6.07 (2/2)   9.05.02 (2/2)
     7.01 (3)   7.03   (2)   7.03 (3)   9.01 (2/2)   9.01 (3/2)   9.04
     (2/2)   9.04 (3/2)   9.05.02 (2/2)   11.01 (2)   12.01 (3)   12.03
     (2/2)   12.04 (2/2)   12.05 (2)   12.06 (2.1/2)   12.06 (2.2/2)
     12.07 (2)   13.01 (0.1/2)   13.03 (5/1)   13.03.01 (0)

   * _AI-0128 Inequality is a primitive operation (0000-00-00)_ 

     If an equality operator ("=") is declared for a type, then the
     implicitly   declared inequality operator ("/=") is a primitive
     operation of the type.    This is the only reasonable
     interpretation, and is the one always implemented   by GNAT, but
     the RM was not entirely clear in making this point.

     RM References:  3.02.03 (6)   6.06 (6)

   * _AI-0003 Qualified expressions as names (2010-07-11)_ 

     In Ada 2012, a qualified expression is considered to be
     syntactically a name,    meaning that constructs such as
     `A'(F(X)).B' are now legal. This is    useful in disambiguating
     some cases of overloading.

     RM References:  3.03 (11)   3.03 (21)   4.01 (2)   4.04 (7)   4.07
     (3)   5.04 (7)

   * _AI-0120 Constant instance of protected object (0000-00-00)_ 

     This is an RM editorial change only. The section that lists
     objects that are   constant failed to include the current instance
     of a protected object   within a protected function. This has
     always been treated as a constant   in GNAT.

     RM References:  3.03 (21)

   * _AI-0008 General access to constrained objects (0000-00-00)_ 

     The wording in the RM implied that if you have a general access to
     a   constrained object, it could be used to modify the
     discriminants. This was   obviously not intended.
     `Constraint_Error' should be raised, and GNAT   has always done so
     in this situation.

     RM References:  3.03 (23)   3.10.02 (26/2)   4.01 (9)   6.04.01
     (17)   8.05.01 (5/2)

   * _AI-0093 Additional rules use immutably limited (0000-00-00)_ 

     This is an editorial change only, to make more widespread use of
     the Ada 2012   "immutably limited".

     RM References:  3.03 (23.4/3)

   * _AI-0096 Deriving from formal private types (2010-07-20)_ 

     In general it is illegal for a type derived from a formal limited
     type to be   nonlimited.  This AI makes an exception to this rule:
     derivation is legal   if it appears in the private part of the
     generic, and the formal type is not   tagged. If the type is
     tagged, the legality check must be applied to the   private part
     of the package.

     RM References:  3.04 (5.1/2)   6.02 (7)

   * _AI-0181 Soft hyphen is a non-graphic character (2010-07-23)_ 

     From Ada 2005 on, soft hyphen is considered a non-graphic
     character, which   means that it has a special name
     (`SOFT_HYPHEN') in conjunction with the   `Image' and `Value'
     attributes for the character types. Strictly   speaking this is an
     inconsistency with Ada 95, but in practice the use of   these
     attributes is so obscure that it will not cause problems.

     RM References:  3.05.02 (2/2)   A.01 (35/2)   A.03.03 (21)

   * _AI-0182 Additional forms for `Character'Value' (0000-00-00)_ 

     This AI allows `Character'Value' to accept the string `'?'' where
     `?' is any character including non-graphic control characters.
     GNAT has   always accepted such strings. It also allows strings
     such as   `HEX_00000041' to be accepted, but GNAT does not take
     advantage of this   permission and raises `Constraint_Error', as
     is certainly still   permitted.

     RM References:  3.05 (56/2)

   * _AI-0214 Defaulted discriminants for limited tagged (2010-10-01)_ 

     Ada 2012 relaxes the restriction that forbids discriminants of
     tagged types   to have default expressions by allowing them when
     the type is limited. It   is often useful to define a default
     value for a discriminant even though   it can't be changed by
     assignment.

     RM References:  3.07 (9.1/2)   3.07.02 (3)

   * _AI-0102 Some implicit conversions are illegal (0000-00-00)_ 

     It is illegal to assign an anonymous access constant to an
     anonymous access   variable. The RM did not have a clear rule to
     prevent this, but GNAT has   always generated an error for this
     usage.

     RM References:  3.07 (16)   3.07.01 (9)   6.04.01 (6)   8.06 (27/2)

   * _AI-0158 Generalizing membership tests (2010-09-16)_ 

     This AI extends the syntax of membership tests to simplify complex
     conditions   that can be expressed as membership in a subset of
     values of any type. It   introduces syntax for a list of
     expressions that may be used in loop contexts   as well.

     RM References:  3.08.01 (5)   4.04 (3)   4.05.02 (3)   4.05.02 (5)
      4.05.02 (27)

   * _AI-0173 Testing if tags represent abstract types (2010-07-03)_ 

     The function `Ada.Tags.Type_Is_Abstract' returns `True' if invoked
      with the tag of an abstract type, and `False' otherwise.

     RM References:  3.09 (7.4/2)   3.09 (12.4/2)

   * _AI-0076 function with controlling result (0000-00-00)_ 

     This is an editorial change only. The RM defines calls with
     controlling   results, but uses the term "function with
     controlling result" without an   explicit definition.

     RM References:  3.09.02 (2/2)

   * _AI-0126 Dispatching with no declared operation (0000-00-00)_ 

     This AI clarifies dispatching rules, and simply confirms that
     dispatching   executes the operation of the parent type when there
     is no explicitly or   implicitly declared operation for the
     descendant type. This has always been   the case in all versions
     of GNAT.

     RM References:  3.09.02 (20/2)   3.09.02 (20.1/2)   3.09.02
     (20.2/2)

   * _AI-0097 Treatment of abstract null extension (2010-07-19)_ 

     The RM as written implied that in some cases it was possible to
     create an   object of an abstract type, by having an abstract
     extension inherit a non-   abstract constructor from its parent
     type. This mistake has been corrected   in GNAT and in the RM, and
     this construct is now illegal.

     RM References:  3.09.03 (4/2)

   * _AI-0203 Extended return cannot be abstract (0000-00-00)_ 

     A return_subtype_indication cannot denote an abstract subtype.
     GNAT has never   permitted such usage.

     RM References:  3.09.03 (8/3)

   * _AI-0198 Inheriting abstract operators  (0000-00-00)_ 

     This AI resolves a conflict between two rules involving inherited
     abstract   operations and predefined operators. If a derived
     numeric type inherits   an abstract operator, it overrides the
     predefined one. This interpretation   was always the one
     implemented in GNAT.

     RM References:  3.09.03 (4/3)

   * _AI-0073 Functions returning abstract types (2010-07-10)_ 

     This AI covers a number of issues regarding returning abstract
     types. In   particular generic functions cannot have abstract
     result types or access   result types designated an abstract type.
     There are some other cases which   are detailed in the AI. Note
     that this binding interpretation has not been   retrofitted to
     operate before Ada 2012 mode, since it caused a significant
     number of regressions.

     RM References:  3.09.03 (8)   3.09.03 (10)   6.05 (8/2)

   * _AI-0070 Elaboration of interface types (0000-00-00)_ 

     This is an editorial change only, there are no testable
     consequences short of   checking for the absence of generated code
     for an interface declaration.

     RM References:  3.09.04 (18/2)

   * _AI-0208 Characteristics of incomplete views (0000-00-00)_ 

     The wording in the Ada 2005 RM concerning characteristics of
     incomplete views   was incorrect and implied that some programs
     intended to be legal were now   illegal. GNAT had never considered
     such programs illegal, so it has always   implemented the intent
     of this AI.

     RM References:  3.10.01 (2.4/2)   3.10.01 (2.6/2)

   * _AI-0162 Incomplete type completed by partial view (2010-09-15)_ 

     Incomplete types are made more useful by allowing them to be
     completed by   private types and private extensions.

     RM References:  3.10.01 (2.5/2)   3.10.01 (2.6/2)   3.10.01 (3)
     3.10.01 (4/2)

   * _AI-0098 Anonymous subprogram access restrictions (0000-00-00)_ 

     An unintentional omission in the RM implied some inconsistent
     restrictions on   the use of anonymous access to subprogram
     values. These restrictions were not   intentional, and have never
     been enforced by GNAT.

     RM References:  3.10.01 (6)   3.10.01 (9.2/2)

   * _AI-0199 Aggregate with anonymous access components (2010-07-14)_ 

     A choice list in a record aggregate can include several components
     of   (distinct) anonymous access types as long as they have
     matching designated   subtypes.

     RM References:  4.03.01 (16)

   * _AI-0220 Needed components for aggregates (0000-00-00)_ 

     This AI addresses a wording problem in the RM that appears to
     permit some   complex cases of aggregates with non-static
     discriminants. GNAT has always   implemented the intended
     semantics.

     RM References:  4.03.01 (17)

   * _AI-0147 Conditional expressions (2009-03-29)_ 

     Conditional expressions are permitted. The form of such an
     expression is:

              (if expr then expr {elsif expr then expr} [else expr])

     The parentheses can be omitted in contexts where parentheses are
     present   anyway, such as subprogram arguments and pragma
     arguments. If the else   clause is omitted, else True is assumed;
     thus `(if A then B)' is a way to conveniently represent   _(A
     implies B)_ in standard logic.

     RM References:  4.03.03 (15)   4.04 (1)   4.04 (7)   4.05.07 (0)
     4.07 (2)   4.07 (3)   4.09 (12)   4.09 (33)   5.03 (3)   5.03 (4)
     7.05 (2.1/2)

   * _AI-0037 Out-of-range box associations in aggregate (0000-00-00)_ 

     This AI confirms that an association of the form `Indx => <>' in an
      array aggregate must raise `Constraint_Error' if `Indx'   is out
     of range. The RM specified a range check on other associations, but
      not when the value of the association was defaulted. GNAT has
     always inserted   a constraint check on the index value.

     RM References:  4.03.03 (29)

   * _AI-0123 Composability of equality (2010-04-13)_ 

     Equality of untagged record composes, so that the predefined
     equality for a   composite type that includes a component of some
     untagged record type   `R' uses the equality operation of `R'
     (which may be user-defined   or predefined). This makes the
     behavior of untagged records identical to that   of tagged types
     in this respect.

     This change is an incompatibility with previous versions of Ada,
     but it   corrects a non-uniformity that was often a source of
     confusion. Analysis of   a large number of industrial programs
     indicates that in those rare cases   where a composite type had an
     untagged record component with a user-defined   equality, either
     there was no use of the composite equality, or else the code
     expected the same composability as for tagged types, and thus had
     a bug that   would be fixed by this change.

     RM References:  4.05.02 (9.7/2)   4.05.02 (14)   4.05.02 (15)
     4.05.02 (24)   8.05.04 (8)

   * _AI-0088 The value of exponentiation (0000-00-00)_ 

     This AI clarifies the equivalence rule given for the dynamic
     semantics of   exponentiation: the value of the operation can be
     obtained by repeated   multiplication, but the operation can be
     implemented otherwise (for example   using the familiar
     divide-by-two-and-square algorithm, even if this is less
     accurate), and does not imply repeated reads of a volatile base.

     RM References:  4.05.06 (11)

   * _AI-0188 Case expressions (2010-01-09)_ 

     Case expressions are permitted. This allows use of constructs such
     as:
            X := (case Y is when 1 => 2, when 2 => 3, when others => 31)

     RM References:  4.05.07 (0)   4.05.08 (0)   4.09 (12)   4.09 (33)

   * _AI-0104 Null exclusion and uninitialized allocator (2010-07-15)_ 

     The assignment `Ptr := new not null Some_Ptr;' will raise
     `Constraint_Error' because the default value of the allocated
     object is   null. This useless construct is illegal in Ada 2012.

     RM References:  4.08 (2)

   * _AI-0157 Allocation/Deallocation from empty pool (2010-07-11)_ 

     Allocation and Deallocation from an empty storage pool (i.e.
     allocation or   deallocation of a pointer for which a static
     storage size clause of zero   has been given) is now illegal and
     is detected as such. GNAT   previously gave a warning but not an
     error.

     RM References:  4.08 (5.3/2)   13.11.02 (4)   13.11.02 (17)

   * _AI-0179 Statement not required after label (2010-04-10)_ 

     It is not necessary to have a statement following a label, so a
     label   can appear at the end of a statement sequence without the
     need for putting a   null statement afterwards, but it is not
     allowable to have only labels and   no real statements in a
     statement sequence.

     RM References:  5.01 (2)

   * _AI-139-2 Syntactic sugar for iterators (2010-09-29)_ 

     The new syntax for iterating over arrays and containers is now
     implemented.    Iteration over containers is for now limited to
     read-only iterators. Only   default iterators are supported, with
     the syntax:  `for Elem of C'.

     RM References:  5.05

   * _AI-0134 Profiles must match for full conformance (0000-00-00)_ 

     For full conformance, the profiles of
     anonymous-access-to-subprogram   parameters must match. GNAT has
     always enforced this rule.

     RM References:  6.03.01 (18)

   * _AI-0207 Mode conformance and access constant (0000-00-00)_ 

     This AI confirms that access_to_constant indication must match for
     mode   conformance. This was implemented in GNAT when the
     qualifier was originally   introduced in Ada 2005.

     RM References:  6.03.01 (16/2)

   * _AI-0046 Null exclusion match for full conformance (2010-07-17)_ 

     For full conformance, in the case of access parameters, the null
     exclusion   must match (either both or neither must have `not
     null').

     RM References:  6.03.02 (18)

   * _AI-0118 The association of parameter associations (0000-00-00)_ 

     This AI clarifies the rules for named associations in subprogram
     calls and   generic instantiations. The rules have been in place
     since Ada 83.

     RM References:  6.04.01 (2)   12.03 (9)

   * _AI-0196 Null exclusion tests for out parameters (0000-00-00)_ 

     Null exclusion checks are not made for `out' parameters when
     evaluating the actual parameters. GNAT has never generated these
     checks.

     RM References:  6.04.01 (13)

   * _AI-0015 Constant return objects (0000-00-00)_ 

     The return object declared in an extended_return_statement may be
     declared constant. This was always intended, and GNAT has always
     allowed it.

     RM References:  6.05 (2.1/2)   3.03 (10/2)   3.03 (21)   6.05 (5/2)
      6.05 (5.7/2)

   * _AI-0032 Extended return for class-wide functions (0000-00-00)_ 

     If a function returns a class-wide type, the object of an extended
     return   statement can be declared with a specific type that is
     covered by the class-   wide type. This has been implemented in
     GNAT since the introduction of   extended returns. Note AI-0103
     complements this AI by imposing matching   rules for constrained
     return types.

     RM References:  6.05 (5.2/2)   6.05 (5.3/2)   6.05 (5.6/2)   6.05
     (5.8/2)   6.05 (8/2)

   * _AI-0103 Static matching for extended return (2010-07-23)_ 

     If the return subtype of a function is an elementary type or a
     constrained   type, the subtype indication in an extended return
     statement must match   statically this return subtype.

     RM References:  6.05 (5.2/2)

   * _AI-0058 Abnormal completion of an extended return (0000-00-00)_ 

     The RM had some incorrect wording implying wrong treatment of
     abnormal   completion in an extended return. GNAT has always
     implemented the intended   correct semantics as described by this
     AI.

     RM References:  6.05 (22/2)

   * _AI-0050 Raising Constraint_Error early for function call
     (0000-00-00)_ 

     The implementation permissions for raising `Constraint_Error'
     early on a function call when it was clear an exception would be
     raised were over-permissive and allowed mishandling of
     discriminants in some cases. GNAT did   not take advantage of
     these incorrect permissions in any case.

     RM References:  6.05 (24/2)

   * _AI-0125 Nonoverridable operations of an ancestor (2010-09-28)_ 

     In Ada 2012, the declaration of a primitive operation of a type
     extension   or private extension can also override an inherited
     primitive that is not   visible at the point of this declaration.

     RM References:  7.03.01 (6)   8.03 (23)   8.03.01 (5/2)   8.03.01
     (6/2)

   * _AI-0062 Null exclusions and deferred constants (0000-00-00)_ 

     A full constant may have a null exclusion even if its associated
     deferred   constant does not. GNAT has always allowed this.

     RM References:  7.04 (6/2)   7.04 (7.1/2)

   * _AI-0178 Incomplete views are limited (0000-00-00)_ 

     This AI clarifies the role of incomplete views and plugs an
     omission in the   RM. GNAT always correctly restricted the use of
     incomplete views and types.

     RM References:  7.05 (3/2)   7.05 (6/2)

   * _AI-0087 Actual for formal nonlimited derived type (2010-07-15)_ 

     The actual for a formal nonlimited derived type cannot be limited.
     In   particular, a formal derived type that extends a limited
     interface but which   is not explicitly limited cannot be
     instantiated with a limited type.

     RM References:  7.05 (5/2)   12.05.01 (5.1/2)

   * _AI-0099 Tag determines whether finalization needed (0000-00-00)_ 

     This AI clarifies that "needs finalization" is part of dynamic
     semantics,   and therefore depends on the run-time characteristics
     of an object (i.e. its   tag) and not on its nominal type. As the
     AI indicates: "we do not expect   this to affect any
     implementation".

     RM References:  7.06.01 (6)   7.06.01 (7)   7.06.01 (8)   7.06.01
     (9/2)

   * _AI-0064 Redundant finalization rule (0000-00-00)_ 

     This is an editorial change only. The intended behavior is already
     checked   by an existing ACATS test, which GNAT has always
     executed correctly.

     RM References:  7.06.01 (17.1/1)

   * _AI-0026 Missing rules for Unchecked_Union (2010-07-07)_ 

     Record representation clauses concerning Unchecked_Union types
     cannot mention   the discriminant of the type. The type of a
     component declared in the variant   part of an Unchecked_Union
     cannot be controlled, have controlled components,   nor have
     protected or task parts. If an Unchecked_Union type is declared
     within the body of a generic unit or its descendants, then the
     type of a   component declared in the variant part cannot be a
     formal private type or a   formal private extension declared
     within the same generic unit.

     RM References:  7.06 (9.4/2)   B.03.03 (9/2)   B.03.03 (10/2)

   * _AI-0205 Extended return declares visible name (0000-00-00)_ 

     This AI corrects a simple omission in the RM. Return objects have
     always   been visible within an extended return statement.

     RM References:  8.03 (17)

   * _AI-0042 Overriding versus implemented-by (0000-00-00)_ 

     This AI fixes a wording gap in the RM. An operation of a
     synchronized   interface can be implemented by a protected or task
     entry, but the abstract   operation is not being overridden in the
     usual sense, and it must be stated   separately that this
     implementation is legal. This has always been the case   in GNAT.

     RM References:  9.01 (9.2/2)   9.04 (11.1/2)

   * _AI-0030 Requeue on synchronized interfaces (2010-07-19)_ 

     Requeue is permitted to a protected, synchronized or task
     interface primitive   providing it is known that the overriding
     operation is an entry. Otherwise   the requeue statement has the
     same effect as a procedure call. Use of pragma   `Implemented'
     provides a way to impose a static requirement on the   overriding
     operation by adhering to one of the implementation kinds: entry,
     protected procedure or any of the above.

     RM References:  9.05 (9)   9.05.04 (2)   9.05.04 (3)   9.05.04 (5)
      9.05.04 (6)   9.05.04 (7)   9.05.04 (12)

   * _AI-0201 Independence of atomic object components (2010-07-22)_ 

     If an Atomic object has a pragma `Pack' or a `Component_Size'
     attribute, then individual components may not be addressable by
     independent   tasks. However, if the representation clause has no
     effect (is confirming),   then independence is not compromised.
     Furthermore, in GNAT, specification of   other appropriately
     addressable component sizes (e.g. 16 for 8-bit   characters) also
     preserves independence. GNAT now gives very clear warnings   both
     for the declaration of such a type, and for any assignment to its
     components.

     RM References:  9.10 (1/3)   C.06 (22/2)   C.06 (23/2)

   * _AI-0009 Pragma Independent[_Components] (2010-07-23)_ 

     This AI introduces the new pragmas `Independent' and
     `Independent_Components',   which control guaranteeing
     independence of access to objects and components.    The AI also
     requires independence not unaffected by confirming rep clauses.

     RM References:  9.10 (1)   13.01 (15/1)   13.02 (9)   13.03 (13)
     C.06 (2)   C.06 (4)   C.06 (6)   C.06 (9)   C.06 (13)   C.06 (14)

   * _AI-0072 Task signalling using 'Terminated (0000-00-00)_ 

     This AI clarifies that task signalling for reading `'Terminated'
     only   occurs if the result is True. GNAT semantics has always
     been consistent with   this notion of task signalling.

     RM References:  9.10 (6.1/1)

   * _AI-0108 Limited incomplete view and discriminants (0000-00-00)_ 

     This AI confirms that an incomplete type from a limited view does
     not have   discriminants. This has always been the case in GNAT.

     RM References:  10.01.01 (12.3/2)

   * _AI-0129 Limited views and incomplete types (0000-00-00)_ 

     This AI clarifies the description of limited views: a limited view
     of a   package includes only one view of a type that has an
     incomplete declaration   and a full declaration (there is no
     possible ambiguity in a client package).    This AI also fixes an
     omission: a nested package in the private part has no   limited
     view. GNAT always implemented this correctly.

     RM References:  10.01.01 (12.2/2)   10.01.01 (12.3/2)

   * _AI-0077 Limited withs and scope of declarations (0000-00-00)_ 

     This AI clarifies that a declaration does not include a context
     clause,   and confirms that it is illegal to have a context in
     which both a limited   and a nonlimited view of a package are
     accessible. Such double visibility   was always rejected by GNAT.

     RM References:  10.01.02 (12/2)   10.01.02 (21/2)   10.01.02 (22/2)

   * _AI-0122 Private with and children of generics (0000-00-00)_ 

     This AI clarifies the visibility of private children of generic
     units within   instantiations of a parent. GNAT has always handled
     this correctly.

     RM References:  10.01.02 (12/2)

   * _AI-0040 Limited with clauses on descendant (0000-00-00)_ 

     This AI confirms that a limited with clause in a child unit cannot
     name   an ancestor of the unit. This has always been checked in
     GNAT.

     RM References:  10.01.02 (20/2)

   * _AI-0132 Placement of library unit pragmas (0000-00-00)_ 

     This AI fills a gap in the description of library unit pragmas.
     The pragma   clearly must apply to a library unit, even if it does
     not carry the name   of the enclosing unit. GNAT has always
     enforced the required check.

     RM References:  10.01.05 (7)

   * _AI-0034 Categorization of limited views (0000-00-00)_ 

     The RM makes certain limited with clauses illegal because of
     categorization   considerations, when the corresponding normal
     with would be legal. This is   not intended, and GNAT has always
     implemented the recommended behavior.

     RM References:  10.02.01 (11/1)   10.02.01 (17/2)

   * _AI-0035 Inconsistencies with Pure units (0000-00-00)_ 

     This AI remedies some inconsistencies in the legality rules for
     Pure units.    Derived access types are legal in a pure unit (on
     the assumption that the   rule for a zero storage pool size has
     been enforced on the ancestor type).    The rules are enforced in
     generic instances and in subunits. GNAT has always   implemented
     the recommended behavior.

     RM References:  10.02.01 (15.1/2)   10.02.01 (15.4/2)   10.02.01
     (15.5/2)   10.02.01 (17/2)

   * _AI-0219 Pure permissions and limited parameters (2010-05-25)_ 

     This AI refines the rules for the cases with limited parameters
     which do not   allow the implementations to omit "redundant". GNAT
     now properly conforms   to the requirements of this binding
     interpretation.

     RM References:  10.02.01 (18/2)

   * _AI-0043 Rules about raising exceptions (0000-00-00)_ 

     This AI covers various omissions in the RM regarding the raising of
      exceptions. GNAT has always implemented the intended semantics.

     RM References:  11.04.01 (10.1/2)   11 (2)

   * _AI-0200 Mismatches in formal package declarations (0000-00-00)_ 

     This AI plugs a gap in the RM which appeared to allow some
     obviously intended   illegal instantiations. GNAT has never
     allowed these instantiations.

     RM References:  12.07 (16)

   * _AI-0112 Detection of duplicate pragmas (2010-07-24)_ 

     This AI concerns giving names to various representation aspects,
     but the   practical effect is simply to make the use of duplicate
     `Atomic'[`_Components'],   `Volatile'[`_Components'] and
     `Independent'[`_Components'] pragmas illegal, and GNAT   now
     performs this required check.

     RM References:  13.01 (8)

   * _AI-0106 No representation pragmas on generic formals (0000-00-00)_ 

     The RM appeared to allow representation pragmas on generic formal
     parameters,   but this was not intended, and GNAT has never
     permitted this usage.

     RM References:  13.01 (9.1/1)

   * _AI-0012 Pack/Component_Size for aliased/atomic (2010-07-15)_ 

     It is now illegal to give an inappropriate component size or a
     pragma   `Pack' that attempts to change the component size in the
     case of atomic   or aliased components. Previously GNAT ignored
     such an attempt with a   warning.

     RM References:  13.02 (6.1/2)   13.02 (7)   C.06 (10)   C.06 (11)
     C.06 (21)

   * _AI-0039 Stream attributes cannot be dynamic (0000-00-00)_ 

     The RM permitted the use of dynamic expressions (such as `ptr.all)'
      for stream attributes, but these were never useful and are now
     illegal. GNAT   has always regarded such expressions as illegal.

     RM References:  13.03 (4)   13.03 (6)   13.13.02 (38/2)

   * _AI-0095 Address of intrinsic subprograms (0000-00-00)_ 

     The prefix of `'Address' cannot statically denote a subprogram with
      convention `Intrinsic'. The use of the `Address' attribute raises
      `Program_Error' if the prefix denotes a subprogram with
     convention   `Intrinsic'.

     RM References:  13.03 (11/1)

   * _AI-0116 Alignment of class-wide objects (0000-00-00)_ 

     This AI requires that the alignment of a class-wide object be no
     greater   than the alignment of any type in the class. GNAT has
     always followed this   recommendation.

     RM References:  13.03 (29)   13.11 (16)

   * _AI-0146 Type invariants (2009-09-21)_ 

     Type invariants may be specified for private types using the
     aspect notation.    Aspect `Invariant' may be specified for any
     private type,   `Invariant'Class' can   only be specified for
     tagged types, and is inherited by any descendent of the   tagged
     types. The invariant is a boolean expression that is tested for
     being   true in the following situations: conversions to the
     private type, object   declarations for the private type that are
     default initialized, and   [in] out   parameters and returned
     result on return from any primitive operation for   the type that
     is visible to a client.

     RM References:  13.03.03 (00)

   * _AI-0078 Relax Unchecked_Conversion alignment rules (0000-00-00)_ 

     In Ada 2012, compilers are required to support unchecked
     conversion where the   target alignment is a multiple of the
     source alignment. GNAT always supported   this case (and indeed
     all cases of differing alignments, doing copies where   required
     if the alignment was reduced).

     RM References:  13.09 (7)

   * _AI-0195 Invalid value handling is implementation defined
     (2010-07-03)_ 

     The handling of invalid values is now designated to be
     implementation   defined. This is a documentation change only,
     requiring Annex M in the GNAT   Reference Manual to document this
     handling.    In GNAT, checks for invalid values are made   only
     when necessary to avoid erroneous behavior. Operations like
     assignments   which cannot cause erroneous behavior ignore the
     possibility of invalid   values and do not do a check. The date
     given above applies only to the   documentation change, this
     behavior has always been implemented by GNAT.

     RM References:  13.09.01 (10)

   * _AI-0193 Alignment of allocators (2010-09-16)_ 

     This AI introduces a new attribute `Max_Alignment_For_Allocation',
      analogous to `Max_Size_In_Storage_Elements', but for alignment
     instead   of size.

     RM References:  13.11 (16)   13.11 (21)   13.11.01 (0)   13.11.01
     (1)   13.11.01 (2)   13.11.01 (3)

   * _AI-0177 Parameterized expressions (2010-07-10)_ 

     The new Ada 2012 notion of parameterized expressions is
     implemented. The form   is:
            function specification is (expression)

     This is exactly equivalent to the   corresponding function body
     that returns the expression, but it can appear   in a package
     spec. Note that the expression must be parenthesized.

     RM References:  13.11.01 (3/2)

   * _AI-0033 Attach/Interrupt_Handler in generic (2010-07-24)_ 

     Neither of these two pragmas may appear within a generic template,
     because   the generic might be instantiated at other than the
     library level.

     RM References:  13.11.02 (16)   C.03.01 (7/2)   C.03.01 (8/2)

   * _AI-0161 Restriction No_Default_Stream_Attributes (2010-09-11)_ 

     A new restriction `No_Default_Stream_Attributes' prevents the use
     of any   of the default stream attributes for elementary types. If
     this restriction is   in force, then it is necessary to provide
     explicit subprograms for any   stream attributes used.

     RM References:  13.12.01 (4/2)   13.13.02 (40/2)   13.13.02 (52/2)

   * _AI-0194 Value of Stream_Size attribute (0000-00-00)_ 

     The `Stream_Size' attribute returns the default number of bits in
     the   stream representation of the given type.    This value is
     not affected by the presence   of stream subprogram attributes for
     the type. GNAT has always implemented   this interpretation.

     RM References:  13.13.02 (1.2/2)

   * _AI-0109 Redundant check in S'Class'Input (0000-00-00)_ 

     This AI is an editorial change only. It removes the need for a tag
     check   that can never fail.

     RM References:  13.13.02 (34/2)

   * _AI-0007 Stream read and private scalar types (0000-00-00)_ 

     The RM as written appeared to limit the possibilities of declaring
     read   attribute procedures for private scalar types. This
     limitation was not   intended, and has never been enforced by GNAT.

     RM References:  13.13.02 (50/2)   13.13.02 (51/2)

   * _AI-0065 Remote access types and external streaming (0000-00-00)_ 

     This AI clarifies the fact that all remote access types support
     external   streaming. This fixes an obvious oversight in the
     definition of the   language, and GNAT always implemented the
     intended correct rules.

     RM References:  13.13.02 (52/2)

   * _AI-0019 Freezing of primitives for tagged types (0000-00-00)_ 

     The RM suggests that primitive subprograms of a specific tagged
     type are   frozen when the tagged type is frozen. This would be an
     incompatible change   and is not intended. GNAT has never
     attempted this kind of freezing and its   behavior is consistent
     with the recommendation of this AI.

     RM References:  13.14 (2)   13.14 (3/1)   13.14 (8.1/1)   13.14
     (10)   13.14 (14)   13.14 (15.1/2)

   * _AI-0017 Freezing and incomplete types (0000-00-00)_ 

     So-called "Taft-amendment types" (i.e., types that are completed
     in package   bodies) are not frozen by the occurrence of bodies in
     the   enclosing declarative part. GNAT always implemented this
     properly.

     RM References:  13.14 (3/1)

   * _AI-0060 Extended definition of remote access types (0000-00-00)_ 

     This AI extends the definition of remote access types to include
     access   to limited, synchronized, protected or task class-wide
     interface types.    GNAT already implemented this extension.

     RM References:  A (4)   E.02.02 (9/1)   E.02.02 (9.2/1)   E.02.02
     (14/2)   E.02.02 (18)

   * _AI-0114 Classification of letters (0000-00-00)_ 

     The code points 170 (`FEMININE ORDINAL INDICATOR'),   181 (`MICRO
     SIGN'), and   186 (`MASCULINE ORDINAL INDICATOR') are technically
     considered   lower case letters by Unicode.    However, they are
     not allowed in identifiers, and they   return `False' to
     `Ada.Characters.Handling.Is_Letter/Is_Lower'.    This behavior is
     consistent with that defined in Ada 95.

     RM References:  A.03.02 (59)   A.04.06 (7)

   * _AI-0185 Ada.Wide_[Wide_]Characters.Handling (2010-07-06)_ 

     Two new packages `Ada.Wide_[Wide_]Characters.Handling' provide
     classification functions for `Wide_Character' and
     `Wide_Wide_Character', as well as providing   case folding
     routines for `Wide_[Wide_]Character' and   `Wide_[Wide_]String'.

     RM References:  A.03.05 (0)   A.03.06 (0)

   * _AI-0031 Add From parameter to Find_Token (2010-07-25)_ 

     A new version of `Find_Token' is added to all relevant string
     packages,   with an extra parameter `From'. Instead of starting at
     the first   character of the string, the search for a matching
     Token starts at the   character indexed by the value of `From'.
     These procedures are available in all versions of Ada   but if
     used in versions earlier than Ada 2012 they will generate a warning
      that an Ada 2012 subprogram is being used.

     RM References:  A.04.03 (16)   A.04.03 (67)   A.04.03 (68/1)
     A.04.04 (51)   A.04.05 (46)

   * _AI-0056 Index on null string returns zero (0000-00-00)_ 

     The wording in the Ada 2005 RM implied an incompatible handling of
     the   `Index' functions, resulting in raising an exception instead
     of   returning zero in some situations.    This was not intended
     and has been corrected.    GNAT always returned zero, and is thus
     consistent with this AI.

     RM References:  A.04.03 (56.2/2)   A.04.03 (58.5/2)

   * _AI-0137 String encoding package (2010-03-25)_ 

     The packages `Ada.Strings.UTF_Encoding', together with its child
     packages, `Conversions', `Strings', `Wide_Strings',   and
     `Wide_Wide_Strings' have been   implemented. These packages (whose
     documentation can be found in the spec   files `a-stuten.ads',
     `a-suenco.ads', `a-suenst.ads',   `a-suewst.ads', `a-suezst.ads')
     allow encoding and decoding of   `String', `Wide_String', and
     `Wide_Wide_String'   values using UTF coding schemes (including
     UTF-8, UTF-16LE, UTF-16BE, and   UTF-16), as well as conversions
     between the different UTF encodings. With   the exception of
     `Wide_Wide_Strings', these packages are available in   Ada 95 and
     Ada 2005 mode as well as Ada 2012 mode.    The `Wide_Wide_Strings
     package'   is available in Ada 2005 mode as well as Ada 2012 mode
     (but not in Ada 95   mode since it uses `Wide_Wide_Character').

     RM References:  A.04.11

   * _AI-0038 Minor errors in Text_IO (0000-00-00)_ 

     These are minor errors in the description on three points. The
     intent on   all these points has always been clear, and GNAT has
     always implemented the   correct intended semantics.

     RM References:  A.10.05 (37)   A.10.07 (8/1)   A.10.07 (10)
     A.10.07 (12)   A.10.08 (10)   A.10.08 (24)

   * _AI-0044 Restrictions on container instantiations (0000-00-00)_ 

     This AI places restrictions on allowed instantiations of generic
     containers.    These restrictions are not checked by the compiler,
     so there is nothing to   change in the implementation. This
     affects only the RM documentation.

     RM References:  A.18 (4/2)   A.18.02 (231/2)   A.18.03 (145/2)
     A.18.06 (56/2)   A.18.08 (66/2)   A.18.09 (79/2)   A.18.26 (5/2)
     A.18.26 (9/2)

   * _AI-0127 Adding Locale Capabilities (2010-09-29)_ 

     This package provides an interface for identifying the current
     locale.

     RM References:  A.19    A.19.01    A.19.02    A.19.03    A.19.05
     A.19.06   A.19.07    A.19.08    A.19.09    A.19.10    A.19.11
     A.19.12    A.19.13

   * _AI-0002 Export C with unconstrained arrays (0000-00-00)_ 

     The compiler is not required to support exporting an Ada
     subprogram with   convention C if there are parameters or a return
     type of an unconstrained   array type (such as `String'). GNAT
     allows such declarations but   generates warnings. It is possible,
     but complicated, to write the   corresponding C code and certainly
     such code would be specific to GNAT and   non-portable.

     RM References:  B.01 (17)   B.03 (62)   B.03 (71.1/2)

   * _AI-0216 No_Task_Hierarchy forbids local tasks (0000-00-00)_ 

     It is clearly the intention that `No_Task_Hierarchy' is intended to
      forbid tasks declared locally within subprograms, or functions
     returning task   objects, and that is the implementation that GNAT
     has always provided.    However the language in the RM was not
     sufficiently clear on this point.    Thus this is a documentation
     change in the RM only.

     RM References:  D.07 (3/3)

   * _AI-0211 No_Relative_Delays forbids Set_Handler use (2010-07-09)_ 

     The restriction `No_Relative_Delays' forbids any calls to the
     subprogram   `Ada.Real_Time.Timing_Events.Set_Handler'.

     RM References:  D.07 (5)   D.07 (10/2)   D.07 (10.4/2)   D.07
     (10.7/2)

   * _AI-0190 pragma Default_Storage_Pool (2010-09-15)_ 

     This AI introduces a new pragma `Default_Storage_Pool', which can
     be   used to control storage pools globally.    In particular, you
     can force every access   type that is used for allocation (new) to
     have an explicit storage pool,   or you can declare a pool
     globally to be used for all access types that lack   an explicit
     one.

     RM References:  D.07 (8)

   * _AI-0189 No_Allocators_After_Elaboration (2010-01-23)_ 

     This AI introduces a new restriction
     `No_Allocators_After_Elaboration',   which says that no dynamic
     allocation will occur once elaboration is   completed.    In
     general this requires a run-time check, which is not required, and
     which   GNAT does not attempt. But the static cases of allocators
     in a task body or   in the body of the main program are detected
     and flagged at compile or bind   time.

     RM References:  D.07 (19.1/2)   H.04 (23.3/2)

   * _AI-0171 Pragma CPU and Ravenscar Profile (2010-09-24)_ 

     A new package `System.Multiprocessors' is added, together with the
      definition of pragma `CPU' for controlling task affinity. A new
     no   dependence restriction, on
     `System.Multiprocessors.Dispatching_Domains',   is added to the
     Ravenscar profile.

     RM References:  D.13.01 (4/2)   D.16

   * _AI-0210 Correct Timing_Events metric (0000-00-00)_ 

     This is a documentation only issue regarding wording of metric
     requirements,   that does not affect the implementation of the
     compiler.

     RM References:  D.15 (24/2)

   * _AI-0206 Remote types packages and preelaborate (2010-07-24)_ 

     Remote types packages are now allowed to depend on preelaborated
     packages.    This was formerly considered illegal.

     RM References:  E.02.02 (6)

   * _AI-0152 Restriction No_Anonymous_Allocators (2010-09-08)_ 

     Restriction `No_Anonymous_Allocators' prevents the use of
     allocators   where the type of the returned value is an anonymous
     access type.

     RM References:  H.04 (8/1)


File: gnat_rm.info,  Node: Obsolescent Features,  Next: GNU Free Documentation License,  Prev: Implementation of Ada 2012 Features,  Up: Top

15 Obsolescent Features
***********************

This chapter describes features that are provided by GNAT, but are
considered obsolescent since there are preferred ways of achieving the
same effect. These features are provided solely for historical
compatibility purposes.

* Menu:

* pragma No_Run_Time::
* pragma Ravenscar::
* pragma Restricted_Run_Time::


File: gnat_rm.info,  Node: pragma No_Run_Time,  Next: pragma Ravenscar,  Up: Obsolescent Features

15.1 pragma No_Run_Time
=======================

The pragma `No_Run_Time' is used to achieve an affect similar to the
use of the "Zero Foot Print" configurable run time, but without
requiring a specially configured run time. The result of using this
pragma, which must be used for all units in a partition, is to restrict
the use of any language features requiring run-time support code. The
preferred usage is to use an appropriately configured run-time that
includes just those features that are to be made accessible.


File: gnat_rm.info,  Node: pragma Ravenscar,  Next: pragma Restricted_Run_Time,  Prev: pragma No_Run_Time,  Up: Obsolescent Features

15.2 pragma Ravenscar
=====================

The pragma `Ravenscar' has exactly the same effect as pragma `Profile
(Ravenscar)'. The latter usage is preferred since it is part of the new
Ada 2005 standard.


File: gnat_rm.info,  Node: pragma Restricted_Run_Time,  Prev: pragma Ravenscar,  Up: Obsolescent Features

15.3 pragma Restricted_Run_Time
===============================

The pragma `Restricted_Run_Time' has exactly the same effect as pragma
`Profile (Restricted)'. The latter usage is preferred since the Ada
2005 pragma `Profile' is intended for this kind of implementation
dependent addition.


File: gnat_rm.info,  Node: GNU Free Documentation License,  Next: Index,  Prev: Obsolescent Features,  Up: Top

GNU Free Documentation License
******************************

                     Version 1.3, 3 November 2008

     Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
     `http://fsf.org/'

     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

  0. PREAMBLE

     The purpose of this License is to make a manual, textbook, or other
     functional and useful document "free" in the sense of freedom: to
     assure everyone the effective freedom to copy and redistribute it,
     with or without modifying it, either commercially or
     noncommercially.  Secondarily, this License preserves for the
     author and publisher a way to get credit for their work, while not
     being considered responsible for modifications made by others.

     This License is a kind of "copyleft", which means that derivative
     works of the document must themselves be free in the same sense.
     It complements the GNU General Public License, which is a copyleft
     license designed for free software.

     We have designed this License in order to use it for manuals for
     free software, because free software needs free documentation: a
     free program should come with manuals providing the same freedoms
     that the software does.  But this License is not limited to
     software manuals; it can be used for any textual work, regardless
     of subject matter or whether it is published as a printed book.
     We recommend this License principally for works whose purpose is
     instruction or reference.

  1. APPLICABILITY AND DEFINITIONS

     This License applies to any manual or other work, in any medium,
     that contains a notice placed by the copyright holder saying it
     can be distributed under the terms of this License.  Such a notice
     grants a world-wide, royalty-free license, unlimited in duration,
     to use that work under the conditions stated herein.  The
     "Document", below, refers to any such manual or work.  Any member
     of the public is a licensee, and is addressed as "you".  You
     accept the license if you copy, modify or distribute the work in a
     way requiring permission under copyright law.

     A "Modified Version" of the Document means any work containing the
     Document or a portion of it, either copied verbatim, or with
     modifications and/or translated into another language.

     A "Secondary Section" is a named appendix or a front-matter section
     of the Document that deals exclusively with the relationship of the
     publishers or authors of the Document to the Document's overall
     subject (or to related matters) and contains nothing that could
     fall directly within that overall subject.  (Thus, if the Document
     is in part a textbook of mathematics, a Secondary Section may not
     explain any mathematics.)  The relationship could be a matter of
     historical connection with the subject or with related matters, or
     of legal, commercial, philosophical, ethical or political position
     regarding them.

     The "Invariant Sections" are certain Secondary Sections whose
     titles are designated, as being those of Invariant Sections, in
     the notice that says that the Document is released under this
     License.  If a section does not fit the above definition of
     Secondary then it is not allowed to be designated as Invariant.
     The Document may contain zero Invariant Sections.  If the Document
     does not identify any Invariant Sections then there are none.

     The "Cover Texts" are certain short passages of text that are
     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
     that says that the Document is released under this License.  A
     Front-Cover Text may be at most 5 words, and a Back-Cover Text may
     be at most 25 words.

     A "Transparent" copy of the Document means a machine-readable copy,
     represented in a format whose specification is available to the
     general public, that is suitable for revising the document
     straightforwardly with generic text editors or (for images
     composed of pixels) generic paint programs or (for drawings) some
     widely available drawing editor, and that is suitable for input to
     text formatters or for automatic translation to a variety of
     formats suitable for input to text formatters.  A copy made in an
     otherwise Transparent file format whose markup, or absence of
     markup, has been arranged to thwart or discourage subsequent
     modification by readers is not Transparent.  An image format is
     not Transparent if used for any substantial amount of text.  A
     copy that is not "Transparent" is called "Opaque".

     Examples of suitable formats for Transparent copies include plain
     ASCII without markup, Texinfo input format, LaTeX input format,
     SGML or XML using a publicly available DTD, and
     standard-conforming simple HTML, PostScript or PDF designed for
     human modification.  Examples of transparent image formats include
     PNG, XCF and JPG.  Opaque formats include proprietary formats that
     can be read and edited only by proprietary word processors, SGML or
     XML for which the DTD and/or processing tools are not generally
     available, and the machine-generated HTML, PostScript or PDF
     produced by some word processors for output purposes only.

     The "Title Page" means, for a printed book, the title page itself,
     plus such following pages as are needed to hold, legibly, the
     material this License requires to appear in the title page.  For
     works in formats which do not have any title page as such, "Title
     Page" means the text near the most prominent appearance of the
     work's title, preceding the beginning of the body of the text.

     The "publisher" means any person or entity that distributes copies
     of the Document to the public.

     A section "Entitled XYZ" means a named subunit of the Document
     whose title either is precisely XYZ or contains XYZ in parentheses
     following text that translates XYZ in another language.  (Here XYZ
     stands for a specific section name mentioned below, such as
     "Acknowledgements", "Dedications", "Endorsements", or "History".)
     To "Preserve the Title" of such a section when you modify the
     Document means that it remains a section "Entitled XYZ" according
     to this definition.

     The Document may include Warranty Disclaimers next to the notice
     which states that this License applies to the Document.  These
     Warranty Disclaimers are considered to be included by reference in
     this License, but only as regards disclaiming warranties: any other
     implication that these Warranty Disclaimers may have is void and
     has no effect on the meaning of this License.

  2. VERBATIM COPYING

     You may copy and distribute the Document in any medium, either
     commercially or noncommercially, provided that this License, the
     copyright notices, and the license notice saying this License
     applies to the Document are reproduced in all copies, and that you
     add no other conditions whatsoever to those of this License.  You
     may not use technical measures to obstruct or control the reading
     or further copying of the copies you make or distribute.  However,
     you may accept compensation in exchange for copies.  If you
     distribute a large enough number of copies you must also follow
     the conditions in section 3.

     You may also lend copies, under the same conditions stated above,
     and you may publicly display copies.

  3. COPYING IN QUANTITY

     If you publish printed copies (or copies in media that commonly
     have printed covers) of the Document, numbering more than 100, and
     the Document's license notice requires Cover Texts, you must
     enclose the copies in covers that carry, clearly and legibly, all
     these Cover Texts: Front-Cover Texts on the front cover, and
     Back-Cover Texts on the back cover.  Both covers must also clearly
     and legibly identify you as the publisher of these copies.  The
     front cover must present the full title with all words of the
     title equally prominent and visible.  You may add other material
     on the covers in addition.  Copying with changes limited to the
     covers, as long as they preserve the title of the Document and
     satisfy these conditions, can be treated as verbatim copying in
     other respects.

     If the required texts for either cover are too voluminous to fit
     legibly, you should put the first ones listed (as many as fit
     reasonably) on the actual cover, and continue the rest onto
     adjacent pages.

     If you publish or distribute Opaque copies of the Document
     numbering more than 100, you must either include a
     machine-readable Transparent copy along with each Opaque copy, or
     state in or with each Opaque copy a computer-network location from
     which the general network-using public has access to download
     using public-standard network protocols a complete Transparent
     copy of the Document, free of added material.  If you use the
     latter option, you must take reasonably prudent steps, when you
     begin distribution of Opaque copies in quantity, to ensure that
     this Transparent copy will remain thus accessible at the stated
     location until at least one year after the last time you
     distribute an Opaque copy (directly or through your agents or
     retailers) of that edition to the public.

     It is requested, but not required, that you contact the authors of
     the Document well before redistributing any large number of
     copies, to give them a chance to provide you with an updated
     version of the Document.

  4. MODIFICATIONS

     You may copy and distribute a Modified Version of the Document
     under the conditions of sections 2 and 3 above, provided that you
     release the Modified Version under precisely this License, with
     the Modified Version filling the role of the Document, thus
     licensing distribution and modification of the Modified Version to
     whoever possesses a copy of it.  In addition, you must do these
     things in the Modified Version:

       A. Use in the Title Page (and on the covers, if any) a title
          distinct from that of the Document, and from those of
          previous versions (which should, if there were any, be listed
          in the History section of the Document).  You may use the
          same title as a previous version if the original publisher of
          that version gives permission.

       B. List on the Title Page, as authors, one or more persons or
          entities responsible for authorship of the modifications in
          the Modified Version, together with at least five of the
          principal authors of the Document (all of its principal
          authors, if it has fewer than five), unless they release you
          from this requirement.

       C. State on the Title page the name of the publisher of the
          Modified Version, as the publisher.

       D. Preserve all the copyright notices of the Document.

       E. Add an appropriate copyright notice for your modifications
          adjacent to the other copyright notices.

       F. Include, immediately after the copyright notices, a license
          notice giving the public permission to use the Modified
          Version under the terms of this License, in the form shown in
          the Addendum below.

       G. Preserve in that license notice the full lists of Invariant
          Sections and required Cover Texts given in the Document's
          license notice.

       H. Include an unaltered copy of this License.

       I. Preserve the section Entitled "History", Preserve its Title,
          and add to it an item stating at least the title, year, new
          authors, and publisher of the Modified Version as given on
          the Title Page.  If there is no section Entitled "History" in
          the Document, create one stating the title, year, authors,
          and publisher of the Document as given on its Title Page,
          then add an item describing the Modified Version as stated in
          the previous sentence.

       J. Preserve the network location, if any, given in the Document
          for public access to a Transparent copy of the Document, and
          likewise the network locations given in the Document for
          previous versions it was based on.  These may be placed in
          the "History" section.  You may omit a network location for a
          work that was published at least four years before the
          Document itself, or if the original publisher of the version
          it refers to gives permission.

       K. For any section Entitled "Acknowledgements" or "Dedications",
          Preserve the Title of the section, and preserve in the
          section all the substance and tone of each of the contributor
          acknowledgements and/or dedications given therein.

       L. Preserve all the Invariant Sections of the Document,
          unaltered in their text and in their titles.  Section numbers
          or the equivalent are not considered part of the section
          titles.

       M. Delete any section Entitled "Endorsements".  Such a section
          may not be included in the Modified Version.

       N. Do not retitle any existing section to be Entitled
          "Endorsements" or to conflict in title with any Invariant
          Section.

       O. Preserve any Warranty Disclaimers.

     If the Modified Version includes new front-matter sections or
     appendices that qualify as Secondary Sections and contain no
     material copied from the Document, you may at your option
     designate some or all of these sections as invariant.  To do this,
     add their titles to the list of Invariant Sections in the Modified
     Version's license notice.  These titles must be distinct from any
     other section titles.

     You may add a section Entitled "Endorsements", provided it contains
     nothing but endorsements of your Modified Version by various
     parties--for example, statements of peer review or that the text
     has been approved by an organization as the authoritative
     definition of a standard.

     You may add a passage of up to five words as a Front-Cover Text,
     and a passage of up to 25 words as a Back-Cover Text, to the end
     of the list of Cover Texts in the Modified Version.  Only one
     passage of Front-Cover Text and one of Back-Cover Text may be
     added by (or through arrangements made by) any one entity.  If the
     Document already includes a cover text for the same cover,
     previously added by you or by arrangement made by the same entity
     you are acting on behalf of, you may not add another; but you may
     replace the old one, on explicit permission from the previous
     publisher that added the old one.

     The author(s) and publisher(s) of the Document do not by this
     License give permission to use their names for publicity for or to
     assert or imply endorsement of any Modified Version.

  5. COMBINING DOCUMENTS

     You may combine the Document with other documents released under
     this License, under the terms defined in section 4 above for
     modified versions, provided that you include in the combination
     all of the Invariant Sections of all of the original documents,
     unmodified, and list them all as Invariant Sections of your
     combined work in its license notice, and that you preserve all
     their Warranty Disclaimers.

     The combined work need only contain one copy of this License, and
     multiple identical Invariant Sections may be replaced with a single
     copy.  If there are multiple Invariant Sections with the same name
     but different contents, make the title of each such section unique
     by adding at the end of it, in parentheses, the name of the
     original author or publisher of that section if known, or else a
     unique number.  Make the same adjustment to the section titles in
     the list of Invariant Sections in the license notice of the
     combined work.

     In the combination, you must combine any sections Entitled
     "History" in the various original documents, forming one section
     Entitled "History"; likewise combine any sections Entitled
     "Acknowledgements", and any sections Entitled "Dedications".  You
     must delete all sections Entitled "Endorsements."

  6. COLLECTIONS OF DOCUMENTS

     You may make a collection consisting of the Document and other
     documents released under this License, and replace the individual
     copies of this License in the various documents with a single copy
     that is included in the collection, provided that you follow the
     rules of this License for verbatim copying of each of the
     documents in all other respects.

     You may extract a single document from such a collection, and
     distribute it individually under this License, provided you insert
     a copy of this License into the extracted document, and follow
     this License in all other respects regarding verbatim copying of
     that document.

  7. AGGREGATION WITH INDEPENDENT WORKS

     A compilation of the Document or its derivatives with other
     separate and independent documents or works, in or on a volume of
     a storage or distribution medium, is called an "aggregate" if the
     copyright resulting from the compilation is not used to limit the
     legal rights of the compilation's users beyond what the individual
     works permit.  When the Document is included in an aggregate, this
     License does not apply to the other works in the aggregate which
     are not themselves derivative works of the Document.

     If the Cover Text requirement of section 3 is applicable to these
     copies of the Document, then if the Document is less than one half
     of the entire aggregate, the Document's Cover Texts may be placed
     on covers that bracket the Document within the aggregate, or the
     electronic equivalent of covers if the Document is in electronic
     form.  Otherwise they must appear on printed covers that bracket
     the whole aggregate.

  8. TRANSLATION

     Translation is considered a kind of modification, so you may
     distribute translations of the Document under the terms of section
     4.  Replacing Invariant Sections with translations requires special
     permission from their copyright holders, but you may include
     translations of some or all Invariant Sections in addition to the
     original versions of these Invariant Sections.  You may include a
     translation of this License, and all the license notices in the
     Document, and any Warranty Disclaimers, provided that you also
     include the original English version of this License and the
     original versions of those notices and disclaimers.  In case of a
     disagreement between the translation and the original version of
     this License or a notice or disclaimer, the original version will
     prevail.

     If a section in the Document is Entitled "Acknowledgements",
     "Dedications", or "History", the requirement (section 4) to
     Preserve its Title (section 1) will typically require changing the
     actual title.

  9. TERMINATION

     You may not copy, modify, sublicense, or distribute the Document
     except as expressly provided under this License.  Any attempt
     otherwise to copy, modify, sublicense, or distribute it is void,
     and will automatically terminate your rights under this License.

     However, if you cease all violation of this License, then your
     license from a particular copyright holder is reinstated (a)
     provisionally, unless and until the copyright holder explicitly
     and finally terminates your license, and (b) permanently, if the
     copyright holder fails to notify you of the violation by some
     reasonable means prior to 60 days after the cessation.

     Moreover, your license from a particular copyright holder is
     reinstated permanently if the copyright holder notifies you of the
     violation by some reasonable means, this is the first time you have
     received notice of violation of this License (for any work) from
     that copyright holder, and you cure the violation prior to 30 days
     after your receipt of the notice.

     Termination of your rights under this section does not terminate
     the licenses of parties who have received copies or rights from
     you under this License.  If your rights have been terminated and
     not permanently reinstated, receipt of a copy of some or all of
     the same material does not give you any rights to use it.

 10. FUTURE REVISIONS OF THIS LICENSE

     The Free Software Foundation may publish new, revised versions of
     the GNU Free Documentation License from time to time.  Such new
     versions will be similar in spirit to the present version, but may
     differ in detail to address new problems or concerns.  See
     `http://www.gnu.org/copyleft/'.

     Each version of the License is given a distinguishing version
     number.  If the Document specifies that a particular numbered
     version of this License "or any later version" applies to it, you
     have the option of following the terms and conditions either of
     that specified version or of any later version that has been
     published (not as a draft) by the Free Software Foundation.  If
     the Document does not specify a version number of this License,
     you may choose any version ever published (not as a draft) by the
     Free Software Foundation.  If the Document specifies that a proxy
     can decide which future versions of this License can be used, that
     proxy's public statement of acceptance of a version permanently
     authorizes you to choose that version for the Document.

 11. RELICENSING

     "Massive Multiauthor Collaboration Site" (or "MMC Site") means any
     World Wide Web server that publishes copyrightable works and also
     provides prominent facilities for anybody to edit those works.  A
     public wiki that anybody can edit is an example of such a server.
     A "Massive Multiauthor Collaboration" (or "MMC") contained in the
     site means any set of copyrightable works thus published on the MMC
     site.

     "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
     license published by Creative Commons Corporation, a not-for-profit
     corporation with a principal place of business in San Francisco,
     California, as well as future copyleft versions of that license
     published by that same organization.

     "Incorporate" means to publish or republish a Document, in whole or
     in part, as part of another Document.

     An MMC is "eligible for relicensing" if it is licensed under this
     License, and if all works that were first published under this
     License somewhere other than this MMC, and subsequently
     incorporated in whole or in part into the MMC, (1) had no cover
     texts or invariant sections, and (2) were thus incorporated prior
     to November 1, 2008.

     The operator of an MMC Site may republish an MMC contained in the
     site under CC-BY-SA on the same site at any time before August 1,
     2009, provided the MMC is eligible for relicensing.


ADDENDUM: How to use this License for your documents
====================================================

To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:

       Copyright (C)  YEAR  YOUR NAME.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.3
       or any later version published by the Free Software Foundation;
       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
       Texts.  A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.

   If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the "with...Texts." line with this:

         with the Invariant Sections being LIST THEIR TITLES, with
         the Front-Cover Texts being LIST, and with the Back-Cover Texts
         being LIST.

   If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.

   If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of
free software license, such as the GNU General Public License, to
permit their use in free software.


File: gnat_rm.info,  Node: Index,  Prev: GNU Free Documentation License,  Up: Top

Index
*****

[index]
* Menu:

* -gnat12 option:                        Implementation of Ada 2012 Features.
                                                             (line    8)
* -gnatR switch:                         Determining the Representations chosen by GNAT.
                                                             (line    6)
* ___lock file (for shared passive packages): GNAT Implementation of Shared Passive Packages.
                                                             (line   69)
* Abort_Defer:                           Pragma Abort_Defer. (line    6)
* Abort_Signal:                          Abort_Signal.       (line    6)
* Access values, testing for:            Has_Access_Values.  (line    6)
* Access, unrestricted:                  Unrestricted_Access.
                                                             (line    6)
* Accuracy requirements:                 Implementation Advice.
                                                             (line 1203)
* Accuracy, complex arithmetic:          Implementation Advice.
                                                             (line 1216)
* Ada 2005 Language Reference Manual:    What This Reference Manual Contains.
                                                             (line   68)
* Ada 2012 implementation status:        Implementation of Ada 2012 Features.
                                                             (line    6)
* Ada 83 attributes <1>:                 Epsilon.            (line    6)
* Ada 83 attributes <2>:                 Large.              (line    6)
* Ada 83 attributes <3>:                 Small.              (line    6)
* Ada 83 attributes <4>:                 Safe_Emax.          (line    6)
* Ada 83 attributes <5>:                 Emax.               (line    6)
* Ada 83 attributes <6>:                 Mantissa.           (line    6)
* Ada 83 attributes:                     Safe_Large.         (line    6)
* Ada 95 Language Reference Manual:      What This Reference Manual Contains.
                                                             (line   68)
* Ada Extensions:                        Pragma Extensions_Allowed.
                                                             (line    6)
* Ada.Characters.Handling:               Implementation Advice.
                                                             (line  673)
* Ada.Characters.Latin_9 (a-chlat9.ads): Ada.Characters.Latin_9 (a-chlat9.ads).
                                                             (line    6)
* Ada.Characters.Wide_Latin_1 (a-cwila1.ads): Ada.Characters.Wide_Latin_1 (a-cwila1.ads).
                                                             (line    6)
* Ada.Characters.Wide_Latin_9 (a-cwila1.ads): Ada.Characters.Wide_Latin_9 (a-cwila9.ads).
                                                             (line    6)
* Ada.Characters.Wide_Wide_Latin_1 (a-chzla1.ads): Ada.Characters.Wide_Wide_Latin_1 (a-chzla1.ads).
                                                             (line    6)
* Ada.Characters.Wide_Wide_Latin_9 (a-chzla9.ads): Ada.Characters.Wide_Wide_Latin_9 (a-chzla9.ads).
                                                             (line    6)
* Ada.Command_Line.Environment (a-colien.ads): Ada.Command_Line.Environment (a-colien.ads).
                                                             (line    6)
* Ada.Command_Line.Remove (a-colire.ads): Ada.Command_Line.Remove (a-colire.ads).
                                                             (line    6)
* Ada.Command_Line.Response_File (a-clrefi.ads): Ada.Command_Line.Response_File (a-clrefi.ads).
                                                             (line    6)
* Ada.Containers.Formal_Doubly_Linked_Lists (a-cfdlli.ads): Ada.Containers.Formal_Doubly_Linked_Lists (a-cfdlli.ads).
                                                             (line    6)
* Ada.Containers.Formal_Hashed_Maps (a-cfhama.ads): Ada.Containers.Formal_Hashed_Maps (a-cfhama.ads).
                                                             (line    6)
* Ada.Containers.Formal_Hashed_Sets (a-cfhase.ads): Ada.Containers.Formal_Hashed_Sets (a-cfhase.ads).
                                                             (line    6)
* Ada.Containers.Formal_Ordered_Maps (a-cforma.ads): Ada.Containers.Formal_Ordered_Maps (a-cforma.ads).
                                                             (line    6)
* Ada.Containers.Formal_Ordered_Sets (a-cforse.ads): Ada.Containers.Formal_Ordered_Sets (a-cforse.ads).
                                                             (line    6)
* Ada.Containers.Formal_Vectors (a-cofove.ads): Ada.Containers.Formal_Vectors (a-cofove.ads).
                                                             (line    6)
* Ada.Direct_IO.C_Streams (a-diocst.ads): Ada.Direct_IO.C_Streams (a-diocst.ads).
                                                             (line    6)
* Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads): Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads).
                                                             (line    6)
* Ada.Exceptions.Last_Chance_Handler (a-elchha.ads): Ada.Exceptions.Last_Chance_Handler (a-elchha.ads).
                                                             (line    6)
* Ada.Exceptions.Traceback (a-exctra.ads): Ada.Exceptions.Traceback (a-exctra.ads).
                                                             (line    6)
* Ada.Sequential_IO.C_Streams (a-siocst.ads): Ada.Sequential_IO.C_Streams (a-siocst.ads).
                                                             (line    6)
* Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads): Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads).
                                                             (line    6)
* Ada.Strings.Unbounded.Text_IO (a-suteio.ads): Ada.Strings.Unbounded.Text_IO (a-suteio.ads).
                                                             (line    6)
* Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads): Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads).
                                                             (line    6)
* Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads): Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads).
                                                             (line    6)
* Ada.Text_IO.C_Streams (a-tiocst.ads):  Ada.Text_IO.C_Streams (a-tiocst.ads).
                                                             (line    6)
* Ada.Text_IO.Reset_Standard_Files (a-tirsfi.ads): Ada.Text_IO.Reset_Standard_Files (a-tirsfi.ads).
                                                             (line    6)
* Ada.Wide_Characters.Unicode (a-wichun.ads): Ada.Wide_Characters.Unicode (a-wichun.ads).
                                                             (line    6)
* Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads): Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads).
                                                             (line    6)
* Ada.Wide_Text_IO.Reset_Standard_Files (a-wrstfi.ads): Ada.Wide_Text_IO.Reset_Standard_Files (a-wrstfi.ads).
                                                             (line    6)
* Ada.Wide_Wide_Characters.Unicode (a-zchuni.ads): Ada.Wide_Wide_Characters.Unicode (a-zchuni.ads).
                                                             (line    6)
* Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads): Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads).
                                                             (line    6)
* Ada.Wide_Wide_Text_IO.Reset_Standard_Files (a-zrstfi.ads): Ada.Wide_Wide_Text_IO.Reset_Standard_Files (a-zrstfi.ads).
                                                             (line    6)
* Ada_05:                                Pragma Ada_05.      (line    6)
* Ada_12:                                Pragma Ada_12.      (line    6)
* Ada_2005 <1>:                          Pragma Ada_2005.    (line    6)
* Ada_2005:                              Pragma Ada_2012.    (line    6)
* Ada_2012 configuration pragma:         Implementation of Ada 2012 Features.
                                                             (line    9)
* Ada_83:                                Pragma Ada_83.      (line    6)
* Ada_95:                                Pragma Ada_95.      (line    6)
* Address Clause:                        Address Clauses.    (line    6)
* Address clauses:                       Implementation Advice.
                                                             (line  324)
* Address image:                         System.Address_Image (s-addima.ads).
                                                             (line    6)
* Address of subprogram code:            Code_Address.       (line    6)
* Address, as private type:              Implementation Advice.
                                                             (line  547)
* Address, operations of:                Implementation Advice.
                                                             (line  554)
* Address_Size:                          Address_Size.       (line    6)
* AI-0002 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1075)
* AI-0003 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  158)
* AI-0007 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  939)
* AI-0008 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  177)
* AI-0009 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  677)
* AI-0012 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  810)
* AI-0015 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  518)
* AI-0017 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  967)
* AI-0019 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  956)
* AI-0026 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  619)
* AI-0030 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  650)
* AI-0031 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1005)
* AI-0032 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  527)
* AI-0033 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  906)
* AI-0034 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  747)
* AI-0035 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  756)
* AI-0037 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  391)
* AI-0038 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1046)
* AI-0039 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  820)
* AI-0040 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  730)
* AI-0042 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  640)
* AI-0043 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  777)
* AI-0044 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1055)
* AI-0046 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  494)
* AI-0050 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  557)
* AI-0056 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1018)
* AI-0058 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  547)
* AI-0060 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  976)
* AI-0062 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  576)
* AI-0064 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  611)
* AI-0065 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  947)
* AI-0070 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  322)
* AI-0072 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  687)
* AI-0073 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  310)
* AI-0076 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  264)
* AI-0077 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  713)
* AI-0078 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  860)
* AI-0079 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line   40)
* AI-0080 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line   76)
* AI-0087 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  591)
* AI-0088 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  422)
* AI-0091 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line   48)
* AI-0093 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  188)
* AI-0095 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  828)
* AI-0096 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  195)
* AI-0097 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  283)
* AI-0098 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  348)
* AI-0099 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  600)
* AI-0100 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line   59)
* AI-0102 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  238)
* AI-0103 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  539)
* AI-0104 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  441)
* AI-0106 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  802)
* AI-0108 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  695)
* AI-0109 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  932)
* AI-0112 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  792)
* AI-0114 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  985)
* AI-0116 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  837)
* AI-0118 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  502)
* AI-0120 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  168)
* AI-0122 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  722)
* AI-0123 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  401)
* AI-0125 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  567)
* AI-0126 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  272)
* AI-0127 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1066)
* AI-0128 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  148)
* AI-0129 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  702)
* AI-0132 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  738)
* AI-0134 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  478)
* AI-0137 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1028)
* AI-0146 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  845)
* AI-0147 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  374)
* AI-0152 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1153)
* AI-0157 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  449)
* AI-0158 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  247)
* AI-0161 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  914)
* AI-0162 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  340)
* AI-0163 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line   68)
* AI-0171 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1128)
* AI-0173 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  257)
* AI-0176 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line   32)
* AI-0177 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  894)
* AI-0178 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  583)
* AI-0179 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  459)
* AI-0181 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  206)
* AI-0182 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  217)
* AI-0183 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line   83)
* AI-0185 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  996)
* AI-0188 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  433)
* AI-0189 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1116)
* AI-0190 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1105)
* AI-0193 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  885)
* AI-0194 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  923)
* AI-0195 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  871)
* AI-0196 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  510)
* AI-0198 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  300)
* AI-0199 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  357)
* AI-0200 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  784)
* AI-0201 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  663)
* AI-0203 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  293)
* AI-0205 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  633)
* AI-0206 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1146)
* AI-0207 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  486)
* AI-0208 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  330)
* AI-0210 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1138)
* AI-0211 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line 1097)
* AI-0214 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  228)
* AI-0219 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  768)
* AI-0220 (Ada 2012 feature):            Implementation of Ada 2012 Features.
                                                             (line  365)
* AI-139-2 (Ada 2012 feature):           Implementation of Ada 2012 Features.
                                                             (line  469)
* AI05-0216 (Ada 2012 feature):          Implementation of Ada 2012 Features.
                                                             (line 1086)
* Alignment Clause:                      Alignment Clauses.  (line    6)
* Alignment clauses:                     Implementation Advice.
                                                             (line  360)
* Alignment, allocator:                  System_Allocator_Alignment.
                                                             (line    6)
* Alignment, default:                    Alignment Clauses.  (line   72)
* Alignment, default settings:           Pragma Optimize_Alignment.
                                                             (line    6)
* Alignment, maximum:                    Maximum_Alignment.  (line    6)
* Alignments of components:              Pragma Component_Alignment.
                                                             (line    6)
* Alternative Character Sets:            Implementation Advice.
                                                             (line  116)
* AltiVec <1>:                           GNAT.Altivec (g-altive.ads).
                                                             (line    6)
* AltiVec <2>:                           GNAT.Altivec.Vector_Views (g-alvevi.ads).
                                                             (line    6)
* AltiVec <3>:                           GNAT.Altivec.Vector_Types (g-alvety.ads).
                                                             (line    6)
* AltiVec <4>:                           GNAT.Altivec.Vector_Operations (g-alveop.ads).
                                                             (line    6)
* AltiVec:                               GNAT.Altivec.Conversions (g-altcon.ads).
                                                             (line    6)
* Annex E:                               GNAT Implementation of Shared Passive Packages.
                                                             (line   10)
* Annotate:                              Pragma Annotate.    (line    6)
* Argument passing mechanisms:           Pragma Export_Function.
                                                             (line    6)
* Array packing:                         Pragma Implicit_Packing.
                                                             (line   31)
* Array splitter:                        GNAT.Array_Split (g-arrspl.ads).
                                                             (line    6)
* Arrays, extendable <1>:                GNAT.Table (g-table.ads).
                                                             (line    6)
* Arrays, extendable:                    GNAT.Dynamic_Tables (g-dyntab.ads).
                                                             (line    6)
* Arrays, multidimensional:              Implementation Advice.
                                                             (line  191)
* Asm_Input:                             Asm_Input.          (line    6)
* Asm_Output:                            Asm_Output.         (line    6)
* Assert:                                Pragma Assert.      (line    6)
* Assert_Failure, exception:             System.Assertions (s-assert.ads).
                                                             (line    6)
* Assertions <1>:                        Pragma Check.       (line    6)
* Assertions:                            System.Assertions (s-assert.ads).
                                                             (line    6)
* Assertions, control:                   Pragma Check_Policy.
                                                             (line    6)
* Assume_No_Invalid_Values:              Pragma Assume_No_Invalid_Values.
                                                             (line    6)
* Ast_Entry:                             Pragma Ast_Entry.   (line    6)
* AST_Entry:                             AST_Entry.          (line    6)
* Attribute:                             Address Clauses.    (line   80)
* AWK:                                   GNAT.AWK (g-awk.ads).
                                                             (line    6)
* Biased representation:                 Biased Representation.
                                                             (line    6)
* Big endian:                            Default_Bit_Order.  (line    6)
* Bit:                                   Bit.                (line    6)
* Bit ordering:                          Implementation Advice.
                                                             (line  534)
* bit ordering:                          Bit_Order Clauses.  (line    6)
* Bit_Order Clause:                      Bit_Order Clauses.  (line    6)
* Bit_Position:                          Bit_Position.       (line    6)
* Bounded Buffers:                       GNAT.Bounded_Buffers (g-boubuf.ads).
                                                             (line    6)
* Bounded errors:                        Implementation Advice.
                                                             (line   46)
* Bounded-length strings:                Implementation Advice.
                                                             (line  682)
* Bubble sort <1>:                       GNAT.Bubble_Sort_A (g-busora.ads).
                                                             (line    6)
* Bubble sort <2>:                       GNAT.Bubble_Sort_G (g-busorg.ads).
                                                             (line    6)
* Bubble sort:                           GNAT.Bubble_Sort (g-bubsor.ads).
                                                             (line    6)
* byte ordering:                         Effect of Bit_Order on Byte Ordering.
                                                             (line    6)
* Byte swapping:                         GNAT.Byte_Swapping (g-bytswa.ads).
                                                             (line    6)
* C streams, interfacing:                Interfaces.C.Streams (i-cstrea.ads).
                                                             (line    6)
* C Streams, Interfacing with Direct_IO: Ada.Direct_IO.C_Streams (a-diocst.ads).
                                                             (line    6)
* C Streams, Interfacing with Sequential_IO: Ada.Sequential_IO.C_Streams (a-siocst.ads).
                                                             (line    6)
* C Streams, Interfacing with Stream_IO: Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads).
                                                             (line    6)
* C Streams, Interfacing with Text_IO:   Ada.Text_IO.C_Streams (a-tiocst.ads).
                                                             (line    6)
* C Streams, Interfacing with Wide_Text_IO: Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads).
                                                             (line    6)
* C Streams, Interfacing with Wide_Wide_Text_IO: Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads).
                                                             (line    6)
* C++ interfacing:                       Interfaces.CPP (i-cpp.ads).
                                                             (line    6)
* C, interfacing with:                   Implementation Advice.
                                                             (line  778)
* C_Pass_By_Copy:                        Pragma C_Pass_By_Copy.
                                                             (line    6)
* Calendar <1>:                          GNAT.Calendar (g-calend.ads).
                                                             (line    6)
* Calendar:                              GNAT.Calendar.Time_IO (g-catiio.ads).
                                                             (line    6)
* Capturing Old values:                  Old.                (line    6)
* Casing of External names:              Pragma External_Name_Casing.
                                                             (line    6)
* Casing utilities:                      GNAT.Case_Util (g-casuti.ads).
                                                             (line    6)
* CGI (Common Gateway Interface):        GNAT.CGI (g-cgi.ads).
                                                             (line    6)
* CGI (Common Gateway Interface) cookie support: GNAT.CGI.Cookie (g-cgicoo.ads).
                                                             (line    6)
* CGI (Common Gateway Interface) debugging: GNAT.CGI.Debug (g-cgideb.ads).
                                                             (line    6)
* Character handling (GNAT.Case_Util):   GNAT.Case_Util (g-casuti.ads).
                                                             (line    6)
* Character Sets:                        Implementation Advice.
                                                             (line  116)
* Check <1>:                             Pragma Check_Policy.
                                                             (line    6)
* Check:                                 Pragma Check.       (line    6)
* Check names, defining:                 Pragma Check_Name.  (line    6)
* Check pragma control:                  Pragma Check_Policy.
                                                             (line    6)
* Check_Name:                            Pragma Check_Name.  (line    6)
* Checks, postconditions:                Pragma Postcondition.
                                                             (line    6)
* Checks, preconditions:                 Pragma Precondition.
                                                             (line    6)
* Checks, suppression of:                Implementation Advice.
                                                             (line  252)
* Child Units:                           Implementation Advice.
                                                             (line   37)
* COBOL support:                         Implementation Advice.
                                                             (line 1102)
* COBOL, interfacing with:               Implementation Advice.
                                                             (line  833)
* Code_Address:                          Code_Address.       (line    6)
* Command line:                          GNAT.Command_Line (g-comlin.ads).
                                                             (line    6)
* Command line, argument removal:        Ada.Command_Line.Remove (a-colire.ads).
                                                             (line    6)
* Command line, handling long command lines: Ada.Command_Line.Response_File (a-clrefi.ads).
                                                             (line    6)
* Command line, response file:           Ada.Command_Line.Response_File (a-clrefi.ads).
                                                             (line    6)
* Comment:                               Pragma Comment.     (line    6)
* Common_Object:                         Pragma Common_Object.
                                                             (line    6)
* Compile_Time_Error:                    Pragma Compile_Time_Error.
                                                             (line    6)
* Compile_Time_Warning:                  Pragma Compile_Time_Warning.
                                                             (line    6)
* Compiler Version:                      GNAT.Compiler_Version (g-comver.ads).
                                                             (line    6)
* Compiler_Unit:                         Pragma Compiler_Unit.
                                                             (line    6)
* Compiler_Version:                      Compiler_Version.   (line    6)
* Complete_Representation:               Pragma Complete_Representation.
                                                             (line    6)
* Complex arithmetic accuracy:           Implementation Advice.
                                                             (line 1216)
* Complex elementary functions:          Implementation Advice.
                                                             (line 1188)
* Complex types:                         Implementation Advice.
                                                             (line 1138)
* Complex_Representation:                Pragma Complex_Representation.
                                                             (line    6)
* Component Clause:                      Record Representation Clauses.
                                                             (line   11)
* Component_Alignment:                   Pragma Component_Alignment.
                                                             (line    6)
* Component_Size:                        Pragma Component_Alignment.
                                                             (line   21)
* Component_Size Clause:                 Component_Size Clauses.
                                                             (line    6)
* Component_Size clauses:                Implementation Advice.
                                                             (line  447)
* Component_Size_4:                      Pragma Component_Alignment.
                                                             (line   30)
* configuration pragma Ada_2012:         Implementation of Ada 2012 Features.
                                                             (line    9)
* Controlling assertions:                Pragma Check_Policy.
                                                             (line    6)
* Convention, effect on representation:  Effect of Convention on Representation.
                                                             (line    6)
* Convention_Identifier:                 Pragma Convention_Identifier.
                                                             (line    6)
* Conventions, synonyms:                 Pragma Convention_Identifier.
                                                             (line    6)
* Conventions, typographical:            Conventions.        (line    6)
* Cookie support in CGI:                 GNAT.CGI.Cookie (g-cgicoo.ads).
                                                             (line    6)
* CPP_Class:                             Pragma CPP_Class.   (line    6)
* CPP_Constructor:                       Pragma CPP_Constructor.
                                                             (line    6)
* CPP_Virtual:                           Pragma CPP_Virtual. (line    6)
* CPP_Vtable:                            Pragma CPP_Vtable.  (line    6)
* CRC32:                                 GNAT.CRC32 (g-crc32.ads).
                                                             (line    6)
* Current exception:                     GNAT.Current_Exception (g-curexc.ads).
                                                             (line    6)
* Current time:                          GNAT.Time_Stamp (g-timsta.ads).
                                                             (line    6)
* Cyclic Redundancy Check:               GNAT.CRC32 (g-crc32.ads).
                                                             (line    6)
* Debug:                                 Pragma Debug.       (line    6)
* Debug pools:                           GNAT.Debug_Pools (g-debpoo.ads).
                                                             (line    6)
* Debug_Policy <1>:                      Pragma Assertion_Policy.
                                                             (line    6)
* Debug_Policy:                          Pragma Debug_Policy.
                                                             (line    6)
* Debugging <1>:                         GNAT.Exception_Traces (g-exctra.ads).
                                                             (line    6)
* Debugging <2>:                         GNAT.Debug_Utilities (g-debuti.ads).
                                                             (line    6)
* Debugging:                             GNAT.Debug_Pools (g-debpoo.ads).
                                                             (line    6)
* debugging with Initialize_Scalars:     Pragma Initialize_Scalars.
                                                             (line    6)
* Dec Ada 83:                            Pragma Extend_System.
                                                             (line    6)
* Dec Ada 83 casing compatibility:       Pragma External_Name_Casing.
                                                             (line    6)
* Decimal radix support:                 Implementation Advice.
                                                             (line 1115)
* Decoding strings <1>:                  GNAT.Decode_String (g-decstr.ads).
                                                             (line    6)
* Decoding strings:                      GNAT.Decode_UTF8_String (g-deutst.ads).
                                                             (line    6)
* Decoding UTF-8 strings:                GNAT.Decode_UTF8_String (g-deutst.ads).
                                                             (line    6)
* Default_Bit_Order:                     Default_Bit_Order.  (line    6)
* Deferring aborts:                      Pragma Abort_Defer. (line    6)
* Defining check names:                  Pragma Check_Name.  (line    6)
* Descriptor:                            Descriptor_Size.    (line    6)
* Descriptor_Size:                       Descriptor_Size.    (line    6)
* Detect_Blocking:                       Pragma Detect_Blocking.
                                                             (line    6)
* Directory operations:                  GNAT.Directory_Operations (g-dirope.ads).
                                                             (line    6)
* Directory operations iteration:        GNAT.Directory_Operations.Iteration (g-diopit.ads).
                                                             (line    6)
* Discriminants, testing for:            Has_Discriminants.  (line    6)
* Distribution Systems Annex:            GNAT Implementation of Shared Passive Packages.
                                                             (line   10)
* Dope vector:                           Descriptor_Size.    (line    6)
* Dump Memory:                           GNAT.Memory_Dump (g-memdum.ads).
                                                             (line    6)
* Duration'Small:                        Implementation Advice.
                                                             (line  203)
* Elab_Body:                             Elab_Body.          (line    6)
* Elab_Spec:                             Elab_Spec.          (line    6)
* Elab_Subp_Body:                        Elab_Subp_Body.     (line    6)
* Elaborated:                            Elaborated.         (line    6)
* Elaboration control:                   Pragma Elaboration_Checks.
                                                             (line    6)
* Elaboration_Checks:                    Pragma Elaboration_Checks.
                                                             (line    6)
* Eliminate:                             Pragma Eliminate.   (line    6)
* Elimination of unused subprograms:     Pragma Eliminate.   (line    6)
* Emax:                                  Emax.               (line    6)
* Enabled:                               Enabled.            (line    6)
* Enclosing_Entity:                      Enclosing_Entity.   (line    6)
* Encoding strings <1>:                  GNAT.Encode_UTF8_String (g-enutst.ads).
                                                             (line    6)
* Encoding strings:                      GNAT.Encode_String (g-encstr.ads).
                                                             (line    6)
* Encoding UTF-8 strings:                GNAT.Encode_UTF8_String (g-enutst.ads).
                                                             (line    6)
* Endian:                                GNAT.Byte_Swapping (g-bytswa.ads).
                                                             (line    6)
* Entry queuing policies:                Implementation Advice.
                                                             (line 1030)
* Enum_Rep:                              Enum_Rep.           (line    6)
* Enum_Val:                              Enum_Val.           (line    6)
* Enumeration representation clauses:    Implementation Advice.
                                                             (line  468)
* Enumeration values:                    Implementation Advice.
                                                             (line  159)
* Environment entries:                   Ada.Command_Line.Environment (a-colien.ads).
                                                             (line    6)
* Epsilon:                               Epsilon.            (line    6)
* Error detection:                       Implementation Advice.
                                                             (line   28)
* Exception actions:                     GNAT.Exception_Actions (g-excact.ads).
                                                             (line    6)
* Exception information:                 Implementation Advice.
                                                             (line  232)
* Exception retrieval:                   GNAT.Current_Exception (g-curexc.ads).
                                                             (line    6)
* Exception traces:                      GNAT.Exception_Traces (g-exctra.ads).
                                                             (line    6)
* Exception, obtaining most recent:      GNAT.Most_Recent_Exception (g-moreex.ads).
                                                             (line    6)
* Exception_Information':                Exception_Information.
                                                             (line    6)
* Exception_Message:                     Exception_Message.  (line    6)
* Exception_Name:                        Exception_Name.     (line    6)
* Exceptions, Pure:                      GNAT.Exceptions (g-except.ads).
                                                             (line    6)
* Export <1>:                            Address Clauses.    (line  112)
* Export:                                Implementation Advice.
                                                             (line  726)
* Export_Exception:                      Pragma Export_Exception.
                                                             (line    6)
* Export_Function:                       Pragma Export_Function.
                                                             (line    6)
* Export_Object:                         Pragma Export_Object.
                                                             (line    6)
* Export_Procedure:                      Pragma Export_Procedure.
                                                             (line    6)
* Export_Value:                          Pragma Export_Value.
                                                             (line    6)
* Export_Valued_Procedure:               Pragma Export_Valued_Procedure.
                                                             (line    6)
* Extend_System:                         Pragma Extend_System.
                                                             (line    6)
* Extensions_Allowed:                    Pragma Extensions_Allowed.
                                                             (line    6)
* External:                              Pragma External.    (line    6)
* External Names, casing:                Pragma External_Name_Casing.
                                                             (line    6)
* External_Name_Casing:                  Pragma External_Name_Casing.
                                                             (line    6)
* Fast_Math:                             Pragma Fast_Math.   (line    6)
* Favor_Top_Level:                       Pragma Favor_Top_Level.
                                                             (line    6)
* FDL, GNU Free Documentation License:   GNU Free Documentation License.
                                                             (line    6)
* File:                                  File.               (line    6)
* File locking:                          GNAT.Lock_Files (g-locfil.ads).
                                                             (line    6)
* Finalize_Storage_Only:                 Pragma Finalize_Storage_Only.
                                                             (line    6)
* Fixed_Value:                           Fixed_Value.        (line    6)
* Float types:                           Implementation Advice.
                                                             (line  171)
* Float_Representation:                  Pragma Float_Representation.
                                                             (line    6)
* Floating-Point Processor:              GNAT.Float_Control (g-flocon.ads).
                                                             (line    6)
* Foreign threads:                       GNAT.Threads (g-thread.ads).
                                                             (line    6)
* Forking a new process:                 Mapping Ada Tasks onto the Underlying Kernel Threads.
                                                             (line   53)
* Formal container for doubly linked lists: Ada.Containers.Formal_Doubly_Linked_Lists (a-cfdlli.ads).
                                                             (line    6)
* Formal container for hashed maps:      Ada.Containers.Formal_Hashed_Maps (a-cfhama.ads).
                                                             (line    6)
* Formal container for hashed sets:      Ada.Containers.Formal_Hashed_Sets (a-cfhase.ads).
                                                             (line    6)
* Formal container for ordered maps:     Ada.Containers.Formal_Ordered_Maps (a-cforma.ads).
                                                             (line    6)
* Formal container for ordered sets:     Ada.Containers.Formal_Ordered_Sets (a-cforse.ads).
                                                             (line    6)
* Formal container for vectors:          Ada.Containers.Formal_Vectors (a-cofove.ads).
                                                             (line    6)
* Fortran, interfacing with:             Implementation Advice.
                                                             (line  857)
* Get_Immediate <1>:                     Get_Immediate.      (line    6)
* Get_Immediate:                         Implementation Advice.
                                                             (line  709)
* Get_Immediate, VxWorks:                Interfaces.VxWorks.IO (i-vxwoio.ads).
                                                             (line    6)
* Global storage pool:                   System.Pool_Global (s-pooglo.ads).
                                                             (line    6)
* GNAT Extensions:                       Pragma Extensions_Allowed.
                                                             (line    6)
* GNAT.Altivec (g-altive.ads):           GNAT.Altivec (g-altive.ads).
                                                             (line    6)
* GNAT.Altivec.Conversions (g-altcon.ads): GNAT.Altivec.Conversions (g-altcon.ads).
                                                             (line    6)
* GNAT.Altivec.Vector_Operations (g-alveop.ads): GNAT.Altivec.Vector_Operations (g-alveop.ads).
                                                             (line    6)
* GNAT.Altivec.Vector_Types (g-alvety.ads): GNAT.Altivec.Vector_Types (g-alvety.ads).
                                                             (line    6)
* GNAT.Altivec.Vector_Views (g-alvevi.ads): GNAT.Altivec.Vector_Views (g-alvevi.ads).
                                                             (line    6)
* GNAT.Array_Split (g-arrspl.ads):       GNAT.Array_Split (g-arrspl.ads).
                                                             (line    6)
* GNAT.AWK (g-awk.ads):                  GNAT.AWK (g-awk.ads).
                                                             (line    6)
* GNAT.Bounded_Buffers (g-boubuf.ads):   GNAT.Bounded_Buffers (g-boubuf.ads).
                                                             (line    6)
* GNAT.Bounded_Mailboxes (g-boumai.ads): GNAT.Bounded_Mailboxes (g-boumai.ads).
                                                             (line    6)
* GNAT.Bubble_Sort (g-bubsor.ads):       GNAT.Bubble_Sort (g-bubsor.ads).
                                                             (line    6)
* GNAT.Bubble_Sort_A (g-busora.ads):     GNAT.Bubble_Sort_A (g-busora.ads).
                                                             (line    6)
* GNAT.Bubble_Sort_G (g-busorg.ads):     GNAT.Bubble_Sort_G (g-busorg.ads).
                                                             (line    6)
* GNAT.Byte_Order_Mark (g-byorma.ads):   GNAT.Byte_Order_Mark (g-byorma.ads).
                                                             (line    6)
* GNAT.Byte_Swapping (g-bytswa.ads):     GNAT.Byte_Swapping (g-bytswa.ads).
                                                             (line    6)
* GNAT.Calendar (g-calend.ads):          GNAT.Calendar (g-calend.ads).
                                                             (line    6)
* GNAT.Calendar.Time_IO (g-catiio.ads):  GNAT.Calendar.Time_IO (g-catiio.ads).
                                                             (line    6)
* GNAT.Case_Util (g-casuti.ads):         GNAT.Case_Util (g-casuti.ads).
                                                             (line    6)
* GNAT.CGI (g-cgi.ads):                  GNAT.CGI (g-cgi.ads).
                                                             (line    6)
* GNAT.CGI.Cookie (g-cgicoo.ads):        GNAT.CGI.Cookie (g-cgicoo.ads).
                                                             (line    6)
* GNAT.CGI.Debug (g-cgideb.ads):         GNAT.CGI.Debug (g-cgideb.ads).
                                                             (line    6)
* GNAT.Command_Line (g-comlin.ads):      GNAT.Command_Line (g-comlin.ads).
                                                             (line    6)
* GNAT.Compiler_Version (g-comver.ads):  GNAT.Compiler_Version (g-comver.ads).
                                                             (line    6)
* GNAT.CRC32 (g-crc32.ads):              GNAT.CRC32 (g-crc32.ads).
                                                             (line    6)
* GNAT.Ctrl_C (g-ctrl_c.ads):            GNAT.Ctrl_C (g-ctrl_c.ads).
                                                             (line    6)
* GNAT.Current_Exception (g-curexc.ads): GNAT.Current_Exception (g-curexc.ads).
                                                             (line    6)
* GNAT.Debug_Pools (g-debpoo.ads):       GNAT.Debug_Pools (g-debpoo.ads).
                                                             (line    6)
* GNAT.Debug_Utilities (g-debuti.ads):   GNAT.Debug_Utilities (g-debuti.ads).
                                                             (line    6)
* GNAT.Decode_String (g-decstr.ads):     GNAT.Decode_String (g-decstr.ads).
                                                             (line    6)
* GNAT.Decode_UTF8_String (g-deutst.ads): GNAT.Decode_UTF8_String (g-deutst.ads).
                                                             (line    6)
* GNAT.Directory_Operations (g-dirope.ads): GNAT.Directory_Operations (g-dirope.ads).
                                                             (line    6)
* GNAT.Directory_Operations.Iteration (g-diopit.ads): GNAT.Directory_Operations.Iteration (g-diopit.ads).
                                                             (line    6)
* GNAT.Dynamic_HTables (g-dynhta.ads):   GNAT.Dynamic_HTables (g-dynhta.ads).
                                                             (line    6)
* GNAT.Dynamic_Tables (g-dyntab.ads):    GNAT.Dynamic_Tables (g-dyntab.ads).
                                                             (line    6)
* GNAT.Encode_String (g-encstr.ads):     GNAT.Encode_String (g-encstr.ads).
                                                             (line    6)
* GNAT.Encode_UTF8_String (g-enutst.ads): GNAT.Encode_UTF8_String (g-enutst.ads).
                                                             (line    6)
* GNAT.Exception_Actions (g-excact.ads): GNAT.Exception_Actions (g-excact.ads).
                                                             (line    6)
* GNAT.Exception_Traces (g-exctra.ads):  GNAT.Exception_Traces (g-exctra.ads).
                                                             (line    6)
* GNAT.Exceptions (g-expect.ads):        GNAT.Exceptions (g-except.ads).
                                                             (line    6)
* GNAT.Expect (g-expect.ads):            GNAT.Expect (g-expect.ads).
                                                             (line    6)
* GNAT.Expect.TTY (g-exptty.ads):        GNAT.Expect.TTY (g-exptty.ads).
                                                             (line    6)
* GNAT.Float_Control (g-flocon.ads):     GNAT.Float_Control (g-flocon.ads).
                                                             (line    6)
* GNAT.Heap_Sort (g-heasor.ads):         GNAT.Heap_Sort (g-heasor.ads).
                                                             (line    6)
* GNAT.Heap_Sort_A (g-hesora.ads):       GNAT.Heap_Sort_A (g-hesora.ads).
                                                             (line    6)
* GNAT.Heap_Sort_G (g-hesorg.ads):       GNAT.Heap_Sort_G (g-hesorg.ads).
                                                             (line    6)
* GNAT.HTable (g-htable.ads):            GNAT.HTable (g-htable.ads).
                                                             (line    6)
* GNAT.IO (g-io.ads):                    GNAT.IO (g-io.ads). (line    6)
* GNAT.IO_Aux (g-io_aux.ads):            GNAT.IO_Aux (g-io_aux.ads).
                                                             (line    6)
* GNAT.Lock_Files (g-locfil.ads):        GNAT.Lock_Files (g-locfil.ads).
                                                             (line    6)
* GNAT.MBBS_Discrete_Random (g-mbdira.ads): GNAT.MBBS_Discrete_Random (g-mbdira.ads).
                                                             (line    6)
* GNAT.MBBS_Float_Random (g-mbflra.ads): GNAT.MBBS_Float_Random (g-mbflra.ads).
                                                             (line    6)
* GNAT.MD5 (g-md5.ads):                  GNAT.MD5 (g-md5.ads).
                                                             (line    6)
* GNAT.Memory_Dump (g-memdum.ads):       GNAT.Memory_Dump (g-memdum.ads).
                                                             (line    6)
* GNAT.Most_Recent_Exception (g-moreex.ads): GNAT.Most_Recent_Exception (g-moreex.ads).
                                                             (line    6)
* GNAT.OS_Lib (g-os_lib.ads):            GNAT.OS_Lib (g-os_lib.ads).
                                                             (line    6)
* GNAT.Perfect_Hash_Generators (g-pehage.ads): GNAT.Perfect_Hash_Generators (g-pehage.ads).
                                                             (line    6)
* GNAT.Random_Numbers (g-rannum.ads):    GNAT.Random_Numbers (g-rannum.ads).
                                                             (line    6)
* GNAT.Regexp (g-regexp.ads):            GNAT.Regexp (g-regexp.ads).
                                                             (line    6)
* GNAT.Registry (g-regist.ads):          GNAT.Registry (g-regist.ads).
                                                             (line    6)
* GNAT.Regpat (g-regpat.ads):            GNAT.Regpat (g-regpat.ads).
                                                             (line    6)
* GNAT.Secondary_Stack_Info (g-sestin.ads): GNAT.Secondary_Stack_Info (g-sestin.ads).
                                                             (line    6)
* GNAT.Semaphores (g-semaph.ads):        GNAT.Semaphores (g-semaph.ads).
                                                             (line    6)
* GNAT.Serial_Communications (g-sercom.ads): GNAT.Serial_Communications (g-sercom.ads).
                                                             (line    6)
* GNAT.SHA1 (g-sha1.ads):                GNAT.SHA1 (g-sha1.ads).
                                                             (line    6)
* GNAT.SHA224 (g-sha224.ads):            GNAT.SHA224 (g-sha224.ads).
                                                             (line    6)
* GNAT.SHA256 (g-sha256.ads):            GNAT.SHA256 (g-sha256.ads).
                                                             (line    6)
* GNAT.SHA384 (g-sha384.ads):            GNAT.SHA384 (g-sha384.ads).
                                                             (line    6)
* GNAT.SHA512 (g-sha512.ads):            GNAT.SHA512 (g-sha512.ads).
                                                             (line    6)
* GNAT.Signals (g-signal.ads):           GNAT.Signals (g-signal.ads).
                                                             (line    6)
* GNAT.Sockets (g-socket.ads):           GNAT.Sockets (g-socket.ads).
                                                             (line    6)
* GNAT.Source_Info (g-souinf.ads):       GNAT.Source_Info (g-souinf.ads).
                                                             (line    6)
* GNAT.Spelling_Checker (g-speche.ads):  GNAT.Spelling_Checker (g-speche.ads).
                                                             (line    6)
* GNAT.Spelling_Checker_Generic (g-spchge.ads): GNAT.Spelling_Checker_Generic (g-spchge.ads).
                                                             (line    6)
* GNAT.Spitbol (g-spitbo.ads):           GNAT.Spitbol (g-spitbo.ads).
                                                             (line    6)
* GNAT.Spitbol.Patterns (g-spipat.ads):  GNAT.Spitbol.Patterns (g-spipat.ads).
                                                             (line    6)
* GNAT.Spitbol.Table_Boolean (g-sptabo.ads): GNAT.Spitbol.Table_Boolean (g-sptabo.ads).
                                                             (line    6)
* GNAT.Spitbol.Table_Integer (g-sptain.ads): GNAT.Spitbol.Table_Integer (g-sptain.ads).
                                                             (line    6)
* GNAT.Spitbol.Table_VString (g-sptavs.ads): GNAT.Spitbol.Table_VString (g-sptavs.ads).
                                                             (line    6)
* GNAT.SSE (g-sse.ads):                  GNAT.SSE (g-sse.ads).
                                                             (line    6)
* GNAT.SSE.Vector_Types (g-ssvety.ads):  GNAT.SSE.Vector_Types (g-ssvety.ads).
                                                             (line    6)
* GNAT.String_Split (g-strspl.ads):      GNAT.String_Split (g-strspl.ads).
                                                             (line    6)
* GNAT.Strings (g-string.ads):           GNAT.Strings (g-string.ads).
                                                             (line    6)
* GNAT.Table (g-table.ads):              GNAT.Table (g-table.ads).
                                                             (line    6)
* GNAT.Task_Lock (g-tasloc.ads):         GNAT.Task_Lock (g-tasloc.ads).
                                                             (line    6)
* GNAT.Threads (g-thread.ads):           GNAT.Threads (g-thread.ads).
                                                             (line    6)
* GNAT.Time_Stamp (g-timsta.ads):        GNAT.Time_Stamp (g-timsta.ads).
                                                             (line    6)
* GNAT.Traceback (g-traceb.ads):         GNAT.Traceback (g-traceb.ads).
                                                             (line    6)
* GNAT.Traceback.Symbolic (g-trasym.ads): GNAT.Traceback.Symbolic (g-trasym.ads).
                                                             (line    6)
* GNAT.UTF_32 (g-table.ads):             GNAT.UTF_32 (g-utf_32.ads).
                                                             (line    6)
* GNAT.Wide_Spelling_Checker (g-u3spch.ads): GNAT.UTF_32_Spelling_Checker (g-u3spch.ads).
                                                             (line    6)
* GNAT.Wide_Spelling_Checker (g-wispch.ads): GNAT.Wide_Spelling_Checker (g-wispch.ads).
                                                             (line    6)
* GNAT.Wide_String_Split (g-wistsp.ads): GNAT.Wide_String_Split (g-wistsp.ads).
                                                             (line    6)
* GNAT.Wide_Wide_Spelling_Checker (g-zspche.ads): GNAT.Wide_Wide_Spelling_Checker (g-zspche.ads).
                                                             (line    6)
* GNAT.Wide_Wide_String_Split (g-zistsp.ads): GNAT.Wide_Wide_String_Split (g-zistsp.ads).
                                                             (line    6)
* Has_Access_Values:                     Has_Access_Values.  (line    6)
* Has_Discriminants:                     Has_Discriminants.  (line    6)
* Hash functions:                        GNAT.Perfect_Hash_Generators (g-pehage.ads).
                                                             (line    6)
* Hash tables <1>:                       GNAT.Dynamic_HTables (g-dynhta.ads).
                                                             (line    6)
* Hash tables:                           GNAT.HTable (g-htable.ads).
                                                             (line    6)
* Heap usage, implicit:                  Implementation Advice.
                                                             (line  596)
* IBM Packed Format:                     Interfaces.Packed_Decimal (i-pacdec.ads).
                                                             (line    6)
* Ident:                                 Pragma Ident.       (line    6)
* Image, of an address:                  System.Address_Image (s-addima.ads).
                                                             (line    6)
* Img:                                   Img.                (line    6)
* Immediate_Reclamation:                 Immediate_Reclamation.
                                                             (line    6)
* Implementation-dependent features:     About This Guide.   (line   24)
* Implemented:                           Pragma Implemented. (line    6)
* Implicit_Packing:                      Pragma Implicit_Packing.
                                                             (line    6)
* Import:                                Address Clauses.    (line  117)
* Import_Exception:                      Pragma Import_Exception.
                                                             (line    6)
* Import_Function:                       Pragma Import_Function.
                                                             (line    6)
* Import_Object:                         Pragma Import_Object.
                                                             (line    6)
* Import_Procedure:                      Pragma Import_Procedure.
                                                             (line    6)
* Import_Valued_Procedure:               Pragma Import_Valued_Procedure.
                                                             (line    6)
* Initialization, suppression of:        Pragma Suppress_Initialization.
                                                             (line    6)
* Initialize_Scalars:                    Pragma Initialize_Scalars.
                                                             (line    6)
* Inline_Always:                         Pragma Inline_Always.
                                                             (line    6)
* Inline_Generic:                        Pragma Inline_Generic.
                                                             (line    6)
* Input/Output facilities <1>:           GNAT.IO_Aux (g-io_aux.ads).
                                                             (line    6)
* Input/Output facilities:               GNAT.IO (g-io.ads). (line    6)
* Integer maps:                          GNAT.Spitbol.Table_Integer (g-sptain.ads).
                                                             (line    6)
* Integer types:                         Implementation Advice.
                                                             (line  136)
* Integer_Value:                         Integer_Value.      (line    6)
* Interface:                             Pragma Interface.   (line    6)
* Interface_Name:                        Pragma Interface_Name.
                                                             (line    6)
* Interfaces:                            Implementation Advice.
                                                             (line  758)
* Interfaces.C.Extensions (i-cexten.ads): Interfaces.C.Extensions (i-cexten.ads).
                                                             (line    6)
* Interfaces.C.Streams (i-cstrea.ads):   Interfaces.C.Streams (i-cstrea.ads).
                                                             (line    6)
* Interfaces.CPP (i-cpp.ads):            Interfaces.CPP (i-cpp.ads).
                                                             (line    6)
* Interfaces.Packed_Decimal (i-pacdec.ads): Interfaces.Packed_Decimal (i-pacdec.ads).
                                                             (line    6)
* Interfaces.VxWorks (i-vxwork.ads):     Interfaces.VxWorks (i-vxwork.ads).
                                                             (line    6)
* Interfaces.VxWorks.IO (i-vxwoio.ads):  Interfaces.VxWorks.IO (i-vxwoio.ads).
                                                             (line    6)
* Interfacing to C++:                    Pragma CPP_Virtual. (line    6)
* Interfacing to VxWorks:                Interfaces.VxWorks (i-vxwork.ads).
                                                             (line    6)
* Interfacing to VxWorks' I/O:           Interfaces.VxWorks.IO (i-vxwoio.ads).
                                                             (line    6)
* Interfacing with C++ <1>:              Pragma CPP_Vtable.  (line    6)
* Interfacing with C++ <2>:              Pragma CPP_Constructor.
                                                             (line    6)
* Interfacing with C++:                  Pragma CPP_Class.   (line    6)
* Interfacing, to C++:                   Interfaces.CPP (i-cpp.ads).
                                                             (line    6)
* Interrupt:                             GNAT.Ctrl_C (g-ctrl_c.ads).
                                                             (line    6)
* Interrupt priority, maximum:           Max_Interrupt_Priority.
                                                             (line    6)
* Interrupt support:                     Implementation Advice.
                                                             (line  950)
* Interrupt_Handler:                     Pragma Interrupt_Handler.
                                                             (line    6)
* Interrupt_State:                       Pragma Interrupt_State.
                                                             (line    6)
* Interrupts:                            Implementation Advice.
                                                             (line  975)
* Intrinsic operator:                    Intrinsic Operators.
                                                             (line    6)
* Intrinsic Subprograms:                 Intrinsic Subprograms.
                                                             (line    6)
* Invalid representations:               Pragma Assume_No_Invalid_Values.
                                                             (line    6)
* Invalid values:                        Pragma Assume_No_Invalid_Values.
                                                             (line    6)
* Invalid_Value:                         Invalid_Value.      (line    6)
* Invariant:                             Pragma Invariant.   (line    6)
* Keep_Names:                            Pragma Keep_Names.  (line    6)
* Large:                                 Large.              (line    6)
* Latin_1 constants for Wide_Character:  Ada.Characters.Wide_Latin_1 (a-cwila1.ads).
                                                             (line    6)
* Latin_1 constants for Wide_Wide_Character: Ada.Characters.Wide_Wide_Latin_1 (a-chzla1.ads).
                                                             (line    6)
* Latin_9 constants for Character:       Ada.Characters.Latin_9 (a-chlat9.ads).
                                                             (line    6)
* Latin_9 constants for Wide_Character:  Ada.Characters.Wide_Latin_9 (a-cwila9.ads).
                                                             (line    6)
* Latin_9 constants for Wide_Wide_Character: Ada.Characters.Wide_Wide_Latin_9 (a-chzla9.ads).
                                                             (line    6)
* License:                               Pragma License.     (line    6)
* License checking:                      Pragma License.     (line    6)
* Line:                                  Line.               (line    6)
* Link_With:                             Pragma Link_With.   (line    6)
* Linker_Alias:                          Pragma Linker_Alias.
                                                             (line    6)
* Linker_Constructor:                    Pragma Linker_Constructor.
                                                             (line    6)
* Linker_Destructor:                     Pragma Linker_Destructor.
                                                             (line    6)
* Linker_Section:                        Pragma Linker_Section.
                                                             (line    6)
* Little endian:                         Default_Bit_Order.  (line    6)
* Local storage pool:                    System.Pool_Local (s-pooloc.ads).
                                                             (line    6)
* Locking:                               GNAT.Task_Lock (g-tasloc.ads).
                                                             (line    6)
* Locking Policies:                      Implementation Advice.
                                                             (line 1020)
* Locking using files:                   GNAT.Lock_Files (g-locfil.ads).
                                                             (line    6)
* Long_Float:                            Pragma Long_Float.  (line    6)
* Machine Code insertions:               Machine Code Insertions.
                                                             (line    6)
* Machine operations:                    Implementation Advice.
                                                             (line  889)
* Machine_Attribute:                     Pragma Machine_Attribute.
                                                             (line    6)
* Machine_Size:                          Machine_Size.       (line    6)
* Mailboxes:                             GNAT.Bounded_Mailboxes (g-boumai.ads).
                                                             (line    6)
* Main:                                  Pragma Main.        (line    6)
* Main_Storage:                          Pragma Main_Storage.
                                                             (line    6)
* Mantissa:                              Mantissa.           (line    6)
* Maps <1>:                              GNAT.Spitbol.Table_VString (g-sptavs.ads).
                                                             (line    6)
* Maps:                                  GNAT.Spitbol.Table_Integer (g-sptain.ads).
                                                             (line    6)
* Max_Asynchronous_Select_Nesting:       Max_Asynchronous_Select_Nesting.
                                                             (line    6)
* Max_Entry_Queue_Length:                Max_Entry_Queue_Length.
                                                             (line    6)
* Max_Interrupt_Priority:                Max_Interrupt_Priority.
                                                             (line    6)
* Max_Priority:                          Max_Priority.       (line    6)
* Max_Protected_Entries:                 Max_Protected_Entries.
                                                             (line    6)
* Max_Select_Alternatives:               Max_Select_Alternatives.
                                                             (line    6)
* Max_Storage_At_Blocking:               Max_Storage_At_Blocking.
                                                             (line    6)
* Max_Task_Entries:                      Max_Task_Entries.   (line    6)
* Max_Tasks:                             Max_Tasks.          (line    6)
* Maximum_Alignment:                     Maximum_Alignment.  (line    6)
* Maximum_Alignment attribute:           Alignment Clauses.  (line   14)
* Mechanism_Code:                        Mechanism_Code.     (line    6)
* Memory allocation:                     System.Memory (s-memory.ads).
                                                             (line    6)
* Memory corruption debugging:           GNAT.Debug_Pools (g-debpoo.ads).
                                                             (line    6)
* Message Digest MD5:                    GNAT.MD5 (g-md5.ads).
                                                             (line    6)
* Multidimensional arrays:               Implementation Advice.
                                                             (line  191)
* Named assertions <1>:                  Pragma Check.       (line    6)
* Named assertions:                      Pragma Check_Policy.
                                                             (line    6)
* Named numbers, representation of:      Universal_Literal_String.
                                                             (line    6)
* No_Abort_Statements:                   No_Abort_Statements.
                                                             (line    6)
* No_Access_Parameter_Allocators:        No_Access_Parameter_Allocators.
                                                             (line    6)
* No_Access_Subprograms:                 No_Access_Subprograms.
                                                             (line    6)
* No_Allocators:                         No_Allocators.      (line    6)
* No_Anonymous_Allocators:               No_Anonymous_Allocators.
                                                             (line    6)
* No_Body:                               Pragma No_Body.     (line    6)
* No_Calendar:                           No_Calendar.        (line    6)
* No_Coextensions:                       No_Coextensions.    (line    6)
* No_Default_Initialization:             No_Default_Initialization.
                                                             (line    6)
* No_Delay:                              No_Delay.           (line    6)
* No_Dependence:                         No_Dependence.      (line    6)
* No_Direct_Boolean_Operators:           No_Direct_Boolean_Operators.
                                                             (line    6)
* No_Dispatch:                           No_Dispatch.        (line    6)
* No_Dispatching_Calls:                  No_Dispatching_Calls.
                                                             (line    6)
* No_Dynamic_Attachment:                 No_Dynamic_Attachment.
                                                             (line    6)
* No_Dynamic_Priorities:                 No_Dynamic_Priorities.
                                                             (line    6)
* No_Elaboration_Code:                   No_Elaboration_Code.
                                                             (line    6)
* No_Entry_Calls_In_Elaboration_Code:    No_Entry_Calls_In_Elaboration_Code.
                                                             (line    6)
* No_Entry_Queue:                        No_Entry_Queue.     (line    6)
* No_Enumeration_Maps:                   No_Enumeration_Maps.
                                                             (line    6)
* No_Exception_Handlers:                 No_Exception_Handlers.
                                                             (line    6)
* No_Exception_Propagation:              No_Exception_Propagation.
                                                             (line    6)
* No_Exception_Registration:             No_Exception_Registration.
                                                             (line    6)
* No_Exceptions:                         No_Exceptions.      (line    6)
* No_Finalization:                       No_Finalization.    (line    6)
* No_Fixed_Point:                        No_Fixed_Point.     (line    6)
* No_Floating_Point:                     No_Floating_Point.  (line    6)
* No_Implementation_Aspect_Specifications: No_Implementation_Aspect_Specifications.
                                                             (line    6)
* No_Implementation_Attributes:          No_Implementation_Attributes.
                                                             (line    6)
* No_Implementation_Identifiers:         No_Implementation_Identifiers.
                                                             (line    6)
* No_Implementation_Pragmas:             No_Implementation_Pragmas.
                                                             (line    6)
* No_Implementation_Restrictions:        No_Implementation_Restrictions.
                                                             (line    6)
* No_Implementation_Units:               No_Implementation_Units.
                                                             (line    6)
* No_Implicit_Aliasing:                  No_Implicit_Aliasing.
                                                             (line    6)
* No_Implicit_Conditionals:              No_Implicit_Conditionals.
                                                             (line    6)
* No_Implicit_Dynamic_Code:              No_Implicit_Dynamic_Code.
                                                             (line    6)
* No_Implicit_Heap_Allocations:          No_Implicit_Heap_Allocations.
                                                             (line    6)
* No_Implicit_Loops:                     No_Implicit_Loops.  (line    6)
* No_Initialize_Scalars:                 No_Initialize_Scalars.
                                                             (line    6)
* No_IO:                                 No_IO.              (line    6)
* No_Local_Allocators:                   No_Local_Allocators.
                                                             (line    6)
* No_Local_Protected_Objects:            No_Local_Protected_Objects.
                                                             (line    6)
* No_Local_Timing_Events:                No_Local_Timing_Events.
                                                             (line    6)
* No_Nested_Finalization:                No_Nested_Finalization.
                                                             (line    6)
* No_Obsolescent_Features:               No_Obsolescent_Features.
                                                             (line    6)
* No_Protected_Type_Allocators:          No_Protected_Type_Allocators.
                                                             (line    6)
* No_Protected_Types:                    No_Protected_Types. (line    6)
* No_Recursion:                          No_Recursion.       (line    6)
* No_Reentrancy:                         No_Reentrancy.      (line    6)
* No_Relative_Delay:                     No_Relative_Delay.  (line    6)
* No_Requeue_Statements:                 No_Requeue_Statements.
                                                             (line    6)
* No_Return:                             Pragma No_Return.   (line    6)
* No_Secondary_Stack:                    No_Secondary_Stack. (line    6)
* No_Select_Statements:                  No_Select_Statements.
                                                             (line    6)
* No_Specific_Termination_Handlers:      No_Specific_Termination_Handlers.
                                                             (line    6)
* No_Specification_of_Aspect:            No_Specification_of_Aspect.
                                                             (line    6)
* No_Standard_Allocators_After_Elaboration: No_Standard_Allocators_After_Elaboration.
                                                             (line    6)
* No_Standard_Storage_Pools:             No_Standard_Storage_Pools.
                                                             (line    6)
* No_Stream_Optimizations:               No_Stream_Optimizations.
                                                             (line    6)
* No_Streams:                            No_Streams.         (line    6)
* No_Strict_Aliasing:                    Pragma No_Strict_Aliasing.
                                                             (line    6)
* No_Task_Allocators:                    No_Task_Allocators. (line    6)
* No_Task_Attributes_Package:            No_Task_Attributes_Package.
                                                             (line    6)
* No_Task_Hierarchy:                     No_Task_Hierarchy.  (line    6)
* No_Task_Termination:                   No_Task_Termination.
                                                             (line    6)
* No_Tasking:                            No_Tasking.         (line    6)
* No_Terminate_Alternatives:             No_Terminate_Alternatives.
                                                             (line    6)
* No_Unchecked_Access:                   No_Unchecked_Access.
                                                             (line    6)
* No_Wide_Characters:                    No_Wide_Characters. (line    6)
* Normalize_Scalars:                     Pragma Normalize_Scalars.
                                                             (line    6)
* Null_Occurrence, testing for <1>:      Ada.Exceptions.Last_Chance_Handler (a-elchha.ads).
                                                             (line    6)
* Null_Occurrence, testing for:          Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads).
                                                             (line    6)
* Null_Parameter:                        Null_Parameter.     (line    6)
* Numerics:                              Implementation Advice.
                                                             (line 1124)
* Object_Size <1>:                       Object_Size.        (line    6)
* Object_Size:                           Value_Size and Object_Size Clauses.
                                                             (line    6)
* Obsolescent:                           Pragma Obsolescent. (line    6)
* OpenVMS <1>:                           Pragma Main.        (line    6)
* OpenVMS <2>:                           Pragma Ident.       (line   14)
* OpenVMS <3>:                           AST_Entry.          (line    6)
* OpenVMS <4>:                           Pragma Import_Function.
                                                             (line   66)
* OpenVMS <5>:                           Pragma Time_Slice.  (line   13)
* OpenVMS <6>:                           Pragma Component_Alignment.
                                                             (line   40)
* OpenVMS <7>:                           Pragma Main_Storage.
                                                             (line    6)
* OpenVMS <8>:                           Pragma Export_Function.
                                                             (line   66)
* OpenVMS <9>:                           Pragma Float_Representation.
                                                             (line    6)
* OpenVMS <10>:                          Pragma Ast_Entry.   (line    6)
* OpenVMS <11>:                          Mechanism_Code.     (line   43)
* OpenVMS <12>:                          Pragma Export_Valued_Procedure.
                                                             (line   55)
* OpenVMS <13>:                          Pragma Long_Float.  (line    6)
* OpenVMS <14>:                          Pragma Export_Exception.
                                                             (line    6)
* OpenVMS <15>:                          Pragma Export_Procedure.
                                                             (line   50)
* OpenVMS:                               Pragma Import_Exception.
                                                             (line    6)
* Operating System interface:            GNAT.OS_Lib (g-os_lib.ads).
                                                             (line    6)
* Operations, on Address:                Implementation Advice.
                                                             (line  554)
* Optimize_Alignment:                    Pragma Optimize_Alignment.
                                                             (line    6)
* Ordered:                               Pragma Ordered.     (line    6)
* ordering, of bits:                     Bit_Order Clauses.  (line    6)
* ordering, of bytes:                    Effect of Bit_Order on Byte Ordering.
                                                             (line    6)
* Overlaying of objects:                 Address Clauses.    (line  164)
* Package Interfaces:                    Implementation Advice.
                                                             (line  758)
* Package Interrupts:                    Implementation Advice.
                                                             (line  975)
* Package Task_Attributes:               Implementation Advice.
                                                             (line 1006)
* Packed Decimal:                        Interfaces.Packed_Decimal (i-pacdec.ads).
                                                             (line    6)
* Packed types:                          Implementation Advice.
                                                             (line  296)
* Parameters, passing mechanism:         Mechanism_Code.     (line    6)
* Parameters, when passed by reference <1>: Passed_By_Reference.
                                                             (line    6)
* Parameters, when passed by reference:  Pool_Address.       (line    6)
* Parsing <1>:                           GNAT.Bounded_Mailboxes (g-boumai.ads).
                                                             (line    6)
* Parsing <2>:                           GNAT.Bounded_Buffers (g-boubuf.ads).
                                                             (line    6)
* Parsing:                               GNAT.AWK (g-awk.ads).
                                                             (line    6)
* Partition communication subsystem:     Implementation Advice.
                                                             (line 1085)
* Partition interfacing functions:       System.Partition_Interface (s-parint.ads).
                                                             (line    6)
* Passed_By_Reference:                   Passed_By_Reference.
                                                             (line    6)
* Passing by copy:                       Pragma C_Pass_By_Copy.
                                                             (line    6)
* Passing by descriptor <1>:             Pragma Export_Function.
                                                             (line   66)
* Passing by descriptor <2>:             Pragma Export_Procedure.
                                                             (line   50)
* Passing by descriptor <3>:             Pragma Export_Valued_Procedure.
                                                             (line   55)
* Passing by descriptor:                 Pragma Import_Function.
                                                             (line   66)
* Passive:                               Pragma Passive.     (line    6)
* Pattern matching <1>:                  GNAT.Spitbol.Patterns (g-spipat.ads).
                                                             (line    6)
* Pattern matching <2>:                  GNAT.Regpat (g-regpat.ads).
                                                             (line    6)
* Pattern matching:                      GNAT.Regexp (g-regexp.ads).
                                                             (line    6)
* PCS:                                   Implementation Advice.
                                                             (line 1085)
* Persistent_BSS:                        Pragma Persistent_BSS.
                                                             (line    6)
* Polling:                               Pragma Polling.     (line    6)
* Pool_Address:                          Pool_Address.       (line    6)
* Portability:                           About This Guide.   (line   24)
* Postconditions <1>:                    Old.                (line    6)
* Postconditions:                        Pragma Postcondition.
                                                             (line    6)
* pragma Ada_2012:                       Implementation of Ada 2012 Features.
                                                             (line    9)
* pragma Ordered:                        Pragma Ordered.     (line    6)
* Pragma Pack (for arrays):              Pragma Pack for Arrays.
                                                             (line    6)
* Pragma Pack (for records):             Pragma Pack for Records.
                                                             (line    6)
* Pragma Pack (for type Natural):        Pragma Pack for Arrays.
                                                             (line   74)
* Pragma Pack warning:                   Pragma Pack for Arrays.
                                                             (line   74)
* pragma Shared_Passive:                 GNAT Implementation of Shared Passive Packages.
                                                             (line    6)
* Pragma, representation:                Representation Clauses and Pragmas.
                                                             (line   25)
* Pragmas:                               Implementation Advice.
                                                             (line   56)
* Pre-elaboration requirements:          Implementation Advice.
                                                             (line  986)
* Preconditions:                         Pragma Precondition.
                                                             (line    6)
* Preemptive abort:                      Implementation Advice.
                                                             (line 1038)
* Priority, maximum:                     Max_Priority.       (line    6)
* Protected procedure handlers:          Implementation Advice.
                                                             (line  961)
* Psect_Object:                          Pragma Psect_Object.
                                                             (line    6)
* Pure:                                  Pragma Pure_Function.
                                                             (line   36)
* Pure packages, exceptions:             GNAT.Exceptions (g-except.ads).
                                                             (line    6)
* Pure_Function:                         Pragma Pure_Function.
                                                             (line    6)
* Random number generation <1>:          GNAT.Random_Numbers (g-rannum.ads).
                                                             (line    6)
* Random number generation <2>:          GNAT.MBBS_Float_Random (g-mbflra.ads).
                                                             (line    6)
* Random number generation <3>:          GNAT.MBBS_Discrete_Random (g-mbdira.ads).
                                                             (line    6)
* Random number generation:              Implementation Advice.
                                                             (line  690)
* Range_Length:                          Range_Length.       (line    6)
* Ravenscar:                             Pragma Profile (Ravenscar).
                                                             (line    6)
* Read attribute:                        Implementation Advice.
                                                             (line  649)
* Real-Time Systems Annex compliance:    Ensuring Compliance with the Real-Time Annex.
                                                             (line    6)
* Record Representation Clause:          Record Representation Clauses.
                                                             (line    6)
* Record representation clauses:         Implementation Advice.
                                                             (line  480)
* Ref:                                   Ref.                (line    6)
* Regular expressions <1>:               GNAT.Regpat (g-regpat.ads).
                                                             (line    6)
* Regular expressions:                   GNAT.Regexp (g-regexp.ads).
                                                             (line    6)
* Remote_Access_Type:                    Pragma Remote_Access_Type.
                                                             (line    6)
* Removing command line arguments:       Ada.Command_Line.Remove (a-colire.ads).
                                                             (line    6)
* Representation Clause:                 Representation Clauses and Pragmas.
                                                             (line   25)
* Representation clauses:                Implementation Advice.
                                                             (line  260)
* Representation Clauses:                Representation Clauses and Pragmas.
                                                             (line    6)
* Representation clauses, enumeration:   Implementation Advice.
                                                             (line  468)
* Representation clauses, records:       Implementation Advice.
                                                             (line  480)
* Representation of enums <1>:           Enum_Val.           (line    6)
* Representation of enums:               Enum_Rep.           (line    6)
* Representation of wide characters:     System.Wch_Cnv (s-wchcnv.ads).
                                                             (line    6)
* Representation Pragma:                 Representation Clauses and Pragmas.
                                                             (line   25)
* Representation, determination of:      Determining the Representations chosen by GNAT.
                                                             (line    6)
* Response file for command line:        Ada.Command_Line.Response_File (a-clrefi.ads).
                                                             (line    6)
* Restricted Run Time:                   Pragma Profile (Restricted).
                                                             (line    6)
* Restriction_Warnings:                  Pragma Restriction_Warnings.
                                                             (line    6)
* Restrictions definitions:              System.Rident (s-rident.ads).
                                                             (line    6)
* Result:                                Result.             (line    6)
* Return values, passing mechanism:      Mechanism_Code.     (line    6)
* Rotate_Left:                           Shifts and Rotates. (line    6)
* Rotate_Right:                          Shifts and Rotates. (line    6)
* Run-time restrictions access:          System.Restrictions (s-restri.ads).
                                                             (line    6)
* Safe_Emax:                             Safe_Emax.          (line    6)
* Safe_Large:                            Safe_Large.         (line    6)
* Secondary Stack Info:                  GNAT.Secondary_Stack_Info (g-sestin.ads).
                                                             (line    6)
* Secure Hash Algorithm SHA-1:           GNAT.SHA1 (g-sha1.ads).
                                                             (line    6)
* Secure Hash Algorithm SHA-224:         GNAT.SHA224 (g-sha224.ads).
                                                             (line    6)
* Secure Hash Algorithm SHA-256:         GNAT.SHA256 (g-sha256.ads).
                                                             (line    6)
* Secure Hash Algorithm SHA-384:         GNAT.SHA384 (g-sha384.ads).
                                                             (line    6)
* Secure Hash Algorithm SHA-512:         GNAT.SHA512 (g-sha512.ads).
                                                             (line    6)
* Semaphores:                            GNAT.Semaphores (g-semaph.ads).
                                                             (line    6)
* Serial_Communications:                 GNAT.Serial_Communications (g-sercom.ads).
                                                             (line    6)
* Sets of strings:                       GNAT.Spitbol.Table_Boolean (g-sptabo.ads).
                                                             (line    6)
* Shared:                                Pragma Shared.      (line    6)
* Shared passive packages:               GNAT Implementation of Shared Passive Packages.
                                                             (line    6)
* SHARED_MEMORY_DIRECTORY environment variable: GNAT Implementation of Shared Passive Packages.
                                                             (line   34)
* Shift_Left:                            Shifts and Rotates. (line    6)
* Shift_Right:                           Shifts and Rotates. (line    6)
* Shift_Right_Arithmetic:                Shifts and Rotates. (line    6)
* Short_Circuit_And_Or:                  Pragma Short_Circuit_And_Or.
                                                             (line    6)
* Short_Descriptors:                     Pragma Short_Descriptors.
                                                             (line    6)
* Signals:                               GNAT.Signals (g-signal.ads).
                                                             (line    6)
* Simple I/O:                            GNAT.IO (g-io.ads). (line    6)
* Simple storage pool <1>:               Pragma Simple_Storage_Pool_Type.
                                                             (line    6)
* Simple storage pool:                   Simple_Storage_Pool.
                                                             (line    6)
* Simple_Barriers:                       Simple_Barriers.    (line    6)
* Simple_Storage_Pool:                   Simple_Storage_Pool.
                                                             (line    6)
* Simple_Storage_Pool_Type:              Pragma Simple_Storage_Pool_Type.
                                                             (line    6)
* Size Clause:                           Size Clauses.       (line    6)
* Size clauses:                          Implementation Advice.
                                                             (line  398)
* Size for biased representation:        Biased Representation.
                                                             (line    6)
* Size of Address:                       Address_Size.       (line    6)
* Size, of objects:                      Value_Size and Object_Size Clauses.
                                                             (line    6)
* Size, setting for not-first subtype:   Value_Size.         (line    6)
* Size, used for objects:                Object_Size.        (line    6)
* Size, VADS compatibility <1>:          Pragma Use_VADS_Size.
                                                             (line    6)
* Size, VADS compatibility:              VADS_Size.          (line    6)
* Size, variant record objects:          Size of Variant Record Objects.
                                                             (line    6)
* Small:                                 Small.              (line    6)
* Sockets:                               GNAT.Sockets (g-socket.ads).
                                                             (line    6)
* Sorting <1>:                           GNAT.Heap_Sort_G (g-hesorg.ads).
                                                             (line    6)
* Sorting <2>:                           GNAT.Bubble_Sort_A (g-busora.ads).
                                                             (line    6)
* Sorting <3>:                           GNAT.Bubble_Sort (g-bubsor.ads).
                                                             (line    6)
* Sorting <4>:                           GNAT.Heap_Sort_A (g-hesora.ads).
                                                             (line    6)
* Sorting <5>:                           GNAT.Heap_Sort (g-heasor.ads).
                                                             (line    6)
* Sorting:                               GNAT.Bubble_Sort_G (g-busorg.ads).
                                                             (line    6)
* Source Information:                    GNAT.Source_Info (g-souinf.ads).
                                                             (line    6)
* Source_File_Name:                      Pragma Source_File_Name.
                                                             (line    6)
* Source_File_Name_Project:              Pragma Source_File_Name_Project.
                                                             (line    6)
* Source_Location:                       Source_Location.    (line    6)
* Source_Reference:                      Pragma Source_Reference.
                                                             (line    6)
* SPARK:                                 SPARK.              (line    6)
* Spawn capability:                      GNAT.OS_Lib (g-os_lib.ads).
                                                             (line    6)
* Spell checking <1>:                    GNAT.Wide_Wide_Spelling_Checker (g-zspche.ads).
                                                             (line    6)
* Spell checking <2>:                    GNAT.Spelling_Checker_Generic (g-spchge.ads).
                                                             (line    6)
* Spell checking <3>:                    GNAT.UTF_32_Spelling_Checker (g-u3spch.ads).
                                                             (line    6)
* Spell checking <4>:                    GNAT.Spelling_Checker (g-speche.ads).
                                                             (line    6)
* Spell checking:                        GNAT.Wide_Spelling_Checker (g-wispch.ads).
                                                             (line    6)
* SPITBOL interface:                     GNAT.Spitbol (g-spitbo.ads).
                                                             (line    6)
* SPITBOL pattern matching:              GNAT.Spitbol.Patterns (g-spipat.ads).
                                                             (line    6)
* SPITBOL Tables <1>:                    GNAT.Spitbol.Table_VString (g-sptavs.ads).
                                                             (line    6)
* SPITBOL Tables <2>:                    GNAT.Spitbol.Table_Boolean (g-sptabo.ads).
                                                             (line    6)
* SPITBOL Tables:                        GNAT.Spitbol.Table_Integer (g-sptain.ads).
                                                             (line    6)
* Static_Elaboration_Desired:            Pragma Static_Elaboration_Desired.
                                                             (line    6)
* Static_Priorities:                     Static_Priorities.  (line    6)
* Static_Storage_Size:                   Static_Storage_Size.
                                                             (line    6)
* Storage place attributes:              Implementation Advice.
                                                             (line  521)
* Storage pool, global:                  System.Pool_Global (s-pooglo.ads).
                                                             (line    6)
* Storage pool, local:                   System.Pool_Local (s-pooloc.ads).
                                                             (line    6)
* Storage pool, simple <1>:              Simple_Storage_Pool.
                                                             (line    6)
* Storage pool, simple:                  Pragma Simple_Storage_Pool_Type.
                                                             (line    6)
* Storage_Size Clause:                   Storage_Size Clauses.
                                                             (line    6)
* Storage_Unit <1>:                      Storage_Unit.       (line    6)
* Storage_Unit:                          Pragma Component_Alignment.
                                                             (line   35)
* Stream files:                          Treating Text_IO Files as Streams.
                                                             (line    6)
* Stream operations:                     System.Strings.Stream_Ops (s-ststop.ads).
                                                             (line    6)
* Stream oriented attributes:            Implementation Advice.
                                                             (line  633)
* Stream_Convert:                        Pragma Stream_Convert.
                                                             (line    6)
* String decoding:                       GNAT.Decode_String (g-decstr.ads).
                                                             (line    6)
* String encoding:                       GNAT.Encode_String (g-encstr.ads).
                                                             (line    6)
* String maps:                           GNAT.Spitbol.Table_VString (g-sptavs.ads).
                                                             (line    6)
* String splitter:                       GNAT.String_Split (g-strspl.ads).
                                                             (line    6)
* String stream operations:              System.Strings.Stream_Ops (s-ststop.ads).
                                                             (line    6)
* Stub_Type:                             Stub_Type.          (line    6)
* Style_Checks:                          Pragma Style_Checks.
                                                             (line    6)
* Subprogram address:                    Code_Address.       (line    6)
* Subtitle:                              Pragma Subtitle.    (line    6)
* Suppress:                              Pragma Suppress.    (line    6)
* Suppress_All:                          Pragma Suppress_All.
                                                             (line    6)
* Suppress_Exception_Locations:          Pragma Suppress_Exception_Locations.
                                                             (line    6)
* Suppress_Initialization:               Pragma Suppress_Initialization.
                                                             (line    6)
* Suppressing external name <1>:         Pragma Export_Valued_Procedure.
                                                             (line   60)
* Suppressing external name <2>:         Pragma Export_Function.
                                                             (line   71)
* Suppressing external name:             Pragma Export_Procedure.
                                                             (line   55)
* Suppressing initialization:            Pragma Suppress_Initialization.
                                                             (line    6)
* Suppression of checks:                 Implementation Advice.
                                                             (line  252)
* system, extending:                     Pragma Extend_System.
                                                             (line    6)
* System.Address_Image (s-addima.ads):   System.Address_Image (s-addima.ads).
                                                             (line    6)
* System.Assertions (s-assert.ads):      System.Assertions (s-assert.ads).
                                                             (line    6)
* System.Memory (s-memory.ads):          System.Memory (s-memory.ads).
                                                             (line    6)
* System.Partition_Interface (s-parint.ads): System.Partition_Interface (s-parint.ads).
                                                             (line    6)
* System.Pool_Global (s-pooglo.ads):     System.Pool_Global (s-pooglo.ads).
                                                             (line    6)
* System.Pool_Local (s-pooloc.ads):      System.Pool_Local (s-pooloc.ads).
                                                             (line    6)
* System.Restrictions (s-restri.ads):    System.Restrictions (s-restri.ads).
                                                             (line    6)
* System.Rident (s-rident.ads):          System.Rident (s-rident.ads).
                                                             (line    6)
* System.Strings.Stream_Ops (s-ststop.ads): System.Strings.Stream_Ops (s-ststop.ads).
                                                             (line    6)
* System.Task_Info (s-tasinf.ads):       System.Task_Info (s-tasinf.ads).
                                                             (line    6)
* System.Wch_Cnv (s-wchcnv.ads):         System.Wch_Cnv (s-wchcnv.ads).
                                                             (line    6)
* System.Wch_Con (s-wchcon.ads):         System.Wch_Con (s-wchcon.ads).
                                                             (line    6)
* System_Allocator_Alignment:            System_Allocator_Alignment.
                                                             (line    6)
* Table implementation <1>:              GNAT.Dynamic_Tables (g-dyntab.ads).
                                                             (line    6)
* Table implementation:                  GNAT.Table (g-table.ads).
                                                             (line    6)
* Target_Name:                           Target_Name.        (line    6)
* Task locking:                          GNAT.Task_Lock (g-tasloc.ads).
                                                             (line    6)
* Task specific storage:                 Pragma Thread_Local_Storage.
                                                             (line    6)
* Task synchronization:                  GNAT.Task_Lock (g-tasloc.ads).
                                                             (line    6)
* Task_Attributes:                       Implementation Advice.
                                                             (line 1006)
* Task_Info:                             Pragma Task_Info.   (line    6)
* Task_Info pragma:                      System.Task_Info (s-tasinf.ads).
                                                             (line    6)
* Task_Name:                             Pragma Task_Name.   (line    6)
* Task_Storage:                          Pragma Task_Storage.
                                                             (line    6)
* Tasking restrictions:                  Implementation Advice.
                                                             (line 1054)
* Test cases:                            Pragma Test_Case.   (line    6)
* Test_Case:                             Pragma Test_Case.   (line    6)
* Text_IO:                               GNAT.IO_Aux (g-io_aux.ads).
                                                             (line    6)
* Text_IO extensions:                    Text_IO Extensions. (line    6)
* Text_IO for unbounded strings:         Text_IO Facilities for Unbounded Strings.
                                                             (line    6)
* Text_IO resetting standard files:      Ada.Text_IO.Reset_Standard_Files (a-tirsfi.ads).
                                                             (line    6)
* Text_IO, extensions for unbounded strings: Ada.Strings.Unbounded.Text_IO (a-suteio.ads).
                                                             (line    6)
* Text_IO, extensions for unbounded wide strings: Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads).
                                                             (line    6)
* Text_IO, extensions for unbounded wide wide strings: Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads).
                                                             (line    6)
* Thread_Local_Storage:                  Pragma Thread_Local_Storage.
                                                             (line    6)
* Threads, foreign:                      GNAT.Threads (g-thread.ads).
                                                             (line    6)
* Tick:                                  Tick.               (line    6)
* Time:                                  GNAT.Calendar.Time_IO (g-catiio.ads).
                                                             (line    6)
* Time stamp:                            GNAT.Time_Stamp (g-timsta.ads).
                                                             (line    6)
* Time, monotonic:                       Implementation Advice.
                                                             (line 1065)
* Time_Slice:                            Pragma Time_Slice.  (line    6)
* Title:                                 Pragma Title.       (line    6)
* TLS (Thread Local Storage):            Pragma Thread_Local_Storage.
                                                             (line    6)
* To_Address <1>:                        Address Clauses.    (line   80)
* To_Address:                            To_Address.         (line    6)
* Trace back facilities <1>:             GNAT.Traceback (g-traceb.ads).
                                                             (line    6)
* Trace back facilities:                 GNAT.Traceback.Symbolic (g-trasym.ads).
                                                             (line    6)
* Traceback for Exception Occurrence:    Ada.Exceptions.Traceback (a-exctra.ads).
                                                             (line    6)
* trampoline:                            No_Implicit_Dynamic_Code.
                                                             (line    6)
* Type_Class:                            Type_Class.         (line    6)
* Typographical conventions:             Conventions.        (line    6)
* UET_Address:                           UET_Address.        (line    6)
* Unbounded_String, IO support:          Ada.Strings.Unbounded.Text_IO (a-suteio.ads).
                                                             (line    6)
* Unbounded_String, Text_IO operations:  Text_IO Facilities for Unbounded Strings.
                                                             (line    6)
* Unbounded_Wide_String, IO support:     Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads).
                                                             (line    6)
* Unbounded_Wide_Wide_String, IO support: Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads).
                                                             (line    6)
* Unchecked conversion:                  Implementation Advice.
                                                             (line  565)
* Unchecked deallocation:                Implementation Advice.
                                                             (line  626)
* Unchecked_Union:                       Pragma Unchecked_Union.
                                                             (line    6)
* Unconstrained_Array:                   Unconstrained_Array.
                                                             (line    6)
* Unicode <1>:                           GNAT.Encode_String (g-encstr.ads).
                                                             (line    6)
* Unicode <2>:                           GNAT.Decode_String (g-decstr.ads).
                                                             (line    6)
* Unicode <3>:                           GNAT.Encode_UTF8_String (g-enutst.ads).
                                                             (line    6)
* Unicode:                               GNAT.Decode_UTF8_String (g-deutst.ads).
                                                             (line    6)
* Unicode categorization, Wide_Character: Ada.Wide_Characters.Unicode (a-wichun.ads).
                                                             (line    6)
* Unicode categorization, Wide_Wide_Character: Ada.Wide_Wide_Characters.Unicode (a-zchuni.ads).
                                                             (line    6)
* Unimplemented_Unit:                    Pragma Unimplemented_Unit.
                                                             (line    6)
* Unions in C:                           Pragma Unchecked_Union.
                                                             (line    6)
* Universal_Aliasing:                    Pragma Universal_Aliasing.
                                                             (line    6)
* Universal_Data:                        Pragma Universal_Data.
                                                             (line    6)
* Universal_Literal_String:              Universal_Literal_String.
                                                             (line    6)
* Unmodified:                            Pragma Unmodified.  (line    6)
* Unreferenced:                          Pragma Unreferenced.
                                                             (line    6)
* Unreferenced_Objects:                  Pragma Unreferenced_Objects.
                                                             (line    6)
* Unreserve_All_Interrupts:              Pragma Unreserve_All_Interrupts.
                                                             (line    6)
* Unrestricted_Access:                   Unrestricted_Access.
                                                             (line    6)
* Unsuppress:                            Pragma Unsuppress.  (line    6)
* Use_VADS_Size:                         Pragma Use_VADS_Size.
                                                             (line    6)
* UTF-8 <1>:                             GNAT.Encode_UTF8_String (g-enutst.ads).
                                                             (line    6)
* UTF-8 <2>:                             GNAT.Decode_UTF8_String (g-deutst.ads).
                                                             (line    6)
* UTF-8 <3>:                             GNAT.Encode_String (g-encstr.ads).
                                                             (line    6)
* UTF-8:                                 GNAT.Decode_String (g-decstr.ads).
                                                             (line    6)
* UTF-8 representation:                  GNAT.Byte_Order_Mark (g-byorma.ads).
                                                             (line    6)
* UTF-8 string decoding:                 GNAT.Decode_UTF8_String (g-deutst.ads).
                                                             (line    6)
* UTF-8 string encoding:                 GNAT.Encode_UTF8_String (g-enutst.ads).
                                                             (line    6)
* VADS_Size:                             VADS_Size.          (line    6)
* Validity_Checks:                       Pragma Validity_Checks.
                                                             (line    6)
* Value_Size <1>:                        Value_Size and Object_Size Clauses.
                                                             (line    6)
* Value_Size:                            Value_Size.         (line    6)
* Variant record objects, size:          Size of Variant Record Objects.
                                                             (line    6)
* Version, of compiler:                  GNAT.Compiler_Version (g-comver.ads).
                                                             (line    6)
* Volatile:                              Pragma Volatile.    (line    6)
* VxWorks, Get_Immediate:                Interfaces.VxWorks.IO (i-vxwoio.ads).
                                                             (line    6)
* VxWorks, I/O interfacing:              Interfaces.VxWorks.IO (i-vxwoio.ads).
                                                             (line    6)
* VxWorks, interfacing:                  Interfaces.VxWorks (i-vxwork.ads).
                                                             (line    6)
* Warnings:                              Pragma Warnings.    (line    6)
* Warnings, unmodified:                  Pragma Unmodified.  (line    6)
* Warnings, unreferenced <1>:            Pragma Unreferenced.
                                                             (line    6)
* Warnings, unreferenced:                Pragma Unreferenced_Objects.
                                                             (line    6)
* Wchar_T_Size:                          Wchar_T_Size.       (line    6)
* Weak_External:                         Pragma Weak_External.
                                                             (line    6)
* Wide characte representations:         GNAT.Byte_Order_Mark (g-byorma.ads).
                                                             (line    6)
* Wide character codes:                  GNAT.UTF_32 (g-utf_32.ads).
                                                             (line    6)
* Wide character decoding:               GNAT.Decode_UTF8_String (g-deutst.ads).
                                                             (line    6)
* Wide character encoding <1>:           GNAT.Decode_String (g-decstr.ads).
                                                             (line    6)
* Wide character encoding <2>:           GNAT.Encode_String (g-encstr.ads).
                                                             (line    6)
* Wide character encoding:               GNAT.Encode_UTF8_String (g-enutst.ads).
                                                             (line    6)
* Wide Character, Representation:        System.Wch_Cnv (s-wchcnv.ads).
                                                             (line    6)
* Wide String, Conversion:               System.Wch_Cnv (s-wchcnv.ads).
                                                             (line    6)
* Wide_Character_Encoding:               Pragma Wide_Character_Encoding.
                                                             (line    6)
* Wide_String splitter:                  GNAT.Wide_String_Split (g-wistsp.ads).
                                                             (line    6)
* Wide_Text_IO resetting standard files: Ada.Wide_Text_IO.Reset_Standard_Files (a-wrstfi.ads).
                                                             (line    6)
* Wide_Wide_String splitter:             GNAT.Wide_Wide_String_Split (g-zistsp.ads).
                                                             (line    6)
* Wide_Wide_Text_IO resetting standard files: Ada.Wide_Wide_Text_IO.Reset_Standard_Files (a-zrstfi.ads).
                                                             (line    6)
* Windows Registry:                      GNAT.Registry (g-regist.ads).
                                                             (line    6)
* Word_Size:                             Word_Size.          (line    6)
* Write attribute:                       Implementation Advice.
                                                             (line  649)
* XDR representation:                    Implementation Advice.
                                                             (line  649)
* Zero address, passing:                 Null_Parameter.     (line    6)



Tag Table:
Node: Top721
Node: About This Guide15334
Node: What This Reference Manual Contains16906
Node: Conventions20176
Node: Related Information21166
Node: Implementation Defined Pragmas22566
Node: Pragma Abort_Defer26939
Node: Pragma Ada_8327410
Node: Pragma Ada_9528623
Node: Pragma Ada_0529249
Node: Pragma Ada_200529747
Node: Pragma Ada_1230032
Node: Pragma Ada_201230670
Node: Pragma Annotate30957
Node: Pragma Assert32331
Node: Pragma Assertion_Policy34955
Node: Pragma Assume_No_Invalid_Values35926
Node: Pragma Ast_Entry37846
Node: Pragma C_Pass_By_Copy38787
Node: Pragma Check40071
Node: Pragma Check_Name41117
Node: Pragma Check_Policy42217
Node: Pragma Comment44632
Node: Pragma Common_Object45267
Node: Pragma Compile_Time_Error46262
Node: Pragma Compile_Time_Warning47480
Node: Pragma Compiler_Unit48425
Node: Pragma Complete_Representation49073
Node: Pragma Complex_Representation49774
Node: Pragma Component_Alignment50685
Node: Pragma Convention_Identifier53646
Node: Pragma CPP_Class54939
Node: Pragma CPP_Constructor56282
Node: Pragma CPP_Virtual58212
Node: Pragma CPP_Vtable58570
Node: Pragma Debug58916
Node: Pragma Debug_Policy59961
Node: Pragma Detect_Blocking60704
Node: Pragma Elaboration_Checks61109
Node: Pragma Eliminate61993
Node: Pragma Export_Exception65600
Node: Pragma Export_Function66534
Node: Pragma Export_Object69485
Node: Pragma Export_Procedure70283
Node: Pragma Export_Value72292
Node: Pragma Export_Valued_Procedure73086
Node: Pragma Extend_System75454
Node: Pragma Extensions_Allowed77605
Node: Pragma External78401
Node: Pragma External_Name_Casing79103
Node: Pragma Fast_Math82204
Node: Pragma Favor_Top_Level83204
Node: Pragma Finalize_Storage_Only83972
Node: Pragma Float_Representation84583
Node: Pragma Ident85972
Node: Pragma Implemented86828
Node: Pragma Implicit_Packing88476
Node: Pragma Import_Exception90352
Node: Pragma Import_Function91300
Node: Pragma Import_Object94518
Node: Pragma Import_Procedure95347
Node: Pragma Import_Valued_Procedure96667
Node: Pragma Initialize_Scalars98826
Node: Pragma Inline_Always101782
Node: Pragma Inline_Generic102192
Node: Pragma Interface102615
Node: Pragma Interface_Name103700
Node: Pragma Interrupt_Handler104343
Node: Pragma Interrupt_State105171
Node: Pragma Invariant108275
Node: Pragma Keep_Names109919
Node: Pragma License110630
Node: Pragma Link_With113850
Node: Pragma Linker_Alias114602
Node: Pragma Linker_Constructor115967
Node: Pragma Linker_Destructor117327
Node: Pragma Linker_Section118234
Node: Pragma Long_Float120067
Node: Pragma Machine_Attribute120784
Node: Pragma Main121766
Node: Pragma Main_Storage122332
Node: Pragma No_Body122939
Node: Pragma No_Return123844
Node: Pragma No_Strict_Aliasing124928
Node: Pragma Normalize_Scalars125791
Node: Pragma Obsolescent128846
Node: Pragma Optimize_Alignment132397
Node: Pragma Ordered135297
Node: Pragma Passive138294
Node: Pragma Persistent_BSS139140
Node: Pragma Polling140457
Node: Pragma Postcondition142345
Node: Pragma Precondition147742
Node: Pragma Profile (Ravenscar)149339
Node: Pragma Profile (Restricted)152385
Node: Pragma Psect_Object153386
Node: Pragma Pure_Function153875
Node: Pragma Remote_Access_Type157027
Node: Pragma Restriction_Warnings158052
Node: Pragma Shared158689
Node: Pragma Short_Circuit_And_Or158984
Node: Pragma Short_Descriptors159731
Node: Pragma Simple_Storage_Pool_Type160297
Node: Pragma Source_File_Name162675
Node: Pragma Source_File_Name_Project166307
Node: Pragma Source_Reference167234
Node: Pragma Static_Elaboration_Desired168223
Node: Pragma Stream_Convert169381
Node: Pragma Style_Checks172426
Node: Pragma Subtitle174853
Node: Pragma Suppress175178
Node: Pragma Suppress_All176410
Node: Pragma Suppress_Exception_Locations177087
Node: Pragma Suppress_Initialization178169
Node: Pragma Task_Info179247
Node: Pragma Task_Name179987
Node: Pragma Task_Storage181686
Node: Pragma Test_Case182342
Node: Pragma Thread_Local_Storage184464
Node: Pragma Time_Slice185612
Node: Pragma Title186269
Node: Pragma Unchecked_Union187114
Node: Pragma Unimplemented_Unit187810
Node: Pragma Universal_Aliasing188484
Node: Pragma Universal_Data189256
Node: Pragma Unmodified190322
Node: Pragma Unreferenced191148
Node: Pragma Unreferenced_Objects193381
Node: Pragma Unreserve_All_Interrupts194310
Node: Pragma Unsuppress195929
Node: Pragma Use_VADS_Size196696
Node: Pragma Validity_Checks197386
Node: Pragma Volatile199261
Node: Pragma Warnings199857
Node: Pragma Weak_External203918
Node: Pragma Wide_Character_Encoding205727
Node: Implementation Defined Attributes206742
Node: Abort_Signal208877
Node: Address_Size209380
Node: Asm_Input209839
Node: Asm_Output210547
Node: AST_Entry211399
Node: Bit211943
Node: Bit_Position213099
Node: Compiler_Version213609
Node: Code_Address214040
Node: Default_Bit_Order215454
Node: Descriptor_Size215901
Node: Elaborated216864
Node: Elab_Body217495
Node: Elab_Spec218131
Node: Elab_Subp_Body218771
Node: Emax219277
Node: Enabled219561
Node: Enum_Rep220729
Node: Enum_Val222126
Node: Epsilon222788
Node: Fixed_Value223082
Node: Has_Access_Values223860
Node: Has_Discriminants224486
Node: Img225019
Node: Integer_Value225508
Node: Invalid_Value226338
Node: Large226898
Node: Machine_Size227190
Node: Mantissa227470
Node: Max_Interrupt_Priority227783
Node: Max_Priority228101
Node: Maximum_Alignment228387
Node: Mechanism_Code228825
Node: Null_Parameter229848
Node: Object_Size230663
Node: Old231441
Node: Passed_By_Reference232935
Node: Pool_Address233419
Node: Range_Length234232
Node: Ref234687
Node: Result235031
Node: Safe_Emax235505
Node: Safe_Large235803
Node: Simple_Storage_Pool236117
Node: Small238724
Node: Storage_Unit239182
Node: Stub_Type239443
Node: System_Allocator_Alignment240484
Node: Target_Name241059
Node: Tick241525
Node: To_Address241753
Node: Type_Class242430
Node: UET_Address243379
Node: Unconstrained_Array243931
Node: Universal_Literal_String244446
Node: Unrestricted_Access245258
Node: VADS_Size246572
Node: Value_Size247290
Node: Wchar_T_Size247613
Node: Word_Size247961
Node: Implementation Defined Restrictions248188
Node: Partition-Wide Restrictions248822
Node: Immediate_Reclamation250975
Node: Max_Asynchronous_Select_Nesting251402
Node: Max_Entry_Queue_Length251878
Node: Max_Protected_Entries252459
Node: Max_Select_Alternatives252881
Node: Max_Storage_At_Blocking253158
Node: Max_Task_Entries253546
Node: Max_Tasks253926
Node: No_Abort_Statements254369
Node: No_Access_Parameter_Allocators254650
Node: No_Access_Subprograms255011
Node: No_Allocators255316
Node: No_Anonymous_Allocators255583
Node: No_Calendar255885
Node: No_Coextensions256171
Node: No_Default_Initialization256433
Node: No_Delay257247
Node: No_Dependence257521
Node: No_Direct_Boolean_Operators257783
Node: No_Dispatch258293
Node: No_Dispatching_Calls258584
Node: No_Dynamic_Attachment260793
Node: No_Dynamic_Priorities261209
Node: No_Entry_Calls_In_Elaboration_Code261493
Node: No_Enumeration_Maps261996
Node: No_Exception_Handlers262365
Node: No_Exception_Propagation263371
Node: No_Exception_Registration264179
Node: No_Exceptions264793
Node: No_Finalization265071
Node: No_Fixed_Point265997
Node: No_Floating_Point266275
Node: No_Implicit_Conditionals266571
Node: No_Implicit_Dynamic_Code267337
Node: No_Implicit_Heap_Allocations268673
Node: No_Implicit_Loops268955
Node: No_Initialize_Scalars269680
Node: No_IO270135
Node: No_Local_Allocators270467
Node: No_Local_Protected_Objects270800
Node: No_Local_Timing_Events271119
Node: No_Nested_Finalization271415
Node: No_Protected_Type_Allocators271697
Node: No_Protected_Types272042
Node: No_Recursion272345
Node: No_Reentrancy272594
Node: No_Relative_Delay272850
Node: No_Requeue_Statements273194
Node: No_Secondary_Stack273533
Node: No_Select_Statements273963
Node: No_Specific_Termination_Handlers274303
Node: No_Specification_of_Aspect274650
Node: No_Standard_Allocators_After_Elaboration275038
Node: No_Standard_Storage_Pools275512
Node: No_Stream_Optimizations275964
Node: No_Streams276507
Node: No_Task_Allocators277342
Node: No_Task_Attributes_Package277607
Node: No_Task_Hierarchy277945
Node: No_Task_Termination278223
Node: No_Tasking278440
Node: No_Terminate_Alternatives278879
Node: No_Unchecked_Access279139
Node: Simple_Barriers279438
Node: Static_Priorities279904
Node: Static_Storage_Size280241
Node: Program Unit Level Restrictions280538
Node: No_Elaboration_Code281320
Node: No_Entry_Queue283639
Node: No_Implementation_Aspect_Specifications284172
Node: No_Implementation_Attributes284622
Node: No_Implementation_Identifiers285071
Node: No_Implementation_Pragmas285438
Node: No_Implementation_Restrictions285863
Node: No_Implementation_Units286377
Node: No_Implicit_Aliasing286769
Node: No_Obsolescent_Features287453
Node: No_Wide_Characters287794
Node: SPARK288264
Node: Implementation Advice289451
Node: Implementation Defined Characteristics334265
Node: Intrinsic Subprograms375146
Node: Intrinsic Operators376214
Node: Enclosing_Entity377307
Node: Exception_Information377853
Node: Exception_Message378406
Node: Exception_Name378931
Node: File379414
Node: Line379837
Node: Shifts and Rotates380273
Node: Source_Location381165
Node: Representation Clauses and Pragmas381627
Node: Alignment Clauses382829
Node: Size Clauses386222
Node: Storage_Size Clauses389029
Node: Size of Variant Record Objects391726
Node: Biased Representation394995
Node: Value_Size and Object_Size Clauses396219
Node: Component_Size Clauses403669
Node: Bit_Order Clauses405417
Node: Effect of Bit_Order on Byte Ordering409073
Node: Pragma Pack for Arrays419009
Node: Pragma Pack for Records423377
Node: Record Representation Clauses425802
Node: Enumeration Clauses429145
Node: Address Clauses430738
Node: Effect of Convention on Representation439044
Node: Determining the Representations chosen by GNAT442843
Node: Standard Library Routines447593
Node: The Implementation of Standard I/O467783
Node: Standard I/O Packages469948
Node: FORM Strings471384
Node: Direct_IO471990
Node: Sequential_IO472879
Node: Text_IO474835
Node: Text_IO Stream Pointer Positioning477367
Node: Text_IO Reading and Writing Non-Regular Files478913
Node: Get_Immediate480793
Node: Treating Text_IO Files as Streams481638
Node: Text_IO Extensions482315
Node: Text_IO Facilities for Unbounded Strings483081
Node: Wide_Text_IO484711
Node: Wide_Text_IO Stream Pointer Positioning491336
Node: Wide_Text_IO Reading and Writing Non-Regular Files492374
Node: Wide_Wide_Text_IO492921
Node: Wide_Wide_Text_IO Stream Pointer Positioning496326
Node: Wide_Wide_Text_IO Reading and Writing Non-Regular Files497411
Node: Stream_IO497973
Node: Text Translation498608
Node: Shared Files499200
Node: Filenames encoding502049
Node: Open Modes502958
Node: Operations on C Streams504288
Node: Interfacing to C Streams511232
Node: The GNAT Library514717
Node: Ada.Characters.Latin_9 (a-chlat9.ads)522387
Node: Ada.Characters.Wide_Latin_1 (a-cwila1.ads)522917
Node: Ada.Characters.Wide_Latin_9 (a-cwila9.ads)523538
Node: Ada.Characters.Wide_Wide_Latin_1 (a-chzla1.ads)524171
Node: Ada.Characters.Wide_Wide_Latin_9 (a-chzla9.ads)524822
Node: Ada.Containers.Formal_Doubly_Linked_Lists (a-cfdlli.ads)525489
Node: Ada.Containers.Formal_Hashed_Maps (a-cfhama.ads)526026
Node: Ada.Containers.Formal_Hashed_Sets (a-cfhase.ads)526540
Node: Ada.Containers.Formal_Ordered_Maps (a-cforma.ads)527047
Node: Ada.Containers.Formal_Ordered_Sets (a-cforse.ads)527558
Node: Ada.Containers.Formal_Vectors (a-cofove.ads)528067
Node: Ada.Command_Line.Environment (a-colien.ads)528555
Node: Ada.Command_Line.Remove (a-colire.ads)528992
Node: Ada.Command_Line.Response_File (a-clrefi.ads)529536
Node: Ada.Direct_IO.C_Streams (a-diocst.ads)530127
Node: Ada.Exceptions.Is_Null_Occurrence (a-einuoc.ads)530669
Node: Ada.Exceptions.Last_Chance_Handler (a-elchha.ads)531128
Node: Ada.Exceptions.Traceback (a-exctra.ads)531657
Node: Ada.Sequential_IO.C_Streams (a-siocst.ads)532092
Node: Ada.Streams.Stream_IO.C_Streams (a-ssicst.ads)532642
Node: Ada.Strings.Unbounded.Text_IO (a-suteio.ads)533201
Node: Ada.Strings.Wide_Unbounded.Wide_Text_IO (a-swuwti.ads)533674
Node: Ada.Strings.Wide_Wide_Unbounded.Wide_Wide_Text_IO (a-szuzti.ads)534195
Node: Ada.Text_IO.C_Streams (a-tiocst.ads)534738
Node: Ada.Text_IO.Reset_Standard_Files (a-tirsfi.ads)535290
Node: Ada.Wide_Characters.Unicode (a-wichun.ads)535899
Node: Ada.Wide_Text_IO.C_Streams (a-wtcstr.ads)536327
Node: Ada.Wide_Text_IO.Reset_Standard_Files (a-wrstfi.ads)536882
Node: Ada.Wide_Wide_Characters.Unicode (a-zchuni.ads)537521
Node: Ada.Wide_Wide_Text_IO.C_Streams (a-ztcstr.ads)537979
Node: Ada.Wide_Wide_Text_IO.Reset_Standard_Files (a-zrstfi.ads)538564
Node: GNAT.Altivec (g-altive.ads)539207
Node: GNAT.Altivec.Conversions (g-altcon.ads)539624
Node: GNAT.Altivec.Vector_Operations (g-alveop.ads)539968
Node: GNAT.Altivec.Vector_Types (g-alvety.ads)540513
Node: GNAT.Altivec.Vector_Views (g-alvevi.ads)540907
Node: GNAT.Array_Split (g-arrspl.ads)541449
Node: GNAT.AWK (g-awk.ads)541859
Node: GNAT.Bounded_Buffers (g-boubuf.ads)542304
Node: GNAT.Bounded_Mailboxes (g-boumai.ads)542728
Node: GNAT.Bubble_Sort (g-bubsor.ads)543079
Node: GNAT.Bubble_Sort_A (g-busora.ads)543516
Node: GNAT.Bubble_Sort_G (g-busorg.ads)544050
Node: GNAT.Byte_Order_Mark (g-byorma.ads)544555
Node: GNAT.Byte_Swapping (g-bytswa.ads)545087
Node: GNAT.Calendar (g-calend.ads)545482
Node: GNAT.Calendar.Time_IO (g-catiio.ads)545959
Node: GNAT.CRC32 (g-crc32.ads)546219
Node: GNAT.Case_Util (g-casuti.ads)546688
Node: GNAT.CGI (g-cgi.ads)547076
Node: GNAT.CGI.Cookie (g-cgicoo.ads)547602
Node: GNAT.CGI.Debug (g-cgideb.ads)548043
Node: GNAT.Command_Line (g-comlin.ads)548380
Node: GNAT.Compiler_Version (g-comver.ads)548826
Node: GNAT.Ctrl_C (g-ctrl_c.ads)549387
Node: GNAT.Current_Exception (g-curexc.ads)549683
Node: GNAT.Debug_Pools (g-debpoo.ads)550255
Node: GNAT.Debug_Utilities (g-debuti.ads)550675
Node: GNAT.Decode_String (g-decstr.ads)551120
Node: GNAT.Decode_UTF8_String (g-deutst.ads)551796
Node: GNAT.Directory_Operations (g-dirope.ads)552141
Node: GNAT.Directory_Operations.Iteration (g-diopit.ads)552607
Node: GNAT.Dynamic_HTables (g-dynhta.ads)553037
Node: GNAT.Dynamic_Tables (g-dyntab.ads)553793
Node: GNAT.Encode_String (g-encstr.ads)554434
Node: GNAT.Encode_UTF8_String (g-enutst.ads)554980
Node: GNAT.Exception_Actions (g-excact.ads)555322
Node: GNAT.Exception_Traces (g-exctra.ads)555807
Node: GNAT.Exceptions (g-except.ads)556165
Node: GNAT.Expect (g-expect.ads)556801
Node: GNAT.Expect.TTY (g-exptty.ads)557497
Node: GNAT.Float_Control (g-flocon.ads)557972
Node: GNAT.Heap_Sort (g-heasor.ads)558507
Node: GNAT.Heap_Sort_A (g-hesora.ads)559041
Node: GNAT.Heap_Sort_G (g-hesorg.ads)559684
Node: GNAT.HTable (g-htable.ads)560170
Node: GNAT.IO (g-io.ads)560584
Node: GNAT.IO_Aux (g-io_aux.ads)561027
Node: GNAT.Lock_Files (g-locfil.ads)561391
Node: GNAT.MBBS_Discrete_Random (g-mbdira.ads)561756
Node: GNAT.MBBS_Float_Random (g-mbflra.ads)562160
Node: GNAT.MD5 (g-md5.ads)562545
Node: GNAT.Memory_Dump (g-memdum.ads)562839
Node: GNAT.Most_Recent_Exception (g-moreex.ads)563229
Node: GNAT.OS_Lib (g-os_lib.ads)563691
Node: GNAT.Perfect_Hash_Generators (g-pehage.ads)564196
Node: GNAT.Random_Numbers (g-rannum.ads)565008
Node: GNAT.Regexp (g-regexp.ads)565400
Node: GNAT.Registry (g-regist.ads)565903
Node: GNAT.Regpat (g-regpat.ads)566401
Node: GNAT.Secondary_Stack_Info (g-sestin.ads)566848
Node: GNAT.Semaphores (g-semaph.ads)567211
Node: GNAT.Serial_Communications (g-sercom.ads)567549
Node: GNAT.SHA1 (g-sha1.ads)567942
Node: GNAT.SHA224 (g-sha224.ads)568259
Node: GNAT.SHA256 (g-sha256.ads)568558
Node: GNAT.SHA384 (g-sha384.ads)568861
Node: GNAT.SHA512 (g-sha512.ads)569164
Node: GNAT.Signals (g-signal.ads)569468
Node: GNAT.Sockets (g-socket.ads)569785
Node: GNAT.Source_Info (g-souinf.ads)570313
Node: GNAT.Spelling_Checker (g-speche.ads)570702
Node: GNAT.Spelling_Checker_Generic (g-spchge.ads)571089
Node: GNAT.Spitbol.Patterns (g-spipat.ads)571549
Node: GNAT.Spitbol (g-spitbo.ads)572127
Node: GNAT.Spitbol.Table_Boolean (g-sptabo.ads)572705
Node: GNAT.Spitbol.Table_Integer (g-sptain.ads)573140
Node: GNAT.Spitbol.Table_VString (g-sptavs.ads)573602
Node: GNAT.SSE (g-sse.ads)574051
Node: GNAT.SSE.Vector_Types (g-ssvety.ads)574539
Node: GNAT.Strings (g-string.ads)574846
Node: GNAT.String_Split (g-strspl.ads)575219
Node: GNAT.Table (g-table.ads)575680
Node: GNAT.Task_Lock (g-tasloc.ads)576304
Node: GNAT.Time_Stamp (g-timsta.ads)576730
Node: GNAT.Threads (g-thread.ads)577205
Node: GNAT.Traceback (g-traceb.ads)577710
Node: GNAT.Traceback.Symbolic (g-trasym.ads)578073
Node: GNAT.UTF_32 (g-utf_32.ads)578339
Node: GNAT.UTF_32_Spelling_Checker (g-u3spch.ads)579059
Node: GNAT.Wide_Spelling_Checker (g-wispch.ads)579565
Node: GNAT.Wide_String_Split (g-wistsp.ads)579982
Node: GNAT.Wide_Wide_Spelling_Checker (g-zspche.ads)580504
Node: GNAT.Wide_Wide_String_Split (g-zistsp.ads)580945
Node: Interfaces.C.Extensions (i-cexten.ads)581489
Node: Interfaces.C.Streams (i-cstrea.ads)581924
Node: Interfaces.CPP (i-cpp.ads)582269
Node: Interfaces.Packed_Decimal (i-pacdec.ads)582694
Node: Interfaces.VxWorks (i-vxwork.ads)583108
Node: Interfaces.VxWorks.IO (i-vxwoio.ads)583519
Node: System.Address_Image (s-addima.ads)584010
Node: System.Assertions (s-assert.ads)584409
Node: System.Memory (s-memory.ads)584834
Node: System.Partition_Interface (s-parint.ads)585602
Node: System.Pool_Global (s-pooglo.ads)586025
Node: System.Pool_Local (s-pooloc.ads)586536
Node: System.Restrictions (s-restri.ads)587073
Node: System.Rident (s-rident.ads)587668
Node: System.Strings.Stream_Ops (s-ststop.ads)588229
Node: System.Task_Info (s-tasinf.ads)588787
Node: System.Wch_Cnv (s-wchcnv.ads)589147
Node: System.Wch_Con (s-wchcon.ads)589634
Node: Interfacing to Other Languages590029
Node: Interfacing to C590511
Node: Interfacing to C++592441
Node: Interfacing to COBOL593811
Node: Interfacing to Fortran594101
Node: Interfacing to non-GNAT Ada code594583
Node: Specialized Needs Annexes595735
Node: Implementation of Specific Ada Features596930
Node: Machine Code Insertions597540
Node: GNAT Implementation of Tasking604736
Node: Mapping Ada Tasks onto the Underlying Kernel Threads605311
Node: Ensuring Compliance with the Real-Time Annex607647
Node: GNAT Implementation of Shared Passive Packages609743
Node: Code Generation for Array Aggregates613146
Node: Static constant aggregates with static bounds614810
Node: Constant aggregates with unconstrained nominal types616416
Node: Aggregates with static bounds617138
Node: Aggregates with non-static bounds618041
Node: Aggregates in assignment statements618641
Node: The Size of Discriminated Records with Default Discriminants620074
Node: Strict Conformance to the Ada Reference Manual623216
Node: Implementation of Ada 2012 Features624973
Node: Obsolescent Features672544
Node: pragma No_Run_Time673048
Node: pragma Ravenscar673671
Node: pragma Restricted_Run_Time674014
Node: GNU Free Documentation License674414
Node: Index699567

End Tag Table
