# Chinese translations for xz package.
# This file is put in the public domain.
#
# pan93412 <pan93412@gmail.com>, 2019.
msgid ""
msgstr ""
"Project-Id-Version: xz 5.2.4\n"
"Report-Msgid-Bugs-To: lasse.collin@tukaani.org\n"
"POT-Creation-Date: 2020-03-17 16:29+0200\n"
"PO-Revision-Date: 2019-04-23 22:00+0800\n"
"Last-Translator: pan93412 <pan93412@gmail.com>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Poedit 2.2.1\n"
"X-Poedit-SourceCharset: UTF-8\n"

#: src/xz/args.c:63
#, c-format
msgid "%s: Invalid argument to --block-list"
msgstr "%s：傳入 --block-list 的參數無效"

#: src/xz/args.c:73
#, c-format
msgid "%s: Too many arguments to --block-list"
msgstr "%s：傳入 --block-list 的參數過多"

#: src/xz/args.c:102
msgid "0 can only be used as the last element in --block-list"
msgstr "0 只能作為 --block-list 的最後一個元素"

#: src/xz/args.c:406
#, c-format
msgid "%s: Unknown file format type"
msgstr "%s：未知檔案格式類型"

#: src/xz/args.c:429 src/xz/args.c:437
#, c-format
msgid "%s: Unsupported integrity check type"
msgstr "%s：不支援的完整性檢查類型"

#: src/xz/args.c:473
msgid "Only one file can be specified with `--files' or `--files0'."
msgstr "「--files」或「--files0」只能指定一個檔案。"

#: src/xz/args.c:541
#, c-format
msgid "The environment variable %s contains too many arguments"
msgstr "%s 環境變數包含過多參數"

#: src/xz/args.c:643
msgid "Compression support was disabled at build time"
msgstr "已在編譯時停用壓縮支援"

#: src/xz/args.c:650
msgid "Decompression support was disabled at build time"
msgstr "已在編譯時停用解壓縮支援"

#: src/xz/coder.c:110
msgid "Maximum number of filters is four"
msgstr "最多只能指定 4 個篩選器"

#: src/xz/coder.c:129
msgid "Memory usage limit is too low for the given filter setup."
msgstr "記憶體用量限制過低，不足以設定指定的篩選器。"

#: src/xz/coder.c:159
msgid "Using a preset in raw mode is discouraged."
msgstr "不建議在 Raw 模式使用設定檔。"

#: src/xz/coder.c:161
msgid "The exact options of the presets may vary between software versions."
msgstr "設定檔的選項可能因軟體版本而有異。"

#: src/xz/coder.c:184
msgid "The .lzma format supports only the LZMA1 filter"
msgstr ".lzma 格式僅支援 LZMA1 篩選器"

#: src/xz/coder.c:192
msgid "LZMA1 cannot be used with the .xz format"
msgstr "LZMA1 不能與 .xz 格式一同使用"

#: src/xz/coder.c:209
msgid "The filter chain is incompatible with --flush-timeout"
msgstr "篩選鏈不相容 --flush-timeout"

#: src/xz/coder.c:215
msgid "Switching to single-threaded mode due to --flush-timeout"
msgstr "因指定 --flush-timeout，因此切換到單執行緒模式"

#: src/xz/coder.c:235
#, c-format
msgid "Using up to %<PRIu32> threads."
msgstr "使用最多 %<PRIu32> 個執行緒。"

#: src/xz/coder.c:251
msgid "Unsupported filter chain or filter options"
msgstr "不支援的篩選鏈或篩選器選項"

#: src/xz/coder.c:263
#, c-format
msgid "Decompression will need %s MiB of memory."
msgstr "解壓縮將需要 %s MiB 的記憶體。"

#: src/xz/coder.c:300
#, c-format
msgid "Adjusted the number of threads from %s to %s to not exceed the memory usage limit of %s MiB"
msgstr "已將 %s 個執行緒調整至 %s，以不超過記憶體用量的 %s MiB 限制"

#: src/xz/coder.c:354
#, c-format
msgid "Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB"
msgstr "已將 LZMA%c 的字典大小從 %s MiB 調整至 %s MiB，以不超過記憶體用量的 %s MiB 限制"

#: src/xz/file_io.c:110 src/xz/file_io.c:118
#, c-format
msgid "Error creating a pipe: %s"
msgstr "建立管線時發生錯誤：%s"

#: src/xz/file_io.c:224
msgid "Failed to enable the sandbox"
msgstr "無法啟用沙盒"

#: src/xz/file_io.c:266
#, c-format
msgid "%s: poll() failed: %s"
msgstr "%s：poll() 失敗：%s"

#. TRANSLATORS: When compression or decompression finishes,
#. and xz is going to remove the source file, xz first checks
#. if the source file still exists, and if it does, does its
#. device and inode numbers match what xz saw when it opened
#. the source file. If these checks fail, this message is
#. shown, %s being the filename, and the file is not deleted.
#. The check for device and inode numbers is there, because
#. it is possible that the user has put a new file in place
#. of the original file, and in that case it obviously
#. shouldn't be removed.
#: src/xz/file_io.c:333
#, c-format
msgid "%s: File seems to have been moved, not removing"
msgstr "%s：檔案似乎已經遷移，不移除"

#: src/xz/file_io.c:340 src/xz/file_io.c:882
#, c-format
msgid "%s: Cannot remove: %s"
msgstr "%s：無法移除：%s"

#: src/xz/file_io.c:366
#, c-format
msgid "%s: Cannot set the file owner: %s"
msgstr "%s：無法設定檔案所有者：%s"

#: src/xz/file_io.c:372
#, c-format
msgid "%s: Cannot set the file group: %s"
msgstr "%s：無法設定檔案群組：%s"

#: src/xz/file_io.c:391
#, c-format
msgid "%s: Cannot set the file permissions: %s"
msgstr "%s：無法設定檔案權限：%s"

#: src/xz/file_io.c:517
#, c-format
msgid "Error getting the file status flags from standard input: %s"
msgstr "從標準輸入取得檔案狀態旗標時發生錯誤：%s"

#: src/xz/file_io.c:574 src/xz/file_io.c:636
#, c-format
msgid "%s: Is a symbolic link, skipping"
msgstr "%s：是個符號連結，跳過"

#: src/xz/file_io.c:665
#, c-format
msgid "%s: Is a directory, skipping"
msgstr "%s：是個目錄，跳過"

#: src/xz/file_io.c:671
#, c-format
msgid "%s: Not a regular file, skipping"
msgstr "%s：不是一般檔案，跳過"

#: src/xz/file_io.c:688
#, c-format
msgid "%s: File has setuid or setgid bit set, skipping"
msgstr "%s：檔案已設定 setuid 或 setgid 位元，跳過"

#: src/xz/file_io.c:695
#, c-format
msgid "%s: File has sticky bit set, skipping"
msgstr "%s：檔案已設定黏性位元（sticky bit），跳過"

#: src/xz/file_io.c:702
#, c-format
msgid "%s: Input file has more than one hard link, skipping"
msgstr "%s：輸入檔有超過一個實際連結 (hard link)，跳過"

#: src/xz/file_io.c:792
#, c-format
msgid "Error restoring the status flags to standard input: %s"
msgstr "將狀態旗標還原到標準輸入時發生錯誤：%s"

#: src/xz/file_io.c:840
#, c-format
msgid "Error getting the file status flags from standard output: %s"
msgstr "從標準輸出取得檔案狀態旗標時發生錯誤：%s"

#: src/xz/file_io.c:1018
#, c-format
msgid "Error restoring the O_APPEND flag to standard output: %s"
msgstr "將 O_APPEND 旗標還原到標準輸出時發生錯誤：%s"

#: src/xz/file_io.c:1030
#, c-format
msgid "%s: Closing the file failed: %s"
msgstr "%s：關閉檔案失敗：%s"

#: src/xz/file_io.c:1066 src/xz/file_io.c:1309
#, c-format
msgid "%s: Seeking failed when trying to create a sparse file: %s"
msgstr "%s：嘗試建立疏鬆檔案時發生搜尋失敗：%s"

#: src/xz/file_io.c:1167
#, c-format
msgid "%s: Read error: %s"
msgstr "%s：讀取時發生錯誤：%s"

#: src/xz/file_io.c:1191
#, c-format
msgid "%s: Error seeking the file: %s"
msgstr "%s：搜尋檔案時發生錯誤：%s"

#: src/xz/file_io.c:1201
#, c-format
msgid "%s: Unexpected end of file"
msgstr "%s：非期望的檔案結尾"

#: src/xz/file_io.c:1260
#, c-format
msgid "%s: Write error: %s"
msgstr "%s：寫入時發生錯誤：%s"

#: src/xz/hardware.c:137
msgid "Disabled"
msgstr "已停用"

#. TRANSLATORS: Test with "xz --info-memory" to see if
#. the alignment looks nice.
#: src/xz/hardware.c:156
msgid "Total amount of physical memory (RAM): "
msgstr "實體記憶體 (RAM) 總量："

#: src/xz/hardware.c:158
msgid "Memory usage limit for compression:    "
msgstr "壓縮記憶體限制：       "

#: src/xz/hardware.c:160
msgid "Memory usage limit for decompression:  "
msgstr "解壓縮記憶體限制：     "

#. TRANSLATORS: Indicates that there is no integrity check.
#. This string is used in tables, so the width must not
#. exceed ten columns with a fixed-width font.
#: src/xz/list.c:65
msgid "None"
msgstr "無"

#. TRANSLATORS: Indicates that integrity check name is not known,
#. but the Check ID is known (here 2). This and other "Unknown-N"
#. strings are used in tables, so the width must not exceed ten
#. columns with a fixed-width font. It's OK to omit the dash if
#. you need space for one extra letter, but don't use spaces.
#: src/xz/list.c:72
msgid "Unknown-2"
msgstr "未知-2"

#: src/xz/list.c:73
msgid "Unknown-3"
msgstr "未知-3"

#: src/xz/list.c:75
msgid "Unknown-5"
msgstr "未知-5"

#: src/xz/list.c:76
msgid "Unknown-6"
msgstr "未知-6"

#: src/xz/list.c:77
msgid "Unknown-7"
msgstr "未知-7"

#: src/xz/list.c:78
msgid "Unknown-8"
msgstr "未知-8"

#: src/xz/list.c:79
msgid "Unknown-9"
msgstr "未知-9"

#: src/xz/list.c:81
msgid "Unknown-11"
msgstr "未知-11"

#: src/xz/list.c:82
msgid "Unknown-12"
msgstr "未知-12"

#: src/xz/list.c:83
msgid "Unknown-13"
msgstr "未知-13"

#: src/xz/list.c:84
msgid "Unknown-14"
msgstr "未知-14"

#: src/xz/list.c:85
msgid "Unknown-15"
msgstr "未知-15"

#: src/xz/list.c:153
#, c-format
msgid "%s: File is empty"
msgstr "%s：檔案是空的"

#: src/xz/list.c:158
#, c-format
msgid "%s: Too small to be a valid .xz file"
msgstr "%s：因過小而不認為是個有效 .xz 檔"

#. TRANSLATORS: These are column headings. From Strms (Streams)
#. to Ratio, the columns are right aligned. Check and Filename
#. are left aligned. If you need longer words, it's OK to
#. use two lines here. Test with "xz -l foo.xz".
#: src/xz/list.c:677
msgid "Strms  Blocks   Compressed Uncompressed  Ratio  Check   Filename"
msgstr " 串流　　區塊　　　 已壓縮　　　 未壓縮　 比例　檢驗碼　檔名"

#: src/xz/list.c:717
#, c-format
msgid "  Streams:            %s\n"
msgstr "  串流：　　　　　　　　　%s\n"

#: src/xz/list.c:719
#, c-format
msgid "  Blocks:             %s\n"
msgstr "  區塊：　　　　　　　　　%s\n"

#: src/xz/list.c:721
#, c-format
msgid "  Compressed size:    %s\n"
msgstr "  壓縮大小：　　　　　　　%s\n"

#: src/xz/list.c:724
#, c-format
msgid "  Uncompressed size:  %s\n"
msgstr "  未壓縮大小：　　　　　　%s\n"

#: src/xz/list.c:727
#, c-format
msgid "  Ratio:              %s\n"
msgstr "  壓縮比：　　　　　　　　%s\n"

#: src/xz/list.c:729
#, c-format
msgid "  Check:              %s\n"
msgstr "  檢驗碼：　　　　　　　　%s\n"

#: src/xz/list.c:730
#, c-format
msgid "  Stream padding:     %s\n"
msgstr "  串流填充：　　　　　　　%s\n"

# 下方的文字因排版有一些障礙，因此暫時不理他。
#. TRANSLATORS: The second line is column headings. All except
#. Check are right aligned; Check is left aligned. Test with
#. "xz -lv foo.xz".
#: src/xz/list.c:758
msgid ""
"  Streams:\n"
"    Stream    Blocks      CompOffset    UncompOffset        CompSize      UncompSize  Ratio  Check      Padding"
msgstr ""
"  串流：\n"
"    Stream    Blocks      CompOffset    UncompOffset        CompSize      UncompSize  Ratio  Check      Padding"

# 下方的文字因排版有一些障礙，因此暫時不理他。
#. TRANSLATORS: The second line is column headings. All
#. except Check are right aligned; Check is left aligned.
#: src/xz/list.c:813
#, c-format
msgid ""
"  Blocks:\n"
"    Stream     Block      CompOffset    UncompOffset       TotalSize      UncompSize  Ratio  Check"
msgstr ""
"  區塊：\n"
"    Stream     Block      CompOffset    UncompOffset       TotalSize      UncompSize  Ratio  Check"

# 下方的文字因排版有一些障礙，因此暫時不理他。
#. TRANSLATORS: These are additional column headings
#. for the most verbose listing mode. CheckVal
#. (Check value), Flags, and Filters are left aligned.
#. Header (Block Header Size), CompSize, and MemUsage
#. are right aligned. %*s is replaced with 0-120
#. spaces to make the CheckVal column wide enough.
#. Test with "xz -lvv foo.xz".
#: src/xz/list.c:825
#, c-format
msgid "      CheckVal %*s Header  Flags        CompSize    MemUsage  Filters"
msgstr "      CheckVal %*s Header  Flags        CompSize    MemUsage  Filters"

#: src/xz/list.c:903 src/xz/list.c:1078
#, c-format
msgid "  Memory needed:      %s MiB\n"
msgstr "  所需記憶體量：　　　　　%s MiB\n"

#: src/xz/list.c:905 src/xz/list.c:1080
#, c-format
msgid "  Sizes in headers:   %s\n"
msgstr "  檔頭中標示大小：　　　　%s\n"

#: src/xz/list.c:906 src/xz/list.c:1081
msgid "Yes"
msgstr "是"

#: src/xz/list.c:906 src/xz/list.c:1081
msgid "No"
msgstr "否"

#: src/xz/list.c:907 src/xz/list.c:1082
#, c-format
msgid "  Minimum XZ Utils version: %s\n"
msgstr "  最小 XZ 工具程式版本：　%s\n"

#. TRANSLATORS: %s is an integer. Only the plural form of this
#. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz".
#: src/xz/list.c:1057
#, c-format
msgid "%s file\n"
msgid_plural "%s files\n"
msgstr[0] "%s 個檔案\n"

#: src/xz/list.c:1070
msgid "Totals:"
msgstr "總計："

#: src/xz/list.c:1071
#, c-format
msgid "  Number of files:    %s\n"
msgstr "  檔案數：　　　　　　　　%s\n"

#: src/xz/list.c:1146
msgid "--list works only on .xz files (--format=xz or --format=auto)"
msgstr "--list 只能在 .xz 檔使用（--format=xz 或 --format=auto）"

#: src/xz/list.c:1152
msgid "--list does not support reading from standard input"
msgstr "--list 不支援從標準輸入讀取"

#: src/xz/main.c:89
#, c-format
msgid "%s: Error reading filenames: %s"
msgstr "%s：讀取檔名時發生錯誤：%s"

#: src/xz/main.c:96
#, c-format
msgid "%s: Unexpected end of input when reading filenames"
msgstr "%s：讀取檔名時遇到非預期的輸入結尾"

#: src/xz/main.c:120
#, c-format
msgid "%s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'?"
msgstr "%s：讀取檔名時發現空字元；或許您想使用「--files0」而非「--files」？"

#: src/xz/main.c:174
msgid "Compression and decompression with --robot are not supported yet."
msgstr "尚未支援搭配 --robot 壓縮和解壓縮。"

#: src/xz/main.c:252
msgid "Cannot read data from standard input when reading filenames from standard input"
msgstr "從標準輸入讀取檔名時，無法從標準輸入讀取資料"

#. TRANSLATORS: This is the program name in the beginning
#. of the line in messages. Usually it becomes "xz: ".
#. This is a translatable string because French needs
#. a space before a colon.
#: src/xz/message.c:728
#, c-format
msgid "%s: "
msgstr "%s："

#: src/xz/message.c:791 src/xz/message.c:841
msgid "Internal error (bug)"
msgstr "內部錯誤（臭蟲）"

#: src/xz/message.c:798
msgid "Cannot establish signal handlers"
msgstr "無法確立信號處理器"

#: src/xz/message.c:807
msgid "No integrity check; not verifying file integrity"
msgstr "沒有完整性檢查；不驗證檔案完整性"

#: src/xz/message.c:810
msgid "Unsupported type of integrity check; not verifying file integrity"
msgstr "未知完整性檢查類型；不驗證檔案完整性"

#: src/xz/message.c:817
msgid "Memory usage limit reached"
msgstr "達到記憶體用量上限"

#: src/xz/message.c:820
msgid "File format not recognized"
msgstr "無法識別檔案格式"

#: src/xz/message.c:823
msgid "Unsupported options"
msgstr "不支援的選項"

#: src/xz/message.c:826
msgid "Compressed data is corrupt"
msgstr "壓縮資料是損壞的"

#: src/xz/message.c:829
msgid "Unexpected end of input"
msgstr "遇到非預期輸入結尾"

#: src/xz/message.c:862
#, c-format
msgid "%s MiB of memory is required. The limiter is disabled."
msgstr "需要 %s MiB 的記憶體。已停用記憶體限制器。"

#: src/xz/message.c:890
#, c-format
msgid "%s MiB of memory is required. The limit is %s."
msgstr "需要 %s MiB 的記憶體。記憶體限制為 %s。"

#: src/xz/message.c:1057
#, c-format
msgid "%s: Filter chain: %s\n"
msgstr "%s：篩選鏈：%s\n"

#: src/xz/message.c:1067
#, c-format
msgid "Try `%s --help' for more information."
msgstr "嘗試「%s --help」取得更多資訊。"

#: src/xz/message.c:1093
#, c-format
msgid ""
"Usage: %s [OPTION]... [FILE]...\n"
"Compress or decompress FILEs in the .xz format.\n"
"\n"
msgstr ""
"用法：%s [選項]... [檔案]...\n"
"用 .xz 格式壓縮，或解壓縮 .xz 格式中的 <檔案>。\n"
"\n"

#: src/xz/message.c:1100
msgid "Mandatory arguments to long options are mandatory for short options too.\n"
msgstr "長選項的必填參數，對短選項也是必填。\n"

#: src/xz/message.c:1104
msgid " Operation mode:\n"
msgstr " 操作模式：\n"

#: src/xz/message.c:1107
msgid ""
"  -z, --compress      force compression\n"
"  -d, --decompress    force decompression\n"
"  -t, --test          test compressed file integrity\n"
"  -l, --list          list information about .xz files"
msgstr ""
"  -z, --compress      強制壓縮\n"
"  -d, --decompress    強制解壓縮\n"
"  -t, --test          測試壓縮檔完整性\n"
"  -l, --list          列出 .xz 檔的資訊"

#: src/xz/message.c:1113
msgid ""
"\n"
" Operation modifiers:\n"
msgstr ""
"\n"
" 操作修飾詞：\n"

#: src/xz/message.c:1116
msgid ""
"  -k, --keep          keep (don't delete) input files\n"
"  -f, --force         force overwrite of output file and (de)compress links\n"
"  -c, --stdout        write to standard output and don't delete input files"
msgstr ""
"  -k, --keep          保留（不刪除）輸入檔\n"
"  -f, --force         強制覆寫輸出檔並（解）壓縮連結\n"
"  -c, --stdout        寫入標準輸出並不刪除輸入檔"

#: src/xz/message.c:1122
msgid ""
"      --single-stream decompress only the first stream, and silently\n"
"                      ignore possible remaining input data"
msgstr ""
"      --single-stream 僅解壓縮第一個串流，再\n"
"                      安靜地忽略可能剩餘的輸入檔"

#: src/xz/message.c:1125
msgid ""
"      --no-sparse     do not create sparse files when decompressing\n"
"  -S, --suffix=.SUF   use the suffix `.SUF' on compressed files\n"
"      --files[=FILE]  read filenames to process from FILE; if FILE is\n"
"                      omitted, filenames are read from the standard input;\n"
"                      filenames must be terminated with the newline character\n"
"      --files0[=FILE] like --files but use the null character as terminator"
msgstr ""
"      --no-sparse     不在解壓縮時建立疏鬆檔案\n"
"  -S, --suffix=.SUF   在壓縮檔加上後綴「.SUF」\n"
"      --files[=檔案]  讀取檔案名稱以處理 <檔案>；如省略 <檔案>\n"
"                      則從標準輸入讀取檔名；檔名必須以換行字元作為結尾\n"
"      --files0[=檔案] 類似 --files 但是以 null 空字元作結尾"

#: src/xz/message.c:1134
msgid ""
"\n"
" Basic file format and compression options:\n"
msgstr ""
"\n"
" 基本檔案格式與壓縮選項：\n"

#: src/xz/message.c:1136
msgid ""
"  -F, --format=FMT    file format to encode or decode; possible values are\n"
"                      `auto' (default), `xz', `lzma', and `raw'\n"
"  -C, --check=CHECK   integrity check type: `none' (use with caution),\n"
"                      `crc32', `crc64' (default), or `sha256'"
msgstr ""
"  -F, --format=格式   用於編碼或解碼的檔案格式；可用的值有：\n"
"                      「auto」（預設）、「xz」、「lzma」及「raw」\n"
"  -C, --check=檢查碼   完整性檢查類型：「none」（請小心使用）、「crc32」、\n"
"                      「crc64」（預設值）或「sha256」"

#: src/xz/message.c:1141
msgid "      --ignore-check  don't verify the integrity check when decompressing"
msgstr "      --ignore-check  不在解壓縮時驗證完整性"

#: src/xz/message.c:1145
msgid ""
"  -0 ... -9           compression preset; default is 6; take compressor *and*\n"
"                      decompressor memory usage into account before using 7-9!"
msgstr ""
"  -0 ... -9           壓縮設定檔；預設值為 6；使用 7-9 前請考慮\n"
"                      壓縮和解壓縮所使用的記憶體！"

#: src/xz/message.c:1149
msgid ""
"  -e, --extreme       try to improve compression ratio by using more CPU time;\n"
"                      does not affect decompressor memory requirements"
msgstr ""
"  -e, --extreme       使用更多 CPU 時間以嘗試改善壓縮比；\n"
"                      不影響解壓縮器的記憶體需求"

#: src/xz/message.c:1153
msgid ""
"  -T, --threads=NUM   use at most NUM threads; the default is 1; set to 0\n"
"                      to use as many threads as there are processor cores"
msgstr ""
"  -T, --threads=NUM   使用最多 NUM 個執行緒；預設為 1；設成 0 則使用所有的\n"
"                      處理機核心"

#: src/xz/message.c:1158
msgid ""
"      --block-size=SIZE\n"
"                      start a new .xz block after every SIZE bytes of input;\n"
"                      use this to set the block size for threaded compression"
msgstr ""
"      --block-size=大小\n"
"                      輸入每 <大小> 位元組後，開始一個新 .xz 區塊；\n"
"                      使用此功能以設定多執行緒壓縮的區塊大小"

#: src/xz/message.c:1162
msgid ""
"      --block-list=SIZES\n"
"                      start a new .xz block after the given comma-separated\n"
"                      intervals of uncompressed data"
msgstr ""

#: src/xz/message.c:1166
msgid ""
"      --flush-timeout=TIMEOUT\n"
"                      when compressing, if more than TIMEOUT milliseconds has\n"
"                      passed since the previous flush and reading more input\n"
"                      would block, all pending data is flushed out"
msgstr ""

#: src/xz/message.c:1172
#, no-c-format
msgid ""
"      --memlimit-compress=LIMIT\n"
"      --memlimit-decompress=LIMIT\n"
"  -M, --memlimit=LIMIT\n"
"                      set memory usage limit for compression, decompression,\n"
"                      or both; LIMIT is in bytes, % of RAM, or 0 for defaults"
msgstr ""
"      --memlimit-compress=限制\n"
"      --memlimit-decompress=限制\n"
"  -M, --memlimit=限制\n"
"                      限制壓縮、解壓縮或兩者的記憶體用量上限；\n"
"                      <限制> 可以是位元組、記憶體百分比 (%)、或 0（預設值）"

#: src/xz/message.c:1179
msgid ""
"      --no-adjust     if compression settings exceed the memory usage limit,\n"
"                      give an error instead of adjusting the settings downwards"
msgstr ""
"      --no-adjust     若壓縮設定超過記憶體用量上限，請給出\n"
"                      錯誤而非下調設定"

#: src/xz/message.c:1185
msgid ""
"\n"
" Custom filter chain for compression (alternative for using presets):"
msgstr ""
"\n"
" 自訂壓縮篩選鏈（使用設定檔時選用）："

#: src/xz/message.c:1194
msgid ""
"\n"
"  --lzma1[=OPTS]      LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n"
"  --lzma2[=OPTS]      more of the following options (valid values; default):\n"
"                        preset=PRE reset options to a preset (0-9[e])\n"
"                        dict=NUM   dictionary size (4KiB - 1536MiB; 8MiB)\n"
"                        lc=NUM     number of literal context bits (0-4; 3)\n"
"                        lp=NUM     number of literal position bits (0-4; 0)\n"
"                        pb=NUM     number of position bits (0-4; 2)\n"
"                        mode=MODE  compression mode (fast, normal; normal)\n"
"                        nice=NUM   nice length of a match (2-273; 64)\n"
"                        mf=NAME    match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n"
"                        depth=NUM  maximum search depth; 0=automatic (default)"
msgstr ""
"\n"
"  --lzma1[=操作]      LZMA1 或 LZMA2；<操作> 是以下選項中的 0 個或以上選項\n"
"  --lzma2[=操作]      （有效值; 預設）：\n"
"                        preset=PRE 將選項重設至某設定檔的選項 (0-9[e])\n"
"                        dict=NUM   字典大小 (4KiB - 1536MiB; 8MiB)\n"
"                        lc=NUM     文字內文位元數 (0-4; 3)\n"
"                        lp=NUM     文字位置位元數 (0-4; 0)\n"
"                        pb=NUM     位置位元數    (0-4; 2)\n"
"                        mode=模式  壓縮模式 (fast, normal; normal)\n"
"                        nice=NUM   符合項目的 nice 長度 (2-273; 64)\n"
"                        mf=名稱    尋找符合搜尋器 (hc3, hc4, bt2, bt3, bt4; bt4)\n"
"                        depth=NUM  最大搜尋深度；0=自動（預設）"

#: src/xz/message.c:1209
msgid ""
"\n"
"  --x86[=OPTS]        x86 BCJ filter (32-bit and 64-bit)\n"
"  --powerpc[=OPTS]    PowerPC BCJ filter (big endian only)\n"
"  --ia64[=OPTS]       IA-64 (Itanium) BCJ filter\n"
"  --arm[=OPTS]        ARM BCJ filter (little endian only)\n"
"  --armthumb[=OPTS]   ARM-Thumb BCJ filter (little endian only)\n"
"  --sparc[=OPTS]      SPARC BCJ filter\n"
"                      Valid OPTS for all BCJ filters:\n"
"                        start=NUM  start offset for conversions (default=0)"
msgstr ""
"\n"
"  --x86[=OPTS]        x86 BCJ 篩選器 (32 位元和 64 位元)\n"
"  --powerpc[=OPTS]    PowerPC BCJ 篩選器（僅大端序）\n"
"  --ia64[=OPTS]       IA-64 (Itanium) BCJ 篩選器\n"
"  --arm[=OPTS]        ARM BCJ 篩選器（僅小端序）\n"
"  --armthumb[=OPTS]   ARM-Thumb BCJ 篩選器（僅小端序）\n"
"  --sparc[=OPTS]      SPARC BCJ 篩選器\n"
"                      所有 BCJ 篩選器可用的 OPTS：\n"
"                        start=NUM  轉換起始位移（預設值=0）"

#: src/xz/message.c:1221
msgid ""
"\n"
"  --delta[=OPTS]      Delta filter; valid OPTS (valid values; default):\n"
"                        dist=NUM   distance between bytes being subtracted\n"
"                                   from each other (1-256; 1)"
msgstr ""

#: src/xz/message.c:1229
msgid ""
"\n"
" Other options:\n"
msgstr ""
"\n"
" 其他選項：\n"

#: src/xz/message.c:1232
msgid ""
"  -q, --quiet         suppress warnings; specify twice to suppress errors too\n"
"  -v, --verbose       be verbose; specify twice for even more verbose"
msgstr ""
"  -q, --quiet         隱藏警告訊息；指定兩次也一併隱藏錯誤訊息\n"
"  -v, --verbose       輸出較詳細內容；指定兩次更詳細輸出"

#: src/xz/message.c:1237
msgid "  -Q, --no-warn       make warnings not affect the exit status"
msgstr "  -Q, --no-warn       即使有警告，退出狀態碼仍不變"

#: src/xz/message.c:1239
msgid "      --robot         use machine-parsable messages (useful for scripts)"
msgstr "      --robot         使用機器可解析訊息（適合用於指令稿）"

#: src/xz/message.c:1242
msgid ""
"      --info-memory   display the total amount of RAM and the currently active\n"
"                      memory usage limits, and exit"
msgstr "      --info-memory   顯示記憶體總量和使用中的記憶體用量限制後退出"

#: src/xz/message.c:1245
msgid ""
"  -h, --help          display the short help (lists only the basic options)\n"
"  -H, --long-help     display this long help and exit"
msgstr ""
"  -h, --help          顯示較短說明（僅列出基本選項）\n"
"  -H, --long-help     顯示較長說明後退出"

#: src/xz/message.c:1249
msgid ""
"  -h, --help          display this short help and exit\n"
"  -H, --long-help     display the long help (lists also the advanced options)"
msgstr ""
"  -h, --help          顯示較短說明後退出\n"
"  -H, --long-help     顯示較長說明（也列出進階選項）"

#: src/xz/message.c:1254
msgid "  -V, --version       display the version number and exit"
msgstr "  -V, --version       顯示版本號碼後退出"

#: src/xz/message.c:1256
msgid ""
"\n"
"With no FILE, or when FILE is -, read standard input.\n"
msgstr ""
"\n"
"如果未指定 <檔案>，或 <檔案> 是 -，則從標準輸入讀取。\n"

#. TRANSLATORS: This message indicates the bug reporting address
#. for this package. Please add _another line_ saying
#. "Report translation bugs to <...>\n" with the email or WWW
#. address for translation bugs. Thanks.
#: src/xz/message.c:1262
#, c-format
msgid "Report bugs to <%s> (in English or Finnish).\n"
msgstr "請回報臭蟲至 <%s>（使用英文或芬蘭語）。\n"

#: src/xz/message.c:1264
#, c-format
msgid "%s home page: <%s>\n"
msgstr "%s 首頁：<%s>\n"

#: src/xz/message.c:1268
msgid "THIS IS A DEVELOPMENT VERSION NOT INTENDED FOR PRODUCTION USE."
msgstr "此為開發版本，不打算在生產環境使用。"

#: src/xz/options.c:86
#, c-format
msgid "%s: Options must be `name=value' pairs separated with commas"
msgstr "%s：選項形式必須為以逗號分隔的「name=value」值對"

#: src/xz/options.c:93
#, c-format
msgid "%s: Invalid option name"
msgstr "%s：選項名稱無效"

#: src/xz/options.c:113
#, c-format
msgid "%s: Invalid option value"
msgstr "%s：選項值無效"

#: src/xz/options.c:247
#, c-format
msgid "Unsupported LZMA1/LZMA2 preset: %s"
msgstr "不支援的 LZMA1/LZMA2 設定檔：%s"

#: src/xz/options.c:355
msgid "The sum of lc and lp must not exceed 4"
msgstr "lc 和 lp 的總和不能超過 4"

#: src/xz/options.c:359
#, c-format
msgid "The selected match finder requires at least nice=%<PRIu32>"
msgstr "選取的符合搜尋工具需要至少 nice=%<PRIu32>"

#: src/xz/suffix.c:133 src/xz/suffix.c:258
#, c-format
msgid "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout"
msgstr "%s：搭配 --format=raw 時，除非寫入標準輸出，否則需要 --suffix=.SUF"

#: src/xz/suffix.c:164
#, c-format
msgid "%s: Filename has an unknown suffix, skipping"
msgstr "%s：檔名有未知後綴，跳過"

#: src/xz/suffix.c:185
#, c-format
msgid "%s: File already has `%s' suffix, skipping"
msgstr "%s：檔案已有「%s」後綴，跳過"

#: src/xz/suffix.c:393
#, c-format
msgid "%s: Invalid filename suffix"
msgstr "%s：檔名後綴無效"

#: src/xz/util.c:71
#, c-format
msgid "%s: Value is not a non-negative decimal integer"
msgstr "%s：數值不是非負數十進位整數"

#: src/xz/util.c:113
#, c-format
msgid "%s: Invalid multiplier suffix"
msgstr "%s：乘數後綴無效"

#: src/xz/util.c:115
msgid "Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30)."
msgstr "有效的後綴有「KiB」(2^10)、「MiB」(2^20) 及「GiB」(2^30)。"

#: src/xz/util.c:132
#, c-format
msgid "Value of the option `%s' must be in the range [%<PRIu64>, %<PRIu64>]"
msgstr "選項「%s」的數值必須在 [%<PRIu64>, %<PRIu64>] 範圍內"

#: src/xz/util.c:267
msgid "Empty filename, skipping"
msgstr "空檔名，跳過"

#: src/xz/util.c:281
msgid "Compressed data cannot be read from a terminal"
msgstr "不能從終端機讀入已壓縮資料"

#: src/xz/util.c:294
msgid "Compressed data cannot be written to a terminal"
msgstr "不能將已壓縮資料寫入終端機"

#: src/common/tuklib_exit.c:40
msgid "Writing to standard output failed"
msgstr "寫入標準輸出失敗"

#: src/common/tuklib_exit.c:43
msgid "Unknown error"
msgstr "未知錯誤"

#~ msgid "Sandbox is disabled due to incompatible command line arguments"
#~ msgstr "由於指定不相容的指令列參數，已停用沙盒"

#~ msgid "Sandbox was successfully enabled"
#~ msgstr "已成功啟用沙盒"
